PL2011M
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Table of Contents...............................................................................................................1
Preface ...............................................................................................................................2
Chapter 1 Installation........................................................................................................4
Unpacking ............................................................................................................................................. 4
Height Adjustment Stand ...................................................................................................................... 5
Tilt, Swivel and Pivot Rotation ............................................................................................................. 5
Connecting the Display to your Computer ............................................................................................ 5
Connecting the AC Power..................................................................................................................... 5
Connecting the Audio Cable ................................................................................................................. 5
Optional Mounting Alternatives............................................................................................................ 6
Detaching LCD Monitor from Its Stand................................................................................................ 6
Interface for Arm Applications.............................................................................................................. 6
Power Management System .................................................................................................................. 6
Chapter 2 Display Controls...............................................................................................7
User Controls ........................................................................................................................................ 7
Adjusting the Monitor's Display............................................................................................................ 7
Function Description............................................................................................................................. 8
Chapter 3 Technical Information .....................................................................................9
Specifications ...................................................................................................................................... 10
Standard Timing Table........................................................................................................................ 12
Troubleshooting .................................................................................................................................. 13
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Preface
This manual is designed to assist users in setting up and using the PL2011M LCD Monitor. Information in this
document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the
contents. The information in this document is subject to change without notice. This document contains proprietary
information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic or other means, in any form, without prior written permission of the manufacturer.
FCC Statement Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed
and used in accordance with the instruction, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the manufacturers may void the user's authority to operate
this equipment.
Warning
Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or
modifications not expressly approved by the party responsible for compliance could void your authority to operate
the equipment.
Canadian DOC Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe B repecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Important Safety Instructions
Please read the following instructions carefully. This manual should be retained for future use.
1. To clean LCD Monitor screen:
-- Power off LCD Monitor and unplug the AC Cord.
-- Spray a non-solvent cleaning solution onto a rag.
-- Gently clean the screen with dampened rag.
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can
severely damage it.
3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be performed
by an authorized technician.
5. Store LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD
Monitor outside this range could result in permanent damage.
6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.
*
*
*
Monitor to PC signal cable is frayed or damaged.
Liquid spilled into LCD Monitor or the monitor has been exposed to rain.
LCD Monitor or the case is damaged.
7. A certified line is required to connect this device to a power outlet. For a nominal current up to 6A and a device
weight above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm2 must be used.
Important Recycle Instruction:
LCD Lamp(s) inside this product contain mercury. This product may contain other
electronic waste that can be hazardous if not disposed of properly. Recycle or dispose in
accordance with local, state, or federal Laws. For more information, contact the Electronic
Industries Alliance at WWW.EIAE.ORG. For lamp specific disposal information check
WWW.LAMPRECYCLE.ORG.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Chapter 1 Installation
Unpacking
Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a
stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for
sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the
Monitor does not become too hot.
After you unpack the LCD Monitor, make sure that the following items were included in the box:
*
*
*
LCD Monitor
Monitor-to-PC VGA Cable
Monitor-to-PC DVI-D Cable
*
*
*
User's Manual
Power Cord
Stereo Jack Audio Cable
Register Your Planar Products Today
Thank you for choosing Planar. To assure you receive all the benefits
of your Planar product and services, register your Planar product
today. Visit our website to register your product at
Cables, Replacement Lamps and Accessories
To find cables, replacement lamps and accessories for your Planar
projector, LCD monitor, touchscreen or other Planar products visit our
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Height Adjustment Stand
To unlock the height adjustment feature of the stand, locate the pin
on the back of the stand column and turn the pin knob
counter-clockwise. (See fig.1-1 )
Figure 1-1
Tilt, Swivel and Pivot Rotation
The LCD Monitor is designed to have a tilt range of -5°to
+25°, a swivel range of -35°to +35°, and a 90° pivot
rotation. (See fig. 1-2)
Figure 1-2
Warning: Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this
will result in damaging the Monitor and Monitor stand. The monitor stand base may forcefully extend and cause
injury. Raise the monitor to its "Full Up" position before removing the monitor stand.
Connecting the Display to your Computer
1. Power off your computer.
2. Connect one end of the signal cable to the LCD Monitor’s VGA port
or DVI port.(See Fig 1-5)
3. Connect the other end of the signal cable to the VGA port or DVI port
on your PC.
4. Make sure connections are secure.
Figure 1-5
Connecting the AC Power
1. Connect the power cord to the AC adapter. (See Fig. 1-6)
2. Connect the AC adapter’s DC output connector to the DC Power Jack
of the monitor.
3. Connect the power cord to an AC power source.
Figure 1-6
Connecting the Audio Cable
1. Connect the audio cable to the "LINE OUT " jack on your PC's
audio card or to the front panel's “AUDIO OUT” jack of your CD
ROM drive. (See Fig. 1-7)
2. Connect the other end of the audio cable to the LCD Monitor's
"LINE IN" jack.
Figure 1-7
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Optional Mounting Alternatives
Warning: The monitor stand base may forcefully extend and cause injury.
Raise the monitor to its "Full Up" position before removing the monitor
stand.
Detaching LCD Monitor from Its Stand
Unscrew screws n the swivel base support column and pull downo the
second.
Figure 1-3
Interface for Arm Applications
Before installing to mounting device, please refer to Fig.1-3.
The rear of this LCD display has four integrated 4 mm, 0.7 pitches
threaded nuts, as well as four 5 mm access holes in the plastic covering
as illustrated in Figure 1-4. These specifications meet the VESA Flat
Panel Monitor Physical Mounting Interface Standard (paragraphs
2.1 and 2.1.3, version 1, dated 13 November 1997).
Note :Please using Ø 4mm x 8mm (L) screw for this application.
Figure 1-4
Power Management System
This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The
VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync. signal.
When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power LED
indicator will light yellow.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Chapter 2 Display Controls
User Controls
A brief description and the location of all LCD Monitor functions control and indicator:
8
Figure 2-1
1
2
3
Stereo Speakers
PC Audio Stereo output.
Increase Volume - Turn the knob clock wise.
Decrease Volume - Turn the knob counter clock wise.
Speaker Volume Control
Soft Power Switch
Press the soft power switch to switch the monitor ON/OFF.
LED lights Green color --- Power is ON.
LED lights Yellow --- Monitor is in "Power Saving Mode".
LED is off --- Power is OFF.
4
Power-On Indicator
Press either left or right control button for OSD (On Screen
Display) menu selection.
5
6
7
8
Function Select Buttons
Adjustment Control
Buttons
Press the left button to decrease the OSD setting and press the
right button to increase the OSD setting.
The monitor speakers will be disabled when using an external
headphone or external speakers.
External Headphone Jack
Input Select
Press this button to switch between Analog or Digital input.
Adjusting the Monitor's Display
The monitor has four function control buttons to select among functions shown on OSD menu,
designed for easy user-viewing environments.
OSD Function Menu
To access OSD Main menu, simply press one of the Function Select
control buttons, and the menu diagram will pop up on the screen as
shown on Fig. 2-2:
Continue pressing the Function Select buttons to scroll through the
entire menu items, then press Adjustment Control buttons to adjust
content of selected item.
Figure 2-2
Attention: Firmware revision may have been updated in your monitor. However, the version number shown
on all OSD menus in this manual are listed Ver. 1.00.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Function Description
Ico
n
Function
Function Description
Brightness
Contrast
101 scales of brightness are available to choose from (0 to 100).
101 scales of contrast are available to choose from (0 to 100).
This function adjusts the display's horizontal position
This function adjusts the display's vertical position.
Horizontal Position
Vertical Position
This function sets the transparency of the OSD menu. The transparency is
adjustable from 0 to 5 scales are available.
A total of 101 scales (0 to 100) are available to adjust the focus and clarity of the
display.
OSD Transparency
Phase
This function carries a frequency-tracking feature that offers users better
stability and clarity. 101 scales (from -50 to +50) are available on the
mode that is currently running. The adjustable range can be variable in
different modes. This function records the deviated number of clock
period between input timing and supported timing. The clock value may
not be”0” after Auto Adjustment when the input timing is different from
supported timing.
Clock
Push the (
) button to select a different color temperature. Please see
Color Temperature
the diagram below for function and description.
This function moves the OSD menu window horizontally.
This function moves the OSD menu window vertically.
Horizontal OSD Position
Vertical OSD Position
Because the H and V-Frequencies of both 640 x 400 70Hz, and 720 x 400
70Hz, are the same, this function let's you manually select either 640 x
400 (graphics mode), or 720 x 400 (text mode).
Graph Text
The recall function will return all adjusted parameters to factory preset
values.
Recall
Five OSD language options are available: English, German, French,
Spanish, and Italian. Press the left or right adjustment control button to
select other language.
Language
Press
button ( ) to activate the selected function, Auto Adjustment,
Use Analog Input or Use Digital Input.
The Auto Adjustment function let you adjust the display size, clock and
phase to obtain the best viewing settings. This process will take 3 ~ 5
seconds to complete. Attention : After Auto Adjustment, the display
might display wrong position or size, if it has received a pattern which
has no screen border. You may select either Analog or Digital Input video
when VGA input or/and DVI Input is/are available.
Auto and Input Select
Saves the values of this setting and exits the OSD menu function.
Exit
Icon
9300
Function
Description
CIE coordinated Color Temperature of
9300°K
Sets the CIE coordinate color temperature to
9300°K
CIE coordinated Color Temperature of
7500°K
CIE coordinated Color Temperature of
6500°K
Three colors (Red, Green, Blue) can be
adjusted from the OSD menu
Sets the CIE coordinate color temperature to
7500°K
Sets the CIE coordinate color temperature to
6500°K
Sets the settings to a by user defined CIE
Temperature.
7500
6500
User
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Notice:
“OSD Lock Out” Function:
When monitor is in normal display, you can enable the “OSD Lock Out” function.
* How to enter “OSD Lock Out” function =>
Step 1:
The monitor is displaying after power on.
Step 2:
To press the buttons “VOL –“ and “VOL+” and “Function >” at the same time for 3 seconds or more.
Step 3:
Monitor will show an “OSD Lock Out” message for 5~10 seconds and the message will disappear automatically.
While the monitor is in the state of “OSD Lock Out”, if press OSD button, “OSD Lock Out” message will appear
for 5~10 seconds on screen.
* How to exit “OSD Lock Out” function =>
Step 1:
When the monitor is in the state of “OSD Lock Out” .
Step 2:
To press the buttons “VOL –“ and “VOL+” and “Function >” at the same time for 3 seconds or more.
Step 3:
Display will show main OSD menu. (Now the monitor already has escaped from “OSD Lock Out” function.)
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Chapter 3 Technical Information
Specifications
LCD Panel
Size
PL2011M
20.1"
Display Type
Resolution
Display Dot
Display Color
Active matrix color TFT LCD
1600x1200
1600 x (RGB) x 1200
16.7M (RGB 8bit)
Video
Input Signal
Input Impedance
Polarity
Analog RGB 0.7Vp-p
75 Ohm ± 2%
Positive, Negative
Digital TMDS
Amplitude
0 - 0.7 ± 0.05 Vp
TMDS
Multi-mode Supported
Horizontal Frequency: 24 ~ 80 KHz
Vertical Frequency: 49 ~ 75 Hz
24~80KHz
49~75 Hz
Audio
Input
Output
500mVrms
2W+2W
Control
Power switch (hard and soft types)
On/Off switch with LED indicator
OSD
Brightness
Digital
Contrast
Digital
Horizontal Position
Vertical Position
Phase
Digital
Digital
Digital
Clock
Digital
Display Mode Setup
OSD Format
Use EEPROM to save settings in memory
26 characters x 15 rows
Power Management
Mode
Power Consumption*
AC Input
240 VAC
240 VAC
240 VAC
LED Color
On
Off
70W maximum
3W maximum
3W maximum
Green
Yellow
Dark
Soft switch off
Yellow: Standby, Suspend, Off
Disconnected
3W maximum
240 VAC
Dark: Power off
* Meeting VESA DPMS requirements measured from AC Input.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Sync Input
Signal
Separate TTL compatible horizontal and vertical synchronization
Digital TMDS
Polarity
Positive and negative
Plug & Play
Supports VESA DDC2B functions
External Connection
Power Input (AC input)
Video Cable
Power cord
15-pin D-sub connector, 24-pin DVI-D
Stereo Jack
Audio Cable
Environment
Operating Condition:
Temperature
5°C to 40°C/41°F to 104°F
Relative Humidity
Temperature
20% to 80%
-20°C to 60° C/-4°F to140° F
Storage Condition:
Relative Humidity
5% to 85%
Power Supply (AC Input)
Input Voltage
Input Current
Single phase, 100 ~ 240VAC, 50 / 60 Hz
1.2 A maximum
Size and Weight
Dimensions
Net Weight
451.4 (W) x 451.8 (H) x 214 (D) mm
12.9 ± 0.5 kg
Gross Weight
14.9 ± 0.5 kg
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Standard Timing Table
If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing.
FH(KHZ)
FV(HZ) POLARITY (DOT/
LINE)
31.469
70.087
24.83
SYNC
TOTAL
ACTIVE
(DOT/
LINE)
640
350
640
400
640
400
640
400
640
480
640
480
640
480
640
SYNC
WIDTH
FRONT
PORCH
BACK
PORCH
PIXEL
FOREQ
TIMING
(DOT/LINE) (DOT/LINE) (DOT/LINE) (MHZ)
640x350
VGA-350
640x400
NEC PC9801
640x400
VGA-GRAPH
640x400
NEC PC9821
640X480
VESA-PAL
640x480
VGA-480
+
–
–
–
–
+
–
–
-
800
449
848
440
800
449
800
449
800
629
800
525
864
525
832
520
96
2
64
8
96
2
64
2
96
2
96
2
64
3
40
3
16
37
64
7
48
60
80
25
48
35
80
34
48
85
48
33
96
39
120
20
25.175
21.05
56.42
31.469
70.087
31.5
16
12
16
13
16
62
16
10
64
3
25.175
25.197
25.175
25.175
30.24
70.15
31.469
50.030
31.469
59.94
35.00
66.67
-
–
–
–
–
–
–
640x480
APPLE MAC-480
640x480
37.861
72.809
16
1
31.5
VESA-480-72Hz
480
640x480
VESA-480-75Hz
720x400
VGA-400-TEXT
832x624 APPLE
37.5
75
31.469
70.087
49.725
–
–
–
+
–
840
500
900
449
1152
640
480
720
400
832
64
3
108
2
16
1
18
12
32
120
16
54
35
224
31.5
28.322
57.2832
64
MAC-800
800x600
SVGA
800x600
VESA-600-60Hz
800x600
74.55
35.156
56.25
37.879
60.317
48.077
72.188
46.875
75
–
+
+
+
+
+
+
+
+
–
667
1024
625
1056
628
1040
666
1056
625
1344
806
1328
816
1328
806
1312
800
624
800
600
800
600
800
600
800
600
1024
768
1024
768
1024
768
1024
768
1024
768
1152
864
1152
864
1152
864
1280
960
1280
960
1280
960
1280
1024
1280
1024
1600
1200
3
72
2
128
4
120
6
80
3
136
6
176
4
136
6
96
3
96
3
96
3
96
3
128
2
112
3
112
3
112
3
1
24
1
40
1
56
37
16
1
24
3
16
8
24
3
16
1
32
39
128
22
88
23
64
23
160
21
160
29
112
36
144
29
176
28
176
29
192
32
200
44
256
32
312
36
312
36
312
36
248
38
248
38
304
46
36
40
50
VESA-600-72Hz
800x600
VESA-600-75Hz
1024x768
XGA
1024x768
COMPAQ-XGA
1024x768
VESA-768-70Hz
1024x768
VESA-768-75Hz
1024x768
APPLE MAC-768
1152x864
(60Hz)
1152x864
(70Hz)
1152x864
(75Hz)
1280x960
(60Hz)
1280x960
(70Hz)
49.5
65
48.363
60.004
53.964
66.132
56.476
70.069
60.023
75.029
60.24
75.02
54.054
59.270
63.851
70.012
67.50
75.00
60.00
60.00
70.00
70.00
75.00
75.00
64
–
+
+
–
71.664
75
–
+
+
–
78.75
80
1328
803
1480
912
1480
912
–
3
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
40
13
32
1
64
2
96
1
96
1
96
1
48
1
16
1
64
1
80
94.499
108.00
108.00
126.00
135.00
108
1600
900
1800
1000
1800
1000
1800
1000
1688
1066
1688
1066
2160
1250
1280x960
(75Hz)
1280x1024VESA-
1024-60Hz
1280x1024VESA-
1024-75Hz
16000x1200VESA
-1200-60Hz
112
3
144
3
192
50
60
80
75
75
135
162
60
Note: Mode 640x350, 640x400 and 720x400 will locate on middle position but cannot be expanded to full screen on vertical direction.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Troubleshooting
This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various
VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new
VGA card is selected.
Attention
This LCD Monitor Supports Multiple VGA Modes.
Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.
PROBLEM Picture is unclear and unstable
The picture is unclear and unstable, please perform the following steps :
1. Enter PC to “Shut Down Windows” status while you’re in MS-Windows environment.
2. Check the screen to see if there’s any black vertical stripes appear. If there are, take advantage of the “Clock” function
in OSD menu and adjust (by increment or decrement numbers) until those bars disappear.
3. Move to “Phase” function in OSD menu again and adjust the monitor screen to its most clear display.
4. Click “No” on “Shut Down Windows” and back to the normal PC operating environment.
PROBLEM There is no picture on LCD Monitor
If there’s no picture on the LCD Monitor, please perform the following steps:
1. Make sure the power indicator on the LCD Monitor is ON, all connections are secured, and the system is running on
the correct timing. Refer to Chapter 3 for information on timing.
2. Turn off the LCD Monitor and then turn it back on again. If there is still no picture, press the Adjustment Control
button several times.
3. If step 2 doesn’t work, connect your PC system to another external CRT. If your PC system Functions properly with
a CRT Monitor but it does not function with the LCD Monitor, the output timing of the VGA card may be out of the
LCD’s synchronous range. Please change to an alternative mode listed in the Standard Timing Table or replace the
VGA card, and then repeat steps 1 and 2.
PROBLEM There is no picture on LCD Monitor
If you have chosen an output timing that is outside of the LCD Monitor’s synchronous range (Horizontal: 24 ~ 80 KHz
and Vertical: 49 ~ 75 Hz), the OSD will display a “Out of Range” message. Choose a mode that is supported by your LCD
Monitor.
Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will display a message “No
Input Signal”.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Planar Systems, Inc.
1195 NW Compton Drive
Beaverton, OR 97006-1992
© 2006 Planar Systems, Inc.
Planar is a registered trademark of Planar Systems, Inc. Other brands and names are
the property of their respective owners. Technical information in this document is
subject to change without notice.
HDPNREH204I
Download from Www.Somanuals.com. All Manuals Search And Download.
|