OPERATOR’S MANUAL
Random Orbit Sander
R2600
®
Variable Speed
This new random orbit sander has been engineered and manufactured to our high standard for dependability, ease of
operation and operator safety. When properly cared for, the random orbit sander will give you years of rugged, trouble-free
performance.
WARNING
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
Thank you for buying a RIDGID product.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SAFETY RULES
gloves away from moving parts. Loose clothes, jew-
elry, or long hair can be caught in moving parts.
WARNING:
Read and understand all instructions. Failure to
follow all instructions listed below, may result in elec-
tric shock, fire and/or serious personal injury.
■ Avoid accidental starting. Be sure switch is off be-
fore plugging in. Carrying tools with your finger on the
switch or plugging in tools that have the switch on, invites
accidents.
SAVE THESE INSTRUCTIONS
Work Area
■ Remove adjusting keys or wrenches before turning
the tool on. A wrench or a key that is left attached to a
rotating part of the tool may result in personal injury.
■ Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
■ Do not overreach. Keep proper footing and balance
at all times. Proper footing and balance enables better
control of the tool in unexpected situations.
■ Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. Power tools may create sparks which may ignite
the dust or fumes.
■ Use safety equipment. Always wear eye protection.
Dust mask, nonskid safety shoes, hard hat, or hearing
protection must be used for appropriate conditions.
■ Keep bystanders, children, and visitors away while
operating a power tool. Distractions can cause you to
lose control.
■ Do not use on a ladder or unstable support.
■ Loose clothes, jewelry, or long hair can be drawn into
air vents.
Electrical Safety
Tool Use and Care
■ Double insulated tools are equipped with a polarized
plug (one blade is wider than the other). This plug
will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to in-
stall a polarized outlet. Do not change the plug in any
■ Use clamps or other practical way to secure and sup-
port the workpiece to a stable platform. Holding the
work by hand or against your body is unstable and may
lead to loss of control.
■ Do not force tool. Use the correct tool for your appli-
cation. The correct tool will do the job better and safer at
the rate for which it is designed.
way. Double insulation
three-wire grounded power cord and grounded power
supply system.
eliminates the need for the
■ Do not use tool if switch does not turn it on or off.
Any tool that cannot be controlled with the switch is dan-
gerous and must be repaired.
■ Avoid body contact with grounded surfaces, such as
pipes, radiators, ranges, and refrigerators. There is
an increased risk of electric shock if your body is grounded.
■ Disconnect the plug from power source before mak-
ing any adjustments, changing accessories, or stor-
ing the tool. Such preventive safety measures reduce
the risk of starting the tool accidentally.
■ Don’t expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of elec-
tric shock.
■ Store idle tools out of the reach of children and other
untrained persons. Tools are dangerous in the hands of
untrained users.
■ Do not abuse the cord. Never use the cord to carry
the tools or pull the plug from an outlet. Keep cord
away from heat, oil, sharp edges, or moving parts.
Replace damaged cords immediately. Damaged cords
increase the risk of electric shock.
■ Maintain tools with care. Keep cutting tools sharp and
clean. Properly maintained tools with sharp cutting edges
are less likely to bind and are easier to control.
■ When operating a power tool outside, use an outdoor
extension cord marked “W-A” or “W”. These cords are
rated for outdoor use and reduce the risk of electric shock.
■ Check for misalignment or binding of moving parts,
breakage of parts, and any other condition that may
affect the tool’s operation. If damaged, have the tool
serviced before using. Many accidents are caused by
poorly maintained tools.
Personal Safety
■ Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not use
tool while tired or under the influence of drugs, alco-
hol, or medication. A moment of inattention while oper-
ating power tools may result in serious personal injury.
■ Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be
suitable for one tool, may become hazardous when used
on another tool.
■ Dress properly. Do not wear loose clothing or jew-
elry. Contain long hair. Keep your hair, clothing, and
3
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SAFETY RULES
■ When servicing a tool, use only identical replace-
ment parts. Follow instructions in the Maintenance
section of this manual. Use of unauthorized parts or
failure to follow Maintenance Instructions may create a
risk of electric shock or injury.
Service
■ Tool service must be performed only by qualified
repair personnel. Service or maintenance performed
by unqualified personnel could result in a risk of injury.
SPECIFIC SAFETY RULES
ꢀ Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact
hidden wiring or its cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the
operator.
Additional Safety Rules
■ Know your power tool. Read operator’s manual
carefully. Learn its applications and limitations, as
well as the specific potential hazards related to this
tool. Following this rule will reduce the risk of electric
shock, fire, or serious injury.
smaller the gage number, the heavier the cord. An
undersized cord will cause a drop in line voltage
resulting in loss of power and overheating.
■ Inspect for and remove all nails from lumber before
using this tool. Following this rule will reduce the risk
of serious personal injury.
■ Always wear safety glasses. Everyday eyeglasses
have only impact-resistant lenses; they are NOT
safety glasses. Following this rule will reduce the risk
of serious personal injury.
■ Drugs, alcohol, medication. Do not operate tool
while under the influence of drugs, alcohol, or any
medication. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
■ Protect your lungs. Wear a face or dust mask if the
operation is dusty. Following this rule will reduce the
risk of serious personal injury.
■ Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions
also.
■ Protect your hearing. Wear hearing protection
during extended periods of operation. Following this
rule will reduce the risk of serious personal injury.
■ Inspect tool cords periodically and, if damaged,
have repaired at your nearest Authorized Service
Center. Constantly stay aware of cord location.
Following this rule will reduce the risk of electric shock
or fire.
WARNING:
Some dust created by power sanding, sawing, grind-
ing, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these
chemicals are:
■ Check damaged parts. Before further use of the
tool, a guard or other part that is damaged should
be carefully checked to determine that it will oper-
ate properly and perform its intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation. A
guard or other part that is damaged should be
properly repaired or replaced by an authorized
service center. Following this rule will reduce the risk
of shock, fire, or serious injury.
• lead from lead-based paints,
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equip-
ment, such as those dust masks that are specially
designed to filter out microscopic particles.
■ Do not abuse cord. Never carry the tool by the cord
or yank it to disconnect it from the receptacle. Keep
cord away from heat, oil, and sharp edges. Following
this rule will reduce the risk of electric shock or fire.
■ Make sure your extension cord is in good condi-
tion. When using an extension cord, be sure to use
one heavy enough to carry the current your product
will draw. A wire gage size (A.W.G.) of at least 16 is
recommended for an extension cord 50 feet or less
in length. A cord exceeding 100 feet is not recom-
mended. If in doubt, use the next heavier gage. The
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the ool better and safer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
Current
A
Hz
W
Amperes
Hertz
Frequency (cycles per second)
Power
Watt
min
Minutes
Time
Alternating Current
No Load Speed
Class II Construction
Per Minute
Safety Alert
Type of current
n
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, suface speed, orbits etc., per minute
Precautions that involve your safety
0
.../min
Always wear safety gogles or safety glasses with side shields
and a full face shield when operating this product.
Eye Protection
Wet Conditions Alert
Do not expose to rain or use in damp locations.
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations
with them, deserve your careful attention and understanding. The safety warnings do not by themselves eliminate any
danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or
moderate injury. It may also be used to alert against unsafe practices that may cause property damage.
Important: Advises you of important information or instructions vital to the operation or maintenance of
the equipment.
Note: Advises you of additional information concerning the operation or maintenance of the equip-
ment.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Sanding Disc Diameter .................................................................................................................................... 5 in. (12.7 cm)
Orbit Diameter ............................................................................................................................................. 3/32 in. (0.24 cm)
No Load Speed ......................................................................................................................................... 7,000 - 12,000/min
Input .................................................................................................................................. 120 Volts, 60 Hz, AC only, 3 Amps
Net Weight ...................................................................................................................................................... 3.0 lbs. (1.4 kg)
ELECTRICAL
Double Insulation
Extension Cords
Double insulation is a concept in safety in electric power
tools, which eliminates the need for the usual three-wire
grounded power cord. All exposed metal parts are isolated
from the internal metal motor components with protecting
insulation. Double insulated tools do not need to be
grounded.
When using a power tool at a considerable distance from a
power source, be sure to use an extension cord that has
the capacity to handle the current the tool will draw. An
undersized cord will cause a drop in line voltage, resulting
in overheating and loss of power. Use the chart to deter-
mine the minimum wire size required in an extension cord.
Only round jacketed cords listed by Underwriter’s Labora-
tories (UL) should be used.
WARNING:
The double insulated system is intended to protect
the user from shock resulting from a break in the
tool’s internal wiring. Observe all normal safety pre-
cautions to avoid electrical shock.
When working outdoors with a tool, use an extension cord
that is designed for outside use. This type of cord is
designated with “WA” on the cord’s jacket.
Before using any extension cord, inspect it for loose or
exposed wires and cut or worn insulation.
Important: Servicing of a tool with double insulation
requires extreme care and knowledge of the system and
should be performed only by a qualified service technician.
For service, we suggest you return the tool to your nearest
authorized service center for repair. Always use original
factory replacement parts when servicing.
**Ampere rating (on tool faceplate)
0-2.0
2.1-3.4
3.5-5.0
5.1-7.0 7.1-12.0 12.1-16.0
Cord Length
Wire Size (A.W.G.)
25'
50'
16
16
16
16
16
16
16
16
14
16
14
12
14
14
10
14
12
—
Electrical Connection
The random orbit sander has a precision-built electric
motor. It should be connected to a power supply that is
120 volts, 60 Hz, AC only (normal household current). Do
not operate this tool on direct current (DC). A substantial
voltage drop will cause a loss of power and the motor will
overheat. If your tool does not operate when plugged into
an outlet, double-check the power supply.
100'
**Used on 12 gauge - 20 amp circuit.
CAUTION:
Keep the extension cord clear of the working area.
Position the cord so that it will not get caught on
lumber, tools or other obstructions while you are
working with a power tool. Failure to do so can re-
sult in serious personal injury.
WARNING:
Check extension cords before each use. If damaged
replace immediately. Never use tool with a damaged
cord since touching the damaged area could cause
electrical shock resulting in serious injury.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
UNPACKING
Instructions
When unpacking the random orbit sander:
WARNING:
If any parts are missing do not operate the tool until
the missing parts are replaced. Failure to do so could
result in possible serious personal injury.
■ Carefully remove the tool and accessories from the box.
■ Make sure that all items listed in the packing list are
included.
■ Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
WARNING:
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
The random orbit sander should never be connected
to a power supply when you are assembling parts,
making adjustments, cleaning, performing mainte-
nance, or when the tool is not in use. Disconnecting
the tool will prevent accidental starting that could
cause injury.
■ If any parts are damaged or missing, please call 1-866-
539-1710 for assistance.
Packing List
1/4 Sheet Orbital Sander
PSA (Pressure Sensitive Adhesive) Pad
80-Grit Sandpaper (2 sheets)
Operator’s Manual
APPLICATIONS
You may use the random orbit sander for the purposes listed below:
■ Sanding wood or wood product surfaces
■ Sanding steel surfaces
■ Removing rust from steel surfaces
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
Before using the random orbit sander, familiarize yourself
with all operating features and safety requirements.
However, do not let familiarity with the tool make you
careless.
Integrated Brake Pad
The integrated brake pad prevents pad “overspin,” which
helps eliminate sanding scratches when you apply the
sander to, or remove it from, a work surface.
Dust Bag
WARNING:
Exercise caution when using the random orbit
sander. Careless actions, for even a fraction of a
second, can result in serious personal injury.
The dust bag attaches to the sander and keeps dust to a
minimum.
Vacuum Adaptor
The built-in vacuum adaptor allows you to connect to a
1-1/4 in. or 2-1/2 in. diameter vacuum hose to help keep
the work area clean.
Your new random orbit sander is equipped with the follow-
ing features. See Figure 1.
Ergonomic Design
Switch
The sander has a conveniently-located ON/OFF switch.
The design of the random orbit sander provides for easy
handling. It is designed for comfort and ease of grasp
when operating in different positions and at different
angles.
Variable Speed
The variable speed feature allows you to operate the
sander at different speeds.
Power Cord
The 12-foot cord has a built-in cord wrap.
Backing Pad
Lighted Plug
The lighted plug helps to easily identify live tools.
The Micro-Fiber™ hook and loop pad accepts standard
hook and loop sanding discs. The supplied PSA pad
accepts pressure sensitive adhesive sanding discs.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
VARIABLE SPEED
DIAL
ERGONOMIC
HANDLE
AIR VENT
ON/OFF
SWITCH
DUST BAG
BACKING PAD
Fig. 1
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
WARNING:
The sander should never be connected to a power
supply when you are assembling parts, making ad-
justments, cleaning, performing maintenance, or
when the tool is not in use. Disconnecting the tool
will prevent accidental starting that could cause se-
rious injury.
Sanding Disc Selection
Selecting the correct size grit and type sanding disc is an
extremely important step in achieving a high quality
sanded finish. Aluminum oxide, silicon carbide, and other
synthetic abrasives are best for power sanding. Natural
abrasives, such as flint and garnet are too soft for eco-
nomical use in power sanding.
In general, coarse grit will remove the most material and
finer grit will produce the best finish in all sanding opera-
tions. The condition of the surface to be sanded will
determine which grit will do the job. If the surface is rough,
start with a coarse grit and sand until the surface is
uniform. Medium grit may then be used to remove
scratches left by the coarser grit and finer grit used for
finishing of the surface. Always continue sanding with each
grit until surface is uniform.
Fig. 2
Attaching Hook and Loop Sanding Discs
See Figure 2.
1. Unplug the sander.
2. Align holes in hook and loop type sanding disc with
holes in pad, then carefully press fuzzy side of sanding
disc against pad as tightly as possible.
Note: Hook and loop type sanding discs can be reused
for the life of the sanding abrasive. It is recommended
that you keep the sanding disc backing pad clean to
provide for best adhesion. Clean occasionally by
brushing lightly with a small brush.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Replacing the Pressure Sensitive Adhesive
(PSA) Sanding Pad and Disc Attachment
See Figure 3.
The sander comes assembled with the Micro-Fiber™ hook
and loop pad. To attach the pressure sensitive adhesive
(PSA) pad, you must first remove the hook and loop pad.
Inspect sanding disc before installing. Do not use if broken
or defective.
1. Unplug your sander.
2. Remove the four screws that hold the hook and loop
pad in place.
3. Remove the hook and loop pad.
4. Clean dust particles from the pad brake.
5. Apply a thin layer of lightweight grease to the back of
the pad.
6. Align the holes in the pressure sensitive adhesive
(PSA) pad with the four screw holes in the sander.
7. Replace the four screws securely.
8. Carefully peel paper backing from the pressure sensi-
tive adhesive type sanding disc.
Fig. 3
9. Align holes in sanding disc with holes in backing pad,
then carefully press sticky side of disc against pad as
tightly as possible.
Note: Holes in sanding disc must line up with holes in
the backing pad in order for the dustless feature of your
sander to function properly.
Note: It is recommended that you clean backing pad
occasionally by brushing lightly with a small brush. Dust
buildup on backing pad could cause sanding disc not to
stick properly.
Remove PSA Sanding Disc Before Storage
Do not store your sander with the sanding disc installed.
Heat generated from sanding causes the pressure sensi-
tive adhesive to flow and form a tight bond between the
backing pad and sanding disc.
Removing the sanding disc soon after you have finished a
sanding operation avoids letting the adhesive set up. If the
sanding disc is left on the backing pad for an extended
period of time after use, the adhesive will set up and cause
the sanding disc to become difficult to remove.
It may also tear when removing. When this situation
occurs, it becomes difficult to clean the backing pad for the
next sanding disc.
Note: If you forget to remove the sanding disc after a
sanding operation, sand for a few minutes to soften the
adhesive backing before attempting to remove sanding
disc.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
WARNING:
The sander should never be connected to a power
supply when you are assembling parts, making ad-
justments, cleaning, performing maintenance, or
when the tool is not in use. Disconnecting the tool
will prevent accidental starting that could cause se-
rious injury.
Attaching the Dust Bag
See Figure 4.
The dust bag provides a dust collection system for the
sander. Sanding dust is drawn up through the holes of the
sanding disc and collected in the dust bag during sanding.
Follow these steps to attach the dust bag.
1. Unplug the sander.
Fig. 4
2. Using a slight twisting motion as shown in figure 4,
firmly slide dust bag assembly in blower exhaust on
sander.
Attaching the Sander to a Vacuum
See Figure 5.
You can easily attach the dust collection system of your
sander to a vacuum.
1. Unplug the sander.
2. Remove the dust bag from the sander.
3. Attach vacuum hose to blower exhaust as shown in
figure 5.
Note: Vacuum hose fits inside blower exhaust.
4. Connect sander and vacuum to power supply.
WARNING:
Fig. 5
When sander is not connected to vacuum, always
reinstall dust bag assembly back onto sander. Fail-
ure to do so could cause sanding dust or foreign
objects to be thrown into your face or eyes which
could result in possible serious injury.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
WARNING:
TO TURN OFF
Always wear safety goggles or safety glasses with
side shields when operating this tool. Failure to do
so could result in dust, shavings, or loose particles
being thrown into your eyes, resulting in possible
serious injury.
Turning the Sander On/Off
See Figure 6.
Follow these steps to turn the sander ON/OFF.
■ Turn on the sander: Push the ON/OFF switch to the left.
■ Turn off the sander: Push the ON/OFF switch to the
right.
Operating the Sander
See Figure 7.
TO TURN ON
Fig. 6
Follow these steps to operate the sander.
1. Secure the workpiece to prevent it from moving under
the sander.
WARNING:
Unsecured workpieces could be thrown towards the
operator causing injury.
WARNING:
Keep your head away from the sander and the sand-
ing area. Your hair could be drawn into the sander
causing serious injury.
2. Place the sander on the workpiece so that all of the
sanding disc surface is in contact with the workpiece.
CAUTION:
Be careful not to let your hand cover the air vents.
Fig. 7
3. Turn on the sander and move it slowly over the
workpiece.
4. Make successive passes in parallel lines, circles, or
crosswise movements.
5. Turn off the sander and wait until the sanding disc
comes to a complete stop before removing it from the
workpiece.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
Do not force. The weight of the unit supplies adequate
pressure, so let the sanding disc and sander do the work.
Applying additional pressure only slows the motor, rapidly
wears sanding disc and greatly reduces sander speed.
Excessive pressure will overload the motor causing
possible damage from motor overheating and can result in
inferior work. Any finish or resin on wood may soften from
the frictional heat. Do not allow sanding on one spot too
long as the sander’s rapid action may remove too much
material, making the surface uneven.
Extended periods of sanding may tend to overheat the
motor. If this occurs, turn sander off and wait until sanding
disc comes to a complete stop, then remove it from
workpiece. Remove your hand from vent area, remove
sanding disc, then with your hand removed from vent
area, turn sander on and run it free without a load to cool
motor.
Fig. 8
Emptying the Dust Bag
See Figure 8.
For more efficient operation, empty the dust bag when it is
no more than half full. This will permit the air to flow
through the bag better. Always empty and clean the dust
bag thoroughly upon completion of a sanding operation
and before placing the sander in storage.
WARNING:
Collected sanding dust from sanding surface coat-
ings such as polyurethanes, linseed oil, etc. can self-
ignite in your sander dust bag or elsewhere and
cause fire. To reduce the risk of fire always empty
your dust bag frequently (10-15 minutes) while sand-
ing and never store or leave a sander without totally
emptying its dust bag. Also follow the recommenda-
tions of the coatings manufacturers.
Fig. 9
Follow these steps to empty the dust bag.
1. Unplug the sander.
WARNING:
Failure to unplug the tool could result in accidental
starting causing possible serious injury.
2. Remove the dust bag from the sander.
3. Shake out the dust.
4. Reattach the dust bag to the sander.
For a more thorough cleaning of the dust bag, remove
dust bag from frame, as shown in figure 9, and shake out
dust. Replace dust bag over frame then install dust bag
assembly on sander.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENTS
Variable Speed Switch
See Figure 10.
The variable speed feature allows your sander to operate
at speeds that can be adjusted by rotating the dial on the
variable speed switch from A to F. The dial is conveniently
located on the motor housing, allowing operator control of
disc speed. To increase sanding disc speed, turn the dial
on the variable speed switch to a higher setting. Turn dial
to a lower setting to decrease sanding disc speed.
Fig. 10
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
WARNING:
When servicing use only identical RIDGID® replace-
ment parts. Use of any other parts may create a
hazard or cause product damage.
Brush Replacement
See Figure 11.
1. Unplug your sander.
WARNING:
Failure to unplug the tool could result in accidental
starting causing possible serious injury.
WARNING:
The random orbit sander should never be connected
to a power supply when you are assembling parts,
making adjustments, cleaning, performing mainte-
nance, or when the tool is not in use. Disconnecting
the tool will prevent accidental starting that could
cause serious injury.
SCREWS
TOP
COVER
BRUSH
ASSEMBLY
General
CLAMP
SCREWS
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, carbon dust, etc.
BRUSH TUBE
CLAMPS
RED
LEAD
BLACK
LEAD
WARNING:
Do not at any time let brake fluids, gasoline, petro-
leum-based products, penetrating oils, etc. come in
contact with plastic parts. They contain chemicals
that can damage, weaken, or destroy plastic.
BRUSH
ASSEMBLY
Electric tools used on fiberglass material, wallboard,
spackling compounds, or plaster are subject to accelerated
wear and possible premature failure because the fiber-
glass chips and grindings are highly abrasive to bearings,
brushes, commutators, etc. Consequently, we do not
recommended using this tool for extended work on these
types of materials. However, if you do work with any of
these materials, it is extremely important to clean the tool
using compressed air.
Fig. 11
2. Remove screws (3) from top cover of sander.
3. Remove top cover.
4. Remove clamp screws (2).
WARNING:
5. Remove brush tube clamps (2).
Always wear safety goggles or safety glasses with
side shields during power tool operation or when
blowing dust. If operation is dusty, also wear a dust
mask.
6. Disconnect red and black lead terminals from brush
tubes.
7. Remove brush assemblies (2).
8. Check for wear. Replace both brush assemblies when
either has less than 1/4 in. length of carbon remaining.
Do not replace one side without replacing the other.
Bearing Lubrication
All of the bearings in this tool are lubricated with a suffi-
cient amount of high grade lubricant for the life of the tool
under normal operating conditions. Therefore, no further
lubrication is required.
9. Reassemble using new brush assemblies. Make sure
curvature of brush matches curvature of motor and that
brush moves freely in brush tube.
10.Reassemble by reversing the steps listed above.
11.Tighten all screws securely. Do not over tighten.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
17
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
18
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
RIDGID® HAND HELD AND STATIONARY POWER TOOL
LIMITED THREE YEAR WARRANTY
AND 90-DAY SATISFACTION GUARANTEE POLICY
This product is manufactured under license from Ridgid, Inc.
WHAT IS NOT COVERED
byOneWorldTechnologies,Inc.Allwarrantycommunications
should be directed to One World Technologies, Inc. at (toll-
free) 1-866-539-1710.
This warranty applies only to the original purchaser at retail
and may not be transferred. This warranty only covers
defects arising under normal usage and does not cover any
malfunction, failure or defect resulting from misuse, abuse,
neglect, alteration, modification or repair by other than an
authorized RIDGID service center for hand held and
stationary power tools. One World Technologies, Inc. makes
no warranties, representations or promises as to the quality
or performance of its power tools other than those specifically
stated in this warranty.
90-DAY SATISFACTION GUARANTEE POLICY
During the first 90 days after the date of purchase, if you are
dissatisfied with the performance of this RIDGID tool for any
reason you may return the tool to the dealer from which it
was purchased for a full refund or exchange. To receive a
replacement tool you must present proof of purchase and
return all original equipment packaged with the original
product. The replacement tool will be covered by the limited
warranty for the balance of the three year warranty period.
ADDITIONAL LIMITATIONS
To the extent permitted by applicable law, all implied
warranties, including warranties of MERCHANTABILITY or
FITNESS FORAPARTICULAR PURPOSE, are disclaimed.
Any implied warranties, including warranties of
merchantability or fitness for a particular purpose, that
cannot be disclaimed under state law are limited to three
years from the date of purchase. One World Technologies,
Inc. is not responsible for direct, indirect, incidental or
consequential damages. Some states do not allow limitations
on how long an implied warranty lasts and/or do not allow
the exclusion or limitation of incidental or consequential
damages, so the above limitations may not apply to you.
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
WHAT IS COVERED UNDER THE LIMITED
THREE YEAR WARRANTY
This warranty covers all defects in workmanship or materials
in this RIDGID tool for the three year period from the date of
purchase. This warranty is specific to this tool. Warranties
for other RIDGID products may vary.
HOW TO OBTAIN SERVICE
To obtain service for this RIDGID tool, you must return it,
freight prepaid, to an authorized RIDGID service center for
hand held and stationary power tools. You may obtain the
location of the authorized service center nearest you by
calling (toll-free) 1-866-539-1710 or by logging on to the
requesting warranty service, you must present the proof of
purchase documentation, which includes a date of purchase.
The authorized service center will repair any faulty
workmanship, and either repair or replace any defective part,
at our option at no charge to you.
One World Technologies, Inc.
Hwy. 8
Pickens, SC 29671
19
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATOR’S MANUAL
Random Orbit Sander
R2600
®
Variable Speed
Customer Service Information:
For parts or service, contact your nearest RIDGID authorized service center. Be sure to provide all relevant information when
you call or visit. For the location of the authorized service center nearest you, please call 1-866-539-1710 or visit us online at
The model number of this tool is found on a plate attached to the motor housing. Please record the serial number in the space
provided below. When ordering repair parts, always give the following information:
R2600
Model No.
Serial No.
983000-274
4-03
Download from Www.Somanuals.com. All Manuals Search And Download.
|