VR6 0 2 HF
USER’S
GUIDE
VIDEO CASSETTE RECO RDER
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Table of Contents
Commercial Scan (SEARCH Button)_ 17
Slow Motion______________________ 17
Pause for Stop-Action______________ 18
Frame Advance ___________________ 18
Automatic Tracking _______________ 18
Manual Tracking__________________ 18
PLAYBACK: HI-FI/ M I X /LINEAR
Important Information
Warnings______________________________ i
Cautions ______________________________ i
Note to Cable TV Installer _______________ i
Product Registration ____________________ i
Hooking Up the VCR
Feature________________________ 19
Choosing a Hookup ____________________ 2
Antenna or Cable System Without a
Cable Box _________________________ 3
Cable System With Cable Box to
Recording a Program
Types of Recordings ___________________ 20
Recording Speeds _____________________ 20
Recording Pause ______________________ 20
Basic Recording –
Unscramble All Channels ___________ 4
Cable System With Cable Box to
Unscramble Only Pay Channels______ 5
Connecting Two VCRs for Copying Tapes_ 6
Connecting a Stereo Amplifier/ Receiver __ 7
Operating Instructions _____________ 20
Watch a TV Channel While VCR
is Recording a Different Channel _____ 20
Express Recording ____________________ 21
Recording Stereo Broadcast TV or SAP___ 22
Recording Audio Only_________________ 23
Recording While You're Away
Setting Up the VCR
Startup
Check Accessories With VCR ________ 8
Insert Batteries in Remote ___________ 8
Turn on TV and VCR _______________ 8
Place Channels in VCR's Memory ____ 9
Add or Remove Channels from
Setting a Timer Recording __________ 24
Stopping a Timer Recording ________ 24
Select Cable Box Viewing Channel __ 25
Timer Recording From the
VCR's Memory __________________ 9
Use TV• VCR Button ______________ 10
Set the AUTO TV/VCR Feature ______ 10
Set the Time and Date _____________ 11
Select the Language/
VCR’s Line Input _______________ 25
Checking or Clearing
Timer Recordings_______________ 25
Using Two VCRs for Copying
and Editing Tapes __________________ 26
Copying and Editing Tapes Using
Sélectionner la langue ___________ 11
Compatible Remote ________________ 26
Using the Remote Control
VCR Function Buttons ______________ 12-13
References
Specifications _________________________ 27
Cleaning the VCR _____________________ 27
Location of Controls
Playing a Tape
Operating Instructions _________________ 14
Using the Playback Features
Front Panel_______________________ 28
Back Panel _______________________ 29
Display Panel_____________________ 29
Trouble Checks ____________________ 30-31
Limited Warranty _____________________ 32
Index ________________________________ 33
Auto Play Feature _________________ 15
Picture Search ____________________ 15
DISPLAY Button __________________ 16
Time Counter_____________________ 16
Zero Search ______________________ 17
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Choosing a Hookup
The hookups on pages 3 through 5 are divided into two hookup types:
Basic (A) and Advanced (B).
The basic hookup shows the backs of TVs that have only an antenna/ cable
connection. It is the easier of the two and additional accessories may not be
needed.
The advanced hookup shows the VCR hooked up to a monitor/ receiver
(TV with audio and video jacks). This connection may improve the picture
quality as well as convenience of operation.
Answer the questions to choose the hookup for your VCR.
1. How do you receive your TV signals?
Choose one answer from below.
A. Outside antenna – Turn to page 3.
B. Rabbit ears (set-top) and/ or bow tie antenna – Turn to page 3.
C. Cable System – Go to question 2.
2. What type of Cable-TV system* do you have?
Choose one answer from below.
A. Cable without a box – Turn to page 3.
B. Cable box to unscramble all the channels – Turn to page 4.
C. Cable box to unscramble only pay channels, such as HBO, Showtime,
Cinemax, etc. – Turn to page 5.
*You may need to contact your local cable company for assistance.
Optional Hookups
How to hook up two VCRs for copying tapes.
A. Select a hookup by answering questions 1 and 2 above.
B. Then, modify the connections as shown on page 6.
How to hook up a stereo amplifier/receiver.
A. Select a hookup by answering questions 1 and 2 above.
B. Then, modify the connections as shown on page 7.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Antenna or Cable System Without a Cable Box
A. Basic hookup.
A
Use this hookup for a simple connection
which requires fewer accessories.
From Antenna
or Cable
300/75 Ohm
Adapter
1. Set the 3CH.4 switch on back of VCR to
Back of VCR
either channel 3 or 4.
Tune the TV to this channel and use the
R
AUDIO1
L
IN FROM
ANT.
TV•VCR button to watch the VCR.
OR
VHF/UHF
OUT TO TV
2. Connect as shown.
OUT
IN
3 CH. 4
VIDEO1
This connection may require additional
accessories not provided.
3. Plug in power cords of VCR and TV.
RF Coaxial Cable
(supplied)
Continue to page 8.
4.
75 to 75/300 Ohm
Separator
VHF
UHF
OR
Cable/
Antenna
Back of TV
B. Advanced hookup.
B
Use this hookup for slightly improved
picture quality, Hi-Fi Stereo playback, and
more convenient operation — use of the
TV•VCR button is not required.
From Antenna
or Cable
300/75 Ohm
Adapter
1. Connect as shown.
OR
Back of VCR
This connection requires additional accessories
not provided.
R
AUDIO1
L
IN FROM
ANT.
If your TV is not stereo, a Y-adapter may be
required to hear sound from both channels.
VHF/UHF
OUT TO TV
OUT
N
3 CH. 4
VIDEO1
2. Plug in power cords of VCR and TV.
Continue to page 8.
3.
Audio/Video Cables
VIDEO
INPUT
Tune the TV to its video input to watch the
VCR. Set the Auto TV/ VCR feature to OFF. See
page 10 for details.
RF Coaxial Cable
(supplied)
RIGHT
OUT AUDIO
IN
S-VIDEO
CABLE /
ANTENNA
L /
MONO
Back of TV
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Cable System With Cable Box to Unscramble All Channels
A. Basic hookup.
A
Use this hookup for a simple connection
which requires fewer accessories.
From Cable
1. Set the 3CH.4 switch on back of VCR to
Back of VCR
either channel 3 or 4.
RF Coaxial
Cable
Cable Box
R
AUDIO1
L
Tune the TV to this channel and use the
IN FROM
ANT.
IN
OUT
TV•VCR button to watch the VCR.
VHF/UHF
OUT TO TV
OUT
IN
2. Connect as shown.
3 CH. 4
VIDEO1
This connection may require additional
accessories not provided.
3. Plug in power cords of VCR, TV, and
RF Coaxial Cable
(supplied)
cable box.
Continue to page 8.
4.
75 to 75/300 Ohm
Separator
VHF
UHF
OR
Cable/
Antenna
Back of TV
B. Advanced hookup.
B
Use this hookup for slightly improved
picture quality, Hi-Fi Stereo playback, and
more convenient operation — use of the
TV•VCR button is not required.
1. Connect as shown.
Cable Box
This connection requires additional accessories
not provided.
From Cable
IN
OUT
If your TV is not stereo, a Y-adapter may be
required to hear sound from both channels.
Back of VCR
RF Coaxial
Cable
R
AUDIO1
L
IN FROM
ANT.
2. Plug in power cords of VCR, TV, and
VHF/UHF
OUT TO TV
cable box.
OUT
N
3 CH. 4
VIDEO1
Continue to page 8.
3.
Audio/Video Cables
VIDEO
INPUT
Tune the TV to its video input to watch the
VCR. Set the Auto TV/ VCR feature to OFF. See
page 10 for details.
RF Coaxial Cable
(supplied)
RIGHT
OUT AUDIO
S-VIDEO
IN
CABLE /
ANTENNA
L /
MONO
Back of TV
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Cable System With Cable Box to Unscramble Only Pay Channels
(such as HBO, Showtime, Pay-Per-View, etc.)
A. Basic hookup.
A
Use this hookup for a simple connection
which requires fewer accessories.
From Cable
1. Set the 3CH.4 switch on back of VCR to
Back of VCR
either channel 3 or 4.
RF Coaxial
Cable
Cable Box
R
AUDIO1
L
Tune the TV to this channel and use the
IN FROM
ANT.
IN
OUT
TV•VCR button to watch the VCR.
VHF/UHF
OUT TO TV
OUT
IN
2. Connect as shown.
3 CH. 4
VIDEO1
This connection may require additional
accessories not provided.
3. Plug in power cords of VCR, TV, and
RF Coaxial Cable
(supplied)
cable box.
Continue to page 8.
4.
75 to 75/300 Ohm
Separator
VHF
UHF
OR
Cable/
Antenna
Back of TV
B. Advanced hookup.
B
Cable Box
Use this hookup for slightly improved
picture quality, Hi-Fi Stereo playback, and
more convenient operation — use of the
TV•VCR button is not required.
From Cable
IN
OUT
Signal
Splitter
1. Connect as shown.
This connection requires additional accessories
not provided.
Back of VCR
If your TV is not stereo, a Y-adapter may be
required to hear sound from both channels.
R
AUDIO1
L
IN FROM
ANT.
VHF/UHF
2. Plug in power cords of VCR, TV, and
OUT TO TV
OUT
IN
cable box.
3 CH. 4
VIDEO1
Continue to page 8.
3.
Audio/Video Cables
Tune the TV to its video input to watch the
VCR. View all pay channels through the VCR.
VIDEO
INPUT
RF Coaxial
Cable
(supplied)
RIGHT
OUT AUDIO
S-VIDEO
IN
CABLE /
ANTENNA
L /
MONO
Back of TV
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Connecting Two VCRs for Copying Tapes
A
Option A hookup.
Playback VCR
Use this hookup for a simple connection
which requires fewer accessories.
From Antenna, Cable
or Cable Box
R
AUDIO1
L
IN FROM
ANT.
1. Select a hookup from pages 2 through 5
VHF/UHF
and then modify with this connection.
OUT TO TV
OUT
IN
3 CH. 4
2. Set the 3CH.4 switch on the playback
VIDEO1
VCR to either channel 3 or 4.
Tune the recording VCR to this channel to
receive the signal from the playback VCR.
RF Coaxial Cable
(supplied)
Recording VCR
3. Connect as shown.
R
AUDIO1
L
This connection may require additional
accessories not provided.
IN FROM
ANT.
VHF/UHF
OUT TO TV
IN
4. Plug in power cords of VCRs and TV.
OUT
3 CH. 4
VIDEO1
Continue to page 8.
5.
RF Coaxial
Cable
Audio/Video
Cables
or
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
B
Option B hookup.
Playback VCR (only)
Use this hookup for slightly improved copy
quality and more convenient operation —
use of the TV•VCR button is not required.
R
IN FROM
ANT.
AUDIO1
L
1. Select a hookup from pages 2 through 5
VHF/UHF
OT TO TV
and then modify with this connection.
OUT
IN
3 H. 4
VIDEO1
2. Connect as shown.
This connection requires additional accessories
not provided.
Audio/Video
Cables
If your other VCR is not stereo, a Y-adapter
may be required to hear sound from both
channels.
Recording VCR
From Antenna, Cable
or Cable Box
R
IN FROM
ANT.
AUDIO1
L
3. Plug in power cords of VCRs and TV.
VHF/UHF
OUT TO TV
Continue to page 8.
4.
OUT
IN
3 CH. 4
VIDEO1
Select the line (audio/ video) input on the
recording VCR to receive the signal from the
playback VCR.
RF Coaxial Cable
(supplied)
Audio/Video
Cables
or
Caution: The unauthorized recording of
television programs and other materials
may infringe the rights of others.
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Connecting a Stereo Amplifier/Receiver
Record on the VCR from an
amplifier/receiver.
Back of VCR
Connect your VCR to a stereo amplifier/
receiver to record stereo audio.
R
IN FROM
ANT.
AUDIO1
1. Select a hookup from pages 2 through 5
L
VHF/UHF
and then modify with this connection.
OUT TO TV
OUT
IN
3 CH. 4
2. Connect as shown.
VIDEO1
This connection requires additional accessories
not provided.
Audio/Video Cables
3. Plug in power cords of amplifier/
receiver, VCR, and TV.
Back of
Amplifier/Receiver
4. See “Recording Audio Only” on page 23.
Select the line input on the VCR to receive the
audio signal from the amplifier/ receiver.
LEFT
RIGHT
REC
TAPE
PLAY
PHONO TUNER
AUX
Play back stereo tapes or
receive a stereo broadcast
through an amplifier/receiver.
Back of VCR
Connect your VCR to a stereo
amplifier/ receiver to receive stereo
broadcasts or play back stereo tapes.
R
AUDIO1
L
IN FROM
ANT.
1. Select a hookup from pages 2 through 5
VHF/UHF
and then modify with this connection.
OUT TO TV
OUT
IN
2. Connect as shown.
3 CH. 4
VIDEO1
This connection requires additional accessories
not provided.
Audio/Video Cables
3. Plug in power cords of amplifier/
receiver, VCR, and TV.
Back of
Amplifier/Receiver
4. See “Playback Operation” on page 14.
LEFT
RIGHT
REC
TAPE
PLAY
PHONO TUNER
AUX
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
1. Check accessories with VCR.
Contact your dealer if any items are missing.
POWER
PAUSE
TV•VCR PREV CH DISPLAY
PLAY
REC
2 “AA” Batteries
REW
FF
SLOW
STOP
3
SEARCH
CHAN
1
2
4
7
5
8
6
9
0
INPUT
MENU
CLEAR
SPEED
F. ADV
TRACKING
Remote
RF Coaxial Cable
(Stock No. 221346)
(Stock No. 221347)
2. Insert batteries in remote.
3. Turn on the TV.
A. Turn on the TV.
B. If you used one of the basic hookups, tune the TV to the channel selected with the
3CH.4 switch on back of VCR.
If you used one of the advanced hookups, tune the TV to the TV’s video input.
(See TV owner’s manual for details.)
4. Turn on the VCR.
A. Press POWER on the remote. The POWER and VCR indicators in the VCR’s display
panel light. The TIMER indicator flashes until the time is set.
continued on next page
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
5. Place channels in the VCR’s memory.
The first time you turn on the VCR or after a power
interruption, the VCR displays a message on the TV screen
prompting you to AUTO-SEARCH CHANNELS for the VCR.
If the message does not appear, go to step A below. If the
message appears, follow the directions on the screen.
AUTO-SEARCH CHANNELS
CONNECT ANTENNA CABLE...
THEN PRESS CH UP
Wait until the channel numbers stop changing. This takes
about one to two minutes. The TV tunes to the lowest
channel found. Then, pressing CHAN up or down selects only
the active channels.
If you ever need to manually set up channels (Channel
Setup) on the VCR because you change cable or antenna
signals:
VCR MAIN MENU
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
A. Press MENU to display the VCR MAIN MENU on the TV
screen. If this menu does not appear:
CHANNEL SETUP
• Make sure the TV is tuned to same channel as the
3CH.4 switch on the VCR or the TV’s video input
(refer to TV’s manual).
1 AUTO-SEARCH CHANNELS
2 ADD/REMOVE CHANNELS
3 TUNING MODE: CABLE
4 CABLE BOX SETUP
• If you use a basic hookup, check the VCR indicator in
display panel — it should be on. Press TV•VCR to
turn it on.
0 EXIT TO MAIN MENU
• Check the connections.
B. Press 3 to display the CHANNEL SETUP menu.
C. Press 1 to begin AUTO-SEARCH CHANNELS.
The VCR automatically selects CABLE (cable TV) or
ANTENNA. If you need to change the setting manually,
press 3.
6. Add or remove channels from the VCR’s memory.
VCR MAIN MENU
You may want to add or remove channels if some of the
channels are not active, have weak signals, or you do not
want to watch them.
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
It is best to place channels in memory using the AUTO-
SEARCH CHANNELS feature described above before you add
or remove channels since channels 2-13 are the only ones that
are preset at the factory.
CHANNEL SETUP
1 AUTO-SEARCH CHANNELS
2 ADD/REMOVE CHANNELS
A. Press MENU on the remote to see the VCR MAIN MENU
ADD/REMOVE CHANNEL
on the TV screen.
CH 03
B. Press 3 to display the CHANNEL SETUP menu.
C. Press 2 to display the ADD/REMOVE CHANNEL menu.
D. Follow the directions on the screen.
IS PRESENTLY ADDED
PRESS CLEAR TO REMOVE
PRESS MENU TO EXIT
E. Add or remove more channels by using the CHAN up
and down buttons.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
7.Use TV•VCR button.
Skip this step if you used one of the advanced hookups.
When using one of the basic hookups, the TV•VCR button lets
you switch between the picture coming from the VCR or
television channels. This button lets you record a program on
the VCR while watching another channel on the TV. Details
are on page 20.
A. Press TV•VCR to see the picture from the VCR.
The VCR indicator lights in the display panel.
B. Press CHAN up or down to change channels on
the VCR. The channel number changes on the TV screen.
C. Press TV•VCR to see the TV channels.
The VCR indicator does not light in the display panel.
Change channels using the TV’s remote.
D. Return the TV to the VCR viewing channel —
CH3 or CH4.
E. Press TV•VCR to switch back to the picture from
the VCR.
8.Set AUTO TV/VCR feature.
If you used one of the basic hookups, leave the Auto TV/ VCR
feature set to ON.
If you used the video input of your TV to connect the VCR,
you can prevent the VCR indicator from turning on
automatically.
A. Press MENU on remote to display VCR MAIN MENU.
B. Press 4 to display VCR SETUP OPTIONS.
C. Press 3 to select AUTO TV/VCR: ON or OFF.
VCR MAIN MENU
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
4 VCR SETUP OPTIONS
•
Select ON if you used one of the basic hookups and
watch your VCR on channel 3 or 4 of your TV. The
VCR will automatically switch the TV•VCR setting to
VCR every time you turn on the VCR, insert a tape with
its safety tab removed, or press PLAY.
SETUP OPTIONS
1 REMOTE CONTROL: VCR1
2 AUTO PLAY:
3 AUTO TV/VCR:
4 AUDIO SETUP
ON
ON
0 EXIT TO MAIN MENU
•
Select OFF if you used one of the advance hookups and
watch your VCR on the video input channel of your
TV. The VCR indicator will not turn on automatically
and the signal from your antenna or cable to your TV
will not be interrupted.
Pressing TV•VCR on the remote will turn the VCR
indicator on or off and switch the antenna signal.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
9. Set the time and date.
VCR MAIN MENU
A. Press MENU on remote to display the VCR MAIN MENU.
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
4 VCR SETUP OPTIONS
5 SET VCR CLOCK
B. Press 5 to display SET VCR CLOCK.
The TIMER indicator in the VCR’s display panel flashes if
the clock is not set.
C. Enter the time and date with the number buttons on the
SET VCR CLOCK
remote.
TIME --:--
(HH:MM)
• Press 0 before single-digit numbers.
DATE --/--/--
Example: press 0, then 5, then 0, then 7 for a time
of 5:07. Press 1 for AM or 2 for PM.
PRESS CLEAR TO CORRECT
PRESS MENU TO EXIT
• Press CLEAR on the remote to change incorrect entries.
D. Press MENU to start the clock and remove SET VCR
CLOCK menu from the screen.
10. Select the language/sélectionner la langue.
This feature lets you select English or French as the language
for your on-screen menus.
VCR MAIN MENU
A. Press MENU on remote to display the VCR MAIN MENU.
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
B. Press 6 to switch between English or French.
4 VCR SETUP OPTIONS
5 SET VCR CLOCK
6 LANGUAGE (LANGUE)
• Select LANGUAGE to have the menus displayed in
English.
• Select LANGUE to have the menus displayed in French.
MENU PRINCIPAL DU VCR
1 PROGRAMMATION
2 REVISER PROGRAMMES
3 CANAUX
4 OPTIONS REGLAGE VCR
5 REGLER L'HORLOGE
6 LANGUE (LANGUAGE)
0 TERMINER
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
VCR Function Buttons
CHAN (Channel Up or Down)
Selects next higher or lower channel in
the VCR’s channel memory.
CLEAR
POWER
Resets time counter to 0:00:00.
TV•VCR PREV CH DISPLAY
Lets you change entries when setting the
time or VCR for a timer recording.
PAUSE
PLAY
REC
DISPLAY
Shows VCR operating displays on the
TV screen.
REW
FF
Displays the time counter.
SLOW
STOP
3
SEARCH
CHAN
1
2
FF (Fast Forward)
Fast forwards the tape when the VCR is
stopped.
4
7
5
8
6
9
Searches the picture in forward motion
during playback.
0
F. ADV (Frame Advance)
CLEAR
INPUT
MENU
Lets you view one frame with each press
of the button when tape is in stop-action
pause.
SPEED
F. ADV
TRACKING
INPUT
Turns the line input on or off.
Line input refers to the signal coming
from the component connected to the
audio/ video jacks on the back of the
VCR.
MENU
Displays the VCR MAIN MENU on the
TV screen.
Removes a menu from the screen.
12
continued on next page
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
VCR Function Buttons
Numbers (0 through 9)
SEARCH
Select a channel up to 99 by pressing two
numbers.
Displays ZERO SEARCH menu on TV.
Advances tape 60 seconds during
playback.
Select a cable channel over 99 by
pressing and holding 1 until 1-- appears
on the screen. Then press the other two
numbers.
SLOW
Used for slow-motion playback.
PAUSE
Pauses action for viewing during
playback.
SPEED (Tape Speed)
Selects a recording speed
(SP, LP, SLP).
Pauses recording to prevent recording of
unwanted scenes.
STOP
PLAY
Stops the VCR’s normal functions such
as record, playback, rewind, fast
forward, and pause.
Plays a tape.
POWER
Turns VCR on and off.
TRACKING Up or Down
Lets you manually reduce the streaks
that may appear on the picture during
play or pause.
PREV CH (Previous Channel)
Switches between two channels.
Reduces picture “jitter” during stop-
action playback.
Select one channel and then select
another. Press PREV CH to switch
between the two channels.
TV•VCR
Switches the picture signal so that it
either comes from the VCR or the TV
channel. See page 10.
REC
Starts VCR recording.
Used for express recording.
See page 21.
REW (Rewind)
Rewinds the tape when the VCR is
stopped.
Searches the picture in reverse motion
during playback.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Operating Instructions
To play a tape
1. Turn on the TV and tune it to channel 3, 4, or the TV’s video input to see the
picture from the VCR.
2. Insert a tape in the VCR.
The VCR automatically turns on. The VCR indicator lights if the AUTO TV/VCR
feature is turned ON. The tape automatically begins playback if the safety tab
on the cassette has been removed and the AUTO PLAY feature is turned on.
POWER
Hi-Fi
VCR
TIMER
SAP
RECORD
PAUSE
RECORD
POWER
STOP•EJECT
TV•VCR
CHANNEL
TRACKING
REW
PLAY
FWD
STEREO
Safety Tab
3. Press PLAY, if necessary.
4. Press TRACKING up or down on the remote or the VCR to remove any streaks
from the picture if necessary. Details are on page 18.
5. Press STOP•EJECT on the VCR or STOP on the remote.
6. Press REW on the VCR or the remote.
The VCR automatically rewinds the tape if it reaches the end of the tape during
playback. Also, if you press POWER while a tape is rewinding, the VCR turns
off automatically when it is completely rewound.
7. Press STOP•EJECT on the VCR to eject the tape once it is completely rewound.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
AUTO PLAY Feature
This feature lets you tell the VCR whether to automatically start playing
when a tape with the safety tab removed is inserted.
VCR MAIN MENU
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
4 VCR SETUP OPTIONS
SETUP OPTIONS
1 REMOTE CONTROL: VCR1
2 AUTO PLAY:
3 AUTO TV/VCR:
4 AUDIO SETUP
ON
ON
0 EXIT TO MAIN MENU
1. Press MENU on the remote to display the VCR MAIN MENU.
2. Press 4 to display the SETUP OPTIONS menu.
3. Press 2 to select AUTO PLAY: ON or OFF.
• Select ON if you want a tape with its safety tab removed to
start playing automatically.
• Select OFF if you do not want a tape with its safety tab
removed to start playing automatically.
Picture Search
You can search for a specific tape location during playback by fast
forwarding or rewinding the tape. Sound is turned off during picture
search. The time counter is removed from the TV screen during
picture search. The picture works best for tapes recorded in the SP or SLP
speed.
Fast Forward Search
1. Press FF to search forward at a faster-than-normal speed.
2. Press FF or PLAY to return to playback.
Rewind Search
1. Press REW to search backward at a faster-than-normal speed.
2. Press REW or PLAY to return to playback.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
DISPLAY Button
1. Press DISPLAY to display the status of the VCR,
channel number, time counter, date, time, and tape
speed on the TV screen.
STOP CH 05 0:30:00
Press
DISPLAY
Status Displays
You must set the time and date before they can be
displayed. If you do not press DISPLAY again, this
display times out.
11/17/95 FRI 01:30AM SLP
2. Press DISPLAY again to continually display the time
counter on the TV screen.
3. Press DISPLAY again to return to the normal status
0:30:00
displays.
Hours
Minutes
Seconds
Press
DISPLAY
Again
Time Counter Only
Time Counter
The time counter shows the actual time it takes to record a program
or play back a segment of a prerecorded tape. It helps locate the
beginning or end of programs you taped. The time counter resets to
0:00:00 when the tape is ejected from the VCR.
STOP CH 05 0:30:00
Status Displays
For example, if you recorded a 30-minute program at the beginning
of the tape, you would:
Press
DISPLAY
Again
11/17/95 FRI 01:30AM SLP
1. Insert the prerecorded tape.
2. Press DISPLAY twice to display only the time counter
on the TV screen.
3. Press FF to fast forward the tape until 0:30:00 appears
in the time counter. Press STOP.
This is the end of the program. You can begin recording
a new program.
4. Press CLEAR to reset the time counter to 0:00:00.
5. Press DISPLAY to remove the time counter from the
screen. These displays time out.
The time counter is removed from the TV screen during
picture search.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Zero Search
The zero search feature lets you quickly return to a counter reading of
0:00:00 at any spot on the tape. This is especially convenient when you
want to watch a segment of the tape several times.
ZERO SEARCH
CURRENT TAPE COUNTER IS
2:17:25
1. Insert the prerecorded tape.
2. Press DISPLAY twice to display only the time counter on the
TV screen.
PRESS REW TO GO TO 0:00
PRESS SEARCH TO EXIT
3. Use PLAY, FF, or REW to advance to the place on the tape
where you want to return quickly.
ZERO SEARCH
4. Press CLEAR to reset the time counter to 0:00:00.
5. Continue playing the tape.
6. Press STOP.
CURRENT TAPE COUNTER IS
-2:17:25
PRESS FWD TO GO TO 0:00
PRESS SEARCH TO EXIT
7. Press SEARCH to display the ZERO SEARCH menu on the
TV screen. The current time counter appears.
8. Press REW or FF to return to 0:00:00. The time counter
remains in the upper right corner of the TV screen during
search.
Commercial Scan (SEARCH Button)
This is useful for scanning commercials or short program segments.
1. Press SEARCH during playback to advance the tape
approximately 60 seconds.
Slow Motion
You can view the picture in slow motion during play or play pause.
Sound is turned off during slow-motion playback. Slow motion works
best in the SP or SLP speed.
1. Press SLOW to begin slow-motion playback.
2. Use TRACKING up or down on the remote or the VCR to
remove any streaks from the picture.
3. Press SLOW or PLAY to return to playback.
The VCR automatically switches from slow-motion playback
to stop after a few minutes.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Pause for Stop Action
This feature stops the tape in action and lets you examine the
details of the scene. Stop action works best for tapes recorded in
the SP or SLP speed.
1. Press PAUSE during playback to stop the action.
2. Press TRACKING up or down on the remote to reduce
any jittering of the picture.
3. Press PAUSE or PLAY to return to playback.
The VCR automatically switches from stop-action
playback to stop after a few minutes.
Frame Advance (F. ADV Button)
Frame advance lets you view one stop-action frame after another.
Frame advance works best for tapes recorded in the SP or SLP
speed.
1. Press PAUSE to stop the action.
2. Press F. ADV each time you want to view a frame of the
scene.
3. Press PAUSE or PLAY to resume normal playback.
Automatic Tracking
The VCR has automatic tracking which adjusts the picture when
you are playing back a tape recorded on another VCR. Automatic
tracking is turned on when a tape is inserted or the VCR’s power is
turned on.
Manual Tracking
Occasionally, you may need to manually adjust tracking on a tape
recorded on a different VCR or camcorder. Tracking is used when
playing a tape. It has no effect during recording.
When streaks or snow appear in the picture, press TRACKING up
or down on the remote or the VCR for the best possible picture.
During stop action pause, press TRACKING up or down on the
remote to reduce any jittering of the picture.
When the sound is noisy, press TRACKING up or down on the
remote for the best possible sound.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
PLAYBACK: HI-FI/MIX/LINEAR Feature
The VCR records the same audio on both the Hi-Fi and linear tracks on the
tape. The Hi-Fi sound is recorded on separate left and right stereo channels.
Monaural sound is recorded on the linear track.
To enjoy Hi-Fi sound, connect your VCR to a stereo television or
amplifier/ receiver using the audio/ video jacks. The PLAYBACK: HI-
FI/MIX/LINEAR feature lets you select which audio you play back.
To Select Playback Sound
1. Press MENU to see the VCR MAIN MENU.
2. Press 4 to see the SETUP OPTIONS menu on the TV screen.
3. Press 4 to see the AUDIO SETUP menu on the TV screen.
4. Press 2 to switch between HI-FI, MIX, or LINEAR sound.
•
•
•
Select HI-FI to play back sound recorded on the Hi-Fi track
and for normal use.
The Hi-Fi indicator lights in the VCR’s display panel.
Select MIX to play back the sound recorded on both the Hi-Fi
and linear track, sound-on-sound.
The Hi-Fi indicator lights in the VCR’s display panel.
Select LINEAR to play back the sound recorded on the linear
monaural track, such as a second audio program (SAP).
The Hi-Fi indicator in the VCR’s display panel turns off.
VCR MAIN MENU
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
4 VCR SETUP OPTIONS
SETUP OPTIONS
1 REMOTE CONTROL: VCR1
2 AUTO PLAY:
3 AUTO TV/VCR:
4 AUDIO SETUP
ON
ON
AUDIO SETUP
1 RECEPTION: STEREO
2 PLAYBACK: HI-FI
0 EXIT TO SETUP
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Types of Recordings
Your VCR provides different recording features. These features are explained in the following sections.
Recording Speeds
Press SPEED on the remote to select a recording speed (SP, LP, or SLP). The speed you select appears on
the TV screen.
SP (Standard Play) gives the best quality recording. That is why most
prerecorded, rental tapes are recorded in SP. Fewer programs can be recorded
on the tape. Special effects such as pause, frame advance, slow motion, and
picture search work well in this speed.
LP (Long Play) gives twice the recording time of tapes recorded in SP.
SLP (Super Long Play) gives three times the recording time of tapes recorded
in SP. Special effects such as pause, frame advance, slow motion, and picture
search work well in this speed.
Recording Time
Cassette
T-120
SP
2Hrs
LP
4Hrs
SLP
6Hrs
T-160
2Hrs 40Min
5Hrs 20Min 8Hrs
Recording Pause
This feature lets you prevent recording short passages of unwanted material.
Press PAUSE during recording to stop and start recording.
The VCR automatically switches from pause to stop after a few minutes.
Basic Recording – Operating Instructions
To make a recording
Turn on the TV and tune it to the VCR viewing channel, either 3, 4, or the TV’s video input channel.
1. Insert a tape with its safety tab in place.
2. If you are using one of the basic hookups, make sure the VCR indicator
appears in the VCR’s display panel. If not, press TV•VCR to turn it on.
3. Use SPEED on the remote to select a recording speed. The tape speed
indicator appears on the TV screen.
4. Select the channel to be recorded. The channel number appears on the TV
screen.
5. Press RECORD and PLAY at the same time on the VCR or REC on the
remote to begin recording. The RECORD indicator appears in the VCR’s
display panel while the VCR is recording.
Watch a TV channel while VCR is recording a different channel
1. Follow steps 1 through 5 above.
2. If you are using one of the basic hookups, press TV•VCR to switch to the
TV channel. The VCR indicator turns off in the display panel.
3. Select the channel you want to watch with the TV’s channel buttons.
4. Press STOP•EJECT on the VCR or STOP on the remote when the
recording is finished.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Express Recording
Express recording lets you record up to four hours without using the timer program
feature. The VCR turns off automatically at the end of the recording.
POWER
Hi-Fi
VCR
TIMER
SAP
RECORD
PAUSE
RECORD
POWER
STOP•EJECT
TV•VCR
CHANNEL
TRACKING
REW
PLAY
FWD
STEREO
PLAY
RECORD
Operating Instructions
1. Turn on the VCR.
2. Insert a tape with its safety tab in place.
3. Select the channel you want to record.
4. Use SPEED on the remote to select a recording
speed.
5. Press RECORD and PLAY at the same time on the
VCR or REC on the remote to activate recording.
6. Press RECORD or REC repeatedly until the amount
of recording time for the program is displayed on
the TV screen.
Each press of RECORD or REC increases the time
— 30 minutes up to 4 hours.
Press
RECORD
Recording
Time
0:30
1:00
1:30
2:00
3:00
4:00
0:00
(30 Min)
RECORD LENGTH 0:00
CH 04
(1 Hr)
(1 Hr, 30 Min)
(2 Hrs)
(3 Hrs)
(4 Hrs)
Recording Display on
TV Screen
(Turns Off)
The RECORD and TIMER indicators appear in the
VCR’s display panel.
During recording, press RECORD and PLAY
together on the VCR or REC on the remote to
display the time remaining on the TV screen.
Press RECORD or REC again to increase the
recording time.
Stopping a Recording in Progress
With the VCR: Press STOP•EJECT.
With the Remote: Press STOP.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Stereo Broadcast TV or SAP (Second Audio Program)
Some TV programs are broadcast with stereo audio or a second audio language (SAP). The RECEPTION:
STEREO/SAP/MONO feature lets you select the type of audio you want to record.
To record stereo broadcast TV or SAP
Turn on the TV and tune it to the VCR viewing channel, either 3, 4, or the TV’s video input.
1. Insert a tape with its safety tab in place.
2. If you are using one of the basic hookups, make sure the
VCR indicator appears in the VCR’s display panel. If not,
press TV•VCR to turn it on.
3. Use SPEED on the remote to select a recording speed. The
tape speed indicator appears on the TV screen.
4. Select the channel or line input to be recorded. The channel
number or VIDEO appears on the TV screen.
5. Set the RECEPTION: STEREO/SAP/MONO feature for the
type of audio you want to record.
A. Press MENU to display the VCR MAIN MENU.
B. Press 4 to display the SETUP OPTIONS menu.
VCR MAIN MENU
C. Press 4 again to display the AUDIO SETUP menu.
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
D. Press 1 to select the type of audio RECEPTION:
4 VCR SETUP OPTIONS
STEREO, SAP, or MONO.
•
Select STEREO for normal and stereo broadcast TV
SETUP OPTIONS
recording.
1 REMOTE CONTROL: VCR1
2 AUTO PLAY:
3 AUTO TV/VCR:
4 AUDIO SETUP
ON
ON
The STEREO indicator lights in the VCR’s display
panel when the station you are tuned to is broadcasting
stereo.
AUDIO SETUP
•
Select SAP to record SAP (second audio program)
instead of the normal audio.
1 RECEPTION: STEREO
2 PLAYBACK: HI-FI
The SAP indicator lights in the VCR’s display panel
when the station you are tuned to is broadcasting SAP.
0 EXIT TO SETUP
Set the PLAYBACK: HI-FI/MIX/LINEAR feature to
LINEAR to hear SAP. Details are on page 19.
•
Select MONO if the stereo signal is weak and the sound
is too “noisy.”
6. Press RECORD and PLAY at the same time on the VCR or
REC on the remote to start recording. The RECORD
indicator lights in the display panel.
7. Press STOP•EJECT on the VCR or STOP on the remote
when you are finished.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording Audio Only
You can record audio only from another audio source connected to the AUDIO1 IN (L and R) jacks
on the back of the VCR.
To Record Audio Only (Refer to hookup on page 7.)
1. Press the INPUT button on the remote until
VIDEO appears on the TV screen.
The VCR records audio from the audio
equipment connected to the AUDIO1 IN jacks.
2. Use SPEED on the remote to select the
recording speed.
The tape speed indicator appears on the TV
screen.
3. Start playing the audio source. Then, press
RECORD and PLAY at the same time on the
VCR or REC on the remote to begin recording.
The RECORD
lights in the VCR’s
indicator
display panel.
4. Press STOP•EJECT on the VCR or STOP on the
remote when you are finished.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording While You’re Away (Timer Recording)
The timer program feature lets you program the VCR to record up to eight different programs
within a one-year period. Before setting the timer, make sure that:
• The clock is set correctly.
• A tape with a safety tab has been inserted with enough tape to record the programs.
• If you receive all channels from a cable box, complete CABLE BOX SETUP on the
next page.
VCR MAIN MENU
Setting a Timer Recording
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
1. Press MENU on the remote to display the VCR MAIN MENU.
2. Press 1 to display the TIMER PROGRAMMING menu.
HOW OFTEN SHOULD THIS
PROGRAM RECORD?
3. Press 1, 2, 3, or 4 to select type of program.
1 ONE TIME — single program recorded once.
2 DAILY — program recorded at same time every day.
1 ONE TIME
2 DAILY
(EVERY DAY)
3 WEEKDAYS (MON - FRI)
4 WEEKLY (ONCE/WEEK)
3 WEEKDAYS — program recorded at same
time Monday through Friday.
PROGRAM 1 - ONE TIME
CHANNEL -- CABLE
4 WEEKLY — program recorded at same time
once a week.
PROGRAM 1 - ONE TIME
4. Press number buttons on the remote to enter the channel
number (or INPUT on the remote to select line input), start
time including AM or PM, end time, and start date of the
recording. Follow the on-screen prompts.
CHANNEL
08 CABLE
START TIME --:--
PROGRAM 1 - ONE TIME
CHANNEL
START TIME 02:10 PM
END TIME --:--
08 CABLE
Press CLEAR on the remote to correct an entry.
If you receive all channels from a cable box and have
completed CABLE BOX SETUP, the output channel of your
cable box and the word CABLE automatically appears on the
menu. See page 25.
PROGRAM 1 - ONE TIME
CHANNEL 08 CABLE
START TIME 02:10 PM
END TIME 03:35 PM
START DATE 11/17/95 FRI
TAPE SPEED SLP
5. Use SPEED on the remote to select the recording speed.
PRESS CLEAR TO CORRECT
PRESS MENU TO SAVE
6. Press MENU to enter your program. A reminder appears
which times out, or you can press MENU to return to the VCR
MAIN MENU.
7. Repeat steps 2–6 for additional programs or press
MENU to remove the menu from the TV screen.
PROGRAM 1
HAS BEEN SAVED
8. If you are using a cable box, leave it turned on and tuned to
the channel you want to record. Otherwise, turn off the
VCR before recording begins.
The TIMER indicator appears in the VCR display panel.
Stopping a Timer Recording
With the VCR: Press POWER and then STOP•EJECT within a few
seconds.
With the Remote: Press POWER and then STOP within a few
seconds.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording While You’re Away (Timer Recording)
Select cable box viewing channel. (Required only if all channels
are received from a cable box.)
VCR MAIN MENU
1. Press MENU on the remote to display the VCR
1 TIMER PROGRAMMING
MAIN MENU.
2 REVIEW PROGRAMS
3 CHANNEL SETUP
2. Press 3 to display the CHANNEL SETUP menu.
CHANNEL SETUP
3. Press 4 to display the CABLE BOX SETUP menu.
1 AUTO-SEARCH CHANNELS
2 ADD/REMOVE CHANNELS
4. Press 1 when the CABLE BOX SETUP menu
3 TUNING MODE: CABLE
appears.
4 CABLE BOX SETUP
5. Press two numbers on the remote to enter the
output channel of your cable box. Press 0 before a
single-digit number. (Valid numbers are 01 – 13.)
IS A CABLE BOX BEING
USED WITH THE VCR FOR
ALL CHANNELS?
1 YES, CONTINUE
Press CLEAR on the remote to correct an entry.
If you connected your cable box to the VCR using
the cable box’s AUDIO/VIDEO OUT jacks, press
INPUT on the remote to select the VIDEO IN option.
ENTER THE CHANNEL
NUMBER FOR VIEWING
THE CABLE BOX SIGNAL
6. Press MENU. A message appears which will time
--
out, or you can press MENU to return to CHANNEL
SETUP Menu.
YOUR VCR WILL NOW
The VCR automatically enters the output channel of
your cable box and CABLE in the TIMER
PROGRAMMING menu.
RECEIVE ALL CHANNELS
FROM THE CABLE BOX
ON VCR CH 11
PRESS MENU TO EXIT
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the AUDIO
and VIDEO IN jacks of the VCR. Recording from the line
input is convenient if you have a satellite receiver or
similar component attached to these jacks.
PROGRAM 1 - ONE TIME
CHANNEL
START TIME --:--
END TIME --:--
VIDEO IN
To timer record from the component connected to the
VCR’s line input, press INPUT on the remote to enter
VIDEO IN instead of the channel number on the TV screen
during timer programming.
START DATE --/--/--
TAPE SPEED SLP
PRESS CLEAR TO CORRECT
PRESS MENU TO EXIT
Checking or Clearing Timer Recordings
1. Press MENU on remote to display the VCR MAIN
VCR MAIN MENU
MENU.
1 TIMER PROGRAMMING
2 REVIEW PROGRAMS
3 CHANNEL SETUP
2. Press 2 for REVIEW PROGRAMS.
Each entered program is displayed for a few seconds in
sequence. Press MENU or 2 to display information
faster.
PROGRAM 1 - ONE TIME
CHANNEL
START TIME 02:10 PM
END TIME 03:35 PM
08 CABLE
START DATE 11/17/95 FRI
TAPE SPEED SLP
3. Press CLEAR on the remote when the program you
want to erase appears on the screen.
PRESS CLEAR TO DELETE
PRESS MENU FOR NEXT PROG
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Using Two VCRs for Copying and Editing Tapes
Operating Instructions (Refer to hookup on page 6.)
Use this VCR as the playback VCR and the other as the recording VCR.
1. Turn on the TV and VCRs.
2. Tune the TV to the VCR viewing channel, either 3, 4, or the TV’s video
input.
Caution: The unauthorized
recording of television
programs and other
3. If you connected your VCR using Option A (page 6), tune the recording
VCR to channel 3 or 4 – the one you selected on the back of the playback
materials may infringe the
rights of others.
VCR.
If you connected your VCR using Option B (page 6), press INPUT on the
recording VCR’s remote to select the line input.
4. Insert the tape you want to copy into the playback VCR. Insert a blank
tape with its safety tab in place into the recording VCR.
5. Press PLAY, then PAUSE on the playback VCR’s remote when you reach
the point on the tape or program where you want to begin copying. If the
tape was not recorded on the playback VCR, streaks may appear and you
may need to adjust tracking.
6. Press REC on the remote or RECORD on the VCR. Then, press PAUSE on
the recording VCR’s remote to place the recording VCR in record pause.
7. Press PAUSE on both VCRs at the same time to begin copying the tape.*
8. Edit out segments that you do not want to copy by pressing PAUSE on the
recording VCR’s remote to stop copying the tape. Then, locate the next
segment you want to copy on the playback VCR by using FWD, REW or
PLAY. Press PAUSE on the playback VCR’s remote. Press PAUSE on both
VCRs at the same time to resume copying.
9. Press STOP•EJECT on both VCRs when you are finished.
* You may turn off the TV after the recording has started as it does not have to
be on to copy a tape.
Copying and Editing Tapes Using Compatible Remote
VCR MAIN MENU
If you have a compatible RCA or ProScan remote with VCR1 and VCR2 buttons, you can
1 TIMER PROGRAMMING
program this VCR to respond to either VCR1 or VCR2. This lets you control both VCRs
2 REVIEW PROGRAMS
3 CHANNEL SETUP
4 VCR SETUP OPTIONS
with one remote for easier copying and editing.
Set the REMOTE CONTROL feature of this VCR to VCR1 or VCR2 position. Then, the
SETUP OPTIONS
compatible remote operates the VCR with either the VCR1 or VCR2 button — depending
on the position you select in the menu.
1 REMOTE CONTROL: VCR1
2 AUTO PLAY:
3 AUTO TV/VCR:
4 AUDIO SETUP
ON
ON
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display SETUP OPTIONS.
PRESS VCR2 TO CHANGE
3. Press 1 to activate the REMOTE CONTROL: VCR1 or
VCR2 feature.
SETUP OPTIONS
4. Press VCR1 or VCR2 on your compatible VCR’s remote
to change the setting and program this VCR to respond
to VCR1 or VCR2 — depending on the position you
selected in step 3.
1 REMOTE CONTROL: VCR2
2 AUTO PLAY:
3 AUTO TV/VCR:
4 AUDIO SETUP
ON
ON
0 EXIT TO MAIN MENU
26
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Specifications
Format:
VHS
Record/Playback
Video: 4-Head
System:
Audio: VHS Hi-Fi Stereo record/ playback system
Video Signal System:
Antenna:
EIA standard: NTSC color
75-ohm external VHF/ UHF combined
antenna terminal
Tuner:
USA:
181 channels capability*
(125 cable channels)
Canada: 178 channels capability*
(122 cable channels)
Type:
Autoprogramming frequency synthesis
120V AC, 60 Hz
Power Requirement:
Power Consumption:
Dimensions:
23 watts
3.5 inches high
(89 mm)
15 inches wide
(380 mm)
11.2 inches deep
(285 mm)
Weight:
8.4 pounds
(3.8 kg)
Storage Temperature
Range:
- 22 F to +149 F
˚
˚
Operating
Temperature Range:
+41 F to +104 F
˚
˚
*Check your cable company‘s compatibility requirements.
Cleaning the VCR
Use a soft cloth or dusting attachment of your vacuum cleaner to dust your
VCR. Remove dust from the ventilation holes on the top, back, sides, and
bottom of the cabinet.
Plastic surfaces are easily scratched and can be marred by alcohol and various
solvents. Avoid excessive use of oil-based furniture polishes since the
materials used in the cabinet will accumulate more dust. We recommend using
a non-abrasive, anti-static cleaner and polisher.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Location of Controls
Front Panel
Tape Compartment
POWER
Hi-Fi
VCR
TIMER
SAP
RECORD
PAUSE
RECORD
FWD
REW
PLAY
POWER
STOP•EJECT
TV•VCR
CHANNEL
TRACKING
STEREO
Remote Sensor
RECORD
CHANNEL or TRACKING up or down
Press RECORD and PLAY at the same time
to start the VCR recording.
Selects next higher or lower channel in the
VCR’s channel memory.
Used for express recording.
Adjusts tracking during playback.
Remote Sensor
FWD (Fast Forward)
Receives signals from the remote control.
Aim the remote at this sensor with no
objects between them.
Fast forwards the tape when the VCR is
stopped.
Searches the picture forward during
playback.
REW
Rewinds the tape when the VCR is
stopped.
PAUSE
Pauses the tape for stop-action viewing
during playback.
Searches the picture in reverse during
playback.
Pauses the tape during recording to
prevent recording unwanted material.
STOP•EJECT
Stops the normal functions such as record,
playback, rewind, fast-forward, or pause.
PLAY
Plays a tape.
Press when the VCR is stopped to eject the
cassette.
Press with RECORD to start the
VCR recording.
TV•VCR
POWER
Switches the picture signal so that it either
comes from the VCR or the TV channel.
Turns the VCR on or off.
continued on next page
28
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Location of Controls
Back Panel
R
AUDIO1
L
IN FROM
ANT.
VHF/UHF
OUT TO TV
OUT
IN
3 CH. 4
VIDEO1
VIDEO1 IN and AUDIO1 (R and L) IN Jacks
3CH.4 Switch
Receive signals from another component like a
VCR or camcorder when it is connected to these
jacks. Use INPUT on the remote to select.
Selects the channel to which you tune the TV to
see the VCR picture if you connect the VCR
using one of the basic hookups.
VIDEO1 OUT and AUDIO1 (R and L) OUT Jacks
IN FROM ANT. (Antenna) Connector
Send signals from VCR to another component like
a VCR or camcorder when it is connected to these
jacks.
Receives a signal from an antenna or cable
system when attached.
OUT TO TV Connector
Passes signal to TV using the cable supplied.
Display Panel
POWER
Hi-Fi
VCR
TIMER
SAP
RECORD
STEREO
Hi-Fi Indicator
TIMER Indicator
Lights when PLAYBACK: HI-FI/MIX/LINEAR
feature is set to HI-FI or MIX.
Shows VCR is set for timer recording when VCR is
turned off.
Flashes when the clock is not set or a timer
recording is set and there is no cassette in the VCR.
POWER Indicator
Lights when the VCR is turned on.
VCR Indicator
RECORD Indicator
Lights when using the TV•VCR button.
When using one of the basic hookups:
Lights when the VCR is recording.
STEREO Indicator
•
The picture is coming from the VCR when the
VCR indicator is on.
Lights when the station you are tuned to is
broadcasting stereo.
•
The picture is coming from the television
channels when the VCR indicator is off.
SAP Indicator
Lights when the station you are tuned to is
broadcasting SAP.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Trouble Checks
Sometimes problems can be easily solved by checking a few basic things. Check below before
you call for help or take your VCR to an Authorized RCA VCR Servicenter.
Trouble
Here's what to try:
No power
• Plug VCR into an operating outlet.
• Check connections.
VCR does not respond to remote
• Remove batteries and hold down one or more buttons for several seconds to
drain the microprocessor inside the remote and reset it. Re-install the
batteries and try remote again.
• Aim remote at VCR with no objects between them.
• Change batteries.
• Check setting of REMOTE CONTROL: VCR1 (VCR2) feature. See page 26.
Poor or no picture for normal TV viewing
Snowy or no picture during playback
• Press TV•VCR to turn VCR indicator off.
• Switch TV to an active channel.
• Check antenna connections.
• Press TV•VCR to turn VCR indicator on.
• Check TV channel selected (3 or 4) to make sure it matches the channel
selected with 3CH.4 switch on back of VCR.
• Check TV’s fine tuning.
• Check video cable connections between VCR and TV monitor.
• Set TV monitor to video input channel.
• Try another tape.
• Some snow/ streaks are normal during search, stop action, frame advance,
and slow-motion playback.
Streaks in picture during normal playback
Time counter not working
• Press the TRACKING button on the remote or the VCR to move streaks for
the best picture.
• Check tape — it may be worn out or of poor quality.
• The time counter does not advance during unrecorded portions of tape.
When an unrecorded segment of tape is encountered, the time counter will
hold its count until recorded material is detected again.
• A minus (–) appears in front of the time if you rewind the tape farther back
than a counter reading of 0:00:00.
Will not record or play
Will not record
• No cassette in VCR.
• Eject and reinsert cassette.
• Broken tape — try another cassette.
• VCR is in pause mode. Press PAUSE.
• Safety tab removed from cassette.
• Make sure the line indicator (VIDEO) does not appear on the TV screen for
normal recording from the VCR’s tuner. Press INPUT on the remote to turn
the line input off.
Stereo or SAP sound not recorded
• RECEPTION: STEREO/SAP/MONO feature must be set to STEREO to
record broadcast stereo. See page 22.
• RECEPTION: STEREO/SAP/MONO feature must be set to SAP to record
SAP. See page 22.
• STEREO or SAP indicator not on. Station not broadcasting stereo or SAP.
30
continued on next page
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Trouble Checks
Trouble
Here's what to try:
Rewind does not operate
• Tape already rewound.
Timer recording not made
or wrong program recorded
• Cable box was not turned on at time recording was to begin.
• Program entered incorrectly (wrong channel or times).
• Power interruption. Reset clock. See page 11.
• Check to see if time and date are correct — including AM/PM.
• Program exceeded tape’s length or tape was not rewound beforehand.
• VCR was not turned off at the time recording was to start.
• No tape in VCR or tape’s safety tab broken off.
• Clock was not set accurately (check AM/PM and date). See page 11.
Incorrect time or date
• VCR is removing tape from heads. This is normal. The head cylinder inside
the VCR continues to rotate for a few minutes after you put the VCR in the
stop mode.
VCR makes noise when stopped
• Check antenna connections.
• Check TUNING MODE: CABLE/ANTENNA feature. See page 9.
Will not AutoProgram active
channels correctly
• Channels must be placed in memory using AUTO-SEARCH CHANNELS
feature before channels can be added or removed from channel memory.
See page 9.
Cannot add or remove channels
• Cable channels over 69 can only be selected if TUNING MODE:
CABLE/ANTENNA feature is set to CABLE. Details are on page 9.
Cannot select channels over 69
• Set AUTO PLAY ON/OFF feature to ON. Details are on page 15.
Cassette with safety tab removed does not start to
play automatically
• Press SLOW or PLAY to return to normal playback.
Tape plays back in slow motion
• Clock was not set. See page 11.
• Timer recording programmed and no cassette in VCR.
TIMER indicator flashes
On-screen menus are in French
• LANGUAGE feature set to LANGUE. See page 11.
Time counter disappears while searching
• This is normal. Details are on page 15.
• PLAYBACK: HI-FI/MIX/LINEAR feature must be set to HI-FI to hear stereo
sound during playback. See page 19.
No stereo sound during playback
Stereo audio too noisy
• Stereo signal is weak. Set RECEPTION: STEREO/SAP/MONO feature to
MONO.
• Press the TRACKING up or down button on the remote to minimize the noise.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Limited Warranty
What your warranty covers:
•
Any defect in material or workmanship.
For how long after your purchase:
•
90 days for labor charges.
•
One year for parts.
The warranty period for rental units begins with the first rental.
What we will do:
•
•
Pay any Authorized RCA VCR Servicenter the labor charges to repair
your VCR.
Pay any Authorized RCA VCR Servicenter for the new or, at our option,
refurbished replacement parts required to repair your VCR.
How you get service:
•
Take your VCR to any Authorized RCA VCR Servicenter. To identify
your nearest Authorized RCA VCR Servicenter, ask your dealer, look in
the Yellow Pages, or call 1-800-336-1900.
•
•
Show the service technician your evidence of purchase date.
Pick up your VCR when repairs are completed.
What your warranty does not cover:
•
Customer instruction. (Your Owner’s Manual clearly describes how to
install, adjust, and operate your VCR. Any additional information should
be obtained from your dealer.)
•
•
•
•
•
•
Installation and related adjustments.
Signal reception problems not caused by your VCR.
Damage from misuse or neglect.
Cleaning of video/ audio heads.
Remote control batteries.
A VCR that has been modified or incorporated into other products or is
used for institutional or other commercial purposes.
•
•
A VCR purchased or serviced outside the USA.
Acts of God, such as but not limited to lightning damage.
Product Registration:
•
Please complete and mail the Product Registration Card packed with
your VCR. It will make it easier to contact you should it ever be
necessary. The return of the card is not required for warranty coverage.
How state law relates to this warranty:
•
This warranty gives you specific legal rights, and you also may have
other rights that vary from state to state.
If you purchased your VCR outside the United States:
•
This warranty does not apply. Contact your dealer for warranty
information.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Index
3CH.4 Switch ...................................3-8,9,29
Accessories, Included ................................8
Add or Remove Channels from
Two VCRs ...........................................6
Hookup, Choosing .....................................2
IN FROM ANT. Connector................3-5,29
INPUT Button..................................12,24,25
LANGUAGE (LANGUE) Menu ...............11
Language, Selecting .................................11
LANGUE (LANGUAGE) Menu ................11
Limited Warranty.....................................32
Line Input, Recording From ...................25
Location of Controls
Remote Control ...........................12-13
VCR Back Panel................................29
VCR Display Panel...........................29
VCR Front Panel...............................28
LP Speed ....................................................20
MENU Button ...............8-12,15,19,22,23-26
Number Buttons..................................12-13
Operating Instructions
Audio Only Recording ....................23
Broadcast Stereo TV Recording .....22
Copying Tapes..................................26
Express (XPR) Recording ................21
Playing a Tape ..................................14
Recording a Program .......................20
SAP Recording..................................22
Timer Recording...............................24
Operation, First Time ...........................8-11
OUT TO TV Connector......................3-5,29
PAUSE Button ......................12-13,18,20,26
Pause for Stop Action ..............................18
Pause, Recording ......................................20
Picture Search ...........................................15
PLAY Button .....12-13,14,15,17,20-23,26,28
PLAYBACK: HI-FI/LINEAR/MIX
Remove or Add Channels from
Memory..................................................9
REMOVE/ADD CHANNEL Menu ............9
Review Programs Feature.......................25
REW Button .....................12-13,15,17,26,28
SAP Indicator.......................................22,29
SAP, Recording.........................................22
SEARCH Button ............................12-13,17
Searching, Picture.....................................15
Sélectionner la langue..............................11
Sensor, Remote .........................................28
SET VCR CLOCK Menu .........................11
Setting a Timer Recording ......................24
Setting Up the VCR...............................8-11
SETUP OPTIONS Menu 10,15,19,22,23,26
SLOW Buttons................................12-13,17
Slow Motion ..............................................17
SLP Speed ..................................................20
Solving Problems ................................30-31
SP Speed ....................................................20
Specifications ............................................27
SPEED Button ..........................12-13,20-24
Speeds, Recording ....................................20
Startup ....................................................8-11
STEREO Indicator ..............................22,29
Stereo Amplifier/ Receiver
Connections...........................................7
Stereo TV, Recording ...............................22
Stop Action Pause ....................................18
STOP Button ...................12-13,17,20,22-25
STOP•EJECT Button.14,20,22,23,24,26,28
Stopping a Recording ..............................21
Stopping Timer Programs.......................24
Table of Contents........................................1
Time and Date, Setting ............................11
Time Counter ............................................16
TIMER Indicator .............................21,24,29
Timer Recording
Checking and Clearing....................25
Front VCR Line Input......................25
Recording ..........................................24
Setting ................................................24
Stopping ............................................24
Tracking, Automatic and Manual..........18
TRACKING Button ..............12, 14,17,18,28
Trouble Checks....................................30-31
TUNING MODE Feature............................9
Turn On VCR ..............................................8
TV•VCR Button ...............10,12-13,14,20,28
VCR Controls ............................................28
VCR Indicator .........................8,10,14,20,29
VCR MAIN MENU.............9-11,15,19,22-26
VCR, Cleaning ..........................................27
VCR, Turn On .............................................8
VCR1/ VCR2 Feature ...............................26
VCRs Memory, Placing Channels............9
VCRs, Connecting for Tape Copying ......6
VIDEO1 IN Jacks.......................6,7,23,25,29
VIDEO1 OUT Jacks ............................3-7,29
Warranty, Limited ....................................32
Zero Search................................................17
Memory...................................................9
ADD/REMOVE CHANNEL Menu ............9
Amplifier/ Receiver Connections.............7
Antenna Connections .............................2,3
AUDIO SETUP Menu ....................19,22,23
Audio Only, Recording ...........................23
AUDIO1/VIDEO1 IN Jacks.......6,7,23,26,29
AUDIO1/VIDEO1 OUT Jacks .......3-7,26,29
AUTO TV/VCR Feature............................10
AUTO PLAY Feature................................15
AUTO-SEARCH CHANNELS Feature ....9
Back Panel .................................................29
Batteries, Inserting in Remote...................8
Cable Box Setup ........................................25
Cable System With Cable Box
Connections.....................................2,4,5
Cable System Without Cable Box
Connections........................................2,3
Çable Box Setup ........................................25
Card, Registration .......................................i
CHAN Buttons...................................9,12,28
CHANNEL SETUP Menu .....................9,25
Checking Timer Recordings ...................25
Checks, Trouble...................................30-31
Choosing a Hookup ...................................2
Cleaning the VCR.....................................27
CLEAR Button ...........................11,12,24,25
Clearing Timer Programs........................25
Commercial Scan ......................................17
Compatible Remotes................................26
Connections .............................................2-7
Antenna............................................2-3
Amplifier/ Receiver.........................2,7
Audio/ Video Jacks......................2,3-7
Cable-TV .......................................2,4-5
Two VCRs ...........................................6
Contents.......................................................1
Copying Tape, Connections......................6
Copying Tapes..........................................26
Date and Time, Setting ............................11
Design Specifications ...............................27
DISPLAY Button.............................12,16,17
Display Panel ............................................29
Editing Tapes ............................................26
Express (XPR) Recording ........................21
FF (Fast Forward)
Feature ............................................19,22
Playing a Tape .....................................14-19
POWER Button .................8,12-13,21,24,28
POWER Indicator .................................8,29
PREV CH (Previous Channel)
Button .............................................12-13
Problems, Solving ...............................30-31
Product Registration ...................................i
REC Button...........................12-13,20-23,26
RECEPTION: STEREO/MONO/SAP
Feature ............................................22,23
RECORD Indicator........................20-24,29
Recording
Audio Only .......................................23
Basic ...................................................20
Broadcast Stereo TV.........................22
Express Recording ...........................21
From Another VCR..........................26
One Program While
Button ....................................12,15,16,17
First-Time Operation ............................8-11
Frame Advance Feature ..........................18
F. ADV (Frame Advance)
Button ..............................................12,18
Français ......................................................11
Front Panel ................................................28
FWD (Fast Forward)
Watching Another..........................20
Pause ..................................................20
SAP (Second Audio Program)........22
Speeds ................................................20
Timer.............................................24-25
Types Of ............................................20
RECORD Button .......................20-23,26,28
Registration Card ........................................i
REMOTE CONTROL Feature.................26
Remote Control ...................................12-13
Remote Sensor ..........................................28
Button ..............................................26,28
Hi-Fi Indicator ......................................19,29
Hookups
Antenna............................................2-3
Amplifier/ Receiver.........................2,7
Audio/ Video Jacks......................2,3-7
Cable-TV .......................................2,4-5
33
Download from Www.Somanuals.com. All Manuals Search And Download.
For your nearest Home
Entertainment Dealer
or Authorized Servicenter
call toll-free in the USA.
1-800-336-1900
Canadian Consumers –
Your toll free numbers are:
English: 1-800-522-0338
French: 1-800-522-0445
If you would like a copy of this manual in French, please follow the
instructions below:
Si un livret d’instructions en français n’est pas inclus avec votre appareil, vous
pouvez en obtenir un (indiquer le numéro de modèle, votre nom, et votre
adresse) en vous adressant à:
Thomson Consumer Electronics
Attention: Canadian Operations
P.O. Box 0944
Indianapolis, IN 46206-0944
If your VCR needs service, please contact your dealer or the nearest
Servicenter from the Yellow Pages. Please do not send any products
to the Indianapolis address listed in this manual or on the carton.
This will only add delays in service for your product.
10330 North Meridian Street
Indianapolis, IN 46290-1024
©
1995 Thomson Consumer Electronics, Inc.
®
Trademark(s) Registered
Marca(s) Registrada(s)
Printed in Japan
Part Number 95-VR602HF-1
VQTS3190 (A)
Download from Www.Somanuals.com. All Manuals Search And Download.
|