Planar Car Video System PE150 User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Preface ...............................................................................................................................1  
Chapter 1 Installation........................................................................................................2  
Unpacking............................................................................................................................................. 2  
Connecting the LCD Monitor and Base ................................................................................................ 2  
Viewing Angle Adjustment................................................................................................................... 2  
Detaching LCD Monitor from Its Stand................................................................................................ 3  
Interface for Arm Applications ............................................................................................................. 3  
Connecting the Display to your Computer ............................................................................................ 3  
Connecting the AC Power ..................................................................................................................... 3  
Setting Up the LCD Monitor................................................................................................................. 3  
Power Management System .................................................................................................................. 4  
Chapter 2 Display Controls ...............................................................................................4  
User Controls ........................................................................................................................................ 4  
Adjusting the Monitor's Display............................................................................................................ 4  
Function Description............................................................................................................................. 5  
Chapter 3 Technical Information .....................................................................................6  
Specifications........................................................................................................................................ 6  
Standard Timing Table.......................................................................................................................... 7  
Troubleshooting .................................................................................................................................... 8  
Preface  
This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has  
been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The  
information in this document is subject to change without notice. This document contains proprietary information  
protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical,  
electronic or other means, in any form, without prior written permission of the manufacturer.  
FCC Statement Warning  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed  
and used in accordance with the instruction, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,  
the user is encouraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Any changes or modifications not expressly approved by the manufacturers may void the user's authority to  
operate this equipment.  
NOTE  
A shielded-type signal cord is required in order to meet the FCC emission limits and also to prevent interference  
to the radio and television reception. It is essential that only the supplied signal cord be used.  
Canadian DOC Notice  
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing  
Equipment Regulations.  
Cet appareil numérique de la classe B repecte toutes les exigences du Règlement sur le matériel  
brouilleur du Canada.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Important Safety Instructions  
Please read the following instructions carefully. This manual should be retained for future use.  
1. To clean LCD Monitor screen;  
-- Power off LCD Monitor and unplug the AC Cord.  
-- Spray a non-solvent cleaning solution onto a rag.  
-- Gently clean the screen with dampened rag.  
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or sunlight can  
severely damage it.  
3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.  
4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be  
performed by an authorized technician.  
5. Store LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD  
Monitor outside this range could result in permanent damage.  
6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.  
*
*
*
Monitor to PC signal cable is frayed or damaged.  
Liquid spilled into LCD Monitor or the monitor has been exposed to rain.  
LCD Monitor or the case is damaged.  
7. A certified line is required to connect this device to a power outlet. For a nominal current up to 6A and a device  
weight above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm2 must be used.  
Chapter 1 Installation  
Unpacking  
Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer.  
You need a stable and clean surface near a wall power outlet. Make sure that LCD Monitor has  
enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some  
ventilation is needed to ensure that the Monitor does not become too hot.  
After you unpack the LCD Monitor, make sure that the following items were included in the box:  
*
*
*
LCD Monitor  
1.5M Monitor-to-PC signal Cable  
Base  
*
*
User's Manual  
1.8M Power Cord  
If you find that any of these items is missing or appears damaged, contact your dealer immediately.  
Connecting the LCD Monitor and Base  
When you open the box to take the base and put on  
the desk first. Then connect the LCD Monitor and  
base please.(See fig.1-1 )  
Figure 1-1  
Viewing Angle Adjustment  
The LCD Monitor is designed to allow users to have  
a comfortable viewing angle. The viewing angle can  
be adjusted from -5°to +30°.(See fig. 1-2)  
Figure 1-2  
Warning  
Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting  
this will result in damaging the Monitor and Monitor stand.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Detaching LCD Monitor from Its Stand  
1. Unscrew screws of the hinge bracket  
2. Remove the stand from LCD monitor  
(See fig. 1-3)  
Figure 1-3  
Interface for Arm Applications  
Before installing to mounting device, please refer to  
Fig.1-3.  
The rear of this LCD display has four integrated 4 mm, 0.7  
pitches threaded nuts, as well as four 5 mm access holes in  
the plastic covering as illustrated in Figure 1-4. These  
specifications meet the VESA Flat Panel Monitor  
Physical Mounting Interface Standard (paragraphs 2.1  
and 2.1.3, version 1, dated 13 November 1997).  
Figure 1-4  
Connecting the Display to your Computer  
1. Power off your computer.  
2. Connect the signal cable to the VGA port on your PC.  
3. Make sure connection are secure.  
Figure 1-5  
Attention  
This device must be connected to an off-the-shelf video cable in order to comply with FCC  
regulations. A ferrite-core interface cable is included in the LCD Monitor package.  
This device will not be in compliance with FCC regulations when a non-ferrite-core video cable is  
used.  
Connecting the AC Power  
1. Connect the power cord to the Monitor AC socket.  
(See Fig. 1-6)  
2. Connect the plug Pin of power cord to an AC power  
source.  
Figure 1-6  
Setting Up the LCD Monitor  
1. Make sure the AC power cord is connected to the LCD Monitor.  
2. Turn on the LCD Monitor's power switch, located on the bezel of the monitor.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Power Management System  
This LCD Monitor complies with the VESA DPMS (version 1.0) Power Management guidelines. The  
VESA DPMS provides four power saving modes through detecting a horizontal or vertical sync.  
signal.  
When the LCD Monitor is in power saving mode, the monitor screen will be blank and the power  
LED indicator will light yellow.  
Chapter 2 Display Controls  
User Controls  
A brief description and the location of all LCD Monitor function controls and indicators:  
Figure 2-1  
Press the power switch to switch the monitor ON/OFF.  
1
2
DC Power Switch  
LED lights Green color --- Power is ON.  
LED lights Yellow --- Monitor is in "Power Saving Mode".  
LED is off --- Power is OFF.  
DC Power-On  
Indicator  
Press either left or right control button for OSD (On Screen Display)  
menu selection.  
Press the left button to decrease the OSD setting and press the right  
button to increase the OSD setting.  
Function Select  
Buttons  
Adjustment Control  
Buttons  
3
4
Adjusting the Monitor's Display  
The monitor has four function control buttons to select among functions shown on OSD  
menu, designed for easy user-viewing environments.  
OSD Function Menu  
To access OSD Main menu, simply press one of  
the Function Select control buttons, and the menu  
diagram will pop up on the screen as shown on Fig.  
2-2:  
Continue pressing the Function Select buttons to  
scroll through the entire menu items ,then press  
Adjustment Control buttons to adjust content of  
selected item.  
Figure 2-2  
Attention  
Firmware revision may have been updated into a latest version while the version number shown on  
all OSD menus in this manual will stay as Ver. 1.00MHB.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Function Description  
Icon  
Function  
Function Description  
Brightness  
This function increases or decreases the brightness of the image.  
This function increases or decreases the difference between the dark and light  
color.  
Contrast  
H-Position  
V-Position  
This function shifts the entire display image left or right.  
This function shifts the entire display image up or down.  
A total of 32 scales (0 to 100) are available to adjust the focus and clarity of  
the display.  
Phase  
Clock  
This function carries a frequency tracking feature that offers the user to have  
better stability and clarity. Increasing Clock value can be up to +127 scales.  
The number of decreasing Clock (minus) is depend on the input timing.  
Auto Adjustment This function will adjust the display size automatically to fit full screen.  
OSD H-Position This function moves the OSD menu window left or right.  
OSD V-Position This function moves the OSD menu window up or down.  
This function is to choose a display that allows maximum graphics text  
quality. The resolution selection can either be 640 x 400 or  
Graph Text  
720 x 400. Please refer to Chapter 3 “ Standard Timing” Table for of  
different timing modes.  
The recall function will return all adjusted parameters to factory preset  
Recall  
values.  
Five OSD language options are available:  
Language  
English, German, French, Spanish and Italian.  
Press the left or right Adjustment Control button to select other language.  
Color  
Color Temp.: Push the (+ -) button to select a different color temperature.  
Please see the diagram below for function and description.  
Temperature  
Save Exit  
Saves the values of this setting and exits the OSD menu function.  
Icon  
Function  
Description  
CIE coordinated Color Temperature of  
9300°K  
Sets the CIE coordinate color temperature to  
9300°K  
9300  
SRGB  
User  
CIE coordinated Color Temperature of  
SRGB°K  
Sets the CIE coordinate color temperature to  
SRGB°K  
Three colors (Red, Green, Blue) can be Sets the settings to a by user defined CIE  
adjusted from the OSD menu Temperature.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Chapter 3 Technical Information  
Specifications  
LCD Panel  
Size  
Hannstar  
15.0" (38 cm)  
Display Type  
Resolution  
Active matrix color TFT LCD  
1024 x 768  
Display Dot  
Display Area (mm)  
Display Color  
Brightness  
Contrast Ratio  
Response Time  
Lamp Voltage  
Lamp Current  
Viewing Angle  
1024 x (RGB) x 768  
304 x 228 (H x V)  
262K  
200 cd/m2 (typical)  
400:1 (typical)  
35 ms (typical)  
730 Vrms (typical)  
6.5 mA rms. (typical)  
Vertical: -55° ~ +45°  
Horizontal: -65° ~ +65°  
Display Colors  
Video  
Input Signal  
16.7M with FRC or Dithering  
Analog RGB 0.7Vp-p  
Input Impedance  
Polarity  
75 Ohm ± 2%  
Positive, Negative  
Amplitude  
Multi-mode Supported  
(0 - 0.7)-0.035V/+0.07V  
Horizontal Frequency: 24 ~ 61 KHz  
Vertical Frequency: 55 ~ 75 Hz  
Control  
Power  
On/Off switch with LED indicator  
OSD  
Brightness  
Contrast  
Digital  
Digital  
Horizontal Position  
Vertical Position  
Phase  
Digital  
Digital  
Digital  
Clock  
Digital  
Display Mode Setup  
OSD Format  
Use EEPROM to save settings in memory  
20 characters x 9 rows  
Power Management  
Mode  
Power Consumption*  
AC Input  
LED Color  
On  
Standby  
Suspend  
Off  
30W maximum  
240 VAC  
240 VAC  
240 VAC  
240 VAC  
240 VAC  
Green  
Yellow  
Yellow  
Yellow  
Dark  
3W maximum  
3W maximum  
3W maximum  
3W maximum  
DC Power Off  
Yellow: Standby, Suspend, Off  
Dark: DC Power off  
Disconnected  
3W maximum  
240 VAC  
* Meeting VESA DPMS requirements measured from AC Input end of AC adapter.  
Sync Input  
Signal  
Separate TTL compatible horizontal and vertical synchronization  
Polarity  
Positive and negative  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
Plug & Play  
Supports VESA DDC1 and DDC2B functions  
External Connection  
Power Input (AC input)  
Video Cable  
AC socket  
1.5M with 15-pin D-sub connector  
Environment  
Operating Condition:  
Temperature  
5°C to 40°C/41°F to 104°F  
Relative Humidity 20% to 80%  
Temperature  
-20°C to 60° C/-4°F to140° F  
Storage Condition:  
Relative Humidity 5% to 85%  
Power Supply (AC Input)  
Input Voltage  
Input Current  
Single phase, 100 ~ 240VAC, 50 / 60 Hz  
1.5 A maximum  
Size and Weight  
Dimensions  
Net Weight  
Gross Weight  
353 (W) x 346 (H) x 204 (D) mm  
3 ± 0.3 kg (6.6 ± 0.66lbs)  
4.5 ± 0.3 kg (9.9 ± 0.66lbs)  
Pin Assignment  
6
Signal  
Signal  
Description  
PIN  
Description  
PIN  
1
2
3
4
5
6
7
8
Red  
Green  
Blue  
Digital GND  
Digital GND  
Red Rtn  
Green Rtn  
Blue Rtn  
9
+5V  
11  
1
5
10  
11  
12  
13  
14  
15  
PC Detect  
Digital GND  
SDA  
H. Sync.  
V. Sync.  
SCL  
15  
10  
Standard Timing Table  
If the selected timing is NOT included in table below, this LCD monitor will use the most suitable  
available timing.  
H. Freq.  
V. Freq.  
Pixel Freq.  
H/V Sync.  
Polarity  
Resolution  
Mode  
VGA-350  
(KHz)  
31.469  
24.830  
(Hz)  
70.087  
56.420  
(MHz)  
25.175  
21.050  
640 x 350  
640 x 400  
+/-  
-/-  
NEC PC9801  
VGA-400-GRAPH NEC  
PC9821  
640 x 400  
31.469  
70.087  
25.175  
-/+,-/-  
640 x 480  
640 x 480  
640 x 480  
720 x 400  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
832 x 624  
1024x 768  
1024x 768  
1024x 768  
1024x 768  
31.469  
37.861  
37.500  
31.469  
35.156  
37.879  
48.077  
46.875  
49.725  
48.363  
53.964  
56.476  
60.023  
59.940  
72.809  
75.000  
70.087  
56.250  
60.317  
72.188  
75.000  
74.55  
60.004  
66.132  
70.069  
75.029  
25.175  
31.500  
31.500  
28.322  
36.000  
40.000  
50.000  
49.500  
57.2832  
65.000  
71.664  
75.000  
78.750  
-/-  
-/-  
-/-  
-/+  
+/+  
+/+  
+/+  
+/+  
-/-  
VGA-480  
VESA - 480 - 72Hz  
VESA - 480 - 75Hz  
VESA-400-TEXT  
SVGA  
VESA-600-60 Hz  
VESA-600-72 Hz  
VESA-600-75 Hz  
APPLE MAC-800  
XGA  
-/-  
+/+  
-/-  
COMPAQ-XGA  
VESA-768-70 Hz  
VESA-768-75 Hz  
+/+  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Troubleshooting  
This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing  
differences among various VGA cards in the market, users may initially experience an unstable or  
unclear display whenever a new display mode or new VGA card is selected.  
Attention  
This LCD Monitor Supports Multiple VGA Modes.  
Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.  
PROBLEM  
Picture is unclear and unstable  
The picture is unclear and unstable, please perform the following steps :  
1. Enter PC to “Shut Down Windows” status while you’re in MS-Windows environment.  
2. Check the screen to see if there’s any black vertical stripes appear. If there are, take advantage of  
the “Clock” function in OSD menu and adjust (by increment or decrement numbers) until those  
bars disappear.  
3. Move to “Phase” function in OSD menu again and adjust the monitor screen to its most clear  
display.  
4. Click “No” on “Shut Down Windows” and back to the normal PC operating environment.  
PROBLEM  
There is no picture on LCD Monitor  
If there’s no picture on the LCD Monitor, please perform the following steps:  
1. Make sure the power indicator on the LCD Monitor is ON, all connections are secured, and the  
system is running on the correct timing. Refer to Chapter 3 for information on timing.  
2. Turn off the LCD Monitor and then turn it back on again. If there is still no picture, press the  
Adjustment Control button several times.  
3. If step 2 doesn’t work, connect your PC system to another external CRT. If your PC system  
Functions properly with a CRT Monitor but it does not function with the LCD Monitor, the output  
timing of the VGA card may be out of the LCD’s synchronous range. Please change to an  
alternative mode listed in the Standard Timing Table or replace the VGA card, and then repeat  
steps 1 and 2.  
PROBLEM  
There is no picture on LCD Monitor  
If you have chosen an output timing that is outside of the LCD Monitor’s synchronous range  
(Horizontal: 24 ~ 61 KHz and Vertical: 56 ~ 75 Hz), the OSD will display a “Out of Range” message.  
Choose a mode that is supported by your LCD Monitor.  
Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will  
display a message “No Input Signal”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8

Peavey Portable Speaker SP 118X User Manual
Pentair Universal Remote QT4 User Manual
Philips Clock Radio AE3300 User Manual
Philips Computer Monitor 107B20 User Manual
Philips Security Camera 28PW9505 User Manual
Pioneer DVR RCS LX60D User Manual
Plasmon Computer Hardware FS3102 User Manual
Poulan Snow Blower PP927ESA User Manual
Primera Technology Printer XI User Manual
PYLE Audio Microphone PDWM94 User Manual