DECT 6.0
Multi-Handset
Cordless
Telephone
User's Guide
Please read this manual before operating
product for the first time.
Model 2101/2101-2/2101-3/2101-4
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Rights of the
your equipment cause trouble on your line which may harm the
telephone network the telephone company shall, where practicable, notify
you that temporary discontinuance of service may be r qu Where
Telephone Company
S
hould
,
e
ired.
prior notice is not practicable and the circumstances warrant such action,
the telephone company may temporarily discontinue service immediately.
In case of such temporary
promptly notify you of such temporary
the opportunity to correct the situation; and
bring a complaint to the Commission pursuant to procedures set forth in
ubpar of Part 68, FCC Rules and egulations.
The telephone company may make changes in its communic
cili qu , operations or procedures where such action is
required in the operation of its business and not inconsistent with FCC
es and gu . If these changes are expected to affect the use or
performance of your telephone qu , the telephone company must
ng to allow you to maintain uninterrupted
d
i
sco
n
t
inuan
c
e
,
the telephone company m
co nuan afford you
inform you of your right to
ust:
(
1
)
d
(
i
3)
s
n
t
i
c
e
;
(2)
S
t
E
R
a
tions
f
a
t
i
e
s
,
e
ipment
R
u
l
R
e
lations
e
ipment
give you adequate
service.
n
o
t
ic
e
,
in wr
i
t
i
,
Interference Information
This device complies with Part 15 of the FCC
to the following two cond io This device may not cause harmful
and This device must accept any interference iv
including interference that may cause undesired operation.
R
u
l
e
s
.
Operation is subject
i
t
n
s
:
(1)
i
n
t
e
r
f
e
r
e
n
c
e
;
(
2
)
re
c
e
ed,
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a
residential installation.
This equipment
and if not installed and used in accordance with the
cause harmful interference to radio communic io
no guarantee that interference will not occur in a particular
Privacy of Communications may not beensured when using this product
g
e
n
e
ra
t
e
s,
u
se
s,
and can radiate radio frequency energy
io may
there is
,
i
n
s
t
r
u
c
t
ns,
a
t
n
s
.
However,
i
n
s
t
a
ll
a
t
io
.
n.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
•
Reorient or relocate the receiving antenna (that is, the antenna for radio
or television that is “receiving” the interference).
3
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
R
e
o
r
i
e
n
t
or relocate and increase the separation between the
telecommunications equipment and receiving antenna.
Connect the telecommunications equipment into an outlet on a circuit
different from that to which the receiving antenna is connected.
If these measures do not eliminate the
i
n
t
e
r
f
e
r
e
n
c
e
,
please consult
your dealer or an experienced
r
adio
/
t
e
l
e
vi
s
io
n
technician for additional
s
ugg
e
s
t
io
n
s
.
A
l
s
o
,
t
h
b
e
oo
F
k
e
d
t
e
,
r
a
l
C
o
mmunic
a
t
io
n
s
C
o
mm
i
ssio
n
ha
s
V
prepared a helpful
l
e
“How To Identify and Resolve
R
adio
/
T
Interference Problems.” This booklet is available from the U.S. Government
ng ffic ng D.C. 20402 specify stock number
004-000-00345-4 when ordering copies.
P
r
i
n
t
i
O
e
,
W
a
s
h
i
t
o
n
,
.Please
Notice: The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment
.
HearingAidCompatibility(HAC
)
This telephone system meets FCC standards for Hearing Aid Compatibility.
FCC RF Radiation Exposure tatement
This equipment complies with FCC RF radiation exposure limits set forth
for an uncontrolled vi This equipment should be installed and
operated with a minimum distance of 20 centimeters between the radiator
and your This transmitter must not be co-located or operated in
conjunction with any other antenna or transmitter
For body worn io this phone has been tested and meets the FCC
RF exposure guidelines w h e n used with the belt clip supplied with
this product Use of other accessories may not ensure compliance with FCC
S
en
ronment.
b
ody.
.
o
p
e
ra
t
n,
.
RF exposure guidelines.
Information for DECT Product
This telephone is compliant with the DECT
6
.
0
standard
which operates in the 1.92GHz to 1.93GHz frequency range
of to fi
coordination with relocation of this
.
I
n
st
a
ll
a
t
i
o
n
t
h
i
s equ
i
p
m
e
n
t
i
s sub
j
ec
t
n
o
t
i
c
a
t
i
o
n
and
U
TA
M
.
Any
equipment must be coordinated through and approved by
UTAM. UTAM may be contacted at 1-800-42 9-8826.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IndustryCanada(I.C.)Notice
T
L
h
e
i
s
product meets the
a
ppli
c
a
b
l
e
I
ndust
r
c
y
i
Canada technical
s
p
e
a
c
ppli
i
fi
c
a
t
i
o
n
s
.
présent te est conforme aux
m
a
ri
e
l
s
p
e
fic
at
i
o
n
s techn ques
i
cables
d'Industrie Canada.”
The Ringer Equivalence Number is an indication of the maximum number
of terminals allowed to be connected to a telephone
termination on an interface may consist of any combination of
i
n
t
e
r
f
a
c
e
.
The
d
e
vic
e
s
subject only to the requirement that the sum of the Ringer
E
quiva
l
e
n
c
e
Numbers of all the devices does not exceed five.
L'indice d'équivalence de la sonnerie (IES) sert à indiquer le nombre
maximal de terminaux qui peuvent être raccordés à une interface
t
é
l
é
ph
combinaison quelconque de dispositifs, à la seule condition que la somme
d'indices d'équivalence de la sonnerie de tous les dispositifs n'excède pas ''
This Class B digital apparatus complies with Canadian ICES-00
appareil numérique de la classe B est conforme à la norme NMB-003
o
n
i
qu
e
.
La terminaison d'une interface peut consister en une
5
.
3
.
C
et
du Canada.
IMPORTANT SAFE
T
Y
INSTRUCTIONS
When using your telephone
be to reduce the r
persons, including the following:
e
qu
i
p
m
e
k
n
t
, basic safety precautions should
a
l
wa
y
s
f
o
ll
o
we
d
i
s
of fire, shock, and injury
el
e
c
t
ri
c
to
•
Do not use this product near water. For
ba ub hb kitchen sink, laundry ub in a wet basement, or
near a swimming pool.
Avoid using telephone (other than a cordless type) during an electrical
e
x
a
m
p
l
e
,
near a
t
h
t
,
w
a
s
o
w
l
,
t
,
•
a
storm. There may bea remote risk of electric shock from lightning.
Do not use the telephone to report a gas leak in the vicinity of the leak
Use only the power cord and batteries indicated in this manual. Do not
dispose of batteries in a fire. They may explode. Check with local codes
for possible special disposal instructions.
•
•
.
SAVE THESE INSTRUCTIONS
5
Download from Www.Somanuals.com. All Manuals Search And Download.
I
M
PO
RTA
N
T
:
Because cordless phones operate on
electricity,
you should have at least one phone in your home that isn’t
cordless, in case the power in your home goes out.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
T
able of Contents
Turn off the ringer for all
incoming ll ...............................................20
Adjust theearpiece volume.......................20
Mute themicrophone.................................20
Equipment Approval
Information......................................
Interference Information...............
Hearing Aid Compatibility
c
a
s
2
3
Intercom Operation........................21
(
HAC)..................................................4
Make
a
call to another
handset.............21
Industry Canada (I.C.) Notice....................5
While you are on the phone......................21
Toggle between ll ..................................21
Transfer ll..............................................21
Make conference call..............................2
During the conference ll........................22
Text and nu .......................................22
Enter text and nu ...............................22
Phonebook...................................................2
View the phon book...................................23
Important safety instructions..................5
Before You
Telephone Jack
Installation.......................................
Digital Security System.............................9
Overview of thebase station......10
Overview of thephone.................1
Display Icons.................................12
Installing thePhone..................................1
Base tation...............................................1
Set thedate and time format.................1
Set thedate and time...............................1
What is standby mode?...........................14
Check the signal strength........................1
Self-defined settings.................................15
Set the display language..........................15
Personalize the sounds.............................15
Set the handset’s volume ........................16
c
a
s
a
ca
B
e
gi
n.............................
8
9
9
a
1
R
equirements.....
c
a
m
bers
m
ber
3
1
e
Search a record...........................................2
Scroll the contact list.................................2
3
3
2
3
4
4
E
n
t
e
r
the first character of a contact .....23
Call from the phon book...........................23
Access thephonebook during a call.......23
S
e
Add
Edit
a
a
record.................................................24
record.................................................24
5
Delete a r
e
c
o
r
d.............................................24
Delete all r
e
c
ords.........................................24
Call log...........................................................2
Reviewing CID ecords...............................2
Storing CID Records in phon
Dialing CID ..................................25
Deleting CID ecord..................................2
Deleting All CID ..............................26
Redial list.......................................................2
Redial ll....................................................27
redial record to the phonebook..27
5
R
5
e
book...........25
Set the key tone.........................................16
Advanced settings......................................1
a
Number
6
6
7
7
a
R
6
R
egistration..................................................1
R
ecords
Unregister the handsets............................1
Restore default settings............................1
Area de.....................................................17
Select therecall duration.........................1
Dial mode.....................................................1
First ring.......................................................1
6
a
ca
C
o
Save
a
7
8
8
Delete
a
redial record..................................2
7
7
Delete all redial records..............................2
Keypad lock.................................................27
Telephone Operation....................1
8
Unlock the keypad......................................28
Locate the handset ....................................28
Make
Quick call......................................................1
Dial before you call....................................19
Redial the most recent nu ................19
a
call...................................................18
9
Default settings...........................................2
Frequently asked questions......................2
8
8
m
ber
Warranty Assistance......................30
Limited Warranty...........................31
Call from theredial list..............................1
Call from the phonebook list....................1
9
9
Call from the call log..................................1
End call......................................................20
Answer call...............................................20
9
a
a
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Befor
e
You Begin
Parts Checklist (for 2101 single handset model)
Make sure your package includes the items listed here.
Batter
y
compartment
cover
Base
Handset
T
elephone
Handset
battery pack
AC Power
adaptor
line cord
For Model 2101-2 there will be ONE additional hand
battery pack and cover than shown above.
s
e
t
,charge
charge
c
r
ad
le,
For Model 2101-3 there will be TWO additional hand
se
t
s
,
c
r
ad
le
s,
battery packs and covers than shown above.
For Model 2101-4 there will be THREE additional handsets, charge cradles,
battery packs and covers than shown above.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
T
elephone
J
ack Requirements
Wall plate
To use this ph
modular telephone j
one pictured
don’t have a modular jack
o
n
e
,
you need an RJ11C type
which might look like the
If you
call your local phone
a
ck,
h
e
re
,
installed in your
home.
Modular
telephone
line jack
,
company to find out how to get one installed.
Installation
Digital Security System
Your cordless phone uses a digital security system to protect against false
ringing, unauthorized access, and charges to your phone line.
INSTALLATION NOTE: Some cordless telephones operate at
frequencies that may cause or receive interference with nearby
TVs, microwave ovens, and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be placed
near or on top of a TV, microwave oven, or VCR. If such interference
continues, move the cordless telephone farther away from these
appliances.
Certain other communications devices may also use the 1.9GHz
DECT frequency for communication, and, if not properly set, these
devices may interfere with each other and/or your new telephone.
If you are concerned with interference, please refer to the owner’s
manual for these devices on how to properly set channels to avoid
interference.
Typic
a
l
devices that may use the 1.9GHz DECT
frequency
for communication include wireless audio/video senders, wireless
computer networks, multi-handset cordless telephone systems, and
some long-range cordless telephone systems.
Important safety instructions
•
•
•
Use only the power supply listed in the user instructions.
Use only the batteries listed in the user instructions.
Do not allow the charging contacts or the battery to come into contact
with metal objects.
•
Do not open the hand
set, base station, or charger as you could be
exposed to high voltages.
•
•
•
Do not allow the charger to come into contact with liquids.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Always use the cables provided with the product
.
For pluggable qu , the socket-outlet shall be installed near the
e
ipment
equipment and shall beeasily accessible.
•
•
This equipment is not designed to make emergency calls when the
power fails. An alternative has to be made available to allow emergency
calls.
Do not expose the phone to excessive heat caused by heating
equipment or direct sunlight
.
•
•
Do not drop your phone or allow objects to fall on your phone.
Do not use any cleaning agents containing alcohol, ammonia, benzene,
or abrasives as these may harm the set
.
•
•
Do not use the product in places where thereare explosive hazards.
Do not let small metal objects come into contact with the product.This
can deteriorate audio quality and damage the product
.
•
•
Active mobile phones in the vicinity may cause interference.
Metallic objects may be retained if placed near or on the handset
r
eceiver
.
Overview of the base station
1
2
•
Charge/in use indicator
•
•
Find handsets
Enter registration mode
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the phone
1 • Earpiece.
2 • End the call.
•
Exit the menu/operation.
3 • Scroll up on the menu.
•
•
Increase the earpiece volume.
Enter the call log.
1
4 • Exit the menu/operation.
•
Backspace the characters
or digits.
5 • Scroll down on the menu.
Decrease the earpiece volume.
Enter the phonebook
•
•
.
6 • Enter redial list and dial the
recent number
15
2
3
4
.
7 • Flash the phone line.
14
13
8 • Press to enter a pause.
5
6
7
•
Press and hold to turn the
ringer on/off.
9 • Make the intercom call.
•
•
•
•
Make the conference call.
10
11
12
Microphone.
12
11
8
M
ute/un-
mut
e
the microphone.
9
Press and hold to lock/
unlock keypad.
10
•
In call log list
(for US only).
,
change format
16
13
•
Access the main menu.
14
•
Confirm selection.
•
Enter the options menu.
15
16
•
•
Make and receive calls.
Battery compartment door
.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DisplayIcons
In standby m
o
d
e
,
the icons shown on the main screentell you what
features are available on your handset
.
Icon Descriptions
When the handset is off the base station/charger
,
the bars indicate
the battery level (full, medium and low).
When the handset is on the base station/charger
,
the bars keep
scrolling until charging completes.
The empty battery icon flashes and you hear an alert tone.
The battery is low and needs recharging.
Indicates that the handset is registered and within range of the base
station.
Icon blinks when the handset is out of range or is searching for a b
ase.
The ringer is off.
There is an unheard voice message.
Installing the Phone
Installing the Handset Battery
NOTE: You must connect the handset battery before use.
N
i
c
m
V
p
k
e
/
a
e l me
t
I
h
a
K
;
V
l
,
H
ydride b
a
e
tt
e
r
y
(
N
i
-
MH
)
b
a
tt
e
r
C
y
a
(
p
Br nd
acity:
a
n
a
:
S
A
N
Model
Brand n
550
n
a
a
m
m
:
2SN-AAA55H-S-J1,
2
.
4
550
mA
e
:
BYD, Model
N,
n
a
a
m
m
e
e
:
:
H
-
AAA550
B
X
2
,
,
C
a
c
i
t
y
:
2
.
4
/
m
A
h
,
C
O
R
U
M
o
d
e
l
n
NI-MH AAA550
Capacity:2.4V/550mAh.), that is compatible with this unit.
1
.
Locate the battery and the battery compartment door which are
packaged together inside
a
plastic bag and are separate from the handset
.
2
.
Locate the battery compartmenton the back of the handset.
N
O
TE
:
To ensure proper battery installation, the connector is keyed
and can be inserted only one way.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
.
.
.
Plug the battery pack cord into the jack inside the compartment.
Insert the battery pack
Close the battery compartment by pushing the door up until it snaps
into place.
.
Base Station
1
.
Choose an area near an electrical outlet and a telephone wall jack
(RJ11C), and place your cordless telephone on a level surface, such as a
desktop or tabletop or youmay mount it on the wall.
,
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
4
5
.
.
.
.
Plug one end of the telephone line cord into the TEL LINE jack on the
back of the base and the other end into a modular jack
.
Plug the AC power converter into the electrical outlet and the
connector into the jack on the back of the base.
DC
Place the handset in the base cradle. The charge/in use indicator turns
on, verifying the battery is charging.
Allow the phone to charge for 16 hours prior to first
properly charge the phone, battery performance is compromised.
To reduce risk of personal injury fire, or damage use
yp 5060 120
DaMing, yp 060058
guide. to
un
u
s
e
.
If you don’t
CA
U
T
I
O
N
:
,
only the power adaptor
(
r
M
a
:
nu
f
a
n
ct
u
n
r
g
e
r
:
ESL,
T
e
:
I
e
A
:
,
S
Vac/
6
Vd
c
/
500
mA
;
M
a
nu
f
a
ct
u
e
r
N
a
To
T
D
M
-
C
,
120
V
a
c
/
6
V
dc
/
0
-
0
.
58
A
)
listed in the use
r
’
s
T
h
is
power
a
d
a
p
r
t
is intended to be correctly orientated in a vertical or floor m
o
position.
Set thedate and time format
1
2
3
4
.
.
.
.
Press MENU
Select [CLOCK]
Select [DATE FORMAT] or [TIME FORMAT].
.
>
[SET FORMAT], then press [OK] to confirm.
Select the setting. Select [DD/MM] [MM/DD] as the date display and [12
HOURS] or [24 HOURS] as the time display. Then press [OK] to confirm.
»» The setting is saved.
Set thedate and time
1
2
3
.
.
.
Press MENU
Select [CLOCK]
Press the numeric buttons to enter the date, and then press [OK] to
.
>
[SET DATE/TIME], then press [OK] to confirm.
confirm.
»» On the handset, the time set menu is displayed.
Press the numeric buttons to enter the time.
If the time is in 12-hour format,press to select [AM] or [PM].
4
.
•
/
5 Press [OK] to confirm.
What is standby mode?
Your phone is in standby mode when it is idle. The standby screen displays
the handset na
m
e
,
handset nu
m
b
e
r,
date and
t
i
m
e
,
signal ico
n
,
and battery
icon.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Check thesignal strength
It displays the link status between the handset and base station. The signal
icon was shown steady on when handset is linked with base.
Ensure the handset is linked to the base station before you make or receive
calls and carry out the phone functions and features.
•
If you hear warning tones when you are on the ph
almost out of battery or the handset is out of range.
o
n
e
,
the handset is
Charge the battery or move the handset closer to the base station.
Self-defined settings
Customize the settings to make it your own phone.
Personalize the phone display
Name the handset
The name of the handset can be up to 12 characters. It is displayed on the
handset screen in standby mode.
1
2
3
4
.
.
.
.
Press MENU
Select [PERSONAL SET]
Enter or edit the name. To erase
Press [OK] to confirm.
.
>
[HANDSET NAME], then press [OK] to confirm.
a
character press [BACK].
,
»» The setting is saved.
Set the display language
1
2
3
.
.
.
Press MENU
Select [PERSONAL SET]
Select a language, then press [OK] to confirm.
.
>
[LANGUAGE], then press [OK] to confirm.
»» The setting is saved.
Personalize the sounds
Set the handset’s melody
You can select from 10melodies
1
2
.
.
Press MENU.
Select [PERSONAL SET]
>
[HANDSET TONES]
>
[RING MELODY], then press
[OK] to confirm.
3
.
Select a melody, then press [OK] to confirm.
»» The setting is saved.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Set the handset’s volume
You can select among4 volume levels or [OFF].
1
2
.
.
Press MENU.
Select [PERSONAL SET]
>
[HANDSET TONES]
>
[RING VOLUME], then press
[OK] to confirm.
3
.
Select a volume level, then press [OK] to confirm.
»» The setting is saved.
Tip
•• To turn off the m
e
lo
d
y
,
press and hold [#
PA
U
SE
/
R
I
N
G
E
R
]
in standby
mode. Then displays on the screen.
Set the key tone
Key tone is the sound made when you press
a
key on the handset
.
1
2
.
.
Press MENU.
Select [PERSONAL SET]
>
[HANDSET TONES]
>
[KEY BEEP], then press [OK]
to confirm.
3
.
Select [ON]/[OFF], then press [OK] to confirm.
»» The setting is saved.
Advanced settings
Auto conference
To join an external call with anotherhandset, press TALK button.
Activate/Deactivate auto conference
1
2
3
4
.
.
.
.
Press MENU.
Select [ADVANCED SET] >[CONFERENCE], then press [OK] to confirm.
Select [ON]/[OFF], then press [OK] to confirm.
The setting is saved.
R
egistration
You can register additional handsets to the base station. The base station
can register up to 4 handsets.
1
2
3
.
.
.
Press MENU on the handset
Select [ADVANCED SET] [REGISTRATION], then press [OK] to confirm.
Press and hold on the base station for 5 seconds until you hear a
confirmation beep
io is completed in less than 2 m
handset number to the handset
.
>
.
»»
assigns
R
e
g
i
s
a
t
ra
t
n
inu
t
e
s.
The base automatically
.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Unregister the handsets
1
.
If two handsets share the same base
handset with anotherhandset
Press MENU
Select [ADVANCED SET]
s
t
a
t
io
n
,
you can unregister a
.
2
3
4
5
.
.
.
.
.
>
[UNREGISTER], then press [OK] to confirm.
Select the handset number to be unregistered.
Press [OK] to confirm.
»» The handset is unregistered.
Tip
•
The handset number displays beside the handset name in standby mode.
Restore default settings
You can reset your phone settings to the original factory settings.
1
.
Press MENU
.
2. Select [ADVANCED SET]
>
[RESET], then press [OK] to confirm.
»» The handset displays a confirmation request.
3. Press [OK] to confirm.
»» All settings are reset
.
Area Code
1
2
3
4
.
.
.
.
Press MENU.
Select [ADVANCED SET]
Use the touch-tone pad to enter your 3-digit area code.
Press [OK] to confirm.
>
[AREA CODE], then press [OK] to confirm.
N
OTE
:
To restore the default setting to - - -, press and release BACK
button when the screen displays AREA
CODE.
Select therecall duration
Ensure that the recall time is set correctly before you can answer a second
call. In normal case, the phone is already preset for the recall duration.
can select among3 options:
You
[SHORT], [MEDIUM] and
[
L
O
N
G
]
.
The number of available options varies
with different countries. For details, consult your service provider
.
1
2
3
.
.
.
Press MENU
Select [ADVANCED SET]
Select an option, then press [OK] to confirm.
.
>
[FLASH TIME], then press [OK] to confirm.
»» The setting is saved.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Dial mode
Note: This feature only applies to models that support both tone and pulse
dial.
Dial mode is the telephone signal used in your coun
t
ry
.
The phone supports
tone (DTMF) and pulse (rotary) dial. Consult your service provider for more
detailed information.
Set the dial mode
1
2
3
.
.
.
Press MENU
Select [ADVANCED SET]
Select a dial mode, then press [OK] to confirm.
.
>
[DIAL MODE], then press [OK] to confirm.
»» The setting is saved.
Note: If your phone is in pulse dial mode, press [*] button during a call
for temporary tone mode. Digits entered for this call are then se
nt
out as tone signals.
First ring
If you have subscribed to the caller ID service with your service
p
r
ovi
d
e
r,
your phone can suppress the first ring before the caller ID displays on the
screen. After the phone is reset, it can detect automatically if the caller ID
se
r
vi
c
e
i
s sub
s
c
ri
b
ed
and start to suppress the first
ri
ng
.
Yo
u
can change
this setting to suit your preference. This feature only applies to models with
first ring support.
Turn the first ring on/off
1
2
3
.
.
.
Press MENU
Select [ADVANCED SET]
Select [ON]/[OFF], press [OK] to confirm.
.
>
[FIRST RING], then press [OK] to confirm.
»» The setting is saved.
Note: To reset the first ring status, go to the reset menu.
Telephone Operation
Make a call
You can make a call in these ways:
•
•
•
•
•
•
Quick call
Dial before youcall
Redial the most recent number
Call from the redial list
Call from the phonebook list
Call from the call log
.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick call
1
2
.
.
Press
Dial the phone number
.
.
»» The number is dialed out.
»» The duration of your current call is displayed.
Dial before you call
1
•
•
2
.
Dial the phone number
To erase
To enter
Press
a
a
digit
pause, press and hold [#P
to dial out the call.
,press [BACK].
AUSE/RINGER].
.
Redial the most recent number
1
2
3
.
.
.
Press
Press REDIAL
Press [OK].
.
.
»» The most recent number is then dialed out.
Call from the redial list
1
2
.
.
Press REDIAL.
Press the UP or DOWN key to select the number with your desired dial
out.
3
.
Press the CALL.
Call from the phonebook list
1
2
3
.
.
.
Press the PHONEBOOK
Press the UP or DOWN key to select the number you desire.
Press the CALL
.
.
Call from the call log
1
2
3
4
.
.
.
.
Press the CALLER ID
Press OK entry the CALL LIST
Press the UP or Down key to select the number you desire.
.
Press CALL
.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: The call timer displays the talk time of your current call.
Note: If you hear warning tones, the handset is almost out of battery
or the handset is out of range.
C
h
a
r
g
e
the battery or move the
handset closer to the base station.
End a call
You can end a call in these ways:
•
Press
;
or
•
Place the handset on the base station or charging cradle.
Answer a call
When the phone rings, press
to answer the call.
Warning: When the handset rings, keep the handset away from your ear to
avoid ear damage.
N
ot
caller ID service with your service provider.
Tip
e
:
T
h
e
caller
I
D
service is available if you have registered to
the
••When there is a missed call, the handset displays a notification message.
Turn off the ringer for all incoming calls
There are two ways to turn off the ringer
:
1
.
Press and hold
screen.
[
#
PA
U
SE
/
R
I
N
G
E
R
]
in standby m
o
d
e
.
displays on the
2
.
Press MENU, Select the [PERSONAL SET]>[HANDSET
NE OULME]>[OFF].
T
O
S
]
>
[
R
I
N
G
E
R
V
Adjust theearpiece volume
Press
or
to adjust the volume during a call.
»» The earpiece volume is adjusted and the phone is back to the call
screen.
Mute themicrophone
1
.
Press [MUTE] button during a call.
»» The handset displays [MUTE ON].
»» The caller cannot hear you, but you can still hear his/her voice.
2
.
Press [MUTE] button again to un-mute the microphone.
»» You can now communicate with the caller
.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Intercom Operation
An intercom call is a call to another handset that shares the same base
s
t
a
t
io
n
.
A
conference call involves
a
conversation among yo
u
,
another
handset user and the outside callers.
Make
Note
a
call to another handset
•• If the base station only has 2 registered handsets, press INT to make a
call to anotherhandset
Press INT. The handsets available for intercom are displayed.
then press [OK] to confirm.
»» The selected handset rings.
Press on the selected handset
»» The intercom is established.
Press to cancel or end the intercom call.
Note
.
1
.
2. Select a handset number
,
3
.
.
4
.
•• If the selected handset is occupied in a call, you hear
a
busy tone.
While you are on the phone
You can go from one handset to anotherduring a call:
1
2
3
.
.
.
Press INT
The current caller is put on hold.
Select a handset number then press [OK] to confirm.
.
,
Toggle between calls
Press INT to switch between the outside call and the intercom call.
Transfer a call
1
2
3
.
.
.
Press INT during a call.
Select a handset number
Press when the other side answers your call.
,
then press [OK] to confirm.
»» The call is now transferred to the selected handset
.
Make
a
conference call
A 3-way conference call is a call between yo
the outside c ll
During an external call
u
,
another handset user and
a
e
r.
It requires two handsets to share the same base
station.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
1
.
Press INT to initiate an internal call.
»» The handsets available for intercom are displayed.
»» The external caller is put on hold.
2. Select or enter a handset number
»» The selected handset rings.
Press on the selected handset
»» The intercom is established.
Press and hold INT on your handset
,
then press [OK] to confirm.
3
.
.
4
.
.
»» You are now on a 3-way conference call with the external call and the
selected handset
.
5. Press
Note
to end the conference call.
Press
to join an ongoing conference with another handset if
[ADVANCED
SET] >[CONFERENCE] is set to [ON].
During the conference call
1
.
Press INT to put the external call on hold and go back to the internal call.
»» The external call is put on hold.
2
3
.
.
Press INT to toggle between the external and internal call.
Press and hold INT to establish the conference call again.
Note
•• If a handset hangs up during the conference c
remains connected to the external call.
all, the other handset
Text and number
You can enter text and numbers for handset na
and other menu items.
s
m
e
,
phonebook
records,
Enter text and number
1
.
Press once or severaltimes on the alphanumeric key to enter the
selected character
.
2
.
Press [BACK] to delete the character
.
Example to write “Paul”
Press
once:
two times:
Press three times:
Press and hold
7
once:
P
Press
8
2
a
Press
u
5
l
[
#
PA
U
SE
/
R
I
N
G
E
R
]
to switch between the uppercase and
22
Download from Www.Somanuals.com. All Manuals Search And Download.
lowercase letters.
Phonebook
This phone has a phonebook that stores up to 50 records. You can access
the phonebook from the handset. Each record can have a name up to 14
characters long and a number up to 24 digits long.
View thephonebook
Note
•• You can view the phonebook on one handset only each time.
1
2
.
.
Press MENU > [PHONEBOOK] > [LIST ENTRY] to access the phonebook li
Select a contact and view the available information.
st.
Search a record
You can search the phonebook records in these ways:
•
Scroll the contacts list
.
•
Enter the first character of the contact
.
Scroll thecontact list
Press MENU
menu.
1
.
>
[PHONEBOOK]
>
[LIST ENTRY] to access the phonebook
2
.
Press
and
to scroll through the phonebook entries.
Enter the first character of a contact
1
2
.
.
Press MENU > [PHONEBOOK] > [LIST ENTRY] to access the phonebook li
Press the alphanumerical key that corresponds to the character
st.
.
The first record that starts with this character is displayed.
Call from the phonebook
1
2
3
.
.
.
Press MENU
>
[PHONEBOOK]
>
[LIST ENTRY] to access the phonebook.
Select a contact in the phonebook list
Press to make the call.
.
Access thephonebook during a call
1
2
.
.
Press [OK], select [PHONEBOOK] then press [OK] again to confirm.
Select the contact,then press [OK] to confirm.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
»» The number can beviewed.
Add a record
Note
•• If your phonebook memory is
full, the handset displays a notification
message. Delete some records to add newones.
1
2
3
4
.
.
.
.
Press MENU
Select [PHONEBOOK]
Enter the name then press [OK] to confirm.
Enter the number then press [OK] to confirm.
.
>
[NEW ENTRY], then press [OK] to confirm.
,
Tip
•• For more information on how to edit the name and nu
section on Text and numbers.
m
b
e
r,
seethe
Tip
•• Press and holdto [#PAUSE/RINGER] to insert a pause.
»» Your newrecord is saved.
Edit a record
1
2
3
4
5
.
.
.
.
.
Press MENU.
Select [PHONEBOOK]
Select the contact,then press [OK] to confirm.
Edit the name, then press [OK] to confirm.
Edit the number then press [OK] to confirm.
>
[EDIT ENTRY], then press [OK] to confirm.
,
»» The record is saved.
Delete a record
1
.
Press MENU.
2. Select [PHONEBOOK]
>
[DELETE ENTRY], then press [OK] to confirm.
3. Select a contact,then press [OK] to confirm.
»» The handset displays a confirmation request
4. Press [OK] to confirm.
.
»» The record is deleted.
Delete all records
1
.
Press MENU.
2. Select [PHONEBOOK]
>
[DELETE ALL], press [OK] to confirm.
The handset displays a confirmation request.
3. Press [OK] to confirm.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
»» All records are deleted.
Call log
The call log stores the call history of all missed or received c
a
ll
call time
This feature is available if you have registered to the caller ID
service with your service provider
Your phone can store up to 10 call records. If the caller allows the display
of his you can view his name or nu The call records are
displayed in chronological order with the most recent received call at the
s
.
The
incoming call history includes the name and number of the caller
,
and da
t
e.
.
i
d
e
n
t
i
t
y
,
mber.
top of the list
Note
.
•• Ensure the number in the call list is valid before you can call back
directly from the call list
.
Reviewing CID
Press
Records
1
.
.
2. Select [CALL LIST], then press [OK] to confirm.
»» The incoming call log is displayed.
3
.
Select
a
record, then press [OK] to view the available information.
Storing CID Records in phonebook
Press
1
.
.
2. Select [CALL LIST], then press [OK] to confirm.
»» The incoming call log is displayed.
3. Select a record, then press [OK] to confirm.
4. Select [SAVE NUMBER], then press [OK] to confirm.
5. Enter and edit the name, then press [OK] to confirm.
6. Enter and edit the number
,
then press [OK] to confirm.
»» The record is saved.
Dialing
a
CID Number
1
2
3
4
.
.
.
.
Press
.
Select [CALL LIST], then press [OK].
Select
Press
a
record on the list
.
to make the call.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
N
O
TE
:
Depending on
formatted when it is received, and (b) whether or not you p
pre-programmed your local area code into the dv
menu, you may need to the format of the incoming
(
a
)
how the incoming
c
a
ll
e
r
’
s
phone number
is
re
vio
us
l
y
g
s
A
a
n
c
e
d
settin
a
d
j
u
s
t
c
a
ll
e
r
’
stored phone number before making the call, press the
button to adjust the number, and try again.
F
O
R
MAT/*
Number of digits
Explanation
Example
Eleven digits
long distance code “1”
+3-digit area code
1-317-888-8888
+7-digit telephone number
3-digit area code
7-digit telephone number
7-digit telephone number
.
Ten digits
+
317-888-8888
888-8888
.
.
Seven digits
Deleting
a
CID Record
1
2
3
4
5
.
.
.
.
.
Press
.
Select [CALL LIST], then press [OK] to confirm.
The incoming call log is displayed.
Select a record, then press [OK] to confirm.
Select [DELETE ENTRY], then press [OK] to confirm.
»» The record is deleted.
Deleting All CID
Press
Records
1
.
.
2. Select [CALL LIST], then press [OK] to confirm.
»» The incoming call log is displayed.
3
.
Press [OK] to enter the options menu.
4. Select [DELETE ALL], then press [OK] to confirm.
»» The handset displays a confirmation request
5. Press [OK] to confirm.
.
»» All records are deleted.
Redial list
The redial list stores the call history of dialed
c
a
ll
s
.
It includes the names
and
/
o
r numbers you have
c
a
ll
e
d
.
This phone can store up to 5 redial
records.
View the redial records
1
.
Press REDIAL to enter the list of dialed calls.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
2
.
Use
and
to view the call list.
Redial a call
1
2
.
.
Press REDIAL.
Select the record you want to call. Press
.
»» The number is dialed out.
Save
a
redial record to the phonebook
1
2
3
4
5
.
.
.
.
.
Press REDIAL to enter the list of dialed calls.
Select a record, then press [OK] to confirm.
Select [SAVE NUMBER], then press [OK] to confirm.
Enter and edit the name, then press [OK] to confirm.
Enter and edit the number then press [OK] to confirm.
,
»» The record is saved.
Delete
a
redial record
1
2
3
.
.
.
Press REDIAL to enter the list of dialed calls.
Select a record, then press [OK] to confirm.
Select [DELETE ENTRY], then press [OK] to confirm.
»» The record is deleted.
Delete all redial records
1
2
3
4
5
.
.
.
.
.
Press REDIAL to enter the list of dialed calls.
Press [OK] to enter the options menu.
Select [DELETE ALL], then press [OK] to confirm.
The handset displays a confirmation request.
Press [OK] to confirm.
»» All records are deleted.
K
eypad lock
You can lock the keypad to prevent accidental button presses.
Lock the keypad
1
.
Press and hold [*/FORMAT] key in standby mode.
»» The keypad is locked.
Note
•
When the keypad is locked, no call can bemade. You can still answer the
incoming calls.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
The keypad is unlocked during the call but is locked automatically after you
finish the call.
Unlock the keypad
1
.
Press and hold [*/FORMAT] key.
»» The keypad is unlocked.
Locate the handset
1
.
Press
on the base station.
»» All handsets connected to this base station ring.
Press on the base stationagain to stop ringing.
»» All handsets stop ringing; or
Press anykey on one handset to stop ringing.
2
.
3
Default settings
Language
Handset name
Time/Date
Date format
Time format
English
Handset
00:00 01/0
DD-MM
24hr
1
1/10
Phonebook memory
Recall time
Empty
Long (600ms)
First ring
Conference
On
On
Dial mode
T
one
Melody
Level
H/S ringer melody
H/S ringer volume
H/S earpiece volume
Handset key beep
Incoming call log
Redial list
1
3
3
Volume
On
Empty
Empty
Frequently asked questions
The signal icon blinks on the screen
•
•
The handset is out of range. Move it closer to the base station.
If the handset displays [UNREGISTERED], register the handset
Tip
For more
.
•
i
n
f
o
rm
a
t
io
n,
see
“Re
g
i
s
t
r
a
t
ion” on the Advanced Settings
section.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
If I fail to register the additional handsets to the base station, what do do?
I
Your base memory is full. Un-register the unused handsets and try again.
No dialing tone
•
Check your phone connections.
•
The handset is out of range. Move it closer to the base station.
No docking tone
The handset is not placed properly on the base station/charger
The charging contacts are dirty.
•
.
•
Disconnect the power supply first and clean the contacts with a damp
cloth.
The handset on thecharger does not charge.
•
•
Ensure the battery pack is inserted properly.
Ensure the handset is placed properly on the
animates when charging.
c
ha
rg
e
r.
The battery icon
•
Batteries are defective. Purchase new ones from your dealer
.
No display
•
Ensure the batteries are charged.
•
Ensure thereare power and phone connections.
Bad audio (crackles, echo, etc.)
The handset is nearly out of range. Move it closer to the base station.
•
The phone receives interference from the nearby electricalapplian
Move the base station away from them.
ces.
•
The phone is at a location with thick wall
them.
s
.
Move the base away
from
The handset does not ring.
Ensure the handset ringtone is turned on.
The caller ID does not display.
•
•
The service is not activated. Check with your service provider
The caller’s information is withheld or unavailable.
When see [WAITING…] on the screen, what is happening with the ph
.
I
one?
The phone is recalling the memory of the phonebook and call lo
items of information are stored in the base station.
Then the handset retrieves the
g
.
Both
29
Download from Www.Somanuals.com. All Manuals Search And Download.
data from the base station after a few
s
e
cond
s
.
When you press
/
call log/phonebook information is displayed on the handset
.
The handset loses connection with the base or the sound is
during a call.
d
i
st
o
r
t
ed
••
D
i
sconn
e
c
t
the power supply from both the handset and base
st
a
t
io
n
.
Try again after 1 minute.
W
arrantyAssistance
Your sales receipt will be required to demonstrate proof of purchase in
order to validate your warranty li ili You may want to attach either
e
g
i
b
ty.
the original, or a photocopy, of your sales receipt to this booklet for future
reference.
If this product was received as a gift,it is suggested you jot down the date
of gift rec
quired during the warranty period. If the equipment is causing harm to the
telephone the telephone company may require that you discon-
eipt, as this information will be valuable should service be re-
n
etwork,
nect the equipment until the problem is resolved.
Purchase Date or Date Received as Gift
Name of
instructions on how to obtain warranty
you may write to us
upreme Power USA LLC
PO Box 501045
Indianapolis IN 46250-1045
Please do not send products to this address as it only adds delays in
Store
______________
you may call Customer
F
o
r
service,
Care
p
r
e
f
e
r,
at:
S
service and may result in lost or damaged product.
written communication only.
If the equipment is causing harm to the telephone network
T
h
i
s
PO BOX is for
,
the telephone
company may require that you disconnect the equipment until the problem
is resolved.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
LimitedWarranty
What your limited warranty covers:
Defects in materials or workmanship
For how long after your purchase:
One year from date of purchase. Please retain your sales
will act as your proof of purchase in order to validate warranty status.
What we will do:
Provide you with a new or
same or similar m The exchange model is under warranty for the
remainder of the original product's one year warranty, or 90 days from
the date the replacement product was shipped to yo whichever is
longer
How to get service:
Call Customer Care at
•
.
•
,
receipt,as that
•
,
at our option,
a
refurbished exchange unit of
o
del.
u
,
.
•
1-877-722-4908. Please have your product with
you and please have your model number and date code available
when calling us. The model number and date code can be found on the
underside of the base unit.
If you are within your limited warranty period and it is determined that
service is required:
•
We will ask that you properly pack your product to avoid shipping
damag We recommend that you use the original carton and packing
e
.
materials.
•
We will ask you to include with your product the following:
Your na
m
e
,
return shipping address and daytime phone number
handwritten or typed on a sheet of paper
A legible copy of your sales receipt (p l e a s e do not send the original
sales receipt)
•
•
Ship your product
shipping your product via a traceable carrier
for lost mis-directed or damaged shipments. You may want to write the
date shipped, carrier and tracking number here:
p
r
e
pa
i
d
,
to the address we
p
r
ovi
d
e
.
We suggest
,
as we are not responsible
,
Upon receipt of your product we will validate your product is under
warranty and if determined your product is warranty li we will ship
to you a new at our io refurbished exchange unit of same or
similar model. This exchange unit will beshipped to you at no cost
e
gible,
o
r,
o
p
t
n
,
a
.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
What your limited warranty does not cover
:
•
Customer
I
n
s
t
r
u
c
t
io
n
.
(Your Owner’s Manual provides information
regarding operating and installation instructions. Additional information
may beobtained by contacting the retailer)
Installation and set-up service adjustments.
Batteries.
•
•
•
•
•
•
•
Damage from misuse, neglect
Products which have been modified or incorporated into other products
Products that have been serviced by an unauthorized servicer
Products purchased or serviced outside the USA or Canada.
Acts of nature, such as but not limited to lightning damage.
,
unauthorized
r
epair
.
.
,
Limitation of Warranty:
•
THIS LIMITED WARRANTY IS THE ONLY WARRANTY APPLICABLE
THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED
UD ALL IMPLIED WARRANTIES O F MERCHANTABILITY OR
TO
(
I
N
C
L
I
N
G
FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO
VERBAL OR WRITTEN INFORMATION GIVEN BY SUPREME POWER USA
LLC, ITS AGENTS, E M P L O Y E E S , RETAIL DEALERS OR INDEPENDENT
CONTRACTORS SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE
THE SCOPE OF THIS
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
THE EXCLUSIVE REMEDY OF THE CONSUMER. SUPREME POWER US
LLC SHALL NOT BE LIABLE FOR INCIDENTAL OR
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR A
WARRANTY.
•
A
C
O
N
S
E
Q
U
E
R
N
T
I
I
N
A
L
I
S
G
OUT OF ANY
B
R
E
ACH OF ANY
E
C
XPRESS OR IMPLIED
RR
W
A
I
RR
A
A
N
N
T
D
Y
O
N
T
H
I
S
P
R
O
DUCT.
T
H
I
S
D
I
S
L
A
I
M
E
R
O
F
W
A
A
N
T
E
S
LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE
OF EXCEPT TO THE TENT PROHIBITED BY PP
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
S
CA
TATE
I
N
D
I
A
N
A
E
X
A
L
F
I
I
B
E
LE
SS
T
N
FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO
APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
THE
How state law relates to this warranty:
Some states do not allow the exclusion nor limitation of incidental or
consequential da ag or limitations on how long an implied warranty
m
es,
lasts so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you also may have other
rights that vary from stateto state.
If you purchased your product outside the USA or Canada:
This warranty does not apply
.
Contact your dealer for warranty
information.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Product
Please complete and mail the
du registration is not required for warranty coverage but does
Registration:
•
P
ro
du
c
t
Registration Card packed with
P
r
o
ct
allow us to contact you should it benecessary.
Please do not send any products to the Indianapolis address listed in this
manual or on the
carton.
This will only add delays in service for your
product.
2101
Printed in China
10-35
33
Download from Www.Somanuals.com. All Manuals Search And Download.
|