PLCD95UM
INSTRUCTION MANUAL
PWR
MUTE
MOD
ST
INT
2
RPT
3
/
TOP
1
MO
-10
5
RDM
4
+10
6
LOUD
LOC
DX
ID3
BAND
DISP
MENU
VOL+
SCAN
SEL
ENTER
MENU
APS
SEARCH
MENU
VOL-
REMOTE CONTROL
ANTI-THEFT FLIP DOWN DETACHABLE PANEL
AUTO-LOADING CD/MP3 COMPACT DISC PLAYER
AM/FM DIGITAL PLL TUNING RADIO
WITH ESP FUNCTION &INFRARED REMOTE CONTROLLER
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
1. OPEN BUTTON
Press it to flip down the front panel then you can insert the CD disc into the CD
compartment .
2.VOLUME(MENU)+/-KNOB
Rotate the VOL+/-button to adjust volume level.
IN MENU MODE: Rotate the vol+ /- button also can adjust the selected mode.
IN MP3 MODE: Press search button to select track or file search, and then
press ENTER buttonto enter trackor file searchand using thevol+/- button to
move track or file search upward or downward.
3.SEL/MNU(ENTER) BUTTON
Press SEL button immediately to move display through volume, bass, treble
and balance functions. Use vol+/-buttton to adjust the select mode. When
mode has not been adjusted for several seconds, display returns to normal
radio or cd display.
VOL BAS TRE
BAL FAD
(VOLUME) (BASS) (TREBLE) (BALANCE) (FADER)
Note:
During press SEL button if any one of the EQ mode is turned on, LCD display
only indicate as follows:
VOL BAS FAD
(VOLUME) (BASS)
(FADER)
A. Adjust volume level by using vol+/- button
NOTE: The unit is initially set to volume mode.
B.Press the SEL button to select volume ,bass, treble, balance, fader mode
than use volume+/ - button to adjust the levelof them.
NOTE: The fader function controlsbalance between frontor rear speakers
for four speakers system
C.Press and hold SEL button for one secondto move displaythrough EQ, ESP,
MULT, WOOFER(the woofer function forwoofer version only), and BEEP
functions. When mode has notbeen adjusted forseveral seconds, displayreturn
to normal radio or cd display.and then use vol+/- button to adjust the selected
mode as follows:
FLAT M CLASS M ROCK M POP M DSP OFF
EQ:
ESP ’12
ESP ’45
ESP:
MULT:
MULT ON
MULT OFF
WOOFER OFF
BEEP OFF
WOOFER ON
BEEP ON
WOOFER:
BEEP:
D.IN mp3 playback, Used for enter track and file search during MP3 mode after
press SEARCH buttonduring track search, after selecting thedesired track
with 1 digit or 2 digits, selected song begins to play after enter button is
pressed for longer than 0.5 second. During file search, when enter button is
pressed or longer than 0.5second.at the current directory mode, first song in
the corresponding director will begin playing.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
4.5.TRACK UP /DOWN BUTTONS
A.During RADIO mode, press and hold
auto search channel. Then press
or
for more than 2 seconds you can
,you can have manual search channel.
or
B.During CD mode, Press
previoustrack.Press and hold
or fast reverse. Releasing the button to stop fast playing
C.IN MP3 MODE:Press the or button once to choose the next or previous
or
button to choose the following track or the
or button for several secondsto fast forward
track under normalMP3 playback.
6. MODE BUTTON
Press it repeatedly to select CDP, AUX and RADIO mode in sequence and circulation.
7. LUD
When reduce volume to half level,press it to enhance the bass effect.
8.ST BUTTON
Press ST button to stereo reception for radio stations.
9.EJECT BUTTON
Press it to eject the DISC .
10-11-12-13-14-15. PRESET MEMORY BUTTONS
A. To memorize the current frequency, press any one of the six preset Buttons hold for
more than 2 seconds.
B. To recall the preset memory, press one of the preset buttons [1-6].
C. In CDP mode, press 1TOP button to pause CDP playing, press it again to resume CDP
playing. Long press 1 TOP button to select the first track/chapter to play.
D. In CDP mode, press 2INT button to play the first 10 seconds part of each song, press it
again to stop scanning and retain playing the song currently selected.
E. In CDP mode, press 3RPT button to play the current track repeatedly. Press it again to
cancel this mode.
F. In CDP mode, press 4RDM button to play the track in random order. Press it again to
cancel this mode.
G.In mp3 mode ,press the 5-10/6+10 buttton to select back 10 tracks or next 10 tracks.
16.MUTE BUTTON
Press it to eliminate the sound immediately.
17.DISP BUTTON
Press DSP button immediately to recall time display, then press and hold this button for
three seconds until the time is blinking. And rotate VOL+ button to adjust hour or VOL-
button to adjust minutes.
18.APS/SEARCH BUTTON
IN RADIO MODE:
When short pressing, the radio searches for each preset station.
When the field strength level is more than the threshold level of stop level, the
radio is holding at that preset number for few secretary with releasing mute, and
than searches again. In FM band, FM 1, FM 2 and FM 3 is checked one at a time.
When long pressing (more than 1 second),the radio searches from the current
frequency and checks the signal strength level until 1 cycle search is finished.
And then 6 strongest stations are preset to the corresponding preset number.
The AS operation is implemented in the each band of selected band. When the
AS operation is finished, the radio executes the preset scan.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
IN MP3 MODE:
Press search button for several seconds ,track and file and character search
becomes possible in the new mode.
FOR EXAMPLE:
TRACK SEARCH EXAMPLE
HOW TO SEARCH FOR TRACK NUMBER 132,TITLED " WXY.MP3"
A. Press APS/SEARCH button once to go in to search initial mode, it is now
in TRACK search mode.
B. Press SEL/menu(ENTER) button to select 1st digit " 1" ,then LCD will shows 001
and 1st digit " 1" is selected blinking. If ENTER button is pressed again for more
than 0.5sec,the first song is played.
C. Then rotate VOL+or VOL- button, then 1st digit will increase according to the
number of times key is pressed
D. If LCD shows 002 ,then press ENTER button again the 2nd digit is selected.
LCD will show " 002" ,with middle 0 digit blinking.
E. Then rotate VOL + or VOL- button continuously to select 2nd digit to " 3" i.e.,
" 032" ,with " 3" blinking.
F. Press ENTER button to select 3rd digit ,i.e," 032" ,with 0 blinking
(if ENTER buttons is pressed for longer than 0.5sec.,32th song is played)
G. Rotate VOL+ or VOL - to select 3rd digit to" 1" i.e., " 132" with 1 blinking
H. Finally press ENTER button, than track number " 132" will play immediately.
I. VOL+or VOL- button performs to shift 1st digit and 2nd digit to desired track
(digit) then 3rd digit is shifted form 0-9 as a loop rotation.
FILE SEARCH EXAMPLE
NOTE:
Similar operation as track search, use VOL+ or VOL - button to select directory
and track number, use ENTER button to confirm selection and/or start playback
If the structure of Disc above does MP3 TOC, it is follows
c.MP3
d.MP3
DISC
Total Dir: 4
dir to have MP3 file 3(A,C,D)
We regard dir as MP3 file, when operating it is located
as A A ......
To listen to a song from MP3(On Normal play)
A. APS/SEARCH button input (2 times) - file search mode display
B. SEL/MENU(ENTER) button input -A Dir display
Total Song: 7
A
C
a.MP3
b.MP3
B
D
e.MP3
f.MP3
g.MP3
C
D
C. SEARCH VOL+orVOL- buttons input(2times) -d dirdisplay. If SEL /MENU
(ENTER)button is pressedagain for longerthan 0.5sec,first songin d dire file
will begin playing.
D.SEL/MENU(ENTER)button input (1 times)
E.SEARCH VOL+/VOL- buttons input (1 times)
F. SEL/MENU(ENTER) button input
-e file display
-f file display
-f MP3 File play start
G.If SEL/MENU(ENTER)button is pressed after SEARCH VOL+/- button is only
inputted once
H.NOTE:
a.This unit can only read MP3 disc in Id3v2.
b.This model alsohas song name(character) search functionfor MP3 disc
playback.Press APS/SEARCH button three times until CHAR SCH is shown
on display thenpress SEL/MENU buttononce, characterA blinks, use
VOL+/- buttons to select the right character(1letter of desired song name),
press SEL/MENU buttonto confirm yourchoice and secondcharacter Ablinks
for you to select, similar operation toenter other letters(max. 5 characters),
After enteringyour song name,pressSEL/MENU button morethan 1 secondto
start the search. If no such song, NOT FND will be shown on display.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
19.BAND/ID3:
During radio mode:Press it to select your desired radio band and the band which
is selected will be displayed on LCD.
During mp3 mode :Press search button to working Id3 as follow:
(depend on the disc used for Mp3)
File
folder
song
artist
album
20.POWER BUTTON
Press it(more than 1 second) to turn off and short press to turn on the unit.
21.FLASHING LED
If the front panel is not on the main unit, LED will be flashing.
22.RESET
RESET button is placed on the housing and must be activated with either a
ballpoint pen or thin metal object. The RESET button is to be activated for the
following reasons:
-Initial installation of the unit when all wiring is completed.
-All the function buttons do not operate.
-Error symbol on the display.
Note: If press RESET button, the unit can't work yet, please use a cotton swab
soaked in isopropyl alcohol to clean the socket on the back of the front panel.
23.LOC
When in the radio mode,press it to select local or distance broadcast station
receive sensitivity .
24. USB CONNECTOR SOCKET
When you want to use the USB,first you insert the USB connect line into the USB
connectorsocket of thefront panel and then insert the USB appliance into the USB
port to play(See fig.1). (Its operation is similar to the Mp3 operation.)
When the USB appliance connect to the unit, the system star playing track of
the USB appliance automatically.
NOTE:
To prevent damage to the USB,in the state of the USB playing not to pull out.
NOTE: The SCAN button on the remote controller(for RC version only)
SCAN BUTTON
Press it to scan up by one channel step with station detection. If a valid signal has
detected, the current frequency is blinked with in 5 seconds, then press it again to stop
scan and remain the current frequency; otherwise, the unit continue to scan up by one
channel step with station detection 5 seconds later.
USB Port
(USB connect line)
(Fig.1)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRIC CONNECTION
WIRING CONNECTION
AUX cable(optional)
ANTENNA CONNECTOR
RCH RED
LCH WHITE
IGNITION
RED
SWITCH(B+)
BOX
YELLOWFUSE
REAR RCA OUTPUT
CABLE(optional)
RCH RED
LCH WHITE
MEMORY(B+)
BLACK
BLUE
GROUND(B-)
AUTO
ANTENNA
FRONT
FRONT
WHITE
GREY
WHITE/BLACK
GREY/BLACK
Lch SPK
REAR
Rch SPK
REAR
GREEN
VIOLET
VIOLET/BLACK
GREEN/BLACK
Rch SPK
Lch SPK
NOTE:
In spite of having any kinds of speaker system, must use 4 ohms impedance
of speaker to reduce the distortion during high volume level.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
DASH BOARD
METAL MOUNTING
STRAP
HEX NUT
SPRING WASHER
PLAIN WASHER
TAPPING SCREW
CONSOLE
SLIDE BRACKET
HOUSING
HEX BOLT
KEY PLATE
PLASTIC TRIM OUT
KEY PLATE
1.WHILE INSTALLING THE FRONT PANEL, PLEASE MOUNT THE LEFT SIDE FIRST,
AND MAKE THE DIRECTION HOLE ON THE FRONT PANEL AIM AT THE LEFT GUIDE
ON THE UNIT
2.THAN PUSH THE RIGHT SIDE TO MOUNT THE RIGHT GUIDE
3.PUSH IT TO INSTALL THE FRONT
FRONT PANEL COMPLETELY .
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
CAUTION: DO NOT INSTALLTHE DETACHABLE PANEL BEFORE
CONNECTING THE WIRE.
1. The unit is designed for negative terminal of the battery which is connected to the
vehicle metal. Please confirm it before installation.
2. If the car interior is extremely hot, as after being parked in the sun, do not use the
playeruntil the car has been driven for a while to cool off the interior.
3. Press the OPEN button to flip down the front panel (see fig.1), Slide the guide knob
to remove the right side first, then take away the front panel. (see fig.2) and put it in the
protective case (see fig.3) for safe keeping.
4. Install the front panel back into its bracket and then push it back to the position for
playing (see fig.4).
FRONT PANEL
GUIDE KNOB
OPEN BUTTON
(FIG.1)
(FIG.2)
PROTECTIVE CASE
FRONT PANEL
FRONT PANEL
(FIG.3)
(FIG.4)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
DISC PLAY:
CLEANING DISCS
Before playing, clean the disc with a clean, lint-free.
Flip the disc in the direction of the arrow.
NOTE 1:
Do not use so solvents such as benzine, thinners. Commercially available
cleaners or antistatic spray damagethe unit.
Insert a discwith the labelsurface down. Doingso may damagethe unit.
NOTE 2:
Do not try to insert another disc when one has been already inserted.
Doing so maydamage the unit.
Handle the disc by its edge. And to keep the disc clean, do not touch the
surface.
Do not stickpaper or tapeon the disc.
Do not exposethe disc todirect sunlight orheat sources suchas hot airducts.
Or leave it in a car parked in direct sunlight where there can be a considerable
rise in temperature.
Label
surface up
PREPARING THE REMOTE CONTROL
INSERTING THE BATTERIES
1.Open the battery compartment cover.
2.Insert the new batteries. Make sure
that the positive and negative terminals
of the batteries are oriented indicated.
3.Close the cover
USING THE REMOTE CONTROL
Face the remote control towards the
player front face IR mark (remote
control signal receiver).
Operation angle: About +30 degree
in each the direction of the front of
the IR mark.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
GENERAL
POWER REQUIREMENT......................................................................DC 12V
CURRENT CONSUMPTION.................................................................15A
POWER OUTPUT............................................................................... 4 X 25W
RADIO SECTION
For 3 Bands
(Europe)
FM
For 2 Bands
(Europe)
FM
For 2 Bands
(U.S.A.)
FM
FREQUENCY RANGE
87.5 to 108 MHz 87.5to 108 MHz 87.5 to 107.9 MHz
USABLE SENSITIVITY...............................................................................3uV
I.F FREQUENCY................................................................................10.7MHz
MW
MW
AM
FREQUENCY RANGE
FREQUENCY RANGE
522 to 1620 KHz 522 to 1620 KHz 530 to 1710 KHz
LW
144 to 290KHz
LINE-OUT [OPTION]
OUTPUT..........................................................500mV @ FM 10% THD POWER
CD PLAYER
SYSTEM.......................................................COMPACT DISC AUDIO SYSTEM
USABLE DISC........................................................................COMPACT DISC
SIGNAL FORMAT.........................................SAMPLING FREQUENCY 44.1KHz
NO OF QUANTIZATION BITS 1 BIT
FREQUENCY CHARACTERISTICS........................5-40Hz-5dB 10K-20KHz-5dB
SIGNAL TO NOISE RADIO................................70dB [1KHz] [IEC-A NETWORK]
NUMBER OF CHANNELS.................................................................2 STEREO
CHASSIS DIMENSIONS................................................184[W] X54 [H] 170 [D]
10
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
Before going through the check list, check wiring connection.If any of
the problems persist after check list has been made, consult your nearest
service dealer.
SYMPTOM
NO POWER
CAUSE
SOLUTION
If the power supply is properly
connected to the car accessory
terminal,switch the ignition key
to "ACC"
The car ignition switch is
not on
Replace the fuse
The fuse is blown
Remove the disc in the player,
then put a new one
Presence of disc inside the
player.
Insert the compact disc with
the label facing upward
Inserting the disc in reverse
direction
DISC CANNOT
BE LOADED
OR EJECTED
The disc is extremely dirty
or defective
Clean the disc or try to play a
new one
Temperature inside the car Cool off or until the ambient
is too high
temperature return to normal
Leave the player off for an hour
then try again
Condensation
Volume is in minimum
Adjust volume to a desired level
Check wiring connection
NO SOUND
Wiring is not properly
connected
The installation angle is
more than 30 degrees
Adjust the installation angle less
than 30 degrees
SOUND SKIPS
Clean the compact disc, then
try to play a new one
The disc is extremely dirty
or defective disc
Press the RESET button.
Front panel is not properly fixed
into its place
The built-in microcomputer
is not operating properly
due to noise
THE OPERA-
TION KEYS
DO NOT WORK
The antenna cable is not
connected
THE RADIO
DOES NOT
WORK
Insert the antenna cable firmly
Select a station manually
The signals are too weak
88-C3950-02
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|