26” /27”/32”/37” LCD Television
KF SERIES
USER MANUAL
VOL.
VOL.
CH.
CH.
MENU
SOURCE
2006060706
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings and Precautions
Warnings and Precautions
To prevent any injuries, the following safety precautions should be observed in the installation, use,
servicing and maintenance of this equipment.
Before operating this equipment, please read this manual completely, and keep it nearby for future
reference.
This symbol is intended to alert the user to avoid the risk of electric shock.
This equipment must not be disassembled by anyone except qualified service personnel.
WARNING
This symbol is intended to alert the user to the presence of important operating and
maintenance instructions in the literature accompanying the appliance.
CAUTION
To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.
▪
▪
▪
▪
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Use of controls, adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Important Safety Instructions
This symbol indicates caution points.
This symbol indicates actions that should not be done.
This symbol indicates actions that must be performed.
▪
▪
Do not place the equipment on any uneven or unstable carts, stands, tables, shelves etc.
The equipment may fall, causing serious injury to children or adults and serious damage to
the equipment itself.
Use only a cart or stand recommended by the manufacturer. This equipment and
recommended cart or stand should be handled with care. Quick stops, excessive force, and
uneven surfaces may cause the equipment and cart/stand to overturn.
▪
Do not disable the 3-wire grounding type plug. The grounding pin on the 3-prong plug is an
important feature. Removing the grounding pin will increase the risk of damaging the
equipment.
▪
▪
▪
If you can not fit the plug into the electrical outlet, contact an electrician to install a grounding
outlet.
Always operate this equipment from the type of power source indicated on the rear of the
serial/model plate.
Never overload wall outlets and extensions.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings and Precautions
▪
▪
Use and handle the power cord with care. Do not place any heavy objects on the AC
power cord.
Do not pull the AC power cord. Do not handle the AC power cord with a wet hand.
▪
▪
Do not touch the power cord and antenna cable during lightning.
Remove the plug from the wall outlet, if the equipment will not be used for a long period
of time.
▪
▪
Do not place, use or handle this equipment near water.
Never expose the equipment to liquid, rain, or moisture.
Seek for service if any of the above is spilled into the equipment.
▪
▪
Do not expose the equipment to extreme temperature or to direct sunlight, as the
equipment may heat up and suffer damage.
Do not install the equipment near any heat sources such as radiators, heat registers,
stoves, or any other apparatus that might produce heat.
▪
▪
Do not attempt to service the equipment yourself.
Opening and removing the covers may expose you to dangerous voltage or other
hazards and may void your warranty. Refer service to qualified personnel.
▪
▪
Do not place or drop any other objects on top.
Do not insert anything into the ventilation holes of your equipment.
Inserting any metal or flammable objects may result to fire or electric shock.
▪
▪
Protect the power cord from being walked on or pinchrd particularly at plugs ,convenience
receptacles, and the point where they exit from the apparatus.
Do not place the equipment on uneven or unstable carts, stands, tables, shelves etc. The
equipment may fall, causing serious injury to children or adults and serious damage to
the equipment itself.
Always place the equipment on the floor or on a surface that is sturdy, level, stable and
strong enough to support the weight of the equipment.
▪
Do not block any ventilating openings. Leave an open space around the equipment.
Never place the equipment :
on a bed, sofa, rug, or any other similar surfaces; too close to drapes/curtains/walls, in a
bookcase, built-in cabinet, or any other similar places that may cause poor ventilation.
▪
▪
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been admaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
▪
▪
Always remove the power cord from the outlet before cleaning the equipment.
Never use liquid or aerosol cleaners on the equipment.
Clean only with a soft dry cloth.
▪
Only use attachments/accessories specified by the manufacturer.
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings and Precautions
Outdoor Antenna Safety Instructions
If an outdoor antenna is connected, follow the precautions below:
▪
▪
An outdoor antenna should not be located in any area where it could come in contact with
overhead power lines, or any other electric light or power circuits.
When installing an outdoor antenna system, extreme caution should be taken to prevent
contact with power lines. Direct contact with power lines may be fatal and should be avoided
at all costs.
Section 810 of National Electrical Code (NEC) provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for
the grounding electrode.
Antenna lead-in wire
Ground clamps
Antenna discharge unit
(NEC section 810-20)
Electric service
equipment
Grounding conductors
(NEC section 810-20)
Ground clamps
Power service grounding
(NEC Art250 part H)
NEC : National Electrical code
EXAMPLE OF OUTDOOR ANTENNA GROUNDING
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Federal Communications Commission Statement.......................... 1
Warnings and Precautions
Important Safety Instructions....................................................................................... 2
Antenna Safety Instructions......................................................................................... 4
Chapter ꢀ Introducing the LCD TV
Key Features ............................................................................................................... 6
Package Contents ....................................................................................................... 7
Setting Your LCD TV.................................................................................................... 8
Your LCD TV.............................................................................................................. 10
Your Remote Control ................................................................................................. 12
Chapter ꢁ Installing the LCD TV
Connecting a TV Cable or an Antenna ...................................................................... 14
Connecting a VCR..................................................................................................... 18
Connecting a Video Camera or Play Station ............................................................. 19
Connecting a DVD Player.......................................................................................... 20
Connecting a Digital TV Cable Box or Digital Satellite Receiver ............................... 22
Connecting an AV Equipment with HDMI Connector................................................. 23
Connecting an AV Equipment with DVI Connector.................................................... 24
Connecting a PC........................................................................................................ 25
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System........................ 26
Chapter ꢂ USING THE FEATURES
Using Picture-In-Picture...................................................................................27
Wide Screen Viewing ......................................................................................29
Operating the Menu........................................................................................30
Setting up the HDTV Function..........................................................................32
Customizing the VIDEO Settings ......................................................................35
Customizing the AUDIO Settings ......................................................................36
Customizing the SETUP Settings......................................................................37
Using the V-CHIP Settings...............................................................................39
Using the Parental Settings..............................................................................41
Customizing the TV Settings............................................................................42
Specifiction.............................................................................................................. 43
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Chapter 1
Introducing the LCD TV
Key Features
Various Audio/Video terminals for external equipment connection
▪
▪
▪
▪
▪
▪
▪
▪
2 set of composite A/V input terminals
1 set of S-VIDEO terminals
2 set of component Video input terminals
1 VGA/ Audio input terminal
1 HDMI/Auido input terminal
1 sets of Audio(L/R) output terminals
2 SPDIF output terminal (Optical x 1 /Coaxial x 1)
1 Headphone terminal
The built-in TV tuner to receive HD ATSC
▪
This function allows the reception of HD broadcasting without the addition of a set top
box.
High Definition Multimedia Interface (HDMI)
▪
High Definition Multimedia Interface (HDMI) is a small, user-friendly interconnect that
can carry up to 5 Gbps of combined video and audio in a single cable. This system
eliminates the cost, complexity and confusion of multiple cables used to connect
current A/V systems.
HDTV Component Video Inputs
▪
Offers the best video quality for DVD(480p) and digital set-top-box (HD1080i, 720p)
connections.
ꢂD Digital Noise Reduction
This function can digitally reduce image noise to provide better picture quality.
▪
Film-Mode Detection (ꢂ:ꢁ Reverse Pull Down)
▪
This function can automatically detect content derived from film and adjust the
interlacer’s frame matching to provide a more natural-looking, clearer image of the
moving picture.
PIP Function
Provides viewing of two programs simultaneously, in either picture-in-picture mode or
picture-on-picture (side by side) mode.
▪
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Package Contents
Make sure all of the following contents are included.
LCD TV
Bottom Stand /
Screw Driver and 6 Screws
VO
L
.
V
O
L
.
C
H
.
C
H
.
M
E
N
U
SOURCE
Remote Control/
VIDEO Cable
AAA Batteries x 2
POWER
P.MODE
SWAP
PIP
S.MODE
MTS
MUTE
CAPTION
SLEEP
P.SIZE
1
4
2
5
8
3
6
9
.
7
JUMP
0
AIR/CABLE
VOL.
CH.
SOURCE
GUIDE
EXIT
OK
INFO
MENU
LIST
FAV.CH
TIMER
FREEZE
Power Cord
AUDIO Cable
Warranty Card
P
l
e
a
s
e
c
a
l
l
(
1
-
8
7
7
-
5
3
2
-
8
1
7
6
)
t
o
l
o
c
a
t
e
y
o
u
r
e
n
e
a
r
e
s
t
T
1
o
o
7
b
7
t
-
a
5
i
3
n
c
2
u
s
1
t
o
7
m
e
M
r
s
o
e
n
r
d
v
a
i
c
y
e
t
a
n
u
d
F
t
r
e
i
c
d
h
a
n
y
i
8
c
:
a
0
l
0
s
u
a
p
m
p
t
o
o
r
t
6
b
y
p
h
m
one:
(
-
8
-
8
6
,
h
r
:
0
0
p
P
S
T
)
7
3
7
3
H
u
n
t
A
ve.
User’s Manual
Quick Start Guide
USER MANUAL
J
K
S
e
rie
s
These items are all you need to set up and operate the LCD TV in its basic configuration.
Most devices (VCRs, DVD player, etc.) come with the necessary cable for
connection. If you want to set up a complex system, you may need to buy extra
cable, connector, etc.
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Setting Up Your LCD TV
How to install the TV Stand
Follow the instructions below to install the TV stand:
Open the box, and make sure all necessary parts are in the box.
The package contains:
VO
L
.
V
O
L
.
C
H
.
C
H
.
M
E
N
U
SOURCE
Screw Driver
and 6 Screws
Stand
LCD TV
Cover an even stable surface with a soft cloth. Place the LCD TV unit face-down on the
cloth.
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Hold the TV stand and place it on the six screw holes on the back of the unit as shown. Use
the screwdriver to tighten the six screws on the rear of the until the screw is firmly fixed in
place.
completed
V
O
L
.
V
O
L
.
C
H
.
C
H
.
M
E
N
U
SOURCE
If you prefer to mount your LCD TV on a wall instead of attaching it to the
stand, please reference the instructions included in the wall mounting kit
(not included).
ꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal
(refer to page17).
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
Insert the 2 batteries supplied in remote control.
Stepꢀ Slide the back cover up to open the
battery compartment of the remote
control.
Stepꢁ Insert two AAA size batteries.
Make sure to match the (+) and
( - ) ends of the batteries with
the (+) and ( - ) ends indicated
in the battery compartment.
Slide the cover back into place.
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner
etc.) on the remote, as it may suffer damage.
Connect other an external A/V device (refer to page14-26).
Effective range
Your remote control can be activated from up to the LCD TV 5m away, if pointed directly
in front of the device.
V
O
L
.
V
O
L
.
C
H
.
C
H
.
M
E
N
U
SOURCE
30 O
30 O
5m
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Your LCD TV
Front/Right Side View and Controls
LED
The LED light indicates when the LCD TV is
activated.
VO
L
.
V
OL
.
C
H.
C
H.
M
E
N
U
SOURCE
IR
Infrared
Receiver
VOLUME▲▼
Adjusts the volume up and down.
Selects the main-menu item and change
values for items when in the OSD mode.
VIDEOꢀ IN
Connects to the composite
Video and Audio output jacks
VIDEO
CHANNEL▲▼
on external video equipment.
Scans up and down through channels.
Selects sub-menu item when in the OSD
mode.
L
AUDIO
R
VIDEO1 IN
MENU
Press once to display the OSD (on screen
display), press again to turn the OSD off.
EARPHONE
Connects to the external
headhone for private
listening.
SOURCE
Chooses from different input signal sources.
Turns the LCD TV on and into standby mode.
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Rear View and Jacks
VIDEOꢁ IN
Connects to the composite VIDEO and AUDIO(L/R) output jacks on external video equipment.
HDMI IN
Connects the all digital AV equipment with HDMI connector.HDMI supports enhanced,
high-definition video and two-channel digital audio. The AUDIO(L/R) of HDMI IN is for
DVI connection.
S-VIDEO IN
Connects to the S-VIDEO and AUDIO(L/R) output jacks on external
video equipment.
VGA IN
Connects the PC, or other AV equipment with VGA and
AUDIO(L/R) output jacks.
HDMI IN
VGA IN
AUDIO OUT
YPbPrꢀ IN
DIGITAL
STEREO
AUDIO
AUDIO
Y
Y
Pb
Pb
Pr
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO IN
VIDEOꢁ IN
YPbPrꢀ IN/YPbPrꢁ IN
Connects to the DVD player, Digital Set-Top-Box, or other AV
equipment with component(YPbPr) video and audio output jacks.
AUDIO OUT-STEREO
Connects to the AUDIO(L/R) input jacks on AV equipment.
AUDIO OUT-DIGITAL-OPTICAL/COAXIAL
Connects to the OPTICAL AUDIO jack on the digital/standard5.1
VHF/UHF IN-TV-CABLE
Connects RF input from VHF/UHF antenna or cable.
VHF/UHF IN-HDTV-AIR
Connects RF input from VHF/UHF antenna or cable to receive
high/standard definition television.
AC IN
Connects to the AC power cord.
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Your Remote Control
This package includes a Polaroid remote that enables control of up to four devices.
To select a device, simply select one of the following device mode controls: TV, CBL/SAT, DVD/VCR,
or AUDIO.
POWER
Turns the LCD TV on and off
ꢀ
SWAP
Swaps between the main and sub
window in PIP/POP mode
ꢁ
ꢂ
P.MODE
Selects picture mode: Vivid/Standard/
Cinema/Sport/User/High-Bright
ꢁ
ꢂ
POWER
ꢀ
ꢃ
ꢆ
ꢃ
ꢄ
PIP
Turns PIP/POP on and off
P.MODE
SWAP
PIP
ꢄ
ꢅ
MTS
Cycles through the multi-channels TV
sound(MTS) options: SAP/MONO/
STEREO
S.MODE
CAPTION
MTS
MUTE
SLEEP
P.SIZE
ꢇ
ꢈ
ꢀ0
S.MODE
MUTE
Selects sound effect options: Surround/
Live/Dance/Techno/Classic/Soft/Rock/
POP/Off
ꢅ
1
4
2
5
8
3
6
Pressing once mutes audio. Pressing
again restores audio
ꢀꢀ
ꢀꢁ
ꢆ
ꢇ
7
9
CAPTION Cycles through the Closed Caption:
OFF/CC1/CC2/CC3/CC4/TT1/TT2/TT3/
TT4/Off
JUMP
.
0
AIR/CABLE
ꢀꢂ
ꢈ
SLEEP
P.SIZE
0-ꢈ
Cycles through the LCD TV sleep time:
OFF/30/60/90/120 mins
VOL.
CH.
ꢀꢄ
ꢀꢅ
ꢀꢃ
SOURCE
Cycles through Wide mode settings :
NORMAL /FULL/WIDE/ZOOM
ꢀ0
ꢀꢀ
GUIDE
EXIT
Select and switch to a channel by using
0-9 buttons
In HDTV mode, use with 0-9 and
OK
buttons to select a digital channels
ꢀꢁ
ꢀꢂ
JUMP
Returns to previously selected channel
INFO
MENU
AIR/CABLE Cycles through the TV receiving signal:
AIR(by antenna), Cable-STD/IRC/
HRC(by cable)
ꢀꢃ VOL.+-
Increases and decreases volume
Change channel up and down
LIST
FAV.CH
TIMER
FREEZE
ꢀꢄ CH.▲▼
SOURCE Pressing SOURCE display the source
list, use ▲▼ to select the video
ꢀꢅ
equipment connected to the video inputs
of your LCD TV : TV/HDTV/VIDEO1/
VIDEO2/VIDEO3/VIDEO4/VIDEO5/
VIDEO6/COMPUTER
ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
GUIDE
EXIT
In HDTV mode, pressing GUIDE display
the Program Guide on the screen
ꢀꢆ
ꢀꢇ
ꢀꢈ
Exits the OSD menu
POWER
▲▼►◄
OK
Cycles through OSD options and
selects individual menu items. OK
confirms option settings
P.MODE
SWAP
PIP
S.MODE
CAPTION
MTS
MUTE
INFO
Pressing once displays a variety of
information such as the current channel
and the input source
ꢁ0
SLEEP
P.SIZE
ꢁꢀ
ꢁꢁ
ꢁꢂ
MENU
Displays the OSD menu on the screen
For European TV system only
1
4
2
5
8
3
6
LIST
In HDTV mode, pressing LIST display the
received channel list
7
9
TIMER
Allows to set up clock and to program the
TV to turn on and off and tune to a
specific channel
ꢁꢃ
JUMP
.
0
AIR/CABLE
VOL.
CH.
SOURCE
GUIDE
EXIT
ꢀꢆ
ꢀꢇ
ꢀꢈ
ꢁꢀ
▪
Time:
OK
Selects to set the current time by hour,
minute, second
▪
Start Time:
Selects to set the time that you want
the TV to turn on
▪ Stop Time:
Selects to set the time that you want
the TV to turn off
ꢁ0
ꢁꢁ
ꢁꢂ
INFO
MENU
ꢁꢃ
ꢁꢄ
▪
Channel:
LIST
FAV.CH
TIMER
FREEZE
Selects to set the specific channel that
you want the TV to tune
Activate:
Selects to turn on/off/once the timer
Confirm:
ꢁꢅ
▪
▪
Selects to confirm
FREEZE
FAV.CH
Pressing FREEZE to freeze the current
picture, press again to restore the
picture
ꢁꢄ
ꢁꢅ
Pressing FAV.CH display favorite
channels
Effective range:
The remote can control the LCD TV from up to ꢄm away, if pointed directly at the receiver.
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Chapter 2
Installing the LCD TV
Refer to the owner’s manual of any external equipment to be connected.
When connecting any external equipment, do not connect any AC power cords to wall outlets
until all other connections are completed.
Connecting a TV Cable or an Antenna
Antenna Connection
The antenna requirements for good color TV reception are more important than those for a black &
white TV reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connection that is provided with the various antenna
systems.
■
A ꢆꢄ-ohm system is generally a round cable (not included) with F-
type connector that can easily be attached to a terminal without
tools.
F-type connector
ꢆꢄ-ohm coaxial cable (round)
■
A ꢂ00-ohm system is a flat twin-lead cable (not included) that can
be attached to a ꢆꢄ-ohm terminal through a ꢂ00-ꢆꢄ-ohm adapter
(not included).
ꢂ00-ohm twin-lead cable (flat)
ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Use one of the following two diagrams when connecting an outdoor antenna.
A: Shows how to use a VHF/UHF combination outdoor antenna.
B: Shows how to use a separate VHF and/or UHF outdoor antenna.
A. Combination VHF/UHF antenna
VHF/UHF
Antenna
300/75-ohm adapter
(not included)
VHF/UHF
Antenna
300-ohm twin-
lead cable
75-ohm
coaxial cable
B. Separate VHF and/or UHF antennas
UHF
Antenna
Combiner
(not included)
300-ohm twin-
lead cable
IN
OUT
75-ohm
coaxial cable
VHF
Antenna
300-ohm twin-
lead cable
ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Cable TV (CATV) Connection
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the
National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the building
accurately, or as close to the point of cable entry as possible. Use of this TV for other than
private viewing of programs broadcasted on UHF, VHF or transmitted by cable companies for
the use of the general public may require authorization from the broadcast/cable company, and/
or program owner.
■
■
A ꢆꢄ-ohm coaxial cable connector is built into the set for easy hookup.
When connecting the ꢆꢄ-ohm coaxial cable to the set, connect the ꢆꢄ-
ohm cable into the ANT. terminal.
Some cable TV companies offer premium pay channels. Since the
signals of these premium pay channels are scrambled, a cable TV
converter/descrambler is generally provided to the subscriber by the
cable TV company.
This converter/descrambler is necessary for normal viewing of scrambled channels.
(Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown,
consult your cable TV company.)
For more specific instructions on installing cable TV, consult your cable TV company.
One possible method of connecting the coverter/descrambler provided by your cable TV
company is shown in the diagram below.
RF switch
(not included)
2 set signal
splitter
(not included)
A
IN
B
Cable TV Line
OUT
Cable TV converter/
descrambler
VHF/UHF IN
(not included)
■ The RF switch (not included) is required to provide two inputs (A and B). Setting
the RF switch to position A allows viewing of all unscrambled channels by using
the TV channel keys.
■
Setting the RF switch to position B allows viewing of all scrambled channels via
the converter/descrambler by using the converter channel keys.
ꢀꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
METHOD A:
Use a supplied antenna cable to connect the NTSC signal to the LCD TV’s TV CABLE
terminal.
TV
CABLE
HDTV
AIR
VHF/UHF IN
B
A
METHOD B:
Use a supplied antenna cable to connect the ATSC signal to the LCD TV’s
HDTV AIR terminal.
Connect the AC power cord at the back of the TV and connect the power cord to wall
outlet.
TV
CABLE
HDTV
AIR
VHF/UHF IN
Press the button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the main voltage when the LCD TV will
not be used for a long period of time. The POWER button on the front panel
is only used for switching the LCD TV into standby, it does not disconnect
the device from the main voltage. To completely disconnect the main
voltage, please remove the power plug from the socket.
Press the Source button on the remote to
display the Input List. Use the ▲► buttons to
Main
TV(CABLE/AIR)
HDTV (CABLE/AIR)
VIDEOꢀ (SIDE)
select TV( METHOD A), or HDTV (METHOD
B), and press the OK button.
VIDEOꢁ (REAR)
VIDEOꢂ (S-VIDEO)
VIDEOꢃ (YPbPrꢀ)
VIDEOꢄ (YPbPrꢁ)
VIDEOꢅ (HDMI)
COMPUTER (VGA)
ꢀꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Connecting a VCR
Rear of TV
HDMI IN
VGA IN
AUDIO
AUDIO OUT
YPbPrꢀ IN
DIGITAL
STEREO
AUDIO
Y
Y
Pb
Pb
Pr
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO I
VIDEOꢁ IN
AUDIO Cable
S-VIDEO Cable
AV Cable
A
B
METHOD A:
Use a composite cable to connect the VCR’s composite video/audio jacks to the LCD TV’s
VIDEO2 IN jacks.
METHOD B:
Use an audio cable to connect the VCR’s audio output jacks to the LCD TV’s audio
inputs. Use a S-Video cable to connect the VCR’s s-video output jack to the LCD TV’s
S-VIDEO IN input jack.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
To watch a videotape, press the Source button on the remote to select
VIDEOꢁ( METHOD A), or VIDEOꢂ (METHOD B).
ꢀꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Connecting a Video Camera or Play Station
Rear of TV
Right Side
HDMI IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
VIDEO
AUDIO
YPbPrꢀ IN
Pr
STEREO
AUDIO
Y
Y
Pb
Pb
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
R
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VIDEO1 IN
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO I
VIDEOꢁ IN
AUDIO Cable
or
S-VIDEO Cable
PLAY STATION
B
A
AV Cable
METHOD A:
Use a composite cable to connect the video camera’s or play station’s composite video/
audio jacks to the LCD TV’s VIDEO2 IN jacks or VIDEO1 IN jacks.
METHOD B:
Use an audio cable to connect the video camera’s or play station’s audio output jacks to
the LCD TV’s audio inputs. Use a S-Video cable to connect the video camera’s or play
station’s s-video output jack to the LCD TV’s S-VIDEO IN input jack.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
To watch a video vis camera or play station, press the Source button on the remote to
select VIDEOꢁ/VIDEOꢀ( METHOD A), or VIDEOꢂ (METHOD B).
Not all cameras have the ability to connect to a TV. Please check your video camera
user guide for compatibility.
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Connecting a DVD Player
Rear of TV
HDMI IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPrꢀ IN
STEREO
AUDIO
Y
Y
Pb
Pb
Pr
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO IN
VIDEOꢁ IN
or
Pb Pr
COMPONENT/AUDIO Cable
AUDIO Cable
S-VIDEO Cable
AV Cable
Pb Pr
A
B
C
DVD PLAYER
METHOD A:
Use a composite cable to connect the DVD player’s composite video/audio jacks to the LCD
TV’s VIDEO2 IN jacks.
METHOD B:
Use an audio cable to connect the DVD player’s audio output jacks to the LCD TV’s
audio inputs. Use a S-Video cable to connect the DVD player’s s-video output jack to the
LCD TV’s S-VIDEO IN input jack.
METHOD C:
Use a component cable to connect the DVD player’s component output jacks to the LCD TV’s
YPbPr1 IN or YPbPr2 IN input jacks.
Use an audio cable to connect the DVD player’s component audio jacks to the LCD TV’s
audio input jacks.
The component video jacks on your DVD player are sometimes labeled
YPbPr, or YCbCr. For an explanation of component video, see your DVD
player’s user guide.
ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
To watch a DVD, press the Source button on the remote to select
VIDEOꢁ( METHOD A), or VIDEOꢂ ( METHOD B), or VIDEOꢃ/VIDEOꢄ (METHOD C).
For best picture quality, if your equipment has component video output, use
a component cable instead of a composite video or S-video cable.
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Connecting a Digital TV Cable Box or Digital Satellite Receiver
Rear of TV
HDMI IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPrꢀ IN
STEREO
AUDIO
Y
Y
Pb
Pb
Pr
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO IN
VIDEOꢁ IN
or
Pb Pr
COMPONENT/AUDIO Cable
Pb Pr
Use a component cable to connect the satellite receiver’s/TV Cable Box’s component
(YPbPr1) output jacks to the LCD TV’s component input jacks.
Use an audio cable to connect the satellite receiver’s/TV Cable Box’s component audio
jacks to the LCD TV’s audio input jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
To watch programs via satellite receiver or TV Cable Box, press the Source button on
the remote to select VIDEOꢃ/VIDEOꢄ.
ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Connecting an AV Equipment with HDMI Connector
Rear of TV
HDMI IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPrꢀ IN
Pr
STEREO
AUDIO
Y
Y
Pb
Pb
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO IN
VIDEOꢁ IN
HDMI Cable
AV EQUIPMENT
Use a HDMI cable to connect the AV equipment’s HDMI output jack to the LCD TV’s HDMI IN
jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
Press the Source button on the remote to select VIDEOꢅ.
The HDMI connector provides both video and audio signals, it’s not
necessary to connect the audio cable.
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Connecting an AV Equipment with DVI Connector
Rear of TV
HDMI IN
VGA IN
AUDIO
AUDIO OUT
YPbPrꢀ IN
Pr
DIGITAL
STEREO
AUDIO
Y
Y
Pb
Pb
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO IN
VIDEOꢁ IN
AUDIO Cable
AUDIO
L
R
DVI IN
HDMI-to-DVI Cable
AV EQUIPMENT
Use a HDMI-to-DVI cable to connect the AV equipment’s DVI output jack to the LCD TV’s
HDMI IN jacks.
Use an audio cable to connect the AV equipment’s audio output jacks to LCD TV’s HDMI
AUDIO jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
Press the Source button on the remote to select VIDEOꢅ.
If the LCD TV is connected to AV equipment’s DVI connector, you will need
an HDMI-to-DVI cable or an HDMI adapter(not suplied).
ꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Connecting a PC
Rear of TV
HDMI IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPrꢀ IN
STEREO
AUDIO
Y
Y
Pb
Pb
Pr
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO IN
VIDEOꢁ IN
AUDIO Cable
VGA Cable
PC
Use a D-SUB cable to connect the PC’s D-SUB output jack to the LCD TV’s VGA input
jack. Use an audio cable to connect the PC’s audio output jacks to LCD TV’s.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
Press the Source button on the remote to select COMPUTER.
ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System
For better sound quality, you may want to play the LCD TV audio through your stereo system.
HDMI IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPrꢀ IN
Pr
STEREO
AUDIO
Y
Y
Pb
Pb
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO IN
VIDEOꢁ IN
AUDIO Cable
B
A
Audio Receiver
Audio Amplifier
Connecting to Audio Receiver:
Use an audio cable to connect the audio receiver’s audio LINE IN jacks to LCD TV’s
AUDIO OUT jacks.
Connecting to Digital ꢄ.ꢀ Sound System:
METHOD A:
Use an optical cable to connect the audio amplifier’s OPTICAL IN jacks to LCD TV’s
OPTICAL OUT jacks.
METHOD B:
Use a coaxial cable to connect the audio amplifier’s COAXIAL IN jacks to LCD TV’s
COAXIAL OUT jacks.
Note: Above mentioned function is only available under HDTV (cable/air) mode.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
ꢁꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Chapter 3
USING THE FEATURES
Using Picture-In-Picture
The PIP/POP feature allows simultaneous viewing of video from two sources (TV, VCR, DVD etc).
Only one source’s audio is played at a time; the user may select which source’s audio is heard.
Press the PIP button once to enter picture in picture mode.
Main
Sub
VO
L
.
V
O
L
.
C
H
.
C
H
.
M
E
N
U
SOURCE
▪ Press ◄ ► to toggle the audio source between the main window and
the sub window.
▪ Press the OK button to change the position of the second window.
SUB MAIN
ꢀ
ꢁ
ꢂ
ꢄ
ꢃ
▪ Press ◄ ► to activate either the main or sub window, then press the Source
button to display the Input List:
Sub
TV(CABLE/AIR)
VIDEOꢀ (SIDE)
VIDEOꢁ (REAR)
VIDEOꢂ (S-VIDEO)
VIDEOꢃ (YPbPrꢀ)
VIDEOꢄ (YPbPrꢁ)
COMPUTER (VGA)
▪ Press ▲▼ to change input source and press the OK button.
ꢁꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Press the PIP button again to view images side by side.
Main
Sub
VO
L
.
V
O
L
.
C
H
.
C
H
.
M
E
N
U
SOURCE
▪ Press ◄ ► to toggle the audio source between the main window and the sub window.
▪ Press the OK button to swap the pictures between the main and sub windows.
VO
L
.
V
O
L
.
C
H
.
C
H
.
M
E
N
U
SOURCE
▪ Press ◄ ► to activate either the main or sub window, then press the Source button to
display the Input List:
Sub
TV(CABLE/AIR)
VIDEOꢀ (SIDE)
VIDEOꢁ (REAR)
VIDEOꢂ (S-VIDEO)
VIDEOꢃ (YPbPrꢀ)
VIDEOꢄ (YPbPrꢁ)
COMPUTER (VGA)
Press ▲▼ to change input source and press the OK button.
Press the PIP button again to exit.
ꢁꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Wide Screen Viewing
Wide Screen function allows viewing of 4:3/16:9 images in wide screen mode, cycling through
the following wide screen settings. Press the P.SIZE button repeatedly to select the screen
format you want.
NORMAL
Displays at 4:3 aspect ratio.
FULL
Stretches the image vertically and
horizontally to keeps the image size
consistent in the center of the screen and
stretches the sides
WIDE
Stretches the image vertically and
horizontally to fill the screen at 1:1.85
aspect ratio.
ZOOM
Stretches the image vertically and
horizontally to fill the screen at 1:2.35
aspect ratio.
ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Operating the Menu
Press the button to turn the LCD TV on.
Press the MENU button on the remote control,the on-screen menu will appear on the
screen. Use the ◄► buttons to select your main menu option.
VIDEO MENU:
Allows you to make adjustments to your picture settings.
▪
If the signal source is VGA, the VIDEO MENU
appears as:
▪
If the signal source is TV/HDTV/VIDOE/SVIDEO/
YPbPr/HDMI, the VIDEO MENU appears as:
Picture Mode
Contrast
Vivid
ꢆꢄ
Picture Mode
Contrast
Vivid
ꢆꢄ
Brightness
ꢅꢄ
Brightness
Saturation
Hue
ꢄꢄ
Auto Setting
Phase
ꢅꢁ
ꢁ0
+ꢁꢁ
ꢃ
Manual Clock
Display Adjustment
Color Temperature
ꢀꢁꢇ
Sharpness
Color Temperature
Nature
Nature
Video
Select
Exit
Video
Select
Exit
AUDIO MENU:
Allows you to customize the audio options and effects.
▪
If the signal source is VIDOE/SVIDEO/YPbPr/
HDMI/VGA, the AUDIO MENU appears as:
▪
If the signal source is TV, the AUDIO MENU
appears as:
Bass
ꢄ0
ꢄ0
Bass
ꢄ0
ꢄ0
0
Treble
Treble
Balance
Sound Effect
MTS System
0
Balance
Sound Effect
Off
Off
Stereo
Audio
Select
Exit
Audio
Select
Exit
▪
If the signal source is HDTV, the AUDIO MENU appears as:
Bass
ꢄ0
ꢄ0
0
Treble
Balance
Sound Effect
Off
Audio
Select
Exit
ꢂꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
SETUP MENU:
Allows you to set up a variety of features: Language, Closed Caption, factory reset, V-Chip, Parental Control
sleep timer.
Language
Timer
English
ꢀꢄ
Closed Caption
off
V-Chip
Parental
Default
Setup
Select
Exit
TV MENU:
Allows you to edit and label channels.
Searching
Tuner Mode
Channel Skip
Channel Name
Cable-STD
On
TV
Select
Exit
HDTV MENU:
Allows you to set up the HDTV program function.
Audio Language
Time Zone
◄
English
►
Eastern Time
PCM
SPDIF Type
Auto Scan
Scan
Manual Scan
Channel Skip
Channel Block
Caption
Press<Enter>
Press<Enter>
Press<Enter>
Press<Enter>
HDTV
Select
Exit
Use the ▲▼ buttons to select an option of the sub-menu, and press the OK button. While in
adjustment mode, and use the ◄► buttons to change the value of the item.
Press the MENU button to exit the menu.
ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Setting up the HDTV Function
Automatically scans and stores all the TV channels
With the LCD TV connected to a television programming source, press the TV button
on the remote control.
Press the MENU button on the remote control to display the Main menu, and use
the ◄► buttons to select the HDTV.
Audio Language
Time Zone
◄
English
►
Eastern Time
PCM
SPDIF Type
Auto Scan
Scan
Manual Scan
Channel Skip
Channel Block
Caption
Press<Enter>
Press<Enter>
Press<Enter>
Press<Enter>
HDTV
Select
Exit
Press the ▼ button to select Auto Scan, and press the OK button. The Auto Scan
automatically creates a list of receivable channels. Press the MENU button at any time to
interrupt the memorization process.(the list cannot be created if interrupted)
Status: Scanning..
Channels Found: ꢁ
HDTV
Cancel
Press the OK button to display the received channel list, then press ▲▼the buttons to
select a channel. Or, use the ▪ (Source button) with 0-ꢈ buttons to select digital channel( for
example 9.1)
Channel List
ꢈ-ꢀ KQED-HD
ꢈ-ꢁ KOED-SD
The digital main channel might include many subchannels (for example
ꢈ-ꢀ, ꢈ-ꢁ..) that are showing program at the same time.
ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
The HDTV menu includes the following options:
Audio Language
Time Zone
Allows to select the audio language:
English/Spanish/French.
Allows selection of regional TV systems of USA: Eastern Time/Indiana/
Central time/Mountain Time/Arizona/Pacific Time/Alaska/Hawaii
SPDIF Type
Allows to selection of the digital sound format: PCM/OFF/Dolby Digital
Auto Scan
Automatically sets up channel list on TV for all receivable channels.
Allows to set up TV channel manually.
Manual Scan
Channel Skip
Channel Block
Allows addition/removal of digital channels.
Allows to block digital channels.
Use the Channel Block function, must enter a four-digit password. The
factory password is 0000.
Caption
Allows to set closed caption:
Analog Closed Caption
Digital Closed Caption
Caption Style
◄
OFF
OFF
►
HDTV
Select
Back
▪
▪
Analog Closed Caption:
Allows to set basic analog closed caption options:OFF/CC1/CC2/CC3/CC4
Digital Closed Caption:
Allows to set digital closed caption options:Service1/Service2/Service3/
Service4/Service5/Service6/OFF
▪
Caption Style:
Allows to customize the settings for digital closed caption option:
Caption Style
Font Size
◄
Custom
Large
►
Font Color
White
Font Opacity
Solid
Background Color
Background Opacity
Window Color
Window Opacity
Black
Solid
Black
Translucent
HDTV
Select
Back
ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Using the Program Guide
The Program Guide feature brings all sorts of information provided by the cable TV
company to your screen, such as program title, program duration, time remaining, rating
information, closed caption, availability, etc.
With the LCD TV connected to a television programming source, press the TV button on the
remote control.
Press the GUIDE button on the remote control, the Program Guide will appear on the
screen:
Monday ꢁꢈ April ꢁ00ꢄ ꢁ:ꢂꢅ:ꢁꢅ PM
ꢈ-ꢀ ◄
ꢄ:00 PM
ꢄ:ꢂ0 PM
ꢅ:00 PM
ꢆ:ꢂ0 PM
ꢆ:ꢂ0 PM
ꢀꢀ:00 PM
ꢈ-ꢁ KQED-SD
Calfornia’s Gold
Antiques Roadshow
The NewHour with Jim Lehrer
Zoboomafoo
► ꢈ-ꢀ
Today
Today
Today
Today
Today
Today
CC
CC
CC
Arthur
Antiques Roadshow
CC
ꢄ:00 PM - ꢄ:ꢂ0 PM Mon, ꢁꢈ Apr
Not Rated
Clubs: Dongwa doesn’t communicate with his parents.
Eplisode: Explorer’s club/Time for everything
ꢈ - ꢁ KOED-SD
Press the ▲▼ button to select the program from a list, the Program Guide provides
introduction about the current program being shown on each channel.
Monday ꢁꢈ April ꢁ00ꢄ ꢁ:ꢂꢅ:ꢁꢅ PM
ꢈ-ꢀ ◄
ꢄ:00 PM
ꢄ:ꢂ0 PM
ꢅ:00 PM
ꢆ:ꢂ0 PM
ꢆ:ꢂ0 PM
ꢀꢀ:00 PM
ꢈ-ꢁ KQED-SD
Calfornia’s Gold
Antiques Roadshow
The NewHour with Jim Lehrer
Zoboomafoo
► ꢈ-ꢀ
Today
Today
Today
Today
Today
Today
CC
CC
CC
Arthur
Antiques Roadshow
CC
ꢄ:00 PM - ꢄ:ꢂ0 PM Mon, ꢁꢈ Apr
Not Rated
Clubs: Dongwa doesn’t communicate with his parents.
Eplisode: Explorer’s club/Time for everything
ꢈ - ꢁ KOED-SD
Press the GUIDE button again on the remote control to exit the Program Guide
ꢂꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Customizing the VIDEO Settings
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the VIDEO.
Use the ▲▼buttons to highlight an individual VIDEO option, use the ◄► buttons to
change the setting, and press the MENU to exit the menu
Picture Mode
Contrast
Vivid
ꢆꢄ
Brightness
Saturation
Hue
ꢄꢄ
ꢅꢁ
+ꢁꢁ
ꢃ
Sharpness
Color Temperature
Nature
Video
Select
Exit
The VIDEO menu includes the following options:
Picture Mode
Contrast
Cycles among display types: Vivid/Hi-Bright/Cinema/Sport/User
Controls the difference between the brightest and darkest regions of the
picture.
Brightness
Saturation
Hue
Controls the overall brightness of the picture.
Controls the color intensity.
Controls the difference between the green and red regions of the
picture.
Sharpness
Color temperature
Increase this setting to see crisp edges in the picture; decrease it for
soft edges.
Adjusts color components independently to achieve a warm or cool
effect: Cool/Middle/Warm/User
▪ Warm: Increases red tint
▪ Nature: Increases natural tint
▪ Cool: Increases blue tint
▪ User: Allows the user to adjust red, green and blue color
component levels independently.
ꢂꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Customizing the AUDIO Settings
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the AUDIO.
Use the ▲▼buttons to highlight an individual AUDIO option, use the ◄► buttons to
change the setting, and press the MENU to exit the menu
Bass
ꢄ0
ꢄ0
Treble
Balance
Sound Effect
MTS System
0
Off
Stereo
Video
Select
Exit
The AUDIO menu includes the following options:
Bass
Controls the relative intensity of lower-pitched sounds.
Treble
Balance
Controls the relative intensity of higher pitched sounds.
Adjusts the relative volume of the speakers in a multiple speaker
system.
Sound Effect
MTS System
Allows selection of an audio-enhancement technique from among the
following options: Surround/Live/Dance/Techno/Classic/Soft/Rock/POP/
Off.
Allows you to listen to high-fidelity stereo sound while watching TV.
▪ Stereo:
Use separate audio tracks for left and right speakers, if available.
▪ SAP:
You can enjoy a second audio program from the speakers while
watching a scene in the original program.
▪ Mono:
Allows mono output (useful when stereo is noisy or inconsistent).
ꢂꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Customizing the SETUP Settings
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the SETUP.
Use the ▲▼buttons to highlight an individual SETUP option, use the ◄► buttons to
change the setting, and press the MENU to exit the menu.
Language
Timer
English
ꢀꢄ
Closed Caption
V-Chip
off
Parental
Default
Video
Select
Exit
The SETUP menu includes the following options:
Language
Timer
Selects to display all on-screen menus in your language of choice:
English/French/Spanish.
Allows to set up clock and to program the TV to turn on and off and tune
to a specific channel.
▪ Time:
Selects to set the current time by hour, minute, second.
▪ Start Time:
Selects to set the time that you want the TV to turn on.
▪ Stop Time:
Selects to set the time that you want the TV to turn off.
▪ Channel:
Selects to set the specific channel that you want the TV to tune.
▪ Activate:
Selects to turn on/off/once the timer.
▪ Confirm:
Selects to confirm.
ꢂꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Closed Caption
Allows to select from 4 closed caption modes:
▪ CCꢀ /CCꢁ /CCꢂ /CCꢃ:
Display a printed version of the dialog and sound effects of the
program being viewed.
▪ Tꢀ/Tꢁ:
Display station information presented using either half or the whole
screen.
▪ Tꢂ/Tꢃ:
Extended Data Services. For example: Network name, program
name, program length, etc.
V-Chip
Allows to setup the TV and MPAA Rating Lock options(refer to “Using the
V-CHIP Setting”).
Parental
Default
Allows to setup the Parental Lock options.
Restores factory settings.
ꢂꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Using the V-CHIP Settings
The US has 2 rating system for viewing content: Movie blocking(MPAA) and TV Blocking.
The TV Blocking conjuncts with the V-CHIP to help parents block inappropriate programs from their
children.
The Movie blocking(MPAA) is used for original movies rated by the Motion Picture Association of
America(MPAA) as broadcasted on cable TV and not edited for television.
The V-CHIP can also be set to block MPAA-rated movies.
Use the ▼ button to select the V-Chip, and press the OK to display the V-Chip menu.
Block MPAA Rating
Block TV Rating
Block MPAA Unrated
Block TV None Rating
No
No
Setup
Select
Exit
Use the V-CHIP function, must enter a four-digit password. The factory password is
0000.
Inout Your Password Please
* * * *
OK
Cancel
The MPAA includes the following options:
RATING
G
DESCRIPTION
General Audiences. Movie is appropriate for all ages.
PG
Parental Guidance Suggested. May contain material not suited for younger
viewers
PG-ꢀꢂ
R
Contains content that may not be appropriate for viewers under the age of 13.
Restricted. Contains adult content, no one under 17 admitted without parent.
No one 17 and under admitted.
NC-ꢀꢆ
X
No one 17 and under admitted.
Use the ▲▼ buttons to select the rating you want and press the OK button repeatedly to select
BLOCK() or UNBLOCK().
ꢃ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
The TV GUIDELINE has 2 rating methods: Content-Based Rating and Age-Based Rating.
The TV GUIDELINE includes the following options:
AGE-BASED
RATING
TV-Y
CONTENT-BASED
DESCRIPTION
RATING
DESCRIPTION
All children
FV
D
L
Fantasy violence
Suggestive dialogue
Strong language
Sexual situations
Violence
TV-Yꢆ
Directed to children age 7 and older
General Audience
TV-G
TV-PG
TV-ꢀꢃ
Parental Guidance suggested
Parents strongly cautioned
Mature Audience only
S
V
TV-MA
CONTENT-BASED
L
FV
D
S
V
TV-Y
TV-Yꢆ
TV-G
TV-PG
TV-ꢀꢃ
TV-MA
: To block programs by both content and age.
Use the ▲▼ buttons to select the rating you want and press the OK button repeatedly to select
BLOCK() or UNBLOCK().
The V-CHIP menu includes the following options:
Block MPAA Rating Selects to activate the MPAA Rating programs
Block TV Rating
Selects to activate the TV Rating programs.
Block MPAA Unrated ▪ YES:
Block all movies that are broadcast without a MPAA rating.
▪ NO:
Allows all movies that are broadcast without a MPAA rating
Block TV None Rating ▪ YES:
Block all movies that are broadcast without a TV rating.
▪ NO:
Allows all movies that are broadcast without a TV rating.
ꢃꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Using the Parental Settings
The Parental blocking can be set up to the TV to block a Channel or a Video Source.
Use the ▼ button to select the Parental, and press the OK to display the Parental
menu.
Channel Lock
Video Lock
ꢀ
VIDEOꢄ(YPbPrꢁ)
Change Password
Setup
Select
Exit
Use the V-CHIP function, must enter a four-digit password. The factory password is
0000.
Inout Your Password Please
* * * *
OK
Cancel
You need your password for any future access into the V-Chip and
Parental Setting,
The Parental menu includes the following options:
Channel Lock
Video Lock
Selects to block a TV channel.
Selects to block a Input source signal.
Selects to change your password.
Change Password
ꢃꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Customizing the TV Settings
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the TV.
Use the ▲▼buttons to highlight an individual TV option, use the ◄► buttons
changes the setting, and press the MENU exits the menu.
Searching
Tuner Mode
Cable-STD
On
Channel Skip
Channel Name
TV
Select
Exit
The TV menu includes the following options:
Searching
Automatically sets up channel list on TV for all receivable channels.
Tuner Mode
Allows selection between CATV cable and antenna signal sources:
▪
ANTENNA
Choose this setting if you are receiving TV channels with an antenna
cable.
▪
CABLE STD/CABLE IRC/CABLE HRC
Choose this setting if you are receiving TV channels with a CATV
cable.
Channel Skip
Allows addition/removal of channels on the channel list.
Allows channel labels to be edited.
Channel Name
ꢃꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
SPECIFICATIONS
MODEL
KF-271
KF-321
LCD Panel
Panel Size
27’’ TFT LCD
32’’ TFT LCD
Brightness
550
500
Contrast Ratio
1000:1
1000:1
Max. Resolution
1366x768
1366x768
Input Connector VIDEO/AUDIO(L/R)
S-VIDEO/AUDIO(L/R)
YPbPr/AUDIO(L/R)
VGA/AUDIO(L/R)
HDMI/AUDIO(L/R)
AUDIO OUT(L/R)
OPTICAL/COAXIAL
HEADPHONE
2
1
2
1
1
1
1
1
2
1
2
1
1
1
1
1
Power Source
AC100~240V, 50/60HZ, 2.2A AC100~240V, 50/60HZ, 2.2A
180 W, standby < 5 W 180 W, standby < 5 W
26.7 w x 22.1 h x 11.3 d inch 31.7 w x 25.0 h x 11.3d inch
33.5 LB 42.5 LB
Power Consumption
Dimension
WEIGHT
ꢃꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
MODEL
KF-371
LCD Panel
Panel Size
37’’ TFT LCD
Brightness
500
Contrast Ratio
1000:1
Max. Resolution
1366x768
Input Connector VIDEO/AUDIO(L/R)
S-VIDEO/AUDIO(L/R)
YPbPr/AUDIO(L/R)
VGA/AUDIO(L/R)
HDMI/AUDIO(L/R)
AUDIO OUT(L/R)
OPTICAL/COAXIAL
HEADPHONE
2
1
2
1
1
1
1
1
Power Source
AC100~240V, 50/60HZ, 3.0A
275 W, standby < 8 W
36.6 w x 28.2 h x 11.3d inch
62.8 LB
Power Consumption
Dimension
WEIGHT
ꢃꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
|