RCA Flat Panel Television RLCDV3282A User Guide

32” LCD Television TV with DVD

MODEL: RLCDV3282A

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Caution

Safety Information

Unit and Accessories

Introduction

1. Front View

2. Rear View

5-10

3. Instruction for Wall Mount

4. Remote Control

8-10

Basic Operation

OSD Menu

12-19

12-13

1. Picture menu

2. Sound menu

3. Channel menu

4. Parental Control menu

5. Setup menu

16-17

6. Others menu

DVD Operation

20-27

Simple Troubleshooting

LIMITED PRODUCT WARRANTY

Download from Www.Somanuals.com. All Manuals Search And Download.

Caution

is intended to alert the user to the presence of un-insulated "dangerous

to constitute a risk of electric shock to the persons.

The exclamation point within an equilateral triangle is intend to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

Correct disposal of this Product

(Waste Electrical & Electronic Equipment (WEEE)

Your product is designed and manufactured with high quality materials and

components which can be recycled and reused.

This symbol means that electrical and electronic equipment, at their end-

of-life should be disposed of separately from your household waste.

Please dispose of this equipment at your local community waste collection/

recycling centre.

In the USA there are separate collection systems for used electrical and

electronic products. Please help us to conserve the environment we live

in!

This unit complies with America Safety directives.

This unit complies with FCC directives.

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety Information

Electrical safety

power

Physical safety

Download from Www.Somanuals.com. All Manuals Search And Download.

Unit and Accessories

TV set

Remote control

Batteries: 2xAAA

Instructions for fixing stand

Instructions for

fixing stand

User's manual

AC Cord

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Please insert a 12cm disc

according to the silk

Introduction

1. Front View

Power Indicator

Remote Control window

(Keep clear)

1). (IR) Infrared Receiver: Receives IR signals from the remote control.

(Power on/Standby)LED Indicator: Press POWER to turn on and off.

Indicator on(Red)

Indicator on(Green)

Standby mode

Power on mode

The effective receiving range for the signal is 5-8 metres from the front of the remote

control window, and 30⁰to the left or right side and 20⁰above or below the remote control

window.

2). The functions of the buttons:

INPUT: Press to display the input source menu.

MENU: Press to display the OSD menu,

press again to exit the menu.

CH+/-: Press to scan through channels.

VOL+/-: Press to adjust the volume.

PLAY: Play/pause the disc playing.

DVD

EJECT: Eject the disc.

POWER: Turn on/standby the TV set.

Press INPUTbutton on the TV set or remote control to

display the input source menu, and use CH+/- button on

the TV set or

button on remote control to select the

input source, press OK button on the remote control to

enter.

Note: Before you select the input source, make sure the

connections are prepared.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

2. Rear View

USB

Video R in L in

Coax

VGA

PC-IN HDMI1

HDMI2

HDMI3

(Service)

AUDIO OUT

AC POWER IN: Connect it to AC100-240V~ 50/60Hz power supply with the mains cable.

COAX : Digital audio output.

: Connect antenna or cable 75 Ohm coaxial to receive TV signal.

: Connect it to the HDMI output of video device.

HDMI1/2/3

USB(Service) : For service use only.

YPbPr : Connect them to the video output terminal of DVD.

L/R : Connect them to the audio output terminal of DVD

VIDEO : Connect it to video output of video device.

L/R in

: Connect them to audio output of video device.

AUDIO L/R out

Headphone out

: Connect them to audio equipments.

: Connect it to your headphone or audio equipments.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

3. Instruction for Wall Mount

The wall mount kit (not included) with your purchase allows you to mount your

RCA TV on the wall. For detailed information on installing the wall mount, refer

to the instructions provided by the wall mount manufacturer. It is strongly

recommended to contact a technician for professional assistance for wall mount

installation. RCA is not responsible for any damage to the product or injury to

yourself or others resulting from the wall-mounting.

Dimensions for Mounting Hole Pattern

400mm

200mm

This RCA TV is compatible with a 400mm x 200mm mounting hole pattern.

- 4 pcs of type M6 screws are required for installing the wall mount bracket to

your RCA TV. Do not use screws that are longer than 10 mm. Screws that

are too long may cause damage to the inside of the TV set.

- Do not fasten the screws too tight for this may damage the TV or cause the

TV to fall, resulting in personal injury. RCA is not liable for these kinds of

incidents

- Do not mount your RCA TV at more than a 15 degree tilt.

- Always use two people to mount the TV to a wall.

- Do not install your Wall Mount Kit while your TV is turned on. It may result in

personal injury due to electric shock.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

4. Remote Control

The remote control is using Infra-Red(IR). Point it towards the front of the LCD TV. The remote

control may not work correctly if it is operated out of range or out of angle.

INPUT

POWER

Press to display the input source

Press to turn the TV on/standby

PICTURE

Press repeatedly to cycle

through the available video

picture modes.

NUMBER BUTTONS

To select the program directly.

e.g.:

Select channel 5,

SOUND

Press to cycle through the

different sound settings.

press “5” button.

Select channel 62

press “6” button, and press “2”

button in 2 seconds.

Select channel 152

SLEEP

Press to setup the sleep time

ꢀꢁꢀꢀ

press “1” button, and press “5”

button, then press “2” button

in 2 seconds.

PICTURE SOUND SLEEP DISPLAY

DISPLAY

Press to enter the EPG menu

directly.

select channel “5-1”,

press “5” then “-/--” and “1”.

CH+

VOL+

MUTE

CH+/-

Channel/Program +/-

Return to the previous channel viewed.

CH-

VOL-

EXIT

MUTE

VOL+/-

Volume +/-

Press to mute the sound.

Press again or press VOL+ to

unmute.

Press to display the OSD menu.

THUMBSTICK

Allows you to navigate the

on-screen menus and adjust the

system settings to your

preference.

OK )

EXIT

Press to exit form the OSD menu.

SETUP

FAV

Press to display the closed caption.

MTS

EPG

MTS

Press to select the audio channels.

ZOOM

ANGLE

INTRO

LANGUAGE

PROGRAM

SUBTITLE

TITLE

SLOW

GOTO

A-B

EPG

Press to enter the EPG menu

directly.

REPEAT

FAV

Press to display teh favorite

channels list.

Universal Remote Code:11359

Universal Remote Control not included.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

INPUT

Number buttons for DVD.

Pressing “-/--”button to display

“SELECT 10+”, and press a

number button to play the program.

DISPLAY( In DVD)

Press to display the current mode’s

information.

LANGUAGE

ꢀꢁꢀꢀ

Select DVD disc language.

PICTURE SOUND SLEEP DISPLAY

ZOOM

Adjust picture size in DVD mode.

SUBTITLE

Select DVD disc subtitle.

CH+

VOL+

MUTE

SLOW

Play DVD programs at slow speed.

CH-

VOL-

EXIT

DVD play list/Disc menu

DVD eject.

ANGLE

Select DVD picture angle.

Play/Pause DVD program.

TITLE

DVD title.

Stop DVD program.

GOTO

Play your favorite title/chapter/track.

SETUP

DVD system setup.

PROGRAM

Select DVD picture angle.

INTRO

DVD fast reverse.

DVD fast forward.

Scan programs.

SETUP

FAV

REPEAT

MTS

EPG

Repeat playing the title or chapter.

A-B

DVD previous chapter.

DVD next chapter.

ZOOM

ANGLE

INTRO

LANGUAGE

PROGRAM

SUBTITLE

TITLE

SLOW

GOTO

A-B

Select and play the preferable

paragraph of DVD program by

pressing this key twice at the

beginning and end of it.

REPEAT

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Installing Batteries

1. Open the battery compartment cover on the back of the remote control.

2. Insert two 1.5V AAA size batteries observing the polarity markings inside the battery

compartment. Don’t mix different types or used batteries with new ones.

3. Close the cover.

- The remote control should be operated within 23 feet(7m) and 30⁰to the left and right of the

IR Receiver on the front of the TV.

- Used batteries should be disposed properly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

Power on/off

1. Connect to the power supply with the power cord.

2. -To turn on the TV

Press POWER button on the TV or remote control.

-To turn off the TV

Press POWER button on the TV or remote control.

Input Source select

Press INPUT button on the TV set or remote control to display input

source menu, and use CH+/- button on the TV set or

button

on remote control to select the input source, press OK button on the

remote control to enter.

DVD

Note: Before you select the input source, make sure the

connections are prepared.

Basic OSD Menu operation

Press MENU button to display the OSD menu as below:

Main menu

Picture

Sound

Use

button to select.

Channel

Parental

Setup

Press OK button

Others

Submenu

(Picture menu

for example)

Hint---you should operate the OSD menu according to the hint.

Use

In the submenu, use

or press

button to select the main menu, and press OK button to enter the submenu.

button to select the function item, press button to adjust/setup,

button to enter the submenu.

* (Press MENU button to return to the upper menu.)

* (Press EXIT button to exit the menu display.)

Note1: Only when you input the suitable signal, the relevant items can be activated.

Note2: Please operating the OSD menu according to hint on the bottom of the banner.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD Menu

1. Picture menu

Description

Picture Settings: Press

button to enter the Picture Settings menu.

Picture mode: Select between Dynamic, Standard,

Movie, User and Power Saving.

You may select the picture mode directly by pressing

the PICTURE button on the remote control.

Note: when select the "Power Saving", the

machine is in energy-saving status(4.1).

Brightness: Adjust brightness of the picture.

Contrast: Control the difference between the bright and

dark regions of the screen picture.

Color: Adjust color of the picture.

Tint: Control the fresh tones to make them appear natural.

Sharpness: Set the amount of fine detail in the picture.

Screen Size: Select the displaying mode of the picture between Wide, Cinema, Zoom, Normal

just scan.

PC Settings: If the video input signal comes from your PC, you may adjust the Vertical Position,

Horizontal Position, Clock, Phase or even perform an Auto adjustment.

Auto Adjust: Press OK button to setup the parameter of

the screen automatically.

Clock: Adjust the pixel clock frequency, until the image

size is maximized for the screen.

H/V Position: Adjust the transverse/vertical position of

the screen.

Phase: Adjust the phase of the ADC sampling clock

relative to the sync signal, until a stable image is obtained.

Reset: Press OK button to reset the settings.

Color Temp.: Select between Normal, Cool and Warm.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD Menu

Advanced Picture Settings: Press

button to enter the Advanced Picture Settings.

Dynamic Contrast: Select the dynamic contrast mode

between Off, Low, Medium and High.

Film Mode: Activate or deactivate the Film Mode.

Noise Reduction: If the broadcast signal received is

weak, you can select the DNR option to reduce the video

noise level between Off, Low, Medium and High.

MPEG Noise Reduction: Select the MPEG Noise

Reduction option to reduce the picture noise level

between Off, Low, Medium and High.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD Menu

2. Sound menu

Description

Sound Settings: Press

button to enter the Sound Settings menu.

Sound Mode: Select your desired picture mode as

follow: Dynamic, Standard, Soft and User.

You may select the sound mode directly by pressing

the SOUND button on the remote control.

Bass: Low frequency intensity.

Treble: High frequency intensity.

Balance: Left and right stereo audio channels balance.

Surround Mode: Activate or deactivate the Surround function.

AVL: Activate or deactivate the Auto Volume Limited function.

Analog Sound: Select the Analog Sound mode between Stereo, Mono and SAP.

Digital Sound: Select the Digital Sound laguage.

Digital Audio Output: Select the Digital Audio Output mode between PCM, RAW and off.

Equalizer Settings: Press

button to enter the Equalizer Settings menu.

Use / button to select the mode between User, Off,

Rock, Pop and Jazz.

You could press

button to enter the bottom item to

adjust the equalizer bu yourself when you select

the User mode.

Use

button to select the item, and use

button

to adjust. You could come back to the Mode selecting

item by pressing

button.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD Menu

3. Channel menu

Cable

Description

Channel List: Display the channel list.

Favorite List: Display the favorite channel list.

Channel Settings: Press > button to display the Channel Settings menu.

Press

button to select the item, and press OK button

to change the setting.

Signal Type: Allow you to select antenna between Air and Cable.

Auto Channel Search: Press OK button to start auto channel search.

µ If you select “Cable” as input signal in Antenna item, you

can press button to search the channels automatically.

The receivable channels will be stored automatically.

When searching channels, press MENU to stop.

If you select “Air” as input signal in Antenna item, you

can press button to search the channels automatically.

The receivable channels will be stored automatically.

When searching channels, press MENU to stop.

NOTE: It will take a while to auto scan in NTSC or ATSC

mode, please wait patiently.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD Menu

4. Parental Control menu

You must enter the password to gain access to the Parental Control menu. The default password

is 0000. You may modify the following options:

Description

V-CHIP: Press button to enter the V-CHIP menu.

US V-CHIP: Press

button to enter the US V-CHIP menu.

Movie Rating: The Movie rating (MPAA) is used for

original movies rated by the Motion Picture Association

of America (MPAA) as broadcasted on cable TV and

not edited for television.

Use

button to select G, PG, PG-13, R, NC-17

Ĥ 0 ĥ

or X.

G: General Audiences. Movie is appropriate for all ages.

PG: Parental Guideance Suggested. May contain material not

suited for younger viewers.

PG-13: Contains content that may not be appropriate for viewers

under the age of 13.

R: Restricted. Contains adult content, no one under 17 admitted

without parent.

NC-17: No one 17 and under admintted.

X: Adults only.

Ĥ 0 ĥ

TV Rating:Use

buttons to select the desired

rating and press

button to block or unblock rating.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD Menu

Canada V-CHIP: Press

V-CHIP menu.

button to enter the Canada

English Rating: Select among: C, C8+, G, PG,

14+ and 18+.

French Rating: Select among: G, 8ans+,

13ans+, 16ans+ and 18ans+.

Block UnRated Show: Activate or deactivate the Block UnRated Show function.

Downloadable Rating: Setting the Downloadable Rating in DTV mode when the program

has the rating information.

Clear Downloadable Data: Clear the downloadable data of the TV.

Note:The two operations above only valid when playing the downloadable data stream.

Change password: Change the password, you must enter

the new password twice to confirm it.

Note: Do not forget the password.

Keypad Lock: Invalidate the buttons one the TV set.

Source Lock: Invalidate the source input you select.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD Menu

5. Setup menu

Description

Closed Caption: Press

button to enter the Closed Caption menu.

Caption Display: Activate or deactivate the Caption

displaying.

Analog Caption Type: Allow you to select the basic

selection among: CC1, CC2, CC3, CC4, Text1, Text2,

Text3 and Text4.

Digital Caption Type: Allow you to select the advanced

selection among: Service1, Service2, Service3 Service4,

Service 5 and Service 6.

Digital CC Preset: Select the Digital CC Preset between

Default and Custom.

Digital CC Style: Setting the Digital CC Style.

Menu Language: Select OSD menu language.

Clock: Press button to enter the Clock menu.

Time zone: Select the time zone for the TV.

Auto Clock: Activate or deactivate the Auto Clock

function.

Setup Time:Display the setup time of the TV.

Day of Week: Display the day of week.

Daylight Saving Time: Activate or deactivate the

Daylight Saving Time function for the TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD Menu

6. Others menu

Description

Blue Screen: Turn on/off the blue screen function when there’s no signal.

No Signal Power Off: The TV will turn off automatically if there’s no signal after 10 minutes.

No Operation Power Off: The TV will turn off automatically if there’s no operation on the TV

after 3 hours.

All Reset: Reset all the settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation

Press the Power button on the TV or the remote control, then press the INPUT button to select DVD mode.

If there is no disc in the DVD player the screen will show "NO DISC".

Insert Disc according to picture next to disc slot.

Do not touch the playing surface.

Hold the disc around the outside with your fingers and place the disc into the slot. The player will

automatically draw the disc into the player.

To "Eject" the disc, press the EJECT button on the TV or the " " button on the remote control.

Audio

Using the DVD player

Most DVDs and your TV/DVD combo have region codes that help control illegal distribution of DVDs.

The region code for your TV/DVD combo is 1. You can only play DVDs with a region code of 1 or ALL.

The region code for a DVD is printed on the DVD or the DVD packaging.

4:3 pan scan

4:3 Letter Box

Wide

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation

or NO disc

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation

Download from Www.Somanuals.com. All Manuals Search And Download.

OSD Menu

Download from Www.Somanuals.com. All Manuals Search And Download.

Simple Troubleshooting

If the TV has failed or its performance has seriously deteriorated, check the TV by using

the following simple troubleshooting guide.

If you can not resolve the problem with this troubleshooting, please call RCA Technical

Support.

No power

- Check all power connections to the TV.

- Press either the power button or the Standby button on the Remote control.

No picture or sound

- Ensure that the TV is plugged in and the power is on.

- Ensure that the antenna is connected.

- Try a different program.

Poor picture quality

- Check the antenna connections.

- Check if the channel is tuned in properly.

- Adjust the picture settings: brightness, color, sharpness, contrast, or hue.

- Make sure that the TV is not located close to electrical appliances that may emit radio

frequency interference.

No color

- Adjust the color setting.

- Check if the program is color.

- Check if the cannel is tuned properly.

TV does not respond to remote control

- Check if no obstruction is between the remote control and the unit.

- Check if the remote control is within the range of operation.

- Check if the batteries in the remote control is weak or exhausted.

This TV is for household use and registered as harmless on electromagnetic waves.

Download from Www.Somanuals.com. All Manuals Search And Download.

LCD

32”(Diagonal)

1366x768

16:9

Viewing Picture Size (diagonal)

Resolution

Aspect Ratio

Display colours

Brightness

Contrast ratio

Response time

16.7M

350 cd/m²

3000:1

8ms

View angle

176⁰(H)/176⁰(V)

TV system

Digital TV: ATSC

Analog TV: NTSC

ATSC decode

NTSC

Video System MPEG-2MP@HL

Sound System AC-3

Video System NTSC

Sound System

MTS

Terminals

USB (Service port)

HDMI Input

VGA Input

PC Audio IN

Coax

Video

Audio (L/R)

YPbPr

Headphone out

Audio out

Others

Input Power Voltage

100-240V ȫ 50/60Hz

Power consumption

120W

Audio Output Power (THD İ7%)

2 x 8W

* Product specifications and appearance are subject to change without notice.

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC in the United States and other countries.

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED PRODUCT WARRANTY

RCA CANADA TV

EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THIS WARRANTY

DOES NOT COVER, AND AS DESCRIBED BELOW CURTIS INTERNATIONAL LTD EXPRESSLY DISCLAIMS, ALL ACTUAL AND

IMPLIED WARRANTIES AND CONDITIONS WITH RESPECT TO ANY PRODUCT USED FOR INSTITUTIONAL OR OTHER

COMMERCIAL PURPOSES (INCLUDING BUT NOT LIMITED TO RENTAL PURPOSES).

What your warranty covers:

•Defectsinmaterialsorworkmanshiptotheoriginalpurchaser.

For how long after purchase:

•Oneyearpartsandlabor.

What Curtis International Ltd. will do:

•AtCurtis’sdiscretion,payanAuthorizedCurtisServiceCentreforbothlaborchargesandpartstorepairyourtelevision,orreplaceyour

televisionwithaneworrefurbished/remanufacturedunit. See “How to get service”

How to get service:

•Call1-800-968-9853.Pleasehaveyourunit’sdateofpurchaseandmodel/serialnumberready. Themodel/serialnumberinformationcanbe

foundonthebackofyourunit.

•Arepresentativewilltroubleshootyourproblemoverthephone.

•Ifitisdeterminedthatyourunitrequiresservice,theservicelocationwillbeatthesolediscretionofCurtisbasedupontheCurtisLimited

Warrantystatement.

•AtthesolediscretionofCurtis,Televisionsareeitherconsumercarry-intoanAuthorizedCurtisServiceCentreordirectlyexchangedfora

neworrefurbished/remanufacturedunit.

•ProofofpurchaseintheformofanoriginalbillofsaleorreceiptedinvoicefromanAuthorizedDealerwhichisevidencethattheproductis

withinthewarrantyperiodmustbepresentedtoobtainwarrantyservice.

Your warranty does not cover damages which are caused by:

•Fire,accident,lightening,floodand/orotheractsofGod;

•Faultyinstallation,set-upadjustments,improperantenna,inadequatesignalreception,adjustmentofconsumercontrolsand/orimproper

maintenance;and/or

•Failurewhichresultsfrommisuse,abuse,neglect,mishandling,misapplication,and/oralteration.

What your warranty does not cover:

•Customerinstruction(YourOwner’sManualdescribeshowtoinstall,adjust, andoperateyourunit.Anyadditionalinformationshouldbe

obtainedfromyourdealer);

•TransportationcosttoandfromtheServiceCentre(Unlessyouhavemadeotherarrangementswithyourdealeratthetimeofpurchase

wherebyheundertakesthisresponsibility);

•Installationandset-upserviceadjustments;

•ProductsconnectedotherwisethanasoutlinedintheOwner’sManual;

•Productsonwhichtheserialnumberhasbeenalteredorremoved;

•Externalantennaorcablesystems;

•Remotecontrol&batteries;

•Atelevisionthathasbeenmodifiedorincorporatedintootherproductsorisusedforinstitutionalorothercommercialpurposes(includingbut

notlimitedtorentalpurposes);

•AunitpurchasedorservicedoutsideCanada;

•Special, incidentalorconsequentialdamages;and/or

•Normalwearorcosmeticdamage.

If you purchased your unit outside of Canada:

•Thiswarrantydoesnotapply. Contactyourdealerforwarrantyinformation.

315 Attwell Drive, Toronto, Ontario M9W 5C1

www.curtisint.com

“RCA”, “NIPPER&CHIPPER”ARETRADEMARKSOFRCATRADEMARKMANAGEMENT USEDUNDERLICENSETO:

CURTISINTERNATIONALLTD.

Download from Www.Somanuals.com. All Manuals Search And Download.

QSC Audio Speaker WL218 sw User Guide
ResMed Sleep Apnea Machine S9 VPAP S User Guide
Roadmaster Speaker VRA10PSW User Guide
Roland Electronic Keyboard RP201 User Guide
Rosewill Beverage Dispenser RCX Z940 LX User Guide
Samsung All in One Printer SCX 4521F User Guide
Samsung Printer 550 User Guide
Samsung Printer ML 3051N User Guide
Samsung Security Camera SCC B2303P User Guide
Sears Automobile Electronics 13953876 User Guide