Radio Shack Speaker 21 549 User Guide

%0$0"'ZVGPUKQP"5RGCMGT  
C
21-549  
OWNER’S MANUAL — Please read before using this equipment.  
Your CB Extension Speaker is designed for use with any CB Transceiver which has an  
External Speaker jack, and for either mobile or base station application. It is acoustically  
designed to cover the range of speech frequencies, and thus greatly enhances voice  
intelligibility (even under high-noise mobile conditions).  
Limited Ninety-Day Warranty  
This product is warranted by RadioShack against  
manufacturing defects in material and workmanship  
under normal use for ninety (90) days from the date  
of purchase from RadioShack company-owned  
stores and authorized RadioShack franchisees and  
dealers. EXCEPT AS PROVIDED HEREIN, Ra-  
dioShack MAKES NO EXPRESS WARRANTIES  
AND ANY IMPLIED WARRANTIES, INCLUDING  
THOSE OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE, ARE LIMITED IN  
DURATION TO THE DURATION OF THE WRITTEN  
LIMITED WARRANTIES CONTAINED HEREIN. EX-  
CEPT AS PROVIDED HEREIN, RadioShack SHALL  
HAVE NO LIABILITY OR RESPONSIBILITY TO  
CUSTOMER OR ANY OTHER PERSON OR EN-  
TITY WITH RESPECT TO ANY LIABILITY, LOSS  
OR DAMAGE CAUSED DIRECTLY OR INDI-  
RECTLY BY USE OR PERFORMANCE OF THE  
PRODUCT OR ARISING OUT OF ANY BREACH  
OF THIS WARRANTY, INCLUDING, BUT NOT LIM-  
ITED TO, ANY DAMAGES RESULTING FROM IN-  
Speed Nuts  
Bracket  
Tapping Screws  
Thumb Screw  
CONVENIENCE,  
LOSS  
OF  
TIME,  
DATA,  
PROPERTY, REVENUE, OR PROFIT OR ANY IN-  
DIRECT, SPECIAL, INCIDENTAL, OR CONSE-  
QUENTIAL DAMAGES, EVEN IF RadioShack HAS  
BEEN ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGES.  
Some states do not allow limitations on how long an  
implied warranty lasts or the exclusion or limitation of  
incidental or consequential damages, so the above  
limitations or exclusions may not apply to you.  
In the event of a product defect during the warranty  
period, take the product and the RadioShack sales  
receipt as proof of purchase date to any RadioShack  
store. RadioShack will, at its option, unless other-  
wise provided by law: (a) correct the defect by prod-  
uct repair without charge for parts and labor; (b)  
replace the product with one of the same or similar  
design; or (c) refund the purchase price. All replaced  
parts and products, and products on which a refund  
is made, become the property of RadioShack. New  
or reconditioned parts and products may be used in  
the performance of warranty service. Repaired or re-  
placed parts and products are warranted for the re-  
mainder of the original warranty period. You will be  
charged for repair or replacement of the product  
made after the expiration of the warranty period.  
This warranty does not cover: (a) damage or failure  
caused by or attributable to acts of God, abuse, acci-  
dent, misuse, improper or abnormal usage, failure to  
follow instructions, improper installation or mainte-  
nance, alteration, lightning or other incidence of ex-  
cess voltage or current; (b) any repairs other than  
those provided by a RadioShack Authorized Service  
Facility; (c) consumables such as fuses or batteries;  
(d) cosmetic damage; (e) transportation, shipping or  
insurance costs; or (f) costs of product removal, in-  
stallation, set-up service adjustment or reinstallation.  
This warranty gives you specific legal rights, and you  
may also have other rights which vary from state to  
state.  
Speaker  
5. Insert the speaker's plug into the  
+056#..#6+10  
Transceiver's External Speaker (or  
Remote Speaker) jack. Secure the wire  
out of the way (use clamps or ties as  
Carefully consider a convenient location  
where your speaker will not get in the way,  
and yet project sound to the best advantage.  
You can mount it above or below a  
dashboard, on a rear deck or any other  
location. For mobile installations, keep in  
mind the safety and convenience of vehicle  
operation.  
required).  
RadioShack Customer Relations, 200 Taylor Street,  
6th Floor, Fort Worth, TX 76102  
1. Use the mounting bracket as a template  
and mark holes for drilling.  
12/99  
3
16  
2. Drill two / " (4.5 mm) holes. Take care  
."%#76+10".  
Avoid mounting in direct sunlight or high  
that you don't drill into existing wiring or  
trim.  
temperature areas.  
3. Mount the bracket with two tapping  
screws and speed nuts.  
Avoid running the wire across sharp metal  
edges or moving parts.  
Don't mount where it will block air  
conditioning or heating vents.  
4. Fasten the speaker between the bracket  
using the two thumb screws. Swivel the  
Speaker as desired and tighten the  
thumb screws securely.  
© 2002 RadioShack Corporation. All Rights Reserved.  
RadioShack and RadioShack.com are trademarks used by RadioShack Corp.  
01A02  
C
21-549  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radica Games Handheld Game System 76069 User Guide
Radio Shack Headphones PLVH2 User Guide
RCA Computer Monitor J27435 User Guide
RCA CRT Television Televison User Guide
RCA Telephone 2 9220 User Guide
Ricoh Scanner G413 User Guide
Rosen Entertainment Systems Car Video System R6400V User Guide
Ryobi Blower RY09056 User Guide
Samson Home Theater System XP106 User Guide
Sanyo Projector PLC SU60 User Guide