19” HD-Ready LCD TV/DVD Combo
FXM-1911C
20060331
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
CAUTION: Laser radiation when open. Do not stare into
beam.
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
POWER SUPPLY:
Connect the supplied adapter to the side of the DVD player in the slot marked “Power In”. Plug the
two-prong end of the power cord to an AC100-240V outlet. If you have difficulty inserting the plug,
turn it over and reinsert it, if the unit will not be used for a long time, disconnect the plug from the
outlet.
NOTE:
Before plugging the power cord into an AC outlet, make sure that all the connections have
been made.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce
the risk of electric shock, do not perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
Refer to service manual for servicing instructions.
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. DANGER: Visible laser radiation when open and interlock
failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the unit. Leave all servicing to
qualified service personnel.
Note:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Maintain well ventilated conditions around the product.
Do not put product on bed, sofa or anything that blocks ventilation. Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such
as vases, shall be placed on the apparatus.
Note: Do not touch the color TFT LCD screen by hand directly.
Copyright Protection
This product incorporates copyright protection technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or disassembly is prohibited.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Features
This product incorporates a DVD player, LCD display and TV receiver in one system.
Multiple Modes
DVD mode
Auto TV Searching Function
Can be connected to the TV antenna, support
Auto and manual TV programs searching
function.
Component mode
VGA mode
TV mode
COMPOSITE mode
S-VIDEO mode
Advanced Playing Features
High Quality Property
Compatibility
High Resolution
DVD, CD, CD-R, CD-RW and JPEG
compatible.
Adopt an MPEG2 decoding format to achieve
horizontal resolution more than 500 lines.
Zoom Function
LCD (Liquid Crystal Display)
Enlarge the picture to enhance your
enjoyment.
Designed with 19" color TFT liquid crystal
display clearly shows the data.
All Playback Functions
Stereo amplifier
Fast forward and reverse, slow playback and
repeat playback.
Built-in 2x5w speakers provide high quality
sound.
Special playback.
AV and VGA Input
Support multi-angle, multi-language and
multi-subtitle playback.
Can be connected to external audio and video
signal source and PC.
Special Function
NOTE: It is normal for a TFT screen to
experience some light or dark spots appearing
on the LCD screen.
Supports sleep time setting, V-Chip and CCD
function.
Multi-audio and Multi-video modes
Support multi-audio and multi-video modes,
provide more selecting.
USB and CARD PORTS
Designed with USB and SD/MS/MMC card
port, can be connected to USB device or
SD/MS/MMC Card.
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Information
Discs Formats Supported By This Player
DISC LOGO
CONTENTS
SIZE
MAXIMUM TIME
133min(SS-SL)
242min(SS-DL)
266min(DS-SL)
484min(DS-DL)
Audio+Video
DVD
12cm
(active picture)
CD
Audio
12cm
12cm
74min
JPEG
Still high resolution
z
z
The operating method of some DVD discs is specified by the software maker. Please refer to
the instruction manual of the disc.
The DVD Player will play most recordable (CD-R) or erasable (CD-RW) CDs, but playback of
CD-R or CD-RW discs created on a computer requires proper formatting and finalization of the
disc for audio playback. Some computers and/or software programs may not be capable of
creating compatible discs.
About Disc Terms
Title
Generally, pictures or music compressed on a DVD are divided into several sections, “title”.
Chapter
The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of
one or more chapters and each of them is numbered for easy searching. But some discs may not
have a recording chapter.
Track
A segment of picture or music on a CD. Each track is numbered for searching.
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
1. 19" color TFT screen
19" color TFT screen clearly show your images.
2. SOURCE button
Press to select the modes: DVD, Component, VGA, TV, COMPOSITE or S-VIDEO.
3. MENU button
Press to enter or exit setup menu.
4. CH▲/▼ button
In the TV mode, press to select channels.
In setup menu, the same function as ▲/▼ direction buttons.
5. VOL▲/▼ button
In the TV mode, press to decrease or increase the volume.
In setup menu, the same function as ◄/► direction buttons.
In setup menu, the VOL▲ has the same function as ENTER button.
6. ꢀPLAY button
Press to play the disc in DVD mode.
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel (Continued)
7. ■ STOP button
Press to stop playback, then press the PLAY button to resume normal playback in DVD mode.
Press the STOP button twice to stop playback completely.
8. Eject button
Press to eject the disc out.
9. Power button
Press to enter or exit the standby mode.
10. SD/MS/MMC Card Port
Insert the SD, MS or MMC card into the port.
11. Disc Tray Slot
Used to load disc into the unit.
12. Earphone Jack
When connected to earphone, the internal speakers will automatically turn off.
13. USB Connecting Port
Connecting to the USB device.
14. Remote Sensor
Remote sensor window for the remote control.
15. Power Indicator
In normal playback status, it is blue; in standby mode, it turns red.
16. Speakers
Two speakers output high quality stereo sound.
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
1. Y/Pb/Pr Input Jack (Component)
Connected to the Y/Pb/Pr input in
Component mode.
modes.
5. TV Signal Input Jack (RF)
Connected for the external NTSC TV
signal input.
2. L/R Audio Input Jack
Connected to the L/R audio input in
Component mode.
6. DC 12V In Jack
Connected to power adapter.
7. VGA Input Jack
3. AV Output Jacks
Connected to the external AV input device.
4. AV and S-Video Input Jacks
In the S-VIDEO mode, connected to
S-VIDEO signal input.
Connected to the VGA output jack on a
personal computer.
8. PC AUDIO Input Jack
Connected to the PC audio output jack.
In the COMPOSITE mode, connected to
the external video signal input.
The L/R audio input jacks can be used in
the both S-VIDEO and COMPOSITE
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Preparation of Remote Control
Softly push the back cover to open the battery
compartment.
Using the Remote control
Point the remote control unit from no more than
about 7m from the remote control sensor and
within about 60 degrees of the front of the unit.
Insert two batteries (1.5V, size AAA), please
make sure the polarity matches the marks
inside the compartment.
Softly press the back cover to close it.
•
The operating distance may vary
depending to the brightness around.
Notes:
•
•
•
Do not point bright lights directly at the
remote control sensor.
z
z
Under normal use the battery will last for
six months.
Do not place objects between the remote
control unit and the remote control sensor.
Do not use this remote control unit while
simultaneously operating the remote
control unit of any other equipment.
Take out battery when the remote is not in
use for a long time.
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Basic Operation
1. POWER button
Press to enter or exit the standby mode.
2. 0~9 Number buttons
Press to select numbers.
3.
LAST button
In the TV mode, press to return to the
channel last viewed.
4. MTS button
Press to activate MTS function in TV
mode.
5. VOL +/- button
Press to increase or decrease the volume.
6. CCD button
In the TV or COMPOSITE mode, press to
display the closed captions or cancel
display.
7. EXIT button
Press to exit the setup menu.
8. Direction buttons (▲▼◄►)
In the setup menu, press the ▲▼button to
select the desired item and press the ◄►
button to adjust or set.
9. ENTER button
Press to confirm your selection.
10. INFO button
Press to display the information about
current status on the screen.
11. +10/
button
In DVD mode, press to select number
greater than 10.
In TV mode, when select the 1~99
channel, press this button to confirm and
enter the selected channel.
12. Aspect button
Press to select screen aspect ratio.
13. CH ꢁ/ꢂ button
In TV mode, press to select channel.
14. MUTE button
Press to turn on or off the speaker output.
15. SOURCE button
Press to select the mode DVD,
Component, VGA, TV, COMPOSITE or
S-VIDEO.
16. MENU button
Press to enter the LCD setup menu.
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
8. TITLE button
For DVD Operation
When a DVD disc is playing, press to go to
title menu if the disc contains.
9. MENU button (in DVD mode)
Press to enter the disc menu in DVD
mode.
10. REPEAT button
Press to repeat a chapter, track, title or all
content in DVD mode.
11. ANGLE button
Press to select various camera angles (if
the DVD disc contains multiple camera
angles).
12. A-B button
Press to mark a segment to repeat
between A and B during DVD disc
playback.
13. AUDIO button
Press to select different audio languages
during a multiple audio language DVD disc
playback in DVD mode.
14. Eject button
Press to eject the disc out.
15. ꢅSTOP button
Press to stop playback in DVD mode.
16. ꢆNEXT button
Press the ꢆNEXT to skip to the next
chapter/track for some discs in DVD
mode.
17. ꢇPREV buttons
Press the ꢇPREV to skip to the previous
chapter/track for some discs in DVD
mode.
1. ꢀPLAY button
Press to play the disc in DVD mode.
2. PAUSE button
18. CARD button
Press to shift to USB or CARD mode when
there is the input source.
19. SETUP button(in DVD mode)
Press to enter the DVD setup menu in
DVD mode.
In DVD mode, press to pause the
playback or start step-by-step playback.
Then press the PLAY button to resume
normal playback.
3. ꢃFB button
20. SLOW button
Press the ꢃFB to search backward in
DVD mode.
4. ꢄFF buttons
Press the ꢄFF to search forward in DVD
mode.
5. 0~9 Number buttons
Press to active slow playback function in
DVD mode.
21. ZOOM button
Press to zoom in or out the picture in DVD
mode.
22. GOTO button
Press to access or exit the time-searching
mode under DVD mode.
23. SUBTITLE button
Press to select numbers.
6. Direction buttons (▲▼◄►)
In the setup menu, press the ▲▼button to
select the desired item and press the ◄►
button to adjust or set.
Press to select different subtitle
languages during a multiple language DVD
disc playback in DVD mode.
7. ENTER button
Press to confirm your selection.
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections
•
•
Do not connect the power cord to the unit until all other connections have been made.
Ensure that you observe the color cord when connecting audio and video cables.
Connecting to External AV Signal Source
Use the audio and video cable to connect the AV input jacks on the rear panel of the unit to the
external AV signal source.
Use the S-VIDEO cable to connect the S-VIDEO input jack on the rear panel of the unit to the
external AV signal source.
After connection, turn on the power of the unit and the external AV signal source. Press the
SOURCE button of the remote or the unit and select COMPOSITE or S-VIDEO as the input mode.
Note: the L/R audio input jacks can be used in the both COMPOSITE and S-VIDEO modes.
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections (Continued)
Connecting to External AV Signal Source（YPbPr）
Use the audio and video cables to connect the Y/Pb/Pr input Jacks on the rear panel of the unit to
the external AV signal source.
After connection, turn on the power of the unit and external AV signal source and then press the
SOURCE of the remote or the unit and select Component as the input mode..
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections (Continued)
Connecting to External AV Device (AV Out)
The unit supports audio and video signal input function, it can be connected to the external audio
and video device.
Use the audio and video cables to connect the AV output Jacks on the rear panel of the unit to the
external AV input device.
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections (Continued)
Connecting to PC
The unit can be connected to PC (personal computer) via the VGA cable. Follow these steps and
the figure below to connect:
1. Connect one end of the VGA cable to the VGA input jack on the rear panel of the unit.
2. Connect the other end to the PC.
3. Connect one end of the audio cable to the PC audio input jack on the rear panel of the unit.
4. Connect the other end to the PC audio output jack.
5. Please set the PC’s resolution at 1024x768@60Hz
After connection, turn on the unit and the PC and then press the SOURCE button of the remote or
the unit and select VGA as the input mode.
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections (Continued)
Connecting to Earphones
This unit can be connected to an earphone for listening music privately. See the below figure for
details:
After connecting to the earphone, the internal speakers will turn off automatically.
Connecting to Power Adapter
Power is supplied through the provided appropriative power adapter, one end is connected to the
DC 12V IN jack on the rear panel of the unit, the other end to the AC100~240V wall outlet.
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections (Continued)
Connecting to TV Antenna
This unit can be connected to the TV signal input source via the TV jack on the rear panel.
After connection, turn on the power of the unit, press the SOURCE button of the remote or the unit
and select TV as the input mode.
After connecting to the antenna, you can turn on the unit. To select channels you can do the
following steps:
1. For channels 0 through 9:
Press the number buttons to select the channel, wait three seconds and it will go to the
selected channel.
Press the number button to select channel, then press the +10/ to go to the selected channel
immediately.
Press the number buttons to input 00X, it will go to the selected channel immediately.
2. For channels 10 through 99:
Press the number buttons to select channel XX, wait three seconds and it will go to the selected
channel.
Press the number buttons to select channel XX, then press the +10/ button to enter the
selected channel.
Or press the number buttons to input 0XX, it will go to the selected channel immediately.
3. For channels 100 through 100~199:
Press the number buttons to select channels XXX, and it will go to the selected channel.
NOTE: * X is the channel number.
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Setup and Operation
Preparations
1. After making your connections, press the POWER button to turn on the power. (If it is turned on,
the power indicator is blue.)
2. Press the SOURCE button to shift to TV mode. You can go on with the following operations:
Image Setting
Note: This item is only available when there is signal input.
Press the MENU button once to enter the setup
menu, as shown on the right:
In the setup menu, press the ▲▼ button to
select Image and then press the ENTER button
to enter the item. Press the ▲▼ button to
select. Press the MENU button to return to the
previous menu.
Scheme Setup
Press the ▲▼ button to select Scheme and
press the ENTER button to enter. Press the
▲▼button to select the desired item and press
the ENTER button to confirm your selection.
Press the MENU button to return to the previous
menu.
Brightness Setup
Press the ▲▼ button to
select Brightness and press
the ◄► button to adjust the
value. Press the MENU
button to return to the
previous menu.
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Setup and Operation (Continued)
Contrast Setup
Press the ▲▼ button to select Contrast and press the ◄► button to adjust the value. Press the
MENU button to return to the previous menu.
Hue Setup
Press the ▲▼ button to select Hue and press the ◄► button to adjust the value. Press the MENU
button to return to the previous menu.
Saturation Setup
Press the ▲▼ button to select Saturation and press the ◄► button to adjust the value. Press the
MENU button to return to the previous menu.
Sharpness Setup
Press the ▲▼ button to select Sharpness and press the ◄► button to adjust the value. Press the
MENU button to return to the previous menu.
Advanced Setup
Press the▲▼ button to select Advanced and press the ENTER button to enter.
In the menu, press the ▲▼ button to select the desired item and then press the ENTER button to
confirm. Press the MENU button to return to the previous menu.
Note: This item is only available in Component, DVD and VGA modes.
Audio Setting
Press the MENU button once to enter the setup
menu. Press the ▲▼ button to select Audio and
press the ENTER button to enter the menu
shown on the right.
In the Audio setup menu, press the ▲▼ button
to select the desired item and press the ENTER
button to enter. Press the MENU button to return
to the previous menu.
Volume Setup
Press the ▲▼ button to select Volume and press the ◄► button to adjust the level. Press the
MENU button to return to the previous menu.
Bass Setup
Press the ▲▼button to select Bass and press the ◄► button to adjust the level. Press the MENU
button to return to the previous menu.
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Setup and Operation (Continued)
Treble Setup
Press the ▲▼button to select Treble and press the ◄► button to adjust the level. Press the
MENU button to return to the previous menu.
Balance Setup
Press the ▲▼ button to select Balance and press the ◄► button to adjust the level. Press the
MENU button to return to the previous menu.
Sound Mode Setup
Press the ▲▼ button to select Sound Mode
and press the ENTER button to enter. Press
the ▲▼ button to select the desired item and
then press the ENTER button to confirm your
selection. Press the MENU button to return to
the previous menu.
Sleep Setting
Press the MENU button to enter the setup
menu. Press the ▲▼ button to select Sleep
and press the ENTER button to enter the menu
shown on the right.
In the Sleep setup menu, press the▲▼ button
to select 15Min, 30Min, 45Min, 60Min, 75Min,
90Min, 105Min, 120Min or Off. Press the
MENU button to return to the previous menu
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Setup and Operation (Continued)
Parental Setting
Note: The Parental Function is the same as that of V-CHIP.
Press the MENU button to enter the setup
menu. Press the ▲▼ button to select Parental
and press the ENTER button to enter the menu
shown on the right.
In the Parental setup menu, press the
ENTER button and then use the number
buttons to enter the pin. The initial pin is
1111. Then press the ENTER button to
continue and display the menu as shown
on the right.
Note: The Master password is 3308. This
password is always effective even after you
have selected your own password and
changed it.
Change PIN
Press the ▲▼ button to select Change
PIN and press the ENTER button to
enter. Use the number buttons to enter
the new pin you want and then press
the ENTER button to confirm. Then use
the number buttons to enter the new pin
again and press the ENTER button to
confirm and return to the previous
menu.
- 21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Setup and Operation (Continued)
Clear All
Press the ▲▼ button to select Clear All and press the ENTER button to enter. Press the ▲▼
button to select the desired item and then press the ENTER button to confirm your selection. Press
the MENU button to return to the previous menu.
TV Rating
Press the ▲▼ button to select TV Rating
and press the ENTER button to enter. Press
the ▲▼ button to select the desired item
and then press the ENTER button to confirm
your selection. Press the MENU button to
return to the previous menu.
Movie Rating
Press the ▲▼ button to select Movie
Rating and press the ENTER button to
enter. Press the ▲▼ button to select the
desired item and then press the ENTER
button to confirm your selection. Press the
MENU button to return to the previous
menu.
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Setup and Operation (Continued)
CA Eng Rating
Press the ▲▼ button to select CA Eng
Rating and press the ENTER button to
enter. Press the ▲▼ button to select the
desired item and then press the ENTER
button to confirm your selection. Press the
MENU button to return to the previous
menu.
CA Fr Rating
Press the ▲▼ button to select CA Fr
Rating and press the ENTER button to
enter. Press the ▲▼ button to select the
desired item and then press the ENTER
button to confirm your selection. Press the
MENU button to return to the previous
menu.
Parental Lock
Press the ▲▼ button to select Parental Lock and press the ENTER button to enter. Press the ▲▼
button to select the desired item and then press the ENTER button to confirm your selection. Press
the MENU button to return to the previous menu.
- 23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Setup and Operation (Continued)
Setup Setting
Press the MENU button once to enter the setup
menu. Press the▲▼ button to select Setup
and press the ENTER button to enter the menu
shown on the right.
In the Setup menu, press the▲▼ button to
select the desired item and press the ENTER
button to enter. Press the MENU button to
return to the previous menu.
Tuner/Channel
Press the ▲▼ button to select the
Tuner/Channel and press the ENTER
button to enter the menu as shown on the
right. Press the ▲▼ button to select the
desired item and press the ENTER button
to enter. Press the MENU button to return
to the previous menu.
Auto Scan
Press the ▲▼ button to select the Auto Scan, press the ENTER button to start auto scan. The
screen will display as below:
Auto scan will take a few minutes, when the tuning operation completes the unit will exit and
memorize the programs by sequence automatically.
During tuning, press the MENU button to exit the auto scan mode.
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Setup and Operation (Continued)
Channel System
Press the ▲▼ button to select Channel
System and press the ENTER button to
enter. Press the ▲▼ button to select the
desired item and then press the ENTER
button to confirm your selection. Press the
MENU button to return to the previous
menu.
Prog Organizer
Press the ▲▼ button to select the
Prog Organizer and press the
ENTER button to enter the menu
as shown on the right.
In the Prog Organizer setup menu,
press the ▲▼ button to select the
desired item. Press the MENU
button to return to the previous
menu.
Channel Name
Press the ▲▼ button to select the Channel Name and press the ENTER button to enter. Then
press the ▲▼button to select letters or press the number button to input numbers. Press the
MENU button to return to the previous menu.
Add Program
Press the ▲▼ button to select the Add Program and press the ENTER button to activate the skip
function which when using the CH ▲▼button to select channels under normal playback status, it
will skip the current channel. Press the MENU button to return to the previous menu.
Delete Program
Press the ▲▼ button to select the Delete Program and press the ENTER button to cancel the skip
function which when using the CH ▲▼button to select channels under normal playback status, it
will play the channels in sequence. Press the MENU button to return to the previous menu.
- 25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Setup and Operation (Continued)
Fine Tune
Press the ▲▼ button to select Fine Tune and press the ENTER button to enter. Press the ► or ◄
button to start fine tuning forward or backward. Press the MENU button to return to the previous
menu.
Language
Press the ▲▼ button to select the
Language, press the ENTER button to enter
the setup, press the ▲▼ button to select
item. Press the MENU button to return to the
previous menu.
Factory Reset
Press the ▲▼ button to select the Factory Reset, press the ENTER button to resume default
status.
CC Mode
Press the ▲▼ button to select CC Mode and
press the ENTER button to enter. Press the
▲▼ button to select the desired item and
then press the ENTER button to confirm your
selection. Press the MENU button to return to
the previous menu.
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup
Preparations
1. Connect to the power supply and turn on the unit.
2. Press the SOURCE button to select the DVD mode.
3. Press the SETUP button on the remote control to display the settings menu. The menu includes
General setup, Audio setup, Video setup, and Preference.
4. Press the ꢈꢀdirection buttons on the remote control to select a category. All the items in the
category will appear on the screen.
5. Press the SETUP button again to exit the setup.
General Setup Page
Press the SETUP button to enter the General setup menu. The screen will display as the following:
In the menu, Use the ꢁꢂ direction buttons to
select the desired item. Press the ENTER button to
enter the item. Press the ꢈ button to return.
TV Display
1. Press the ꢁꢂ direction buttons to select TV
Display.
2. Press the ENTER button to enter the setup.
3. Use the ꢁꢂ direction buttons to select items.
4. Press the ENTER button again to confirm
selection and return.
Angle Mark
1. Press the ꢁꢂ direction buttons to select
Angle Mark.
2. Press the ENTER button to enter the setup.
3. Use the ꢁꢂ direction buttons to select On or
Off.
4. Press the ENTER button again to confirm
selection and return.
- 27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup (Continued)
OSD Lang
The item is used to select the OSD language.
1. Press the ꢁꢂ direction buttons to select OSD
Lang.
2. Press the ENTER button to enter the setup.
3. Use the ꢁꢂ direction buttons to select items.
4. Press the ENTER button again to confirm
selection and return.
Screen Saver
1. Press the ꢁꢂ direction buttons to select
Screen Saver.
2. Press the ENTER button to enter the setup.
3. Use the ꢁꢂ direction buttons to select On or
Off.
4. Press the ENTER button again to confirm
selection and to return.
Last Memory
1. Press the ꢁꢂ direction buttons to select Last
Memory.
2. Press the ENTER button to enter the setup.
3. Use the ꢁꢂ direction buttons to select On or
Off.
4. Press the ENTER button again to confirm
selection and return.
Media Center
1. Press the ꢁꢂ direction buttons to select
Media Center.
2. Press the ENTER button to enter the setup.
3. Use the ꢁꢂ direction buttons to select DVD,
USB or CARD.
4. Press the ENTER button again to confirm
selection and return.
- 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup (Continued)
Audio Setup Page
Press the SETUP button to enter the General setup menu, then use the ꢈꢀdirection buttons to
select Audio Setup Page, the screen will display as the following:
In the menu, Use the ꢁꢂ direction buttons to
select the desired item. Press the ENTER button to
enter the item. Press the ꢈbutton to return.
Dolby Digital Setup
1. Press the ꢁꢂ direction buttons to select
Dolby Digital.
2. Press the ENTER button to enter the setup, the
screen will display as left:
3. In the menu, use the ꢁꢂ direction buttons to
select items.
4. Press the ENTER button to enter the setup.
Press the ꢈbutton to return.
Dual Mono
1. Press the ꢁꢂ direction buttons to select Dual
Mono.
2. Press the ENTER button to enter the setup.
3. Use the ꢁꢂ direction buttons to select items.
4. Press the ENTER button again to confirm
selection and return.
Dynamic
1. Press the ꢁꢂ direction buttons to select
Dynamic.
2. Press the ENTER button to enter the setup, the
screen will display as left:
3. Press the ENTER button to enter.
4. Use the ꢁꢂ direction buttons to adjust.
5. Press the ENTER button again to confirm
setting and return.
6. Press the ꢈbutton to return.
- 29 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup (Continued)
Hdcd Setup
In the Audio Setup Page, use the ꢁꢂ direction buttons to select Hdcd Setup, press the ENTER
button to enter the setup, the screen will display as below:
1. In the menu, press the ENTER button to enter
the setup.
2. Use the ꢁꢂ direction buttons to select items.
3. Press the ENTER button again to confirm
selection and return.
4. Press the ꢈbutton to return.
Video Setup
Press the SETUP button to enter the General setup menu, then use the ꢈꢀdirection buttons to
select Video Setup Page, the screen will display as the following:
In the menu, Use the ꢁꢂ direction buttons to
select the desired item. Press the ENTER button to
enter the item. Press the ꢈbutton to return.
Video Quality Setup
Select Quality, press the ENTER button to enter the menu as below:
1. In the menu, Use the ꢁꢂ direction buttons to
select the desired item.
2. Press the ENTER button to enter the item.
3. Press the ꢈbutton to return.
- 30 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup (Continued)
Sharpness
1. Press the ꢁꢂ direction buttons to select
Sharpness.
2. Press the ENTER button to enter the setup.
3. Use the ꢁꢂ direction buttons to select High,
Medium or Low.
4. Press the ENTER button again to confirm
selection and return.
Brightness
1. Press the ꢁꢂ direction buttons to select
Sharpness.
2. Press the ENTER button to enter the setup, the
screen will display as left:
3. Use the ꢈꢀ direction buttons to adjust the
level.
4. Press the ENTER button again to confirm
setting and return.
Contrast
1. Press the ꢁꢂ direction buttons to select
Contrast.
2. Press the ENTER button to enter the setup, the
screen will display as left:
3. Use the ꢈꢀ direction buttons to adjust the
level.
4. Press the ENTER button again to confirm
setting and return.
Preference Setup
Press the SETUP button to enter the General setup menu, then use the ꢈꢀdirection buttons to
select Preference Page, the screen will display as the following:
In the menu, Use the ꢁꢂ direction buttons to
select the desired item. Press the ENTER button to
enter the item. Press the ꢈbutton to return.
- 31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD System Setup (Continued)
Audio
1. Press the ꢁꢂ direction buttons to select
Audio.
2. Press the ENTER button to enter the setup,
see the left figure:
3. Press the ꢁꢂ direction buttons to select audio
language.
4. Press the ENTER button again to confirm
setting and return.
Subtitle
1. Press the ꢁꢂ direction buttons to select
Subtitle.
2. Press the ENTER button to enter the setup,
see the left figure:
3. Press the ꢁꢂ direction buttons to select
Subtitle language.
4. Press the ENTER button again to confirm
setting and return.
Disc Menu
1. Press the ꢁꢂ direction buttons to select Disc
Menu.
2. Press the ENTER button to enter the setup,
see the left figure:
3. Press the ꢁꢂ direction buttons to select Menu
language.
4. Press the ENTER button again to confirm
setting and return.
Default
1. Press the ꢁꢂ direction buttons to select
Default.
2. Press the ENTER button, all the settings will
return to the default status.
- 32 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback Operation
Preparation：After making all your connections turn on the unit and select the relevant video input
before playback.
Disc Loading Steps:
1. Press the POWER button to turn on the power. Press the SOURCE button to shift to DVD
mode.
2. Please handle the disc with its printed side outward vertically to the disc tray. (Referring to the
below picture.)
3. Slightly put the disc into the disc tray.
4. As disc is automatically taken in the disc tray fully, the player will search a disc and play it
automatically in DVD mode.
Warning: Do not play poor quality discs as this may damage the player’s lens.
DVD Playback
Region Code
DVD players and discs are coded by region. These regional codes must match the played discs. If
the codes don’t match, the disc cannot be played. This player’s default code is region 1.
Play
Press the PLAY button to start playback. Press the STOP button once on the remote control to stop
playback, and press the PLAY button again to resume playback.
- 33 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback Operation (Continued)
Stop
Press the ■ STOP button once to stop playback and then press PLAY button to resume. Press this
button twice to stop playback completely.
Pause
Press the PAUSE button once to pause the playback, press it repeatedly to start frame-by-frame
playback, press theꢀ PLAY button to resume normal playback.
Previous ꢇand Next ꢆ
Press the ꢆ button to go to the next chapter or track. Press the ꢇ button once to return to the
beginning of the current chapter or track, press it twice to go to the previous chapter or track.
Fast Playback
Press the ꢃ orꢄ FWD/REV SCAN button on the remote control to activate fast backward or
forward playback.
SLOW
During DVD disc playback, press the SLOW button on the remote control to start slow playback.
During slow playback, press the PLAY button to resume normal playback.
Repeat
Use the REPEAT button repeatedly to repeat a chapter, title or all.
◆
Some discs do not support the repeat function.
A-B Repeat
During DVD disc playback, press the A-B button to select the segment that you want to play
repeatedly.
Press the A-B button first timeonce to set the beginning point “A”, press the A-B button again to set
the ending point “B” and it will play the segment repeatedly. Press the A-B button third time to
cancel the repeat segment.
Menu
Normally there is a selecting menu for DVD discs. You can press the red MENU button to enter the
menu, and use the direction buttons to highlight an item. Press the ENTER button to confirm.
Title & Chapter
Normally there are several titles in a DVD disc, and several chapters (sections) in a title. You can
select any title or chapter quickly by entering the relevant number.
Zoom in or out
During DVD disc playback, press the ZOOM button to display the image as 2X－3X－4X－1/2－1/3
－1/4－normal size in sequence. When zooming in the picture, you can use the direction buttons to
move the picture.
- 34 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback Operation (Continued)
Language (Audio)
There can be up to 8 audio languages on a DVD disc. When you play a multi-language DVD disc
you can press the AUDIO button on the remote control to select a language.
Subtitle
The DVD player can support multiple kinds of subtitles. When you play a multi-subtitle disc you can
press the SUBTITLE button on the remote control to select different subtitles.
GOTO
During DVD disc playback, press the GOTO button on the remote control once, there will be a
menu displayed on the screen. You can set or select items for your preference. Use the ꢁꢂ
direction buttons to select items, press the ENTER button to enter and use the ꢁꢂ direction
buttons to select the desired item. Press the ꢈdirection button to return. When select the
Title/Chapter, TT Time/CH Time, use number buttons to input desired title/chapter number time.
◆ Some DVD discs do not support the search function.
Various Camera Angles
The movies on some DVDs have been recorded from various camera positions. This lets you enjoy
the same scene from different perspectives. In this case you’ll usually find a marking on the DVD
sleeve.
When playing a DVD containing various camera angles the camera symbol appears on the screen.
Press the ANGLE button repeatedly until the desired perspective is shown. The picture will be
adjusted in 1～2 seconds.
CD Playback
The player will play all tracks on a CD disc by default. You can use the ꢇ and ꢆ (PREV/NEXT skip)
buttons, or number buttons to select a track.
Stop
Press the ■ STOP button once to stop playback and then press PLAY button to resume. Press this
button twice to stop playback completely.
Pause
Press the PAUSE button to pause the playback. Then press the PAUSE button again orꢀ PLAY
button to resume normal playback.
Previous and Next
Press the ꢇ button once to go the beginning of this track. Press twice repeatedly to go the previous
track.
Press the ꢆ button to play from the beginning of the next track.
- 35 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback Operation (Continued)
Fast Playback
Press the ꢃ or ꢄ FWD/REV SCAN button on the remote control to activate fast backward or
forward playback.
Repeat
Use the REPEAT button repeatedly to repeat Track, All or to cancel repeat.
◆
Some discs do not support the repeat function.
Audio
During CD playback, press the AUDIO button on the remote control to select the audio output mode:
Mono Left, Mono Right, Mix-Mono and Stereo.
GOTO
Press the GOTO button to access the time-selected state. You can select Disc Go To, Track Go To
or Select Track respectively by pressing this button repeatedly. Use the 0-9 buttons to enter the
desired time, and then the player will play according to the selected time.
JPEG Playback
JPEG is a common picture format that requires small amounts of storage per image and has low
loss in resolution. Hundreds of pictures can be stored on a disc in this format. In order to view JPEG
photo albums, you can ask your film development company to make a ”PICTURE CD” when they
develop your film.
Normal Playback
Load a JPEG disc in. For JPEG disc, there will be a root menu displayed on the screen. Use the
ENTER button and the direction button to select a submenu, and then use the ▲▼ direction button
to select the contents. Many discs have other contents besides pictures.
For Picture CD disc, it will display the pictures automatically.
During playback, press the ꢇ or ꢆ button to select picture.
◆
Many discs have other contents besides pictures.
Stop
Press the ꢅ STOP button once to stop playback and return to the preview menu. Press the ꢀ
PLAY button to resume normal playback.
Pause
Press the PAUSE button to pause playback. Press the PAUSE button again or ꢀPLAY button to
resume normal playback.
Repeat
During playback, press the REPEAT button repeatedly, and the repeat modes are Shuffle, Random,
Single, Repeat One, Repeat All and Repeat Off.
- 36 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Playback Operation (Continued)
Previous and Next
During playback, press the ꢇ or ꢆ button to select picture.
Menu
Press the MENU button once to stop playback and return to the root menu.
GOTO
During playback, press the GOTO button on the remote control once, use the number buttons to
input the file number.
Picture Rotation
This can be used only when the picture is normally displayed. Once another picture is selected,
rotation will be cancelled automatically. Use the ꢈꢀ buttons to rotate the picture.
Zoom and Move of Picture
During playback, press the ZOOM button to activate the zoom function, press the ꢃ/ꢄ button to
cycle through the zoom proportions. When zooming in the picture, you can use the direction buttons
to move the picture.
◆
Some JPEG disc may not support rotating function.
- 37 -
Download from Www.Somanuals.com. All Manuals Search And Download.
USB and SD/MS/MMC Card Function
USB and SD/MS/MMC Card Function
Preparation:
1. Connect the unit to the power supply.
2. Press the POWER to turn on the unit.
3. Press the SOURCE button to shift to DVD mode.
4. Insert the USB into the unit’s USB slot, or insert the SD/MS/MMC card into the SD/MS/MMC
card slot on the right side of the unit. Please see the below figure:
¾
Make sure that files are stored in the USB and the SD/MS/MMC card before the connection.
5. Press the CARD button to shift among disc playback, USB playback and the SD/MS/MMC
playback. The default state is disk playback. Please see the below figure:
00:00 00:00
001/002
BAK
JPEG
6. Press the ꢁ,ꢂbutton to select the folder, and press ENTER button to enter.
7. Press the ꢁ andꢂbuttons to select the desired track. Then press PLAYꢀ button to start
playback.
8. Press STOPꢅ button to stop playback: if the STOPꢅ button is pressed, the playback will start
from the beginning of the current track. Press the ꢈbutton to return to the folder menu.
Note:
1. The screen display will vary from disc to disc.
2. Pull out the USB or SD/MS/MMC card directly after the files are played. The unit will be in the
state of disc playback again.
- 38 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Functions
External AV Input Function
The unit has external AV input function. It supports COMPOSITE, S-VIDEO and Component
modes. Use the audio, video and S-Video cable to connect the unit to the external AV signal source
such as recorder, vidicon, satellite receiver or game player etc. Then turn on the unit and the
external AV signal source. Press the SOURCE button to shift to the corresponding mode: S-VIDEO
or Component. Then you can go on to set up the menu in a certain mode.
Computer Screen Function
The TFT LCD screen of the unit can be used as the computer screen. Take the steps of connecting
the unit to the PC and then you can set up the menu.
You had better set the PC’s resolution at: 1440 x 900 @60Hz.
The operations of these menus in COMPOSITE, S-VIDEO, Component and VGA modes are
the same with those in the TV mode. Please refer to the introduction in “TV Function”.
Note: Some of these menus are not available in these modes.
- 39 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
SYMPTOM
CHECK ITEM
Make sure disc is loaded in.
Make sure disc is loaded correctly.
Make sure disc is not dirty or warped.
The player cannot play.
Make sure the player’s region code is the same as region code
of DVD disc.
Make sure water condensation has not occurred. If it occurs,
take out disc and leave the player on for at least one hour.
Make sure system connection is correct.
Make sure the sound setup of DVD disc is correct.
Make sure disc is not dirty or warped.
Clean or replace the disc.
There is no sound.
Make sure the speakers are not muted.
In the TV mode, set the correct sound mode.
Make sure the unit is turned on and the connections are
LCD does not display an image correct.
or is blank.
Make sure the power adapter is correctly connected.
Cannot continue to play and Make sure is not in A-B or other repeat status.
play a section repeatedly.
Make sure disc is not dirty or damaged.
Check if the connections with the external AV signal source
are correct.
There is no picture or the Correctly set the items in the picture menu.
picture moves up and down.
Check if the video type input signal is not corresponding to the
unit.
Make sure the unit is turned on and in correct video type.
Make sure there are no obstructions between the remote
control and the player.
Make sure the remote control is pointing at the player.
Make sure batteries are inserted and the polarity is correct.
Make sure battery is not weak.
The remote control does not
work.
Other Notes:
Static or other external interference may cause the player to behave abnormally. In this occurrence,
unplug the power-supply cord from the outlet and plug it in again to reset the player. If the problems
persist, then please disconnect the power and consult a qualified technician.
- 40 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TFT-LCD Resolution
TFT-LCD Screen Size
1440 x 900
19 inches
AC100～240V，50/60Hz
Power
DC 12V 5A
Power Consumption
Dimension
< 60W
494mm × 184mm × 412mm（LXWXD）
Weight
About 8.26 Kg
Ambient Temperature
10~45℃
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works.©1992 -1997 Dolby Laboratories, Inc.
All rights reserved.
"Polaroid" and “Polaroid and Pixel” are trademarks of Polaroid Corporation, Waltham, MA, USA.
in the US call 1-866-289-5168 and in Canada call 1-866-301-7922.
- 41 -
Download from Www.Somanuals.com. All Manuals Search And Download.
- 42 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Peavey Electronic Keyboard DPM SX User Manual
Pelco Car Satellite TV System LRD41A11 User Manual
Philips Juicer HR1853 User Manual
Philips Portable Radio AE6565 User Manual
Philips Stereo System SDV6122 User Manual
Pioneer DVD Player DV 300 K User Manual
Polycom Answering Machine Voicestation 100 User Manual
Porter Cable Saw PC1800AG User Manual
Prince Castle Pasta Maker 630 ROM4 User Manual
PYLE Audio Speaker PAHT4 User Manual