| 	
		 CZ12 12” Subwoofer   
					Installation Instructions / Owner's Manual   
					By   
					PROFILE CONSUMER ELECTRONICS, INC.   
					15060 SHOEMAKER AVE   
					SANTA FE SPRINGS, CA 90670   
					TEL: (562)404-9393 FAX: (562)404-9433   
					WWW.PROFILEUSA.COM   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				PRODUCT SPECIFICATIONS   
					Free Air Resonance.   
					(FS)   
					33   
					.35   
					Total Q of driver @ FS including all resistance's.   
					Q of driver @ FS including non electrical resistance only.   
					Q of driver @ FS including electrical resistance only.   
					(Qts)   
					(Qms)   
					(Qes)   
					7.01   
					0.37   
					The driver's compliance expressed as an equivalent volume   
					of air (Cubic Ft.).   
					(Vas)   
					(Xmax)   
					(Re)   
					1.10   
					.27   
					3.6   
					175   
					2.5   
					89   
					The driver's linear displacement (inches).   
					The DC resistance of the driver's voice coil (ohms).   
					R.M.S. Power rating of driver (Watts).   
					The driver's voice coil inductance (millihenries).   
					The drivers sensitivity (dB).   
					(W)   
					(Le)   
					(Sens)   
					CALCULATING ENCLOSURES   
					It is difficult to give exact box dimensions that are universal for all cars and trucks.   
					It is for this reason that you must be able to calculate the space in which you have   
					availableinordertoachievetheproperairvolumerequired.   
					It is recommended to build your enclosure from 3/4” thick MDF (medium density   
					fiberboard). Makesuretheenclosureissealedairtight.   
					CalculatingExternalVolume   
					1.) To calculate box volume, measure the outside Width x Height x Depth of the   
					enclosure. Example12”x14”x9”=1512”.   
					2.) Next you must convert cubic inches into cubic feet. To do this, you must divide   
					the cubic inch total by 1728”. Example 1512 1728 = .875 Cubic feet   
					CalculatingInternalVolume   
					1.) To calculate the internal (net) volume of the above box you must first multiply   
					the thickness of the wood you are using by Two (2). Example 3/4” x 2 = 1.5”.   
					2.) Nextsubtract1.5fromeachoftheoutsidemeasurementsofthebox.   
					Width   
					Height   
					Depth   
					12-1.5=10.5   
					14-1.5=12.5   
					9-1.5=7.5   
					3.) Multiplythenewtotals(HxWxD)Example:10.5x12.5x7.5=984.375   
					4.) Next you must convert cubic inches into cubic feet. To do this, you must   
					divide the cubic inch total by 1728” Example 984.375 1728 = .5696 Cubic   
					feet.   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				RECOMMENDED ENCLOSURES   
					Please Note: Our suggested box volumes are given as internal air requirements   
					Sealed Enclosure   
					Box Volume   
					* 1.0 Cu Ft.   
					* Box is given as internal air volume including driver   
					Displacement.   
					CZ12 Ampplitude RResponsee (dB/Hz)   
					Sealed Ennclosure   
					12   
					6 
					F3 = 69   
					0 
					dB   
					-6   
					-12   
					-18   
					-24   
					5 Hz   
					10   
					50   
					100   
					500   
					1000   
					Frequuency   
					Ported Enclosure   
					Box Volume   
					*2.0 Cu Ft.   
					40Hz   
					Port Frequency (Fb)   
					Port Diameter   
					Port Length   
					4 Inches   
					7.7 Inches   
					* Box is given as internal air volume including port and driver displacement.   
					CZ12 Ampplitude RResponsee (dB/Hz)   
					Ported Ennclosure   
					12   
					6 
					F3 = 43   
					0 
					dB   
					-6   
					-12   
					-18   
					-24   
					5 Hz   
					10   
					50   
					100   
					500   
					1000   
					Frequuency   
					
					CZ12 REV 2.06.03   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |