FILE-TYPE COMPACT DISC PLAYER
PD-F1009
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
–
–
–
–
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Inform ation to User
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.
Thank you for buying this Pioneer product.
[For Canadian m odel]
Please read through these operating instructions so you
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT
will know how to operate your model properly. After you
USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
have finished reading the instructions, put them away in a
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
safe place for future reference.
CAN BE FULLY INSERTED TO PREVENT BLADE EXPO-
SURE.
CONTENTS
ATTENTION: POUR PREVENIR LES CHOCS ELEC-
TRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC
BEFORE YOU USE THE PLAYER ....................................... 4
UN PROLONGATEUR, UNE PRISE DE COURANT OU UNE
CAUTIONS REGARDING HANDLING ................................. 5
AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEU-
VENT ETRE INSEREES A FOND SANS EN LAISSER AU-
CUNE PARTIE A DECOUVERT.
CONNECTIONS .................................................................. 6
NAMES OF PARTS ............................................................. 7
HOW TO LOAD THE DISCS ............................................... 9
BASIC OPERATIONS
To listen in order from the first track............................. 10
CAUTION
To select the disc and track .......................................... 10
To select a play mode ................................................... 10
Playing a disc that is not loaded in the rack .................. 11
To play a track you want to hear ................................... 11
To start playback from a specific disc ........................... 11
Opening or closing the hood during playback ............... 11
This product satisfies FCC regulations when shielded cables and
connectors are used to connect the unit to other equipment. To
prevent electromagnetic interference with electric appliances
such as radios and televisions, use shielded cables and connec-
tors for connections.
VARIOUS OPERATIONS
To program and play only the discs you want to hear... 12
To repeat playback ........................................................ 13
To store your favorite tracks ......................................... 13
To find out which discs you’ve listened to recently ...... 14
To playback tracks/discs at random .............................. 14
To program tracks/discs in a desired order ................... 15
To scan quickly through tracks on a disc ....................... 16
To use the DISPLAY button .......................................... 17
[For Canadian m odel]
This Class B digital apparatus complies with Canadian ICES-
003.
[Pour le m odèle Canadien]
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
TROUBLESHOOTING ....................................................... 18
SPECIFICATIONS .............................................................. 19
This playeris forconsumeruse. Ifthe playeris used in a business
(for example, used for a long period at a restaurant), the player
will not be covered under warranty. CD video, VIDEO CD, CD
graphics and CD-ROM discs can not be played with this player.
Location
Condensation
Install the player in a w ell-ventilated location w here it w ill not be
exposed to high tem peratures or hum idity.
When this unit is brought into a warm room from previously cold
surroundings or when the room temperature rises sharply, con-
densation may form inside, and the unit may not be able to attain
its full performance. If this occurs, allow the unit to stand for
about an hour or raise the room temperature gradually.
Do not install the player in a location which is exposed to direct
rays of the sun, or near stoves or radiators. Excessive heat can
adversely affect the cabinet and internal components. Installation
of the player in a damp or dusty environment may also result in a
malfunction or an accident. (Avoid installation near cookers etc.,
where the player may be exposed to oily smoke, steam or heat.)
Do not install the player on a tottered stand nor in an unstable or
inclined place.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU USE THE PLAYER
HERE’S WHAT YOU CAN DO!
301 CD giga changer for the com pact 16 inch w idth
The new roulette-type m echanism allows for a capacity of 301 CDs.
One-disc jum p-in playback thanks to a single loader slot
The PD-F1009 is equipped with a single loader that lets you easily play a disc that is not loaded in the rack. What's
m ore, a priority key m akes for excellent operability of the jum p-in play function.
Com patible w ith recordable CDs
As well as regular CDs, this unit can play CD-R and CD-RW discs.
CD TEXT com patible
The disc titles are displayed while playing CD TEXT disc.
Many handy functions for taking m axim um advantage of the changer
The PD-F1009 is equipped with three listening m odes (ALL, SINGLE and CUSTOM) with 5 custom files, as well as a
direct button for even greater operability. What's m ore, a jog dial on the m ain unit m akes it even easier to select
discs and so on.
Disc detection function
When the hood is closed, the set autom atically detects whether or not a disc is loaded.
Energy-saving design
This unit is designed to use 1W of energy when this player is in standby m ode.
PUT BATTERIES INTO THE REMOTE
CONTROL UNIT
CONFIRM SUPPLIED ACCESSORIES
Remote control
Audio cable x 1
unit x 1
HI-LITE PREVIOUS BEST
REPEAT MODE PROGRAM CLEAR
1
4
2
5
8
0
3
DISPLAY
6
9
7
Open the lid of the battery compartment on the rear of the remote
control unit, and insert the batteries, taking care to align the ª and
· polarities correctly.
DISC
TRACK
DISC
–
+
1
7
SEARCH¡
4
3
ASMS
¢
Control cable x 1
RANDOM
8
FILE-TYPE CD PLAYER
REMOTE CONTROL UNIT
Notes!!
Î
•
In order to prevent battery leakage, remove the batteries when
not using the remote control unit for an extended period (one
month or more). If leakage occurs, carefully wipe away any
battery fluid inside the compartment, and replace the batteries
with new ones.
•
Do not allow books or other objects to rest on top of the re-
mote control unit, since the buttons may be depressed, causing
faster exhaustion of the batteries.
Size AA/R6P dry cell
batteries x 2
Incorrect use of batteries may cause leakage or rupture.
Always be sure to follow these guidelines:
A. Always insert batteries into the battery compartment
correctly matching the positive ª and negative ·
polarities, as shown by the display inside the compart-
ment.
Other included items
• Warranty card
• Operating Instructions
(this manual)
B. Never mix new and used batteries.
C. Batteries of the same size may have different voltages,
depending on brand. Do not mix different brands of
batteries.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS REGARDING HANDLING
Precautions regarding installation
With this player, use discs w hich display the m ark
show n below . (Optical audio digital discs.)
•
•
Placing and using the compact disc player for long periods on
heat-generating sources such as amplifiers will affect perfor-
mance. Avoid placing the player on heat-generating sources.
Install this compact disc player as far as possible from tuners
and TV sets. A compact disc player installed in close proximity
to such equipment may cause noise or degrada-
tion of the picture.
'
•
•
Such noise may be particularly noticeable when
an indoor antenna is used. In such cases, make
use of an outdoor antenna, or turn off power to
the compact disc player.
Playing CD-R and CD-RW discs in this CD changer
•
This unit can play CD-R and CD-RW discs. However, it may not
be possible to play unfinalized discs* which have very little
recording time left on them.
Please place this unit on a level surface.
Cleaning the player
* What is finalization?
Finalizing a CD-R or CD-RW disc means making a recorded disc
playable on an ordinary CD player. In the case of CD-RWs, the
player must be specifically compatible with CD-RW discs for it
to play them.
To clean the PLAYER, wipe with a soft, dry cloth. For stubborn dirt,
wet a soft cloth with a mild detergent solution made by diluting
one part detergent to 5 or 6 parts water, wring well, then wipe off
the dirt. Also use a dry cloth to wipe the surface dry. Do not use
volatile liquids such as benzene and thinner which are harmful to
the unit.
•
•
•
•
When holding discs, do not touch their signal surfaces. Hold by
the edges, or by one edge and the center hole.
Do not affix gummed labels or tape to the label surfaces. Also,
do not scratch or damage the label.
Discs rotate at high speed inside the player. Do not use
damaged (cracked or warped) discs.
Do not play a CD with a special shape (having other shape than
a circular disc, such as a heart shaped disc). Otherwise
malfunction may occur.
The CD accessories (stabilizer protection sheet, protection ring,
etc.) which are marketed for improving the sound quality or
protecting discs as well as the disc cleaner should not be used
with this system because they may cause malfunction.
Storing discs
•
•
Discs are made of the same kinds of plastic used for conven-
tional analog audio records. Be careful not to allow discs to
warp; always store discs in their cases vertically, avoiding
locations with high heat or humidity, or extremely low tempera-
tures. Avoid leaving discs in cars, since the seat of a car in
direct sunlight can become unbelievably hot.
•
Always read and abide by the precautionary notes listed on disc
labels.
CD lens cleaner
The player's pickup lens should not become dirty in normal use,
but if for some reason it should malfunction due to soiling, consult
your nearest PIONEER authorized service center. Lens cleaners for
CD players are commercially available, but special care should be
exercised in their use since some may cause damage to the lens.
Cleaning and handling com pact discs
Re-transporting
•
The presence of fingerprints or smudges on the surface of the
disc will not directly affect the recorded signals, but depending
on the degree of contamination, the brightness of the light
reflected from the signal surfaces may be reduced, causing
degradation of sound quality. Always keep your discs clean by
wiping them gently with a soft cloth from the inner edge toward
the outer periphery.
When transporting this unit in the future, remove all discs from the
rack. Turn off the STANDBY/ON switch, wait for "OFF" to go out
from the display. Then unplug the power cord.
Precautions concerning use of optical fiber cables
•
•
Fully insert the optical fiber cable plugs all the way into the
jacks.
Be careful not to fold or crimp the cable. When coiling an optical
fiber cable for storage, make sure the diameter of the coil is 15
cm (5-14/16 in.) or larger.
•
•
•
Use an optical fiber cable with a length of 3 m (10 ft.) or less.
Protect the optical fiber cable plugs from scratches and dust.
When the unit is not connected using an optical fiber cable, be
sure to keep the protective dust cap plugged into the optical
digital output jack at all times.
•
•
If a disc becomes very dirty, dip a soft cloth in water, and after
wringing it out well, wipe the dirt away gently, and then remove
any water drops with another soft, dry cloth.
Do not use record cleaning sprays or anti-static agents on discs.
Also, never clean discs with benzene, thinner, or other volatile
solvents, since damage to the disc surface may result.
More than
15 cm
Record
cleaning
sprays
(5-14/16 in)
Benzene
Thinner
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS
Before m aking or changing the connections, sw itch off the pow er and disconnect the pow er cord from the AC outlet.
Stereo amplifier
C D
R
CONTROL
OUT
DIGITAL
OPTICAL IN
L
L
R
Red
White
Control cable
To the CONTROL IN jack of the
Pioneer component bearing
the Î mark.
C
Audio cable
A-1
C
Optical fiber
cable
B
Red
White
R
L
IN
OUT
OPTICAL
DIGITAL OUT
R
L
LINE OUT
CONTROL
IN
OUT
OPTICAL
R
L
LINE OUT
CONTROL
DIGITAL OUT
PD-F1009
A-2
Power cord
C System rem ote control w ith a Pioneer stereo
A Making connections
1 Connect the LINE OUT jacks of this unit to the input jacks (CD
or AUX) of the amplifier. Make sure that the white plugs are
connected to the left (L) jacks and the red plugs to the right (R)
jacks.
am plifier that has the Î m ark
When a Pioneer stereo amplifier bearing the Î mark is used,
connect the CONTROL IN jack on the rear panel of the CD player
to the CONTROL OUT jack of the amplifier. This will enable the
CD player to be controlled using the remote control unit supplied
with the stereo amplifier. If you do not plan to use this feature, it is
not necessary to connect the CONTROL IN/ OUT jacks.
•
Be sure not to connect this unit to the amplifier’s PHONO
jacks, as sound will be distorted and normal playback will not
be possible.
2 Connect the power cord to a household AC wall outlet.
Make sure plugs are inserted fully into the wall outlet.
•
The remote control unit supplied with the amplifier can be used
to control Play, Stop, Pause, Track/Disc Search and Disc
Change operations.
For instructions regarding connections and operation, refer to
the operating instructions provided with your stereo amplifier.
•
Note!!
•
If you connect the power cord to a "SWITCHED" AC outlet on an
amplifier, you will not be able to use this unit's memory function.
Notes!!
B Connecting the OPTICAL FIBER CABLE
CD can be played using the digital output.
This unit can be connected to an amplifier equipped with an optical
digital jack.
•
When a control cable is connected to the player’s CONTROL IN
jack, direct control of the player with the remote control unit is
not possible. Operate the player with the remote control unit by
aiming it at the amplifier.
1. Remove the protective dust cap from this unit’s OPTICAL
DIGITAL OUT jack.
2. Use an optical fiber cable to connect the OPTICAL DIGITAL
OUT jack of this unit to the optical input jack of the amplifier.
•
Be sure to connect both of the control cable's plugs securely to
the CONTROL IN and CONTROL OUT jacks. Do not connect
only one end of the cable.
Be sure to turn off the power of the amplifier before connect-
ing the power cord and output cable.
When only the digital output is connected, the remote sensor
of the amplifier does not function. To operate it, connect the
output cable to the stereo amplifier as well as connecting the
digital output.
•
•
•
Align the plug of the optical fiber cable with the optical digital
jack and fully insert the plug to make a secure connection.
Use a separately sold optical fiber cable for the optical digital jack
connections.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES OF PARTS
FRONT PANEL
DISPLAY button
&
Digit buttons
@
REPEAT button
#
J og dial
ENTER
!
!
PROGRAM button
%
CLEAR button
@^
MODE button
!@
Hood
9
Track/Manual
search button
(reverse direction)
F
IL
E
–T
Y
P
E
C
O
M
D
P
A
C
T
D
IS
C
P
L
C
A
K
Y
E
R
◊Û¿X,??/
D
IS
C
P
U
S
H
E
N T E R
(41)
1
2
3
0!
IS
C
T
R
A
M
IN
S
E
C
4
7
5
8
6
9
Track/Manual
search button
(forward direction)
D
IS
C
T
R
A
C
K
0
R
A
N D O M
M
O
D
E
C
L
E
A
R
P
R
O
G
R
A
M
R
E
P
E
A
T
D
IS
P
L
A
Y
(¡¢)
0!
STANDBY
indicator
RANDOM button
$
S
T
A
N
N
D
B
Y
F
IL
E
–T
Y
P
E
C
D
M
E
C
H
A
N
IS
M
S
IN
G
L
E
L
O
A
D
P
E
R
Î
S
T
A
D
B
Y
/O
N
6
7
O
P
E
N
/
E
A
C
C
E
S
S
L
A
Y
U
N
L
O
A
D
C
L
O
S
TRACK button
0%
STANDBY/ON
switch
90
CDFILE
1 -BIT DLC
D
IR
E
C
T
LIN
E
A
R
C
O
N
V
E
R
S
IO
N
CD TEXT
3
0
1
–D IS
C
Stop button
0$
DISC button
0%
Play/Pause button
0$%^
Rem ote sensor
8
SINGLE LOADER PLAY button
!
SINGLE LOADER ACCESS button
!
UNLOAD button
9
OPEN/CLOSE button
9!
DISPLAY
Lights during repeat play.
Lights during random play.
Lights when you
choose the play m ode.
DISC
TRACK
MIN
SEC
Lights when a
CD TEXT is being
played.
SINGLE
CUSTOM
ALL
PGM
RDM RPT 1 CD TEXT
PREVIOUS DISC SCAN BEST
Lights when the BEST
button is pressed.
Lights during custom
program m ing and play.
Blinks during DISC SCAN or
TRACK SCAN.
Lights when the PROGRAM (PGM)
button is pressed.
Blinks when the PREVIOUS button
is pressed.
Lights during pause m ode.
Lights when a CD is being played.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES OF PARTS
REMOTE CONTROL UNIT
1 HI-LITE button
2 STANDBY/ON button
&
1
q
w
90
3 MODE button
4 REPEAT button
!@
#
2
5 Digit buttons
6 DISC button
@
0%
HI-LITE PREVIOUS BEST
3
4
e
r
t
REPEAT MODE PROGRAM CLEAR
7 Fast forward (¡) button
0
0
8 Fast reverse (1) button
1
4
2
5
8
0
3
DISPLAY
9 Stop (7) button
0$
0
5
6
9
p Pause (8) button
q PREVIOUS button
$
7
y
w BEST button
#
DISC
TRACK
6
e PROGRAM button
r CLEAR button
@^
t DISPLAY button
y TRACK button
%
u
i
DISC
–
+
7
8
&
0%
1
¡
4
3
¢
o
;
a
RANDOM
7
8
u DISC (–/+) buttons
@
i Skip (reverse) (4) button
0!
0!
9
p
FILE-TYPE CD PLAYER
REMOTE CONTROL UNIT
o Skip (forward) (¢) button
Î
; RANDOM button
$
0$%^
a Play (3) button
REMOTE CONTROL OPERATIONS
When operating the remote control unit, point the unit's infrared
signal transmitter at the remote control receiver (Remote Sensor)
on the front panel of the player. The remote control unit can be
used within a range of about 7 meters (23 feet) from the remote
sensor, and within angles of up to about 30 degrees.
Notes!!
•
7m
(23 feet)
If the remote control sensor window is in a position where it
receives strong light such as sunlight or fluorescent light,
control may not be possible.
30°
30°
8
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO LOAD THE DISCS (Be sure to read this before operation)
Loading discs into the rack
7
Press OPEN/ CLOSE.
The hood will close.
O P E N
C L O S
/
E
•
You can load up to 300 discs in the rack.
When the hood closes, the rack is
revolved once for disc detection
(disc loaded/not loaded detection
function).
The numbers marked on the rack are used as the disc numbers.
These are marked in a clockwise order from 1 to 300.
The follow ing procedure describes how to load discs from
disc No. 1.
•
Tip:
S
T A
N
D
D
B
B
Y
1
Difference between OPEN/ CLOSE and UNLOAD
OPEN/ CLOSE: The hood is simply opened or closed.
UNLOAD: The slot corresponding to the disc No. being displayed
rotates to the center position then the hood is opened.
Notes!!
Press STANDBY/ ON.
S
T A
N
Y
/O
N
•
•
Do not attem pt to open the hood w ith your hand.
Be careful not to pinch your fingers when opening and closing
the hood.
•
If PLAY operation (PLAY, BEST, Hi-LITE, PREVIOUS) is carried
out before disc detection finishes, PLAY operation will pro-
ceeded to without detection. In this case, detection will operate
after PLAY is finished. Detection may not function properly
depending on the color or shape etc., of the disc.
2
1
4
7
2
3
6
9
DISPLAY
Ensure that the disc No.
show n on the display is
"1".
If disc number "1" is not displayed,
press digit button 1 .
5
8
0
DISC
TRACK
WARNING:
(Carry out step 3 within 5 seconds.)
Do not put your hand or any other object inside
the rack, otherw ise injury or part dam age m ay
result.
3
Press UNLOAD.
U N L O A D
«
DISC
TRACK
MIN
SEC
The hood will open.
When UNLOAD is pressed, the
hood opens to the disc correspond-
ing to the disc No. displayed on the
front of the unit.
•
•
While changing or inserting discs, be careful not to press
any buttons on the m ain unit or the rem ote control. The
rack m ay m ove suddenly, and then your fingers m ay be
caught betw een discs and the side of door.
When changing or inserting discs, m ake sure the rack is
stopped. Do not attem pt to put a disc in w hen the rack is
m oving.
Do not put anything other than CDs inside the rack.
Load only one disc into each disc slot.
Do not apply force to the rack. This can cause a malfunction.
8-cm (3-in.) discs cannot be played as they are. First attach the
8-cm (3-in.) disc adapter to each 8-cm (3-in.) disc and load them
together in the player.
4
Load the disc into the
rack w ith the label side
(printed surface) facing to
the right.
•
•
•
•
Label side faces right.
(Side to be played faces left.)
Note!!
•
•
•
Never start playback by placing the 8-cm (3-in.) disc adapter
alone, without attaching it to a disc.
•
Inserting more than one disc into the slot will damage the discs
and cause the unit to malfunction.
The unit will not operate if the hood is opened during playback.
Be sure to close the hood before attempting any operation.
To load or remove a disc in or from the slot which is seen
through the hood, press OPEN/ CLOSE. The hood is opened,
“HOLD” is displayed and the disc can be loaded in or ejected
from the slot seen through the hood. Even while “HOLD” is
being displayed, the rack can be rotated by pressing DISC (–/ +).
D
IS
C
P
U
S
H
E
N
T
E
R
5
Turn the jog dial clock-
w ise to rotate the rack.
When the jog dial is turned
clockwise, the rack turns in the
direction in which the disc number
increases (1, 2, 3 ...).
When turned counterclockwise,
the rack turns in the opposite
direction.
To rem ove the discs...
Press UNLOAD.
1
Select the num ber of the disc you w ant to unload
by turning the jog dial or pressing DISC (–/ +) on
the rem ote control unit.
2
6
Load other discs into the rack by repeat-
ing steps 4 and 5 for each of them .
•
The rack rotates until the selected disc comes to the front
of the unit.
3
4
Rem ove from the rack.
Press OPEN/ CLOSE.
9
•
The hood will close.
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
•
You can also use the remote control.
Digit buttons
HI-LITE PREVIOUS BEST
1
REPEAT MODE PROGRAM CLEAR
D
IS
C
P
U
S
H
E
N T E R
1
2
3
1
4
2
5
8
0
3
6
DISPLAY
Digit buttons
MODE
4
7
5
8
6
9
MODE
7
9
D
IS
C
0
T
R
A
C
K
R
A
N D O M
M
O
D
E
C
L
E
A
R
P
R
O
G
R
A
M
R
E
P
E
A
T
D
IS
P
L
A
Y
41/¡¢
DISC
TRACK
S
T
A
N
D
B
B
Y
F
IL
E
–T
Y
P
E
C
D
M
E
C
H
A
N
IS
M
S
IN
G
L
E
L
O
A
D
P
E
R
Î
STANDBY
indicator
S
T
A
N
D
Y
/
O
N
7
DISC
1/ ¡
TRACK
6
7
O
P
E
N
/
E
A
C
C
E
S
S
L
A
Y
U
N
L
O
A
D
C
L
O
S
DISC
–
+
1
7
¡
8
4
3
¢
4/ ¢
2
6
RANDOM
7
8
2
3
1
DISC
TRACK
To listen in order from the first track
To select the disc and track
Press STANDBY/ ON.
1
Use the digit buttons to
select the disc, then press
DISC.
S
T A
N
D
D
B
B
Y
S
T A
N
Y
/O
N
To turn the pow er off ...
Press STANDBY/ON again.
Use the digit buttons to
select the track, and press
TRACK.
2
Press 6 (or 3).
The tracks are played in order
starting from the first track on the
disc with the lowest disc No.
To select a play m ode
M
O
D
E
Press MODE during play
•
If you choose a play mode beforehand, the tracks/discs are
played back according to the respective play mode.
or stop m ode.
Press a few times to choose the
mode you desire.
Tips:
•
If you play a CD TEXT disc, the title of the disc being played are
shown on the display.
Playback occurs according to the
chosen mode.
•
During CD TEXT disc playback, the display can be changed by
pressing DISPLAY.
ALL
:All discs are played back.
SINGLE :One disc is played back.
CUSTOM :Only discs stored in the CUSTOM file are played back
(see pages 12 to create a custom file).
(1 to 5)
To stop play
3
3
ALL
ALL
SINGLE
In stop m ode:
Press 7.
2
CUSTOM
3
3
SINGLE
During playback:
To pause play
Press 6 (or 8).
To start playback again, press 6.
•
•
When you select SINGLE during playback, only the current disc
will be played.
If you press MODE during program mode, the program contents
will be erased.
To skip to another track
Tap 41/¡¢ (or 4/¢
on the remote control unit).
Notes!!
•
When you turn the power ON, playback starts according to the
last selected play mode.
•
•
If you did not select a play mode, playback starts in ALL.
SINGLE is selected automatically when playing the disc loaded
in the Single Loader slot.
To fast forw ard/ reverse.
Hold-down 41/¡¢ (or
1/¡ on the remote control
unit).
<Last disc m em ory>
When you press 7 or turn the power OFF, the unit memorizes the
disc that was being played. The next time you press 6, playback
will start from that same disc.(This feature is available except in the
PROGRAM play, BEST play, PREVIOUS scan, HI-LITE scan and
RANDOM play modes.)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATIONS
2
J og dial
1
4
2
5
8
0
3
DISPLAY
D
IS
C
P
U
S
H
E
N T E R
1
2
3
6
9
4
7
5
8
6
9
7
ENTER
DISC
TRACK
D
IS
C
0
T
R
A
C
K
R
A
N D O M
M
O
D
E
C
L
E
A
R
P
R
O
G
R
A
M
R
E
P
E
A
T
D
IS
P
L
A
Y
DISC(–/ +)
4/ ¢
DISC
–
+
1
41/¡¢
7
S
T
A
N
D
B
B
Y
F
IL
E
–T
Y
P
E
C
D
M
E
C
H
A
N
IS
M
S
IN
G
L
E
L
O
A
D
P
E
R
S
T
A
N
D
Y
/
O
N
Î
6
7
O
P
E
N
/
E
A
C
C
E
S
S
L
A
Y
U
N
L
O
A
D
C
L
O
S
1
7
¡
8
4
3
¢
RANDOM
7
6
3
3
OPEN/ CLOSE
Single Loader slot
Playing a disc that is not loaded in the
rack
To start playback from a specific disc
In the player pause, turn the
jog dial to select the disc
num ber.
During pause, press 6 or
ENTER ( 3 on the rem ote
control unit) after choosing
D
IS
C
P
U
S
H
E
N
T
E
R
Use the single loader slot to play discs that are not loaded in the
rack.
S
IN G L E
1
2
Press SINGLE LOADER
ACCESS.
A C C E S
S
•
The hood will open with the
single loader slot located in the
front of the unit.
the disc.
(To perform this operation from the
remote control unit, use the DISC (–/
+) buttons to select the disc number.)
Loading the disc into the Single Loader
slot w ith the label side (printed surface)
facing to the right.
•
Playback starts from the first track
of the chosen disc.
Opening or closing the hood during
playback
Label side faces right
(Side to be played faces left)
To open the hood during playback
L O
A
D
P
E R
3
Press SINGLE LOADER
O P E N
C L O S
/
Press the OPEN/ CLOSE
button and hold it in for
about 2 seconds.
E
L A Y
PLAY.
The play mode is set to SINGLE.
•
•
•
“HOLD” is displayed after opening the hood.
In this case, the rack does not rotate.
When the playback of the current disc has completed, the unit
enters stop mode. The next disc is played after the hood has
been closed.
Tips:
•
The disc in the single loader slot can also be selected with the
jog dial.
Use the jog dial to select the spot after disc number 300 and
before disc number 0 (where "P0" is displayed).
If a disc has been loaded in the Single Loader slot, pressing
SINGLE LOADER PLAY allows you to play it anytime, even
during playback of a disc stored in the rack.
•
•
To close the hood, press
O P E N
C L O S
/
E
OPEN/ CLOSE again.
To play the disc in the Single Loader slot using the remote
control unit, press “0” and DISC.
Note!!
To play a track you w ant to hear
If the hood is opened during play, UNLOAD and SINGLE LOADER
ACCESS function are defeated.
Press 41/ ¡¢ during
play or pause to choose the
track num ber you desire (or
press 4/ ¢ on the rem ote
control).
During pause, press 6 after
choosing the track.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC
TRACK
VARIOUS OPERATIONS
2
3
Digit buttons
DISPLAY
CLEAR
REPEAT MODE PROGRAM CLEAR
D
IS
C
P
U
S
H
E
N T E R
1
2
3
1
3
4
1
4
2
5
8
0
3
DISPLAY
MODE
2
4
7
5
8
6
9
6
9
CLEAR
DISPLAY
7
D
IS
C
0
T
R
A
C
K
Digit buttons
R
A
N D O M
M
O
D
E
C
L
E
A
R
P
R
O
G
R
A
M
R
E
P
E
A
T
D
IS
P
L
A
Y
1
MODE
S
T
A
N
D
B
B
Y
F
IL
E
–T
Y
P
E
C
D
M
E
C
H
A
N
IS
M
S
IN
G
L
E
L
O
A
D
P
E
R
S
T
A
N
D
Y
/
O
N
Î
6
7
O
P
E
N
/
E
A
C
C
E
S
S
L
A
Y
U
N
L
O
A
D
C
L
O
S
DISC
–
+
DISC
1
7
¡
8
4
3
¢
DISC (–/ +)
RANDOM
3
4
DISC
To program and play only the discs
you w ant to hear (CUSTOM play)
To start playback
1
4
7
2
5
8
0
3
6
9
Follow steps 1 and 2 then
press 3.
This unit lets you program up to 300 of your favorite discs. For
Playback starts from the lowest
disc No.
example, you can store all the discs of your favorite artist, or some
other group of personal selections, and play only those discs.
You can even add other discs to the custom later on.
Also, there are 5 programmable custom files in which you can
program any discs you like.
Operation exam ple : Program m ing discs 3 and 12 in custom file 5
Checking the num bers of the stored discs.
M
O D E
1
In the stop m ode, press
the MODE button several
tim es to set the custom
m ode.
2
1
After steps
and
, press DISPLAY 3 times.You
should see a display like that shown below.
Press DISC(–/ +). Each time you press DISC(–/ +), a disc
number stored in the CUSTOM file is displayed. When
all the disc numbers have been displayed, the disc
number changes to a blank. (To perform this operation
on the main unit, turn the jog dial clockwise.)
M
O
D
E
(
)
DISC
TRACK
MIN
SEC
5
2
Select the custom num -
ber w ith the digit buttons.
CUSTOM
DISC
TRACK
MIN
SEC
5
CUSTOM
Pressing the front panel’s CLEAR button
during the custom m ode w ill cancel the
displayed disc num ber from the custom
file.
(
)
Light
•
If some disc number appears, press CLEAR.
3
Select the disc num ber
w ith the rem ote control
unit’s digit buttons.
DISC
TRACK
MIN
SEC
3
•
•
When the jog dial is used during custom playback, only the
discs stored in the custom file can be selected.
If you use the digit buttons and DISC during CUSTOM playback
to choose a disc not stored in the CUSTOM file, “NO DISC” will
be displayed for approximately 3 seconds.
When a disc appointed to the CUSTOM file is not loaded in the
rack, “NO DISC” is displayed for approximately 3 seconds, the
disc is erased from memory, and CUSTOM searches for the
next disc.
(
)
CUSTOM
•
The disc number can also be selected with DISC (–/+) or the
main unit’s jog dial. In this case, because custom registration
will function after approx. 2 seconds, step 4 is not necessary.
•
•
4
Press DISC.
The discs stored in the CUSTOM file will not be erased when
you turn off the power.
D IS C
(
)
5
Repeat steps 3 and 4 to
store other discs.
DISC
TRACK
MIN
SEC
CUSTOM
12
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS OPERATIONS
REPEAT
HI-LITE PREVIOUS BEST
D
IS
C
P
U
S
H
E
N T E R
1
2
3
BEST
REPEAT MODE PROGRAM CLEAR
4
7
5
8
6
9
REPEAT
1
4
2
5
8
0
3
DISPLAY
D
IS
C
0
T
R
A
C
K
R
A
N
D
O
M
6
9
M
O
D
E
C
L
E
A
R
P
R
O
G
R
A
M
R
E
P
E
A
T
D
IS
P
L
A
Y
S
T
A
N
D
B
B
Y
7
F
IL
E
–T
Y
P
E
C
D
M
E
C
H
A
N
IS
M
S
IN
G
L
E
L
O
A
D
P
E
R
S
T
A
N
D
Y
/
O
N
Î
6
7
O
P
E
N
/
E
A
C
C
E
S
S
L
A
Y
U
N
L
O
A
D
C
L
O
S
DISC
TRACK
DISC
–
+
1
¡
4
¢
To store your favorite tracks (BEST play)
To repeat playback (REPEAT play)
To use the one-touch m em ory, just press the BEST button
w hile playing a track you like. You can store up to 20 tracks.
The operation is available only from the remote control unit.
•
•
The operation is available only from the remote control unit.
These operations can not be perform ed on the CD inserted
into the SINGLE LOADER SLOT.
Press the REPEAT button
during playback. Each
tim e you press the
B E S
T
button, the repeat m ode
changes as follow s.
Press BEST w hile playing
a track you like.
The BEST indicator blinks and the
disc and track number are stored in
memory.
3
3
One track repeat
ALL repeat
(ALL/SINGLE/CUSTOM)
DISC
TRACK
MIN
SEC
ALL
BEST
2
OFF
Blink
(One track repeat)
Repeats the current or a selected track during play operations
other than HI-LITE scan and PREVIOUS scan.
<To listen to the m em orized tracks>
B E S
T
Press BEST during stop
(ALL repeat)
m ode.
Repeats in one of the following 3 ways according to the play
The BEST indicator lights and
playback starts from the most
recently memorized track.
mode.
ALL
: Repeats all the tracks on all the discs (1 - 300).
SINGLE : Repeats all the tracks on the selected disc.
CUSTOM : All of the discs classified under one of the 5 CUSTOM
•
•
•
If you press CLEAR during Best playback, the current track is
erased and the next track starts to play.
You cannot memorize a track twice by pressing BEST during
Best playback.
If you press BEST to memorize a track when 20 tracks are
already memorized, the oldest track is erased from memory and
the new track is memorized.
banks are played repeatedly.
(OFF)
Cancels repeat play and returns the unit to normal play mode.
•
The memorized contents are stored, even when the power is
turned off.
•
•
To stop repeat playback, press 7.
During ALL repeat mode, if the ALL, SINGLE or CUSTOM play
mode is not displayed, the currently playing program mode (i.e.
PROGRAM play, BEST play, PREVIOUS scan or HI-LITE scan)
will be repeated.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS OPERATIONS
HI-LITE PREVIOUS BEST
PREVIOUS
REPEAT MODE PROGRAM CLEAR
D
IS
C
P
U
S
H
E
N T E R
1
2
3
1
4
2
5
8
0
3
DISPLAY
4
7
5
8
6
9
6
9
7
D
IS
C
0
T
R
A
C
K
R
A
N D O M
M
O
D
E
C
L
E
A
R
P
R
O
G
R
A
M
R
E
P
E
A
T
D
IS
P
L
A
Y
RANDOM
DISC
TRACK
S
T
A
N
D
B
B
Y
F
IL
E
–T
Y
P
E
C
D
M
E
C
H
A
N
IS
M
S
IN
G
L
E
L
O
A
D
P
E
R
S
T
A
N
D
Y
/
O
N
Î
6
7
O
P
E
N
/
E
A
C
C
E
S
S
L
A
Y
U
N
L
O
A
D
C
L
O
S
DISC
–
+
7
6
1
7
¡
8
4
3
¢
RANDOM
7
RANDOM
3
To find out w hich discs you’ve listened
to recently (PREVIOUS scan)
To playback tracks/ discs at random
(RANDOM play)
•
•
This function scans the discs in reverse order, starting from
the last disc you played.
It can rem em ber up to 20 discs. If the total num ber of discs
exceeds 20, the oldest disc w ill be erased to m ake room for
the new disc.
The operation is available only from the remote control unit.
These operations can not be perform ed on the CD inserted
into the SINGLE LOADER SLOT.
RANDOM selects tracks at random from the disc(s) in the current
play mode and plays each track once. The selected play mode
stops after its contents are played back. (Refer to chart below.)
Play m ode selected
ALL
Play contents
•
•
Plays all tracks in all discs in a random
order.
SINGLE
Plays all the tracks from a single disc at
random.
Exam ple:If you played discs 1, 2, 9, 12 and 13 in order.
CUSTOM
Plays all tracks in the discs stored in the
CUSTOM file in a random order.
P R E V IO U S
Press the PREVIOUS
button.
•
The unit plays a 10 second
portion located one minute into
the first track of each disc,
starting from the last disc you
played: 13, 12, 9, 2, 1.
R A N D O M
Press RANDOM during
DISC
TRACK
MIN
SEC
either play or stop m ode.
•
The RANDOM indicator lights
up and random play according to
the current play mode starts.
PREVIOUS
SCAN
R
A
M
D
O
M
Blink
(
)
3
Press 3 ( 6 ) w hen you
reach the disc you w ant
to hear.
Previous disc scan is canceled
and normal play resumes.
To stop random play,
press 7.
•
(
)
Notes!!
•
Random play cannot be activated during the program mode. (If
you press RANDOM during program play or best play, the
program contents will be erased and the unit will start to play
tracks at random from all the discs.)
•
•
To cancel the scanning, press 7.
Discs played during random, program, HI-LITE scan, Best and
Single Loader playback are not included in the PREVIOUS scan.
If the first track is less than 1 minute long, the first 10 seconds
of the track the beginning will be played. If the first track is less
than 10 seconds long, the entire track will be played.
•
•
•
If you press REPEAT during random play, the contents of the
random mode are repeated. (RANDOM REPEAT)
If you press MODE during random play, random play is
switched to the ALL or SINGLE play.
If all discs contain no more than 16 tracks, random play can play
every track in the discs once.
•
If any of the discs contain more than 16 tracks, random play
plays the same number of tracks as the total number of tracks
in the discs, but the tracks with track number 17 or more are
not always played once.
•
If disc detection has not finished, random play will begin after it
has detection has finished.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS OPERATIONS
2
4
1
2
3
4
1
REPEAT MODE PROGRAM CLEAR
CLEAR
D
IS
C
P
U
S
H
E
N
T
E
R
1
4
2
5
8
0
3
DISPLAY
1
2
3
4
7
5
8
6
9
6
9
2
3
4
4
7
CLEAR
D
IS
C
0
T
R
A
C
K
R
A
N D O M
M
O
D
E
C
L
E
A
R
P
R
O
G
R
A
M
R
E
P
E
A
T
D
IS
P
L
A
Y
DISC
TRACK
3
S
T
A
N
D
B
B
Y
3
4
F
IL
E
–T
Y
P
E
C
D
M
E
C
H
A
N
IS
M
S
IN
G
L
E
L
O
A
D
P
E
R
S
T
A
N
D
Y
/
O
N
Î
2
DISC
–
+
6
7
O
P
E
N
/
E
A
C
C
E
S
S
L
A
Y
U
N
L
O
A
D
C
L
O
S
1
7
¡
8
4
3
¢
7
RANDOM
7
5
5
6
8
To program tracks/ discs in a desired
order (PROGRAM play)
Repeat steps 2 and 3 to
program additional discs
4
and tracks.
•
The remote control is the most convenient way to perform
these operations.
You can program up to 36 steps.
The same operation is possible by pressing the button indicated
between parentheses.
Once the track times have been
added, the PGM indicator stops
blinking and the following display
appears (Total Time).
•
•
5
D IS C
(
(
)
DISC
TRACK
MIN
SEC
Operation exam ple : Program m ing disc 2, track 7 as step 1,
and disc 5, track 3 as step 2.
PGM
P R O G R A M
1
Press PROGRAM during
stop m ode.
3
T R A C K
DISC
TRACK
MIN
SEC
)
P
R
O
G
R
A
M
PGM
(
)
3
5
Press 3.
2
Use the digit buttons to
select the disc, then press
DISC.
The program play starts from the
track that was programmed first.
DISC
TRACK
MIN
SEC
(
)
2
D IS C
PGM
(
)
The follow ing operations can only be perform ed
during norm al play, HI-LITE scan or PREVIOUS scan
The PROGRAM indicator
starts to blink.
<Program m ing tracks during norm al play>
(Direct program )
1. Press PROGRAM.
3
Use the digit buttons to
select the track, and press
TRACK.
•
Program mode is activated.
2. Press PROGRAM during playback.
The current track is programmed.
DISC
TRACK
MIN
SEC
•
<Program m ing during norm al playback>
(Preprogram m ing)
PGM
7
T R A C K
You can program during normal playback.
(
)
DISC
TRACK
MIN
SEC
2
3
4
1
(\Operation example
)
•
•
The player changes to program play when the current track
finishes playing back.
To change to program mode directly, press 3.
PGM
The follow ing operations can only be perform ed
during stop m ode
<Program m ing an entire disc as one step>
(Disc all program )
3
If you skip step
of the operation example, disc 2 is programmed
as step 1 .
15
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS OPERATIONS
HI-LITE
HI-LITE PREVIOUS BEST
REPEAT MODE PROGRAM CLEAR
1
4
2
5
8
0
3
6
DISPLAY
7
9
DISC
TRACK
DISC
–
+
1
7
¡
8
4
3
¢
RANDOM
3
To scan quickly through tracks on a
disc (HI-LITE scan)
<Program m ing a pause (rem ote control only)>
(Pause program )
4
If you press 8 at step
, you can program a pause. When you
•
The operation is available only from the remote control unit.
press 8, “PA” appears in the display instead of the disc number.
For example, when making a program for recording both sides
•
This function plays a 10 second portion located 1 minute from the
start of each track on all the discs in the current play mode.
of a cassette tape, press 8 to insert a pause after programming
the tracks for one side. After turning the tape over, press 8 to
resume recording.
<Disc scan>
H I-L IT E
Press HI-LITE during
either play or stop m ode.
Notes!!
•
You cannot program a pause as the first step, nor program
two pauses in a row.
•
The unit plays a 10 second
portion located 1 minute into the
first track of each CD, starting
from the first CD.
•
When you program a pause, it counts as 1 step and
reduces the total number of tracks you can program.
Press once
•
•
To erase a program ...
The ”DISC” and “SCAN” indicator blinks.
Press 7 twice during playback (or once in stop mode). You can
also erase the program by pressing MODE, RANDOM,
PREVIOUS, or SINGLE LOADER PL1AY in either play or stop
mode (or by pressing BEST in stop mode).
To cancel a program step
<Track scan>
Press HI-LITE tw ice during
either play or stop m ode.
The unit plays a 10 second
portion located 1 minute into
each track of each CD, starting
from the first CD.
H I-L IT E
•
In stop mode, each time you press CLEAR, the last step in the
program is erased.
•
If a programmed disc is missing or inserted backwards during
program play, “NO DISC” appears in the display, the step is
automatically erased, and playback proceeds to the next step.
Program contents are stored in memory even when the
power is turned off.
Press twice
The “SCAN” indicator blinks.
•
<Program scan> Press HI-LITE during
•
Press the DISPLAY twice to check the number of steps that
have been programmed.
program m ode.
H I-L IT E
•
The unit plays a 10 second
portion located 1 minute into
each track in the program.
DISC
TRACK
MIN
SEC
This indicates the number of
programmed steps.
PGM
Press once
The “SCAN” indicator blinks.
Notes!!
5
•
If step
is carried out before the accumulated time is
displayed, the program play starts and the time is not displayed.
When UNLOAD is pressed while a program has been entered,
the disc for the 1st program step comes on the center position
and the hood opens.
The display is not shown if the total time of the program is 100
minutes or more.
<Best selection m em ory scan>
•
Press HI-LITE during best
H I-L IT E
selection m em ory play-
back.
•
•
The unit plays a 10 second
portion located 1 minute into
each track in the best selection
memory.
Press once
The “SCAN” indicator blinks.
<To return to norm al playback>
Press 3 (or 6) w hen you
reach the track you w ant
to hear.
3
HI-LITE scan is canceled
and norm al play resum es.
16
•
To cancel HI-LITE scan, press 7.
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS OPERATIONS
DISPLAY
HI-LITE PREVIOUS BEST
REPEAT MODE PROGRAM CLEAR
D
IS
C
P
U
S
H
E
N T E R
1
2
3
1
4
2
5
8
0
3
6
DISPLAY
4
7
5
8
6
9
DISPLAY
D
IS
C
0
T
R
A
C
K
R
A
N D O M
M
O
D
E
C
L
E
A
R
P
R
O
G
R
A
M
R
E
P
E
A
T
D
IS
P
L
A
Y
7
9
S
T
A
N
D
B
B
Y
F
IL
E
–T
Y
P
E
C
D
M
E
C
H
A
N
IS
M
DISC
TRACK
S
IN
G
L
E
L
O
A
D
P
E
R
S
T
A
N
D
Y
/
O
N
Î
6
7
O
P
E
N
/
E
A
C
C
E
S
S
L
A
Y
U
N
L
O
A
D
C
L
O
S
DISC
–
+
1
7
¡
8
4
3
¢
RANDOM
When playing a disc containing CD TEXT, the disc
title appears after the elapsed tim e display.
Notes!!
*
•
•
You can use 4/¢ to skip to another track during track scan.
If the player is in ALL REPEAT mode, the HI-LITE scan will
repeat.
When the CD TEXT disc
starts to be played, the disc
title scrolls on the display.
(Example: BEETHOVEN
SYMPHONY)
•
If the track is less than 1 minute long, the first 10 seconds of
DISC
TRACK
MIN
SEC
the track will be played. If the track is less than 10 seconds long,
the entire track will be played.
ALL
(The scrolled title can consist up to
60 characters.)
DISC
TRACK
MIN
SEC
•
The top 8 characters of the title
are shown in stop mode.
ALL
DISC
TRACK
MIN
SEC
To use the DISPLAY button
ALL
Press DISPLAY during
D
IS
P
L A
Y
playback.
Characters that can be show n in the title display
Each time you press DISPLAY, the
display changes as follows.
•
•
Alphabet (Lowercase letters are converted into uppercase.)
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Numerals and symbols
0 1 2 3 4 5 6 7 8 9 – + / \ | X _ (Space)
Other symbols than the above are shown as (Space).
Disc num ber, Track num ber and
=
Elapsed Tim e.
*
«
Rem aining tim e (TRACK)
«
Rem aining tim e (DISC)
«
Total tim e (TOTAL)
Notes!!
•
Time remaining on the track may not be displayed for tracks
numbered greater than 24.
•
•
Time remaining on the disc is not displayed during RANDOM,
PROGRAM or BEST play.
During PROGRAM play
•
During BEST play
Disc num ber, Track
Disc num ber, Track
=num ber and Elapsed
=
num ber and Elapsed
Tim e.
*
Tim e.
*
«
«
Rem aining tim e
(TRACK)
Rem aining tim e (TRACK)
«
«
Total num ber of steps
m em orized in BEST
(TOTAL)
Total program tim e
and num ber of steps
(TOTAL)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the
points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your
dealer to carry out repair work.
Sym ptom
Cause
Rem edy
No sound
•
•
Output cables are connected incorrectly or
loosely.
Incorrect operation of stereo amplifier.
•
•
Connect properly.
Check the settings of amplifier switches and
sound volume controls.
•
•
•
Pin plugs and/or amplifier terminals are dirty.
Player is in pause mode.
The disc is loaded with the label side leftward.
•
•
•
Clean away dirt.
Press 3 or 8.
Reload the disc with the label side rightward.
When playback is started, it
stops immediately.
Pauses or stops during
playback.
•
•
Disc is inserted in the wrong way.
Smudges, etc., on the disc.
•
•
Insert the disc correctly with the label side
leftward.
Clean the smudges from the disc and then
play it again.
Remote control will not
function.
•
•
Dead batteries.
Obstruction between player and remote control
unit.
•
•
Replace batteries.
Relocate remote control unit or remove
obstruction.
Abnormal functioning of this unit may be caused by static electricity, or other external interference. To restore normal operation unplug the AC
power cord and then plug it in again.
SELF-DIAGNOSTICS FUNCTION
The unit incorporates the self-diagnostic function.
When an abnormality is detected during operation of the unit, an error message (service No.) appears on the unit‘s display automatically. Treat
the error by following the instructions in ”Counterm easures”.
Display on the unit
DISC
TRACK
MIN
SEC
Service No.
Service No.
U1
Unit Status
Counterm easures
Reload the discs properly.
(Insert only one disc in a slot.)
Check if there is a foreign object attached onto
the disc.
•
•
•
The disc may not be loaded properly in the rack.
Check if there is a foreign object in the rack.
•
•
Check if there is a foreign object in the rack.
Unplug the power cord then plug it in again.
There is an operation error in the mechanical
section.
U2
U3
•
•
Check if the hood is caught by anything.
Unplug the power cord then plug it in again.
There is an error related to the hood.
If the same display appears again, there may be an error in the mechanical section. When requesting servicing, please also let us know the
service number displayed on the unit.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
1. General
4. Accessories
Type ........................................... Compact disc digital audio system
Power requirements ............................................... AC 120V, 60 Hz
Power consumption ................................................................. 12 W
Power consumption in standby mode ....................................... 1 W
Operating temperature .............................................. +5°C – +35°C
(+41°F – +95°F)
•
•
•
•
•
•
Remote control unit ................................................................... 1
Size AA/R6P dry cell batteries ................................................... 2
Audio cable ................................................................................ 1
Control cable .............................................................................. 1
Warranty card ............................................................................ 1
Operating instructions ............................................................... 1
Weight ( without package ) ................................. 7.5 kg (16 lb 9 oz.)
External dimensions ......................... 420(W) X 433(D) X 193(H) mm
(16-9/16(W) X 17-1/16(D) X 7-5/8(H) in.)
Note!!
Specifications and design subject to possible modification without
notice, due to improvements.
2. Audio section
Frequency response ................................................... 2 Hz - 20 kHz
S/N ratio .......................................................... 98 dB or more (EIAJ)
Dynamic range ................................................ 96 dB or more (EIAJ)
Harmonic distortion ....................................... 0.003 % or less (EIAJ)
Level difference between channels ................. 1.0 dB or less (EIAJ)
Output voltage ........................................................... 2 Vrms (EIAJ)
Wow and flutter ............................... less than ±0.001 % (W.PEAK)
( below measurable level ) (EIAJ)
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by
tugging the cord and never touch the power cord when your hands
are wet as this could cause a short circuit or an electric shock. Do
not place the unit, a piece of furniture, etc., on the power cord, or
pinch the cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they are not
likely to be stepped on. A damaged power cord can cause a fire or
give you an electrical shock. Check the power cord once in a while.
When you find it damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement.
Channels ............................................................ 2-channel ( stereo )
3. Input/ Output term inal
Audio line output
Control input/output jacks
Optical digital output jack
I
We Want You Listening For A Lifetime
E
We
EST 1924
Used wisely, your new sound equipment will provide a lifetime of fun and
enjoyment. Since hearing damage from loud noise is often undetectable until
it is too late, this manufacturer and the Electronic Industries Association’s
Consumer Electronics Group recommend you avoid prolonged exposure to
excessive noise. This list of sound levels is included for your protection.
Want You
LISTENING
For A Lifetime
Selecting fine audio equipment such as the unit you’ve just purchased is
only the start of your musical enjoyment. Now it’s time to consider how you
can maximize the fun and excitement your equipment offers. This manufac-
turer and the Electronic Industries Association’s Consumer Electronics
Group want you to get the most out of your equipment by playing it at a safe
level. One that lets the sound come through loud and clear without annoying
blaring or distortion-and, most importantly, without affecting your sensitive
hearing.
Decibel
Level
Example
30
40
50
60
70
80
Quiet library, soft whispers
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock
at two feet.
Sound can be deceiving. Over time your hearing “comfort level” adapts to
higher volumes of sound. So what sounds “normal” can actually be loud and
harmful to your hearing. Guard against this by setting your equipment at a
safe level BEFORE your hearing adapts.
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER
CONSTANT EXPOSURE
90
100
120
140
180
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet plane
To establish a safe level:
÷ Start your volume control at a low setting.
÷ Slowly increase the sound until you can hear it comfortably and
clearly, and without distortion.
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
Once you have established a comfortable sound level:
÷ Set the dial and leave it there.
I
Taking a minute to do this now will help to prevent hearing damage or loss
in the future. After all, we want you listening for a lifetime.
E
EST 1924
We
Want You
LISTENING
For A Lifetime
19
Download from Www.Somanuals.com. All Manuals Search And Download.
D
IS
C
P
U
S
H
E
N T E R
1
2
3
4
7
5
8
6
9
POWER ON DEMO display
D
IS
C
0
T
R
A
C
K
R
A
N D O M
M
O
D
E
C
L
E
A
R
P
R
O
G
R
A
M
R
E
P
E
A
T
D
IS
P
L
A
Y
POWER ON DEMO display mode allows you to see variations of
the display. To enter the POWER ON DEMO display mode, press
POWER and then 4 1 within 1 second after turning on the
power.
S
T
A
N
D
B
B
Y
F
IL
E
–T
Y
P
E
C
D
M
E
C
H
A
N
IS
M
S
IN
G
L
E
L
O
A
D
P
E
R
S
T
A
N
D
Y
/
O
N
Î
6
7
O
P
E
N
/
E
A
C
C
E
S
S
L
A
Y
U
N
L
O
A
D
C
L
O
S
To cancel the POWER ON DEMO display mode, press any button.
Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer
Authorized Independent Service Company, or if you wish to purchase replacement parts,
operating instructions, service manuals, or accessories, please call the number shown
below.
8 0 0 – 4 2 1 – 1 4 0 4
Ple ase do not ship your product to Pione e r without first calling the Custome r Se rvice
Department at the above listed number for assistance.
PIONEER ELECTRONICS SERVICE, INC.
CUSTOMER SERVICE DEPARTMENT
P.O. BOX 1760, LONG BEACH,
CA 90801-1760, U.S.A.
For warranty information please see the Limited Warranty sheet included with your product.
Should this product require service in Canada, please contact a Pioneer Canadian Authorized
Dealer to locate the nearest Pioneer Authorized Service Company in Canada.
Alternatively, please contact the Customer Service Department at the following address:
Pioneer Electronics of Canada, Inc.
Customer Service Department
300 Allstate Parkway, Markham, Ontario
L3R OP2
(905) 479-4411
1-877-283-5901
For warranty information please see the Limited Warranty sheet included with your product.
Si ce produit doit être réparé au Canada, veuillez vous adresser à un distributeur autorisée
Pioneer au Canada pour obtenir le nom de la Société de Service Autorisée Pioneer le plus
prè s de che z vous . Ou e ncore , ve uille z com m unique r ave c le Se rvice de Clie ntè le de
Pioneer:
Pioneer électroniques du Canada, Inc.
Département de service aux consommateurs
300 Alls tate Parkw ay, Markham , Ontario
L3R OP2
(905) 479-4411
1-877-283-5901
Pour obtenir des renseignements sur la garantie, veuillez vous reporter au feuillet sur la
Garantie Limitée qui accompagne le produit.
Published by Pioneer Corporation.
Copyright © 1999 Pioneer Corporation.
All rights reserved.
PIONEER CORPORATION
PIONEER ELECTRONICS [USA] INC.
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A.
PIONEER ELECTRONICS OF CANADA, INC.
PIONEER ELECTRONIC [EUROPE] N.V.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: [03] 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
San Lorenzo Num 1009 3er piso Desp. 302 Col. Del Valle, Mexico D.F. C.P. 03100 TEL: 5-688-52-90
<99K00ZF0S00>
Printed in Japan <PRB1300-A>
Download from Www.Somanuals.com. All Manuals Search And Download.
|