v1.0 (EN/E)
•
•
Reorient or relocate the receiv-
ing antenna.
Increase the separation
between the equipment and
receiver.
Connect the equipment into
an outlet on a circuit differ-
ent from that to which the
receiver is connected.
Consult the dealer or an expe-
rienced radio/TV technician for
help.
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
FCC information
This device complies with Part
15 of the FCC Rules. Operation
is subject to the following two
conditions: (1) This device may not
cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause unde-
sired operation.
IMPORTANT SAFETY INSTRUCTIONS
Some of the following information may
not apply to your particular product;
however, as with any electronic product,
precautions should be observed during
handling and use.
•
Route power cord to prevent it
from being pinched, or walked on,
or melted by a hot stove or radiator.
To clean cabinet, unplug AC power
cord, then use a soft cloth damp-
ened only with water.
Do not place lighted candles, ciga-
rettes, cigars, etc. on the product.
Unplug AC power cord from outlet
during a lightning storm or when
product is left unused for a long pe-
riod of time to prevent damage due
to lightning or power line surges.
Care should be taken so that objects
do not fall and liquids do not spill
into the product.
surfaces may cause the appliance
and cart combination to overturn.
Damage Requiring Service –This
product should be serviced by quali-
fied service personnel when:
A. The power supply cord or the
plug has been damaged; or
B. Objects have fallen, or liquid has
been spilled into the product; or
C. The product has been exposed to
rain; or
D. The product does not appear
to operate normally or exhibits a
marked change in performance; or
E. The product has been dropped,
or the cabinet damaged.
an attempt is made to charge a bat-
tery not intended to be recharged.
C. Discard leaky batteries immedi-
ately. Leaking batteries can cause
skin burns or other personal injury.
When discarding batteries, be sure
to dispose of them in the proper
manner, according to provincial and
local regulations.
user manual
manual de usuario
•
•
•
•
•
Before using the product, please
follow and adhere to all warnings,
safety and operating instructions
located on the product and in the
user book. Save all instructions for
future reference.
•
•
RCD045
This equipment has been tested
and found to comply with the
limits for a Class B digital device,
pursuant to Part 15 of FCC Rules.
These limits are designed to
provide reasonable protection
against harmful interference in a
residential installation. This equip-
ment generates, uses, and can
radiate radio frequency energy
and, if not installed and used in
accordance with the instructions,
may cause harmful interference to
radio communications.
However, there is no guarantee
that interference will not occur
in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be deter-
mined by turning the equipment
off and on, the user is encouraged
to try to correct the interference
by one or more of the following
measures:
Important Battery Precautions
•
•
Do not expose product to rain and
do not use near water; such as, sink,
wet basement, swimming pools, etc.
Always leave sufficient space around
the product for ventilation. Do
not place product in or on a bed,
rug, bookcase or cabinet that may
prevent air flow through vent open-
ings.
Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user’s authority to oper-
ate the equipment.
•
•
•
Any battery may present a risk of
fire, explosion, or chemical burn
if abused. Do not try to charge a
battery that is not intended to be
recharged, do not incinerate, and
do not puncture.
Non-rechargeable batteries, such as
alkaline batteries, may leak if left in
your product for a long period of
time. Remove the batteries from the
product if you are not going to use
it for a month or more.
If your product uses more than one
battery, do not mix types and make
sure they are inserted correctly.
Mixing types or inserting incorrectly
may cause them to leak.
Discard any leaky or deformed bat-
tery immediately. They may cause
skin burns or other personal injury.
Please help to protect the environ-
ment by recycling or disposing of
batteries according to federal, state,
and local regulations.
•
•
•
•
Never add accessories that the
product has not been designed to
accommodate.
Use only the manufacturer’s ap-
proved mounting instructions and
hardware when installing product.
Do not attempt to disassemble
the cabinet. This product does not
contain customer serviceable compo-
nents.
•
When service or repairs are com-
pleted, ask the service technician to
perform the safety check described
in the service manual and to
confirm that replacement parts have
the same safety characteristics as
the original parts.
Overloading - Do not overload the
wall outlets, extension cords or inte-
gral convenience receptacles as this
can result in a risk of fire or electric
shock.
For your records
•
Do not expose product to extreme
temperatures such as found near
a hot radiator or stove, or in a car
parked in the Summer sun.
In the event that service should be
required, you may need the model
number and the serial number. In
the space below, record the date
and place of purchase and the
serial number:
•
•
•
•
Connect power cord only to AC
power source as marked on the
product.
•
•
Do not handle the unit or power
cord when your hands are wet or
damp
Some products employ a polarized
AC line plug (one blade is wider).
This is a safety feature. The plug
will go in the power outlet only
one way. If the plug doesn’t go into
the outlet completely, turn the plug
over and put it in the other way. If
it still doesn’t fit, contact a qualified
electrician to change the outlet. Do
not defeat the safety purpose of
the polarized plug.
Model No.:
Date of Purchase:
Place of Purchase:
Serial No.:
IF YOUR PRODUCT OPERATES ON
BATTERIES, adhere to the follow-
ing precautions:
•
•
Carts and Stands —
The appliance should
]
be used only with a
cart or stand that is
recommended by the
manufacturer.
An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
A. Any battery may leak electrolyte
if mixed with a different battery
type, if inserted incorrectly, or if all
batteries are not replaced at the
same time.
•
EN/E
B. Any battery may leak electrolyte
or explode if disposed of in fire or
It is important to read this instruction prior to using your new product for the first time.
Es importante leer este manual antes de usar por vez primera su equipo.
•
•
Minimum distances around
the apparatus for sufficient
ventilation.
The ventilation should not
be impeded by covering the
ventilation opening with items,
such as newspaper, table-
cloths, curtains, etc.
Service information
Technical information
Product: Portable CD Radio
Brand: RCA
Model: RCD045
Power Supply: 120V ~ 60Hz
Power Consumption: 15 Watts
Precautions
General controls
Before you begin
This product should be serviced
only by those specially trained in
appropriate servicing techniques.
For instructions on how to obtain
service, refer to the warranty
included in this user manual.
•
This compact disc player uses
a laser to read the music on
the disc. The laser mechanism
corresponds to the cartridge
and stylus of a record player.
Although this product
Top view
AC power
Battery power
Plug the power supply cord into
the AC power jack on the back of
the unit, and into an AC power
supply outlet that accepts the plug
supplied with your unit.
You can insert 6 C-sized alkaline
batteries (not supplied) and you
can take your stereo just about
anywhere.
FM antenna
Carrying handle
incorporates a laser pick-up
lens, it is completely safe
when operated according to
directions.
•
The rating plate is located
at the bottom cabinet of
apparatus.
The descriptions and characteristics in
this owner’s manual are for the purpose
of general reference only and not as a
guarantee. In order to provide you with
the highest quality product, we may
make changes or modifications without
prior notice. The English version serves
as the final reference on all product and
operational details should any discrep-
ancies arise in other languages.
•
Open the battery compartment
door on the bottom of the
unit by pressing down on the
tab and pulling out the cover.
Before inserting the batteries,
observe the polarities (that is,
+ and -) of the battery, then
relate the polarities to the
engraved diagram located on
the battery compartment door.
Insert batteries in the battery
compartment.
AC OUTLET POWER SUPPLY:
120V~60Hz
•
•
Discs rotate at high speed
inside the player. Do not use
damaged, warped, or cracked
discs.
Headset Safety
To use a headset safely, please
keep the following in mind:
•
The AC power plug is
polarized (one blade is
wider than the other)
and only fits into AC
Do not touch the pick-up lens
which is located inside the
disc compartment. To keep
dust from collecting on the
pick-up lens, do not leave the
compartment door open for
an extended period of time. If
the lens becomes dirty, clean
it with a soft brush, or use an
air blower brush designed for
camera lenses.
•
Do not play your headset at a
high volume. Hearing experts
advise against continuous
extended play.
If you experience ringing in
your ears, turn down the vol-
ume or stop using the headset.
Do not use a headset while
driving a motorized vehicle or
riding a bike. It may cause a
traffic hazard and is illegal in
many areas.
Even if your headset is an
open-air type designed to let
you hear outside sounds, don’t
turn up the volume so high
that can’t hear sounds around
you.
power outlets one way.
BAND AM/FM – Selects AM or FM band.
TUNING – Selects radio frequency.
/ CD / RADIO / OFF – Selects operation mode. To switch off the unit,
select OFF.
PROG. – Enters CD program mode.
MODE – Selects playback modes.
BASS – Turns bass boost on and off.
VOL. – Adjusts volume.
PUSH TO OPEN - Push to open the mp3 device storage compartment
door. Push the door to close it.
If the plug will not go into the
outlet completely, turn the plug
over and try to insert it the other
way. If it still does not fit, contact
a qualified electrician to change
the outlet, or use a different one.
Do not attempt to bypass this
safety feature.
•
•
Note that the AC line cord must
be unplugged from the jack on
the back of the unit to operate on
batteries.
•
Power is fed to the unit even
when it is not functioning. To cut
the power supply off, the power
cable must be unplugged.
WARNING:
TO PREVENT FIRE OR ELECTRICAL
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
Radio
mp3 input
General controls
Display
Front view
Selecting radio mode
Slide the selection switch to RADIO
position to turn on the radio.
Selecting mp3 Input
Slide the selection switch to
position. An mp3 player icon
shows on the display.
Connecting mp3 Player
1. Open the mp3 storage
compartment by pushing PUSH
TO OPEN on the top of the
player.
Extend or reposition the
antenna for better FM
reception. Rotate the
unit for better AM reception.
2. Insert the audio cable into the
mp3 player’s headphone jack
and start playback of the mp3
player.
Selecting radio band
Slide the BAND AM/FM switch to
select FM or AM band.
3. Close the storage compartment.
Adjust the mp3 player
1. Program mode is activated.
2. Repeat mode is activated.
3. Random mode is activated.
4. Playback in progress.
5. Displays CD track information.
6. AUX mode is selected for connecting with mp3 player
– In CD mode – goes back to the previous track or searches backward.
– Starts and pauses playback.
– In CD mode – goes to the next track or searches forward.
– In CD mode – stops playback.
to midrange volume and
adjust the master volume
by rotating VOL. knob on the
unit. Do not turn the volume
of the mp3 player too high
as this may affect the sound
quality. For other playback
operations, control them on
your mp3 player.
PUSH TO OPEN – Opens disc tray. Push the disc tray to close it.
Tuning to a station
Turn the TUNING knob to select
radio frequencies.
Back view
AC ~ IN – Insert the power cord here.
Sound feature
Bass Boost system
Press BASS to turn the digital bass boost system on or off.
Bottom view
OPEN – Push and slide to lift up the battery compartment door.
CD playback
Troubleshooting tips
More information
Skipping and searching
Selecting CD mode
Creating programs
System doesn’t turn on
Cleaning the exterior
Cleaning CDs
Displaying and editing
programs
In CD stop mode, press PROG.
repeatedly to recall and display
program. Program position
shows first, followed by track
number.
CD sound skips
•
Unplug the unit for a moment,
and then plug it back in
Check the outlet by plugging
in another device
1. Press
or
to skip to the
•
Disconnect the system from
AC power before cleaning the
exterior of the unit with a soft
dust cloth
•
•
•
Dirty CDs can cause poor sound
quality. Always keep CDs clean
by wiping them gently with a
soft cloth from the inner edge
toward the outer perimeter.
If a CD becomes dirty, wet a
soft cloth in water, wring it
out well, wipe the dirt away
gently, and then remove any
water drops with a dry cloth.
Do not use record cleaning
sprays or antistatic agents on
CDs. Also, never clean CDs with
benzene, thinner, or other
•
Clean the CD (as explained in
“Maintenance”)
Slide the selection switch to CD
previous or next track respec-
tively.
position.
•
The unit can program
up to 20 normal audio
CD tracks.
•
•
•
Check CD for warping,
scratches, or other damage
2. Press and hold
or
to
search quickly current track
backward or forward respec-
tively.
•
Clean the exterior with a soft
clean cloth or slightly moist-
ened chamois leather. DO NOT
use solvents as it may cause
damage to the unit.
•
In program mode,
RANDOM playback cannot
be selected.
No sound
No sound in
Ensure volume of the mp3
player is turned up
mode
•
•
Adjust volume setting
Make sure you’ve selected the
correct function
•
•
While track number is dis-
played, press
or
to edit
Loading music
1. Press the PUSH TO OPEN
button on the unit front to
slide disc tray out.
Stoping playback
Press to stop playback.
track number. Press PROG. to
store newly selected track.
1. In CD stop mode, press PROG.
to enter program mode.
The PROGRAM icon flashes on
the display. “P01” (first pro-
gram position) shows briefly
on the display followed by
“00” flashing.
ESD Remark:
Poor radio reception
In case of misfunction due to
electrostatic discharge just reset
the product (disconnect and
reconnect of the power source
may be required) to resume
normal operation.
Handling CDs
•
Adjust the antenna for better
reception
•
Do not touch the signal sur-
faces. Hold CDs by the edges,
or by one edge and the hole.
Do not affix labels or adhesive
tapes to the label surfaces.
Do not scratch or damage the
label.
2. Place a disc on the disc tray
with the label side facing up
and then push the disc tray
back in.
Playback mode
Deleting programs
Press in CD stop mode to delete
all the stored tracks.
In CD mode, press MODE
repeatedly to select among the
following playback modes with
icons show on the display :
•
Try turning off electrical ap-
pliances near the unit, such as
hair dryers, vacuum cleaners,
or fluorescent lights
volatile solvents which may
cause damage to disc surface.
•
2. Press
or
to select the
•
•
Opening the CD
•
REPEAT (flashes) - Repeats
current track.
REPEAT - Repeats all tracks.
- Random playback.
Playing and pausing
track to be stored.
3. Press PROG. to store the
selected track.
4. Repeat step 2 and 3 to
continue programming.
compartment door or
switching mode will
delete all the stored tracks.
The unit remains in program
mode once programming
track is done.
1. In stop mode, press
playback.
to begin
CD doesn’t play
•
•
CDs rotate at high speeds
inside the player. Do not use
damaged (cracked or warped)
CDs
Make sure CDs are stored in
their original case after use.
Keep them away from damp,
humid or abnormally heated
places.
•
•
•
•
Make sure you’ve put a CD in
the tray
•
The
icon is displayed.
No icon - Normal playback.
2. During playback, press
to
•
Make sure the CD’s label is fac-
ing up
pause playback. Press again to
resume.
5. Press
in program mode to
start program playback.
•
•
Try another CD
Make sure that Pause mode is
not activated
•
The
icon flashes in pause
mode.
•
Make sure CD function is
selected
Maintenance
Limited warranty
AVC MULTIMEDIA (“AVC”) makes the following limited warranty. This limited
warranty extend to the original consumer purchaser and is limited to non-
commercial use of the product.
LIMITED WARRANTY
Technical specifications
Power supply: 120V~60Hz
Dimensions (H x W x D mm):
Unit size - 153 x 335 x 236
Weight: 1.85 kg
CD player: Response curve (+/-
2dB): 60Hz to 20 kHz
Rating Plate: Look for it at the
bottom of the set.
CD lens Care
No person, agent, distributor, dealer or company is authorized to change, modify
or extend the terms of these warranties in any manner whatsoever. The time within
action must be commenced to enforce any obligation of AVC arising under the
warranty or under any statute, or law of the United States or any state thereof, is
hereby limited to one year from the date of purchase. This limitation does not apply
to implied warranties arising under state law.
Your Responsibility
•
When your CD lens gets dirty
it can also cause the system to
output poor sound quality. To
clean the lens you will need to
purchase a CD lens cleaner
1) You must retain the original sale receipt to provide proof of purchase.
2) These warranties are eꢀective only if the product is purchased and operated in
the U.S.A. or Canada.
3) Warranties extend only to defects in material or workmanship, and do not extend
to any product or parts which have been lost or discarded, or damage to product
or parts caused by misuse, accident, improper operation or maintenance, or use
in violation of instructions provided with the product, or to product which has
been altered or modiꢁed without authorization of AVC, or to products or parts
thereof which have had the serial number removed or changed.
One Year Parts & Labor Warranty
AVC products purchased in the United States are warranted to be free from defects
in materials or workmanship for a period of one year from the date of their original
retail purchase. If the unit fails to conform to this warranty, we will service the
product using new or refurbished parts and products, at AVC’s sole discretion.
which can maintain the output
sound quality of your system.
For instructions on cleaning
the CD lens, refer to the ones
accompanying the lens cleaner.
This warranty gives you speciꢁc legal rights and you may also have other rights,
which may vary, from state to state. Some states do not allow limitation on how
long an implied warranty lasts, when an action may be brought, or the exclusion
or limitation of incidental or consequential damages, so the above provisions may
not apply to you.
During a period of one year from the eꢀective warranty date, AVC will provide,
when needed, service labor to repair a manufacturing defect at its designated
Service Center. To obtain warranty service in the Untied States, you must ꢁrst call
our Customer Support Center at 1-866-444-5746 or 1-800-252-6123, during
the hours listed in the box on the right. The determination of service will be
made by AVC Customer Support. PLEASE DO NOT RETURN YOUR UNIT TO
AVC WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements
for defective parts or products will be used for repairs by AVC at its designated
Service Center for one year from the eꢀective warranty date. Such replacement
parts or products are warranted for an additional one year from the date of repair
or replacement. The Customer will be required to ship the unit to the Service Center
indicated at the time Customer Support is contacted to make the necessary repairs.
The customer is responsible for all transportation charges to the service facility.
Out of Warranty
For more information on other products and services, please visit our web site at
www.1800customersupport.com/RCA
In the event your product requires repair after the limited warranty period
has expired, please contact our Customer Support Center at 1-866-444-5746,
1-800-252-6123 or www.1800customersupport.com/RCA
Important:
Also keep your "Bill of Sale" as proof of purchase.
Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm,
Saturday: 9am–NOON Eastern time.
Model no. ........................................................ Product name .........................................................
Type of set ...............................................................................................................................................
Serial no. .......................................................... Invoice no. ................................................................
Date purchased ............................................. Dealer name ............................................................
Important:
You are responsible for any transportation, shipping or insurance relative to the
return of product to our Product Returns Center.
Packaging and Shipping Instruction
When you send the product to the AVC service facility you must use the original
carton box and packing material or an equivalent as designated by AVC.
All warranties implied by state law, including the implied warranties of merchant-
ability and ꢁtness for a particular purpose, are expressly limited to the duration of
the limited warranties set forth above. With the exception of any warranties implied
by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all
other warranties, guarantees, agreements and similar obligations of manufacturer
or seller with respect to the repair or replacement of any parts. In no event shall AVC
be liable for consequential or incidental damages.
IMPORTER
AVC Multimedia,
170 Esna Park, Unit 6, Markham,
Ontario L3R 1E3 Canada
FOR SERVICE AND REPAIR, PLEASE VISIT
www.1800customersupport.com/RCA
© 2008 AVC Multimedia
http: //www.1800customersupport.com/RCA
Speciꢁcations and external appearance are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
|