Planar Car Video System PXL2760MW User Manual

PXL2760MW  
LED LCD Monitor  
USER'S GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Content  
Operation Instructions...................................................................................................................................................1  
Safety Precautions...........................................................................................................................................................2  
Package Overview ...........................................................................................................................................................3  
First Setup...........................................................................................................................................................................4  
Front View of the Product ............................................................................................................................................5  
Rear View of the Product ..............................................................................................................................................6  
Quick Installation .............................................................................................................................................................7  
Basic Operation.................................................................................................................................................................8  
Advanced Operation—OSD Menu......................................................................................................................... 10  
Supporting Timing Modes ........................................................................................................................................ 13  
Technical Information................................................................................................................................................. 14  
Wall-Mount Installation Instructions..................................................................................................................... 15  
Care and Maintenance............................................................................................................................................ 16  
Troubleshooting............................................................................................................................................................ 16  
Planar Support ............................................................................................................................................................... 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation Instructions  
Thank you for purchasing the PXL2760MW LED LCD monitor. Please read this guide thoroughly  
before installation.  
FCC RADIO FREQUENCY INTERFERENCE STATEMENT  
WARNING: (FOR FCC CERTIFIED MODELS)  
This  
has been tested and found compliant with the limits for a Class B digital  
LED LCD Monitor  
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide proper  
protection against harmful interference to a residential installation. This  
LED LCD Monitor  
generates, uses, and can radiate radio frequency energy. Harmful interference to radio  
communication may be the result if it‘s not properly installed and used. However, there is no  
guarantee that interference will not occur in a particular installation. If this  
LED LCD Monitor  
does cause serious interference to radio or television reception, resetting may correct it.  
Moreover, users are encouraged to reduce interference by doing one or more of the following:  
Reorient or relocate the receiving antenna.  
Move the  
and the receiver further away from each other.  
LED LCD Monitor  
Connect the  
into an outlet on a circuit different from that to which the  
LED LCD Monitor  
receiver is connected.  
Consult your local dealer or a qualified technician.  
FCC Warning:  
To assure a continued FCC compliance, a user must use a grounded power supply cord and the  
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized  
changes or modifications to this  
device.  
would void the user‘s authority to operate this  
LED LCD Monitor  
Note: If necessary, shielded interface cables and AC power cord must be used to meet the  
emission level limits.  
According to WEEE regulation, this LED LCD Monitor can't be handled as normal trash in Europe when it is  
out of usage. Please refer to the recycle information on Planar’s website to handle it.  
For more information on how to recycle your product, please visit WWW.PLANARSYSTEMS.COM/GREEN  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Precautions  
Follow all warnings, precautions and maintenance as recommended in this user’s manual to  
maximize the life of your unit.  
Do:  
Turn off the product before cleaning.  
LED Display screen surface may be cleaned using a soft clean cloth moistened with mild  
window glass commercial cleaners or 50/50 mixture of water and isopropyl alcohol.  
Use a soft cloth moistened with mild detergent to clean the display housing.  
Disconnect the power plug from AC outlet if the product is not going to be used for an  
extended period of time.  
Don’t:  
Do not touch the LED Display screen surface with sharp or hard objects.  
Do not use abrasive cleaners, waxes or solvents for your cleaning.  
Do not operate the product under the following conditions:  
o
o
o
o
Extremely hot, cold or humid environment.  
Areas susceptible to excessive dust and dirt.  
Near any appliance generating a strong magnetic field.  
In direct sunlight.  
If smoke, abnormal noise or odor emits from your LED LCD Monitor, remove the power cord  
immediately and call your service center.  
Never remove the rear cover of your LED LCD Monitor. The display unit inside contains  
high-voltage parts and may cause electric shock.  
LED LCD Monitor  
Never try to repair your yourself. Always call your service center or a  
qualified technician to fix it.  
Due to safety concerns, if the VESA mounting kit is purchased separately, please  
make sure the mounting kit is UL-listed, and replaceable only by service personnel.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Package Overview  
Congratulations on your purchase of this high performance LED edge lit, LCD monitor.  
This LED LCD Monitor comes with the following accessories:  
LED LCD Monitor  
Base  
Power Cord  
VGA Signal Cable  
Audio-in Cable  
HDMI Cable  
User’s Guide  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
First Setup  
Install the stand base  
LED LCD Monitor  
1. Lay the  
flat on a table with the LED screen face down. To prevent the monitor  
from being scratched, put a piece of soft cloth on the table on which the screen will be set.  
2. Unpack the base, one hand hold the monitor, the other hand attach the base to the stand.  
LED LCD Monitor  
3. Stand the  
up.  
Disconnecting the stand base  
LED LCD Monitor  
LED LED  
screen face down. To prevent the  
1. Lay the  
flat on a table with the  
from being scratched, put a piece of soft cloth on the table on which the screen  
LCD Monitor  
will be set.  
2. Hold the monitor down with one hand. With the other hand, use two fingers to press the  
hooks down as directed below.  
3. Remove the base from the stand.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front View of the Product  
① ② ③ ④ ⑤  
OSD Turn On/ Off  
Scroll Down/ Adjust Decrease/ Picture Mode/ Auto *  
Scroll UP/ Adjust Increase/ Audio Adjust/ Mute *  
Input select/ Confirm Selection  
Power On/Off / LED Indicator  
* Hot keys Instructions please seeUsing the OSD Menuon page 7.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear View of the Product  
②③ ④ ⑤ ⑥  
Power Input  
Audio Input  
Headphone Jack  
DisplayPort Input (DisplayPort 20 pin)  
VGA Input (D-Sub 15 pin)  
HDMI input (HDMI 19 pin)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Installation  
Connect either VGA, HDMI or DisplayPort Video Source from the monitor to the computer.  
Make sure both monitor and computer are powered OFF. Please note: The monitor ships  
with only VGA and HDMI cables. DisplayPort cable may be sourced separately from a cable  
supplier.  
1.  
2. Connect the audio cable from audio output of computer to the audio input of the monitor.  
3. Connect the earphone to the earphone output terminal of the monitor. (Earphone sold  
separately).  
4. Connect power cord to a properly grounded AC outlet, and then to the monitor.  
5. Power-ON computer and then POWER-ON the monitor.  
6. Set the timing mode on your computer. Recommended resolution and refresh rate is 1920 x  
1080 @ 60Hz.  
Figure 1:  
PC  
Earphone  
(not supplied)  
Power cable  
Audio cable  
VGA cable  
DisplayPort cable  
(not supplied)  
HDMI cable  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operation  
Before using the LED LCD Monitor:  
Connect external equipment properly.  
Insert the power plug, and the power LED indicator will light orange.  
Power On/Off  
To turn the LED LCD Monitor on/off:  
Press  
Power button on the front of LED LCD Monitor. The power LED indicator light will be  
blue when the LED LCD Monitor is on.  
Using the OSD Menu  
Use OSD menus to adjust settings by using the menu button on the front of the LED LCD  
Monitor.  
1
Displays main menu  
Selects between VGA, HDMI, DisplayPort or Auto mode  
Exits from OSD menu  
2
Select the desired item when in OSD menu  
When not in OSD menu, directly enters Picture Mode, press 3 seconds  
activates Auto Image Adjust.  
Select the desired item when in OSD menu  
When not in OSD menu, directly enters Audio Adjust menu, press 3  
seconds enters Mute mode.  
+ ▲  
Recalls both Contrast and Brightness (when not in OSD menu)  
OSD Lock Out Function  
When LED LCD Monitor is in normal mode, the “OSD Lock Out” function can be enabled.  
Option 1: OSD lock – all 4 buttons are locked except the “POWER” button.  
Press and hold the 1 button and the button for 5 seconds to lock the OSD buttons.  
The LED LCD Monitor will show an “Locking OSD” message for 3 seconds and the message will  
disappear automatically.  
Repeat this step to unlock.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked.  
Press and hold the 1 button and the button for 5 seconds to lock all 5 buttons.  
The LED LCD Monitor will show a “Locking Power Button” message for 3 seconds and the  
message will disappear automatically.  
Repeat this step to unlock.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced Operation—OSD Menu  
You can use the OSD menu to adjust various settings for your LED LCD Monitor.  
Press the 1 button to display the OSD Menu, and use or to select the desired OSD menu.  
Short Cuts Function from the button(s)  
Auto Image Adjust: To auto adjust Horizontal Position, Vertical Position, Phase (Fine  
Tune) and Clock (H. Size) of the screen.  
Contrast: To adjust the foreground white level of screen image.  
: increase contrast, : decrease contrast.  
Brightness: To adjust the luminance of the video.  
: increase brightness, : decrease brightness.  
ECO Mode: Allows the user to change the ECO mode. Contrast and Brightness  
adjustment will be disabled when ECO is active.  
Press or key to adjust the ECO Mode in three levels.  
Over Drive: Allows the user to change the Over Drive strength. Improve the quality of  
the motion pictures.  
Press or key to adjust the Over Drive strength in five levels.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Input Select: When Input Select is pressed, change Input signal to VGA, HDMI,  
DisplayPort or Auto.  
Audio Adjust: To adjust the audio functions.  
Volume: To adjust the volume of speaker output.  
Mute: To turn the Mute ON/OFF.  
Audio: When in HDMI input, select where the audio source comes from Line-In or  
HDMI.  
DisplayPort Audio: When in DisplayPort input, select where the audio source comes  
from Line-In or Display Port.  
Color Adjust: To select the color for improving brightness and color saturation  
between Cool, Normal, Warm, User Color, and Picture Mode.  
Cool: Adds blue to screen image for cooler white.  
Normal: Adds red to screen image for warmer white and richer red.  
Warm: Adds green to screen image for a darker color.  
User Color: Individual adjustments for red (R), green (G), blue (B).  
1. Press button 2 to select the desired color.  
2. Press or button to adjust selected color.  
Picture Mode: Provides an optimum display environment depending on the contents  
displayed. It contains 4 user-selectable presets.  
Standard is for general windows environment and monitor default setting.  
Game optimized for PC game environment.  
Cinema optimized for movie and video environment.  
Text optimized for text editing and viewing in a word processing environment.  
Information: To display the information, regarding the current input signal coming  
from the graphic card in your computer.  
Note: See your graphic card user guide for more information about changing the  
resolution and refresh rate.  
Manual Image Adjust: To manually adjust the Clock, H. /V. position, Phase, and  
Sharpness.  
Clock: To adjust the width of the screen image.  
: decrease the width of screen image, : increase the width of screen image.  
H./V. Position: To adjust the horizontal and vertical position of the video.  
H. Position: : move screen to the right, : move screen to the left.  
V. Position: : move screen up, : move screen down.  
Phase: To adjust the delay time of data and clock.  
Press or to adjust to your preference.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sharpness: To adjust the clarity of a non-Full HD Resolution (1920x1080) signal with ▲  
or button.  
Setup Menu: To set up Language Select, OSD Position, OSD Time Out, OSD  
Background and LED mode.  
Language Select: To allow users to choose from available languages.  
OSD Position: Press or button to select between horizontal and vertical OSD  
Position adjustment.  
H. Position: To horizontally adjust the OSD position.  
: move OSD to the right, : move OSD to the left.  
V. Position: To vertically adjust the OSD position.  
: move OSD up, : move OSD down.  
OSD Time Out: To automatically turn off On Screen Display (OSD) after a preset period  
of time.  
OSD Background: Allows the user to turn the OSD background On or Off.  
LED: Allows the user to turn the LED Indicator On or Off.  
Memory Recall: To recall factory settings for Video & Audio controls.  
Press button 2 to select the Memory Recall menu option.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Supporting Timing Modes  
STANDARD  
VGA  
RESOLUTION  
720 x 400 @ 70Hz  
640 x 480 @ 60Hz  
640 x 480 @ 67Hz  
640 x 480 @ 72Hz  
640 x 480 @ 75Hz  
800 x 600 @ 56Hz  
800 x 600 @ 60Hz  
800 x 600 @ 72Hz  
800 x 600 @ 75Hz  
832 x 624 @ 75Hz  
1024 x 768 @ 60Hz  
1024 x 768 @ 70Hz  
1024 x 768 @ 75Hz  
1280 x 960 @ 60Hz  
1152 x 864 @ 75Hz  
1152 x 870 @ 75Hz  
1280 x 1024 @ 60Hz  
1280 x 1024 @ 75Hz  
1440 x 900 @ 60Hz  
1440 x 900 @ 75Hz  
1400 x 1050 @ 60Hz  
1600 x 1200 @ 60Hz  
1680 x 1050 @ 60Hz  
1920 x 1080 @ 60Hz  
VGA  
MAC  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
MAC  
VESA  
VESA  
VESA  
VESA  
VESA  
MAC  
VESA  
VESA  
VESA  
VESA  
CVT  
VESA  
VESA  
VESA  
Note:  
1. HDMI and DisplayPort supports 480i, 480p, 576i, 576p, 720p, 1080i, and 1080p.  
2. Simultaneously press 1 and 2 keys on monitor panel to switch between similar PC timings.  
Similar PC Timing on list below:  
720 x 400 @ 70Hz / 640 x 400 @ 70Hz  
720 x 480 @ 60Hz / 640 x 480 @ 60Hz  
1400 x 1050 @ 60Hz / 1680 x 1050 @ 60Hz  
Warning: Do not set the graphic card in your computer to exceed these maximum refresh rates.  
Doing so may result in permanent damage to your LED LCD Monitor.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical Information  
Panel  
27” TFT (with LED backlight)  
On: 40 Watts (typical), 50 Watts (maximum)  
Standby Mode: < 0.5 Watt  
Off: < 0.5 Watt  
Power Management  
Displayable Resolution  
Pixel Dimension  
Display Color  
Full HD 1920 x 1080 max. Vertical Frequency 60Hz max.  
0.3114 x 0.3114 mm  
16.7M  
Tilt  
0°~20° ( 2°)  
Active Display Area  
Temperature  
597.89 mm x 336.31 mm  
Operating: 0°C ~ +40°C  
Storage: -20°C ~ + 60°C  
Compliance  
Power  
FCC-B, CE, UL/cUL  
Input Voltage AC100-240 V  
3W x 2 (typical)  
Speaker  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wall-Mount Installation Instructions  
Preparing To Install The Optional Wall Mount Arm (not included)  
This LED LCD Monitor can be attached to a wall mounting arm  
you can purchase separately.  
Turn the power OFF then disconnect the cables from the LED  
LCD Monitor before performing the procedure below.  
1. Lay the LED LCD Monitor face down on a soft surface.  
2. Remove the 4 screws holding the stand to the hinge.  
3. Remove the stand.  
100mm x 100mm Screw  
Mounting Options  
Attaching The Optional Wall Mount Arm (not supplied)  
Follow these steps to finish installing the wall mounting arm:  
1. Place the wall mounting arm onto the back of the LED LCD  
Monitor. Line up the holes of the arm with the holes in the  
back of the monitor.  
2. Insert the 4 screws into the holes and tighten.  
3. Reconnect the cables. Refer to the User’s Guide that came  
with the optional wall mounting arm for instructions on  
attaching it to the wall.  
4mm, 0.7 pitch  
threaded holes x 4  
NOTE  
100mmx100mm VESA high hole (n=4), M4, pitch =0.7  
mm screw mounting kit not included.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Maintenance  
Care  
Avoid exposing your LED LCD Monitor directly to sunlight or other heat source. Place  
your LED LCD Monitor away from the sun to reduce glare.  
Put your LED LCD Monitor in a well ventilated area.  
Do not place any heavy things on top of your LED LCD Monitor.  
Make certain your LED LCD Monitor is installed in a clean and moisture-free area.  
Keep your LED LCD Monitor away from magnets, motors, transformers, speakers, and  
TV sets.  
Note  
Move the LCD out of the package and take off the plastic bag and Polystyrene Foam.  
Pull the base from Parallel versus Panel to Vertical.  
Adjust the Panel within -1 degree leaning forward and 20 degree leaning backward.  
You must bend harder to exceed 20 degree backward but this range is for packing the  
unit to a small size for storage only.  
Safety Tips  
If smoke, abnormal noise or odor came out from your LED LCD Monitor, caution you  
should remove the power cord immediately and call your service center.  
Never remove the rear cover of your LED LCD Monitor cabinet. The display unit inside  
contains high-voltage parts and may cause electric shock to human bodies.  
Never try to repair your LED LCD Monitor yourself. Always call your service center or a  
qualified technician to fix it.  
Troubleshooting  
No power  
Make sure A/C power cord is securely connected to the power adapter and the power supply  
LED LCD Monitor  
is firmly connected to the  
.
Plug another electrical device into the power outlet to verify that the outlet is supplying  
proper voltage.  
Make sure all signal cables are installed.  
Power on but no screen image  
LED LCD Monitor  
Make sure the video cable supplied with the is tightly secured to the video  
output port on back of the computer. If not, tightly secure it.  
Adjust brightness.  
Wrong or abnormal colors  
If any colors (red, green, blue) are missing, check the video cable to make sure it is securely  
connected. Loose or broken pins in the cable connector could cause an improper connection.  
LED LCD Monitor  
Connect the  
to another computer.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Planar Support  
Cables, Replacement Lamps, Accessories  
To find cables, replacement lamps and accessories for your Planar projector, monitor, touch  
stores who carry Planar products at http://www.planar.com/howtobuy  
Technical Support  
warranty information and access to Planar's Technical Library for online troubleshooting. To  
speak with Planar Customer Support please have you model and serial number available and  
dial:  
Planar Support  
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.  
Hours: 24 hours a day, 7 days a week.  
Toll or long distance charges may apply.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Security Camera C1525M B User Manual
Pentax Digital Camera Optio MX User Manual
PGS Gas Grill K 30 User Manual
Philips Car Stereo System CE151 User Manual
Philips Chipper 7CM5209 User Manual
Philips Cordless Telephone AQ95 56F 1224KR User Manual
Philips Satellite Radio DR500 User Manual
Poulan Blower 115350727 User Manual
Poulan Snow Blower 429890 User Manual
PYLE Audio Music Pedal PPDLSM User Manual