Proxima ASA Projector Pro AV 9550 User Manual

®
Pro AV 9550  
English  
E
D
F
Deutsch  
Français  
Italiano  
I
Español  
ES  
Projection lens is optional.  
PRESENTATIONS  
WORKING SESSIONS  
TRAINING  
MULTIMEDIA  
ANIMATION  
VIDEO  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS  
All the safety and operating instructions should be read before  
the product is operated.  
This projector should be operated only from the type of power  
source indicated on the marking label. If you are not sure of  
the type of power supplied, consult your authorized dealer or  
local power company.  
Read all of the instructions given here and retain them for later  
use. Unplug this projector from AC power supply before  
cleaning. Do not use liquid or aerosol cleaners. Use a damp  
cloth for cleaning.  
Do not overload wall outlets and extension cords as this can  
result in fire or electric shock. Do not allow anything to rest on  
the power cord. Do not locate this projector where the cord  
may be damaged by persons walking on it.  
Follow all warnings and instructions marked on the projector.  
For added protection to the projector during a lightning storm,  
or when it is left unattended and unused for long periods of  
time, unplug it from the wall outlet. This will prevent damage  
due to lightning and power line surges.  
Do not attempt to service this projector yourself as opening or  
removing covers may expose you to dangerous voltage or  
other hazards. Refer all servicing to qualified service  
personnel.  
E
Unplug this projector from wall outlet and refer servicing to  
qualified service personnel under the following conditions:  
a. When the power cord or plug is damaged or frayed.  
b. If liquid has been spilled into the projector.  
Do not expose this unit to rain or use near water... for  
example, in a wet basement, near a swimming pool, etc...  
Do not use attachments not recommended by the  
manufacturer as they may cause hazards.  
c. If the projector has been exposed to rain or water.  
d. If the projector does not operate normally by following the  
operating instructions. Adjust only those controls that are  
covered by the operating instructions as improper  
adjustment of other controls may result in damage and will  
often require extensive work by a qualified technician to  
restore the projector to normal operation.  
e. If the projector has been dropped or the cabinet has been  
damaged.  
f. When the projector exhibits a distinct change in  
performance-this indicates a need for service.  
Do not place this projector on an unstable cart, stand, or table.  
The projector may fall, causing serious injury to a child or  
adult, and serious damage to the projector. Use only with a  
cart or stand recommended by the manufacturer, or sold with  
the projector. Wall or shelf mounting should follow the  
manufacturer's instructions, and should use a mounting kit  
approved by the manufacturers.  
An appliance and cart combination should  
be moved with care. Quick stops,  
excessive force, and uneven surfaces  
may cause the appliance and cart  
combination to overturn.  
When replacement parts are required, be sure the service  
technician has used replacement parts specified by the  
manufacturer that have the same characteristics as the  
original part. Unauthorized substitutions may result in fire,  
electric shock, or injury to persons.  
Upon completion of any service or repairs to this projector, ask  
the service technician to perform routine safety checks to  
determine that the projector is in safe operating condition.  
Slots and openings in the back and bottom of the cabinet are  
provided for ventilation, to insure reliable operation of the  
equipment and to protect it from overheating.  
The openings should never be covered with cloth or other  
materials, and the bottom opening should not be blocked by  
placing the projector on a bed, sofa, rug, or other similar  
surface. This projector should never be placed near or over a  
radiator or heat register.  
This projector should not be placed in a built-in installation  
such as a book case unless proper ventilation is provided.  
Voor de klanten in Nederland  
Bij dit product zijn batterijen  
geleverd.  
Wanneer deze leeg zijn,  
moet u ze niet weggooien  
maar inleveren als KCA.  
Never push objects of any kind into this projector through  
cabinet slots as they may touch dangerous voltage points or  
short out parts that could result in a fire or electric shock.  
Never spill liquid of any kind on the projector.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPLIANCES  
Federal Communication Commission Notice  
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part  
15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when  
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful  
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful  
interference in which case the user will be required to correct the interference at his own expense.  
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such  
changes or modifications should be made, you could be required to stop operation of the equipment.  
AC POWER CORD REQUIREMENT  
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.  
E
AC Power Cord for the United States and Canada :  
AC Power Cord used in the United States and Canada is listed by the Underwriters  
Laboratories (UL) and certified by the Canadian Standard Association (CSA).  
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure  
that the plug will fit into the power outlet. Do not try to defeat this safety feature.  
Should you be unable to insert the plug into the outlet, contact your electrician.  
GROUND  
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILY ACCESSIBLE.  
Canada  
This Class A digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe A est conforme á la norme NMB-003 du Canada.  
EN 55022 Warning  
This is a Class B product. In a domestic environment it may cause radio interference, in which case the user may  
be required to take adequate measures.  
Safety Certifications  
UL, CUL, TUV, NOM, IRAM  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
FEATURES AND DESIGN  
6
7
COMPUTER MODE  
25  
SELECTING INPUT SOURCE  
25  
25  
27  
SELECTING COMPUTER SYSTEM  
PREPARATION  
COMPATIBLE COMPUTER SPECIFICATIONS  
PC ADJUSTMENT  
28  
28  
29  
AUTO PC ADJUSTMENT  
MANUAL PC ADJUSTMENT  
NAME OF EACH PART OF PROJECTOR  
7
8
8
9
9
9
10  
10  
SETTING-UP PROJECTOR  
CONNECTING AC POWER CORD  
LENS INSTALLATION  
PICTURE IMAGE ADJUSTMENT  
IMAGE LEVEL SELECT  
31  
31  
32  
IMAGE LEVEL ADJUSTMENT  
POSITIONING PROJECTOR  
LENS SHIFT ADJUSTMENT  
PICTURE LEVEL AND TILT ADJUSTMENT  
MOVING PROJECTOR  
PICTURE SCREEN ADJUSTMENT  
33  
E
VIDEO MODE  
34  
CONNECTING PROJECTOR  
11  
SELECTING INPUT SOURCE  
SELECTING VIDEO SYSTEM  
PICTURE IMAGE ADJUSTMENT  
IMAGE LEVEL SELECT  
34  
35  
36  
36  
37  
TERMINALS OF PROJECTOR  
CONNECTING TO COMPUTER  
CONNECTING TO VIDEO EQUIPMENT  
11  
14  
15  
IMAGE LEVEL ADJUSTMENT  
PICTURE SCREEN ADJUSTMENT  
38  
BEFORE OPERATION  
16  
SETTING  
39  
TOP CONTROLS AND INDICATORS  
16  
OPERATION OF REMOTE CONTROL  
LASER POINTER FUNCTION  
17  
17  
18  
SETTING MENU  
39  
REMOTE CONTROL BATTERIES INSTALLATION  
OPERATING ON-SCREEN MENU  
HOW TO OPERATE ON-SCREEN MENU  
FLOW OF ON-SCREEN MENU OPERATION  
MENU BAR  
19  
19  
19  
20  
APPENDIX  
42  
OPERATING WIRELESS MOUSE  
42  
MAINTENANCE  
42  
42  
43  
43  
44  
45  
WARNING TEMP. INDICATOR  
AIR FILTER CARE AND CLEANING  
CLEANING PROJECTION LENS  
LAMP MANAGEMENT  
BASIC OPERATION  
21  
TURNING ON / OFF PROJECTOR  
21  
LAMP REPLACEMENT  
ADJUSTING SCREEN  
ZOOM ADJUSTMENT  
22  
22  
22  
22  
22  
23  
23  
23  
TROUBLESHOOTING  
TECHNICAL SPECIFICATIONS  
46  
48  
FOCUS ADJUSTMENT  
LENS SHIFT ADJUSTMENT  
KEYSTONE ADJUSTMENT  
PICTURE FREEZE FUNCTION  
BLANK FUNCTION  
P-TIMER FUNCTION  
SOUND ADJUSTMENT  
24  
TRADEMARKS  
Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple Computer,Inc.  
IBM and PS/2 are trademarks or registered trademarks of International Business Machines, Inc.  
Windows and PowerPoint are registered trademarks of Microsoft Corporation.  
Proxima and InFocus are trademarks or registered trademarks of InFocus Corporation.  
Each name of corporations or products in the user's guide is a trademark or a registered trademark of its  
respective corporation.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEATURES AND DESIGN  
This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This  
projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD)  
technology.  
Motor-driven Lens Shift  
Compatibility  
This projector widely accepts various video and  
computer input signals including;  
Projection lens can be moved up and down with motor-  
driven lens shift function. This function makes it easy to  
provide projected image where you want.  
Zoom and focus can be also adjusted with motor-driven  
operation.  
Computers  
IBM-compatible or Macintosh computer up to 1600  
x 1200 resolution.  
6 Color Systems  
Power Management  
NTSC, PAL, SECAM, NTSC 4.43, PAL-M or PAL-  
N color system can be connected.  
Power Management function is provided to reduce power  
consumption while a projector is not in use.  
Component Video  
E
This Power Management function operates to turn  
Projection Lamp off when a projector detects signal  
interruption and any button is not pressed over 5  
minutes. Projection Lamp is automatically turned on  
again when a projector detects signal or any operation  
button is pressed.  
Component video signal, such as a DVD player  
output high definition TV signals including 480i,  
480p, 575i, 575p, 720p, 1035i, 1080i-50 or 1080i-  
60, can be connected.  
S-Video  
S-Video signal, such as a S-VHS VCR output  
signal, can be connected.  
This projector is shipped with this function ON.  
High Resolution Image  
Digital Visual Interface  
This projector provides 1280 x 1024 dots resolution for  
computer input and 800 horizontal TV lines. Resolution  
from a computer between SXGA (1280 x 1024) and  
UXGA (1600 x 1200) is compressed into 1280 x 1024  
dots. This projector cannot display image of over 1600 x  
1200 dots. When resolution of your computer is over  
than 1600 x 1200, reset a computer output for lower  
resolution.  
This projector is equipped with DVI 24-pin terminal for  
connecting DVI output from a computer.  
Multi Versatile Platform  
This projector applies various input/output terminals and  
3 terminal slots for expansion to tune to diversity of  
signals from computers and video equipment.  
Multi-Scan System  
Selectable Terminal Slots  
This projector has Multi-Scan System to conform to  
almost all computer output signals quickly. There is no  
need for troublesome manual adjustment of frequency  
and other settings.  
3-built-in Terminal Slots enable you to arrange any  
combinations of input sources just by changing Terminal  
Boards. For Terminal Boards, contact sales dealer  
where you purchased a projector.  
One-Touch Auto PC Adjustment  
Laser Pointer Function  
Incoming computer video signals are recognized and  
best adjustment is automatically set by Auto PC  
Adjustment. No complicated setup is necessary and  
projection is always precise.  
Remote Control Unit supplied with this projector includes  
Laser Pointer function. This function helps you to make  
a smart presentation on a projected screen.  
Progressive Scan Function  
Wireless Mouse  
This function converts interlace video signals into  
progressive scan signals and provide fine picture quality.  
Remote Control Unit supplied with this projector has  
Wireless Mouse function for a connected computer. This  
function enables you to operate both projector and  
computer with Remote Control Unit only.  
Digital Zoom (for Computer)  
Digital Zoom function adjusts image size to approx. 1/4 ~  
49 times of original image size, allowing you to focus on  
crucial information at a presentation.  
Multilanguage Menu Display  
Operation menu is displayed in; English, German,  
French, Italian, Spanish, Portuguese, Dutch, Swedish,  
Chinese, Korean or Japanese.  
Keystone Correction  
Positioning height of a projector may result in distorted  
image being displayed in a trapezoid shape. Keystone  
Correction solves this problem by digitally altering  
projection to produce undistorted images.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
NAME OF EACH PART OF PROJECTOR  
FRONT  
SPEAKERS  
INFRARED  
REMOTE RECEIVER  
PROJECTION LENS  
LENS COVER  
E
CARRYING HANDLE  
CAUTION  
Do not turn on a projector with lens cover  
attached. High temperature from light beam may  
damage lens cover and result in fire hazard.  
EXHAUST VENT  
ADJUSTABLE FEET  
INFRARED  
BACK  
AIR INTAKE  
REMOTE RECEIVER  
VENT  
EXHAUST VENT  
HOT AIR EXHAUSTED !  
Air blown from exhaust vent is hot. When  
using or installing a projector, following  
precautions should be taken.  
Do not put a flammable object near this vent.  
Keep rear grills at least 3(1m) away from  
any object, especially heat-sensitive object.  
Do not touch this area, especially screws  
and metallic parts. This area will become  
hot while a projector is used.  
LAMP  
EXHAUST VENT  
COVER  
This projector detects internal temperature  
and automatically controls operating power  
of Cooling Fans.  
POWER CORD  
CONNECTOR  
MAIN ON / OFF  
SWITCH  
BOTTOM  
AIR INTAKE VENTS  
This projector is equipped with cooling  
fans for protection from overheating.  
Pay attention to following to ensure  
proper ventilation and avoid a possible  
risk of fire and malfunction.  
Do not cover vent slots.  
Keep bottom clear of any objects.  
Obstructions may block cooling air.  
AIR INTAKE VENT  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
SETTING-UP PROJECTOR  
CONNECTING AC POWER CORD  
This projector uses nominal input voltages of 100-120 V  
or 200-240 V AC. This projector automatically selects  
correct input voltage. It is designed to work with single-  
phase power systems having a grounded neutral  
conductor. To reduce risk of electrical shock, do not plug  
into any other type of power system.  
Consult your authorized dealer or service station if you  
are not sure of type of power supply being in use.  
Connect a projector with a peripheral equipment before  
turning a projector on. (Refer to pages 12 ~ 15 for  
connection.)  
E
Connect AC Power Cord (supplied) to  
a projector.  
AC outlet must be near this equipment  
and must be easily accessible.  
NOTE ON POWER CORD  
AC Power Cord must meet requirement of country where you use a projector.  
Confirm AC plug type with chart below and proper AC power cord must be used.  
If supplied AC Power Cord does not match AC outlet, contact your sales dealer.  
Projector side  
AC Outlet side  
For U.S.A. and Canada  
For Continental Europe  
Ground  
To POWER CORD  
CONNECTOR on a  
projector.  
To AC Outlet.  
(120 V AC)  
To AC Outlet.  
(200 - 240 V AC)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
LENS INSTALLATION  
Before setting up a projector, install Projection Lens on Projector.  
1. Before installation, check where a projector is used and prepare suitable lens. For specifications of a  
Projection Lens, refer to manual separately attached or contact sales dealer where you purchased a  
projector.  
2. For installation, refer to installation manual supplied to a Projector.  
When moving or setting up a projector, be sure to replace Lens Cover to protect surface. And be  
careful not to hold or subject lens to strong forces. It may damage lens, cabinet, or mechanical parts.  
POSITIONING PROJECTOR  
This projector is designed to project on a flat projection  
E
SCREEN  
surface.  
ROOM LIGHT  
Brightness in a room has a great influence on picture  
quality. It is recommended to limit ambient lighting in  
order to provide best image.  
VENTILATION  
This projector is equipped with cooling fan to protect it from  
overheating. Pay attention to following to ensure proper venti-  
lation and avoid a possible risk of fire and malfunction.  
Do not cover vents with papers or other materials.  
Keep rear grill at least 3 feet (1 m) away from any  
object.  
Make sure that there are no objects under a pro-  
jector. An object under a projector may prevent a  
projector from taking cooling air through bottom  
EXHAUST VENT  
(FRONT AND REAR SIDE)  
AIR INTAKE VENT  
(BOTTOM SIDE)  
vent.  
LENS SHIFT ADJUSTMENT  
Projection lens can be moved up and down with motor-driven lens shift function. This function makes it easy to  
provide projected image where you want.  
Use LENS SHIFT button and  
POINT UP/DOWN button to  
move image up or down.  
(Refer to page 22.)  
MOVED UP OR DOWN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
PICTURE LEVEL AND TILT ADJUSTMENT  
Picture tilt and projection angle can be adjusted by rotating  
ADJUSTABLE FEET. Projection angle can be adjusted up  
to 6.9 degrees by rotating Adjustable Feet.  
DOWN  
UP  
UP  
DOWN  
E
ADJUSTABLE FEET  
MOVING PROJECTOR  
Use carry handle when moving a projector.  
Replace lens cover and rotate adjustable feet fully  
clockwise.  
CAUTION IN CARRYING OR TRANSPORTING A PROJECTOR  
Do not drop or bump a projector, otherwise damages or malfunctions may result.  
When carrying a projector, use a suitable carrying case.  
Do not transport a projector by using a courier or transport service in an unsuitable transport case. This  
may cause damage to a projector. To transport a projector through a courier or transport service, consult  
your dealer and best case should be applied.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING PROJECTOR  
TERMINALS OF PROJECTOR  
This projector applies various input/output terminals and 3 terminal slots for expansion to tune to diversity of signals from  
computers and video equipment. 3-built-in Terminal Slots enable you to arrange desired combinations of input sources just  
by changing Terminal Boards. For Terminal Boards, contact sales dealer where you purchased a projector.  
NOTE; DVI Terminal is unavailable for INPUT 3 slot.  
3 TERMINAL SLOTS (Factory set)  
audio  
PC control  
DVI  
R
L
DVI Terminal  
(mono)  
audio  
PC control  
R/Pr  
G/Y  
B/Pb  
H/HV  
V
R
R
L
E
5 BNC Terminal  
AV Terminal  
(mono)  
audio  
S-video  
C
video/Y  
L
(mono)  
audio OUT  
USB  
serial port IN  
serial port OUT  
L
R
R/C jack  
reset  
(mono)  
INPUT/OUTPUT  
TERMINALS  
REPLACEMENT OF TERMINAL  
Remove 2 Screws on terminal.  
1
Pull out terminal by holding handle.  
2
Replace terminal. Insert terminal along Guide to fit Plug  
into Socket.  
3
Tighten screws to secure terminal.  
Screws  
4
Guide  
NOTES ON ORDERING OR USING  
OPTIONAL INTERFACE BOARD  
Socket  
When ordering or using Optional Interface Board  
(Terminal Board), contact your sales dealer. When con-  
tacting the sales dealer, tell the Optional Control  
Number (Op.cont.No.) in the menu that is located under  
Language Select Menu. (See page 39.)  
Plug  
Figure shows HDB 15-PIN terminal (Optional parts).  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING PROJECTOR  
INPUT/OUTPUT TERMINALS AND JACKS  
INPUT 2  
INPUT 1  
INPUT 1, 2, 3  
DVI INPUT TERMINAL  
5 BNC INPUT JACKS  
AUDIO INPUT JACKS  
Connect an audio output  
from computer or video  
equipment to these jacks.  
(Refer to P14, 15.)  
Connect component video output (Cr, Y,  
Cb or Pr, Y, Pb) from video equipment to  
R/Pr, G/Y and B/Pb jacks or connect  
computer output [5 BNC Type (Red,  
Green, Blue, Horiz. Sync and Vert.  
Sync.)] from computer to R/Pr, G/Y,  
B/Pb, H/HV and V jacks. (Refer to P14,  
15)  
Connect computer output  
(Digital/Analog DVI-I type) to  
this terminal.  
(Refer to P14.)  
E
audio  
PC control  
DVI  
R
L
(mono)  
audio  
PC control  
R/Pr  
G/Y  
B/Pb  
H/HV  
V
R
R
L
INPUT 1, 2  
CONTROL PORT CONNECTORS  
(mono)  
When controlling computer  
with Remote Control of this  
projector, connect mouse port  
of your personal computer to  
these connectors.  
audio  
S-video  
C
video/Y  
L
(mono)  
audio OUT  
(Refer to P14.)  
USB  
serial port IN  
serial port OUT  
L
R
R/C jack  
reset  
(mono)  
INPUT 3  
INPUT 3  
S-VIDEO INPUT JACK  
AV INPUT (VIDEO/Y, C) JACKS  
Connect S-VIDEO output from  
video equipment to this jack.  
(Refer to P15.)  
Connect composite video output from  
video equipment to VIDEO/Y jack or  
connect Separate Y/C video outputs to  
VIDEO/Y and C jacks. (Refer to P15.)  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING PROJECTOR  
SERIAL PORT  
IN TERMINAL  
SERIAL PORT  
OUT TERMINAL  
This terminal outputs signal from  
SERIAL PORT IN. More than two  
projectors can be controlled with one  
computer by connecting SERIAL PORT  
IN. of another projector to this terminal.  
If you control a projector by computer,  
you must connect a cable (not provided)  
from your computer to this terminal.  
audio  
PC control  
E
DVI  
R
L
(mono)  
audio  
PC control  
R/Pr  
G/Y  
B/Pb  
H/HV  
V
R
R
L
(mono)  
audio  
S-video  
C
video/Y  
L
USB PORT (Series B)  
(mono)  
This port is used to control a projector  
with computer. It is also used to  
control computer with Remote Control  
of this projector.  
audio OUT  
USB  
serial port IN  
serial port OUT  
L
R
R/C jack  
(Refer to P40-42.)  
rese
(mono)  
Connect USB port of computer to this  
port.  
AUDIO OUTPUT JACKS  
R/C JACK  
When using Wired / Wireless Remote  
Control Unit as Wired Remote  
Control, Connect Wired Remote  
Control Unit to this jack with Remote  
Control Cable (supplied). (Refer to  
page 18.)  
Connect an external audio  
amplifier to these jacks.  
(Refer to P14, 15.)  
RESET BUTTON  
This projector uses a micro processor to control a  
unit. Occasionally, this micro processor may  
malfunction and need to be reset. This can be done  
by pressing RESET button with a pen, which will  
shut down and restart unit. Do not use RESET  
function excessively.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING PROJECTOR  
CONNECTING TO COMPUTER  
Cables used for connection (= Cables are not supplied with this projector.)  
VGA Cable (HDB 15 pin)  
NOTE :  
Control Cable for PS/2 port, Serial port, or ADB port  
When connecting cable, power cords of both  
a
MAC/VGA Adapter, DVI/VGA Adapter  
DVI Cable  
BNC Cable (BNC x 5) ✽  
Audio Cables (RCA x 2) ✽  
projector and external equipment should be  
disconnected from AC outlet. Turn a projector  
and peripheral equipment on before computer is  
switched on.  
IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA/UXGA)  
E
Desktop type  
Laptop type  
Monitor Output  
Monitor Output  
Monitor Output Audio Output  
Serial port PS/2 port ADB port  
MAC/VGA  
Adapter  
Set slide switches  
following chart  
below.  
Control Cable  
for PS/2 Port  
Control Cable  
for Serial Port  
Control Cable  
for ADB Port  
Audio Cable  
(stereo)  
Terminal  
Terminal  
Terminal  
VGA Cable  
BNC Cable ✽  
DVI Cable  
DVI/VGA  
Adapter  
Use one of these Control  
Cables corresponding  
with terminal of your  
computer.  
audio  
PC control  
DVI  
L
R
(mono)  
audio  
PC control  
R/Pr  
G/Y  
B/Pb  
H/HV  
V
L
R
(mono)  
Terminals of  
a Projector  
audio  
S-video  
C
video/Y  
L
R
(mono)  
audio OUT  
USB  
serial port IN  
serial port OUT  
R
L
R/C jack  
reset  
(mono)  
MAC/VGA ADAPTER  
Switches of  
MAC/VGA Adapter  
AUDIO OUT  
ON  
ON  
DIP  
1
2
3
4
5
6
Audio Cable  
(stereo) ✽  
OFF  
Set switches as shown in table below depending on  
RESOLUTION MODE that you want to use before  
your turn on a projector and computer  
Audio Input  
External Audio Equipment  
SWITCHES  
1
2
3
4
5
6
MODE  
Audio Speaker  
(stereo)  
13"MODE (640 x 480)  
ON ON OFF OFF OFF OFF  
OFF ON OFF ON OFF OFF  
OFF ON ON OFF OFF OFF  
ON ON ON ON OFF OFF  
Audio Amplifier  
16"MODE (832 x 624)  
19"MODE (1024 x768)  
21"MODE (1152 x 870)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTING PROJECTOR  
CONNECTING TO VIDEO EQUIPMENT  
Cables used for connection  
NOTE :  
When connecting cable, power cords of both a  
projector and external equipment should be  
disconnected from AC outlet. Turn a projector  
and peripheral equipment on before computer is  
switched on.  
Video Cable (BNC x 1, BNC x 2 or BNC x 3) ✽  
S-VIDEO Cable ✽  
Audio Cable (RCA x 2) ✽  
(= Cables are not supplied with this projector.)  
Component video output equipment.  
(such as DVD player or  
Video Source (example)  
Video Cassette Recorder  
Video Disc Player  
high-definition TV source.)  
E
Composite  
Video Output  
Separate Y/C  
Video Output  
Component Video Output  
Pr/Cr  
Pb/Cb  
S-VIDEO Output  
Audio Output  
Y
R
L
Y
C
Video  
Cable  
S-VIDEO  
Cable ✽  
Audio Cable  
(Stereo) ✽  
Video  
Cable ✽  
Video  
Cable ✽  
S-VIDEO  
AV AUDIO IN  
Pr/Cr-Y-Pb/Cb  
Y-C  
VIDEO  
audio  
PC control  
DVI  
R
L
(mono)  
PC control  
audio  
R/Pr  
G/Y  
B/Pb  
H/HV  
V
R
R
L
Terminals of  
a Projector  
(mono)  
audio  
S-video  
C
video/Y  
L
(mono)  
audio OUT  
USB  
serial port IN  
serial port OUT  
R
L
R/C jack  
reset  
(mono)  
AUDIO OUT  
Audio Cable  
(Stereo) ✽  
Audio Input  
External Audio Equipment  
Audio Amplifier Audio Speaker (stereo)  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE OPERATION  
TOP CONTROLS AND INDICATORS  
This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.  
TOP CONTROL AND  
INDICATORS  
E
POWER ON–OFF BUTTON  
FOCUS BUTTONS  
VOLUME BUTTONS  
INPUT BUTTONS  
Used to adjust volume.  
(P24)  
Used to select input  
source. (P25)  
Used to adjust focus.  
(P22)  
Used to turn a projector  
on or off. (P21)  
LAMP REPLACE INDICATOR  
Turns to yellow when  
life of a projection lamp  
draws to an end. (P44,  
45)  
ZOOM BUTTONS  
power  
Used to adjust zoom.  
(P22)  
WARNING TEMP. INDICATOR  
Flashes red when  
input  
focus  
volume  
zoom  
internal  
temperature is too  
high. (P42)  
projector  
AUTO PC ADJ. BUTTON  
Use to operate AUTO  
PC Adjustment function.  
(P28)  
READY INDICATOR  
auto  
pc adj.  
lens  
shift  
image  
menu  
select  
Lights green when a  
projector is ready to be  
lamp  
replace  
warning  
temp.  
ready  
lamp  
turned on.  
And it  
flashes green in Power  
Management mode.  
(P40)  
IMAGE BUTTON  
Used to select image  
level. (P31, 36)  
LAMP INDICATOR  
SELECT BUTTON  
Becomes dim when a  
projector is turned on.  
And bright when a  
projector is in stand-by  
mode.  
Used to execute item  
selected. It is also used  
to expand / compress  
image in DIGITAL  
ZOOM mode. (P33)  
LENS SHIFT BUTTON  
MENU BUTTON  
Used to select LENS SHIFT  
function. (P22)  
Used to open or close  
MENU operation. (P19,  
20)  
POINT BUTTONS  
Used to select an item or adjust  
value in ON-SCREEN MENU. They  
are also used to pan image in  
DIGITAL ZOOM +/mode. (P33)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE OPERATION  
OPERATION OF REMOTE CONTROL  
Left Side  
LASER POINTER INDICATOR  
POWER ON-OFF BUTTON  
Used to turn projector on or  
off. (P21)  
Lights red while laser beam  
is emitted from Laser Light  
Window.  
power  
INPUT 1/2 BUTTON  
zoom  
focus  
volume  
Used to select input source  
either INPUT 1 or INPUT 2.  
(P25)  
INPUT 3 BUTTON  
Used to select input source  
(INPUT 3). P25  
d.zoom  
mute  
input 1/2  
input 3  
MENU BUTTON  
Used to select MENU  
operation. (P19, 20)  
E
menu  
POINT BUTTON  
Used to move a pointer on  
ON-SCREEN MENU, adjust  
each item, or pan image in  
DIGITAL ZOOM +/mode.  
(P33)  
It is also used as a PC mouse  
in Wireless Mouse Operation.  
(P42)  
SELECT BUTTON  
Used to execute item  
selected, or to expand  
or compress image in  
DIGITAL ZOOM +/–  
mode. (P33)  
It is also used as a PC  
mouse in Wireless  
Mouse Operation. (P42)  
ALL-OFF SWITCH  
laser  
lens shift  
When using Remote Control Unit,  
turn this switch to on. And turn it  
to all offwhen it is not used.  
keystone  
When pressing center of this  
button, it works as SELECT  
button.  
blank  
freeze  
image  
LASER BUTTON  
auto pc adj.  
RIGHT CLICK BUTTON  
Used to operate Laser  
Pointer Function. Laser  
beam is emitted while  
pressing this button within  
1 minute.  
p-timer  
Used as a PC mouse in  
Wireless Mouse Operation.  
(P42)  
When using this Laser  
Pointer for more than 1  
minute, release LASER  
button and press it again.  
P-TIMER BUTTON  
Used to operate P-TIMER  
function. (P23)  
LASER POINTER FUNCTION  
This Remote Control Unit emits a laser beam as laser pointer function from Laser Light Window. When LASER button is  
pressed, laser light goes on. And when LASER button is being pressed for more than 1 minute or LASER button is released,  
light goes off. LASER POINTER INDICATOR lights RED and Laser is emitted with RED light to indicate laser beam is being  
emitted.  
Laser emitted is a class II laser; therefore, do not look into Laser Light Window or shine laser beam on yourself or other  
people. Three marks bellow are caution labels for laser beam.  
CAUTION : Use of controls, adjustments or performance of procedures other than those specified herein may result  
hazardous radiation exposure.  
These caution labels are put on remote control.  
LASER POINTER INDICATOR  
Laser Light Window  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE OPERATION  
Operating Range  
power  
Point Remote Control Unit toward  
projector (Receiver Window)  
whenever pressing any button.  
Maximum operating range for  
Remote Control Unit is about 16.4’  
(5m) and 60° in front and rear of a  
projector.  
ZOOM BUTTON  
Used to adjust zoom.  
(P22)  
zoom  
focus  
volume  
VOLUME BUTTON  
Used to adjust volume.  
(P24)  
d.zoom  
mute  
input 1/2  
input 3  
FOCUS BUTTON  
Used to adjust focus.  
(P22)  
D.ZOOM BUTTON  
Used to select DIGITAL  
ZOOM +/mode and  
resize image. (P33)  
menu  
60°  
MUTE BUTTON  
Used to mute sound.(P24)  
16.4’  
(5 m)  
E
LENS SHIFT BUTTON  
Used to select LENS  
SHIFT function. (P22)  
laser  
lens shift  
BLANK BUTTON  
Used to turn picture into  
black image. (P23)  
FREEZE BUTTON  
Used to freeze picture.  
(P23)  
keystone  
blank  
freeze  
image  
IMAGE BUTTON  
Used to select image  
level. (P31, 36)  
auto pc adj.  
AUTO PC ADJ. BUTTON  
Use to operate AUTO PC  
Adjustment function. (P28)  
p-timer  
16.4’  
(5 m)  
60°  
KEYSTONE BUTTON  
Used  
to  
correct  
WIRED REMOTE JACK  
keystone distortion.  
(P22, 39)  
When using as Wired  
Remote Control, connect  
Remote Control Cable to  
this jack.  
Battery installation is  
required when using as  
Wired Remote Control.  
Remote Control Batteries Installation  
Remove battery  
compartment lid.  
Slide batteries into  
compartment.  
Replace compartment lid.  
1
2
3
Two AA size batteries  
Press lid down-  
ward and slide it.  
For correct polarity (+ and  
), be sure battery  
terminals are in contact  
with pins in compartment.  
To insure safe operation, please observe following precautions :  
Use (2) AA, UM3 or R06 type alkaline batteries.  
Replace two batteries at same time.  
Do not use a new battery with an used battery.  
Avoid contact with water or liquid.  
Do not expose Remote Control Unit to moisture, or heat.  
Do not drop Remote Control Unit.  
If a battery has leaked on Remote Control Unit, carefully wipe case clean and install new batteries.  
Danger of explosion if battery is incorrectly replaced.  
Dispose of used batteries according to the batteries manufacturers instructions and local rules.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE OPERATION  
OPERATING ON-SCREEN MENU  
HOW TO OPERATE ON-SCREEN MENU  
You can control and adjust this projector through ON-SCREEN  
MENU. Refer to following pages to operate each adjustment on  
ON-SCREEN MENU.  
WIRELESS REMOTE CONTROL  
POINT BUTTON  
Used to move Pointer  
UP/ DOWN/ RIGHT/  
LEFT.  
1 DISPLAY MENU  
Press MENU button to display ON-SCREEN MENU.  
2 MOVING POINTER  
SELECT BUTTON  
Move pointer (see below) or adjust value of item by pressing  
Used to select item.  
POINT button(s) on Top Control or on Remote Control Unit.  
E
TOP CONTROL  
Pointer is a icon on ON-SCREEN MENU to select item. See fig-  
ures on section "FLOW OF ON-SCREEN MENU OPERATION"  
below.  
POINT BUTTONS  
Used to move Pointer  
UP/ DOWN/ RIGHT/  
LEFT.  
input  
focus  
volume  
oom  
3 SELECT ITEM  
Select item or set selected function by pressing SELECT button.  
uto  
c adj.  
lens  
shift  
image  
menu  
select  
SELECT BUTTON  
Used to select item.  
FLOW OF ON-SCREEN MENU OPERATION  
MENU BAR  
MENU ICON  
Display ON-SCREEN MENU  
Press MENU button to display ON-SCREEN MENU (MENU  
BAR). A red frame is POINTER.  
1
POINTER  
(red frame)  
POINTER (red frame)  
Press POINT DOWN button to  
move POINTER.  
Select Menu to be adjusted  
Move POINTER (red frame) to MENU ICON that you want to  
select by pressing POINT RIGHT / LEFT buttons.  
2
ITEM  
Control or adjust item through ON-SCREEN MENU  
Press POINT DOWN button and move POINTER (red frame  
or red arrow) to ITEM that you want to adjust, and then press  
SELECT button to show ITEM DATA.  
3
SELECT  
BUTTON  
Adjust ITEM DATA by pressing POINT RIGHT / LEFT  
buttons.  
Refer to following pages for details of respective  
adjustments.  
4
ITEM DATA  
Press POINT LEFT/RIGHT  
buttons to adjust value or  
set function.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE OPERATION  
MENU BAR  
FOR PC SOURCE  
Press MENU BUTTON while connecting to PC input source.  
IMAGE SELECT MENU  
SCREEN MENU  
SETTING MENU  
Used to select  
Used to adjust size  
of image. [Normal  
/ True / Wide /  
Digital zoom +/]  
(Refer to P33)  
Used to change  
settings of projector  
or reset Lamp  
Replace Counter.  
(Refer to P39-41)  
GUIDE WINDOW  
PC SYSTEM MENU  
image level among  
Standard, Real  
and Image 1 ~ 4.  
(Refer to P31)  
Shows selected  
item of ON-  
SCREEN MENU.  
Used to select  
computer system.  
(Refer to P26, 27)  
E
INPUT MENU  
PC ADJUST MENU  
IMAGE ADJUST MENU  
SOUND MENU  
Used to select  
Used to adjust  
parameters to  
match with input  
signal format.  
Used to adjust  
Used to adjust  
sound [volume,  
Bass or Treble],  
to select Built-in  
SP On-Off and  
Sound Mute.  
input source (Input  
1, Input 2 or Input  
3). Refer to P25  
computer image.  
[Contrast / Brightness  
/ White Balance  
(R/G/B) / Sharpness/  
Gamma/Progressive]  
(Refer to P32)  
(Refer to P28-30)  
(Refer to P24)  
FOR VIDEO SOURCE  
Press MENU BUTTON while connecting to VIDEO input source.  
INPUT MENU  
Used to select  
input source (Input  
1, Input 2 or Input  
3). Refer to P35  
IMAGE SELECT MENU  
SCREEN MENU  
Used to select image  
level among  
Standard, Cinema  
and Image 1 ~ 4.  
(Refer to P36)  
Used to set size of  
image to Normal  
or Wide.  
(Refer to P38)  
AV SYSTEM MENU  
IMAGE ADJUST MENU  
Same function as  
Menu for PC source.  
Same function as  
Menu for PC source.  
Used to select  
system of selected  
video source.  
Used to adjust picture image.  
[Contrast / Brightness / Color /  
Tint / White balance (R/G/B) /  
Sharpness / Gamma/Noise  
Reduction/Progressive]  
(Refer to P35)  
(Refer to P37, 38)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
TURNING ON / OFF PROJECTOR  
TURNING ON PROJECTOR  
Complete peripheral connections (with Computer, VCR, etc.)  
before turning on projector. (Refer to "CONNECTING TO  
PROJECTOR" on Pages 12~15 for connecting that equipment.)  
1
LAMP STATUS  
INPUT 1  
1
2
Connect a projector's AC Power Cord into a wall outlet and turn  
MAIN ON / OFF SWITCH to ON. LAMP indicator lights RED,  
and READY indicator lights GREEN.  
2
3
30  
Press POWER ON-OFF button on Top Control or on Remote  
Control Unit to ON. LAMP indicator dims, and Cooling Fans start  
to operate. Preparation Display appears on a screen and count-  
down starts. Signal from source appears after 30 seconds.  
Current Input position and Lamp status are also displayed on  
screen for 5 seconds. (Refer to "LAMP MANAGEMENT" on  
page 44.)  
E
Preparation Display disappears after  
30 seconds.  
TURNING OFF PROJECTOR  
Press power ON-OFF button on Top Control or on Remote  
Control Unit, and a message "Power off?" appears on a screen.  
1
2
Press power ON-OFF button again to turn off projector. LAMP  
indicator lights bright and READY indicator turns off. After  
approximate 90 seconds, READY indicator will light green again  
and projector may be turned on by pressing power ON-OFF  
button.  
Power off?  
Cooling fans will operate for approximate 2 minutes after projec-  
tor is turned off. To power down completely, turn MAIN ON/OFF  
SWITCH to OFF and disconnect AC Power Cord.  
Message disappears after 4 seconds.  
3
TO MAINTAIN LIFE OF LAMP, ONCE YOU TURN  
PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE  
TURNING IT OFF.  
When Power Management function is ON, projector detects signal interruption and turns off Projection Lamp automatically.  
Refer to Power Managementon pages 39 and 40.  
When WARNING TEMP. indicator flashes red, projector is automatically turned off. Wait at least 5 minutes before turning on  
projector again.  
When WARNING TEMP. indicator continues to flash, follow procedures below:  
1. Turn MAIN ON / OFF SWITCH to OFF and disconnect AC Power Cord from an AC outlet.  
2. Check Air Filters for dust accumulation.  
3. Clean Air Filters. (See "AIR FILTER CARE AND CLEANING" section on page 43.)  
4. Turn a projector on again.  
If WARNING TEMP. indicator should still continue to flash, contact sales dealer where you purchased this projector or  
service center.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
ADJUSTING SCREEN  
ZOOM ADJUSTMENT  
Press ZOOM /button on Top Control or on Remote Control  
Unit. Message Zoomis displayed.  
1
2
Press ZOOM button to make image larger, and press ZOOM  
button to make image smaller.  
Zoom  
Message disappears after 4 seconds.  
E
FOCUS ADJUSTMENT  
Press FOCUS /button on Top Control or on Remote Control  
Unit. Message Focusis displayed.  
1
2
Adjust focus of image by pressing FOCUS /button(s) .  
Focus  
Message disappears after 4 seconds.  
LENS SHIFT ADJUSTMENT  
Press LENS SHIFT button on Top Control or on Remote Control  
Unit. Message Lens shiftis displayed.  
1
2
Press POINT UP button to move image up, press POINT DOWN  
button to move image down.  
Lens shift  
Message disappears after 4 seconds.  
KEYSTONE ADJUSTMENT  
If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.  
Press KEYSTONE /button on Remote Control Unit or select  
Keystone on SETTING menu. (Refer to page 39.) Keystone  
dialog box appears.  
1
Correct keystone distortion by pressing KEYSTONE /button  
or POINT UP/DOWN button(s). Press KEYSTONE button or  
POINT UP button to reduce upper part of image, and press  
KEYSTONE button or POINT DOWN button to reduce lower  
part.  
2
Reduce upper width with KEY STONE button or  
POINT UP button.  
Reduce lower width with KEY STONE button or  
POINT DOWN button.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
PICTURE FREEZE FUNCTION  
Press FREEZE button on Remote Control Unit to freeze picture on-screen. To cancel FREEZE function, press FREEZE  
button again or press any other button except POINT / SELECT / RIGHT CLICK / P-TIMER / LASER button.  
BLANK FUNCTION  
Press BLANK button on Remote Control Unit to black out a image. To  
restore to normal, press BLANK button again or press any other  
button.  
Blank  
E
Message disappears after 4 seconds.  
P-TIMER FUNCTION  
Press P-TIMER button on Remote Control unit. Timer display 00 : 00”  
appears on a screen and timer starts to count time (00 : 00 ~ 59 : 59).  
To stop P-TIMER display, press P-TIMER button. And then, press P-TIMER  
button again to cancel P-TIMER function.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATION  
SOUND ADJUSTMENT  
Indicates roughly level of  
volume.  
DIRECT OPERATION  
Volume  
Press VOLUME (+/) button(s) on Top Control or on Remote Control  
Unit to adjust volume. Volume dialog box appears on screen for a few  
seconds.  
(+) button to increase volume, and () button for decreasing.  
Mute  
Press MUTE button on Remote Control Unit to cut off sound. To  
restore sound to its previous level, press MUTE button again or press  
Volume (+/) button(s).  
Press MUTE button to set  
Mute function On or Off.  
E
Display disappears after 4 seconds.  
MENU OPERATION  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT buttons to move a red frame pointer to  
SOUND Menu icon.  
SOUND MENU  
1
Press POINT DOWN button to move a red frame pointer to item  
that you want to select, and then press SELECT button.  
2
SOUND Menu icon  
Indicates roughly  
level of volume.  
Volume  
On  
Press POINT LEFT/RIGHT buttons  
to adjust value.  
To increase volume, press POINT RIGHT button, and press POINT  
LEFT button for decreasing.  
Close SOUND Menu.  
Treble  
To adjust Treble sound, press POINT RIGHT button or POINT LEFT  
button.  
Bass  
To adjust Bass sound, press POINT RIGHT button or POINT LEFT  
button.  
Built-in SP.  
Press POINT LEFT/RIGHT button(s) to switch built-in speaker on and  
off.  
Mute  
Press POINT LEFT/RIGHT button(s) to cut off sound. Dialog box  
display is changed to Onand sound is cut off. To restore sound to  
its previous level, press POINT LEFT/RIGHT button(s) again.  
Quit  
Closes SOUND MENU.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER INPUT  
SELECTING INPUT SOURCE  
INPUT 1/2 button  
INPUT /✽✽ buttons  
INPUT 1  
DIRECT OPERATION  
Select INPUT source by pressing INPUT 1/2 and INPUT 3  
buttons on Remote Control Unit.  
INPUT 1  
INPUT 2  
INPUT 3 button  
INPUT 3  
INPUT 2  
Select INPUT source by pressing INPUT /button on Top  
Control.  
INPUT 3  
MENU OPERATION  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT buttons to select Input and press SELECT  
1
E
button.  
Menu will appear.  
Another dialog box INPUT SELECT  
INPUT Menu icon  
Press POINT DOWN button and a red-arrow icon will appear.  
Move arrow to INPUT source that you want to select, and then  
press SELECT button.  
2
SELECTING COMPUTER SYSTEM  
WHEN SELECT INPUT 1 (DVI INPUT TERMINAL )  
INPUT MENU  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT button to move a red frame pointer to  
INPUT Menu icon.  
1
2
3
INPUT Menu icon  
Press POINT DOWN button to move a red arrow pointer to Input  
1 and then press SELECT button. Source Select Menu will  
appear.  
Move a pointer (red arrow) to  
Input 1 and press SELECT  
button.  
Move a pointer to either Digital or Analog and then press  
SELECT button.  
Input 1  
Source Select Menu  
When digital signal is connected on DVI terminal, select  
Digital.  
Move a pointer to Digital or  
Analog and press SELECT  
button.  
Digital  
When analog signal is connected on DVI terminal, select  
Analog.  
Analog  
WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )  
When connect a computer output [5 BNC Type (Red, Green, Blue,  
Horiz. Sync and Vert. Sync.)] from a computer to R/Pr, G/Y, B/Pb, H/HV  
and V jacks.  
INPUT MENU  
INPUT Menu icon  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT button to move a red frame pointer to  
INPUT Menu icon.  
1
Move a pointer (red arrow) to  
Input 2 and press SELECT  
button.  
Press POINT DOWN button to move a red arrow pointer to Input  
2 and then press SELECT button. Source Select Menu will  
appear.  
Input 2  
2
Source Select Menu  
Move a pointer to RGB and  
press SELECT button.  
Press POINT DOWN button and a red-arrow icon will appear.  
3
Move arrow to "RGB", and then press SELECT button.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER INPUT  
AUTOMATIC MULTI-SCAN SYSTEM  
This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA or UXGA (refer  
to COMPATIBLE COMPUTER SPECIFICATIONon page 27). When selecting Computer, this projector automatically  
tunes to incoming signal and projects proper image without any special setting. (Some computers need setting manually.)  
Note : Projector may display one of following messages.  
When projector cannot recognize connected signal as PC  
system provided in this projector, Auto PC Adjustment  
function operates to adjust projector and message Auto”  
is displayed on SYSTEM Menu icon. (Refer to P28.)  
When image is not provided properly, manual adjustment  
is required. (Refer to P29 and 30.)  
PC SYSTEM MENU  
Auto  
PC SYSTEM Menu icon  
Displays system being  
selected.  
There is no signal input from computer. Make sure  
connection of computer and a projector is set correctly.  
(Refer to TROUBLESHOOTING on page 46.)  
––––  
E
D-VGA, D-SVGA, D-XGA, D-SXGA 1, D-SXGA 2 or D-SXGA 3  
When digital computer signal is received on DVI terminal,  
above message is displayed on PC SYSTEM Menu icon.  
SELECT COMPUTER SYSTEM MANUALLY  
This projector automatically selects PC system among those provided  
in this projector and PC system can be also selected manually.  
PC SYSTEM MENU  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT buttons to move a red frame pointer to PC  
SYSTEM Menu icon.  
1
PC SYSTEM Menu icon  
Displays system being selected.  
Press POINT DOWN button to move a red arrow pointer to  
2
Systems on this dialog box can  
be selected.  
system that you want to set, and then press  
SELECT button.  
Custom Mode (1~5) set in PC  
ADJUST Menu. (P29, 30)  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER INPUT  
COMPATIBLE COMPUTER SPECIFICATIONS  
Basically this projector can accept a signal from all computers with V, H-Frequency mentioned below and less  
than 230 MHz of Dot Clock.  
ON-SCREEN  
DISPLAY  
H-Freq.  
(kHz)  
V-Freq.  
(Hz)  
ON-SCREEN  
DISPLAY  
H-Freq.  
(kHz)  
V-Freq.  
(Hz)  
RESOLUTION  
RESOLUTION  
VGA 1  
VGA 2  
VGA 3  
VGA 4  
VGA 5  
VGA 6  
VGA 7  
MAC LC13  
MAC 13  
RGB  
640 x 480  
720 x 400  
640 x 400  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
640 x 480  
31.47  
31.47  
31.47  
37.86  
37.86  
37.50  
43.269  
34.97  
35.00  
15.734  
15.625  
31.25  
35.156  
37.88  
46.875  
53.674  
48.08  
37.90  
34.50  
38.00  
38.60  
32.70  
38.00  
49.72  
48.36  
68.677  
60.023  
56.47  
60.31  
48.50  
44.00  
63.48  
36.00  
62.04  
61.00  
35.522  
59.88  
70.09  
70.09  
74.38  
72.81  
75.00  
85.00  
66.60  
66.67  
30  
XGA 13  
XGA 14  
XGA15  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1152 x 870  
1152 x 864  
1280 x 1024  
1280 x 1024  
1280 x 1024  
1280 x 1024  
1280 x 1024  
1280 x 1024  
1280 x 1024  
1280 x 1024  
1280 x 960  
1152 x 900  
1152 x 900  
46.90  
47.00  
58.03  
60.24  
68.68  
64.20  
62.50  
63.90  
63.34  
63.74  
71.69  
81.13  
63.98  
79.976  
60.00  
61.20  
71.40  
50.00  
50.00  
63.37  
76.97  
61.85  
46.43  
63.79  
91.146  
75.00  
80.00  
75.00  
81.25  
87.50  
93.750  
45.00  
33.75  
33.75  
31.25  
58.20  
58.30  
72.0  
MAC 19  
MAC 21  
SXGA 1  
SXGA 2  
SXGA 3  
SXGA 4  
SXGA 5  
SXGA 6  
SXGA 7  
SXGA 8  
SXGA 9  
SXGA 10  
SXGA 11  
SXGA 12  
SXGA 13  
SXGA 14  
SXGA 15 1280 x 1024  
SXGA 16 1280 x 1024  
SXGA 17  
SXGA 18  
SXGA 19 1280 x 1024  
SXGA 20 1280 x 1024  
MAC  
MAC  
75.08  
75.06  
70.40  
58.60  
60.00  
59.98  
60.01  
67.19  
76.107  
60.02  
75.025  
60.00  
65.20  
75.60  
43.00  
47.00  
60.01  
72.00  
66.00  
43.35  
60.18  
85.024  
75.08  
75.08  
60.00  
65.00  
70.00  
75.00  
60.00  
30.00  
30.00  
25.00  
E
––––––––  
(Interlace)  
––––––––  
(Interlace)  
––––––––  
RGB  
575p  
25  
50  
(Progressive)  
SVGA 1  
SVGA 2  
SVGA 3  
SVGA 4  
SVGA 5  
SVGA 6  
SVGA 7  
SVGA 8  
SVGA 9  
SVGA 10  
SVGA 11  
MAC 16  
XGA 1  
XGA 2  
XGA 3  
XGA 4  
XGA 5  
XGA 6  
XGA 7  
XGA 8  
XGA 9  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
832 x 624  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
1024 x 768  
56.25  
60.32  
75.00  
85.06  
72.19  
61.03  
55.38  
60.51  
60.31  
51.09  
60.51  
74.55  
60.00  
84.997  
75.03  
70.07  
74.92  
60.02  
54.58  
79.35  
43.59  
77.07  
75.70  
43.48  
1280 x 1024  
(Interlace)  
1280 x 1024  
(Interlace)  
1152 x 900  
1280 x 1024  
(Interlace)  
1280 x 960  
1280 x 1024  
1600 x 1200  
1600 x 1200  
1600 x 1200  
1600 x 1200  
UXGA 1  
UXGA 2  
UXGA 3  
UXGA 4  
720p  
––––––––  
(Progressive)  
––––––––  
(Interlace)  
1024 x 768  
(Interlace)  
1035i  
––––––––  
(Interlace)  
––––––––  
(Interlace)  
XGA 10  
XGA 11  
XGA 12  
1024 x 768  
1024 x 768  
1080i60  
1080i50  
1024 x 768  
(Interlace)  
When a input signal is digital from DVI terminal, refer to chart below.  
ON-SCREEN  
DISPLAY  
H-Freq.  
(kHz)  
V-Freq.  
(Hz)  
ON-SCREEN  
DISPLAY  
H-Freq.  
(kHz)  
V-Freq.  
(Hz)  
RESOLUTION  
RESOLUTION  
D-VGA  
D-SVGA  
D-XGA  
640 x 480  
800 x 600  
1024 x 768  
31.469  
37.879  
48.363  
59.940  
60.317  
60.004  
D-SXGA 1 1280 x 1024  
D-SXGA 2 1280 x 1024  
D-SXGA 3 1280 x 1024  
63.981  
60.276  
31.65  
60.020  
58.069  
29.8  
NOTE : Specifications are subject to change without notice.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER INPUT  
PC ADJUSTMENT  
AUTO PC ADJUSTMENT  
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your  
computer. Auto PC Adjustment function can be operated as follows.  
Auto PC Adj.  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT button to move a red frame pointer to PC  
ADJUST Menu icon.  
PC ADJUST MENU  
1
2
Press POINT DOWN button to move a red frame pointer to  
AUTO PC Adj. icon and then press SELECT button twice.  
This Auto PC Adjustment can be also executed by pressing  
AUTO PC ADJ. button on Top Control or on Remote Control  
Unit.  
PC ADJUST Menu icon  
E
Move a red frame pointer to AUTO PC  
Adj. icon and press SELECT button.  
Store adjustment parameters.  
Adjustment parameters from Auto PC Adjustment can be memorized  
in this projector. Once parameters are memorized, setting can be  
done just by selecting Mode in PC SYSTEM Menu (P26). Refer to  
step 3 of MANUAL PC ADJUSTMENT section (P30).  
NOTE  
Fine sync, Total dots and Picture Position of some computers can  
not be fully adjusted with this Auto PC Adjustment function. When  
image is not provided properly through this function, manual  
adjustments are required. (Refer to page 29, 30.)  
Auto PC Adjustment function cannot be operated in Digital Signal  
input on DVI terminal and RGB, 720p (HDTV), 1035i (HDTV),  
1080i50 (HDTV)or 1080i60 (HDTV)is selected on PC SYSTEM  
Menu (P26).  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER INPUT  
MANUAL PC ADJUSTMENT  
This projector can automatically tune to display signals from most personal computers currently distributed. However, some  
computers employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system  
of this projector. If this happens, projector cannot reproduce a proper image and image may be recognized as a flickering  
picture, a non-synchronized picture, a non-centered picture or a skewed picture.  
This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special  
signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This  
enables you to recall setting for a specific computer whenever you use it.  
Note : This PC ADJUST Menu cannot be operated in Digital Signal input on DVI terminal and RGBis selected on PC  
SYSTEM MENU (P26).  
E
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT button to move a red frame pointer to PC  
ADJUST Menu icon.  
PC ADJUST MENU  
1
2
Press POINT DOWN button to move a red frame pointer to item  
that you want to adjust and then press SELECT button.  
Adjustment dialog box will appear. Press POINT LEFT/RIGHT  
button to adjust value.  
PC ADJUST Menu icon  
Move a red frame icon to item and press  
SELECT button.  
Fine sync  
Adjusts an image as necessary to eliminate flicker from display.  
Press POINT LEFT/RIGHT button to adjust value.(From 0 to 31.)  
Shows status  
Total dots  
(Stored / Free) of  
Selected Mode  
selected Mode.  
Number of total dots in one horizontal period. Press POINT  
LEFT/RIGHT button(s) and adjust number to match your PC image.  
Horizontal  
Adjusts horizontal picture position. Press POINT LEFT/RIGHT  
button(s) to adjust position.  
Press POINT LEFT/RIGHT  
button to adjust value.  
Vertical  
Adjusts vertical picture position. Press POINT LEFT/RIGHT  
button(s) to adjust position.  
Press SELECT button at this icon to  
adjust Clamp,” “Display area (H/V)or  
set Full screen.”  
Current mode  
Press SELECT button to show information of computer selected.  
Clamp  
Current mode  
Adjusts clamp position. When a image has a dark bar(s), try this  
adjustment.  
Press SELECT button at  
Current mode icon to show  
information of computer  
connected.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER INPUT  
Display area  
Selects area displayed with this projector. Select resolution at  
Display area dialog box.  
Press SELECT button at  
Display area icon and Display  
area dialog box appears.  
Display area H  
Adjustment of horizontal area displayed with this projector. Press  
POINT LEFT/RIGHT button(s) to decrease/increase value and then  
press SELECT button.  
Display area  
Display area V  
Adjustment of vertical area displayed with this projector. Press  
POINT LEFT/RIGHT button(s) to decrease/increase value and then  
press SELECT button.  
E
Press POINT LEFT  
/RIGHT button(s) to  
adjust value and then  
press SELECT button.  
Full screen  
Press POINT LEFT/RIGHT button(s) to switch Full screen function to  
Onor Off.Set Onto resize image with 4 x 3 aspect ratio to fit a  
screen.  
NOTE : Display area (H/V) and Full screen cannot be adjusted when  
1035i (HDTV), 1080i50(HDTV)or 1080i60 (HDTV)is  
selected on PC SYSTEM Menu (P26).  
To store adjustment data.  
This Mode has parameters being stored.  
Store  
3
To store adjustment parameters, move a red frame pointer to  
Store icon and then press SELECT button. Move a red arrow  
pointer to any of Mode 1 to 5 that you want to store and then  
press SELECT button.  
Mode free  
To clear adjustment parameters previously set, move a red  
frame pointer to Mode free icon and then SELECT button. Move  
a red arrow pointer to Mode that you want to clear and then  
press SELECT button.  
Vacant Mode  
Store icon  
Shows values of Total dots,”  
Horizontal,” “Vertical,” “Display  
area H,and Display area V.”  
Other icons operates as follows.  
Reset  
Reset all adjust parameters on adjustment dialog box to previous  
figure.  
To clear adjustment data.  
Quit  
Closes PC ADJUST MENU.  
Close this dialog box.  
Mode free icon  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER INPUT  
PICTURE IMAGE ADJUSTMENT  
IMAGE LEVEL SELECT (DIRECT)  
Select image level among Standard, Real, Image 1, Image 2, Image 3  
IMAGE button  
and Image 4 by pressing IMAGE button on Top Control or on Remote  
Control Unit.  
Standard  
Real  
Standard  
Normal picture level preset on this projector.  
Image 1  
Image 2  
Image 3  
Image 4  
Real  
Picture level with improved halftone for graphics.  
E
IMAGE 1~4  
User preset picture adjustment in IMAGE ADJUST Menu (P32).  
IMAGE LEVEL SELECT (MENU)  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT button to move a red frame pointer to  
IMAGE SELECT Menu icon.  
IMAGE SELECT MENU  
1
2
Press POINT DOWN button to move a red frame pointer to level  
that you want to set and then press SELECT button.  
IMAGE SELECT  
Menu icon  
Standard  
Normal picture level preset on this projector.  
Move a red frame icon to level and  
press SELECT button.  
Real  
Picture level with improved halftone for graphics.  
IMAGE 1~4  
Level being selected.  
User preset picture adjustment in IMAGE ADJUST Menu (P32).  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER INPUT  
IMAGE LEVEL ADJUSTMENT  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT buttons to move a red frame pointer to  
IMAGE ADJUST Menu icon.  
IMAGE ADJUST MENU  
1
2
Press POINT DOWN button to move a red frame pointer to item  
that you want to adjust and then press SELECT button. Level of  
each item is displayed. Adjust each level by pressing POINT  
LEFT/RIGHT button(s).  
IMAGE ADJUST  
Menu icon  
Move a red frame pointer to  
item to be selected and then  
press SELECT button.  
Contrast  
Press POINT LEFT button to decrease contrast, and POINT RIGHT  
button to increase contrast. (From 0 to 63.)  
E
Brightness  
Press POINT LEFT button to adjust image darker, and POINT  
RIGHT button to adjust brighter. (From 0 to 63.)  
Selected Image level  
White balance (Red)  
Press POINT LEFT button to lighten red tone and POINT RIGHT  
button to deeper tone. (From 0 to 63.)  
Press POINT LEFT/RIGHT buttons  
to adjust value.  
White balance (Green)  
Press POINT LEFT button to lighten green tone and POINT RIGHT  
button to deeper tone. (From 0 to 63.)  
White balance (Blue)  
Press POINT LEFT button to lighten blue tone and POINT RIGHT  
button to deeper tone. (From 0 to 63.)  
Store icon  
Press SELECT button at this icon to  
store adjustment.  
Sharpness  
Press POINT LEFT button to soften image, and POINT RIGHT  
button to sharpen image. (From 0 to 15.)  
Gamma  
Press either POINT LEFT button or POINT RIGHT button to obtain  
better balance of contrast. (From 0 to 15.)  
Progressive  
Press POINT LEFT/RIGHT button(s) to change progressive scan  
mode. Dialog box display is changed to Offand progressive scan  
mode to off. Press POINT LEFT/RIGHT button(s) again, progressive  
scan mode to on.  
Image Level Menu  
Move a red frame pointer to any  
of Image 1 to 4 where you want  
to set and then press SELECT  
button.  
Store  
3
To store manually preset image, move a red frame pointer to  
Store icon and press SELECT button. Image Level Menu will  
appear. Move a red frame pointer to Image 1 to 4 where you  
want to set and then press SELECT button.  
Other icons operates as follows.  
Reset  
NOTE : Progressive can be operated when  
RGB, 1035i, 1080i50 (HDTV)or  
1080i60 (HDTV)is selected on PC  
SYSTEM MENU (P28 and 29) only.  
Reset all adjustment to previous figure.  
Quit  
Closes IMAGE MENU.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPUTER INPUT  
PICTURE SCREEN ADJUSTMENT  
This projector has a picture screen resize function, which enables you to display desirable image size.  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT button(s) to move a red frame pointer to  
SCREEN Menu icon.  
SCREEN MENU  
1
2
Press POINT DOWN button and move a red frame pointer to  
function that you want to select and then press SELECT button.  
SCREEN Menu icon  
Move a red frame to function and press  
SELECT button.  
Normal  
Provides image to fit screen size.  
True  
E
Provides image in its original size. When original image size is larger  
than screen size (1280 x 1024), this projector enters Digital zoom +”  
mode automatically.  
NOTE  
True and Digital zoom +/cannot be operated  
when RGB, 1035i (HDTV), 1080i50 (HDTV)or  
1080i60 (HDTV)is selected on PC SYSTEM  
Menu (P26).  
Wide  
Provides image to fit wide video aspect ratio (16 : 9) by expanding  
image width uniformly. This function can be used for providing a  
squeezed video signal at 16 : 9.  
Wide cannot be selected when 720p (HDTV),  
1035i (HDTV), 1080i50 (HDTV)or 1080i60  
(HDTV)is selected on PC SYSTEM Menu (P26).  
This projector cannot display any resolution higher  
than 1600 X 1200. If your computers screen  
resolution is higher than 1600 X 1200, reset  
resolution to lower before connecting projector.  
Digital zoom +  
When Digital zoom + is selected, ON-SCREEN MENU disappears  
and message D. Zoom +is displayed. Press SELECT button to  
expand image size. And press POINT UP/DOWN/LEFT/RIGHT  
button(s) to pan image. Panning function can work only when image  
is larger than screen size.  
A projected image can be also expanded by pressing D.ZOOM ✽  
button on Remote Control Unit.  
Image data in other than SXGA (1280 x 1024) is  
modified to fit screen size in initial mode.  
Panning function may not operate properly if  
computer system prepared on PC ADJUST Menu  
is used.  
Digital Zoom –  
When Digital zoom is selected, ON-SCREEN MENU disappears  
and message D. Zoom –” is displayed. Press SELECT button to  
compress image size.  
A projected image can be also compressed by pressing D.ZOOM ✽  
button on Remote Control Unit.  
To cancel Digital Zoom +/mode, press any button except D.ZOOM  
/, SELECT, POINT and AUTO PC ADJ. buttons.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO INPUT  
SELECTING INPUT SOURCE  
WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )  
When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from  
video equipment to R/Pr, G/Y and B/Pb jacks.  
INPUT MENU  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT button to move a red frame pointer to  
INPUT Menu icon.  
INPUT Menu icon  
1
Move a pointer (red arrow) to  
Input 2 and press SELECT  
button.  
Press POINT DOWN button to move a red arrow pointer to Input  
2 and then press SELECT button. Source Select Menu will  
appear.  
2
Input 2  
E
Source Select Menu  
Press POINT DOWN button and a red-arrow icon will appear.  
Move arrow to "Y, Pb/Cb, Pr/Cr" and then press SELECT button.  
3
Move a pointer to  
Y, Pb/Cb, Pr/Cr and press  
SELECT button.  
WHEN SELECT INPUT 3 (AV TERMINAL )  
When connecting to those equipment, select a type of Video  
INPUT MENU  
source in SOURCE SELECT (VIDEO) Menu.  
INPUT Menu icon  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT button to move a red frame pointer to  
INPUT Menu icon.  
1
Move a pointer (red arrow) to  
Input 3 and press SELECT  
button.  
Press POINT DOWN button to move a red arrow pointer to Input  
3 and then press SELECT button. Source Select Menu will  
appear.  
2
Input 3  
Source Select Menu (VIDEO)  
Move a pointer to source and  
press SELECT button.  
Move a pointer to source that you want to select and then press  
SELECT button.  
3
When video input signal is connected to VIDEO jack,  
select Video.  
Video  
When video input signal is connected to S-VIDEO jack,  
select S-Video.  
S-Video  
When video input signal is connected to VIDEO/Y, C  
jacks, select Y, C.  
Y, C  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO INPUT  
SELECTING VIDEO SYSTEM  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT buttons to move a red frame pointer to AV  
SYSTEM Menu icon.  
1
2
Press POINT DOWN button to move a red arrow pointer to  
system that you want to select and then press SELECT button.  
VIDEO JACK OR S-VIDEO JACK  
AV SYSTEM MENU (VIDEO OR S-VIDEO)  
Auto  
Projector automatically detects incoming Video system, and adjusts  
itself to optimize its performance.  
When Video System is PAL-M or PAL-N, select system manually first.  
E
AV SYSTEM Menu icon  
This box indicates system  
being selected.  
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N  
If projector cannot reproduce proper video image, it is necessary to  
select a specific broadcast signal format among PAL, SECAM, NTSC,  
NTSC 4.43, PAL-M, and PAL-N.  
Move pointer to system  
and press SELECT  
button.  
Y, Pb/Cb, Pr/Cr JACKS  
AV SYSTEM MENU (COMPONENT VIDEO)  
Auto  
Projector automatically detects incoming Video signal, and adjusts  
itself to optimize its performance.  
When Video System is 1035i, 1080i50 or 1080i60, select system  
manually first.  
Auto  
AV SYSTEM Menu icon  
This box indicates system  
1080i60  
1080i50  
1035i  
720p  
575p  
480p  
575i  
being selected.  
COMPONENT VIDEO SIGNAL FORMAT  
If projector cannot reproduce proper video image, it is necessary to  
select a specific component video signal format among 480i, 575i,  
480p, 575p, 720p, 1035i , 1080i50 or 1080i60.  
Move pointer to system  
and press SELECT  
button.  
480i  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO INPUT  
PICTURE IMAGE ADJUSTMENT  
IMAGE LEVEL SELECT (DIRECT)  
Select image level among Standard, Cinema, Image 1, Image 2,  
Image 3 and Image 4 by pressing IMAGE button on Top Control or on  
Remote Control Unit.  
IMAGE button  
Standard  
Cinema  
Image 1  
Image 2  
Image 3  
Image 4  
Standard  
Normal picture level preset on this projector.  
Cinema  
Picture level adjusted for picture with fine tone.  
E
IMAGE 1~4  
User preset picture adjustment in IMAGE ADJUST Menu (P38).  
IMAGE LEVEL SELECT (MENU)  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT button to move a red frame pointer to  
IMAGE SELECT Menu icon.  
IMAGE SELECT MENU  
1
2
Press POINT DOWN button to move a red frame pointer to level  
that you want to set and then press SELECT button.  
IMAGE SELECT  
Menu icon  
Standard  
Normal picture level preset on this projector.  
Cinema  
Move a red frame pointer to level  
and press SELECT button.  
Picture level adjusted for picture with fine tone.  
IMAGE 1~4  
Level being selected.  
User preset picture adjustment in IMAGE ADJUST Menu (P38).  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO INPUT  
IMAGE LEVEL ADJUSTMENT  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT button(s) to move a red frame pointer to  
IMAGE ADJUST Menu icon.  
IMAGE ADJUST MENU  
1
2
Press POINT DOWN button to move a red frame pointer to item  
that you want to adjust and then press SELECT button. Level of  
each item is displayed. Adjust each level by pressing POINT  
LEFT/RIGHT button(s).  
IMAGE ADJUST  
Menu icon  
Move a red frame pointer to  
item to be selected and then  
press SELECT button.  
Contrast  
Press POINT LEFT button to decrease contrast, and POINT RIGHT  
button to increase contrast. (From 0 to 63.)  
E
Brightness  
Press POINT LEFT button to adjust image darker, and POINT  
RIGHT button to adjust brighter. (From 0 to 63.)  
Color  
Press POINT LEFT button to lighten color, and POINT RIGHT button  
to deeper color. (From 0 to 63.)  
Press POINT LEFT/RIGHT buttons  
to adjust value.  
Tint  
Press SELECT button at this icon to  
display other items.  
Press POINT LEFT button or POINT RIGHT button to obtain proper  
color. (From 0 to 63.)  
White balance (Red)  
Press SELECT button at this icon to  
display previous items.  
Press POINT LEFT button to lighten red tone and POINT RIGHT  
button to deeper tone. (From 0 to 63.)  
White balance (Green)  
Press POINT LEFT button to lighten green tone and POINT RIGHT  
button to deeper tone. (From 0 to 63.)  
Press POINT LEFT/RIGHT buttons  
to adjust value.  
White balance (Blue)  
Press POINT LEFT button to lighten blue tone and POINT RIGHT  
button to deeper tone. (From 0 to 63.)  
Sharpness  
Press POINT LEFT button to soften image, and POINT RIGHT  
button to sharpen image. (From 0 to 15.)  
Press SELECT button at this icon to  
store value.  
Gamma  
Press either POINT LEFT button or POINT RIGHT button to obtain  
better balance of contrast. (From 0 to 15.)  
NOTE :  
Tint cannot be adjusted when video system is PAL,  
SECAM, PAL-M or PAL-N.  
Noise reduction  
Press POINT LEFT/RIGHT button(s) to change noise reduction mode.  
Dialog box display is changed to Onto reduce noise (rough parts) of  
Noise Reduction cannot be operated when video  
signal types and systems as follow.  
image. Press POINT LEFT/RIGHT button(s) again, to change noise Composite video signal (SECAM, NTSC4.43,  
PAL-M and PAL-N systems).  
reduction mode to off.  
Y/C separate video and S-video signal (SECAM,  
Progressive scan  
PAL-M and PAL-N systems).  
Component video signal.  
Press POINT LEFT/RIGHT button(s) to change progressive scan  
mode. Dialog box display is changed to Offand progressive scan  
mode to off. Press POINT LEFT/RIGHT button(s) again, progressive  
scan mode to on.  
Progressive cannot be operated when 480p,  
575por 720pis selected on AV SYSTEM  
MENU (P35).  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VIDEO INPUT  
Store  
3
To store adjustment data, move a red frame pointer to Store icon  
and press SELECT button. Image Level Menu will appear.  
Move a red frame pointer to Image Level 1 to 4 and then press  
SELECT button.  
Image Level Menu  
Other icons operates as follows.  
Move a red frame pointer to  
image icon to be set and  
then press SELECT button.  
Reset  
Reset all adjustment to previous figure.  
E
Quit  
Store icon  
Closes IMAGE MENU.  
PICTURE SCREEN ADJUSTMENT  
This projector has a picture screen resize function, which enables you to display desirable image size.  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT button(s) to move a red frame pointer to  
SCREEN Menu icon.  
SCREEN MENU  
1
2
Press POINT DOWN button and move a red frame pointer to  
function that you want to select and then press SELECT button.  
SCREEN Menu icon  
Move a red frame to function and press  
Normal  
SELECT button.  
Provides image at a normal video aspect ratio of 4 : 3.  
NOTE : SCREEN Menu cannot be operated when  
720p, 1035i, 1080i50or 1080i60is  
selected on AV SYSTEM Menu (P35).  
Wide  
Provides image at a wide screen ratio of 16 : 9.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING  
SETTING MENU  
Press MENU button and ON-SCREEN MENU will appear. Press  
POINT LEFT/RIGHT button(s) to move a red-frame pointer to  
SETTING icon.  
SETTING MENU  
1
2
Press POINT DOWN button to move a red-frame pointer to item  
Set a red frame  
SETTING Menu icon  
pointer to item and  
press SELECT  
button.  
that you want to set and then press  
SELECT button. Setting  
dialog box appears.  
Language  
Language used in ON-SCREEN MENU is selectable from among  
English, German, French, Italian, Spanish, Portuguese, Dutch,  
Swedish, Chinese, Korean and Japanese.  
E
Keystone  
When image is distorted vertically, select Keystone. ON-SCREEN  
MENU disappears and Keystone dialog box is displayed.  
Correct keystone distortion by pressing POINT UP/DOWN button(s).  
Refer to KEYSTONE ADJUSTMENT on page 22.  
When pressing SELECT  
button at Language,  
Language Menu appears.  
Blue back  
When this function is On,this projector will produce a blue image  
instead of video noise on screen when any input source is unplugged  
or turned off.  
Display  
This function decides whether to display On-Screen Displays.  
On ··· shows all On-Screen Displays.  
Off ···· sets On-Screen Displays disappeared except;  
ON-SCREEN MENU  
Power off?message  
Move a pointer to item and  
then press POINT  
LEFT/RIGHT button(s).  
Optional Control Number  
Refer to page 11.  
Logo  
When this function is On,projector displays our logo when starting  
up.  
Ceiling  
Ceiling function  
Rear function  
When this function is On,picture is top/bottom and left/right  
reversed. This function is used to project image from a ceiling  
mounted projector.  
Rear  
When this function is On,picture is left/right reversed. This function  
is used to project image to a rear projection screen.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING  
Power management  
This function turns Projection Lamp off when this projector detects  
signal interruption and is not used for a certain period in order to  
reduce power consumption and maintain Lamp-life. (This projector is  
shipped with this function ON.)  
Time left until Lamp off.  
Power Management function operates to turn Projection Lamp off  
when input signal is interrupted and any button is not pressed over 5  
minutes. This function operates as follows;  
1. When any input signal is interrupted, No signaland counting  
down display appears (for 5 minutes).  
2. After counting down for 5 minutes, projector lamp and READY  
indicator are turned off.  
E
3. When READY indicator flashing, Projection Lamp can be  
turned on again (Power Management mode).  
In this Power Management mode, Projection Lamp is  
automatically turned on when input signal connected or  
projector is operated with any button on Top Control or on  
Remote Control Unit again.  
Press SELECT button at this icon to  
display other items.  
On start  
On start  
When this function is On,projector is automatically turned on just  
by switching MAIN ON/OFF SWITCH on.  
Press SELECT button at this icon to  
display previous items.  
Note ; Be sure to turn projector off properly (refer to section  
TURNING OFF PROJECTORon P21). If projector is turned  
off in wrong steps, On Start function does not operate  
properly.  
Move pointer to item and then press  
POINT LEFT/RIGHT button(s).  
Lamp Mode  
This Projector is equipped with 2 Projection Lamps and a number of using lamps can be switched to 2 lamps or 1 lamp.  
Using 1 lamp maintain life of Projection Lamps.  
To change over Lamp Mode  
1. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to select SETTING and  
press SELECT button. Setting dialog box appears.  
2. Press POINT DOWN button to move a red frame pointer to Lamp mode. Set "2 lamps mode" or "1 lamp mode" by  
pressing POINT LEFT/RIGHT button(s). When Lamp Mode is set from "2 lamps mode" to "1 lamp mode" image  
becomes little darker. When Lamp Mode is set from "1 lamp mode" to "2 lamps mode" image become brighter  
gradually.  
NOTE : After changing Lamp Mode, it cannot be switched again for 90 seconds.  
Remote control  
This projector has two different remote control codes; factory-set normal code (Code 1) and secondary code (Code 2). This  
switching function prevents remote control operation mixture (jam) when operating several projectors or video equipment  
together.  
When operating projector in Code 2,both projector and Remote Control Unit must be switched to Code 2.”  
To change code of Projector;  
Set Remote control in SETTING MENU to Code 2.”  
To change code of Remote Control Unit;  
Press both MENU and IMAGE buttons on Remote Control Unit together for over 10 seconds.  
After changing code, make sure Remote Control operates properly.  
To return to normal code (Code 1), operate both projector and Remote Control in ways above again.  
NOTE : When batteries of Remote Control Unit are replaced or ALL-OFF switch is turned to ALL-OFF,remote transmit  
code automatically returns to normal code (Code 1).  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETTING  
USB  
This Projector is equipped with USB port for interactive operation  
between a projector and computer. Set mode following steps below.  
USB  
Wireless Mouse mode  
Press SELECT button at this icon to  
display previous items.  
Select "  
" when controlling a computer with Remote Control of  
this projector.  
Projector mode  
Select "  
" when controlling a projector with computer.  
Move a pointer to item and then  
press POINT LEFT/RIGHT  
button(s).  
E
NOTE: Before you control a projector by computer, install USB driver  
(optionally sold parts) and set up computer following instruc-  
tion in USB driver package. Contact your authorized dealer.  
Lamp counter reset  
Be sure to reset Lamp Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP  
REPLACE indicator stops lighting.  
Turn projector on, press MENU button and ON-SCREEN  
MENU will appear. Press POINT LEFT/RIGHT button(s) to  
move a red frame pointer to SETTING Menu icon.  
1
Press POINT DOWN button to move a red frame pointer to  
2
Lamp counter resetand then press  
SELECT button.  
Move arrow to replaced lamp number (Lamp 1 or Lamp 2) and  
3
then press  
SELECT button. Message "Lamp replace counter  
1
2
Move pointer to Lamp counter reset and then  
press SELECT button. Move arrow to  
replaced lamp number (Lamp 1 or Lamp  
Reset?" is displayed. Move pointer to [Yes] and then press  
SELECT button.  
NOTE: Be sure to reset correct lamp number otherwise LAMP  
2) and then press  
SELECT button.  
REPLACE indicator continues lighting.  
Another confirmation dialog box appears and select [Yes] to  
reset Lamp Replace Counter.  
4
Do not reset Lamp Replace Counter except after Projection lamp is  
replaced.  
Quit  
Closes SETTING MENU.  
Message "Lamp replace counter Reset?" is  
displayed. Move pointer to [Yes] and then  
press SELECT button.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
OPERATING WIRELESS MOUSE  
Wireless Remote Control Unit is not only able to operate this projector but also usable as a wireless mouse for most  
Personal Computers. POINT buttons and two CLICK buttons are used for wireless mouse operation.  
This Wireless Mouse function is available only when PC mouse pointer is displayed on a projected screen. When ON-  
SCREEN MENU or any message / dialog box is displayed on screen instead of PC mouse pointer, this Wireless Mouse  
function cannot be used.  
INSTALLATION  
To use Wireless Remote Control Unit as Wireless Mouse for a Personal Computer, installation of mouse driver (not supplied)  
is required. Make sure that mouse driver is properly installed in your computer. And make sure that mouse port (or USB  
port) of a Personal Computer is activated.  
E
Connect mouse port (or USB port) of your computer to Control  
Port (or USB connector) of this projector with Control Cable (or  
USB cable). (Refer to page 13, 14 for connection.)  
Note : When your computer has no mouse  
1
port, connect Serial Port of your  
computer to Control Port of a projector  
with Control Cable for Serial Port (not  
supplied).  
Turn a projector on first, and then turn on your computer. When  
computer is switched on first, Wireless Mouse may not work  
properly.  
2
OPERATING WIRELESS MOUSE  
When controlling a PC mouse pointer, operate Wireless Mouse with POINT button, SELECT button, and RIGHT CLICK  
button on Wireless Remote Control Unit.  
POINT button (Move pointer)  
POINT button  
Used to move PC mouse pointer. Pointer is moved corresponding  
with direction you are pressing.  
SELECT (LEFT CLICK) button  
This button has same function as left button in a PC mouse.  
RIGHT CLICK button  
This button has same function as right button in a PC mouse. This  
button is not available for controlling this projector.  
SELECT button  
(left button of mouse)  
RIGHT CLICK button  
(right button of mouse)  
MAINTENANCE  
WARNING TEMP. INDICATOR  
WARNING TEMP. Indicator flashes red when an internal temperature of a projector exceeds normal temperature. This  
Indicator stops flashing when temperature of a projector returns to normal.  
When WARNING TEMP. Indicator continues to flash, check items listed below.  
Ventilation Slots of a projector may be blocked. In such an event, reposition a projector so that Ventilation Slots are  
not obstructed.  
1
Air Filter may be clogged with dust particles. Clean Air Filter by following section AIR FILTER CARE AND CLEANING  
on next page.  
2
If WARNING TEMP. Indicator remains on after performing above checks, Cooling Fans or Internal Circuits may be  
malfunctioning. Contact service personnel from an authorized dealer or a service station.  
3
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
AIR FILTER CARE AND CLEANING  
Air Filter prevents dust from accumulating on a surface of Projection Lens and Projection Mirror. Should Air  
Filter become clogged with dust particles, it will reduce Cooling Fans' effectiveness and may result in internal  
heat build up and adversely affect life of projector.  
Clean Air Filter following steps below:  
Turn power off, and disconnect AC power cord from  
an AC outlet.  
1
CAUTION  
Do not operate a projector with Air Filter  
removed. Dust may accumulate on LCD  
Panel and Mirror degrading picture quality.  
Do not put small parts into Air Intake Vents.  
It may result in malfunction of a projector.  
Pull out 2 Air Filters and Air filter Covers from a  
projector.  
2
3
Clean each parts (Air Filter and Air filter Cover) with  
brush or wash out dust and particles. Be sure to dry  
them out.  
E
Replace Air Filter and Air Filter Cover properly. Make  
sure that they are fully inserted.  
4
BOTTOM OF PROJECTOR  
SIDE OF PROJECTOR  
AIR FILTER  
COVER  
AIR FILTER  
COVER  
AIR FILTER  
AIR FILTER  
RECOMMENDATION  
We recommend avoiding dusty/smoky environments when operating a projector. Usage in these  
environments may cause poor image quality.  
When using under dusty or smoky conditions, dust may accumulate on liquid crystal panel, lens, or optical elements inside it.  
This condition may degrade quality of projected image.  
When above symptoms are noticed, contact your authorized dealer or service station for proper cleaning.  
CLEANING PROJECTION LENS  
Follow these steps to clean projection lens:  
Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner.  
Abrasive cleaners, solvents or other harsh chemicals might scratch lens.  
1
Lightly wipe cleaning cloth over lens.  
2
3
When a projector is not in use, replace lens cover.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
LAMP MANAGEMENT  
This Projector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled by Lamp  
Management Function. Lamp Management Function detects status of two lamps and shows status on screen or on LAMP  
REPLACE indicator. This function also automatically controls Lamp Mode when any of lamps is out for end of life or  
malfunctions.  
LAMP STATUS  
INPUT 1  
1
2
30  
E
LAMP REPLACE  
INDICATOR  
Lamp Replace Indicator  
This LAMP REPLACE indicator lights yellow when any of Projection Lamps is nearing its end, and flashes when any of them  
becomes out. Check number of lamp on Lamp Status Display and replace lamp.  
Lamp Status Display  
Lamp Status Display appears on screen when power switch is on or changed input position (input 1, input 2 or input 3).  
This shows status of each lamp as; ON, OFF, NEAR END, or OUT. Refer to following for each status.  
Yellow Lamp  
Dim Lamp  
Projection Lamp lights normally.  
Projection Lamp is turned off.  
1
2
Projection Lamp is nearing its end. When image becomes  
darker or color becomes unnatural, replace lamp.  
(LAMP REPLACE indicator lights yellow.)  
Red Lamp  
LAMP STATUS  
DISPLAY  
(LAMP REPLACE indicator flashes yellow.)  
X Mark on Lamp  
Projection lamp is defective or fails to be turned on. Restart a  
projector on, and make sure lamp is on. If this mark still  
appears, replace lamp corresponding with number marked X.  
Lamp Mode Changeover  
Lamp Management Function automatically changes combination of lighting lamp (Lamp Mode) by detecting status of lamp.  
When any of 2 lamps becomes out, Lamp Mode is changed over from 2 lamps to 1 lamp. Lamp Mode can be switched to 2  
lamps or 1 lamp manually. Refer to SETTING section on page 39, 40.  
2
1
1
2
1
2
2 LAMP MODE  
1 LAMP MODE  
(Example)  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
LAMP REPLACEMENT  
CAUTION  
CAUTION  
For continued safety, replace with a lamp  
Do not drop a lamp assembly or touch a glass  
assembly of same type.  
bulb! Glass can shatter and may cause injury.  
Allow a projector to cool for at least 45  
minutes before you open Lamp Cover. Inside  
of a projector can become very hot.  
Follow these steps to replace lamp assembly.  
Check number of lamp to be replaced on Lamp Status  
Display.  
SCREWS  
1
2
E
Turn off a projector and disconnect AC Power Cord. Allow a  
projector to cool for at least 45 minutes.  
Loosen 3 screws on Lamp Cover and remove Lamp Cover.  
(See right figure.)  
3
4
5
6
7
8
LAMP  
COVER  
Loosen 2 screws and pull out Lamp Assembly to be replaced  
by grasping handle.  
LAMP 1  
Replace Lamp Assembly with a new one and tighten 2 screws.  
Make sure that Lamp Assembly is set properly  
LAMP 2  
Replace Lamp Cover and tighten 3 screws.  
Connect AC Power Cord to a projector and turn projector on.  
SCREWS  
Reset Lamp Replacement Counter. (Refer to section "Lamp  
Counter Reset" on page 41.)  
Make sure which number of lamp needs to be  
replaced on Lamp Status Display.  
Figure shows case of replacing LAMP 2.  
NOTE : Do not reset LAMP REPLACEMENT COUNTER  
when lamp is not replaced.  
CAUTION : DO NOT OPERATE A PROJECTOR WHILE ANY OF LAMPS IS REMOVED. IT MAY  
RESULT IN MALFUNCTIONS, FIRE HAZARD, OR OTHER ACCIDENTS.  
NOTES ON LAMP REPLACEMENT  
To maintain quality of picture (better balance of color and brightness in entire screen), we recommend replacing  
all 2 lamps at a time.  
ORDER REPLACEMENT LAMP  
Replacement Lamp can be ordered through your dealer. When ordering Projection Lamp, give following  
information to dealer.  
Model No. of your projector : Pro AV 9550  
Replacement Lamp Type No. : Proxima Lamp No.; LAMP-033  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
TROUBLESHOOTING  
Before calling your dealer or service center for assistance, check matters below once again.  
1. Make sure you have connected a projector to your computer or video equipment as described in section "CONNECTING  
PROJECTOR" on pages 12 ~ 15.  
2. Check cable connection. Verify that all computer, video and power cord are properly connected.  
3. Verify that all power is switched on.  
4. If a projector still does not produce an image, re-start your computer.  
5. If an image still does not appear, unplug a projector from your computer and check your computer monitor's  
display.Problem may be with your graphics controller rather than with a projector. (When you reconnect a projector, be  
sure to turn a computer and monitor off before you power up a projector. Power equipment back on in order of : Projector  
and computer.)  
6. If problem still exists, check following chart.  
E
Problem:  
No power.  
Try these Solutions  
Plug a projector into your AC outlet.  
Turn MAIN ON/OFF switch to ON.  
Press POWER ON/OFF switch to ON.  
Make sure READY Indicator lights.  
Wait 90 seconds after a projector is turned OFF when turning a projector back on.  
NOTE : After pressing Power ON-OFF button to OFF, make sure a projector works as  
follows:  
1. LAMP indicator lights bright and READY indicator turns off.  
2. After 90 seconds, READY indicator lights green again and a projector may be  
turned on by pressing Power ON-OFF button.  
Check WARNING TEMP. indicator. If indicator flashes red, a projector cannot be turned  
on.  
(See "TURNING ON/OFF PROJECTOR" section on page 21.)  
Check Projection Lamp. (Refer to page 45.)  
Adjust focus of a projector.  
Check Projection Lens to see if it needs cleaning.  
Image is out of  
focus.  
NOTE : Moving a projector from a cool temperature location to a warm temperature location  
may result in moisture condensation on Projection Lens. In such an event, leave a  
projector OFF and wait until condensation disappears.  
Check Ceiling / Rear feature. (See SETTINGsection on page 39.)  
Picture is Left/Right  
reversed.  
Check Ceiling feature. (See SETTINGsection on page 39.)  
Picture is  
Top/Bottom  
reversed.  
Check Display feature.(See SETTINGsection on page 39.)  
Some displays are  
not seen during  
Operation.  
Check connection between your computer or video equipment and a projector.  
When turning a projector on, it takes about 30 seconds to display an image.  
Check system that you select is corresponding with your computer or video equipment.  
Make sure temperature is not out of Operating Temperature (5°C ~ 35°C).  
No image.  
Check audio cable connection from audio input source.  
Adjust audio source.  
No sound.  
Press VOLUME (+) button.  
Press MUTE button.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
Problem:  
Remote Control Unit  
does not work.  
Try these Solutions  
Check batteries.  
Check ALL-OFF switch on Remote Control Unit is set to ON..  
Make sure nothing is between Infrared Remote Receiver and Remote Control Unit.  
Make sure you are not too far from a projector when using Remote Control Unit.  
Maximum operating range is 16.4(5m).  
Check transmitted signal mode from Remote Control Unit.  
(See SETTINGsection on page 40.)  
Check cable connection between a projector and your computer.  
Check mouse setting on your computer.  
Turn a projector on before turning on a computer.  
Wireless Mouse  
function does not  
work.  
E
Where to Get Help :  
If you still need help after checking the table above, you should call your dealer's technical support line and  
explain your problem.  
If your dealer cannot solve your problem, please call InFocus Corporation's Technical Support directly at 1-800-  
799-9911. Support is free between 6 a.m. and 6 p.m. PST, Monday through Friday. Support is available in North  
America after hours and weekends for a fee at 1-888-592-6800. Or, send us an e-mail at  
In Europe, call InFocus in The Netherlands at (31) 35-6474010.  
In Asia, call InFocus in Singapore at (65) 353-9449. Or, send us an e-mail at [email protected].  
In the event that your unit is determined to be defective, you'll be issued a Return Authorization Number.  
After you've received this number, send the unit, a copy of your sales receipt, and a description of the problem,  
freight prepaid, to Proxima. Clearly note the Return Authorization Number on the outside of the shipping box.  
This symbol on the nameplate means the product is Listed by Underwriters  
Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety  
standards against risk of fire, casualty and electrical hazards.  
The CE Mark is a Directive conformity mark of the European Community (EC).  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
TECHNICAL SPECIFICATIONS  
Multi-media Projector  
Projector Type  
17.3" x 9.1" x 23.8" (439 mm x 230 mm x 605.6 mm)  
45.2 lbs (20.5 kg)  
(W x H x D)  
Dimensions  
Net Weight  
1.8" TFT Active Matrix type, 3 panels  
1280 x 1024 dots  
LCD Panel System  
Panel Resolution  
Number of Pixels  
Color System  
3,932,160 (1280 x 1024 x 3 panels)  
PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N  
480i, 480p, 575i, 575p, 720p, 1035i, 1080i-50 and 1080i-60  
Up and Down  
High Definition TV Signal  
Motorized Lens Shift  
Scanning Frequency  
Horizontal Resolution  
Projection Lamp  
Input 1 Jacks  
H-sync. 15 ~ 120 KHz, V-sync. 50 ~ 120 Hz  
800 TV lines  
E
200 watt type x 2  
DVI-I Terminal (Digital/Analog), RCA Type (Audio R and L)  
and DIN 8-pin (Control port)  
BNC Type x 5 (R/Pr, G/Y, B/Pb, H/HV and V), RCA Type (Audio R and L)  
and DIN 8-pin (Control port)  
Input 2 Jacks  
Input 3 Jacks  
Other Jacks  
BNC Type x 2 (VIDEO/Y, C), RCA Type (Audio R and L)  
and DIN 4-pin (S-Video)  
Serial port in (DB 9), Serial port out (DB 9), USB port,  
Audio Monitor out (RCA Type R and L) and Wired Remote Jack  
INT. SP. Stereo (R and L), 3 watt RMS (T.H.D. 10%)  
Built-in Speakers  
0˚ to 6.9˚  
Feet Adjustment  
Voltage and  
Power Consumption  
Operating Temperature  
AC 100 ~ 120 V (7.8 A Max. Ampere), 50 / 60 Hz (The U.S.A and Canada)  
AC 200 ~ 240 V (3.3 A Max. Ampere), 50 / 60 Hz (Continental Europe)  
41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)  
14 ˚F ~ 140 ˚F (-10 ˚C ~ 60 ˚C)  
Storage Temperature  
Power Source  
Operating Range  
Dimensions  
Net Weight  
Laser Pointer  
:
:
:
:
:
AA, UM3 or R06 Type x 2  
16.4(5m) / ±30˚  
2.2x 1.3x 7.6(55mm x 34mm x 192mm)  
0.36 lbs (165 g) (including batteries)  
(Max. Output : 1mW / Wave length : 650±20nm)  
Class II Laser  
Remote Control Transmitter  
Users Guide  
Accessories  
AC Power Cord  
Wireless/Wired Remote Control Transmitter and Batteries  
Remote Control Cable  
VGA Cable and DVI Cable  
MAC/VGA Adapter and DVI/VGA Adapter  
3 Types Control Cable (For PS/2, Serial and ADB port)  
3 Types Light-Block Sheet (For option lens)  
Lens Mounting Adapter  
Protective Dust Cover  
Specifications are subject to change without notice.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
CONFIGURATIONS OF TERMINALS  
DVI-I TERMINAL (DIGITAL/ANALOG)  
This terminal accepts only Digital (TMDS) or Analog (RGB) output signal. Connect display output terminal of computer to this  
terminal with DVI cable (supplied).  
Pin Configuration  
C1 Analog Red Input  
C2 Analog Green Input  
C1 C2  
C3 Analog Blue Input  
C4 Analog Horiz. sync  
C5 Analog Ground (R/G/B)  
1
9
2
3
4
5
6
7
8
E
10 11 12 13 14 15 16  
1
2
3
4
5
6
7
8
T.M.D.S. Data2–  
9
T.M.D.S. Data1–  
17 T.M.D.S. Data0–  
17 18 19 20 21 22 23 24  
T.M.D.S. Data2+  
10 T.M.D.S. Data1+  
18 T.M.D.S. Data0+  
T.M.D.S. Data2 Shield 11 T.M.D.S. Data1 Shield 19 T.M.D.S. Data0 Shield  
No Connect  
No Connect  
DDC Clock  
12 No Connect  
13 No Connect  
14 +5V Power  
20 No Connect  
C3 C4  
C5  
21 No Connect  
22 T.M.D.S. Clock Shield  
23 T.M.D.S. Clock+  
24 T.M.D.S. Clock–  
DDC Data  
15 Ground (for +5V)  
16 Hot Plug Detect  
Analog Vert. sync  
CONTROL PORT CONNECTOR  
Terminal : Mini DIN 8-PIN  
Connect control port (PS/2, Serial or ADB port) on your computer to this terminal with Control Cable (supplied).  
PS/2  
-----  
Serial  
R X D  
-----  
ADB  
-----  
Pin Configuration  
1
2
3
4
5
6
7
8
CLK  
DATA  
GND  
-----  
ADB  
-----  
-----  
8
7
6
GND  
RTS  
GND  
-----  
5
4
3
2
1
-----  
T X D  
GND  
GND  
-----  
GND  
-----  
-----  
GND  
SERIAL PORT IN/OUT TERMINAL  
Pin Configuration  
Connect serial port output terminal of computer to this terminal with Serial Cable (not supplied).  
1
2
3
4
5
6
7
8
9
-----  
RxD  
TxD  
-----  
5 4 3 2 1  
9 8 7 6  
Ground  
-----  
-----  
-----  
-----  
USB PORT TERMINAL  
Pin Configuration  
1
2
3
4
Vcc  
- Data  
+ Data  
Ground  
2
3
1
4
Connect USB port output terminal of computer or peripheral  
equipment to this terminal with USB port Cable (not supplied).  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
Limited Warranty  
,Q)RꢀXV&RUSRUDWLRQ´,Q)RꢀXVµꢃZDUUDQWVWKDWꢁWKHꢁ3URMHꢀWRUꢁꢂ´3URGXꢀWµꢃꢁSXUꢀKDVHGIURP,Q)RꢀXVꢄDQ  
,Q)RꢀXVGLVWULEXWRUꢄRUDQ,Q)RꢀXVUHVHOOHUZLOORQIRUPWRWKHPDQXIDꢀWXUHUꢅVVSHꢀLILꢀDWLRQVDQGEHIUHHIURP  
GHIHꢀWVꢁLQꢁPDWHULDOꢁRUꢁZRUNPDQVKLSꢁIRUꢁWKHꢁ:DUUDQW\ꢁSHULRGꢁSURYLGHGꢁEHORZꢆꢁ,Q)RꢀXVꢁGRHVꢁQRWꢁZDUUDQWꢁWKDWꢁWKH  
3URGXꢀWꢁZLOOꢁPHHWꢁWKHꢁVSHꢀLILꢀꢁUHTXLUHPHQWVꢁRIꢁWKHꢁHQGꢇXVHUꢁꢀXVWRPHUꢆꢁ  
,IꢁWKHꢁ3URGXꢀWꢄꢁZKLꢀKꢁLVꢁWKHꢁVXEMHꢀWꢁRIꢁWKLVꢁ/LPLWHGꢁ:DUUDQW\ꢄꢁLVꢁGHIHꢀWLYHꢁLQꢁPDWHULDOꢁRUꢁZRUNPDQVKLS  
GXULQJꢁWKHꢁZDUUDQW\ꢁSHULRGꢄꢁ,Q)RꢀXVꢄꢁDWꢁLWVꢁRSWLRQꢄꢁZLOOꢁ5(3$,5ꢁRUꢁ5(3/$&(ꢁWKHꢁ3URGXꢀWꢆꢁ  
$OOꢁH[ꢀKDQJHGꢁSDUWVꢁDQGꢁSURGXꢀWVꢁUHSODꢀHGꢁXQGHUꢁWKLVꢁ:DUUDQW\ꢁZLOOꢁEHꢀRPHꢁSURSHUW\ꢁRIꢁ,Q)RꢀXVꢆꢁ,Q)Rꢇ  
ꢀXV·ꢁVROHꢁREOLJDWLRQꢁLVꢁWRꢁVXSSO\ꢁꢂRUꢁSD\ꢁIRUꢃꢁDOOꢁODERUꢁQHꢀHVVDU\ꢁWRꢁUHSDLUꢁWKHꢁ3URGXꢀWꢁIRXQGꢁWRꢁEHꢁGHIHꢀWLYHꢁZLWKLQ  
WKHꢁ:DUUDQW\ꢁSHULRGꢁDQGꢁWRꢁUHSDLUꢁRUꢁUHSODꢀHꢁGHIHꢀWLYHꢁSDUWVꢁZLWKꢁQHZꢁSDUWVꢁRUꢄꢁDWꢁWKHꢁRSWLRQꢁRIꢁ,Q)RꢀXVꢄꢁVHUYLꢀHꢇ  
DEOHꢁXVHGꢁSDUWVꢁWKDWꢁDUHꢁHTXLYDOHQWꢁRUꢁVXSHULRUꢁWRꢁQHZꢁSDUWVꢁSHUIRUPDQꢀHꢆ  
Limited Warranty Alternatives: 6XEMHꢀWWRWKHꢁ/LPLWDWLRQVꢄꢁ([ꢀOXVLRQVꢁDQG'LVꢀODLPHUVꢄ,Q)RꢀXV:DUꢇ  
UDQWVꢁDVꢁIROORZVꢈ  
E
2 Year Parts and Labor Product Warrantyꢁꢇꢁ)URPꢁWKHꢁGDWHꢁRIꢁSXUꢀKDVHꢄꢁ,Q)RꢀXVꢁZDUUDQWVꢁWKDWꢁWKHꢁ3URGXꢀW  
ZLOOꢁꢀRQIRUPꢁWRꢁWKHꢁPDQXIDꢀWXUHUV·ꢁVSHꢀLILꢀDWLRQVꢁDQGꢁEHꢁIUHHꢁIURPꢁGHIHꢀWVꢁLQꢁPDWHULDOꢁRUꢁZRUNPDQVKLSꢁIRUꢁD  
SHULRGꢁRIꢁWZRꢁꢂꢉꢃꢁ\HDUVꢆ  
1 Year Parts Only Accessory Warrantyꢁꢇꢁ)URPꢁWKHꢁGDWHꢁRIꢁSXUꢀKDVHꢄꢁ,Q)RꢀXVꢁZDUUDQWVꢁWKDWꢁWKHꢁꢀXVWRPHU  
UHSODꢀHDEOHꢁDQGꢁDꢀꢀHVVRU\ꢁSURGXꢀWVꢁZLOOꢁꢀRQIRUPꢁWRꢁWKHꢁPDQXIDꢀWXUHUV·ꢁVSHꢀLILꢀDWLRQVꢁDQGꢁEHꢁIUHHꢁIURPꢁGHIHꢀWVꢁLQ  
PDWHULDOꢁRUꢁZRUNPDQVKLSꢁIRUꢁDꢁSHULRGꢁRIꢁRQHꢁꢂꢊꢃꢁ\HDUꢆꢁ  
90 Day/500 Hour Replacement Lamp Warranty ꢇꢁ/DPSꢁ3URGXꢀWVꢁSXUꢀKDVHGꢁLQꢁSURMHꢀWRUVꢁRUꢁVHSDUDWHO\ꢁDV  
UHSODꢀHPHQWVꢁDIWHUꢁWKHꢁRULJLQDOꢁSURMHꢀWRUꢁSXUꢀKDVHVꢁLVꢁ1LQHW\ꢁꢂꢋꢌꢃꢁGD\VꢁRUꢁꢍꢌꢌꢁKRXUVꢄꢁZKLꢀKHYHUꢁꢀRPHVꢁILUVWꢆꢁ9ˆꢀꢁ  
vtꢂ‡urꢂXhꢀꢀh‡’ꢂƒrꢀv‚qꢂs‚ꢀꢂ‡urꢂQꢀ‚qˆp‡ꢃꢂDA‚pˆ†ꢂhꢀꢀh‡†ꢂ‡uh‡ꢂSrƒyhpr€r‡ꢂyh€ƒ†ꢃꢂuvpuꢂhꢀrꢂƒˆꢀpuh†rqꢂh‡ꢂ‡urꢂ‡v€rꢂ‚sꢂƒꢀ‚ꢁ  
wrp‡‚ꢀꢂƒˆꢀpuh†rꢃꢂvyyꢂuh‰rꢂhꢂ(ꢄꢁqh’ꢂ‚ꢀꢂ$ꢄꢄꢂu‚ˆꢀꢂhꢀꢀh‡’ꢃꢂuvpur‰rꢀꢂp‚€r†ꢂsvꢀ†‡ꢃꢂsꢀ‚€ꢂ‡urꢂqh‡rꢂ‡urꢂ†ƒhꢀrꢂyh€ƒꢂv†ꢂƒˆ‡ꢂv‡‚ꢂˆ†rꢅ  
WARRANTY LIMITATION AND EXCLUSION  
7+,6ꢁ:$55$17<ꢁ6(76ꢁ)257+ꢁ,1)2&86·ꢁ0$;,080ꢁ/,$%,/,7<ꢁ)25ꢁ,76ꢁ352'8&7ꢆꢁ7+,6ꢁ:$5ꢇ  
5$17<ꢁ(;7(1'6ꢁ21/<ꢁ72ꢁ352'8&76ꢁ385&+$6('ꢁ)520ꢁ,1)2&86ꢁ25ꢁ$1ꢁ,1)2&86ꢁ$87+25,=('  
5(6(//(5ꢆꢁ,Q)RꢀXVꢁVKDOOꢁKDYHꢁQRꢁIXUWKHUꢁREOLJDWLRQꢁXQGHUꢁWKHꢁIRUHJRLQJꢁ/LPLWHGꢁ:DUUDQW\ꢁLIꢁWKHꢁ3URGXꢀWꢁKDV  
EHHQꢁGDPDJHGꢁGXHꢁWRꢁDEXVHꢄꢁPLVXVHꢄꢁQHJOHꢀWꢄꢁVPRNHꢁH[SRVXUHꢁꢂꢀLJDUHWWHꢁRUꢁRWKHUZLVHꢃꢄꢁDꢀꢀLGHQWꢄꢁXQXVXDOꢁSK\VLꢀDO  
RUꢁHOHꢀWULꢀDOꢁVWUHVVꢄꢁXQDXWKRUL]HGꢁPRGLILꢀDWLRQVꢁꢂLQꢀOXGLQJꢁXVHꢁRIꢁDQꢁXQDXWKRUL]HGꢁPRXQWꢃꢄꢁWDPSHULQJꢄꢁDOWHUDWLRQVꢄ  
RUꢁVHUYLꢀHꢁRWKHUꢁWKDQꢁE\ꢁ,Q)RꢀXVꢁRUꢁLWVꢁDXWKRUL]HGꢁDJHQWVꢄꢁꢀDXVHVꢁRWKHUꢁWKDQꢁIURPꢁRUGLQDU\ꢁXVHꢁRUꢁIDLOXUHꢁWRꢁSURSꢇ  
HUO\ꢁXVHꢁWKHꢁ3URGXꢀWꢁLQꢁWKHꢁDSSOLꢀDWLRQꢁIRUꢁZKLꢀKꢁVDLGꢁ3URGXꢀWꢁZDVꢁLQWHQGHGꢆ  
7KLVꢁ:DUUDQW\ꢁH[ꢀOXGHVꢁ3URGXꢀWꢁRUꢁDꢀꢀHVVRU\ꢁꢀOHDQLQJꢄꢁUHSDLUꢄꢁRUꢁUHSODꢀHPHQWꢁRIꢁSODVWLꢀVꢁGXHꢁWRꢁꢀRVPHWLꢀ  
GDPDJHꢁDQGꢁGDPDJHꢁDVꢁDꢁUHVXOWꢁRIꢁQRUPDOꢁZHDUꢆꢁ3URGXꢀWꢁUHSDLUꢁRXWVLGHꢁRIꢁWKHꢁWHUPVꢁRIꢁWKHꢁ/LPLWHGꢁ:DUUDQW\ꢁZLOO  
EHꢁRQꢁDꢁWLPHꢁDQGꢁPDWHULDOVꢁEDVLVꢆꢁ3URORQJHGꢁ3URGXꢀWꢁ´GHPRQVWUDWLRQµꢁꢀDXVHVꢁXQXVXDOꢁ3URGXꢀWꢁZHDUꢁDQGꢁLVꢁQRW  
ꢀRQVLGHUHGꢁQRUPDOꢁXVHꢁXQGHUꢁWKHꢁWHUPVꢁRIꢁWKLVꢁ/LPLWHGꢁ:DUUDQW\ꢆ  
7KHꢁ$ꢀꢀHVVRU\ꢁ:DUUDQW\ꢁꢀRYHUVꢁWKHꢁDꢀꢀHVVRU\ꢁLWHPꢁRQO\ꢁDQGꢁH[ꢀOXGHVꢁQRUPDOꢁZHDUꢆꢁ7KHꢁ/DPSꢁ3URGXꢀW  
:DUUDQW\ꢁH[ꢀOXGHVꢁH[SHꢀWHGꢁODPSꢁGHJUDGDWLRQꢆ  
5HPDQXIDꢀWXUHGꢁ 3URGXꢀWVꢁ DQGꢁ 6RIWZDUHꢁ 3URGXꢀWVꢁ DUHꢁ H[HPSWIURPꢁ WKHꢁ IRUHJRLQJ/LPLWHGꢁ :DUUDQW\ꢆ  
3OHDVHUHIHUWRꢁWKHꢁDSSURSULDWH5HPDQXIDꢀWXUHG3URGXꢀW/LPLWHG:DUUDQW\RU6RIWZDUH3URGXꢀW/LPLWHG:DUꢇ  
UDQW\ꢁIRUꢁDSSOLꢀDEOHꢁ:DUUDQW\ꢁLQIRUPDWLRQꢆ  
DISCLAIMER OF UNSTATED WARRANTIES  
7+(ꢁ:$55$17<ꢁ35,17('ꢁ$%29(ꢁ,6ꢁ7+(ꢁ21/<ꢁ:$55$17<ꢁ$33/,&$%/(ꢁ72ꢁ7+,6ꢁ352'8&7ꢆ  
$//27+(5:$55$17,(6ꢄ(;35(6625,03/,('ꢄ,1&/8',1*ꢄ%87127/,0,7('72ꢄ7+(,03/,('  
:$55$17,(62)ꢁ 0(5&+$17$%,/,7<$1'),71(66)253$57,&8/$5385326($5(',6&/$,0('ꢆ  
7+(5(ꢁ$5(ꢁ12ꢁ:$55$17,(6ꢁ7+$7ꢁ(;7(1'ꢁ%(<21'ꢁ7+(ꢁ'(6&5,37,21ꢁ21ꢁ7+(ꢁ)$&(ꢁ+(5(2)ꢁ$1'  
7+(ꢁ)25(*2,1*ꢁ:$55$17<ꢁ6+$//ꢁ127ꢁ%(ꢁ(;7(1'('ꢄꢁ$/7(5('ꢁ25ꢁ9$5,('ꢁ(;&(37ꢁ%<ꢁ:5,77(1  
,167580(176,*1('%<,1)2&86ꢆ620(-85,6',&7,216'2127$//2:/,0,7$7,21621+2:  
/21*ꢁ$1ꢁ,03/,('ꢁ:$55$17<ꢁ0$<ꢁ/$67ꢄꢁ62ꢁ68&+ꢁ/,0,7$7,216ꢁ0$<ꢁ127ꢁ$33/<ꢁ72ꢁ<28ꢆ  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
Limited Warranty Period  
7KHꢁ/LPLWHGꢁ:DUUDQW\ꢁSHULRGꢁꢀRPPHQꢀHVꢁRQꢁWKHꢁGDWHꢁRIꢁSXUꢀKDVHꢁE\ꢁWKHꢁHQGꢇXVHUꢁꢀXVWRPHUꢁIRUꢁERWK  
WKHꢁꢉꢁ\HDUꢁ3URGXꢀWꢁ:DUUDQW\ꢁDQGꢁWKHꢁꢊꢁ\HDUꢁ$ꢀꢀHVVRU\ꢁ:DUUDQW\ꢆꢁ7KHVHꢁ/LPLWHGꢁ:DUUDQW\ꢁSURYLVLRQVꢁVKDOO  
DSSO\RQO\WRꢁWKHꢁHQGꢇXVHUꢁSXUꢀKDVHUꢁꢂILUVWꢁSHUVRQꢁRUꢁHQWLW\ꢁWKDWꢁSXUꢀKDVHGꢁDꢁQHZꢁ3URGXꢀWꢁIRUꢁSHUVRQDOꢁRU  
EXVLQHVVꢁXVHꢁDQGꢁQRWꢁIRUꢁWKHꢁSXUSRVHꢁRIꢁGLVWULEXWLRQꢁRUꢁUHVDOHꢃꢆꢁ  
To Be Eligible For Limited Warranty Coverage  
$Q\ꢁ SHUVRQꢁ H[HUꢀLVLQJꢁ Dꢁ ꢀODLPXQGHUꢁ WKLVꢁ /LPLWHG:DUUDQW\PXVWHVWDEOLVKWRWKHVDWLVIDꢀWLRQRI  
,Q)RꢀXVERWKWKHGDWHRISXUꢀKDVHDQGWKDWWKH3URGXꢀWZDVSXUꢀKDVHGQHZꢆ7KHVDOHVUHꢀHLSWRULQYRLꢀHꢄ  
VKRZLQJꢁWKHꢁGDWHꢁRIꢁSXUꢀKDVHꢁRIꢁWKHꢁ3URGXꢀWꢁRUꢁ$ꢀꢀHVVRU\ꢁLVꢁWKHꢁSURRIꢁRIꢁWKHꢁGDWHꢁRIꢁSXUꢀKDVHꢆ  
To Obtain Warranty Service  
'XULQJWKH/LPLWHG:DUUDQW\SHULRGꢄWRH[HUꢀLVHWKLV/LPLWHG:DUUDQW\ꢄWKHSXUꢀKDVHUPXVWILUVW  
ꢀRQWDꢀWꢁꢊꢃꢁ,Q)RꢀXVꢄꢁꢉꢃꢁDꢁVHUYLꢀHꢁIDꢀLOLW\ꢁDXWKRUL]HGꢁE\ꢁ,Q)RꢀXVꢁRUꢁꢎꢃꢁWKHꢁSODꢀHꢁRIꢁRULJLQDOꢁSXUꢀKDVHꢆꢁ  
,Q)RꢀXVꢁ&XVWRPHUꢁ6HUYLꢀHꢁꢇꢁꢊꢇꢏꢌꢌꢇꢐꢋꢋꢇꢋꢋꢊꢊꢁRUꢁWHꢀKVXSSRUW#LQIRꢀXVꢆꢀRP  
E
)RUꢁ : DUUDQW\ꢁ VHUYLꢀHꢄꢁ WKHꢁ SXUꢀKDVHUꢁ ZLOOꢁ EHꢁ DGYLVHGꢁ WRꢁ UHWXUQꢁ RUꢁ GHOLYHUꢁ WKHꢁ GHIHꢀWLYHꢁ 3URGXꢀW  
IUHLJKWꢁDQGꢁDOOꢁIHHVꢁSUHSDLGꢄꢁWRꢁDQꢁ,Q)RꢀXVꢁ6HUYLꢀHꢁ&HQWHUꢁRUꢁWRꢁDꢁVHUYLꢀHꢁIDꢀLOLW\ꢁDXWKRUL]HGꢁE\ꢁ,Q)RꢀXVꢆꢁ:KHQ  
UHWXUQLQJ3URGXꢀWꢁWRꢁ,Q)RꢀXVꢄꢁDꢁ5HWXUQꢁ0DWHULDOꢁ$XWKRUL]DWLRQꢁ1XPEHUꢁꢂ50$ꢁHLVUHTXLUHGDQGPXVWEH  
ꢀOHDUO\ꢁGLVSOD\HGꢁRQꢁWKHꢁRXWVLGHꢁRIꢁWKHꢁVKLSSLQJꢁꢀDUWRQꢁRUꢁDꢁVLPLODUꢁSDꢀNDJHꢁDIIRUGLQJꢁDQꢁHTXDOꢁGHJUHHꢁRIꢁSURꢇ  
WHꢀWLRQꢆꢁ ,Q)RꢀXVꢁ RUꢁ WKHꢁ VHUYLꢀHꢁ IDꢀLOLW\ꢁ DXWKRUL]HGꢁ E\ꢁ ,Q)RꢀXVꢁ ZLOOꢁ UHWXUQꢁ WKHꢁ UHSDLUHGꢑUHSODꢀHGꢁ 3URGXꢀW  
IUHLJKWꢁSUHSDLGꢁWRꢁWKHꢁSXUꢀKDVHUꢆꢁ  
3URGXꢀWVꢁUHWXUQHGꢁIRUꢁ:DUUDQW\ꢁVHUYLꢀHꢁPXVWꢁEHꢁDꢀꢀRPSDQLHGꢁE\ꢁDꢁZULWWHQꢁOHWWHUꢁWKDWꢈꢁꢂLꢃꢁH[SODLQV  
WKHꢁSUREOHPꢒꢁꢂLLꢃꢁSURYLGHVꢁSURRIꢁRIꢁGDWHꢁRIꢁSXUꢀKDVHꢒꢁꢂLLLꢃꢁSURYLGHVꢁWKHꢁGHDOHU·VꢁQDPHꢒꢁDQGꢁꢂLYꢃꢁSURYLGHVꢁWKH  
PRGHOꢁDQGꢁVHULDOꢁQXPEHUꢁRIꢁWKHꢁ3URGXꢀWꢆꢁ8SRQꢁUHTXHVWꢁRIꢁ,Q)RꢀXVꢁ&RUSRUDWLRQꢁRUꢁDQꢁDXWKRUL]HGꢁUHSDLUꢁꢀHQWHU  
IRUꢁ,Q)RꢀXVꢄꢁSURRIꢁRIꢁOHJDOꢁLPSRUWDWLRQꢁPXVWꢁDꢀꢀRPSDQ\ꢁWKHꢁZDUUDQW\ꢁUHSDLUꢁ3URGXꢀWꢄꢁRWKHUZLVHꢁWKHꢁ3URGXꢀW  
PXVWꢁEHꢁUHWXUQHGꢁWRꢁWKHꢁSODꢀHꢁRIꢁRULJLQDOꢁSXUꢀKDVHꢄꢁWRꢁWKHꢁPDQXIDꢀWXUHUꢁꢂ3XUꢀKDVHUꢁPXVWꢁEHDUꢁDOOꢁWD[ꢄꢁGXW\ꢁDQG  
IUHLJKWꢃꢄꢁRUꢁWKHꢁ3XUꢀKDVHUꢁPXVWꢁEHDUꢁꢀKDUJHVꢁIRUꢁWKHꢁZDUUDQW\ꢁUHSDLUꢆ  
1RꢁUHSDLUꢁRUꢁUHSODꢀHPHQWꢁRIꢁ3URGXꢀWꢁRUꢁSDUWꢁWKHUHRIꢁVKDOOꢁH[WHQGꢁWKHꢁ/LPLWHGꢁ:DUUDQW\ꢁSHULRGꢁDVꢁWR  
WKHꢁ HQWLUHꢁ 3URGXꢀWꢆꢁ : DUUDQW\ꢁ RQꢁ WKHꢁ UHSDLUꢁ SDUWꢁ DQGꢁ ZRUNPDQVKLSꢁ VKDOOꢁ RQO\ꢁ EHꢁ HIIHꢀWLYHꢁ IRUꢁ Dꢁ SHULRGꢁ RI  
QLQHW\ꢁꢂꢋꢌꢃꢁGD\VꢁIROORZLQJꢁWKHꢁUHSDLUꢁRUꢁUHSODꢀHPHQWꢁRIꢁWKDWꢁSDUWꢁRUꢁWKHꢁUHPDLQLQJꢁSHULRGꢁRIꢁWKHꢁ3URGXꢀWꢁ/LPꢇ  
LWHGꢁ:DUUDQW\ꢁZKLꢀKHYHUꢁLVꢁJUHDWHUꢆꢁ  
LIMITATION OF LIABILITY  
,7ꢁ,6ꢁ81'(56722'ꢁ$1'ꢁ$*5(('ꢁ7+$7ꢁ,1)2&86·ꢁ/,$%,/,7<ꢁ:+(7+(5ꢁ,1ꢁ&2175$&7ꢄꢁ,1  
7257ꢄꢁ 81'(5ꢁ $1<ꢁ :$55$17<ꢄꢁ ,1ꢁ 1(*/,*(1&(ꢁ 25ꢁ 27+(5:,6(ꢁ 6+$//ꢁ 127ꢁ (;&(('ꢁ 7+(  
5(7851ꢁ2)ꢁ7+(ꢁ$02817ꢁ2)ꢁ7+(ꢁ385&+$6(ꢁ35,&(ꢁ3$,'ꢁ%<ꢁ385&+$6(5ꢁ$1'ꢁ81'(5ꢁ12ꢁ&,5ꢇ  
&8067$1&(6ꢁ 6+$//ꢁ ,1)2&86ꢁ %(ꢁ /,$%/(ꢁ )25ꢁ 63(&,$/ꢄꢁ ,1',5(&7ꢄꢁ ,1&,'(17$/ꢁ 25ꢁ &216(ꢇ  
48(17,$/ꢁ'$0$*(6ꢁ25ꢁ/267ꢁ352),76ꢄꢁ/267ꢁ5(9(18(6ꢁ25ꢁ/267ꢁ6$9,1*6ꢆꢁ7+(ꢁ35,&(ꢁ67$7('  
)25ꢁ7+(ꢁ352'8&76ꢁ,6ꢁ$ꢁ&216,'(5$7,21ꢁ,1ꢁ/,0,7,1*ꢁ,1)2&86·ꢁ/,$%,/,7<ꢆꢁ  
Limitation on Bringing Actionꢁꢇꢁ1RꢁDꢀWLRQꢄꢁUHJDUGOHVVꢁRIꢁIRUPꢄꢁDULVLQJꢁRXWꢁRIꢁWKHꢁDJUHHPHQWꢁWRꢁSXUꢀKDVH  
WKHꢁSURGXꢀWꢁPD\ꢁEHꢁEURXJKWꢁE\ꢁSXUꢀKDVHUꢁPRUHꢁWKDQꢁRQHꢁ\HDUꢁDIWHUꢁWKHꢁꢀDXVHꢁRIꢁDꢀWLRQꢁKDVꢁDꢀꢀUXHGꢆꢁ  
Governing Law ꢇꢁ$Q\ꢁDꢀWLRQꢄꢁUHJDUGOHVVꢁRIꢁIRUPꢄꢁDULVLQJꢁRXWꢁRIꢁWKHꢁDJUHHPHQWꢁWRꢁSXUꢀKDVHꢁWKHꢁSURGXꢀWꢁLV  
JRYHUQHGꢁE\ꢁ2UHJRQꢁODZꢆ  
Mandatory Arbitration$Q\DꢀWLRQꢄUHJDUGOHVVRIIRUPꢄDULVLQJRXWRIWKHDJUHHPHQWWRSXUꢀKDVHWKH  
SURGXꢀWꢁLVꢁVXEMHꢀWꢁWRꢁPDQGDWRU\ꢁDUELWUDWLRQꢆ  
620(ꢁ-85,6',&7,216ꢁ'2ꢁ127ꢁ$//2:ꢁ7+(ꢁ(;&/86,21ꢁ25ꢁ/,0,7$7,21ꢁ2)ꢁ,1&,'(17$/  
25ꢁ&216(48(17,$/ꢁ'$0$*(6ꢁ62ꢁ7+(ꢁ$%29(ꢁ/,0,7$7,21ꢁ25ꢁ(;&/86,21ꢁ0$<ꢁ127ꢁ$33/<ꢁ72  
<28ꢆꢁ7+,6ꢁ/,0,7('ꢁ:$55$17<ꢁ*,9(6ꢁ<28ꢁ63(&,),&ꢁ/(*$/ꢁ5,*+76ꢄꢁ$1'ꢁ<28ꢁ0$<ꢁ$/62ꢁ+$9(  
27+(5ꢁ5,*+76ꢄꢁ'(3(1',1*ꢁ21ꢁ-85,6',&7,21ꢆ  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
InFocus Corporation  
In Europe:  
27700B SW Parkway Avenue  
Wilsonville, Oregon 97070-9215  
1-800-294-6400 503-685-8888  
Fax: 503-685-8887  
Olympia 1 NL-1213 NS  
Hilversum, The Netherlands  
Phone: (31) 35-6474000  
Fax: (31) 35-6423999  
In Asia:  
238A Thomson Road  
#18-01/04 Novena Square  
Singapore 307684  
Telephone: (65) 334-9005  
Fax: (65) 333-4525  
Part No. 010-0347-00  
2/2002  
Printed in Japan  
610 299 7033 (1AA6P1P3331-- MV6FA)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Speaker ILS 1294 H User Manual
Pelco TV Converter Box FT8301A User Manual
Philips Clock Radio AJ3011 00 User Manual
Philips Computer Monitor 107P50 User Manual
Philips DVD Player DVD737 User Manual
Philips Stereo System FW338C User Manual
Philips TV Cables SWA2529W 10 User Manual
Philips TV Receiver HDTP 8530 User Manual
Pioneer Home Theater System PDP S62 User Manual
Polaroid Portable DVD Player PDM 0082M User Manual