VR348
USER’S
GUIDE
VIDEO CASSETTE RECORDER
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Table of Contents
Picture Search ____________________ 13
Automatic Tracking _______________ 13
Manual Tracking__________________ 13
DISPLAY Button __________________ 14
Time Counter_____________________ 14
Commercial Scan _________________ 15
Index Search _____________________ 15
Zero Search ______________________ 16
Important Information
Warnings______________________________ i
Cautions ______________________________ i
Note to Cable TV Installer _______________ i
Product Registration ____________________ i
Hooking Up the VCR
Choosing a Hookup ____________________ 2
Antenna or Cable System Without a
Cable Box _________________________ 3
Cable System With Cable Box to
Recording a Program
Types of Recordings___________________ 17
Recording Speeds _____________________ 17
Recording Pause ______________________ 17
Basic Recording Ð
Unscramble All Channels ___________ 4
Cable System With Cable Box to
Unscramble Pay Channels Only______ 5
Connecting Two VCRs for Copying
Tapes_____________________________ 6
Operating Instructions _____________ 18
Watch a TV Channel While VCR
is Recording a Different Channel ____ 18
Express Recording (XPR)_______________ 19
Recording While You're Away
Setting Up the VCR
Startup
Check Accessories With VCR ________ 7
Insert Batteries in Remote ___________ 7
Turn on the TV ____________________ 8
Turn on the VCR___________________ 8
Place Channels in VCR's Memory ____ 8
Add or Remove Channels from
VCR Plus+ Recording ___________ 20-22
Timer Recording __________________ 23
Checking or Clearing VCR Plus+ or
Timer Recordings_______________ 24
Timer Recording From the
VCRÕs Line Input _______________ 24
Using Two VCRs for Copying
VCR's Memory __________________ 9
Select a Language/Choisissez une
Langue_________________________ 9
Set the Time and Date ______________ 9
Use TV•VCR Button _______________ 10
Set Auto TV/VCR Feature___________ 10
and Editing Tapes _________________ 25
References
Location of Controls
Front Panel_______________________ 26
Back Panel _______________________ 27
Display Panel_____________________ 28
Specifications_________________________ 29
Cleaning the VCR _____________________ 29
Trouble Checks ____________________ 30-31
Limited Warranty _____________________ 32
Index ________________________________ 33
Using the Remote Control
VCR Function Buttons _________________ 11
Playing a Tape
Operating Instructions_________________ 12
Auto Play Feature _____________________ 12
Using the Playback Features
Pause for Stop-Action______________ 13
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Choosing a Hookup
The hookups on pages 3 through 5 are divided into two hookup types: Basic (A) and
Advanced (B).
The basic hookups show the backs of TVs that have only an antenna/cable connection. It is
the easier of the two and additional accessories may not be needed.
The advanced hookups show the VCR hooked up to a monitor/receiver
(TV with audio and video jacks). This connection may improve the picture quality as well
as convenience of operation.
Answer the questions to choose the hookup for your VCR.
1. How do you receive your TV signals?
Choose one answer from below.
A. Outside antenna Ð Turn to page 3.
B. Rabbit ears (set-top) and/or bow tie antenna Ð Turn to page 3.
C. Cable System Ð Go to question 2.
2. What type of cable-TV system* do you have?
Choose one answer from below.
A. Cable without a box Ð Turn to page 3.
B. Cable box to unscramble all the channels Ð Turn to page 4.
C. Cable box to unscramble only pay channels, such as HBO, Showtime,
Cinemax, etc. Ð Turn to page 5.
*You may need to contact your local cable company for assistance.
Optional Hookups
How to hook up two VCRs for copying tapes?
A. Select a hookup by answering the questions above.
B. Then modify the connections as shown on page 6.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Antenna or Cable System Without a Cable Box
A. Basic hookup.
A
Use this hookup for a simple connection
which requires fewer accessories.
From Antenna
or Cable
300/75 Ohm
Adapter
Back of VCR
1. Set the CH3 CH4 switch on back of VCR
to either channel 3 or 4.
ANT. IN
RF OUT
You will tune the TV to this channel and use the
VIDEO
AUDIO
OR
TV•VCR button to watch the VCR.
IN
OUT
CH.
2. Connect as shown.
3
4
This connection may require additional
accessories not provided.
RF Coaxial Cable
(supplied)
3. Plug in power cords of VCR and TV.
Continue to page 7.
4.
75 to 75/300 Ohm
Separator
VHF
UHF
OR
Cable/
Antenna
Back of TV
B. Advanced hookup.
B
Use this hookup for slightly improved
picture quality and more convenient
operation Ñ use of TV•VCR button not
required.
From Antenna
or Cable
300/75 Ohm
Adapter
1. Connect as shown.
Back of VCR
This connection requires additional accessories
not provided.
ANT. IN
RF OUT
VIDEO
AUDIO
OR
If your TV is stereo, you may need a
Y-adapter to hear sound from both left and
right channels.
IN
OUT
CH.
3
4
2. Plug in power cords of VCR and TV.
Continue to page 7.
3.
Audio/Video Cables
RF Coaxial Cable
(supplied)
You will tune the TV to its video input to
watch the VCR.
VIDEO
INPUT
Set the Auto TV/VCR feature to OFF. See
page 10.
RIGHT
OUT AUDIO
S-VIDEO
IN
CABLE /
ANTENNA
L /
MONO
Back of TV
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Cable System With Cable Box to Unscramble All Channels
A. Basic hookup.
A
Use this hookup for a simple connection
which requires fewer accessories.
From Cable
Back of VCR
1. Set the CH3 CH4 switch on back of VCR
RF Coaxial
Cable
Cable Box
to either channel 3 or 4.
ANT. IN
RF OUT
VIDEO
AUDIO
IN
OUT
You will tune the TV to this channel and use the
IN
TV•VCR button to watch the VCR.
OUT
CH.
3
4
2. Connect as shown.
This connection may require additional
accessories not provided.
RF Coaxial Cable
(supplied)
3. Plug in power cords of VCR, TV, and
cable box.
75 to 75/300 Ohm
Separator
Continue to page 7.
4.
VHF
UHF
OR
Cable/
Antenna
Back of TV
B. Advanced hookup.
B
Use this hookup for slightly improved
picture quality and more convenient
operation Ñ use of TV•VCR button not
required.
Cable Box
From Cable
IN
OUT
1. Connect as shown.
This connection requires additional accessories
not provided.
RF Coaxial
Back of VCR Cable
If your TV is stereo, you may need a
Y-adapter to hear sound from both left and
right channels.
ANT. IN
VIDEO
AUDIO
IN
2. Plug in power cords of VCR, TV, and
RF OUT
OUT
CH.
cable box.
3
4
Continue to page 7.
3.
RF Coaxial Cable
(supplied)
Audio/Video Cables
You will tune the TV to its video input to
watch the VCR.
VIDEO
INPUT
Set the Auto TV/VCR feature to OFF. See
page 10.
RIGHT
OUT AUDIO
S-VIDEO
IN
Caution: The unauthorized recording
of satellite broadcasts, television
programs, or other materials may
infringe the rights of others.
CABLE /
ANTENNA
L /
MONO
Back of TV
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Cable System With Cable Box to Unscramble Pay Channels Only
(such as HBO, Showtime, Pay-Per-View, etc.)
A. Basic hookup.
A
Use this hookup for a simple connection
which requires fewer accessories.
From Cable
1. Set the CH3 CH4 switch on back of VCR
Back of VCR
to either channel 3 or 4.
RF Coaxial
Cable
Cable Box
You will tune the TV to this channel and use the
ANT. IN
RF OUT
VIDEO
AUDIO
IN
OUT
TV•VCR button to watch the VCR.
IN
OUT
CH.
2. Connect as shown.
3
4
This connection may require additional
accessories not provided.
RF Coaxial Cable
(supplied)
3. Plug in power cords of VCR, TV, and
cable box.
75 to 75/300 Ohm
Separator
Continue to page 7.
4.
VHF
UHF
OR
Cable/
Antenna
Back of TV
B. Advanced hookup.
B
Cable Box
Use this hookup for slightly improved
picture quality and more convenient
operation Ñ use of TV•VCR button not
required.
From Cable
IN
OUT
Signal
Splitter
1. Connect as shown.
This connection requires additional accessories
not provided.
Back of VCR
If your TV is stereo, you may need a
Y-adapter to hear sound from both left and
right channels.
ANT. IN
VIDEO
AUDIO
IN
2. Plug in power cords of VCR, TV, and
RF OUT
OUT
CH.
cable box.
3
4
Continue to page 7.
3.
Audio/Video Cables
You will tune the TV to its video input to
watch the VCR. All pay channels are
viewed through the VCR.
VIDEO
INPUT
RF Coaxial
Cable
(supplied)
RIGHT
OUT AUDIO
S-VIDEO
IN
CABLE /
ANTENNA
L /
MONO
Back of TV
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Connecting Two VCRs for Copying Tapes
A
Option A hookup.
Use this hookup for a simple connection which
requires fewer accessories.
Playback VCR
From Antenna, Cable
or Cable Box
1. Select a hookup from pages 2 through 5
ANT. IN
RF OUT
VIDEO
AUDIO
and then modify with this connection.
IN
2. Set the CH3 CH4 switch on the playback
OUT
CH.
VCR to either channel 3 or 4.
3
4
You will tune the recording VCR to this channel
to receive the signal from the playback VCR.
RF Coaxial Cable
(supplied)
Recording VCR
3. Connect as shown.
This connection may require additional
accessories not provided.
ANT. IN
RF OUT
VIDEO
AUDIO
IN
4. Plug in power cords of VCRs and TV.
OUT
CH.
3
4
Continue to page 7.
5.
RF Coaxial
Cable
Audio/Video
Cables
or
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
B
Option B hookup.
Use this hookup for slightly improved copy
quality and more convenient operation Ñ use of
TV•VCR button not required.
Playback VCR (only)
ANT. IN
VIDEO
AUDIO
1. Select a hookup from pages 2 through 5
IN
and then modify with this connection.
RF OUT
OUT
CH.
3
4
2. Connect as shown.
This connection requires additional accessories
not provided.
If your other VCR is stereo, you may need a
Y-adapter to hear sound from both left and
right channels.
Recording VCR
Audio/Video Cables
3. Plug in power cords of VCRs and TV.
ANT. IN
RF OUT
VIDEO
AUDIO
Continue to page 7.
4.
IN
From Antenna, Cable
or Cable Box
OUT
CH.
3
4
You will select the line (audio/video)
input on the recording VCR to receive the
signal from the playback VCR.
Audio/Video
Cables
RF Coaxial Cable
(supplied)
or
Caution: The unauthorized recording
of satellite broadcasts, television
programs, or other materials may
infringe the rights of others.
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
1. Check accessories with VCR.
Contact your dealer if any items are missing.
POWER
TV•VCR
PLAY
REW
FF
REC
STOP
PAUSE
SPEED
INPUT
DISPLAY
1
2
5
8
3
2 “AA” Batteries
4
6
9
7
PREV CH
0
CHANNEL
CLEAR
MENU
SEARCH
TRACKING
+
-
RF Coaxial Cable
(Stock No. 221396)
Remote
(Stock No. 233456)
2. Insert batteries in remote.
7
continued on next page
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
3. Turn on the TV.
A. Turn on the TV.
B. If you used one of the basic hookups, tune the TV
to the channel selected with the CH3 CH4 switch
on back of VCR.
If you used one of the advanced hookups, tune the
TV to the TVÕs video input. (See TV ownerÕs
manual for details.)
4. Turn on the VCR.
A. Press POWER on the remote.
5. Place channels in the VCR’s memory.
The first time you turn on the VCR or after a power
interruption, perform the AUTO CHANNEL SEARCH
so that your VCR can locate the channels available
through your signal typeÑcable or antenna. The
signal type is automatically selected when you perform
the AUTO CHANNEL SEARCH function. Also, if you
change the signal type, you will need to perform AUTO
CHANNEL SEARCH again.
AUTO CHANNEL SEARCH
Now scanning channel 45
Press any key to cancel
A. Press MENU to display the VCR MAIN MENU on
the TV screen. If this menu does not appear:
¥ Make sure TV is tuned to same channel as the
CH3 CH4 switch on the back of the VCR or the
TVÕs video input (refer to TVÕs manual).
¥ Press MENU again.
¥ If you use a basic hookup, check VCR indicator
in display panel Ð it should be on. Press
TV•VCR to turn it on.
¥ Check the connections.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Set Clock
4 Channels
B. Press 4 to display the CHANNELS menu.
C. Press 1 to begin AUTO CHANNEL SEARCH.
The VCR automatically selects CABLE (cable TV)
or ANTENNA. If you need to change the setting
manually, press 3.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type:
4 VCR Plus+ Channel List
CABLE
Wait until the channel numbers stop changing. This
takes about one to two minutes. The TV will then tune
to the lowest channel found. Pressing CHANNEL up or
down will select only the active channels.
0 Exit
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
6. Add or remove channels from the VCR’s memory.
You may want to add or remove channels if some of them are
not active, have weak signals, or you do not want to watch
them.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Set Clock
4 Channels
We recommend channels be placed in memory using the
AUTO CHANNEL SEARCH feature described on the previous page
before adding or removing channels. Channels 2-13 and VID1
were placed in memory at the factory.
CHANNELS
A. Press MENU on the remote to see the VCR MAIN MENU on
1 Auto Channel Search
2 Add/Remove Channels
the TV screen.
B. Press 4 to display the CHANNELS menu.
C. Press 2 to display the ADD/REMOVE CHANNELS menu.
D. Follow the directions on the screen.
ADD/REMOVE CHANNELS
Channel 08
is presently ADDED
E. Add or remove more channels by entering channel
Press CLEAR to remove
Press MENU to exit
numbers or using CHANNEL up or down.
7. Select a language./Choisissez une langue.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Set Clock
4 Channels
5 Preferences
6 Language
You can select the language for the displays on the VCR.
A. Press MENU on the remote to see the VCR MAIN MENU
on the TV screen.
B. Press 6 to display the LANGUAGE menu.
LANGUAGE/LANGUE
Select a Language.
Choisissez une langue.
C. Select English or French.
¥
¥
Press 1 to select English.
1➔English (anglais)
2 French (fran•ais)
Press 2 to select Fran•ais (French).
Press MENU to continue
8. Set the time and date.
When you first turn on the VCR, --:-- appears in the
clock area of the VCRÕs display panel.
VCR
SLP
A. Press MENU on remote to display the VCR MAIN MENU
VCR MAIN MENU
1 VCR Plus+
on the TV screen.
2 Timer Recordings
3 Set Clock
B. Press 3 to display SET TIME AND DATE.
C. Enter the time and date with the number buttons on the
SET TIME AND DATE
remote.
Time --:-- --
(hh:mm)
¥ Press 0 before single-digit numbers.
Example: press 0, then 5, then 0, then 7 for a time of
Date --/--/--
5:07. Press 1 for AM or 2 for PM.
¥ Press CLEAR on the remote to change incorrect entries.
Press MENU to cancel
D. Press MENU on remote to remove SET TIME AND DATE
from the TV screen and start the clock. The time will
appear in the VCRÕs display panel and the time and date
will appear on the TV screen when you press DISPLAY.
continued on next page
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
9. Use TV•VCR button.
Skip this step if you used one of the advanced hookups.
When using one of the basic hookups, the TV•VCR button
lets you switch between the picture coming from the VCR
or the picture from the TV channel. This button lets you
record a program on the VCR while watching another
channel on the TV. Details are on page 18.
A. Press TV•VCR to see the picture from the VCR.
The VCR indicator lights in the display panel.
B. Press CHANNEL up or down to change channels on
the VCR.
The channel number changes in the display panel.
C. Press TV•VCR to see the TV channels.
The VCR indicator does not light in the display panel.
Change channels using the TVÕs remote.
D. Return the TV to the VCR viewing channel Ñ CH3
or CH4.
E. Press TV•VCR to switch back to the picture from the
VCR.
10. Set Auto TV/VCR feature.
If you used one of the basic hookups and did not connect
the audio/video jacks of the VCR to the TV, leave the
Auto TV/VCR feature set to ON.
If you have connected your VCR using the audio/video
input of your TV, you can prevent the VCR indicator from
turning on automatically and interrupting the cable or
antenna signal to your TV.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Set Clock
4 Channels
5 Preferences
A. Press MENU on the remote to see VCR MAIN MENU
on the TV screen.
B. Press 5 to display PREFERENCES.
PREFERENCES
1 Auto Play:
C. Press 2 to select Auto TV/VCR: ON or OFF.
ON
ON
2 Auto TV/VCR:
¥ Select ON if you used one of the basic hookups and
watch the VCR on channel 3 or 4 of your TV. The
VCR will automatically switch the TV¥VCR setting
to VCR every time the VCR is turned on, a tape
with the safety tab removed is inserted, or you
press PLAY.
0 Exit
¥ Select OFF if you used one of the advanced
hookups and watch your VCR on the video input
channel of your TV. The VCR indicator will not
turn on automatically and the signal from your
antenna or cable to your TV will not be interrupted.
Pressing TV•VCR on the remote will still turn the
VCR indicator on or off and switch the antenna
signal.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
VCR Function Buttons
VCR Function Buttons
PLAY
CHANNEL Up or Down
Selects next higher or lower
channel in the VCRÕs channel
memory.
Plays a tape.
POWER
Turns the VCR on and off.
POWER
TV•VCR
CLEAR
PREV CH (Previous Channel)
Resets time counter to 0:00:00.
PLAY
Switches between two channels.
REW
FF
Allows you to change entries
when setting the clock or VCR for
a VCR Plus+ or timer recording.
Select one channel and then use
the number buttons to select
another. Press PREV CH to
switch between the two
channels.
REC
STOP
PAUSE
DISPLAY
Shows VCR operating displays
on the TV screen.
INPUT
DISPLAY
SPEED
REC
Displays the time counter.
Starts VCR recording.
2
5
8
3
1
Used for express recording
(XPR). See page 19.
FF (Fast Forward)
Fast forwards the tape when the
VCR is stopped.
6
9
4
REW (Rewind)
Rewinds the tape when the VCR
is stopped.
Searches the picture in forward
motion during playback.
7
INPUT
Searches the picture in reverse
motion during playback.
Turns the line input on or off.
VID1 appears in VCRÕs display
panel and VIDEO appears on TV
screen.
PREV CH
0
SEARCH
Displays INDEX and ZERO
SEARCH menus on TV.
Line input refers to the signal
coming from the component
connected to the AUDIO/VIDEO
IN jacks on the back of the VCR.
CHANNEL
MENU
CLEAR
Lets you advance tape 60 or 120
seconds during playback.
SEARCH
TRACKING
+
-
SPEED (Tape Speed)
Selects a recording speed
(SP or SLP).
MENU
Displays the VCR MAIN MENU
on the TV screen.
STOP
Removes a menu from the
screen.
Stops the normal functions such
as record, playback, rewind, fast
forward, and pause.
Numbers (0 through 9)
Select a channel up to 99 by
pressing two numbers.
TRACKING – and +
Lets you manually reduce the
streaks that may appear on the
picture during play or pause.
Select a cable channel over 99 by
pressing and holding 1 until 1– –
appears on the screen. Then
press the other two numbers.
TV•VCR
Switches the picture signal so
that it either comes from the VCR
or the TV channel. See page 10.
PAUSE
Pauses action for viewing during
playback.
Pauses recording to prevent
recording of unwanted scenes.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Operating Instructions
To Play a Tape
1. Turn on the TV and tune it to channel 3, 4, or TVÕs video input
to see the picture from the VCR.
2. Insert a tape in the VCR.
VCR automatically turns on. The cassette-in
indicator
lights, and the VCR indicator lights if the Auto TV/VCR feature
is set to ON. The tape automatically begins playback if the
safety tab on the cassette has been removed and the Auto Play
feature is turned on.
RECORD
REW PLAY• PAUSE FWD
POWER STOP• EJECT
CHANNEL
TRACKING
Safety Tab
3. Press PLAY on the remote or PLAY•PAUSE on the VCR, if
necessary. PLAY appears in the VCRÕs display panel.
4. Press TRACKING up or down to remove any streaks from the
picture, if necessary. Details are on page 13.
5. Press STOP on the remote or STOP•EJECT on the VCR.
6. Press REW. REW will appear in the VCRÕs display panel.
The VCR will automatically rewind the tape if it reaches the
end of the tape during playback. While rewinding, you can
press POWER and the VCR will turn off after rewinding.
7. Press STOP•EJECT on the VCR to eject the tape once it is
completely rewound.
Auto Play Feature
This feature lets you tell the VCR whether you want it to automatically start playing a tape that
is inserted with the safety tab removed.
VCR MAIN MENU
1 VCR Plus+
1. Press MENU on the remote to see the VCR MAIN MENU on the
2 Timer Recordings
3 Set Clock
4 Channels
5 Preferences
TV screen.
2. Press 5 to display the PREFERENCES menu.
PREFERENCES
1 Auto Play:
2 Auto TV/VCR:
3. Press 1 to select Auto Play: ON or OFF.
ON
ON
¥ Select ON to have a tape with its safety tab removed start
playing automatically.
¥ Select OFF if you do not want a tape with its safety tab
removed to start playing automatically.
0 Exit
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Pause for Stop Action
This feature stops the tape in action and allows you to examine the details of the
scene. Stop action works best for tapes recorded in SLP speed.
1. Press PAUSE on the remote or PLAY•PAUSE on
the VCR during playback to stop the action.
PAUS appears in the VCRÕs display panel.
2. Press PLAY•PAUSE on the VCR or PLAY on the
remote to return to playback.
The VCR will automatically switch from stop-
action playback to stop after a few minutes.
Picture Search
You can search a picture during playback by fast forwarding or rewinding the tape.
Sound is turned off during picture search. Picture search works best for tapes
recorded in SLP speed.
Fast Forward Search
1. During playback, press FF on the remote or FWD
on the VCR to search forward at a faster-than-
normal speed.
SRCH+ appears in the VCRÕs display panel.
2. To return to playback, press FF on the remote,
FWD on the VCR, PLAY on the remote, or
PLAY•PAUSE on the VCR.
Rewind Search
1. During playback, press REW to search in reverse at
a faster-than-normal speed.
SRCH– appears in the VCRÕs display panel.
2. To return to playback, press REW, PLAY on the
remote, or PLAY•PAUSE on the VCR.
Automatic Tracking
The VCR has automatic tracking which adjusts the picture when playing back a
tape recorded on another VCR. Automatic tracking is turned on whenever a tape is
inserted or the VCRÕs power is turned on.
Manual Tracking
Occasionally, you may need to manually adjust tracking on a tape recorded on a
different VCR or camcorder. The TRACKING buttons on the remote or VCR are
used when playing a tape. They have no effect during recording.
¥ When streaks or snow appear, press TRACKING up
or down for the best possible picture.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
DISPLAY Button
STOP CH 05 0:30:00
1. Press DISPLAY to display the status of the
VCR, channel number, time counter, date,
time, and tape speed on the TV screen. The
VCR status will appear in the display panel.
Press
DISPLAY
Status Displays
Will Time Out
The time and date must be set before they are
displayed. If you do not press DISPLAY again,
these displays will time out.
11/18/96 Mon 01:30AM SLP
2. Press DISPLAY again to have only the time
counter remain on the TV screen. The time
counter will appear instead of the time in the
VCRÕs display panel.
0:30:00
Hours
Minutes
3. Press DISPLAY again to remove the time
Press
DISPLAY
Again
Seconds
counter from the TV screen.
Time Counter Only
Will Not Time Out
The time counter will remain in the VCRÕs
display panel.
4. Press DISPLAY again to return to the normal
status displays.
The time will appear in the VCRÕs display
panel.
No Displays
Press
Turning off the VCR automatically returns the
displays to normal.
DISPLAY
Again
Time Counter
The time counter shows the elapsed time it takes to record a program or play
back a segment of a prerecorded tape. It helps locate the beginning or end of
programs you taped. The time counter resets to 0:00:00 whenever the tape is
ejected from the VCR.
For example, if a 30-minute program was recorded at the beginning of the
tape, you would:
0:30:00
1. Insert the prerecorded tape. Make sure the
tape is rewound. Press STOP on the remote or
STOP•EJECT on the VCR.
Hours
Minutes
Seconds
2. Press DISPLAY twice to display only the time
counter on the TV screen.
3. Press CLEAR to reset the time counter to
0:00:00.
4. Press FF on remote or FWD on the VCR to fast
forward the tape until the time counter reads
0:30:00. Press STOP on the remote or
STOP•EJECT on the VCR.
This is the approximate end of the program
and you can begin recording at this spot.
5. Press DISPLAY to remove the time counter
from the screen and return to the normal
displays.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Commercial Scan (SEARCH Button)
This is useful for scanning commercials or short program segments.
1. Press SEARCH once during playback to advance the tape
approximately 60 seconds.
2. Press SEARCH twice during playback to advance the tape
approximately 120 seconds.
SRCH+ appears in the VCRÕs display panel.
Index Search
The VCR has a ÒVHS Index Search SystemÓ that automatically records an index mark on the
tape every time you begin recording a program. During playback you can locate the
program you want to play by the number of index marks.
INDEX SEARCH
Press REW or FF
to begin scanning
OR
Enter a specific
Index number
--
The VCR will automatically locate the index number you select. The VCR will search
forward or reverse from the location you are on the tape.
1. Insert the prerecorded tape and press STOP.
2. Press SEARCH on the remote to display the INDEX SEARCH
Press SEARCH to exit
menu on the TV screen.
3. Press FF or REW to search for the next index mark or press
two number buttons to enter the specific index mark you
want the VCR to search for.
Press CLEAR to correct an entry.
4. Press FF to search forward or press REW to search in
INDEX SEARCH
reverse.
5. Press STOP to stop index searching.
Searching for
index number
03
Some index marks may be missed by the VCR.
¥ A mark too close to your location on the tape.
Press STOP to cancel
¥ The mark at the beginning of a recorded segment of five
minutes or less.
¥ The first index mark on the tape when you start at the
beginning of the tape.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Zero Search
The zero search feature allows you to quickly return to a counter reading of 0:00:00 at
any spot on the tape. This is convenient when you want to watch a segment of the tape
several times.
1. Insert the prerecorded tape and press STOP.
ZERO SEARCH
2. Press DISPLAY twice to display only the time counter on
the TV screen.
Current tape counter is
2:17:25
3. Locate the point on the tape that you want to return to
Press REW to go to
0:00:00
quickly.
4. Press CLEAR to reset the time counter to 0:00:00.
Press SEARCH to exit
5. You can continue to play the tape or perform other
ÐORÐ
functions. When you are finished, press STOP.
6. Press SEARCH twice to display the ZERO SEARCH menu.
ZERO SEARCH
The current tape counter is displayed.
7. Press REW to return to 0:00:00. When the VCR reaches
Current tape counter is
-2:17:25
0:00:00 it will begin playback.
Press FF to go to
0:00:00
If the time counter reading has a minus (Ð ) in front of it,
press FF to return to a reading of 0:00:00.
Press SEARCH to exit
8. Press STOP to stop zero search.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Types of Recordings
Your VCR provides different types of recording. These types are explained in the following sections:
Basic Recording Ð Operating Instructions
Express (XPR) Recording
Recording While You're Away
VCR Plus+ Recording
Timer Recording
Using Two VCRs for Copying Tapes
Using the Recording Features
Recording Speeds
Press SPEED on the remote to select a recording speed (SP or SLP). The speed you
select appears on the TV screen and in the VCRÕs display panel. The VCR
automatically selects the playback speed (SP, LP, or SLP).
Cassette
Type
T120
Recording Time
SP
2Hr
SLP
6Hr
8Hr
T160
2Hr 40Min
SP (Standard Play) gives the best quality recording.
That is why most prerecorded, rental tapes are
recorded in SP. Fewer programs can be recorded on
the tape.
SLP (Super Long Play) gives three times the recording
time of tapes recorded in SP. Special effects, such as
pause and picture search, work well.
Recording Pause
This feature allows you to prevent recording short passages of unwanted material.
Press PAUSE during recording to stop and start
recording. REC.P appears in the VCRÕs display panel.
The VCR will automatically switch from pause to stop
after a few minutes.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Types of Recordings
Basic Recording – Operating Instructions
To Make a Recording
Turn on the TV and tune it to the VCR viewing channel, either 3, 4, or TVÕs video
input channel.
1. Insert a tape with safety tab in place.
The cassette-in indicator
display panel.
lights in the VCRÕs
2. If using one of the basic hookups, make sure the
VCR indicator appears in the VCRÕs display
panel. If not, press TV•VCR to turn it on.
3. Select recording speed using SPEED on the
remote.
The tape speed indicator appears in the VCRÕs
display panel and on the TV screen.
4. Select the channel to be recorded.
The channel number appears in the VCRÕs
display panel and on the TV screen.
5. Press REC on the remote or RECORD on the VCR
to begin recording. REC appears in the VCRÕs
display panel while the VCR is recording.
Watch a TV Channel While VCR is Recording a
Different Channel
1. Follow steps 1 through 5 above.
2. If using one of the basic hookups, press TV•VCR
to switch to the TV channel. The VCR indicator
will turn off in the display panel.
3. Select the channel you want to watch with the
TVÕs channel buttons.
4. Press STOP on the remote or STOP•EJECT on
the VCR when recording is finished.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Express Recording (XPR)
Express recording lets you record up to four hours without using the timer program feature. The VCR will
turn off automatically at the end of the recording.
RECORD
REW PLAY• PAUSE FWD
POWER STOP• EJECT
CHANNEL
VCR
SLP REC
TRACKING
Display showing 30
minutes remaining for
express recording.
RECORD
Operating Instructions
1. Turn on the VCR.
2. Insert a tape with safety tab in place.
3. Select the channel you want to record.
4. Select the desired recording speed using SPEED on
the remote.
5. Press REC on the remote or RECORD on the VCR
twice to activate XPR recording.
6. Press REC on the remote or RECORD on the VCR
repeatedly until the amount of recording time for
the program is displayed in the VCRÕs display panel
or on the TV screen.
Press
Recording
RECORD
Time
0:30
1:00
1:30
2:00
3:00
4:00
(30 Min)
REC
Ch 11
Record Length 0:30
(1 Hr)
(1 Hr, 30 Min)
(2 Hrs)
Press REC to set length
(3 Hrs)
(4 Hrs)
Express Display on
TV Screen
(Normal Recording)
Each press increases the time Ñ 30 minutes up to four
hours.
The amount of time the VCR will record and REC will
appear in the VCRÕs display panel.
You can increase the amount of recording time by
pressing REC on the remote or RECORD on the VCR.
Stopping a Recording in Progress
Press and hold STOP on the remote or STOP•EJECT
on the VCR for approximately three seconds.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording While You’re Away (VCR Plus+* Recording)
VCR Plus+ Setup for Antenna or Unscrambled Cable Systems
(Not Requiring a Cable Box)
A VCR Plus+ channel number is assigned for each broadcast or cable channel. These
numbers are listed in most publications that list PlusCode* numbers.
1. Prepare the worksheet on the opposing page for the
VCR Plus+ channels that are different than the
channels you receive them on. Refer to the chart
below for standardized VCR Plus+ channel numbers.
Broadcast or Cable-TV
Station Name
VCR Plus+
Channel Number
Channel Number You
Receive This Station On
HBO
ESPN
ABC
FOX
33
See Note 1
See Note 1
See Note 1
See Note 1
34
See Note 2
See Note 2
Note 1: Check your local or cable listing for the channel number you receive this station on.
Note 2: Check your local listing for the broadcast or VCR Plus+ channel number assigned to this station.
2. Press MENU on the remote to display the VCR
VCR MAIN MENU
MAIN MENU on the TV screen.
1 VCR Plus+
2 Timer Recordings
3 Set Clock
4 Channels
3. Press 4 to display CHANNELS menu.
4. Press 4 to display VCR Plus+ Channel List menu.
5. Using your worksheet, press two numbers to enter
each channel number you receive on a different
channel than the assigned VCR Plus+ channel
number.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type:
4 VCR Plus+ Channel List
CABLE
Press CHANNEL up or down to move the numbers
up or down on the menu.
VCR+ Channel My Channel
5
4
--
--
Press CLEAR on the remote to erase a number.
3 -> -> -> --
2
1
--
--
6. Press MENU when you are finished.
Auto channel search must be performed before
setting the VCR Plus+ channel list.
Use CHAN up/dn to select
Press 0-9 to change
Press MENU to save
Standardized VCR Plus+ Channel Numbers for Cable-TV
58 The Movie Channel
48 Music Television
49 The Nashville Network
38 Nickelodeon
65 MeteoMedia/The Weather Network
48 MuchMusic Network
55 MusiquePlus
52 Nashville Network
73 Newsworld/CBC
53 Le Reseau des Sports
43 The Sports Network
64 Super Ecran
37 Super Ecran B
98 Super Ecran C
66 Telatino Network
46 TV5 Montreal
92 Viewer's Choice 1
93 Viewer's Choice 2
94 Viewer's Choice 3
95 Viewer's Choice 4
71 Vision TV: Canada’s Faith Network
38 Youth TV, Canada Inc
U.S.A. List
Canadian List
35 American Movie Classics
39 Arts & Entertainment
57 Black Entertainment
54 Bravo
67 Allarcom Pay Television/Superchannel
44 Arts & Entertainment
72 Cable News Network-Headline News
61 Cable News Network
70 Canadian Home Shopping Network
56 Canal Famille
64 Nostalgia Television
99 Quality Value Cable
41 Showtime
42 Cable News Network
45 Cinemax
98 Cinemax 2
97 Showtime 2
69 Cathay International Television Inc
68 Chinavision Canada Corp
60 Country Music Television
63 Family Channel
59 Sports Channel
52 Turner Network Television
44 USA Network
37 The Discovery Channel
53 The Disney Channel
63 Entertainment Television
34 ESPN Sports Network
47 The Family Channel
33 Home Box Office
95 Home Box Office 2
96 Home Box Office 3
51 The Learning Channel
46 Lifetime
62 Video Hits 1
62 First Choice
93 Viewer’s Choice 1
94 Viewer’s Choice 2
55 WGN Chicago
96 First Choice Two
97 First Choice Three
99 First Choice Four
43 WTBS Atlanta
60 WWOR New York
90 House of Commons
91 La Chaine Francaise
51 The Learning Channel
*VCR Plus+ and PlusCode are trademarks of Gemstar Development Corporation.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
TM
VCR Plus+ Channel Worksheet
Use this worksheet to create a list from which you can set up your VCR Plus+ channel list.
VCR Plus+
Channel Number*
Channel Number You
Receive This Station On**
Broadcast or Cable TV
Station Name
(See Standardized VCR Plus+ Channel Chart)
(Such as ABC, NBC, CBS, etc.)
*Check your local listing for VCR Plus+ channel numbers assigned to network stations.
**Check your local or cable listing for the channel numbers to enter in this column.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording While You’re Away (VCR Plus+ Recording)
The VCR Plus+ and timer program features let you program the VCR to record up to eight different programs within a one
year period. Before using VCR Plus+ to record a program, make sure that:
¥ The clock is set correctly.
¥ A tape with safety tab has been inserted with enough tape to record the programs.
¥ The VCR is setup for VCR Plus+ programming.
¥ If you do not use a cable box for all channels, complete VCR Plus+ setup on pages 20-21.
Setting a VCR Plus+ Recording
1. Press MENU on the remote to display the VCR MAIN MENU
on the TV screen.
2. Press 1 to display the VCR PLUS+ menu.
3. Press numbers on the remote to enter the PlusCode number
for the program you want to record. PlusCode numbers are
found in most local TV listings.
Press CLEAR on the remote to correct an entry.
VCR MAIN MENU
4. Press MENU to enter the program.
1 VCR Plus+
If the VCR does not recognize the PlusCode number,
Unrecognized number... Please re-enter appears on the TV
VCR PLUS+
screen. Check the number and enter it again.
Enter PlusCode number
(from TV listing)
5. Press 1, 2, 3, or 4 to select type of program.
-
1 One time Ð single program recorded once.
2 Daily Ð program recorded at same time every day.
How often should this
program record?
3 Weekdays Ð program recorded at same
time Monday through Friday.
1 One time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
4 Weekly Ð program recorded at same time
once a week.
6. Press SPEED on the remote to change recording speed.
Program 1 (One time)
7. Press CLEAR if you want to change the program end time.
Channel
Start time 02:10 PM
End time 03:35 PM
Start date 11/18/96 Mon
Tape speed SLP
08
This feature allows you to extend the recording time on VCR
Plus+ programs. This option may be useful when recording
programs such as sporting events that could go past
scheduled broadcast times.
Press CLEAR to correct
Press MENU to save
8. Press MENU to enter your program. A reminder appears
which will time out.
PROGRAMS OVERLAP may appear on the screen if you
entered two programs where the times overlap.
9. The TIMER RECORDINGS menu appears. Press 3 to enter
an additional VCR Plus+ program, or press 0 to exit.
10. Turn off the VCR before recording time.
TIMER appears in the VCRÕs display panel when the timer
has been programmed.
11. If using a cable box, leave it turned on and tuned to the
channel you want to record.
Stopping a Recording in Progress
Press and hold STOP on the remote or STOP•EJECT on the
VCR for approximately three seconds.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording While You’re Away (Timer Recording)
The VCR Plus+ and timer program features let you program the VCR to record up to eight
different programs within a one year period. Before setting the timer, make sure that:
¥ The clock is set correctly.
¥ A tape with safety tab has been inserted with enough tape to record the programs.
Setting a Timer Recording
1. Press MENU on remote to display VCR MAIN MENU.
2. Press 2 to display TIMER RECORDINGS menu.
3. Press 1 to display Create a New Program menu.
VCR MAIN MENU
4. Press 1, 2, 3, or 4 to select type of program.
1 One time Ñ single program recorded once.
2 Daily Ñ program recorded at same time every day.
1 VCR Plus+
2 Timer Recordings
TIMER RECORDINGS
3 Weekdays Ñ program recorded at same
1 Create a New Program
time Monday through Friday.
4 Weekly Ñ program recorded at same time
once a week.
How often should this
program record?
1 One time
5. Press number buttons on the remote to enter the channel
number (use INPUT or 0, 0 to select video input), start time
including AM or PM, end time, and start date of the
recording. Just follow the on-screen prompts.
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
Program 2 (One time)
Press CLEAR to correct an entry.
Channel
--
6. Press SPEED on the remote to change recording speed.
Program 2 (One time)
7. Press MENU to enter your program. A reminder appears
which will time out or you can press MENU to return to the
VCR MAIN MENU.
Channel
08
Start time --:--
PROGRAMS OVERLAP may appear on the screen if you
Program 2 (One time)
have entered two programs where the times overlap.
Channel
Start time 02:10 AM 1=AM
End time --:-- 2=PM
08
8. The TIMER RECORDINGS menu appears. Press 1 to enter
an additional timer program, or press 0 to exit.
9. Turn off the VCR before recording begins.
Program 2 (One time)
Channel 08
Start time 02:10 PM
End time 03:35 PM
Start date 11/18/96 Mon
Tape speed SLP
TIMER appears in the VCRÕs display panel when the timer
has been programmed.
10. If using a cable box, leave it turned on and tuned to the
channel you want to record.
Press CLEAR to correct
Press MENU to save
Stopping a Recording in Progress
Press and hold STOP on the remote or STOP•EJECT on the
VCR for approximately three seconds.
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording While You’re Away
Checking or Clearing VCR Plus+ or Timer Recordings
1. Press MENU on remote to display VCR
VCR MAIN MENU
1 VCR Plus+
MAIN MENU on TV screen.
2. Press 2 to display the TIMER
2 Timer Recordings
RECORDINGS menu.
3. Press 2 for Review Existing Progs.
TIMER RECORDINGS
feature.
1 Create a New Program
2 Review Existing Progs.
4. Press MENU to display information for
the next program.
Program 1 (One time)
5. Press CLEAR when the program you
Channel
Start time 02:10 PM
End time 03:35 PM
08
want to erase appears on the screen.
Start date 11/18/96 Mon
Tape speed SLP
Press CLEAR to erase
Press MENU for next prog
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the
AUDIO and VIDEO IN jacks of the VCR. Recording
from the line input is convenient if you have a
satellite receiver or similar component attached to
these jacks. To timer record from the component
connected to the VCRÕs line input:
Program 1 (One time)
Channel
Start time --:-- --
End time --:--
VIDEO
Start date --/--/--
Tape speed SLP
Press CLEAR to correct
Press MENU to exit
Press INPUT (or 0,0) to select VIDEO in place of
the channel number on the TV screen during
timer programming.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Using Two VCRs for Copying and Editing Tapes
Operating Instructions (Refer to hookup on page 6.)
Use this VCR as the playback VCR and the other as the recording VCR.
1. Turn on the TV and VCRs.
2. Tune TV to the VCR viewing channel, either 3, 4, or TVÕs video input.
3. If you have connected your VCR using Option A (page 6), tune recording
VCR to channel 3 or 4 Ñ the one selected on the back of the playback
Caution: The unauthorized
VCR.
recording of television
programs and other
If you have connected your VCR using Option B (page 6), press INPUT on
recording VCRÕs remote to select the line input (VID1).
materials may infringe the
rights of others.
4. Insert the tape you want to copy into playback VCR. Insert a blank tape
with safety tab in place into recording VCR.
5. Press PLAY, then PAUSE on playback VCR when you reach the point on
the tape or program where you want to begin copying. If the tape was
not recorded on the playback VCR, streaks may appear and you may
need to adjust tracking.
6. Press RECORD, then PAUSE, on recording VCR.
7. Press PAUSE buttons on both VCRs at the same time to begin copying the
tape.*
8. Edit out segments that you do not want to copy by pressing PAUSE on
recording VCR to stop copying the tape. Then locate the next segment
you want to copy on the playback VCR by using FWD, REW, and PLAY.
Press PAUSE on the playback VCR. Press PAUSE at the same time on
both VCRs to resume copying.
9. Press STOP on both VCRs when you are finished.
* You may turn off the TV after the recording has started as it does not have to
be on to copy a tape.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Location of Controls
Front Panel
Tape Compartment
RECORD
REW PLAY• PAUSE FWD
POWER STOP• EJECT
CHANNEL
TRACKING
Remote Sensor
CHANNEL or TRACKING Up or Down
RECORD
Selects next higher or lower channel in
the VCRÕs channel memory.
Start the VCR recording.
Used for express recording.
Adjusts tracking during playback or
pause.
Remote Sensor
Receives signals from the remote control.
Aim the remote at this sensor with no
objects between them.
FWD (Fast Forward)
Fast forwards the tape when the VCR is
stopped.
REW
Searches the picture forward during
playback.
Rewinds the tape when the VCR is
stopped.
PLAY•PAUSE
Plays a tape.
Searches the picture in reverse during
playback.
Pauses the tape for stop-action viewing
during playback.
STOP•EJECT
Stops the normal functions such as record,
playback, rewind, fast-forward, or pause.
Pauses the tape during recording to
prevent recording unwanted material.
Press when the VCR is stopped to eject the
cassette.
POWER
Turns the VCR on or off.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Location of Controls
Back Panel
ANT. IN
RF OUT
VIDEO
AUDIO
IN
OUT
CH.
3
4
CH3 CH4 Switch
VIDEO and AUDIO IN Jacks
Selects the channel to which you will tune the TV
to see the VCR picture if you connect the VCR
using one of the basic hookups.
Receives signals from another component, like a
VCR or camcorder, when it is connected to these
jacks. Use INPUT or channel number 0,0 to
select VID1 in the VCRÕs display panel.
ANT. (Antenna) IN Connector
VIDEO and AUDIO OUT Jacks
Receives the signal from an antenna or cable
system that is attached to this connector.
Sends signals from VCR to another component,
like a TV monitor or VCR, when it is connected
to these jacks.
RF OUT Connector
Passes signal to TV using the cable supplied.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Display Panel
TIMER Indicator
Cassette-in Indicator
AM
TIMER
VCR
SLP REC
Tape Speed
Indicator
REC Indicator
Time, Time Counter, Channel Number
(or Line Indicator), and Status Indicators
Reverse search
VCR stopped
Timer recording
Cassette-in Indicator (
)
SRCH–
STOP
T.REC
Lights when a tape is in the VCR. Flashes while
tape is ejecting.
REC Indicator
Channel Number, Line Indicator (VID1), Time,
Time Counter, or Status Indicator
Lights when the VCR is recording.
The current time, time counter, channel number, or
line indicator (VID1) appears here.
Tape Speed Indicators (SP, LP, or SLP)
Press SPEED to change.
Status indicators show what the VCR is doing.
BYE
F.FWD
HI
PLAY
PAUS
REC
Turned off
Fast forward
Turned on
Playback
Play pause
Record
TIMER Indicator
Lights when a timer recording is set.
VCR Indicator (Applies Only to Basic Hookups)
Press TV•VCR to turn on or off.
VCR indicator on: Picture from VCR.
VCR indicator off: Picture from TV channel.
REC.P
Record pause
Rewind
REW
Forward search
SRCH+
28
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Specifications
Format:
VHS
Record/Playback
Video: 2-Head
System:
Audio: Mono record/playback system
Video Signal System:
Antenna:
EIA standard: NTSC color
75-ohm external VHF/UHF combined
antenna terminal
Tuner:
USA:
181 channels capability*
(125 cable channels)
Canada: 178 channels capability*
(122 cable channels)
Type:
AutoProgramming frequency synthesis
120V AC, 60 Hz
Power Requirement:
Power Consumption:
Dimensions:
17 watts
3.5 inches high
(90 mm)
15.5 inches wide
(393 mm)
12.5 inches deep
(318 mm)
Weight:
9.5 pounds
(4.3 kg)
Storage Temperature
Range:
- 22 F (- 30 C) to +149 F (+65 C)
û
û
û
û
Operating
Temperature Range:
+41 F (+5 C) to +104 F (+40 C)
û
û
û
û
*Check your cable companyÔs compatibility requirements.
Cleaning the VCR
Use a soft cloth or dusting attachment of your vacuum cleaner to dust your
VCR. Remove dust from the ventilation holes on the top, back, sides, and
bottom of the cabinet.
Plastic surfaces are easily scratched and can be marred by alcohol and various
solvents. Avoid excessive use of oil-based furniture polishes since the materials
used in the cabinet will accumulate more dust. We recommend using a non-
abrasive, anti-static cleaner and polisher.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Trouble Checks
Sometimes problems can be easily solved by checking a few basic things. Check below
before you call for help or take your VCR to an Authorized RCA VCR Servicenter.
Trouble
Here's what to try:
¥ Plug VCR into an operating outlet.
¥ Check connections.
No power
¥ Remove batteries and hold down one or more buttons for several seconds to
drain the microprocessor inside the remote to reset it. Reinstall the batteries
and try remote again.
VCR does not respond to remote
¥ Aim remote at VCR with no objects between them.
¥ Change batteries.
No picture when VCR turned on Ð using a basic
hookup
¥ Press TV•VCR to turn VCR indicator on. See page 10.
¥ Check to see if Auto TV/VCR feature is set to OFF. See page 10.
Poor or no picture for normal TV viewing
¥ Press TV•VCR to turn VCR indicator off.
¥ Switch TV to an active channel.
¥ Check antenna connections.
Snowy or no picture during playback
¥ Press TV•VCR to turn VCR indicator on.
¥ Check TV channel selected (3 or 4) to make sure it matches the channel
selected with CH3 CH4 switch on back of VCR.
¥ Check TVÕs fine tuning.
¥ Check video cable connections between VCR and TV monitor.
¥ Set TV monitor to video input channel.
¥ Try another tape.
¥ Some snow/streaks are normal during search or stop-action playback.
¥ The time counter does not advance during unrecorded portions of tape.
When an unrecorded segment of tape is encountered, the time counter will
hold its count until recorded material is detected again.
¥ A minus (Ð) will appear in front of the time if you rewind the tape farther
back than a counter reading of 0:00:00.
Time counter not working
Will not record or play
¥ No cassette in VCR.
¥ Eject and re-insert cassette.
¥ Broken tape Ñ try another cassette.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Trouble Checks
Trouble
Here's what to try:
¥ Some snow/streaks are normal during search or stop-action playback.
Streaks in picture during normal playback
Will not record
¥ VCR is in pause mode. Press PAUSE.
¥ Safety tab removed from cassette.
¥ Make sure the line indicator (VID1) is turned off in VCRÕs display panel for
normal recording from the VCRÕs tuner. Press INPUT to turn off the line
indicator.
¥ Tape already rewound.
Rewind does not operate
¥ Wrong PlusCode number entered.
¥ Cable box was not turned on or was tuned to the wrong channel at time
recording was to begin.
VCR Plus+ or timer recording not made
or wrong program recorded
¥ Program entered incorrectly (wrong channel or times).
¥ Power interruption. Clock area in display panel will show - -:- -.
¥ Check to see if time and date are correct Ñ including AM/PM.
¥ Check Signal Type: CABLE/ANTENNA feature. See page 8.
¥ Program exceeded tapeÕs length or tape was not rewound beforehand.
¥ VCR was not turned off at the time recording was to start.
¥ No tape in VCR or cassetteÕs safety tab broken off.
Clock shows incorrect time or date
VCR makes noise when stopped
¥ Power interruption. Clock on the front panel will show --:--.
¥ Clock was not set accurately (check AM/PM and date).
¥ Time counter display appears in VCRÕs display panel. Press DISPLAY on
remote.
¥ VCR is removing tape from heads. This is normal. The head cylinder inside
the VCR will continue to rotate for a few minutes after you put the VCR in
the stop mode.
Will not auto channel search active
channels correctly
¥ Check antenna connections.
¥ Check Signal Type: CABLE/ANTENNA feature. See page 8.
Cannot select channels over 69
¥ Cable channels over 69 can only be selected if Signal Type:
CABLE/ANTENNA feature is set to CABLE. Details are on page 8.
Cassette with safety tab removed does not start to
play automatically
¥ Set Auto Play ON/OFF feature to ON. Details are on page 12.
Displays appear in wrong language
¥ Language feature set incorrectly. Details are on page 9.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Limited Warranty
What your warranty covers:
¥
Any defect in material or workmanship.
For how long after your purchase:
¥
Ninety days for labor charges.
¥
One year for parts.
The warranty period for rental units begins with the first rental or 45 days
from the date of shipment to the rental firm, whichever comes first.
What we will do:
¥
¥
Pay any Authorized RCA VCR Servicenter the labor charges to repair
your VCR.
Pay any Authorized RCA VCR Servicenter for the new or, at our option,
refurbished replacement parts required to repair your VCR.
How you get service:
¥
Take your VCR to any Authorized RCA VCR Servicenter. To identify
your nearest Authorized RCA VCR Servicenter, ask your dealer, look in
the Yellow Pages, or call 1-800-336-1900.
¥
¥
Show the service technician your evidence of purchase date.
Pick up your VCR when repairs are completed.
What your warranty does not cover:
¥
Customer instruction. (Your OwnerÕs Manual clearly describes how to
install, adjust, and operate your VCR. Any additional information should
be obtained from your Dealer.)
¥
¥
¥
¥
¥
¥
Installation and related adjustments.
Signal reception problems not caused by your VCR.
Damage from misuse or neglect.
Cleaning of video/audio heads.
Remote control batteries.
A VCR that has been modified or incorporated into other products or is
used for institutional or other commercial purposes.
¥
¥
A VCR purchased or serviced outside the USA.
Acts of God, such as but not limited to lightning damage.
Product Registration:
¥
Please complete and mail the Product Registration Card packed with
your VCR. It will make it easier to contact you should it ever be
necessary. The return of the card is not required for warranty coverage.
How state law relates to this warranty:
¥
This warranty gives you specific legal rights, and you also may have
other rights that vary from state to state.
If you purchased your VCR outside the United States:
¥
This warranty does not apply. Contact your dealer for warranty
information.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Index
Accessories, Included . . . . . . . . . . . . . . .7
Add or Remove Channels from Memory9
ADD/REMOVE CHANNEL Menu . . . . . .9
ANT. (Antenna) IN Connector . . . .3-8,27
Antenna Connections . . . . . . . . . . . . . .2,3
AUDIO and VIDEO Jacks . . . . . .3-6,24,27
Auto Channel Search Feature . . . . . . . .8
Auto Play Feature . . . . . . . . . . . . . . . . . .12
Auto TV/VCR Feature . . . . . . . . . . . . . . .10
Automatic Tracking . . . . . . . . . . . . . . . .13
Back Panel . . . . . . . . . . . . . . . . . . . . . . . .27
Basic Recording . . . . . . . . . . . . . . . . . . .18
Batteries, Inserting in Remote . . . . . . . .7
Cable System With Cable Box . . . . .2,3-5
Cable System Without Cable Box . . .2,3
Card, Registration . . . . . . . . . . . . . . . . . . .i
Cassette-In Indicator . . . . . . . . . .12,18,28
CH3 CH4 Switch . . . . . . . . . . . . . .3-6,8,27
CHANNEL Buttons . . . . . . . . .8,9,10,11,20
Channel Number Indicator . . . . . . . . . .28
CHANNELS Menu . . . . . . . . . . . . . . . .8,20
CHANNEL•TRACKING Button . . . .13,26
Checking Timer and VCR Plus+
Programs . . . . . . . . . . . . . . . . . . . . . .24
Checks, Trouble . . . . . . . . . . . . . . . .30-31
Choisissez une Langue . . . . . . . . . . . . . .9
Choosing a Hookup . . . . . . . . . . . . . . . . .2
Cleaning the VCR . . . . . . . . . . . . . . . . . .29
CLEAR Button . .9,11,14,15,16,20,22,23,24
Clearing Timer and VCR Plus+
Programs . . . . . . . . . . . . . . . . . . . . . .24
Commercial Scan . . . . . . . . . . . . . . . . . .15
Connections
Antenna . . . . . . . . . . . . . . . . . . . . . .2-3
Cable With a Cable Box . . . . . . .2,4-5
Cable Without a Cable Box . . . . . .2,3
Two VCRs for Copying Tapes . . . . .6
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Copying and Editing Tapes . . . . . . . . .25
Copying Tape, Connections . . . . . . . . . .6
Date, Set . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Design Specifications . . . . . . . . . . . . . . .29
DISPLAY Button . . . . . . . . . . . . . . .9,11,14
Display Panel . . . . . . . . . . . . . . . . . . . . .28
Displays, Status . . . . . . . . . . . . . . . . . . .14
Editing and Copying Tapes . . . . . . . . .25
Express Recording . . . . . . . . . . . . . . . . .19
Express recording, Stopping . . . . . . . .19
FF (Fast Forward) Button . . . . . .11,13-16
First-Time Operation . . . . . . . . . . . . .7-10
Front Panel . . . . . . . . . . . . . . . . . . . . . . .26
Hookups
Antenna . . . . . . . . . . . . . . . . . . . . . .2-3
Cable With a Cable Box . . . . . . .2,4-5
Cable Without a Cable Box . . . . . .2,3
Choosing . . . . . . . . . . . . . . . . . . . . . . .2
Two VCRs for Copying Tapes . . . . .6
INDEX Feature . . . . . . . . . . . . . . . . . . . .15
INDEX SEARCH Menu . . . . . . . . . . . . .15
INPUT Button . . . . . . . . . . .11,22,23,24,27
LANGUAGE Menu . . . . . . . . . . . . . . . . . .9
Limited Warranty . . . . . . . . . . . . . . . . . .32
Line Input, Recording From . . . . . . . . .24
Manual Tracking . . . . . . . . . . . . . . . . . .13
MENU Button . . .8,9,10,11,12,20,22,23,24
Number Buttons . . . . . . . . . . . . . . . . . . .11
On-Screen Displays . . . . . . . . . . . . . . . .14
Operation
Basic Recording . . . . . . . . . . . . . . . .18
Copying Tapes . . . . . . . . . . . . . . . . .25
Express Recording . . . . . . . . . . . . . .19
First Time . . . . . . . . . . . . . . . . . . .7-10
Playback . . . . . . . . . . . . . . . . . . . . . .12
Timer Recording . . . . . . . . . . . . . . .18
VCR Plus+ Recording . . . . . . . .20-22
PAUSE Button . . . . . . . . . . . . .11,13,17,25
Pause for Stop Action . . . . . . . . . . . . . .13
Pause, Recording . . . . . . . . . . . . . . . . . .17
Picture Search, . . . . . . . . . . . . . . . . . . . .13
PLAY Button . . . . . . . . . . . .11,12,13,14,25
PLAY•PAUSE Button . . . . . . .12,13,25,26
POWER Button . . . . . . . . . . . . . . . . . .8,11
PREFERENCES Menu . . . . . . . . . . .10,25
PREV CH (Previous Channel) Button .11
Problems, Solving . . . . . . . . . . . . . . .30-31
Product Registration . . . . . . . . . . . . . . . . .i
REC and RECORD
Specifications . . . . . . . . . . . . . . . . . . . . .29
SPEED Button . . . . . . . . . . . . . . . .11,17,18
Speeds, Recording . . . . . . . . . . . . . . . . .17
Standardized VCR Plus+ Channel
Number Chart . . . . . . . . . . . . . . . . .20
Startup . . . . . . . . . . . . . . . . . . . . . . . . .7-10
Status Displays . . . . . . . . . . . . . . . . . . . .14
Status Indicators . . . . . . . . . . . . . . . . . . .28
Stop Action Pause . . . . . . . . . . . . . . . . .13
STOP Button . .11,12,14-16,18,19,22,23,25
Stopping a Timer Recording . . . . . . . .23
Stopping a VCR Plus+ Recording . . . .22
Stopping an Express Recording . . . . . .19
STOP•EJECT Button . .12,18,19,22,23,26
Table of Contents . . . . . . . . . . . . . . . . . . .1
Tape Speed Indicators . . . . . . . . . . . . . .28
Tape, Playing . . . . . . . . . . . . . . . . . . . . .12
Time and Date, Set . . . . . . . . . . . . . . . . . .9
Time Counter . . . . . . . . . . . . . . . . . . .14,28
Time Display . . . . . . . . . . . . . . . . . . . . . .28
Time, Set . . . . . . . . . . . . . . . . . . . . . . . . . .9
TIMER Indicator . . . . . . . . . . .19,22,23,28
Timer Recording
Checking or Clearing . . . . . . . . . . .24
Setting . . . . . . . . . . . . . . . . . . . . . . . .23
Stopping . . . . . . . . . . . . . . . . . . . . . .23
TIMER RECORDINGS Menu .22,23,24,25
TRACKING Buttons . . . . . . . . . . .11,12,13
Tracking, Automatic and Manual . . . .13
Trouble Checks . . . . . . . . . . . . . . . . .30-31
Turn On TV . . . . . . . . . . . . . . . . . . . . . . . .8
Turn on VCR . . . . . . . . . . . . . . . . . . . . . . .8
TV, Turn On . . . . . . . . . . . . . . . . . . . . . . .8
TV¥VCR Button . . . . . . . . . . . . . . . . . . .10
TV•VCR Button . . . . . . . . . . . . . . . . .11,18
Types of Recordings . . . . . . . . . . . . . . .18
Using TV¥VCR Button . . . . . . . . . . . . .10
VCR Controls . . . . . . . . . . . . . . . . . . .26-28
VCR Indicator . . . . . . . . . . . . . . . .12,18,28
VCR MAIN MENU . . . .8,10,12,20,22,23,24
VCR Plus+ Recording
Buttons . . . . . . . . . . . . .11,18,19,25,26
REC Indicator . . . . . . . . . . . . .18,19,25,26
REC.P (Record Pause) Indicator . . . . .17
Recording
Basic . . . . . . . . . . . . . . . . . . . . . . . . . .18
Express . . . . . . . . . . . . . . . . . . . . . . .19
Pause . . . . . . . . . . . . . . . . . . . . . . . . .17
Speeds . . . . . . . . . . . . . . . . . . . . . . . .17
Timer . . . . . . . . . . . . . . . . . . . . . . . . .23
Types of . . . . . . . . . . . . . . . . . . . . . . .18
VCR Plus+ . . . . . . . . . . . . . . . . . .20-22
Registration Card . . . . . . . . . . . . . . . . . . .i
Remote Sensor . . . . . . . . . . . . . . . . . . . .26
Remove or Add Channels from
Memory . . . . . . . . . . . . . . . . . . . . . . . .9
REMOVE/ADD Channel Menu . . . . . . . .9
REW (Rewind) Button . . . .11,12,13,15,16
RF OUT Connector . . . . . . . . . . . . .3-8,27
Safety Precautions . . . . . . . . . . . . . . . . . . .i
SEARCH Button . . . . . . . . . . . . . .11,15,16
Select a Language . . . . . . . . . . . . . . . . . . .9
Sensor, Remote . . . . . . . . . . . . . . . . . . . .26
Set Clock Feature . . . . . . . . . . . . . . . . . . .9
Set the Time and Date . . . . . . . . . . . . . . .9
SET TIME AND DATE Menu . . . . . . . . . .9
Setting a Timer Recording . . . . . . . . . .23
Setting a VCR Plus+ Recording . . . . . .22
Setting Up the VCR . . . . . . . . . . . . . .7-10
Signal Type: CABLE/ANTENNA
Checking or Clearing . . . . . . . . . . .23
Channel Worksheet . . . . . . . . . . . . .21
Stopping . . . . . . . . . . . . . . . . . . . . . .22
VCR PLUS+ Menu . . . . . . . . . . . . .22
VCR Plus+ Setup Channels . . . . . .20
VCR PlusCodes . . . . . . . . . . . . . . . .22
Worksheet . . . . . . . . . . . . . . . . . . . . .21
VCR, Cleaning . . . . . . . . . . . . . . . . . . . .29
VCR, Turn On . . . . . . . . . . . . . . . . . . . . . .8
VCRs Memory, Placing Channels In . . .8
VCRs, Connecting for Tape Copying . .6
VID1 Indicator . . . . . . . . . . . . . . . . . . . . .28
Warranty, Limited . . . . . . . . . . . . . . . . .32
Watch One Channel While
Recording Another . . . . . . . . . . . . .18
XPR Recording . . . . . . . . . . . . . . . . . . . .19
Zero Search Feature . . . . . . . . . . . . . . . .16
ZERO SEARCH Menu . . . . . . . . . . . . . .16
Feature . . . . . . . . . . . . . . . . . . . . . . . .8
SLP Speed . . . . . . . . . . . . . . . . . . . . . . . .17
Solving Problems . . . . . . . . . . . . . . .30-31
SP Speed . . . . . . . . . . . . . . . . . . . . . . . . .17
33
Download from Www.Somanuals.com. All Manuals Search And Download.
For your nearest Authorized Servicenter
call toll-free in the U.S.A.
1-800-336-1900
Canadian Consumers Ð
Your toll free numbers are:
English: 1-800-522-0338
French: 1-800-522-0445
If you would like a copy of this manual in French, please follow the
instructions below:
Si un livret d’instructions en français n’est pas inclus avec votre appareil, vous
pouvez en obtenir un (indiquer le numéro de modèle, votre nom, et votre
adresse) en vous adressant à:
Thomson Consumer Electronics
Attention: Canadian Operations
P.O. Box 0944
Indianapolis, IN 46206-0944
If your VCR needs service, please contact your dealer
or the nearest Servicenter from the yellow pages.
Please do not send any products to the Indianapolis
address listed in this manual or on the carton. This
will only add delays in service for your product.
10330 North Meridian Street
Indianapolis, IN 46290-1024
©1996 Thomson Consumer Electronics, Inc.
Trademark(s)¨ Registered
Marca(s) Registrada(s)
Printed in Korea
Part Number 96-VR348-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|