Owner’s Manual
The Ultimate In Style & Performance®
Exeter, PA
St. Catharines, ON
1-800-800-8586
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N T E N T S
I.
INTRODUCTION......................................................................................................................... 4
II. SAFETY ......................................................................................................................................... 5
III. EMI/RFI ........................................................................................................................................ 16
IV. SPECIFICATIONS ................................................................................................................... 17
V. YOUR SCOOTER...................................................................................................................... 19
VI. BATTERIES AND CHARGING ............................................................................................ 22
VII. OPERATION............................................................................................................................... 28
VIII.COMFORT ADJUSTMENTS................................................................................................ 30
IX. DISASSEMBLY AND ASSEMBLY ..................................................................................... 32
X. BASIC TROUBLESHOOTING ............................................................................................. 35
XI. CARE AND MAINTENANCE ................................................................................................ 37
XII. WARRANTY................................................................................................................................ 40
Revo
3
Download from Www.Somanuals.com. All Manuals Search And Download.
I . I N T R O D U C T I O N
SAFETY
WELCOME to Pride Mobility Products Corporation (Pride). The product you have purchased combines state-of
the-art components with safety, comfort, and styling in mind. We are confident the design features will provide you
with the conveniences you expect during your daily activities. Understanding how to safely operate and care for
this product should bring you years of trouble free operations and service.
Read and follow all instructions, warnings, and notes in this manual and all other accompanying literature before
attempting to operate this product for the first time. In addition, your safety depends upon you, as well as your
provider, caretaker, or healthcare professional in using good judgement.
If there is any information in this manual which you do not understand, or if you require additional assistance for
setup or operation, please contact your authorized Pride Provider. Failure to follow the instructions, warnings,
and notes in this manual and those located on your Pride product can result in personal injury or product
damage and will void Pride’s product warranty.
PURCHASER’S AGREEMENT
By accepting delivery of this product, you promise that you will not change, alter, or modify this product or remove
or render inoperable or unsafe any guards, shields, or other safety features of this product; fail, refuse, or neglect to
install any retrofit kits from time to time provided by Pride to enhance or preserve the safe use of this product.
INFORMATION EXCHANGE
We want to hear your questions, comments, and suggestions about this manual. We would also like to hear about
the safety and reliability of your new scooter, and about the service you received from your authorized Pride
Provider. Please notify us of any change of address, so we can keep you apprised of important information about
safety, new products, and new options that can increase your ability to use and enjoy your scooter. Please feel free
to contact us at the address below:
Pride Mobility Products Corporation
Attn: Customer Care Department
182 SusquehannaAve.
Exeter, PA18643-2694
NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact
us and we will be glad to send you a new one immediately.
PRIDE OWNERS CLUB
As an owner of a Pride product, you are encouraged to enroll in the Pride Owners Club. Complete and return your
From our home page, select “Owners Club” to enter a page dedicated to current and potential Pride product
owners.You will gain access to interviews, stories, recreation ideas, daily living tips, product and funding informa-
tion, and interactive message boards. These message boards invite you to communicate with other Pride custom-
ers as well as Pride representatives who are available to assist you with any questions or concerns.
Revo
4
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
PRODUCT SAFETY SYMBOLS
The symbols below are used on the scooter to identify warnings, mandatory actions, and prohibited actions. It is
very important for you to read and understand them completely.
Pinch/Crush points created during assembly.
Corrosive chemicals contained in battery. Use only AGM or Gel-Cell batteries to
reduce the risk of leakage or explosive conditions.
EMI-RFI- This product has been tested and passed at an immunity level of 20 V/m.
Read and follow the information in the owner’s manual.
Maximum seating weight.
Unlocked and in freewheel mode.
Place unit on level ground and stand behind or to one side when changing from
drive mode to freewheel mode or freewheel mode to drive mode.
Locked and in drive mode.
Revo
5
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
GENERAL
MANDATORY! Do not operate your new scooter for the first time without completely reading
and understanding this owner’s manual.
Your scooter is a state-of-the-art life-enhancement device designed to increase mobility. Pride provides an exten-
sive variety of products to best fit the individual needs of the scooter user. Please be aware that the final selection
and purchasing decision regarding the type of scooter to be used is the responsibility of the scooter user who is
capable of making such a decision and his/her healthcare professional (i.e., medical doctor, physical therapist, etc.).
The contents of this manual are based on the expectation that a mobility device expert has properly fitted the
scooter to the user and has assisted the prescribing healthcare professional and/or the authorized Pride Provider in
the instruction process for the use of the product.
There are certain situations, including some medical conditions, where the scooter user will need to practice
operating the scooter in the presence of a trained attendant.Atrained attendant can be defined as a family member
or care professional specially trained in assisting a scooter user in various daily living activities.
As you begin using your scooter during daily activities, you will probably encounter situations in which you will
need some practice. Simply take your time and you will soon be in full and confident control as you maneuver
through doorways, on and off elevators, up and down ramps, and over moderate terrain.
Below are some precautions, tips, and other safety considerations that will help you become accustomed to
operating the scooter safely.
MODIFICATIONS
Pride has designed and engineered your scooter to provide maximum mobility and utility.Awide range of acces-
sories is available from your authorized Pride Provider to further customize your scooter to better suit your needs
and/or preferences. However, under no circumstances should you modify, add, remove, or disable any feature,
part, or function of your scooter.
WARNING! Do not modify your scooter in any way not authorized by Pride. Unauthorized
modifications may result in personal injury and/or damage to your scooter.
REMOVABLE PARTS
WARNING! Prevent personal injury and/or product damage! Do not attempt to lift or move
your scooter by any of its removable parts, including the armrests, seat, or shroud.
Revo
7
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
GENERAL
MANDATORY! Do not operate your new scooter for the first time without completely reading
and understanding this owner’s manual.
Your scooter is a state-of-the-art life-enhancement device designed to increase mobility. Pride provides an exten-
sive variety of products to best fit the individual needs of the scooter user. Please be aware that the final selection
and purchasing decision regarding the type of scooter to be used is the responsibility of the scooter user who is
capable of making such a decision and his/her healthcare professional (i.e., medical doctor, physical therapist, etc.).
The contents of this manual are based on the expectation that a mobility device expert has properly fitted the
scooter to the user and has assisted the prescribing healthcare professional and/or the authorized Pride Provider in
the instruction process for the use of the product.
There are certain situations, including some medical conditions, where the scooter user will need to practice
operating the scooter in the presence of a trained attendant.Atrained attendant can be defined as a family member
or care professional specially trained in assisting a scooter user in various daily living activities.
As you begin using your scooter during daily activities, you will probably encounter situations in which you will
need some practice. Simply take your time and you will soon be in full and confident control as you maneuver
through doorways, on and off elevators, up and down ramps, and over moderate terrain.
Below are some precautions, tips, and other safety considerations that will help you become accustomed to
operating the scooter safely.
MODIFICATIONS
Pride has designed and engineered your scooter to provide maximum mobility and utility.Awide range of acces-
sories is available from your authorized Pride Provider to further customize your scooter to better suit your needs
and/or preferences. However, under no circumstances should you modify, add, remove, or disable any feature,
part, or function of your scooter.
WARNING! Do not modify your scooter in any way not authorized by Pride. Unauthorized
modifications may result in personal injury and/or damage to your scooter.
REMOVABLE PARTS
WARNING! Prevent personal injury and/or product damage! Do not attempt to lift or move
your scooter by any of its removable parts, including the armrests, seat, or shroud.
Revo
7
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
PRE-RIDE SAFETY CHECK
Get to know the feel of your scooter and its capabilities. Pride recommends that you perform a safety check before
each use to make sure your scooter operates smoothly and safely.
Perform the following inspections prior to using your scooter:
! Check for proper tire inflation (if equipped with pneumatic tires).
! Check all electrical connections. Make sure they are tight and not corroded.
! Check all harness connections. Make sure they are secured properly.
! Check the brakes.
! Check battery charge.
If you discover a problem, contact your authorized Pride Provider for assistance.
TIRE INFLATION
If your scooter is equipped with pneumatic tires, you should check or have the air pressure checked regularly.
Proper inflation pressures will prolong the life of your tires and help ensure the smooth operation of your scooter.
WARNING! It is critically important that 30-35 psi tire pressure be maintained in pneumatic
tires at all times. Do not underinflate or overinflate your tires. Low pressure may result in
loss of control, and overinflated tires may burst. Failure to maintain 30-35 psi tire pressure
in pneumatic tires at all times may result in tire and/or wheel failure, causing serious
personal injury and/or damage to your scooter.
WARNING! Inflate your scooter tires from a regulated air source with an available pressure
gauge. Inflating your tires from an unregulated air source could overinflate them, resulting
in a burst tire and/or personal injury.
WEIGHT LIMITATIONS
Your scooter is rated for a maximum weight capacity. Refer to the specifications table for information.
WARNING! Exceeding the weight capacity voids your warranty and may result in personal
injury and damage to your scooter. Pride will not be held responsible for injuries and/or
property damage resulting from failure to observe weight limitations.
WARNING! Do not carry passengers on your scooter. Carrying passengers may result in
personal injury and/or property damage.
INCLINE INFORMATION
More and more buildings have ramps with specified degrees of inclination, designed for easy and safe access.
Some ramps may have turning switchbacks (180-degree turns) that require you to have good cornering skills on
your scooter.
! Proceed with extreme caution as you approach the downgrade of a ramp or other incline.
! Take wide swings with your scooter around any tight corners. If you do that, the scooter’s rear wheels will
follow a wide arc, not cut the corner short, and not bump into or get hung up on any railing corners.
! When driving down a ramp, keep the scooter’s speed adjustment set to the slowest speed setting to ensure a
safely controlled descent.
! Avoid sudden stops and starts.
Revo
8
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
When climbing an incline, try to keep your scooter moving. If you must stop, start up again slowly, and then
accelerate cautiously. When driving down an incline, do so by setting the speed adjustment dial to the slowest
setting and driving in the forward direction only. If your scooter starts to move down the incline faster than you
anticipated or desired, allow it to come to a complete stop by releasing the throttle control lever. Then push the
throttle control lever forward slightly to ensure a safely controlled descent.
WARNING! When climbing an incline, do not zigzag or drive at an angle up the face of the
incline. Drive your scooter straight up the incline. This greatly reduces the possibility of a
tip or a fall. Always exercise extreme caution when negotiating an incline.
WARNING! Do not drive your scooter across the side of an incline or diagonally up or down
an incline; do not stop, if possible, while driving up or down an incline.
WARNING! You should not travel up or down a potentially hazardous incline (i.e., areas
covered with snow, ice, cut grass, or wet leaves).
WARNING! When on any sort of an incline or decline, never place the scooter in freewheel
mode while seated on it or standing next to it.
WARNING! Even though your scooter is capable of climbing slopes greater than those
illustrated in figures 1, 1A, and 1B do not, under any circumstances, exceed the incline
guidelines or any other specifications presented in this manual. Doing so could cause
instability in your scooter, resulting in personal injury and/or damage to your scooter.
Handicap public access ramps are not subject to government regulation in all countries, and therefore do not
necessarily share the same standard percent of slope. Other inclines may be natural or, if man-made, not designed
specifically for scooters. Figures 1, 1Aand 1B illustrate your scooter’s stability and its ability to climb grades under
various weight loads and under controlled testing conditions.
These tests were conducted with the scooter’s seat in the highest position and adjusted rearward on the seat base
to its farthest rearward position. Use this information as a guideline.Your scooter’s ability to travel up inclines is
affected by your weight, your scooter’s speed, your angle of approach to the incline, and your scooter setup.
150-200LBS 250LBS
9° (15.8%) 8° (14.1%)
300LBS
6° (10.5%)
150-200LBS 250LBS
8° (14.1%) 7° (12.3%)
300LBS
7° (12.3%)
Figure 1A.4-wheel Maximum Recommended Incline Angles
Figure 1. 3-wheel Maximum Recommended Incline Angles
200-250 LBS
6° (10.5%)
150LBS
7° (12.3%)
300LBS
5° (8.7%)
Figure 1B. Maximum Recommended Incline Angles (With OxygenTank)
WARNING! Any attempt to climb or descend a slope steeper than what is shown in figures 1, 1A,
and 1B may put your scooter in an unstable position and cause it to tip, resulting in personal
injury.
WARNING! Never carry an oxygen tank weighing more than 13 lbs. Never fill the rear
basket with contents exceeding 13 lbs.
Revo
9
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
When you approach an incline, it is best to lean forward. See figures 2 and 2A. This shifts the center of gravity of
you and your scooter toward the front of the scooter for improved stability.
NOTE: When negotiating ramps, if the throttle control lever is released while moving forward, the
powered scooter may "rollback" approximately 1 foot before the brake engages. If the throttle control
lever is released while moving in reverse, the powered scooter may "rollback" approximately one meter
3 feet before the brake engages.
Figure 2A. Increased Stability Driving Position
Figure 2. Normal Driving Position
CORNERING INFORMATION
Excessively high cornering speeds can create the possibility of tipping. Factors which affect the possibility of
tipping include, but are not limited to, cornering speed, steering angle (how sharply you are turning), uneven road
surfaces, inclined road surfaces, riding from an area of low traction to an area of high traction (such as passing from
a grassy area to a paved area – especially at high speed while turning), and abrupt directional changes. High
cornering speeds are not recommended. If you feel that you may tip over in a corner, reduce your speed and
steering angle (i.e., lessen the sharpness of the turn) to prevent your scooter from tipping.
WARNING! When cornering sharply, reduce your speed. When using your scooter at higher
speeds, do not corner sharply. This greatly reduces the possibility of a tip or fall. To avoid
personal injury or property damage, always exercise common sense when cornering.
BRAKING INFORMATION
Your scooter is equipped with these powerful brake systems:
! Regenerative: Uses electricity to rapidly slow the vehicle when the throttle control lever returns to the center/
stop position.
! Disc Park Brake:Activates mechanically after regenerative braking slows the vehicle to near stop, or when
power is removed from the system for any reason.
Revo
10
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
OUTDOOR DRIVING SURFACES
Your scooter is designed to provide optimum stability under normal driving conditions—dry, level surfaces com-
posed of concrete, blacktop, or asphalt. However, Pride recognizes that there will be times when you will encoun-
ter other surface types. For this reason, your scooter is designed to perform admirably on packed soil, grass, and
gravel. Feel free to use your scooter safely on lawns and in park areas.
! Reduce your scooter’s speed when driving on uneven terrain and/or soft surfaces.
! Avoid tall grass that can become tangled in the running gear.
! Avoid loosely packed gravel and sand.
! If you feel unsure about a driving surface, avoid that surface.
PUBLIC STREETS AND ROADWAYS
WARNING! You should not operate your scooter on public streets and roadways. Be aware
that it may be difficult for traffic to see you when you are seated on your scooter. Obey all
local pedestrian traffic rules. Wait until your path is clear of traffic, and then proceed with
extreme caution.
NOTE: Safety accessories like fluorescent flags are available to order from your authorized
Pride Provider.
STATIONARY OBSTACLES (STEPS, CURBS, ETC.)
WARNING! Do not drive near raised surfaces, unprotected ledges, and/or drop-offs (curbs,
porches, stairs, etc.).
WARNING! Do not attempt to have your scooter climb or descend an obstacle that is
inordinately high. Serious personal injury and/or damage may result.
WARNING! Do not attempt to have your scooter proceed backward down any step, curb, or
other obstacle. This may cause the scooter to tip and cause personal injury.
WARNING! Be sure your scooter is traveling perpendicular to any curb you may be required
to ascend or descend. See figures 3 and 3A.
WARNING! Do not attempt to negotiate a curb that has a height greater than 2 in.
Figure 3A. Incorrect Curb Approach
Figure 3. Correct Curb Approach
Revo
11
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
INCLEMENT WEATHER PRECAUTIONS
Exposure of your scooter to inclement weather conditions should be avoided whenever possible. If suddenly
caught up in rain, snow, severe cold or heat while operating your scooter, proceed to shelter at the earliest
opportunity. Thoroughly dry your scooter before storing, charging, or operating your scooter.
WARNING! Operating in rain, snow, salt, mist/spray conditions, and on icy/slippery surfaces
can cause personal injury and/or damage to the scooter and electrical system. Maintain
and store your scooter in a dry and clean condition.
FREEWHEEL MODE
Your scooter is equipped with a manual freewheel lever that, when pushed forward, allows the scooter to be pushed.
For more information about how to place your scooter into and out of freewheel mode, seeV. “Your Scooter.”
WARNING! When your scooter is in freewheel mode, the braking system is disengaged.
! Disengage the drive motors only on a level surface.
! Ensure the key is removed from the key switch.
! Stand behind the scooter to engage or disengage freewheel mode. Never sit on a
scooter to do this.
! After you have finished pushing your scooter, always return it to the drive mode to lock
the brakes.
Failure to heed the above could result in personal injury and/or damage to your scooter.
An added feature built into the scooter is “push-too-fast” protection which safeguards the scooter against gaining
excessive speed while in freewheel mode.
“Push-too-fast” operates differently depending on which of two conditions exists:
! If the key is removed from the key switch while in freewheel mode, the scooter’s controller activates regenera-
tive braking when the scooter is pushed faster than a maximum threshold which has been preprogrammed. In
this case, the controller is acting as a speed governor.
! If the key is inserted into the key switch while in freewheel mode, you will encounter considerable resistance at
any speed. This prevents the scooter from gaining unwanted momentum should the manual freewheel lever
inadvertently be released while driving the scooter.
STAIRS AND ESCALATORS
Scooters are not designed to travel up or down stairs or escalators. Always use an elevator.
WARNING! Do not use your scooter to negotiate steps or escalators. You may cause injury
to yourself and to others and/or damage your scooter.
Revo
12
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
DOORS
! Determine if the door opens toward or away from you.
! Use your hand to turn the knob or push the handle or push-bar.
! Drive your scooter gently and slowly forward to push the door open. Or drive your scooter gently and slowly
backwards to pull the door open.
ELEVATORS
Modern elevators have a door edge safety mechanism that, when pushed, reopens the door(s).
! If you are in the doorway of a elevator when the door(s) begin to close, push on the rubber door edge or allow
the rubber door edge to contact the scooter and the door will reopen.
! Use care that pocketbooks, packages, or scooter accessories do not become caught in elevator doors.
LIFT/ELEVATION PRODUCTS
If you will be traveling with your scooter, you may find it necessary to use a lift/elevation product to aid in transpor-
tation. Pride recommends that you closely review the instructions, specifications, and safety information set forth
by the manufacturer of the lift/elevation product before using that product.
WARNING! Never sit on your scooter when it is being used in connection with any type of
lift/elevation product. Your scooter was not designed with such use in mind and any damage
or injury incurred from such use is not the responsibility of Pride.
BATTERIES
In addition to following the warnings below, be sure to comply with all other battery handling information.
WARNING! Scooter batteries are heavy (refer to specifications table). Lifting weight
beyond your capacity could result in personal injury. If necessary, get someone physically
able to lift the scooter batteries for you.
WARNING! Battery posts, terminals, and related accessories contain lead and lead
compounds. Wash hands after handling.
WARNING! Always protect the batteries from freezing and never charge a frozen battery.
Charging a frozen battery may result in personal injury and/or damage to the battery.
WARNING! RED (+) cables must be connected to positive (+) battery terminals/posts. BLACK
(-) cables must be connected to negative (-) battery terminals/posts. Failure to connect
your battery cables and harnesses in the proper manner may result in personal injury and/
or damage to your scooter. REPLACE cables immediately if damaged.
BATTERY DISPOSAL AND RECYCLING
If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and call your authorized
Pride Provider for instructions on disposal. Your authorized Pride Provider will also have the necessary informa-
tion on battery recycling, which is our recommended course of action.
Revo
13
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
MOTOR VEHICLE TRANSPORT
Pride recommends that you do not remain seated in your scooter while traveling in a motor vehicle. The
scooter should be stowed in the trunk of a car or in the back of a truck or van with the batteries removed and
properly secured.
WARNING! Although your scooter may be equipped with a positioning belt, this belt is not
designed to provide restraint during motor vehicle transport. Anyone travelling in a motor
vehicle should be properly secured in the motor vehicle seat with safety belts fastened
securely.
WARNING! Do not sit on your scooter while it is in a moving vehicle. Personal injury and/or
property damage may result.
WARNING! Always be sure your scooter and its batteries are properly secured when it is
being transported. Failure to do so may result in personal injury and/or damage to your
scooter.
PREVENTING UNINTENDED MOVEMENT
WARNING! If you anticipate being seated in a stationary position for an extended period
of time, turn off the power. This will prevent unexpected motion from inadvertent throttle
control lever contact. Failure to do so may result in personal injury.
GETTING ONTO AND OFF OFYOUR SCOOTER
Getting onto and off of your scooter requires a good sense of balance. Please observe the following safety tips
when getting onto and off of your scooter:
! Remove the key from the key switch.
! Ensure that your scooter is not in freewheel mode. See V. “Your Scooter.”
! Make certain that the seat is locked into place.
! The armrests of the seat can be flipped up to make getting onto and off of the scooter easier.
WARNING! When driving on level ground, position yourself as far back as possible in the
scooter seat to prevent the scooter from tipping and causing injury.
WARNING! Prevent personal injury and product damage! Avoid putting all of your weight
on the scooter armrests and do not use the armrests for weight bearing purposes, such as
transfers. Such use may cause the scooter to tip, resulting in a fall from the scooter.
WARNING! Avoid putting all of your weight on the floorboard. Such use may cause the
scooter to tip and cause personal injury.
REACHING AND BENDING
Avoid reaching or bending while driving your scooter. Bending forward creates the risk of accidental throttle
control lever contact. Bending to the side while seated creates the risk of tipping. It is important to maintain a stable
centre of gravity and keep the scooter from tipping. Pride recommends that the scooter user determine his/her
personal limitations and practice bending and reaching in the presence of a qualified attendant.
WARNING! Do not bend, lean, or reach for objects if you have to pick them up from the
scooter deck or from either side of the scooter. Movements such as these may change
your centre of gravity and the weight distribution of the scooter and cause your scooter to
tip, possibly resulting in personal injury.
WARNING! Prevent personal injury! Keep your hands away from the tires when driving. Be
aware that loose fitting clothing can become caught in drive tires.
Revo
14
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
POSITIONING BELTS
Your authorized Pride Provider, therapist(s), and other healthcare professionals are responsible for determining
your requirement for a positioning belt in order to operate your scooter safely.
WARNING! If you require a positioning belt to safely operate your scooter, make sure it is
fastened securely. Serious personal injury may result if you fall from the scooter.
PRESCRIPTION DRUGS/PHYSICAL LIMITATIONS
The scooter user must exercise care and common sense when operating his/her scooter.This includes awareness of
safetyissueswhentaking prescribed or over-the-counter drugs or when the user has specific physical limitations.
WARNING! Consult your physician if you are taking prescribed or over-the-counter
medication or if you have certain physical limitations. Some medications and limitations
may impair your ability to operate your scooter in a safe manner.
ALCOHOL
The scooter user must exercise care and common sense when operating his/her scooter. This includes awareness
of safety issues while under the influence of alcohol.
WARNING! Do not operate your scooter while you are under the influence of alcohol, as
this may impair your ability to drive safely.
Revo
15
Download from Www.Somanuals.com. All Manuals Search And Download.
I I I . E M I / R F I
ELECTROMAGNETIC AND RADIO FREQUENCY INTERFERENCE (EMI/RFI)
WARNING! Laboratory tests have shown that electromagnetic and radio frequency waves
can have an adverse affect on the performance of electrically-powered mobility vehicles.
Electromagnetic and Radio Frequency Interference can come from sources such as cellular phones, mobile two-
way radios (such as walkie-talkies), radio stations, TV stations, amateur radio (HAM) transmitters, wireless
computer links, microwave signals, paging transmitters and medium-range mobile transceivers used by emergency
vehicles. In some cases, these waves can cause unintended movement or damage to the control system. Every
electrically-powered mobility vehicle has an immunity (or resistance) to EMI. The higher the immunity level, the
greater the protection against EMI. This product has been tested and has passed at an immunity level of 20 V/M.
WARNING! Be aware that cell phones, two-way radios, laptops, and other types of radio
transmitters may cause unintended movement of your electrically-powered mobility vehicle
due to EMI. Exercise caution when using any of these items while operating your mobility
vehicle and avoid coming into close proximity of radio and TV stations.
WARNING! The addition of accessories or components to the electrically-powered mobility
vehicle can increase the susceptibility of the vehicle to EMI. Do not modify your scooter in
any way not authorized by Pride.
WARNING! The electrically-powered mobility vehicle itself can disturb the performance
of other electrical devices located nearby, such as alarm systems.
unintended motion or brake release occurs, turn the scooter off as soon as it is safe to do so. Call Pride
at 800-424-8205 to report the incident.
Revo
16
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . S P E C I F I C A T I O N S
3-wheel: SC63
4-wheel: SC64
Revo Red, Revo Blue
3-wheel: 43.25 in.
4-wheel: 44.75 in.
21.5 in.
Model Numbers
Available Colors
Overall Length2
Overall Width2
3-wheel: 168.5 lbs.
Total weight including Batteries
4-wheel: 187 lbs.
3-wheel: 106.5 lbs.
4-wheel: 125 lbs.
Total Weight Without Battery
Packs
3-wheel: rear section 48 lbs.
4-wheel: front section 51.5 lbs.
3-wheel: 38 in.
Heaviest Piece When Disassembled
Turning Radius2
4-wheel: 50 in.
Variable up to 4.5 mph
(35 AH batteries) Up to 20 miles
2.25 in.
300 lbs. Maximum
Type: Foldable molded plastic
Material: Black vinyl with Charcoal fabric center
Dimensions: 17 in. width
16 in. depth
Speed (maximum) 1
Range Per Charge1
Ground Clearance2
Weight Capacity
Standard Seating
12 in. height
Rear-wheel drive, sealed transaxle, with 24 volt, DC motor
Electronic, regenerative, and electromechanical
3-wheel front: molded plastic
3-wheel rear: aluminum mags
4-wheel front: aluminum mags
4-wheel rear: aluminum mags
Type: solid, flat-free
Drive System
Dual Braking System
Wheels
Tires
Front: 2 in. x 8 in.
Rear: 3 in. x 9 in.
Type: (2) 12-volt, deep cycle (AGM or Gel-Cell type recommended)
Size: U1 (35 AH)
Battery pack weight: 31 lbs. each
Off-board charger
Battery Requirements
Battery Charger
(1) Varies with user weight, terrain type, battery amp-hour (AH raiting), battery charge, battery condition, and tire condition.
(2) Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of (+ or – ) 3 %.
NOTE: All specifications subject to change without notice.
Revo
17
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . S P E C I F I C A T I O N S
12"
17"-19"
2.25"
3-wheel 43.25"
17"
4-wheel 44.75"
16"
17.24"
3-wheel 38"
4-wheel 50"
Turning Radius
21.5"
Figure 4. Scooter Dimensions
3"
2"
9"
8"
Figure 4A. FrontTire Dimensions
Figure 4B. Rear Tire Dimensions
Revo
18
Download from Www.Somanuals.com. All Manuals Search And Download.
V . Y O U R S C O O T E R
TILLER CONSOLE
The tiller console houses all controls needed to drive your scooter, including the speed adjustment dial, key switch,
throttlecontrollever, batterycondition meter, running lights switch, and hornbuttons. Seefigure 5.
WARNING! Do not expose the tiller console to moisture. In the event that the tiller console
does become exposed to moisture, do not attempt to operate your scooter until the tiller
console has dried thoroughly.
RUNNING LIGHTS SWITCH
STATUS LED
SPEED ADJUSTMENT DIAL
KEY
BATTERY CONDITION METER
KEY SWITCH
HAND GRIP
HORN BUTTON
HORN BUTTON
THROTTLE CONTROL LEVER
(REVERSE)
THROTTLE CONTROL LEVER
(FORWARD)
Figure 5.Tiller Console
Key Switch
! Insert the key into the key switch and turn it clockwise topower up (turn on) your scooter.
! Turn the key counterclockwisetopower down (turn off) your scooter.
Although the key can be left in the key switch when the scooter is powered down, we recommend removing it to
prevent unauthorized use of your scooter.
WARNING! If the key is moved to the “off” position while your scooter is in motion, the
electronic brakes engage and your scooter will come to an abrupt stop!
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your scooter up to the maximum
speed you preset with the speed adjustment dial.
! Place your right hand on the right handgrip and your left hand on the left handgrip.
! Use your right thumb to push the right side of the lever to disengage your scooter’s brakes and move forward.
! Release the lever and allow your scooter to come to a complete stop before pushing the other side of the lever
to move in reverse.
! When the throttle is completely released, it automatically returns to the center “stop” position and engages your
scooter’s brakes.
Running Lights Switch
This button controls your scooter’s front and rear running lights.
! Toggle the switch forward to turn on the running lights.
! Toggle the switch back to turn off the running lights.
Revo
19
Download from Www.Somanuals.com. All Manuals Search And Download.
V . Y O U R S C O O T E R
Horn Button
These buttons activates a warning horn. Your scooter must be turned on for the horn to be operational. Do not
hesitate to use the warning horn when doing so may prevent accident or injury.
Status LED
The status LED will alert you to electrical problems that may occur with the scooter. The LED remains constantly
lit while your scooter is on. If the scooter develops an electrical problem, the status LED will flash a code. See X.
“Basic Troubleshooting” for flash codes. If the status LED flashes a code other than a code listed, contact your
authorized Pride Provider.
Battery Condition Meter
The battery condition meter indicates the approximate strength of your batteries while the scooter is on.
Speed Adjustment Dial
This dial allows you to select a maximum speed.
! The picture of the tortoise represents the slowest speed setting.
! The picture of the hare represents the fastest speed setting.
REAR SECTION
The manual freewheel lever, anti-tip wheels, battery packs, and the motor/transaxle assembly (not shown) are
located on the rear section of your scooter. See figure 6.
LEFT BATTERY PACK
RIGHT BATTERY PACK
CHARGER POWER CORD
RECEPTACLE
MAIN CIRCUIT BREAKER
(RESET BUTTON)
MANUAL FREEWHEEL
LEVER
ANTI-TIP WHEELS
Figure 6. Rear Section
Anti-TipWheels
The anti-tip wheels are an integral and important safety feature of your scooter. Do not, under any circumstances,
remove the anti-tip wheels from your scooter.
PROHIBITED! Do not remove the anti-tip wheels or modify your scooter in any way that is
not authorized by Pride.
Revo
20
Download from Www.Somanuals.com. All Manuals Search And Download.
V . Y O U R S C O O T E R
Battery Packs
The scooter is equipped with two easy-to-remove battery packs. The packs contain the charger power cord
receptacle, the main circuit breaker (reset button), and the batteries. The batteries store electrical energy that
powers your scooter. See VI. “Batteries and Charging.”
Charger Power Cord Receptacle
The charger power cord plugs into your scooter’s battery charger by means of the charger power cord receptacle.
Main Circuit Breaker (Reset Button)
When the voltage in your scooter’s batteries becomes low or the scooter is heavily strained because of excessive
loads or steep inclines, the main circuit breaker may trip to protect the motor and electronics from damage.
! The main circuit breaker reset button pops out when the breaker trips.
! When the breaker trips, the entire electrical system of your scooter shuts down.
! Allow a minute or two for your scooter’s electronics to “rest.”
! Push in the reset button to reset the main circuit breaker.
! If the main circuit breaker trips frequently, you may need to charge your batteries more often. You may also
need to have your authorized Pride Provider perform a load test on your scooter’s batteries.
Manual Freewheel Lever
Whenever you need or want to push your scooter for short distances, you can put it in freewheel mode.
1. Push forward on the manual freewheel lever to disable the drive system and the brake system. You may now
push your scooter.
2. Push the manual freewheel lever backward to reengage the drive and the brake systems; this takes your
scooter out of freewheel mode.
WARNING! When your scooter is in freewheel mode, the braking system is disengaged.
!
!
!
Disengage the drive motors only on a level surface.
Ensure the key is removed from the key switch.
Stand behind the scooter to engage or disengage freewheel mode. Never sit on a
scooter to do this.
After you have finished pushing your scooter, always return it to the drive mode to lock
the brakes.
!
Failure to heed the above could result in personal injury and/or damage to your scooter.
Motor/Transaxle Assembly (Not Shown)
The motor/transaxle assembly is an electromechanical unit that converts electrical energy from your scooter’s
batteries into the controlled mechanical energy that drives the scooter’s wheels.
Revo
21
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . B AT T E R I E S A N D C H A R G I N G
Your scooter is equipped with two sealed, maintenance free batteries.
! Charge the batteries prior to using your scooter for the first time.
! Keep the batteries fully charged to keep your scooter running smoothly.
READING YOUR BATTERY VOLTAGE
The battery condition meter on the tiller console uses a
color code to indicate the approximate strength of your
batteries. Fromrighttoleft, greenindicatesfullycharged
batteries, yellow a draining charge, and red indicates
that an immediate recharge is necessary. See figure 7.
To check the battery strength during charging, you must
first unplug the charger power cord and power up your
scooter by inserting the key into the key switch and turn-
ing it to the on position.
NOTE: To ensure the highest accuracy, the bat-
tery condition meter should be checked while op-
erating your scooter at full speed on a level sur-
face.
Figure 7. Battery Condition Meter
OFF-BOARD BATTERY CHARGER VOLTAGE SWITCH
The offboard charger supplied with your scooter is equipped with a 115/230 voltage switch. The voltage switch is
preset at “115V” and is intended to be used with a standard 110/115V electrical outlet. Ensure this is the case
before attempting to insert the charger plug into the electrical outlet. If the setting is incorrect, the charger will not
function properly. Slide the switch to the prescribed position. See figure 7A.
VOLTAGE SWITCH
Figure 7A. Voltage Switch
Revo
22
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . B AT T E R I E S A N D C H A R G I N G
CHARGING THE BATTERIES ON THE SCOOTER
PROHIBITED! Never use an extension cord to plug in your battery charger. Plug the charger
directly into a properly wired standard electrical outlet.
PROHIBITED! Removal of the grounding prong can create an electrical hazard. If
necessary, properly install an approved 3-pronged adapter to an electrical outlet having 2-
pronged plug access. Failure to heed could result in personal injury and/or property damage.
WARNING! Ensure that both ends of the charger power cord are clean and dry before
plugging the charger power cord into the charger power cord receptacle or the electrical
outlet.
WARNING! Prevent injury and/or equipment damage! Read the battery charging instructions
in this manual and in the manual supplied with the battery charger before charging the
batteries.
WARNING! Prevent injury and/or equipment damage! Do not expose the off-board battery
charger to rain or other sources of moisture unless it has been tested for outdoor use.
Refer to the manual supplied with the battery charger for more information.
WARNING! Prevent injury and/or equipment damage! Explosive gases may be generated
while charging the batteries. Keep the scooter and the battery charger away from sources
of ignition such as flames or sparks and provide adequate ventilation when charging the
batteries.
WARNING! Prevent injury and/or equipment damage! Inspect the battery charger, wiring,
and connectors for damage before each use. Contact your authorized Pride Provider if
damage is found.
WARNING! Prevent injury and/or equipment damage! Do not attempt to open the battery
charger case. If the battery charger does not appear to be working correctly, contact your
authorized Pride Provider.
WARNING! Prevent injury and/or equipment damage! If the off-board battery charger is
equipped with cooling slots, then do not attempt to insert objects through these slots.
WARNING! Prevent injury and/or equipment damage! Do not allow unsupervised children
to play near the scooter while the batteries are charging.
WARNING! Prevent injury and/or equipment damage! If your off-board battery charger has
not been tested and approved for outdoor use, then do not expose it to adverse or extreme
weather conditions. If the battery charger is exposed to adverse or extreme weather
conditions, then it must be allowed to adjust to the difference in environmental conditions
before use indoors. Refer to the manual supplied with the battery charger for more
information.
Revo
23
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . B AT T E R I E S A N D C H A R G I N G
Follow these easy steps to charge your batteries safely:
1. Position your scooter close to a standard electrical outlet.
2. Remove the key from the key switch.
3. Make certain that the manual freewheel lever is in the drive
(pushed back) position.
4. Remove the charger power cord receptacle cover from the
charger power cord receptacle and plug the 3-pin charger power
cord into the receptacle. See figure 8.
5. Make sure the battery charger switch is in the “off” position.
See figure 8B.
Figure 8. Charger Power Cord
Receptacle
PLUGS INTO THE CHARGER
POWER CORD RECEPTACLE
6. Extend the charger power cord and plug it into the electrical
outlet.
7. Turn the charger on. See figure 8B. It is recommended that you
charge your batteries for 8 to 14 hours.
8. When the batteries are fully charged, turn the charger off and
unplug the charger power cord from the electrical outlet and
then from the charger power cord receptacle.
9. Replace the charger power cord receptacle cover.
ON/OFF SWITCH
PLUGS INTO
ELECTRICAL
OUTLET
I
O
NOTE: There is a charger inhibit function on your scooter.
The scooter will not run and the battery condition meter will
not operate if the charger power cord is not disconnected from
the battery pack.
Figure 8A. Off-Board Charger
CHARGING THE BATTERIES OFF OF THE SCOOTER
Removing the battery packs and charging them off the scooter is
convenient should you want to leave the scooter in your vehicle.
OFF
ON
To charge the batteries off of the scooter:
1. Remove the battery packs from the scooter and place them on a
flat, dry surface in exactly the same positions as they are on the
scooter.
2. Follow steps 4-9 from above.
3. Reinstall the batteries onto the scooter See IX, “Disassembly
andAssembly” for information on how to remove and position
the battery packs.
Figure 8B. Charger On/Off Switch
Revo
24
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . B AT T E R I E S A N D C H A R G I N G
FREQUENTLY ASKED QUESTIONS
How does the charger work?
When your scooter’s battery voltage is low the charger works harder, sending more electrical current to the
batteries to bring up their charge.As the voltage approaches full charge, the charger sends less and less electrical
current to the batteries. When the batteries are fully charged, the current sent by the charger is at nearly zero
amperage. Therefore, when the charger is plugged in, it maintains the charge on your scooter’s batteries, but does
not overcharge them. We do not recommend that you charge your scooter’s batteries for more than 24 consecu-
tive hours.
What if my scooter’s batteries won’t charge?
! Ensure that both ends of the charger power cord are inserted fully.
! Ensure that both battery packs are seated into the battery wells properly.
! Ensure that the charger is turned on at the toggle switch located on the side of the off-board charger.
! Check the charger fuse located inside the right battery pack. The fuse is attached to the wire leading from
the charger power cord receptacle.
How often must I charge the batteries?
Two major factors must be considered when deciding how often to charge your scooter’s batteries:
! All day scooter use on a daily basis.
! Infrequent or sporadic scooter use.
With these considerations in mind, you can determine how often and for how long you should charge your scooter’s
batteries. We designed the charger so that it will not overcharge your scooter’s batteries. However, you may
encounter some problems if you do not charge your batteries often enough and if you do not charge them on a
regular basis. Following the guidelines below will provide safe and reliable battery operation and charging.
! Ifyouuseyourscooterdaily, chargeitsbatteriesassoonasyoufinishusingitfortheday.Yourscooterwillbeready
each morning to give you a full day of service. We recommend that you charge your scooter’s batteries for 8 to 14
hoursafterdailyuse.
! If you use your scooter once a week or less, charge its batteries at least once a week for 12 to 14 hours at a time.
! Keep your scooter’s batteries fully charged.
! Avoiddeeplydischargingyourscooter’sbatteries.
! Do not charge your scooter’s batteries for more than 24 consecutive hours.
How can I get maximum range or distance per charge?
Rarely will you have ideal driving conditions—smooth, flat, hard driving surfaces with no wind or curves. Often, you will
face hills, pavement cracks, uneven and loosely packed surfaces, curves, and wind, all of which affect the distance or
running time per battery charge. Below are a few suggestions for obtaining the maximum range per battery charge.
! Always fully charge your scooter’s batteries prior to daily use.
! If equipped with pneumatic tires, maintain 30-35 psi in each tire.
! Plan your route ahead to avoid as many hills, cracked, broken, or soft surfaces as possible.
! Limit your baggage weight to essential items.
! Try to maintain an even speed while your scooter is in motion.
! Avoid stop-and-go driving.
Revo
25
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . B AT T E R I E S A N D C H A R G I N G
What type and size of battery should I use?
We recommend deep-cycle batteries that are sealed and maintenance free. Both AGM and Gel-Cell are deep-
cycle batteries that are similar in performance. Do not use wet-cell batteries, which have removable caps.
WARNING! Corrosive chemicals are contained in batteries. Use only AGM or Gel-Cell
batteries to reduce the risk of leakage or explosive conditions.
NOTE: Sealed batteries are not serviceable. Do not remove the caps.
To change a battery in your scooter:
WARNING! Battery posts, terminals, and related accessories contain lead and lead
compounds. Wash hands after handling.
WARNING! Prevent injury and/or equipment damage! Do not mix or match new and old
batteries. If you encounter a situation where one battery needs to be replaced, then replace
both batteries. Refer to specifications table in this manual and the manual supplied with
the battery charger for recommended type and capacities.
1. Remove the seat.
2. Remove the battery packs from the scooter. Always remove the left side battery pack first. See IX. “Disassem-
blyandAssembly.”
3. Removethe7screws from the underside of the pack.
4. Arrange the pack so the handle is facing up and slowly remove the cover and situate it as shown in figure 9.
5. Disconnect the battery cables from the battery termi-
nals by removing the nut and bolt from each terminal.
6. Remove the old battery.
BATTERY PACK COVER
BATTERY TERMINAL
BATTERY CABLE
7. Place a new battery into the battery pack.
8. Connect the red battery cable to the positive (+)
battery terminal.
9. Connect the black battery cable to the negative (-)
battery terminal.
10. Replace battery pack cover.
11. Reinstall the 7 screws that hold the pack together
and tighten.
12. Reinstall the battery packs onto the scooter and close
the battery locks. Always reinstall the right side bat-
tery pack first.
13. Reinstall the seat.
BATTERY TERMINAL
BATTERY CABLE
NOTE: If you encounter a damaged or cracked
battery, immediately enclose it in a plastic bag
and call your authorized Pride Provider for in-
structions on disposal. Your authorized Pride
Figure 9. Battery Replacement
Provider will also have the necessary information on battery recycling, which is our recommended
course of action.
Revo
26
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . B AT T E R I E S A N D C H A R G I N G
Why do my new batteries seem weak?
Deep-cycle batteries employ a different chemical technology than that used in car batteries, nickel-cadmium bat-
teries (nicads), and other common battery types. Deep-cycle batteries are specifically designed to provide power,
drain down their charge, and then accept a relatively quick recharge.
We work closely with our battery manufacturer to provide batteries that best suit your scooter’s specific electrical
demands. Fresh batteries arrive daily at Pride and are shipped fully charged to our customers. During shipping, the
batteries may encounter temperature extremes that can influence their initial performance. Heat diminishes the
charge on the battery; cold slows the available power and extends the time needed to recharge the battery.
It may take a few days for the temperature of your scooter’s batteries to stabilize and adjust to their new room or
ambient temperature.
More importantly, it takes a few charging cycles (partial draining followed by full recharging) to establish the critical
chemical balance that is essential to a deep-cycle battery’s peak performance and long life.
Follow these steps to properly break in your scooter’s new batteries for maximum efficiency and service life.
1. Fully recharge any new battery prior to its initial use. This charging cycle brings the battery up to about 88% of
its peak performance level.
2. Operate your new scooter in familiar and safe areas. Drive slowly at first, and do not travel too far from your
home or familiar surroundings until you have become accustomed to your scooter’s controls and have properly
broken in your scooter’s batteries.
3. Fully recharge the batteries. They should be at over 90% of their peak performance level.
4. Operate your scooter again.
5. Fully recharge the batteries again.
6. After four or five charging cycles, the batteries are able to receive a charge of 100% of their peak performance
level and are able to last for an extended period of time.
What about public transportation?
If you intend to use public transportation with your scooter, you must contact the transportation provider in ad-
vance to determine their specific requirements.
Revo
27
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I . O P E R A T I O N
BEFORE GETTING ONTOYOUR SCOOTER
! Have you fully charged the batteries? See VI. “Batteries and Charging.”
! Is the manual freewheel lever in the drive position? Never leave the manual freewheel lever pushed forward
unless you are manually pushing your scooter.
! Is the tiller lock knob in the unlocked position and can you turn the tiller from side to side freely?
GETTING ONTOYOUR SCOOTER
WARNING! Before getting onto your scooter always check that the tiller lock is in the
unlocked position. Attempting to ride your scooter with the tiller lock in the locked position
can result in personal injury.
WARNING! Never attempt to get onto or off of your scooter without first removing the key
from the key switch. This will prevent the scooter from moving if accidental throttle
control lever contact is made.
1. Make certain that the key is removed from the key switch.
2. Stand at the side of your scooter.
3. Disengage the seat rotation lever and rotate the seat until it is facing you.
4. Make certain that the seat is locked securely in position.
5. Position yourself comfortably and securely in the seat.
6. Disengage the seat rotation lever and rotate the seat until you are facing forward.
7. Make certain that the seat is locked securely in position.
8. Make certain that your feet are safely on the floorboard.
PRE-RIDE ADJUSTMENTS AND CHECKS
! Is the seat at the proper height? See VIII. “ ComfortAdjustments.”
! Is the seat locked securely in place?
! Is the tiller at a comfortable setting and locked securely in place? SeeVIII. “ComfortAdjustments.”
! Is the key fully inserted into the key switch ?
! Does the scooter’s horn work properly?
! Is your proposed path clear of people, pets, and obstacles?
! Have you planned your route to avoid adverse terrain and as many inclines as possible?
OPERATING YOUR SCOOTER
WARNING! The following can adversely affect steering and stability while operating
your scooter:
! Holding onto or attaching a leash to walk your pet.
! Carrying passengers (including pets).
! Hanging any article from the tiller.
! Towing or being pushed by another motorized vehicle.
Such practices could cause loss of control and/or tipping, resulting in personal injury
and/or damage to your scooter.
Keep both hands on the tiller and your feet on the floorboard at all times while operating your scooter. This driving
position gives you the most control over your vehicle.
! Set the speed adjustment dial to your desired speed.
! Press your thumb against the appropriate side of the throttle control lever.
Revo
28
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I . O P E R A T I O N
! The electromechanical disc park brake automatically disengages and the scooter accelerates smoothly to the
speed you preselected with the speed adjustment dial.
! Pull on the left handgrip to steer your scooter to the left.
! Pull on the right handgrip to steer your scooter to the right.
! Move the tiller to the center position to drive straight ahead.
! To stop, slowly release the throttle control lever. The electronic brakes will automatically engage when your
scooter comes to a stop.
NOTE: Your scooter’s reverse speed is slower than that of the forward speed you preset with the speed
adjustment dial.
GETTING OFF OFYOUR SCOOTER
1. Bring your scooter to a complete stop.
2. Remove the key from the key switch.
3. Disengage the seat rotation lever and rotate the seat until you are facing toward the side of your scooter.
4. Make certain that the seat is locked securely in position.
5. Carefully and safely get out of the seat and stand to the side of your scooter.
6. You can leave the seat facing to the side to facilitate boarding your scooter next time.
POWER DOWN TIMER FEATURE
Your scooter is equipped with an energy saving automatic power down timer feature designed to preserve your
scooter’s battery life. If you mistakenly leave the key in the key switch but do not use your scooter for approxi-
mately 20 minutes, the scooter’s controller shuts down automatically. Although the controller is shut down, power
will still be supplied to the scooter’s lighting system.
If the power down timer feature takes effect, perform the following steps to resume normal operation.
1. Remove the key from the key switch.
2. Reinsert the key and power up your scooter.
Revo
29
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I I . C O M F O R T A D J U S T M E N T S
TILLER ANGLE ADJUSTMENT
TILLER ANGLE
ADJUSTMENT
KNOB
WARNING! Remove the key from the
key switch before adjusting the tiller
or the seat. Never attempt to adjust
the tiller or the seat while the scooter
is in motion.
Your scooter is equipped with a pivoting tiller that allows
adjustment to several positions from the scooter deck to
the farthest forward stop. See figure 10.
1. Turnthetillerangleadjustmentknobcounterclockwise
to loosen the tiller.
2. Move the tiller to a comfortable position.
3. Turn the tiller angle adjustment knob clockwise to
secure the tiller in position.
Figure 10. Tiller Angle Adjustment Knob
NOTE: In order to lower the tiller to the scooter
floorboard, you must first remove the seat and both
battery packs. See IX. “Disassembly andAssembly.”
SEAT ROTATION
The seat rotation lever locks the seat in one of four
positions.
ARMREST ADJUSTMENT KNOBS
1. Pull up on the seat rotation lever to unlock the seat.
See figure 11.
2. Rotate the seat to the desired position.
3. Release the seat rotation lever to lock the seat se-
curely in place.
BOLTS
ARMREST WIDTH ADJUSTMENT
The armrest width can be adjusted inward or outward.
1. Loosen the armrest adjustment knobs at the back of
the seat frame. See figure 11.
2. Slide the armrests in or out to the desired width.
3. Tighten the armrest adjustment knobs as required.
SEAT ROTATION LEVER
Figure 11. Seat Adjustments
The armrests can also pivot upward to aid in getting onto
and off of your scooter.
Revo
30
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I I . C O M F O R T A D J U S T M E N T S
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the scooter’s seat forward or rearward to one of three settings, to adjust the distance between
the seat and the tiller.
1. Remove the seat from your scooter. Refer to IX. “Disassembly andAssembly.”
2. Remove the four bolts that fasten the seat to the seat platform. See figure 11.
3. Align the seat platform with the desired set of holes on the seat.
4. Replace and tighten the four bolts securely.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to one of three different
heights. See figure 12.
1. Remove the seat from your scooter. See IX. “Disas-
sembly andAssembly.”
ADJUSTMENT
2. Use the attached ring to pull and remove the detent
HOLES
pin from the lower seat post.
3. Raise or lower the upper seat post to the desired
DETENT
PIN
seat height.
4. Whileholdingtheupperseatpostatthatheight, match
up the adjustment holes in the upper and lower seat
posts.
5. Fully insert the detent pin.
6. Replace the seat.
Figure 12. Seat Height Adjustment
Revo
31
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
You can disassemble the scooter into seven pieces: the seat, the front section, the rear section, the rear shroud, the
basket, and the batteries. See figure 13. No tools are required to disassemble or assemble your scooter, but keep
in mind that the disassembled sections of the scooter take up more floor space than the assembled unit.Always
disassemble or assemble your scooter on a level, dry surface with sufficient room for you to work and move
around your scooter-about 5 feet in all directions. Remember that some scooter components are heavy and you
may need assistance when lifting them.
REAR
FRONT
SECTION
WARNING! Lifting weight beyond your
physical capability may result in personal
injury. Ask for assistance when
necessary while disassembling or
assembling your scooter.
SECTION
SEAT
To disassemble:
1. Remove the key and ensure that the manual free-
wheel lever is in the drive position.
BATTERY PACKS
2. Lock the tiller in place by positioning it forward
then pushing the tiller lock knob inwardandturn-
ing it clockwise 90 degrees. See figure 14.
3. Remove the seat by pulling up on the seat rotation
lever, rotating the seat one-eighth of a turn, and
lifting the seat up and off of the scooter.
Figure 13. Scooter Components
4. Disengage the left battery pack lock by pulling it
outward from the scooter. See figure 15.
5. Remove the left battery pack by lifting it straight
up and away from the scooter. See figure 15.
6. Removetherightbatterypackinthesamemanner
as in the above step.
SHOWN IN
UNLOCKED
POSITION
7. Unplug the front-to-rear harness. See figure 16.
Figure 14.Tiller Lock Knob
LEFT BATTERY PACK
#
LEFT BATTERY PACK LOCK
Figure 15. Battery Pack Removal/Installation
Figure 16. Front-To-Rear Harness
NOTE: When DISASSEMBLING the scooter, always remove the LEFT battery pack first.
When ASSEMBLING the scooter, always reinstall the RIGHT battery pack first.
Revo
32
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . D I S A S S E M B L Y A N D A S S E M B L Y
Toggle Latch Release
1. Push in the toggle latch release button while pulling back the toggle latch. See figures 18 and 18A.
2. Secure the toggle latch buckle over the top of the toggle latch. See figure 18B.
3. Grab the hand grip on the tiller, loosen the tiller adjustment knob, and gently lower the tiller down to the center
of the scooter floorboard.
4. Fully tighten the tiller adjustment knob.
TOGGLE LATCH RELEASE BUTTON
TOGGLE LATCH
TOGGLE LATCH BUCKLE
Figure 18. Toggle Latch
(Latched)
Figure 18A. Toggle Latch
(Unlatched)
Figure 18B. Toggle Latch
(Secured For Disassembly)
Frame Separation
1. Push back on the seat post to pivot the scooter’s rear section rearwards until it is standing vertically on its rear
bumper. See figure 19.
2. Lift the front section up until the rear pegs are no longer in the locking brackets. See figure 20.
3. Carefully move the front section away from the rear section.
LOCKING
BRACKETS
PEGS
Figure 20. Frame Separation
Figure 19. Frame Positioning
Revo
33
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . D I S A S S E M B L Y A N D A S S E M B L Y
ASSEMBLY
1. Positionthefrontandrearsectionsofyourscooterasshowninfigure 20.
2. Align the locking brackets of the front section with the corresponding pegs on the front of the rear section.
WARNING! Position the front-to-rear harness so it will not become pinched between the
frame halves when pivoting the rear section forward.
3. Holding the seat post, slowly pivot the rear section forward until the locking brackets are fully connected onto the
rear pegs. See figures 19 and 20.
4. Raise the tiller.
5. Secure the toggle latch. See figure 18.
! Lower the toggle latch buckle.
! Push back on the toggle latch so it locks into place.
6. Connect the front-to-rear harness.
7. Reinstall the battery packs and engage both battery pack locks. Always replace the right battery pack first.
8. Replace the seat.
9. Unlock the tiller by rotating the tiller lock knob 90 degrees counterclockwise.
WARNING! Before getting onto your scooter always check that the tiller lock knob is in
the unlocked position. Attempting to ride your scooter with the tiller lock knob in the
locked position can result in personal injury.
Revo
34
Download from Www.Somanuals.com. All Manuals Search And Download.
X . B A S I C T R O U B L E S H O O T I N G
Any electromechanical device occasionally requires some troubleshooting. However, most of the problems that
may arise can usually be solved with a bit of thought and common sense. Many of these problems occur because
the batteries are not fully charged or because the batteries are worn down and can no longer hold a charge.
DIAGNOSTIC FLASH CODES
The diagnostic flash codes for your scooter are designed to help you perform basic troubleshooting quickly and
easily.Adiagnostic flash code will flash from the status LED in the event one of the conditions listed below develops.
NOTE: Your scooter will not run unless the flash code condition is resolved and the scooter has been
turned off then turned back on.
FLASH CODE
CONDITION
Battery voltage is too low to operate the
scooter.
Battery voltage is too high to operate the
scooter.
SOLUTION
Charge fully until charger and any meters
indicate completion.
Contact your authorized Pride Provider for
assistance.
! !
(2)
! ! !
(3)
! ! ! ! !
(5)
Solenoid brake trip. The manual freewheel Remove the key, then push the manual freewheel
lever may be in the freewheel position.
Throttle trip. The throttle control lever
may have been depressed while inserting
the key.
lever to the drive position, restart your scooter.
! ! ! ! ! !
Release the throttle control lever completely,
then reinsert the key.
(6)
! ! ! ! ! ! !
Throttle trip. Throttle potentiometer fault
or speed potentiometer fault.
Contact your authorized Pride Provider for
assistance.
(7)
! ! ! ! ! ! ! !
Contact your authorized Pride Provider for
assistance.
The scooter’s motor is disconnected.
Possible controller trip. You may be
(8)
Shut down your scooter for a minimum of
several minutes to allow the controller to cool.
Or, try reinserting the key into the key switch.
! ! ! ! ! ! ! ! ! attempting to install the battery pack while
(9)
the key is inserted or the motor controller
may be in overheat protective mode.
What if all the systems on my scooter seem to be “dead”?
! Make certain that the key is in the “on” position.
! Check that the batteries are fully charged.
! Push in the main circuit breaker reset button. See V. “Your Scooter.”
! Make certain that both batteries are seated properly.
! Make sure that the front-to-rear harness is firmly connected. See IX. “Disassembly andAssembly.”
! Be sure the power down timer feature hasn’t been activated. See VII. “Operation.”
What if my scooter does not move when I press the throttle control lever?
! When the manual freewheel lever is pushed forward, the brakes are disengaged and all power to the motor/
transaxle assembly is cut.
! Push back on the manual freewheel lever, turn the scooter off, and then turn the scooter on to return to normal
scooter operation.
Revo
35
Download from Www.Somanuals.com. All Manuals Search And Download.
X . B A S I C T R O U B L E S H O O T I N G
What if the main circuit breaker repeatedly trips?
! Charge the scooter’s batteries more frequently. See VI. “Batteries and Charging.”
! If the problem continues, have both of your scooter’s batteries load tested by your authorized Pride Provider.
! You may also perform the load test yourself. Battery load testers are available at most automotive parts stores.
! Follow the directions supplied with the load tester.
! See VI. “Batteries and Charging” or IV. “Specifications” for information about your scooter’s battery type.
! Contact your authorized Pride Provider.
What if the battery condition meter dips way down and the motor surges or hesitates when I press my
scooter’s throttle control lever?
! Fully charge your scooter’s batteries. See VI. “Batteries and Charging.”
! Have your authorized Pride Provider load test each battery.
! Or, see the previous troubleshooting question for load testing the batteries yourself.
If you experience any problems with your scooter that you are not able to solve, immediately contact your authorized
Pride Provider for information, maintenance, and service.
Revo
36
Download from Www.Somanuals.com. All Manuals Search And Download.
X I . C A R E A N D M A I N T E N A N C E
Your scooter requires a minimal amount of care and maintenance. If you do not feel confident in your ability to
perform the maintenance listed below, you may schedule inspection and maintenance at your authorized Pride
Provider. The following areas require periodic inspection and/or care and maintenance.
TIRE PRESSURE
! If equipped with pneumatic tires, always maintain a proper 30-35 psi tire pressure.
WARNING! It is important that 30-35 psi tire pressure be maintained in pneumatic tires at
all times. Do not underinflate or overinflate your tires. Low pressure may result in loss of
control, and overinflated tires may burst. Failure to maintain 30-35 psi tire pressure in
pneumatic tires at all times may result in tire and/or wheel failure, causing serious personal
injury and/or damage to your scooter.
! Regularly inspect your scooter’s tires for signs of wear.
WHEEL REPLACEMENT
If your scooter is equipped with pneumatic tires and you have a flat tire, you can have the tube replaced. If your
scooter is equipped with a solid tire insert, either the solid insert or the entire wheel must be replaced depending on
model. Contact your authorized Pride Provider for information regarding replacement wheels for your scooter.
WARNING! Prevent personal injury! Completely deflate pneumatic tires before dismantling
the rim or attempting repair.
WARNING! When changing a tire, remove only the center lug nut, then remove the tire. If
any further disassembly is required, deflate the tire completely or it may explode, possibly
resulting in personal injury.
EXTERIOR SURFACES
Bumpers and tires can benefit from an occasional application of a rubber or vinyl conditioner.
WARNING! Do not use a rubber or vinyl conditioner on the scooter’s vinyl seat or tire tread.
They will become dangerously slippery and result in personal injury and/or damage to
your scooter.
CLEANING AND DISINFECTION
! Use a damp cloth and mild, non-abrasive cleanser to clean the plastic and metal parts of your scooter.Avoid
using products that may scratch the surface of your scooter.
! If necessary, clean your product with an approved disinfectant. Make sure the disinfectant is safe for use on
your product before application.
WARNING! Prevent personal injury and product damage! Follow all safety instructions for
the proper use of the disinfectant before applying it to your product.
Revo
37
Download from Www.Somanuals.com. All Manuals Search And Download.
X I . C A R E A N D M A I N T E N A N C E
BATTERY TERMINAL CONNECTIONS
! Make certain that the terminal connections remain tight and uncorroded.
! The batteries must sit flat in the battery wells.
WIRING HARNESSES
! Regularly check all wiring connections.
! Regularly check all wiring insulation, including the charger power cord, for wear or damage.
! Have your authorized Pride Provider repair or replace any damaged connector, connection, or insulation that
you find before using your scooter again.
ABS PLASTIC SHROUDS
! The front tiller shroud, front shroud, and the rear shroud are formed from durableABS plastic and are coated
with an advanced formula urethane paint.
! A light application of car wax will help the shrouds retain their high gloss.
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
These items are all prelubricated, sealed, and require no subsequent lubrication.
MOTOR BRUSHES
The motor brushes are housed inside of the motor/transaxle assembly. They should be inspected periodically for
wear by your authorized Pride Provider.
CONSOLE AND REAR ELECTRONICS
! Keep these areas free of moisture.
! Allow these areas to dry thoroughly if they have been exposed to moisture before operating your scooter again.
FUSE REPLACEMENT
In the event a fuse should cease to work:
1. Remove the fuse by pulling it out of its slot.
2. Examine the fuse to be sure it is blown. See figures 21 and 21A.
3. Insert a new fuse of the proper rating.
WARNING! The replacement fuse must exactly match the rating of the new fuse. Failure
to use properly rated fuses may cause damage to the electrical system and may result in
personal injury.
Figure 21A. Blown Fuse (Replace)
Figure 21. Working Fuse
Revo
38
Download from Www.Somanuals.com. All Manuals Search And Download.
X I . C A R E A N D M A I N T E N A N C E
LIGHT BULB REPLACEMENT
The scooter’s light bulbs are easily replaceable. Do not use regular automotive-type 12-volt light bulbs; your
scooter is equipped with a 24-volt electrical system. Replacement light bulbs can be purchased from your authorized
Pride Provider.
NOTE: Use only 24-volt light bulbs.
1. Remove the light cover.
2. Gently remove the bulb by pulling it straight out.
3. Insert a new bulb of the same wattage.
4. Replace the light cover.
NYLON LOCK NUT REPLACEMENT
Any nylon insert lock nut removed during the periodic maintenance, assembly, or disassembly of the scooter must
be replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon insert,
resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores or through
your authorized Pride Provider.
STORINGYOUR SCOOTER
If you plan on not using your scooter for an extended period of time, it is best to:
! Fully charge its batteries prior to storage.
! Remove the battery packs from the scooter.
! Store your scooter in a warm, dry environment.
! Avoid storing your scooter where it will be exposed to temperature extremes.
WARNING! Always protect batteries from freezing temperatures and never charge a frozen
battery. This damages the battery and can cause personal injury.
For prolonged storage, you may wish to place several boards under the frame of your scooter to raise it off of the
ground. This takes the weight off the tires and reduces the possibility of flat spots developing on the areas of the
tires contacting the ground.
DISPOSAL OFYOUR SCOOTER
Your scooter must be disposed of according to applicable local and national statutory regulations. Contact your
local waste disposal agency or authorized Pride Provider for information on proper disposal of packaging, metal
frame components, plastic components, electronics, and batteries.
Revo
39
Download from Www.Somanuals.com. All Manuals Search And Download.
X I I . W A R R A N T Y
THREE-YEAR LIMITED WARRANTY
For three (3) years from the date of purchase, Pride will repair or replace at our option to the original purchaser,
free of charge, any of the following parts found upon examination by an authorized representative of Pride to be
defective in material and/or workmanship:
Structural Frame Components, Including:
! Main Frame
! Fork
! Seat Post
! Tiller Frame
THREE-YEAR PRORATA WARRANTY
Three-year prorata drivetrain warranty, including:
! Transaxle
! Motor Brake (electronic function ONLY) ! Brake
These components will be prorated on the following schedule:
! First year: 100% replacement of parts cost
! Second year: 67% replacement of parts cost
! Third year: 50% replacement of parts cost
NOTE: If there is an increase in the operational noise level in the transaxle, the warranty does not
apply. An increase in operational noise level usually occurs due to abusive and excessive strain on the
scooter.
ONE-YEAR LIMITED WARRANTY
For one (1) year from the date of purchase, Pride will repair or replace at our option to the original purchaser, free
of charge, any of the following parts found upon examination by an authorized representative of Pride to be
defective in material and/or workmanship:
! Bearings
! Bushings
! Rubber Components
! Plastic components except body
Also, electronic assemblies including:
! Electronic Controllers
! Harnesses
! Chargers
! Any other electrical subassembly
SIX-MONTH WARRANTY
The battery is covered by a separate six-month warranty, provided by the battery manufacturer. The batteries
are not warranted by Pride.
RECONDITIONED UNITS WARRANTY
All reconditioned units are covered by a six-month warranty from Pride effective from the date of purchase.
WARRANTY EXCLUSIONS
This warranty does not extend to those items which may require replacement due to normal wear and tear.
! ABS Plastic shrouds
! Motor brushes
! Upholstery and seating
! Brake Pads
! Tires and tubes
! Fuses/Bulbs
Revo
40
Download from Www.Somanuals.com. All Manuals Search And Download.
X I I . W A R R A N T Y
! Circumstances beyond the control of Pride
! Labor, service calls, shipping, and other charges incurred for repair of the product, unless specifically autho-
rized, INADVANCE, by Pride Mobility Products Corporation
! Repairs and/or modifications made to any part without specific consent from Pride
Exclusions also include components with damage caused by:
! Contamination
! Abuse, misuse, accident, or negligence
! Battery fluid spillage or leakage
! Commercial use, or use other than normal
! Improper operation, maintenance, or storage
NOTE: Gradual deterioration in performance because the battery has been left in a discharged state,
left in cold conditions for an extended period of time, or worn out through heavy use is not covered.
SERVICE CHECKS AND WARRANTY SERVICE
Warranty service must be performed by an authorized Pride Provider. Do not return faulty parts to Pride without
prior written authorization.All transportation costs and shipping damage incurred while submitting parts for repair
or replacement are the responsibility of the purchaser. Please contact your authorized Pride Provider for informa-
tion on the current cost associated with a service visit.
There is no other express warranty.
IMPLIED WARRANTIES
Implied warranties, including those of merchantability and fitness for a particular purpose, are limited to one (1)
year from the date of original purchase and to the extent permitted by law.Any and all implied warranties are
excluded. This is the exclusive remedy. Liabilities for consequential damages under any and all warranties are
excluded.
Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion of
limitation of incidental or consequential damages. So, the above limitation or exclusion may not apply to you.
Revo
41
Download from Www.Somanuals.com. All Manuals Search And Download.
182 SusquehannaAvenue
Exeter, PA18643
1-800-800-8586
*I NFMANU2427*
Download from Www.Somanuals.com. All Manuals Search And Download.
|
