|
Internet Telephony PBX System
IPX-300 Series
Quick Installation Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Document Objectives ....................................................................................... 4
Document Organization.................................................................................... 5
Preparation before beginning administration on IP PBX ....................................... 6
Network Interface quick configurations ......................................................... 7
Step1. Operation Mode (For IPX-300W)........................................................ 8
Step2. Internet Setting (AP Mode) ............................................................... 8
Step3. NAT Setting..................................................................................... 9
Step4. IPPBX Setup...................................................................................10
Voice communication samples.....................................................................11
IP Phone and Wi-Fi Phone register to IP PBX ...............................................12
IP Phone and Wi-Fi Phone make off-Net calls via Gateway............................15
Quick reference in CD-ROM guide ....................................................................19
Download from Www.Somanuals.com. All Manuals Search And Download.
Document Objectives
This guide provides physical installation, LAN/WAN IP configurations, and Internet
access
establishment information for the IP PBX.
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Document Organization
This guide is organized as follows:
• Preparation before beginning administration on IP PBX
• Administration interface
• LAN/WAN Interface quick configurations
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation before beginning administration on IP PBX
Physical Installation
IPX-300: Internet Telephony PBX System
IPX-300W: Wi-Fi Internet Telephony PBX System
Figure 1. Front Panel of IPX-300
Figure 2. Front Panel of IPX-300W
Figure 3. Rear Panel of IPX-300
Figure 4. Rear Panel of IPX-300W
Administration Interface
IP PBX provides GUI (Web based, Graphical User Interface) for machine
management and administration.
Web configuration access:
To start IP PBX web configuration, you must have one of these web browsers
installed on computer for management
• Microsoft Internet Explorer 6.0.0 or higher with Java support
Default LAN interface IP address of IP PBX is 192.168.0.1. You may now open your
web browser, and insert 192.168.0.1 in the address bar of your web browser to
logon IP PBX web configuration page.
IP PBX will prompt for logon username/password, please enter: admin / 123 to
continue machine administration.
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure5. Input prompt
In order to connect machine for administration, please locate
your PC in the same network segment (192.168.0.x) of IP PBX. If
you’re not familiar with TCP/IP, please refer to related chapter on
user’s manual CD or consult your network administrator for proper
network configurations.
Note
Network Interface quick configurations
Wizard for Quick Setup of the IP PBX, after finishing the authentication, please click
“Wizard” to enter quick start:
Figure 6. Wizard-Operating Mode settings
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Step1. Operation Mode (For IPX-300W)
For most users, Internet access is the primary application. The IP PBX supports the
WAN, LAN and WLAN interface for Internet access and remote access. When you
click “Operation Mode” from within the Wizard Setup, the following setup page will
be show.
Three WLAN modes of operation are available for Internet Access:
AP Mode:
In this mode the IP PBX supports AP functionality only. The IP PBX has the
following network interfaces: WAN, LAN and Wireless LAN.
AP-Client Mode:
In this mode the IP PBX accesses a remote AP. Please be sure that you have an
account to access your wireless service provider AP. In this mode the WAN interface
is used a 2nd LAN interface.
WISP & AP Mode:
The IP PBX must access remote AP. Please be sure that have account to access
from remote AP. In this WISP & AP mode the network interface will change from
WAN port to LAN port and all of network access will through by remote AP.
Step2. Internet Setting (AP Mode)
WAN Setting
Network Address Translation (NAT) serves connecting multiple
NAT Mode
computers to the Internet using one IP address.
Bridge mode serves to connect a local area network (LAN /
Bridge Mode
Wireless) to another local area network that uses the same
protocol.
Three methods are available for Internet Access. Static IP
/ DHCP / PPPoE type for your select. You should refer to
“Network Setting” in user menu.
WAN Port IP
Assignment
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 7. Wizard-Internet settings
AP Setting (For IPX-300W)
For configuring correctly the WLAN port in client mode, the below instructions will
provide a quick start. It is advised if possible to use the simplest network settings
for first try.
For making sure the IP PBX is connecting to your wireless router (AP). You need
to set up the following: SSID, Frequency Channel, Authentication method and
Encryption parameters (Type/Encryption length/Keys.)
Figure 8. Wizard-AP settings
Step3. NAT Setting
LAN IP Setting
Private IP address for connecting to a local private
network. (Default: 192.168.0.1)
LAN IP Address
Subnet mask for the local private network (Default:
255.255.255.0)
Subnet Mask
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
DHCP Server
Enable to open LAN port DHCP server
Assigned DHCP IP
Address
DHCP server range from start IP to end IP
Client to ask DHCP server refresh time, range from 60
to 86400 seconds
DHCP IP Lease Time
Figure 9. Wizard-NAT settings
Step4. IPPBX Setup
The IP PBX allows multiple ITSP providers / User Extensions registration by simply
fill-in the required information in the provided table.
Figure 10. Wizard-IP PBX settings
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Service Provider:
Caller ID
Username
Password
Host
Service provider name
Input Provider name
Input Provider password
Input Providers server address
Providers server port
Port
User Extensions:
User Extension
Password
Input Extension number
Input Extension password
Input Extension caller id
Caller Id
After completing the wizard setup, click “Submit” button. The IP PBX will save
configuration and reboot IP PBX automatically, after 50 seconds, you can re-load
setting page again.
Figure 11. Wizard-Rebooting
Voice communication samples
The chapter shows you the concept and command to help you configure your IP
PBX System through sample configuration. And provide several ways to make calls
to desired destination in IP PBX. In this section, we’ll lead you step by step to
establish your first voice communication via web browsers operations.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
IP Phone and Wi-Fi Phone register to IP PBX
In the following samples, we’ll introduce IP Phone and Wi-Fi Phone register to IP
PBX applications.
Figure 12. Topology of instruction example
Machine configuration:
STEP 1: Please log in IP PBX via web browser and browse to “Network Setup
⁄ WLAN Setting” configuration menu. Enable the WLAN and setup the related
configuration. The sample configuration screen is shown below:
Figure 13. WLAN Setting of IPX-300W
12
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 2: Browse to “IP PBX Setup ⁄ User Extensions Setup” configuration menu.
Figure 14. User extension setting of IP PBX
STEP 3: Click the “Add” button to create extension account ext.100 and ext.101.
Figure 15. Add extension setting of IP PBX
STEP 4: Please log in VIP-154T and browser to “SIP setting ⁄ Domain Service”
configuration menu. Insert the account/password information then save and reboot
machine. The sample configuration screen is shown below:
Data match with Fi gure 15. IP
PBX’s extensio n settings
The IP address
of IP PBX
Figure 16. Web page of VIP-154T
13
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 5: Please take VIP-192 and setup the wireless network to connect with IP
PBX (IPX-300W) by keypad menu method. Then log in VIP-192 via web browser
and browser to “SIP Settings” configuration menu. Insert the Register and
Outbound Proxy IP Address information.
The IP address
of IP PBX
Figure 17. SIP settings of VIP-192
Then browse to “SIP Account Settings” configuration menu and fill in the account/
password information. The sample configuration screen is shown below:
Data match with Fi gure 15. IP
PBX’s extensio n settings
Figure 18. SIP account settings of VIP-192
STEP 6: After both of devices have registered to IP PBX successfully, it could
browse to “Information ⁄ PBX Extension Status” page to show the registration
status:
Figure 19. Extension status
Test the scenario:
1. VIP-154T pick up the telephone
2. Dial the number: 100 (VIP-192) shall be able to connect to the VIP-192
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Then the VIP-192 should ring. Please repeat the same dialing steps on VIP-192
to establish the first voice communication from VIP-154T
IP Phone and Wi-Fi Phone make off-Net calls via Gateway
In the following samples, we’ll introduce VIP-154T and VIP-192 makes off-Net Calls
(PSTN calls) via VIP-480FO applications.
Figure 20. Installation example with VIP-480FO
Machine configuration:
STEP 1: Please refer to the first sample and let VIP-154T and VIP-192 register to
IP PBX.
STEP 2: Please log in IP PBX via web browser and browse to “IP PBX Setup ⁄ User
Extensions Setup” configuration menu to add four accounts for VIP-480FO using.
Figure 21. Add accounts for VIP-480FO
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3: Browse to “IP PBX Setup ⁄ Attendant Extension” configuration menu.
Assign an attendant number which inexistence extension in Extension List and the
sample configuration screen is shown below:
Figure 22. Assign an attendant number
Pressing the “Submit” button for activate the configuration.
STEP 4: Browse to “IP PBX Setup ⁄ Dialing Rules” configuration menu. Add a
dialing rule for making off-Net calls via VIP-480FO, and press the “Insert” button
for activate the configuration.
Figure 23. Add dialing rule for grab the FXO ports of VIP-480FO
STEP 5: Please log in VIP-480FO via web browser and browse to “Advance Set-
up ⁄ VoIP Setup ⁄ VoIP Basic” configuration menu. Insert the account/password
information and set up the hunting function. The sample configuration screen is
shown below:
Figure 24. Set up the number of FXO ports of VIP-480FO
1ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 25. Set up the Hunting Member of FXO ports
Figure 26. Set up the Proxy Server IP address for register to IP PBX
STEP 6: Browse to “Dialing Plan” configuration menu. Add an Incoming Dial Plan
(no.0) for redirect the PSTN outgoing calls to FXO ports.
Figure 27. Add an incoming dial plan
STEP 7: Browse to “Port Status” configuration menu. Fill in the auto attendant
number 555 to all of ports. (Where 555 is the autoattendant number of IP PBX)
Figure 28. Hot Line to auto-attendant of IP PBX
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP8: After all of devices have registered to IP PBX successfully, the Extension
Status page will show the registration status:
Figure 29. Extension status page with Phone and Gateway registered
Test the scenario:
1. VIP-154T pick up the telephone
2. Dial the number: 0 shall be able to connect to the port 1 of VIP-480FO
3. Then the telephone will hear the dial tone from PSTN lines, and dial the number:
12345678 shall be able connect to the User A.
4. Then the telephone of User A will ringing, User A can pick up the handset and
talk with VIP-154T.
5. Both VIP-154T and User A hang up the calls.
6. User A pick up the telephone and dial the number: 23456789 should be able to
connect to the Auto Attendant System of IP PBX.
7. The User A will hear the prompts, and dial the extension number: 100 shall be
able connect to the VIP-192.
8. Then the VIP-192 should will ringing, and it to pick up the call then talk with
User A.
1ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick reference in CD-ROM guide
This guide is used to help you startup your Wizard settings. It is also recommended
to check the user manual CD-ROM for more details likes the “IP PBX Setup”, and
how to set the device back to default value.
1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
This page is intentionally left blank
Download from Www.Somanuals.com. All Manuals Search And Download.
|