M2 0 3 0 3 BL
USER’S
GUIDE
It is important to read this manual before
operating this unit for thefirst time.
TOCOM 15078070
C O LO R T V
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Important Information
Warning
_______________________________________________________________________
i
Quick Guide to Your TV
Startup
____________________________________________________________________
2-3
Hook up your TV, Plug in the TV, Put Batteries in the Remote,
Turn on the TV, Place Channels in Memory, Set the Time
Menu Basics
______________________________________________________________
4
Colors, Menu Buttons, Moving through the Menus
Using Your TV and Remote Remote Buttons
_________________________________________________________
___________________________________________________
5
6
Front Panel Buttons
Adjusting Your TV
Overall Picture
Picture Settings
__________________________________________________________
__________________________________________________________
7
8
Color, Tint, Brightness, Sharpness, Autocolor, Picture Reset
Using Advanced Features Placing Channels in Memory/ Autoprogram
______________
9
10
11
12
13
13
14
Naming the Channels
_________________________________________________
Setting the Sleep Timer
_____________________________________________
Setting the Alarm Clock
Selecting the Language
___________________________________________
____________________________________________
Watching Closed Captioning
Setting Your TV for Antenna or Cable
____________________________________
_______________________
References
Displays on the Screen
Trouble Checks
Caring for Your TV_____________________________________________________ 17
_____________________________________________
15
____________________________________________________
16-17
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Guide to Your TV
Startup
The steps below will get your TV connected and ready for watching.
For more details, see the page numbers listed.
Match Your Type of Antenna or Cable
Hook up your antenna or cable to
the TV before you follow the steps
below.
1. Hook up your TV
It is important to use only
VHF & UHF VHF & UHF
VHF UHF
VHF UHF
the adapters specified as
they incorporate special
isolation circuitry to meet
safety regulations.
OR
OR
OR
Adapters
CABLE /
ANTENNA
Back of TV
CAUTION: If you choose to use a stand with your TV, take precautions that the stand or furniture the TV is
placed on is properly located and of adequate size and strength to prevent the TV from accidentally being
tipped over or pulled off. This could cause damage to the TV and or personal injury.
Plug the cord into the outlet,
matching the wide and the small
2. Plug in the TV
end of the plug with the outlet.
A. Pull off the cover of the battery
3. Put Batteries in the Remote
compartment.
B. Place the two AAA batteries as
shown, matching the + and –
end of each battery in the
compartment.
C. Replace the cover.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Guide to Your TV
Startup
POWER
DISPLAY
Press POWER on the remote.
4. Turn on the TV
MUTE
PREV CH
VOL CHAN VOL
CHAN
CLEAR MENU RESET
1
4
7
2
5
8
0
3
6
9
INPUT
SKIP
OR
Press POWER on the TV.
–
VOL
+
MENU CH
CH
VOL POWER
A. Press MENU until the Setup
menu is selected. This menu is
white.
5. Place all available
channels in memory
(Autoprogram)
13
B. Press CHANNEL down to
Details for adding and deleting
channels are on page 9.
Controls Alarm Adjust Setup
English Français Español
Autoprogram
highlight Autoprogram.
C. Press + to place channels in the
Label: 00
Clear
TV’s memory (Autoprogram).
Channel Memory: 13 Stored
Cable/Air: Cable
D. Wait until TV has cycled
through all the channels and
returns to the original channel.
A. Press MENU until the Alarm
menu is selected. This menu is
green.
6. Set the Time
12:21 AM
13
B. The Clock is automatically
highlighted the first time you
set it. If it is not, press
Controls Alarm Adjust Setup
Alarm: Off
Alarm Channel: 07
On Time: Disabled
Off Time: Disabled
Clock: Use –/+ to set time.
CHANNEL down to highlight it.
C. Press – to set the hour.
D. Press + to set the minutes.
E. Press CLEAR to remove the
menu from the screen.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Guide to Your TV
Menu Basics
General information about using the on-screen menu system is shown
below. Details on using the remote buttons are on page 5. Many menu items are
explained in detail in Adjusting Your TV starting on page 7 and Using the
Advanced Features starting on page 9.
Yellow Green Light White
Blue
Press MENU repeatedly to see
each of the four menu colors.
Colors
Each menu has a different color
background as shown at the left.
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Label: 00
Clear
Channel Memory: 13 Stored
Cable/Air: Cable
Menu Buttons
These buttons are used with the
TV’s menus to adjust the features.
POWER
DISPLAY
MUTE
PREV CH
VOL CHAN VOL
CHAN
CLEAR MENU RESET
1
4
7
2
5
8
0
3
6
9
INPUT
SKIP
–
VOL
+
VOL
MENU CH
CH
1. Press MENU to move from
Moving through the Menus
menu to menu.
2. Press CHANNEL up and down
to move up and down through
the features in the menu.
Controls Alarm Adjust Setup
English Français Español
Autoprogram
3. Press VOLUME + and – to
move left and right on the
menu lines.
Label: 00
Clear
Channel Memory: 13 Stored
Cable/Air: Cable
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your TV and Remote
Remote Buttons
MENU
DISPLAY
Shows menus on the screen and
moves from menu to menu.
Shows displays on the screen.
Clears menus from the screen.
POWER
DISPLAY
RESET
Returns the picture adjustments to
the original settings.
POWER
Turns the TV on and off.
MUTE
PREV CH
VOL
Number Buttons
Selects any channel number.
MUTE
Two numbers must be pressed for
each channel. Press 0 and 6 for
channel 6.
Switches the TV sound on or off.
CHAN
CHAN
VOL
PREV CH (Previous Channel)
Changes back and forth between
two channels.
For three digit channels, press and
hold 1 until 1-- appears on the
screen. Then press the other two
numbers.
Select a channel and then select
another. Press PREV CH to switch
between the two channels.
CLEAR MENU RESET
INPUT
1
4
7
2
5
8
0
3
6
9
Switches the TV to channel 03.
This is useful if you have a VCR
connected to your TV.
CHAN and
(Channel up and down)
Scans up and down through
channels in the TV’s memory.
SKIP (Commercial Skip)
Allows you to look at other
channels during commercials.
Moves up and down menus. See
Menu Basics on page 4.
Each press adds 30 seconds. Use
the CHANNEL or number buttons
to scan the other channels. TV
switches back to original channel
when time runs out. Press CLEAR
to cancel SKIP.
INPUT
SKIP
VOL + and –
(Volume up and down)
Raises and lowers sound.
Moves left and right on a menu
line. See Menu Basics on page 4.
Changes a feature setting.
CLEAR
Clears menus and displays from
the screen.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Your TV and Remote
Front Panel Buttons
For details on using buttons with menus, see Menu Basics on page 4.
–
VOL
+
MENU CH
CH
VOL POWER
MENU
Shows menus on screen.
Moves from menu to menu.
Channel up and down.
CH and
Scans up and down through channels in the TV’s memory.
Moves up and down menus.
VOL + and –
Volume up and down
Raises and lowers sound.
Moves left and right on a menu line.
Changes a feature setting.
POWER
Turns the TV on or off.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your TV
Overall Picture
Follow the steps below to lighten or darken the overall picture without
changing the color levels.
Press MENU to select the Controls
menu. This menu is yellow.
1. Select the Controls Menu
Controls Alarm Adjust Setup
Sleep Timer: -:--
Closed Captioning: Off
Picture -.....I.....+
Press CHANNEL down to
highlight Picture.
2. Highlight Picture
Controls Alarm Adjust Setup
Sleep Timer: -:--
Closed Captioning: Off
Picture -.....I
.....+
3. Use VOLUME + and – to
Press + to lighten the picture.
OR
adjust the Picture
Press – to darken the picture.
Press CLEAR to remove the menu
from the screen when you are fin-
ished.
Picture -.......I...+
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting Your TV
Picture Settings
Follow the steps below to change the picture on the screen to your
personal setting. The chart below explains your options.
Press MENU repeatedly to select the
Adjust menu. This menu is light
blue.
1. Select the Adjust Menu
Controls Alarm Adjust Setup
Color
Tint
Bright
Sharp
Autocolor: On
Picture Reset
-.....I
G.....I
-.....I
-.....I
.....+
.....R
.....+
.....+
2. Highlight item to change
Press CHANNEL down to
highlight the picture item you
want to adjust.
Press + or – to adjust each item.
3. Use VOLUME + or – to
adjust each item
Controls Alarm Adjust Setup
Color
Tint
Bright
Sharp
-.....I
G.....I
-.....I
-.....I
.....+
.....R
.....+
.....+
Press CLEAR to remove the menu
from the screen when you are fin-
ished.
Autocolor: On
Picture Reset
Press VOLUME + to:
Press VOLUME – to:
Color
Increase color richness
Lower color to black and white
Give green tint to skin color
Tint
Give red tint to skin color
Bright (Brightness)
Add more light to dark parts of
the picture
Add more dark to light parts of
the picture
Sharp (Sharpness)
Autocolor
Show cleaner, clearer images
Make picture more smooth
Turn on to keep Color and Tint in
proper balance each time you
change channels
Turn off for manual adjustment
of Color and Tint
Picture Reset
Reset the picture back to the
original settings
Reset the picture back to the
original settings
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Advanced Features
Placing Channels in Memory (Autoprogramming)
Only channels 2–13 appear in the TV’s memory when you first turn it on.
The channels available in your area must be programmed into the TV's
memory when you hook up your TV. Using CHANNEL up or down
allows you to scan through these channels.
You may want to add or delete a few channels if some stations have weak
signals or were off the air when the TV was programmed. Refer to the Add
or Delete Channels section below.
A. Hook up an antenna, cable or
components before you begin
these steps or you will not be
able to add channels into
memory.
1. Place channels in
13
memory (Autoprogram)
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Label: 00
B. Press MENU repeatedly to
select the Setup Menu. This
menu is white.
Clear
Channel Memory: 13 Stored
Cable/Air: Cable
C. Press CHANNEL down to
highlight Autoprogram.
15
D. Press + to start the TV adding
all active channels into
memory.
Controls Alarm Adjust Setup
English Français Español
Autoprogramming
E. Wait until the TV has cycled
through all the channels and
returns to the original channel.
Label: 00
Clear
Channel Memory: 15 Stored
Cable/Air: Cable
F. Press CLEAR to remove the
menu from the screen when
you are finished.
13
A. Press MENU repeatedly to
2. Add or delete channels
select the Setup menu.
B. Press CHANNEL down to
highlight Channel Memory.
Controls Alarm Adjust Setup
English Français Español
Autoprogram
C. Press + to underline the
channel number.
Label: 00
Clear
Channel Memory: 13 Stored
Cable/Air: Cable
D. Select the channel number you
want to add or delete with the
number buttons.
E. Press + to add or delete a
channel (you will see Stored on
the screen when added and
Erased when deleted).
13
Controls Alarm Adjust Setup
English Français Español
Autoprogram
F. Repeat D and E for more
channels.
Label:l 00
Channel Memory: 13 Erased
Cable/Air: Cable
Clear
G. Press CLEAR to remove the
menu from the screen when
you are finished.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Advanced Features
Naming the Channels
You can name at least 20 channels with four characters in each name.
Full appears beside Label when the memory is used up. Fixed appears
when a channel number cannot be named. Below are the characters
that can be used in a name.
A. Press MENU repeatedly to select
12
1. Name a channel
the Setup menu.
B. Press CHANNEL down to
highlight Label.
Controls Alarm Adjust Setup
English Français Español
Autoprogram
C. Press + to underline the channel
number.
Label: 12
Clear
D. Select the channel number with
the number buttons.
Channel Memory: 12 Stored
Cable/Air: Cable
E. Press + to underline the first
character of the name.
F. Choose the character using
XET
12
CHANNEL up or down.
G. Repeat E–F to complete the
name.
Controls Alarm Adjust Setup
English Français Español
Autoprogram
H. Press – to move backward if
you want to change an item.
Label: 12 X E T
Channel Memory: 13 Stored
Cable/Air: Cable
Clear
I. Repeat steps C-G to add other
labels.
12
2. Erase a name
A. Follow A and B above.
B. Press + until clear is underlined.
C. Press CHANNEL up or down to
Controls Alarm Adjust Setup
English Français Español
Autoprogram
clear the name.
Label: 12
Clear
Channel Memory: 13 Stored
Cable/Air: Cable
Character List
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z &
’ ( ) á + , – . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ blank space
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Advanced Features
Setting the Sleep Timer
You can set your TV to turn itself off. If you’re watching TV at night and
fall asleep, the TV will turn off for you.
A. Press MENU to select the
Controls menu and highlight
Sleep Timer. This menu is
yellow.
1. Set Sleep Timer
Controls Alarm Adjust Setup
Sleep Timer: – : ––
Closed Captioning: Off
B. Press + enter the amount of
time you want to watch TV
before it shuts off. Each press
equals 15 minutes.
Picture -.....I
.....+
C. Press – to subtract time from
the sleep timer.
D. Press CLEAR to remove the
menu from the screen when
you are finished.
11:00 PM
13
Sleep
Controls Alarm Adjust Setup
Sleep Timer: 0 : 15
Closed Captioning: Off
Picture -.....I
.....+
A. When 0:01 appears on the
screen, the TV will shut off in
one minute. Press + to add
more time.
2. Add more time
Controls Alarm Adjust Setup
Sleep Timer: 0 : 01
Closed Captioning: Off
B. Press CLEAR to remove the
menu from the screen when
you are finished.
Picture -.....I
.....+
A. Press MENU to select the
Controls menu and highlight
Sleep Timer.
3. Cancel the Timer
B. Press – until the time reaches
Controls Alarm Adjust Setup
Sleep Timer: – : ––
– : – –.
Closed Captioning: Off
C. Press CLEAR to remove the
menu from the screen when
you are finished.
Picture -.....I
.....+
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Advanced Features
Setting the Alarm Clock
The TV can be set to turn on each day like your alarm clock. You can set
it to turn on to your favorite channel at a certain time. You can also set it
to turn itself off again. The Alarm cannot be used until the clock is set.
A. Press MENU to select the Alarm
menu and highlight Alarm.
This menu is green.
1. Turn on the Alarm
12:34 AM
Alarm
13
B. Press + or – to select On or
Controls Alarm Adjust Setup
Alarm: On
Off.
Alarm Channel: 07
On Time: Disabled
Off Time: Disabled
Clock: 12 : 34 AM
A. Press CHANNEL down to
12:34 AM
Alarm
13
2. Set the Alarm Channel
highlight the Alarm Channel.
B. Press + to highlight the
channel number.
Controls Alarm Adjust Setup
Alarm: On
Alarm Channel: 07
On Time: Disabled
Off Time: Disabled
Clock: 12 : 34 AM
C. Select the channel that you
want the TV to turn on to with
the number buttons.
A. Press CHANNEL down to
3. Set On and Off Times
12:34 AM
Alarm
13
highlight the On or Off Time.
B. Press – to set the hour.
C. Press + to set the minutes.
Controls Alarm Adjust Setup
Alarm: On
Alarm Channel: 07
On Time: 7 : 30 AM
Off Time: Disabled
Clock: 12 : 34 AM
D. Press and hold – to choose
Disabled. This turns the TV
only on or only off at a certain
time each day.
E. Press CLEAR to remove the
menu from the screen when
you are finished.
12:34 AM
Alarm
13
Controls Alarm Adjust Setup
Alarm: On
Alarm Channel: 07
On Time: 7 : 30 AM
Off Time: Disabled
Clock: 12 : 34 AM
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Advanced Features
Selecting a Language
The on-screen displays in this TV can be displayed in three languages:
English, French, and Spanish. When you select a language, all the
displays are shown on the screen in your preferred language.
Press MENU repeatedly to select
the Setup menu. This menu is
white.
13
1. Select the Setup Menu
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Channel Memory: 13 Stored
Cable/Air: Cable
13
Press + to underline the language
2. Select Setting
you want to select.
Controls Alarm Adjust Setup
English Français Español
Programación automática
Mem. de canales: 13 almac.
Cable/Aire: Cable
Watching Closed Captioning
Closed captioning displays the audio portion of a program as words on
the TV screen. It is useful for the deaf, hearing impaired, or anyone who
wants to watch a program without sound. If you have turned Closed
Captioning on and it does not appear on the screen, it is not available on
the channel you are watching. Closed captioning is not available on all
programs or at all times. This TV does not support the text mode. Text
information typically consists of program information, weather bulletins,
local activities, etc.
Press MENU to select the Controls
menu. This menu is yellow.
1. Select the Controls Menu
Controls Alarm Adjust Setup
Sleep Timer: – : ––
Closed Captioning: Off
Picture -.....I
.....+
Press CHANNEL down to highlight
Closed Captioning.
2. Highlight Closed
Captioning
Press + or – to select Off, C1, or C2.
Select C1 for the display of the
primary language in your area.
Select C2 for an alternate service
such as a secondary language
translation or simplified English.
Controls Alarm Adjust Setup
Sleep Timer: – : ––
Closed Captioning: Off
3. Select Setting
Picture -.....I
.....+
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Advanced Features
Setting Your TV for Antenna or Cable
Your TV automatically adjusts this feature when the TV places channels
in memory (Autoprogram). Follow the steps below to change the setting
as needed.
Press MENU repeatedly to select
the Setup menu. This menu is
white.
13
1. Select the Setup menu
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Label: 13
Clear
Channel Memory: 13 Stored
Cable/Air: Cable
Press CHANNEL down to
highlight Cable/ Air.
13
2. Highlight Cable/Air
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Label: 13
Clear
Channel Memory: 13 Stored
Cable/Air: Cable
A. Press + or – to select Cable or
Air. Select Cable if you have
cable. Select Air if you have a
home antenna connected to
your TV.
13
3. Select Cable or Air
Controls Alarm Adjust Setup
English Français Español
Autoprogram
B. Press CLEAR to remove the
menu from the screen when
you are finished.
Label: 13
Clear
Channel Memory: 13 Stored
Cable/Air: Air
14
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Displays on the Screen
Your TV shows the settings of several features on the screen. To see what
features have been set on your TV, press DISPLAY on the remote.
12:00 AM
XETU 13
Alarm Sleep
Volume –. . . . . . . I . . . . . . . +
Mute
Screen Display
Description
12:00 AM
Time of the clock. Details are on page 3.
XETU
13
Name you chose to describe the channel. Details are on page 10.
Channel number you are watching.
Alarm
Sleep
Alarm clock is set to turn on or off. Details are on page 12.
Sleep Timer is set to turn off the TV. Details are on page 11.
Sound level of the TV.
Volume
Mute
No sound comes from the TV. MUTE is not displayed when the Closed
Captioning feature is on. See MUTE button on page 5.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Trouble Checks
You may have problems that can be fixed with a few minor adjustments.
Look for the type of problem you are having below and then try the
suggestions to get your TV going again.
Trouble
Power
Checks and Adjustments
TV will not turn on
Plug TV in.
Plug something else into the outlet to make sure it is working.
Make sure batteries in the remote are not dead.
Aim the remote at the TV and press POWER.
Make sure batteries are placed in the remote the right way. See batteries
on page 2.
Unplug TV for a few minutes and then turn it on again.
No picture, no sound but
TV has power
Check antenna connections.
Check position of Cable/ Air feature. See page 14.
Try another channel. Inactive channel may be tuned.
Picture
Blank screen
Try another channel. Inactive channel may be tuned.
Make sure cable or an antenna is connected to the TV correctly.
Picture poor, sound okay
Check antenna connections.
Adjust TV picture. See pages 7- 8.
Closed Captioning
No closed captioning
Turn on closed captioning. See page 13.
Make sure the program is being broadcast with closed captioning (CC).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Trouble Checks
Checks and Adjustments
Trouble
TV Turns on or off
Turns off by itself
Check Sleep Timer. See sleep timer on page 11.
Wait 30 seconds and turn on again, a power surge may have occurred.
Check Alarm Off time. See alarm clock on page 12.
Turns on by itself
Check Alarm On Time. See alarm clock on page 12.
Check clock time. See clock on page 3.
Does not turn off at
Alarm Time
Make sure Alarm is turned on. See alarm clock on page 12.
Check clock time. See clock on page 3.
Make sure Clock time is set correctly, including AM and PM.
Check Alarm Off time.
Remote
Works part or none of the
time
Clear the path between the remote and TV of any objects.
Aim the remote at the component you are trying to control.
Make sure batteries in the remote are not dead.
See if batteries are placed in remote correctly. See batteries, page 2.
Press number buttons. Channel may not be in memory. See Autoprogram
Can’t select certain channel
on page 9.
For numbers over 100, press and hold 1 until 1-- appears, then press the
other two numbers.
Set Cable/ Air feature to Cable for channels higher than 69. See page 14.
Remove batteries and hold down one or more buttons for several seconds
to drain the microprocessor inside the remote and reset it. Re-install the
batteries and try remote again.
Remote lockup
Caring for Your TV
®
To clean your TV cabinet, we recommend Murphy’s Oil Soap. You should not use cleaners such as
®
®
®
Windex with vinegar, Lenox Furniture Polish spray or Heinz Cleaning Vinegar to clean your TV
cabinet. Using these cleaners will permanently mar the surface of the cabinet.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPORTED BY:
10330 North Meridian Street
Indianapolis, IN 46290-1024
100%
RECYCLEDPAPER
©1995 Thomson Consumer Electronics, Inc.
Trademark(s)® Registered
Marca(s) Registrada(s)
MINIMUM50%POSTCONSUMER
Printed in the U.S.A.
TOCOM 15078070
COUNTRY OF ORIGIN:
CANADA
Download from Www.Somanuals.com. All Manuals Search And Download.
|