Download from Www.Somanuals.com. All Manuals Search And Download.
The information contained in this document is subject to change without notice.
This document contains proprietary information that is protected by copyright. All rights
are reserved. No part of this document may be reproduced, translated to another lan-
guage or stored in a retrieval system, or transmitted by any means, electronic,
mechanical, photocopying, recording, or otherwise, without prior written permission.
Windows is a registered trademark of Microsoft, Inc.
Other brand or product names are trademarks of their respective holders.
Important Recycle Instruction:
LCD Lamp(s) inside this product contain mercury. This product may contain
other electronic waste that can be hazardous if not disposed of properly. Recycle or
dispose in accordance with local, state, or federal Laws. For more information,
contact the Electronic Industries Alliance at WWW.EIAE.ORG. For lamp specific
disposal information check WWW.LAMPRECYCLE.ORG
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Table of Contents
Usage Notice
Precautions ................................................................................. 2
Introduction
About the Product ....................................................................... 3
Package Overview ...................................................................... 4
Installation
Product Overview........................................................................ 5
Start Your Installation .................................................................. 8
User Controls
Front Panel Controls ................................................................... 11
How to Use the OSD Menus ....................................................... 12
On-Screen Display Menus.......................................................... 13
Appendices
Troubleshooting ........................................................................... 14
Warning Signal ............................................................................ 15
16
17
18
Product Dimensions....................................................................
Compatibility Modes ...................................................................
Pivot Software Installation...........................................................
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Usage Notice
Warning- To prevent the risk of fire or shock hazards, do not
expose this product to rain or moisture.
Warning- Please do not open or disassemble the product as this
may cause electric shock.
Precautions
Follow all warnings, precautions and maintenance as recommended
in this user’s manual to maximize the life of your unit.
Do:
q Turn off the product before cleaning.
q Use only a dry soft cloth or clean room wiper when cleaning the
LCD Display screen surface.
q Use a soft cloth moistened with mild detergent to clean the display
housing.
q Use only a high quality and safety approved AC/DC power adapter.
q Disconnect the power plug from the AC outlet if the product is not
going to be used for an extended period of time.
Don’t:
q Do not touch the LCD Display screen surface with sharp or hard
objects.
q Do not use abrasive cleaners, waxes or solvents for your cleaning.
q Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- Place in direct sunlight.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Introduction
About the Product
Having a 21.3” LCD dsiplay with an active matrix, thin-film transistor (TFT)
liquid crystal display (LCD), this product also demonstrate the following
outstanding features.
q Dual Analog and Digital signal input
q 21.3” diagonal screen size
q 1600 x 1200 high resolution
q Wide Viewing Angle Technology
q 31.5 ~ 91.1 kHz horizontal scan
q 56 ~ 85 Hz refresh rate
q Auto Adjustment and Re-scaling function
q High quality full screen re-scaling capability
q Multilingual OSD user controls
q VESA DPMS power saving
q Video capability
q Audio capability
q Kensington lock capability
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Package Overview
LCD Display
Power Adapter
Power Cord
VGA Signal Cable
DVI-D Cable
Video Cable
Audio-In Cable
User’s Guide
S-Video Cable
Pivot Software
Landing Strip
( Optional )
Register Your Planar Products Today
Thank you for choosing Planar. To assure you receive all the benefits of
your Planar product and services, register your Planar product today. Visit
our website to register your product at
Cables, Replacement Lamps and Accessories
To find cables, replacement lamps and accessories for your Planar projector,
LCD monitor, touchscreen or other Planar products visit our online store at
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Installation
Product Overview
u
Front View
Liquid Crystal Display
(LCDDisplay)
Panel
Controls
Stand
u
Back View
Kensington Security
Lock Slot
Connector Ports (Inside the back cover)
VID EO
S-VID EO
Audio
DVI Input
Port
S-Video
DC-In
Composite
Video
Analog
Input Port
Download from Www.Somanuals.com. All Manuals Search And Download.
6
u
Tilt
Grasp the LCD Display with both hands and adjust the tilt as desired.
Tilt Angle:-5° ~ 35°
u
Kensington Security Slot
The monitor can be secured to your desk or any other fixed object with
Kensington lock security products. Kensington lock is not included.
Kensington Security Slot
Download from Www.Somanuals.com. All Manuals Search And Download.
7
u
VESA Mount on your monitor
This monitor conforms to the VESA Flat Panel Mounting Physical
Mounting Interface Standard which defines a physical mounting interface
for flat panel monitors, and corresponding standards for flat panel monitor
mounting devices, such as wall and table arms.The VESA mounting
interface is located on the back of your monitor.
The VESA Mounting slots of this model are located inside the rear cover
(shown in the following figure).
To mount the monitor on a swing arm or other mounting fixture, follow
the instruction included with the mounting fixture to be used.
Slots
100mm
100mm
VESA
Mounting
Interface
Warning!
Please select the proper screws!
The depth from plastic back cover to the bottom of the screw hole is
8mm.The spec is M4 screw.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Start Your Installation
u
Connecting the Display (Figure 10.1)
To setup this display, please refer to the following figure and procedures.
1. Be sure all equipment is turned off.
2. Connect the DC power cord to the power connector; plug one end of the
AC power cord into the power adapter, and the other end into an
electrical outlet(Œ).
3. For the PC with Analog output: Connect the VGA signal cable from
display VGA input connector to the 15-pin connector of your host
computer and tighten the screws().
4. For the PC with DVI digital output: Connect the DVI signal cable to the
connector of the display card in your computer; connect the other side to
the DVI-D input port of your display. Tighten the screws(Ž).
5. If your video source uses a round, four-prong S-Video connector,
please use the S-Video cable().
6. If your video source uses a round, one-prong composite video connector,
please use the video cable().
7. If your audio source uses a round, one-prong composite audio connector,
please use the audio cable(‘).
8. Turn on your computer, display and video source.
Notice:To ensure the LCD Display will work well with your computer,please
configure the display mode of your graphics card to make it less than or
equal to 1600 x 1200 resolution and make sure the timing of the display
mode is compatible with the LCD screen. We have listed the “Compatibility
Modes” of this LCD screen in appendices for your reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Figure 10.1
Video Cable
‘
Audio Cable
S-Video Cable
V ID EO
S -V ID EO
VGA
Œ
Power
Adapter
& Power
Cord
Cable
Ž
DVI-D
Cable
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
11
User Controls
Front Panel Controls
Œ
‘
Ž
No / Icon
Control
Menu button
Function
MENU
To pop the OSD menus.
Œ
To select the adjustment items
from OSD menus.
To activate the "Auto adjustment"
function to obtain an optimum
image.
SELECT
Select/Auto
1. Decreases the brightness of
the display image.
2. Decreases the value of the
adjustment items.
Brightness Minus/Minus
Brightness Plus/Plus
Ž
3
4
1. Increases the brightness of
the display image.
2. Increases the value of the
adjustment items.
1. Green indicates the display is
turned on.
2. Amber indicates the display
is in power-save mode.
Power LED
‘
Switches On/Off the power to the
LCD Display.
Power Switch
Download from Www.Somanuals.com. All Manuals Search And Download.
12
How to Use the OSD Menus
1. Press the “MENU” button to pop up the “on-screen menu” and to
select among the four Main Menus.
2. Choose the adjustment items by pressing the “SELECT” button.
3. Adjust the value of the adjustment items by pressing the “
”
3
or “ ” button.
4
4. After a period of inactivity.*(base on a user setting) the OSD menus
will automatically disappear.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
On-Screen Display Menus
Main Menu
Menu Level 1
Menu Level 2
Brightness
Description
ADJ Scale
0 ~ 100
0 ~ 100
-45+45
To adjust the brightness.
Contrast
Hue
To adjust the contrast of the image.
Adjusts the red-green color balance of the image.
DISPLAY
Saturation
Adjusts the image from black and white to full saturated colour.
0 ~ 100
Flesh-tone
Black Level *
Scaling
off/Week/Soft/Strong
To adjust black level of the image
1:1/Full/Aspect
0 ~ 100
Auto Adjust *
Select
Synchoronizes the signal timing of the display to that of the
graphics card. When you experience an unstable to flickering
image,use this function to make an adjustment.
Phase *
Clock *
0 ~ 255
0 ~ 255
IMAGE
Changes the displays data frequency to match the frequency of
your graphics card. When you experience a vertical flickering
bar,use this function to make an adjustment.
Icon 1
Sharpness **
Zoom
Adjusts the sharpness of the image.
In/Out
Zoom Horizontal Pan
Zoom Vertical Pan
Vertical *
Left/Right
POSITION
Up/Down
Changes the vertical position of the image
Changes the horizontal position of the image
On/Off
0 ~ 255
0 ~ 255
Horizontal *
sRGB
Gamma Correction
Color Temperature
Red
Off/1.8/2.2
User / 6500k / 9300k
COLOR
Adjusts Red colour intensity
Adjusts Green colour intensity
Adjusts Blue colour intensty
Allows you to select PIP, PAP model, or Off.
Allows you to adjust size of display ( Small/Med./Large )
Changes the vertical position of the PIP window
Changes the horizontal position of the PIP window
0 ~ 255
0 ~ 255
0 ~ 255
Green
Blue
PIP Mode
PIP Size
PIP CONTROL
Vertical
0 ~ 100
0 ~ 100
Horizontal
Icon 2
Icon 3
Allows you to choose the signal ( VGA/DVT/Composite/S-Video )
Vertical
Adjusts the vertical position of the OSD
0 ~ 255
0 ~ 255
0 ~ 10
Horizontal
Transparency
Adjusts the horizontal position of the OSD
Changes the opaqueness of the OSD background.
Time out
Adjusts the amount of time the OSD menu remains to display
On/Off
5 ~ 60
OSD Zoom
Allow you to choose the OSD menu language (
Icon 4
English/Chinese/Japanese/French/German/Spanish/Italian/Korean
)
To return the display parameters of the current mode to their
factory default settings.
Icon 5
Icon 6
Factory Reset
Volume
Mute
To adjust the sound volume.
0 ~ 50
Allows you to disable the sound immediately.
Note : The symbol ( * ) means the VGA signal only
The symbol ( ** ) means the VGA/Composite/S-Video signal
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Appendix
Troubleshooting
If you are experiencing trouble with the LCD display, refer to the
following trouble shooting. If the problem persists, please contact
your local dealer or our service center.
Problem: No image appears on screen.
Check that all the I/O and power connectors are correctly and
4
well connected as described in the “Installation” section.
Make sure the pins of the connectors are not crooked or broken.
4
Problem: Partial image or incorrectly displayed image.
Check to see if the resolution of your computer is higher than that of the
LCD Display.
4
Reconfigure the resolution of your computer to make it less than or equal
4
to 1600 x 1200.
Problem: Image has vertical flickering line bars.
Use “Frequency” to make an adjustment.
4
Check and reconfigure the display mode of the vertical refresh rate of your
graphics card to make it compatible with the LCD Display.
4
Problem: Image is unstable and flickering
Use “Tracking” to make an adjustment.
4
Problem: Image is scrolling
Check and make sure the VGA signal cable (or adapter) is well connected.
4
Check and reconfigure the display mode of the vertical refresh rate of
your graphics card to make it compatible with the LCD Display.
4
Problem: Vague image (characters and graphics)
Use “Frequency” to make an adjustment. If this problem still exists,
use “Tracking” to make an adjustment.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Warning Signal
Sometimes you may see warning messages for this LCD Display.
This means that the LCD Display cannot correctly receive the signal
from the computer graphics card.
4No Signal
This message means that the LCD Display has been powered on but it
cannot receive any signal from the computer graphics card. Check all the
power switches, power cables, and VGA signal cable.
4Out Of Range
This message means that the signal of the computer graphics card is not
compatible with the LCD Display. When the signal is not included in the
compatibility mode we have listed in the Appendices of this manual, the
LCD Display will show this message.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Product Dimensions
482.28 mm / 18.98”
533.14mm/20.98”
Front View
64.5mm/2.54”
Side View
222.00mm/8.74”
Top View
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Compatibility Modes
Mode
Resolution
640 x 350
640 x 480
720 x 400
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 1024
1600 x 1200
640 x 480
640 x 480
832 x 624
1024 x 768
1152 x 900
1152 x 900
Frequency (Hz)
H. Frequency (kHz)
31.5
IBM VGA
70
60
70
72
75
85
56
60
72
75
85
60
70
75
85
75
60
75
85
60
67
67
75
75
66
76
IBM VGA
31.5
IBM VGA
31.5
VESA VGA
VESA VGA
VESA VGA
VESA SVGA
VESA SVGA
VESA SVGA
VESA SVGA
VESA SVGA
VESA XGA
VESA XGA
VESA XGA
VESA XGA
VESA
37.9
37.5
43.3
35.1
37.9
48.1
46.9
53.7
48.4
56.5
60.0
68.7
67.5
VESA SXGA
VESA SXGA
VESA SXGA
VESA UXGA
Apple Mac
Apple Mac
Apple Mac
Apple Mac
SunMicro
64.0
80
91.1
75.0
34.9
35.0
49.7
60.2
61.8
SunMicro
71.1
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Pivot Software Installation
Follows are the procedures for pivot software set up.
1. Insert the Pivot Pro CD-ROM into the CD-ROM driver.
2. Run the Start_Pivot program and select the pivot option to install
portrait displays’ software on your computer.
3. Restart your computer. To Change orientation, right click anywhere on
the desktop and select Rotate 0, 90, 180, or 270 from the menu. Now
hold the edges of your display and rotate it.
4. Start exploring the benefits of your new portrait monitor. Web pages,
E-mail, reports and letters are best viewed in portrait orientation. They
can be viewed and edited without the need to scroll the page.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Planar Systems, Inc
1195 NW Compton Drive
Beaverton, OR 97006-1992
© 2006 Planar Systems, Inc.
Planar is a registered trademark of Planar Systems, Inc. Other brands and
names are the property of their respective owners. Technical information in
this document is subject to change without notice.
P/N:36.61604G002 Rev.D
020-0454-00A
Download from Www.Somanuals.com. All Manuals Search And Download.
|