Radio Shack DVD VCR Combo DVD VCR User Guide

16-3286  
Owner’s Manual  
Please read before using this unit.  
DVD/CD Player with Video Cassette Recorder  
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.  
Supplied Accessory  
• Remote control  
• RF cable  
• Audio/Video cables  
• Owner’s Manual  
®
©2006. RadioShack Corporation.  
All rights reserved. Presidian, RadioShack and  
RadioShack.com are trademarks used by  
RadioShack Corporation.  
Owner's Manual  
Table of Contents  
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Recording & OTR (One Touch Recording) . . . . . . . . . . . . . . . . 12  
Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Hints for OTR and Timer Recording . . . . . . . . . . . . . . . . . . . . . 13  
Copying a Video Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
MTS System (Multi-Channel Television Sound) . . . . . . . . . . . 14  
When You Receive or Record a Program Broadcast in MTS . . . 14  
When You Play Back a Tape Recorded in Hi-Fi Stereo . . . . . . . 14  
Precautions  
Laser Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Avoid the Hazards of Electrical Shock and Fire. . . . . . . . . . . . . . 4  
Moisture Condensation Warning. . . . . . . . . . . . . . . . . . . . . . . . . 4  
Notice for Progressive Scan Outputs . . . . . . . . . . . . . . . . . . . . . 4  
About Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Symbols Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
About the Video Cassettes and Discs . . . . . . . . . . . . . . . . . . . 5  
Playable Video Cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
DVD Functions  
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Search Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Track Search / Title/Chapter Search / Time Search . . . . . . . . . 17  
Marker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Repeat / Random / Programmed Playback . . . . . . . . . . . . . . 18  
Repeat Playback / Repeat A-B Playback /  
Random Playback / Programmed Playback. . . . . . . . . . . . . . . . 18  
Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Subtitle Language / Audio Language / Camera Angle /  
Black Level Setting / Stereo Sound Mode / Virtual Surround . . . . . . . 19  
DVD Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
LANGUAGE Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
DISPLAY Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
PARENTAL Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
OTHERS Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Reset to the Default Setting (Except for PARENTAL Setting). . . 23  
Setup  
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Hint for Cable Box or Satellite Box . . . . . . . . . . . . . . . . . . . . . . . 6  
Connection to an Audio System . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Connection to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Front & Rear Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Preparation for Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Turn on the Unit for the First Time . . . . . . . . . . . . . . . . . . . . . . . 8  
Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Function Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Front Panel Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
VCR/DVD Switching. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Installing the Batteries for the Remote Control . . . . . . . . . . . . . 10  
Information  
Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Language List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Limited Ninety-Day Warranty . . . . . . . . . . . . . . . . . . . . . . . . . 24  
VCR Functions  
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Auto Repeat. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Quick Use Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Basic TV Connection  
Cable TV Antenna  
signal  
or  
Cable TV Antenna  
signal  
or  
(Back of DVD/VCR)  
(Back of TV)  
AC  
outlets  
(Back of TV)  
4
ANT-IN  
Plug in  
2
ANT-OUT  
Disconnect  
3
Connect  
From DVD/VCR  
From TV  
Connect  
RF cable (supplied)  
Please refer to “Connections” on page 6.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
1. Read Instructions - All the safety and operating instruc-  
tions should be read before the appliance is operated.  
2. Retain Instructions- The safety and operating instructions  
should be retained for future reference.  
3. Heed Warnings - All warnings on the appliance and in  
the operating instructions should be adhered to.  
4. Follow Instructions - All operating and use instructions  
should be followed.  
proper grounding of the mast and supporting structure,  
grounding of the lead-in wire to an antenna discharge  
unit, size of grounding conductors, location of antenna-  
discharge unit, connection to grounding electrodes, and  
requirements for the grounding electrode. (Fig. A)  
FIGURE A  
ANTENNA  
EXAMPLE OF ANTENNA GROUNDING  
AS PER NATIONAL ELECTRICAL CODE  
LEAD  
WIRE  
GROUND  
CLAMP  
5. Cleaning - Unplug this video product from the wall outlet  
before cleaning. Do not use liquid cleaners or aerosol  
cleaners. Use a damp cloth for cleaning.  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
EXCEPTION: A product that is meant for uninterrupted  
service and, that for some specific reason, such as the  
possibility of the loss of an authorization code for a CATV  
converter, is not intended to be unplugged by the user  
for cleaning or any other purpose, may exclude the refer-  
ence to unplugging the appliance in the cleaning descrip-  
tion otherwise required in item 5.  
6. Attachments - Do not use attachments not recommend-  
ed by the video product manufacturer as they may cause  
hazards.  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMP  
NEC – NATIONAL ELECTRICAL CODE  
S2898A  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
14. Lightning - For added protection for this video product  
during a lightning storm, or when it is left unattended and  
unused for long periods of time, unplug it from the wall  
outlet and disconnect the antenna or cable system. This  
will prevent damage to the video product due to lightning  
and power-line surges.  
15. Power Lines - An outside antenna system should not be  
located in the vicinity of overhead power lines or other  
electric light or power circuits, or where it can fall into  
such power lines or circuits. When installing an outside  
antenna system, extreme care should be taken to keep  
from touching such power lines or circuits as contact with  
them might be fatal.  
16. Overloading - Do not overload wall outlets and extension  
cords as this can result in a risk of fire or electric shock.  
17. Object and Liquid Entry - Never push objects of any kind  
into this video product through any openings as they may  
touch dangerous voltage points or short-out parts that  
could result in a fire or electric shock. Never spill liquid of  
any kind on the video product.  
18. Servicing - Do not attempt to service this video product  
yourself as opening or removing covers may expose you  
to dangerous voltage or other hazards. Refer all servicing  
to qualified service personnel.  
19. Damage Requiring Service - Unplug this video product  
from the wall outlet and refer servicing to qualified ser-  
vice personnel under the following conditions:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the  
video product.  
7. Water and Moisture- Do not use this video product near  
water, for example, near a bath tub, wash bowl, kitchen  
sink, or laundry tub, in a wet basement, or near a swim-  
ming pool, and the like.  
8. Accessories - Do not place this video product on an unsta-  
ble cart, stand, tripod, bracket, or table. The video product  
may fall, causing serious injury to a child or adult, and seri-  
ous damage to the appliance. Use only with a cart, stand,  
tripod, bracket, or table recommended by the manufactur-  
er, or sold with the video product. Any mounting of the  
appliance should follow the manufactur-  
er's instructions and should use a  
mounting accessory recommended by  
the manufacturer. An appliance and cart  
combination should be moved with care.  
Quick stops, excessive force, and  
uneven surfaces may cause the appli-  
ance and cart combination to overturn.  
9. Ventilation - Slots and openings in the cabinet are provided  
for ventilation and to ensure reliable operation of the video  
product and to protect it from overheating, and these open-  
ings must not be blocked or covered. The openings should  
never be blocked by placing the video product on a bed,  
sofa, rug, or other similar surface. This video product  
should not be placed in a built-in installation such as a  
bookcase or rack unless proper ventilation is provided or  
the manufacturer's instructions have been adhered to.  
10. Power Sources - This video product should be operated  
only from the type of power source indicated on the mark-  
ing label. If you are not sure of the type of power supply to  
your home, consult your appliance dealer or local power  
company. For products intended to operate from battery  
power, or other sources, refer to the operating instructions.  
11. Grounding or Polarization - This video product is  
equipped with a polarized alternating-current line plug (a  
plug having one blade wider than the other). This plug will  
fit into the power outlet only one way. This is a safety fea-  
ture. If you are unable to insert the plug fully into the out-  
let, try reversing the plug. If the plug should still fail to fit,  
contact your electrician to replace your obsolete outlet.  
Do not defeat the safety purpose of the polarized plug.  
12. Power Cord Protection - Power supply cords should be  
routed so that they are not likely to be walked on or  
pinched by items placed upon or against them, paying  
particular attention to cords at plugs, convenience recep-  
tacles, and the point where they exit from the appliance.  
13. Outdoor Antenna Grounding - If an outside antenna or  
cable system is connected to the video product, be sure  
the antenna or cable system is grounded so as to provide  
some protection against voltage surges and built-up static  
charges. Article 810 of the National Electrical Code,  
ANSI/NFPA No. 70, provides information with regard to  
c. If the video product has been exposed to rain or water.  
d. If the video product does not operate normally by following  
the operating instructions. Adjust only those controls that  
are covered by the operating instructions as an improper  
adjustment of other controls may result in damage and will  
often require extensive work by a qualified technician to  
restore the video product to its normal operation.  
e. If the video product has been dropped or damaged in  
any way.  
f. When the video product exhibits a distinct change in per-  
formance this indicates a need for service.  
20. Replacement Parts - When replacement parts are  
required, be sure the service technician has used  
replacement parts specified by the manufacturer or have  
the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric  
shock or other hazards.  
21. Safety Check - Upon completion of any service or repairs  
to this video product, ask the service technician to per-  
form safety checks to determine that the video product is  
in proper operating condition.  
22. Heat - This video product should be situated away from  
heat sources such as radiators, heat registers, stoves, or  
other products (including amplifiers) that produce heat.  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Location  
Maintenance  
For safety and optimum performance of this unit:  
• Do not stand the unit up vertically. Install the unit in  
a horizontal and stable position. Do not place any-  
thing directly on top of the unit. Do not place the unit  
directly on top of the TV.  
• Shield it from direct sunlight and keep it away from  
sources of intense heat. Avoid dusty or humid  
places. Avoid places with insufficient ventilation for  
proper heat dissipation. Do not block the ventilation  
holes on the sides of the unit. Avoid locations sub-  
ject to strong vibration or strong magnetic fields.  
• Be sure to remove a disc and unplug the AC  
power cord from the outlet before carrying the unit.  
SERVICING  
• Please refer to relevant topics on the “Troubleshooting  
Guide” on page 23 before returning the product.  
If this unit becomes inoperative, do not try to correct  
the problem by yourself. There are no user-service-  
able parts inside. Turn off, unplug the power plug, and  
please consult with your local RadioShack store.  
CLEANING THE CABINET  
Use a soft cloth slightly moistened with a mild deter-  
gent solution. Do not use a solution containing alco-  
hol, spirits, ammonia or abrasive.  
CLEANING DISCS  
When a disc becomes dirty, clean it with a cleaning  
cloth. Wipe the disc from the center to out. Do not  
wipe in a circular motion.  
Do not use solvents such as benzine, thinner, com-  
mercially available cleaners, detergent, abrasive  
cleaning agents or antistatic spray intended for ana-  
log records.  
Avoid the Hazards of Electrical Shock and Fire  
• Do not handle the power cord with wet hands.  
• Do not pull on the power cord when disconnecting it  
from AC wall outlet. Grasp it by the plug.  
• If, by accident, water is spilled on this unit, unplug  
the power cord immediately and take the unit to  
®
your local RadioShack store for servicing.  
CLEANING THE DISC LENS  
• Do not put your fingers or objects into the unit cas-  
sette holder.  
If this unit still does not perform properly although you  
refer to the relevant sections and to “Troubleshooting  
Guide” in this Owner’s Manual, the laser optical pick-  
up unit may be dirty. Please consult with your local  
RadioShack store for inspection and cleaning of the  
laser optical pickup unit.  
Moisture Condensation Warning  
Moisture condensation may occur inside the unit  
when it is moved from a cold place to a warm place,  
or after heating a cold room or under conditions of  
high humidity. Do not use this unit at least for 2 hours  
until its inside gets dry.  
DISC HANDLING  
When you handle a disc, hold it by its edge and try  
not to touch the surface of the disc.  
Always store the disc in its protective case when it  
is not used.  
Notice for Progressive Scan Outputs  
Consumers should note that not all high definition  
television sets are fully compatible with this product  
and may cause artifacts to be displayed in the picture.  
In case of picture problems with 525 progressive scan  
output, it is recommended that the user switch the  
connection to the ‘standard definition’ output. If there  
are questions regarding your TV set compatibility with  
this 525p DVD player, please contact RadioShack  
store.  
AUTO HEAD CLEANING  
Automatically cleans video heads as you insert or  
remove a cassette, so you can see a clear picture.  
Playback picture may become blurred or interrupted  
while the TV program reception is clear. Dirt accu-  
mulated on the video heads after a long period of  
use, or the usage of rental or worn tapes can cause  
this problem. If a streaky or snowy picture appears  
during playback, the video heads in your unit may  
need to be cleaned.  
About Copyright  
1. Please visit your local RadioShack store and pur-  
chase a good quality VHS Video Head Cleaner.  
2. If a Video Head Cleaner does not solve the prob-  
lem, please consult with your local RadioShack  
store.  
Unauthorized copying, broadcasting, public perfor-  
mance and lending of discs are prohibited.  
This product incorporates copyright protection tech-  
nology that is protected by U.S. patents and other  
intellectual property rights. Use of this copyright pro-  
tection technology must be authorized by Macrovision,  
and is intended for home and other limited viewing  
uses only unless otherwise authorized by Macrovision.  
Reverse engineering or disassembly is prohibited.  
Hint  
• Remember to read the instructions along with the video head  
cleaner before use.  
• Clean video heads only when problems occur.  
Note to CATV system installer  
Symbols Used in This Manual  
This reminder is provided to call the CATV system  
installer’s attention to Article 820-40 of the NEC that  
provides guidelines for proper grounding and, in par-  
ticular, specifies that the cable ground should be  
connected to the grounding system of the building,  
as close to the point of cable entry as practical.  
The following symbols appear in some head-  
ings in this manual.  
:Description refers to playback or recording  
of video cassette tapes.  
VCR  
:Description refers to playback of DVD-  
Video discs.  
DVD-V  
Manufactured under license from Dolby  
Laboratories. “Dolby” and the double-D symbol  
are trademarks of Dolby Laboratories.  
:Description refers to playback of Audio  
CDs.  
CD  
EN  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the Video Cassettes and Discs  
Playable Video Cassettes  
Use only cassettes marked  
with this unit.  
Playable Discs  
Recorded  
signals  
Playable  
Mark (logo)  
discs  
Disc size  
Disc types  
Region code  
DVD-Video  
or  
* 1, 2, 4, 6, 10  
Example  
12 cm  
or  
8 cm  
Title 1  
Title 2  
Digital video  
(MPEG2)  
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1  
Chapter 2  
DVD-RW  
DVD-R  
-
* 1, 3, 4, 5,  
6, 7, 9, 10  
Audio CD  
* 4, 6, 10  
Example  
12 cm  
or  
-
Digital audio  
Track 1  
Track 2  
Track 5  
Track 6  
Track 3  
Track 4  
CD-RW  
CD-R  
8 cm  
* 4, 5, 6,  
9, 10  
is a trademark of DVD Format/Logo Licensing Corporation.  
If you cannot play back a disc which bears one of the marks above, check the following notes.  
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.  
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.  
*3: Discs recorded in the VR (Video Recording) format cannot be played back.  
*4: Scratched or stained discs may not be played back.  
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or spe-  
cial properties of discs.  
*6:You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back.  
Even if they are played back, the sound or video quality will be compromised.  
*7:You may play back the unfinalized DVD-RW/R disc recorded in the video format on our brand’s DVD recorder. However,  
depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may  
not be smooth, etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying  
the DVD recorder.  
*8: Only the discs recorded in the video format and finalized can be played back.  
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at  
all or normally (the picture or sound may not be smooth, etc.).  
*9: If there is too much recording space left on a disc (the used portion is less than 55 mm across), it may not play back properly.  
*10: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.  
Unplayable Discs  
¡
NEVER play back the following discs. Otherwise, malfunction may result!  
DVD-RAM / DVD-Audio / CD-i / Photo CD / Video CD / DVD with region codes other than 1 or ALL /  
DTS-CD /  
DVD-ROM for personal computers / CD-ROM for personal computers  
¡
On the following disc, the sound MAY NOT be heard.  
Super Audio CD  
NOTE: Only the sound recorded on the normal CD layer can be delivered.  
The sound recorded on the high density Super Audio CD layer cannot be delivered.  
¡
Any other discs without compatibility indications  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Connections  
Please refer to “Basic TV Connection” on the front page before you use this unit.  
RF Output Channel  
If channel 3 is already occupied for broadcasting,  
1) Set your TV to channel 4.  
2) Insert a pre-recorded tape into this unit.  
5) After a few seconds, press and hold  
Hint  
[PLAY B] on the unit for 3 seconds.  
The RF output channel does  
not change when you adjust  
tracking during playback. In case  
RF output channel changes, you  
can easily switch it back just  
start the playback again then  
The RF output channel will change to channel 4  
from channel 3 and you will see a playback picture.  
In this case, “ch04” will appears on the front panel.  
3) Press [OUTPUT] on the unit so that the VCR  
OUTPUT light is lit.  
• When a picture does not appear on the TV  
screen, repeat step 4).  
If “VCR” light does not appear on the display of  
this unit, press [VCR/TV] on the remote control.  
press and hold [PLAY  
the unit for 3 seconds.  
B
] on  
6) Press [STOP C] to stop playback.  
4) Press [PLAY B] once.  
Hint for Cable Box or Satellite Box  
(Back of VCR/DVD)  
(Back of VCR/DVD)  
Connection A  
Connection B  
(Cable box or  
ANT-IN  
ANT-IN  
Satellite box)  
Antenna  
IN  
OUT  
ANT-OUT  
Satellite  
or Cable  
TV signal  
ANT-OUT  
or Basic  
RF cable  
(supplied)  
RF cable  
(supplied)  
CABLE  
TV signal  
(Back of TV)  
(Back of TV)  
Select this connection when you want to view or record a  
scrambled channel. With this connection, channels cannot  
be changed on the unit. You can view or record ONLY the  
channels you have selected on the cable box or the satellite  
box.  
Select this connection when you want to change channels  
on the VCR/DVD. With this connection, you may watch one  
channel while recording another.  
You may not view or record a scrambled channel.  
To select channels of the cable box or satellite box  
• While you are recording, only the recorded channel can be  
viewed.  
1) At the cable box or satellite box, select channel 3 or 4 (the  
same channel as the VCR/DVD’s RF output channel).  
• Refer to “RF Output Channel”.  
2) At the TV, select the same channel as the output channel  
(3 or 4) of the cable box or satellite box.  
3) Turn on the VCR/DVD by pressing [POWER], and then,  
press [VCR/TV]. The “POWER” and “VCR” lights on the  
front panel will appear. Then, select the channel you want  
to view or record.  
To select channels of the cable box or satellite box  
1) Turn on the unit by pressing [POWER], then press  
[VCR/TV].The “POWER” and “VCR” lights on the front  
panel will appear, then press [SKIP/CH.  
/ /  
G K H L] to  
select channel 3 or 4 (the same channel as the output  
channel of the cable box or satellite box).  
• If you use the channel 4, you need to change the unit’s  
RF output to channel 4. Refer to “RF Output Channel”.  
2) At the TV, select channel 3 or 4 (the same channel as you  
have selected at step 1).  
3) On the cable box or satellite box, select the channel you  
want to view or record.  
To playback a tape  
Follow the steps 1) to 2) above. Then, playback a tape.  
• Refer to “Playback” on page 11.  
To view one channel while recording another  
1) While you are recording on the VCR/DVD, press [VCR/TV]  
so that the “VCR” light disappears on the VCR/DVD.  
2) At the cable box, select the channel you want to view.  
Connection to an Audio System  
Dolby Digital decoder,  
Stereo system  
Method 1  
Method 2  
MD deck or DAT deck  
L
R
COAXIAL  
Analog audio  
input jacks  
Digital audio  
input jack  
AUDIO  
Audio Coaxial  
Digital cable  
(commercially  
available)  
Audio cable  
(supplied)  
DVD  
AUDIO S-VIDEO  
OUT OUT  
COMPONENT  
DIGITAL  
VIDEO OUT  
DVD/VCR  
AUDIO OUT  
VCR  
DVD  
AUDIO S-VIDEO  
OUT OUT  
AUDIO OUT  
COMPONENT  
DIGITAL  
VIDEO OUT  
AUDIO OUT  
L
DIGITAL  
AUDIO OUT  
(Analog)  
AUDIO OUT  
L
COAXIAL  
R
DVD/VCR  
R
or  
SETUP QUICK  
>
DOLBY DIGITAL  
Setting  
>
(DVD mode only)  
Connection  
Connecting to a Dolby Digital decoder  
for Dolby Digital audio output.  
Connecting to the other equipment (an MD deck  
or DAT deck etc.) without Dolby Digital decoder.  
Hint  
BITSTREAM  
• Playing a DVD using incorrect settings may generate  
noise distortion and may also damage the speakers.  
PCM  
* To complete these settings, refer to pages 20-21.  
Hint  
The audio source on a disc in a Dolby Digital multi channel surround  
format cannot be recorded as digital sound by an MD or DAT deck.  
• By hooking this unit up to a Multi-channel Dolby Digital  
decoder, you can enjoy high-quality Dolby Digital multi  
channel surround sound as heard in the movie theaters.  
• Playing a DVD using incorrect settings may generate  
noise distortion and may also damage the speakers.  
EN  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection to a TV  
Method 1  
Method 2  
Method 3  
Basic Audio  
Good picture  
Better picture  
Best picture  
COMPONENT  
VIDEO IN  
AUDIO IN  
TV  
S-VIDEO IN  
VIDEO IN  
Y
L
R
CB/PB  
CR/PR  
Audio cable  
(supplied)  
Video  
cable  
(supplied)  
S-Video  
cable  
(commercially  
Component Video cables  
(commercially available)  
available)  
DVD  
AUDIO S-VIDEO  
OUT OUT  
DVD/VCR  
DVD/VCR  
VCR  
DVD  
DVD/VCR  
AUDIO OUT  
VCR  
DVD  
COMPONENT  
COMPONENT  
VIDEO OUT  
AUDIO S-VIDEO  
OUT OUT  
VIDEO OUT  
DIGITAL  
AUDIO S-VIDEO  
OUT  
OUT  
AUDIO OUT  
Y
L
DVD  
AUDIO S-VIDEO  
OUT OUT  
DVD/VCR  
AUDIO OUT AUDIO IN  
VCR  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO OUT  
L
Y
L
L
L
R
C
B
/
C
/
/
PB  
B
R
R
COAXIAL  
VIDEO OUT  
VIDEO IN  
R
-
P
B
C
PR  
R
VIDEO OUT  
R
C
/
PR  
R
or  
(Analog) AUDIO OUT  
VIDEO OUT  
S-VIDEO OUT  
COMPONENT VIDEO OUT  
Hint  
Connect this unit directly to the TV. If the Audio/Video cables are connected to a VCR, pictures may be distorted due to the copy protection system.  
• The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.  
If your TV is compatible with 525p (480p) progressive scanning and you want to enjoy that high  
quality picture;  
Set “PROGRESSIVE” to “ON” in the DISPLAY menu, so that the “P.SCAN” on the front panel display appears. Details are  
on page 21.  
If your TV is not compatible with progressive scanning;  
Use this unit in interlace mode. Make sure  
PROGRESSIVE  
is set to OFFand P.SCAN light on the front of the unit is off.  
Progressive scanning mode can be set to off either in the DISPLAY menu or by pressing and holding [PLAY B] on the front of  
the unit for more than 5 seconds. Details are on page 21.  
After you have completed connections  
• Press the input selector button (usually TV/VIDEO, INPUT or AUX) on your TV to switch an appropriate external input  
channel (usually near channel 0) for viewing the picture from this unit.  
If the picture does not appear, also refer to the manual accompanying your TV.  
Input modes for common TV brands (Example)  
• Listed below are inputs for common brand name TV’s.  
Admiral:  
Curtis Mathis:  
GE:  
AUX  
Panasonic:  
RCA:  
TV/VIDEO  
LINE1, LINE2, 00, 90, 91, 92, 93  
INPUT, TV/VCR, 00, 90, 91, 92, 93  
INPUT, TV/VCR, 00, 90, 91, 92, 93  
Samsung:  
Sanyo:  
TV/VIDEO  
Hitachi:  
INPUT, AUX  
VIDEO  
JVC:  
VIDEO, VIDEO1, VIDEO2, VIDEO3  
Sharp:  
00  
Kenwood:  
LXI-Series:  
Magnavox:  
AUX  
00  
Sony:  
VIDEO1, VIDEO2, VIDEO3  
Toshiba:  
Zenith:  
TV/GAME  
00  
AUX CHANNEL  
Front & Rear Terminals  
DVD AUDIO OUT (analog) jacks DVD/VCR AUDIO OUT jacks  
AUDIO IN jacks  
Connect the supplied audio  
Connect the supplied audio  
Connect an audio cable com-  
ing from the audio out jacks of  
cables here through the Audio cable here through the audio  
ANT-IN jack  
Connect your antenna  
or cable box here.  
In jacks of a television or other In jacks of a television or other a camcorder, another VCR or  
audio equipment. (DVD only)  
audio equipment.  
an audio source here.  
DVD  
AUDIO S-VIDEO  
OUT OUT  
DVD/VCR  
AUDIO OUT  
VCR  
AUDIO IN  
DIGITAL AUDIO OUT COAXIAL jack  
Connect an optional coaxial digital  
audio cable here through the coaxial  
digital audio in jack of a decoder or  
audio receiver. (DVD only)  
COMPONENT  
VIDEO OUT  
DIGITAL  
ANT-IN  
VIDEO  
L
-
AUDIO  
-
R
R  
VCR  
AUDIO OUT  
L
IAUDIO IN  
ANT-IN  
Y
L
L
L
R
R
VIDEO OUT  
R
I
O IN  
C
PB/  
ANT-OUT  
B
ANT-OUT  
COAXIAL  
VIDEO IN  
R
C
PR/  
[Front  
Panel]  
R
[Rear Panel]  
VIDEO IN jack  
S-VIDEO OUT jack  
Connect an optional  
S-Video cable here  
through the S-video  
in jack of a televi-  
sion. (DVD only)  
ANT-OUT jack  
Connect the  
Connect a cable coming  
from the video out jack of  
a camcorder, another VCR  
or an audio-visual source  
(laser disc player, video  
disc player, etc.) here.  
supplied RF  
COMPONENT VIDEO OUT jacks  
Connect optional component  
video cables here through the  
component video in jacks of a  
television. (DVD only)  
DVD/VCR VIDEO OUT jack  
Connect the supplied video  
cable here through the TV’s  
video in jack.  
cable to the  
antenna input  
jack on your TV.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation for Use  
Turn on the Unit for the First  
Time  
To Add or Delete Channels  
1) Press [MENU] until the main menu  
appears.  
3
4
CLOCK SET  
MONTH DAY YEAR  
1 0 0 2 – – – –  
/
or  
VCR  
HOUR MINUTE AM/PM  
– – – – – –  
2) Select “CHANNEL SET UP” by  
pressing [K/L]. Then, press [B].  
3) Select “MANUAL SET UP” by  
pressing [K/L]. Then, press [B].  
4) Enter the desired channel number by  
pressing [K/L] or  
[SKIP/CH. G/KK H/LL].  
5) Add or Delete it from memory by  
pressing [s/B] so that “ADD” or  
“DELETE” flashes on the TV screen  
accordingly.  
:
VCR  
1
Select the current day.  
Turn on the TV and set it  
to channel 3.  
• If channel 3 is already occupied for broadcasting,  
see“RF Output Channel” section on page 6.  
• If your antenna is connected to an antenna ampli-  
fier, the amplifier’s gain adjustment may need to  
be temporarily reduced in order for Auto-Setup to  
program all channels properly.  
CLOCK SET  
MONTH DAY  
1 0 0 2  
YEAR  
2 0 0 6  
or  
/
HOUR MINUTE  
– – – –  
AM/PM  
– –  
:
6) Exit the Preset mode by pressing  
[CLEAR/C.RESET].  
2
POWER  
Remote Control TV Screen  
Select the current year.  
To Preset the Channel Again  
LANGUAGE SELECT  
1) Press [MENU] until the main menu appears.  
B ENGLISH  
FRANCAIS  
ESPAÑOL  
[ON]  
2) Select CHANNEL SET UPby pressing  
[K/L], then press [B].  
5
6
or  
CLOCK SET  
3) Select AUTO SET UPby using [K/L],  
then press [B]. After scanning, the tuner  
stops on the lowest memorized channel.  
MONTH DAY  
YEAR  
or  
1 0 0 2 MON 2 0 0 6  
/
HOUR MINUTE  
0 5 – –  
AM/PM  
– –  
:
To Change the On-Screen Language  
1) Press [MENU] until the main menu appears.  
Select the current hour.  
2) Select LANGUAGE SELECTby pressing  
[K/L], then press [B].  
3
CH 01  
3) Select “ENGLISH” , “FRANCAIS” or  
“ESPAÑOLby pressing [K/LL] , then press  
[CLEAR/C.RESET] to exit.  
AUTO SET UP  
CLOCK SET  
MONTH DAY  
YEAR  
or  
Hint  
1 0 0 2 MON 2 0 0 6  
/
• If you accidentally select Spanish or French  
and need English: Press [MENU] and  
choose SELEC. IDIOMA or SELECTION  
LANGUE. Press [B] and select ENGLISH.  
Finally, press [CLEAR/C.RESET].  
HOUR MINUTE  
0 5 4 0  
AM/PM  
– –  
:
Do you connect the cable from the cable box or  
the satellite box to the unit’s ANT-IN jack?  
YES  
Select the current minute.  
To add or delete channels in this unit,  
[SKIP/CH.  
/ /  
G K H L] button works on  
Yes Press [MENU]  
the channel number memorized in this  
unit,  
L] works on all.  
to exit.  
[
K
/
Refer to “Hint for Cable Box or  
Satellite Box” section on page 6.  
7
8
CLOCK SET  
NO  
Clock Setup  
MONTH DAY  
YEAR  
1 0 0 2 MON 2 0 0 6  
/
VCR  
No Please wait for a few minutes.  
or  
HOUR MINUTE  
0 5 4 0  
AM/PM  
P M AM  
B PM  
After scanning...  
VCR  
:
The tuner stops on the lowest memorized channel.  
You can select only the channels memorized  
- M E N U -  
1
MENU  
TIMER PROGRAMMING  
AUTO REPEAT [OFF]  
CHANNEL SET UP  
B CLOCK SET  
LANGUAGE SELECT  
AUDIO OUT  
TV STEREO  
SAP  
in this unit by using [SKIP/CH.  
(or [CHANNEL  
/ /  
G K H L]  
Select “AM” or “PM”.  
K
/
L]).  
• If "AUTO SET UP" appears on the TV  
screen again, check the cable connections.  
To exit the CLOCK SET  
screen  
[ON]  
Then, press [B] once again.  
or  
• If the clock is not set, the  
CLOCK SET screen  
appears when you press  
[MENU]. In this case, go  
to step 2).  
Hint  
• Repeat these steps only if either there  
was a power failure or this unit has been  
unplugged for more than 30 seconds.  
Hint  
To Select a Channel  
You can select a channel by using  
the Number buttons or  
[SKIP/CH. G/K H/LL].  
Notes for using the Number buttons:  
• When selecting cable channels which  
are higher than 99, enter channel  
numbers as a three-digit number. (For  
example: 117, press [1], [1], [7])  
You must precede single-digit chan-  
nel numbers with a zero (for example:  
02, 03, 04 and so on).  
To go back one step, press [s] (during  
steps 2) to 7) ).  
Your clock setting will be lost if either there  
is a power failure or this unit has been  
unplugged for more than 30 seconds.  
2
CLOCK SET  
MONTH DAY  
1 0 – –  
YEAR  
– – – –  
or  
/
HOUR MINUTE AM/PM  
– – – – – –  
:
Select the current month.  
EN  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function Overview  
Front Panel Display  
Lights up when power is on.  
DVD output mode  
DVD-V  
CD  
Lights up when the  
A-B repeat function  
is on.  
Displays a type of the disc  
which is inserted on the tray.  
• DVD: DVD disc  
OPEN/CLOSE  
POWER  
A
• CD: Audio CD  
STOP/EJECT  
PLAY  
STOP  
PLAY  
Lights up when the  
progressive scan  
system is activated.  
P
/
A
O
P
O
CHANNEL  
VCR OUTPUT DVD  
Lights up when the  
repeat function is on.  
VIDEO  
L
-
AUDIO  
-
R
L
K
E
REW F.FWD  
D
REC/OTR  
P.SCAN  
DVD  
CD  
Lights up when  
the ALL repeat  
function is on.  
Displays how long the current title  
or track has been played back. When  
a chapter or track is switched, the  
number of a new title, chapter or  
track is displayed.  
Lights up when the  
inserted disc comes  
to a pause.  
No disc inserted  
/ cannot read disc  
Lights up when the inserted  
disc is being played back.  
Lights up when playing back  
in slow mode. (DVD)  
Opening the tray  
VCR output mode  
VCR  
Closing the tray  
Loading the disc  
*Lights up  
*Lights up when  
Lights up when  
when a tape is  
the timer recording or an  
OTR recording has been set.  
the VCR/DVD is  
in VCR position.  
This light does not  
appear when the  
VCR/DVD is in  
TV position.  
in the VCR/DVD.  
Lights up during  
playback when  
the repeat function  
is on.  
*Lights up during a recording.  
Flashes when a recording  
is paused.  
When a disc or tape is  
being played back  
VCR  
REC  
PM  
Lights up when  
the playback is  
in still or slow mode.  
Lights up when  
current time is P.M.  
Works as a tape counter(hour,minute,second).  
Also displays a channel number,  
tape speed, remaining time for OTR or  
current time.  
Lights up when the inserted  
cassette is being played  
back.  
*
and  
mark will disappear when you set VCR/DVD in DVD  
,
mode. However, the function indicated by each mark is still working.  
VCR/DVD Switching  
Because this product is a combination of a VCR and  
a DVD player, you must select first which compo-  
nent you wish to operate with [OUTPUT].  
OPEN/CLOSE  
POWER  
A
OPEN/CLOSE  
POWER  
/EJECT  
SPEED  
AUDIO  
STOP/EJECT  
PLAY  
STOP  
PLA  
Y
P
/
A
O
P
O
CHANNEL  
VCR OUTPUT DVD  
VIDEO  
L
-
AUDIO  
-
R
L
K
E
REW  
F.FWD  
D
REC/OTR  
1
4
7
2
5
8
3
6
9
SKIP/CH.  
VCR/TV  
SLOW  
VCR MODE  
Press [VCR] on the remote control.  
(Verify that the VCR OUTPUT light is lit.)  
VCR button  
DVD button  
0
+1 0  
DISPLAY  
VCR  
DVD  
PAUSE  
PLAY  
STOP  
DVD MODE  
VCR OUTPUT light  
DVD OUTPUT light  
OUTPUT button  
REC/OTR  
MENU  
Press [DVD] on the remote control.  
ENTER  
VCR OUTPUT DVD  
(Verify that the DVD OUTPUT light is lit.)  
SETUP TOP MENU  
RETURN  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
ZOOM  
SUBTITLE  
T-SET  
ANGLE  
REPEAT  
A-B  
Hint  
• Pressing only [OUTPUT] on the front panel DOES NOT  
switch the mode of the remote control. You MUST select  
the correct mode on the remote control.  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
VCR mode  
DVD mode  
Disc/Tape  
OPEN/CLOSE  
(BAulpthtaobnetical order)  
POWER  
/EJECT  
SPEED  
AUDIO  
1
4
7
2
5
8
0
3
1
4
7
2
5
8
3
6
9
To select channel.  
The +10 button has no effect  
in VCR mode.  
6
To select chapter or title  
SKIP/CH.  
To select track directly.  
9
directly.  
VCR/TV  
SLOW  
+1 0  
To search forward/backward  
through a disc.  
To begin slow forward/  
reverse playback during the  
pause mode.  
0
VCR  
+1 0  
DVD  
DISPLAY  
PAUSE  
To search forward/backward  
To forward/backward a tape.  
through a disc.  
PLAY  
STOP  
To select an item  
on the VCR Menu.  
To advance to the  
next VCR Menu.  
To go back one step  
during clock and  
timer setting.  
REC/OTR  
MENU  
ENTER  
To move the cursor and  
To move the cursor and  
ENTER  
determine its position.  
determine its position.  
SETUP TOP MENU  
RETURN  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
ZOOM  
A-B  
SUBTITLE  
T-SET  
To repeat between your  
To repeat between your  
ANGLE  
REPEAT  
A-B  
chosen point A and B.  
chosen point A and B.  
ANGLE  
AUDIO  
To select camera angles on  
a disc.  
To select audio languages on To select STEREO,  
a disc.  
L-ch or R-ch.  
To clear the markers.  
To remove status number in  
program input.  
To clear the markers.  
To clear the numbers  
entered incorrectly.  
To cancel the point for A-B  
repeat.  
CLEAR/  
C. RESET  
To exit the VCR Menu.  
To clear the numbers entered  
incorrectly.  
To reset the tape counter.  
Installing the Batteries  
for the Remote Control  
To cancel the point for A-B  
repeat.  
DISPLAY  
DVD  
To display the current disc  
To display the current disc  
To display the current time,  
Install two AA batteries (commer-  
cially available) matching the polar-  
ity indicated inside battery com-  
partment of the remote control.  
mode.  
mode.  
tape counter, and channel.  
To select the DVD output  
mode.  
To activate the remote  
control in DVD mode.  
To select the DVD output  
mode.  
To activate the remote control  
in DVD mode.  
MENU  
MODE  
To call up the Menu  
To call up the VCR Menu.  
on a disc.  
1
2
3
To arrange the playing  
To set black level on/off.  
order or play randomly.  
To set virtual surround on/off.  
To set virtual surround on/off.  
OPEN/CLOSE  
/EJECT  
To eject the video cassette  
from the cassette  
compartment.  
To open or close the disc  
To open or close the disc  
tray.  
tray.  
To pause tape playback or  
PAUSE  
To pause disc playback.  
To advance playback  
one frame at a time.  
recording.  
To pause disc playback.  
To advance playback  
one frame at a time.  
To begin disc playback.  
To begin disc playback.  
To begin tape playback.  
PLAY  
POWER  
To turn the unit on or off.  
To turn the unit on or off.  
To turn the unit on or off.  
REC/OTR  
To start a recording or  
One Touch Recording.  
REPEAT  
RETURN  
To play a chapter or title  
To play a track or disc  
repeatedly.  
repeatedly.  
To return to the previous  
To return to the previous  
operation in menu.  
operation in menu.  
Keep in mind the following when using  
the remote control:  
Make sure that there is no obsta-  
cle between the remote control  
and the remote sensor on the unit.  
SEARCH  
MODE  
To search track.  
To search chapter, title or time.  
To set or search the markers.  
To call up the index or time  
To search time.  
search menu.  
To set or search the markers.  
SETUP  
To call up the DVD setup  
To call up the DVD setup  
menu.  
menu.  
• The maximum operable ranges  
from the unit are as follows.  
- Line of sight: approx. 23 feet (7m)  
- Either side of center:  
approx. 16 feet (5m) within 30°  
- Above: approx. 16 feet (5m)  
within 15°  
To change channels.  
To adjust the tracking  
manually during playback.  
SKIP/CH.  
SKIP/CH.  
To skip chapters or titles.  
To skip tracks.  
SLOW  
To view the tape in slow  
motion.  
SPEED  
STOP  
To select the recording  
speed.  
- Below: approx. 10 feet (3m)  
within 30°  
To stop playback.  
To stop playback.  
To stop playback or recording.  
SUBTITLE  
T-SET  
OPEN/CLOSE  
To put the VCR into standby  
POWER  
A
To select subtitles on a disc.  
STOP/EJECT  
PLA  
Y
STOP  
PLA  
Y
P
/
A
O
P
O
CHANNEL  
V
C
R
O
U
T
P
U
T
DVD  
VIDEO  
L
-
AUDIO  
-
R
L
K
mode for a Timer Recording.  
E
REW  
F.FWD  
D
REC/OTR  
TOP MENU  
VCR  
To call up the Top Menu  
on a disc.  
To select the VCR output  
mode.  
To activate the remote  
control in VCR mode.  
Hint  
VCR/TV  
ZOOM  
To select DVD position or  
To select CD position or TV To select VCR position or  
position. TV position.  
TV position.  
• Do not mix alkaline and manganese  
batteries.  
To magnify part of a picture.  
(x2/x4)  
• Do not mix old and new batteries.  
EN  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR Functions  
Playback  
Before:  
Turn on the TV and set it to  
channel 3.  
4
OPEN/CLOSE  
POWER  
/EJECT  
4 3  
2
1
SPEED  
AUDIO  
If channel 3 is already occupied for broadcasting,  
see “RF Output Channel” on page 6.  
1
4
7
2
5
8
3
6
9
SKIP/CH.  
VCR  
VCR/TV  
SLOW  
VCR  
POWER  
0
+1 0  
DISPLAY  
VCR  
DVD  
PAUSE  
1
2
4
To start  
playback  
STOP/EJECT  
PLAY  
P
/
A
O
VIDEO  
L
-
AUDIO  
-
R
E
REW F.FWD  
D
REC/OTR  
PLAY  
2
PLAY  
STOP  
3
REC/OTR  
To stop  
playback  
To eject the  
cassette  
OPEN/CLOSE  
/EJECT  
3
Hint  
STOP  
• When a tape without record tab is inserted, the unit will start playback automatically.  
Tracking will be automatically adjusted upon playback. To adjust the tracking manually, press  
[SKIP/CH. GG/KK H/L] (or [CHANNEL KK/LL]).  
Other Operations  
To cue or review picture during playback  
Counter Reset  
Hint  
(Picture Search)  
Press [gg / h]([F.FWD gg] or [REW hh] ).  
• Press it again and the unit will search in super high  
speed (in the SLP mode only).  
Press [CLEAR/C.RESET].  
Still/Slow mode  
will be automati-  
cally canceled  
To play back in slow motion (Slow mode)  
after 5 minutes to  
prevent damage  
to the tape and  
the video head.  
Press [SLOW] during playback or the still mode.  
• If the noise bars appear on the TV screen, you can  
reduce it by pressing [SKIP/CH. G/KK H/L](or  
[CHANNEL K/L]).  
To freeze the picture on TV screen during play-  
back (Still mode)  
To return to play-  
back from the  
Picture  
Press [PAUSE kk]. Each time you press the button,  
Auto Rewind  
the picture will be forwarded by one frame.  
If the picture begins to vibrate vertically during the still  
mode, stabilize the picture by pressing  
When a tape reaches its end during playback, fast-for-  
ward or recording (except Timer Recording and One  
Touch Recording), the tape will automatically rewind  
to the beginning. After rewinding finishes, the unit will  
eject the tape.  
Search/Still/  
Slow mode,  
[SKIP/CH.  
G
/
K H  
/
L] (or [CHANNEL  
/
K L]).  
press [PLAY B].  
• If the picture is distorted or rolling vertically, adjust  
the vertical hold control on your TV if equipped.  
Hint  
Index Search  
Time Search  
• The Index Mark will be made automatically  
at the beginning of each recording.  
• The time gap between Index Marks should  
be greater than 1 minute for SP mode, 2  
minutes for LP mode and 3 minutes for  
SLP mode.  
• Index Search and Time Search functions  
are not available during recording.  
• Press [STOP C] to stop the search.  
You can skip the program backward You can search backward and for-  
and forward by the Index Mark.  
ward a specific length of time on a  
VCR  
tape.  
VCR  
VCR  
VCR  
• Insert a tape into this unit.  
• Insert a tape into this unit.  
SEARCH  
MODE  
1
INDEX SEARCH  
– –  
SEARCH  
MODE  
1
TIME SEARCH  
– : – –  
• If a tape ends during a search, your  
search will be canceled and the tape will  
rewind to the beginning.  
Press once.  
Press twice.  
2
INDEX SEARCH  
0 3  
2
Select the desired length of  
time for fast forwarding or  
rewinding.  
or  
01 ~ 20  
TIME SEARCH  
CURRENT PROGRAM  
2 : 5 0  
Beginning  
of the tape  
End of  
the tape  
or  
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5  
02 01 01 02 03  
INDEX MARK  
0:01~ 9:59  
(1 minute~9 hours  
and 59 minutes)  
3
3
To rewind  
To rewind  
ss  
ss  
To fast forward  
To fast forward  
BB  
BB  
After searching,  
After searching,  
4
PLAYB  
4
PLAYB  
EN  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Repeat  
This function will playback a tape  
repeatedly from the beginning  
- M E N U -  
MENU  
- M E N U -  
1
2
TIMER PROGRAMMING  
B AUTO REPEAT [ON]  
CHANNEL SET UP  
CLOCK SET  
TIMER PROGRAMMING  
B AUTO REPEAT [OFF]  
CHANNEL SET UP  
CLOCK SET  
when the tape reaches to the end.  
VCR  
LANGUAGE SELECT  
AUDIO OUT  
LANGUAGE SELECT  
AUDIO OUT  
VCR  
TV STEREO  
SAP  
[ON]  
TV STEREO  
SAP  
[ON]  
or  
Hint  
To cancel Auto Repeat, follow step 1) above. Then, press [B], so that [OFF] appears beside AUTO REPEAT. Press [CLEAR/C.RESET] to exit.  
If menu remains on the TV screen at step 2), press [CLEAR/C.RESET] to exit.  
The Auto Repeat playback will start automatically if you set “AUTO REPEAT” to “ON” in the stop mode.  
Recording  
Recording & OTR (One Touch Recording)  
Before:  
5 6  
4
1
2
3
6
Turn on the TV and set it to  
channel 3.  
• If channel 3 is already occupied for  
broadcasting, see “RF Output Channel” on page 6.  
OPEN/CLOS  
OPEN/CLOSE  
/EJECT  
POWER  
SPEED  
AUDIO  
POWER  
A
VCR  
1
4
7
2
5
8
3
6
9
VCR  
SKIP/CH.  
STOP/EJECT  
PLAY  
P
/
A
O
CHANNEL  
VIDEO  
L
-
AUDIO  
-
R
L
K
E
REW F.FWD  
D
REC/OTR  
1
2
VCR/TV  
SLOW  
2
1
4
7
2
5
8
0
3
6
9
0
VCR  
+1 0  
DVD  
or  
SKIP/CH.  
DISPLAY  
PAUSE  
PLAY  
• Select the chan-  
nel to record.  
STOP  
Accidental erasure prevention  
To prevent accidental recording on a  
recorded cassette, remove its record tab.  
To record on it later, cover the hole with  
adhesive tape.  
with tab  
5
4
REC/OTR  
MENU  
Tape Speed  
Recording/Playback Time  
ENTER  
3
Type of tape  
SP mode  
T60  
1hour  
3hour  
T120  
2hours  
6hour  
T160  
2-2/3hours  
8hour  
SPEED  
SETUP TOP MENU  
RETURN  
SLP mode  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
ZOOM  
Record tab  
• Select the desired  
tape speed.  
SP  
You CANNOT copy a DVD to a videotape.  
REC/OTR  
4
To stop recording temporarily (Pause mode)  
REC  
Press [PAUSE k].  
• During the rec-pause mode, five  
represents one minute.  
C
marks appear on the TV screen. Each  
C
mark  
Press [REC/OTR] repeatedly to select the  
desired recording length.  
• Press it again to resume recording.  
REC  
OTR(0:30)  
OTR(1:00).....  
(Normal recording)  
• Pause mode will be automatically canceled after 5 minutes to prevent damage to  
the tape and the video head.  
OTR(8:00)  
OTR(7:30)  
Hint  
5
6
OPEN/CLOSE  
/EJECT  
STOP  
• If you want to watch one channel while recording another...  
1) Press [VCR/TV] to put the unit in TV position.  
2) Select a channel you want to watch with the cable box or the satellite box.  
Timer Recording  
•Insert a tape with its record tab  
2
3
4
Select the desired month.  
PROGRAM NUMBER  
DATE – – / – –  
START TIME – – : – – – –  
END TIME – – : – – – –  
1
into the unit.  
ONE TIME PROGRAM  
or  
VCR  
PROGRAM NUMBER  
1
DATE 1 0 / 2 3 MON  
START TIME – – : – – – –  
END TIME – – : – – – –  
VCR  
or  
CHANNEL  
– –  
REC SPEED – –  
- M E N U -  
1
CHANNEL  
– –  
Select an empty program number.  
REC SPEED – –  
B TIMER PROGRAMMING  
MENU  
AUTO REPEAT [OFF]  
CHANNEL SET UP  
CLOCK SET  
LANGUAGE SELECT  
AUDIO OUT  
TV STEREO  
SAP  
Select the desired day.  
[ON]  
You can program one  
year in advance.  
or  
PROGRAM NUMBER  
1
B ONCE  
DAILY  
TIMER PROGRAMMING  
or  
WEEKLY  
PROG  
12345678  
DATE  
Select “ONCE”, “DAILY”  
(Mon-Fri), or “WEEKLY”.  
START TIME  
Available program num-  
ber flashes.  
EN  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ONE TIME PROGRAM  
PROGRAM NUMBER  
The VCR/DVD will change to  
the DVD mode. Turn off the  
unit when you do not use the  
DVD functions. When you turn  
5
Select the desired start time  
8
10  
SUBTITLE  
T-SET  
1
(hour).  
DATE  
1 0 / 2 3 MON  
START TIME 0 7 : 3 0 PM  
END TIME 0 8 : 3 0 PM  
ONE TIME PROGRAM  
or  
PROGRAM NUMBER  
1
CHANNEL  
1 6  
off the VCR/DVD,  
will  
DATE 1 0 / 2 3 MON  
START TIME 0 7 : 3 0 – –  
END TIME – – : – – – –  
REC SPEED – –  
or  
appear in the front panel dis-  
play. In some occasions, how-  
ever, the VCR/DVD may be  
automatically turned off,  
instead of changing to the  
DVD mode after pressing  
[SUBTITLE/T-SET].  
CHANNEL  
– –  
Select the desired channel.  
REC SPEED – –  
If you have connected the unit to a  
cable box or satellite box as the  
Connection on page 6, select the VCR  
to channel 3 or 4 (the RF output chan-  
nel of the VCR). Then, select the  
desired channel at the cable box or  
satellite box. Leave the cable box or  
satellite box on for timer recording.  
Select the minute.  
To use the VCR after Timer  
Recording finishes normally,  
or  
press [SUBTITLE/T-SET]  
.
Hint  
To go back one step, press [s] (during  
steps 3) to 9) ).  
To Check, Correct or Cancel a  
Timer Program  
1) Press [SUBTITLE/T-SET] then,  
[VCR] on the remote control.  
2) Select main menu by pressing [MENU].  
3) Select TIMER PROGRAMMING”  
by pressing [K/L]. Then, press [B].  
4) Select the program number which you  
want to check by pressing [K/L]. The  
details of the program you selected  
will appear on the TV screen.  
ONE TIME PROGRAM  
9
PROGRAM NUMBER  
DATE  
1
ONE TIME PROGRAM  
PROGRAM NUMBER  
1 0 / 2 3 MON  
6
7
START TIME 0 7 : 3 0 PM  
END TIME 0 8 : 3 0 PM  
1
or  
DATE  
1 0 / 2 3 MON  
CHANNEL  
1 6  
START TIME 0 7 : 3 0 PM  
END TIME – – : – – – –  
REC SPEED SP  
BSP  
SLP  
or  
CHANNEL  
– –  
REC SPEED – –  
AM  
B PM  
Select the desired recording speed.  
To set another program after step 9),  
press [B]. Then, continue with step 2).  
Select “AM” or “PM”.  
• Go to the digit you want to change  
by pressing [s/B]. Then, enter cor-  
rect numbers by pressing [K/L].  
You may cancel the entire program  
by pressing [s] while the program  
number flashes.  
5) Press [CLEAR/C.RESET] to exit.  
6) Press [SUBTITLE/T-SET] to return  
to timer stand-by mode.  
CLEAR/  
C. RESET  
Repeat the procedure in steps  
5) and 6) to set the end time.  
To cancel a Timer Recording  
in progress  
Press [STOP/EJECT C/A] on the unit.  
Hints for OTR and Timer Recording  
Press  
[VCR] on the remote control before you set Timer Recording. Make sure the remote control is in the VCR mode, then press  
[SUBTITLE/T-SET].  
• If a tape is not in the unit or does not have the record tab, the  
light flashes and Timer Recording cannot be performed. Please insert a  
recordable tape.  
• When Timer Recordings are set, the  
so that the light disappears. Press  
features as described in this manual.  
light will appear. To use the VCR as usual until the time for the recording, press  
VCR/TV] to choose the VCR position. Select either VCR or DVD mode, then continue with the other  
[SUBTITLE/T-SET]  
[
After an OTR and a Timer Recording has been set, this unit operates as follows:  
• If a tape runs out before an OTR or a Timer Recording is finished, the unit ejects the tape. Press  
[
SUBTITLE/T-SET] on the remote control or  
OUTPUT] on the front  
[STOP/EJECT] on the unit, then press [VCR] to  
[
STOP/EJECT] on the unit, then press [VCR] to activate the VCR function again.  
• Once the unit turns to the timer standby mode, no VCR functions are available until  
panel and VCR] on the remote control will not function.)  
[
SUBTITLE/T-SET] is pressed. ([  
[
To cancel the timer standby mode, press  
[SUBTITLE/T-SET] on the remote control or  
activate the VCR function again.  
• The mode of the unit and the remote control may differ (VCR mode or DVD mode) when you set Timer Recording or after you canceled Timer  
Recording. Press [VCR] or [DVD] on the remote control to select your desired mode before you operate.  
• Once the unit switches to the DVD mode, all the VCR function will be unavailable. “ ” will not appear as long as the DVD is in use. All the  
DVD functions are available during OTR, timer standby mode and Timer Recording.  
When an OTR or a Timer Recording is completed...  
• If Auto Power Off for DVD has been activated and there are Timer Recordings on standby, the unit turns off automatically, and the  
light  
appears to indicate the unit is in the timer standby mode.  
• The  
light flashes if there are no more Timer Recordings on standby.  
• If Auto Power Off for DVD has NOT been activated, the unit switches to the DVD mode and all the VCR function will be unavailable. The  
light will not appear as long as the DVD is in use. All the DVD functions are available during OTR, timer standby mode and Timer Recording.  
• Press  
Press [OUTPUT] on the front panel or [VCR] on the remote control to use the VCR when the unit is on. In case Timer Recording is in standby  
mode, press STOP/EJECT C/A] on the front panel or SUBTITLE/T-SET] on the remote control, and then press [OUTPUT] on the front panel  
or [VCR] on the remote control.  
If you want to use the DVD function during a timer recording or while the  
• Press POWER] to turn on the VCR/DVD. Press DVD] on the remote control to choose DVD mode, then continue with the other DVD features  
[STOP/EJECT C/A] on the front panel or  
[SUBTITLE/T-SET] on the remote control to use the VCR when the unit is off.  
[
[
light is on or blinking.  
[
[
as described in this manual.  
Note (for Timer Recording) :  
• If there is a power failure or the unit is unplugged for more than 30 seconds, clock and all timer settings will be lost.  
EN  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copying a Video Tape  
Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.  
(Back of another source)  
(Back of TV)  
(Back of Recording DVD/VCR*)  
1
AUDIO OUT  
Connect  
L
DVD/VCR  
AUDIO OUT  
VCR  
AUDIO IN  
2
I
or  
ANT-IN  
L
L
Connect  
R
R
R
VIDEO OUT  
VIDEO OUT  
VIDEO IN  
ANT-OUT  
RF cable  
(supplied)  
*Front input jacks are also available  
Audio/Video cables  
(commercially available)  
1) Insert a pre-recorded tape into the playing VCR.  
2) Insert a tape with its record tab into the recording unit.  
3) Press [SPEED] on the remote control of the recording unit to select the desired recording speed (SP/SLP).  
4) Select the “L1”or “L2” position on the recording unit.  
To use the input jacks on the back of this unit, select “L1” position by pressing [0], [0], [1] on the remote control or  
[CHANNEL K/L].  
To use the input jacks on the front of this unit, select “L2” position by pressing [0], [0], [2] on the remote control or  
[CHANNEL K/L].  
5) Press [REC/OTR] on the recording unit.  
6) Begin playback of the tape in another source.  
7) To stop recording, press [STOP/EJECT C/AA] on the recording unit, then stop playback of the tape in another source.  
Hint  
• For best results during dubbing, use the front panel controls whenever possible. The remote control might affect another source’s operation.  
• Always use video-quality shielded cables with RCA-type connectors. Standard Audio cables are not recommended.  
You can use a video disc player, satellite receiver or other Audio/Video component with Audio/Video outputs.  
• “L1” or “L2” is found before the lowest memorized channel. (Example: CH02)  
• “L2” input jacks are on the front of this unit.  
MTS System (Multi-Channel Television Sound)  
When You Receive or Record a Program Broadcast in MTS  
When you receive a broadcast on the  
VCR, you can check the type of the  
broadcast by pressing [DISPLAY].  
When “TV STEREO” or “SAP” selec-  
tion is valid, select them by following  
the steps below. This selection is  
needed when you record the program.  
SAP means Second Audio Program  
(usually second language).  
VCR  
2
To exit the menu  
VCR  
CLEAR/  
C. RESET  
1
MENU  
- M E N U -  
TIMER PROGRAMMING  
AUTO REPEAT [OFF]  
CHANNEL SET UP  
CLOCK SET  
LANGUAGE SELECT  
AUDIO OUT  
B TV STEREO  
[ON]  
SAP  
or  
Select “TV STEREO”  
or “SAP”.  
Display on the  
TV screen  
Type of  
TV STEREO/SAP  
Selection  
broadcast  
Regular  
(monaural audio)  
-None-  
-Invalid-  
-Invalid-  
Stereo  
broadcast  
STEREO  
TV STEREO  
(main audio program)  
Bilingual  
broadcast  
SAP  
SAP  
(second audio program)  
TV STEREO  
(stereo main audio program)  
Stereo &  
Bilingual  
broadcast  
STEREO  
SAP  
SAP  
(second audio program)  
When You Play Back a Tape Recorded in Hi-Fi Stereo  
VCR  
• If you have connected a stereo  
TV to this unit, select “HIFI”.  
• If you have connected a monaur-  
al TV to this unit, select “MONO”.  
2
3
AUDIO OUT  
[ON]  
VCR  
B HIFI  
MENU  
- M E N U -  
1
MONO  
TIMER PROGRAMMING  
AUTO REPEAT [OFF]  
CHANNEL SET UP  
CLOCK SET  
or  
Your Selection  
HIFI  
MONO  
Monaural  
L+R  
LANGUAGE SELECT  
B AUDIO OUT  
L-channel  
R-channel  
Type of recorded tape  
non Hi-Fi tapes  
Monaural  
Monaural  
Select “HIFI” or “MONO”.  
TV STEREO  
SAP  
[ON]  
Hi-Fi tapes  
recorded in  
Hi-Fi stereo  
or  
L
R
To exit the menu  
Hi-Fi tapes  
recorded main  
audio program  
CLEAR/  
C. RESET  
Main audio  
program  
Main audio  
program  
Main audio  
program  
Hi-Fi tapes  
recorded second  
audio program  
Second audio Second audio Second audio  
program program program  
EN  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD Functions  
Operations described after this section are mainly based on the remote control use. Some operations can be carried out on main unit.  
Playback  
Before: Turn on the TV, amplifier and any other components which are connected to this unit. Make sure the TV and audio  
receiver (commercially available) are set to the correct channel.  
1
1
2
4 3  
DVD  
DVD-V  
CD  
OPEN/CLOSE  
POWER  
A
OPEN/CLOSE  
/EJECT  
POWER  
SPEED  
AUDIO  
STOP/EJECT  
PLAY  
STOP  
PLAY  
P
/
A
O
P
O
CHANNEL  
VCR OUTPUT DVD  
1
1
VIDEO  
L
-
AUDIO  
-
R
L
K
E
REW F.FWD  
D
REC/OTR  
1
2
1
4
7
2
5
8
3
6
9
SKIP/CH.  
OPEN/CLOSE  
/EJECT  
POWER  
VCR/TV  
SLOW  
0
VCR  
+1 0  
DVD  
Hint  
DISPLAY  
PAUSE  
Insert a disc with  
label facing up.  
• A “prohibited icon” may appear at the top-right on the TV screen  
when the operation is prohibited by the disc or this unit.  
• Some DVDs may be played from title 2 or 3 due to specific pro-  
grams.  
During the playback of a two-layered disc, pictures may stop for a  
moment. This happens while the 1st layer is being switched to the 2nd  
layer. This is not a malfunction.  
3
4
PLAY  
STOP  
REC/OTR  
MENU  
3
4
To start  
To stop  
ENTER  
playback  
playback  
STOP  
PLAY  
TIP:  
You can change the on-screen language for DVD function in  
“PLAYER MENU” setting. (Refer to page 20.)  
DVD menu  
Fast Forward/Reverse Search  
DVD  
Some discs contain menus which allow you to customize  
DVD playback. Press [K / L / s / B] to select an item, then  
press [ENTER] (or [PLAY B]).  
DVD-V  
CD  
Press [h] or [gg] repeatedly during playback  
to select the required forward or reverse speed.  
To continue playback, press [PLAY B].  
E
1
Calling up a Menu Screen during Playback  
Press [MENU] to call up the DVD menu.  
Press [TOP MENU] to call up the title menu.  
Hint  
For DVDs, fast forward or reverse search speed is different depending  
on the disc. Approximate speed is 1(x2), 2(x8), 3(x20), 4(x50), 5(x100)  
.
• For Audio CDs, approximate speed is 1(x2), 2(x8), 3(x30).  
Hint  
• Menu operations may vary depending on the disc. Refer to the  
manual accompanying the disc for details.  
Slow Forward/Slow Reverse  
DVD  
DVD-V  
Resume  
Press [h] or [g] repeatedly during the pause  
mode to select the required forward or reverse speed.  
To continue playback, press [PLAY B].  
1
DVD  
DVD-V  
CD  
Press [STOP C] during playback.  
Resume message will appear on  
the TV screen.  
Hint  
Resume ON  
• Slow forward or reverse speed is different depending on the disc.  
Approximate speed is 1(1/16), 2(1/8), 3(1/2).  
Press 'PLAY' to play from here.  
To play the beginning,  
press 'STOP' first and then 'PLAY'.  
Press [PLAY B], playback will  
resume from the point at which  
playback was stopped.  
• Set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in  
the slow playback mode are blurred. (Refer to pages 20-21.)  
Zoom  
DVD  
DVD-V  
Hint  
1) Press [ZOOM] during playback.  
2) Press [ZOOM] repeatedly to select the required zoom  
factor: x2, x4 or OFF.  
To cancel resume, press [STOP C] one more time during the Stop  
mode.  
• The resume information stays on even when the power is turned off.  
x2  
x4  
Paused and Step-by-Step Playback  
DVD  
3) Press [K / L / s / B] to slide the zoomed picture across  
the screen.  
DVD-V  
CD  
Press [PAUSE k] during playback.  
To continue playback, press [PLAY B].  
4) To exit zoom mode, press [ZOOM] to select OFF.  
Hint  
• Zooming function does not work while the disc menu is showing up.  
• x4 zoom is not available on some discs.  
DVD-V  
• The picture may be distorted when you press [PAUSE F], [D] or  
[E] repeatedly in the zoom mode.  
The disc goes forward by one frame each time [PAUSE k] is  
pressed during the pause mode.  
To continue playback, press [PLAY B].  
• In the zoom mode, it automatically changes  
zoomed position guide.  
x2(x4) to the  
Hint  
• On DVDs, set “STILL MODE” to “FIELD” in the DISPLAY menu if pictures in the  
pause mode are blurred. (Refer to pages 20-21.)  
EN  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-Screen Display  
You can check the information about the current disc by pressing [DISPLAY] on the remote control.  
DVD  
DVD  
CD  
DVD-V  
DISPLAY  
Angle icon appears only when avail-  
able on the DVD  
Current playback status  
DISPLAY  
4/12 0:03:21 - 0:02:15  
T
1
Current playback status  
Remaining time of the current track  
Elapsed time of the current track  
TR(Track):  
Current track number / Total tracks  
11/16 0:00:00 - 0:03:30  
1
Remaining time of the current chapter  
Elapsed time of the current chapter  
DISPLAY  
ALL:  
CH(Chapter):  
Current chapter number / Total chapters  
Current track number / Total tracks  
4/12 0:13:45 - 0:45:40  
T
2
DISPLAY  
Current repeat setting appears only  
when the repeat setting is active  
T: Track repeat  
A: All Tracks repeat  
1/3 0:00:00 - 1:23:45  
2
3
A
B: A-B repeat  
Remaining time of the current title  
Elapsed time of the current title  
Remaining time of the entire disc  
Elapsed time of the entire disc  
DISPLAY  
TT(Title):  
Current title number / Total titles  
3
DISPLAY  
Hint  
T
L1  
• When you are playing a disc in PROGRAM or RANDOM mode,  
2
Layer numbers, appears only when  
playing a two-layered disc  
L0: Layer 0 is playing  
PROGRAM (or RANDOM) will be displayed instead of  
.
L1: Layer 1 is playing  
Current repeat setting appears only  
when the repeat setting is active  
C: Chapter repeat / T: Title repeat /  
A
B: A-B repeat  
BIT RATE: The amount of audio and  
video data currently being read  
DISPLAY  
4
EN  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Search Function  
Track Search  
Title / Chapter Search  
Time Search  
DVD  
DVD  
DVD  
CD  
DVD-V  
DVD-V  
CD  
Using [SEARCH MODE]  
Using [SEARCH MODE]  
1
PLAY  
TOTAL 1:29:00  
1
1
SEARCH  
MODE  
PLAY  
/12  
/29  
SEARCH  
MODE  
Press repeatedly until  
the Time Search dis-  
play appears.  
Press once for the  
SEARCH  
MODE  
Chapter Search.  
Press twice for the  
Title Search.  
2
1
4
7
2
5
8
0
3
6
/29  
2
1
4
7
2
5
8
0
3
6
9
9
TOTAL 1:29:00  
+1 0  
2
1
4
7
2
5
8
0
3
6
within 30 seconds  
/12  
within 30 seconds  
9
• For the disc with less than 10 tracks,  
press the track number directly.  
For discs with more than 10 but less than 99  
tracks, to play a single-digit track, press [0]  
first, then the track number (e.g. for track 3,  
press [0], [3]). To play a double-digit track,  
press the track number.  
+1 0  
within 30 seconds  
Hint  
• When there is no need to enter a number,  
“0” appears automatically.  
G K H L  
Using [SKIP/CH.  
1
/
/
]
L
G K  
For example, “0: 0_: __” appears in the  
Time Search display if the total time of the  
title or track is less than 10 minutes.  
Current Chapter  
(CH)  
G K H L  
Using [SKIP/CH.  
/
/
]
G K  
L
• Press [CLEAR/C.RESET] to erase the  
PLAY  
CH 1 CH 2 CH 3 CH 4  
incorrect input at step 2).  
1
SKIP  
SKIP  
PLAY  
or  
Current Title  
(TT)  
Current Track  
(TR)  
SKIP/CH.  
TT 1 TT2 TT3 TT4  
TR 1 TR 2 TR 3 TR 4  
SKIP/CH.  
SKIP  
SKIP  
SKIP  
SKIP  
(If the disc has no chapters)  
Hint  
Hint  
[+10] button can also bring the Track  
Search display, except for the disc with  
less than 10 tracks. For such a disc, track  
search can be done by just pressing the  
track number.  
• Depending on the disc being played, this  
function can also be performed by directly  
entering the desired chapter number with  
the Number buttons. Refer to the manual  
accompanying the disc.  
• For Audio CDs, Track Search is not avail-  
able for Programmed or Random Playback.  
Marker Setup  
DVD  
To return to the marker  
later  
To exit the marker screen  
DVD-V  
CD  
1
This feature allows you to assign a specific  
point on a disc to be called back later.  
To set a marker  
RETURN  
1
PLAY  
1
PLAY  
SEARCH  
MODE  
Press repeatedly until  
Hint  
this marker display  
• The Marker display will disappear in about  
30 seconds when there is no output.  
To clear a marker, select the marker to be  
cleared at step 2) in the section “To set a  
marker” or “To return to the marker later”  
and then press [CLEAR/C.RESET].  
• Opening the disc tray or turning off the  
power will erase all markers.  
• Selecting “AC” at step 2) in the section “To  
set a marker” or “To return to the marker  
later” will also erase all markers.  
appears.  
SEARCH  
Press repeatedly until  
this marker display  
appears.  
MODE  
2
or  
2
or  
3
ENTER  
3
ENTER  
at the desired marker  
• Playback will restart from the specific  
point which you set.  
EN  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat / Random / Programmed Playback  
Repeat Playback  
Repeat A-B Playback  
Programmed Playback  
DVD  
DVD  
DVD  
DVD-V  
CD  
CD  
DVD-V  
CD  
You may determine the order in which  
tracks will play.  
1
Repeat function is available only during  
playback.  
PLAY  
A-  
1
STOP  
1
A-B  
PLAY  
TOTAL 0:00:00  
At your desired starting point (A)  
MODE  
1/4  
REPEAT  
2
A-B  
A-B  
Press once.  
Each time you press [REPEAT], repeat  
function changes as example below.  
2
TOTAL  
At your desired end point (B)  
1
5
3:30  
5:10  
10 4:20  
11 3:00  
12 3:20  
17 4:10  
22 2:50  
2/3  
DVD-V  
or  
Point B should be in the same title  
or track as point A.  
(repeat off)  
1/4  
OFF  
Hint  
(current chapter repeat)  
CHAPTER  
TITLE  
• Up to 99 tracks can be  
ordered.  
• If eight or more tracks  
were in a program, use  
[SKIP/CH. G/KK H/L]  
to see all the tracks.  
To exit the sequence, press [A-B] so that  
ENTER  
OFF appears.  
(current title repeat)  
To cancel Point A, press [CLEAR/C.RESET].  
• This function does not work in the other  
repeat modes.  
CD  
(repeat off)  
OFF  
3
(current track repeat)  
(entire disc repeat)  
Random Playback  
TRACK  
ALL  
PLAY  
This function shuffles the playing  
order of tracks instead of playback  
in the sequence.  
DVD  
Hint  
Hint  
CD  
• Press [CLEAR/C.RESET] at step 2) to  
erase the most recently entered track.  
To erase all programmed tracks at once,  
select “ALL CLEAR’’ and press [ENTER] at  
step 2).  
• Repeat setting (except ALL) will be cleared  
when moving to another title, chapter or  
track.  
1
STOP  
RANDOM  
CD-DA  
TOTAL 0:45:55  
• Repeat playback are not available with all  
discs or during repeat A-B playback.  
RANDOM PROGRAM  
--no indication--  
• While a program is being played back,  
[STOP C] works as follows;  
MODE  
PLAY  
Press [STOP CC] and [PLAY B] next, so  
that the programmed playback restarts.  
Press twice.  
Press [STOP C] twice and [PLAY BB]  
next, so that playback restarts from the  
first track in the original order. However,  
your programmed playback can be  
restarted when you follow above steps.  
(Your programs are still stored until  
either the disc tray is open or power is  
turned off.)  
2
PLAY  
Hint  
To repeat the current track in the program,  
press [REPEAT] repeatedly until  
TRACK’’ appears during playback.  
To repeat the entire program, press  
To repeat the current track in the random  
selections, press [REPEAT] repeatedly  
until “  
TRACK” appears during playback.  
To repeat the entire random selections,  
press [REPEAT] repeatedly until “  
appears during playback.  
[REPEAT] repeatedly until “  
ALL’  
ALL”  
appears during playback.  
• During Random Playback, you cannot go  
back to the previous track.  
EN  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special Settings  
2
3
Subtitle Language  
Audio Language  
OFF  
ENTER  
DVD  
DVD  
DVD-V  
DVD-V  
ON: Makes the dark areas brighter.  
OFF: Shows the original picture as recorded.  
This unit allows you to select a subtitle  
language (if available) during DVD play- language (if multiple languages are  
back.  
This unit allows you to select an audio  
RETURN  
available) during DVD playback.  
1
1
PLAY  
PLAY  
1.ENG Dolby D 3/2.1ch 48k/3  
1.ENG/6  
Stereo Sound Mode  
AUDIO  
SUBTITLE  
T-SET  
DVD  
CD  
This unit allows you to select a sound  
mode during CD playback.  
Each time you press [AUDIO], audio  
language changes as example below.  
Each time you press [SUBTITLE/T-SET],  
subtitle language changes as example  
below.  
(English audio)  
(Spanish audio)  
(French audio)  
ENG  
SPA  
FRE  
1
PLAY  
(no subtitles)  
OFF  
ENG  
FRE  
STEREO  
(English subtitles)  
(French subtitles)  
AUDIO  
Each time you press [AUDIO], sound  
Hint  
mode changes as example below.  
Some discs will only allow you to change the  
audio setting from the disc menu. Refer to the  
manual accompanying the discs for details.  
(right and left channels  
are active)  
STEREO  
L-ch  
To set subtitle ON/OFF  
1
• When “OFF” appears on the TV screen, it  
means audio language is not available.  
(left channel is active)  
PLAY  
If your language is not shown after pressing  
[AUDIO] several times, the disc may not have  
that language. However, some discs allow  
audio language setting on the disc menu.  
(Operation varies depending on the disc, so  
refer to the manual along with the disc.)  
1.ENG/6  
(right channel is active)  
R-ch  
SUBTITLE  
T-SET  
Virtual Surround  
DVD  
2
Camera Angle  
DVD-V  
CD  
OFF  
DVD  
You can enjoy stereophonic virtual world  
on your existing 2 channel stereo system.  
DVD-V  
Some DVD discs may con-  
tain scenes which have  
been shot simultaneously  
1
Hint  
PLAY  
OFF  
• If your language is not shown after press-  
ing [AUDIO] or [SUBTITLE/T-SET] several  
times, the disc may not have that lan-  
guage. However, some discs allow audio  
language or subtitle language setting on  
the disc menu. (Operation varies depend-  
ing on the discs, so refer to the manual  
along with the disc.)  
from various angles. You can change  
the camera angle if the  
icon  
MODE  
appears on the screen. If the “ANGLE  
ICON” setting is “OFF” in the OTHERS  
menu, the  
icon will not appear.  
Press twice (once for CD ).  
(Refer to pages 20 and 22.)  
2
• When “NOT AVAILABLE” appears on the  
TV screen, it means no subtitle is recorded  
on the scene.  
1
ENTER  
1
1 / 8  
PLAY  
• If you choose a language that has three-  
letter-language code, the code will be dis-  
played every time you change the subtitle  
language setting. If you choose any other  
languages, ‘---’ will be displayed instead.  
(Refer to page 24.)  
• Some discs will only allow you to change  
the subtitle from the disc menu. Refer to  
the manual accompanying the discs for  
details.  
ANGLE  
1: Natural effect  
2: Emphasized effect  
OFF: No effects (original sound)  
Black Level Setting  
3
RETURN  
DVD  
DVD-V  
Adjust the Black Level Setting to make  
the dark areas of the TV picture brighter.  
Hint  
For CD play back only  
• Virtual Surround will not be effective if the  
sound mode is set to something other than  
STEREO. Refer to “Stereo Sound mode”.  
1
PLAY  
ON  
When playing back 96kHz with Virtual  
Surround function, the sound will be down  
sampling at 48kHz and output as digital audio.  
MODE  
EN  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
DVD Setup  
QUICK SETUP Menu  
You can select the “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE” or “DOLBY DIGITALfrom the  
QUICK SETUP menu quickly.  
1
2
SETUP  
STOP  
or  
Select the desired item.  
<SETUP MENU>  
Confirm that “QUICK” is selected.  
ENTER  
SETUP  
QUICK  
A
B
B
C
P20  
P21  
P21  
P21  
Step 5)  
Step 5)  
Step 5)  
Step 5)  
SETUP  
PLAYER MENU  
TV ASPECT  
PROGRESSIVE  
DOLBY DIGITAL  
ENGLISH  
4:3 LETTER BOX  
OFF  
QUICK  
CUSTOM  
INITIALIZE  
BITSTREAM  
ENTER  
Refer to “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE”  
or “DOLBY DIGITALon pages 20-21.  
CUSTOM Menu  
You can change the settings of the unit.  
QUICK  
on pages 20-21 indicates DVD Setup menus also accessible from the QUICK SETUP menu.  
SETUP  
ENTER  
1
2
3
STOP  
or  
or  
<SETUP MENU>  
Select “CUSTOM”.  
Select the desired item.  
ENTER  
SETUP  
SETUP  
SETUP  
CUSTOM  
LANGUAGE  
DISPLAY  
AUDIO  
PARENTAL  
OTHERS  
QUICK  
CUSTOM  
INITIALIZE  
QUICK  
CUSTOM  
INITIALIZE  
LANGUAGE menu  
DISPLAY menu  
AUDIO menu  
PARENTAL menu  
OTHERS menu  
SETUP  
LANGUAGE  
SETUP  
AUDIO  
SETUP  
PARENTAL  
SETUP  
OTHERS  
SETUP  
DISPLAY  
PASSWORD  
AUDIO  
ORIGINAL  
OFF  
ENGLISH  
ENGLISH  
DRC  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
ON  
ANGLE ICON  
AUTO POWER OFF ON  
ON  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
4:3 LETTER BOX  
AUTO  
OFF  
Please enter a 4-digit password.  
SUBTITLE  
DISC MENU  
PLAYER MENU  
page 20  
page 21  
page 21  
page 22  
page 22  
A
B
C
D
E
LANGUAGE Setting  
A
Follow steps 1) to 3) in the “CUSTOM Menu” section on above.  
Select the desired language.  
Select the desired item.  
4
5
6
To exit the menu  
ENTER  
ENTER  
SETUP  
or  
or  
AUDIO: 1 2  
(Default: ORIGINAL)  
Sets the audio language.  
AUDIO  
Hint  
1  
ORIGINAL  
ENGLISH  
FRENCH  
• Language options are not available  
LANGUAGE menu  
with some discs.  
SUBTITLE: 1 2  
(Default: OFF)  
Sets the subtitle language.  
SUBTITLE  
OFF  
ENGLISH  
FRENCH  
• If OTHER is selected on the AUDIO,  
SUBTITLE or DISC MENU screen,  
press four-digit number to enter the  
code for the desired language. (Refer  
to the language code list on page 24.)  
• Only the languages supported by the  
disc can be selected.  
SETUP  
LANGUAGE  
AUDIO  
ORIGINAL  
SUBTITLE  
DISC MENU  
PLAYER MENU  
OFF  
ENGLISH  
ENGLISH  
DISC MENU: 1  
(Default: ENGLISH)  
Sets the language for  
DVD menu.  
DISC MENU  
ENGLISH  
FRENCH  
SPANISH  
2  
Language Setting for Audio and Subtitle  
are not available with some discs. Then  
use [AUDIO] and [SUBTITLE/T-SET].  
Details are on page 19.  
PLAYER MENU  
ENGLISH  
FRANÇAIS  
ESPAÑOL  
QUICK  
PLAYER MENU:  
(Default: ENGLISH)  
Sets the language for  
the On-screen display.  
EN  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISPLAY Setting  
B
You can change the display functions. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 20.  
4
5
Select the desired item.  
6
To exit the menu  
QUICK  
TV ASPECT:  
Select the  
desired  
setting.  
SETUP  
(Default: 4:3 LETTER BOX)  
See Hint on the right.  
or  
TV ASPECT  
ENTER  
TV ASPECT  
STILL MODE  
4:3 LETTERBOX  
AUTO  
PROGRESSIVE OFF  
4:3 LETTER BOX  
4:3 PAN & SCAN  
16:9 WIDE  
or  
Hint  
TV ASPECT:  
DISPLAY menu  
Select “4:3 LETTER BOX”, so  
that black bars may appear on  
the top and bottom of the screen.  
ENTER  
SETUP  
DISPLAY  
STILL MODE:  
(Default: AUTO)  
See Hint on the right.  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
4:3 LETTER BOX  
AUTO  
OFF  
Select the  
desired  
setting.  
STILL MODE  
ENTER  
TV ASPECT  
STILL MODE  
4:3 LETTERBOX  
AUTO  
AUTO  
FIELD  
FRAME  
or  
PROGRESSIVE OFF  
ENTER  
• If you select “FIELD”, the  
picture in the still mode will  
be stabilized.  
If you select “FRAME”, the  
picture in the still mode will  
be highly defined.  
• An individual picture on TV  
screen is called as “frame”,  
which consists of two sepa-  
rate images called as “field”.  
5
QUICK  
PROGRESSIVE:  
(Default: OFF)  
If “PROGRESSIVE” is “ON”,  
this message appears:  
Select  
“YES”.  
See Hint on the right.  
Before proceeding…  
1. Make sure your TV has progressive scan.  
2. Connect with component video cable  
4:3 LETTERBOX  
AUTO  
ON  
TV ASPECT  
STILL MODE  
4:3 LETTERBOX  
AUTO  
SETUP  
NOTE: If there is no picture or picture is  
distorted after selecting “YES”,  
wait about 15 seconds for auto recovery.  
or  
PROGRESSIVE OFF  
Activate Progressive?  
NO  
YES  
SELECT:  
K
/
L
SET:ENTER  
ENTER  
Some pictures may be blurred  
at the “AUTO” setting in the  
still mode due to their data  
characteristics.  
If there is no picture or you do not  
press any buttons for 15 seconds,  
Progressive Scan will switch to “OFF”.  
PROGRESSIVE:  
You can set “PROGRESSIVE” to  
“OFF” either in the DISPLAY  
menu or by pressing and hold-  
ing [PLAY B] on the front of the  
unit for more than 5 seconds.  
When “PROGRESSIVE” is “ON”,  
video signals from VIDEO OUT  
and S-VIDEO OUT jacks will be  
distorted or not be output at all.  
6 To complete the  
PROGRESSIVE  
setting  
Select  
“YES”.  
Confirm again to use progressive scan.  
If Picture is good, Select “YES”.  
ENTER  
or  
NO  
YES  
ENTER  
SET:ENTER  
SELECT:  
K
/
L
AUDIO Setting  
C
Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow steps  
1) to 3) in the “CUSTOM Menu” section on page 20.  
5
DRC (Dynamic Range Control):  
(Default: ON)  
4
6
To exit the menu  
Select the desired item.  
SETUP  
Set to “ON” to compress the range between soft and loud sounds.  
DRC  
ON  
OFF  
or  
DOWN SAMPLING ON  
ON  
BITSTREAM  
ENTER  
DOLBY DIGITAL  
BITSTREAM  
DOWN SAMPLING:  
(Default: ON)  
Set to “ON” when outputting in 48kHz.  
Hint  
DRC:  
AUDIO menu  
SETUP  
AUDIO  
• This function is available  
only on the discs which  
are recorded in the Dolby  
Digital format.  
Set to “OFF” when outputting the original sound.  
DRC  
ON  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
DRC  
ON  
ON  
DOWN SAMPLING ON  
OFF  
DOWN SAMPLING:  
DOLBY DIGITAL  
BITSTREAM  
BITSTREAM  
ENTER  
• When playing disc with  
copyright Protection, the  
sound will be down sam-  
pled at 48kHz, even if  
you set to “OFF”.  
QUICK  
DOLBY DIGITAL:  
(Default: BITSTREAM)  
This function is avail-  
able only on digital out-  
putting of a disc  
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.  
• BITSTREAM: Outputs a Dolby Digital Signals.  
• PCM: Convert the Dolby Digital into PCM (2 channel).  
recorded in 96kHz.  
DRC  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
ON  
ON  
ON  
PCM  
ENTER  
EN  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARENTAL Setting  
D
Parental Control limits the disc viewing that exceed your settings. (An incorrect password will not be accepted.)  
This feature prevents your children from viewing inappropriate materials.  
Parental Levels  
Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.  
Follow steps 1) to 3) in the “CUSTOM Menu” section on page 20.  
To exit  
the menu  
4
Enter your desired four-  
digit password (except  
for 4737).  
5
6
Select “PARENTAL  
LEVEL.  
Select the  
desired level.  
7
SETUP  
1
4
7
2
5
8
0
3
6
9
or  
or  
ENTER  
ENTER  
ENTER  
PARENTAL LEVEL  
ALL  
PARENTAL LEVEL  
PASSWORD CHANGE  
ALL  
8 [ADULT]  
7 [NC-17]  
6 [R]  
PARENTAL menu  
CONTROL LEVELS  
SETUP  
PARENTAL  
• ALL:  
All parental locks are canceled.  
DVD softwares of any grades (adult/general/children) can be played back.  
PASSWORD  
• Level 8:  
Please enter a 4-digit password.  
• Levels 7 to 2: Only DVD softwares intended for general use and children can be played  
back.  
• Level 1:  
Only DVD softwares intended for children can be played back, with those  
intended for adult and general use prohibited.  
TIPS FOR LEVELS  
or  
• 8 [ADULT]:  
• 7 [NC-17]:  
• 6 [R]:  
DVD softwares of any grades (adult/general/children) can be played back.  
If you have set a password  
No one under 17 admitted  
already, enter the current  
four-digit password.  
Restricted; under 17 requires accompanying parent or adult guardian  
Parental Guidance Recommended  
Unsuitable for children under 13  
Parental Guidance suggested  
• 5 [PGR]:  
• 4 [PG13]:  
• 3 [PG]:  
SETUP  
PARENTAL  
PASSWORD  
Enter current password.  
• 2 [G]:  
General Audience  
• 1 [KID SAFE]: Suitable for children  
Hint  
• DVD-Video discs may not respond to the parental lock settings. Make sure this function  
works with your DVD-Video discs.  
To Change the Password for Parental Controls  
You can change your password for parental controls. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 20.  
To exit  
the menu  
4
5
6
Select “PASSWORD  
CHANGE”.  
Enter your new  
four-digit password  
(except for 4737).  
7
Enter your desired four-  
digit password.  
SETUP  
or  
1
4
7
2
5
8
0
3
6
9
1
4
7
2
5
8
0
3
6
9
ENTER  
ENTER  
PARENTAL LEVEL  
PASSWORD CHANGE  
ALL  
Hint  
• Record the password  
in case you forget it.  
PARENTAL menu  
SETUP  
PASSWORD  
Please enter a 4-digit password.  
PARENTAL  
SETUP  
PARENTAL  
If you forget the pass-  
word, press [4], [7], [3],  
[7] at step 4), then enter  
your new password.  
Password will be cleared  
and parental levels will  
be set to “ALL.  
PASSWORD  
Enter current password.  
OTHERS Setting  
E
You can change the other functions. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 20.  
4
5
Select the desired item.  
6 To exit the menu  
ANGLE ICON:  
SETUP  
(Default: ON)  
Set to “ON” to show the angle icon when multiple camera angles  
are available during DVD playback.  
or  
OFF  
ON  
ANGLE ICON  
AUTO POWER OFF ON  
ON  
ENTER  
OTHERS menu  
SETUP  
OTHERS  
AUTO POWER OFF:  
(Default: ON)  
Set to “ON” to automatically turn off the DVD operation and  
change the mode to VCR after 30 minutes of no use.  
ANGLE ICON  
AUTO POWER OFF  
ON  
ON  
ANGLE ICON  
ON  
ON  
AUTO POWER OFF ON  
OFF  
ENTER  
EN  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reset to the Default Setting (Except for PARENTAL Setting)  
To exit  
the menu  
1
2
3
4
SETUP  
STOP  
or  
or  
SETUP  
ENTER  
ENTER  
<SETUP MENU>  
Select “INITIALIZE”.  
Select “YES”.  
SETUP  
SETUP  
SETUP  
INITIALIZE  
Hint  
• When you cancel to  
initialize at step 3),  
select “NO”.  
Press  
twice.  
QUICK  
CUSTOM  
INITIALIZE  
QUICK  
CUSTOM  
INITIALIZE  
Initialize?  
NO  
YES  
Information  
Troubleshooting Guide  
If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the following checklist.  
PROBLEM  
CORRECTIVE ACTION  
D
V
D
V
C
R
• Make sure the power plug is connected to an AC outlet.  
No power.  
• Make sure the power is turned on.  
• Check if the power plug is connected to an AC outlet.  
• Check the batteries in the remote control.  
This unit does not respond to the  
remote control.  
• Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles  
between the sensor and the remote control.  
You have to be within 23 feet (7m) of this unit.  
• Check if the right mode is selected. If it’s not in the right mode, press [DVD] or [VCR], whichever  
you need, on the remote control.  
• Check if a cassette tape is in this unit.  
Tune your radio to an empty AM station so that you hear a lot of noises. Turn the volume up, then.  
If you hear some signal sound from the radio in response to your pressing buttons on the remote  
control, the remote control is working.  
• Interference signal may be received. Change the position and orientation of the unit.  
Poor picture or noise  
• If your antenna is connected to an antenna amplifier, the amplifier’s gain adjustment may need to  
be temporarily reduced in order for Auto-Setup to program all channels properly. Temporarily  
reduce the amplifier’s gain and preset channels. (See “To Preset the Channel Again” on page 8.)  
Cannot preset channels properly.  
• Make sure the Timer Recording is set correctly.  
Timer recording is impossible.  
V
C
R
• Make sure the  
light appears on the unit. If not, press [SUBTITLE/T-SET].  
• Make sure the VCR clock is set correctly.  
• Make sure the tape has a safety tab. If needed, cover the hole with adhesive tape.  
Cannot go into record mode.  
Activate this unit in VCR mode. Press [VCR] on the remote control so that the VCR OUTPUT light is lit.  
• Adjust tracking control for a better picture by pressing [CHANNEL L/K] on the unit or  
[SKIP/CH. GG/KK H/LL] on the remote control.  
Playback picture is partially noisy.  
• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING”.  
• Make sure the VCR is not in the Menu mode.  
Cannot view a tape but the audio is  
OK.  
• Change the RF output channel to CH4. Then select the same channel on the TV.  
• Fine tune your TV.  
No, or poor, playback picture  
• Re-check the ANT-IN and ANT-OUT connections. See pages 1 and 6.  
• Press [VCR].  
• Press [VCR] on the remote control to activate it in the VCR mode. Check if the VCR OUTPUT light  
is lit, then set it to the TV position by pressing [VCR].  
TV programs cannot be seen  
normally.  
You cannot copy a copyrighted video tape. You are experiencing copy guard protection.  
Video or color fades in and out when  
making a copy of a video tape.  
Check if this unit is in the VCR mode. If not, press [VCR] on the remote control to switch the mode.  
Cannot remove the tape.  
No picture.  
• Connect the video cables firmly.  
D
V
D
• Insert a correct video disc that plays on this unit.  
Press [DVD] on the remote control. Check if the DVD OUTPUT light is lit. Then try other DVD features.  
Set PROGRESSIVE correctly. Turn it on only if your TV has Progressive Scan and you are using the Component  
Video connections between the unit and the TV. Disable Progressive Scan for all other connections. (See page 7.)  
• Insert the disc.  
Disc cannot be played.  
No sound.  
• Clean the disc.  
• Place the disc correctly with the label side up.  
• Cancel the parental lock or change the control levels.  
• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its  
surface.  
• Connect the audio cables firmly.  
Turn the power of the audio component on.  
• Correct the audio output settings.  
• Correct the input settings on the audio component.  
• This unit does not support DTS audio. This is not a malfunction.  
• Connect this unit directly to the TV.  
No DTS audio is output.  
Distorted picture.  
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.  
• Although pictures may stop for a moment, this is not a malfunction.  
Check if the INTERLACE/PROGRESSIVE mode is set correctly according to your TV. See pages 20-21.  
• The selected language is not available for audio or subtitles on the DVD.  
This is not a malfunction.  
Audio or subtitle language does not  
match the setup.  
• The DVD does not contain sequences recorded from different camera angles. This is not a malfunction.  
The camera angle cannot be changed.  
• The DVD does not contain audio source or subtitles in the selected language.  
This is not a malfunction.  
Audio or subtitle language cannot  
be changed.  
• That operation is prohibited by this unit or the disc.  
This is not a malfunction.  
“Prohibited icon” appears on the  
screen, prohibiting an operation.  
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual  
for details on correct operations.  
• Playback from a desired track and random playback are not available during program playback.  
• Some functions are prohibited on some discs.  
EN  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Video Heads :  
Operating temperature :  
41°F (5°C) to 104°F (40°C)  
Dimensions :  
W : 17-3/16"(435mm)  
H : 3-3/4" (94mm)  
D : 9-3/16" (233mm)  
Weight :  
• Designs and specifications are subject  
to change without notice.  
• If there is a discrepancy between lan-  
guages, the default language will be  
English.  
Four Heads  
Output signal format :  
NTSC color  
Power source :  
120 V AC +/- 10%, 60 Hz +/- 0.5%  
Power consumption :  
21W (standby: 3.8W)  
Approx 6lbs (2.7kg)  
Language List  
Language  
Code  
Language  
Code  
Language  
Code  
Language  
Code  
A-B  
French [FRE]  
Frisian  
Galician  
Georgian  
German [GER]  
Greek [GRE]  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Hebrew  
Hindi  
Hungarian [HUN]  
I-K  
Icelandic [ICE]  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
Irish [IRI]  
Italian [ITA]  
Japanese [ENG]  
Javanese  
Kannada  
Kashmiri  
Kazakh  
5264  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
5467  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian [NOR]  
O-R  
Occitan  
Oriya  
Oromo(Afan)  
Panjabi  
Pashto;Pushto  
Persian  
Polish [POL]  
Portuguese [POR]  
Quechua  
Rhaeto-Romance  
Romanian [RUM]  
Russian [RUS]  
S
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
Setswana  
Shona  
Sindhi  
Singhalese  
5957  
5953  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
6061  
Siswat  
Slovak  
Slovenian  
Somali  
Spanish [SPA]  
Sundanese  
Swahili  
6565  
6557  
6558  
6561  
5165  
6567  
6569  
6568  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
Swedish [SWE]  
T
Tagalog  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Turkish [TUR]  
Turkmen  
Twi  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
Basque  
Bengali;Bangla  
Bhutani  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
6266  
6367  
6459  
6461  
6467  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
Bihari  
Bislama  
Breton  
Bulgarian  
Burmese  
Byelorussian  
C-E  
Cambodian  
Catalan  
Chinese [CHI]  
Corsican  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
U-Z  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
Croatian  
Kinyarwanda  
Kirghiz  
Kirundi  
Korean [KOR]  
Kurdish  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
Czech [CZE]  
Danish [DAN]  
Dutch [DUT]  
English [ENG]  
Esperanto  
Estonian  
L-N  
Laothian  
Latin  
Latvian;Lettish  
Lingala  
Lithuanian  
5861  
5847  
5868  
5860  
5866  
F-H  
Faroese  
Fiji  
Finnish [FIN]  
5261  
5256  
5255  
If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language  
setting on page 19. If you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)  
Limited Ninety-Day Warranty  
®
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days  
from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. For complete  
warranty details and exclusions, check with your local RadioShack store.  
RadioShack Customer Relations  
300 RadioShack Circle, Fort Worth, TX 76102  
04/04  
EN  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Español  
2
3
4
5
6
Conexiones  
Activación de la unidad  
por primera vez  
AJUSTE DE RELOJ  
1
4
MES  
1 0  
DIA  
– –  
AÑO  
– – – –  
/
Consulte la “Basic TV Connection”  
en la página delantera antes de  
utilizar esta unidad.  
o
HORA MINUTO AM/PM  
– – – – – –  
VCR  
:
VCR  
Canal de salida RF  
Si el canal 3 se está utilizando para  
una transmisión.  
1
Seleccione el mes actual.  
Encienda el televisor y sin-  
tonice al canal 3.  
1)Programe su televisor al canal 4.  
2)Inserte una cinta pregrabada en esta  
unidad.  
3)Pulse [OUTPUT] en la unidad para  
que se encienda la luz VCR OUT-  
PUT.  
• Si aparece ruido en la pantalla de  
TV, presione [VCR/TV] en el mando  
a distancia.  
4)Pulse una vez [PLAY B].  
5)Después de unos segundos, pulse  
[PLAY B] en la unidad durante 3  
segundos.  
• El canal de salida RF cambiará del  
canal 3 al canal 4 y podrá ver una  
imagen reproducida.  
• Cuando no aparezca una imagen en  
la pantalla del televisor, repita el  
paso 4).  
Si el canal 3 se está utilizando para una trans-  
misión, vea la sección “Canal de salida RF”.  
AJUSTE DE RELOJ  
MES  
1 0  
DIA  
0 2  
AÑO  
– – – –  
2
/
Control Remoto  
Pantalla del televisor  
POWER  
o
HORA MINUTO AM/PM  
– – – – – –  
:
SELEC. IDIOMA  
ENGLISH  
FRANCAIS  
Seleccione el día actual.  
B ESPAÑOL  
[ON]  
o
AJUSTE DE RELOJ  
MES  
1 0  
DIA  
0 2  
AÑO  
2 0 0 6  
/
o
HORA MINUTO AM/PM  
– – – – – –  
:
3
CA 01  
Seleccione el año actual.  
6)Pulse [STOP C] para parar la repro-  
ducción.  
AJUSTE AUTO  
Instalación de las pilas  
del control remoto  
2
AJUSTE DE RELOJ  
MES  
1 0  
DIA  
AÑO  
/
0 2 LUN 2 0 0 6  
3
2
1
Conecta el cable de la caja de canales de cable o la  
caja de satélite en la toma ANT-IN de la unidad?  
SI  
o
HORA MINUTO AM/PM  
0 5 – – – –  
:
Si  
Pulse [MENU]  
Seleccione la hora actual.  
para salir.  
NO  
Conmutación VCR/DVD  
3
No Espere unos minutos.  
Después del escaneo...  
• El sintonizador se detiene en el canal  
memorizado más bajo.  
OPEN/CLOSE  
POWER  
A
OPEN/CLOSE  
/EJECT  
POWER  
SPEED  
AUDIO  
STOP/EJECT  
PLAY  
STOP  
PLA  
Y
P
/
A
O
P
O
CHANNEL  
V
C
R
O
U
T
P
U
T
DVD  
AJUSTE DE RELOJ  
VIDEO  
L
-
AUDIO  
-
R
L
K
E
REW  
F
.FWD  
D
REC/OTR  
1
4
7
2
5
8
3
6
9
SKIP/CH.  
MES  
1 0  
DIA  
AÑO  
VCR/TV  
SLOW  
/
0 2 LUN 2 0 0 6  
Botón VCR  
Botón DVD  
o
0
VCR  
+
1 0  
DISPLAY  
DVD  
PAUSE  
• Puede seleccionar sólo los canales memo-  
rizados en esta unidad con  
[SKIP/CH. G/K H/LL]  
HORA MINUTO AM/PM  
0 5 4 0 – –  
:
PLAY  
STOP  
REC/OTR  
MENU  
Luz VCR OUTPUT  
Luz DVD OUTPUT  
Botón OUTPUT  
(o [CHANNEL K/LL]).  
ENTER  
VCR OUTPUT DVD  
• Si aparece nuevamente “AJUSTE AUTO”  
en la pantalla de TV, verifique las conex-  
iones de cable. Presione nuevamente [B].  
SETUP TOP MENU  
RETURN  
Seleccione los minutos actuales.  
AJUSTE DE RELOJ  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
ZOOM  
SUBTITLE  
T
-SET  
ANGLE  
REPEAT  
A-B  
Ajuste del reloj  
7
8
5
MES  
1 0  
DIA  
AÑO  
VCR  
/
0 2 LUN 2 0 0 6  
VCR  
MODO VCR  
Pulse [VCR] en el control remoto.  
(Compruebe que está encendida la luz  
VCR OUTPUT.)  
o
HORA MINUTO AM/PM  
0 5  
:
4 0  
P M AM  
- M E N U -  
1
MENU  
B PM  
PROGRAMAR  
AUTOREPETIR [OFF]  
AJUSTE CANAL  
B AJUSTE DE RELOJ  
SELEC. IDIOMA  
SALIDA DEL AUDIO  
TV ESTEREO [ON]  
SAP  
Seleccione "AM" o "PM".  
MODO DVD  
Pulse [DVD] en el control remoto.  
(Compruebe que está encendida la luz  
DVD OUTPUT.)  
Para salir de la pantalla AJUSTE DE  
RELOJ  
Si no se ha ajustado el reloj,  
aparece la pantalla AJUSTE  
DE RELOJ cuando pulse  
[MENU]. En este caso, vaya  
al paso 2).  
o
Consejo  
• Si pulsa sólo [OUTPUT] en el panel  
frontal NO cambía el modo del control  
remoto. DEBE seleccionar también el  
modo correcto en el control remoto.  
ES  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Español  
Reproducción de la grabadora de vídeo  
Reproducción de DVD/CD  
6
7
Antes: Encienda el televisor y cambie al canal 3.  
• Si el canal 3 se está utilizando para una transmisión, vea  
la sección “Canal de salida RF”.  
Antes: Encienda el televisor, amplificador y otros equipos que puedan estar  
conectados a esta unidad. Asegúrese que el televisor y el sintoamplificador de  
audio (de venta en los comercios) están en el canal correcto.  
DVD  
VCR  
VCR  
DVD-V  
CD  
4
OPEN/CLOSE  
/EJECT  
OPEN/CLOSE  
/EJECT  
POWER  
POWER  
SPEED  
AUDIO  
SPEED  
AUDIO  
Para empezar  
la reproducción  
1
3
2
4
1
3
2
1
1
OPEN/CLOSE  
/EJECT  
1
4
7
2
5
8
3
6
9
1
4
7
2
5
8
3
6
9
POWER  
SKIP/CH.  
PLAY  
SKIP/CH.  
VCR/TV  
SLOW  
VCR/TV  
SLOW  
0
VCR  
+1 0  
DVD  
Ponga un disco con la  
etiqueta hacia arriba.  
0
VCR  
+1 0  
DVD  
DISPLAY  
PAUSE  
DISPLAY  
PAUSE  
Para parar la  
reproducción  
Para expulsar  
OPEN/CLOSE  
/EJECT  
PLAY  
STOP  
Para empezar  
la reproducción  
Para parar la  
PLAY  
4
STOP  
reproducción  
STOP  
3
REC/OTR  
REC/OTR  
STOP  
PLAY  
2
3
4
Control remoto  
8
Modo DVD  
Modo de grabadora de vídeo  
Disco/cinta  
(BOordteónnalfabético)  
1
4
7
2
5
8
0
3
Para seleccionar el canal.  
El botón +10 no tiene efecto  
en el modo de grabadora de  
vídeo.  
6
Para seleccionar directamente  
el capítulo o el título.  
Para seleccionar directamente  
la canción.  
9
+1 0  
Para buscar en avance/retroceso  
en un disco.  
Para empezar la reproducción en avance/  
retroceso lento durante el modo de pausa.  
Para buscar en avance/  
retroceso en un disco.  
Para el avance/retroceso  
de una cinta.  
Para seleccionar un ítem  
en el menú de la grabadora  
de vídeo.  
ENTER  
Para avanzar al siguiente  
menú de la grabadora de  
vídeo.  
Para mover el cursor y  
determinar su posición.  
Para mover el curso y  
determinar su posición.  
OPEN/CLOSE  
POWER  
/EJECT  
SPEED  
AUDIO  
Para volver un paso  
durante el ajuste del reloj y  
temporizador.  
A-B  
Para repetir entre los puntos Para repetir entre los puntos  
A y B elegidos  
1
4
7
2
5
8
3
6
9
A y B elegidos.  
ANGLE  
AUDIO  
SKIP/CH.  
Para seleccionar los ángulos  
de la cámara en un disco.  
VCR/TV  
SLOW  
Para seleccionar el idioma de Para seleccionar ESTÉREO,  
audio en un disco. L-ch o R-ch.  
Para borrar los marcadores.  
Para borrar los marcadores. Para retirar el Nº de estado  
CLEAR/  
C. RESET  
Para salir del menú de la  
grabadora de vídeo.  
Para reponer el contador de  
cinta.  
0
+1 0  
en la entrada de programa.  
Para borrar los números  
Para borrar los números  
entrados incorrectamente.  
DISPLAY  
VCR  
DVD  
PAUSE  
entrados incorrectamente.  
Para borrar el punt para la  
Para borrar el punt para la  
repetición A-B.  
repetición A-B.  
DISPLAY  
DVD  
Para indicar el modo de  
disco actual.  
Para indicar el modo de  
disco actual.  
Para indicar la hora actual,  
contador de cinta y canal.  
PLAY  
Para seleccionar el modo  
de salida de DVD.  
Para seleccionar el modo de  
salida de DVD.  
STOP  
Para activar el mando a  
distancia en el modo DVD.  
Para llamar el menu en un  
Para activar el mando a  
distancia en el modo DVD.  
REC/OTR  
MENU  
MENU  
MODE  
Para llamar el menú de la  
grabadora de vídeo.  
disco.  
ENTER  
Para disponer el orden de  
reproducción o la  
reproducción aleatoria.  
Para activar/desactivar el  
envolvente virtual.  
Para activar/desactivar el  
nivel del negro.  
Para activar/desactivar el  
envolvente virtual.  
SETUP TOP MENU  
RETURN  
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
ZOOM  
OPEN/CLOSE  
/EJECT  
Para abrir o cerrar la bandeja Para abrir o cerrar la bandeja Para expulsar el videocasete  
del disco.  
del disco.  
de la grabadora de vídeo.  
SUBTITLE  
T-SET  
ANGLE  
REPEAT  
A-B  
Para hacer una pausa de la  
reproducción o grabación de la cinta.  
Para avanzar la reproducción  
un cuadro a la vez.  
Para hacer una pausa de  
reproducción del disco.  
Para avanzar la reproducción  
un cuadro a la vez.  
PAUSE  
Para hacer una pausa en la  
reproducción del disco.  
Para empezar la reproducción  
del disco.  
Para empezar la reproducción  
del disco.  
Para empezar la reproducción  
de la cinta.  
PLAY  
POWER  
Para encender o apagar la  
unidad.  
Para encender o apagar la  
unidad.  
Para encender o apagar la  
unidad.  
REC/OTR  
REPEAT  
RETURN  
Para empezar una grabaciòn  
o una grabaciòn de un toque.  
Para reproducir repetidamente  
un capítulo o título.  
Para reproducir repetidamente  
una canción o disco.  
Para volver a la operación  
previa en el menú.  
Para volver a la operación  
previa en el menú.  
Para buscar una canción.  
Para buscar la hora.  
Para colocar o buscar los  
marcadores.  
SEARCH  
MODE  
Para buscar un capítulo, título u hora.  
Para colocar o buscar los  
marcadores.  
Para llamar el menú de  
búsqueda de índice u hora.  
SETUP  
Para llamar el menú de  
programación de DVD.  
Para llamar el menú de  
programación de DVD.  
SKIP/CH.  
SKIP/CH.  
Para cambiar de canal.  
Para ajustar manualmente el  
seguimiento durante la reproducción.  
Para saltar capítulos.  
Para saltar canciones.  
SLOW  
Para ver la cinta en cámara  
lenta.  
SPEED  
STOP  
Para seleccionar la velocidad  
de grabación.  
Para parar la reproducción o  
grabación.  
Para parar la reproducción. Para parar la reproducción.  
SUBTITLE  
T-SET  
Para poner la grabadora de  
vídeo en el modo de espera  
para una grabación con temporizador.  
Para seleccionar subtítulos  
en un disco.  
TOP MENU  
VCR  
Para llamar el menú superior  
en un disco.  
Para seleccionar el modo de  
salida de la grabadora de vídeo.  
Para activar el mando a distancia  
en el modo de la grabadora de vídeo.  
VCR/TV  
ZOOM  
Para seleccionar la posición  
de DVD o posición del televisor.  
Para seleccionar la posición de  
CD o la posición del televisor.  
Para seleccionar la posición de la  
grabadora de vídeo o posición del televisor.  
Para ampliar parte de la  
imagen. (x2/x4)  
ES  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Use Guide  
2
3
Connections  
Turn on the unit for the  
CLOCK SET  
MONTH DAY YEAR  
1
4
first time  
or  
1 0 – – – – – –  
/
Please refer to “Basic TV  
Connection” on the front page  
before you use this unit.  
RF Output Channel  
If channel 3 is already occupied for  
broadcasting,  
1)Set your TV to channel 4.  
2)Insert a pre-recorded tape into this  
unit.  
3)Press [OUTPUT] on the unit so that  
the VCR OUTPUT light is lit.  
• If noise appears on the TV screen,  
press [VCR/TV] on the remote control.  
4)Press [PLAY B] once.  
5)After a few seconds, hold [PLAY B]  
on the unit for 3 seconds.  
• The RF output channel will change  
to channel 4 from channel 3 and you  
will see a playback picture.  
• When a picture does not appear on  
the TV screen, repeat step 4).  
6)Press [STOP C] to stop playback.  
HOUR MINUTE AM/PM  
– – – – – –  
VCR  
:
VCR  
1
Select the current month.  
Turn on the TV and set it  
to channel 3.  
• If channel 3 is already occupied for broadcasting,  
see“RF Output Channel” section.  
CLOCK SET  
MONTH DAY  
1 0 0 2  
YEAR  
– – – –  
/
2
or  
or  
or  
Remote Control TV Screen  
POWER  
HOUR MINUTE AM/PM  
– – – – – –  
:
LANGUAGE SELECT  
B ENGLISH  
FRANCAIS  
ESPAÑOL  
[ON]  
Select the current day.  
or  
4
5
CLOCK SET  
MONTH DAY  
1 0 0 2  
YEAR  
2 0 0 6  
/
HOUR MINUTE AM/PM  
– – – – – –  
:
3
Installing the Batteries  
for the Remote Control  
CH 01  
2
Select the current year.  
AUTO SET UP  
3
2
1
CLOCK SET  
MONTH DAY  
YEAR  
1 0 0 2 MON 2 0 0 6  
/
Do you connect the cable from the cable box or  
the satellite box to the unit’s ANT-IN jack?  
YES  
HOUR MINUTE AM/PM  
0 5 – – – –  
:
VCR/DVD Switching  
3
Yes Press [MENU]  
Select the current hour.  
to exit.  
OPEN/CLOSE  
POWER  
A
OPEN/CLOSE  
/EJECT  
POWER  
SPEED  
AUDIO  
NO  
STOP/EJECT  
PLAY  
STOP  
PLAY  
P
/
A
O
P
O
CHANNEL  
V
C
R
O
U
T
P
U
T
DVD  
VIDEO  
L
-
AUDIO  
-
R
L
K
E
REW  
F
.FWD  
D
REC/OTR  
1
4
7
2
5
8
3
6
9
SKIP/CH.  
VCR/TV  
SLOW  
No Please wait for a few minutes.  
VCR button  
DVD button  
6
0
VCR  
+
1 0  
CLOCK SET  
DISPLAY  
DVD  
PAUSE  
After scanning...  
MONTH DAY  
YEAR  
PLAY  
STOP  
or  
• The tuner stops on the lowest memorized  
channel.  
You can select only the channels memo-  
rized in this unit by using  
[SKIP/CH. G/K H/LL]  
(or [CHANNEL K/LL]).  
1 0 0 2 MON 2 0 0 6  
/
REC/OTR  
MENU  
VCR OUTPUT light  
DVD OUTPUT light  
OUTPUT button  
ENTER  
HOUR MINUTE AM/PM  
0 5 4 0 – –  
VCR OUTPUT DVD  
SETUP TOP MENU  
RETURN  
:
SEARCH  
MODE  
CLEAR/  
C. RESET  
MODE  
ZOOM  
SUBTITLE  
T
-SET  
ANGLE  
REPEAT  
A-B  
Select the current minute.  
CLOCK SET  
• If “AUTO SET UP” appears on the TV  
screen again, check the cable connections.  
Then, press [B] once again.  
7
8
VCR MODE  
Clock Setup  
5
MONTH DAY  
YEAR  
Press [VCR] on the remote control.  
1 0 0 2 MON 2 0 0 6  
/
or  
(Verify that the VCR OUTPUT light is lit.)  
VCR  
HOUR MINUTE AM/PM  
VCR  
0 5  
:
4 0  
P M AM  
B PM  
- M E N U -  
1
MENU  
DVD MODE  
Press [DVD] on the remote control.  
(Verify that the DVD OUTPUT light is lit.)  
TIMER PROGRAMMING  
AUTO REPEAT [OFF]  
CHANNEL SET UP  
B CLOCK SET  
Select “AM” or “PM”.  
LANGUAGE SELECT  
AUDIO OUT  
To exit the CLOCK SET  
screen  
TV STEREO  
SAP  
[ON]  
Hint  
• If the clock is not set, the  
CLOCK SET screen  
appears when you press  
[MENU]. In this case, go  
to step 2).  
or  
• Pressing only [OUTPUT] on the front  
panel DOES NOT switch the mode of the  
remote control. You MUST select the cor-  
rect mode on the remote control.  
EN  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Use Guide  
VCR Playback  
DVD/CD Playback  
6
7
Before: Turn on the TV and set it to channel 3.  
• If channel 3 is already occupied for broadcasting, see “RF  
Output Channel” section.  
Before: Turn on the TV, amplifier and any other components which are con-  
nected to this unit. Make sure the TV and audio receiver (commercially avail-  
able) are set to the correct channel.  
DVD  
VCR  
VCR  
DVD-V  
CD  
4
OPEN/CLOSE  
/EJECT  
OPEN/CLOSE  
/EJECT  
POWER  
POWER  
SPEED  
AUDIO  
SPEED  
AUDIO  
To start  
playback  
1
3
2
4
1
3
2
1
1
OPEN/CLOSE  
/EJECT  
1
4
7
2
5
8
3
6
9
1
4
7
2
5
8
3
6
9
POWER  
SKIP/CH.  
SKIP/CH.  
PLAY  
VCR/TV  
SLOW  
VCR/TV  
SLOW  
Insert a disc with  
label facing up.  
0
VCR  
+1 0  
DVD  
0
VCR  
+1 0  
DVD  
DISPLAY  
PAUSE  
DISPLAY  
PAUSE  
To stop  
playback  
To eject  
OPEN/CLOSE  
/EJECT  
To start  
playback  
To stop  
playback  
PLAY  
4
PLAY  
STOP  
STOP  
STOP  
3
REC/OTR  
REC/OTR  
STOP  
PLAY  
2
3
4
Remote Control  
8
VCR mode  
DVD mode  
Disc/Tape  
(BAulpthtaobnetical order)  
1
4
7
2
5
8
0
3
To select channel.  
The +10 button has no effect  
in VCR mode.  
6
To select chapter or title  
directly.  
To select track directly.  
9
+1 0  
To search forward/backward  
through a disc.  
To begin slow forward/  
reverse playback during the  
pause mode.  
To search forward/backward  
through a disc.  
To forward/backward a tape.  
To select an item  
on the VCR Menu.  
To advance to the  
next VCR Menu.  
To go back one step  
during clock and  
timer setting.  
ENTER  
To move the cursor and  
determine its position.  
To move the cursor and  
determine its position.  
OPEN/CLOSE  
/EJECT  
POWER  
SPEED  
AUDIO  
A-B  
To repeat between your  
chosen point A and B.  
To repeat between your  
chosen point A and B.  
1
4
7
2
5
8
3
6
9
ANGLE  
AUDIO  
To select camera angles on  
a disc.  
SKIP/CH.  
To select audio languages on To select STEREO,  
a disc.  
VCR/TV  
SLOW  
L-ch or R-ch.  
To clear the markers.  
To remove status number in  
program input.  
To clear the markers.  
To clear the numbers  
entered incorrectly.  
To cancel the point for A-B  
repeat.  
CLEAR/  
C. RESET  
0
VCR  
+1 0  
DVD  
To exit the VCR Menu.  
To clear the numbers entered  
To reset the tape counter.  
DISPLAY  
PAUSE  
incorrectly.  
To cancel the point for A-B  
repeat.  
DISPLAY  
DVD  
To display the current disc  
mode.  
To display the current disc  
mode.  
To select the DVD output  
mode.  
To activate the remote  
control in DVD mode.  
To display the current time,  
tape counter, and channel.  
PLAY  
To select the DVD output  
mode.  
To activate the remote control  
STOP  
REC/OTR  
MENU  
in DVD mode.  
MENU  
MODE  
To call up the Menu  
on a disc.  
To call up the VCR Menu.  
ENTER  
To arrange the playing  
order or play randomly.  
To set black level on/off.  
To set virtual surround on/off.  
SETUP TOP MENU  
RETURN  
To set virtual surround on/off.  
SEARCH  
MODE  
CLEAR/  
C. RESET  
OPEN/CLOSE  
/EJECT  
MODE  
ZOOM  
To eject the video cassette  
from the cassette  
compartment.  
To pause tape playback or  
recording.  
To advance playback  
one frame at a time.  
To open or close the disc  
tray.  
To open or close the disc  
tray.  
SUBTITLE  
T-SET  
ANGLE  
REPEAT  
A-B  
PAUSE  
To pause disc playback.  
To advance playback  
one frame at a time.  
To pause disc playback.  
To begin disc playback.  
To turn the unit on or off.  
To begin disc playback.  
To begin tape playback.  
PLAY  
POWER  
To turn the unit on or off.  
To turn the unit on or off.  
REC/OTR  
REPEAT  
RETURN  
To start a recording or  
One Touch Recording.  
To play a chapter or title  
repeatedly.  
To play a track or disc  
repeatedly.  
To return to the previous  
operation in menu.  
To return to the previous  
operation in menu.  
SEARCH  
MODE  
To search track.  
To search chapter, title or time.  
To search time.  
To call up the index or time  
search menu.  
To set or search the markers.  
To set or search the markers.  
SETUP  
To call up the DVD setup  
menu.  
To call up the DVD setup  
menu.  
To change channels.  
To adjust the tracking  
manually during playback.  
SKIP/CH.  
SKIP/CH.  
To skip chapters or titles.  
To skip tracks.  
SLOW  
To view the tape in slow  
motion.  
SPEED  
STOP  
To select the recording  
speed.  
To stop playback.  
To stop playback.  
To stop playback or recording.  
SUBTITLE  
T-SET  
To put the VCR into standby  
mode for a Timer Recording.  
To select subtitles on a disc.  
TOP MENU  
VCR  
To call up the Top Menu  
on a disc.  
To select the VCR output  
mode.  
To activate the remote  
control in VCR mode.  
VCR/TV  
ZOOM  
To select DVD position or  
TV position.  
To select CD position or TV To select VCR position or  
position. TV position.  
To magnify part of a picture.  
(x2/x4)  
03A06  
Printed in China  
1VMN22991 / E8A95UD ★★★★★  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Quasar Garage Door Opener EUR511514 User Guide
Radio Shack Cordless Telephone ET 543 User Guide
RCA VCR VR355 VR545 User Guide
Ricoh Printer MP 2000L User Guide
Samsung Baby Monitor SNH E6411BN User Guide
Samsung Digital Camera EC WB2100BPBUS User Guide
Sanyo CRT Television DS13204 User Guide
Sapphire Audio Speaker Sapphire XLs User Guide
Sea Sea Digital Camera 06138 User Guide
Senco Nail Gun PC0960 User Guide