Plinius Audio Stereo Amplifier Odeon Power Amplifier User Manual

ODEON  
POWER AMPLIFIER  
INSTRUCTION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Introduction ...............................................................................................................2  
Design Philosophy ...............................................................................................3  
Unpacking....................................................................................................................4  
Placement & Ventilation....................................................................................4  
Care & Maintenance............................................................................................5  
Precautions ................................................................................................................6  
Front Panel Functions........................................................................................7  
Rear Panel Functions.........................................................................................8  
Installation & Operation ....................................................................................10  
Product Features ..................................................................................................13  
Loudspeaker Selection.....................................................................................15  
Troubleshooting.......................................................................................................16  
Specifications ..........................................................................................................17  
Index ................................................................................................................................18  
All operational, technical and descriptive material in this publication  
is subject to change at any time without notice. For further product  
information or queries, please contact your Plinius dealer.  
Plinius products are designed and manufactured by  
Plinius Audio Limited, New Zealand.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Congratulations on your decision to become the proud owner of this  
Plinius Odeon Power Amplifier.  
This manual has been prepared to help you understand the operation of your amplifier,  
and to provide information about its design and the variety of ways it may be used.  
We have designed and manufactured this amplifier to reproduce your favourite music  
faithfully and accurately. With a little care and a full understanding of the operating  
recommendations in this manual, your Plinius Odeon Power Amplifier will provide  
years of high-quality, trouble-free performance.  
Please take the time to read this manual thoroughly before using your amplifier.  
SERIAL NUMBER  
FINAL TEST CERTIFIED BY  
2
PLINIUS ODEON  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Design Philosophy  
From a distance you can see that the design of the Plinius products is more than  
an applied styling exercise to the front panel. We have started from the ground up  
to produce a casing for our electronics that is unrivalled in its physical strength and  
visual simplicity.  
Wherever possible we have reduced the number of parts needed and then invested  
massively in refining and producing the remaining parts to the highest quality  
achievable with state of the art computer controlled machines allied with expert  
craftsman. Examples of this approach include the hydraulically formed corners on  
the amplifiers giving much greater strength and the one piece housing for the remote  
control that looks, feels and genuinely is robust.  
As with music that you are not familiar with, truly innovative new designs can take time  
to understand and enjoy. How often have you heard music that you were first unsure  
of, that over repeated listening, has become a firm favourite?  
Our designs are fundamentally different to many other companies, and we hope that  
you will take the time to explore their unique character and qualities because we have  
not made them different simply to be different. We genuinely believe that their visual  
and tactile qualities do improve the experience of listening to music and that is our  
design goal!  
Ross Stevens  
DESIGN DIRECTOR  
MULTICHANNEL AMPLIFIER  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unpacking  
Open the box from the top and remove the accessories and polystyrene sheets.  
Once you have removed all polystyrene sheets you may now proceed to lift the unit  
from the box, You will require help with this, as this unit is very heavy. Retain the  
packaging for future transportation of this unit.  
Placement & Ventilation  
Your Odeon Power Amplifier may operate at a moderately high temperature, especially  
during extended listening sessions. The ideal location is upon a rigid stand, away  
from direct contact with any temperature sensitive materials, furniture or deep pile  
carpets. Ventilation through and around the amplifier should also be kept unimpeded.  
Please ensure that the heat vents (slots in the base and lid) are not covered or  
restricted in any way.  
The Odeon Power Amplifier design incorporates a very high level of mechanical  
decoupling of the input and output. It can however still be influenced by acoustical  
feedback in the operating environment. The use of acoustic cones or a suitably  
spiked amplifier stand or table may further enhance the performance of this amplifier.  
Consult your Plinius dealer for further advice if required.  
4
PLINIUS ODEON  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care & Maintenance  
With simple care and maintenance your Plinius product can be kept looking and  
operating like new for many years to come.  
MAINTAINING THE CONNECTORS  
Exposed connectors such as the RCA connectors will be subject to environmental  
factors, and over time the surface may degrade. This can be greatly reduced by fitting  
readily available ‘RCA caps’ to reduce the effects of environmental elements on the RCA  
connectors. These RCA caps or RCA shorting caps can also provide sonic benefits.  
Connector cleaning products are also available to clean the RCA and cable connectors  
and frequent checks and cleaning will help maintain a good signal connection.  
NOTE: DO NOT use RCA shorting caps on output connectors or power amplifier input  
connectors. Use RCA shorting caps on unused preamplifier stage input connectors only.  
Standard RCA shielding caps can be used on any unused input or output connectors.  
MAINTAINING THE SWITCHES  
Switches should be maintained by using each various switch setting periodically.  
Even if a switch or a switch setting is not used, it is a good idea to toggle small  
switches and turn rotary switches though the full range of the switch several times in  
succession to keep the contacts active. Performing this simple action will promote  
longevity of the switch contacts.  
SURFACE CLEANING  
From time to time you may wish to clean the surface of your Plinius equipment to  
remove dust, or any material build up from the atmosphere or on commonly used  
controls. Your Plinius product is made up of parts that have a hard anodised or a  
powder coat finish and will clean easily without being damaged.  
Cleaning should be carried out using a soft cleaning cloth, dry or with either a small  
amount of water or a very mild surface cleaner, while observing the following guidelines:  
˜ꢀ As a safety precaution, always switch the equipment off prior to cleaning  
˜ꢀ Always use a cloth that is soft and clean  
˜ꢀ Never use abrasives or polishing compounds anywhere on the unit  
˜ꢀ Never apply liquid directly to the surface of the unit  
˜ꢀ Use the cloth dry or with mild surface cleaners of either liquid or foaming type  
˜ꢀ Apply only small amounts of cleaner to the cloth  
˜ꢀ DO NOT rub the surface but wipe clean only. Excessive rubbing may dull powder  
coat or wear the screen printed text.  
MULTICHANNEL AMPLIFIER  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
PLEASE TAKE SPECIAL NOTE OF THE FOLLOWING PRECAUTIONS  
BEFORE OPERATING YOUR NEW AMPLIFIER.  
˜ꢀ The Plinius Odeon Power Amplifier can deliver in excess of 200 watts into 8 ohms.  
This amplifier is also capable of a very large peak current delivery.  
˜ꢀ The Plinius Odeon Power Amplifier operates in Class AB. It is capable of  
generating heat that could have an adverse effect on other electronic equipment,  
furniture, etc.  
˜ꢀ DO NOT leave flammable material on the amplifier whilst running, as this could  
pose a serious fire risk.  
˜ꢀ This amplifier operates at hazardous voltage levels. There are some alterations  
that may be made by you, the owner. However, we recommend that any work  
requiring removal of the lid be referred to a suitably qualified and experienced  
service technician.  
˜ꢀ DO NOT attempt to connect any input of this amplifier to its own outputs.  
˜ꢀ DO NOT earth any output terminal or connect any of these terminals together  
without following the instructions in this manual or seeking qualified assistance.  
˜ꢀ DO NOT place this amplifier in any position where liquids, or any foreign material  
may accidentally enter it.  
˜ꢀ DO NOT connect any voltage source, short circuit, earth/ground or appliance  
(other than suitable high fidelity loudspeakers) to the amplifier output terminals.  
6
PLINIUS ODEON  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel Functions  
The front of the Plinius Odeon Power Amplifier incorporates all the facilities you will  
require on a daily basis.  
1
2
1. DISPLAY LED  
An LED on the front panel indicates the mode of operation. When first switched on  
the unit will go into standby and the LED will vary in brightness. When the unit is taken  
out of standby the LED will flash for a short time as part of the initialisation sequence,  
then remain lit. LEDs in the lid of the Odeon will also light to show how many modules  
are fitted and operating correctly.  
2. STANDBY BUTTON  
Pressing this button toggles between operate and standby modes. On exiting standby  
the power LED will flash for a short time as part of the initialisation sequence, then  
remain lit and the incoming signal will be amplified. In standby mode the power LED  
will vary in brightness.  
MULTICHANNEL AMPLIFIER  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Panel Functions  
This panel incorporates the terminals for connecting input signals from the source, as  
well as outputs to the loudspeakers, power switch, and mains supply. Please remember  
that your Plinius Odeon Power Amplifier is a high quality electronic instrument capable  
of an exceptional level of performance. Be sure that you understand your system’s  
requirements fully before you make any connection to this amplifier.  
6
7
8
1
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
3
5
4
1. INPUT TERMINALS  
The input terminals for your Plinius Odeon Power Amplifier are easily accessible at the  
top of the channel module panels. Depending on the configuration of your amplifier  
when it was purchased, there will be up to six modules fitted, each with it’s own input  
connection/s. The Dual Amp modules have two RCA input connectors, one for each  
of the two amplifier channels on the module itself.  
˜ꢀ RCA INPUT: This standard RCA terminal is for use with unbalanced signals from  
most signal sources such as home theatre processors and stereo preamplifiers.  
˜ꢀ XLR BALANCED INPUT: XLR connectors fitted to this amplifier are for use with  
balanced line signals from audio preamplifiers. Balanced signals are carried via a  
three way cable that connects all three pins at each end of the interconnect cable.  
NOTE: Because of the way our XLR and balanced inputs are configured it is not  
possible to connect both XLR and RCA at the same time.  
2. RCA/XLR SELECTOR SWITCH (MONO MODULE ONLY)  
Each fitted module incorporates a switch that selects the input terminal to be used. It  
is possible to use different input types for each channel. Note that there should never  
8
PLINIUS ODEON  
Download from Www.Somanuals.com. All Manuals Search And Download.  
be an RCA input and XLR input connected to one module at the same time, and the  
selector switch should correspond with the input that is in use.  
3. OUTPUT TERMINALS  
Connections for the loudspeakers are provided on each module panel. A pair of five  
way binding posts are fitted – these provide ease of use with cables requiring a large  
contact area. The Dual Amp modules have two pairs of binding posts, one for each of  
the two amplifier channels on the module itself.  
4. MAINS POWER CORD IEC SOCKET  
This connector is where the mains supply cable from your wall connects to the  
amplifier. You will notice that a fuse holder is mounted within this connection, and it  
holds a mains fuse to provide surge and overload protection for your amplifier.  
5. MAINS SWITCH  
This heavy-duty rocker switch in the centre of the panel turns the Mains/Line Power  
to the amplifier ON or OFF. An LED in the centre of the front panel indicates that the  
power is on. When first switched on the unit will go into standby and the LED will  
vary in brightness. The amplifier draws a moderately high current when switched on.  
Despite the “Soft Start Circuit” within the amplifier reducing current demand on the  
mains as the amplifier is switched on, it is not good practice to rapidly turn the Mains  
switch on and off repeatedly.  
6. REMOTE TRIGGER TERMINALS  
In order to integrate more effectively into a home theatre system, the Plinius Odeon  
has remote trigger terminals fitted to the rear panel. By connecting a processor  
with a remote trigger signal to these terminals, the Odeon can be put in and out of  
standby by the processor to which it is connected. When in standby the amplifier  
draws less current and will operate at minimum temperature. The output relays are  
also open, disconnecting the loudspeakers. This may be of advantage in a multi-  
amplifier and/or remote installations. Polarity of the connections to the remote trigger  
is not important.  
7. LED BRIGHTNESS ADJUST  
This small variable resistor can be adjusted from the rear panel, which will alter the  
brightness of all external blue LEDs at the same time.  
8. GROUND LIFT SWITCH  
This switch is located to the top right of the rear panel, and allows the signal ground  
to be disconnected from the chassis. In some installations a hum loop may exist due  
to duplicate ground paths from different equipment. Use this switch to remove the  
connection from 0V to ground thus allowing some flexibility in your particular set-up.  
MULTICHANNEL AMPLIFIER  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation & Operation  
WARNING: RISK OF ELECTRIC SHOCK  
This amplifier operates at hazardous voltage levels. We recommend that any work  
requiring removal of the lid be referred to a suitably qualified and experienced service  
technician. DO NOT place this amplifier in any position where liquids or any foreign  
material may accidentally enter it.  
PLEASE READ & UNDERSTAND THE PRECAUTIONS WITHIN THIS MANUAL  
FOR PLACEMENT & OPERATION OF THIS PRODUCT.  
CONNECTIONS  
Connections to your Odeon Power Amplifier should be made in the same order as  
they are listed in this section. DO NOT attempt to connect your Odeon Power Amplifier  
until you have read and fully understood these instructions.  
Although these instructions refer to the connection of a Processor, the Odeon can also  
be safely installed into multimedia systems by following the same installation guidelines.  
Should you require any further assistance, please contact your Plinius dealer.  
DO NOT POWER UP YOUR AMPLIFIER UNTIL YOU HAVE CONNECTED  
YOUR INPUT/OUTPUTS CORRECTLY FOR YOUR SYSTEM.  
Note: Module 3 and Module 4 have the shortest ground return paths and will give the  
best audio performance. It is recommended that these be used for front left and  
right. Any fitted stereo modules should be used as rear channels.  
PREAMPLIFER/PROCESSOR INPUTS  
Connect your preamplifier or processor to the input of the Plinius Odeon using suitable  
single-ended RCA or Balanced XLR interconnect cables only. If using single-ended RCA  
inputs, connect your Preamplifier to the RCA inputs on the back of the Plinius Odeon.  
Make sure the RCA connectors are a snug fit and are inserted all the way in. For XLR  
input connection, make sure the connectors are inserted all the way and latch into place.  
NOTE: DO NOT connect XLR and RCA at the same time, use only one or the other.  
PLINIUS PREAMPLIFIER  
ODEON INPUTS  
10  
PLINIUS ODEON  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOUDSPEAKER OUTPUTS  
The connection of your loudspeakers to the output posts of the Plinius Odeon must  
be made by an ‘instructed person’ or by ready made loudspeaker cables only.  
Connect the loudspeakers to the output terminals, making note of which input is  
connected to the module. For example the module with left front input signal should  
have the left front speaker connected. Repeat so each module has the appropriate  
speaker connected in relation to the input signal, ensuring that the red positive (+)  
terminal is connected to the red terminal on your loudspeaker. Do the same with the  
black or negative (-) terminals.  
CHANNEL SPEAKER  
OUTPUTS  
CHANNEL SPEAKER  
TERMINATION QUALITY  
Quality of the connections must be examined to ensure that high performance  
trouble free operation is enjoyed. Check that the connections are tight but do not  
over tighten. If bare wires are used make sure that no loose strands of wire short  
cross the other terminals or the amplifier chassis. When using plugs such as  
bananas, be sure to use good quality plugs with a firm fit.  
PHASING (OR POLARITY)  
It is important to achieve good stereo imaging in your listening room. By observing  
the wiring instructions above, each Power Amplifier/loudspeaker combination should  
be in phase. If you experience poor stereo image and/or a lack of bass, check that  
the loudspeaker wiring has been connected correctly. We recommend that you use  
one of the easily obtainable ‘test discs’ to help you ensure both phasing and channel  
orientation are correct. If in doubt, consult your Plinius dealer for advice.  
To achieve a sound performance that is correctly aligned to your room, make sure all  
of the leads carrying signals for the right channel loudspeaker are connected to the  
right input to the amplifier from your preamplifier or cd player etc. Signals for the left  
channel should be wired in a similar fashion.  
CONNECTING THE MAINS SUPPLY  
Firstly, check that the mains supply voltage printed on the rear of this amplifier is similar  
to the mains supply voltage in your area. If in doubt, please consult your Plinius dealer.  
Mains supply power connection is via the plug-in lead supplied with your Plinius Odeon.  
MULTICHANNEL AMPLIFIER  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Where possible, check the wall outlet is switched OFF, then connect the local mains  
plug end of the lead to the wall outlet. Check the Odeon is switched OFF, and  
connect the IEC end of the cable to the IEC socket at the back of the Odeon. With the  
cord fully connected, switch the wall outlet ON.  
Now that your Plinius Odeon is configured correctly, switch the power switch on the rear  
panel to ON. The display LED will cycle in brightness to indicate the unit is in Standby  
mode. Use the STANDBY switch on the front panel to take the unit out of standby and  
you can now enjoy your new Plinius Odeon Power Amplifier.  
NOTE: This unit must be connected to a mains socket outlet with a protective earthing  
connection. The wall outlet socket or Odeon mains switch must be accessible at all  
times in case of emergency.  
WARM-UP PERIOD  
You will find that the Plinius Odeon will become noticeably ‘purer’ in sound after being  
on for a period of time. We usually recommend waiting at least 24 hours before  
expecting the best quality of sound reproduction from your amplifier. We suggest  
leaving the unit turned on so that it will always be at it’s sonic best.  
12  
PLINIUS ODEON  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Features  
ERROR DETECTION  
The Plinius Odeon Power Amplifier has in-built error detection. This will function under  
the following conditions:  
˜ꢀ When the amplifier is overdriven/clipped  
˜ꢀ If any internal fuse is damaged.  
Should either of these circumstances arise the amplifier will disconnect the output of  
the channel/s that have an error condition. This condition will remain until the input  
signal level is reduced or the damaged fuse replaced. Whenever error detection is  
triggered, the power LED and the lid LED of the module that is going into error will  
flash on and off.  
FUSE PROTECTION  
When any rail fuse is damaged one or more fuse warning LEDs will light. These LEDs  
can be seen through the lid and are located next to the fuse that has blown. Should  
any of the internal fuses need to be replaced, ensure that the amplifier is switched  
OFF and disconnected from the mains supply. The lid of the amplifier will then need  
to be removed and the fuses located. Replace them with the same type only.  
IMPORTANT: DO NOT FIT A FUSE WITH A HIGHER RATING.  
NOTE: Fuse failure may indicate a severe problem. Check all speakers and speaker  
cables for damage etc. Should the amplifier continue to exhibit rail fuse failure  
contact your Plinius dealer.  
LED BRIGHTNESS CONTROL  
Your Plinius Odeon has an LED brightness control that will adjust all lid and front  
panel LEDs. A small flat bladed screwdriver can be used to adjust the brightness.  
The LED brightness control is a small multi turn potentiometer and is located on the  
rear panel of the amplifier next to the remote trigger terminals.  
TEMPERATURE MONITORING  
The Plinius Odeon Amplifier has temperature-monitoring circuitry. When the amplifier  
reaches a predetermined internal temperature of 45°C (113°F) due to inadequate  
ventilation, the amplifier will be shut down until the temperature returns to normal.  
When the temperature has exceeded the set point, the power LED will flash four times  
in quick succession, pause then repeat. If over-temperature shutdown is occurring  
frequently, check whether ventilation around the amplifier is adequate.  
MULTICHANNEL AMPLIFIER  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINS/LINE FUSE  
A Mains/Line fuse is fitted within the IEC Mains/Line socket on the rear of the amplifier.  
A small drawer at the bottom of this socket may be removed (after the IEC plug is  
removed) by levering it out with a flat blade screwdriver. The fuse fitted should be  
rated as specified on the rear panel. In the unusual event that this fuse should blow,  
you must first establish the cause of this failure (such as power surges, damaged  
mains cable etc.) before replacing the fuse with one of the same rating and type.  
IMPORTANT: DO NOT FIT A FUSE WITH A HIGHER RATING.  
NOTE: Fuse failure may indicate a severe problem. Should the amplifier continue to  
exhibit mains fuse failure contact your Plinius dealer.  
14  
PLINIUS ODEON  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loudspeaker Selection  
Your Plinius Odeon Power Amplifier is designed for use with high fidelity loudspeakers.  
It should not be used to operate with any other type of appliance or equipment.  
Be certain that your loudspeakers can handle most of the rated output power of this  
amplifier. You may find loudspeaker specifications confusing or misleading, so you  
should discuss this with your audio dealer prior to purchase. As a general rule, the  
use of high power (200 Watt RMS or greater) loudspeakers is recommended and  
desirable. However, our experience indicates that medium to low power loudspeakers  
(100 to 200 Watt RMS) are quite often suitable for use on this amplifier, provided the  
volume is maintained at a level where no distortion is audible.  
Impedance of the loudspeaker load is important to ensure the rated performance of  
this amplifier. Any combination of loudspeakers may be used, but the total average  
impedance load for each channel should be within a range of 4 to 8 ohms. Again,  
if you have doubts about the impedance of your loudspeaker configuration, we  
recommend you speak to your Plinius dealer.  
MULTICHANNEL AMPLIFIER  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
NO SOUND FROM THE UNIT  
If the unit is not reproducing audio take the following steps:  
˜ꢀ Check the preamplifier/processor is correctly connected to an appropriate input  
on the unit. Refer to the Installation & Operation section on page 10.  
˜ꢀ Check the source is playing, and not paused or muted. If it has adjustable  
volume, check this is at the usual output level.  
˜ꢀ Check the preamplifier/processor is set to select the correct source input. Adjust  
the source selector for the correct source component.  
˜ꢀ Check the volume. Turn the unit volume up to a point just below the normal  
listening level. DO NOT turn the volume up to maximum in case the sound begins  
to come through the speakers.  
˜ꢀ Check the unit is not in Standby. If the Display LED is varying in brightness, this  
indicates the unit is in Standby mode. The Display LED should be full brightness  
for operational mode.  
SOUND IS QUIET OR DISTORTED  
If the sound is quiet or distorted a rail fuse may have failed. While the unit is ON  
check the fuses in the rear panel. A Red LED being on will indicate a fuse failure. If the  
fuse has failed, see Fuse Protection in the Product Features section of this manual.  
NOTE: If the unit immediately or repeatedly suffers rail fuse failure, there may be a  
major problem and you should contact your Plinius dealer.  
POWER FAILURE  
The unit may have suffered mains fuse failure or be in thermal overload protection mode.  
˜ꢀ Mains Fuse Failure: Check the mains fuse and replace if needed.  
˜ꢀ Thermal Overload Protection: Assess the temperature of the unit. If the unit seems  
excessively hot, the Over Temperature Protection may have activated.  
Refer to the Product Features section on page 13 for further information.  
NOTE: If the unit immediately or repeatedly suffers mains fuse failure or thermal overload  
protection, there may be a major problem and you should contact your Plinius dealer.  
16  
PLINIUS ODEON  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
POWER  
200 watts RMS per module into 8 ohms.  
300 watts RMS per module into 4 ohms.  
Each module driven from 20Hz to 20kHz at  
less than 0.2% total harmonic distortion.  
(6 modules fitted and driven.)  
FREQUENCY RESPONSE  
20Hz to 20kHz +/–0.2dB  
–0.3dB at 5Hz and –0.3dB at 70kHz  
DISTORTION  
Typically >0.05% THD at rated power. 0.2%  
THD and IM worst case prior to clipping  
CURRENT OUTPUT  
40A short duration per module  
Fuse protected  
RISE TIME  
Typically 4µs  
SLEW RATE  
50V/µs  
HUM & NOISE  
90dB below rated output 20Hz to 20kHz  
unweighted  
GAIN  
RCA inputs: 32dB  
Balanced inputs: 38dB  
INPUT IMPEDANCE  
47k ohms  
POWER/CURRENT CONSUMPTION  
2400VA  
1.3A (300W) Class AB Idle  
0.2A (46W) Standby  
DIMENSIONS  
Height: 260mm (10.25”)  
Width: 460mm (18”)  
Depth: 585mm (23”)  
Weight: 54kg  
(120lbs)  
COLOUR  
Available in silver or black  
MULTICHANNEL AMPLIFIER  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Display LED.................................................................................................7  
Error Detection........................................................................................13  
Front Panel Layout...............................................................................7  
Fuse Protection.......................................................................................13  
Ground Lift Switch................................................................................9  
IEC Power Connector........................................................................9, 11  
Input Terminals........................................................................................8  
LED Brightness .......................................................................................9  
Loudspeaker Impedance ..............................................................15  
Loudspeaker Power............................................................................15  
Mains/Line Fuse.....................................................................................14  
Mains Supply Connection .............................................................11  
Mains Switch .............................................................................................9  
Operating Temperature....................................................................4, 13  
Output Terminals ...................................................................................11  
Over Temperature Protection......................................................13  
Phasing..........................................................................................................11  
Placement ...................................................................................................4  
Rail Fuses ....................................................................................................13  
Rear Panel Layout.................................................................................8  
Remote Trigger.......................................................................................9  
Safety Precautions ...............................................................................6  
Serial Number..........................................................................................2  
Terminations..............................................................................................11  
Troubleshooting......................................................................................16  
Ventilation.....................................................................................................4  
Warm-Up Period.....................................................................................12  
18  
PLINIUS ODEON  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Musical Instrument Amplifier SESSIONBASS User Manual
Philips Car Video System 190V User Manual
Philips CD Player AZ1133 User Manual
Philips Cell Phone 859 User Manual
Philips Digital Camera SPC315NC User Manual
Philips Stereo Amplifier SA2411 User Manual
Phoenix Gold Speaker ATC8DM User Manual
Polaroid Portable DVD Player 20071226 User Manual
Poulan Lawn Mower 163598 User Manual
Precision Trading Network Card USB Throttle Quadrant Console User Manual