Simply plug the audio outputs of any component – such as an A/V receiver, CD, or MP3 player – into the audio
inputs of the sender (#15-1938) and plug the sender into an AC outlet. Then, plug RadioShack PowerLine Digital
Receiver/Speakers (# 40-1462) into any electrical outlet in your home. If you have your own speakers, just plug
your RadioShack PowerLine Digital Audio Receiver/Amplifier (# 15-1937) into any electrical outlet and connect
your speakers. Using this receiver, you can control the volume, balance, bass and treble of your remote speakers.
Best of all, the RadioShack Networked Home Entertainment System is completely portable.
Thank you for buying the RadioShack Networked Home Entertainment
System. Now you can send high-quality digital stereo audio to any
room in your home that has an AC outlet, without running cable. This
system uses the existing AC electrical wiring in your home to send
digital signals.
Networked Home
Entertainment System
1. Connect an audio source to your PowerLine
sender and plug into any AC outlet.
CD Player
Receiver
All items shown below are sold separately. 15-1938 is
required for the PowerLine system to work.
Signal
Path
1. Make certain that your audio source is powered off.
AUDIO IN AC IN
SPEAKER IN
2. Connect the line level stereo outputs from the audio source, such
Audio Input
Level Lo/Hi
as a CD player to the sender's AUDIO IN. Match LEFT to L and
RIGHT to R.
Or,
PowerLine Digital Audio Sender
Includes Sender and Power cord.
Connect the surround or speaker outputs from your Home Theater
System or A/V receiver to the sender's SPEAKER IN.
DO NOT connect both cables to the sender's AUDIO IN and
SPEAKER IN.
Line In
Connection
Speaker In
Connection
15-1938
3. Connect the AC power cord’s female plug end into AC IN, and
then plug the AC cord’s other end into a standard AC outlet.
4. Turn on the audio source, and then press the POWER button on
your sender.
Your sender’s Audio Input Level Lo/Hi is preset to Lo. If you hear
volume distortion, adjust the Audio Input Level Lo/Hi to Hi.
Power
Sender Rear View
Note: Do not use two senders in the same place.
2. Connect PowerLine speakers to any AC outlet
in your home,
PowerLine Amplified Receiver/ Speaker System
Includes Amplified Receiver/Speaker, Satellite Speaker,
Speaker Wire, and Power cord.
40-1462
SPEAKER OUT L R M S AC IN
1.Split apart about 4 inches (10.16 cm) of speaker wire on
each end. Then use a wire stripper to strip 1/2 in. (1.27 cm)
of insulation from each wire’s end.
OR
2.Connect one end of the wire to SPEAKER OUT on the
Amplified Receiver / Speaker. (Be sure to match the
polarity of the wires when making your connection.)
3. Connect the other end to the satellite speaker. Be sure to
correctly match polarity.
BASS
BALANCE
VOLUME
4. Insert the AC power cord’s female plug end into the
receiver/speaker’s AC IN jack, and then plug the AC cord’s
other end into a standard AC outlet.
POWER
TREBLE
Sattelite Speaker’s Rear
View
Amplified Receiver / Speaker’s Rear View
Speaker Settings
OR, Connect a PowerLine receiver to any AC
outlet in your home, and then connect to it, either
A) ...an audio source with speakers, or
B) ...non-PowerLine speakers.
• The default setting for your amplified speaker is stereo (S). If you connect two pairs of the 40-1462, you must set one to left (L)
and one to right (R).
• If you use a single Amplified Receiver / Speaker, set LRMS to mono (M).
PowerLine Digital Audio Receiver/Amplifier
Includes Receiver/Amplifier and Power cord.
A
B
OR
LINE OUT SPEAKER OUT
POWER
15-1937
Speaker Out
1.Power off all system devices before making any connections.
Line Out
2.Connect a matching set of speakers (8 ohms) to the Amplifier /
Receiver's SPEAKER OUT.
Or, connect stereo audio cables from the Amplifier / Receiver's LINE
OUT to the line level inputs on your A/V receiver. (Match LEFT to L and
RIGHT to R).
3.Insert the AC power cord’s female plug end into the Amplifier /
Receiver's POWER jack, and then plug the AC cord’s other end into a
standard AC outlet.
VOLUME
BALANCE
POWER
BASS
TREBLE
Please read this user’s guide before
installing, setting up and using your new product
Amplifier / Receiver Rear View
Download from Www.Somanuals.com. All Manuals Search And Download.
|