TABLE OF CONTENTS
1.
2.
3.
4.
Readme First.................................................................................................................... 2
FCC Statement ................................................................................................................3
Safety Instructions ....................................................................................................4 - 5
Installation (Refer to REARconnectors on page 13) ................................................6
Television .......................................................................................................................6
Video Recorder ..............................................................................................................6
DVD Player ...................................................................................................................7
Computer .......................................................................................................................7
High Definition Receiver .........................................................................................7
Remote Control Operation .......................................................................................... 8
Functions ................................................................................................................9 – 10
Parental Controls ..................................................................................................11 – 12
Rear Connectors .......................................................................................................... 13
Energy Saving .............................................................................................................14
Simple Troubleshooting..............................................................................................14
OWNER’S MANUAL
Multimedia/HDTV/XGA Monitor/Receiver
DM-5948S(T)(C)
DM-6952S(T)(C)
DM-7752S(T)(C)
5.
6.
7.
8.
9.
10. Specifications ................................................................................................................15
DM -5948S Specifications ...........................................................................................15
DM-6952S Specifications .......................................................................................... 16
DM -7752S Specifications ...........................................................................................17
11. VGA Connector Assignment .................................................................................... 18
12. Appendix A : OSD Function......................................................................................19
13. Appendix B : Factory Preset Mode .......................................................................... 20
14. Appendix C : Remote Controller .............................................................................21
15. Appendix C (Cont’d) : Remote Controller Functional Matrix.............................22
16. Appendix D : VGA2 In & Panel Keys .................................................................... 23
17. T-Series Warranty........................................................................................................24
Monivision Graphic Systems
11100 DANA CIRCLE .
CYPRESS,CA90630
All registered trademarks are the property of their respective owners
1
Download from Www.Somanuals.com. All Manuals Search And Download.
14. Unplug this product from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
Safety Instructions
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
1. Read all of these instructions.
c.
If the product has been exposed to rain or water.
2. Save these instructions for later use.
d. If the product does not operate normally when the operating instructions are
followed. Adjust only those controls that are covered by the operating
instructions since improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to normal operation.
3. Follow all warnings and instructions marked on the product.
4. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
e. If the product has been dropped or the cabinet has been damaged.
f. If the product exhibits a distinct change in performance, indicating a need for
service.
5. Do not use this product near water.
6. Do not place this product on an unsuitable cart, stand or table; the product may fall causing
damage or injury.
7. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To
ensure reliable operation of the product and to protect it from overheating, these openings
must not be blocked or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product should never be placed
near or over a radiator or heat register. This product should not be placed in a built-in
installation unless proper ventilation is provided.
8. This product should be operated from the type of power source indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or local Power
Company.
9. This equipment is to be electrically grounded. This product is equipped with a three-wire
plug with a third (grounding) pin. This plug will only fit into a grounded AC outlet. This
is a safety feature. If you are unable to insert the plug into the outlet, contact a licensed
electrician to replace the outlet with a properly grounded outlet. Do not defeat the purpose
of the grounding plug!
10. Do not allow anything to rest on the power cord. Do not locate this productwhere persons
will walk on the cord.
11. If an extension cord is used with this product, make sure that the total of the ampere ratings
on the products plugged into the extension cord does not exceed the extension cord ampere
rating. Make sure that the total of all products plugged into the wall outlet does not exceed
15 amperes.
12. Never push objects of any kind into this product through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the product.
13. Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage points or other risks. Refer all servicing to qualified
service personnel.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD player:
If using the Video (Composite) output from the DVD, connect the Video output, Left
INSTALLATION (Refer to REAR CONNECTORS on page 13)
1
and Right Audio outputs of the DVD to the Video Composite, Audio Left and Audio
Precautions:
Right inputs on the T.
The Princeton Graphics T-Series should be placed at least six (6) inches from the wall.
2. UsingtheRemotecontrolpresstheVIDEOinputkeyor“TV/PC/AV”keyuntilNTSC
VIDEO appears on the screen.
3. Start the DVD player.
Television:
4. If using the S-Video output of the DVD, connect the S-Video output, Left and Right
Audio output of the DVD to the S-VideoAudioLeftandAudioRightinputsforS-
VideosignalontheT..
5. UsingtheRemotecontrolpresstheS-VIDEO input key or “TV/PC/AV” key until
NTSCS-VHS appears on the screen.
6. Start the DVD player.
1.
Install cable from antenna or cable TV to the “F” connector labeled “ANT IN”.
2. Push the monitor main power switch on, the Red LED Indicator should be on.
This indicates that the T is in STAND BY mode.
3. Press the Power button on the Remote control, the Red indicator should turn
green.
4. Using the Remote control press the TV/PC/AV button until the T displays
TV-MAIN NTSC.
5. Using the Remote control press the TV/CATV. Select TV if you are using an
antenna. Select CATV if you are using a cable service.
6. Using the Remote control press the AUTO button, the T will now preset all
active channels into memory.
7. There are two methods of selecting a channel:
a. Press CH D/Ñ on the Remote control or the front panel to step through
the channels.
b. Press the numeric keys of the channel desired.
8. Press the Vol up/down on the Remote control or the front panel to adjust the
volume.
Computer:
1. Connect the computer to the monitor using VGA1 located on the rear panelorVGA2
locatedonthefrontpanel.
2. Connect the Audio to the appropriate audio connectors next to the VGA connector
being used. Boot the computer so that video will be present. Without video present,
the T will enter the DPMS (power management “sleep”modewithinthreeseconds. If
this occurs, press the power button on the remote or the front panel. Make certain a
signalisbeingoutputfromthecomputerdevice. (refertoPage2)
3. Using the Remote control press the VGA1 or VGA2 key or “TV/PC/AV” key until
VGA1 or VGA2 appears on the screen. If an image does not appear, press the
VGA1/VGA2 button on the remote or the front panel.
4. If the T still has no display check your video card resolution and refresh settings with
Appendix B.
Because standard desktopcomputerdisplaysoperateathigherfrequencies, itis
possible to overdrive the T. You may need to connect the computer back to a desktop
monitor and reset the resolution and refresh rate according to the parameters in
Appendix B.
Video Recorder: (VCR)
1. If you are using the F Connector to connect the signal, follow the instructions
for television setup, connecting the antenna or cable to the ANT IN on the
VCR, and connect a coax patch cable from the ANT OUT of the VCR to the
F connector on the T. Select channel 3 on the T per step 7 above, and set the
VCR/TV selector on the VCR to “VCR”. Press PLAY on the VCR.
2. If using the Video (Composite) output from the VCR, connect the Video
output,Left and Right Audio outputs of the VCR to the Video Composite,
Audio Left and Audio Right inputs on the T.
3. Using the Remote control press the “TV/PC/AV” key until NTSC VIDEO
appears on the screen.
4. Press PLAY on the VCR.
5. If using the S-Video output of the VCR, connect the S-Video output, Left and
Right Audio output of the VCR to the S-Video Audio Left and Audio Right
inputs for S-Video signal on the T.
6. Using the Remote control press the “TV/PC/AV” key until NTSC S-VHS
appears on the screen.
High Definition Receiver:
1. Connect a Receiver to the monitor using the VGA1 located on the rear panel or VGA2
locatedonthefrontpanel.
2. Connect the Audio to the appropriate audio connectors next to the VGA connector in
use.
3. Usingthe Remotecontrolpress the VGA1orVGA2 keyor “TV/PC/AV” key until
VGA1orVGA2appearsonthescreen, ifusingVGAtoinputtheHDTVsignal.
4. Press MENU, then VOL+ while the PICTURE function is highlighted on the On
Screen Menu.
5.
Press SEL-to highlight V-SIZE, thenpressVOL+toselectthatfunction.
6. Press VOL-to reduce the height of the display to 12”(307mm) for DM-5948S; 14.3”
(364mm) for DM-6952Sor16.3”(414mm)forDM-7752S.
Setting the Aspect Ratio:
Some HD receivers (RCA DTC-100 for example) feature a user-defined full-screen or
letterbox output mode for 4:3 aspect ratio monitors. Please refer to your HD receiver
manual for details. If your receiver does not have this function, follow the instructions in
steps 4-6 above to adjust the image for a 16:9 aspect ratio within the 4:3 aspect ratioT
display area.
7. Press PLAY on the VCR.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL OPERATION (Refer to Appendix C, pages 19-20)
1. POWER - puts T into standby or power on mode.
FUNCTIONS
2. MUTE button - Turns audio off or on. The mute function will automatically
unlock if any adjusts are made related to audio(i.e., volume, bass, etc.)
3. PIC/PAGE DÑ– Increase or decrease Color or Contrast, Change Hue (Tint), or
shift horizontal position of the picture in the TV mode.
1.Indicators:
a. Power LED shows power on/off and power saving status.
b. Stereo LED is lit when the TV program being received is in stereo.
c. SAP LED is lit when the program is broadcast in Sub-audio.(2nd language)
Power LED
Green
Stereo LED
Stereo On (Red)
Mono Off
SAP LED
Main Audio Off
Sub Audio On
(Yellow)
PIC/PAGE DÑ– Increase or decrease Color or Contrast, Change Hue (Tint) of the
picture in the Video (Composite) and S-Video modes
4. PIC-STD button – Recall Factory preset values for Color, Contrast and Hue,
Horizontal Position (simultaneously).
5. TV/CATV button – selects the mode. TV, CATV, VGA1, VGA2.
6. SLEEP – to set sleep timer. Each press will increase the sleep timer in 10-minute
intervals up to 120 minutes (then back to 00). When the sleep count reaches the
last 5 minutes the timer display will show up every minute for 3 seconds. During
the la st minute it will display every 10 seconds.
Normal on
Stand by
Amber
Suspend/Active off
Main power off
Red
Off
2.Power Switch:
Controls the power of the monitor. The monitor may power-on directly or
may go to powersavingmode aft er AC power switch is pressed. (See 4c Options)
.
3.Panel Keys: There are 8 panel keys (See Appendix D)
Power key:
a.
Serves a similar function as the power switch. When you switch off the
power through this key, the monitor goes into an “active off state”. Th e monitor can be
returned to an active on state by pressing the power key on the front control panel or
throughthepowerkeylocatedontheremote.
7. PC/TV/AV-Steps through the video input modes.
8. MENU – brings up adjustments depending on the mode The T is in. (Refer to
appendix A).
b. TV/PC/AV select:
c. Menu key:
The order being: TV / PC / VIDEO (Composite) / S-video/.
This key invokes the On-Screen Display (OSD) menus (See Appendix A ).
9. SEL+/SEL- highlights the menu item to be adjusted.
10. VOL-/VOL+ decrease or increase the selected menu item. If the OSD is not
invoked, VOL-/VOL+ control the audio level directly.
11. AUTO button – Automatically scans all channels for a signal, then sets them into
preset memory.
12. ADD/ERASE button – allows the user manual addition of a channel or erasing a
channel from preset memory.
13. DISP Button – Display the current input mode of the T.
14. MTS button – Switches to bilingual audio.
15. SYSTEM button – Changes the video system in TV, Video, and SVHS. System
types are NTSC, PAL, PAL-M, PAN-N, and SECAM.
16. FINE TUNING – Allows for fine-tuning of channels.
17. JUMP (CR-440) or LAST(PGS-T)– Returns to the previous channel.
18. CH D/ CHÑ –Steps through the channels.
19. Numeric keys 0 to 9 –allows direct channel selection.
20. FIELD button – (useable only when CCD is on)
These menus and sub-menusmaybeenteredorexitedbyusingthesamekey. TheOSD
willdisappearifleftidlefor12seconds. TheOSDmenucanbecontrolledfromthefront
panel or by the remote control.
d. VOL+/-:
Serves dual functions as described below:
l
WhentheOSDmenu/sub-menu is not invoked, VOL+/ -controls audio level.
Enter key:
l
In menu/sub-menu, the VOL+/VOL- keys become the select, or execute keys.
These controls include entering sub-menus, executing of a function and enable/disable a
function.
l
+/- key: When the magnitude bar appears for functional adjustment,VOL+/VOL-keys
are now +/-keys. They are used to change the magnitude of a certain functions.
e. SEL+/SEL-:
To select an item in the main menu or sub-menu. Note: when you are
adjusting a function under the magnitude bar, you may also adjust other items in the same
group to by pressing the up/down keys. Press MENU to return to the previous menu level
orexitifatthetopmenulevel.
f. CH+/CH-:
g. TV/CATV:
Steps tuner channelsforwardor backward.
Select TV or CATV pair as inputs. This is because in the TV/AV mode, the
VGA 1/ VGA 2keyservesasTV/CATVkey.
VGA 2 (front) connector is designed for 2 nd computer use.
*NOTE - If VGA 2 or VGA 1 connector does not have input signal for several seconds, the
monitor LED will turn from green to yellow. The monitor is then in the “standby” mode
21. LANG button – Language Selection (1 or 2).
22. CAP/TXT button –Closed-Caption foreground/background display style
until a signal is received. This function only applies at POWER-ON
.
(Accessible only when CCD is on)
*
It is normal to observe a delay in the image appearing after changing the input mode on the
23. CCD button – Closed Caption, yellow means OFF, Green is ON
24. VIDEO - Direct selection of Composite video input (CR-440)
25. S-VHS- Direct selection of S-Video input (CR-440)
26. VGA-1- Direct selection of VGA1 (rear) PC or HDTV input (CR-440)
27. VGA-2- Direct selection of VGA2 (front) PC or HDTV input (CR-440)
28. TV- Direct selection of TV (internal tuner) (CR-440)
monitor. Unlike a common Television set, which displays a picture immediately upon changing
the channel, the T is a multifrequency Receiver/Monitor which utilizes input detection and
selection circuitry. It is also normal to hear the clicking of a relay, especially when selecting or
leaving the VGA (PC) mode.
9
8
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Function Controls: This adjusts the picture and audio parameters. Press MENU to
invoke the OSD menu, then press SEL + or SEL - to choose the item you want to
adjust. Press + or – (VOL+ / VOL- ) to take action, enter a sub-menu, or to adjust
the magnitude bar. Use SEL + or SEL – to select a new item, and + or - to adjust
the function selected.
PARENTAL CONTOLS
Enter your personal PIN number:
a. Press CH-LOCK. The Parental Control Menu will be displayed.
b. Enter 4 digits of your own choosing by pressing the numeral keys. Upon
pressing the fourth number,
To leave the menu, press the MENU key until you reach the OSD menu.
a. Picture:
the Setup Sub-Menu will be displayed. Write down the number and
put it away for safe-keeping.
If you forget your PIN number, there is no way for the user to access the parental
controls.
The adjustable functions are: Contrast, Brightness, Horizontal Size, Horizontal
Position (Phase), Vertical Size, Vertical Position (Center), PinCushion (EW),
Trapezoid (Keystone), Bow (Pin-Balance), Rotation (tilt), Parallelogram,
Red/Green/Blue Colors and Degauss.
l
Press CH-LOCK to exit a menu, sub-menu or Parental Control function.
Recall will replace current settings with factory preset values. You can only
l
recall factory settings when the PC mode is in one of the 9 predefined modes.
See appendix B for preset modes. Color recall is used to recall the factory setting
of Red.Green.and Blue Video Gain values. This is only used to set the color
temperature or white point of the display. It must not be construed as an
adjustment for primary colors.
These parameters are for PC mode only, and cannot be accessed in TV/AV
mode. In TV/AV mode, you can adjust the TV parameters via the remote using
PIC-SEL, PIC-PAGE, and PIC-STD.
Parental control setup for television programs this applies to ratings for program
content of broadcast material.
Enter the Setup Menu by entering your PIN number as described above.
a. Press PIC/PAGE Ñ or D to scroll in the Setup Sub-Menu to highlight
Television Guidelines.
l
l
b. Press PIC-SEL to enter the Setup Sub-Menu for Television Guidelines.
c. Press PIC/PAGE Ñ or D to scroll in the ratings and their categories.
d. Press PIC-SEL to block (B) or unblock (U) material in the selected rating
category
Audio: The following parameters can be adjusted: Bass, Treble, Sub-woofer,
Balance, ON/OFF, and Volume. The mute function will automatically unlock if
any adjusts are made related to audio (i.e., volume, bass, etc.)
The ratings are:
TV-MA: Mature Audiences Only
The categories are:
V-Graphic violence
Options:
S- Explicit sexual activity
L-Crude indecent language
V- Intense violence
Moiré ON/OFF: For some modes, it is better to switch the moiré off to get better
video performance. When Moiré is ON, ADJUST MOIRE is displayed. You can
now adjust moiré by using +/- key. In TV/AV mode, moiré cannot be adjusted.
Background ON/OFF: Switch the OSD background ON or OFF to adapt to a
different display background of the PC.
INSTANT-ON: By selecting YES for INSTANT-ON, the monitor will be ON
directly, which is also the default option. By selecting NO for INSTANT-ON, you
must press the power key (inside the front access door) once more to switch on the
monitor after AC is applied .
TV-14: Parents Strongly Cautioned
TV-PG: Parental Guidence Suggested
S- Intense sexual situation
L- Strong coarse language
D- Intensely suggestive dialogue
V- Moderate violence
S- Sexual situations
l
l
L- Infrequent coarse language
D- Suggestive dialogue
TV-G: General Audience
TV-Y7: Directed to Older Children
TV-Y All Children
FV- Fantasy violence
6. Remote: (See Appendix C)
The CR-440 remote has 43 keys. Only 8 keys are used for monitor control. The
other 31 keys are for video converter control. The 8 keys are POWER, MUTE,
VOL+, VOL-, SEL+, SEL-, MENU, and VGA1/VGA2.These keys are specifically
marked (Refer to Appendix C for the remote layout and key designations,
andAppendix D (Panel keys).
Selecting block (B) under ALL in the Guideline column will block all ratings and
categories at once.
Press CH-LOCK to exit a menu, sub-menu or Parental Control function.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental control setup for Motion Picture Guidelines: this applies to ratings for
program content of media sources, such as DVD’s.
REAR CONNECTORS
Enter the Setup Menu by entering your PIN number as described above. If already in
the setup menu, proceed to step a. below.
1. Power input socket: Connect the power source to the monitor.
2. VGA signal out connector: Video signal connector, Output the signal to another
monitor.
a. Press PIC/PAGE Ñ or D to scroll in the Setup Sub-Menu to highlight
Motion Picture Guidelines.
b. Press PIC-SEL to enter the Setup Sub-Menu for Motion Picture Guidelines.
3. Video composite out to another device.
4. Audio out Left – Left speaker signal to another device.
5. Audio out Right – Right speaker signal to another device.
6. Video composite in – from a VCR or DVD player
7. Audio Left in – composite, from a VCR or DVD player.
8. Audio Right in – composite, from a VCR or DVD player.
9. Audio Left in – for S-Video signal.
c. Press PIC/PAGE Ñ or D to scroll in the ratings.
d. Press PIC-SEL to block (B) or unblock (U) material in the selected rating.
The ratings are:
X
Adults only
NC-17
R
PG-13
No one 17 and under
Restricted – Under 17 requires parental or adult guardian
Parents stongly cautioned – Some material may be inappropriate for
children under 13
10. Audio Right in – for S-Video signal.
11. S-Video in – from a VCR or DVD player.
12. VGA1 in – from Computer or HDTV receiver.
13. Audio in – from Computer.
PG
Parental Guidence suggested – Some material may not be suitable
for children
14. Antenna in – from antenna or cable TV.
Parental Control On/Off:
Enter the Setup Menu by entering your PIN number as described above. If already in
the setup menu, proceed to step a. below.
a. Press PIC/PAGE Ñ or D to scroll in the Setup Sub-Menu to highlight Parental
Control.
b. Press PIC-SEL to toggle Parental control ON or OFF.
Press CH-LOCK to exit Parental Control function.
Change PIN Code:
Enter the Setup Menu by entering your PIN number as described above. If already in
the setup menu, proceed to step a. below.
a. Press PIC/PAGE Ñ or D to scroll in the Setup Sub-Menu to highlight Change
PIN Code.
b. Press PIC-SEL to go to the Code Entry Menu
c. Enter a new 4 digit code of your own choosing by pressing the numeral keys.
You will be prompted to enter the new PIN code again for confirmation. If you
decide you do not want to change your PIN Code, press CH-LOCK to exit this
function. Write down the number and put it away for safe-keeping.
If you forget your PIN number, there is no way for the user to access the parental
controls.
13
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
ENERGY SAVING
14
Model:DM-5948S Specifications
The T-Series is Energy Star compliant. It contains special hardware that provides energy-
saving, automaticStandByandShutOFFfeatures. After a period of time,as little as three
seconds, the monitor will automatically power down untilthe mouse or keyboard are in use.
Automatic Stand By and Shut OFF are set through a software progr amon your
computer.
CRT Size/Type
29” Super flat square screen with 108 degree magnetic deflection, dynamic
focus forming,49% transmission.
Dot Pitch
0.74
Maximum Resolution
Maximum TV Resolution
Recommended Resolution
Display Colors
XGA;1024 768@60Hz
525 lines (NTSC) ot 625 lines (PAL)
800 600@75Hz
DM -5948S Power consumption:
Unlimited
Power on
220 W Max
Stand by
35 W
Suspend
8 W
Off
8 W
Active Display Area
H-Frequency
Default : 20.50in 15.35in; 520mm 390mm
30KHz to 52KHz auto sync
V-Frequency
50Hz to 120Hz
DM -6952S Power consumption:
Compatibility
VESAâ 640 480 @ 60Hz, 800 600 @ 60Hz, 1024 768 @ 60Hz
VESAâ 640 480 @ 72Hz, 800 600 @ 72Hz
Power on
230 W Max
Stand by
35 W
Suspend
8 W
Off
8 W
VESAâ 640 480 @ 75Hz, 800 600 @ 75Hz
â
VESA 640 480 @ 85Hz
NTSC 3.58MHz or PAL 4.43MHz
HDTV READY 480P, 720P, 1080i
DM -7752S Power consumption:
NTSC(68CH CATV125CH)
Tuner
Power on
250 W Max
Stand by
35 W
Suspend
8 W
Off
8 W
Input Signal
Video :Analog (0.7Vp-p)
Sync. :Separate Sync. TTL Level Positive/Negative
Composite Sync. TTL Level Positive/Negative
RGBHV in #1- 15 pin D (VGA), Mini-jack audio, on back panel
RGBHV in #2- 15 pin D (VGA), RCA jack Left, Right, on front panel
Input Connector/Cable
RGBHV out - 15 pin D (VGA), RCA jack Left, Right, on back panel.
Switched depending on
SIMPLE TROUBLESHOOTING
RGBHV#1 or RGBVH#2.
Antenna / CATV in - F connector on back panel
Composite Video in - RCA jacks, Composite Video, Audio Left and Right o n
back panel
1.
2.
3.
LED not lit: check the connection of power cord press the main power button.
No input signal: check the connection of signal cable.
Composite Video out-RCA jacks, Composite Video, Audio Left and Right
on back panel
The display has a color error, check the pins of the signalcable.
S-Video in- Mini Din connector, RCA jack Audio Left and Right on back
panel
Y, Pb, Pr , HDTV mode audio in Left and Right RCA jacks on back panel
4.
Degaussing problems,When operating the monitor, users may find outthatputtingthe
monitor in different locations or switching directions may render thescreen’s display
colorsabnormal.It is caused by the influence oftheearth’smagneticfield. Afteryou
VideoDot Clock
User Controls
65.0MHz
Power, TV mode, Composite Video mode, S-Video mode, Computer input #1,
Computer input #2 , Channel Select, Numeric keypad, Auto, Mute, CH-LOCK, PIC-
STD, PIC/Page, PIC-Sel, Sleep, Add/Erase, Disp, MTS, System, Fine Tuning, Jump,
Field, Lang, CAP/TXT, CCD, Contrast, Brightness, H. size, H. Position, V. Size
Position, Pincushion, Trapizoid, Bow, Parallelogram, Rotation, Bass, Treble, Balance,
Volume, Sub-Woofer, Background, Instant On, Moire, Red, Green, Blue, Degauss,
Recall, Color Recall.
push the “DEGAUSS”key, the colors should become normal again.
5.
6.
If the display becomes abnormal due to an electrostatic anomaly, switch the power switch
onthemonitoroffwaitforfiveseconds, thenonthemonitorshouldfunctionnormally.
Audio Power
12W
2
Audio Frequency Response
30Hz to 20KHz
No picture on VGA1 or VGA2 (if connected). Monitor may be in standby mode. Make
certain your computer is set to output a signal to the monitor, and it is within the
frequency range of the T series monitor. Refer to Page 2 and Appendix B.
Dimension (w
h
d)
Unit : 27.95in 23.15in 20.04in ; 710 (W) 588 (H) 509 (D)
Carton : 30.49in 27.50in 33.42in ; 772 (W) 698 (H) 595 (D)
Net : 103.4lbs; 47Kg
Auto-switch, 90 - 240V, 50/60Hz
220Wtypical
Gross : 123.2 .bs; 56 Kg
Weight
PowerSupply
If the computerissettooutputasignaltothemonitor, movethemouseorperform
keystroke functions to bring the monitor out of standby (sleep) mode.
PowerConsumption
PowerManagement
AgencyApprovals
Off 8W; Suspend 8W; Stand by 35W; Power on 230W Max
FCC-class B, ULâ, CULâ , DHHS
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Specifications subject to change without notice
15
Model:DM-7752S Specification
Model:DM-6952S Specification
CRT Size/Type
36”Super arch mask with 110 degree magnetic deflection, dynamic focus
forming 33% transmission.
CRT Size/Type
34”Full sguare with 110 degree magnetic deflectio,dynamic focus forming
35.5%transmission.
Dot Pitch
0.9mm
Dot Pitch
0.8mm
Maximum Resolution
Maximum TV Resolution
Recommended Resolution
Display Colors
XGA;1024 768@60Hz
525 lines (NTSC) or 625 lines (PAL)
800 600@75Hz
Maximum Resolution
Maximum TV Resolution
Recommended Resolution
Display Colors
XGA;1024 768@60Hz
525 lines (NTSC) or 625 lines (PAL)
800 600@75Hz
Unlimited
Unlimited
Active Display Area
H-Frequency
27.56in 20.67in; 700mm 525mm
30KHz to 52KHz auto sync
50Hz to 120Hz
Active Display Area
H-Frequency
24.6in 18.31in; 625mm 465mm
30KHz to 52KHz auto sync
50Hz to 120Hz
V-Frequency
V-Frequency
Compatibility
VESAâ 640 480 @ 60Hz, 800 600 @ 60Hz, 1024 768 @ 60Hz
VESAâ 640 480 @ 72Hz, 800 600 @ 72Hz
VESAâ 640 480 @ 75Hz, 800 600 @ 75Hz
VESAâ 640 480 @ 85Hz
Compatibility
VESAâ 640 480 @ 60Hz, 800 600 @ 60Hz, 1024 768 @60Hz
VESAâ 640 480 @ 72Hz, 800 600 @ 72Hz
VESAâ 640 480 @ 75Hz, 800 600 @ 75Hz
â
VESA 640 480 @ 85Hz
NTSC 3.58MHz or PAL 4.43MHz
NTSC 3.58MHz or PAL 4.43MHz
HDTV READY 480P, 720P, 1080i
HDTV READY 480P, 720P, 1080i
Tuner
NTSC (68 channel or CATV 125 channel)
Video : Analog (0.7Vp-p)
Tuner
NTSC (68 channel or CATV 125 channel)
Input Signal
Input Signal
Video : Analog (0.7Vp-p)
Sync. : Separate Sync. TTL Level Positive/Negative
Composite Sync. TTL Level Positive / Negative
Sync. : Separate Sync. TTL Level Positive/Negative
Composite Sync. TTL Level Positive / Negative
Input Connector/Cable
Input Connector/Cable
RGBHVin#1 –15 pin D (VGA), Mini-jack audio, on back panel
RGBHV in #2 – 15 pin D (VGA), RCA jack Left, Right, on front panel
RGBHV out -15 pin D (VGA), RCA jack Left, Right, on back panel.
Switched depending on RGBHV#1 or RGBHV#2.
RGBHV in #1– 15 pin D (VGA), Mini-jack audio, on back panel
RGBHV in #2 – 15 pin D (VGA), RCA jack Left, Right, on front panel
RGBHV out - 15 pin D (VGA), RCA jack Left, Right, on back panel.
Switched depending on RGBHV#1 or RGBHV#2.
Antenna / CATV in –F connector on back panel.
Antenna / CATV in – Fconnector on back panel.
Composite Video in –RCA jacks, Composite Video, Audio Left and Right on back
panel
Composite Video out– RCA jacks, Composite Video, Audio Left and Right on back
panel
S-Video in – Mini Din connector, RCA jack Audio Left and Right on back panel
Y, Pb, Pr , HDTV mode audio in Left and Right RCA jacks on back panel
Composite Video in – RCA jacks, Composite Video, Audio Left and Right
on back panel
Composite Video out– RCA jacks, Composite Video, Audio Left and Right
on back panel
S-Video in– Mini Din connector, RCA jack Audio Left and Right on back
panel
Y, Pb, Pr , HDTV mode audio in Left and Right RCA jacks on back panel
65.0MHz
VideoDotClock
User Controls
VideoDotClock
User Controls
65.0MHz
Power, TV mode, Composite Video mode, S-Video mode, Computer input #1,
Computer input #2, Channel Select, Numeric keypad, Auto, Mute, CH-LOCK, PIC-
STD, PIC/Page, PIC-Sel, Sleep, Add/Erase, Disp, MTS, System, Fine Tuning, Jump,
Field, Lang, CAP/TXT, CCD, Contrast, Brightness, H. Size, H. Position, V. Size, V.
Position, Pincushion, Trapezoid, Bow, Parallelogram, Rotation, Bass, Treble,Balance,
Volume,Sub -Woofer, Background, Instant On, Moire, Red, Green, Blue, Degauss,
Recall,Color Recall
Power, TV mode, Composite Video mode, S-Video mode, Computer input #1,
Computer input #2, Channel Select, Numeric keypad, Auto, Mute, CH-LOCK, PIC-
STD, PIC/Page, PIC-Sel, Sleep, Add/Erase, Disp, MTS, System, Fine Tuning, Jump,
Field, Lang, CAP/TXT, CCD, Contrast, Brightness, H. Size, H. Position, V. Size, V.
Position, Pincushion, Trapezoid, Bow, Parallelogram, Rotation, Bass, Treble, Balance,
Volume, Sub-Woofer, Background, Instant On, Moire, Red, Green, Blue, Degauss,
Recall, Color Recall
Audio Power
12W
2
Audio Power
12W
2
Audio Frequency Response
30Hz to 18KHz
Audio Frequency Response
30Hz to 20KHz
Dimension (w
h
d)
Unit : 32.5in 26.6in 22.25in; 825mm 675mm 565mm
Carton : 36.6in 31.5in 28.54in; 930mm 800mm 725mm
Dimension (w
h
d)
Unit : 35.8in 29.5in 24.4in; 910mm 750mm 620mm
Carton : 41.9in 33.6in 30.5in;1065mm 855mm 775mm
Weight
Net : 145.2lb; 66Kg
Gross : 167.2bs; 76Kg
Weight
Net : 193.6bs; 88Kg
Gross : 217.8bs; 99Kg
PowerSupply
Auto-switch, 90 – 240V, 50/60Hz
230Wtypical
PowerSupply
Auto-switch, 90 – 240V, 50/60Hz
250Wtypical
PowerConsumption
PowerManagement
Agency Approvals
PowerConsumption
PowerManagement
Agency Approvals
Off 8W; Suspend 8W; Stand by 35W; Power On 230W
FCC-class B, ULâ, CULâ , DHHS
Off 8W; Suspend 8W; Stand by 35W;Power On 250W
FCC-class B, ULâ, CULâ , DHHS
Specifications subject to change without notice
Specifications subject to change without notice
Download from Www.Somanuals.com. All Manuals Search And Download.
17
18
VGA CONNECTOR ASSIGNMENT
APPENDIX A : OSD FUNCTION
Screen-1
Screen-2
Screen-3
MAIN MENU
PICTURE
AUDIO
PICTURE
CONTRAST
BRIGHTNESS
H-SIZE
PICTURE
PINCUSHION
TRAPEZOID
BOW
OPTIONS
5
H-POSITION
V-SIZE
PARALLEL.
ROTATION
: DO
MENU : QUIT
PRESET MODE : M01
Hf : 31.5 kHz(-)
: SELECT
V-POSTION
MORE…….
10
MORE…….
: DO
: SELECT
: DO
: SELECT
Vf : 60.1 Hz(-)
MENU : MAIN
Screen-6
OPTIONS
BACKGROUND
INSTANT -ON
MENU : MAIN
Screen-4
Screen-5
AUDIO
PICTURE
R-DRIVE
G-DRIVE
R
G
B
BASS
ON
YES
ON
R
R
TREBLE
BALANCE
VOLUME
G
G
B
B
B-DRIVE
MOIRE
ADJUST MOIRE
---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
Red
1.
2.
3.
4.
5.
6.
DEGAUSS
RECALL
COLOR RECAL
PREVIOUS……
: DO
MENU : MAIN
SUB-WOOFER ON
Green
Blue
: DO
: SELECT
: DO
: SELECT
MENU : MAIN
Hf : 31.5 kHz(-)
Vf : 60.1 Hz(-)
MENU : MAIN
Hf : 31.5 kHz(-)
Vf : 60.1 Hz(-)
: SELECT
Ground
Screen-7
TRAPEZOID
No Connection
R-Ground
G-Ground
B-Ground
No Connection
Ground
CONTRAST
BASS
50%
50%
100%
50%
50%
1100%
TREBLE
BRIGHTNESS
H-SIZE
BOW
7. ---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
---------------------------
8.
BALANCE
100% -------II-----+------------ 20%
PARALLEL.
100%
50%
9.
H-POSITION
VOLUME
ROTATION
100%
100%
30%
0%
10
11
12
13
14
15
R
G
B
V-SIZE
R-DRIVE
MOIRE
Ground
100%
R
SDA
G
B
V-POSITION
PINCUSHION
G-DRIVE
50%
100%
100%
H-sync
R
G
B
B-DRIVE
V-sync
100%
Screen-8
MUTE
SCL
Download from Www.Somanuals.com. All Manuals Search And Download.
19
20
APPENDIX B : FACTORY PRESET MODE
APPENDIX C : REMOTE CONTROLLER
Mode
Resolution
H. freq.
(kHz)
V. freq.
(Hz)
H polarity V polarity
Remarks
1
2
3
31.469
31.469
31.469
59.941
70.087
70.087
VGA
VGA
VGA
640 480
720 400
640 350
4
5
6
37.879
48.363
48.077
60.317
60.004
72.188
VESA
VESA
VESA
800 600
1024 768
800 600
7
8
480P
720P
31.469
45.000
60.000
60.000
N/A
N/A
N/A
N/A
DTV
DTV
9
1080i
33.750
60.000
N/A
N/A
DTV
21
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX C (cont’d) : REMOTE CONTROLLER FUNCTIONAL MATRIX
APPENDIX D : VGA2 IN & PANEL KEYS
Function
CR-440
POWER
POWER ON/OFF
reserved
S E L + / C H +
REMOTE CONTROLS TV
REMOTE CONTROLS VCR
VGA1/VGA2
TV/CATV
VOL
VOL DEGAUSS POWER
TV/PC/AV
REMOTE CONTROLS CABLE BOX
REMOTE CONTROLS AUXILLIARY DEVICE
NUMERIC KEY DIRECT INPUT (TV MODE)
NUMERIC KEY DIRECT INPUT (TV MODE)
NUMERIC KEY DIRECT INPUT (TV MODE)
NUMERIC KEY DIRECT INPUT (TV MODE)
NUMERIC KEY DIRECT INPUT (TV MODE)
NUMERIC KEY DIRECT INPUT (TV MODE)
NUMERIC KEY DIRECT INPUT (TV MODE)
NUMERIC KEY DIRECT INPUT (TV MODE)
NUMERIC KEY DIRECT INPUT (TV MODE)
NUMERIC KEY DIRECT INPUT (TV MODE)
AUDIO MUTING
DIGIT 1
MENU
DIGIT 2
VGA2 IN
L
R
DIGI T 3
AUDIO2 IN
SEL-/ CH-
DIGIT 4
DIGIT 5
DIGIT 6
DIGIT 7
DIGIT 8
DIGIT 9
DIGIT 0
MUTE
SLEEP
SLEEP TIMER
VOLUME UP
VOLUME DOWN
CHANNEL UP
CHANNEL DOWN
JUMP
VOLUME UP
VOLUME DOWN
CHANNEL UP
CHANNEL DOWN
JUMP TO LAST TV CHANNEL SELECTED
ENTER PARENTAL CONTROL MENU
FINE TUNE DOWN
CH -LOCK
FINE TUNE DOWN
FINE TUNE UP
SEL+
FINE TUNE UP
CURSOR UP IN OSD MENU
SEL -
CURSOR DOWN IN OSD MENU
“DO” SELECTED FUNCTION IN OSD MENU
“DO” SELECTED FUNCTION IN OSD MENU
OSD MENU ON/OFF
VOL -
VOL +
MENU
SYSTEM
DISP
DECODERMODE–NTSC / PAL / SECAM
DISPLAYS INPUT MODE ON-SCREEN
TV
SELECTS TV INPUT DIRECT
VIDEO
S-VIDEO
VGA-1
VGA-2
SELECTS VIDEO (RCA) INPUT DIRECT
SELECTS S-VIDEO INPUT DIRECT
SELECTS VGA1 (REAR) INPUT DIRECT
SELECTS VGA2(FRONT) INPUT DIRECT
PC/TV/AV
PIC-STD
SELECTS HDTV VIDEO INPUT DIRECT
RECALL PICTURE DEFAULT SETTINGS IN TV MODE
PIC/PAGE DOWN
PIC/PAGE UP
DECREASE PICTURE ADJUSTMENT
INCREASE PICTURE ADJUSTMENT
PIC-SEL
FIELD
SELECTPICTUREADJUSTMENT
SELECTS FIELD 1/FIELD2
LANG
SELECTS CLOSED-CAPTION LANGUAGE
SELECTS CLOSED-CAPTION DISPLAY STYLE
CAP/TXT
CCD
AUTO
CLOSED-CAPTION DISPLAY ON/OFF
INITIATE TUNER CHANNEL SETUP
ADD/ERASE
ADD/ERASE CHANNELS
MTS
MULTILINGUALAUDIOSELECTION
TV/CATV
SELECTSTUNER/CABLESTANDARD (When TV modes selected)
SELECTS FRONT/REAR VGA INPUT(When VGA mode selected)
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Series Warranty
Monivision Graphic Systems HDTV Products purchased in the United States
and Canada are warranted to be free from defects in materials or
workmanship for a period of one (1) year from the date of their original retail
purchase. If the unit fails to conform to this warranty, we will service the
monitor in the field using new or refurbished parts.
To obtain warranty service in the United States, you must first contact our
Technical Support Department at (800) 714-893-8113ext.108 or 113, 8:30 am-
4:30 pm PST. If we determine the product requires repair, we will request your
original or a machine reproduction of a dated proof-of-purchase document
describing it, along with requisite pertinent information in order to initiate Field
Service.
This warranty does not cover defects, malfunctions or failures resulting from
shipping or transit accidents, abuse, misuse, operation contrary to furnished
instructions, operation on incorrect power supplies, operation with faulty
associated equipment, modification, alteration, improper servicing, tampering
or normal w ear and tear or TVs on which the serial number has been removed
or defaced. Phosphor burns, purity and misconvergence problems and
geometric distortion resulting from normal CRT aging, operating at excessive
brightness levels for extended periods or mishan dling are not covered by this
warranty.
ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR
A
PARTICULAR PURPOSE SHALL BE
LIMITED IN DURATION TO THE PERIOD OF TIME SET FORTH ABOVE. OUR
LIABILITY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY
CAUSE WHATSOEVER, INCLUDING OUR NEGLIGENCE , ALLEGED DAMAGE OR
DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE DISCOVERABLE OR
LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE
MONITOR. WE SHALL NOT BE RESPONSIBLE FOR LOS S OF USE, COMMERCIAL
LOSS OR OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS
OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO
YOU. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state. This is the only warranty applicable;
no one is authorized to extend or modify it or to grant any other warranty.
DM-5948S/DM -6952S/DM-7752S
DC-001417
Ref: 11/14DM-5948S03A00
Ref: 11/14DM-6952S02A00
Ref: 11/14DM -7752S03A00
Part#: 00300000117
24
731-1000-17632
Download from Www.Somanuals.com. All Manuals Search And Download.
|