POWERMATIC PM1300 Dust Collector
The POWERMATIC PM1300 is
designed to bring substantial
dust-evacuating suction with
effective filtering to your shop
and to pack those capabilities
into a durable, space-saving
package that accommodates
virtually any shop size and
needs.
The POWERMATIC PM1300 is
shipped as a bare machine
without a filter element or catch
bags allowing the buyer to
“design” the system they want.
The fabric filter and catch bag set
as well as the pleated canister
filter with 5 plastic catch bags
are sold as individual kits. This
allows the purchaser to save
money by getting the
While the Powermatic DC1300 itself is identical in both pictures above, the
difference in the height of the fabric bag (left) vs. the canister style filter (right)
is apparent.
POWERMATIC PM1300 with
the filter style wanted without
paying for and then discarding an unused “standard” filter and bag set.
Filtering Efficiency
The bag filter element is 20” in diameter and 48” in length. An upright hook is included to
support the bag when the POWERMATIC PM1300 is not running. A spring steel band clamp
secures the filter bag to the collector housing. The fabric collector bag has a spring retaining ring
sewn into its upper edge that fits into a groove in the collector housing making its installation
and removal tool free. Many manufacturers use an outside band for securing the collection bag
that can be very difficult to work with,
especially when done alone.
The bag type element filters out 96% of
30 micron particles.
The canister filter is 20” in diameter and
29” long. The canister mounts directly to
the collector housing and seals with a
To help maintain the filtering efficiency a pair of hands (left) wipe
factory installed foam gasket within the
canister flange. Four finger-operated
knobs lock the canister to the collector
across the inside of the pleated canister element to knock off excess
buildup. The hands are operated by a simple turn of the exterior
handle (right). Giving the handle a single turn once per month is
adequate in most situations.
Download from Www.Somanuals.com. All Manuals Search And Download.
Our remote control also has a timer function that allows programming in a specific amount of
run time between 1 and 99 minutes. When activated, the timer function allows the
POWERMATIC PM1300 to run a specific amount of time before it shuts off automatically.
Fan System
We designed a super efficient air system for the POWERMATIC
PM1300, based on a specially designed 12”-diameter impeller and
housing. The heavy-duty impeller has been optimized to both
move large amounts of air and to maintain that volume
consistently in a wide range of usage situations.
The fan section develops 1,064 CFM (cubic feet per minute) of
The specially designed impeller
insures strong, consistent airflow to
maximize the effectiveness of the
airflow at 6” of water. Velocity, also at 6” of water is 5,374 FPM
(feet per minute). Static pressure is 11.31 inches of water.
DC1300.
To make the POWERMATIC PM1300 compatible with the widest range of machines, it comes
with a single 6”-diameter inlet port fitted with a dual 4”-port adapter. One of the 4” ports comes
with a tethered, friction fit cover that seals it when not in use.
The inlet ports are mounted directly to the blower housing, putting them low on the
POWERMATIC PM1300 and on an even plane with the dust outlets on many machines. This
alignment keeps more of the hose flat on the floor for safety and eliminates much of the lifting
loss higher inlet ports experience to enhance performance.
To further enhance overall airflow we replaced the common flex hose
connection between the fan and collector housings with a curved,
smooth-walled sheet metal chute. Both ends of the chute have flange-
type connections with gaskets that help prevent even small leaks. This
chute has a larger inside area than a hose initially, and then tapers
down slightly as it runs to the collector housing. The smooth, flowing
shape of the chutes interior surfaces move air efficiently and
contribute to the overall performance of the POWERMATIC
PM1300.
The strength and rigid mounting of the sheet metal duct adds a
considerable amount of stability to the POWERMATIC PM1300
The smooth, flowing lines of
this sheet metal chute make it
very efficient. This chute
replaces simple section of flex
hose found on most dust
collectors.
making it possible to eliminate two of the three legs normally needed
to support the collector housing. Eliminating two legs creates
substantially more unobstructed space that makes changing the
collection bag much easier.
The collector housing is specially designed to a cyclonic effect that helps separate particles from
the air to enhance filtering and venting. The swirl of air also helps distribute the dust evenly in
the catch bag.
Download from Www.Somanuals.com. All Manuals Search And Download.
Mobility
The POWERMATIC PM1300 is built on a heavy-duty base
that features full-swivel, smooth-rolling casters at each corner.
This base, along with the low center of gravity makes moving
the POWERMATIC PM1300 around the shop effortless and
safe. We also added a pair of handles to the collector housing
that make moving the POWERMATIC PM1300 easier.
Full swivel casters at each corner make
the Powermatic DC1300 easy to move
around the shop.
Download from Www.Somanuals.com. All Manuals Search And Download.
|