RCA Portable CD Player RCD179 User Guide

v1.0 (EN/F)  
Consult the dealer or an experi-  
enced radio/TV technician for help.  
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE  
FCC information  
This device complies with part 15 of  
the FCC Rules. Operation is subject  
to the following two conditions: (1)  
This device may not cause harmful  
interference, and (2) this device must  
accept any interference received, in-  
cluding interference that may cause  
undesired operation.  
WARNING: Changes or modifications  
to this unit not expressly approved by  
the party responsible for compliance  
could void the user's authority to  
operate the equipment.  
IMPORTANT SAFETY INSTRUCTIONS  
Some of the following informa-  
plug is damaged, liquid has  
been spilled or objects have  
fallen into the apparatus, the  
apparatus has been exposed  
to rain or moisture, does not  
operate normally, or has been  
dropped.  
IF YOUR PRODUCT OPERATES  
ON BATTERIES, adhere to the  
following precautions:  
Important Battery Precautions  
plug does not fit into your  
outlet, consult an electrician  
for replacement of the obso-  
lete outlet.  
Protect the power cord from  
being walked on or pinched  
particularly at plugs, conve-  
nience receptacles, and the  
point where they exit from the  
apparatus.  
user manual  
guide de l’utilisateur  
tion may not apply to your par-  
ticular product; however, as with  
any electronic product, precau-  
tions should be observed during  
handling and use.  
Any battery may present a risk  
of fire, explosion, or chemical  
burn if abused. Do not try to  
charge a battery that is not  
intended to be recharged, do  
not incinerate, and do not  
puncture.  
This product complies with DHHS  
Rules 21 CFR Subchapter J. Appli-  
cable at the date of manufacture.  
This equipment has been tested and  
found to comply with the limits for  
a Class B digital device, pursuant to  
part 15 of the FCC Rules. These limits  
are designed to provide reasonable  
protection against harmful interfer-  
ence in a residential installation.  
This equipment generates, uses and  
can radiate radio frequency energy  
and, if not installed and used in ac-  
cordance with the instructions, may  
cause harmful interference to radio  
communications.  
However, there is no guarantee  
that interference will not occur in a  
particular installation. If this equip-  
ment does cause harmful interfer-  
ence to radio or television reception,  
which can be determined by turning  
the equipment off and on, the user  
is encouraged to try to correct the  
interference by one or more of the  
following measures:  
RCD179  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near  
water.  
Non-rechargeable batteries,  
such as alkaline batteries, may  
leak if left in your product for  
a long period of time. Remove  
the batteries from the product  
if you are not going to use it  
for a month or more.  
For your safety  
The AC power plug is  
A. Any battery may leak  
Only use attachments/accesso-  
ries specified by the manufac-  
turer.  
Use only with the  
cart, stand, tri-  
polarized (one blade is  
wider than the other)  
and only fits into AC  
power outlets one way.  
electrolyte if mixed with a dif-  
ferent battery type, if inserted  
incorrectly, or if all batteries  
are not replaced at the same  
time.  
Clean only with dry cloth.  
Do not block any ventilation  
openings. Install in accordance  
with the manufacturer’s in-  
structions.  
If the plug won’t go  
into the outlet completely, turn the  
plug over and try to insert it the  
other way. If it still won’t fit, contact  
a qualified electrician to change the  
outlet, or use a different one. Do not  
attempt to bypass this safety feature.  
If your product uses more  
than one battery, do not mix  
types and make sure they are  
inserted correctly. Mixing types  
or inserting incorrectly may  
cause them to leak.  
Discard any leaky or deformed  
battery immediately. They  
may cause skin burns or other  
personal injury.  
pod, bracket, or  
B. Any battery may leak elec-  
trolyte or explode if disposed  
of in fire or an attempt is  
made to charge a battery not  
intended to be recharged.  
C. Discard leaky batteries  
immediately. Leaking batter-  
ies can cause skin burns or  
other personal injury. When  
discarding batteries, be sure to  
dispose of them in the proper  
manner, according to provin-  
cial and local regulations.  
table specified by  
the manufacturer,  
or sold with the  
apparatus. When  
PRESET/FOLDER  
Do not install near any heat  
sources such as radiators, heat  
registers, stoves, or other ap-  
paratus (including amplifiers)  
that produce heat.  
Do not defeat the safety  
purpose of the polarized or  
grounding-type plug. A polar-  
ized plug has two blades with  
one wider than the other. A  
grounding type plug has two  
blades and a third grounding  
prong. The wide blade or the  
third prong is provided for  
your safety. If the provided  
Portable Cart  
Warning  
a cart is used, use caution  
when moving the cart/appara-  
tus combination to avoid injury  
from tip-over.  
Unplug this apparatus during  
lightning storms or when un-  
used for long periods of time.  
Refer all servicing to qualified  
service personnel. Servicing is  
required when the apparatus  
has been damaged in any way,  
such as power-supply cord or  
CAUTION: TO PREVENT ELECTRIC  
SHOCK, MATCH WIDE BLADE OF  
PLUG TO WIDE SLOT, FULLY INSERT.  
SD/MMC  
WARNING: MAINS PLUG IS USED  
AS DISCONNECT DEVICE AND IT  
SHOULD REMAIN READILY OPERABLE  
DURING INTENDED USE. IN ORDER TO  
DISCONNECT THE MAINS PLUG FROM  
MAINS COMPLETELY, THE MAINS  
PLUG SHOULD BE DISCONNECTED  
FROM THE MAINS SOCKET OUTLET  
COMPLETELY.  
Batteries shall not be exposed  
to excessive heat such as sun-  
shine, fire or the like.  
Please help to protect the  
environment by recycling or  
disposing of batteries accord-  
ing to federal, state, and local  
regulations.  
Note: Look in the battery compartment to find the AC power cord.  
Remarque : Regardez dans le compartiment des piles pour trouver le cordon  
d’alimentation CA.  
Reorient or relocate the receiving  
antenna.  
Increase the separation between  
the equipment and receiver.  
Connect the equipment into an out-  
let on a circuit different from that  
to which the receiver is connected.  
EN/F  
It is important to read this instruction prior to using your new product for the first time.  
Nous vous recommandons de lire ce manuel d’instructions avant d’utiliser votre  
nouveau produit pour la première fois.  
Technical information  
Product: Portable CD PLL Radio  
Cassette Recorder  
Brand: RCA  
Model: RCD179  
Power Supply: 120V ~ 60Hz  
Power Consumption: 15 Watts  
Unit Size ( H x W x D inches):  
6.2 x 14.7 x 10.2  
Weight: 5.77 lbs  
CD player: Response curve (+/- 2dB):  
60Hz to 20 kHz  
For your records  
General controls (Main unit)  
Before you begin  
In the event that service should be  
required, you may need the model  
number. In the space below, record  
the date and place of purchase:  
Model No.  
Safety precautions  
AC power  
to be dismantled by qualified  
technicians only.  
ON / STANDBY – Turns the unit  
on / off.  
PRESET/FOLDER  
preset radio channels; selects  
folders on mp3 disc, memory card  
or USB device.  
SOURCE – Selects among radio,  
tape, CD, AUX, USB and Card  
modes.  
VOLUME  
– Adjusts volume.  
Headset safety  
Never open the cabinet under  
any circumstances. Any repairs  
or internal adjustments should  
be made only by a trained  
technician.  
Do not touch the player with  
wet hands. If any liquid enters  
the player cabinet, take the  
player to a trained technician  
for inspection.  
This compact disc player uses  
a laser to read the music on  
the disc. The laser mechanism  
corresponds to the cartridge  
and stylus of a record player.  
Although this product incorpo-  
rates a laser pick-up lens, it is  
completely safe when operated  
according to directions.  
Plug the power supply cord into  
the AC power jack on the back of  
the unit, and into an AC power  
supply outlet that accepts the plug  
supplied with your unit.  
Have a Blast-  
Never leave the tray open  
as dust could cover the laser  
lens and/or the tray could be  
bumped into accidentally.  
Do not place the system near  
wet areas such as bathrooms  
and pool side. Avoid storing  
the system at humid places or  
near abnormally heated areas.  
Power is continuously supplied  
to the system. To disconnect  
power completely, unplug the  
mains plug from the power  
outlet.  
Ensure minimum distance  
around the apparatus for suffi-  
cient ventilation. The ventila-  
tion should not be impeded  
by covering the ventilation  
openings with items, such as  
newspaper, etc.  
– Accesses  
PUSH OPEN – Opens the CD door.  
PUSH TO CLOSE – Push to close  
the CD door.  
AUX IN – Connects external  
device with an audio cable (not  
provided).  
PHONE – connects headphone.  
– connects USB device.  
SD/MMC - connects SD/MMC  
memory card.  
Just Not in your  
eardrums! Make  
sure you turn down  
the volume on the  
Date of Purchase  
Place of Purchase  
Service information  
unit before you put on head-  
phones. Increase the volume  
to the desired level only after  
headphones are in place.  
Do not play your headset at  
high volume. Hearing experts  
warn against extended high-  
volume play.  
This product should be serviced  
only by those specially trained in  
appropriate servicing techniques.  
For instructions on how to obtain  
service, refer to the warranty  
included in this Guide.  
Battery power  
You can insert 6 D-sized alkaline  
batteries (not supplied) and you  
can take your stereo just about  
anywhere. Open the battery  
compartment door on the back of  
the unit by pressing down on the  
arrow and pulling out the cover.  
Insert batteries in the battery  
compartment.  
Rating Plate: Look for it at the  
bottom of the set.  
TRACK / TUNE  
/
– Tunes  
up or down radio frequency (radio  
mode); searches/ skips track/file  
backward or forward (CD/Card/  
CLASS 1 LASER PRODUCT  
LASER KLASSE 1  
APPAREIL A LASER DE CLASSE 1  
LUOKAN 1 LASERLAITE  
USB mode)  
STOP – Stops playback.  
.
Cassette Player  
If you experience ringing in  
your ears, reduce volume or  
discontinue use.  
You should use with extreme  
caution or temporarily  
discontinue use in potentially  
hazardous situations.  
KLASS 1 LASERAPP ARAT  
344A2555-0001  
REC – Starts tape recording.  
PLAY – Starts tape playback.  
REW – Rewinds tape.  
PLAY / PAUSE  
– Starts or  
pauses playback.  
FWD – Fast forwards tape.  
STOP/EJECT – Stops tape play-  
back, winding or recording, opens  
cassette door.  
Useful advice  
PROGRAM – Sets radio preset  
channels (radio mode); enters pro-  
gram mode (CD/Card/USB mode).  
BAND / MODE – Selects radio  
band (radio mode); selects among  
playback modes (repeat 1 / repeat  
CAUTION  
The apparatus shall not be ex-  
posed to dripping or splashing  
and that no objects filled with  
liquids, such as vases, shall be  
placed on the apparatus.  
Do not use your system im-  
mediately after transporting it  
from a cold place to a warm  
place, as condensation may  
cause the system to malfunc-  
tion. If moisture forms inside  
this system, it may not oper-  
ate properly. To correct the  
problem, turn off the power  
and wait about 30 minutes for  
moisture to evaporate.  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
Even if your headset is an  
open-air designed to let you  
to hear outside sounds, do not  
turn up the volume so high  
that you are unable to hear  
what is around you.  
THE LIGHTNING  
FLASH AND  
ARROWHEAD WITHIN  
THE TRIANGLE IS A  
WARNING SIGN  
ALERTING YOU OF  
"DANGEROUS  
THE EXCLAMATION  
POINT WITHIN THE  
TRIANGLE IS A  
WARNING SIGN  
ALERTING YOU OF  
IMPORTANT  
INSTRUCTIONS  
ACCOMPANYING  
THE PRODUCT.  
CAUTION: TO REDUCE THE  
RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER (OR  
BACK). NO USER-  
SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO  
QUALIFIED SERVICE  
PAUSE – Pauses tape playback.  
No naked flame source, such  
as lighted candles, should be  
placed on the apparatus.  
Attention should be paid to  
environment aspects of battery  
disposal.  
all / random) (CD/Card/USB mode)  
.
VOLTAGE" INSIDE THE  
PRODUCT.  
EQ / DBBS – Press to select among  
sound effects (Flat / Rock / Jazz  
/ Pop / Classic); press and hold  
to turn DBBS (digital bass boost  
system) On/Off.  
PERSONNEL.  
SEE MARKING ON BOTTOM / BACK OF PRODUCT  
TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD,  
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.  
WARNING:  
This system is fitted with a  
laser. To avoid accidents, it is  
General controls (Remote & Display)  
Radio  
CD player  
Setting preset stations  
manually  
1. In radio mode, press BAND /  
MODE to select radio band.  
Loading disc  
from the first track of the  
selected folder.  
– Turns the unit on / off.  
BAND/MODE – Select radio mode or a CD playback  
mode.  
This unit is compatible  
with audio CD-R/RW discs.  
Programming  
Select radio mode  
1. Press the PUSH OPEN button  
to slide disc tray out.  
1. In stop mode, press PROGRAM  
to enter program setting mode.  
The program location and pro-  
gram icon flash on the display.  
Press  
ON / STANDBY to turn on  
BAND/  
MODE  
the unit.  
Press SOURCE until RADIO mode  
is selected.  
Notes on CD-R/RW  
When mp3 disc is loaded and  
playback is in progress:  
2. Place a disc on the disc tray  
with the label side facing up.  
3. Push the disc tray back in.  
PRESET/FOLDER  
– Accesses preset radio  
EQ  
Do not affix any type of labels  
to either side (recordable or  
labeled side) of a CD-R/RW disc  
as this may result in the unit  
malfunctioning.  
To avoid damages to the CD-R/  
RW disc, do not open the disc  
compartment door while the  
disc is being read.  
Playback capability for CD-RW  
discs may vary due to varia-  
tions in the quality of the CD-  
RW disc and the recorder used  
to create the disc.  
+
BASS  
channels. Selects folders on mp3 disc, memory card  
or USB device.  
VOLUME +/– – Adjusts volume.  
EQ/BASS – Selects among sound effects; press and  
hold to turn DBBS on/off. (same function as EQ/  
DBBS)  
SOURCE – selects an input source (e.g. CD, radio).  
PROG – Sets radio preset channels and enters pro-  
gram mode. (same function as PROGRAM)  
2. Press  
/
to select the sta-  
VOLUME  
1. Press  
PRESET/FOLDER  
2. Press  
track you want to program.  
For mp3 disc, press PRESET/  
to first select the  
/
to select the  
tion to save as a preset station.  
3. Press PROGRAM. Program icon  
flashes.  
PROG  
to show the current folder  
number.  
Select radio band  
Press BAND / MODE to select  
between FM and AM band.  
The total number of tracks on the  
disc can be read from display.  
2. Press  
PRESET/FOLDER  
to  
FOLDER  
4. Press  
PRESET/FOLDER  
select another folder. Playback  
will start automatically from  
the first track of the selected  
folder.  
desired folder before selecting  
a track.  
3. Press PROGRAM again to con-  
firm your selection and access  
the next program location.  
repeatedly to assign the preset  
station number.  
5. Press PROGRAM to confirm.  
Program icon stops flashing.  
6. Repeat steps 2 to 5 to set ad-  
ditional preset stations.  
Play and pause  
1. In stop mode, press  
begin CD playback.  
2. During CD playback, press  
to pause playback. Press again  
to resume.  
Extend or reposition the  
antenna for better FM  
reception. Rotate the  
Remove the plastic tab  
from the battery  
compartment before  
first use. One button  
type battery (CR2025) is  
required.  
to  
/
– selects tracks/files and radio frequencies.  
4. Repeat steps 2 to 3 to program  
to a maximum of 20 tracks.  
unit for better AM reception.  
Stop playback  
Press to stop playback.  
– starts or pauses playback.  
– stops playback.  
5. Press  
in program mode  
There are 10 preset loca-  
tions for FM band and  
10 preset location for  
AM band on this unit.  
to start program playback  
(PROGRAM indicator lights on  
the display).  
Repeat mode  
Skip and search  
Tuning to a station  
Play mode  
Press BAND / MODE to select  
among playback mode (repeat  
current track / repeat all /  
random). Selection made is  
indicated by icons on display.  
REPEAT 1 - repeat current track  
REPEAT ALL - repeat whole disc  
File type (mp3/WMA)  
Card mode  
1. Press  
/
to skip to the  
mp3 playback  
This player can play mp3 files  
storead on a CD.  
Press  
to tune down radio  
previous or next track respec-  
tively.  
2. Press and hold  
search quickly current track  
backward or forward respec-  
tively.  
frequency.  
Press to return to stop  
mode.  
Press  
to tune up radio  
/
to  
frequency.  
Preset EQ  
WMA  
FOLDER  
Digital  
Bass Boost  
System  
USB  
Selecting CD mode  
When the unit is on, press SOURCE  
until CD mode is selected.  
settings:  
Rock, Jazz,  
Pop, Classic  
Using presets  
1. Press BAND / MODE to select  
between bands.  
Press and hold  
/
to automatically tune to  
the next station.  
2. Press  
PRESET/FOLDER  
When mp3 disc is loaded and  
playback is stopped:  
Random  
Playback  
repeatedly to access the  
desired preset stations.  
1. Press  
PRESET/FOLDER  
to  
select a folder.  
Shows radio frequency, radio preset location, folder number, CD track  
number, CD program location, playback time, current mode, etc.  
2. Press  
to start playback  
Tape player  
Troubleshooting tips  
CD player  
USB and memory card  
scratches, or other damage.  
Check for vibration or shock  
that may affect the unit; move  
the set if necessary.  
Playing mp3 files stored  
on USB device or memory  
card  
1. Connect the USB device or  
SD/MMC memory card to the  
corresponding connection slot  
on the front of the unit.  
2. Press SOURCE until the  
Recording to tape  
Programming  
Refe to “Programming” in the  
“CD player” section for details.  
System doesn’t turn on  
Displaying program list  
In program stop mode, press  
and hold PROGRAM for about 3  
seconds to display the program  
list.  
Playing a tape  
Unplug the unit for a moment,  
and then plug it back in.  
Check the outlet by plugging  
in another devices.  
1. Insert a tape into the deck.  
1. When the unit is on, press  
SOURCE until TAPE mode is  
selected. The tape indicator  
2. Press SOURCE (CD, Radio, USB,  
AUX or Card)  
Refer to relevant sections in  
this user manual to select the  
file, track, program or radio  
station to be recorded.  
” lights on the display.  
Remote control does not work  
Check that battery is properly  
installed.  
Replace weak battery.  
Point the remote directly at  
the unit’s front panel.  
Remove any obstacles between  
the remote and the unit.  
2. Press STOP/EJECT to open the  
tape deck door.  
3. Insert a tape into the door and  
push the door closed.  
4. Press REW or FWD to wind  
the tape to the desired start-  
ing position. Press STOP/EJECT  
to stop winding.  
No sound  
Clearing program list  
Your program will be erased:  
Adjust volume setting.  
Make sure you’ve selected the  
correct function.  
once you open the disc  
compartment door, or,  
press while the program  
playback is stopped.  
3. Start playback of the desired  
file, track or program.  
4. Press REC and PLAY together  
to begin recording.  
5. Press PAUSE or STOP to pause or  
stop the recording respectively.  
indicator "  
mode) or "  
" (for USB  
" (for Card  
mode) lights on the display.  
Poor radio reception  
3. Press  
to start playback  
from the USB device or SD/  
MMC memory card.  
Adjust the antenna for better  
reception.  
5. Press PLAY to start playback.  
Try turning off electrical ap-  
pliances near the unit, such as  
hair dryers, vacuum cleaners,  
or fluorescent lights.  
Press PAUSE to pause playback  
(press again to release the but-  
ton to resume playback).  
Press STOP/EJECT to stop  
playback.  
ESD Remark:  
Auxiliary input  
4. Press  
/
to skip to  
In case of misfunction due to  
electrostatic discharge just reset  
the product (disconnect and  
reconnect of the power source  
may be required) to resume  
normal operation.  
the previous or next file  
respectively.  
1. Connect the auxiliary device to  
the AUX IN jack with an audio  
cable (not provided).  
Do not turn the volume of the  
auxiliary device too high as this  
may affect the sound quality.  
For other playback operations,  
control them on your auxiliary  
device.  
If folders exist, press  
PRESET/FOLDER  
to show  
CD doesn’t play  
the current folder number.  
2. Press SOURCE until the  
Make sure you’ve put a CD in  
the tray.  
Be sure to slide the  
cassette into the tape  
slot on the door.  
Press  
PRESET/FOLDER  
to  
indicator “  
the display.  
” lights on  
select another folder. Playback  
will start automatically from  
the first track of the selected  
folder.  
Make sure the CD’s label is fac-  
ing up.  
3. Start playback from the  
auxiliary device.  
4. Adjust the auxiliary device to  
mid-range volume and adjust  
the the master volume by  
Do not place the tape  
directly onto the tape  
mechanism.  
Try another CD.  
Make sure that Pause mode is  
not activated.  
5. Press and hold  
/
For better recording  
quality, use normal bias  
tape (Type I) only.  
to search quickly current  
file backward or forward  
respectively.  
Make sure CD function is  
selected.  
pressing  
VOLUME  
.
6. Press to stop playback.  
CD sound skips  
Clean the CD.  
Check CD for warping,  
Limited warranty  
More information  
Cleaning the exterior  
violation of instructions provided with the product, or to product which has been  
altered or modified without authorization of AVC, or to products or parts thereof  
which have had the serial number removed or changed.  
Important:  
Cleaning CDs  
AVC MULTIMEDIA (“AVC”) makes the following limited warranty. This limited  
warranty extend to the original consumer purchaser and is limited to non-commercial  
use of the product.  
Disconnect the system from AC  
power before cleaning the exterior  
of the unit with a soft dust cloth  
Clean the exterior with a soft clean  
cloth or slightly moistened chamois  
leather. DO NOT use solvents as it  
Dirty CDs can cause poor sound  
quality. Always keep CDs clean by  
wiping them gently with a soft  
cloth from the inner edge toward  
the outer perimeter.  
Also keep your "Bill of Sale" as proof of purchase.  
Model no. ..............................................................................  
Product name ...................................................................................  
Type of set .................................................................................  
Serial no. ..................................................................................  
Invoice no. ........................................................................  
Date purchased ..........................................................................  
Dealer name ..........................................................................  
Out of Warranty  
One Year Parts & Labor Warranty  
All warranties implied by state law, including the implied warranties of merchantability  
and fitness for a particular purpose, are expressly limited to the duration of the  
limited warranties set forth above. With the exception of any warranties implied by  
state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other  
warranties, guarantees, agreements and similar obligations of manufacturer or seller  
with respect to the repair or replacement of any parts. In no event shall AVC be liable  
for consequential or incidental damages.  
AVC products purchased in the United States are warranted to be free from defects in  
materials or workmanship for a period of one year from the date of their original retail  
purchase. If the unit fails to conform to this warranty, we will service the product using  
new or refurbished parts and products, at AVC’s sole discretion.  
If a CD becomes dirty, wet a soft  
cloth in water, wring it out well,  
wipe the dirt away gently, and then  
remove any water drops with a dry  
cloth.  
Do not use record cleaning sprays or  
antistatic agents on CDs. Also, never  
clean CDs with benzene, thinner, or  
other volatile solvents which may  
cause damage to disc surface.  
may cause damage to the unit.  
Handling CDs  
During a period of one year from the effective warranty date, AVC will provide,  
when needed, service labor to repair a manufacturing defect at its designated  
Service Center. To obtain warranty service in the Untied States, you must first call our  
Customer Support Center at 1-866-444-5746 or 1-800-252-6123, during the  
hours listed in the box on the right. The determination of service will be made by  
AVC Customer Support. PLEASE DO NOT RETURN YOUR UNIT TO AVC WITHOUT  
PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or  
products will be used for repairs by AVC at its designated Service Center for one year  
from the effective warranty date. Such replacement parts or products are warranted  
for an additional one year from the date of repair or replacement. The Customer  
will be required to ship the unit to the Service Center indicated at the time Customer  
Support is contacted to make the necessary repairs. The customer is responsible for all  
transportation charges to the service facility.  
Do not touch the signal surfaces.  
Hold CDs by the edges, or by one  
edge and the hole.  
Do not affix labels or adhesive tapes  
to the label surfaces. Do not scratch  
or damage the label.  
CDs rotate at high speeds inside  
the player. Do not use damaged  
(cracked or warped) CDs  
Make sure CDs are stored in their  
original case after use. Keep them  
away from damp, humid or abnor-  
No person, agent, distributor, dealer or company is authorized to change, modify or  
extend the terms of these warranties in any manner whatsoever. The time within action  
must be commenced to enforce any obligation of AVC arising under the warranty or  
under any statute, or law of the United States or any state thereof, is hereby limited  
to one year from the date of purchase. This limitation does not apply to implied  
warranties arising under state law.  
Cassettes  
FOR SERVICE AND REPAIR, PLEASE VISIT  
To protect your  
www.1800customersupport.com/RCA  
This warranty gives you specific legal rights and you may also have other rights, which  
may vary, from state to state. Some states do not allow limitation on how long an  
implied warranty lasts, when an action may be brought, or the exclusion or limitation  
of incidental or consequential damages, so the above provisions may not apply to you.  
recordings  
from accidental  
erasure on one  
or both sides  
of your cassette, snap out the tab  
at the top of the cassette. If you  
decide later to record on the tape,  
seal the hole with a piece of adhe-  
sive tape. (Refer to diagram)  
mally heated places.  
Specifications and external appearance are subject to change without  
notice.  
Packaging and Shipping Instruction  
When you send the product to the AVC service facility you must use the original carton box  
and packing material or an equivalent as designated by AVC.  
For more information on other products and services, please visit our web site at  
www.1800customersupport.com/RCA  
CD lens care  
When your CD lens gets dirty it can  
also cause the system to output  
poor sound quality. To clean the  
lens you will need to purchase a  
CD lens cleaner which can maintain  
the output sound quality of your  
system. For instructions on cleaning  
the CD lens, refer to the ones ac-  
In the event your product requires repair after the limited warranty period  
has expired, please contact our Customer Support Center at 1-866-444-5746,  
1-800-252-6123 or www.1800customersupport.com/RCA  
LIMITED WARRANTY  
IMPORTER  
AVC Multimedia,  
170 Esna Park, Unit 6, Markham,  
Ontario L3R 1E3 Canada  
© 2008 AVC Multimedia  
http: //www.1800customersupport.com/RCA  
Quit Slacking - A little bit of slack  
in your tapes can cause scratches  
on the tape, or worse yet, the tape  
could break. If you notice some  
slack in the tape, use a pencil to  
Your Responsibility  
Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm,  
Saturday: 9am–NOON Eastern time.  
1) You must retain the original sale receipt to provide proof of purchase.  
2) These warranties are effective only if the product is purchased and operated in  
the U.S.A. or Canada.  
3) Warranties extend only to defects in material or workmanship, and do not extend  
to any product or parts which have been lost or discarded, or damage to product  
or parts caused by misuse, accident, improper operation or maintenance, or use in  
Important:  
You are responsible for any transportation, shipping or insurance relative to the  
return of product to our Product Returns Center.  
tighten it up before you insert it.  
companying the lens cleaner.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Raymarine Fish Finder L470 User Guide
RCA IP Phone IP120 User Guide
RCA Network Hardware ANT700R User Guide
Rheem Water Heater 81VR120 1 User Guide
Roland Electronic Keyboard FR 1 User Guide
Rosewill Power Supply RU101 User Guide
Russell Hobbs Washer RH1042 User Guide
Russound Stereo Receiver ST2 XM2 User Guide
Ryobi Pole Saw UT15520C User Guide
Samsung TV Video Accessories STNL3257D User Guide