Pride Mobility High Chair Quantum 614 User Manual

QUANTUM  
S E R I E S  
Including Models: Quantum 614, Quantum 614 3S,  
Quantum 614 3SP, and Quantum 614 3MP  
1-800-800-8586 (US) 1-888-570-1113 (Canada)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C O N T E N T S  
I.  
INTRODUCTION.................................................................................................................................... 4  
II. SAFETY.................................................................................................................................................... 5  
III. YOUR POWER CHAIR....................................................................................................................... 18  
IV. ASSEMBLY............................................................................................................................................ 22  
V. COMFORT ADJUSTMENTS........................................................................................................... 24  
VI. BATTERIES AND CHARGING ....................................................................................................... 29  
VII. CARE AND MAINTENANCE ........................................................................................................... 33  
VIII. WARRANTY........................................................................................................................................... 39  
APPENDIX I - SPECIFICATIONS .......................................................................................................... 41  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
I . I N T R O D U C T I O N  
SAFETY  
WELCOME to Quantum Rehab, a division of Pride Mobility Products Corporation (Pride). The power chair you have  
purchased combines state-of-the-art components with safety, comfort, and styling in mind. We are confident that these  
design features will provide you with the conveniences you expect during your daily activities. Once you understand how  
to safely operate and care for your power chair, it should give you years of trouble free operation and service.  
Read andfollow all instructions, warnings, and notes in this manual before attempting to operate your power chair for the  
first time.You must also read all instructions, warnings, and notes contained in any supplemental instructional booklets for  
the controller, front riggings, and/or seating system that accompanied your power chair before initial operation. Your  
safety depends upon you, as well as your provider, caretaker, or healthcare professional in using good judgement.  
If there is any information in this manual which you do not understand, or if you require additional assistance for setup  
or operation, please contact your Quantum Rehab Provider. Failure to follow the instructions in this manual and  
those located on your power chair can lead to personal injury and/or damage to the power chair, including  
voiding the warranty.  
PURCHASER’S AGREEMENT  
By accepting delivery of this product, you promise that you will not change, alter, or modify this product or remove or  
render inoperable or unsafe any guards, shields, or other safety features of this product; fail, refuse, or neglect to install any  
retrofit kits from time to time provided by Pride to enhance or preserve the safe use of this product.  
SHIPPING AND DELIVERY  
Before using your power chair, make sure your delivery is complete as some components may be individually packaged.  
If you do not receive a complete delivery, please contact your Quantum Rehab Provider immediately. Where damage has  
occurred during transport, either to the packaging or content, please contact the delivery company responsible.  
INFORMATION EXCHANGE  
We want to hear your questions, comments, and suggestions about this manual. We would also like to hear about the safety  
and reliability of your new power chair, and about the service you received from your Quantum Rehab Provider.  
Please notify us of any change of address, so we can keep you apprised of important information about safety, new  
products, and new options that can increase your ability to use and enjoy your power chair. Please feel free to contact us  
at the address below:  
USA:  
Canada:  
Pride Mobility Products Corporation  
Attn.: Customer Care Department  
182 SusquehannaAvenue  
Exeter, PA18643-2694  
1-800-424-8205  
Pride Mobility Products Company  
380 Vansickle Road Unit 350  
St. Catharines, Ontario L2R 6P7  
1-888-570-1113  
NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact us and  
we will be glad to send you a new one immediately.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
I I . S A F E T Y  
PRODUCT SAFETY SYMBOLS  
The symbols below are used on the power chair to identify warnings, mandatory actions, and prohibited actions. It is very  
important for you to read and understand them completely.  
Read and follow the information in the owner’s manual.  
Do not allow unsupervised children to play near the power chair while the batteries are  
charging.  
Maximum seating weight.  
Keep your hands away from the tires when driving. Be aware that loose fitting clothing  
can become caught in drive tires.  
Use correct tie-down points for controller harness to prevent the harness from getting  
caught in the drive tires, pinched in the seat frame, or damaged when passing through  
doorways.  
Avoid exposure to rain, snow, ice, salt, or standing water whenever possible. Maintain and  
store in a clean and dry condition.  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
I I . S A F E T Y  
Do not use a cell phone, walkie/talkie, laptop, or other radio transmitter while operating.  
Removal of grounding prong can create electrical hazard. If necessary, properly install an  
approved 3-pronged adapter to an electrical outlet having 2-pronged plug access.  
Do not connect an extension cord to the AC/DC converter or the battery charger.  
Do not lift the mobility vehicle while seated in it.  
Do not lift the mobility vehicle while seated in it.  
Wear safety goggles.  
Corrosive chemicals contained in battery.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
I I . S A F E T Y  
EMI-RFI - This product has been tested and passed at an immunity level of 20 V/m.  
Explosive conditions exist!  
Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive conditions.  
Keep tools and other metal objects away from battery terminals. Contact with tools can  
cause electrical shock.  
Battery Set Configuration:  
+ = Positive (Red) Terminal Post  
- = Negative (Black) Terminal Post  
Connect Red wires to Red Positive (+) Terminal Posts  
Connect Black wires to Black Negative () Terminal Posts  
Do not use batteries with different amp-hour (Ah) capacities. Do not mix old and new  
batteries. Always replace both batteries at the same time.  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
I I . S A F E T Y  
Battery charger for indoor use only.  
Disposal and recycling - Contact your Quantum Rehab Provider for information on proper  
disposal and recycling of your Pride product and its packaging.  
Unlocked and in freewheel mode.  
Place unit on level ground and stand to one side when changing from  
drive mode to freewheel mode or freewheel mode to drive mode.  
Locked and in drive mode.  
Do not place power chair in freewheel mode on a decline.  
Do not place power chair in freewheel mode on an incline.  
Contains Lead.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
I I . S A F E T Y  
Do not adjust suspension.  
Power chair information label  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
I I . S A F E T Y  
GENERAL GUIDELINES  
MANDATORY! Do not operate your new power chair for the first time without completely reading  
and understanding this owner’s manual.  
Your power chair is a state-of-the-art life-enhancement device designed to increase mobility. Pride provides an extensive  
variety of products to best fit the individual needs of the power chair user. Please be aware that the final selection and  
purchasing decision regarding the type of power chair to be used is the responsibility of the power chair user, who is  
capable of making such a decision, and his/her healthcare professional (i.e., medical doctor, physical therapist, etc.).  
The contents of this manual are based on the expectation that a mobility device expert has properly fitted the power chair  
to the user and has assisted the prescribing healthcare professional and/or the Quantum Rehab Provider in the instruction  
process for the use of the product.  
There are certain situations, including some medical conditions, where the power chair user will need to practice operating  
the power chair in the presence of a trained attendant.Atrained attendant can be defined as a family member or care  
professional specially trained in assisting a power chair user in various daily living activities.  
As you begin using your power chair during daily activities, you will probably encounter situations in which you will need  
some practice. Simply take your time and you will soon be in full and confident control as you maneuver through doorways,  
on and off of elevators, up and down ramps, and over moderate terrain.  
Below are some precautions, tips, and other safety considerations that will help you become accustomed to operating your  
power chair safely.  
Modifications  
Pride has designed and engineered your power chair to provide maximum mobility and utility.Awide range of accessories  
is available from your Quantum Rehab Provider to further customize your power chair to better suit your needs and/or  
preferences. However, under no circumstances should you modify, add, remove, or disable any feature, part, or function  
of your power chair.  
WARNING! Do not modify your power chair in any way not authorized by Pride. Do not use  
accessories if they have not been tested or approved for Pride products.  
Pre-Ride Safety Check  
Get to know the feel of your power chair and its capabilities. Pride recommends that you perform a safety check before  
each use to make sure your power chair operates smoothly and safely.  
Perform the following inspections prior to using your power chair:  
Check for proper tire inflation. Maintain but do not exceed the psi/bar/kPa air pressure rating indicated on each  
tire if equipped with pneumatic tires.  
Check all electrical connections. Make sure they are tight and not corroded.  
Check all controller connections to the power base. Make sure they are secured properly.  
Check the brakes. See VII. “Care and Maintenance.”  
Check battery charge. See VI. “Batteries and Charging.”  
NOTE: If you discover a problem, contact your Quantum Rehab Provider for assistance.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
I I . S A F E T Y  
Weight Limitations  
Your power chair is rated for a maximum weight capacity. Please refer to the specifications table for this limit.  
MANDATORY! Stay within the specified weight capacity of your power chair. Exceeding the weight  
capacity voids your warranty. Pride will not be held responsible for injuries and/or property damage  
resulting from failure to observe weight limitations.  
WARNING! Do not carry passengers on your power chair. Carrying passengers on your power  
chair may affect the center of gravity, resulting in a tip or a fall.  
Tire Inflation  
If your power chair is equipped with pneumatic tires, you should check or have the air pressure checked regularly. Proper  
inflation pressures will prolong the life of your tires and help ensure the smooth operation of your power chair.  
WARNING! It is important that the psi/bar/kPa air pressure rating indicated on each tire be maintained  
in pneumatic tires at all times. Do not underinflate or overinflate your tires. Low pressure may  
result in loss of control, and overinflated tires may burst. Failure to maintain the psi/bar/kPa air  
pressure rating indicated on the pneumatic tires at all times may result in tire and/or wheel failure.  
WARNING! Inflate your power chair drive tires from a regulated air source with an available pressure  
gauge. Inflating your tires from an unregulated air source could overinflate them, resulting in a  
burst tire.  
NOTE: If the tire on your power chair lists the psi rating only, use the following conversion formulas to find  
the bar or kPa rating: bar = psi x 0.06895; kPa = psi x 6.89476.  
Incline Information  
More and more buildings have ramps with specified degrees of inclination, designed for easy and safe access. Some ramps  
may have turning switchbacks (180-degree turns) that require you to have good cornering skills on your power chair.  
Proceed with extreme caution as you approach the downgrade of a ramp or other incline.  
Take wide swings with your power chair’s front wheels around any tight corners. If you do that, the power chair’s rear  
wheels will follow a wide arc, not cut the corner short, and not bump into or get hung up on any railing corners.  
When driving down a ramp, keep the power chair’s speed adjustment set to the slowest speed setting to ensure a  
safely controlled descent.  
Avoid sudden stops and starts.  
When climbing an incline, try to keep your power chair moving. If you must stop, start up again slowly and then accelerate  
cautiously. When driving down an incline, set your power chair to the slowest speed setting and drive in the forward  
direction only. If your power chair starts to move down the incline faster than you anticipated or desired, allow it to come  
to a complete stop by releasing the joystick, then push the joystick forward slightly to ensure a safely controlled descent.  
WARNING! When on any sort of an incline or decline, never place the power chair in  
freewheel mode while seated on it or standing next to it.  
WARNING! When climbing an incline, do not zigzag or drive at an angle up the face of the  
incline. Drive your power chair straight up the incline. This greatly reduces the possibility  
of a tip or a fall. Always exercise extreme caution when negotiating an incline.  
WARNING! You should not travel up or down a potentially hazardous incline (i.e., areas  
covered with snow, ice, cut grass, or wet leaves).  
WARNING! Never travel down an incline backward. Doing so may cause the power chair  
to tip. Always exercise extreme caution when negotiating an incline.  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
I I . S A F E T Y  
WARNING! If your power chair is equipped with a reclining seatback, do not attempt to negotiate  
inclines with the seat in a reclined position. Do not attempt to negotiate obstacles with the seat  
in a reclined position unless an attendant is present to help stabilize the chair. Failure to heed  
may result in the power chair tipping over.  
WARNING! Even though your power chair is capable of climbing slopes greater than those illustrated  
in figure 1, do not, under any circumstances, exceed the incline guidelines or any other  
specifications presented in this manual. Doing so could cause instability in your power chair.  
Pride recommends that the maximum slope of an incline you attempt to safely ascend or descend on your power chair does  
not exceed 6° (10.5%). See figure 1.  
WARNING! Any attempt to climb or descend a slope steeper than 6° (10.5%) may put your power  
chair in an unstable position and cause it to tip.  
6 (10.5%)  
Figure 1. Maximum Safe Slope (Ascending and Descending)  
Freewheel Mode  
Your power chair is equipped with two manual freewheel levers to allow for manual maneuverability by a trained attendant.  
For more information about how to place your power chair into and out of freewheel mode, see III. “Your Power Chair.”  
WARNING! Do not use your power chair in freewheel mode without an attendant present.  
WARNING! Do not attempt to personally place your power chair in freewheel mode while  
seated on it. Ask an attendant for assistance if necessary.  
WARNING! Do not place your power chair in freewheel mode while on an incline or decline.  
This could cause the chair to roll uncontrollably on its own.  
Braking Information  
Your power chair is equipped with two powerful brake systems:  
Regenerative — uses electricity to rapidly slow the vehicle when the joystick returns to the center/stop position.  
Disc Park Brake — activates mechanically after regenerative braking slows the vehicle to near stop, or when power is  
removed from the system for any reason.  
Cornering Information  
While your power chair is equipped with front and rear caster wheels, excessively high cornering speeds can still create  
the possibility of tipping. Factors which affect the possibility of tipping include, but are not limited to: cornering speed,  
steering angle (how sharply you are turning), uneven road surfaces, inclined road surfaces, riding from an area of low  
traction to an area of high traction (such as passing from a grassy area to a paved area – especially at high speed while  
turning), and abrupt directional changes. High cornering speeds are not recommended. If you feel that you may tip over  
in a corner, reduce your speed and steering angle (i.e., lessen the sharpness of the turn) to prevent your power chair  
from tipping.  
WARNING! When cornering sharply, reduce your speed and maintain a stable center of gravity.  
This greatly reduces the possibility of a tip or fall.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
I I . S A F E T Y  
Public Streets and Roadways  
WARNING! You should not operate your power chair on public streets and roadways. Be aware  
that it may be difficult for traffic to see you when you are seated on your power chair. Obey all  
local pedestrian traffic rules. Wait until your path is clear of traffic, and then proceed with  
extreme caution.  
Outdoor Driving Surfaces  
Your power chair is designed to provide optimum stability under normal driving conditions—dry, level surfaces composed  
of concrete, blacktop, or asphalt. However, Pride recognizes that there will be times when you will encounter other surface  
types. For this reason, your power chair is designed to perform admirably on packed soil, grass, and gravel. Feel free to  
use your power chair safely on lawns and in park areas.  
Reduce your power chair’s speed when driving on uneven terrain and/or soft surfaces.  
Avoid tall grass that can entangle the running gear.  
Avoid loosely packed gravel and sand.  
If you feel unsure about a driving surface, avoid that surface.  
Inclement Weather Precautions  
Exposure of your power chair to inclement weather conditions should be avoided whenever possible. If suddenly caught  
up in rain, snow, severe cold or heat while operating your power chair, proceed to shelter at the earliest opportunity.  
Thoroughly dry your power chair before storing, charging, or operating your power chair.  
PROHIBITED! Operating in rain, snow, salt, mist/spray conditions, and on icy/slippery surfaces  
can have an adverse affect on the electrical system. Maintain and store your power chair in a dry  
and clean condition.  
WARNING! Prolonged exposure to hot or cold conditions may affect the temperature of upholstered  
and non-upholstered items on the power chair, possibly resulting in skin irritation. Exercise caution  
when using your power chair in extremely hot or cold conditions or when exposing your power  
chair to direct sunlight for prolonged periods of time.  
Stationary Obstacles (Steps, Curbs, etc.)  
Proceed with extreme caution when driving near raised surfaces, unprotected ledges and/or drop-offs (curbs, porches,  
stairs, etc.).  
Figure 2. Correct Curb Approach  
Figure 3. Incorrect Curb Approach  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
I I . S A F E T Y  
To navigate up over a curb or stationary obstacle:  
1. Approach the curb or obstacle slowly, and make sure the power chair is traveling perpendicular to the obstacle. See  
figure 2.  
2. Increase the forward speed just before the front wheels come in contact with the obstacle.  
3. Reduce the forward speed only after the rear wheels have cleared the obstacle.  
To navigate down a curb orstationary obstacle:  
1. Approach the curb or obstacle slowly, and make sure the power chair is traveling perpendicular to the obstacle. See  
figure 2.  
2. Reduce the forward speed just before the front wheels come in contact with the obstacle.  
3. Increase the forward speed only after the rear wheels have cleared the obstacle and you are once again on a level surface.  
WARNING! Do not attempt to have your power chair climb or descend an obstacle that is higher  
than 2 in. (5 cm) unless you have the assistance of an attendant.  
WARNING! Do not attempt to have your power chair proceed backward down any step, curb, or  
other obstacle. This may cause the power chair to tip.  
Stairs and Escalators  
Power chairs are not designed to travel up or down stairs or escalators.Always use an elevator.  
WARNING! Never use your power chair to negotiate steps or escalators.  
Doors  
Determine if the door opens toward or away from you.  
Drive your power chair gently and slowly forward to push the door open. Or drive your power chair gently and slowly  
backward to pull the door open.  
Elevators  
Modern elevators have a door edge safety mechanism that, when pushed, reopens the elevator door(s).  
If you are in the doorway of an elevator when the door(s) begin to close, push on the rubber door edge or allow the  
rubber door edge to contact the power chair and the door will reopen.  
Use care that pocketbooks, packages, or power chair accessories do not become caught in elevator doors.  
Lifts/Elevation Products  
If you will be traveling with your power chair, you may find it necessary to use a lift/elevation product to aid in transporta-  
tion. Pride recommends that you closely review the instructions, specifications, and safety information set forth by the  
manufacturer of the lift/elevation product before using that product.  
WARNING! Never sit on your power chair when it is being used in connection with any type  
of lift/elevation product. Your power chair was not designed with such use in mind and any  
damage or injury incurred from such use is not the responsibility of Pride.  
Motor Vehicle Transport  
Pride recommends that you do not remain seated in your power chair while traveling in a motor vehicle. The power chair  
should be stowed in the trunk of a car or in the back of a truck or van with batteries removed and properly secured. In  
addition, any removable power chair parts, including the armrests, seat, front riggings, controller, and shrouds should be  
removed and/or properly secured during motor vehicle transport.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
I I . S A F E T Y  
WARNING! Do not sit on your power chair while it is in a moving vehicle.  
WARNING! Always be sure your power chair and its batteries are properly secured when it is being  
transported. Batteries should be secured in an upright position and protective caps should be  
installed on the battery terminals. Batteries should not be transported with any flammable or  
combustible items.  
Positioning Belts  
Your Quantum Rehab Provider, therapist(s), and other healthcare professionals are responsible for determining your re-  
quirement for a positioning belt in order to operate your power chair safely.  
WARNING! If you require a positioning belt to safely operate your power chair, make sure it is  
fastened securely in order to reduce the possibility of a fall from the power chair.  
WARNING! The positioning belt is not designed for use as a seat belt in a motor vehicle. Nor is  
your power chair suitable for use as a seat in any vehicle. Anyone traveling in a vehicle should be  
properly belted into seats approved by the vehicle manufacturer.  
Batteries  
In addition to following the warnings below, be sure to comply with all other battery handling information. For more  
information about your power chair’s batteries, seeVI. “Batteries and Charging.”  
MANDATORY! Battery posts, terminals, and related accessories contain lead and lead  
compounds. Wear goggles and gloves when handling and wash hands after handling.  
WARNING! Power chair batteries are heavy. See specifications table. If you are unable to  
lift that much weight, be sure to get help. Use proper lifting techniques and avoid lifting  
beyond your capacity.  
WARNING! Always protect the batteries from freezing and never charge a frozen battery.  
Charging a frozen battery may result in damage to the battery.  
WARNING! Connect the battery harnesses in the proper manner. RED (+) cables must be  
connected to positive (+) battery terminals/posts. BLACK (-) cables must be connected  
to negative (-) battery terminals/posts. Protective caps should be installed over all battery  
terminals. REPLACE cables immediately if damaged.  
Reaching and Bending  
Never reach, lean, or bend while driving your power chair. If it is absolutely necessary to reach, lean, or bend while seated  
on your power chair, it is important to maintain a stable center of gravity and keep the power chair from tipping. Pride  
recommends that the power chair user determine his/her personal limitations and practice bending and reaching in the  
presence of a qualified healthcare professional.  
WARNING! Do not bend, lean, or reach for objects if you have to pick them up from the  
floor by reaching down between your knees or if you have to reach over the back of the  
seat. Movements such as these may change your center of gravity and the weight  
distribution of the power chair. This may cause your power chair to tip.  
WARNING! Keep your hands away from the tires when driving. Be aware that loose fitting  
clothing can become caught in drive tires.  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
I I . S A F E T Y  
Transfers  
Transferring onto and off of your power chair requires a  
good sense of balance.Always have an attendant or health-  
care professional present while learning to properly transfer  
yourself.  
To eliminate the possibility of injury, Pride recommends that  
you or a trained attendant perform the following tasks be-  
fore attempting a transfer:  
Turn off the power to the controller.  
Ensure your power chair is not in freewheel mode. See  
III. “Your Power Chair.”  
Turn the caster wheels toward the transfer desti-  
nation to improve power chair stability during  
transfer.  
Make sure both armrests are flipped up or removed  
from your power chair.  
Flip up the foot platform or move the leg rests aside;  
this will help to keep your feet from getting caught on  
the front rigging during the transfer.  
Reduce the distance between your power chair and the  
object you are transferring onto.  
Figure 4. IdealTransfer Position  
WARNING! Before transferring, position yourself as far back as possible in the power chair seat  
to prevent the power chair from tipping forward during transfer.  
WARNING! Avoid putting all of your weight on the power chair armrests and do not use the armrests  
for weight bearing purposes, such as transfers. Such use may cause the power chair to tip, resulting  
in a fall from the power chair and personal injury.  
WARNING! Avoid putting all of your weight on the front riggings. Such use may cause the power  
chair to tip.  
Prescription Drugs/Physical Limitations  
Users must exercise care and common sense when operating a power chair. This includes awareness of safety issues when  
taking prescribed or over-the-counter drugs or when the user has specific physical limitations.  
WARNING! Consult your physician if you are taking prescribed or over-the-counter medication or  
if you have certain physical limitations. Some medications and limitations may impair your ability  
to operate your power chair in a safe manner.  
Alcohol/Smoking  
The power chair user must exercise care and common sense when operating his/her power chair.This includes awareness  
of safety issues while under the influence of alcohol or while smoking.  
WARNING! Do not operate your power chair while you are under the influence of alcohol, as this  
may impair your ability to operate your power chair in a safe manner.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
I I . S A F E T Y  
WARNING! Pride strongly recommends that you do not smoke cigarettes while seated in your  
power chair, although the power chair has passed the necessary testing requirements for cigarette  
smoking. You must adhere to the following safety guidelines if you decide to smoke cigarettes  
while seated in your power chair.  
Do not leave lit cigarettes unattended.  
Keep ashtrays a safe distance from the seat cushions.  
Always make sure cigarettes are completely extinguished before disposal.  
Removable Parts  
WARNING! Do not attempt to lift or move a power chair by any of its removable parts, including the  
armrests, seat, front riggings, controller, and shrouds.  
Preventing Unintended Movement  
WARNING! If you anticipate being seated in a stationary position for an extended period of time,  
turn off the power. This will prevent unexpected motion from inadvertent joystick contact. This  
will also eliminate the possibility of unintended chair movement from electromagnetic (EM) sources.  
Electromagnetic and Radio Frequency Interference (EMI/RFI)  
WARNING! Laboratory tests have shown that electromagnetic and radio frequency waves can  
have an adverse affect on the performance of electrically-powered mobility vehicles.  
Electromagnetic and Radio Frequency Interference can come from sources such as cellular phones, mobile two-way  
radios (such as walkie-talkies), radio stations, TV stations, amateur radio (HAM) transmitters, wireless computer links,  
microwave signals, paging transmitters, and medium-range mobile transceivers used by emergency vehicles. In some  
cases, these waves can cause unintended movement or damage to the control system. Every electrically-powered mobility  
vehicle has an immunity (or resistance) to EMI. The higher the immunity level, the greater the protection against EMI. This  
product has been tested and has passed at an immunity level of 20 V/m.  
WARNING! Be aware that cell phones, two-way radios, laptops, and other types of radio transmitters  
may cause unintended movement of your electrically-powered mobility vehicle due to EMI.  
Exercise caution when using any of these items while operating your mobility vehicle and avoid  
coming into close proximity of radio and TV stations.  
WARNING! The addition of accessories or components to the electrically-powered mobility vehicle  
can increase the susceptibility of the vehicle to EMI. Do not modify your power chair in any way  
not authorized by Pride.  
WARNING! The electrically-powered mobility vehicle itself can disturb the performance of other  
electrical devices located nearby, such as alarm systems.  
unintended motion or brake release occurs, turn your power chair off as soon as it is safe to do so. Call Pride  
at 800-424-8205 to report the incident.  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
I I I . Y O U R P O W E R C H A I R  
THE QUANTUM 614 SERIES  
Your power chair has two main assemblies: the seat assembly and the power base assembly. See figure 5. Typically, the  
seat assembly includes the armrests, seatback, and seat base. The power base assembly includes two motor/brake assem-  
blies, two drive wheels, four caster wheels, two batteries, and wiring harnesses. See figures 5, 6, and 7.  
SEATBACK  
SEAT ASSEMBLY  
ARMREST  
JOYSTICK  
CONTROLLER  
SEAT BASE  
SEATBACKRELEASELEVER  
REAR  
SHROUD  
MANUALFREEWHEEL  
LEVERS  
POWERBASE  
ASSEMBLY  
CASTERWHEEL  
DRIVEWHEEL  
FRONTRIGGING  
(FOOT PLATFORM SHOWN)  
CASTERWHEEL  
Figure 5.The Quantum 614 Series Power Chair  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
I I I . Y O U R P O W E R C H A I R  
TRAPEZE BARS  
FRONT COVER  
Figure 6.The Quantum 614 Series Power Base  
ELECTRICAL COMPONENTS  
The electrical components are located on or inside the power base. The main circuit breaker is located on the front of the  
power base. The power module is located inside the power base. See figure 7.  
Motor Connectors: This is where the controller connects to the motors.  
Battery Connector: This is where the controller connects to the batteries.  
Controller Connector: This is where the controller connects to the power module or power base. Each controller uses a  
different type of cable. Regardless of which type of controller is used, the cable must be secured to the seat assembly and  
not allowed to drag on the floor.  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
I I I . Y O U R P O W E R C H A I R  
Main Circuit Breaker:The main circuit breaker is a safety feature built into your power chair.When the batteries and the  
motors are heavily strained (e.g., from excessive loads), the main circuit breaker trips to prevent damage to the motors and  
the electronics. If the circuit trips, allow your power chair to “rest” for approximately one minute. Next, push in the circuit  
breaker button, turn on the controller, and continue normal operation. If the main circuit breaker continues to trip repeat-  
edly, contact your Quantum Rehab Provider.  
POWERMODULE  
CONTROLLER CONNECTOR  
BATTERY CONNECTOR  
MAINCIRCUITBREAKER  
MOTOR CONNECTORS  
Figure 7. Quantum 614 Series Electrical Components  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
I I I . Y O U R P O W E R C H A I R  
Manual Freewheel Levers  
Your power chair has a manual freewheel lever on each motor. Manual freewheel levers enable you to disengage the drive  
motors from the gearboxes and maneuver the chair manually.  
WARNING! Do not use the power chair while the drive motors are disengaged! Do not disengage  
the drive motors when the power chair is on an incline, as the unit could roll on its own! Only  
engage the freewheel mode when on a level surface.  
WARNING! It is important to remember that when your power chair is in freewheel mode, the  
braking system is disengaged.  
To engage or disengage the drive motors:  
1. Locate the lever on the front of each motor.  
2. Push the two levers downward to engage the drive motors (drive mode). See figure 8.  
3. Pull the two levers upward to disengage the drive motors (freewheel mode). See figure 9.  
If a lever is difficult to move in either direction, slightly rock the power chair back and forth. The lever should then move to  
the desired position.  
WARNING! Do not use the freewheel lever handles as tie-down points to secure this product.  
Figure 8. Drive Mode (Drive Engaged)  
Figure 9. Freewheel Mode (Drive Disengaged)  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
I V . A S S E M B L Y  
INITIAL ASSEMBLY  
Your power chair may require some assembly either before initial use or after transportation. It may also require disassembly  
to make some comfort adjustments. Figure 10 details those parts of the power chair that are designed to be disassembled and  
assembled by an end user or by a qualified caregiver before using the product or making comfort adjustments.  
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be  
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon  
insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores  
or through your Quantum Rehab Provider.  
ARMREST WIDTH ADJUSTMENT  
SEAT INSTALLATION  
ARMRESTANGLE  
ADJUSTMENT  
SEAT HEIGHT/ANGLE ADJUSTMENT  
CONTROLLER POSITION  
FOOT PLATFORM  
ANGLEADJUSTMENT  
FOOT PLATFORM HEIGHT/DEPTH ADJUSTMENT  
Figure 10. Quantum 614 Series AssemblyView (Standard Seating System Shown)  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
I V . A S S E M B L Y  
Seat Installation  
It may be necessary to install the seat either prior to initial  
operation or after transporting your power chair. Most seats  
are attached to the power base with the Universal Mounting  
System (UMS). The UMS consists of universal parts that  
may be attached to any medium-back or high-back seat,  
regardless of seat width or seat depth. The two main com-  
ponents are aluminum extrusions mounted to the seat base.  
These extrusions attach to a pair of trapeze bars that are  
mounted to the power base. See figure 11.  
REAR EXTRUSION  
WARNING! Do not pick up the seat frame  
by the armrests. They are free to pivot,  
and you may lose control of the seat if  
they do so.  
WIRETIE  
SETSCREW  
To install the seat:  
1. Tilt the seat back and slide the rear extrusion onto the  
rear trapeze bar. See figure 11.  
2. Lower the front extrusion onto the front trapeze bar until  
the seat locks into place.  
SEAT  
LATCH  
SAFETY  
3. Flip the seat latch safety down.  
WARNING! Make sure the seat latch  
safety is flipped down before using your  
power chair.  
TRAPEZE BARS  
4. Install the controller into one of the armrests. Tighten  
the setscrew. See figure 11.  
5. Lift the armrest straight up, then route the controller cable  
so that it cannot be pinched in the seat hinge.  
Figure 11. Universal Mounting System  
NOTE: It is important that the armrest be lifted straight up prior to securing the controller cable with wire-ties.  
6. Plug the controller connector into the power base. See figure 7.  
7. Secure the controller cable to the armrest receiver with one or more wire ties. See figure 11.  
MANDATORY! Prevent controller harness damage! Avoid routing the controller harness on the outside of  
thearmrest pad. Route the harness under the armrestortoward the inside of thearmrest pad. Use correct  
tie-down points for the controller harness to prevent the harness from getting caught in the drive tires,  
pinched in the seat frame, or damaged when passing through doorways.  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
V . C O M F O R T A D J U S T M E N T S  
COMFORT ADJUSTMENTS  
After becoming familiar with your power chair’s operation, you may find the need to make some adjustments to increase  
your comfort, such as seat height and angle, armrest angle, foot platform height and angle, and controller position.  
NOTE: If your power chair is equipped with a Synergy Seat or TRU-Balance 2 Power Positioning System,  
refer to the seat adjustment information contained in separate manuals. If your power chair is equipped with  
a contoured seating system, refer to the following information.  
WARNING! The center of gravity of your power chair was factory set to a position that meets the  
needs of the demographic majority of users. Your Quantum Rehab Provider has evaluated your power  
chair and made any necessary adjustments to suit your specific requirements. Do not change your  
seating configuration without first contacting Pride Mobility Products or your Quantum Rehab Provider.  
WARNING! Some power chair components are heavy. You may need assistance to lift or carry  
them. Please refer to “Appendix I - Specifications” for specific component weights before you  
disassemble the power chair.  
WARNING! Remove the occupant from the power chair before making any adjustments.  
Youmayneedthefollowingtomakecomfortadjustments:  
metric/standard socket set and ratchet  
adjustable wrench  
thread lock  
Seat Height and Seat Angle Adjustment  
You can change the seat height to one of four positions by  
raising the front and rear trapeze bars. If you raise or lower  
only one trapeze bar (front or rear), you can also change  
the seat base angle (dump).  
Figure 12. Seat Height Adjustment - Seat Latch Safety  
To change the seat height:  
TRAPEZE BARS  
SCREWS  
1. Turn off the power to the controller.  
2. Disconnect the controller connector(s) from the power  
base. See figure 7.  
3. Flip up the seat latch safety. See figure 12.  
4. Squeeze the seat latch and release the seat from the  
front trapeze bar.  
RETAINING  
CLIPS  
SEAT POSTS  
SEAT TOWERS  
5. Slide the seat forward and remove it from the power  
base.  
SETSCREW LOCATION  
6. Loosen the setscrews on the seat towers. See figure 13.  
7. Loosen the screws that attach the trapeze bars to the  
seat posts. See figure 13.  
8. Remove the retaining clips that secure the seat posts to  
the power base. See figure 13.  
9. Move the trapeze bars up or down to the desired height.  
NOTE: Change the seat dump by raising or lowering  
only one set of towers (front or back).  
Figure 13. Seat Adjustment -Trapeze Bars  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
V . C O M F O R T A D J U S T M E N T S  
10. Reinstall the retaining clips from step 8.  
11. Remove each screw from the trapeze bars and apply  
thread lock.  
12. Reinstall each screw into the trapeze bars and tighten.  
13. Tighten the setscrew in each seat tower. See figure 13.  
14. Reinstall the seat.  
15. Reconnect the controller to the power base.  
Seat Position Adjustment  
You can move the seat forward or rearward by changing  
the extrusion mounting position.  
To change the seat position:  
1. Unplug the controller connector(s) from the power base.  
2. Remove the seat from the power base.  
3. Remove both extrusions from the bottom of the seat.  
4. Reposition the extrusions on a different set of mounting  
holes.You must move both extrusions the same number  
of holes either forward or backwards. See figure 14.  
5. Fasten the extrusions back onto the bottom of the seat.  
6. Reinstall the seat.  
Figure 14. Seat Position Adjustment  
7. Reconnect the controller.  
Manual Recline Seatback Adjustment  
If your power chair is equipped with a reclining seat, you  
can adjust the seatback angle with the seatback release  
lever. The lever is located on the right side of the seat base.  
See figure 5.  
To adjust the recline angle:  
1. Pull up on the seatback release lever.  
2. Lean forward or backwards to the desired position.  
3. Release the lever.  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
V . C O M F O R T A D J U S T M E N T S  
Seatback AngleAdjustment  
If your power chair is equipped with an adjustable seatback,  
you can adjust it to four (4) different angles: 90°, 102°,  
105°, or 107°.  
JAMNUT  
ARMRESTANGLE  
ADJUSTINGSCREW  
To adjust the seatback angle:  
1. Remove the adjusting screws from each seat hinge. See  
figure 15.  
2. Set the seatback at the desired angle.  
3. Reinstalltheadjustingscrewstoeachseathingeandtighten.  
ARMREST HEIGHT  
ADJUSTING  
SETSCREWS  
Armrest Width Adjustment  
You can change each armrest’s width independently of  
the other.  
SEATBACKANGLE  
ADJUSTINGSCREW  
NOTE: Changing the armrest width may increase the  
overall width of your power chair.  
ARMREST KNOB  
To change the armrest width:  
1. Locate the two armrest knobs on each side of the arm-  
rest receiver bracket. See figure 15.  
2. Loosen the knobs.  
Figure 15. Seatback/Armrest Adjustment  
3. Slide the armrests in or out to the desired width.  
4. Tighten the knobs.  
Armrest AngleAdjustment  
To change the armrest angle:  
1. Lift the armrest straight up so that it is perpendicular to  
the floor. See figure 15.  
2. Loosen the jam nut.  
3. Turn the adjusting screw to raise or lower the front of  
the armrest.  
4. Tighten the jam nut to lock the adjusting screw into  
place.  
Armrest Height Adjustment  
To change the armrest height:  
1. Loosenthetwosetscrewslocatedonthearmrestreceiver.  
See figure 15.  
2. Raise or lower the armrest to the desired height.  
3. Tighten the setscrews to secure the armrest.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
V . C O M F O R T A D J U S T M E N T S  
Controller Position  
You can move the controller in toward or out away from the  
armrest, or change the position of the controller for either left-  
hand or right-hand use.  
WARNING! Do not place the controller  
cable so that it can be pinched in the seat  
frame or the power base frame.  
CONTROLLER BRACKET  
SETSCREW  
To extend the controller:  
1. Flip up the armrest so it is perpendicular to the floor.  
2. Loosenthesetscrewonthecontrollerbracket. Seefigure16.  
3. Slide the controller into or out of the armrest to the de-  
sired position.  
4. Tighten the setscrew to secure the controller.  
To change the controller position:  
1. Turn off the power to the controller.  
2. Unplug the controller connector(s) from the power base.  
3. Cut the wire tie(s) securing the controller cable to the  
armrest.  
4. Flip up the armrest and loosen the setscrew. See figure 16.  
5. Slide the controller out of the armrest.  
Figure 16. Underside of Armrest  
6. Loosen the setscrew in the other armrest.  
7. Place the controller in the other armrest.  
8. Tighten the setscrew in each armrest.  
9. Use a wire tie to secure the controller cable to the armrest.  
10. Plug the controller connector(s) into the power base.  
NOTE: If your power chair is equipped with a Synergy  
Seat or TRU-Balance 2 Power Positioning System, re-  
fer to the controller adjustment information contained  
in separate manuals.  
SECUREMENTNUT  
Foot Platform Height Adjustment  
The foot platform height is easily adjusted to several different  
heights.  
FOOT  
PLATFORM  
BRACKET  
To raise or lower the foot platform:  
1. Remove the hardware from the foot platform bracket.  
See figure 17.  
Figure 17. Foot Platform Adjustment  
2. Loosen the foot platform securement nut one-half turn.  
3. Raise or lower the foot platform to the desired height.  
4. Reinstall the hardware into the foot platform bracket and  
tighten.  
5. Tighten the securement nut.  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
V . C O M F O R T A D J U S T M E N T S  
Foot Platform Depth Adjustment  
To adjust the foot platform depth:  
1. Remove the hardware from the foot platform bracket.  
See figure 17.  
2. Move the foot platform in or out to the desired depth.  
3. Reinstall the hardware into the foot platform bracket  
and tighten.  
Foot Platform Angle Adjustment  
You can adjust the angle of the foot platform with a hex  
key. See figure 18.  
ADJUSTMENT SCREW  
To adjust the foot platform angle:  
1. Flipupthefootplatformandlocatetheadjustmentscrew.  
2. Turn the adjustment screw to raise or lower the front of  
the foot platform.  
Figure 18. Underside of Foot Platform  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
V I . B A T T E R I E S A N D C H A R G I N G  
BATTERIES AND CHARGING  
Your power chair uses two long-lasting, 12-volt, deep-cycle batteries. These batteries are sealed and maintenance free.  
Since they are sealed, there is no need to check the electrolyte (fluid) level. Deep-cycle batteries are designed to handle a  
longer and deeper discharge. Though they are similar in appearance to automotive batteries, they are not interchangeable.  
Automotive batteries are not designed to handle a long, deep discharge, and also are unsafe for use in power chairs.  
MANDATORY! Battery posts, terminals, and related accessories contain lead and lead  
compounds. Wear goggles and gloves when handling batteries and wash hands after  
handling.  
WARNING! Always use two batteries of the exact same type, chemistry, and amp-hour  
(Ah) capacity. Refer to the specifications table in this manual and in the manual supplied  
with the battery charger for recommended type and capacities.  
WARNING! Contact your Quantum Rehab Provider if you have any questions regarding  
the batteries in your power chair.  
Charging the Batteries  
The battery charger is essential in providing long life for your power chair batteries. It is designed to optimize your power  
chair’s performance by charging the batteries safely, quickly, and easily. The battery charger is only functional when the  
charger power cord is plugged into an electrical outlet.  
PROHIBITED! Removal of grounding prong can create electrical hazard. If necessary,  
properly install an approved 3-pronged adapter to an electrical outlet having 2-pronged  
plug access.  
PROHIBITED! Never use an extension cord to plug in your battery charger. Plug the  
charger directly into a properly wired standard electrical outlet.  
PROHIBITED! Do not allow unsupervised children to play near the power chair while  
the batteries are charging. Pride recommends that you do not charge the batteries  
while the power chair is occupied.  
MANDATORY! Read the battery charging instructions in this manual and in the manual  
supplied with the battery charger before charging the batteries.  
WARNING! Explosive gases may be generated while charging the batteries. Keep the  
power chair and battery charger away from sources of ignition such as flames or  
sparks and provide adequate ventilation when charging the batteries.  
WARNING! You must recharge your power chair’s batteries with the supplied off-board  
battery charger. Do not use an automotive-type battery charger.  
WARNING! Inspect the battery charger, wiring, and connectors for damage before  
each use. Contact your Quantum Rehab Provider if damage is found.  
WARNING! Do not attempt to open the battery charger case. If the battery charger  
does not appear to be working correctly, contact your Quantum Rehab Provider.  
WARNING! If the battery charger is equipped with cooling slots, then do not attempt  
to insert objects through these slots.  
WARNING! If your battery charger has not been tested and approved for outdoor use,  
then do not expose it to adverse or extreme weather conditions. If the battery charger  
is exposed to adverse or extreme weather conditions, then it must be allowed to adjust  
to the difference in environmental conditions before use indoors. Refer to the manual  
supplied with the battery charger for more information.  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
V I . B A T T E R I E S A N D C H A R G I N G  
To charge the batteries using the off-board charger:  
1. Position the front of your power chair next to a standard  
electrical outlet.  
2. Be certain the controller power is turned off.  
3. Plug the off-board charger into the off-board charger/  
programming socket on the controller. See figure 19.  
4. Plug the off-board charger into the electrical outlet.  
NOTE: If it is a Pride off-board charger, then there are  
two lights in it. The red light indicates that power to  
the off-board charger is on. The green light indicates  
that the batteries are fully charged. If it is not a Pride  
off-board charger, then follow the instructions supplied  
by the manufacturer.  
5. When the batteries are fully charged, unplug the off-board  
charger from the electrical outlet and then from the con-  
troller.  
Figure 19. Battery Charging  
Battery Break-in  
To break in new batteries for maximum efficiency:  
1. Fully recharge any new battery prior to its initial use. This brings the battery up to about 90% of its peak  
performance level.  
2. Operate your power chair throughout the house and yard. Move slowly at first, and do not travel too far until you  
become accustomed to the controls and break in the batteries.  
3. Give the batteries another full charge of 8 to 14 hours and operate your power chair again. The batteries will now  
perform at over 90% of their potential.  
4. After four or five charging cycles, the batteries will top off at 100% charge and last for an extended period.  
Frequently Asked Questions (FAQs)  
How does the charger work?  
The battery charger takes the standard electrical outlet voltage of 120VAC (alternating current) and converts it to 24VDC  
(direct current). The power chair batteries use direct current to run your power chair. When the battery voltage is low, the  
charger works harder to charge the battery. As the battery voltage approaches full charge, the charger does not work as  
hard to complete the charging cycle. When the battery is fully charged, the amperage from the charger is nearly at zero.  
This is how the charger maintains a charge but does not overcharge the battery.  
Can I use a different battery charger?  
You should use the charger supplied with the power chair. It is the safest, most efficient tool to charge the batteries.We do  
not recommend using other types of chargers (e.g., an automotive battery charger).  
NOTE: Your power chair’s charger will not operate after the batteries have been discharged to nearly zero  
voltage. If this happens, call your Quantum Rehab Provider for assistance.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
V I . B A T T E R I E S A N D C H A R G I N G  
How often must I charge the batteries?  
Many factors come into play when deciding how often to charge the batteries.You may use your power chair all day on a  
daily basis or you may not use it for weeks at a time.  
Daily Use  
If you use your power chair on a daily basis, charge the batteries as soon as you are finished using your power chair.  
Your power chair will be ready each morning to give you a full day’s service. It is recommended that you charge the  
batteries 8 to 14 hours after daily use.  
Infrequent Use  
If you use your power chair infrequently (once a week or less), you should charge the batteries at least once per week  
for 12 to 14 hours.  
NOTE: Keep your batteries fully charged and avoid deeply discharging your batteries. Do not charge the  
batteries for more than 24 hours at a charging cycle.  
How can I get maximum range or distance per charge?  
Rarely do you have an ideal driving situation such as smooth, flat, hard terrain with no wind, hills, or curves. More often  
you are presented with hills, sidewalk cracks, uneven and loosely packed surfaces, curves, and wind. All of these  
factors will affect the distance or running time per battery charge. Below are a few suggestions for obtaining the maxi-  
mum range per charge:  
Always charge the batteries fully prior to your trip.  
Plan your trip in advance to avoid inclines if possible.  
Limit baggage weight to essential items.  
Try to maintain an even speed and avoid stop-and-go driving.  
What type of batteries should I use?  
We recommend deep-cycle batteries that are sealed and maintenance free. BothAGM and Gel-Cell are deep-cycle  
batteries that are similar in performance. Refer to the specifications table for more information regarding the batteries  
used with your power chair.  
WARNING! Corrosive chemicals contained in batteries. Use only AGM or Gel-Cell  
batteries to reduce the risk of leakage or explosive conditions.  
Why do my new batteries seem weak?  
Deep-cycle batteries employ a much different chemical technology than that used in car batteries, nickel-cadmium (nicads),  
or in other common battery types. Deep-cycle batteries are specifically designed to provide power, drain down their  
charge, and then accept a relatively quick recharge.AGM and Gel-Cell batteries should be charged as often as possible.  
They do not have a “memory” like nickel-cadmium batteries.  
We work closely with our battery manufacturer to provide a battery that best suits your power chair’s specific demands.  
Fresh batteries arrive regularly at Pride and are promptly shipped with a full charge. During shipping, the batteries encoun-  
ter temperature extremes that may influence initial performance. Heat robs the charge from the battery, and cold slows the  
power available and extends the time needed to recharge the battery (just as with a car battery).  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
V I . B A T T E R I E S A N D C H A R G I N G  
It might take a few days for the temperature of the battery to stabilize and adjust to its new ambient temperature. More  
importantly, it will take a few “charging cycles” (a partial drain— then a full recharge) to establish the critical chemical  
balance that is essential to the battery’s peak performance and long life. It will be well worth it to take the time to break in  
your battery properly.  
NOTE: The useful life of a battery is quite often a reflection of the care it receives.  
How can I ensure maximum battery life?  
Afully charged deep-cycle battery will provide reliable performance and extended battery life. Keep your power chair’s  
batteries fully charged whenever possible. Batteries that are regularly and deeply discharged, infrequently charged, or  
stored without a full charge may be permanently damaged, causing unreliable power chair operation and limited battery life.  
How should I store my power chair and its batteries?  
If you do not use your power chair regularly, we recommend maintaining battery vitality by charging the batteries at least  
once per week.  
If you do not plan on using your power chair for an extended period, fully charge the batteries prior to storage. Disconnect  
the battery harnesses and store the power chair in a warm, dry environment.Avoid temperature extremes, such as freezing  
and excessively hot conditions, and never attempt to charge a frozen battery.Acold or frozen battery should be warmed  
for several days prior to recharging.  
What about public transportation?  
AGM and Gel-Cell batteries are designed for application in power chairs and other mobility vehicles. These batteries are  
FederalAviationAdministration (FAA) approved, allowing safe transportation on aircraft, buses, and trains, as there is no  
danger of spillage or leakage. We suggest you contact the carrier’s ticket counter in advance to determine that carrier’s  
specific requirements.  
What about shipping?  
If you wish to use a freight company to ship your power chair to your final destination, repack your power chair in the  
original shipping container and ship the batteries in separate boxes.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
V I I . C A R E A N D M A I N T E N A N C E  
CARE AND MAINTENANCE  
YourQuantum614isasophisticatedpowerchair.Likeanymotorizedvehicle,itrequiresroutinemaintenancechecks.Youcanperform  
someofthesechecks,butothersrequireassistancefromyourQuantumRehabProvider.Preventivemaintenanceisveryimportant.Ifyou  
followthemaintenancechecksinthissectionasscheduled,youcanhelpensurethatyourpowerchairgivesyouyearsoftrouble-free  
operation.Ifyouhaveanydoubtastoyourpowerchair’scareoroperation,contactyourQuantumRehabProvider.  
WARNING! Do not service the power chair when the seat is occupied.  
Your power chair, like most electrical equipment, is susceptible to damage from the elements.Avoid damp areas of any kind.  
WARNING! Direct or prolonged exposure to water or dampness could cause the power  
chair to malfunction electronically and mechanically. Water can cause electrical  
components to corrode and the chair's frame to rust. Power chairs should be examined  
periodically for signs of corrosion caused by water exposure, bodily fluid exposure, or  
incontinence. Damaged components should be replaced or treated immediately.  
Should your power chair come in contact with water:  
1. Dry your power chair as thoroughly as possible with a towel.  
2. Allow your power chair to sit in a warm, dry place for 12 hours to allow unseen water to evaporate.  
3. Check the joystick operation and the brakes before using your power chair again.  
4. If any inconsistencies are found, take your power chair to an Quantum Rehab Provider. Power chairs that are fre-  
quently exposed to sources of water, such as incontinence, should be inspected often for corrosion and electronic  
components may need to be replaced frequently.  
Temperature  
Some of the parts of your power chair are susceptible to extreme changes in temperature.Always keep your power  
chair between the temperatures of 18°F (-8°C) and 122°F (50°C).  
In extremely cold temperatures the batteries may freeze. The specific temperature at which they freeze depends on a  
number of factors, such as battery charge, usage, and composition of the batteries (e.g.,AGM or Gel-Cell).  
Temperatures above 122°F (50°C) may cause your power chair to operate at a reduced speed. This reduced speed  
is a safety feature built into the controller that helps prevent damage to the motor and other electrical components.  
General Guidelines  
Avoid knocking or bumping the controller, especially the joystick.  
Avoid prolonged exposure of your power chair to extreme conditions, such as heat, cold, or moisture.  
Keep the controller clean.  
Check all connectors to ensure that they are all tight and secured properly.  
Maintain but do not exceed the psi/bar/kPa air pressure rating indicated on each tire if equipped with pneumatic tires.  
WARNING! Maintain but do not exceed the psi/bar/kPa air pressure rating indicated on each tire if  
equipped with pneumatic tires. Do not underinflate or overinflate your tires. Low pressure may  
result in loss of control, and overinflated tires may burst. Overinflating tires can cause them to  
explode.  
WARNING! Do not use a high pressure hose to inflate your tires.  
Use a rubber conditioner on the tire sidewalls to help preserve them.  
WARNING! Never use a rubber conditioner on the tread area of the tires; doing so may make the  
tires slippery and cause your power chair to skid.  
All wheel bearings are prelubricated and sealed. They require no subsequent lubrication.  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
V I I . C A R E A N D M A I N T E N A N C E  
The body shroud has been sprayed with a clear sealant coating.You can apply a light coat of car wax to help it retain  
its high-gloss appearance.  
Checkallelectricalconnections. Makesuretheyaretightandarenotcorroded. Batteriesmustsitflatwithinthebatterytray,  
withthebatteryterminalsfacinginward, towardeachother. Refertothebatterywiringlabelforthecorrectwiringlayout.  
WARNING! Even though the power chair has passed the necessary testing requirements  
for ingress of liquids, you should keep electrical connections away from sources of  
dampness, including direct exposure to water or bodily fluids and incontinence. Check  
electrical components frequently for signs of corrosion and replace as necessary.  
Daily Checks  
With the controller turned off, check the joystick. Make sure it is not bent or damaged and that it returns to the neutral  
position when you release it. Check the rubber boot around the base of the joystick for damage. Visually inspect the  
boot. Do not handle or try to repair it. See your Quantum Rehab Provider if there is a problem.  
Visually inspect the controller cable. Make sure that it is not frayed, cut, or has any wires exposed. See your Quantum  
Rehab Provider if there is a problem.  
Check for flat spots on solid tires. Flat spots could adversely affect stability.  
Inspect the armrests for loose hardware, stress points, or damage. See your Quantum Rehab Provider if there is a problem.  
Weekly Checks  
Disconnect and inspect the controller from the power base. Look for corrosion. Contact your Quantum Rehab Pro-  
vider if necessary.  
Ensure that all parts of the controller system are securely fastened to your power chair. Do not overtighten any screws.  
Check for proper tire inflation. Maintain but do not exceed the psi/bar/kPa air pressure rating indicated on each tire. If  
a tire does not hold air, see an Quantum Rehab Provider for replacement of the tube.  
Calibrate the joystick if a noticeable difference in performance is detected or if the joystick does not operate properly.  
To calibrate the joystick, power off the unit, place the joystick in the neutral position, and power the unit back on. If a  
problem still exists with your joystick’s performance, contact your Quantum Rehab Provider.  
Check the brakes. This test should be carried out on a level surface with at least three feet (1 meter) of clearance  
around your power chair.  
To check the brakes:  
1. Turn on the controller and turn down the speed level of your power chair.  
2. After one second, check the battery condition meter. Make sure that it remains on.  
3. Slowly push the joystick forward until you hear the electric brakes click. Immediately release the joystick.You must be  
able to hear each electrical brake operating within a few seconds of joystick movement. Repeat this test three times,  
pushing the joystick backwards, then left, and then right.  
Monthly Checks  
Check for drive tire wear. See your Quantum Rehab Provider for repair.  
Check the caster wheels for wear. Replace them as necessary.  
Check the caster forks for damage or fluttering which indicates that they may need to be adjusted or have the bearings  
replaced. See your Quantum Rehab Provider for repair.  
Keep your power chair clean and free of foreign material, such as mud, dirt, hair, food, drink, etc.  
Yearly Checks  
Take your power chair to your Quantum Rehab Provider for yearly maintenance, especially if you use your power chair on  
a daily basis. This helps ensure that your power chair is functioning properly and helps prevent future complications.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
V I I . C A R E A N D M A I N T E N A N C E  
Storage  
Your power chair should be stored in a dry place, free from temperature extremes. When storing, disconnect the batteries  
from the power chair. SeeVI. “Batteries and Charging.”  
WARNING! If you fail to store the unit properly, the frame can rust and the electronics can be  
damaged.  
Batteries that are regularly and deeply discharged, infrequently charged, stored in extreme temperatures, or stored without  
a full charge may be permanently damaged, causing unreliable performance and limited service life. It is recommended that  
you charge the batteries periodically throughout periods of prolonged storage to ensure proper performance.  
You may wish to place several boards under the frame of your power chair to raise it off of the ground during periods of  
prolonged storage. This takes the weight off the tires and reduces the possibility of flat spots developing on the areas of the  
tires contacting the ground.  
Disposal of Your Power Chair  
Your power chair must be disposed of according to applicable local and national statutory regulations. Contact your local  
waste disposal agency or Quantum Rehab Provider for information on proper disposal of power chair packaging, metal  
frame components, plastic components, electronics, and batteries.  
Cleaning and Disinfection  
Use a damp cloth and mild, non abrasive cleanser to clean the plastic and metal parts of your power chair.Avoid using  
products that may scratch the surface of your power chair.  
If necessary, clean your product with an approved disinfectant. Make sure the disinfectant is safe for use on your  
product before application.  
WARNING! Follow all safety instructions for the proper use of the disinfectant and/or cleaning  
agent before applying it to your product. Failure to comply may result in skin irritation or premature  
deterioration of upholstery and/or power chair finishes.  
WARNING! Never hose off your power chair or place it in direct contact with water. Your power chair  
has a painted, ABS plastic body shroud that allows it to be easily wiped clean with a damp cloth.  
WARNING! Never use any chemicals to clean a vinyl seat, as they may cause the seat to become  
slippery or dry out and crack. Use soapy water and dry the seat thoroughly.  
Wheel Replacement  
If you have pneumatic tires and you have a flat tire, you can replace the tube. If your chair is equipped with a solid tire  
insert, then you must replace the entire wheel assembly. Replacement tires, tubes, and wheel assemblies are readily avail-  
able through your Quantum Rehab Provider.  
WARNING! The wheels on your power chair should only be serviced or replaced by an Quantum  
Rehab Provider or a qualified technician.  
WARNING! Be sure that the controller’s power is turned off and the power chair is not in freewheel  
mode before performing this procedure.  
WARNING! When changing a tire, remove only the center lug nut and washer, then remove the  
wheel. If any further disassembly is required, deflate the tire completely or it may explode.  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
V I I . C A R E A N D M A I N T E N A N C E  
TIRE  
AXLE KEY  
TUBE  
AXLE SLOT  
SCREWS  
REARRIMHALF  
FRONT RIM HALF  
DRIVEWHEELWASHER  
DRIVE WHEEL NUT  
Figure 20. Quantum 614 Series DriveWheel  
Figure 21. Quantum 614 Series DriveWheel Disassembled  
Follow these easy steps for a quick and safe repair for both pneumatic and solid tires:  
1. Turn off the power to the controller.  
2. Set the power chair up on blocks.  
3. If you are changing a pneumatic tire, completely deflate it before removing the wheel.  
4. Remove the drive wheel nut and washer from the axle. See figure 20.  
5. Pull the wheel off the axle.  
6. Remove the screws from the rim assembly and separate the front and rear rim. See figure 21.  
7. Remove the old tube from the pneumatic tire and replace it with a new tube or replace the entire assembly if it is  
a solid tire.  
8. Reassemble the rims and reinstall the screws.  
9. Slide the wheel back onto the axle. Make sure that the key is in the axle slot.  
10. Reinstall the drive wheel nut and washer onto the axle and tighten.  
11. Inflate pneumatic tires to the psi/bar/kPa air pressure rating indicated on each tire.  
12. Remove the power chair from the blocks.  
Battery Replacement  
Abattery wiring diagram is printed on a decal located on the front battery tray. See figure 22. See VI. “Batteries and  
Charging” for correct battery specifications.  
MANDATORY! Battery posts, terminals, and related accessories contain lead and lead  
compounds. Wear goggles and gloves when handling batteries and wash hands after  
handling.  
WARNING! The batteries in your power chair should only be serviced or replaced by an  
Quantum Rehab Provider or a qualified technician.  
WARNING! Do not replace battery when seat is occupied.  
WARNING! Do not mix old and new batteries. Always replace both batteries at the  
same time.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
V I I . C A R E A N D M A I N T E N A N C E  
REARSHROUD  
BATTERY WIRING DIAGRAM  
BATTERY  
STRAP  
PULL POINTS  
FORREAR  
SHROUD  
REMOVAL  
DISCONNECT  
RELEASE BUTTON  
REAR BATTERY  
FRONT BATTERY  
Figure 22. Battery Removal/Installation  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
V I I . C A R E A N D M A I N T E N A N C E  
To replace the batteries:  
1. Turn off the power to the controller.  
2. Make sure that the power chair is in drive mode. See III. “Your Power Chair.”  
3. Pull to remove the rear shroud. See figure 22.  
4. Push down on the disconnect release button and disconnect the rear battery harness from the power base. See figure 22.  
5. Unfasten the battery strap from around the rear battery.  
6. Slide the rear battery out.  
7. Push down on the disconnect release button and disconnect the front battery barness from the power base. See figure22.  
8. Remove the front battery.  
9. Remove the battery harness from each battery.  
10. Install a battery harness onto each new battery according to the battery wiring diagram. See figure 22. Make sure that  
you connect the red wire to the positive (+) battery terminal and the black wire to the negative (-) battery terminal for  
each battery.  
WARNING! Make sure you tighten the fasteners so that the connections are secure.  
11. Place the batteries back into the power base.  
12. Fasten the battery strap around the rear battery.  
13. Connect each battery harness to its mating plug on the power base.  
14. Reinstall the rear shroud.  
15. Charge the batteries. See VI. “Batteries and Charging.”  
When to See Your Quantum Rehab Provider for Service  
The following symptoms could indicate a serious problem with your power chair. If necessary, contact your Quantum  
Rehab Provider. When calling, have the model number, serial number, nature of the problem, and the error code if  
available.  
Motor noise  
Frayed harnesses  
Cracked or broken connectors  
Uneven wear on any of the tires  
Jerky motion  
Pulling to one side  
Bent or broken wheel assemblies  
Does not power up  
Powers up, but does not move  
Corrective Maintenance  
If the battery condition meter does not light up when you turn on the power:  
Check the harness connections. Make sure they are tight.  
Check the circuit breaker. Reset it if necessary.  
Check the battery connections.  
If the above conditions prove normal, you can load test the batteries with a battery load tester. These testers are available  
at automotive parts stores. Disconnect both batteries before load testing and follow the directions that come with the load  
tester. If either one of the batteries fails the load test, replace both of them. If your power chair still does not power up,  
contact your Quantum Rehab Provider.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
V I I I . W A R R A N T Y  
LIFETIME LIMITED WARRANTY  
For the lifetime of your power chair from the date of purchase, Pride will repair or replace at our option to the original  
purchaser, free of charge, any of the following parts found upon examination by an authorized representative of Pride to be  
defective in material and/or workmanship:  
Structural frame components, including:  
Main Frame  
Fixed-position seat post  
TWO-YEAR LIMITED WARRANTY  
For two (2) years from the date of purchase, Pride will repair or replace at our option to the original purchaser, free of  
charge, any of the following parts found upon examination by an authorized representative of Pride to be defective in  
material and/or workmanship:  
Electronic components, including:  
ChargerAssembly  
Controller  
Main frame assemblies, including:  
Anti-tip forks Caster forks  
Caster beam Metal seat framing  
Joystick  
Other components, including:  
Frontriggings  
Electrical Harness Front rigging mounting brackets  
18-MONTH LIMITED WARRANTY  
For eighteen (18) months from the date of purchase, Pride will repair or replace at our option to the original purchaser, free  
of charge, any of the following parts found upon examination by an authorized representative of Pride to be defective in  
material and/or workmanship:  
Motor/gearbox assembly Power seat actuator  
ONE-YEAR LIMITED WARRANTY  
For one (1) year from the date of purchase, Pride will repair or replace at our option to the original purchaser, free of  
charge, any of the following parts found upon examination by an authorized representative of Pride to be defective in  
material and/or workmanship:  
Accessories  
Brakes (electronic function ONLY)  
SIX-MONTH LIMITED WARRANTY  
For six (6) months from the date of purchase, Pride will repair or replace at our option to the original purchaser, free of  
charge, any of the following parts found upon examination by an authorized representative of Pride to be defective in  
material and/or workmanship:  
Bearings and bushings  
Plastic components, except body  
The battery is covered by a separate six-month warranty, provided by the battery manufacturer. The batteries are not  
warranted by Pride.  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
V I I I . W A R R A N T Y  
RECONDITIONED UNITS WARRANTY  
All reconditioned units are covered by a six-month warranty from Pride effective from the date of purchase.  
WARRANTY EXCLUSIONS  
This warranty does not extend to those items which may require replacement due to normal wear and tear.  
ABS Plastic shrouds  
Motor brushes  
Upholstery and seating  
Brake Pads  
Tires and tubes  
Fuses/Bulbs  
Circumstances beyond the control of Pride  
Labor, service calls, shipping, and other charges incurred for repair of the product, unless specifically authorized, IN  
ADVANCE, by Pride Mobility Products Corporation  
Repairs and/or modifications made to any part without specific consent from Pride  
Exclusions also include components with damage caused by:  
Contamination  
Abuse, misuse, accident, or negligence  
Battery fluid spillage or leakage  
Commercial use, or use other than normal  
Improper operation, maintenance, or storage  
NOTE: Gradual deterioration in performance because the battery has been left in a discharged state, left in  
cold conditions for an extended period of time, or worn out through heavy use is not covered.  
SERVICE CHECKS AND WARRANTY SERVICE  
Warranty service must be performed by a Quantum Rehab Provider. Do not return faulty parts to Pride without prior  
written authorization.All transportation costs and shipping damage incurred while submitting parts for repair or replacement  
are the responsibility of the purchaser.  
Failure to follow the instructions, warnings, and notes in the owner’s manual and those located on your Pride product can  
result in personal injury or product damage and will void Pride’s product warranty.  
There is no other express warranty.  
IMPLIED WARRANTIES  
Implied warranties, including those of merchantability and fitness for a particular purpose, are limited to one (1) year from  
the date of purchase and to the extent permitted by law.Any and all implied warranties are excluded. This is the exclusive  
remedy. Liabilities for consequential damages under any and all warranties are excluded.  
Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion of limitation  
incidental or consequential damages. The above limitation or exclusion may not apply to you.  
This warranty gives you specific rights, and you may also have other rights which vary from state to state.  
Please fill out and return the product registration card to Pride. This will aid Pride in providing the best possible technical  
and customer service.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
A P P E N D I X I - S P E C I F I C A T I O N S  
SPECIFICATIONS  
Suspension:  
ATXSuspension(Active-Tracwithextrastability)  
14 in. (35.56cm), pneumaticorsolidavailable  
6in. (15.24cm), solid(frontandrear)  
Up to 5 mph (8 km/h)  
DriveWheels:  
CasterWheels:  
MaximumSpeed:¹  
Range:1  
Variableupto13miles(20.92km)  
“IntelligentBrakingelectronicregenerative, discparkbrake  
Seefigure23.  
Brakes:  
GroundClearance:²  
TurningRadius:²  
OverallSize:²  
Seefigure23.  
Length:Seefigure23.  
Width:Seefigure23.  
Drivetrain:  
Twomotor, mid-wheeldrive  
Two12-volt, deep-cycleNF-22batteries  
5-amp,off-board(standard)  
Batteries:³  
BatteryCharger:  
8-ampoff-board(optional)  
WeightCapacity:  
300lbs. (136kg)  
ComponentWeights:2  
Base:121.5lbs. (55.11kg)  
Batteries: 38 lbs. (17.23 kg) each  
¹
Varies with base model, user weight, terrain type, battery amp hour rating (Ah), battery charge, battery condition, motors, controller  
type, tire type, and tire condition. This specification can be subject to a variance of (+ or -) 10%.  
²
³
Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of (+ or – ) 3%.  
AGM or Gel-Cell type required. See VI. “Batteries and Charging.”  
NOTE: The product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series EN12184 stan-  
dards. All specifications subject to change without notice.  
Quantum 614 Series  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
A P P E N D I X I - S P E C I F I C A T I O N S  
LENGTH  
40.0(101.6cm)  
35.5(90.17cm)  
WIDTH  
25.125(63.82cm)  
20.0(50.8cm)  
2.25(5.72cm)  
GROUNDCLEARANCE  
1.625(4.12cm)  
TURNING RADIUS  
Figure 23. Quantum 614 Series Dimensions and Ground Clearance  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quantum 614 Series  
Quality Control - Quantum 614 Series  
Inclusion of all Parts  
Joystick Serial Number  
Controller Serial Number  
Left Motor Serial Number  
Right Motor Serial Number  
Fit and Finish  
Performance  
Pride keeps a more detailed report on file at the factory.  
Date Inspected  
Inspector  
*INFMANU3735*  
Product Serial #  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Cassette Player AW 7590 User Manual
Philips Digital Camera SPC1005NC User Manual
Philips DVD Player DVD714 User Manual
Philips Flat Panel Television BDS424IR User Manual
Philips Mobility Aid SRU 4010 10 User Manual
Philips TV Receiver DCR 9001 22 User Manual
Poulan Snow Blower 421886 User Manual
Poulan Trimmer 545014342 User Manual
Prima Donna Designs Washer Dryer LPR 710 User Manual
Printronix Printer SL5000r MP User Manual