¨
ORDERING REPLACEMENT PARTS
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give
the following information:
¥ The MODEL NUMBER of the product (PFEX97573)
¥ The NAME of the product (PROFORM¨ 975s)
Model No. PFEX97573
Serial No.
¥ The SERIAL NUMBER of the product (see the front cover of this manual)
¥ The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 14 of this manual).
USER'S MANUAL
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satis-
faction through direct assis-
tance from our factory.
PROFORM¨ is a registered trademark of ICON Health & Fitness, Inc.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-
ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.
All repairs for which warranty claims are made must be pre-authorized by ICON. This warranty does not
extend to any product or damage to a product caused by or attributable to freight damage, abuse, mis-
use, improper or abnormal usage or repairs not provided by an ICON authorized service center, products
used for commercial or rental purposes, or products used as store display models. No other warranty
beyond that specifically set forth above is authorized by ICON.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
Patent Pending
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
CAUTION
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
new products, prizes,
fitness tips, and much more!
Part No. 160720 R1099A
Printed in China © 1999 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LISTÑModel No. PFEX97573
R1099A
BEFORE YOU BEGIN
Thank you for selecting the innovative PROFORM¨
975s. The PROFORM 975s offers a unique form of
low-impact exercise that offers greater cardiovascular
benefits and increased muscle toning. The exercise
cycle features adjustable resistance to let you tailor
your exercise to the level thatÕs perfect for you. And
when youÕre not exercising, the exercise cycle can be
folded for compact storage.
Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time
(excluding holidays). To help us assist you, please
mention the product model number and serial number
when calling. The model number is PFEX97573. The
serial number can be found on a decal attached to the
exercise cycle (see the front cover of this manual for
the location of the decal).
Key No. Qty.
Description
Key No. Qty.
Description
1
1
1
1
1
2
1
1
1
1
1
4
4
1
4
1
1
2
4
2
1
6
19
2
8
3
3
1
1
1
1
1
1
2
1
4
2
2
2
4
2
Frame
Upright
Seat Frame
Handlebar
Pulse Grip
Left Side Shield
Right Side Shield
Console
Resistance Knob
Resistance Cable/Control
M5 x 30mm Screw
M5 Nut
Reed Switch/Wire
M6 x 25mm Hex Head Screw
Backrest
Seat
Seat Handle
M6 x 38mm Button Head Bolt
Foam Handle Grip
1Ó x 3Ó Endcap
Tree Fastener
#8 x 5/8Ó Screw
#8 x 3/8Ó Screw
M6 x 16mm Hex Head Screw
M10 x 25mm Button Head Screw
M10 Split Washer
Left Pedal Strap
Right Pedal
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
#
2
1
1
1
1
2
2
5
1
1
1
2
4
1
1
1
1
1
1
1
1
2
1
1
1
4
4
1
1
4
4
10
2
4
1
1
1
1
1
Extension Wire
Flywheel
10mm x 13mm Spacer
Flywheel Axle
Left Pedal
M10 x 52mm Button Head Screw
Wheel
2Ó x 3Ó Endcap
1 1/2Ó x 3Ó Endcap
Cable Clamp
M6 x 56mm Bolt
M8 Split Washer
#8 Flat Washer
Clamp Bolt
Clamp Nut
Resistance Hook
Resistance Spring
Magnet Bracket
M8 x 65mm Hex Head Bolt
M8 Nylon Locknut
Drive Belt
1 1/4Ó Round Endcap
2Ó x 4Ó Endcap
Frame Bushing
2
3
4
5
6
7
8
9
For your benefit, read this manual carefully before
you use the exercise cycle. If you have additional
questions, please call our Customer Service
Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Console
Handlebar with
Pulse Sensor
Backrest
Seat
FRONT
Seat Frame Bushing
M6 Nylon Locknut
M6 Split Washer
Lock Knob
Crank/Pulley
Seat Bracket
Bearing Assembly
Right Pedal Strap
Magnet
M4 x32mm Screw
M4 x 16mm Screw
Rubber Bumper
M8 Flanged Hex Nut
M6 Eyebolt
M10 x 105mm Button Head Bolt
M10 Flat Washer
M10 Nylon Locknut
Adapter
M10 x 58mm Carriage Bolt
Front Stabilizer
Rear Stabilizer
UserÕs Manual
4mm Allen Wrench
5.5mm Allen Wrench
Seat Frame
Pedal
Strap
Seat Handle
BACK
Pedal
Adjustment Bracket
M6 Nut
M10 Washer
#
#
LEFT SIDE
Note: Ò#Ó indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
14
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITIONING GUIDELINES
ASSEMBLY
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition and
adequate rest are essential for successful results.
During the first few months of your exercise program,
keep your heart rate near the low end of your training
zone as you exercise. After a few months of regular
exercise, your heart rate can be increased gradually
until it is near the middle of your training zone as you
exercise.
Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the
packing materials until assembly is completed.
Assembly requires the included tools and your own adjustable wrench
driver
and phillips screw-
.
WARNING: Before beginning this or any
exercise program, consult your physician.
This is especially important for individuals
over the age of 35 or individuals withpre-
existing health problems.
PART CHART
To measure your heart rate, use the pulse sensor in
the handlebar. You can also measure your pulse by
placing two fingers
on your wrist. Stop
exercising and
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part. The second number refers to the quantity used in assembly.
Note: Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check
to see if it has been pre-assembled.
WHY EXERCISE?
take a six-second
heartbeat count.
Exercise has proven essential for good health and
general well-being. Regular participation in a well-
rounded exercise program results in a stronger and
more efficient heart, improved respiratory function,
increased stamina and endurance, better weight man-
agement and body fat control, increased ability to deal
with stress, and greater self-esteem and confidence.
Multiply the result
by ten to find your
heart rate. (A six-
second count is
used because
your heart rate
drops quickly when you stop exercising.) If your heart
rate is too high, decrease the intensity of your exer-
cise. If your heart rate is too low, increase the intensity
of your exercise.
EXERCISE INTENSITY
M6 Split
Washer (67)Ð4
M10 Split
Washer (26)Ð3
M10 Flat
Washer (71)Ð4
M6 Nylon
Locknut (66)Ð4
M10 Nylon
Locknut (72)Ð8
To maximize the benefits of exercising, it is important
to exercise with the proper intensity. The proper inten-
sity level can be found by using your heart rate as a
guide. For effective aerobic exercise, your heart rate
should be maintained at a level between 70% and
85% of your maximum heart rate as you exercise.
This is known as your training zone. You can find
your training zone in the table below. Training zones
are listed according to age and physical condition.
WORKOUT GUIDELINES
A well-rounded workout includes the following three
phases:
A warm-up phase, lasting 5 to 10 minutes. Begin with
slow, controlled stretches, and progress to more rhyth-
mic stretches. This will increase the body temperature,
heart rate, and circulation in preparation for strenuous
exercise.
M4 x 16mm
Screw (34)Ñ1
#8 x 5/8Ó
Screw (22)Ð4
M6 x 16mm Hex
Head Screw (24)Ð8
M6 x 25mm Hex
Head Screw (14)Ð4
TRAINING ZONE (BEATS/MIN.)
AGE UNCONDITIONED CONDITIONED
A cardiovascular phase, including 20 to 30 minutes
of exercising with your heart rate in your training zone.
20
25
30
35
40
45
50
55
60
65
70
75
80
85
138Ð167
136Ð166
135Ð164
134Ð162
132Ð161
131Ð159
129Ð156
127Ð155
126Ð153
125Ð151
123Ð150
122Ð147
120Ð146
118Ð144
133Ð162
132Ð160
130Ð158
129Ð156
127Ð155
125Ð153
124Ð150
122Ð149
121Ð147
119Ð145
118Ð144
117Ð142
115Ð140
114Ð139
M6 x 38mm Button
Head Bolt (18)Ð4
M10 x 25mm Button
Head Screw (25)Ð3
M10 x 58mm Carriage Bolt (74)Ð4
A cool-down phase, consisting of 5 to 10 minutes of
stretching. Thorough stretching offsets muscle con-
tractions and other problems caused when you stop
exercising suddenly. Stretching for increased flexibility
is often most effective during this phase. This phase
should leave you relaxed and comfortably tired.
M10 x 105mm Button Head Bolt (70)Ð4
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exer-
cise, you may complete up to five workouts each
week, if desired. Find the best time of day for your
workouts, and then stick with it.
Remember, the key to success is to make exercise a
regular and enjoyable part of your everyday life.
4
13
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Loosen the Lock Knob (68) on the right side of the
Frame (1). Slide the Seat Frame (3) out until it
stops. Tighten the Lock Knob.
68
1
MAINTENANCE AND STORAGE
3
1
Inspect and tighten all parts of the exercise cycle reg-
ularly. The exercise cycle can be cleaned with a soft,
damp cloth. To prevent damage to the console, keep
liquids away and keep the console out of direct sun-
light.
dard screwdriver in one of the slots in the slotted
Identify the Rear Stabilizer (76), which has no
wheels. Attach the Rear Stabilizer to the Seat Frame
(3) with two M10 x 58mm Carriage Bolts (74) and
two M10 Nylon Locknuts (72).
bearing nut. Lightly tap the screwdriver with a ham-
mer to turn the slotted bearing nut counterclockwise
until the arms are no longer loose. Do not overtight-
en the slotted bearing nut. When the slotted bearing
nut is properly tightened, tighten the crank cut.
72
BATTERY REPLACEMENT
72
76
HOW TO STORE THE EXERCISE CYCLE
If the console does not function properly, the batteries
should be replaced. To replace the batteries, refer to
assembly step 12 on page 7.
When the exer-
cise cycle is not
1
74
in use, it can be
68
CRANK ADJUSTMENT
folded for com-
pact storage.
Refer to the
drawing at the
right. Loosen the
Lock Knob (68)
on the right side
of the Frame (1).
Slide the Seat
Frame (3) as far
into the Frame
2. Identify the Front Stabilizer (75), which has wheels.
Attach the Front Stabilizer (75) to the Frame (1) with
two M10 x 58mm Carriage Bolts (74) and two M10
Nylon Locknuts (72).
2
If the arms of the
Crank (29)
become loose,
they should be
tightened in
72
3
Slotted
Bearing
Nut
order to prevent
excessive wear.
Loosen the
1
Crank
Nut
Wheels
crank nut on the
left arm of the
Crank. Place the
end of a stan-
as it will go. Tighten the Lock Knob. Store the exer-
cise cycle indoors, away from moisture and dust.
75
29
74
3. Attach the Upright (2) to the Frame (1) with three
M10 x 25mm Button Head Screws (25) and three
M10 Split Washers (26). Be careful not to pinch
the Reed Switch Wire (13) or the Resistance
Cable (10).
3
2
25
26
26
25
13
25
10
1
4. Route both Adapters (73) up through the Upright (2)
as shown.
4
14
67
73
Attach the Handlebar (4) to the Upright (2) with two
M6 x 25mm Hex Head Screws (14) and two M6 Split
Washers (67), but do not tighten the Screws yet.
Make sure that the Screws are threaded into the
indicated holes. Note: Two additional Screws will
be attached in step 6.
67
4
14
2
12
5
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Connect the Reed Switch Wire (13) and the two
Adapters (73) to the corresponding wires on the
Console (8).
5
HOW TO USE THE PULSE SENSOR
8
9
Console
Wires
The convenient pulse sensor allows you to measure
your heart rate periodically. You can measure your
heart rate before you begin exercising, during your
workout, and again when you finish.
HAND PULSE SENSOR TROUBLE-SHOOTING
If your Console (8) has a ground wire, attach it to
the Upright (2) with an M4 x 16mm Screw (34).
¥ Avoid moving your hands while using the pulse sen-
sor. Excessive movement may interfere with heart
rate readings. If the pulse sensor is not used correct-
ly, the heart indicator will flash repeatedly in the
PULSE display but your heart rate will not be shown.
Ground
Wire
34
73
13
Next, attach the Console (8) to the Upright (2) with
four #8 x 5/8Ó Screws (22).
Note: Before
you can use
10
22
Press the Resistance Knob (9) onto the Resistance
Control (10). Be sure that the mark on the Knob is
correctly aligned.
the pulse sen-
sor, you must
peel the protec-
tive vinyl cov-
ering off the
metal contacts
on the front
and rear of
each pulse
grip.
2
¥ If an ÒLÓ appears in the PULSE display, then the
pulse sensor received too little pulse information to
accurately calculate your pulse. Let go of the metal
contacts; then place your hands on the contacts
again. Your palms must be resting on the inner con-
tacts and your fingers must be touching the outer
contacts.
22
6. Finish attaching the Handlebar (4) to the Upright (2)
with two more M6 x 25mm Hex Head Screws (14)
and two more M6 Split Washers (67). Tighten all
four Hex Head Screws.
6
Metal
Contacts
14
67
¥ If an ÒHÓ appears in the PULSE display, then the
pulse sensor received too much pulse information to
accurately calculate your pulse. Let go of the metal
contacts; then place your hands on the contacts
again. Your palms must be resting on the inner con-
tacts and your fingers must be touching the outer
contacts.
To use the pulse sensor, first make sure that the power
is turned on. Stop exercising, rest both feet on the
floor, and place your hands on the metal contacts. Your
palms must be resting on the inner contacts and your
fingers must be touching the outer contacts. Avoid
moving your hands. After a moment, the heart indicator
in the PULSE display will flash and your heart rate will
be shown. For the most accurate heart rate reading,
continue to hold the contacts for about 15 seconds.
67
4
14
2
¥ Do not hold the metal contacts too tightly; doing so
may interfere with heart rate readings.
7. Attach the Seat Bracket (69) to the Seat Frame (3)
with four M10 x 105mm Button Head Bolts (70), four
M10 Flat Washers (71), and four M10 Nylon
Locknuts (72).
70
7
¥ Do not move your hands while you hold the metal
contacts; your muscle movement may interfere with
heart rate readings.
WARNING:The pulse sensor is not a med-
ical device. Various factors, including the
userÕs movement, may affect the accuracy
of heart rate readings. The pulse sensor is
intended only as an exercise aid in deter-
mining heart rate trends in general.
¥ For the most accurate heart rate reading, wait for
about 15 seconds.
69
¥ For optimal performance of the pulse sensor, keep
the metal contacts clean. The contacts can be
cleaned with a soft clothÑnever use alcohol,
abrasives, or chemicals.
3
71
71
72
8. Attach the Seat (16) to the Seat Bracket (69) with
four M6 x 16mm Hex Head Screws (24).
8
16
69
24
6
11
Download from Www.Somanuals.com. All Manuals Search And Download.
¥ Distance (DIST)ÑThis mode shows the total num-
ber of miles you have cycled, up to 999. The display
will then reset to zero and continue counting.
If you selected a
pacer program, two
indicators on the
9. Attach a Seat Handle (17) to the Seat Bracket (69)
with two M6 x 38mm Button Head Bolts (18) and
two M6 Nylon Locknuts (66).
9
Target
Pace
P.A.C.E.R. track will
light. The indicator
on the inner track
will show your actual
pace. The indicator
on the outer track
17
¥ LapsÑThis mode shows the number of quarter-mile
laps you have completed.
Actual
Pace
Attach the other Seat Handle (17) to the Seat
Bracket (69) in the same manner.
¥ Calories (CAL)ÑThis mode shows the approximate
number of calories you have burned.
69
66
will move around the track at the programmed
pace. As you exercise, adjust your pace so that
the indicators on the inner and outer tracks
remain even. As the program progresses, the tar-
get pace will change periodically; as the target
pace changes, you should also adjust your pace.
Important: The target pace is a goal pace. Your
actual pace may be slower than the target
pace, especially during the first few months of
your exercise program. Be sure to exercise at
a pace that is comfortable for you.
18
17
10
STEP-BY-STEP CONSOLE OPERATION
10. Attach the Backrest (15) to the Seat Bracket (69)
with four M6 x 16mm Hex Head Screws (24).
Before the console can be operated, the batteries
must be installed. (See assembly step 12 on page 7
for installation instructions.) Follow the steps below to
operate the console.
15
Turn on the power
1
69
To turn on the
power, press the
on/reset button or
simply begin exer-
cising. When the
power is turned on,
the entire display
Follow your progress with the monitor modes
4
When the power is
turned on, the con-
sole will scan
will appear for two seconds. The console will then
be ready for use. Note: If batteries were just
installed, the power will already be on.
through the five
modes automatically.
A flashing mode indi-
cator will show which
mode is currently dis-
played. When the Laps mode is displayed, an ÒLÓ
will also appear. If desired, the display can be
reset by pressing the on/reset button.
24
Mode Indicator
11. Identify the Left Pedal (45) (there is an ÒLÓ on the
Left Pedal for identification). Using an adjustable
wrench, tighten the Left Pedal counterclockwise into
the left arm of the Crank (29).
11
Select one of the three pacer programs or the
manual mode
2
27
When the power is
first turned on, the
console will be in
the manual mode.
Tighten the Right Pedal (not shown) clockwise into
the right arm of the Crank (29).
29
45
The exercise cycle
also features an
Adjust the Pedal Strap (27) on the Left Pedal (45) to
the desired position. Press the Pedal Strap onto the
adjustment tab on the Left Pedal.
innovative handgrip
pulse sensor. The
pulse display allows
you to monitor your
To select one of the
pacer programs,
repeatedly press
the program button.
Tab
Adjust the Pedal Strap on the Right Pedal (not
shown) in the same manner.
heart rate during your workout. To use the pulse
sensor, see page 11.
The program indi-
cator will show
which program you
have selected. The
12
12. The Console (8) requires either two or three ÒAAÓ
batteries (not included); alkaline batteries are
Turn off the power
8
5
programs will be selected in the following order:
the manual mode, the 6 MPH/30 RPM program,
the 12 MPH/60 RPM program, and the 18 MPH/
90 RPM program. Note: Once you select a pacer
program, you can reselect the manual mode by
repeatedly pressing the program button.
recommended. Open the battery cover (not shown)
on the back of the Console. Press the batteries into
the battery clip. Make sure that the negative (Ð)
ends of the batteries are touching the springs.
Close the battery cover. Note: If the battery clip
holds three batteries, you must insert three batteries.
To turn off the power, simply wait for about six
minutes. If the pedals are not moved and the
console buttons are not pressed for six minutes,
the power will turn off automatically.
Batteries
Battery
Clip
Begin your workout
3
If you selected the manual mode, one indicator on
the inner P.A.C.E.R. track will light. As you exer-
cise, this indicator will move around the quarter-
mile track.
13. Make sure that all parts are properly tightened before you use the exercise cycle. Note: Some hard-
ware may be left over after assembly is completed.
10
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE EXERCISE CYCLE
DIAGRAM OF THE CONSOLE
HOW TO ADJUST THE POSITION OF THE SEAT
FRAME
HOW TO ADJUST THE PEDAL STRAPS
To adjust the Left Pedal Strap (27), first pull the end
of the Pedal Strap off the adjustment tab on the Left
Pedal (45). Align a different hole in the Pedal Strap
with the adjustment tab. Press the Pedal Strap onto
the adjustment tab. Adjust the Right Pedal Strap in
the same manner.
The Seat Frame (3) can be adjusted to the position
that is the most comfortable for you. To adjust the
Seat Frame, first loosen the Lock Knob (68) on the
right side of the Frame (1). Slide the Seat Frame for-
ward or backward to the desired position. Tighten the
Lock Knob.
27
Note: If there is a thin
sheet of clear plastic on
the face of the console,
remove it.
1
68
Adjustment Tab
45
HOW TO ADJUST THE PEDALING RESISTANCE
3
The pedaling
8
resistance can
be adjusted
with the
Resistance
Knob (9) locat-
ed on the
Console (8). To
increase the
resistance, turn
DESCRIPTION OF THE CONSOLE
tors even. Important: The target pace is a goal
pace. Your actual pace may be slower than the tar-
get pace, especially during the first few months of
your exercise program. Be sure to exercise at a
pace that is comfortable for you.
9
The innovative console offers a manual mode and
three pacer programs. The pacer programs are
designed to help you achieve your exercise goals by
pacing your exercise. The programs include an 18
MPH/90 RPM program, a 12 MPH/60 RPM program,
and a 6 MPH/30 RPM program. The console also fea-
tures five monitor modes that provide continuous exer-
cise feedback. Note: On some consoles the pro-
grams are listed in MPH and on others in RPM.
Both sets of programs are identical.
The graphs on the left side of the console show how
the target pace will change during each program (see
the drawing above). Each graph is divided into ten
columns, and each column represents 1/10 of a mile.
The bars in each column show what the target pace
will be during that 1/10 of a mile. For example, in the
first column of the 12 MPH/60 RPM graph, there is
one bar. This shows that during the first 1/10 of a mile
in this program, the target pace will be 6 MPH (30
RPM). In the second column, there are two bars, indi-
cating that the pace is now 12 MPH (60 RPM).
the Resistance Knob clockwise; to decrease the resis-
tance, turn the Resistance Knob counterclockwise.
HOW THE PACER PROGRAMS OPERATE
When you use a
pacer program, an
indicator will light
on each track of
the P.A.C.E.R.
Actual
Pace
Target
Pace
DESCRIPTION OF THE MONITOR MODES
display. The outer
track shows a tar-
get pace; the inner
track will show
your actual pace.
The target pace
The five monitor modes provide continuous exercise
feedback. The modes are described below.
¥ SpeedÑThis mode shows your pace, in miles per
hour.
will change periodically during the 18 MPH/90 RPM
and 12 MPH/60 RPM programs; as the target pace
changes, simply adjust your pace to keep both indica-
¥ TimeÑThis mode counts the length of time you
have exercised. Note: If you stop exercising for ten
seconds or longer, the time mode will pause.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|