ple730r
ple520p
o w n e r ’ s m a n u a l
equalizer with subwoofer crossover
Download from Www.Somanuals.com. All Manuals Search And Download.
owner’s manual
table of contents
Ple520p
i
congratulations
table of contents
general features
specifications
1
2
3
features and controls
Ple730r
4-5
6-7
Ple520p
8
mounting and installation
electrical connections
system wiring
9
10-11
12
precautions and troubleshooting
1
Download from Www.Somanuals.com. All Manuals Search And Download.
general features
ple730r
ple520p
7 band graphic equalizer
pre-amp input via RCA jacks
output level control
LED power level meter
12 dB boost/cut
subwoofer frequency control
subwoofer boost control
front and rear fader control
6 channels RCA outputs
night illumination
remote power on/off
high impedance output
half-DIN size cabinet
ple730r
5 band graphic equalizer
ple520p
5 band parametric controls
20 frequency band selectors
pre-amp line & aux input
via RCA jacks
output volume control
input gain adjustments
frequency gain control
rotary fader
rotary band control
defeat switch
6 channels RCA outputs
remote power on/off
2
Download from Www.Somanuals.com. All Manuals Search And Download.
owner’s manual
specifications
ple730r
ple520p
ple730r ple520p
7-Band Equalizer
5-Band Equalizer
center frequencies 65 Hz · 150 Hz
400 Hz · 1.4 KHz
sub band
25 · 50 · 65 · 80 Hz
low band
15 0 · 200 · 260 · 300 Hz
low mid band
2.4 KHz · 6 KHz
15 KHz
600 · 800 · 1000 · 1200 Hz
high mid band
2.1 · 2.8 · 3.5 · 4.2 KHz
high band
7 · 9.5 · 12 · 15 KHz
15 Hz - 30 KHz (+/– 1 dB)
frequency response
400 mV
200 mV
input level
(for 400mV output)
total harmonic distortion (THD)
(at 400mV output)
< 0.03%
10K Ohms
90 dB
output impedance
signal-to-noise ratio (S/N)
separation
50 dB
450 mA
current drain
12V DC Neg. Ground
power supply voltage
dimensions (W x H x L)
mm
inches
190 x 29 x 140
7 x 1.1 x 5.5
3
Download from Www.Somanuals.com. All Manuals Search And Download.
features and controls
ple730r
aux input switch
LED level display
fader/volume control
power indicator LED
front
left output level
power
right output level
aux
front
fader
rear
def
65Hz
150Hz 400Hz 1.4KHz 2.4KHz 6KHz 15KHz 40 400
0
+18dB min max
subwoofer
volume ple730r
series
defeat switch
equalizer controls
subwoofer subwoofer
frequency boost
control control
rear
OUTPUT
rear
INPUT
sub
front
line
aux
L
R
L
R
L
R
L
R
L
R
sub channel rear channel front channel
outputs outputs outputs
stereo
inputs
auxiliary
inputs
4
Download from Www.Somanuals.com. All Manuals Search And Download.
owner’s manual
features
aux input switch the switch selects the aux or line inputs.
LED level display these rows of LEDs display the Preamp Output Levels. Left
and right channels are displayed independently at peak levels.
power indicator LED this LED is illuminated when the unit is properly powered,
grounded and the remote power has been turned on.
fader control • in a 2 Amplifier, 4 Speaker system, rotating the knob to the
FRONT side increases the level of the front speakers; rotating
to the REAR side increase level of the rear speakers. At mid
position, both sets of speakers are at maximum level.
• in a 2 Speaker system, the fader control should be rotated
to the position which provides highest levels for both sets of
speakers.
volume control allows adjustment of sound level for particular program material
or source.
defeat switch when the “DEF” switch is in the position, the equalizer functions
are bypassed. Depressing the “DEF” switch again will restore
the equalizer’s operation.
equalizer controls this seven-band equalizer gives you control over the output
levels at various frequencies.
subwoofer frequency control lets you adjust the subwoofer frequency and crossover point
from 40-400 Hz.
subwoofer boost control lets you adjust the subwoofer boost level from a 0 to +18 dB
increase.
power connections connect to power source as follows:
+12V: Connect a red wire of at least 12 gauge to the car
battery or other power source.
GROUND: Connect a black wire of at least 12 gauge to car
chassis for ground connection
REMOTE: Connect an orange wire to remote activating (12V
DC) wire of car stereo or other head unit.
subwoofer/rear/front RCA cables are used to connect the subwoofer channel outputs
channel outputs to the subwoofer channel amplifier inputs, the rear channel
outputs to the rear channel amplifier inputs, and the front
channel outputs to the front channel amplifier inputs.
line and auxiliary inputs RCA cables are used to connect your car stereo head unit, CD
player, or other source to either the line or aux inputs.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
features and controls
ple520p
input gain adjustment
aux
line
equalizer center frequency switches
top
25
50
65
80
15 0
200
260
300
600
800
1000
1200
2.1k
2.8k
3.5k
4.2k
7k
9.5k
12 k
15 k
aux input switch
LED level display
fader/volume control
power indicator LED
front
left output level
power
right output level
front
aux
fader
rear
def
sub
low
low mid
hi mid
high
40 400
0
+18dB
min max
volume ple520p
series
subwoofer
defeat switch
equalizer controls
subwoofer subwoofer
frequency boost
control control
rear
OUTPUT
rear
INPUT
sub
front
line
aux
L
R
L
R
L
R
L
R
L
R
sub channel rear channel front channel
outputs outputs outputs
stereo
inputs
auxiliary
inputs
6
Download from Www.Somanuals.com. All Manuals Search And Download.
owner’s manual
features
input gain adjustments allows you to adjust the left and right channel input sensitivity to
match the output level from your line or auxiliary source.
equalizer frequency controls these switches determine the frequencies the equalizer control
knobs on the front panel will affect. Setting a switch on one of the
5 bands on top of the equalizer permits the corresponding control
on the front panel to boost or cut the level.
aux input switch the switch selects the aux or line inputs.
LED level display these rows of LEDs display the Preamp Output Levels. Left and right
channels are displayed independently at peak levels.
power indicator LED this LED is illuminated when the unit is properly powered, grounded
and the remote power has been turned on.
fader control • in a 2 Amplifier, 4 Speaker system, rotating the knob to the FRONT
side increases the level of the front speakers; rotating to the REAR
side increase level of the rear speakers. At mid position, both sets
of speakers are at maximum level.
• in a 2 Speaker system, the fader control should be rotated to the
position which provides highest levels for both sets of speakers.
volume control allows adjustment of sound level for particular program material
or source.
defeat switch when the “DEF” switch is in the position, the equalizer functions
are bypassed. Depressing the “DEF” switch again will restore the
equalizer’s operation.
equalizer controls this seven-band equalizer gives you control over boost or cut at the
frequencies selected by the corresponding center frequency switches
on top of the unit.
subwoofer frequency control lets you adjust the subwoofer frequency and crossover point from
40-400 Hz.
subwoofer boost control lets you adjust the subwoofer boost level from a 0 to +18 dB
increase.
power connections connect to power source as follows:
+12V: Connect a red wire of at least 12 gauge to the car battery
or other power source.
GROUND: Connect a black wire of at least 12 gauge to car chassis
for ground connection
REMOTE: Connect an orange wire to remote activating (12V DC)
wire of car stereo or other head unit.
subwoofer/rear/front RCA cables are used to connect the subwoofer channel outputs to
channel outputs the subwoofer channel amplifier inputs, the rear channel outputs
to the rear channel amplifier inputs, and the front channel outputs
to the front channel amplifier inputs.
line and auxiliary inputs RCA cables are used to connect your car stereo head unit, CD
player, or other source to either the line or aux inputs.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
mounting and installation
ple730r
4 x 6 mm machine screw (4)
ple520p
dashboard
mounting
Please take the time to install your
new Pyle Signal Processor
securely, according to this
diagram, using the hardware
provided.
Signal Processor enclosure
Mounting Bracket
This Half-DIN size unit can also
be installed in the dash adjacent
to the head unit, provided that
there is a slot available.
4 x 12 mm
self-tapping screw (2)
4 mm spring
washer (2)
wiring tips
When making electrical
4 mm plain
washer (2)
connections to your amplifier,
please observe the following:
Connect 12V DC from a constant battery source to a +12V slip-on spade terminal and install
a one (1) amp fuse in line.
Connect the signal processor’s GROUND to a good chassis ground, near where the unit is
mounted, or to the case of the head unit.
Connect the signal processor’s REMOTE TURN-ON lead to the remote turn-on lead out of
the head unit, and install a 1/2 amp fuse in line. (A relay should be used if turning on more
than one component, such as EQ’s, crossovers or amplifiers.)
Connect stereo RCA cables from the head’s left and right front outputs to the left and right
inputs of the signal processor.
Connect stereo RCA cables from the left and right outputs, (and low, mid and high outputs
if applicable), of the signal processor to the left and right inputs of your amplifier(s) or
additional signal processor(s).
Turn the unit on, and adjust the input gain on the signal processor to match the output of
the head unit (1/2, or at center position, is about 1 V). Be careful not to overdrive the input
of your amplifier(s) or signal processor(s).
Adjust each of the crossover or equalizer controls to achieve the desired sound characteristics.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
owner’s manual
electrical connections
ple730r
ple520p
rear
OUTPUT
rear
INPUT
sub
front
line
aux
L
R
L
R
L
R
L
R
L
R
RED WIRE
ORANGE WIRE
to remote
turn-on
+12V
Fuse 1A
Fuse 0.5A
head unit
12V battery
BLACK WIRE
9
Download from Www.Somanuals.com. All Manuals Search And Download.
system wiring
basic system application using
front, rear, and subwoofer amps
ple730r
ple520p
left and right
line outputs
from head unit
left and right
line inputs
OUTPUT
rear
INPUT
aux
sub
front
line
L
R
L
R
L
R
L
R
L
R
+
–
L
FRONT CHANNEL
speakers
+
–
R
FRONT CHANNEL
power amplifier
+
–
L
REAR CHANNEL
speakers
+
–
R
REAR CHANNEL
power amplifier
+
+
L
–
–
SUB CHANNEL
speakers
R
SUB CHANNEL
power amplifier
10
Download from Www.Somanuals.com. All Manuals Search And Download.
owner’s manual
system wiring
basic system application using
a 4 channel amp and subwoofer amp
ple730r
ple520p
left and right
line outputs
from head unit
left and right
line inputs
OUTPUT
rear
INPUT
aux
sub
front
line
L
R
L
R
L
R
L
R
L
R
+
–
+
L/R FRONT
speakers
–
+
L/R REAR
speakers
4 CHANNEL
power amplifier
–
+
–
+
+
L
–
–
SUB CHANNEL
speakers
R
SUB CHANNEL
power amplifier
11
Download from Www.Somanuals.com. All Manuals Search And Download.
precautions
ple730r
• Never drive with the volume raised so high
you cannot hear what is occuring in traffic
around you.
ple520p
• Be aware that repeated exposure to excessive
volume levels can permanently damage your
hearing!
• Keep all electronics away from moisture, dust,
extreme heat or extreme vibrations.
• Pyle Audio products are capable of sound
pressure levels in excess of 150 dB. Continuous
exposure to sound pressure levels over 100 dB
may cause permanent loss of hearing. Use
common sense and PRACTICE SAFE SOUND.
troubleshooting
If you experience...
Signal Processor does not turn on. Check that:
• Remote Turn-On wire has 12V.
• 12V wire has 12V.
• Ground wire is properly connected.
Level of sound is low. Check that:
• Wiring is not loose or cables misconnected/disconnected.
• RCA cables are not faulty.
Background noise is too high. Check that:
• Wiring is not loose or cables misconnected/disconnected.
• RCA cables are not faulty.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
owner’s manual
notes
13
Download from Www.Somanuals.com. All Manuals Search And Download.
l i m i t e d w a r r a n t y p o l i c y
All Pyle products are carefully constructed and thoroughly tested
before shipment. Products purchased in the USA are warranted
to be free of defects in material and workmanship for two (2)
years from the date of purchase. This warranty is limited to the
original retail purchaser.
Should the product fail due to factory defects in material or
workmanship, your unit will be repaired or replaced at the sole
discretion of Pyle.
To obtain warranty service you must first call our Consumer
Return Hotline number at (718) 236-6948 to obtain a Return
Authorization number. This R.A.# must appear on the outside
of your package and on all paperwork relating to your return.
When returning a product to us for warranty service it must
be carefully packed and shipped prepaid to:
R.A.#
Pyle Service Center
1600 63rd Street
Brooklyn, NY 11204
You must also include the following items:
• A copy of your sales receipt or other proof of purchase
• A brief letter indicating the problem you are experiencing
• include in your letter your return address, daytime phone
number, and R.A. number
• also include a check or money order for $12.00 for return
shipping, handling, and insurance, or provide your Visa/MC
number with expiration date.
Our obligation under this warranty is limited to the
repair or replacement of the defective unit when it is
returned to us prepaid. This warranty will be considered
void if the unit was tampered with, improperly serviced,
or subject to misuse, neglect, or accidental damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
|