2-9925
900MHz Two-Line
Cordless Telephone
User’s Guide
We bring good things to life.
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Your GE 900 MHz Cordless Telephone is designed to give you flexibility in
use and high quality performance. To get the most from your new
cordless telephone, we suggest that you take a few minutes right now to
read through this instruction manual.
TABLE OF CONTENTS
GETTING STARTED ................................ 2
BEFORE YOU BEGIN .......................... 2
MODULAR JACK REQUIREMENTS ...... 2
INSTALLATION OPTIONS ...................... 3
DESKTOP INSTALLATION...................... 4
WALL MOUNT INSTALLATION .............. 6
CORDLESS PHONE BASICS...................... 8
MAKING A CALL ............................... 8
LINE INDICATOR LIGHTS .................. 8
DUAL RINGER TONES ..................... 9
REDIAL(RE/PA)............................ 9
RECEIVING A CALL ............................ 9
FLASH BUTTON ................................ 9
VOLUME ........................................ 10
RING/PWR (RINGER AND POWER)
ADVANCED FEATURES .......................... 13
CHANNEL BUTTON (CHAN) ............ 13
THE MEMORY FEATURE ................... 13
STORING A NUMBER IN MEMORY ... 13
CHANGING A STORED NUMBER ...... 14
STORING A REDIAL NUMBER ........... 14
STORING A PAUSE IN MEMORY ..... 14
DIALING A STORED NUMBER ......... 15
CHAIN DIALING FROM MEMORY ..... 15
CONNECTING A HEADSET
TO THE HANDSET ......................... 16
CONNECTING THE BELT CLIP ............. 17
CHANGING THE BATTERY ...................... 18
BATTERY SAFETY PRECAUTIONS ..... 18
TROUBLESHOOTING GUIDE ................... 19
CAUSES OF POOR RECEPTION ............... 21
GENERAL PRODUCT CARE .................... 21
SERVICE ............................................ 22
ACCESSORY ORDER FORM ................... 23
INDEX ............................................... 25
LIMITED WARRANTY ............................ 26
SWITCH .................................. 10
MUTE BUTTON ............................... 11
TEMPORARY TONE .......................... 11
HOLD BUTTON ............................... 12
CONFERENCE BUTTON ..................... 12
PAGING THE HANDSET ..................... 12
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
T H E L I G H T N I N G
FLASH AND ARROW-
HEAD WITHIN THE
CAUTION: TO REDUCE THE THE EXCLAMATION
RISK OF ELECTRIC SHOCK, POINT WITHIN THE
DO NOT REMOVE COVER T R I A N G L E I S
A
TRIANGLE IS
WA R N I N G S I G N
ALERTING YOU OF
A
WARNING
SIGN
( O R B A C K ) . N O U S E R -
SERVICEABLE PARTS IN-
SIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
ALERTING YOU OF
I
M
P
O
R
T
A
N
T
WARNING:TO PREVENT FIRE
OR ELECTRICAL SHOCK HAZARD,
DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
"
D
A
N
G
E
R
O
U
S
I N S T R U C T I O N S
A C C O M PA N Y I N G
T H E P R O D U C T.
VOLTAGE" INSIDE
THE PRODUCT.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
1
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
Make sure your package includes the items shown here.
LINE
1
LINE
2
CHAN
HOLD
TALK
LINE
1
LINE
2
2
5
8
0
ABC
JKL
DEF
1
4
3
LINE
LINE
1
MNO
GHI
6
9
#
2
PQRS
TUV
WXYZ
7
CHARGE/
PAGE
TONE
OPER
*
RE/PA
MEM
MUTE
ON OFF–RING
FLASH
CONF
PWR–ON OFF
PAGE
CONF/MUTE
BAT LOW
Handset
Base
Base plate
Short telephone line cord
Two telephone line cords
AC power adapter
BEFORE YOU BEGIN
MODULAR JACK REQUIREMENTS
You need an RJ11 type modular jack, which is the most
common type of phone jack and might look like the one
pictured here. If you don’t have a modular jack, call your
local phone company to find out how to get one installed.
INSTALLATION NOTE: Some cordless telephones operate at frequencies that
may cause interference to nearby TVs and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be placed near or on
top of a TV or VCR. If interference continues, moving the cordless telephone
farther away from the TV or VCR will often reduce or eliminate the interference.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION OPTIONS
Although you can use your GE 2-line cordless telephone with a single
phone line, you must have two lines (separate phone numbers) to use a
two-line system. The following diagrams show two possible systems:
Two Lines on Single Modular Jack
One type of two-line phone
system uses a single RJ14
modular jack which contains both
phone lines. Connect the phone
cord to the L1 or L2 jack.
You must use a 4-conductor
telephone line cord like the ones
that are packed with your unit.
Line 1
Line 2
Each Line on a Separate Modular Jack
If you have two separate phone
jacks, each with its own line,
connect one of the phone cords to
the L2 jack, and connect the
remaining phone cord to the L1 or
L2 phone jack located on the back
of the phone.
NOTE: Connect the phone cord
from the L1 or L2 jack to the
outlet that you want to be line 1.
NOTE: Two-line capability
requires two-line service from
your local telephone company.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
DESKTOP INSTALLATION
7
3
6
5
1
2
T/P switch
Two Lines on a Single Modular Jack
1. Attach the base plate.
2. Set the T/P switch to T for touch-tone service, or P for pulse (rotary)
service. If you don’t know which type of service you have, check with
the phone company.
3. Raise the base antenna.
4. Set the RING switch to ON so the handset rings for incoming calls.
5. Plug the telephone line cord into the L1 or L2 jack located on the back of
the phone and into a dual line modular jack.
6. Plug the power supply cord into the base and into an AC outlet.
7. Place handset in the base to charge for 12 hours. The CHARGE/PAGE
light comes on indicating that the battery is charging. If you don’t
charge the handset battery properly (for 12 hours) when you first set up
the phone, the battery’s long-term performance will be compromised.
NOTE: Use only the Thomson 5-2420A or 5-2420B power supply that came
with this unit. Using other adapters may damage the unit.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
7
3
6
5
1
2
T/P switch
Each Line on a Separate Modular Jack
1. Attach the base plate.
2. Set the T/P switch to T for touch-tone service, or P for pulse (rotary)
service. If you don’t know which type of service you have, check with
the phone company.
3. Raise the base antenna.
4. Set the RING switch to ON so the handset rings for incoming calls.
5. Plug one of the telephone line cords into the L2 jack and into a single
line modular jack. Connect the remaining phone cord to the L1 or L2
phone jack located on the back of the phone and into a single line
modular jack.
6. Plug the power supply cord into the base and into an AC outlet.
7. Place handset in the base to charge for 12 hours. The CHARGE/PAGE
light comes on indicating that the battery is charging. If you don’t
charge the handset battery properly (for 12 hours) when you first set up
the phone, the battery’s long-term performance will be compromised.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1
WALL MOUNT INSTALLATION
Two Lines on a Single Modular Jack
2
1. Remove the handset hook; turn it upside
down, and put it back in the slot. You need
to do this so the handset doesn’t fall out of
the base.
2. Plug the telephone line cord into the L1 or
L2 jack on the back of the unit. Wrap the
extra line cord around the cord wrap on
the bottom of the base and then thread it
through the top of the base plate.
3. Connect the power supply adapter to the
POWER 9V DC jack on the back of the unit.
Then thread it through the bottom of base.
4. Reverse the direction of the base plate and
replace it by putting the tabs into the slots
on the top of the unit first and snapping
the bottom tabs into place.
3
4
5. Plug the telephone line cord into the dual
line modular jack.
6. Slip the mounting holes over the wall plate
posts and slide the unit down firmly into
place. (Wall plate not included.)
5
7. Set the T/P switch to T if you have touch-
tone service or to P (pulse) if you have
rotary dial service.
8. Set the RING switch to ON so the handset
rings for incoming calls.
9. Plug the power supply adapter into an
AC outlet and raise the antenna.
10
10. Place the handset in the base to charge for
12 hours. The CHARGE/PAGE light comes
on. If you don’t charge the handset battery
properly (for 12 hours) when you first set
up the phone, the battery’s long-term
performance will be compromised.
9
LINE
LINE
1
2
CHANRGE/
PAGE
PAGE
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Each Line on a Separate Modular Jack
1
1. Remove the handset hook; turn it upside
down, and put it back in the slot. You need
to do this so the handset doesn’t fall out of
the base.
2
2. Plug one of the telephone line cords into the
L1 or L2 jack on the back of the unit, wrap the
extra line cord around the cord wrap on the
bottom of the base, and then thread it through
the top of the base plate.
3. Plug the remaining telephone line cord into
the L2 jack on the back of the unit.
4
4. Connect the power supply adapter to the
POWER 9V DC jack on the back of the unit,
and then thread it through the bottom of base.
5. Reverse the direction of the base plate and
replace it by putting the tabs into the slots on
the top of the unit first, and then by snapping
the bottom tabs into place.
5
6. Plug the telephone line cord from the L1 or L2
jack into a single line modular jack that you
want to be line 1.
6
7
7. Plug the other telephone line cord into the
single line modular jack you want to be line 2.
8. Slip the mounting holes over the wall plate
posts and slide the unit down firmly into
place. (Wall plate not included.)
9. Set the T/P switch to T if you have touch-tone
service or to P (pulse) if you have rotary dial
service.
9
10. Set the RING switch to ON so the handset
rings for incoming calls.
12
11. Plug the power supply adapter into an AC
outlet and raise the antenna.
11
LINE
LINE
1
2
CHANRGE/
PAGE
12. Place the handset in the base to charge for 12
hours. The CHARGE/PAGE light comes on. If
you don’t charge the handset battery properly
(for 12 hours) when you first set up the
phone, the battery’s long-term performance
will be compromised.
PAGE
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CORDLESS PHONE BASICS
MAKING A CALL
After initial set up, put handset in the
base for 12 hours to charge the battery.
TALK button
LINE 1 and LINE 2
indicator lights
The cordless phone automatically selects
the last line you used. The only two
things you need to know to make a call
are:
1. Press LINE 1 or LINE 2 to select a line
before you dial.
2. Press LINE 1 or LINE 2 (whichever line
you are talking on) or place the
handset in the base to hang up.
LINE
1
LINE
2
CHAN
HOLD
TALK
Otherwise, it works just like any other
phone.
LINE
1
LINE
2
ABC
JKL
DEF
1
4
2
5
3
NOTE: You can press TALK instead of
pressing LINE 1 or LINE 2. The phone
defaults to the last line that was used.
MNO
GHI
6
9
#
PQRS
TUV
WXYZ
7
8
0
OPER
TONE
*
LINE INDICATOR LIGHTS
RE/PA
MEM
MUTE
ON OFF–RING
Above each line button is a Red indicator
light which informs you the status of
each line.
FLASH
CONF
PWR–ON OFF
CONF/MUTE
BAT LOW
Light
Status
Solid
Blinking
Line is in use
Line on hold
LINE 2 button
LINE 1 button
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DUAL RINGER TONES
Your cordless telephone has separate and
distinct ringer sounds for LINE 1 and LINE
2. This will allow you to determine the line
of an incoming call, even in another room.
If you are talking on one line and some-
one calls on the other line, the phone
alerts you by sending a signal to the
handset’s earpiece.
TALK button
REDIAL(RE/PA)
Press the TALK button, then press the RE/
PA (redial/pause) button to redial the last
number you called (up to 32 digits).
LINE
1
LINE
2
RECEIVING A CALL
To answer a call when the handset is out
of the base, you must press TALK or the
LINE 1 or LINE 2 button.
CHAN
HOLD
TALK
LINE
1
LINE
2
2
5
8
0
ABC
JKL
DEF
1
4
3
MNO
GHI
6
9
#
PQRS
TUV
WXYZ
FLASH BUTTON
7
OPER
TONE
Use the FLASH button to activate custom
calling services such as call waiting or call
transfer, which are available through your
local phone company.
*
RE/PA
MEM
MUTE
ON OFF–RING
FLASH
CONF
PWR–ON OFF
CONF/MUTE
BAT LOW
TIP: If you press the TALK button to
activate custom calling services such as
call waiting, you’ll hang up the phone.
Press FLASH instead.
FLASH button
RE/PA
(redial/pause)
button
9
Download from Www.Somanuals.com. All Manuals Search And Download.
VOL (VOLUME) SWITCH
Controls the volume of the handset's
earpiece.
VOL switch (on the side
of the handset)
RING/PWR ( RINGER AND POWER)
SWITCH
This is a 3-position switch that controls
the ringer and handset power.
When you move the switch to the left, the
power is on and the ringer is on.
When you move the switch to the middle
position, the power is on, but the ringer is
off.
When you move the switch to the far
right, the power is off and the ringer is off
which saves battery power. You must turn
PWR to ON (by sliding the switch to the
middle or left position) in order to make
calls or receive calls.
LINE
1
LINE
2
CHAN
HOLD
TALK
LINE
1
LINE
2
2
5
8
0
ABC
JKL
DEF
1
4
3
MNO
GHI
6
9
#
PQRS
TUV
WXYZ
7
OPER
TONE
*
RE/PA
MEM
MUTE
ON OFF–RING
FLASH
CONF
PWR–ON OFF
CONF/MUTE
BAT LOW
RING/PWR switch
CONF/MUTE/BAT
LOW indicator light
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MUTE BUTTON
Use the MUTE button to interrupt a
phone conversation to talk privately with
someone else in the room.
1. Press MUTE to activate mute feature.
2. Press MUTE again to turn it off.
TEMPORARY TONE
This feature enables pulse (rotary)
service phone users to access touch-tone
services offered by banks, credit card
companies, etc., by pressing the TONE
button to temporarily make the phone
touch-tone compatible. To get
LINE
1
LINE
2
CHAN
HOLD
TALK
information about your bank account, for
example, you would:
LINE
1
LINE
2
2
5
8
0
ABC
JKL
DEF
1
4
3
1. Press the TALK button.
MNO
GHI
6
9
#
2. Call the bank’s information line.
PQRS
TUV
WXYZ
7
3. Press the TONE button after your call
is answered.
OPER
TONE
*
RE/PA
MEM
MUTE
4. Follow the voice instructions to
complete your transaction.
ON OFF–RING
FLASH
CONF
PWR–ON OFF
CONF/MUTE
BAT LOW
5. Hang up when finished. The phone
returns to pulse (rotary) service.
TONE button
MUTE button
CONF/MUTE/BAT
LOW indicator light
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HOLD button
HOLD BUTTON
You can use the HOLD button to interrupt a
phone conversation without hanging up.
1. Press HOLD to place the party on hold.
2. Press HOLD again to resume the
conversation.
CONFERENCE BUTTON
You can use the conference call feature
when you have callers on both lines and
want to have a three-way conversation.
LINE
1
LINE
2
CHAN
HOLD
TALK
LINE
1
LINE
2
2
5
8
0
1. Press HOLD to place the party on hold.
2. Press the other LINE button.
ABC
JKL
DEF
1
4
3
MNO
GHI
6
9
#
3. Dial the number of the second party.
4. Press the CONF button.
PQRS
TUV
WXYZ
7
OPER
TONE
*
5. Press LINE 1 or LINE 2 when finished
to talk privately and disconnect the
other line.
RE/PA
MEM
MUTE
ON OFF–RING
FLASH
CONF
CONF
button
PWR–ON OFF
CONF/MUTE
BAT LOW
6. Press LINE 1 or LINE 2 for whichever
line you are talking on or place the
handset in the base to hang up.
LINE 1
LINE 2
PAGING THE HANDSET
CHARGE/
PAGE
Press the PAGE button on the base or to
locate a misplaced handset. When you
press the PAGE button, the handset
beeps. Press the TALK button when you
locate the handset. Remember that the
ringer must be ON in order for the
handset to ring.
PAGE
button
PAGE
12
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED FEATURES
CHAN button
CHANNEL BUTTON (CHAN)
If you ever experience any interference or
don’t have clear voice quality, press the
CHAN button on the handset to advance
to another channel.
THE MEMORY FEATURE
Store up to 10 numbers in memory for
quick dialing.
LINE
1
LINE
2
STORING A NUMBER IN MEMORY
CHAN
HOLD
TALK
The phone must be off (PWR button
on, but no dial tone) when you store
numbers.
LINE
1
LINE
2
2
5
8
0
ABC
JKL
DEF
1
4
3
MNO
GHI
6
9
#
1. Press the MEM button
2. Dial the number (up to 24 digits).
3. Press MEM.
PQRS
TUV
WXYZ
7
OPER
TONE
*
RE/PA
MEM
MUTE
4. Press any number key (0-9) to store
the phone number in that memory
location.
ON OFF–RING
FLASH
CONF
PWR–ON OFF
CONF/MUTE
BAT LOW
MEM button
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING A STORED NUMBER
Use the same procedure to change a stored number as you do to store a
number— you’re just moving the phone number to a different memory
location.
STORING A REDIAL NUMBER
1. Press MEM.
2. Press RE/PA (redial/pause).
3. Press MEM.
4. Press any number key (0-9) to store the phone number in that memory
location.
STORING A PAUSE IN MEMORY
Use the RE/PA button to insert a pause when a delay is needed in the
dialing sequence (for example, when you must dial a 9 to get an outside
line or when you must enter codes to access your bank’s information line).
If you need to dial 9 to get an outside line and want to store a number in
memory without having to dial 9 each time, you would:
1. Press MEM.
2. Press 9.
3. Press RE/PA (redial/pause).
4. Dial the phone number you want to store in memory.
5. Press MEM.
6. Press any number key (0-9) to store the phone number in that memory
location.
TIP: If you need a longer pause, press RE/PA button more times.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DIALING A STORED NUMBER
1. Press the TALK button to get a dial tone.
2. Press MEM and then press the number for that memory location.
CHAIN DIALING FROM MEMORY
Use this feature to make calls which require a sequence of numbers, for
instance if you use a calling card for a frequently called long distance
number. Basically, you dial each part of the sequence from memory. The
following example shows how you can use chain dialing to make a call
through a long distance service:
The Number For
Memory Location
Long distance access number
Authorization code
Frequently called long distance number
7
8
9
1. Press the TALK button to get a dial tone.
2. Press the MEM button and then press 7.
3. When you hear the access tone, press MEM and then press 8.
4. At the next access tone, press MEM and then 9.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING A HEADSET
TO THE HANDSET
Headset plug (2.5mm)
For hands free conversation, a headset
(not included) can be connected to the
HEADSET jack as shown. The handset
receiver and microphone are disabled
when the headset is connected.
•
Press the TALK button or the LINE 1
or LINE 2 button to answer or place
a call before using the headset.
Refer to the headset manual for
more details.
Headset jack
HDASET
NOTE: The HEAD-
SET jack is compatible
with 2.5 mm headset
plugs only.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING THE BELT CLIP
There are two slots, one on each side of
the handset.
•
Attach the belt clip (not included) by
inserting the sides of the belt clip into
the slots. Snap the ends of the belt clip
into place.
Slot for
belt clip
Slot for
belt clip
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE BATTERY
Make sure phone is OFF before you
replace battery.
1. Remove the battery compartment door.
2. Disconnect the cord attached to the
battery pack and remove the battery
pack from the handset.
3. Insert the new battery pack and connect
the cord into the jack inside the handset.
4. Put the battery compartment door back
on.
5. If you don’t charge the handset
battery properly (for 12 hours)
when you first set up the phone
and/or when you install a new
battery pack, the battery’s long-
term performance will be compro-
mised.
BATTERY SAFETY PRECAUTIONS
•
Don’t disassemble, mutilate, puncture, wet, or dispose of battery in fire.
Like other batteries of this type, if it is burned or punctured, it could
release toxic materials which can cause injury.
•
Keep batteries out of the reach of children.
NOTE: The RBRC seal on the battery used in your Thomson
Consumer Electronics product indicates that we are participating in
a program to collect and recycle Nickel Cadmium batteries
throughout the United States of America. Please call 1-800-8-
BATTERY for information or contact your local recycling center.
Ni-Cd
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
In case of difficulty, please check the following Troubleshooting Guide
before seeking service.
Problem
Solution
No dial tone
• Check installation:
— Is the base power cord connected to a working outlet?
— Is TALK light on?
— Is the telephone line cord connected to the base unit and
the wall jack?
— Is a headset connected to the handset? The handset
receiver and microphone are temporarily disabled when
you connect the headset
• Disconnect the base from the wall jack and connect another
phone to the same jack. If there is no dial tone in the second
phone, the problem might be your wiring or local service.
• Is the handset out of the base unit’s range?Move closer to the
base unit.
• Make sure the battery is properly charged (12 hours).
• Is the battery pack installed correctly? See page 18.
• If the phone still does not work, disconnect the power cord
and remove the battery pack. Then reconnect the power cord
and reinstall the battery pack. Place handset in the base for
10 seconds to allow it to reinitialize.
• Make sure RING/PWR switch on the handset is turned on.
Dial tone is OK, but
can’t dial out
• Make sure the T/P switch on the base is set
correctly (see pp. 4-7).
Handset does not ring
• Make sure the RING/PWR switch on the handset is turned to
ON (the far left position).
• You may have too many extension phones on your line. Try
unplugging some phones.
• See solutions for “No dial tone.”
Cannot hear phone
conversation
• Set the volume control on side of handset to HI.
You experience static,
noise, or fading in
and out
• Change channels.
• Is handset out of range? Move closer to the base.
• Does the base need to be relocated?
• Charge handset battery.
• Make sure base is not plugged into an outlet with another
household appliance.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE (CONTINUED)
Problem
Solution
Cannot hear the
Page alert tone
• Set the RING/PWR switch on the handset to ON (the far left
position).
Range is shorter
than normal
• Press the CHAN button during the conversation to select a
new channel.
• Position the base antenna upward.
Battery will not hold a
charge OR is fully charged
and the BAT LOW lights
• Be sure you are sufficiently charging the battery. When the
battery has been charged for 12 hours, you can expect
approximately 4 hours of talk time.
• Check to be sure battery contacts on both the handset and
the base are making contact and are clean; free of dirt or lint.
• When the handset is placed in the base, check that the base
CHARGE light is on.
BAT LOW light stays on
• Place handset in base for 10 seconds to reset the phone. If
that doesn’t work, charge battery for 12 hours.
Memory Dialing
doesn’t work
• Did you program the memory location keys correctly?
See p. 12.
• Did you follow proper dialing sequence? See pp. 13-15.
• Make sure T/P switch is correctly set.
See pp. 4-7.
Unit locks up
• If the unit doesn’t work, reset the unit by disconnecting and
reconnecting the handset battery and then return the handset
to the base.
• If a power outage occurs while the handset is away from the
base, the handset must be returned to the base when the
power returns.
While using the headset,
you can’t hear the caller
• Make sure the headset is plugged into the handset. When
you plug in the headset, the handset receiver and micro-
and the caller can’t hear you. phone are disabled.
• Unplug the headset if you want to
use the handset instead.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL PRODUCT CARE
To keep your telephone working and looking good, follow
these guidelines:
•
Avoid putting the phone near heating appliances and devices that
generate electrical noise (for example, motors or fluorescent lamps).
DO NOT expose to direct sunlight or moisture.
Avoid dropping the handset, as well as other rough treatment to
the phone.
•
•
•
•
Clean the phone with a soft cloth.
Never use a strong cleaning agent or abrasive powder because this will
damage the finish.
•
•
Retain the original packaging in case you need to ship the phone at a
later date.
Periodically clean the charge contacts on the handset and base with a
eraser.
CAUSES OF POOR RECEPTION
•
•
•
•
Aluminum siding.
Foil backing on insulation.
Heating ducts and other metal construction can shield radio signals.
You’re too close to appliances such as microwaves, stoves,
computers, etc.
•
•
•
•
•
•
Atmospheric conditions, such as strong storms.
Base is installed in the basement or lower floor of the house.
Base is plugged into an AC outlet with other electronic devices.
Baby monitor is using the same frequency.
Handset battery is low.
You’re out of range of the base.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE
The FCC requires this product to be serviced only by the manufacturer or
its authorized service agents. In accordance with FCC requirements,
changes or modifications not expressly approved by Thomson Consumer
Electronics could void the user’s authority to operate this product. For
instructions on how to obtain service, refer to the warranty included in this
guide or call customer service at 1-800-448-0329.
Attach your sales receipt to the booklet for future reference or jot down the
date this product was purchased or received as a gift. This information will
be valuable if service should be required during the warranty period.
Purchase date _____________
Name of store ________________
22
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
A
M
Accessory Order Form 23
Making a call 8
MEM button 13, 14, 15
Memory feature 13
Memory location 13
B
Battery
installation 18
Battery safety 18
Buttons
P
CHAN 13
PAGE button 12
Paging the handset 11
Poor reception 21
Product care 21
FLASH 9
MEM 13, 14, 15
MUTE 11
PAGE 12
PWR–ON OFF 10
RE/ PA 9
RING – OFF ON 10
TONE 11
R
Receiving a call 9
RE/PA (redial/pause) 9
Ring switch 4, 5, 6, 7
C
Chain dialing 15
S
Changing a stored number 14
CHAN (channel) button 13
CHARGE/PAGE light 4, 5, 6, 7
Cleaning the phone 21
Service 21
Storing a number in memory 13
Storing a redial number 14
T
D
Temporary tone 11
TONE button 11
Troubleshooting Guide 19
Dialing a stored number 15
F
FLASH button 9
V
VOL Button 10
I
Installation 3, 4, 5, 6, 7
W
Wall Mount Installation 6, 7
25
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
What your warranty covers:
•
Any defect in materials or workmanship.
For how long after your purchase:
•
One year.
(The warranty period for rental units begins with the first rental or 45 days from date of shipment to the
rental firm, whichever comes first.)
What we will do:
•
•
Provide you with a new or, at our option, a refurbished unit.
The exchange unit is under warranty for the remainder of the original product’s warranty period.
How to make a warranty claim:
•
Properly pack your unit. Include any cables, etc., which were originally provided with the product. We
recommend using the original carton and packing materials.
•
Include in the package evidence of purchase date such as the bill of sale. Also print your name and address
and a description of the defect. Send standard UPS or its equivalent to:
Thomson Consumer Electronics, Inc.
Product Exchange Center
32 Spur Drive
El Paso, Texas 79906
•
•
•
Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
Insure your shipment in case of loss or damage. Thomson accepts no liability in case of damage or loss.
A new or refurbished unit will be shipped to you prepaid freight.
What your warranty does not cover:
•
Customer instruction. (Your Owner’s Manual provides information regarding operating instructions and
user controls. For additional information, ask your dealer.)
•
•
•
•
•
•
Installation and set-up service adjustments.
Batteries.
Damage from misuse or neglect.
Products which have been modified or incorporated into other products.
Products purchased or serviced outside the USA.
Acts of God, such as but not limited to lightning damage.
Product Registration:
•
Please complete and mail the Product Registration Card packed with your unit. It will make it easier to
contact you should it ever be necessary. The return of the card is not required for warranty coverage.
How state law relates to this warranty:
This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
If you purchased your product outside the USA:
This warranty does not apply. Contact your dealer for warranty information.
•
•
© 1997 Thomson Consumer Electronics, Inc.
P.O. BOX 1976, Indianapolis, IN 46206
Trademark(s) ® Registered
Model 2-9925
20807550 (Rev. 1 E/S)
97-28
Marca(s) Registrada(s)
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|