CONTENTS
Using AC Power ................................................................................................................ 1
Using Batteries .................................................................................................................. 1
Using DC Power ................................................................................................................ 2
Listening Safely ................................................................................................................. 2
Traffic Safety ..................................................................................................................... 2
Using the Radio ................................................................................................................. 3
Loading a Cassette Tape .................................................................................................. 3
Playing a Cassette Tape ................................................................................................... 4
Recording .......................................................................................................................... 4
Recording from the Radio .......................................................................................... 4
Making Live Recordings ............................................................................................. 4
Tape Tips ........................................................................................................................... 4
Restoring Tape Tension and Sound Quality ............................................................... 4
Erasing Tapes ............................................................................................................ 5
Preventing Accidental Erasure ................................................................................... 5
Cleaning the Tape-Handling Parts ............................................................................. 5
Care .................................................................................................................................. 6
Specifications .................................................................................................................... 6
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Press down on the tabs above the battery
compartment cover and pull the cover
down to remove it.
2. Insert the barrel plug into the recorder’s
DC 9V jack.
3. Plug the other end of the adapter into the
12V power source.
2. Place the batteries in the compartment as
indicated by the polarity symbols (+ and
–) marked inside.
Notes:
• If the cassette recorder does not operate
properly when you use DC power, be
sure the 12V source (such as a cigarette-
lighter socket) is clean and that the
adapter’s plug is pushed all the way into
the socket.
3. Replace the cover.
When the sound becomes weak or distorted
or the cassette recorder stops operating prop-
erly, replace the batteries.
Warning: Dispose of old batteries promptly
and properly. Do not burn or bury them.
• Disconnect the adapter when you are not
using the cassette recorder.
Caution: If you do not plan to use the cas-
sette recorder with batteries for several days,
remove the batteries. Batteries can leak
chemicals that can destroy electronic parts.
• Internal batteries (if installed) automati-
cally disconnect when you plug the
adapter into the DC 9V jack.
LISTENING SAFELY
USING DC POWER
To protect your hearing, follow these guide-
lines when you use headphones.
You can power the cassette recorder from a
12V power source (such as a vehicle’s
cigarette-lighter socket) using a 9V, 500 mA
DC adapter and a size M Adaptaplug™
connector (neither supplied). Both are
available at your local RadioShack store.
• Set the volume to the lowest setting
before you begin listening. After you
begin listening, adjust the volume to a
comfortable level.
• Do not listen at extremely high volume
levels. Extended high-volume listening
can lead to permanent hearing loss.
Cautions:
You must use a power source
that supplies 9V DC and deliv-
ers at least 500 mA. Its center
• Once you set the volume, do not increase
it. Over time, your ears adapt to the vol-
ume level, so a volume level that does
not cause discomfort might still damage
your hearing.
!
tip must be set to negative and its plug
must fit the cassette recorder’s DC 9V
jack. Using an adapter that does not meet
these specifications could damage the
cassette recorder or the adapter.
TRAFFIC SAFETY
• Always connect the DC adapter to the
cassette recorder before you connect it to
the power source. When you finish, dis-
connect the adapter from the power
source before you disconnect it from the
cassette recorder.
Do not wear headphones while operating a
motor vehicle or riding a bicycle. This can cre-
ate a traffic hazard and could be illegal in
some areas.
Even though some headphones let you hear
some outside sounds when listening at normal
volume levels, they still can present a traffic
hazard.
1. Set the adapter’s voltage switch to 9V, if
necessary, then connect the Adaptaplug
to the DC adapter’s cord so the tip reads
TIP–.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
PHONES — connect a pair of TONE HIGH/LOW — slide TONE
headphones (not supplied) with to high to enhance the treble
a 1/8-inch (3.5-mm) plug. Your lo- sound or to LOW to enhance the
cal RadioShack store carries a bass sound.
wide selection of headphones.
Insert the headphones’ 1/8-inch
BAND AM/FM/FM STEREO — slide to se-
lect the band. Select FM STEREO to hear
sound in stereo. If the reception using FM
STEREO is weak, select FM instead. The
sound will be monaural, but the reception
should improve.
(3.5-mm) plug into the cassette
recorder’s PHONES jack.
TUNING — rotate to select the desired AM
or FM station.
FUNCTION
OFF/TAPE/RADIO
slide to turn the radio
on and off and to use
the cassette functions.
RADIO
—
Note: Connecting headphones
automatically disconnects the
built-in speaker.
Antenna — to get the best FM re-
ception, fully extend the telescoping
antenna.
The AM antenna is built-in. For the
best AM reception, rotate the radio.
PLAY
VOLUME
—
rotate PAUSE
—
press to
RECORD — press to record from the radio or live, using
the built-in MIC.
to adjust the sound temporarily stop a tape.
volume.
Press again to resume
play, recording, rewind-
ing, or fast-forwarding.
Note: Sometimes taped AM broadcasts produce a whis-
tling sound that you can hear, called a “beat.” Slide
BEAT CUT (on the back of the radio/cassette player) to
the position that produces the best quality recording.
The radio/cassette
player’s automatic
level control circuitry
automatically adjusts
the recording level.
STOP/EJECT
—
press to
stop tape play, recording,
fast-forwarding, or rewinding,
or to open the cassette com-
partment door.
Adjusting VOLUME
does not affect the
recording.
REWIND — press to rewind a tape to the desired location.
Note: The radio/cassette
player’s auto stop function
saves battery life by turning
off the motor and releasing
the tape-handling parts when
the tape reaches its end.
FAST-F — press to fast-forward a tape to the desired location.
USING THE RADIO
LOADING A CASSETTE TAPE
1. Set FUNCTION to RADIO to turn on the
1. Take up any slack in the tape by turning
the cassette’s hub with a pencil or your
finger. If you do not remove excess slack,
the tape might become tangled in the
radio.
2. Set BAND to the desired setting (AM, FM,
or FM STEREO).
record/playback
mechanism.
Avoid
touching the tape.
3. Adjust VOLUME as desired.
2. Press STOP/EJECT to open the cassette
4. Rotate TUNING to select a radio station.
compartment door.
5. When finished, set FUNCTION to TAPE to
turn off the radio.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Load the cassette with its open edge fac-
ing up, its full reel to the right, and the
side you want to play facing out.
3. Set BAND to the desired setting.
4. Adjust TUNING to the station you want to
record.
4. Gently close the compartment door.
5. Press RECORD to begin recording. Both
PLAY and RECORD lock down.
PLAYING A CASSETTE TAPE
6. Press STOP/EJECT to stop recording.
1. Set FUNCTION to TAPE.
Both RECORD and PLAY release.
2. Load a cassette tape.
3. Press PLAY.
Making Live Recordings
Follow these steps to make a live recording
using the built-in microphone.
4. Adjust VOLUME as desired.
5. Press STOP/EJECT to stop playback
before it automatically stops at the end of
the tape. Press STOP/EJECT again to
open the cassette compartment so you
can remove the cassette tape.
1. Load a blank cassette tape or one you
want to record over into the cassette
compartment.
2. Set FUNCTION to TAPE.
3. Place the cassette recorder 2–3 feet from
the recording source.
RECORDING
You can record from the radio, or use the
built-in microphone to make a live recording.
4. Press RECORD to begin recording. Both
PLAY and RECORD lock down.
Caution: Before you load a cassette tape for
recording, be sure its erase-protection tabs
are in place. If you force down RECORD when
that side’s erase-protection tab is missing, you
can damage the record mechanism (see “Pre-
venting Accidental Erasure” on Page 5).
5. Press STOP/EJECT to stop recording.
Both RECORD and PLAY release.
TAPE TIPS
Restoring Tape Tension and
Sound Quality
Note: Tape quality greatly affects the quality
of the recording. We recommend extended-
range or low noise type 1 regular length (60-
or 90-minute) normal-bias cassette tapes. We
do not recommend long-play cassette tapes
such as C-120s because they are extremely
thin and can easily tangle in the playback
mechanism.
After you play a cassette tape several times,
the tape might become tightly wound on the
reels. This can cause playback sound quality
to deteriorate.
To restore the sound quality, fast-forward the
tape from the beginning to the end of one
side, then completely rewind it. Then loosen
the tape reels by gently tapping each edge of
the cassette on a flat surface.
Recording from the Radio
1. Load a blank cassette tape or one you
want or record over into the cassette
compartment.
Caution: Be careful not to damage the cas-
sette when tapping it. Do not touch the ex-
posed tape or allow any sharp objects near
the cassette.
2. Set FUNCTION to RADIO.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Open the cassette compartment door and
press PLAY to expose the tape-handling
parts.
Erasing Tapes
To record over a cassette tape, simply record
as usual. The cassette deck records over the
previous recording.
4. Hold down the erase-protection tab sen-
sor, then press RECORD to expose the
record/playback and erase heads.
You can quickly erase both sides of a cassette
tape using a RadioShack bulk tape eraser.
Note: If you use metal or high-bias type tape,
the recorded sound might not be erased prop-
erly.
Preventing Accidental Erasure
Cassette tapes have two erase-protection
tabs — one for each side. When a tab is in
place, you can record on that side.
To prevent accidental erasure of a tape re-
cording, use a screwdriver to remove one or
both of the cassette tape’s erase-protection
tabs. This prevents RECORD from being
pressed.
Erase-Protection Tab Sensor
5. Use a cotton swab dipped in tape head
cleaning solution or denatured alcohol to
gently clean the capstans, pinch roller,
tape guides, and tape heads.
If you later decide to record on a tape side af-
ter you have removed the erase-protection
tab, place a piece of strong plastic tape over
that side’s erase-protection hole. Be sure you
cover only the hole originally covered by the
erase-protection tab.
Capstan
Record/Playback
Head
Caution: Removing the erase-protection tabs
does not prevent a bulk eraser from erasing a
cassette tape.
Pinch
Roller
Erase
Head
Tape Guides
Cleaning the Tape-Handling Parts
6. Press STOP/EJECT and close the cas-
sette compartment door, then reinstall the
batteries or reconnect the power source.
Dirt, dust, or particles of the tape’s coating can
accumulate on the tape heads and other parts
that the tape touches. This can greatly reduce
the performance of the cassette player. After
every 20 hours of tape player operation, follow
these steps to clean the tape-handling parts
or use a RadioShack cassette deck cleaning
kit.
1. Remove the batteries and disconnect any
other power source.
2. Set FUNCTION to TAPE.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Modifying or tampering with the cassette re-
corder’s internal components can cause a
malfunction and might invalidate its warranty
and void your FCC authorization to operate it.
If your cassette recorder is not performing as
it should, take it to your local RadioShack
store for assistance.
CARE
Keep the cassette recorder dry; if it gets wet,
wipe it dry immediately. Use and store the
cassette recorder only in normal temperature
environments. Handle the cassette recorder
carefully; do not drop it. Keep the cassette re-
corder away from dust and dirt, and wipe it
with a damp cloth occasionally to keep it look-
ing new.
SPECIFICATIONS
Radio
Frequency Range ................................................................................. FM: 88–108 MHz; AM: 530–1710 kHz
Antenna ........................................................................................ FM: Telescoping Antenna; AM: Ferrite Rod
Cassette Player
Track System ............................................................................................................................. 4 Track Stereo
Tape Speed ........................................................................................................................................... 17/8 ips
Recording System ....................................................................................................... AC Bias, Magnet Erase
Frequency Response (Record/Play) at ±6 dB ......................................................................... 200 Hz–6.3 kHz
Wow and Flutter ...................................................................................................................... 0.35% (WRMS)
General
Power Requirements ........................................................................... 120V AC, 60 Hz DC 9V (6 C Batteries)
Output Power ......................................................................................................................... 1W per Channel
Power Consumption .................................................................................................................................. 12W
Dimensions (HWD) ............................................................................... 6 × 15 × 47/8 in (151 × 380 × 123 mm)
Weight (without batteries)........................................................................................................ 4 lb 3 oz (1.9 kg)
Specifications are typical; individual units might vary. Specifications are subject to change and improvement
without notice.
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-owned
stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT
AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAM-
AGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY
DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF
RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless other-
wise provided by law: (a) correct the defect by product repair without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced
parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or
replaced parts and products are warranted for the remainder of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or main-
tenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as fuses or batteries;
(d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
We Service What We Sell
12/99
14-732
09A00
RadioShack Corporation
Fort Worth, Texas 76102
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|