PYLE Audio TV Mount PSW129MT User Guide

INSTALLATION GUIDE  
Item No.:PSW129MT  
Thank you for choosing our product  
Pyle Audio  
1600 63rd st , Brooklyn, NY, 11204  
(718)236-8000  
TV Size Range: 32"~50"  
Maximum Weight Capacity: 50kg/110lbs  
Adjustable angle: 0°5°  
Warning  
Locked by locking bar on the bottom  
This product contains small items that could be a choking hazard if swallowed. Keep  
these items away from young children!  
www.pyleaudio.com  
1.Make sure these instructions are read and completely understood before attempting  
installation. If you are unsure of any part of this installation, contact a professional  
installer for assistance.  
MADE IN CHINA  
CAUTION  
2.The wall or mounting surface must be capable of supporting the combined weight of  
the mount and the display; otherwise the structure must be reinforced.  
3.Safety gear and proper tools must be used. A minimum of two people are required  
for this installation. Failure to use safety gear can result in property damage, serious  
injury or death.  
This product was designed to be installed on wood stud walls and solid concrete walls.  
Before installing make sure the supporting surface will support the combined load of the  
equipment and hardware. Never exceed the Maximum Load Capacity. This product is  
intended for indoor use only. Use of this product outdoors could lead to product failure or  
personal injury.  
-8-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part 3-MMountinng the flat panel screen  
Part 1aa-Wood SStud Moouunting  
Hook the top of brackets(2) onto the top flange  
of wall plate(1). Then swing the screen down.  
Use wall plate(1) as a template, make sure it is level, and mark four mounting  
holes along the center lines of the wood studs. Drill four 3/16(5mm)dia.  
holes 2(50mm) deep. Level wall plate(1) and attach to wall with four long  
bolts(G) and four washers(I). Tighten screws firmly. Do not overtighten.  
1
NOTE: Always use an assistant or mechanical  
lifting equipment to safely lift and position  
heavy equipment.  
2
Use the Locking bar(3) to prevent the TV from being removed or  
accidentally knocked off of the wall plate.When the locking bar half  
insertes into the wall plate , you can use the rotating rod(4) to make it  
fully inserted.  
Stud finder  
Wood stud  
3
I
2(50mm)  
G
5
Φ3/16(5mm)  
-3-  
-6-  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part 2aa-Attaacching Brracketts To Scrreen Wiith Flaat Back  
Part 1b--Concrette Wall MMoounting  
Center brackets vertically on back of screen. Select the small(A or B),  
medium(C or D) or large(E) screws. Attach brackets to screen using four  
selected screws and four square washers(F) at the top and bottom of each  
bracket. Tighten screws firmly. Do not overtighten.  
Level wall plate(1) and use wall as a template to mark four holes. Drill four  
3/8(10mm) dia. holes 2(50mm) deep. Insert four anchors(H) into holes and  
secure wall plate with four long bolts(G) and four washers(I).Tighten screws  
firmly. Do not overtighten.  
Square washer(F)  
F
2(50mm)  
Large hole for  
M8 screws  
A-E  
Φ3/8(10mm)  
Medium hole for  
M5 and M6 screws  
Small hole for  
M4 screws  
Concrete Wall  
H
I
G
-5-  
-4-  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RCA Flat Panel Television 37LA30RQ User Guide
Reliable Sewing Machine MSK 441 User Guide
Revox Speaker Digital LS User Guide
RIDGID Saw R3121 User Guide
Rotel Stereo System RT 222 User Guide
Samson Stereo Amplifier PA324 User Guide
Samsung Flat Panel Television LC750 QSG User Guide
Sanyo Air Conditioner 000 31 User Guide
SATO All in One Printer GL 4xxe User Guide
Sennheiser Headphones EZX 80 User Guide