RCA Home Theater System RTB1100 User Guide

USER MANUAL  
RTB1100  
It's important to read this instruction prior to using your new product for the first time.  
English IB(A5).indd  
1
4/15/2010 20:19:09  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Information  
THE LIGHTNING FLASH AND ARROWHEAD  
WITHIN THE TRIANGLE IS A WARNING SIGN  
ALERTING YOU OF “DANGEROUS VOLTAGE”  
INSIDE THE PRODUCT.  
THE EXCLAMATION POINT WITHIN THE TRI-  
ANGLE IS A WARNING SIGN ALERTING YOU OF  
IMPORTANT INSTRUCTIONS ACCOMPANYING  
THE PRODUCT.  
SEE MARKING ON BACK OF PRODUCT  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR BACK).  
NO USER SERVICEABLE PARTS INSIDE. REFER  
SERVICING TO QUALIFIED SERVICE PERSON-  
NEL.  
WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT  
TO RAIN OR MOISTURE.  
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER  
THAN THOSE SPECIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.  
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH  
THE SAME OR EQUIVALENT TYPE.  
WARNING: TO BE COMPLETELY DISCONNECT THE POWER INPUT , THE MAINS PLUG OF APPARA-  
TUS SHALL BE DISCONNECTED FROM THE MAINS. THE MAINS PLUG OF APPARATUS SHOULD NOT  
BE OBSTRUCTED OR SHOULD BE EASILY ACCESSED DURING INTENDED USE.  
Service Information  
This product should be serviced only by those  
specially trained in appropriate servicing  
techniques.  
Main plug is used as the disconnect device,  
it shall remain operable and should not be  
obstructed during intended use. To be completely  
disconnectedtheapparatusfromsupplymains,the  
main plug of the apparatus shall be disconnected  
from the mains socket outlet completely.  
DVD Copy Protection  
In accordance with the DVD standard, your DVD  
player is equipped with a Copy Protection system,  
which can be switched on and off by the DVD  
disc itself, in order to make any recording of the  
relevant DVD disc onto a videotape of very poor  
picture quality, or even impossible. This product  
incorporates copyright protection technology  
that is protected by method claims of certain U.S.  
patents and other intellectual property rights  
owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection  
technology must be authorized by Macrovision  
Corporation, and is intended for home use only  
unless otherwise authorized by Macrovision  
Corporation Reverse engineering or disassembly  
is prohibited.  
Caution  
Invisible laser radiation when open and interlocks  
defeated. Avoid exposure to beam. Class 1 laser  
product.  
This system must be opened only by qualified  
technicians to prevent accidents caused by the  
laser beam.  
-2-  
English IB(A5).indd  
4
4/15/2010 20:19:10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Information  
Important Battery Information  
CAUTION:  
This product utilizes a laser. Use of controls or  
adjustments or performance of procedures other  
than those specified may result in hazardous  
radiation exposure. Do not open covers and do  
not repair yourself. Refer servicing to qualified  
personnel.  
Do not mix different types of batteries or new and  
old batteries. Do not use rechargeable batteries.  
In order to avoid any risk of explosion, observe  
the polarities indicated inside the battery  
compartment. Replace only with the type of  
batteries specified. Do not dispose of them in a  
fire or recharge them.  
This Class B digital apparatus complies  
with Canadian ICES-003.  
Cet appareil numérique de la classe B  
est conforme à la norme du NMB-003 du  
Canada.  
If you are not using the remote control for a long  
period of time, remove the batteries.  
Please respect the environment and  
prevailing regulations. Before you  
dispose of batteries or accumula-  
tors, ask your dealer whether they  
are subject to special recycling and  
if they will accept them for disposal.  
WARNING  
To reduce the risk of fire or electric shock,  
do not expose this product to rain or mois-  
ture. No objects filled with liquids, such as  
vases, should be placed on the apparatus.  
Illustrations contained in this document are for  
representation only.  
Double insulation when servic-  
ing use only identical replacement  
parts.  
CLASS 1 LASER PRODUCT  
APPAREIL À LASER DE CLASSE 1  
PRODUCTO LASER DE CLASE 1  
This product contains a low  
power laser device.  
-3-  
English IB(A5).indd  
5
4/15/2010 20:19:10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
Please Read and Save for Future Reference.  
Some of the following information may not apply  
to your particular product; however, as with  
any electronic product, precautions should be  
observed during handling and use.  
Additional Safety Information  
Theapparatusshallnotbeexposedtodrippingor  
splashing and that no objects filled with liquids,  
such as vases, shall be placed on the apparatus.  
Alwaysleavesufficientspacearoundtheproduct  
forventilation.Donotplaceproductinoronabed,  
rug, in a bookcase or cabinet that may prevent  
air flow through vent openings.  
Do not place lighted candles, cigarettes, cigars,  
etc. on the product.  
Connect power cord only to AC power source as  
marked on the product.  
Care should be taken so that objects do not fall  
into the product.  
Do not attempt to disassemble the cabinet. This  
product does not contain customer serviceable  
components.  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with a dry cloth.  
Do not block any ventilation openings.  
Install in accordance with the manufacturer’s  
instructions.  
Do not install near any heat sources such  
as radiators, heat registers, stoves, or other  
apparatus (Including amplifiers) that produce  
heat.  
Only use attachments / accessories specified by  
the manufacturer.  
Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade  
or the third prong is provided for your safety.  
If the provided plug does not fit into your wall  
outlet, consult an electrician for replacement of  
the obsolete outlet.  
If your product operates on batteries, adhere to  
the following precautions:  
A. Any battery may leak electrolyte if mixed with a  
different battery type, if inserted incorrectly, or if  
all batteries are not replaced at the same time.  
B. Any battery may leak electrolyte or explode if  
disposedofinreoranattemptismadetocharge  
a battery not intended to be recharged.  
C. Discard leaky batteries immediately. Leaking  
batteries can cause skin burns or other personal  
injury. When discarding batteries, be sure to  
disposeoftheminthepropermanner, according  
to your state/provincial and local regulations.  
D. Battery shall not be exposed to excessive heat  
such as sunshine, fire or the like.  
Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from  
the apparatus.  
Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
Use only with a cart, stand, tripod, bracket, or  
table specified by the manufacturer, or sold  
with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as the  
power cord or plug is damaged,  
liquid has been spilled or objects  
]
have fallen into the apparatus, the  
apparatus has been exposed to  
rain or moisture, does not operate  
normally, or has been dropped.  
Portable Cart  
Warning  
-4-  
English IB(A5).indd  
6
4/15/2010 20:19:10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features  
Full high-definition video playback at up to 1080p resolution for an amazing viewing experience.  
Upconversion of standard definition DVDs for enhanced picture quality at up to 1080p over an HDMI  
connection.  
Rich multi-channel surround sound.  
Easy and simple HDTV connection using a single HDMI cable (cable not included).  
Multiple outputs for connecting your home theater system or amplifier.  
PIP functionality that lets you display primary and secondary video at the same time (if available on the  
Blu-ray Disc).  
Pop-up menu display without interrupting playback (if available on the Blu-ray Disc).  
HDMI 1080p/60fps output (Blu-ray Disc only) that provides smooth playback of video with a frame rate  
of 60 frames per second (TV must be connected with an HDMI cable and be compatible with 1080p 60  
frame).  
Connections and Setup  
Accessories Provided  
Left and right front  
Remote control and 2  
AAA batteries  
Subwoofer  
Left and right Sur-  
round speakers  
Center speaker  
speakers  
One Pig-Tail  
antenna wire  
Composite  
video cable  
One external AM  
loop antenna  
-5-  
English IB(A5).indd  
7
4/15/2010 20:19:10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections and Setup  
AM Loop Antenna  
Things to Consider before You Connect  
1. Uncoil the AM antenna wire.  
2. Press down on the antennas tab to open the  
terminal.  
3. Make sure the white wire on the AM loop  
antenna is inserted into the AM loop terminal  
and the other wire is inserted into the ground  
loop terminal.  
Ensure that the mains supply in your house  
complieswiththatindicatedontheidentification  
sticker located on the back of your unit.  
Install your unit horizontally, away from  
any source of heat (fireplace) or appliances  
creating strong magnetic or electric fields. The  
components of this unit are sensitive to heat.  
Themaximumambienttemperatureshouldnot  
exceed 35°C / 95°F.  
Leave enough space around the unit to allow  
adequate ventilation: 10 cm/4 inches on either  
side and above the top, and 5 cm/2 inches at the  
rear.  
The humidity of the room should not exceed  
75%. If you have to use the unit outdoors, do not  
exposeittorainorsplashingwater.Theapparatus  
should not be exposed to dripping or splashing  
and no objects filled with liquids, such as vases,  
should be placed on the apparatus.  
Moving the unit from a cold place to a warm one  
can cause condensation on some components  
inside the unit. Let the condensation disappear  
on its own before turning the unit on again.  
Before moving the unit, make sure the disc tray  
is empty.  
Connecting to Your TV (VIDEO)  
Method 2  
Method 1  
TV  
VIDEO IN  
Y
Component  
Video Cable  
(not supplied)  
PB  
VIDEO IN  
P
R
Green  
Blue  
Red  
Video  
Cable  
Where the mains plug or an appliance coupler  
is used as a disconnect device, the disconnect  
device shall remain readily operable.  
Other important use and cleaning information  
at the end of the booklet.  
Method 1  
Composite video jack (yellow)  
The basic video jack is color-coded yellow.  
Video cable (yellow) is supplied for the  
connection for good picture quality.  
Connect the video OUT jack on the receiver  
to the Video IN jack on your TV so the video  
content goes from the receiver to the screen.  
Connecting the Antennas  
FM antenna  
Method 2  
Component video jacks (Pr, Pb, Y)  
AM Antenna  
The component video jacks are color-coded  
green, blue and red.  
White  
Additional component video cables (not  
supplied) are required to provide better picture  
quality.Theyareusuallycolor-codedgreen,blue  
and red.  
The AM and FM antennas connect to the AM and  
FM terminals on the system’s back panel. They  
must be hooked up in order to receive clear re-  
ception.  
ConnectthecomponentvideoOUTjacksonthe  
receivertothecomponentvideoINjacksonyour  
TV so the video content goes from the receiver  
to the screen.  
-6-  
English IB(A5).indd  
8
4/15/2010 20:19:10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections and Setup  
Connecting AUDIO OUT to an Audio  
System (via 2-Channel Analog Audio  
Output)  
Connect the AUDIO OUT jacks from the unit to the  
AUDIO IN jacks on TV, VCR, Stereo system or other  
audio component.  
If your television is a high definition  
television, use the unit’s HDMI output to  
get the highest possible video resolution.  
If one of the devices is not working, check  
that all the cables have been inserted  
properly into the jacks.  
If your component has only one input for  
audio (mono), connect it to the left (white  
L/Mono) audio jack on the TV and don’t  
connect the right audio part of the cable.  
TV  
Stereo system  
VCR  
AUDIO IN  
OR  
OR  
Connecting to Your TV (via HDMI input)  
Red  
HDMI stands for High Definition Multimedia In-  
terface. HDMI transfers digital audio and uncom-  
pressed digital video on a single cable.  
You can select the resolution of the player’s HDMI  
output to match your TV’s resolution capabilities,  
please see instructions on page 18 for Resolution  
setting.  
Audio cable  
(not included)  
White  
TV  
HD MI  
HDMI cable  
(not supplied)  
To HDMI  
input  
To HDMI  
output  
Note:  
Refer to the owner’s manual of the connected  
TV as well.  
-7-  
English IB(A5).indd  
9
4/15/2010 20:19:11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections and Setup  
Connecting AUDIO IN from External Connecting your player to a wired  
Sources such as TV  
Using AUDIO IN Jacks  
router  
Connect an Ethernet cable (CAT5 or better with  
RJ45 connector) to the ETHERNET jack on the back  
of your player and to an Ethernet jack on a hub or  
broadband router.  
Connect the AUDIO IN jacks from the unit to the  
AUDIO OUT jacks on VCR, TV, SAT/Cable Box or  
other component. Press either SOURCE button  
on the main unit or AUX button on the remote  
control to select AUX mode.  
LAN  
Hub or broadband router  
TV  
SAT/  
AUDIO OUT  
VCR  
Cable Box  
OR  
OR  
White  
Audio cable  
(not included)  
LAN cable  
(not included)  
Red  
Digital Optical Input  
Connect components capable of outputting  
Dolby digital (e.g. TV or SAT/Cable Box) or stan-  
dard PCM (CD) format digital signals. Use a fiber  
optical cable for this digital audio connection.  
(Cable not included).  
Press OPTICAL button on remote control or  
SOURCE button on main unit to select OPTICAL  
for digital audio output components.  
Notes:  
Do not connect a modular phone cable to  
the ETHERNET jack.  
When plugging or unplugging the cable,  
hold the connector on the end of the  
cable. When unplugging, do not pull on  
the cable. Press down the lock tab and pull  
the connector out of the jack.  
Because there are various connection  
configurations,followtheinstructionsfrom  
your telecommunication carrier or Internet  
service provider.  
-8-  
English IB(A5).indd 10  
4/15/2010 20:19:11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections and Setup  
Connecting the Speakers  
Speaker wires are color-coded to match the terminals. Connect the speaker wire from the back of each  
speaker to the corresponding color terminal at the back of the unit. Press down the tab to open the ter-  
minal and insert the wire. Release the tab to lock wire in the terminal.  
Front Speakers  
Center Speaker  
Right  
Left  
Green and Black  
Subwoofer  
Red and  
Black  
White and Black  
Purple and Black  
Insert  
Press  
Release  
Gray and Black  
Blue and Black  
Rear Speakers  
(Surround Sound)  
Right  
Left  
To adjust each speaker volume level for optimum listening experience.  
(1) Press the LEVEL button on the remote control to select FL (front Left speaker).  
(2) Press the  
or buttons to adjust the value up or down (between -10dB and +10dB).  
(3) Repeat step (1) and (2) for the other speakers FR, SL, SR, CT, SW.  
Speaker gains may be set to levels of up to +10dB, actual max levels may also depend on your Volume Setting.  
Note:  
When connecting the speakers, make sure the polarities (“+” speaker wire to “+” on the re-  
ceiver) of speaker wires and terminals match. For example, red wire to red terminal on the  
receiver. If the cords are reversed, the sound will be distorted. Do not let the speaker wires  
touch each other, it will damage the system’s amplifier.  
-9-  
English IB(A5).indd 11  
4/15/2010 20:19:11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections and Setup  
Positioning Speakers  
Front Speaker Placement  
3
For best results, follow the speaker placement  
below.  
1
Alignment  
Align the center speaker evenly with (A) or slight-  
ly behind (B) (the left and right speakers), but not  
ahead of them.  
2
1
4
3
Courtesy Dolby Laboratories  
1. Left, Right (Front Speakers)  
Front speakers carry primarily music and sound  
effects.  
2. Center  
In surround mode, the center speaker carries most  
of the dialog as well as music and effects.  
It should be set between the left and right  
speakers.  
Angle  
3. Surround (Rear Speakers)  
Place the left and right speakers to form a 45-de-  
gree angle with your favorite viewing position to  
duplicate the soundtrack mixer’s perspective.  
The surround speakers’ overall sound balance  
should be as close as possible to the front speakers.  
Proper placement is vital to establish an evenly  
distributed sound field.  
Height  
4. Subwoofer  
The three front speakers should be as close as  
possible to the same height. This often requires  
placing the center speaker directly on top (A) or  
beneath (B) the TV set.  
A subwoofer is designed to reproduce powerful  
low bass effects (explosions, the rumble of  
spaceships, etc.).  
Note:  
A
B
Center speaker provided with this unit  
is magnetically shielded to protect your  
TV set. It is not recommended to place  
speakers without magnetic shield near the  
TV set.  
-10-  
English IB(A5).indd 12  
4/15/2010 20:19:11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections and Setup  
No adjacent walls  
Better Surround Placement  
Surround speakers can go on stands facing  
each other to approximate sidewall mounting  
(A), or to the sides or rear of the viewing area,  
aimed upwards; they can go right on the floor, or  
preferably, a few feet off the floor such as on end  
tables (B).  
Location  
If possible, place surround speakers to either side  
of the listening area, not behind it.  
Height  
If space permits, install surround speakers 2-3 feet above  
viewers. This helps to minimize localization effects.  
Aiming  
Aim surround speakers straight across the room,  
not down at viewers, to help create a more open,  
spacious surround sound field.  
Test Tone/Channel Balance  
Channel Balance  
Your receiver is equipped with  
a
test signal  
generator to help balance the audio level for each  
channel. See Audio Setup under The Setup Menu  
section for more details on how to access this  
feature.  
Level Adjustment and Surround Channel Level  
Expectation  
Alternative Surround Placement  
Rear wall  
Even though you adjust the surround channel to  
be as loud as the others on the test signal, you  
may find that surround channels seems quieter  
for actual TV and Movie content. This is because  
producers use surround for subtle atmospherics  
and ambience, and only rarely for special effects.  
If rear wall mounting is the only choice, aim the  
speakers at each other (A), towards the front (B) or  
towards the sidewalls (C, D).  
Experiment with placement until sounds seem to  
surround you, rather than come from behind you.  
Overview of Controls - Front Panel Controls  
Stop  
playback.  
Adjust the  
volume.  
Press to open or close Switch the unit  
the disc tray.  
on and off.  
Start/pause  
playback.  
Select the input sources.  
Press repeatedly to select:  
BD/USB, OPTICAL, AUX,  
TUNER.  
Connect a USB flash  
drive to this port.  
-11-  
English IB(A5).indd 13  
4/15/2010 20:19:11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview of Controls  
OPEN/CLOSE Press to open or close the disc tray.  
ON/STANDBY Press to turn on your unit, or put your unit in standby  
mode. When your unit is in standby mode, power is  
stillenteringyourunit. Todisconnectpower, unplug  
the power cord.  
Numbers  
In playback mode, press GOTO button, then press  
the number buttons to enter a title, chapter, track,  
or time.  
CLEAR  
GOTO  
Press to clear an input.  
Press to search for a title, chapter, track or time.  
A(red),  
When playing a Blu-ray Disc that has a Java  
application, press to control playback. For more  
information, see the documentation that came with  
the Blu-ray Disc.  
B(green),  
C(yellow),  
D(blue)  
VOL+/-  
MUTE  
Press to increase or decrease the volume.  
Press to turn off sound. Press again to turn the  
sound back on.  
POP UP  
During Blu-ray Disc playback, press to open a menu  
that lets you control Blu-ray Disc playback.  
During DVD playback, press to open the DVD title  
menu (if available).  
SKIP  
/
Press to go to the next or previous chapter (Blu-ray  
Disc/DVD) or track (CD).  
In tuner mode, press to go to the next higher /lower  
preset station.  
REV  
Press to fast reverse.  
STOP  
Press to stop playback.  
PLAY/PAUSE Press to start or pause playback.  
FWD  
Press to fast forward.  
Navigate through the menus. The left and right arrows also  
tune the radio frequency in the tuner mode.  
,
/TUNE  
,
/TUNE  
,
OK  
Confirms your selection.  
EXIT  
SETUP  
Press to return to the previous menu.  
Press to access the speaker setting and test tone.  
ToenableordisabletheCenterspeaker/surroundspeakers,  
press this button, and press  
/
buttons to select Center  
Speaker or Surround Speaker, then use  
/
buttons on  
the remote control to choose YES or NO.  
To start or end the test tone, press this button, and  
press  
/
buttons to select TS TONE, then press OK  
button. The audio signal will be sent to a different  
speaker every approximately two seconds; you can  
also use  
/
buttons to select the speaker channel  
you wish to test and adjust, you’ll hear a test tone  
coming from the speaker you select, use  
/
buttons to adjust the level to your desired setting.  
Press OK button to exit this function.  
OPTICAL  
AUX  
Press to select OPTICAL input source.  
Press to select AUX input source.  
TUNER  
Press to select TUNER mode, and toggle between  
the FM and AM bands.  
-12-  
English IB(A5).indd 14  
4/15/2010 20:19:11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview of Controls  
BD/USB  
Press to select the BD/USB mode.  
LEVEL  
Toggle channels for different level settings. Adjusts  
the value using  
/
.
REPEAT  
Presstorepeatthecurrenttitle, chapter, track, orrepeatall.  
This button is only used for DVD/CD discs.  
MEM/ANGLE Stores a station in tuner mode.  
Accesses the camera angle function for Blu-ray or  
DVD discs if available.  
ZOOM  
EQ  
Press to zoom in on the video. Each time you press  
this button, the magnification level changes. This  
button is only used for DVD discs .  
Selects among preset equalizer mode (POP, ROCK,  
CLASSIC, JAZZ, BASS, TREBLE and FLAT). Press  
the corresponding button to select the desired  
sound mode. This function is only available in Stereo  
mode. Note: For BASS and TREBLE effects, you can  
use  
/
buttons on the remote control to adjust  
the value up or down by step 2 dB (between -10dB  
and +10dB).  
INFO  
PiP  
Accesses the Info menu.  
Press to turn PiP (picture in picture) mode on or  
off. This function is only available by Blu-ray discs  
if available on disc.  
AUDIO  
Accesses the audio function. PiP Audio can be  
selected through cursor if secondary Audio is  
available on the Blu-ray Disc.  
Selects between Stereo and Mono mode for Tuner  
(FM).  
SURROUND/ Press repeatedly to display current Surround Sound  
SUBWOOFER setting or display current Subwoofer setting (Soft/  
Balance/Strong/Powerful). To change settings, first  
press repeatedly to access the current Surround or  
Subwoofer setting, then use  
/
buttons on the  
remote control to change the current setting.  
DIMMER/  
NIGHT  
Press repeatedly to show the display window  
brightness level or the current NIGHT mode, then  
use  
/
buttons on the remote control to change  
the current setting.  
Note: NIGHT mode is only available for set and  
effective during Dolby Digital signal playback.  
MENU  
Accesses the disc menu during playback.  
SUBTITLE  
Accesses the subtitle function.  
PiPSubtitlecanbeselectedthroughcursorifsecondary  
subtitle is available on the Blu-ray Disc.  
Note:  
Insert the two “AAA” (included with this unit) bat-  
teries into the remote control prior to use.  
-13-  
English IB(A5).indd 15  
4/15/2010 20:19:11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback Operations  
Compatible Discs  
playback stops completely. Press  
start playback again at the beginning of the  
disc.  
To fast forward or fast reverse, press  
forward) or (fast reverse). Each time you  
press one of these buttons, the fast-forward or  
fast-reverse speed increases from Fast X2, Fast  
X4, Fast X8, Fast X16, Fast X32, Fast X64, to Fast  
button to  
• Blu-ray Disc  
• DVD-video (DVD-ROM)  
• DVD+RW, DVD-RW  
• DVD+/-R  
• Audio CDs (CDDA)  
• JPEG  
(fast  
Regional Coding  
X128. Press  
Press either the  
the desired direction.  
Press the button to skip to the start of the  
current chapter or skip to previous chapters.  
Press the button to skip to the beginning of  
the next chapter.  
to resume normal playback.  
or button according to  
This unit has been designed to play back BD-video  
with region “A” and DVD-video with region “1”.  
You cannot play back BD-video or DVD-video that  
are labeled for other regions. Look for the symbols  
on the right on your BD-video or DVD-video.  
If these region symbols do not appear on your  
BD-video or DVD-video, you cannot play back the  
disc in this unit. The letter or number inside the  
globe refers to region of the world. A BD-video or  
DVD-video labeled for a specific region can only be  
played back in the unit with the same region code.  
Playing files on a data disc or USB  
thumb drive  
When you insert a data disc or USB thumb drive  
containing picture or video files into your unit,  
icons are added to the menu to indicate that video  
or picture files are available for playback.  
Playing a Blu-ray Disc or DVD  
1. Turn on your television set.  
2. Press ON/STANDBY button on the remote  
control or STANDBY/ON button located on the  
unit’s front panel. Press BD/USB on the remote  
control.  
3. Press OPEN/CLOSE button to open the disc  
tray.  
Videos  
Settings  
Pictures  
4. Place a disc onto the disc tray with the label  
side up.  
5. Press OPEN/CLOSE button again to close the  
disc tray.  
6. After loading a disc, playback starts automatical-  
ly, or the disc menu appears. If the disc menu ap-  
pears, select the Play option to begin playback.  
To play video files:  
1. Press  
press OK button. A menu opens.  
2. Press button, and press or  
or  
button to select Videos, then  
buttons to  
select Play Files, then press OK button. A dia-  
logue window appears.  
Controlling Blu-ray Disc or DVD  
Playback  
Please select Play mode  
To start or pause playback, press  
button.  
Play All  
Cancel  
The sound is muted when your unit is in pause  
mode. To resume normal playback, press  
button.  
To stop playback, press  
tings menu is displayed. To resume playback,  
press or button to select DVD/BD-ROM,  
button. The Set-  
then press OK button. Depending on the disc,  
playback starts where it stopped or at the be-  
ginning of the disc. If you press button twice,  
-14-  
English IB(A5).indd 16  
4/15/2010 20:19:12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback Operations  
3. Press or button to select Play All (plays all  
Viewing photographs  
files), then press OK button to start playback.  
This unit can display digital photographs files that  
have been stored on to a data disc or USB flash  
drive.  
If you want to see information about the file  
that is playing, press INFO button on the re-  
mote control.  
1. Insert a disc or USB flash drive with photograph.  
The following menu opens:  
To create a playlist:  
1. Insert a disc or plug in a USB flash drive, select  
Videos, then press button.  
2. Press  
or  
button to select Optical Disc or  
Videos  
USB, then press OK button. A file browser win-  
dow opens with a list of files and folders.  
Settings  
Pictures  
3. Press  
then press OK button. If you selected a folder,  
the files in the folder are displayed. Press or  
or  
button to select a file or folder,  
button to select a file, then press OK button.  
The following menu opens:  
2. Press  
press OK button.  
3. Press button.  
or  
button to select Pictures, then  
Add to Playlist  
Play (File)  
4. Press  
or  
button to select an option, then  
press OK button. You can select:  
Main Menu - Returns to the main menu.  
Play Files - Press or button to select an  
option, then press OK button.  
4. Press  
or  
button to select Add to Playlist,  
then press OK button. The file is added to the  
playlist now.  
To create a playlist:  
1. Insert a disc or plug in a USB flash drive, select  
Pictures, then press button.  
2. Press  
or  
button to select Optical Disc or  
USB, then press OK button. A file browser win-  
dow opens with a list of files and folders.  
3. Press button.  
Notes:  
If the file you selected is already in the  
playlist, Remove from playlist appears.  
4. Press  
or  
button to select an option, then  
When you add  
a
file to the playlist,  
press OK button. You can select:  
Add all to playlist - Adds all files to the play-  
list.  
Previous folder - returns the previous menu.  
Play Files - Plays all files or plays files in the  
current folder.  
Remove all from playlist appears on the  
screenautomatically.YoucanuseRemove  
all from playlist, Previous Folder and  
Play Files to control playback.  
Press EXIT button in the file browser  
window can return to the upper folder.  
To add a JPEG file to the playlist:  
1. Insert a disc or plug in a USB flash drive, select  
Pictures, then press button.  
2. Press  
USB, then press OK button.  
or  
button to select Optical Disc or  
-15-  
English IB(A5).indd 17  
4/15/2010 20:19:12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback Operations  
3. Press  
,
,
or  
buttons to select a file or  
Displaying Blu-ray Disc information  
folder, then press OK button. If you selected a  
folder, the files in the folder are displayed. Press  
Press INFO button, your unit displays informa-  
tion about the Disc, such as type of disc, current  
elapsed time in title, total number of chapters.  
Press INFO button again to exit.  
,
,
or buttons to select a file, then press  
OK button. The following menu appears:  
Note: The information displayed for  
discs other than Blu-ray Discs will be  
different.  
Add to Playlist  
Searching for  
elapsed time  
a
title, chapter, or  
4. Press OK button again to add the selected file  
to the playlist.  
1. During playback, press GOTO button one or  
more times to select a search mode.  
One press selects Goto Title mode.  
Two presses selects Goto Chapter mode.  
Three presses selects Goto Time mode.  
Playing an audio CD  
1. Press ON/STANDBY button on the remote  
control or STANDBY/ON button located on the  
unit’s front panel.  
2. Press the number buttons to enter the title  
number, chapter number, or time, then press  
OK button. Your unit goes to the title, chapter,  
or time you entered.  
2. Press OPEN/CLOSE button to open the disc tray.  
3. Place a CD on the disc tray with the label facing  
up, then press OPEN/CLOSE button to close  
the disc tray. It may take a few seconds for the  
CD to load.  
4. After loading a disc, playback starts automati-  
cally.  
Repeating a title, chapter, or CD track  
(DVD/CD)  
Press REPEAT button one or more times to se-  
lect a repeat mode.  
5. To eject the CD, press OPEN/CLOSE button.  
Using PiP (picture-in-picture) mode  
Some Blu-ray Discs are compatible with picture-in-  
picture (PiP) mode. In PiP mode, the primary video  
is displayed on the full screen, and the secondary  
video is displayed in a small window.  
To control audio CD playback:  
To start or pause playback, press  
button.  
The sound is muted when your unit is in pause  
mode. To resume normal playback, press  
button.  
To stop playback completely, press button. To  
start playback again, press  
button. Playback  
Primary video  
starts at the beginning of the CD.  
To fast-forward, press button. To resume nor-  
Secondary video  
mal playback, press  
To fast-reverse, press button. To resume nor-  
button.  
Press PiP button to turn PiP mode on or off.  
Press AUDIO or SUBTITLE button to turn the  
audio/subtitle for the video in the PiP window  
on or off. Then use cursor buttons and OK  
button to select your preferred options.  
mal playback, press  
Press either the  
the desired direction.  
Press the button to skip to the start of the  
current track or skip to previous tracks. Press  
the button to skip to the beginning of the  
button.  
button according to  
or  
Notes:  
next track.  
The available options of Audio vary  
from different disc format.  
To select a track, press GOTO button once, en-  
ter the track number with the number buttons,  
then press OK button. Press GOTO button twice  
to select a desired time position by pressing the  
appropriate number buttons and OK button.  
PiP Subtitle is not available for all discs. It  
only applies to Blu-ray discs that supports  
picture-in-picture features.  
-16-  
English IB(A5).indd 18  
4/15/2010 20:19:12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback Operations  
The Setup Menu  
The Settings menu appears automatically when  
the unit is in BD/USB stop mode.  
Using a disc popup menu  
1. During Blu-ray or DVD playback, press POP UP  
button. The Blu-ray popup menu or the title  
menu of DVD disc opens.  
Language Setting  
1. In the main menu of Settings, press button,  
then use or button to select Language.  
2. Press  
,
,
or buttons to select an option,  
then press OK button.  
Selecting a play source  
Display  
Press SOURCE button on the front panel of the  
unit repeatedly to select BD/USB, OPTICAL,  
AUX, TUNER.  
Language  
Audio  
OSD  
English  
Auto  
Menu  
Audio  
Subtitle  
Press BD/USB button on the remote control to  
select BD/USB mode.  
Press OPTICAL button on the remote control to  
select OPTICAL mode.  
Press AUX button on the remote control to  
select AUX mode.  
Press TUNER button on the remote control to  
select TUNER mode.  
Auto  
Settings  
Language  
System  
None  
Network  
2. Press button and press  
select an option, then press OK button.  
button to select the language  
you wish, then press OK button to confirm your  
or  
button to  
Selecting the audio mode  
3. Press  
or  
1. Press AUDIO button. Your unit displays audio  
channel information, such as 01/03 Eng Dolby  
Digital. 01 indicates the currently selected  
audio channel. 03 indicates the total number  
of audio channels. Eng (English) indicates the  
audio language. Dolby Digital describes the  
currently selected audio format.  
selection.  
4. Press or EXIT button to go to the previous  
menu.  
2. Press button and press  
select an audio mode, then press OK button.  
or  
button to  
Notes  
• If the selected language is not available on a  
disc, the disc’s language will be used instead.  
• If the language chosen is available, it is  
automatically selected when you display  
the subtitles or press SUBTITLE button on  
the remote control. Otherwise, the subtitle  
language indicated on the disc is selected.  
Selecting the camera angle (Blu-ray  
Disc and DVD disc)  
Some discs offer different camera angles for  
specific scenes. To change the camera angle:  
1. Press MEM/ANGLE button on the remote  
control. The selected angle will be displayed on  
the display bar at the top of the TV screen.  
2. Press button and press  
or  
button to  
select the desired angle, then press OK button.  
If the disc was recorded using a single camera  
angle, this function is not available.  
IMPORTANT!  
Many BD-Live compatible discs require content  
to be downloaded onto USB flash drive in order  
to access the available BD-Live features.  
A USB flash drive with free space > 1GB needs  
to be inserted prior to inserting the BD-Live  
compatible disc.  
-17-  
English IB(A5).indd 19  
4/15/2010 20:19:12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Setup Menu  
480p:  
480i:  
If your TV is an enhanced-defini-  
tion TV (EDTV).  
If your TV is a standard-definition  
NTSC TV (American or Asian SD  
TV).  
Display Setting  
1. In the main menu of Settings, press button,  
then use or button to select Display.  
System  
Display  
Network  
HDMI Status  
HDMI Preferred Format  
TV Type  
Connected  
1080i  
Notes:  
NTSC  
Settings  
Display  
Audio  
• Selecting a resolution the TV does not  
support could result in an unstable  
picture or loss of the picture. See  
the documentation that came with  
the TV to find the resolutions the TV  
supports.  
Resolution  
1080p  
TV Aspect  
16:9 Wide  
Off  
Film Mode  
Language  
• Only the HDMI output on your unit  
supports 1080p video output at any  
frame rate. If the TV is connected to the  
component output, the video output is  
limited to 1080i or lower.  
2. Press button and press  
or  
button to  
select an option, then press OK button.  
3. Press  
or  
button to select the desired  
option, and then press OK button to confirm  
your selection.  
4. Press or EXIT button to go to the previous  
menu.  
TV Aspect  
HDMI Status  
16:9 wide, 16:9 Pillarbox, 4:3 Pan and Scan, and 4:3  
Letter Box are available for your choice.  
This option displays the HDMI status. If an HDMI  
TV is connected, Connected appears. If an HDMI  
TV is not connected, Disconnected appears.  
Film Mode  
Movies are recorded on film at a rate of 24 pictures  
(frames) per second. Many of the movies on Blu-ray  
discs are recorded on the discs at this frame rate.  
However, not all TVs can display 24 progressive  
frames/second of video. If the TV cannot display  
this frame rate, you need to turn off Film Mode.  
HDMI Preferred Format  
This option shows the best HDMI format for the  
connected TV.  
Resolution  
You can define the video output resolution in this  
option.  
HDMI Auto: If your TV is  
a
high-definition  
TV(HDTV) connected to the HDMI  
jack on your player and you want  
your player to set the output  
resolution based on information  
exchanged between the TV and  
your player over the HDMI cable.  
If the TV is a high-definition TV  
(HDTV) capable of 1080p (any  
frame rate) connected to the  
HDMI jack on your player.  
If your TV is a high-definition TV  
(HDTV) capable of 1080i only.  
If your TV is a high-definition TV  
(HDTV) capable of 720p only.  
Note:  
Only your unit’s HDMI output  
supports 1080p video output at any  
frame rate. The component outputs  
are limited to 1080i, regardless of  
the Film Mode setting.  
1080p:  
1080i:  
720p:  
-18-  
English IB(A5).indd 20  
4/15/2010 20:19:12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Setup Menu  
Digital Output  
Audio Setting  
PCM 5.1 — Sends a PCM audio signal of up to  
5.1 channels over the HDMI connection and up  
to 2 channels over the optical connection.  
PCM Stereo — Sets the output to PCM Stereo  
if you have not an audio receiver connected to  
your Blu-ray Dsic player or the audio receiver  
connected to Blu-ray Disc player is not a 5.1  
channel receiver.  
1. In the main menu of Settings, press button,  
then use or button to select Audio.  
Network  
Audio  
Display  
PCM Downsamoling  
Digital Output  
48K hz  
PCM 5.1  
Settings  
Audio  
Bitstream HD — Sends the original bitstream  
from the disc over the HDMI and SPDIF  
connections using highest quality possible.  
HDMI has the higher quality capabilities with  
advanced audio CODECs like TrueHD and DTS-  
HD. Blu-ray audio is limited to the soundtrack  
for the main moive (No PiP audio and no effects  
audio).  
Language  
System  
2. Press button and press  
or  
button to  
select an option, then press OK button.  
3. Press  
or  
button to select the desired  
Bitstream Legacy  
Sends the original  
option, and then press OK button to confirm  
your selection.  
4. Press or EXIT button to go to the previous  
menu.  
bitstream from the disc over the HDMI and  
SPDIF connections using legacy audio formats.  
Blu-ray audio is limited to the soundtrack for  
the main movie (No PiP audio andno effects  
audio).  
PCM Downsampling  
Bitstream Mixed — Sends mixed and encoded  
Blu-ray audio streams in a single bitstream. This  
mode is primarily intended for use with SPDIF  
5.1CH receivers to produce mixed Blu-ray audio  
in surround sound.  
If your player is connected to an audio receiver or  
TV with an optical cable, you will need to select  
the highest PCM sampling rate the amplifier  
supports.  
If you DO NOT have a surround sound receiver  
connected to your player through one of the  
digital audio jacks (optical), select 48kHz.  
Otherwise, select the highest sampling rate the  
receiver supports. See the documentation that  
came with the receiver.  
There are 3 options (48kHz, 96kHz and Off) are  
available.  
Note:  
Setting the optical audio output’s  
PCM downsampling sampling rate  
too high may result in unpredictable  
audio playback. If you are not sure,  
set the rate to 48kHz.  
-19-  
English IB(A5).indd 21  
4/15/2010 20:19:13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Setup Menu  
Restore factory defaults  
If you choose OK in the prompt message box, all  
settings will be restored to the factory defaults.  
System Setting  
1. In the main menu of Settings, press button,  
then use or button to select System.  
Network Setting  
System  
Audio  
1. In the main menu of Settings, press button,  
then use or button to select Network.  
2. Press button.  
Optical Disc AutoPlay  
BD-Live Internet Access  
BD-Live Storage  
On  
Always Allow Access  
internal USB (0.0 KB Free)  
Language  
System  
Erase Blu-ray Storage  
Update Via Network  
Restore factory defaults  
Settings  
Required Storage: 48 MB  
Language  
Restore factory settings and deactivate  
Network  
System  
Wired  
Display  
Settings  
Network  
Display  
Network Test  
2. Press button and press  
or  
button to  
select an option, then press OK button.  
Audio  
3. Press  
or  
buttons to select the desired  
option, and then press OK button to confirm  
your selection.  
4. Press or EXIT button to go to the previous  
menu.  
3. Press or button to select Wired, then press  
OK button. The IP Settings screen appears. If the  
network connection is active, Link Up appears  
next to Link Status. If the network connection  
is not active, Link Down displays next to Link  
Status.  
Optical Disc AutoPlay  
If On is selected, it will load data and play back  
automatically when you insert  
a
Blu-ray disc.  
When Off is selected and if you insert a Blu-ray  
disc, the disc you can select will be displayed on  
the Settings menu.  
IP Settings  
Link Status  
MAC Address  
IP Mode  
Link Down  
xx:xx:xx:xx:xx:xx  
Dynamic  
0.0.0.0  
BD-Live Internet Access  
Limit Access — Allows Internet access with  
valid “BDLivenetwork access approval.  
Always Allow Access — Always allows BD-Live  
Internet access.  
IP Address  
Subnet Mask  
Gateway  
0.0.0.0  
0.0.0.0  
Primary DNS  
Secondary DNS  
0.0.0.0  
Prohibit Access  
Never allows BD-Live  
0.0.0.0  
Internet access.  
Apply  
Cancel  
BD-Live Storage  
The available storage space is displayed next to  
BD-Live Storage.  
4. Press  
or  
button to select IP Mode, then  
press OK button.  
Erase Blu-ray Storage  
5. Press  
or  
button to select an IP Mode. You  
If you choose OK to erase Blu-ray storage, all  
bookmarks and BD-Live content saved in memory  
are deleted.  
can select:  
Dynamic — Uses DHCP to automatically obtain  
an IP address.  
Manual  
Lets you manually configure  
Update Via Network  
network settings, such as IP address, subnet  
mask, and gateway settings.  
Off — Disables the network interface.  
This option displays the required storage space  
if the BD player is connected to internet for  
upgrade.  
-20-  
English IB(A5).indd 22  
4/15/2010 20:19:13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Setup Menu  
AUX/OPTICAL  
TV, VCR, SAT/Cable Box or portable audio players  
can be connected to AUDIO IN jacks at the back  
of the unit so that sound from the auxiliary  
component comes into the unit and out through  
the speakers.  
6. Press or EXIT button to go to the previous  
menu.  
Network Test  
You can test the connectivity of the network  
configuration by “pinging” an IP address. Pinging  
means sending a signal to an IP address and  
waiting for a retuning signal.  
Connecting Auxiliary Components  
Refer to Connecting AUDIO IN from external  
sources such as TV for details on connecting the  
auxiliary components to the unit.  
Selecting AUX/OPTICAL Mode  
Press either SOURCE button on the main unit or  
AUX/OPTICAL button on the remote control to  
select AUX/OPTICAL mode.  
Sound Output in AUX or OPTICAL  
Mode  
You may change the Surround Sound setting  
to STEREO mode if you like (see instructions  
under Overview of Controls). However,  
we recommend you leave the system in full  
surround mode.  
If the auxiliary audio signal is mono, there  
will be no output from some speakers in full  
surround mode.  
-21-  
English IB(A5).indd 23  
4/15/2010 20:19:13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Radio  
The unit has a built-in tuner that allows for FM  
radio function. The AM loop antenna allows for  
AM radio function.  
Manual preset  
1. Tune to a radio station (see Manual tuning for  
details).  
2. Press MEM/ANGLE button. While the Program  
Preset number is still flashing, input your desired  
preset number using the numeric buttons, then  
press MEM/ANGLE button to store it.  
Manual tuning  
1. Connect the FM antenna and the AM loop  
antenna at the back of the unit.  
2. Press TUNER button.  
3. Tune a station by pressing TUNE  
/
buttons  
Retrieving preset stations  
repeatedly until the desired station is found.  
Alternatively, you can press and hold the  
same buttons down for about two seconds  
to activate the automatic search function. In  
this mode the unit will automatically tune  
frequencies until it finds a station.  
1. Press TUNER button to enter the Tuner mode.  
2. Press  
/
buttons to search up or down for  
the preset stations or directly press the numeric  
buttons.  
4. Repeat step 3 to tune to another radio station.  
5. Press TUNER button to toggle between FM and  
AM.  
Tips:  
When the FM station broadcasts Stereo  
sound is found, ST is displayed.  
When you manually tune into a weak FM  
station, press AUDIO button on remote  
control to switch from Stereo to Mono  
mode. This will reduce the background  
noise.  
Storing radio stations  
The unit can store up to 30AM/30FM radio stations  
in its memory. You can enter every single radio  
station yourself or the unit can store all available  
radio stations automatically in ascending order.  
If there is any interference, change the  
antenna’s position until ideal sound  
reception is obtained. TV and other  
electronic devices could be the cause  
of interference, so try to position the  
antenna away from them.  
Automatic preset programming  
1. Press TUNER button to enter the Tuner mode.  
2. Press and hold TUNER button for two seconds  
to start automatic preset programming.  
3. Radio frequencies will be scanned and stored  
automatically. When all the available radio  
stations are stored or all 30AM/30FM memory  
locations are full, the auto preset programming  
function will stop.  
A weak signal can affect the Automatic  
preset  
programming  
function’s  
efficiency. Adjust the antenna for better  
reception and a more efficient search.  
-22-  
English IB(A5).indd 24  
4/15/2010 20:19:13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
The unit does not switch on.  
After connecting to the Internet, cannot down-  
load a file  
Make sure it is plugged in.  
Erase BD Storage.  
Make sure that the internet connection is work-  
ing.  
Press STANDBY/ON button on the remote con-  
trol or ON/STANDBY button on the front of the  
unit.  
Try a different USB flash drive.  
The device switches off spontaneously.  
File was downloaded, but playback from file  
pauses  
The devices switches off automatically when it  
is in STOP mode for more than 30 minutes with-  
out any user intervention. Switch it on again.  
It might be impossible to read the disc.  
Insert the disc with the printed side facing up.  
Check that the disc can actually be played by  
this device.  
Make sure that the USB flash drive is a USB 2.0  
device. Using a USB1.1 device may cause paus-  
ing.  
Try a different USB flash drive.  
There is no picture.  
Clean the disc.  
Check that the TV is operating correctly.  
Check the connections.  
Select the AV input assigned to the unit on the  
TV.  
Blu-ray Disc or DVD does not play  
Make sure that the disc has the correct region  
code.  
Replace the HDMI cable with a better one. A  
bad HDMI cable can cause loss of video.  
Some Blu-ray discs will only play over an HDMI  
connection.  
The picture is of poor quality (with snow or  
lines).  
Picture-in-Picture(PiP) does not work on a Blu-  
ray Disc  
Check the connections.  
Make sure that the disc supports PiP mode.  
There is no sound or the sound is of poor quality.  
When playing  
black  
a
BD-Live disc, the screen is  
Check the connections.  
Make sure the speakers are connected.  
Make sure the MUTE function is not on.  
Erase BD Storage.  
Make sure that the internet connection is work-  
ing.  
No surround sound.  
Check to see if system is actually in full Sur-  
round mode. To do this, press the SURROUND  
button on the remote control - the front panel  
display should indicate the current setting. If  
current setting is STEREO, the surround speak-  
ers and center speaker will be inactive. Press  
Make sure that the internet cable is connected  
securely and correctly to the unit and the inter-  
net jack. Some discs require an Internet con-  
nection to play.  
Cannot connect to the internet  
Make sure that the Internet connection is set up  
correctly.  
Test the Internet connection to make sure that  
it is working.  
Make sure that the BD-Live Internet Access op-  
tion is not set to Prohibit Access.  
Make sure that the disc your are playing is a le-  
gal copy.  
/
button to change surround mode accord-  
ingly instead of STEREO.  
Note: Different file/disc can have different au-  
dio type. Press SURROUND button on remote  
control follow by  
or  
buttons can select  
the among available surround modes with  
showing on front display.  
-23-  
English IB(A5).indd 25  
4/15/2010 20:19:13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Troubleshooting  
I can’t find my file in the JPEG listing.  
Precautions  
Use  
Make sure the file name is valid.  
If your unit has been stored in a cool place for  
any length of time, during a journey for example,  
wait for about 2 hours before using it.  
The remote control does not work or works  
only intermittently.  
The openings located on the top and bottom  
are for ventilation and must not be obstructed.  
During thunderstorms, we recommend that  
you isolate the unit from the electrical supply  
so that it is not damaged by electrical or  
electromagnetic surges.  
This unit is designed for continuous use.  
Switching off the unit to standby mode does  
not disconnect it from the mains supply. To  
completely isolate the equipment, remove the  
plug from the mains jack as some components  
remain connected to the electrical supply.  
If you notice any burning or smoke, disconnect  
the unit immediately to avoid any risk of  
electrocution.  
Do not attempt to look inside the unit through the  
disk tray opening or any other opening. You may  
be electrocuted or exposed to laser radiation.  
This unit is for domestic use only and must not  
be used for industrial purposes.  
Total or partial copying of recordings protected  
by copyright legislation, without the explicit  
permission of the holder of the rights,  
contravenes current legislation. Copying  
or downloading music files for sale or any  
other business purpose constitutes or could  
constitute a violation of copyright law.  
Check that batteries are inserted or change  
them.  
Aim the remote control at the unit. The infrared  
beam must not be blocked or interrupted.  
Check that the remote control is configured  
to control the device you are trying to operate  
with it.  
The subtitles do not appear.  
Check that the BD/DVD disc provides subtitles.  
Refer to the section on how to display sub-  
titles.  
The disc menu language is not the correct one.  
The disc menu language has not been set up.  
The language of your choice is not available on  
the disc.  
Cleaning  
Use a soft, dry, clean cloth. Regularly dust the  
vents at the back or sides.  
Using solvents, abrasive or alcohol-based prod-  
ucts risks damaging the unit.  
If an object or liquid enters inside the unit, un-  
plug it immediately and have it checked by an  
authorized servicer or service center.  
-24-  
English IB(A5).indd 26  
4/15/2010 20:19:13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Handling and Caring for Discs  
Blu-ray Disc (BD)  
Handle your discs with care. Hold the disc with  
your fingers at the edges or through the hole.  
Insert the disc with the label facing up (for a  
single-sided disc).  
Place the disc properly into the tray in the allot-  
ted holder.  
Use a soft cloth to clean discs if necessary, al-  
ways wiping from the centre to the edge.  
Always put discs back in their cases after use  
and store in a vertical position.  
Do not close the tray with two discs in it or with  
a disc not sitting correctly in the holder.  
Do not play cracked, chipped or warped discs  
nor try to repair them with adhesive tape or  
glue.  
A disc format developed for recording/playing  
high-definition (HD) video (for HDTV, etc.), and for  
storing large amounts of data. A single layer Blu-  
ray Disc holds up to 25 GB, and a dual-layer Blu-ray  
Disc holds up to 50 GB of data.  
DVD-Video  
Digital video discs - 12 cm, single or double sided,  
single or dual layer. DVDs are high density optical  
discs on which high quality picture and audio are  
recorded by means of digital signals.  
DVD-R, DVD-RW, DVD+R, DVD+RW  
Most DVD-R and DVD+R (one recording  
only), DVD-RW and DVD+RW discs  
(rewritable), depending on the DVD  
writer and discs used. Recordings using  
Do not write on a disc.  
Do not move the unit when a disc is being  
played.  
DVD+Rewritable  
Do not scratch discs or store them in places ex-  
posed to direct sunlight, high humidity or high  
temperatures.  
Do not use aerosol cleaners, benzene, anti-stat-  
ic liquids or any other solvent for cleaning discs.  
When cleaning, wipe gently with a soft damp  
(water only) cloth from the centre to the edge,  
avoiding circular motions, which could cause  
scratches and interference during playback.  
DVD-R and DVD-RW discs must be made  
in Video DVD mode. Recordings using  
DVD+RW discs must be made in accordance with  
the specifications for DVD+RW discs with a 4.7 GB  
capacity.  
Audio CDs  
Audio CDs (12 cm).  
CD-R, CD-RW  
Compatible Formats  
Most CD-R (one recording only) and CD-RW discs  
(rewritable).  
In order to ensure playback, discs must conform  
with BD, DVD or CD standards. This unit may not  
play some recordings or files due to differences in  
recording formats, software used and disc types.  
CD-Rs written during a multisession recording can  
be played, provided that the session has ended  
before the disc is played (depending on the write  
software).  
BD-ROM  
BD-ROMs (Blu-ray Disc Read-Only Memory) are  
commercially produced discs and are available  
in the same capacities as BD below. Other than  
conventional movie and video contents, these discs  
have enhanced features such as interactive content,  
menu operations using pop-up menus (see below),  
selection of subtitle display, and slideshow. Although  
a BD-ROM may contain any form of data, most BD  
ROM discs will contain movies in High Definition  
format, for playback on Blu-ray Disc players.  
However, depending on the condition of the  
CD-writer, computer and the disc used, you may  
find that not all discs will play. When playing a  
CD-R disc, it is normal for the unit to take up to  
60 seconds to recognize the disc before starting  
to play.  
-25-  
English IB(A5).indd 27  
4/15/2010 20:19:13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
If the disc is not recognized after a period of 120  
seconds, remove the disc, and insert it again.  
“Blu-ray Discand  
are trademarks.  
Do not use its full capacity.  
“BD-Liveand “BD-Livelogo  
are trademarks of Blu-ray Disc  
Association.  
CD-Rs should be preferably used instead of  
CD-RWs (rewritable CDs) as, in certain cases,  
CD-RW playback may be faulty.  
Use reliable, good-quality CD write software.  
Close all other applications on the computer to  
ensure reliable CD-R disc recording.  
Manufactured under license  
from Dolby Laboratories.  
Dolby and the double-D  
symbol are trademarks of  
JPEG Files  
Dolby Laboratories.  
CD-R and CD-RW with JPEG files. Certain JPEG  
files, including progressive JPEG files, cannot be  
read by this unit.  
Manufactured under license  
from Dolby Laboratories.  
Dolby, Pro Logic, and the  
double-D symbol are trade-  
marks of Dolby Laboratories.  
The total number of files and folders on the disc  
should be less than 650. Make sure that files have  
the .jpg” extension. Files without the .jpg” exten-  
sion will not be able to be read by the unit --- even  
thought the files are shown as JPEG images on  
your computer.  
Manufactured under  
license under U.S. Patent  
#’s: 5,451,942; 5,956,674;  
5,974,380; 5,978,762; 6,487,535 & other U.S. and  
worldwide patents issued & pending. DTS and the  
Symbol are registered trademarks & the DTS logos  
are trademarks of DTS, Inc. © DTS, Inc. All Rights  
Reserved.  
HDMI, the HDMI logo and  
High-Definition Multimedia  
Interface are trademarks or  
registered trademarks of HDMI Licensing LLC.  
Java and logo are trademarks or  
registered trademarks of Sun  
Microsystems, Inc. in the United  
States and/or other countries.  
-26-  
English IB(A5).indd 28  
4/15/2010 20:19:13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Specifications:  
Amplifier Section:  
RMS Output Power: Dolby Digital Mode with 10% Total Harmonic Distortion  
Front, Rear and Center Channel: 167 Watts per channel (1kHz, 8Ω)  
Subwoofer Channel: 167 Watts (100Hz, 8Ω)  
Total RMS Output Power, Dolby Digital mode: 1000 W  
Muting Attenuation: 65 dB  
Frequency Response: 200Hz /3dB, 1KHz ref.  
Subwoofer Frequency Response: 10Hz/-3dB, 80Hz ref.  
Signal to Noise Ratio: 65 dB (Dolby Digital mode)  
AM Tuner Section:  
Frequency Response: 2kHz +/-6dB, 1kHz ref.  
Usable Sensitivity: 800uV/m @ S/N 20dB  
Signal to Noise: 38dB  
IF Rejection: 35dB  
FM Tuner Section:  
Frequency Response: 15kHz +/-3dB, 1kHz ref.  
Quieting: 24dBu  
Signal to Noise: 60dB(stereo) / 65dB(mono)  
IF Rejection: 50dB  
Dimensions (H x W x D mm):  
Unit: 67 x 430 x 335  
Front and Surround Speakers: 180 x 105 x 101  
Center Speaker: 105 x 180 x 101  
Subwoofer: 370 x 180 x 330  
-27-  
English IB(A5).indd 29  
4/15/2010 20:19:13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
AVC MULTIMEDIA (“AVC”) makes the following limited warranty. This limited warranty extend to the  
original consumer purchaser and is limited to non-commercial use of the product.  
One Year Parts & Labor Warranty  
AVC products purchased in the United States or Canada are warranted to be free from defects in  
materials or workmanship for a period of one year from the date of their original retail purchase. If the  
unit fails to conform to this warranty, we will service the product using new or refurbished parts and  
products, at AVC’s sole discretion.  
During a period of one year from the effective warranty date, AVC will provide, when needed, service labor  
to repair a manufacturing defect at its designated Service Center. To obtain warranty service in the United  
States or Canada, you must first call our Customer Support Center at 1-877-252-6873, during the hours  
listed in the box below. The determination of service will be made by AVC Customer Support. PLEASE  
DO NOT RETURN YOUR UNIT TO AVC WITHOUT PRIOR AUTHORIZATION. New or remanufactured  
replacements for defective parts or products will be used for repairs by AVC at its designated Service  
Center for one year from the effective warranty date. Such replacement parts or products are warranted  
for an additional one year from the date of repair or replacement. The Customer will be required to ship  
the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary  
repairs. The customer is responsible for all transportation charges to the service facility.  
Packaging and Shipping Instruction  
When you send the product to the AVC service facility you must use the original carton box and packing  
material or an equivalent as designated by AVC.  
Your Responsibility  
(1) You must retain the original sale receipt to provide proof of purchase.  
(2) These warranties are effective only if the product is purchased and operated in the United States or  
Canada.  
(3) Warranties extend only to defects in material or workmanship, and do not extend to any product  
or parts which have been lost or discarded, or damage to product or parts caused by misuse,  
accident, improper operation or maintenance, or use in violation of instructions provided with the  
product, or to product which has been altered or modified without authorization of AVC, or to  
products or parts thereof which have had the serial number removed or changed.  
-28-  
English IB(A5).indd 30  
4/15/2010 20:19:13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Warranty  
Out of Warranty  
In the event your product requires repair after the limited warranty period has  
expired, please contact our Customer Support Center at  
1-877-252-6873 or  
Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm, Saturday: 9am–NOON Eastern  
time.  
Important:  
You are responsible for any transportation, shipping or insurance relative to the return of product  
to our Product Returns Center.  
All warranties implied by state law, including the implied warranties of merchantability and fitness for  
a particular purpose, are expressly limited to the duration of the limited warranties set forth above.  
With the exception of any warranties implied by state law as hereby limited, the foregoing warranty  
is exclusive and in lieu of all other warranties, guarantees, agreements and similar obligations of  
manufacturer or seller with respect to the repair or replacement of any parts. In no event shall AVC be  
liable for consequential or incidental damages.  
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of  
these warranties in any manner whatsoever. The time within action must be commenced to enforce any  
obligation of AVC arising under the warranty or under any statute, or law of the United States or Canada  
or any state thereof, is hereby limited to one year from the date of purchase. This limitation does not  
apply to implied warranties arising under state law.  
This warranty gives you specific legal rights and you may also have other rights, which may vary, from  
state to state. Some states do not allow limitation on how long an implied warranty lasts, when an  
action may be brought, or the exclusion or limitation of incidental or consequential damages, so the  
above provisions may not apply to you.  
For more information on other products and services, please visit our web site at  
Important: Also keep your “Bill of Saleas proof of purchase.  
Model no. ................................................................................  
Product name ....................................................................  
Type of set. ........................................................................................................................................................................................  
Serial no. .................................................................................  
Date purchased ....................................................................  
Invoice no. ............................................................................  
Dealer name .......................................................................  
FOR SERVICE AND REPAIR, PLEASE VISIT  
Specifications and external appearance are subject to change without notice.  
© 2009 AVC MULTIMEDIA  
-29-  
English IB(A5).indd 31  
4/15/2010 20:19:13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printed in China  
811-110091W010  
English IB(A5).indd 32  
4/15/2010 20:19:13  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Q Logic Router ISR6152 User Guide
Q See Digital Camera QD113P User Guide
Radio Shack Cordless Telephone ET 547 User Guide
Ricoh All in One Printer MP C2500 Series User Guide
Roku MP3 Player Network Music Player User Guide
Samson DJ Equipment MDR 1064 User Guide
Samsung Cell Phone E340 User Guide
Samsung Digital Photo Frame SPF 75H User Guide
Samsung Home Theater System RTS E10 User Guide
Scotsman Ice Ice Maker CS0415 User Guide