Radio Shack Speaker System 40 1441 User Guide

I‚q„g†u€  
P„†ghxq @xpu€s 5y‚xuruqp  
S‚qgwq„ S‘ꢀ†qy  
"ꢁꢂꢃ""ꢃ  
Thank you for purchasing the RadioShack Portable Folding  
Amplified Speaker System. It is ideal for use with your notebook  
computer or personal stereo. The dual 2 1/4-inch (57 mm)  
full-range speakers are for use near a notebook computer. The  
built-in cable allows easy connection and cable storage. And,  
for your convenience, the speakers fold to fit into the supplied  
carrying pouch.  
1.Slide power to OFF and turn the volume down.  
2.Place the opened speakers on a level surface.  
3.Insert the stereo plug into the audio output jack of  
your notebook computer or personal stereo.  
4.Slide power to ON.  
5.Adjust the volume as desired.  
6.To disassemble the speaker system, slide power  
to OFF. Then, disconnect the stereo plug from the  
audio output jack and route the speaker cable  
along the recess of the left speaker cabinet.  
7.Place the stereo plug into the plug holder, and  
then close the speaker cabinets.  
P‰q„u€s †tq S‚qgwq„ꢀ  
6g††q„‘ P‰q„  
1.Slide the power switch to OFF.  
2.Remove the battery compartment cover.  
3.Install three AA batteries, matching the  
polarity (+ and -) symbols marked inside the battery compartment.  
4.Replace the battery compartment cover.  
5.Slide the power switch to ON.  
57 P‰q„  
You also can power the system using a 6V, 300mA AC adapter and a size M Adaptaplug  
(neither supplied). Both are available at your local RadioShack store.  
Battery  
Compartment  
T i€€qi† † g€ 57 gpg‚†q„(  
DC 6V  
Jack  
1.Attach a size M Adaptaplug to the adapter, with its tip set to positive.  
2.Slide the power switch to OFF. Then, connect the AC adapter’s barrel plug to the portable  
system’s DC 6V jack.  
3.Plug the other end of the AC adapter into a standard AC outlet.  
Vqtuixq 6g††q„‘ P‰q„  
1.Connect the DC adapter (not supplied) cord’s barrel plug to the speaker system’s DC 6V jack.  
2.Unplug the cigarette lighter and plug the large end of the DC adapter into the cigarette lighter socket.  
CAUTIONS:  
You must use a Class 2 power source that supplies 6V DC and delivers at least 300 mA. Its center tip must be set to positive and its plug must fit the system’s DC 6V jack. Using an adapter that does  
not meet these specifications can damage the system or adapter.  
Do not leave the adapter plugged into the cigarette lighter socket or connected to the speaker system when you are not using it.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

PYLE Audio TV Video Accessories PAVS001 User Guide
Pyramid Car Audio DVD Player PDVD44 User Guide
Quinny Stroller Moodd User Guide
Radio Shack Musical Instrument Amplifier PPG260A User Guide
Roadstar MP3 Docking Station HIF 9000IP User Guide
Rockford Fosgate Car Amplifier T10001 BD User Guide
Ryobi Grinder AG400 User Guide
Saitek Portable Speaker 3D 380 User Guide
Samsung Home Theater System HT C6900W User Guide
Sanitaire Sander SC6010 User Guide