RCA Flat Panel Television J26C700 User Guide

LCD Television  
User’s Guide  
Commercial Television  
J22C760 J26C700  
J32C750 J42C750  
Changing Entertainment. Again.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Information  
CAUTION  
Do not attempt to modify this product in any way without written authorization from RCA.  
Unauthorized modification could void the user’s authority to operate this product.  
CAUTION  
THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE  
THE RISK OF ELECTRIC SHOCK, DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE  
OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.  
WARNING  
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall  
not be placed on the apparatus.  
CAUTION  
When used outside of U.S., other power supply cords may be used if the cord is approved by the local regu-  
lating agency.  
CLEANING AND DISINFECTION  
Clean the exterior of this television by removing dust with a lint-free cloth.  
CAUTION: To avoid damage to the surface of the television, do not use abrasive or chemical cleaning agents.  
This apparatus with class I construction shall be connected to a main socket outlet with a protective earthing  
connection.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Information  
DISCONNECTING DEVICE FROM MAINS  
Main plug is the disconnecting device. The plug must remain readily operable.  
IMPORTANT SAFEGUARDS FOR YOU AND YOUR NEW PRODUCT  
YOUR PRODUCT HAS BEEN MANUFACTURED AND TESTED WITH YOUR SAFETY IN MIND. HOWEVER,  
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. TO AVOID DEFEATING  
THE SAFEGUARDS THAT HAVE BEEN BUILT INTO YOUR NEW PRODUCT, PLEASE READ AND OBSERVE THE  
FOLLOWING SAFETY POINTS WHEN INSTALLING AND USING YOUR NEW PRODUCT, AND SAVE THEM FOR  
FUTURE REFERENCE. OBSERVING THE SIMPLE PRECAUTIONS DISCUSSED IN THIS MANUAL CAN HELP YOU  
GET MANY YEARS OF ENJOYMENT AND SAFE OPERATION THAT ARE BUILT INTO YOUR NEW PRODUCT.  
Note  
-
-
-
If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there  
is nothing wrong with the TV.  
Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.  
However, they have no adverse effect on the TVs performance.  
Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may  
produce some temporary distortion effects on the screen.  
REGULATORY INFORMATION  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference when the equipment  
is operated in a residential installation.  
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in  
accordance with the instruction manual, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation.  
If this equipment does cause harmful interference to radio or television reception, which can be determined  
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
CAUTION  
Changes or modifications not expressly approved by the party responsible for compliance could void the  
user’s authority to operate the equipment.  
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE  
(RCA Commercial Electronics)  
(TELEPHONE NO : 800-RCA-2161)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Read before operating equipment  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
13. Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has  
been damaged in any way, such as powersupply  
cord or plug is damaged, liquid has been spilled  
or objects have fallen into the apparatus, the  
apparatus has been exposed to rain or moisture,  
does not operate normally, or has been dropped.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
15. If an outside antenna or cable system is connect-  
ed to the product, be sure the antenna or cable  
system is grounded so as to provide some pro-  
tection against voltage surges and built-up static  
charges. Section 810 of the National Electrical  
Code, ANSI/NFPA No. 70-1984 (Section 54 of  
Canadian Electrical Code, Part 1) provides infor-  
mation with respect to proper grounding of the  
mast and supporting structure, grounding of the  
leadin wire to an antenna-discharge unit, size of  
grounding conductors, location of antenna-dis-  
charge unit, connection to grounding electrodes,  
and requirements for the grounding electrode.  
See following example.  
7. Do not block any ventilation openings.  
Install in accordance with the manufacturer’s  
instructions.  
8. Do not install near any heat sources such as radi-  
ators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polar-  
ized or grounding-type plug. A polarized plug  
has two blades with one wider than the other.  
A grounding type plug has two blades and a  
third grounding prong. The wide blade or the  
third prong is provided for your safety. If the  
provided plug does not fit into your outlet, con-  
sult an electrician for replacement of the obso-  
lete outlet.  
10. Protect the power cord from being walked on or  
pinched particularly at plugs, convenience recep-  
tacles, and the point where they exit from the  
apparatus.  
11. Only use attachments/accessories specified by the  
manufacturer.  
12. Use only with the cart, stand, tri-  
pod, bracket, or table specified by  
the manufacturer, or sold with  
the apparatus. When a cart is  
used, use caution when moving  
the cart/apparatus combination to  
avoid injury from tip-over.  
Note  
-
The lamp in this product contains mercury. Please dispose of in accordance with local, state, or federal  
laws.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Important Information ..............................................2  
IMPORTANT SAFETY INSTRUCTIONS ........................5  
On Screen Menus ....................................................45  
Setting up the TV Channel ....................................46  
Auto Scan........................................................46  
Add / Delete a Channel..................................47  
Picture Controls ........................................................48  
Adjusting The Picture Controls ....................48  
Manual Picture Controls ................................49  
Gamma............................................................50  
Color Temperature ........................................51  
Reset Picture Mode ........................................52  
Advanced Video ......................................................53  
Dynamic Noise Reduction..............................53  
CTI (Color Transient Intensity) ......................54  
Flesh Tone ......................................................54  
Adaptive Luma Control..................................55  
Blue Mute ......................................................55  
Back Light ......................................................56  
Screen Mode ..................................................57  
Sound Controls ........................................................58  
Adjusting The Sound Controls ......................58  
Manual Sound Controls ................................59  
Sound Surround ............................................60  
Equalizer ........................................................60  
Digital Output ................................................61  
Stereo/SAP Broadcast Setup ..........................62  
Audio Language ............................................62  
Time Setting ............................................................63  
Time Zone Settings ........................................63  
Auto Time Settings ........................................64  
Manual Time Settings ....................................65  
Auto On /Off Time Settings ..........................66  
Sleep Timer ....................................................67  
Captions ....................................................................68  
Closed Caption - Analog................................68  
Closed Caption - Digital ................................69  
Digital Closed Caption Options ....................70  
Reset ........................................................................71  
Reset Default..................................................71  
Parental Control ......................................................72  
Entering your password ................................72  
Set Password ..................................................72  
Ratings - Enable / Disable ..............................73  
TV Ratings for USA ........................................74  
Movie Ratings ................................................76  
English TV Ratings for Canada......................77  
French TV Ratings for Canada ......................78  
Downloadable Rating....................................79  
Block Unrated ................................................80  
Clean All..........................................................80  
Setting the PC Mode................................................81  
Automatic Screen Adjustment ......................81  
Manual Screen Adjustment ..........................82  
USB Functions ..........................................................83  
Picture Function ............................................83  
Music Function ..............................................84  
Specification ............................................................85  
Chapter 1: Connections and Setup  
Things to Consider Before You Connect ..................7  
Protect Against Power Surges ........................7  
Protect Devices from Overheating..................7  
Position Cables Properly to Avoid Audio  
Interference ......................................................7  
Use Indirect Light ............................................7  
Remote Control................................................7  
Check Supplied Parts........................................7  
Controls And Connectors ..........................................8  
Front Panel - J22C760 ......................................8  
Rear Panel - J22C760........................................9  
Front Panel - J26C700 ....................................10  
Rear Panel - J26C700......................................11  
Front Panel - J32C750 ....................................12  
Rear Panel - J32C750......................................13  
Front Panel - J42C750 ....................................14  
Rear Panel - J42C750......................................15  
Connections ..............................................................16  
Wall mount Installation ................................16  
Desktop Pedestal Installation........................16  
Parts for stand assembly................................17  
Stand Installation ..........................................19  
Antenna Connection......................................22  
VCR Connection..............................................23  
DVD Connection ............................................25  
HDSTB Connection ........................................26  
External A/V Source........................................29  
Digital Audio Out ..........................................30  
PC Connection ................................................31  
Resolution ......................................................33  
USB in Setup ..................................................33  
Chapter 2: Using the Remote Control  
Basic(User) Remote ........................................34  
Master(Installer) Remote ..............................35  
Put Batteries in the Remote ..........................35  
Chapter 3: Using USB Clone Tool  
USB Cloner Out-looking ................................36  
Errors Table ....................................................36  
Learning Connection ....................................37  
Teaching Connection......................................39  
Chapter 4: Basic Operation  
Plug in the TV ................................................40  
Turn on the TV................................................40  
Channel Scan ..................................................40  
Channel Selection ..........................................40  
Volume Adjustment ......................................40  
Sound Mute....................................................40  
Source Selection ............................................41  
Language Selection........................................41  
Chapter 7: Other Information  
Chapter 5: Commercial Interface Menus  
Commercial Interface Menus ..................................42  
Chapter 6: Using the TV's Features  
Troubleshooting ......................................................89  
Limited Warranty ....................................................90  
Care and Cleaning....................................................91  
CHILD SAFETY ..........................................................92  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
"User must use shielded signal interface cables with ferrite cores to maintain standard compliance for the product"  
Things to Consider Before You Connect  
Protect Against Power Surges  
Connect all devices before you plug any of their power cords into the wall outlet or power strip. NEVER  
plug your TV into an outlet that is controlled by a wall switch.  
Turn off the TV and/or device(s) before you connect or disconnect any cables.  
Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions at  
the beginning of the User's Guide.  
Protect Devices from Overheating  
Don’t block ventilation holes on any of the devices. Arrange the devices so that air can circulate freely.  
Don’t stack devices.  
If you place devices in a stand, make sure you allow adequate ventilation.  
If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it won’t flow  
around other devices.  
Position Cables Properly to Avoid Audio Interference  
Insert each cable firmly into the designated jack.  
If you place devices above the TV, route all cables down the side of the back of the TV instead of straight  
down the middle.  
If your antenna uses 300-ohm twin lead cables, do not coil the cables. Also, keep the twin lead cables  
away from audio/video cables.  
Use Indirect Light  
Don’t place the TV where sunlight or room lighting will be directed toward the screen. Use soft or indirect  
lighting.  
Remote Control  
You will need a master remote or USB Cloner to set up the TV. Contact your RCA Commercial Distributor to  
purchase these.  
Check Supplied Parts  
Check that the following parts were packed with your product.  
Power Cord  
Owner’s Manual  
Stand Base  
(Optional)  
Stand Body  
(Optional)  
Note  
-
If you need to replace your remote, call 800-RCA-2161. A shipping and handling fee, and the appropriate  
sales tax, will be charged upon ordering. Have your Visa, MasterCard, or Discover Card ready.  
Stand Base, Stand Body images shown may differ from your TV.  
-
Graphics contained within this publication are for representation only.  
Chapter 1  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Front Panel - J22C760  
CH  
VOL  
SOURCE MENU  
1
2
3
4
5
6
1. VOL- / VOL+  
Adjusts sound level and menu settings.  
2. CH  
/ CH  
Select a channel.  
3. SOURCE  
Selects the TV, AV1, AV2, YPbPr, VGA, HDMI or USB mode.  
4. MENU  
Display on screen menus.  
5. POWER  
Switches the set on or off.  
6. Power Indicator  
Illuminates to bright blue when the TV is on. When the TV is powered off, this LED is also off.  
Remote control sensor  
Accepts the IR signal of remote controller.  
Note  
-
Image shown may differ from your TV.  
8
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Rear Panel - J22C760  
USB IN  
10  
11  
COMPONENT IN  
SERVICE  
HDMI/DVI  
IN  
RGB IN  
(PC)  
AC IN  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
DIGITAL AUDIO  
OUT(COAXIAL)  
L
R
AV1  
L
AUDIO  
R
Y
Pb  
Pr  
VIDEO  
AUDIO  
VIDEO  
1
2
3
4
5
6
7
8
9
1. AC IN  
7. AUDIO IN (RGB/DVI)  
This TV operates on AC power.  
Connect to the audio output jack on your PC.  
2. HDMI/DVI IN  
8. ANTENNA/CABLE IN  
Connect to the HDMI jack on devices with an  
HDMI output.  
Connect to your antenna or cable box for TV sig-  
nal.  
This input can also be used as a DVI connection  
with separate analog audio inputs.  
9. DIGITAL AUDIO OUT(COAXIAL)  
Connect digital audio to various types of equip-  
ment.  
3. RGB IN (PC)  
Connect to the video output jack on your PC.  
10.USB IN  
4. COMPONENT IN (YPbPr)  
USB device interface.  
Video/Audio inputs for Component.  
11.AV2  
5. SERVICE  
Connects to your Audio/Video devices using a  
composite (Yellow/Red/White) cable.  
Used by clone device to learn settings in TV.  
6. AV1  
Connects to your Audio/Video devices using a  
composite (Yellow/Red/White) cable.  
Note  
-
Image shown may differ from your TV.  
Chapter 1  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Front Panel - J26C700  
6
VOL  
CH  
SOURCE MENU  
VOL  
CH  
SOURCE MENU  
1
2
3
4
5
1. VOL- / VOL+  
Adjusts sound level and menu settings.  
2. CH  
/ CH  
Select a channel.  
3. SOURCE  
Selects the TV, AV1, AV2, YPbPr, VGA, HDMI or USB mode.  
4. MENU  
Display on screen menus.  
5. POWER  
Switches the set on or off.  
6. Power Indicator  
Illuminates to bright blue when the TV is on. When the TV is powered off, this LED is also off.  
Remote control sensor  
Accepts the IR signal of remote controller.  
Note  
-
Image shown may differ from your TV.  
10  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Rear Panel - J26C700  
USB IN  
10  
11  
COMPONENT IN  
HDMI/DVI  
IN  
RGB IN  
(PC)  
AC IN  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
DIGITAL AUDIO  
OUT(COAXIAL)  
L
R
AV1  
L
SERVICE  
AUDIO  
R
Y
Pb  
Pr  
VIDEO  
VIDEO  
AUDIO  
1
2
3
4
5
6
7
8
9
1. AC IN  
6. AUDIO IN (RGB/DVI)  
This TV operates on AC power.  
Connect to the audio output jack on your PC.  
2. HDMI/DVI IN  
7. ANTENNA/CABLE IN  
Connect to the HDMI jack on devices with an  
HDMI output.  
Connect to your antenna or cable box for TV sig-  
nal.  
This input can also be used as a DVI connection  
with separate analog audio inputs.  
8. DIGITAL AUDIO OUT(COAXIAL)  
Connect digital audio to various types of equip-  
ment.  
3. RGB IN (PC)  
Connect to the video output jack on your PC.  
9. SERVICE  
4. COMPONENT IN (YPbPr)  
Used by clone device to learn settings in TV.  
Video/Audio inputs for Component.  
10.USB IN  
5. AV1  
USB device interface.  
Connects to your Audio/Video devices using a  
composite (Yellow/Red/White) cable.  
11.AV2  
Connects to your Audio/Video devices using a  
composite (Yellow/Red/White) cable.  
Note  
-
Image shown may differ from your TV.  
Chapter 1  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Front Panel - J32C750  
VOL  
CH  
SOURCE MENU  
6
VOL  
CH  
SOURCE MENU  
1
2
3
4
5
1. VOL- / VOL+  
Adjusts sound level and menu settings.  
2. CH  
/ CH  
Select a channel.  
3. SOURCE  
Selects the TV, AV1, AV2, YPbPr, VGA, HDMI or USB mode.  
4. MENU  
Display on screen menus.  
5. POWER  
Switches the set on or off.  
6. Power Indicator  
Illuminates to bright blue when the TV is on. When the TV is powered off, this LED is also off.  
Remote control sensor  
Accepts the IR signal of remote controller.  
Note  
-
Image shown may differ from your TV.  
12  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Rear Panel - J32C750  
USB IN  
10  
11  
COMPONENT IN  
HDMI/DVI  
IN  
RGB IN  
(PC)  
AC IN  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
DIGITAL AUDIO  
OUT(COAXIAL)  
L
R
AV IN  
L
SERVICE  
AUDIO  
R
Y
Pb  
Pr  
VIDEO  
VIDEO  
AUDIO  
1
2
3
4
5
6
7
8
9
1. AC IN  
6. AUDIO IN (RGB/DVI)  
This TV operates on AC power.  
Connect to the audio output jack on your PC.  
2. HDMI/DVI IN  
7. ANTENNA/CABLE IN  
Connect to the HDMI jack on devices with an  
HDMI output.  
Connect to your antenna or cable box for TV sig-  
nal.  
This input can also be used as a DVI connection  
with separate analog audio inputs.  
8. DIGITAL AUDIO OUT(COAXIAL)  
Connect digital audio to various types of equip-  
ment.  
3. RGB IN (PC)  
Connect to the video output jack on your PC.  
9. SERVICE  
4. COMPONENT IN (YPbPr)  
Used by clone device to learn settings in TV.  
Video/Audio inputs for Component.  
10.USB IN  
5. AV1  
USB device interface.  
Connects to your Audio/Video devices using a  
composite (Yellow/Red/White) cable.  
11.AV2  
Connects to your Audio/Video devices using a  
composite (Yellow/Red/White) cable.  
Note  
-
Image shown may differ from your TV.  
Chapter 1  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Front Panel - J42C750  
VOL  
CH  
SOURCE MENU  
6
VOL  
CH  
SOURCE MENU  
1
2
3
4
5
1. VOL- / VOL+  
Adjusts sound level and menu settings.  
2. CH  
/ CH  
Select a channel.  
3. SOURCE  
Selects the TV, AV1, AV2, YPbPr, VGA, HDMI or USB mode.  
4. MENU  
Display on screen menus.  
5. POWER  
Switches the set on or off.  
6. Power Indicator  
Illuminates to bright blue when the TV is on. When the TV is powered off, this LED is also off.  
Remote control sensor  
Accepts the IR signal of remote controller.  
Note  
-
Image shown may differ from your TV.  
14  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Rear Panel - J42C750  
11  
1
10  
COMPONENT IN  
HDMI/DVI  
IN  
RGB IN  
(PC)  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
DIGITAL AUDIO  
OUT(COAXIAL)  
L
R
AV1  
L
SERVICE  
AUDIO  
R
Y
Pb  
Pr  
VIDEO  
VIDEO  
AUDIO  
2
3
4
5
6
7
8
9
1. AC IN  
6. AUDIO IN (RGB/DVI)  
This TV operates on AC power.  
Connect to the audio output jack on your PC.  
2. HDMI/DVI IN  
7. ANTENNA/CABLE IN  
Connect to the HDMI jack on devices with an  
HDMI output.  
Connect to your antenna or cable box for TV sig-  
nal.  
This input can also be used as a DVI connection  
with separate analog audio inputs.  
8. DIGITAL AUDIO OUT(COAXIAL)  
Connect digital audio to various types of equip-  
ment.  
3. RGB IN (PC)  
Connect to the video output jack on your PC.  
9. SERVICE  
4. COMPONENT IN (YPbPr)  
Used by clone device to learn settings in TV.  
Video/Audio inputs for Component.  
10.USB IN  
5. AV1  
USB device interface.  
Connects to your Audio/Video devices using a  
composite (Yellow/Red/White) cable.  
11.AV2  
Connects to your Audio/Video devices using a  
composite (Yellow/Red/White) cable.  
Note  
-
Image shown may differ from your TV.  
Chapter 1  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Wall mount Installation  
4 inches  
4 inches  
4 inches  
4 inches  
4 inches  
The set can be installed on a wall as shown above.  
For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.  
Detailed instructions are available from your dealer, refer to the optional Wall Mounting Bracket Installation  
and Setup Guide. (Wall Mount Sold Separately)  
Note  
-
This Television should be installed by a Qualified Service Personnel.  
Desktop Pedestal Installation  
4 inches  
4 inches  
4 inches  
4 inches  
The set can be mounted on a desk as shown above.  
For proper ventilation, allow a clearance of 4 inches on each side from the wall.  
Detailed instructions are available from your dealer.  
Note  
-
Image shown may differ from your TV.  
16  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Parts for stand assembly - 22 inch  
TV  
Stand Body  
Stand Base  
4 - A type bolts  
4 - B type bolts  
Parts for stand assembly - 26 inch  
TV  
Stand Body  
Stand Base  
4 - A type bolts  
4 - B type bolts  
Chapter 1  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Parts for stand assembly - 32/42 inches  
TV  
Stand Body  
Stand Base  
4 - A type bolts  
4 - B type bolts  
18  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Stand Installation - 22 inch  
Stand  
body  
Stand  
base  
1. Carefully place the product screen  
side down on a cushioned surface  
that will protect the product and  
screen from damage.  
2. Using the screws provided assemble  
the stand body with the stand base as  
shown.  
3. Assemble the product stand with the  
product as shown.  
4. Install the 4 bolts securely, in the back  
of the product in the holes provided.  
Note  
Image shown may differ from your TV.  
-
Chapter 1  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Stand Installation - 26 inch  
Stand  
body  
Stand  
base  
1. Carefully place the product screen  
side down on a cushioned surface  
that will protect the product and  
screen from damage.  
2. Using the screws provided assemble  
the stand body with the stand base as  
shown.  
3. Assemble the product stand with the  
product as shown.  
4. Install the 4 bolts securely, in the back  
of the product in the holes provided.  
Note  
-
Image shown may differ from your TV.  
20  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Stand Installation - 32/42 inches  
Stand  
body  
Stand  
base  
1. Carefully place the product screen  
side down on a cushioned surface  
that will protect the product and  
screen from damage.  
2. Using the screws provided assemble  
the stand body with the stand base as  
shown.  
3. Remove the included stand cover  
from the product.  
4. Assemble the product stand with the  
product as shown.  
5. Install the 4 bolts securely, in the back  
of the product in the holes provided.  
Note  
-
-
Image shown may differ from your TV.  
When mounting TV on the wall, install the included Stand Cover over the hole for the stand. Press the  
Stand Cover into the TV until you hear it click.  
Chapter 1  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Antenna Connection  
Multi-family Dwellings/ Apartments  
(Connect to wall antenna socket)  
Rear panel of the set  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
DIGITAL AUDIO  
OUT(COAXIAL)  
AV1  
L
VIDEO  
R
AUDIO  
Wall Antenna Socket  
RF Coaxial Wire (75 ohm)  
Turn clockwise to tighten.  
VHF  
UHF  
Outdoor Antenna  
Be careful not to bend the bronze wire when  
connecting to an antenna port.  
* Separately purchase a RF Coaxial Wire(75 ohm)  
Single-family Dwellings /Houses  
(Connect to wall jack for outdoor antenna)  
Rear panel of the set  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
DIGITAL AUDIO  
OUT(COAXIAL)  
AV1  
L
Note  
VIDEO  
R
AUDIO  
-
To improve the picture quality in a poor signal  
area, please purchase a signal amplifier and  
install properly.  
VHF  
UHF  
-
If the antenna is not installed properly, contact  
your dealer for assistance.  
Signal  
Amplifier  
22  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
VCR Connection  
- To avoid picture noise (interference), leave an adequate distance between the TV and the VCR.  
A
When connecting with an antenna  
1. Connect the Antenna out socket of the VCR to  
the Antenna input socket on the TV.  
VCR  
2. Power up the VCR and Television.  
ANT IN  
(R) AUDIO (L)  
VIDEO  
OUT  
IN  
ANT OUT  
S-VIDEO  
3. Tune the TV to the channel output by the VCR.  
(typically ch.3 or 4.)  
4. Refer to the VCR manual for operating instruc-  
tions.  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
DIGITAL AUDIO  
OUT(COAXIAL)  
AV1  
L
VIDEO  
R
AUDIO  
Rear panel of the set  
A
When connecting with an RCA cable - 22/26 inches  
VCR  
1. Connect the AUDIO/VIDEO jacks between TV and  
VCR. Match the jack colors (Video = yellow, Audio  
Left = white, and Audio Right = red)  
ANT IN  
VIDEO (L) AUDIO (R)  
OUT  
IN  
ANT OUT  
S-VIDEO  
2. Insert a video tape into the VCR and press PLAY  
OUTPUT  
SWITCH  
on the VCR.  
3. Select the AV1 or AV2 input source using the  
INPUT button on the remote control.  
USB IN  
4. Refer to the VCR manual for operating instruc-  
tions.  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
AV1  
L
VIDEO  
R
AUDIO  
Rear panel of the set  
Side panel of the set  
Chapter 1  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
A
When connecting with an RCA cable - 32 inch  
VCR  
1. Connect the AUDIO/VIDEO jacks between TV and  
VCR. Match the jack colors (Video = yellow, Audio  
Left = white, and Audio Right = red)  
ANT IN  
VIDEO (L) AUDIO (R)  
OUT  
IN  
ANT OUT  
S-VIDEO  
2. Insert a video tape into the VCR and press PLAY  
OUTPUT  
SWITCH  
on the VCR.  
3. Select the AV1 or AV2 input source using the  
INPUT button on the remote control.  
USB IN  
4. Refer to the VCR manual for operating instruc-  
tions.  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
AV1  
L
VIDEO  
R
AUDIO  
Rear panel of the set  
Side panel of the set  
A
When connecting with an RCA cable - 42 inch  
1. Connect the AUDIO/VIDEO jacks between TV and  
VCR. Match the jack colors (Video = yellow, Audio  
Left = white, and Audio Right = red)  
ANT IN  
VCR  
VIDEO (L) AUDIO (R)  
OUT  
IN  
ANT OUT  
S-VIDEO  
OUTPUT  
SWITCH  
2. Insert a video tape into the VCR and press PLAY  
on the VCR.  
3. Select the AV1 or AV2 input source using the  
INPUT button on the remote control.  
4. Refer to the VCR manual for operating instruc-  
tions.  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
AV1  
L
VIDEO  
R
AUDIO  
Rear panel of the set  
Side panel of the set  
24  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
DVD Connection  
A
When connecting with a HDMI cable  
1. Connect the HDMI output of the DVD to the  
DVD  
HDMI/DVI IN jack on the set.  
HDMI-DVD OUTPUT  
2. Select HDMI input source using the INPUT button  
on the remote control.  
3. Refer to the DVD player's manual for operating  
instructions.  
COMPONENT IN  
HDMI/DVI  
IN  
RGB IN  
(PC)  
L
R
AUDIO  
Y
Pb  
Pr  
VIDEO  
Rear panel of the set  
A
When connecting with a Component cable  
DVD  
1. Connect the video outputs (Y, PB, PR) of the DVD  
to the COMPONENT VIDEO(Y, Pb, Pr) jacks on  
the set.  
(L) AUDIO (R)  
Y
Pb  
Pr  
2. Connect the audio outputs of the DVD to the  
COMPONENT AUDIO L, R jacks on the set.  
3. Turn on the DVD player, insert a DVD.  
4. Select YPbPr source using the INPUT button on  
COMPONENT IN  
the remote control.  
HDMI/DVI  
IN  
RGB IN  
(PC)  
L
R
AUDIO  
5. Refer to the DVD player's manual for operating  
instructions.  
Y
Pb  
VIDEO  
Pr  
Rear panel of the  
set  
Chapter 1  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
HDSTB Connection  
-
This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box.  
However, if you do receive Digital signals from a digital set-top box or other digital external device, refer  
to the figure as shown below.  
A
When connecting with a D-Sub 15 pin cable - 26/32/42 inches  
Digital Set-top Box  
1. Connect the RGB output of the digital set-top  
box to the RGB IN (PC) jack on the set.  
(R) AUDIO (L)  
RGB-DTV OUTPUT  
2. Connect the audio outputs of the set-top box to  
the AUDIO IN (RGB/DVI) jack on the set.  
3. Turn on the digital set-top box.  
4. Select VGA input source using the INPUT button  
on the remote control.  
5. Refer to the digital set-top box manual for oper-  
ating instructions.  
COMPONENT IN  
RGB IN  
(PC)  
AUDIO IN  
(RGB/DVI)  
L
R
AV1  
AUDIO  
Y
Pb  
Pr  
VIDEO  
L
R
VIDEO  
AUDIO  
Rear panel of the set  
A
When connecting with a D-Sub 15 pin cable - 22 inch  
Digital Set-top Box  
1. Connect the RGB output of the digital set-top  
box to the RGB IN (PC) jack on the set.  
(R) AUDIO (L)  
RGB-DTV OUTPUT  
2. Connect the audio outputs of the set-top box to  
the AUDIO IN (RGB/DVI) jack on the set.  
3. Turn on the digital set-top box.  
4. Select VGA input source using the INPUT button  
on the remote control.  
5. Refer to the digital set-top box manual for oper-  
ating instructions.  
COMPONENT IN  
SERVICE  
RGB IN  
(PC)  
AUDIO IN  
(RGB/DVI)  
L
R
AV1  
L
AUDIO  
VIDEO  
AUDIO  
R
Y
Pb  
Pr  
VIDEO  
Rear panel of the set  
26  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A
When connecting with a HDMI to DVI cable - 26/32/42 inches  
1. Connect the DVI output of the digital set-top box  
to the HDMI/DVI IN jack on the set.  
Digital Set-top Box  
DVI-DTV OUTPUT  
(R) AUDIO (L)  
2. Connect the audio outputs of the set-top box to  
the AUDIO IN (RGB/DVI) jack on the set.  
3. Turn on the digital set-top box.  
4. Select HDMI input source using the INPUT button  
on the remote control.  
5. Refer to the digital set-top box manual for oper-  
ating instructions.  
COMPONENT IN  
HDMI/DVI  
IN  
RGB IN  
(PC)  
AUDIO IN  
(RGB/DVI)  
L
R
AV1  
L
AUDIO  
VIDEO  
R
Y
Pb  
Pr  
VIDEO  
AUDIO  
Rear panel of the set  
A
When connecting with a HDMI to DVI cable - 22 inch  
1. Connect the DVI output of the digital set-top box  
to the HDMI/DVI IN jack on the set.  
Digital Set-top Box  
DVI-DTV OUTPUT  
(R) AUDIO (L)  
2. Connect the audio outputs of the set-top box to  
the AUDIO IN (RGB/DVI) jack on the set.  
3. Turn on the digital set-top box.  
4. Select HDMI input source using the INPUT button  
on the remote control.  
5. Refer to the digital set-top box manual for oper-  
ating instructions.  
COMPONENT IN  
SERVICE  
HDMI/DVI  
IN  
RGB IN  
(PC)  
AUDIO IN  
(RGB/DVI)  
L
R
AV1  
L
AUDIO  
VIDEO  
AUDIO  
R
Y
Pb  
Pr  
VIDEO  
Rear panel of the set  
Chapter 1  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
A
When connecting with a Component cable  
Digital Set-top Box  
1. Connect the video outputs (Y, PB, PR) of the digi-  
tal set-top box to the COMPONENT VIDEO(Y,  
Pb, Pr) jacks on the set.  
(L) AUDIO (R)  
Y
Pb  
Pr  
2. Connect the audio outputs of the digital set-top  
box to the COMPONENT AUDIO L, R jacks on the  
set.  
3. Turn on the digital set-top box.  
4. Select YPbPr source using the INPUT button on  
COMPONENT IN  
the remote control.  
HDMI/DVI  
IN  
RGB IN  
(PC)  
L
R
AUDIO  
Y
Pb  
VIDEO  
Pr  
5. Refer to the digital set-top box manual for oper-  
ating instructions.  
Rear panel of the set  
A
When connecting with a HDMI cable  
1. Connect the HDMI output of the digital set-top  
Digital Set-top Box  
box to the HDMI/DVI IN jack on the set.  
HDMI-DTV OUTPUT  
2. Turn on the digital set-top box.  
3. Select HDMI input source using the INPUT button  
on the remote control.  
4. Refer to the digital set-top box manual for oper-  
ating instructions.  
COMPONENT IN  
HDMI/DVI  
IN  
RGB IN  
(PC)  
L
R
AUDIO  
Y
Pb  
Pr  
VIDEO  
Rear panel of the set  
28  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
External A/V Source - 22/26 inches  
1. Connect the AUDIO/VIDEO jacks between TV and  
external equipment. Match the jack colors (Video  
= yellow, Audio Left = white, and Audio Right =  
red)  
Camcorder  
Video game set  
VIDEO  
L-AUDIO-R  
OUT  
2. Select the AV1 or AV2 input source using the  
INPUT button on the remote control.  
3. Operate the corresponding external equipment.  
USB IN  
4. Refer to the external equipment manual for oper-  
ating instructions.  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
AV1  
VIDEO  
L
R
AUDIO  
Rear panel of the set  
Side panel of the set  
External A/V Source - 32 inch  
1. Connect the AUDIO/VIDEO jacks between TV and  
external equipment. Match the jack colors (Video  
= yellow, Audio Left = white, and Audio Right =  
red)  
Camcorder  
Video game set  
VIDEO  
L-AUDIO-R  
OUT  
2. Select the AV1 or AV2 input source using the  
INPUT button on the remote control.  
3. Operate the corresponding external equipment.  
USB IN  
4. Refer to the external equipment manual for oper-  
ating instructions.  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
AV1  
VIDEO  
L
R
AUDIO  
Rear panel of the set  
Side panel of the set  
Chapter 1  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
External A/V Source - 42 inch  
Camcorder  
Video game set  
1. Connect the AUDIO/VIDEO jacks between TV and  
external equipment. Match the jack colors (Video  
= yellow, Audio Left = white, and Audio Right =  
red)  
VIDEO  
L-AUDIO-R  
OUT  
2. Select the AV1 or AV2 input source using the  
INPUT button on the remote control.  
3. Operate the corresponding external equipment.  
4. Refer to the external equipment manual for oper-  
ating instructions.  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
AV1  
VIDEO  
L
R
AUDIO  
Rear panel of the set  
Side panel of the set  
Digital Audio Out  
Audio Equipment  
1. Connect one end of the optical cable to the TV’s  
DIGITAL AUDIO OUT(OPTICAL) port.  
DIGITAL AUDIO  
IN(COAXIAL)  
2. Connect the other end of the optical cable to the  
digital audio input on the audio equipment.  
3. Refer to the external audio equipment manual  
for operation.  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
DIGITAL AUDIO  
OUT(COAXIAL)  
AV1  
L
VIDEO  
R
AUDIO  
Rear panel of the set  
30  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
PC Connection  
A
When connecting with a D-Sub 15 pin cable - 26/32/42 inches  
1. Connect the RGB output of the PC to the RGB IN  
(PC) jack on the set.  
PC  
AUDIO OUT  
PC OUTPUT  
2. Connect the PC Audio Output to the AUDIO IN  
(RGB/DVI) jack on the TV using a male-to-male  
3.5mm mini jack.  
3. Turn on both the PC and TV.  
4. Select the VGA input source on your TV by press-  
ing either the INPUT buttons on the remote con-  
trol.  
COMPONENT IN  
RGB IN  
(PC)  
AUDIO IN  
(RGB/DVI)  
L
R
AV1  
L
AUDIO  
Y
Pb  
Pr  
VIDEO  
R
VIDEO  
AUDIO  
Rear panel of the set  
A
When connecting with a D-Sub 15 pin cable - 22 inch  
1. Connect the RGB output of the PC to the RGB IN  
PC  
(PC) jack on the set.  
AUDIO OUT  
PC OUTPUT  
2. Connect the PC Audio Output to the AUDIO IN  
(RGB/DVI) jack on the TV using a male-to-male  
3.5mm mini jack.  
3. Turn on both the PC and TV.  
4. Select the VGA input source on your TV by press-  
ing either the INPUT buttons on the remote con-  
trol.  
COMPONENT IN  
SERVICE  
RGB IN  
(PC)  
AUDIO IN  
(RGB/DVI)  
L
R
AV1  
L
AUDIO  
VIDEO  
AUDIO  
R
Y
Pb  
Pr  
VIDEO  
Rear panel of the set  
Chapter 1  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
PC Connection  
A
When connecting with a HDMI to DVI cable - 26/32/42 inches  
1. Connect the DVI Output on the PC to the  
HDMI / DVI IN Input jack on the TV.  
PC  
DVI OUTPUT  
AUDIO OUT  
2. Connect the PC Audio Output to the AUDIO IN  
(RGB/DVI) jack on the TV using a male-to-male  
3.5mm mini jack.  
3. Turn on both the PC and TV.  
4. Select the HDMI input source on your TV by press-  
ing either the INPUT buttons on the remote con-  
trol.  
COMPONENT IN  
HDMI/DVI  
IN  
RGB IN  
(PC)  
AUDIO IN  
(RGB/DVI)  
L
R
AV1  
AUDIO  
Y
Pb  
VIDEO  
Pr  
VIDEO  
L
R
AUDIO  
Rear panel of the set  
A
When connecting with a HDMI to DVI cable - 22 inch  
1. Connect the DVI Output on the PC to the  
HDMI / DVI IN Input jack on the TV.  
PC  
DVI OUTPUT  
AUDIO OUT  
2. Connect the PC Audio Output to the AUDIO IN  
(RGB/DVI) jack on the TV using a male-to-male  
3.5mm mini jack.  
3. Turn on both the PC and TV.  
4. Select the HDMI input source on your TV by press-  
ing either the INPUT buttons on the remote con-  
trol.  
COMPONENT IN  
SERVICE  
HDMI/DVI  
IN  
RGB IN  
(PC)  
AUDIO IN  
(RGB/DVI)  
L
R
AV1  
L
AUDIO  
VIDEO  
AUDIO  
R
Y
Pb  
VIDEO  
Pr  
Rear panel of the set  
32  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections and Setup  
Resolution  
A
PC  
Horizontal  
Frequency (kHz)  
Vertical  
Frequency (Hz)  
Resolution  
640 x 480  
59.94  
56.25  
60.32  
60.00  
31.47  
35.16  
37.88  
48.36  
800 x 600  
1024 x 768  
A
HDMI  
Vertical  
Frequency (Hz)  
Resolution  
480/60P  
720/60P  
1080/60I  
1080/60P  
60.000  
60.000  
60.000  
60.000  
Note  
a. The synchronization input form is separate.  
b. If the resolution is not supported, ‘Not Support!’ message will be displayed.  
USB Port  
1. Connect the USB device to the USB IN jack  
on the set.  
Side panel  
of the set  
Side panel  
of the set  
Side panel  
of the set  
2. Select the USB input source using the  
32  
inch  
42  
inch  
22/26  
inches  
USB IN  
USB IN  
INPUT button on the remote control.  
3. Follow the on screen display to access the  
USB functions.  
USB Memory  
USB Memory  
USB Memory  
Chapter 1  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Using the Remote Control  
Basic(User) Remote  
The basic remote control (R130K1) is used by the viewer for basic operating functions. It is designed so that  
the viewer cannot alter certain master remote-specified features. The Sleep, Closed Captioning, and Channel  
Guide features can be accessed directly with remote buttons.  
1. NUMBER BUTTONS  
Selects channel numbers.  
2. ON-OFF  
ON-OFF  
1
4
2
5
8
0
3
6
9
2
3
4
7
6
9
Switches the set on or off.  
3. SYSTEM  
1
SYSTEM  
SOUND  
Configures the remote for TV1/TV2.  
Configures the remote preamble (Bed 1/Bed 2) for use  
with multi TVs in 1 room.  
Press and hold <SYSTEM> and <1> key to set remote for  
“Bed1”(TV1).  
Press and hold <SYSTEM> and <2> key to set the remote  
for “Bed2”(TV2). Refer to “Key Management”,”RCU type”  
in Chapter 5.  
7
SKIP  
SLEEP GUIDE  
CC  
5
8
GO BACK  
VOL  
CH  
MUTE  
CH  
VOL  
10  
11  
4. SOUND  
Recalls your preferred sound setting.  
5. SKIP  
Unused  
6. SLEEP  
Sets the sleep timer.  
7. GUIDE  
Display “Channel List” menu.  
8. GO BACK  
Return to the previous menu.  
9. CC  
Select the Caption menu directly.  
12  
15  
16  
INPUT  
MENU  
ANTENNA  
OK  
INFO  
13  
14  
CLEAR  
17  
10. VOL + / VOL -  
Adjusts sound level.  
CH + / CH -  
Select a channel.  
C O M M E R C I A L  
R130K1  
MUTE  
Switches the sound on or off.  
11. INPUT  
Selects the TV, AV1, AV2, YPbPr, VGA, HDMI or USB  
mode.  
12. ANTENNA  
Unused  
13. MENU  
Displays “Basic” on screen menu.  
There are 2 remotes for this TV;  
R130K1 - user Remote. This remote displays a basic user  
menu when the menu key is pressed.  
R130K2 - installer Remote. This remote displays an  
installer menu when the menu key is pressed.  
14. Navigational Controls  
Adjusts menu settings.  
Selects menu item.  
15. OK  
Accepts your selection.  
16. INFO  
Display the current channel information.  
17. CLEAR  
Exit from any OSD.  
34  
Chapter 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Using the Remote Control  
Master(Installer) Remote  
The master remote control (R130K2) accesses all of the TV’s menus. It is used to customize the TV’s functional-  
ity for specific users or specific situations.  
1. NUMBER BUTTONS  
Selects channel numbers.  
2. ON-OFF  
Switches the set on or off.  
3. SYSTEM  
ON-OFF  
1
4
2
5
8
0
3
6
9
2
3
4
7
6
9
1
SYSTEM  
RESET  
Configures the remote for TV1/TV2.  
Configures the remote preamble (Bed 1/Bed 2) for use  
with multi TVs in 1 room.  
Press and hold <SYSTEM> and <1> key to set remote for  
“Bed1”.  
Press and hold <SYSTEM> and <2> key to set the remote  
for “Bed2”. Refer to “Key Management”,”RCU type” in  
Chapter 5.  
7
SKIP  
SLEEP GUIDE  
CC  
5
8
GO BACK  
VOL  
CH  
MUTE  
CH  
VOL  
10  
11  
4. RESET  
Unused.  
5. SKIP  
Unused  
6. SLEEP  
Sets the sleep timer.  
7. GUIDE  
Display “Channel List” menu.  
8. GO BACK  
Return to the previous menu.  
9. CC  
Select the Caption menu directly.  
12  
15  
16  
INPUT  
MENU  
ANTENNA  
OK  
INFO  
13  
14  
CLEAR  
17  
MASTER  
10. VOL + / VOL -  
Adjusts sound level.  
CH + / CH -  
Select a channel.  
R130K2  
MUTE  
Switches the sound on or off.  
11. INPUT  
Selects the TV, AV1, AV2, YPbPr, VGA, HDMI or USB  
mode.  
12. ANTENNA  
Put Batteries in the Remote  
Remove the battery compartment cover  
from the back of the remote by pushing  
the tab and lifting off the cover.  
Unused  
13. MENU  
Displays “Installer” on screen menu.  
There are 2 remotes for this TV;  
R130K1 - user Remote. This remote displays a basic user  
menu when the menu key is pressed.  
R130K2 - installer Remote. This remote displays an  
installer menu when the menu key is pressed.  
14. Navigational Controls  
Adjusts menu settings.  
Selects menu item.  
Insert two fresh batteries. Make sure the  
polarities (+ and -) are aligned correctly.  
Replace the cover.  
15. OK  
Accepts your selection.  
16. INFO  
Display the current channel information.  
17. CLEAR  
Exit from any OSD.  
Chapter 2  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3: Using USB Clone Tool  
USB Cloner Operation  
1
2
4
Teaching  
5
3
Learning  
1. USB Connector  
Connects to the USB port of the TV or PC.  
2. Service Port  
Connects to the service port of the television. See “Learning” section for details.  
3. Mode Switch  
Mode Selection Switch.  
4. Status LED  
Shows the status of the USB Clone.  
5. Learn Button  
Button to start the “learn” process. See “learning” section for details.  
Errors Table  
Flashing Red/Green LED indicates the following error conditions.  
Number of Green  
LED Flashes  
4
5
1
2
3
4
Error Detected in TV Channel list file.  
Error in transmission Data Packet  
No response from service port.  
6
10  
Couldn’t save TV settings to USB Cloner  
36  
Chapter 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3: Using USB Clone Tool  
Learning - 22inch  
Copying settings out of TV.  
Rear panel of the set  
1. Turn TV on.  
SERVICE  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
2. Connect USB Cloner to TV USB Port.  
AV1  
L
VIDEO  
AUDIO  
R
3. Set switch to “learning” position.  
Side panel  
of the set  
(Status LED will Light red without flashing.)  
USB IN  
2.5mm Stereo Cable  
(cross data cable)  
4. Connect 2.5mm Stereo Cable (cross data cable)  
between the TV service port and the USB Cloner ser-  
vice port.  
Teaching  
5. Press the Learn button for 1 second. As soon as the  
LED turns green, release the button.  
USB Cloner  
Learning  
6. The LED will turn Red and flash while the settings are  
being saved to the USB Key. Upon successful copy, the  
LED will light up yellow for 2 seconds and then return  
to a red, constantly lit state. Upon an unsuccessful  
copy, the LED will flash an error code as described in  
the “Error Table” section.  
Note :New TV Settings file, “ChList.bin” will appear on  
the USB Cloner .  
Learning - 26 inch  
Copying settings out of TV.  
Rear panel of the set  
1. Turn TV on.  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
DIGITAL AUDIO  
OUT(COAXIAL)  
SERVICE  
2. Connect USB Cloner to TV USB Port.  
3. Set switch to “learning” position.  
Side panel  
of the set  
USB IN  
(Status LED will Light red without flashing.)  
2.5mm Stereo Cable  
(cross data cable)  
4. Connect 2.5mm Stereo Cable (cross data cable)  
between the TV service port and the USB Cloner ser-  
vice port.  
Teaching  
Learning  
5. Press the Learn button for 1 second. As soon as the  
LED turns green, release the button.  
USB Cloner  
6. The LED will turn Red and flash while the settings are  
being saved to the USB Key. Upon successful copy, the  
LED will light up yellow for 2 seconds and then return  
to a red, constantly lit state. Upon an unsuccessful  
copy, the LED will flash an error code as described in  
the “Error Table” section.  
Note :New TV Settings file, “ChList.bin” will appear on  
the USB Cloner .  
Chapter 3  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3: Using USB Clone Tool  
Learning - 32inch  
Copying settings out of TV.  
Rear panel of the set  
1. Turn TV on.  
SERVICE  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
2. Connect USB Cloner to TV USB Port.  
AV1  
L
VIDEO  
AUDIO  
R
3. Set switch to “learning” position.  
Side panel  
of the set  
(Status LED will Light red without flashing.)  
USB IN  
2.5mm Stereo Cable  
(cross data cable)  
4. Connect 2.5mm Stereo Cable (cross data cable)  
between the TV service port and the USB Cloner ser-  
vice port.  
Teaching  
5. Press the Learn button for 1 second. As soon as the  
LED turns green, release the button.  
USB Cloner  
Learning  
6. The LED will turn Red and flash while the settings are  
being saved to the USB Key. Upon successful copy, the  
LED will light up yellow for 2 seconds and then return  
to a red, constantly lit state. Upon an unsuccessful  
copy, the LED will flash an error code as described in  
the “Error Table” section.  
Note :New TV Settings file, “ChList.bin” will appear on  
the USB Cloner .  
Learning - 42inch  
Copying settings out of TV.  
1. Turn TV on.  
Rear panel of the set  
2. Connect USB Cloner to TV USB Port.  
AUDIO IN  
(RGB/DVI)  
ANTENNA/  
CABLE IN  
DIGITAL AUDIO  
OUT(COAXIAL)  
SERVICE  
3. Set switch to “learning” position.  
(Status LED will Light red without flashing.)  
2.5mm Stereo  
Cable (cross  
data cable)  
4. Connect 2.5mm Stereo Cable (cross data cable)  
between the TV service port and the USB Cloner ser-  
vice port.  
Teaching  
Learning  
5. Press the Learn button for 1 second. As soon as the  
LED turns green, release the button.  
USB Cloner  
Side panel  
of the set  
6. The LED will turn Red and flash while the settings are  
being saved to the USB Key. Upon successful copy, the  
LED will light up yellow for 2 seconds and then return  
to a red, constantly lit state. Upon an unsuccessful  
copy, the LED will flash an error code as described in  
the “Error Table” section.  
Note :New TV Settings file, “ChList.bin” will appear on  
the USB Cloner .  
38  
Chapter 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3: Using USB Clone Tool  
Teaching - 22/26 inches  
Placing settings into TV.  
1. Connect USB Cloner to TV USB Port.  
Side panel  
of the set  
2. Set mode switch to “teach”.  
(Status LED will flash red)  
USB IN  
3. Turn off TV Power.  
4. Turn on TV Power.  
Teaching  
Learning  
TV settings will be copied into television.  
USB Cloner  
Note :TV Settings file “ChList.bin” should be present  
on USB clone device for teaching function to  
work properly. Refer to “Learning” section for  
details.  
Teaching - 32 inch  
Placing settings into TV.  
1. Connect USB Cloner to TV USB Port.  
2. Set mode switch to “teach”.  
Side panel  
of the set  
USB IN  
(Status LED will flash red)  
3. Turn off TV Power.  
4. Turn on TV Power.  
Teaching  
Learning  
TV settings will be copied into television.  
USB Cloner  
Note :TV Settings file “ChList.bin” should be present  
on USB clone device for teaching function to  
work properly. Refer to “Learning” section for  
details.  
Teaching - 42 inch  
Placing settings into TV.  
1. Connect USB Cloner to TV USB Port.  
Side panel  
of the set  
2. Set mode switch to “teach”.  
(Status LED will flash red)  
3. Turn off TV Power.  
USB Cloner  
4. Turn on TV Power.  
TV settings will be copied into television.  
Teaching  
Learning  
Note :TV Settings file “ChList.bin” should be present  
on USB clone device for teaching function to  
work properly. Refer to “Learning” section for  
details.  
Chapter 3  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4: Basic Operation  
Plug in the TV  
Plug the end of the power cord into the back of the TV. Plug the other end into a grounded wall outlet.  
Insert the plug completely into the outlet. Do not plug into an outlet controlled by a light switch.  
Turn on the TV  
Turn on your TV by pressing the Power button on the front of the TV or ON-OFF on the remote control.  
Channel Scan  
This function automatically finds all channels available through the Antenna or Cable and stores them in  
memory on the channel list.  
Channel Scans can only be performed using a Master remote.  
Channel Selection  
You can select a channel number with the CH + / CH - button or NUMBER buttons.  
Volume Adjustment  
Press the VOL+ / VOL- button to adjust the sound level.  
Sound Mute  
Press the MUTE button. The sound is switched off and the mute Icon appears.  
To cancel mute mode, press the MUTE or VOL+ / VOL- button again.  
40  
Chapter 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4: Basic Operation  
Source Selection  
Input Source  
1. Press the INPUT button to change the input  
mode.  
TV  
AV1  
AV2  
2. Press the Down or Up button to select your  
YPbPr  
VGA  
HDMI  
USB  
desired mode.  
3. Press the OK button to change your selected  
mode.  
Language Selection  
Setup  
1. Press the MENU button and then press the Down or  
Up button to select the Setup.  
OSD Language  
English  
Normal  
F G  
F G  
G
Screen Mode  
Time Setup  
Caption  
2. Press the OK button and then press the Down or Up  
button to select OSD Language.  
G
Reset Default  
G
3. Press the Left or Right button to select your desired  
language.  
Select MENU Exit  
(Select between English, Español, Français)  
4. The on screen menu will then appear in the selected  
language.  
Chapter 4  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5: Commercial Interface Menus  
These TVs include a full commercial interface that allows your facility to customize the perfor-  
mence to your specific needs. These settings are only accessible to the installer with the use of  
the Master Remote(R130K2). Contact your RCA Commercial Distribution to obtain a master  
remote.  
You can access this menu by pressing MENU -> 9 -> 6 -> 3 -> 2 using the Master Remote.  
Commercial Interface  
Commercial Interface  
Channel  
On  
F G  
G
OSD  
G
Source  
G
Volume  
G
Power Management  
RCU and Local Key  
Reset Commercial Interface  
G
G
G
ENTER Enter  
Select MENU Exit  
- You must set “Commercial Interface” to “On” to activate the below items.  
Channel  
Commercial Interface  
Commercial Interface  
Commercial Interface  
Channel  
OSD  
Source  
On  
F G  
G
Direct Tuning Access  
ATSC Tune Mode  
Power On Source  
Power On Major Channel  
Power On Miner Channel  
Channel Hold  
On  
Virtual  
Off  
F G  
F G  
F G  
2
G
G
Volume  
G
0
Power Management  
RCU and Local Key  
Reset Commercial Interface  
G
Off  
F G  
G
G
ENTER Enter  
Select MENU Exit  
Select MENU Back  
- Direct Tuning Access : If this function is on, you can tune to channels even if the channels are not in the  
channel list using the numeric keys. If this function is off, only channels in the channel list can be tuned.  
- ATSC Tune Mode : This function sets the channel frequency type for Digital Channels to physical or virtual.  
If the facility has a head end signal distribution system, set this to “physical”.  
- Power On Source : Use this setting to configure the signal source of the TV when it is turned on.  
- Power On Major/Minor Channel : Use this setting to configure the initial channel of the TV when it is  
turned on.  
Note: “Power On Source” should be set to “TV” to use this setting.  
To tune to an analog channel, set minor channel to 0.  
- Channel Hold : If this function is on then you cannot change channels.  
OSD  
Commercial Interface  
Commercial Interface  
Commercial Interface  
Channel  
OSD  
On  
F G  
G
Channel Banner  
OSD Timer  
Clear V-Chip  
On  
60S  
On  
F G  
F G  
F G  
G
Source  
G
Volume  
G
Power Management  
RCU and Local Key  
Reset Commercial Interface  
G
G
G
ENTER Enter  
Select MENU Exit  
Select MENU Back  
- Channel Banner : If this function is off then channel banner will not appear when channel is changed.  
- OSD Timer : Use this setting to configure the menu OSD time out.  
- Clear V-Chip : This function can be used to Clear V-Chip password and settings.  
42  
Chapter 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5: Commercial Interface Menus  
Source  
Commercial Interface  
Commercial Interface  
Input Block  
AUX Inputs  
G
G
1
2
3
4
5
6
7
TV  
AV  
S-Video  
YPBPR  
VGA  
HDMI  
USB  
ENTER Set  
Select MENU Back  
Select MENU Back  
- Input Block : Use this setting to configure which inputs are available to the user through the input button.  
Commercial Interface  
Commercial Interface  
Input Block  
AUX Inputs  
G
G
AV  
Off  
Off  
Off  
Off  
Off  
Off  
F G  
F G  
F G  
F G  
F G  
F G  
S-Video  
YPBPR  
VGA  
HDMI  
USB  
Select MENU Back  
Select MENU Exit  
- AUX Inputs : Use this setting to place inputs into the channel list. If you place an input in the channel list,  
the user can access the input using the CH buttons on the remote and Pillow Speaker.  
Volume  
Commercial Interface  
Commercial Interface  
Commercial Interface  
Channel  
On  
F G  
G
Initial Volume  
Min Volume  
30  
0
OSD  
Source  
Volume  
G
Max Volume  
Volume Hold  
Blank and Mute  
0
G
Off  
Off  
F G  
G
F G  
Power Management  
RCU and Local Key  
Reset Commercial Interface  
G
G
G
ENTER Enter  
Select MENU Exit  
ENTER Adjust  
Select MENU Back  
- Initial Volume : This setting configures the turn on volume of the TV.  
- Min Volume : This setting assigns the minimum volume level that the user can access.  
- Max Volume : This setting assigns the maximum volume level that the user can access.  
- Volume Hold : If this function is on then user cannot adjust volume level  
- Blank and Mute : If this function is on, sound will be muted when video is not present on the external  
video source.  
Chapter 5  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5: Commercial Interface Menus  
Power Management  
Commercial Interface  
Commercial Interface  
Commercial Interface  
Channel  
OSD  
On  
F G  
G
Auto Power On  
Auto Power Off  
Power Always On  
Off  
Off  
Off  
F G  
F G  
F G  
G
Source  
G
Volume  
G
Power Management  
RCU and Local Key  
Reset Commercial Interface  
G
G
G
ENTER Enter  
Select MENU Exit  
Select MENU Back  
- Auto Power On : This function sets the power state when AC power is applied to the TV.  
+ Off : TV will go to stanby mode  
+ On : TV will turn on  
+ Last : TV will resume the state it was in before AC power was removed.  
- Auto Power Off : This function assigns the amount of time an inactive TV will remain on. It can be used by  
your facility to save energy.  
- Power Always On : TV can not be turned off.  
Key Management  
Commercial Interface  
Commercial Interface  
Commercial Interface  
Channel  
On  
F G  
G
Key Lock  
IR(RCU) Type  
On  
TV1  
F G  
F G  
OSD  
G
Source  
G
Volume  
G
Power Management  
RCU and Local Key  
Reset Commercial Interface  
G
G
G
ENTER Enter  
Select MENU Exit  
Select MENU Back  
- Key Lock : This setting disables the keys on the front of the TV.  
- RCU Type : This function assigns RCU type as TV1, TV2. This is used when more than 1 TV is being installed  
in the same room.  
Note : The remote must be configured to send the matching RCU Type corresponding to this setting.  
This is done as follows : On the R130 K1 remote, press hold <SYSTEM> and <1> keys for 5 seconds to set it  
to “TV1”. Press and hold <SYSTEM> and <2> keys for 5 seconds to set it to “TV2”.  
Reset Commercial Reset  
Commercial Interface  
Commercial Interface  
Channel  
OSD  
On  
F G  
G
Reset Commecial Reset  
G
Source  
Volume  
G
OK  
Cancel  
G
Power Management  
RCU and Local Key  
Reset Commercial Interface  
G
G
G
ENTER Enter  
Select MENU Exit  
- This function will reset all data in the commercial interface menu to the factory defaults.  
44  
Chapter 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
On Screen Menus  
Your TV’s OSD(On Screen Display) may differ slightly from what is shown in this manual.  
1. Press the MENU button and then press the Down or Up button to select each menu.  
2. Press the OK button and then Down, Up, Left and Right buttons to navigate to the available menus.  
Video  
Audio  
Picture Mode  
Brightness  
Contrast  
Saturation  
HUE  
Sharpness  
Gamma  
Color Temperature  
Advanced Video  
Reset Picture Mode  
User  
F G  
45  
50  
50  
0
Balance  
Bass  
Treble  
Sound Surround  
Sound Mode  
Equalizer  
SPDIF Type  
MTS  
0
40  
40  
F G  
F G  
F G  
F G  
F G  
F G  
On  
Off  
Off  
PCM  
Stereo  
English  
0
F G  
Middle  
G
G
Audio Language  
G
ENTER Enter  
Select MENU Exit  
ENTER Enter  
Select MENU Exit  
Video MENU  
Audio MENU  
Parental  
TV  
Program Block  
Change Password  
Clean All  
G
G
G
Tuner Mode  
Channel Scan  
Channel Skip  
Cable  
F G  
G
G
ENTER Enter  
Select MENU Exit  
ENTER Enter  
Select MENU Exit  
Parental MENU  
TV MENU  
Setup  
OSD Language  
English  
Normal  
F G  
F G  
G
Screen Mode  
Time Setup  
Caption  
G
Reset Default  
G
ENTER Enter  
Select MENU Exit  
Setup MENU  
Chapter 6  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Note : Some of these menu items can only be accessed using the Master Remote(R130K2).  
Setting up the TV Channel  
This TV prevents the user from changing the channel list.  
Auto Scan  
This function automatically finds all channels available through the Antenna or Cable and stores them in  
memory as the channel list.  
1. Press the MENU button on the master remote to  
TV  
enter the on-screen menu and then press either the  
Down or Up button to select the TV sub-menu.  
Tuner Mode  
Channel Scan  
Channel Skip  
Cable  
F G  
G
G
2. Press the OK button to enter the sub-menu and  
then press either the Down or Up button to select  
Tuner Mode.  
Select MENU Exit  
3. Press the Left or Right button to select either  
Antenna or Cable.  
TV  
Tuner Mode  
Channel Scan  
Channel Skip  
Cable  
F G  
G
4. Press the Down or Up button to select Channel  
Scan.  
G
5. Press the OK button to start the auto search.  
The TV will begin memorizing all of the available  
channels.  
ENTER Scan  
Select MENU Back  
6. Press the MENU button at any time to exit the chan-  
TV  
nel scan process.  
Status:Scanning..  
Cable  
10%  
7. Once the channel scan is complete the channels  
found and recognized by the TV will be available for  
viewing.  
Analog Channels:1  
Digital Channels:0  
MENU Cancel  
46  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Add / Delete a Channel  
You can manually store or remove channels in whatever order you desire.  
1. Press the MENU button on the master remote to  
enter the on-screen menu and then press either the  
Down or Up button to select the TV sub-menu.  
TV  
Tuner Mode  
Channel Scan  
Channel Skip  
Cable  
F G  
G
G
2. Press the OK button to enter the sub-menu and  
then press either the Down or Up button to select  
Channel Skip.  
ENTER Enter  
Select MENU Exit  
3. Press the OK button and then press the Down or  
Up button to select channel you want to add or  
delete.  
If you want to skip the selected channel, press the  
OK button to uncheck your selection.  
Channel Skip  
1
2
3
4
5
6
7
8
9
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
4. All channels that have a check will be added to your  
viewing selection.  
ENTER Set  
Select MENU Back  
5. Press the MENU button to return to the previous  
menu.  
Chapter 6  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Picture Controls  
Adjusting The Picture Controls  
The various Picture Modes allow you to adjust the display to your viewing preference.  
1. Press the MENU button to enter the on-screen  
Video  
menu and then press either the Down or Up button  
to select the Video sub-menu.  
Picture Mode  
Brightness  
Contrast  
Saturation  
HUE  
Sharpness  
Gamma  
Color Temperature  
User  
F G  
45  
50  
50  
0
2. Press the OK button to enter the sub-menu and  
then press either the Down or Up button to select  
0
F G  
Middle  
G
Picture Mode.  
Advanced Video  
Reset Picture Mode  
G
G
Select MENU Exit  
3. Press the Left or Right button to select between  
Cinema, Sport, Vivid, Hi-Bright or User Picture  
Modes.  
4. Press the MENU button to return to the previous  
menu.  
48  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Manual Picture Controls  
You can adjust picture Brightness, Contrast, Saturation, HUE and Sharpness to the levels you prefer.  
1. Press the MENU button to enter the on-screen  
Video  
menu and then press either the Down or Up button  
to select the Video sub-menu.  
Picture Mode  
Brightness  
Contrast  
Saturation  
HUE  
User  
F G  
45  
50  
50  
0
2. Press the OK button to enter the sub-menu and use  
the Left or Right button to change the picture  
mode to User. Then, press either the Down or Up  
button to scroll to the desired picture option.  
(Brightness, Contrast, Saturation, HUE,  
Sharpness)  
Sharpness  
Gamma  
Color Temperature  
Advanced Video  
Reset Picture Mode  
0
F G  
Middle  
G
G
G
ENTER Adjust  
Select MENU Exit  
Brightness  
60  
3. Press the OK button and then use the Left or Right  
button to adjust the selection to your preference.  
4. Press the MENU button to return to the previous  
menu.  
Brightness  
Increases or decreases amount of white in the your  
picture.  
Contrast  
Adjusts the difference between the light and dark  
levels in the picture.  
Saturation  
Adjusts intensity of all colors.  
HUE  
Adjusts the balance between red and green levels.  
Sharpness  
Adjusts the level of sharpness in the edges between  
the light and dark areas of the picture. The lower  
the level, the softer the image.  
Chapter 6  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Gamma  
This feature will allow you to adjust the brightness curve for the display.  
1. Press the MENU button to enter the on-screen  
Video  
menu and then press either the Down or Up button  
to select the Video sub-menu.  
Picture Mode  
Brightness  
Contrast  
Saturation  
HUE  
Sharpness  
Gamma  
Color Temperature  
User  
F G  
45  
50  
50  
0
2. Press the OK button to enter the sub-menu and  
then press either the Down or Up button to select  
0
F G  
Middle  
G
Gamma.  
Advanced Video  
Reset Picture Mode  
G
G
Select MENU Exit  
3. Press the Left or Right button to select between  
Dark, Middle or Bright.  
4. Press the MENU button to return to the previous  
menu.  
50  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Color Temperature  
The Color Temperature settings will allow you to adjust the lighting in the display to compliment your view-  
ing preference.  
The Cool setting will add more Blues and Greens into the image to give it a “cooler ” feeling.  
The Warm setting will add more Reds and Yellows into the image to give it a “warmer ” feeling.  
The Standard setting will be a more natural feeling and will fall between the Cool and Warm settings.  
1. Press the MENU button to enter the on-screen  
Video  
menu and then press either the Down or Up button  
to select the Video sub-menu.  
Picture Mode  
Brightness  
Contrast  
Saturation  
HUE  
Sharpness  
Gamma  
Color Temperature  
Advanced Video  
Reset Picture Mode  
User  
F G  
45  
50  
50  
0
2. Press the OK button to enter the sub-menu and  
then press either the Down or Up button to select  
and enter into the Color Temperature submenu.  
0
F G  
Middle  
G
G
G
Select MENU Exit  
3. Press the OK button and then press the Left or  
Right button to select between Cool, Standard,  
Warm or User settings.  
Color Temperature  
Color Temperature  
Standard  
F G  
0
R Gain  
G Gain  
B Gain  
4. If you selected the User setting, press the Down or  
Up button to select desired color option you wish to  
adjust.  
0
0
5. Press the OK button and then use the Left or Right  
Select MENU Back  
button to make appropriate adjustments.  
R Gain  
0
6. Press the MENU button to return to the previous  
menu.  
Note  
To adjust manually Color Temperature on your display, change the Color Temperature Mode to User.  
-
Chapter 6  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Reset Picture Mode  
When changing your settings, you can select the Reset Picture Mode option to restore the previous  
settings.  
1. Press the MENU button to enter the on-screen  
Video  
menu and then press either the Down or Up button  
to select the Video sub-menu.  
Picture Mode  
Brightness  
Contrast  
Saturation  
HUE  
Sharpness  
Gamma  
Color Temperature  
Advanced Video  
Reset Picture Mode  
User  
F G  
45  
50  
50  
0
2. Press the OK button to enter the sub-menu and use  
the Down or Up button to select Reset Picture  
Mode.  
0
F G  
Middle  
G
G
G
ENTER Enter  
Select MENU Exit  
3. Once the confirmation window appears, press OK to  
restore the previous settings.  
Are you sure?  
OK  
Cancel  
52  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Advanced Video  
Dynamic Noise Reduction  
Use this feature to reduce the amount of noise, or film grain, that may be present in the picture.  
1. Press the MENU button to enter the on-screen menu  
Video  
and then press either the Down or Up button to  
select the Video sub-menu.  
Picture Mode  
Brightness  
Contrast  
Saturation  
HUE  
Sharpness  
Gamma  
Color Temperature  
Advanced Video  
Reset Picture Mode  
User  
F G  
45  
50  
50  
0
2. Press the OK button to enter the sub-menu and then  
press either the Down or Up button to select  
Advanced Video.  
0
F G  
Middle  
G
G
G
ENTER Enter  
Select MENU Exit  
3. Press the OK button to enter the submenu and then  
press the Down or Up button to select DNR.  
Advanced Video  
DNR  
CTI  
Medium  
Medium  
On  
On  
On  
F G  
F G  
F G  
F G  
F G  
50  
4. Press the Left or Right button to select between  
Off, Low, Medium, Strong or Auto.  
Flesh Tone  
Adaptive Luma Control  
Blue Mute  
Back Light  
5. Press the MENU button to return to the previous  
menu.  
Select MENU Back  
Off  
Turns the screen noise reduction function off.  
Low  
Reduces screen noise at a low level.  
Medium  
Reduces screen noise at a medium level.  
Strong  
Reduces screen noise at a high level.  
Auto  
Automatically adjusts the noise reduction level  
according to received signal.  
Chapter 6  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
CTI (Color Transient Intensity)  
This feature is used to reduce the time the display takes to transition from one color to another.  
The effect of CTI will be seen as sharpening the border between colors.  
1. Press the MENU button to enter the on-screen  
Video  
menu and then press either the Down or Up button  
to select the Video sub-menu.  
Picture Mode  
Brightness  
Contrast  
Saturation  
HUE  
Sharpness  
Gamma  
Color Temperature  
Advanced Video  
Reset Picture Mode  
User  
F G  
45  
50  
50  
0
2. Press the OK button to enter the sub-menu and  
then press either the Down or Up button to select  
Advanced Video.  
0
F G  
Middle  
G
G
G
ENTER Enter  
Select MENU Exit  
3. Press the OK button and then press the Down or  
Up button to select CTI.  
Advanced Video  
DNR  
CTI  
Medium  
Medium  
On  
On  
On  
F G  
F G  
F G  
F G  
F G  
50  
4. Press the Left or Right button to select Off, Low,  
Medium or Strong.  
Flesh Tone  
Adaptive Luma Control  
Blue Mute  
Back Light  
5. Press the MENU button to return to the previous  
menu.  
Select MENU Back  
Flesh Tone  
In some cases, activation of this feature can result in a more pleasing display of sky and flesh colors.  
1. Press the MENU button to enter the on-screen  
Video  
menu and then press either the Down or Up button  
to select the Video sub-menu.  
Picture Mode  
Brightness  
Contrast  
Saturation  
HUE  
Sharpness  
Gamma  
Color Temperature  
Advanced Video  
Reset Picture Mode  
User  
F G  
45  
50  
50  
0
2. Press the OK button to enter the sub-menu and  
then press either the Down or Up button to select  
Advanced Video.  
0
F G  
Middle  
G
G
G
ENTER Enter  
Select MENU Exit  
3. Press the OK button and then press the Down or  
Up button to select Flesh Tone.  
Advanced Video  
DNR  
CTI  
Medium  
Medium  
On  
On  
On  
F G  
F G  
F G  
F G  
F G  
50  
4. Press the Left or Right button to select On or Off.  
Flesh Tone  
Adaptive Luma Control  
Blue Mute  
5. Press the MENU button to return to the previous  
menu.  
Back Light  
Select MENU Back  
54  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Adaptive Luma Control  
Large amounts of dark areas present in a picture will result in a lower Average Picture Level (APL) and  
the overall picture will look too dark; activation of this feature will raise the APL to counteract this effect.  
1. Press the MENU button to enter the on-screen  
Video  
menu and then press either the Down or Up button  
to select the Video sub-menu.  
Picture Mode  
Brightness  
Contrast  
Saturation  
HUE  
Sharpness  
Gamma  
Color Temperature  
Advanced Video  
Reset Picture Mode  
User  
F G  
45  
50  
50  
0
2. Press the OK button to enter the sub-menu and  
then press either the Down or Up button to select  
Advanced Video.  
0
F G  
Middle  
G
G
G
ENTER Enter  
Select MENU Exit  
3. Press the OK button and then press the Down or  
Up button to select Adaptive Luma Control.  
Advanced Video  
DNR  
CTI  
Medium  
Medium  
On  
On  
On  
F G  
F G  
F G  
F G  
F G  
50  
4. Press the Left or Right button to select On or Off.  
Flesh Tone  
Adaptive Luma Control  
Blue Mute  
5. Press the MENU button to return to the previous  
menu.  
Back Light  
Select MENU Back  
Blue Mute  
Screen can be set to blue color when video signal is not existed.  
1. Press the MENU button to enter the on-screen  
menu and then press either the Down or Up button  
to select the Video sub-menu.  
Video  
Picture Mode  
Brightness  
Contrast  
Saturation  
HUE  
Sharpness  
Gamma  
Color Temperature  
Advanced Video  
Reset Picture Mode  
User  
F G  
45  
50  
50  
0
2. Press the OK button to enter the sub-menu and  
then press either the Down or Up button to select  
Advanced Video.  
0
F G  
Middle  
G
G
G
ENTER Enter  
Select MENU Exit  
3. Press the OK button and then press the Down or  
Up button to select Blue Mute.  
Advanced Video  
DNR  
CTI  
Medium  
Medium  
On  
On  
On  
F G  
F G  
F G  
F G  
F G  
50  
4. Press the Left or Right button to select between On  
or Off.  
Flesh Tone  
Adaptive Luma Control  
Blue Mute  
Back Light  
5. Press the MENU button to return to the previous  
menu.  
Select MENU Back  
Chapter 6  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Back Light  
Adjusts the brightness level of the back light.  
Increasing the Back Light level will result in a brighter picture and is recommended for use brightly lit rooms,  
however, it will also decrease your black levels and results in a higher power consumption.  
1. Press the MENU button to enter the on-screen  
Video  
menu and then press either the Down or Up button  
to select the Video sub-menu.  
Picture Mode  
Brightness  
Contrast  
Saturation  
HUE  
Sharpness  
Gamma  
Color Temperature  
Advanced Video  
Reset Picture Mode  
User  
F G  
45  
50  
50  
0
2. Press the OK button to enter the sub-menu and  
then press either the Down or Up button to select  
Advanced Video.  
0
F G  
Middle  
G
G
G
ENTER Enter  
Select MENU Exit  
3. Press the OK button and then press the Down or  
Up button to select Back Light.  
Advanced Video  
DNR  
CTI  
Medium  
Medium  
On  
On  
On  
F G  
F G  
F G  
F G  
F G  
50  
4. Press the Left or Right button to adjust the selec-  
tion to your preference.  
Flesh Tone  
Adaptive Luma Control  
Blue Mute  
Back Light  
5. Press the MENU button to return to the previous  
menu.  
Select MENU Back  
R Gain  
0
56  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Screen Mode  
You can watch the screen in various picture formats.  
Screen size selection depends on the type of video input.  
1. Press the MENU button to enter the on-screen  
menu and then press either the Down or Up button  
in order to select the Setup sub-menu.  
Setup  
OSD Language  
Screen Mode  
Time Setup  
Caption  
English  
Normal  
F G  
F G  
G
G
2. Press the OK button and then press the Down or  
Up button to select Screen Mode.  
Reset Default  
G
3. Press the Left or Right button to select Normal,  
Select MENU Back  
Letterbox, Panorama or Auto.  
4. Press the MENU button to return to the previous  
menu.  
Normal  
This selection is used to fill the entire screen with  
the image so no black bars appear  
Letterbox  
Following selection will lead you to view a picture  
with an original 4:3 aspect ratio, with black bars  
appearing at both the left and right sides.  
Panorama  
When your set receives the wide screen signal, when  
selected it will adjust the picture horizontally, in non-  
linear proportion, to fill the entire screen.  
Auto  
When your set receives the wide screen signal, it will  
change automatically the picture format that has  
been sent.  
Chapter 6  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Sound Controls  
Adjusting The Sound Controls  
The Sound Mode preset selection will allow you to adjust the sound to your listening preference.  
1. Press the MENU button to enter the on-screen menu  
Audio  
and then press either the Down or Up button to  
select the Audio sub-menu.  
Balance  
Bass  
Treble  
0
40  
40  
Sound Surround  
Sound Mode  
Equalizer  
SPDIF Type  
MTS  
On  
Off  
Off  
PCM  
Stereo  
English  
F G  
F G  
F G  
F G  
F G  
F G  
2. Press the OK button to enter the sub-menu and then  
press either the Down or Up button to select Sound  
Mode.  
Audio Language  
Select MENU Exit  
3. Press the Left or Right button to select between  
Off, Concert, Living Room, Hall, Bathroom, Cave,  
Arena or Church Modes.  
4. Press the MENU button to return to the previous  
menu.  
58  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Manual Sound Controls  
This function allows you to manually adjust the individual audio settings to your preferred levels.  
1. Press the MENU button to enter the on-screen menu  
Audio  
and then press either the Down or Up button to  
select the Audio sub-menu.  
Balance  
Bass  
Treble  
0
40  
40  
Sound Surround  
Sound Mode  
Equalizer  
SPDIF Type  
MTS  
On  
Off  
Off  
PCM  
Stereo  
English  
F G  
F G  
F G  
F G  
F G  
F G  
2. Press the OK button to enter the sub-menu and then  
press either the Down or Up button to select the  
desired sound option.(Balance, Bass, Treble)  
Audio Language  
ENTER Adjust  
Select MENU Exit  
3. Press the OK button to select the sound option that  
you wish to change and then press either the Left or  
Right button to make appropriate adjustments.  
Balance  
0
4. Press the MENU button to return to the previous  
menu.  
Balance  
Adjusts the left to right sound balance between the  
built-in speakers.  
Bass  
This adjusts the presence of the lower frequency  
audio.  
Treble  
This adjusts the presence of the higher frequency  
audio.  
Chapter 6  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Sound Surround  
Surround sound adds an extra dimension to the depth of to the sound.  
1. Press the MENU button to enter the on-screen menu  
Audio  
and then press either the Down or Up button to  
select the Audio sub-menu.  
Balance  
Bass  
Treble  
0
40  
40  
Sound Surround  
Sound Mode  
Equalizer  
SPDIF Type  
MTS  
On  
Off  
Off  
PCM  
Stereo  
English  
F G  
F G  
F G  
F G  
F G  
F G  
2. Press the OK button to enter the sub-menu and then  
press either the Down or Up button to select Sound  
Surround.  
Audio Language  
Select MENU Exit  
3. Press the Left or Right button to select between On  
or Off.  
4. Press the MENU button to return to the previous  
menu.  
Equalizer  
User can enable equalizer mode.  
1. Press the MENU button to enter the on-screen menu  
and then press either the Down or Up button to  
select the Audio sub-menu.  
Audio  
Balance  
Bass  
Treble  
0
40  
40  
Sound Surround  
Sound Mode  
Equalizer  
SPDIF Type  
MTS  
On  
Off  
Off  
PCM  
Stereo  
English  
F G  
F G  
F G  
F G  
F G  
F G  
2. Press the OK button to enter the sub-menu and then  
press either the Down or Up button to select  
Equalizer.  
Audio Language  
Select MENU Exit  
3. Press the Left or Right button to select between  
Rock, Pop, Live, Dance, Techno, Classic, Soft or  
Off.  
4. Press the MENU button to return to the previous  
menu.  
60  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Digital Output  
This option activates the Digital Audio Output. This is recommended for use with other devices capable of  
receiving digital audio signals. (This mode is set to Off by default)  
1. Press the MENU button to enter the on-screen  
Audio  
menu and then press either the Down or Up button  
to select the Audio sub-menu.  
Balance  
Bass  
Treble  
0
40  
40  
Sound Surround  
Sound Mode  
Equalizer  
SPDIF Type  
MTS  
On  
Off  
Off  
PCM  
Stereo  
English  
F G  
F G  
F G  
F G  
F G  
F G  
2. Press the OK button to enter the sub-menu and  
then press either the Down or Up button to select  
SPDIF Type.  
Audio Language  
Select MENU Exit  
3. Press the Left or Right button to select between  
Off, Dolby Digital or PCM.  
4. Press the MENU button to return to the previous  
menu.  
Off  
Television will only output an Analog audio signal.  
(This mode is set to Off by default)  
Dolby Digital  
Television will output a digital audio signal.  
PCM (Pulse-code modulation)  
This mode creates a digital representation of an  
analog signal and is only used with an audio CD sig-  
nal.  
Manufactured under license from  
Dolby Laboratories.  
“ Dolby “and the double-D symbol  
are trademarks of Dolby  
Laboratories.  
Chapter 6  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Stereo/SAP Broadcast Setup  
This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that the station may trans-  
mit.  
The television will automatically switch to Mono sound if the broadcasted channel is transmitted in Mono.  
1. Press the MENU button to enter the on-screen menu  
Audio  
and then press either the Down or Up button to  
select the Audio sub-menu.  
Balance  
Bass  
Treble  
0
40  
40  
Sound Surround  
Sound Mode  
Equalizer  
SPDIF Type  
MTS  
On  
Off  
Off  
PCM  
Stereo  
English  
F G  
F G  
F G  
F G  
F G  
F G  
2. Press the OK button to enter the sub-menu and then  
press either the Down or Up button to select MTS.  
Audio Language  
3. Press the Left or Right button to select between  
Select MENU Exit  
Stereo, SAP or Mono.  
4. Press the MENU button to return to the previous  
menu.  
Audio Language  
Other languages may be available if a digital signal is provided by the broadcasting station.  
1. Press the MENU button to enter the on-screen menu  
Audio  
and then press either the Down or Up button to  
select the Audio sub-menu.  
Balance  
Bass  
Treble  
0
40  
40  
Sound Surround  
Sound Mode  
Equalizer  
SPDIF Type  
MTS  
On  
Off  
Off  
PCM  
Stereo  
English  
F G  
F G  
F G  
F G  
F G  
F G  
2. Press the OK button to enter the sub-menu and then  
press either the Down or Up button to select Audio  
Language.  
Audio Language  
Select MENU Exit  
3. Press the Left or Right button to select between  
English, Español or Français.  
4. Press the MENU button to return to the previous  
menu.  
62  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Time Setting  
Time Zone Settings  
This mode allows you to set the Time Zone for your local area.  
1. Press the MENU button to enter the on-screen  
menu and then press either the Down or Up button  
in order to select the Setup sub-menu.  
Setup  
OSD Language  
Screen Mode  
Time Setup  
Caption  
English  
Normal  
F G  
F G  
G
G
2. Press the OK button to enter the submenu and then  
press either the Down or Up button in order to  
select Time Setup.  
Reset Default  
G
ENTER Enter  
Select MENU Back  
3. Press the OK button and then press the Down or  
Up button to select Time Zone.  
Time Setup  
Time Zone  
Time  
Eastern Time  
F G  
G
4. Use the Left or Right button to select your viewing  
area’s time zone. (Select between: Eastern Time,  
Indiana, Central Time, Mountain Time, Arizona,  
Pacific Time, Alaska, Hawaii)  
Sleep Timer  
Off  
F G  
5. Press the MENU button to return to the previous  
Select MENU Back  
menu.  
Chapter 6  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Auto Time Settings  
The Auto Time Setting receives the current time from an available digital channel.  
The digital channel signal includes information for the current time provided by the broadcasting station.  
1. Press the MENU button to enter the on-screen  
Setup  
menu and then press either the Down or Up button  
in order to select the Setup sub-menu.  
OSD Language  
Screen Mode  
Time Setup  
Caption  
English  
Normal  
F G  
F G  
G
G
2. Press the OK button to enter the submenu and then  
press either the Down or Up button in order to  
select Time Setup.  
Reset Default  
G
ENTER Enter  
Select MENU Back  
3. Press the OK button and then press the Down or  
Up button to select Time.  
Time Setup  
Time Zone  
Time  
Eastern Time  
F G  
G
4. Press the OK button and then press the Down or  
Up button to select Auto Synchronization.  
Sleep Timer  
Off  
F G  
5. Press the Left or Right button to switch between  
On or Off.  
ENTER Enter  
Select MENU Back  
6. Press the MENU button to return to the previous  
menu.  
Time  
Auto Synchronization  
On  
F G  
Date  
Time  
2008/01/01  
00:00:00  
Timer  
Off  
F G  
00:00:00  
00:00:00  
Power On Timer  
Power Off Timer  
Select MENU Back  
Note  
-
-
If Auto Synchronization is On, the Date and Time menus cannot be adjusted.  
Set the time manually if the current time is incorrect using the Auto Synchronization function.  
64  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Manual Time Settings  
If the current time setting is wrong when using the Auto Synchronization function, this setting allows you to  
set the clock manually.  
1. Press the MENU button to enter the on-screen  
Setup  
menu and then press either the Down or Up button  
in order to select the Setup sub-menu.  
OSD Language  
Screen Mode  
Time Setup  
Caption  
English  
Normal  
F G  
F G  
G
G
2. Press the OK button to enter the submenu and then  
press either the Down or Up button in order to  
select Time Setup.  
Reset Default  
G
ENTER Enter  
Select MENU Back  
3. Press the OK button and then press the Down or  
Up button to select Time.  
Time Setup  
Time Zone  
Time  
Eastern Time  
Off  
F G  
G
4. Press the OK button and then press the Down or  
Up button to select Auto Synchronization.  
Sleep Timer  
F G  
5. Press the Left or Right button to turn Auto  
Synchronization Off.  
ENTER Enter  
Select MENU Back  
6. Press the Down or Up button to select Date or  
Time.  
Time  
Auto Synchronization  
Off  
F G  
7. Use the Left or Right button to select the variable  
that you want to change and use number buttons to  
enter the date or time.  
Date  
Time  
2008/01/01  
00:00:00  
Timer  
Off  
F G  
00:00:00  
00:00:00  
Power On Timer  
Power Off Timer  
8. Press the MENU button to return to the previous  
menu.  
Select MENU Back  
Chapter 6  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Auto On /Off Time Settings  
The timer function will only operate when the current time has been set.  
This function automatically turns the TV On and Off at the specific time you designate.  
1. Press the MENU button to enter the on-screen  
Setup  
menu and then press either the Down or Up button  
in order to select the Setup sub-menu.  
OSD Language  
English  
Normal  
F G  
F G  
G
Screen Mode  
Time Setup  
Caption  
G
2. Press the OK button to enter the submenu and then  
press either the Down or Up button in order to  
Reset Default  
G
select Time Setup.  
ENTER Enter  
Select MENU Back  
3. Press the OK button and then press the Down or  
Up button to select Time.  
Time Setup  
Time Zone  
Eastern Time  
F G  
G
4. Press the OK button and then press the Down or  
Time  
Up button to select Timer.  
Sleep Timer  
Off  
F G  
5. Press the Left or Right button to select On.  
If Timer is selected to Off, Power On Timer and  
Power Off Timer menu are cannot be adjusted.  
ENTER Enter  
Select MENU Back  
6. Press the Down or Up button to select Power On  
Time  
Timer or Power Off Timer.  
Auto Synchronization  
Off  
F G  
Date  
Time  
2008/01/01  
00:00:00  
7. Press the Left or Right button to move to the  
desired variable and use number buttons to set  
time.  
Timer  
Off  
F G  
00:00:00  
00:00:00  
Power On Timer  
Power Off Timer  
8. Press the MENU button to return to the previous  
menu.  
Select MENU Back  
66  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Sleep Timer  
The sleep timer automatically switches the set to standby after the preset time elapses.  
1. Press the MENU button to enter the on-screen  
Setup  
menu and then press either the Down or Up button  
in order to select the Setup sub-menu.  
OSD Language  
English  
Normal  
F G  
F G  
G
Screen Mode  
Time Setup  
Caption  
G
2. Press the OK button to enter the submenu and then  
press either the Down or Up button in order to  
Reset Default  
G
select Time Setup.  
ENTER Enter  
Select MENU Back  
3. Press the OK button and then press the Down or  
Up button to select Sleep Timer.  
Time Setup  
Time Zone  
Eastern Time  
F G  
G
4. Press the Left or Right button to select desired  
Time  
sleep time.  
Sleep Timer  
Off  
F G  
The timer begins to count down from the number  
of minutes selected and will switch the unit to  
standby when the time runs out.  
Select MENU Back  
5. Press the MENU button to return to the previous  
menu.  
Note  
-
If you want to select directly select the sleep timer without entering the menus, press the SLEEP button on  
the remote control.  
-
Every time you press the button, it will switch between Off, 10, 20, 30, 40, 50, 60, 90 and 120.  
Chapter 6  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Captions  
Closed Caption - Analog  
The Analog Caption function operates when watching a regular analog channel.  
1. Press the MENU button to enter the on-screen  
Setup  
menu and then press either the Down or Up button  
in order to select the Setup sub-menu.  
OSD Language  
English  
Normal  
F G  
F G  
G
Screen Mode  
Time Setup  
Caption  
G
2. Press the OK button to enter the submenu and then  
press either the Down or Up button in order to  
Reset Default  
G
select Caption.  
ENTER Enter  
Select MENU Back  
3. Press the OK button and then press the Down or  
Up button to select Analog Closed Caption.  
Caption  
Analog Closed Caption  
Digital Closed Caption  
Digital Caption Style  
Off  
Off  
F G  
F G  
G
4. Press the Left or Right button to select between  
Off, CC1, CC2, CC3, CC4, TEXT1, TEXT2, TEXT3 or  
TEXT4.  
5. Press the MENU button to return to the previous  
menu.  
Select MENU Back  
Caption  
The term for the words that scroll across the botto-  
mof the TV screen; usually the audio portion of the  
program provided for the hearing impaired.  
TEXT  
The term for the words that appear in a large black-  
frame and almost cover the entire screen; usually  
messages provided by the broadcaster.  
Note  
-
If you want to select directly the Closed Captions, press the CC button on the remote control.  
68  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Closed Caption - Digital  
The Digital Caption function only operates on digital channels.  
1. Press the MENU button to enter the on-screen  
menu and then press either the Down or Up button  
in order to select the Setup sub-menu.  
Setup  
OSD Language  
Screen Mode  
Time Setup  
Caption  
English  
Normal  
F G  
F G  
G
G
2. Press the OK button to enter the submenu and then  
press either the Down or Up button in order to  
select Caption.  
Reset Default  
G
ENTER Enter  
Select MENU Back  
3. Press the OK button and then press the Down or  
Up button to select Digital Closed Caption.  
Caption  
Analog Closed Caption  
Digital Closed Caption  
Digital Caption Style  
Off  
Off  
F G  
F G  
G
4. Press the Left or Right button to select between  
Off, Service1, Service2, Service3, Service4,  
Service5 or Service6.  
5. Press the MENU button to return to the previous  
menu.  
Select MENU Back  
Chapter 6  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Digital Closed Caption Options  
Customize the DTV captions that appear on your screen.  
1. Press the MENU button to enter the on-screen  
Setup  
menu and then press either the Down or Up button  
in order to select the Setup sub-menu.  
OSD Language  
English  
Normal  
F G  
F G  
G
Screen Mode  
Time Setup  
Caption  
G
2. Press the OK button to enter the submenu and then  
press either the Down or Up button in order to  
Reset Default  
G
select Caption.  
ENTER Enter  
Select MENU Back  
3. Press the OK button and then press the Down or  
Up button to select Digital Caption Style.  
Digital Caption Style  
Caption Style  
Custom  
Large  
F G  
F G  
F G  
F G  
F G  
F G  
F G  
4. Press the OK button and then press the Down or  
Up button to select Caption Style.  
Font Size  
Font Color  
White  
Font Opacity  
Solid  
Background Color  
Background Opacity  
Window Color  
Window Opacity  
Black  
Solid  
5. Press the Left or Right button to select Custom.  
Black  
Trasparent  
F G  
6. Press the Down or Up button to select desired cap-  
tion option you wish to change. (Select between:  
Font Size, Font Color, Font Opacity, Background  
Color, Background Opacity, Window Color,  
Window Opacity)  
Select MENU Back  
7. Press the Left or Right button to customize your  
selected preference.  
8. Press the MENU button to return to the previous  
menu.  
Font Size  
Background Color  
Set the size in which the captions will appear  
in.  
Select a background color for the captions.  
Background Opacity  
Font Color  
Set the color in which the captions will appear  
Select the transparency for the background.  
Window Color  
in.  
Select a color for the edges.  
Font Opacity  
Window Opacity  
Select the transparency for the captions.  
Select the transparency for the edges.  
Note  
-
If the Caption Style is selected to “As Broadcaster”, the Caption Options cannot be adjusted.  
70  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Reset  
Reset Default  
This function returns all of the menu selections back to their original factory preset values.  
This function removes all TV channels from memory. Channels must be scanned for again after resetting to  
the unit to factory defaults.  
1. Press the MENU button to enter the on-screen  
Setup  
menu and then press either the Down or Up button  
in order to select the Setup sub-menu.  
OSD Language  
Screen Mode  
Time Setup  
Caption  
English  
Normal  
F G  
F G  
G
G
2. Press the OK button to enter the submenu and then  
press either the Down or Up button in order to  
select Reset Default.  
Reset Default  
G
ENTER Enter  
Select MENU Back  
3. Press the OK button and then press the Left or  
Right button to highlight the OK button.  
Are you sure?  
OK  
Cancel  
4. Press the OK button on the remote control to reset  
all settings.  
5. Press the MENU button to return to the previous  
menu.  
Chapter 6  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Parental Control  
Entering your password  
Parental Control can be used to block specific channels, ratings and other viewing sources.  
The default password of 0-0-0-0 is required to gain access to this menu.  
1. Press the MENU button to enter the on-screen  
Parental  
menu and then press either the Down or Up button  
Password  
in order to select the Parental sub-menu.  
2. Press the OK button and then enter the default  
password as requested.  
3. The TV is set up with the initial password of  
MENU Back  
0-0-0-0 ”.  
Set Password  
This option will allow you to input a new password of your choice.  
1. After entering the parental sub-menu, press the  
Parental  
Down or Up button to select Change Password.  
Program Block  
Change Password  
Clean All  
G
G
G
2. Press the OK button and then select any 4 digits for  
your new password and enter them in the New  
Password section.  
3. As soon as the 4 digits are entered, re-enter the  
same 4 digits on the Confirm Password to finalize  
your selection.  
ENTER Enter  
Select MENU Back  
Change Password  
New Password  
4. Your new password has now been memorized.  
Confirm Password  
5. Press the MENU button to return to the previous  
menu.  
MENU Back  
Note  
-
Write down your new password and keep it somewhere safe for the case of forgetting it in the future.  
72  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Ratings - Enable / Disable  
Enables or disables a parental blocking scheme.  
1. After entering the Parental sub-menu, press the  
Parental  
Down or Up button to choose Program Block.  
Program Block  
Change Password  
Clean All  
G
G
G
2. Press the OK button and then press the Down or  
Up button to select Rating Enable.  
3. Press the Left or Right button to select On or Off.  
When you select On, the Program Block options are  
enabled.  
ENTER Enter  
Select MENU Back  
Program Block  
4. Press the MENU button to return to the previous  
menu or scroll down to edit a Program Block option.  
Rating Enable  
On  
F G  
G
U.S. TV Ratings  
U.S. Movie Ratings  
Canadian English Ratings  
Canadian French Ratings  
Open V-Chip  
G
G
G
G
Block Unrated  
Off  
F G  
Select MENU Back  
Chapter 6  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
TV Ratings for USA  
This rating system has been established to help you monitor and block the types of programs viewed on TV.  
Ratings with a lock next to them will be blocked from being viewed.  
1. After entering the Parental sub-menu, press the  
Parental  
Down or Up button to choose Program Block.  
Program Block  
Change Password  
Clean All  
G
G
G
2. Press the OK button and then press either the  
Down or Up button to select U.S.TV Ratings.  
3. Press the OK button to enter the sub-menu.  
ENTER Enter  
Select MENU Back  
4. Use the Down, Up, Left or Right buttons to high-  
light the selection you wish to block and press the  
OK button to block that selection.  
Program Block  
Rating Enable  
On  
F G  
G
(Note:See rating descriptions on the next page.)  
U.S. TV Ratings  
U.S. Movie Ratings  
Canadian English Ratings  
Canadian French Ratings  
Open V-Chip  
G
G
5. Press the MENU button to return to the previous  
menu.  
G
G
Block Unrated  
Off  
F G  
ENTER Enter  
Select MENU Back  
U.S TV Ratings  
A
D
L
S
V
FV  
TV-Y  
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-MA  
Allowed Rating  
ENTER Set  
Blocked Rating  
Select MENU Back  
74  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
TV (FCC) Age Categories  
TV-MA  
Mature audiences only.  
TV-G  
General audience.  
This program may contain mature themes, pro-  
fane language, graphic violence and explicit sexu-  
al content.  
This contains little or no violence, no strong lan-  
guage, and little or no sexual dialog or situations.  
TV-Y7  
TV-14  
Directed for older children.  
Parents strongly cautioned.  
Themes and elements in this program may include  
mild physical or comedic violence, or may frighten  
children under the age of seven.  
This program may contain sophisticated themes,  
sexual content, strong language and more intense  
violence.  
TV-Y  
TV-PG  
All children.  
Parental guidance suggested.  
The themes and elements in this program are  
specifically designed for a very young audience,  
including children from ages two – six.  
The program may contain infrequent coarse lan-  
guage, limited violence, some suggestive sexual  
dialog and situations.  
TV (FCC) Content Sub-Categories:  
D: Dialog...sexual innuendo.  
L: Offensive language.  
S: Sexual Situation  
V: Violence.  
FV: Fantasy or cartoon violence.  
Chapter 6  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Movie Ratings  
This rating system has been established to help you monitor and block the types of movies viewed.  
These ratings apply to movies broadcasted on TV and allows you to select which ratings you want blocked.  
1. After entering the Parental sub-menu, press the  
Parental  
Down or Up button to choose Program Block.  
Program Block  
Change Password  
Clean All  
G
G
G
2. Press the OK button and then press either the  
Down or Up button to select U.S. Movie Ratings.  
3. Press the OK button to enter the submenu.  
ENTER Enter  
Select MENU Back  
4. Press the Down or Up buttons to choose the rating  
you wish to block and press the OK button to block  
that selection. (See rating descriptions below)  
Program Block  
Rating Enable  
On  
F G  
G
U.S. TV Ratings  
U.S. Movie Ratings  
Canadian English Ratings  
Canadian French Ratings  
Open V-Chip  
G
5. Press the MENU button to return to the previous  
menu.  
G
G
G
Block Unrated  
Off  
F G  
ENTER Enter  
Select MENU Back  
U.S Movie Ratings  
The MPAA Rating System (Movies)  
G
G  
PG  
PG-13  
R
General Audience.  
PG  
NC-17  
X
Parental guidance suggested.  
PG-13  
Allowed Rating  
Blocked Rating  
Parents strongly cautioned.  
ENTER Set  
Select MENU Back  
R  
Restricted.  
NC-17  
No one 17 and under admitted.  
X  
Adults only.  
Note  
-
If you block PG-13, G and PG movies will be available, PG-13, R, NC-17 and X will be blocked.  
76  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
English TV Ratings for Canada  
This rating system has been established to help you monitor and block the types of programs viewed on TV.  
Ratings with a lock next to them will be blocked from being viewed.  
1. After entering the Parental sub-menu, press the  
Parental  
Down or Up button to choose Program Block.  
Program Block  
Change Password  
Clean All  
G
G
G
2. Press the OK button and then press the Down or  
Up button to select Canadian English Ratings.  
3. Press the OK button to enter the sub-menu.  
ENTER Enter  
Select MENU Back  
4. Press the Down or Up buttons to choose the  
selection you wish to block and press the OK button  
on the remote to block it. (See rating descriptions  
below)  
Program Block  
Rating Enable  
On  
F G  
G
U.S. TV Ratings  
U.S. Movie Ratings  
Canadian English Ratings  
Canadian French Ratings  
Open V-Chip  
G
G
5. Press the MENU button to return to the previous  
menu.  
G
G
Block Unrated  
Off  
F G  
ENTER Enter  
Select MENU Back  
Canadian English Ratings  
Canadian English Ratings  
C
C  
Children  
C8+  
C8+  
G
PG  
14+  
18+  
Children eight years and older  
G  
Allowed Rating  
ENTER Set  
Blocked Rating  
Select MENU Back  
General programming,suitable for all audiences  
PG  
Parental Guidance  
14+  
Viewers 14 years and older  
18+  
Adult programming  
Chapter 6  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
French TV Ratings for Canada  
This rating system has been established to help you monitor and block the types of programs viewed on TV.  
Ratings with a lock next to them will be blocked from being viewed.  
1. After entering the Parental sub-menu, press the  
Parental  
Down or Up button to choose Program Block.  
Program Block  
Change Password  
Clean All  
G
G
G
2. Press the OK button and then press the Down or  
Up button to select Canadian French Ratings.  
3. Press the OK button to enter the sub-menu.  
ENTER Enter  
Select MENU Back  
4. Press the Down or Up buttons to choose the  
selection you wish to block and press the OK button  
on the remote to block it. (See rating descriptions  
below)  
Program Block  
Rating Enable  
On  
F G  
G
U.S. TV Ratings  
U.S. Movie Ratings  
Canadian English Ratings  
Canadian French Ratings  
Open V-Chip  
G
G
5. Press the MENU button to return to the previous  
menu.  
G
G
Block Unrated  
Off  
F G  
ENTER Enter  
Select MENU Back  
Canadian French Ratings  
Canadian French Ratings  
G
G  
General  
8 ans+  
8 ans+  
13 ans+  
16 ans+  
18 ans+  
General-Not convenient for little children  
13 ans+  
Not convenient for children of 13 years and younger  
16 ans+  
Allowed Rating  
ENTER Set  
Blocked Rating  
Select MENU Back  
Not convenient for children of 16 years and younger  
18 ans+  
This programs is only for adult  
78  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Downloadable Rating  
Your TV’s OSD (On Screen Display) may differ slightly from what is shown in this manual.  
1. After entering the Parental sub-menu, press the  
Parental  
Down or Up button to choose Program Block.  
Program Block  
Change Password  
Clean All  
G
G
G
2. Press the OK button and then press the Down or  
Up button to select Open V-Chip.  
3. Press the OK button twice.  
ENTER Enter  
Select MENU Back  
4. Press the Down or Up buttons to choose the menu  
options for Open V-Chip.  
Program Block  
Rating Enable  
On  
F G  
G
5. Press the OK button to make your selection.  
U.S. TV Ratings  
U.S. Movie Ratings  
Canadian English Ratings  
Canadian French Ratings  
Open V-Chip  
G
G
6. Press the MENU button to return to the previous  
menu.  
G
G
Block Unrated  
Off  
F G  
ENTER Enter  
Select MENU Back  
Open V-Chip  
U.S.(50 States+Possessions)  
G
ENTER Enter  
Select MENU Back  
Note  
-
-
This function may become available in the future and will be available only for digital channel signal.  
This function operates only when TV has received Region5 Rating data.  
Chapter 6  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Block Unrated  
Block Unrated can be used to block unrated channels, ratings and other viewing sources.  
1. After entering the Parental sub-menu, press the  
Parental  
Down or Up button to choose Program Block.  
Program Block  
Change Password  
Clean All  
G
G
G
2. Press the OK button and then press the Down or  
Up button to select Block Unrated.  
3. Press the Left or Right button to select On or Off.  
ENTER Enter  
Select MENU Back  
4. Press the MENU button to return to the previous  
menu.  
Program Block  
Rating Enable  
On  
F G  
G
U.S. TV Ratings  
U.S. Movie Ratings  
Canadian English Ratings  
Canadian French Ratings  
Open V-Chip  
G
G
G
G
Block Unrated  
Off  
F G  
ENTER Enter  
Select MENU Back  
Clean All  
This function cleans and resets all current parental block settings.  
1. After entering the Parental sub-menu, press the  
Parental  
Down or Up button to choose Clean All.  
Program Block  
Change Password  
Clean All  
G
G
G
2. Press the OK button on the remote control to select  
Clean All and then press the Left or Right button  
to select OK button.  
3. Press the OK button to clean and reset the Program  
ENTER Enter  
Select MENU Back  
Block menu options.  
Are you sure?  
4. Press the MENU button to return to the previous  
OK  
Cancel  
menu.  
80  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Setting the PC Mode  
Automatic Screen Adjustment  
This function automatically adjusts the screen position, clock, phase and scale in pc mode.  
The displayed image will disappear for a few seconds while the auto configuration is in progress. If the result  
of the automatic adjustment is not correct, you can manually adjust the settings to fit your viewing prefer-  
ence.  
1. Press the MENU button to enter the on-screen  
Video  
menu and then press either the Down or Up button  
to select the Video sub-menu.  
Auto Adjust  
H.Position  
V.Position  
Phase  
F G  
60  
50  
0
2. Press the OK button to enter the sub-menu and  
then press either the Down or Up button to select  
VGA.  
Clock  
100  
Select MENU Back  
3. Press the OK button and then use the Down or Up  
button to select Auto Adjust.  
4. Press the OK button to start the auto adjustment.  
5. If the result of the automatic adjustment is not  
correct, you can manually adjust the settings to fit  
your viewing preference. (See the next page for  
manual adjustment settings.)  
Note  
Select the VGA mode by pressing either the INPUT button.  
-
Chapter 6  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Manual Screen Adjustment  
If the result of the automatic adjustment is not correct, you can manually adjust the settings to fit your view-  
ing preference.  
1. Press the MENU button to enter the on-screen  
VGA  
menu and then press either the Down or Up button  
to select the Video sub-menu.  
Auto Adjust  
H.Position  
V.Position  
Phase  
G
60  
50  
0
2. Press the OK button to enter the sub-menu and  
then press either the Down or Up button to select  
VGA.  
Clock  
100  
Adjust MENU Back  
3. Press the OK button and then press the Down or  
Up button to select video option you wish to  
change.  
H.Position  
60  
4. Press the OK button and then press the Left or  
Right button to make appropriate adjustments.  
5. Press the MENU button to return to the previous  
menu.  
Horizontal Position  
This function is to adjust horizontal position of  
screen.  
Vertical Position  
This function is to adjust vertical position of screen.  
Phase  
This function allows you to remove any horizontal  
noise and clear or sharpen the image of characters.  
Clock  
This function is to minimize any vertical bars or  
stripes visible on the screen background.  
And the horizontal screen size will also change.  
82  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
USB Functions  
Picture Function  
To view photos, insert a USB device containing image files.  
Select the USB mode by pressing the INPUT button.  
1. Press the Left or Right button to select  
Picture  
01/01  
Picture.  
2. Press the OK button twice to move to pic-  
ture list of USB device.  
3. Press the Left, Right, Up or Down button  
to select picture that want to view.  
4. Press the OK button to display selected pic-  
ture.  
The slideshow will start in the order from  
the selected picture.  
CMSTDF  
01/05  
0/0  
None  
Short  
008.jpg  
Chapter 6  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Music Function  
To listen music, insert a USB device containing music files.  
Select the USB mode by pressing the INPUT button.  
1. Press the Left or Right button to select  
Music  
01/01  
Music.  
2. Press the OK button twice to move to music  
list of USB device.  
3. Press the Left, Right, Up or Down button  
to select music that want to listen.  
4. Press the OK button to play selected music.  
The music will play in the order from the  
selected music.  
01. .mp3  
00:04:04  
01/05  
01. .mp3  
00:03/04:04 128kbps 44kHZ  
84  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Specifications  
Models  
J22C760  
Dimension  
529.5mm x 397.5mm x 84.0mm  
(Width x Height x Depth)  
20.85 x 15.65 x 3.31 inches  
Weight (kg / lbs)  
5.7 kg / 12.57 lbs  
J22C760-FA2 (200cd/m2)  
J22C760-FP2 (200cd/m2)  
J22C760-FA4 (250cd/m2)  
J22C760-FP4 (250cd/m2)  
Brightness  
Panel Resolution  
Power Rating  
Consumption  
Audio Output  
Contrast Ratio  
Accessories  
1680 (H) x 1050 (V)  
AC100-240V~ 50/60Hz  
60W  
2.5W + 2.5W  
1,000:1  
• Power Cord  
• Owner’s Manual  
• HDMI/DVI IN  
• RGB IN(PC)  
• Stand  
External Port  
• ANTENNA / CABLE IN  
• USB IN  
• COMPONENT IN  
• AV1  
• DIGITAL AUDIO OUT  
(COAXIAL)  
• AC IN  
• SERVICE  
• H/P  
• AV2  
• AUDIO IN (RGB / DVI)  
• The Specification shown above may be changed without notice.  
Chapter 6  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Models  
J26C700  
Dimension  
(Width x Height x Depth)  
686.0mm x 504.0mm x 103.5mm  
27.01 x 19.84 x 4.07 inches  
Weight (kg / lbs)  
Brightness  
9.1 kg / 20.06 lbs  
J26C700-HA4 (360cd/m2)  
J26C700-FA4 (320cd/m2)  
J26C700-FP4 (320cd/m2)  
1920 (H) x 1080 (V)  
J26C700-HP4 (360cd/m2)  
1366 (H) x 768 (V)  
Panel Resolution  
Power Rating  
Consumption  
Audio Output  
Contrast Ratio  
Accessories  
AC100-240V~ 50/60Hz  
100W  
3W + 3W  
1,000:1  
• Power Cord  
• Owner’s Manual  
• HDMI/DVI IN  
• RGB IN(PC)  
• Stand  
External Port  
• ANTENNA / CABLE IN  
• USB IN  
• COMPONENT IN  
• AV1  
• DIGITAL AUDIO OUT  
(COAXIAL)  
• AC IN  
• AV2  
• SERVICE  
• AUDIO IN (RGB / DVI)  
• The Specification shown above may be changed without notice.  
86  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Models  
J32C750  
Dimension  
814.0mm x 574.0mm x 106.5mm  
(Width x Height x Depth)  
32.05 x 22.60 x 4.19 inches  
11.9 kg / 26.23 lbs  
400 cd/m2  
Weight (kg / lbs)  
Brightness  
Panel Resolution  
Power Rating  
Consumption  
Audio Output  
Contrast Ratio  
Accessories  
1366 (H) x 768 (V)  
AC100-240V~ 50/60Hz  
135W  
3W + 3W  
1,100:1  
• Stand  
• Power Cord  
• Owner’s Manual  
• HDMI/DVI IN  
• RGB IN(PC)  
External Port  
• ANTENNA / CABLE IN  
• USB IN  
• COMPONENT IN  
• AV1  
• DIGITAL AUDIO OUT  
(COAXIAL)  
• AC IN  
• AV2  
• SERVICE  
• AUDIO IN (RGB / DVI)  
• The Specification shown above may be changed without notice.  
Chapter 6  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV's Features  
Models  
J42C750  
Dimension  
(Width x Height x Depth)  
1021.0mm x 641.0mm x 115.5mm  
40.20 x 25.24 x 4.55 inches  
Weight (kg / lbs)  
Brightness  
20.0 kg / 44.09 lbs  
400 cd/m2  
Panel Resolution  
Power Rating  
Consumption  
Audio Output  
Contrast Ratio  
Accessories  
1920 (H) x 1080 (V)  
AC100-240V~ 50/60Hz  
195W  
5W + 5W  
1,300:1  
• Stand  
• Power Cord  
• Owner’s Manual  
• HDMI/DVI IN  
• RGB IN(PC)  
External Port  
• ANTENNA / CABLE IN  
• USB IN  
• COMPONENT IN  
• AV1  
• DIGITAL AUDIO OUT  
(COAXIAL)  
• AC IN  
• AV2  
• SERVICE  
• AUDIO IN (RGB / DVI)  
• The Specification shown above may be changed without notice.  
88  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7: Other Information  
Troubleshooting  
Problem  
Check Point  
No picture on screen.  
• Check whether the set is turned on.  
• Power cord inserted into wall outlet?  
• Test if there is power coming from the wall outlet by plug-  
ging in another product into the wall outlet where the  
set’s power cord was plugged in.  
• Ensure remote is enabled in Commercial Interface menu.  
• Ensure TV1/TV2 settings of TV match the remote.  
The remote control doesn’t work.  
Picture appears slowly, after switch-  
ing on.  
• This is normal as the image is muted during the start up  
process of the set. Please contact your service center, if the  
picture has not appeared after five minutes.  
• Select color in the Picture menu and press the Left or  
No or Poor color  
Right button.  
Horizontal/Vertical bars or  
picture shaking  
• Check for local interference such as a nearby electrical  
appliance or power tool.  
• A change in ambient humidity or temperature may result  
in an unusual noise at the time of switching off or on of  
the set and does not indicate a fault with the set.  
Unusual sound from inside the  
set.  
Chapter 7  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7: Other Information  
Limited Warranty  
Your Display will be repaired or replaced in accordance with the terms of this warranty, if it proves to be  
defective in material or workmanship under normal use, during the warranty period (“Warranty Period”) list-  
ed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This  
warranty is good only to the original purchaser of the product and effective only when used in the United  
States, excluding U.S. Territories.  
WARRANTY PERIOD  
Labor and parts: 2 years from the Date of Purchase. Your unit will be repaired or replaced with a new, sub-  
stitute model or factory reconditioned unit. If repaired, parts used in the repair may be new or remanufac-  
tured.  
Replacement Units and Repair Parts are warranted for the remaining portion of the original unit’s warranty  
period.  
Effective date of warranty:  
Your warranty period begins on the date of sale to the original consumer/end user. KEEP THE DEALER’S  
DATED BILL OF SALE OR PROOF OF DELIVERY as evidence of the purchase date.  
You will be required to submit a legible copy of your bill of sale or proof of delivery when requesting war-  
ranty service.  
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITA-  
TION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT  
ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY  
PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE FOR ANY INCI-  
DENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITH-  
OUT LIMITATION, LOST PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE  
WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE.  
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on  
how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty  
gives you specific legal rights and you may also have other rights that vary from state to state.  
Concerning Pixel Functionality:  
Your display contains about one million individual pixels.  
Your display typically contain a small number of pixels that do not function normally. Your display has been  
inspected and is in compliance with manufacturer’s specifications, indicating that any pixel defects do not  
effect the operation or use of your display.  
90  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7: Other Information  
THIS LIMITED WARRANTY DOES NOT APPLY TO:  
Damage caused in shipping or transit  
Service required as a result of improper installation, including incorrect or insufficient AC supply (please  
consult the owner’s manual for power supply requirements).  
Installation or repair of antenna systems, cable converters, cable company supplied equipment, or other  
components in a video system  
Set-up or adjustment on consumer controls, or damage caused by improper adjustments  
Damage caused by other system components  
Any panel that has been modified or incorporated into any other product  
Replacement of batteries on the remote control.  
Damage (including cosmetic damage), failure, loss or personal injury due to misuse, abuse, negligence,  
improper maintenance or storage, or to acts of nature or other causes beyond our control. (Causes beyond  
our control include but are not limited to lightning strike, power surges, power outages and water dam-  
age.)  
Image burn-in  
Repair or replacement of warranted parts by anyone other than an authorized service centers.  
Units purchased or serviced outside of the coverage area.  
Product where the original factory serial numbers have been removed, defaced or changed in any way.  
Product sold and labeled as “as is, where is” or similar disclaimer.  
How you get service:  
Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is  
within the warranty period must be presented to obtain warranty service. For rental firms, proof of first  
rental is also required.  
To contact the RCA Commercial warranty center by E-mail : [email protected]  
Product Registration:  
Please complete and mail the Product Registration Card packed with your TV or register online at  
The return of the card is not required for warranty coverage.  
Care and Cleaning  
CAUTION: Turn OFF your TV before cleaning.  
You can clean the TV as required, using a dry cloth. Be sure to occasionally dust the ventilation slots in the  
cabinet to help assure adequate ventilation.  
IMPORTANT: Do not allow liquid to come in contact with the TV, or allow liquid to run down the  
screen and inside the TV. Also, never place drinks or vases with water on top of the TV. This could  
increase the risk of fire or shock hazard or damage to the TV. Never use cleaning agents, they will  
damage the TV.  
Chapter 7  
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMO  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will  
only add delays in service for your product.  
DTI  
DTI Services, LLC  
1416 Miller Ave.  
Shelbyville, In 46176  
P/NO : 3350GDKM0121A  
GPN09MA058L  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radica Games Games 74007 User Guide
RCA MP3 Player M4304 User Guide
Remington Electric Shaver BHT 600 User Guide
Renesas Network Card M30880T EPB User Guide
Rinnai Electric Heater REH 10 User Guide
Ryobi Saw bts20r User Guide
Samsung Clothes Dryer DV433GTGJWR User Guide
Samsung Microphone S3C2410A User Guide
Samsung Microwave Oven SMK9175 User Guide
SBC comm Computer Hardware SBC 350A User Guide