Polycom® KIRK®
5020-5040 User Guide
Version 6.0| September, 2010 | 14158600-HD Ed.7
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Handset Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Charger Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Battery Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Battery Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Battery Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Handset Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Status Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Display Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Navigating Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Turning Handset On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Adjusting Speaker Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Locking Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Dial from Call List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Dial from Call Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Replying to messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Turning Loadspeaker On/Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Entering Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Description of Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Call Register . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Polycom, Inc.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
MSF Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
External Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
List of Menu Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Using the Alphanumeric Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Managing an Existing Contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Incoming Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Outgoing Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Missed Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Delete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Sending Messages Using Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Reading a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Reading a Long Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Reading a Short Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Reading a Call Back Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Replying a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Silent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Auto Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Ringing Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Firmware Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Ringing Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Ringing Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Alerting Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Vibrator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Silent Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
iv
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Auto Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Auto Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Out of Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Bluetooth (only KIRK 5040) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Last Number Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Advanced... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Any Key Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Long Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Login . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Time & Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Error information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Technical Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Intrinsic safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Polycom, Inc.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
vi
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
GettingStarted
Getting Started
Read all information in this section before you use your handset.
Handset Information
Ensure that the adapter voltage is the same as the electrical outlet
Danger
voltage.The handset uses radio signals and does not guarantee a connection
in all circumstances. Do not rely on a cordless handset to make emergency
calls.
Never use your handset:
•
•
•
•
in the vicinity of electrical detonators
in shielded rooms
in areas where radio transmission is forbidden
in aircrafts
Do not place a handset near:
•
•
•
water, moisture or damp areas
heat sources, direct sunlight or unventilated areas
devices which generate strong magnetic fields such as electrical appliances,
fluorescent lamps, computers, radios, televisions or fax machines
•
areas where the handset can be covered, its ventilation impaired, liquid
spilled on the unit or objects inserted into the handset through any
openings.
•
areas with dust, vibration, shock or temperature extremes
Check for small metal objects in the handset earpiece/mouthpiece before using
the handset.
Do not store or locate flammable liquids, gases, or explosive materials in the
same compartment or vicinity as the cordless handset, its parts or accessories.
Polycom, Inc.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Charger Information
Charger Information
Two types of chargers can be used for the handset. An ordinary charger and a
USB charger. The USB charger supports a PC phone book management
program, provided for the system administrator
Table 1-1 Charger Information.
Location
Type
Part Number
USA
Ordinary charger
Ordinary charger
84642472
84642464
Countries outside the USA
USA
USB charger
USB charger
84642473
84642466
Countries outside the USA
USA
EU
Power supply
Power supply
Power supply
84642471
84642469
84642470
UK
All
USB cable
84718504
Battery Information
Read the following information before you handle the batteries:
•
•
•
Do not leave a battery where it could be subjected to extremely high
temperatures.
Do not charge battery when the ambient room temperature is above
40°C/104°F or below 5°C/41°F.
Do not replace batteries in potentially explosive environments, such as
rooms where flammable liquids or gases are present.
•
•
The battery will explode if disposed of in a fire.
Do not charge batteries unless you use the approved charger and the
proper batteries.
•
Only use the original lithium battery type 84743418 (ICP73048) in the 5020
/ 5040 Handset. Do not use these batteries with other products. These
batteries were designed specifically for use with the 5020 / 5040 Handset
and the 5020 / 5040 charger ONLY. Improper use of the batteries may result
in explosion and fire hazard. Do not do anything that would cause the
battery to short circuit.
8
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
GettingStarted
•
Do not let battery or charger come into contact with conductive metal
objects.
•
•
Do not attempt to take battery apart.
Power handset off before removing the battery.
Removing the Battery Protection Strip
1 To remove the battery, press down the back cover and slide it towards
the bottom of the handset.
2 Lift off back cover.
3 Remove the battery, and then remove the green slip from the bottom of
the battery.
Figure 1-1 Battery Protection Strip
Installing Battery
Before using the handset, it is necessary to install the battery.
1
To install battery press down back cover and slide it towards the bottom of
the handset.
Polycom, Inc.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Battery Information
2
Lift off back cover.
3
4
Insert battery with the label readable. Align the contacts of the battery with
the corresponding connectors on the battery compartment and insert in
the direction of the arrow.
Warning: Make sure that the contacts of the battery and the connectors of
the battery compartment are aligned before sliding the battery in the
direction of the arrow.
Press back cover back in locked position (when you hear a click the back
cover is in position).
Note: The product label, including the CE logo, can be found in the battery
compartment.
Charging Battery
When charging battery for the first time, it is necessary to leave handset in
charger for 14-16 hours for the battery to be fully charged.
During normal operation, it takes approximately 6 hours to charge the handset
from fully discharged to its full capacity. Turning the backlight off reduces
page 57).
10
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
GettingStarted
á Place handset in charger.
For correct charging, be sure the room temperature is between 0°C/32°F and
40°C/104°F. Do not place the handset in direct sunlight. The battery has a
built-in heat sensor which will stop charging if the battery temperature is too
high.
If the handset is turned off when placed in charger, nothing indicates the
charging. There will be no reaction on incoming calls.
If the handset is turned on when charging, the display shows the blue charging
icon
in the status bar. The charging icon is replaced by the green fully
charged icon , when the battery is fully charged (when handset is removed
from charger, the charging icon disappears). The handset will not vibrate. Auto
answer is inactive. The handset reacts normally for incoming calls.
It is necessary to recharge battery when display shows the battery low icon
or if the handset cannot be turned on.
,
Battery Capacity
The capacity of the battery depends on the use of backlight and talk time.
Battery capacity in active mode:
•
5020: up to 20 hours of talk time. 5040: up to 15 hours of talk time.
Battery capacity in standby mode:
•
•
5020: 200 hours when display backlight is turned off. 5040: 100 hours when
display backlight is turned off.
5020: 100 hours when display backlight is set at dimmed. 5040: 60 hours
when display backlight is set at dimmed.
53.
Polycom, Inc.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Battery Disposal
Battery Disposal
Warning: Lithium lon batteries must be disposed of properly. Do not
dispose of the batteries in office or household waste.
Lithium lon batteries are recyclable. You can help preserve the environment by
returning your unwanted batteries to your nearest recycling center for
recycling or proper disposal.
Contact your system administrator for more information about battery disposal
and recycling centers in your local area.
12
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
About Your 5020 / 5040 Handset
About Your 5020 / 5040 Handset
A
B
C
F
E
H
G
I
J
D
Table 1-2 Handset Elements
Headset Connector (only 5020)
A
Volume Control
Adjusts speaker volume.
B
Display
C
Shows call information, handset status icons and guides you through
option menus.
Microphone
D
Polycom, Inc.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Battery Disposal
Table 1-3 Handset Keys
Left Softkey
E
On hook
(idle)
On hook is the
term used when
handset is in
standby mode.
Enters main menu.
OR
Confirms choices in menu.
OR
Turns handset off with a long (three second) key press.
Off hook
Mutes microphone
(active)
Off hook is the
term used when
handset is in
active mode.
Right Softkey
F
On hook
(idle)
Returns to previous menu.
Turns loadspeaker on.
Off hook
(active)
Redirect
G
On hook
(idle)
Exits menu.
Off hook
(active)
Redirects calls.
On/Off Hook
Four-Way Navigation Key
H
I
On hook
(idle)
Navigates menu.
OR
Adjusts volumes in menu.
OR
Moves cursor.
OR
Shortcuts to phone book, call register and missed call.
14
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
About Your 5020 / 5040 Handset
Table 1-3 Handset Keys
Off hook
(active)
Shortcuts to phone book.
Keypad Lock/Unlock
J
On hook
(idle)
Locks/unlocks keypad (Menu + *).
Handset Display
Status Bar
Display Center
Softkey Text
The display is divided in three parts: Status bar, Display center and Softkey
Text (see figure above).
The types of information shown in Status bar when:
•
on hook (idle) - display shows user ID, personal settings and time. If
bluetooth activated (only 5040), the bluetooth icon is visible. If wireless
headset connected (only 5040) the headset icon is visible.
•
off hook - display shows user ID.
The types of information shown in Display center when:
•
on hook (idle) - display shows standby logo or call information when
receiving an incoming call
•
off hook - display shows a telephone icon. If a wireless headset is connected
to the handset (only 5040), the display shows a telephone icon if the audio
is in the handset, and it shows a headset icon if the audio is in the headset.
The types of information shown in Softkey text when:
on hook (idle) - display shows Menu and Shortcut
•
Polycom, Inc.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Handset Display
Menu: Menu gives access to the different functions of the handset. For
more information about the content of the menu, refer to “Using the
Menu” on page 30. For information about how to navigate the menu,
Shortcut: Personal shortcuts consist of functions you have chosen to add to
•
off hook - display shows various terms according to the context of the
specific function.
Status Icons
The following icons may appear in Status bar or Display center
Table 1-4 Handset Icons
The low signal icon indicates that the handset
soon will be out of coverage.
The no signal icon indicates that handset is out
of coverage, or that the system is busy (no
speech channels available).
The low battery icon indicates that battery
capacity is low.
The telephone icon will appear when you miss
a call.
The telephone icon will appear when an
external incoming call arrives.
The telephone icon will appear when an
internal incoming call arrives
16
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
About Your 5020 / 5040 Handset
Table 1-4 Handset Icons
The telephone icon will appear when you
make a call.
The telephone icon will appear when the
handset is off hook or a call is connected.
The envelope icon will appear when you
receive a message
The charging icon will appear when the
handset is placed in charger.
The fully charged icon will appear when the
battery is fully charged.
The key lock icon indicates that the entire
keypad is locked.
The silent icon will appear when all sounds
are disabled.
The loadspeaker icon will appear when
loadspeaker is turned on
The mute icon will appear when mic mute is
turned on. Mic mute is a abbreviation of
microphone mute.
Polycom, Inc.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Navigating Handset
Table 1-4 Handset Icons
The bluetooth icon will appear when
bluetooth is activated. However, when
wireless headset is connected, the bluetooth
icon disappears
The headset icon will appear when the
wireless headset is connected.
Display Backlight
The display backlight automatically turns on when an incoming call or message
arrives, or if a key is pressed.
The backlight turns off when the handset is idle after a preset period of time
delay.
You can disable the backlight to save power, refer to “Turning Backlight Off”
on page 57 for more information.
Navigating Handset
The main part of the functions of the handset are grouped into different menus.
In the following sections you will find a description of how to navigate these
menus. For more information about the content of the different menus, refer to
You navigate the handset using two softkeys and a four-way navigation key.
The figure below illustrates the connection between these keys and the text
shown in display.
18
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
About Your 5020 / 5040 Handset
Left Softkey
Pressing left softkey
Right Softkey
Pressing right softkey
activates left softkey text.
activates right softkey text.
Use left softkey to enter main
menu. When in menu, use
the key to confirm your
choices.
Use right softkey to enter list
of personal shortcuts. When
in menu, use the key to
return to previous menu.
Four-Way Navigation Key
Use the key to move around in menus.
The four lines on the key illustrate the
directions you move when pressing
the key.
The handset also offers both personal and predefined shortcuts to selected
functions in the menu. In the end of this chapter, you will find a section
describing how to use these shortcuts.
Entering Main Menu
á To enter main menu press left softkey to activate Menu.
Scrolling in Menus
á When in menu, press top or bottom of navigation key to scroll up and down
in menu.
Confirming Choices
á When in the relevant menu, press left softkey to confirm your choices.
Various terms are being used in the softkey text according to the context
of the specific function.
Navigating Cursor
á When in the relevant menu, press left or right side of navigation key to
move cursor from side to side.
Polycom, Inc.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Navigating Handset
This is especially relevant when you are writing/editing words or
entering/editing numbers and want to delete a letter or digit.
á To delete, simply place cursor behind letter or digit and press right softkey
to activate Delete.
Adjusting Volumes
á When in the relevant menu, press left or right side of navigation key to
adjust ringing and alerting volumes.
á Press left side to turn volume down, or press right side to turn volume up.
Returning to Previous Menu
á When in menu, press right softkey to activate Back or Exit. You now return
to previous menu.
Leaving Menus
á To leave menu, press the R key. This key will exit menu at once.
Shortcuts
The handset contains two types of shortcuts:
•
Personal shortcuts
Personal shortcuts consist of functions you have chosen to add to a list of
shortcuts. The list is assigned to the right softkey.
•
Predefined shortcuts
Predefined shortcuts are unchangeable and assigned to different keys on
the handset.
Personal Shortcuts
By adding specific functions to the list of shortcuts, you get quick access to
functions you often use.
Note: Personal shortcuts can only be used when handset is in standby
mode (on hook).
In the following you will find a description of how to add, use and remove
personal shortcuts.
To add a shortcut:
1
2
3
While on hook, press Shortcut to enter the shortcut function.
Scroll to Edit shortcuts and press Select.
Scroll to the function, you want to make a shortcut to.
20
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
About Your 5020 / 5040 Handset
4
Press Select to add the function to the list of personal shortcuts.
To use a shortcut:
1
2
While on hook, press Shortcut to enter the shortcut function.
Scroll to the desired shortcut and press Select.
To remove a shortcut:
1
2
3
While on hook, press Shortcut to enter the shortcut function.
Scroll to Edit shortcuts and press Select.
Scroll to the desired shortcut and press Select to remove the function from
the list of shortcuts.
Predefined Shortcuts
Predefined shortcuts are unchangeable and assigned to different keys.
In the following you will find a list of predefined shortcuts and a description of
how to access and use them.
Call list (system dependent feature): While on hook, press left side of
navigation key to enter call list.
Incoming calls are illustrated with green arrows
Outgoing calls are illustrated with blue arrows
Missed calls are illustrated with red arrows
Exit menu: When in menu, press R.
Find name: While on or off hook, press top or bottom of navigation key.
Press bottom of navigation key to start at the top of name list with the
letter a.
Press top of navigation key to start at the bottom of name list with the
letter z.
Keypad locked/unlocked: While on hook, press Menu followed by ꢀ(Display
shows the key lock icon
followed by the text Keypad locked/unlocked).
Missed calls: While on hook, press right side of navigation key to enter a list of
missed call.
Redirect a call: While on a call, press R. The feature is system dependent.
Save name and number: While on hook, enter number and press Save.
Silent on/off: While on hook, press Menu followed by #. (Display shows the
silent icon
followed by the text Sient mode on/of, and a small icon is placed
in status line).
Speed dial: While on hook, press digit equivalent to number of the contact in
the speed dial list continuously until call is started.
Polycom, Inc.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Turning Handset On/Off
Basic Handset Options
Turning Handset On/Off
To turn handset on:
á Press left softkey to turn on handset.
To turn handset off:
1
2
Press left softkey until the question ‘Turn off?’ appears in display.
Press Yes to confirm.
Note: When you turn handset off, all content of call register and settings of
time and date are deleted if the subscribed system does not resend the
information to the handset.
Adjusting Speaker Volume
Adjusting speaker volume can only be done when handset is off hook. The
handset will remember the speaker volume until you make a new adjustment.
During a telephone conversion you can adjust the speaker volume at any time
in relation to the noise level of the surrounding environment.
Use key placed at the upper right side of handset for volume control.
To turn speaking volume up:
á While off hook, press top of key to turn up volume.
To turn speaker volume down:
á While off hook, press bottom of key to turn down volume.
Locking Keypad
Lock keypad to prevent keys from being accidentally pressed.
22
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Basic Handset Options
To lock/unlock keypad:
á Press Menu followed by ꢀ to lock keypad.
á Press Unlock followed by ꢀto unlock keypad.
To answer a call when keypad is locked, press
keypad automatically locks.
. When you end the call, the
Polycom, Inc.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Locking Keypad
Making Calls
The handset must be subscribed and registered to make a call. For more
For internal calls, dial extension number. Contact your system administrator
for a list of these extension numbers.
For external calls, dial external code (or line pool code) to access an external
line, then dial external number. Contact your system administrator to confirm
what external code or line pool code to use.
Off Hook Dialling (Dial Directly)
1
2
3
Press
Dial number.
Press to terminate the call.
to make a call.
On Hook Dialling (Pre-Dial)
1
2
3
Dial number.
Press
Press
to make a call.
to terminate the call.
Dial from Phone Book
The handset’s phone book is familiar to an ordinary phone book. However, the
find name function makes it easy to find a contact as you can jump directly to
the desired contact using the quick search as described below.
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Phone Book and press Select.
Scroll to Find name and press Select.
To find a name you can:
Scroll until you reach the desired name. To scroll through the names
quickly press the navigation key continuously.
6
Use quick search by pressing the first letter(s) (max. 5 letters) of the desired
7
8
Press
.
If more than one number: scroll to the desired number and press
.
24
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
MakingCalls
9
The display icon
appears until call is connected.
10 Press
again to terminate the call.
Note: For more information about using your phone book, refer to
Dial from Call List
Call list shows up to 40 of your latest incoming, outgoing and missed calls
(system dependent feature). When memory of call list is full, the handset will
automatically erase the oldest call when a new call is received in call list.
•
•
•
Incoming calls are illustrated with green arrows
Outgoing calls are illustrated with blue arrows
Missed calls are illustrated with red arrows
To dial from call list:
1
2
While on hook, press left side of navigation key to enter call list.
Scroll to the desired name or number and press
.
Note: When you turn off the handset, all content of call list is deleted if the
subscribed system does not resend the information to the handset.
Dial from Call Register
The call register menu stores up to 40 of your incoming, outgoing and missed
calls. The calls are classified in three groups: incoming calls, outgoing calls and
missed calls.
If memory of call register is full, the handset will automatically erase the oldest
call when a new call is received in call register. If you want to delete calls from
To dial from call register:
1
2
3
4
Press Menu to enter main menu.
Scroll to Call register and press Select.
Scroll to the desired list and press Select.
Scroll to the desired name or number and press
.
Note: When you turn off the handset, all content of call register is deleted if
the subscribed system does not resend the information to the handset.
Polycom, Inc.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Dial from Call Register
Redial
1
2
3
4
Press Menu to enter main menu.
Scroll to Call register and press Select.
Scroll to Outgoing calls and press Select.
Scroll to the desired name or number and press
.
Speed Dial
If you have assigned a number to one of the speed-dialing keys 0-9, do the
following:
á While on hook, press digit equivalent to number of the contact in the speed
dial list continuously until call is started.
Note: For more information about adding number to speed dial, refer to
26
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
AnsweringCalls
Answering Calls
The handset must be subscribed and registered to answer a call. For more
When handset rings, display shows the icon for incoming calls
and the caller
information appears below if supported by the subscribed system.
•
Press
to answer a call when your handset rings.
.
Note: You can distinguish between an internal and external call by the ring
tone. The ring tone of an internal call is followed by three short beeps
(system dependent feature).
Auto Answer
When auto answer is turned on, the handset automatically goes off hook when
an incoming call arrives.
If subscribed to a wireless solution, the handset automatically goes on hook
when calls are terminated.
1
2
3
4
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Auto answer and press Select.
Scroll to On or Off and press Change.
Note: When charging, auto answer is inactive.
Mute a Call
á Press Silence and the ring signal is muted.
Reject a Call
Note: Rejecting a call is system dependent. If supported by the subscribed
system, do the following:
á Press Reject to refuse the call. The rejected call is registered as a missed call.
Redirect a Call
Note: Redirecting a call is system dependent. If supported by the
subscribed system, do the following:
1
While on a call, press R.
Polycom, Inc.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Dial from Call Register
2
3
Dial number of the person you want to redirect the call to and press Ok. If
you want to withdraw the call, press R.
Press
to terminate the call.
Replying to messages
This allows you to read messages from another DN (Directory Number) in the
system or to listen to voice-mail messages.
The red LED on your handset flashes when you receive a message from an
internal voice message center or another telephone on your system. This is the
message waiting indication.
To view, reply and listen to your messages
1
While on hook, press R (MAIL) (short key press) to access your message
list.
2
Press NEXT to view all messages in the list. Note that The NEXT softkey
only appears on the display when you have more than one message.
3
4
Press CALL to reply to a message in the list.
Press ERASE to delete a message from the list.
Note: Refer to the document provided with the internal voice message
center for more information about mailbox options.
28
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
DuringCalls
During Calls
When you are on a call, you have three options as described in the following.
Two of the options concern whether you want to make parts of a call public or
personal. It is possible to turn both of these options on at the same time. The last
and third option is to enter and use the phone book, while you are on a call.
Turning Loadspeaker On/Off
Turning loadspeaker on allows other people in the room to listen to and
participate in the conversation. You may set the handset on a desk or table and
leave your hands free.
To turn loadspeaker on/off:
1
2
While on a call, press Loud on to turn loudspeaker on.
To turn loudspeaker off, press Loud off.
Turning Microphone Mute On/Off
Turning microphone mute on will mute your voice. That is you can hear the
other party but they cannot hear you.
1
2
While on a call, press Mic Mute to turn microphone mute on.
To turn microphone mute off, press Mic on.
Entering Phone Book
While on a call, you can access the find name function to scroll through names
and numbers using predefined shortcuts (up/down navigation keys). For more
information about entering phone book, refer to “Predefined Shortcuts” on
Polycom, Inc.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Description of Menus
Using the Menu
The handset offers a range of functions that are grouped into menus. The main
menu consists of seven menus: Phone Book, Call Register, Messages, MSF
Function, External Services, Status and Settings.
For more information about accessing and navigating the menu, refer to
Note: If handset is in menu mode, and an incoming call arrives, then menu
will be dropped and the call handled as usual. When call is terminated, the
handset returns to menu mode.
Description of Menus
In the following you will find a short description of the seven menus. For more
information about a specific menu, see reference in the end of each description
of the functions of each menu.
Phone Book
Call Register
You can store numbers and names in your phone book.
The phone book can store up to 250 names with up to four numbers each. A
maximum of 24 digits, including spaces, is allowed for each number. Names are
sorted alphabetically starting with their first character.
33.
The call register keeps track of all your recent calls as it stores up to 40 of your
incoming, outgoing and missed calls.
Messages
If supported by the subscribed system, you can send and receive messages from
the messages menu.
30
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Using the Menu
All messages is automatically stored in inbox or outbox. Messages can store up
to 20 messages. A maximum of 72 letters, including spaces, is allowed for each
message.
For more information about reading, writing and sending messages, refer to
MSF Function
MSF Function is a special function based on MSF (Message Service Function).
The function requires special software in the main system.
External Services
External Services are features placed in the main system, and only available if
the handset is subscribed to a KIRK solution. External Services include: “View
Clip Stack”, “Delete Clip Stack” and “Local Phone Book”. The Local Phone
Book is a common phone book for all handsets subscribed to the actual system,
and all handsets subscribed to the system are listed in the phone book.
Additional numbers can be added to the phone book by the system
administrator.
Status
Status provides a quick overview of some of the handset settings and works as
a shortcut, which makes it easy to change the basic settings according to your
Settings
Settings offer you the opportunity to customize the handset according to your
needs. The settings can be changed at any time.
For more information about customizing the handset, refer to “Settings” on
List of Menu Functions
In the following you will find a list of the different menu functions. The list
gives a quick overview where to find the desired function of the handset.
Phone Book
1 Find name
2 Add name/number
3 Speed dial
4 Delete
Polycom, Inc.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Description of Menus
Call Register
1 Incoming calls
2 Outgoing calls
3 Missed calls
4 Delete
Messages
1 New message
2 Inbox
3 Outbox
4 Erase messages
5 Templates
MSF Function
1 Number:
Status
1 Silent
2 Headset
3 Auto answer
4 Battery
5 Ringing tone
6 Volume
7 Firmware version
Settings
1 Ringing volume
2 Ringing tone
3 Alerting volume
4 Vibrator
5 Silent mode
6 Auto key lock
7 Backlight
8 Auto answer
9 Out of range
10 Bluetooth
11 Advanced...
32
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
PhoneBook
Phone Book
You can store numbers and names in your phone book.
The phone book can store up to 250 names with four numbers each. A
maximum of 24 digits, including spaces, is allowed for each number. Names are
sorted alphabetically starting with their first character.
If the display shows Memory full, it is necessary to delete one or more names
Using the Alphanumeric Keyboard
The normal dialling keys (0-9) are used for writing the name to be placed in the
phone book. By pressing the keys a certain number of times the related letters
will appear in the display.
Spaces are made by using the 0-key.
Key ꢀ changes between uppercase and lowercase letters, which is indicated
on the top left-hand corner of the display.
Pressing left or right side of navigation key will move the cursor.
To delete letters, place cursor behind letter and press Delete.
Managing an Existing Contact
The phone book menu offers a range of possibilities to manage existing contacts
and makes it easy to add, edit or delete name and number.
Note: It is possible to add up to four numbers to a contact.
Finding Contact in Phone Book
The handset’s phone book is familiar to an ordinary phone book. However, the
find name function makes it easy to find a contact as you can jump directly to
the desired contact using the quick search as described below.
1
2
3
4
Press Menu to enter main menu.
Scroll to Phone Book and press Select.
Scroll to Find name and press Select.
To find a name you can:
Polycom, Inc.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Managing an Existing Contact
— Scroll until you reach the desired name. To scroll through the names
quickly press the navigation key continuously.
— Use quick search by pressing the first letter(s) (max. 5 letters) of the
desired name (refer to “Using the Alphanumeric Keyboard” on page
33).
5
It is also possible to reach phone book without entering menu using a
Dialing Contact from Phone Book
Editing Name/Number
You can edit name and number of a contact in phone book at any time.
1
2
3
4
Press Menu to enter main menu.
Scroll to Phone Book and press Select.
Scroll to Find name and press Select.
To find a name you can:
— Scroll until you reach the desired name. To scroll through the names
quickly press the navigation key continuously.
— Use quick search by pressing the first letter(s) (max. 5 letters) of the
desired name (refer to “Using the Alphanumeric Keyboard” on page
33).
5
6
7
8
Press Details.
If more than one number: scroll to the desired number and press Select.
Scroll to Edit name/number and press Select.
9
Scroll to Number and edit number using the digits 0-9.
10 Press Save to store your changes.
Adding New Number
You can add a new number to a contact in phone book at any time. It is possible
to add up to four numbers to each contact.
1
2
3
4
Press Menu to enter main menu.
Scroll to Phone Book and press Select.
Scroll to Find name and press Select.
To find a name you can:
34
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
PhoneBook
— Scroll until you reach the desired name. To scroll through the names
quickly press the navigation key continuously.
— Use quick search by pressing the first letter(s) (max. 5 letters) of the
desired name (refer to “Using the Alphanumeric Keyboard” on page
33).
5
6
7
8
9
Press Details.
If more than one number, press Select.
Scroll to Add new number and press Select.
Enter the new number using the digits 0-9 and press Save.
Repeat step 7-8 to add another number to the contact.
Adding to Speed Dial
You can assign a number to one of the speed-dialing keys 0-9. This way you
only need to press a single digit to find name and number of the contact, you
want to phone.
Note: A maximum of 10 speed dial numbers is allowed.
For more information about making a call using speed dial, refer to “Speed
1
2
3
4
Press Menu to enter main menu.
Scroll to Phone Book and press Select.
Scroll to Find name and press Select.
To find a name you can:
— Scroll until you reach the desired name. To scroll through the names
quickly press the navigation key continuously.
— Use quick search by pressing the first letter(s) (max. 5 letters) of the
desired name (refer to “Using the Alphanumeric Keyboard” on page
33).
5
6
7
8
9
Press Details.
If more than one number: scroll to the desired number and press Select.
Scroll to Add to speed dial and press Select.
Scroll to the desired position and press Add name.
If position is occupied, press Yes to replace existing speed dial.
Deleting Number
You can delete a single number at any time and still keep the rest of the
belonging numbers of a contact. If you want to delete a contact and all
1
2
Press Menu to enter main menu.
Scroll to Phone Book and press Select.
Polycom, Inc.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Managing an Existing Contact
3
4
Scroll to Find name and press Select.
To find a name you can:
— Scroll until you reach the desired name. To scroll through the names
quickly press the navigation key continuously.
— Use quick search by pressing the first letter(s) (max. 5 letters) of the
desired name (refer to “Using the Alphanumeric Keyboard” on page
33).
5
6
7
8
Press Details.
If more than one number: scroll to the desired number and press Select.
Scroll to Delete number and press Select.
Press Ok to confirm.
Deleting Speed Dial
Use this function to delete a speed dial number, or replace it with a new speed
dial when necessary. For more information about replacing a speed dial, refer
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Phone Book and press Select.
Scroll to Delete and press Select.
Scroll to Speed dial number and press Select.
Scroll to the desired speed dial number and press Delete.
Deleting Contact
Use the delete name and number function if you want to delete a contact and
all the belonging numbers. If you only want to delete a single number and keep
1
2
3
4
Press Menu to enter main menu.
Scroll to Phone Book and press Select.
Scroll to Find name and press Select.
To find a name you can:
— Scroll until you reach the desired name. To scroll through the names
quickly press the navigation key continuously.
— Use quick search by pressing the first letter(s) (max. 5 letters) of the
desired name (refer to “Using the Alphanumeric Keyboard” on page
33).
5
6
7
Press Details.
If more than one number, press Select.
Scroll to Delete name/number and press Select.
36
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
PhoneBook
8
Press OK to confirm.
Adding New Contact
Use the add name/number function when you want to add a new contact to
phone book.
Note: It is possible to add up to four numbers to a contact.
1
2
3
4
Press Menu to enter main menu.
Scroll to Phone Book and press Select.
Scroll to Add name/number and press Select.
Write the name of the contact using the digits 0-9 (refer to “Using the
5
6
Scroll to number and enter the number to be stored (max. 24 digits).
Press Save to store name and number.
Note: If display shows Memory full, it is necessary to delete one or more
Polycom, Inc.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Incoming Calls
Call Register
The call register menu can store up to 40 of your incoming, outgoing and
missed calls. Call register is divided into lists of: incoming calls, outgoing calls
and missed calls.
If memory of call register is full, the handset will automatically erase the oldest
call when a new call is received in call register. If you want to delete calls from
Note: When you turn off the handset, all content of call register is deleted if
the subscribed system does not resend the information to the handset.
Incoming Calls
Incoming call is a list of all your incoming calls sorted by date and time of the
call, starting with the latest call.
If name and number of incoming call already exits in your phone book, the
incoming call will be represented with the name of the contact. If name and
number do not exist in your phone book, the handset cannot recognize the
number and the incoming call will only be represented by the number.
In both cases, incoming call register provides details about incoming calls, such
as time, date and length of conversation.
It is possible to add name and number of an incoming call to phone book or to
delete an incoming call from the list.
Viewing List of Incoming Calls
1
2
3
Press Menu to enter main menu.
Scroll to Call Register and press Select.
Scroll to Incoming Calls and press Select.
Adding an Incoming Call to Phone Book
If you have an incoming call and the number is not in phone book it is possible
to add it to phone book from the incoming call list.
1
2
3
Press Menu to enter main menu.
Scroll to Call Register and press Select.
Scroll to Incoming Calls and press Select.
38
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
CallRegister
4
5
6
7
Scroll to the desired call and press Details.
Press Options.
Scroll to Add to phone book and press Select
Write the name of the contact using the digits 0-9 (refer to “Using the
Deleting an Incoming Call from List
1
2
3
4
5
6
Press Menu to enter main menu.
Scroll to Call Register and press Select.
Scroll to Incoming Calls and press Select.
Scroll to the desired call and press Details.
Press Options and scroll to Delete from list.
Press Select to confirm.
Outgoing Calls
Outgoing calls is a list of all your outgoing calls sorted by date and time of the
call, starting with the latest call.
If name and number of the outgoing call already exits in your phone book, the
outgoing call will be represented with the name of the contact. If name and
number do not exist in your phone book, the handset can not recognize the
number and the outgoing call will only be represented by the number.
In both cases, outgoing call register provides details about outgoing calls, such
as time, date and length of conversation.
It is possible to add name and number of an outgoing call to your phone book,
or to delete an outgoing call from the list.
Viewing List of Outgoing Calls
1
Press Menu to enter main menu.
2
3
Scroll to Call Register and press Select.
Scroll to Outgoing Calls and press Select.
Adding an Outgoing Call to Phone Book
If you have made a call and the number is not in phone book, it is possible to
add it to phone book from the outgoing call list.
1
2
Press Menu to enter main menu.
Scroll to Call Register and press Select.
Polycom, Inc.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Missed Calls
3
4
5
6
7
Scroll to Outgoing Calls and press Select.
Scroll to the desired call and press Details.
Press Options.
Scroll to Add to phone book and press Select.
Write the name of the contact using the digits 0-9 (refer to “Using the
Deleting an Outgoing Call from List
1
2
3
4
5
6
Press Menu to enter main menu.
Scroll to Call Register and press Select.
Scroll to Outgoing Calls and press Select.
Scroll to the desired call and press Details.
Press Options and scroll to Delete from list.
Press Select to confirm.
Missed Calls
Missed calls is a list of all your missed calls sorted by date and time of the call,
starting with the latest call.
If the name and number of the missed call already exits in your phone book, the
missed call will be represented with the name of the contact. If the name and
number do not exist in your phone book, the handset cannot recognize the
number and the missed call will only be represented by the number.
In both cases, missed call register provides details about missed calls, such as
time, date and length of conversation.
It is possible to add name and number of a missed call to your phone book or
to delete a missed call from the list.
Viewing List of Missed Calls
1
2
3
Press Menu to enter main menu.
Scroll to Call Register and press Select.
Scroll to Missed Calls and press Select.
Adding a Missed Call to Phone Book
If you have a missed call and the number is not in phone book, it is possible to
add it to phone book from the missed call list.
1
Press Menu to enter main menu.
40
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
CallRegister
2
3
4
5
6
7
Scroll to Call Register and press Select.
Scroll to Missed Calls and press Select.
Scroll to the desired missed call and press Details.
Press Options.
Scroll to Add to phone book and press Select.
Write the name of the contact using the digits 0-9 (refer to “Using the
Deleting a Missed Call from List
1 Press Menu to enter main menu.
1
2
3
4
5
Scroll to Call Register and press Select.
Scroll to Missed Calls and press Select.
Scroll to the desired missed call and press Details.
Press Options and scroll to Delete from list.
Press Select to confirm.
Delete
The call register menu can store up to 40 of your incoming, outgoing and
missed calls. If the memory of call register is full, the handset will automatically
erase the oldest call when a new call need to be stored in the call register.
If you want to erase manually, use the following delete functions to empty lists
in the call register.
Deleting All Incoming Calls
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Call Register and press Select.
Scroll to Delete and press Select.
Scroll to Incoming calls and press Select.
Press Yes to empty list.
Deleting All Outgoing Calls
1
2
Press Menu to enter main menu.
Scroll to Call Register and press Select.
Polycom, Inc.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Delete
3
4
5
Scroll to Delete and press Select.
Scroll to Outgoing calls and press Select.
Press Yes to empty list.
Deleting All Missed Calls
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Call Register and press Select.
Scroll to Delete and press Select.
Scroll to Missed calls and press Select.
Press Yes to empty list.
Deleting All Calls from All Lists
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Call Register and press Select.
Scroll to Delete and press Select.
Scroll to All calls and press Select.
Press Yes to empty all folders.
42
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Messages
Messages
If supported by the subscribed system, you can write, send and receive
messages from the messages menu. You write messages using the
alphanumeric keyboard. For more information, refer to “Using the
All messages are automatically stored in inbox or outbox.
The inbox is a list of all received messages, while outbox is a list of all sent
messages. Both lists are sorted by time and date, starting with the latest.
If the name and number of the message already exits as a contact in your phone
book, the message in the inbox or outbox will be represented with the name of
the contact. If the name and number do not exists in your phone book, the
handset cannot recognize the number and the message will only be represented
by the number.
If you save a message in outbox for later handling, the message will be
represented by the beginning of the text message.
Inbox and outbox can store up to 20 messages in total. A maximum of 72 letters,
including spaces, is allowed for each message.
If the memory of inbox and outbox is full, the handset will automatically erase
the oldest message when a new message need to be stored.
If you want to delete messages from inbox or outbox manually, refer to
Writing and Sending a New Message
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Messages and press Select.
Scroll to New message and press Select.
Write a message.
Optionally, you can use a template: Press Options, scroll to Use template,
press Select, scroll to desired template, press Options, scroll to Select and
6
Press Options and scroll to Send.
Polycom, Inc.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Delete
7
8
Press Select and then press Search to find the receiver.
To find a name you can:
— Scroll until you reach the desired name. To scroll through the names
quickly press the navigation key continuously.
— Use quick search by pressing the first letter(s) (max. 5 letters) of the
desired name (refer to “Using the Alphanumeric Keyboard” on page
33).
9
Press Select.
10 If more than one number: scroll to desired number.
11 Press Select and then press Send.
12 When the message has been sent, the envelope icon
will appear. Press
Ok to accept.
Clearing Text Field
Use the clear text function, when you are writing a new message and want to
start all over.
1
2
Press Options.
Scroll to Clear text and press Select.
Saving a New Message in Outbox
You can write a message and then save it in outbox for later handling.
1
2
3
4
5
6
Press Menu to enter main menu.
Scroll to Messages and press Select.
Scroll to New message and press Select.
Write a message and press Options.
Scroll to Save message and press Select.
Scroll to Outbox and press Select.
Saving a New Message as a Template
After writing a message you can save it as a template for later use.
1
2
3
4
5
6
7
Press Menu to enter main menu.
Scroll to Messages and press Select.
Scroll to New message and press Select.
Write a message and press Options.
Scroll to Save message and press Select.
Scroll to Templates and press Select.
If memory is full: press Ok.
44
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Messages
8
Scroll to the desired position and press Select.
Saving a Received Message as a Template
You can save a message from inbox as a template for later use.
1
2
3
4
5
6
7
8
9
Press Menu to enter main menu.
Scroll to Messages and press Select.
Scroll to Inbox and press Select.
Scroll to desired message and press Select.
Press Options.
Scroll to Forward and press Select.
Press Options.
Scroll to Save message and press Select.
Scroll to Templates and press Select.
Sending Messages Using Templates
You can create up to 10 templates in relation to the kind of message you often
need to send. To create a new template, refer to “Saving a New Message as a
45.
When using a template in a message you have two options:
•
•
Use a template from the very beginning of the process (see below)
Insert a template in a message when you are in the process of writing a
To use a template in a message:
1
2
3
4
5
6
7
8
9
Press Menu to enter main menu.
Scroll to Messages and press Select.
Scroll to Templates and press Select.
Scroll to the desired template and press Option.
Scroll to Select and press Select.
If relevant, write additional text.
Press Options.
Scroll to Send and press Select.
Press Search to find the receiver.
10 To find a name you can:
Polycom, Inc.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Reading a Message
— Scroll until you reach the desired name. To scroll through the names
quickly press the navigation key continuously.
— Use quick search by pressing the first letter(s) (max. 5 letters) of the
desired name (refer to “Using the Alphanumeric Keyboard” on page
33).
11 Press Select.
12 If more than one number: scroll to desired number.
13 Press Select and then press Send.
Reading a Message
In addition to the messages for general use as described in this chapter, you can
receive other types of messages. These types of messages cannot be sent from
your handset, but are sent from an external application. The external
applications may vary from system to system. For more information, please
contact your system administrator.
Examples of messages sent from an external application are:
•
Long messages
Long messages have a maximum length of 72 characters and are saved
in inbox in the handset. If supported by the subscribed system, you can
also write and send this type of messages from your handset.
•
•
Short messages
Short messages have a maximum length of 36 characters and is not
saved in the handset.
Call back messages
Call back messages also contain contact information.
In the following, you will find a description of how to read the different types
of messages.
Reading a Long Message
The envelope icon
appears in the display, when you receive a long message.
To read the long message:
1
2
Press Details to enter inbox.
Scroll to the desired message and press Select. Time and date of message
is shown above the text message.
Note: New messages appear in the beginning of the list as they are sorted
by time and date, starting with the latest.
Note: Read messages are marked with an X in inbox.
46
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Messages
To read the long message later:
á If you want to read the message later, press Exit.
The envelope icon will then be placed in the status bar, indicating that
there is an unread message in inbox.
Reading a Short Message
The envelope icon
and the text message appear in the display, when you
receive a short message.
To delete the short message:
•
Press OK.
Reading a Call Back Message
The envelope icon , text message and contact information appear in the
display, when you receive a call back message. The display shows text message
and contact information alternately.
To act on the call back message:
á Press
to call the call back number in the message.
To delete the call back message:
á Press Ok.
Replying a Message
When you want to reply a message from your inbox, you have three options:
•
•
•
Write a new message in an empty screen
Write in continuation of original text (received message)
Insert a template
Reply Using an Empty Screen
1
2
3
4
5
6
Press Menu to enter main menu.
Scroll to Messages and press Select.
Scroll to Inbox and press Select.
Scroll to the desired received message and press Select.
Press Options.
Scroll to Reply and press Select.
Polycom, Inc.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Reading a Message
7
8
9
Scroll to Empty screen and press Select.
Write a message and press Options.
Scroll to Send and press Select.
10 Press Send.
Reply in Continuation of Original Text
Note: Original text refers to the received text message.
1
2
3
4
5
6
7
8
9
Press Menu to enter main menu.
Scroll to Messages and press Select.
Scroll to Inbox and press Select.
Scroll to the desired received message and press Select.
Press Options.
Scroll to Reply and press Select.
Scroll to Original text and press Select.
Write a message in continuation of received message and press Options.
Scroll to Send and press Select.
10 Press Send.
Reply Using a Template
1
2
3
4
5
6
7
8
9
Press Menu to enter main menu.
Scroll to Messages and press Select.
Scroll to Inbox and press Select.
Scroll to the desired message and press Select.
Press Options.
Scroll to Reply and press Select.
Scroll to Template and press Select.
Scroll to the desired template and press Options.
Scroll to Select and press Select.
10 If relevant, write additional text.
11 Press Options.
12 Scroll to Send and press Select. Then press Send.
Forwarding a Message
If you want to forward a message to a contact, do the following:
1
Press Menu to enter main menu.
48
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Messages
2
3
4
5
6
7
8
Scroll to Messages and press Select.
Scroll to Inbox and press Select.
Scroll to the desired received message and press Select.
Press Options.
Scroll to Forward and press Select.
Press Send and then press Search.
To find a name you can:
— Scroll until you reach the desired name. To scroll through the names
quickly press the navigation key continuously.
— Use quick search by pressing the first letter(s) (max. 5 letters) of the
desired name (refer to “Using the Alphanumeric Keyboard” on page
33).
9
Press Select
10 If more than one number: scroll to desired number.
11 Press Select and then press Send.
Resending a Message
If you want to resend a message to a contact, do the following:
1
2
3
4
5
6
7
8
9
Press Menu to enter main menu.
Scroll to Messages and press Select.
Scroll to Outbox and press Select.
Scroll to the desired message and press Select.
Press Options.
Scroll to Resend and press Select.
Press Options.
Scroll to Send and press Select.
Press Send.
Erasing a Single Template
Use this function to delete a template, or replace the template with a new
template when the memory is full. For more information about replacing a
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Messages and press Select.
Scroll to Templates and press Select.
Scroll to the desired template and press Options.
Scroll to Erase and press Select.
Polycom, Inc.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Reading a Message
6
Press Yes to erase the template.
Erasing a Single Message
The handset will automatically erase the oldest message when the memory of
If you want to delete a message manually, do the following:
1
2
3
4
5
6
7
Press Menu to enter main menu.
Scroll to Messages and press Select.
Scroll to Inbox or Outbox and press Select.
Scroll to the desired message and press Select.
Press Options.
Scroll to Erase and press Select.
Press Yes to erase the message.
Erase All Read Messages from Inbox
Use this function to erase all read messages from inbox. This way you do not
risk erasing messages that you have not had time to read yet.
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Messages and press Select.
Scroll to Erase messages and press Select.
Scroll to All read and press Select.
Press Yes to erase all read messages from inbox.
Erase All Messages from Inbox
Use this function to erase all messages from inbox.
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Messages and press Select.
Scroll to Erase messages and press Select.
Scroll to Inbox and press Select.
Press Yes to erase all messages from inbox.
Note: If you only want to erase a single message from inbox, refer to
Erase All Messages from Outbox
Use this function to erase all messages from your outbox.
1
Press Menu to enter main menu.
50
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Messages
2
3
4
5
Scroll to Messages and press Select.
Scroll to Erase messages and press Select.
Scroll to Outbox and press Select.
Press Yes to erase all messages from outbox.
Note: If you only want to erase a single message from the outbox, see
Erase All Messages
Use this function to erase all messages from inbox and outbox. If you want to
be sure not to erase unread messages, refer to “Erase All Read Messages from
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Messages and press Select.
Scroll to Erase messages and press Select.
Scroll to All and press Select.
Press Yes to erase all messages from all folders.
Polycom, Inc.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Silent
Status
The status menu provides an overview of some of the handset settings and
works as a shortcut to these making it easy to change the settings according to
your needs. The status menu also provides information about battery capacity.
In the following you will find a description of the settings to be found in the
status menu.
Silent
When silent mode is turned on, the handset will not ring when a call arrives.
However, you will still be able to see the arriving call in the display.
For more information about changing settings for silent mode, refer to “Silent
Headset
Auto Answer
Using headset allows you to keep up your activities and use the phone at the
same time.
For more information about changing settings for headset, refer to “Headset”
When auto answer is turned on, the handset automatically goes off hook when
ringing.
If subscribed to a wireless solution, the handset automatically goes on hook
when calls are terminated.
For more information about changing settings for auto answer, refer to “Auto
52
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Status
Battery
The battery function shows remaining battery capacity.
The indication on the display is not necessarily an exact reflection of the
remaining speech time, but only an indication of the voltage on the battery.
To check remaining battery capacity:
1
2
Press Menu to enter main menu.
Scroll to Status and press Select.
Ringing Tone
Volume
The ring tone is followed by a number indicating the chosen tone of the ringer.
You can distinguish between an internal and external call by the ring tone. The
ring tone of an internal call is followed by three short beeps (system dependent
feature).
For more information about changing ring tone, refer to “Ringing Tone” on
Adjusts ringing volume according to the noise level of the surrounding
environment.
For more information about adjusting ringing volume, refer to “Ringing
Firmware Version
Information about the firmware version provided for the system administrator.
Polycom, Inc.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Ringing Volume
Settings
The setting menu offers you the opportunity to customize the handset
according to your needs. The settings can be changed at any time. The setting
menu consists of: ringing volume, ringing tone, alerting volume, vibrator, silent
mode, auto key lock, backlight, auto answer, out of range and advanced
settings.
Note: Advanced settings are described separately in the next chapter.
In the following you will find a description of how to customize the handset.
Ringing Volume
To adjust the volume of the ring tone:
1
2
3
4
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Ringing volume and press Select.
Press left or right side of navigation key to adjust the volume of the ring
tone.
5
Press Set.
Ringing Tone
The ring tone is followed by a number indicating the chosen tone of the ringer.
You can distinguish between an internal and external call by the ring tone. The
ring tone of an internal call is followed by three short beeps (system dependent
feature).
To choose a new ring tone:
1
2
3
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Ringing tone and press Select.
54
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Settings
4
Scroll to the desired ring tone and press Change to select and listen to the
chosen ring tone. Repeat the process if you want to choose and listen to
other ring tones.
Alerting Volume
Alerts are short beeps that appear when:
•
•
•
•
•
•
You receive a new message.
You send a message.
The handset is moving out of range.
The handset is out of range.
The battery capacity is low.
You create a login.
To adjust alerting volume:
1
2
3
4
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Alerting volume and press Select.
Press the left or right side of the navigation key to adjust the volume of the
ringer.
5
Press Set.
Vibrator
When vibrator is turned on, the handset will vibrate when an incoming call
arrives.
To turn vibrator on/off:
1
2
3
4
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Vibrator and press Select.
Scroll to On or Off and press Change.
Note: When charging, handset will not vibrate.
Polycom, Inc.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Silent Mode
Silent Mode
When silent mode is turned on, the handset will not ring when a call arrives.
However, you will still be able to see the arriving call in the display.
To turn silent mode on/off:
1
2
3
4
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Silent mode and press Select.
Scroll to On or Off and press Change.
Note: It is also possible to turn Silent mode on or off without entering
menu. While on hook, press Menu followed by #.
Changing Settings of Silent Mode
When silent mode is turned on, you can select other ways of indicating
incoming calls or messages:
•
•
•
Display flashing
When turned on, the display will flash when an incoming call or
message arrives.
Vibrator
When turned on, the handset will vibrate when an incoming call or
message arrives.
Short ring
When turned on, a short ring will appear when an incoming call arrives.
To change settings of silent mode:
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Silent Mode and press Select.
Scroll to Settings and press Change.
Scroll to the desired setting and press Select.
Auto Key Lock
Use auto key lock to prevent keys from being accidentally pressed.
With auto keylock turned on the handset will automatically lock keypad after
30 seconds. To manually lock/unlock keypad, press Menu followed by ꢀ.
56
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Settings
To turn auto key lock on/off:
1
2
3
4
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Auto key lock and press Select.
Scroll to On or Off and press Change.
To answer a call when auto key lock is on, press
keypad automatically locks.
. When you end the call,
Backlight
The display backlight automatically turns on when an incoming call or message
arrives, or a key is pressed.
The backlight turns off when handset is in standby mode after a preset period
of time delay.
Setting Backlight at Dimmed
When setting display backlight at dimmed, display information can still be seen
vaguely when handset is in standby mode.
1
2
3
4
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Backlight and press Select.
Scroll to Dimmed and press Change.
Turning Backlight Off
Turning display backlight off when handset is in standby mode will save
battery power.
1
2
3
4
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Backlight and press Select.
Scroll to Off and press Change.
Adjusting Backlight Delay
You can adjust the period of time before backlight turns off when handset is in
standby mode.
1
2
3
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Backlight and press Select.
Polycom, Inc.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Auto Answer
4
5
6
Scroll to Delay and press Change.
Press left and right side of navigation key to adjust backlight delay.
Press Set.
Auto Answer
When auto answer is turned on, the handset automatically goes off hook when
an incoming call arrives.
If subscribed to a wireless solution, the handset automatically goes on hook
when calls are terminated.
1
2
3
4
5
To turn auto answer on/off:
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Auto answer and press Select.
Scroll to On or Off and press Change.
Note: When charging, auto answer is inactive.
Changing Settings of Auto Answer
When auto answer is turned on, you can select different situations where to use
auto answer.
Settings of auto answer are:
•
•
•
•
Lift from charg.
When turned on, the handset automatically goes off hook when
removed from charger.
After 1. ring
When turned on, the handset automatically goes off hook after the first
ring.
When headset
When turned on, the handset automatically goes off hook, when you are
using a headset.
Loadspeaker on
When turned on, the handset automatically goes off hook and turns on
loadspeaker.
To change settings of auto answer:
1
2
Press Menu to enter main menu.
Scroll to Settings and press Select.
58
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Settings
3
4
5
Scroll to Auto answer and press Select.
Scroll to Settings and press Change.
Scroll to the desired setting and press Select.
Out of Range
The out of range indicator appears when handset is moving out of or already is
out of range of base station.
Note: When the handset has been outside the coverage area, it can take up
to 30 seconds before the handset is back on the system after re-entering
coverage area.
To turn out of range on/off:
1
2
3
4
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Out of range and press Select.
Scroll to On or Off and press Change.
Changing Settings of Out of Range
The handset offers two types of out of range alerts:
Icon only
Tone (beep) + icon
With the out of range indicator turned on:
•
•
•
If handset is moving out of range, the low signal icon
display.
will appear in
will appear in display.
•
If the handset gets out of range, the no signal icon
If tone + icon is selected, beeps will appear with short intervals as long as
the handset is out of range.
To change the settings:
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Out of range and press Select.
Scroll to Settings and press Change.
Scroll to the desired alert and press Select.
Polycom, Inc.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Bluetooth (only KIRK 5040)
Bluetooth (only KIRK 5040)
Bluetooth allows you to connect the handset to a compatible device with
bluetooth connectivitiy within 10 metres (32 feet). When a wireless headset is
connected to the KIRK 5040, it is possible to disconnect the headset from the
handset (12.10.5) , to connect the headset to the handset again (12.10.6), to
remove the headset from the device list (12.10.7), to connect automatically to
the handset (12.10.8), to adjust the headset volume (12.10.9), to switch the audio
between the headset and the handset (12.10.10), and finally it is possible to
redial the last number entered in the handset (12.10.11).
Activate Bluetooth Function
To use the bluetooth funcition, you must activate the bluetooth function.
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Bluetooth and press Select.
Scroll to Active and press Select.
Scroll to On and press Select. The Bluetooth function is now activated.
Pair Wireless Headset with the Handset
When setting up a bluetooth connection, you will need to search for a
compatible device with bluetooth connectivity in order to pair this device to
your handset. You will need a pin code of 1-16 numeric characters. (Consult the
user guide of the Bluetooth headset for the pin code information). You are only
asked to enter this pin code the first time you connect to the device.
1
2
3
4
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Bluetooth and press Select.
Scroll to Search to search for compatible bluetooth headset and press
Select.
5
Select the headset code number listed in the display of the handset and
press Stop, then press Add.
6
7
8
9
Enter pin code and press Ok .
Press Ok, and press Options in order to connect to the headset.
Scroll to Connect and press Select.
Press Ok. The wireless headset is now connected to your KIRK 5040
Handset.
Deactivate Bluetooth
Press Menu to enter main menu.
1
60
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Settings
2
3
4
5
Scroll to Settings and press Select.
Scroll to Bluetooth and press Select.
Scroll to Active and press Select.
Activate Off by pressing Select. Bluetooth is now deactivated, and any
bluetooth device connected to the handset has now been disconnected.
Activate Bluetooth Again
1
2
3
4
5
6
7
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Bluetooth and press Select.
Scroll to Device list and press Select.
Press Yes, and Bluetooth is activated again.
Press Options and scroll to Connect.
Press Select to connect to the headset again.
Disconnect Wirelees Headset.
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Bluetooth and press Select.
Scroll to Active and press Select.
Scroll to Disconnect headset, press Select and press Yes to disconnect the
headset.
Connect Wireless Headset again
1
2
3
4
5
6
7
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Bluetooth and press Select.
Scroll to Active and press Select.
Activate On by pressing Select, then press Exit.
Press Options and scroll to Connect.
Press Select, then press Ok. The wireless headset is now connected to your
KIRK 5040 Handset.
Remove Wireless Headset from the Device List
1
2
Press Menu to enter main menu.
Scroll to Settings and press Select.
Polycom, Inc.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Bluetooth (only KIRK 5040)
3
4
5
6
7
Scroll to Bluetooth and press Select.
Scroll to Device list and press Select.
Press Options.
Scroll to Delete and press Select.
Press Yes to remove the headset from the device list.
Auto Connect
It is possible to connect automatically to the handset when the headset is turned
on.
1
2
3
4
5
6
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Bluetooth and press Select.
Scroll to Active and press Select.
Scroll to Settings and press Select.
Activate Auto connet by pressing Select, then press Back. The wireless
headset will now connect automatically to the handset when the headset is
turned on.
Wireless Headset Volume
When the handset is on hook, it is possible to adjust the start speaking
volume of the wireless headset.
1
2
3
4
5
6
7
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Bluetooth and press Select.
Scroll to Active and press Select.
Scroll to Settings and press Select.
Scroll to Headset volume and press Select.
Press left or right side of navigation key to adjust the volume.
Switch Between Wireless Headset and Handset
When the headset is active and the handset is off hook, the audio can be
switched between the headset and the handset
1
Activate handset / headset soft key by pressing the left or the right side of
the navigation key.
2
3
Press Handset, and the audio is switched to the handset.
Press Headset, and the audio is switched back to the headset.
62
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Settings
Last Number Redial
Consult the user guide of the wireless headset for last number redial
instructions.
Advanced...
In the setting menu it is also possible to define the following advanced settings:
language, any key answer, headset, long key, login and time and date.
Language
There are 10 predefined languages in the handset: English, Spanish, French,
German, Dutch, Czech, Italian, Polish, Finnish, Danish, Norwegian and
Swedish.
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Advanced and press Select.
Scroll to Language and press Select.
Scroll to the desired language and press Select.
Any Key Answer
When turned on, you can answer a call by pressing any key.
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Advanced and press Select.
Scroll to Any key answer and press Select.
Scroll to On or Off and press Change.
Headset
Using headset allows you to keep up your activities and use the phone at the
same time.
Turning Alert of Headset On/Off
When the alert of headset is turned off, only the handset will ring when a call
arrives. When the alert of headset is turned on, you can also hear the ring tone
in your headset when a call arrives.
Note: The headset alert is not available if Silent mode is activated.
Polycom, Inc.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Advanced...
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Advanced and press Select.
Scroll to Headset and press Select.
Scroll to Alert on or Alert off and press Change.
Adjusting Volume of Headset
1
2
3
4
5
6
7
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Advanced and press Select.
Scroll to Headset and press Select.
Scroll to Headset Volume and press Change.
Press left or right side of the navigation key to adjust volume.
Pres Set.
Long Key
The long key function supports system features and defines a long key press to
digits between 0-9. The long key press can be defined as speed dials (refer to
“Speed Dial” on page 26) or as MSF messages. MSF messages are system
dependent. If supported by the subscribed system, a MSF message sent to the
system could for example return system features to the handset.
To change long key definition:
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Advanced and press Select.
Scroll to Long key and press Select.
Scroll to desired definition and press Change.
Login
Before you can use the registered handset it is necessary to subscribe the
handset to a system (login). The handset can be subscribed to up to 10 different
Selecting a Login
If you want to change to another system manually, do the following:
64
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Settings
1
2
3
4
5
6
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Advanced and press Select.
Scroll to Login and press Select.
Scroll to Select Login and press Select.
Scroll to the desired login and press Select.
Removing a Login
Logins can be removed from the system in use and from the 9 other systems (if
connected).
Note: Removing a login requires a password. Password is factory set at
0000.
1
2
3
4
5
6
7
8
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Advanced and press Select.
Scroll to Login and press Select.
Scroll to Remove login and press Select.
Scroll to the desired login and press Select.
Enter your password and press Ok.
If the system in use is removed, it is necessary to select one of the
remaining systems or to subscribe to a new one.
Note: If one of the systems not chosen is removed, the handset remains
connected to the system in use.
Creating a Login
To create a login, the system must allow subscriptions to be made. Some
systems also require an Authentication Code (AC). If more than one system
currently permits subscription, you will need to know the ID of the system to
which you want to subscribe. Authentication Codes and system ID’s will be
provided be the system administrator.
You can subscribe up to 15 systems, that is create 15 logins.
1
2
3
4
5
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Advanced and press Select.
Scroll to Login and press Select.
Scroll to Create login and press Select. The handset will start searching for
a system.
6
Scroll to the found system and press Select.
Polycom, Inc.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Advanced...
7
8
If required, enter an AC Code and press Ok to connect to the system.
Press Ok.
Note: If the handset is already subscribed to 15 systems, you will have to
Selecting Login Automatically
When auto login is turned on, the handset automatically change to another
system when necessary. Auto login should only be used when systems are
separate, with no overlaps.
Note: To activate auto login your handset must be subscribed to at least
two systems.
1
2
3
4
5
6
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Advanced and press Select.
Scroll to Login and press Select.
Scroll to Auto login and press Select.
If Off is selected, press Change to select On.
The handset automatically selects a system. The selected system is
marked with an A.
Time & Date
Note: When you turn off the handset, the settings of time are deleted if the
subscribed system does not resend the information to the handset.
Choose Time Format
1
2
3
4
5
6
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Advanced and press Select.
Scroll to Time & date and press Select.
Scroll to Time format and press Select.
Scroll to desired time format and press Change.
Set Time
1
2
3
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Advanced and press Select.
66
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Settings
4
5
6
7
8
Scroll to Time & date and press Select.
Scroll to Change time and press Select.
Place cursor on the digit, you want to change.
Press a digit. The cursor will then automatically jump to the next digit.
Press Change.
Choose Date Format
1
2
3
4
5
6
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Advanced and press Select.
Scroll to Time & date and press Select.
Scroll to Date format and press Select.
Scroll to desired date format and press Change.
Set Date
1
2
3
4
5
6
7
8
9
Press Menu to enter main menu.
Scroll to Settings and press Select.
Scroll to Advanced and press Select.
Scroll to Time & date and press Select.
Scroll to Change date and press Select.
Scroll to desired date format and press Change.
Place cursor on the digit, you want to change.
Press a digit. The cursor will then automatically jump to the next digit.
Press Change.
Polycom, Inc.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Troubleshooting
General Information
Troubleshooting
The handset freezes.
á Remove and replace battery pack. Press left softkey to turn on the handset.
The handset does not ring.
á Check whether Silent mode is turned On.
The handset cannot find a system ID at Create Login.
á Check whether the system is set to allow subscriptions.
The handset cannot subscribe even if system ID has been found.
á Check if Authentication Code is necessary.
Not possible to turn on the handset.
á Check if battery is connected. If yes, charge the battery.
The handset turns off when receiving a call and going off-hook.
á Charge the battery. If still a problem change the battery as it might be
defective.
Information
Error information
Improper function of the handset might be related to the infrastructure to
which the handset is connected to.
Before declaring a handset for repair be sure that the main system is operating
properly.
68
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
GeneralInformation
Technical Specification
Table 1-5 Approvals
Access profile:
EN 300444 V1.4.1:2002
EN 301 489 - 1: Version 1.4.1
EN 301 489 - 6: Version 1.2.1
Radio:
Safety:
EN 301 406 V1.5.1. 2003
EN 60950-1: 2001 + A11 + CORRIG
Size and weight
Size: 146 x 48 x 19mm
Weight: 110 g incl. battery 10 g
Capacity
5020: Active talking time up to 20 hours. 5040: Active talking time up
to 15 hours.
5020: Stand-by time up to 200 hours. 5040: Active talking time up to
100 hours.
Temperature and air pressure
Operating temperature: 0-40°C/32-104°F
Air pressure: Normal atmosphere condition
Important Safety Instructions and Product Information
Before using your telephone equipment, you should always follow basic safety
instruction to reduce the risk of fire, electrical shock and injury to persons, and
damage to property.
1
2
Read and understand all instructions
Follow all warnings and instructions including those marked on the
product
3
4
Unplug this product before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use damp cloth for cleaning
Do not install the telephone equipment in the bathroom or near a wash
bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming
pool
5
6
Slots or openings in the equipment are provided for ventilation to protect
it from over-heating. These openings must not be blocked or covered.
The product should be operated only from the type of power source
indicated on the instructions. If you are not sure of the type of power
supply, consult your dealer or local power company.
7
Do not overload wall outlets and extension cords as this can result in fire
or electrical shock.
Polycom, Inc.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Information
8
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short out parts that could
result in fire, electrical shock, or injury. Never spill liquid of any kind into
this product.
9
To reduce the risk of electrical shock or burns, do not disassemble this
product. Opening or removing covers may expose you to dangerous
voltages, dangerous electrical current, or other risks. Incorrect reassemble
can cause electrical shock when the appliance is subsequently used. If the
product need repair, consult your dealer.
10 Refer servicing to qualified service personnel.
11 Avoid using telephone during an electrical storm. There may be a risk of
electrical shock from lightning
12 Do not use the telephone to report a gas leak in the vicinity of the leak
13 Do not place the base or charger near microwave ovens, radio equipment,
or non-ground connected televisions.
14 This produce may retain small metal objects in the ear piece.
These appliances may cause electrical interference to the base or handset
1
The charger must be placed on a hard, flat surface and connected to a
functional 120 volt AC power source depending on the country of use.
2
This telephone will not operate in the event of a blackout. Please keep a
backup phone for emergencies
Intrinsic safety
Do not use the handset in conditions where there is a danger of electrically
ignited explosions.
Exposure to sunlight, heat and moisture
Do not expose the cordless phone to direct sunlight for long periods. Keep the
cordless phone away from excessive heat and moisture.
Spare parts and accessories
Use only approved spare parts and accessories. The operation of non-approved
parts cannot be guaranteed and may even cause damage.
Power failure
In the event of a power failure or flat battery, you cannot use the handset to
make or receive calls
Battery Precautions
1
2
Periodically clean the charge contacts on both the charger and handset.
Exercise care in handling batteries in order not to short the batteries with
conducting materials such as rings, bracelets, and keys. The batteries or
conducting material may overheat and cause burns or fire
3
Do not open or mutilate the batteries, released electrolyte is corrosive and
may cause damage to the eyes or skin. The electrolyte may be toxic of
swallowed.
70
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
GeneralInformation
4
5
During charging batteries heat up. This is normal and not dangerous
Do not use non-Nortel charging devices. This could damage the batteries
Notices
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection.
The customer should be aware that compliance with the above conditions may
not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative
designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic water
pipe system, if present, are connected together. This precaution may be
particularly important in rural areas
CAUTIONS: Users should not attempt to make such connections themselves,
but should contact the appropriate electric inspection authority, or electrician,
as appropriate.
If your telephone equipment causes harm to the telephone network, the
telephone company may ask you to disconnect the system from the line until
the problem has been corrected or they may discontinue your service
temporarily. If possible, they will notify you in advance, But if advance notice
is not practical, you should be notified as soon as possible. You will be informed
of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper functioning of your
telephone system, If they do and it is possible, you will be notified in advance
to give you an opportunity to maintain uninterrupted telephone service. If you
experience trouble with this telephone system, disconnect it from the network
until the problem has been corrected or until you are sure that the equipment
is not malfunctioning.
Note: This equipment has been tested and found to comply with the limits for
a class B digital device, pursuant to local regulations. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Polycom, Inc.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Information
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Power Outage: In the event of a power outage, your cordless telephone will not
operate. The cordless telephone requires electricity for operation. You should
have a telephone which does not require electricity available for use during
power outages.
Information to user: The users manual or instruction manual for an intentional
or unintentional radiator shall caution the user that changes or modifications
not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
International Regulatory and Product Information
Table 1-6 CE
This KIRK 5020 / 5040 Handset has been marked with
the CE mark. This mark indicates compliance with EEC
Directives 89/336/EEC, 73/23/EEC 1999/5/EC. A full
copy of the Declaration of conformity can be obtained
from Polycom Ltd, 270 Bath Road, Slough, Berkshire,
SL1 4DX, UK.
Table 1-7 1999/5/EF
Polycom (UK) Ltd tímto prohlašuje, že tento KIRK 5020 /
5040 Handset je ve shode se základními požadavky a
dalšími príslušnými ustanoveními smernice 1999/5/ES.
Cesky
[Czech]:
Undertegnede Polycom (UK) Ltd erklærer herved, at
følgende udstyr KIRK 5020 / 5040 Handset overholder de
væsentlige krav og øvrige relevante krav i direktiv
1999/5/EF.
Dansk
[Danish]:
Hiermit erklärt Polycom (UK) Ltd, dass sich das Gerät
KIRK 5020 / 5040 Handset in Übereinstimmung mit den
grundlegenden Anforderungen und den übrigen
einschlägigen Bestimmungen der Richtlinie 1999/5/EG
befindet.
Deutsch
[German]:
Käesolevaga kinnitab Polycom (UK) Ltd seadme KIRK
5020 / 5040 Handset vastavust direktiivi 1999/5/EÜ
põhinõuetele ja nimetatud direktiivist tulenevatele teistele
asjakohastele sätetele.
Eesti
[Estonian]:
72
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
GeneralInformation
Table 1-7 1999/5/EF
Hereby, Polycom (UK) Ltd. declares that this KIRK 5020 /
5040 Handset is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC.
English:
Por medio de la presente Polycom (UK) Ltd declara que el
KIRK 5020 / 5040 Handset cumple con los requisitos
esenciales y cualesquiera otras disposiciones aplicables o
exigibles de la Directiva 1999/5/CE.
Español
[Spanish]:
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Polycom (UK) Ltd ΔΗΛΩΝΕΙ ΟΤΙ
KIRK 5020 / 5040 handset ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ
ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ
ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Ελληνική
[Greek]:
Par la présente Polycom (UK) Ltd déclare que l'appareil
KIRK 5020 / 5040 Handset est conforme aux exigences
essentielles et aux autres dispositions pertinentes de la
directive 1999/5/CE.
Français
[French]:
Con la presente Polycom (UK) Ltd dichiara che questo
KIRK 5020 / 5040 Handset è conforme ai requisiti
essenziali ed alle altre disposizioni pertinenti stabilite dalla
direttiva 1999/5/CE.
Italiano
[Italian]:
Hér með lýsir Polycom (UK) Ltd yfir því að KIRK 5020 /
5040 Handset er í samræmi við grunnkröfur og aðrar
kröfur, sem gerðar eru í tilskipun 1999/5/EC
Íslenska
(Icelandic):
Ar šo Polycom (UK) Ltd deklare, ka KIRK 5020 / 5040
Handset atbilst Direktivas 1999/5/EK butiskajam
prasibam un citiem ar to saistitajiem noteikumiem.
Latviski
[Latvian]:
Šiuo Polycom (UK) Ltd deklaruoja, kad šis KIRK 5020 /
5040 Handset atitinka esminius reikalavimus ir kitas
1999/5/EB Direktyvos nuostatas.
Lietuviu
[Lithuanian]:
Hierbij verklaart Polycom (UK) Ltd dat het toestel KIRK
5020 / 5040 Handset in overeenstemming is met de
essentiële eisen en de andere relevante bepalingen van
richtlijn 1999/5/EG.
Nederlands
[Dutch]:
Hawnhekk, Polycom (UK) Ltd, jiddikjara li dan [il-mudel
tal-prodott] jikkonforma mal-htigijiet essenzjali u ma
provvedimenti ohrajn relevanti li hemm fid-Dirrettiva
1999/5/EC.
Malti
[Maltese]:
Alulírott, Polycom (UK) Ltd nyilatkozom, hogy a KIRK
5020 / 5040 Handset megfelel a vonatkozó alapvetõ
Magyar
[Hungarian]: követelményeknek és az 1999/5/EC irányelv egyéb
elõírásainak.
Polycom (UK) Ltd erklærer herved at utstyret KIRK 5020 /
Norsk
5040 Handset er i samsvar med de grunnleggende krav og
[Norwegian]:
øvrige relevante krav i direktiv 1999/5/EF.
Niniejszym Polycom (UK) Ltd oswiadcza, ze KIRK 5020 /
Polski
[Polish]:
5040 Handset jest zgodne z zasadniczymi wymaganiami
oraz innymi stosownymi postanowieniami Dyrektywy
1999/5/WE
Polycom, Inc.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Information
Table 1-7 1999/5/EF
Polycom (UK) Ltd declara que este KIRK 5020 / 5040
Handset está conforme com os requisitos essenciais e
outras disposições da Directiva 1999/5/CE.
Português
[Portuguese]:
Polycom (UK) Ltd izjavlja, da je ta KIRK 5020 / 5040
Handset v skladu z bistvenimi zahtevami in ostalimi
relevantnimi dolocili direktive 1999/5/ES.
Slovensko
[Slovenian]:
Polycom (UK) Ltd týmto vyhlasuje, že KIRK 5020 / 5040
Handset splna základné požiadavky a všetky príslušné
ustanovenia Smernice 1999/5/ES.
Slovensky
[Slovak]:
Polycom (UK) Ltd vakuuttaa täten että KIRK 5020 / 5040
Handset tyyppinen laite on direktiivin 1999/5/EY
oleellisten vaatimusten ja sitä koskevien direktiivin muiden
ehtojen mukainen.
Suomi
[Finnish]:
Härmed intygar Polycom (UK) Ltd att denna KIRK 5020 /
5040 Handset står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som
framgår av direktiv 1999/5/EG.
Svenska
[Swedish]:
Table 1-8 Explosive Device Proximity Warning
Warning Do not operate your wireless network device near
unshielded blasting caps or in an explosive environment unless
the device has been modified to be especially qualified for such
use.
Table 1-9 Explosive Device Proximity Warning
Gebruik dit draadloos netwerkapparaat alleen in de
buurt van onbeschermde ontstekers of in een
Waarschuwing omgeving met explosieven indien het apparaat
speciaal is aangepast om aan de eisen voor een
dergelijk gebruik te voldoen.
Älä käytä johdotonta verkkolaitetta
suojaamattomien räjäytysnallien läheisyydessä tai
Varoitus
räjäytysalueella, jos laitetta ei ole erityisesti
muunnettu sopivaksi sellaiseen käyttöön.oen.
Ne jamais utiliser un équipement de réseau sans fil à
proximité d'un détonateur non blindé ou dans un
Attention
lieu présentant des risques d'explosion, sauf si
l'équipement a été modifié à cet effet.
Benutzen Sie Ihr drahtloses Netzwerkgerät nicht in
der Nähe ungeschützter Sprengkapseln oder anderer
explosiver Stoffe, es sei denn, Ihr Gerät wurde
eigens für diesen Gebrauch modifiziert und
bestimmt.
Warnung
74
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
GeneralInformation
Table 1-9 Explosive Device Proximity Warning
Non utilizzare la periferica di rete senza fili in
prossimità di un detonatore non protetto o di
esplosivi a meno che la periferica non sia stata
modificata a tale proposito.
Avvertenza
Advarsel
Ikke bruk den trådløse nettverksenheten nært inntil
uisolerte fenghetter eller i et eksplosivt miljø med
mindre enheten er modifisert slik at den tåler slik
bruk.
Não opere o dispositivo de rede sem fios perto de
cápsulas explosivas não protegidas ou num
ambiente explosivo, a não ser que o dispositivo
tenha sido modificado para se qualificar
especialmente para essa utilização.
Aviso
No utilizar un aparato de la red sin cable cerca de un
detonador que no esté protegido ni tampoco en un
entorno explosivo a menos que el aparato haya sido
modificado con ese fin.
¡Advertencia!
Varning!
Använd inte den trådlösa nätverksenheten i
närheten av oskyddade tändhattar eller i en explosiv
miljö om inte enheten modifierats för att kunna
användas i sådana sammanhang.
Table 1-10 WEEE Marking
The WEEE Marking on this equipment indicates that
the product must not be disposed of with unsorted
waste, but must be collected separately.
guidance on battery recycling.
Important Safety Instructions
Before using your telephone equipment, you should always follow basic safety
instruction to reduce the risk of fire, electrical shock and injury to persons, and
damage to property.
1
2
Read and understand all instructions
Follow all warnings and instructions including those marked on the
product
3
Unplug this product before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use damp cloth for cleaning
Polycom, Inc.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Information
4
Do not install the telephone equipment in the bathroom or near a wash
bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming
pool
5
6
Slots or openings in the equipment are provided for ventilation to protect
it from over-heating. These openings must not be blocked or covered.
The product should be operated only from the type of power source
indicated on the instructions. If you are not sure of the type of power
supply, consult your dealer or local power company.
7
8
Do not overload wall outlets and extension cords as this can result in fire
or electrical shock.
Never push objects of any kind into this product through cabinet slots as
they may touch dangerous voltage points or short out parts that could
result in fire, electrical shock, or injury. Never spill liquid of any kind into
this product.
9
To reduce the risk of electrical shock or burns, do not disassemble this
product. Opening or removing covers may expose you to dangerous
voltages, dangerous electrical current, or other risks. Incorrect reassemble
can cause electrical shock when the appliance is subsequently used. If the
product need repair, consult your dealer.
10 Refer servicing to qualified service personnel.
11 Avoid using telephone during an electrical storm. There may be a risk of
electrical shock from lightning.
12 Do not use the telephone to report a gas leak in the vicinity of the leak.
13 Do not place the base or charger near microwave ovens, radio equipment,
or non-ground connected televisions. These appliances may cause
electrical interference to the base or handset
14 The charger must be placed on a hard, flat surface and connected to a
functional 120 volt AC power source depending on the country of use.
15 This telephone will not operate in the event of a blackout. Please keep a
backup phone for emergencies.
16 Installation must be performed in accordance with all relevant national
wiring rules.
17 Plug acts as Disconnect Device - The socket outlet to which this apparatus
is connected must be installed near the equipment and must always be
readily accessible.
18 This device and its antenna must not be co-located or operating in
conjunction with any other antenna or transmitter.
Intrinsic safety
Do not use the handset in conditions where there is a danger of electrically
ignited explosions.
76
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
GeneralInformation
Exposure to sunlight, heat and moisture
Do not expose the cordless phone to direct sunlight for long periods. Keep the
cordless phone away from excessive heat and moisture.
Spare parts and accessories
Use only approved spare parts and accessories. The operation of non-approved
parts cannot be guaranteed and may even cause damage.
Power failure
In the event of a power failure or flat battery, you cannot use the handset to
make or receive calls.
Battery Precautions
1
2
Periodically clean the charge contacts on both the charger and handset.
Exercise care in handling batteries in order not to short the batteries with
conducting materials such as rings, bracelets, and keys. The batteries or
conducting material may overheat and cause burns or fire.
3
Do not open or mutilate the batteries, released electrolyte is corrosive and
may cause damage to the eyes or skin. The electrolyte may be toxic of
swallowed.
4
5
During charging batteries heat up. This is normal and not dangerous.
Lithium cell installation Caution - Danger of Explosion if Battery is
incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries according to
the manufacturer’s instructions.
Notices
Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The
equipment must also be installed using an acceptable method of connection.
The customer should be aware that compliance with the above conditions may
not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative
designated by the supplier. Any repairs or alterations made by the user to this
equipment, or equipment malfunctions, may give the telecommunications
company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic water
pipe system, if present, are connected together. This precaution may be
particularly important in rural areas
Polycom, Inc.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Information
EMC:CAUTIONS: Users should not attempt to make such connections
themselves, but should contact the appropriate electric inspection authority, or
electrician, as appropriate.
If your telephone equipment causes harm to the telephone network, the
telephone company may ask you to disconnect the system from the line until
the problem has been corrected or they may discontinue your service
temporarily. If possible, they will notify you in advance, But if advance notice
is not practical, you should be notified as soon as possible. You will be informed
of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper functioning of your
telephone system, If they do and it is possible, you will be notified in advance
to give you an opportunity to maintain uninterrupted telephone service. If you
experience trouble with this telephone system, disconnect it from the network
until the problem has been corrected or until you are sure that the equipment
is not malfunctioning.
Note: This equipment has been tested and found to comply with the limits for
a class B digital device, pursuant to local regulations. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Hearing Aid Compatibility: This equipment is hearing-aid compatible, as
defined in Section 68.316 of Part 68 FCC Rules.
FCC Note: This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
SAR: Device has been tested for SAR compliance for head and body worn
configurations. The highest reported SAR values are: head 0.049 W/kg (5020)
/ 0.206 W/kg (5040) and body worn 0.075 W/kg(5020) / 0.330 W/kg (5040).
IC Note: Operation is subject to the following two conditions: (1) This device
may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
78
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
GeneralInformation
The Term “IC“: before the certification/registration number only signifies that
the Industry Canada technical specifications were met.
Privacy of communications may not be ensured when using this telephone.
Power Outage: In the event of a power outage, your cordless telephone will not
operate. The cordless telephone requires electricity for operation. You should
have a telephone which does not require electricity available for use during
power outages.
Information to user: The users manual or instruction manual for an intentional
or unintentional radiator shall caution the user that changes or modifications
not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE EMC: Cet appareil a été soumis à un essai et jugé conforme aux normes
régissant les limites établies pour un dispositif numérique de classe B,
conformément aux règlements locaux.Ces limites visent à assurer une
protection raisonnable contre des interférences pouvant nuire à l’appareil
utilisé dans un secteur résidentiel. Cet équipment génère et utilise des
radiofréquences, et peut en émettre. S’il n’est pas installé et utilisé selon les
directives fournies, il risque de perturber les radiocommunications.
L’exploitation de cet appareil dans un secteur particulier est toutefois
susceptible de produire des interférences nuisibles. Si cet équipement
provoque des interférences lors de la réception des radiofréquences ou des
fréquences de télévision, ce qui peut être vérifié en mettant l’appareil hors
tension, puis en le remettant sous tension, l’utilisateur doit prendre l’une des
mesures suivantes pour corriger la situation:
— réorienter ou relocaliser l’antenne de réception;
— augmenter la distance entre l’appareil et l’antenne de réception;
— brancher l’appareil à une prise d’un circuit différent de celui auquel
l’antenne est branchée;
— consulter le détaillant ou un technicien en radiotélévision d’expérience
pour obtenir de l’aide.
Polycom® Product Warranty Statement
The software included in this Product (including, without limitation, firmware
and all updated thereto, including any software that may be downloaded
electronically via the internet or otherwise (the “Software”) is licensed, not
sold. Customer shall not reverse compile, disassemble or otherwise reverse
engineer, embed within any other software product, or modify in any manner
with respect thereto, the Software in whole or in part.
THE TERMS AND CONDITIONS APPLICABLE TO POLYCOM’S
LIMITED WARRANTY ARE AS SET FORTH BELOW (AND ARE ALSO
INCLUDED IN THE DOCUMENTATION PACKAGED WITH NEW
POLYCOM PRODUCTS):
LIMITED WARRANTY. Polycom warrants to the end user (“Customer”) that
the product will be free from defects in workmanship and materials, under
normal use and service, for one year, or such longer period as Polycom may
announce publicly from time to time for particular products, from the date of
Polycom, Inc.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Information
purchase from Polycom or its authorized reseller. Polycom’s sole obligation
under this express warranty shall be, at Polycom’s option and expense, to
repair the defective product or part, deliver to Customer an equivalent product
or part to replace the defective item, or if neither of the two foregoing options
is reasonably available, Polycom may, in its sole discretion, refund to Customer
the purchase price paid for the defective product. All products that are replaced
will become the property of Polycom. Replacement products or parts may be
new or reconditioned. Polycom warrants any replaced or repaired product or
part for ninety (90) days from shipment, or the remainder of the initial warranty
period, whichever is longer. Products returned to Polycom must be sent
prepaid and packaged appropriately for safe shipment, and it is recommended
that they be insured or sent by a method that provides for tracking of the
package. Responsibility for loss or damage does not transfer to Polycom until
the returned item is received by Polycom. The repaired or replaced item will be
shipped to Customer, at Polycom's expense, not later than thirty (30) days after
Polycom receives the defective product, and Polycom will retain risk of loss or
damage until the item is delivered to Customer.
EXCLUSIONS. Polycom will not be liable under this limited warranty if its
testing and examination disclose that the alleged defect or malfunction in the
product does not exist or results from:
• Failure to follow Polycom's installation, operation, or maintenance
instructions.
• Unauthorized product modification or alteration.
• Unauthorized use of common carrier communication services accessed
through the product.
• Abuse, misuse, negligent acts or omissions of Customer and persons under
Customer's control; or
• Acts of third parties, acts of God, accident, fire, lighting, power surges or
outages, or other hazards.
WARRANTY EXCLUSIVE. IF A POLYCOM PRODUCT DOES NOT
OPERATE AS WARRANTED ABOVE, CUSTOMER'S SOLE REMEDY FOR
BREACH OF THAT WARRANTY SHALL BE REPAIR, REPLACEMENT, OR
REFUND OF THE PURCHASE PRICE PAID, AT POLYCOM'S OPTION. TO
THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES
AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER
WARRANTIES, TERMS, OR CONDITIONS,
EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW,
STATUTORY OR OTHERWISE, INCLUDING WARRANTIES, TERMS, OR
CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, SATISFACTORY QUALITY, CORRESPONDENCE WITH
DESCRIPTION, AND NON-INFRINGEMENT, ALL OF WHICH ARE
EXPRESSLY DISCLAIMED. POLYCOM NEITHER ASSUMES NOR
AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER
LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE OR USE OF ITS PRODUCTS.
SUPPORT & SERVICE AGREEMENTS. If you purchased your product from
a Polycom Authorized Reseller, contact the Authorized Reseller for
information about support and service agreements applicable to your product.
80
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
GeneralInformation
For information on Polycom service, go to the Polycom web site
www.polycom.com, products and services menu, or call 1-800-765-9266,
outside the US call 1-
408-526-9000, or your local Polycom Office, as listed on the Polycom Web site.
LIMITATION OF LIABILITY. TO THE FULL EXTENT ALLOWED BY LAW,
POLYCOM EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY,
WHETHER BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE),
FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR
PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR
PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR
OTHER FINANCIAL LOSS ARISING
OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF
ITS PRODUCTS, EVEN IF POLYCOM OR ITS AUTHORIZED RESELLER HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS
ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE
PURCHASE PRICE PAID, AT POLYCOM'S OPTION. THIS DISCLAIMER OF
LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY
PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
DISCLAIMER. Some countries, states, or provinces do not allow the exclusion
or limitation of implied warranties or the limitation of incidental or
consequential damages for certain products supplied to consumers, or the
limitation of liability for personal injury, so the above limitations and
exclusions may be limited in their application to you. When the implied
warranties are not allowed to be excluded in their entirety, they will be limited
to the duration of the applicable written warranty. This warranty gives you
specific legal rights which may vary depending on local law.
GOVERNING LAW. This Limited Warranty and Limitation of Liability shall
be governed by the laws of the State of California, U.S.A., and by the laws of the
United States, excluding their conflicts of laws principles. The United Nations
Convention on Contracts for the International Sale of Goods is hereby excluded
in its entirety from application to this Limited Warranty and Limitation of
Liability.
END-USER LICENSE AGREEMENT FOR POLYCOM SOFTWARE
IMPORTANT - READ CAREFULLY BEFORE USING THE SOFTWARE
PRODUCT:
This End-User License Agreement ("Agreement") is a legal agreement between
you (either an individual or a single entity) and Polycom, B.V for the
POLYCOM® SOFTWARE PRODUCT licensed by Polycom, B.V in Europe, the
Middle East, Africa, and Asia Pacific, or the POLYCOM SOFTWARE PRODUCT
licensed by Polycom, Inc. in the rest of the world (collectively referred to herein
as “POLYCOM”). The SOFTWARE PRODUCT includes computer software as
attached hereto and may include associated media, printed materials, and
"online" or electronic documentation ("SOFTWARE PRODUCT"). By clicking “I
agree” or by installing, copying, or otherwise using the SOFTWARE
PRODUCT, you agree to be bound by the terms of this Agreement. If you do
not agree to the terms of this Agreement, do not install or use the SOFTWARE
Polycom, Inc.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Information
PRODUCT, and return it to your place of purchase for a full refund. The
SOFTWARE PRODUCT is protected by copyright laws and international
copyright treaties, as well as other intellectual property laws and
treaties. The SOFTWARE PRODUCT is licensed (not sold) to you, and its use is
subject to the terms of this Agreement.
1. GRANT OF LICENSE.
Subject to the terms of this Agreement, POLYCOM grants to you a
non-exclusive license to install and use the SOFTWARE PRODUCT on the
POLYCOM product with which this SOFTWARE PRODUCT is supplied (the
“PRODUCT”). You may use the SOFTWARE PRODUCT only in connection
with the use of the PRODUCT. You are not permitted to lease, rent, distribute
or sublicense the SOFTWARE PRODUCT or to use the SOFTWARE PRODUCT
in a time-sharing arrangement or in any other unauthorized manner. Further,
no license is granted to you in the human readable code of the SOFTWARE
PRODUCT (source code). Except as provided below, this License Agreement
does not grant you any rights to patents, copyrights, trade secrets, trademarks,
or any other rights in respect to the SOFTWARE PRODUCT.
2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.
2.1 Limitations on Reverse Engineering, Decompilation, and Disassembly.
You may not reverse engineer, decompile, or disassemble the SOFTWARE
PRODUCT, except and only to the extent that such activity is expressly
permitted by applicable law notwithstanding this limitation. The SOFTWARE
PRODUCT is licensed as a single product. Its component parts may not be
separated for use on more than one PRODUCT.
2.2 Back-up. Except as expressly provided for under this Agreement you may
not copy the SOFTWARE PRODUCT; except, however, you may keep one copy
of the SOFTWARE PRODUCT and, if applicable, one copy of any previous
version, for back-up purposes, only to be used in the event of failure of the
original. All copies of the SOFTWARE PRODUCT must be marked with the
proprietary notices provided on the original SOFTWARE PRODUCT. You may
not reproduce the supporting documentation accompanying the SOFTWARE
PRODUCT.
2.3 Modifications. You may not modify, translate or create derivative works of
the SOFTWARE PRODUCT.
2.4 Proprietary Notices. You may not remove or obscure any proprietary
notices on or in the SOFTWARE PRODUCT or the supporting documentation.
2.5 Software Transfer. You may permanently transfer all of your rights under
this Agreement, provided you retain no copies, you transfer all of the
SOFTWARE PRODUCT (including all component parts, the media and printed
materials, any upgrades, this Agreement, and, if applicable, the Certificate of
Authenticity), and the recipient agrees to the terms of this Agreement. If the
SOFTWARE PRODUCT is an upgrade, any transfer must include all prior
versions of the SOFTWARE PRODUCT. However, if the SOFTWARE
PRODUCT is marked “Not for Resale” or “NFR”, you may not resell it or
otherwise transfer it for value.
82
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
GeneralInformation
2.6 Copyright. All title and copyrights in and to the SOFTWARE PRODUCT
(including but not limited to any images, photographs, animations, video,
audio, music, text, and "applets" incorporated into the SOFTWARE
PRODUCT), the accompanying printed materials, and any copies of the
SOFTWARE PRODUCT are owned by POLYCOM or its suppliers. The
SOFTWARE PRODUCT is protected by copyright laws and international treaty
provisions. Title, ownership rights, and intellectual property rights in the
SOFTWARE PRODUCT shall remain in POLYCOM or its suppliers. Title and
related rights in the content accessed through the SOFTWARE PRODUCT is
the property of such content owner and may be protected by applicable law.
This Agreement gives you no rights in such content.
2.7 Confidentiality. The SOFTWARE PRODUCT contains valuable proprietary
information and trade secrets of POLYCOM and its suppliers and you shall
protect the confidentiality of, and avoid disclosure and unauthorized use of, the
SOFTWARE PRODUCT.
2.8 Dual-Media Software. You may receive the SOFTWARE PRODUCT in
more than one medium. Regardless of the type or size of medium you receive,
you may use only one medium that is appropriate for your single PRODUCT.
You may not use or install the other medium on another PRODUCT.
2.9 Reservation. POLYCOM reserves all rights in the SOFTWARE PRODUCT
not expressly granted to you in this Agreement.
3. SUPPORT SERVICES.
POLYCOM may provide you with support services related to the SOFTWARE
PRODUCT("SUPPORT SERVICES "). Use of SUPPORT SERVICES is governed
by the POLYCOM policies and programs described in the POLYCOM -
provided materials. Any supplemental software code provided to you as part
of the SUPPORT SERVICES is considered part of the SOFTWARE PRODUCT
and is subject to the terms and conditions of this Agreement. With respect to
technical information you provide to POLYCOM as part of the SUPPORT
SERVICES, POLYCOM may use such information for its business purposes,
including for product support and development. POLYCOM will not utilize
such technical information in a form that personally identifies you.
4. TERMINATION.
Without prejudice to any other rights, POLYCOM may terminate this
Agreement if you fail to comply with any of the terms and conditions of this
Agreement. In such event, you must destroy all copies of the SOFTWARE
PRODUCT and all of its component parts. You may terminate this Agreement
at any time by destroying the SOFTWARE PRODUCT and all of its component
parts.
5. UPGRADES.
If the SOFTWARE PRODUCT is labeled as an upgrade, you must be properly
licensed to use the software identified by POLYCOM as being eligible for the
upgrade in order to use the SOFTWARE PRODUCT. A SOFTWARE
PRODUCT labeled as an upgrade replaces and/or supplements the software
that formed the basis for your eligibility for the upgrade. You may use the
resulting upgraded SOFTWARE PRODUCT only in accordance with the terms
of this Agreement. If the SOFTWARE PRODUCT is an upgrade of a component
of a package of software programs that you licensed as a single product, the
Polycom, Inc.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Information
SOFTWARE PRODUCT may be used and transferred only as part of that single
SOFTWARE PRODUCT package and may not be separated for use on more
than one PRODUCT.
6. WARRANTY AND WARRANTY EXCLUSIONS.
6.1 Limited Warranty. POLYCOM warrants that (a) the SOFTWARE
PRODUCT will perform substantially in accordance with the accompanying
documentation for a period of ninety (90) days from the date of receipt by you,
and (b) any SUPPORT SERVICES provided by POLYCOM shall be
substantially as described in applicable written materials provided to you by
POLYCOM, and POLYCOM support engineers will make commercially
reasonable efforts to solve any problem issues. POLYCOM does not warrant
that your use of the SOFTWARE PRODUCT will be uninterrupted or error free,
or that all defects in the SOFTWARE PRODUCT will be corrected. POLYCOM's
sole obligation under this express warranty shall be, at POLYCOM's option and
expense, to refund the purchase price paid by you for any defective software
product which is returned to POLYCOM with a copy or your receipt, or to
replace any defective media with software which substantially conforms to
applicable POLYCOM published specifications. Any replacement SOFTWARE
PRODUCT will be warranted for the remainder of the original warranty period
or thirty (30) days, whichever is longer.
6.2 Warranties Exclusive. IF THIS SOFTWARE PRODUCT DOES NOT
OPERATE AS WARRANTED ABOVE, YOUR SOLE REMEDY FOR BREACH
OF THAT WARRANTY SHALL BE REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT POLYCOM'S OPTION. TO THE FULL
EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND
REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER
WARRANTIES, TERMS, OR CONDITIONS, EXPRESS OR IMPLIED, EITHER
IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE,
INCLUDING WARRANTIES, TERMS, OR CONDITIONS OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
SATISFACTORY QUALITY, CORRESPONDENCE WITH DESCRIPTION,
AND NON-INFRINgeMENT, ALL OF WHICH ARE EXPRESSLY
DISCLAIMED. POLYCOM NEITHER ASSUMES NOR AUTHORIZES ANY
OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR
USE OF THIS SOFTWARE PRODUCT. POLYCOM SHALL NOT BE LIABLE
UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION
DISCLOSE THAT THE ALLEGED DEFECT OR MALFUNCTION IN THE
SOFTWARE PRODUCT DOES NOT EXIST OR WAS CAUSED BY YOUR OR
ANY THIRD PERSON'S MISUSE, NEGLECT, IMPROPER INSTALLATION
OR TESTING, UNAUTHORIZED ATTEMPTS TO MODIFY THE PRODUCT,
OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE,
OR BY ACCIDENT, FIRE, LIGHTNING, POWER CUTS OR OUTAGES,
OTHER HAZARDS, OR ACTS OF GOD.
7. LIMITATION OF LIABILITY.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO
EVENT SHALL POLYCOM OR ITS SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES
WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF
84
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
GeneralInformation
BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING
OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE PRODUCT
OR THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES,
EVEN IF POLYCOM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. IN ANY CASE, POLYCOM'S ENTIRE LIABILITY SHALL BE
LIMITED TO THE GREATER OF THE AMOUNT ACTUALLY PAID BY YOU
FOR THE SOFTWARE PRODUCT OR U.S. $5.00. PROVIDED, HOWEVER, IF
YOU HAVE ENTERED INTO A POLYCOM SUPPORT SERVICES
AGREEMENT, POLYCOM'S ENTIRE LIABILITY REGARDING SUPPORT
SERVICES SHALL BE GOVERNED BY THE TERMS OF THAT AGREEMENT.
8. DISCLAIMER.
Some countries, states, or provinces do not allow the exclusion or limitation of
implied warranties or the limitation of incidental or consequential damages for
certain products supplied to consumers, or the limitation of liability for
personal injury, so the above limitations and exclusions may be limited in their
application to you. When the implied warranties are not allowed to be excluded
in their entirety, they will be limited to the duration of the applicable written
warranty. This warranty gives you specific legal rights which may vary
depending on local law.
9. EXPORT CONTROLS.
The SOFTWARE PRODUCT may not be downloaded or otherwise exported or
re-exported (i) into (or to a national or resident of) Cuba, Iraq, Libya, North
Korea, Yugoslavia, Iran, Syria, Republic of Serbia, or any other country to
which the U.S. has embargoed goods; or (ii) to anyone on the U.S. Treasury
Department’s list of Specially Designated Nationals or the U.S. Commerce
Department's Table of Denial Orders. By downloading or using the
SOFTWARE PRODUCT, you are agreeing to the foregoing and you are
representing and warranting that you are not located in, under the control of,
or a national or resident of any such country or on any such list. If you obtained
this SOFTWARE PRODUCT outside of the United States, you are also agreeing
that you will not export or re-export it in violation of the laws of the country in
which it was obtained.
10. MISCELLANEOUS.
10.1 Governing Law. This Agreement shall be governed by the laws of the State
of California as such laws are applied to agreements entered into and to be
performed entirely within California between California residents, and by the
laws of the United States. The United Nations Convention on Contracts for the
International Sale of Goods (1980) is hereby excluded in its entirety from
application to this Agreement.
10.2 General. This Agreement represents the complete agreement concerning
this license and may amended only by a writing executed by both parties. If any
provision of this Agreement is held to be unenforceable, such provision shall be
reformed only to the extent necessary to make it enforceable.
10.3 Contact. If you have any questions concerning this Agreement, or if you
desire to contact POLYCOM for any reason, please contact the POLYCOM
office serving your country.
Polycom, Inc.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Polycom Kirk 5020-5040 User Guide
Information
— 10.4 U.S. Government Restricted Rights. The SOFTWARE PRODUCT
and documentation are provided with RESTRICTED RIGHTS. The
SOFTWARE PRODUCT programs and documentation are deemed to
be "commercial computer software" and "commercial computer
software documentation", respectively, pursuant to DFAR Section
227.7202 and FAR 12.212(b), as applicable. Any use, modification,
reproduction, release, performance, display or disclosure of the
SOFTWARE PRODUCT programs and/or documentation by the U.S.
Government or any of its agencies shall be governed solely by the terms
of this Agreement and shall be prohibited except to the extent expressly
permitted by the terms of this Agreement. Any technical data provided
that is not covered by the above provisions is deemed to be "technical
data-commercial items” pursuant to DFAR Section 227.7015(a). Any
use, modification, reproduction, release, performance, display or
disclosure of such technical data shall be governed by the terms of
DFAR Section 227.7015(b).
86
Polycom,Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
©2010 Polycom, Inc. All rights reserved.
Specifications subject to change without notice.
Polycom Headquarters
4750 Willow Road
Pleasanton
CA 94588 (T)
Polycom (Denmark)
Langmarksvej 34
DK-8700 Horsens
Tel. +45 7560 2850
Fax +45 7560 2851
14158600-HD ED7
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|