AUDIO/VIDEO MULTI-CHANNEL
RECEIVER
SINTOAMPLIFICATORE
AUDIO/VIDEO MULTICANALE
VSX-D712
VSX-D812
VSX-D912
Operating Instructions
Istruzioni per l’uso
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for buying this Pioneer product.
Please read through these operating instructions so that you will know how to operate your
model properly. After you have finished reading the instructions, put them in a safe place for
future reference.
Operating other Pioneer components . . . .27
01 Before you start
Checking what’s in the box . . . . . . . . . . . . 5
Installing the receiver. . . . . . . . . . . . . . . . . 5
Making cable connections . . . . . . . . . . . . . 5
Loading the batteries . . . . . . . . . . . . . . . . . 5
Operating range of remote control unit . . . 6
05 Controls and displays
Front panel . . . . . . . . . . . . . . . . . . . . . . . .28
Display . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Remote control . . . . . . . . . . . . . . . . . . . . .32
02 5 minute guide
06 Playing sources
Introduction to home theater . . . . . . . . . . . 7
Listening to Surround Sound . . . . . . . . . . . 8
Using the Quick Setup . . . . . . . . . . . . . . . 12
Introduction to Sound Modes . . . . . . . . . .35
Stereo/Direct. . . . . . . . . . . . . . . . . . . . . .35
Standard mode . . . . . . . . . . . . . . . . . . . .35
Advanced Surround modes. . . . . . . . . . .36
Choosing the input signal . . . . . . . . . . . . .36
Listening to multi-channel playback . . . . .37
Using Stereo/Direct. . . . . . . . . . . . . . . . . .38
Using Advanced Surround . . . . . . . . . . . .38
Using the Surround Back Channel
03 Quick surround sound setup
(VSX-D912 only)
Automatically calibrating your
listening area (MCACC) . . . . . . . . . . . . . . 14
(SB CH) . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Using the Virtual Surround Back
04 Connecting up
Audio/Video cords . . . . . . . . . . . . . . . . . . 16
S-video cables . . . . . . . . . . . . . . . . . . . . . 16
Digital audio coaxial cords/
mode (VSB) . . . . . . . . . . . . . . . . . . . . . . . .40
Using Midnight and Loudness listening . .41
Using the tone controls . . . . . . . . . . . . . . .41
Playing other sources . . . . . . . . . . . . . . . .41
Selecting the multi-channel
Optical cables . . . . . . . . . . . . . . . . . . . . . 16
Connecting digital components . . . . . . . . 17
Connecting audio components . . . . . . . . 18
Connecting DVD multi-channel
components. . . . . . . . . . . . . . . . . . . . . . . 19
Connecting video components. . . . . . . . . 20
Connecting to the front panel
analog inputs . . . . . . . . . . . . . . . . . . . . . .42
Using the sleep timer . . . . . . . . . . . . . . . .42
07 Setting up
Choosing your receiver setup . . . . . . . . . .43
Speaker setting . . . . . . . . . . . . . . . . . . . .44
Surround back speaker setting . . . . . . . .45
Subwoofer setting . . . . . . . . . . . . . . . . . .45
Crossover frequency setting . . . . . . . . . .45
LFE attenuator setting. . . . . . . . . . . . . . .46
Front left speaker distance setting . . . . .46
Center speaker distance setting . . . . . . .46
Front right speaker distance setting . . . .47
Surround right speaker distance
video terminal . . . . . . . . . . . . . . . . . . . . 20
Connecting antennas. . . . . . . . . . . . . . . . 21
FM wire antenna . . . . . . . . . . . . . . . . . . 21
AM loop antenna . . . . . . . . . . . . . . . . . . 21
Using external antennas . . . . . . . . . . . . 21
Connecting the speakers (VSX-D712) . . . . 22
Connecting the speakers
(VSX-D812/D912) . . . . . . . . . . . . . . . . . . . 23
Speaker terminals . . . . . . . . . . . . . . . . . 24
A and B speaker systems. . . . . . . . . . . . 24
Hints on speaker placement . . . . . . . . . 24
Connecting additional amplifiers . . . . . . . 26
Power cord caution . . . . . . . . . . . . . . . . 27
setting. . . . . . . . . . . . . . . . . . . . . . . . . . .47
Surround back speaker distance
setting. . . . . . . . . . . . . . . . . . . . . . . . . . .47
Download from Www.Somanuals.com. All Manuals Search And Download.
Surround left speaker distance
Programming signals from other
setting . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Subwoofer distance setting . . . . . . . . . . 47
Dynamic range control setting. . . . . . . . 48
Dual mono setting . . . . . . . . . . . . . . . . . 48
Surround back channel input
setting (VSX-D812/D912 only) . . . . . . . . 48
Digital input settings . . . . . . . . . . . . . . . 48
Manually calibrating your listening
remote controls (VSX-D812/D912 only) . . .61
Erasing all of your programmed
settings (VSX-D812/D912 only) . . . . . . . . .62
Clearing all the remote control
settings . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Direct function . . . . . . . . . . . . . . . . . . . . .62
Controls for TVs . . . . . . . . . . . . . . . . . . . . .63
Controls for other components . . . . . . . . .64
Preset Code List (VSX-D712 only). . . . . . . .67
Preset Code List (VSX-D812/D912 only) . . .68
area (MCACC) . . . . . . . . . . . . . . . . . . . . . 49
Setting separate channel levels for
listening modes . . . . . . . . . . . . . . . . . . . . 51
11 Additional information
08 Using the tuner
Troubleshooting . . . . . . . . . . . . . . . . . . . .70
Resetting the main unit . . . . . . . . . . . . . . .72
Specifications . . . . . . . . . . . . . . . . . . . . . .73
Amplifier section. . . . . . . . . . . . . . . . . . .73
Video Section . . . . . . . . . . . . . . . . . . . . .73
FM Tuner Section . . . . . . . . . . . . . . . . . .73
AM Tuner Section . . . . . . . . . . . . . . . . . .73
Miscellaneous. . . . . . . . . . . . . . . . . . . . .74
Cleaning the unit. . . . . . . . . . . . . . . . . . .74
Listening to the radio . . . . . . . . . . . . . . . . 52
Improving FM stereo sound . . . . . . . . . . 52
Using the RF attenuator. . . . . . . . . . . . . 52
Tuning directly to a station. . . . . . . . . . . 52
Saving station presets . . . . . . . . . . . . . . . 53
Naming station presets . . . . . . . . . . . . . 54
Listening to station presets . . . . . . . . . . 55
An introduction to RDS . . . . . . . . . . . . . . 55
Displaying RDS information . . . . . . . . . 56
Searching for RDS programs. . . . . . . . . 56
An introduction to EON . . . . . . . . . . . . . . 57
Using EON. . . . . . . . . . . . . . . . . . . . . . . 57
Clearing all stations from the
"DTS" ,"DTS-ES Extended Surround" and
"Neo:6" are trademarks of Digital Theater
Systems, Inc.
RDS and EON searches. . . . . . . . . . . . . 58
Manufactured under license from Dolby
Laboratories. "Dolby", "Pro Logic",
09 Making recordings
Making an audio or a video recording . . . 59
"Surround EX", and the double-D symbol
are trademarks of Dolby Laboratories.
10 Controlling the rest of your
system
Setting the remote to control other
components. . . . . . . . . . . . . . . . . . . . . . . 60
Selecting preset codes directly. . . . . . . . . 60
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
CBhaepfteor 1r: e you start
Checking what’s in the box
Making cable connections
Please check that you've received the
following supplied accessories:
Make sure not to bend the cables over the top
of this unit (as shown in the illustration). If this
happens, the magnetic field produced by the
transformers in this unit may cause a
• AM loop antenna
• FM wire antenna
humming noise from the speakers.
• Dry cell batteries (AA size IEC R6) x2
• Remote control
• Microphone (VSX-D912 only)
• Microphone stand (VSX-D912 only)
• These operating instructions
Installing the receiver
Please note the following points:
• Do not place objects directly on top of this
unit. This prevents proper heat dispersal.
Loading the batteries
• When installing on a rack, shelf, etc., be
sure to leave more than 20 cm. of space
above the receiver.
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
01
Before you start
Incorrect use of batteries may result in such
hazards as leakage and bursting. Observe the
following precautions:
• Never use new and old batteries together.
• Insert the plus and minus sides of the
batteries properly according to the marks
in the battery case.
• Batteries with the same shape may have
different voltages. Do not use different
batteries together.
• When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction’s rules
that apply in your country or area.
Operating range of remote
control unit
The remote control may not work properly if:
• There are obstacles between the remote
control and the receiver's remote sensor.
• Direct sunlight or fluorescent light is
shining onto the remote sensor.
• The receiver is located near a device that
is emitting infrared rays.
• The receiver is operated simultaneously
with another infrared remote control unit.
30
30
7m
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
5 minute guide
02
C5hampteri2n: ute guide
Introduction to home theater
You are probably used to using stereo equipment to listen to music, but may not be used to
home theater systems that give you many more options (such as surround sound) when
listening to soundtracks.
Home theater refers to the use of multiple audio tracks to create a surround sound effect,
making you feel like you're in the middle of the action or concert. The surround sound you get
from a home theater system depends not only on the speakers you have set up in your room, but
also on the source and the sound settings of the receiver.
DVD-Video has become the basic source material for home theater due to its size, quality, and
ease of use. Depending on the DVD, you can have up to seven different audio tracks coming
from one disc, all of them being sent to different speakers in your system. This is what creates
a surround sound effect and gives you the feeling of ‘being there’.
This receiver will automatically decode Dolby Digital, DTS, or Dolby Surround DVD-Video discs,
according to your speaker setup. In most cases, you won’t have to make changes for realistic
surround sound, but other possibilities (like listening to a CD with multi-channel surround
sound) are explained in Playing sources on page 35.
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
5 minute guide
Listening to Surround Sound
This receiver was designed with the easiest possible setup in mind, so with the following quick
setup guide, you should have your system hooked up for surround sound in no time at all. In
most cases, you can simply leave the receiver in the default settings.
Be sure to complete all connections before connecting this unit to the AC power source.
1
Hook up your DVD player.
For surround sound, you’ll want to hook up using a digital connection from the DVD player to
the receiver. You can do this with either a coaxial, or an optical connection (you don’t need to
connect both). If you hook up using an optical cable, you should refer to Digital input settings
on page 48 to assign the optical input to DVD.
Use a video cord to connect the video output on your DVD player to the receiver using the jacks
shown below.
2
Hook up your TV.
Use a video cord to connect your receiver to the TV using the jacks as shown below.
Optical cable
VIDEO IN
Video cord
TV
DIGITAL
OUT
OPT
This receiver*
OPT
2
CEN-
TER
DIGITAL OUT
AM
LOOP
FM UNBAL
75
SUB WOOFER
Ω
Coaxial
cable
AUX
CD
IN
PREOUT
SURROUND
BACK
L
L
DIGITAL
OUT
SURROUND
L
(CD-R/TAPE/MD)
O
P
T
I
N
A
N
T
E
N
N
A
R
R
MONITOR OUT
OPT
1
SURROUND
BACK
L
OPT
OUT
IN
VCR
DVR
/
OUT
IN
(TV
/
2
R
O
R
DVD 7.1CH INPUT
SAT)
CONTROL
F
R
N
T
SURROUND
C
E
N
T
E
R
(
C
D
-
R
/
T
A
P
E
/
M
D
)
OUT
OPT
VIDEO
VCR
DVR
/
VIDE
ROUND BACK
SURROUND
FRONT
ASSIGNABLE
COAX
2
(CD)
IN
IN
L
R
L
R
L
1
S
P
E
T
V
/
T
OUT
SA
(
T
V
/
T
IN
GITAL
IN
IN
SA
)
N
ASSIGNABLE
COAX
DVD
LD
FRONT
MONITOR
OUT
T
V
/
/
DIGITAL
IN
2
SAT
IN
OUT
A
A
N
G
L
E
(
C
D
)
D
V
D
ISTRUCTION
B
D
V
D
P
L
A
Y
E
R
COAX
7.1CH
REC INPUT
ANUAL
SUB
WOOFER
COAX
DVD
LD
/
1
1
IN
CD-R
TAPE
E
OUT
IN
PREOUT
(
D
V
D
IN
Î
4
1
¡
¢
7
8
/
STANDBY/ON
(DVD
IN
/
L
D
)
0
3
/
MD
MONITOR
OUT
R
S
/LD)
S-VIDEO
PLAY
R
AUDIO
L
SUB
DVD player
WOOFER
PREOUT
IN
DVD
LD
FRONT
VIDEO OUT
/
D
V
D
S
7.1CH
REC INPUT
IN
CD-R
TAPE
/
/
MD
Video cord
* The illustration shows the VSX-D812/D912, but connections for the VSX-D712 are the same.
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
5 minute guide
02
3
Connect your speakers.
A complete setup of speakers is shown here (six speakers for the VSX-D712, and eight for the
VSX-D812/D912), but everyone’s home setup will vary. Simply connect the speakers you have in
the manner shown below. The receiver will work with just two stereo speakers (the front
speakers in the diagram) but using at least three speakers is recommended, and a complete
setup is best.
Make sure you connect the speaker on the right to the right terminal and the speaker on the left
to the left terminal. Also make sure the positive and negative (+/–) terminals on the receiver
match those on the speakers.
• Use speakers with a nominal impedance of 8 Ω to 16 Ω.
• If you’re not using a subwoofer, change the front speaker setting (see Speaker setting on
page 44) to large.
Front speakers
Center speaker
C
Surround speakers
L
R
LS
RS
AM
LOOP
FM UNBAL
OUT
MONITOR OUT
SURROUN
DVD 5.1CH INT
OUT
IN
VCR
DVR
/
OUT
IN
CONTROL
OUT
VIDEO
OPT
VCR
DVR
/
FRT
CENTER
SURROUND
FRONT
R
L
R
L
R
L
IN
IN
1
S
P
E
TV
/
OUT
SAT
(
T
V
/
IN
IN
IN
SAT
)
ASSIGNABLE
COAX
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
2
SAT
IN
FRONT
A
A
K
(
C
D
)
D
V
D
B
5.1CH
SUB
WOOFER
COAX
REC INPUT
DVD
LD
/
1
IN
CD-R
E
R
S
OUT
IN
PREOUT
SURROUND
BACK
(
D
V
D
)
/
TAPE
IN
/
L
D
/
MD
PLAY
S-VIDEO
R
AUDIO
L
VSX-D712
Powered subwoofer
SW
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
5 minute guide
Front speakers
Center speaker
C
Surround speakers
Surround back speakers
SBL SBR
L
R
LS
RS
CEN-
SUB WOOFER
TER
AUX
IN
PREO
SURROU
BA
L
L
DIGITAL
OUT
SURROUND
OPT
R
R
L
MONITOR OUT
SURROUN
BAC
L
OPT
OUT
VCR
DVR
/
OUT
IN
2
R
R
DVD 7.1CNPUT
CONTROL
FROT
SURROUND
CENTER
(
C
D
-
R
/
T
A
P
E
/
M
D
)
OUT
IN
IN
IN
VIDEO
OPT
1
VCR
DVR
/
FROT
CENTER
SURROUND BACK
SURROUND
FRONT
IN
IN
R
L
R
L
R
L
R
L
S
P
E
TV
/
OUT
SAT
(
T
V
/
T
IN
SA
)
ASSIGNABLE
COAX
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
2
SAT
IN
FRONT
A
A
K
S
I
N
L
E
(
C
D
)
D
V
D
SEE INSTCTION
B
7.1CH
REC INPUT
MANAL
SUB
WOOFE
COAX
DVD
LD
/
1
IN
CD-R
TAPE
E
R
S
OUT
IN
PREOUT
(
D
V
D
)
/
IN
/
L
D
/
MD
S-VIDEO
PLAY
R
AUDIO
L
VSX-D812/D912
Passive
subwoofer
or single
surround
back
Powered subwoofer
SW
TV
INPUT
speaker
VSX-D812/D912 only
• To use the speaker on your TV as the center speaker (C), connect the CENTER PREOUT jack
on this unit to the audio input jack on your TV. In this case the center speaker shown is
unnecessary.
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
5 minute guide
02
• If you are using only one surround back speaker, connect the positive wire to the right
channel (+) terminal, and the negative wire to the left channel (–) terminal (shown below).
• If you select subwoofer (SB SW) in the Surround back speaker setting on page 45 you can
hook up a subwoofer instead of speakers to the surround back speaker terminals. Connect
the wires just as above (and as shown below), connecting the positive wire to the right
channel (+) terminal, and the negative wire to the left channel (–) terminal.
Surround back
speaker (or
subwoofer)
VSX-D812/D912
SURROUND BACK
R
L
4
Plug in the receiver and switch it on, followed by your DVD player, your subwoofer
and the TV.
Make sure you’ve set the video input on your TV to this receiver. Check the manual that came
with the TV if you don’t know how to do this.
Also make sure that DVD/LD is showing in the receiver’s display, indicating that the DVD input
is selected. If it isn’t, press DVD on the remote control to set the receiver to the DVD input.
5
Press QUICK SETUP on the front panel to specify your speaker setup, room size and
listening position.
Use the MULTI JOG dial to select and ENTER to confirm your selection. See Using the Quick
Setup on page 12 if you’re unsure about the settings.
VSX-D912 only
• For a more complete surround sound setup, we recommend using the automatic MCACC
setup in the Quick surround sound setup on page 14.
6
Play a DVD, and adjust the volume to your liking.
There are several other sound options you can select. See Introduction to Sound Modes on
page 35 for more on this. See also Choosing your receiver setup on page 43 for more setup
options.
• Depending on your DVD player or source discs, you may only get digital 2 channel stereo
and analog sound. In this case, the listening mode must be set to STANDARD (it should
already be set—see Listening to multi-channel playback on page 37 if you need to do this) if
you want multi-channel surround sound.
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
5 minute guide
3
Use the MULTI JOG dial to choose your
Using the Quick Setup
speaker setup.
When a subwoofer was detected in step 2, you
can cycle between the following choices:
You can use the Quick Setup to get your
system up and running with just a few button
presses. The receiver automatically makes
the necessary settings after you have selected
your speaker setup, room size and listening
position.
2.1ch
3.1ch
4.1ch
7.1ch*
Note that with the VSX-D912 you don’t have to
make these settings if you use the automatic
MCACC setup instead (in this case, go
straight to the Quick surround sound setup on
page 14).
6.1ch
5.1ch
* VSX-D812/D912 only
If a subwoofer wasn’t detected in step 2, you
can cycle between the following choices:
If you want to make more specific settings,
refer to Choosing your receiver setup on
page 43.
2.0ch
3.0ch
4.0ch
7.0ch*
Use the front panel controls for the steps
below.
6.0ch
5.0ch
* VSX-D812/D912 only
• Check the table below to find the speaker
setup that corresponds with your system.
MULTI JOG
ENTER
MASTER VOLUME
ADVANCED
SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
MONITOR
TONE
QUICK SETUP
DOWN
UP
MULTI JOG
ENING MODE
VIDEO INPUT
L
DIMMER
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
R
1
If the receiver is off, press
ꢀ STANDBY/ON to turn the power on.
The STANDBY indicator goes out.
2
Press QUICK SETUP.
SW DET flashes in the display while the
receiver checks your setup for a subwoofer.
SW YES or SW NO confirms the subwoofer
check, then the display prompts you to select
your speaker setup.
* VSX-D812/D912 only
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
5 minute guide
02
4
5
Press ENTER.
Use the MULTI JOG dial to choose your
room size.
Depending on the distance of your speakers
from the listening position, choose between
small, medium, or large (S, M or L), M being
an average-sized room.
6
Press ENTER.
7
Use the MULTI JOG dial to choose your
listening position.
You can cycle between the following choices:
FWD
MID
BACK
FWD – If you are nearer to the front
speakers than the surround speakers
MID – If you are equal distance from the
front and surround speakers
BACK – If you are nearer to the surround
speakers than the front speakers
8
Press ENTER to confirm your setup.
The display shows the speaker setup, room
size and listening position that you have
selected.
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Quick surround sound setup
Chapter 3:
Quick surround sound setup
VSX-D912 only
1
Connect the microphone to the SETUP
Automatically calibrating
your listening area (MCACC)
MIC jack on the front panel.
2
Place the microphone at your normal
The Multi-Channel Acoustic Calibration
(MCACC) system measures the acoustic
characteristics of your listening area, taking
into account ambient noise, speaker size and
distance, and tests for both channel delay and
channel level. After you have set up the
microphone provided with your system, the
receiver uses the information from a series of
test tones to optimize the speaker settings
and equalization for your particular room.
listening position.
Place the mic about ear level at your normal
listening position using the supplied micro-
phone stand on a table or chair.
Make sure there are no obstacles between the
speakers and the microphone.
3
If the receiver is off, press
ꢀ STANDBY/ON to turn the power on.
The STANDBY indicator goes out.
4
5
6
If you have a subwoofer, turn it on.
Press RECEIVER.
Press MCACC SETUP.
RECEIVER
Try to be as quiet as possible after pressing
MCACC SETUP. The system outputs a series
of test tones to establish the ambient noise
level.
If the noise level is too high, NOISY! blinks in
the display for five seconds. To exit and check
the noise levels again, press MCACC SETUP
(see the notes regarding ambient noise levels
below) or press ENTER when you’re prompted
to GO NEXT?
ENTER
MCACC
SETUP
The system now checks the microphone and
your speaker setup.
If you see an ERR message in the display,
there may be a problem with your mic or the
speaker connections.
• These test tones can be loud, so take care
that there is no one in the room who will
be startled by the noise.
Turn off the power, and check the problem
indicated by the ERR message (see below),
then try the auto surround setup again.
• Make sure the mic and speakers are not
moved during the MCACC setup.
• ERR MIC – Check the microphone
connection.
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick surround sound setup
03
• ERR Fch – Check the front speaker
connections.
• ERR Sch – Check the surround or
surround back speaker connections.
• If the room environment is not optimal for
the auto surround setup (too much
ambient noise, echo off the walls, obsta-
cles blocking the speakers from the
microphone) the final settings may be
incorrect. Check for household appli-
ances (air conditioner, fridge, fan, etc.),
that may be affecting the environment
and switch them off if necessary.
• ERR SW – Make sure the subwoofer has
been switched on and volume on the
subwoofer is turned up.
7
Use ꢀ and ꢁ to select the speaker
system that corresponds to your setup.
Cycle between the following choices:
• Some older TVs may interfere with the
operation of the mic. If this seems to be
happening, switch off the TV when doing
the auto surround setup.
2.0ch 2.1ch* 3.0ch 3.1ch*
7.1ch*
4.0ch
7.0ch
4.1ch*
• Using the MCACC system to set up your
speaker system overwrites any previous
settings you had for the STANDARD or
ADVANCED SURROUND modes.
6.1ch* 6.0ch 5.1ch* 5.0ch
* Indicates a subwoofer is included in your
speaker setup
• When the STANDARD or ADVANCED
SURROUND mode is selected, you can
check the settings made with MCACC by
using CH SELECT (to check channel
levels) or by going through the steps in
Choosing your receiver setup on page 43
to check other settings.
See the table on page 12 if you’re unsure
which speaker system to select.
8
If you selected a speaker system that
includes a subwoofer, press ENTER to
check the subwoofer output level.
If the subwoofer output level is too high/low,
SW.VOL.UP/SW.VOL.DWN blinks in the
display for five seconds. To exit and check
your subwoofer output level, press MCACC
SETUP (see the notes regarding noise levels
below) or simply turn the subwoofer volume
up or down (as indicated), then press ENTER
when you’re prompted to GO NEXT?
• Depending on the the characteristics of
your room, sometimes identical speakers
with cone sizes of around 12cm will end
up with different size settings. You can
correct the setting manually using the
receiver setup on page 43.
9
Press ENTER to finish the auto
surround setup.
The system checks for speaker size, channel
delay and channel level. If you have
connected a subwoofer, it will check for
ambient noise once again.
When the auto surround setup is complete,
the volume level returns to normal and
COMPLETE, then RESUME shows in the
display.
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Connecting up
CChoaptnern4:ecting up
Digital audio coaxial cords/
Optical cables
• Before making or changing any
connections, switch off the power and
disconnect the power cord from the AC
outlet.
Commercially available digital audio coaxial
cords (standard video cords can also be used)
or optical cables (not supplied) are used to
connect digital components to this receiver.
Be sure to insert completely.
Audio/Video cords
Digital audio coaxial cord
(or standard video cord)
Optical cable
Use audio/video cords (not supplied) to
connect the audio/video components and a
video cord to connect the monitor TV.
Connect red plugs to R (right), white plugs to
L (left), and the yellow plugs to VIDEO.
Be sure to insert completely.
R
L
VIDEO
S-video cables
Use S-video cables (not supplied) to get
clearer picture reproduction than regular
video cords.
Connect from an S-video jack on the rear of
the receiver to an S-video jack on the video
component you are hooking up.
Be sure to insert completely.
S VIDEO
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
04
Connecting digital components
The easiest way to hook up this receiver for surround sound is to use a digital input. You can do
this by either coaxial or optical connections (you do not need to do both). The quality of these
two types of connections is the same but since some digital components only have one type of
digital terminal, it is a matter of matching like with like (for example, the coaxial output from the
component to coaxial input on the receiver). The VSX-D712 has three digital inputs on the rear
panel (two coaxial inputs and an optical input) and both the VSX-D812 and VSX-D912 have four
(two coaxial inputs and two optical inputs). Connect your digital components to the rear panel
as shown below.
There is one digital output jack which is marked DIGITAL OUT. If you connect this to the optical
input on a digital recorder (currently these include MD, DAT and CD-R) you can make direct
digital recordings with this unit.
When connecting your equipment, always make sure the power is turned off and the power cord
is disconnected from the AC outlet.
• The arrows indicate the direction of the digital audio signal.
DIGITAL
OUT
DIGITAL
IN
CD recorder
This receiver*
CEN-
TER
AM
LOOP
SUB WOOFER
FM UNBAL
75
Ω
VSX-D912/D812 only
AUX
IN
DIGITAL
OUT
SURROUND
L
CD
IN
OPT
ANTENNA
R
R
MONITOR OUT
SURROUND
BACK
L
OPT
OUT
IN
VCR
DVR
/
OUT
IN
2
DIGITAL
OUT
DVD 7.1CH INPUT
CONTROL
Satellite tuner
CD player
(CD-R/TAPE/MD)
OUT
VIDEO
OPT
VCR
DVR
/
FRONT
IN
IN
R
L
1
(TV
SAT)
S
P
E
TV
/
OUT
SAT
/
IN
IN
IN
ASSIGNABLE
COAX
2
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
SAT
IN
FRONT
A
A
K
(CD)
D
V
D
7.1CH
REC INPUT
SUB
WOOFER
COAX
DVD
LD
/
1
IN
CD-R
TAPE
E
R
S
OUT
IN
PREOUT
(DVD
/LD)
/
DIGITAL OUT
COAX
IN
/
MD
S-VIDEO
PLAY
R
AUDIO
L
DIGITAL OUT
COAX
DVD player
* The illustration shows the VSX-D812/D912, but connections for the VSX-D712 are the same.
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Connecting up
• If you have an LD player, you need to make special connections to ensure you can play 2
RF format LDs on your system. If this is the case, hook up your DVD or LD player directly to
an RF demodulator using both the 2RF output and either a coaxial or optical digital
connection. We also recommend hooking up your digital components to analog audio jacks
as well. Make sure the RF demodulator digital in switch is set correctly (optical or coaxial
depending on the connection). See the component's instruction manual if you are unsure
about its input and output jacks.
Connecting audio components
To begin set up, connect your analog audio components (such as a cassette deck) to the jacks.
For components you want to record with, you need to hook up four plugs to the receiver (a set
of stereo inputs and a set of stereo outputs), but for components that only play, you only need
to hook up one set of stereo plugs. You must also hook up your digital components to analog
audio jacks if you want to record to/from digital components (like an MD) to/from analog
components. See page 17 for more on digital connections.
When connecting your equipment, always make sure the power is turned off and the power cord
is disconnected from the AC outlet.
• The arrows indicate the direction of the audio signal.
This receiver*
OUTPUT
CEN-
TER
AM
LOOP
SUB WOOFER
FM UNBAL
75
CD player
Ω
L
AUX
IN
DIGITAL
OUT
SURROUND
L
R
CD
IN
OPT
ANTENNA
R
R
MONITOR OUT
SURROUND
BACK
L
OPT
OUT
IN
VCR
DVR
/
OUT
IN
2
DVD 7.1CH INPUT
CONTROL
(CD-R/TAPE/MD)
OUT
VIDEO
OPT
VCR
DVR
/
FRONT
CENTER
SURROUND BACK
S I N G L E
IN
IN
R
L
R
L
1
S
P
E
TV
SAT
/
OUT
(TV
/
IN
IN
IN
SAT)
REC PLAY
ASSIGNABLE
COAX
2
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
SAT
IN
FRONT
CD-R/Tape/MD deck
A
A
K
(CD)
L
D
V
D
SEE INSTRUCTION
7.1CH
REC INPUT
MANUAL
SUB
WOOFER
COAX
DVD
LD
/
1
IN
CD-R
TAPE
E
R
S
OUT
IN
PREOUT
(DVD
/LD)
R
/
IN
/
MD
S-VIDEO
PLAY
R
AUDIO
L
* The illustration shows the VSX-D812/D912, but connections for the VSX-D712 are the same.
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
04
Connecting DVD multi-channel components
If you prefer to use a seperate component for decoding DVDs, you can connect a decoder or a
DVD player with multi-channel analog outputs to the multi-channel inputs of this receiver.
When connecting your equipment, always make sure the power is turned off and the power cord
is disconnected from the AC outlet.
• The arrows indicate the direction of the signal.
CEN-
TER
AM
LOOP
SUB WOOFER
FM UNBAL
75
Ω
AUX
CD
IN
IN
DIGITAL
OUT
SURROUND
L
OP
ANTENNA
R
R
MONITOR OUT
VSX-D812/D912 only
SURROUND
BACK
OP
L
OUT
IN
VCR
DVR
/
OUT
IN
2
DVD 7.1CH INPUT
CONTROL
(CD-R/TAPE/MD
OUT
VIDEO
OP
VCR
DVR
/
FRONT
CE
FRO
N
T
SURRO
U
N
D
SURROUND
IN
IN
R
L
OUT
OUTPUT
OUTPUT
BACK OUTPUT
SUB
1
S
E
CENTER
OUTPUT
WOOFER
OUTPUT
VIDEO
SAT
(TV
IN
IN
IN
SA
OUTPUT
ASSIGNABLE
COA
2
DVD
L
L
L
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
SAT
IN
FRONT
A
A
K
(C
D
V
D
I
7.1CH
REC INPUT
SUB
WOOFER
COAX
DVD
LD
/
R
R
R
1
IN
CD-R
TAPE
E
R
S
OUT
IN
PREOUT
(DVD
/LD)
/
IN
/
MD
S-VIDEO
PLAY
R
AUDIO
L
DVD/multi-channel decoder
with multi-channel analog
output jacks
This receiver*
* The illustration shows the VSX-D812/D912, but connections for the VSX-D712 are the same.
• The multi-channel input can only be used when DVD 5.1 ch (VSX-D712) or DVD 7.1 ch (VSX-
D812/D912) is selected (see page 42).
VSX-D812/D-912 only
• If the component you are connecting only has one surround back channel output, change
the Surround back channel input setting (page 48) to SB 1ch IN.
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Connecting up
Connecting video components
Connect your video components to the jacks as shown below. With digital video components
(like a DVD player), you must use the connections shown on this page for the video signal, but
in order to hear a digital source (like a DVD) you should hook up the audio to a digital input (see
page 17). It is also a good idea to hook up your digital components with analog audio
connections (see page 18).
For better quality video, you can hook up using the S-video jacks on the rear of the receiver
instead of the regular video jacks. Make sure they are connected to the video component using
the same kind of connection.
When connecting your equipment, always make sure the power is turned off and the power cord
is disconnected from the AC outlet.
• The arrows indicate the direction of the signal
Video deck
INPUT
VIDEO
L
OUTPUT
VIDEO
This receiver*
OUTPUT
VIDEO
L
AM
LOOP
FM UNBAL
75
Ω
AUX
IN
R
R
TV tuner
DIGITAL
OUT
L
(or Satellite tuner)
CD
OPT IN
ANTENNA
R
R
MONITOR OUT
R
OPT
OUT
IN
VCR
DVR
/
OUT
IN
2
D
CONTROL
(CD-R/TAPE/MD)
OUT
I
OPT
VCR
DVR
/
IN
IN
1
TV
SAT
/
OUT
(TV
/
IN
IN
IN
SAT)
ASSIGNABLE
COAX
2
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
SAT
IN
FRONT
(CD)
D
V
D
INPUT
VIDEO
7.1CH
SUB
WOOFER
COAX
REC INPUT
DVD
LD
/
1
IN
OUTPUT
CD-R
OUT
IN
PREOUT
(DVD
/LD)
/
I
/
MD
S-VIDEO
VIDEO
PLAY
DVD or LD player
R
AUDIO
L
L
R
TV (monitor)
* The illustration shows the VSX-D812/D912, but connections for the VSX-D712 are the same.
Connecting to the front panel video
EO/
CT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
QUICK
SETUP
TONE
SPEAKERS
MULTI JOG
terminal
VIDEO INPUT
Front video connections are accessed via the
front panel using the VIDEO button. There are
standard audio/video jacks as well as an
S-video jack (the VSX-D912 also has an optical
input). Hook them up the same way you made
the rear panel connections.
SETUP
MIC
DIGITAL IN
S-VIDEO
VIDEO
AUDIO
R
Video
camera
(etc.)
V
L
R
DIGITAL OUT
VIDEO OUTPUT
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
04
Antenna snap connectors
Twist the exposed wire strands together and
insert into the hole, then snap the connector
shut.
Connecting antennas
Connect the AM loop antenna and the FM
wire antenna as shown below. To improve
reception and sound quality, connect external
antennas (see Using external antennas
below). Always make sure that the receiver is
switched off and unplugged from the wall
outlet before making or changing any
connections.
10mm
Using external antennas
AM loop
antenna
To improve FM reception
Connect an external FM antenna.
FM wire
AM
LOOP
FM UNBAL
75
Ω
antenna
AUX
CD
IN
DIGITAL
OUT
OPT IN
ANTENNA
MONITOR O
One-touch
PAL connector
75Ω coaxial
cable
OPT
OUT
VCR
DVR
/
OUT
IN
2
CONTROL
(CD-R/TAPE/MD)
O
IN
IN
IN
VIDEO
OPT
VC
DV
AM
LOOP
FM UNBAL
75
IN
IN
1
TV
/
OUT
Ω
SAT
(TV
/
I
SAT)
ASSIGNABLE
COAX
2
DVD
MONITOR
OUT
T
/
LD
DIGITAL
IN
S
FRONT
(CD)
D
V
D
7.1CH
REC INPUT
SUB
WOOFER
COAX
ANTENNA
DV
LD
1
IN
CD-R
TAPE
OUT
IN
PREOUT
(DVD
/LD)
/
I
/
MD
S-VIDEO
PLAY
R
AUDIO
L
To improve AM reception
Connect a 5–6 metre length of vinyl-coated
wire to the AM antenna terminal without
disconnecting the supplied AM loop antenna.
FM wire antenna
Connect the FM wire antenna and fully extend
vertically along a window frame or another
suitable place that gives good reception.
For the best possible reception, suspend
horizontally outdoors.
Outdoor
antenna
AM loop antenna
Assemble the antenna and connect to the
receiver. Attach (if necessary) and face in the
direction that gives the best reception.
5–6m
Indoor antenna
(vinyl-coated wire)
AM
LOOP
FM UNBAL
75
Ω
ANTENNA
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Connecting up
Connecting the speakers (VSX-D712)
A complete setup of six speakers (including the subwoofer) is shown below, but everyone’s
home setup will vary. Simply connect the speakers you have in the manner shown below. The
receiver will work with just two stereo speakers (the front speakers in the diagram) but using at
least three speakers is recommended, and a complete setup is best. If you’re not using a
subwoofer, change the front speaker setting (see Speaker setting on page 44) to large.
Make sure you connect the speaker on the right to the right terminal and the speaker on the left
to the left terminal. Also make sure the positive and negative (+/–) terminals on the receiver
match those on the speakers.
Be sure to complete all connections before connecting this unit to the AC power source.
• Use speakers with a nominal impedance of 8 Ω to 16 Ω.
Front speakers
Center speaker
C
Surround speakers
L
R
LS
RS
AM
LOOP
FM UNBAL
OUT
MONITOR OUT
SURROUND
DVD 5.1CH INPUT
OUT
IN
VCR
DVR
/
OUT
IN
CONTROL
OUT
VIDEO
OPT
VCR
DVR
/
FROT
CENTER
SURROUND
FRONT
R
L
R
L
R
L
IN
IN
1
S
P
E
TV
/
OUT
SAT
(
T
V
/
IN
IN
IN
SAT
)
ASSIGNABLE
COAX
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
2
SAT
IN
FRONT
A
A
K
(
C
D
)
D
V
D
B
5.1CH
SUB
WOOFER
COAX
REC INPUT
DVD
LD
/
1
IN
CD-R
E
R
S
OUT
IN
PREOUT
SURROUND
BACK
(
D
V
D
)
/
TAPE
IN
/
L
D
/
MD
PLAY
S-VIDEO
R
AUDIO
L
VSX-D712
SW
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
04
Connecting the speakers (VSX-D812/D912)
A complete setup of eight speakers (including the subwoofer) is shown below, but everyone’s
home setup will vary. Simply connect the speakers you have in the manner shown below. The
receiver will work with just two stereo speakers (the front speakers in the diagram) but using at
least three speakers is recommended, and a complete setup is best for surround sound. If
you’re not using a subwoofer, change the front speaker setting (see Speaker setting on page 44)
to large.
Make sure you connect the speaker on the right to the right terminal and the speaker on the left
to the left terminal. Also make sure the positive and negative (+/–) terminals on the receiver
match those on the speakers.
Be sure to complete all connections before connecting this unit to the AC power source.
• Use speakers with a nominal impedance of 8 Ω to 16 Ω.
Front speakers
Center speaker
C
Surround speakers
Surround back speakers
SBL SBR
L
R
LS
RS
CEN-
SUB WOOFER
TER
AUX
IN
PREO
SURROUD
BA
L
L
DIGITAL
OUT
SURROUND
OPT
R
MONITOR OUT
SURROUN
BAC
L
OPT
OUT
VCR
DVR
/
OUT
IN
2
R
R
DVD 7.1CINPUT
CONTROL
FROT
SURROUND
CENTER
(
C
D
-
R
/
T
A
P
E
/
M
D
)
OUT
IN
IN
IN
VIDEO
OPT
1
VCR
DVR
/
FROT
CENTER
SURROUND BACK
SURROUND
FRONT
IN
IN
R
L
R
L
R
L
R
L
S
P
E
TV
/
OUT
SAT
(
T
V
/
T
IN
SA
)
ASSIGNABLE
COAX
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
2
SAT
IN
FRONT
A
A
K
S
I
N
L
E
(
C
D
)
D
V
D
SEE INSTCTION
B
7.1CH
REC INPUT
MANL
SUB
WOOFER
COAX
DVD
LD
/
1
IN
CD-R
TAPE
E
R
S
OUT
IN
PREOUT
(
D
V
D
)
/
IN
/
L
D
/
MD
S-VIDEO
PLAY
R
AUDIO
L
VSX-D812/D912
Passive
subwoofer
or single
back
Powered subwoofer
SW
TV
INPUT
speaker
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Connecting up
A and B speaker systems
The receiver has two speaker systems: A and
B. A is the main system supporting the full
speaker setup. If you switch on both A and B
speaker systems, only the front speakers and
the (active) subwoofer will be audible. No
sound will come from the center, surround, or
surround back speakers, but multi-channel
sources will be down-mixed to the active
speakers so no sound will be lost. Similarly, if
you choose just the B system you‘ll only hear
the front speakers connected to the B system
and multi channel sources will be down-
mixed to these two speakers.
• When using the speaker on your TV as the
center speaker (C), connect the CENTER
PREOUT jack on this unit to the audio
input jack on your TV. In this case the
center speaker shown is unnecessary.
• If you are using only one surround back
speaker, connect the positive wire to the
right channel (+) terminal, and the
negative wire to the left channel (–)
terminal (see illustration on page 11).
• If you select subwoofer (SB SW) in the
Surround back speaker setting on page 45
you can hook up a subwoofer instead of
speakers to the surround back speaker
terminals. Connect the positive wire to the
right channel (+) terminal, and the
•
Press the SPEAKERS button on the
front panel to switch between speaker
systems (A, B or both).
negative wire to the left channel (–)
terminal (see illustration on page 11).
Hints on speaker placement
Speakers are usually designed with a
particular placement in mind. Some are
designed to be floorstanding, while others
should be placed on stands to sound their
best. Some should be placed near a wall;
others should be placed away from walls. We
have provided a few tips on getting the best
sound from your speakers (following), but you
should also follow the guidelines on
Speaker terminals
1
2
3
10mm
placement that the speaker manufacturer
provided with your particular speakers to get
the most out of them.
1
2
Twist exposed wire strands together.
Loosen speaker terminal and insert
• Place the front left and right speakers at
equal distances from the TV.
exposed wire.
Make sure that all the bare speaker wire is
twisted together and inserted fully into the
speaker terminal. If any of the bare speaker
wire is touching the back panel when you
switch the unit on, the power may cut off as a
safety measure. Use good quality speaker
wire to connect the speakers to the receiver.
• When placing speakers near the TV, we
recommend using magnetically shielded
speakers to prevent possible interference,
such as discoloration of the picture when
the TV is switched on. If you do not have
magnetically shielded speakers and
notice discoloration of the TV picture,
move the speakers farther away from the
TV.
3
Tighten terminal.
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
04
• Place the center speaker above or below
the TV so that the sound of the center
channel is localized at the TV screen.
Overhead view of speaker setup
Front
Left
Front
Right
Center
• If possible, place the surround speakers
slightly above ear level.
• Try not to place the surround speakers
further away from the listening position
than the front and center speakers. Doing
so can weaken the surround sound effect.
Subwoofer
Surround
Left
Surround
Right
• To achieve the best possible surround
sound, install your speakers as shown
below. Be sure all speakers are installed
securely to prevent accidents and
improve sound quality.
Listening Position
Surround Back Left
Surround Back Right
Single Surround Back Speaker
• If you choose to install the center speaker
on top of the TV, be sure to secure it with
putty, or by other suitable means, to
reduce the risk of damage or injury
resulting from the speaker falling from the
TV in the event of external shocks such as
earthquakes.
3-D view of 6.1 channel speaker setup
3-D view of 7.1 channel speaker setup
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Connecting up
Connecting additional amplifiers
This receiver has more than sufficient power for any home use, however it is possible to add
additional amplifiers to every channel on the VSX-D812/D912 or the surround back channel of
the VSX-D712. Make the connections shown below to add amplifiers to power your speakers.
Always make sure that the receiver is switched off and unplugged from the wall outlet before
making or changing any connections.
• The arrows indicate the direction of the audio signal.
VSX-D712
CEN-
TER
SUB WOOFER
AM
LOOP
FM UNBAL
75
Ω
AUX
CD
IN
Powered
subwoofer
DIGITAL
OUT
IN
OPT
ANTENNA
R
L
MONITOR OUT
SURROUND
INPUT
DVD 5.1CH INPUT
OUT
IN
VCR
DVR
/
OUT
IN
CONTROL
OUT
VIDEO
OPT
VCR
DVR
/
FRONT
R
L
IN
IN
1
S
P
E
TV
/
OUT
SAT
(TV
/
IN
IN
IN
SAT)
ASSIGNABLE
COAX
2
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
SAT
IN
FRONT
A
A
K
(CD)
D
V
D
5.1CH
SUB
WOOFER
COAX
REC INPUT
DVD
LD
/
1
IN
CD-R
E
R
S
Surround back
channel amplifier
or powered speaker
OUT
IN
PREOUT
SURROUND
BACK
(DVD
/LD)
/
TAPE
IN
/
MD
ANALOG IN
PLAY
S-VIDEO
R
AUDIO
L
ANALOG IN
Front channel
amplifier
L
R
VSX-D812/D912
ANALOG IN
AM
FM UNBAL
75
Surround channel
amplifier
LOOP
Ω
AUX
IN
PREOUT
SURROUND
BACK
L
L
DIGITAL
OUT
/
CD
L
R
IN
OPT
ANTENNA
M
OPT
OUT
IN
VCR
DVR
/
OUT
IN
2
R
R
ANALOG IN
CONTROL
FRONT
SURROUND
CENTER
(CD-R/TAPE/MD)
Surround back
channel amplifier
VIDEO
OPT
IN
OUT
ACK
SURROUND
FRONT
L
R
L
R
L
1
TV
/
SAT
(TV
/
IN
IN
SAT)
IN
ASSIGNABLE
COAX
2
DVD
MONITOR
OUT
/
LD
DIGITAL
IN
FRONT
L
E
(CD)
D
V
D
CTION
B
L
7.1CH
REC INPUT
SUB
WOOFER
COAX
1
IN
CD-R
TAPE
OUT
IN
PREOUT
(DVD
/LD)
/
ANALOG IN
/
MD
Center channel
amplifier
S-V
PLAY
R
AUDIO
L
INPUT
Powered
subwoofer
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting up
04
Operating other Pioneer
components
• To hear sound only from the pre-outs,
disconnect any speakers that are
connected directly to the receiver.
By connecting a control cord (optional), you
can point the remote controls of other Pioneer
components at the receiver’s remote sensor.
The remote control signals are received by the
remote sensor of this unit, and sent to the
other devices via the CONTROL OUT terminal
of the receiver.
• If you’re not using a subwoofer, change
the front speaker setting (see Speaker
setting on page 44) to large.
• VSX-D712 only – If you connect to a
surround back speaker, make sure the
Surround back speaker setting on page 45
is switched on and set to the proper
speaker size.
CONTROL
OUT
IN
IN
CONTROL
OUT
Receiver
• These speaker terminals are hazardous
when live. To prevent the risk of electric
shock when connecting or disconnecting
the speaker cables, disconnect the power
cord.
Other Pioneer products
with CONTROL terminals
Remote
control
unit
Connect to CONTROL
terminal of other
compatible Pioneer products
Power cord caution
Handle the power cord by the plug. Do not
pull out the plug by tugging the cord and
never touch the power cord when your hands
are wet as this could cause a short circuit or
an electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or
pinch the cord. Never make a knot in the cord
or tie it with other cords. The power cords
should be routed such that they are not likely
to be stepped on. A damaged power cord can
cause a fire or give you an electrical shock.
Check the power cord once in a while. When
you find it damaged, ask your nearest Pioneer
authorized service center or your dealer for a
replacement.
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Controls and displays
CChaoptnert5r: ols and displays
Front panel
1
2
3
4
5
6
MULTI JOG
DVD/LD
TV/SAT
VCR/DVR
TUNER
VIDEO
AUX
ENTER
CD-R/
TAPE/MD
CD
MASTER VOLUME
STANDBY
DOWN
UP
STANDBY/ON
PHONES
8
7
9
10
11
12 13 14 15 16 17
ADVANCED
SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
QUICK
SETUP
TONE
STATION
TUNING
STANDARD
SPEAKERS
MULTI JOG
PHONES SURR.
VIDEO INPUT
LISTENING MODE
PTY
SEARCH
EON
MODE
TUNER EDIT
MULTI JOG
CLASS
BAND
MPX
SETUP
MIC
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
26 25 24 23 22 21
20 19
18
1
ꢀ STANDBY/ON
5
6
ENTER
MULTI JOG dial
Switches the receiver between on and
standby.
The MULTI JOG dial performs a number of
tasks. Use it to select options after pressing
TONE, QUICK SETUP or TUNER EDIT.
2
Input select buttons
Press to select an input source.
3
STANDBY indicator
7
MASTER VOLUME
Lights when the receiver is in standby.
8
PHONES jack
4
Remote sensor
Use to connect headphones. When the
headphones are connected, there is no sound
output from the speakers.
Receives the signals from the remote control.
28
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
05
9
STATION +/– buttons
17 QUICK SETUP
Selects station presets when using the tuner
(page 55).
See Using the Quick Setup on page 12.
18 VIDEO INPUT
10 TUNING +/– buttons
Selects the frequency when using the tuner
(page 52).
See Connecting to the front panel video
terminal on page 20.
19 DIGITAL IN
11 LISTENING MODE buttons
VSX-D912 only
See Connecting to the front panel video
terminal on page 20.
STANDARD
Press for Standard decoding and to
switch between the various Pro Logic II
and Neo:6 options (page 37).
20 SETUP MIC
VSX-D912 only
ADVANCED SURROUND
Use to switch between the various
surround modes (page 38).
Connect the microphone supplied with your
system to the SETUP MIC jack when using the
auto surround setup (MCACC) (page 14).
STEREO/DIRECT
21 EON MODE
Switches between direct and stereo
playback. Direct playback bypasses the
tone controls and channel levels for the
most accurate reproduction of a source
(page 38).
Use to search for different programs that are
transmitting traffic or news information (this
search method is called EON) (page 57).
22 PTY SEARCH
Use to search for different program types in
RDS mode (page 56).
12 SIGNAL SELECT
Use to select an input signal (page 36).
23 MPX
13 MIDNIGHT/LOUDNESS
Press to receive a radio broadcast in mono
(page 52).
Use Midnight when listening to movie
soundtracks at low volume. Use Loudness to
boost the bass and treble at low volume
(page 41).
24 BAND
Switches between AM and FM radio bands
(page 52).
14 SPEAKERS
Use to cycle through the speaker system:
A ꢂ B ꢂ A+B (page 24)
25 CLASS
Switches between the three banks (classes)
of station presets (page 53).
15 SB CH MODE
26 TUNER EDIT
Press to memorize and name a station for
recall (page 53).
Selects the Surround back channel mode
(page 39) and the Virtual Surround Back
(VSB) mode (page 40).
16 TONE
Press this button to access the bass and
treble controls, which you can then adjust
with the MULTI JOG dial (page 41).
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Controls and displays
Display
1
2
3
4
5 6
7
8
9
10 1112 13 14
RFATT EON
RDS
SP A B
15 16
17
18
19
20
1
SIGNAL SELECT indicators
3 2DIGITAL
Lights to indicate the type of input signal
assigned for the current component:
When the STANDARD mode of the receiver is
on, this lights to indicate decoding of a Dolby
Digital signal.
AUTO
Lights when AUTO signal select is on.
4 2PRO LOGIC II
When the (STANDARD) Pro Logic II mode of
the receiver is on, this lights to indicate Pro
Logic II decoding.
SB
Depending on the source, this lights
when a signal with surround back
channel encoding is detected.
5
VIR.SB
Lights during Virtual surround back
processing.
DIGITAL
Lights when a digital audio signal is
detected.
6
ATT
Lights when INPUT ATT is used to attenuate
(reduce) the level of the analog input signal.
2DIGITAL
Lights when a Dolby Digital encoded
signal is detected.
7
DIRECT
Lights when source direct playback is in use.
Direct playback bypasses the tone controls
and channel levels for the most accurate
reproduction of a source.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS encoded
audio signals is detected.
8
MIDNIGHT
Lights during Midnight listening.
2
DTS
9
SLEEP
When the STANDARD mode of the receiver is
on, this lights to indicate decoding of a DTS
signal.
Lights when the receiver is in sleep mode.
10 RF ATT
Lights when the RF attenuator is on (page 52).
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
05
11 Speaker indicator
Shows the speaker system currently in use.
Depending on your level settings for each
channel, the maximum volume can range
between –10 dB and –0 dB.
12 EON
When the EON mode is set. the EON indicator
lights, but during actual reception of an EON
broadcast the EON indicator will flash.
13
indicator
The indicator lights to inform you that the
currently tuned station carries the EON data
service.
14 RDS
Lights when an RDS broadcast is received.
15 Character display
16 Neo:6
When the (STANDARD) NEO:6 mode of the
receiver is on, this lights to indicate NEO:6
processing.
17 ADV.SURR. (Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
18 LOUDNESS
Lights when LOUDNESS has been selected.
19 TUNER indicators
STEREO
Lights when a stereo FM broadcast is
being received in auto stereo mode.
MONO
Lights when the mono mode is set using
the MPX button.
TUNED
Lights when a broadcast is being
received.
20 Master volume level
Shows the overall volume level. ---dB
indicates the minimum level, and - 0 dB
indicates the maximum level.
31
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Controls and displays
Remote control
RECEIVER
Switches the remote to control the
receiver (used to select the features such
as SLEEP, MCACC SETUP, etc). Also use
this button to set up surround sound
(page 43, page 49).
10
11
12
RECEIVER
SOURCE
INPUT SELECT
1
2
MULTI CONTROL
DVD/LD
C D
TV / SAT
VCR/DVR
TV CONT
RECEIVER
3
RECEIVER CONTROL buttons
CD-R/TAPE
TUNER
STANDARD
ADVANCED
STEREO/
DIRECT
MIDNIGHT/
LOUDNESS
STANDARD SURROUND
Press for Standard decoding and to
switch between the various Pro Logic II
and Neo:6 options (page 37).
TEST
CH
SELECT
MUTE
LEVEL
TONE
3
4
FL
EFFECT
DIMMER
RECEIVER CONTROL
ADVANCED SURROUND
Use to switch between the various
surround modes (page 38).
MASTER
VOLUME
TOP MENU
MENU
SETUP
TUNE
5
5
INPUT ATT
T.EDIT
STEREO/DIRECT
ST
ST
ENTER
6
Switches between direct and stereo
playback. Direct playback bypasses the
tone controls and channel levels for the
most accurate reproduction of a source
(page 38).
GUIDE
AUDIO
SUBTITLE
TUNE
MCACC
SETUP
SLEEP
A
RETURN
BAND
RF ATT
DISPLAY
CLASS
MPX
D.ACCESS
7
B
C
D
E
MIDNIGHT/LOUDNESS
Switches to Midnight or Loudness
listening (page 41).
DISC
ENTER
13
14
1
4
7
2
5
8
3
6
9
+
10
8
9
CH SELECT
Selects a speaker when setting up the
surround sound of the receiver (page 51).
0
TV CONTROL
CHANNEL
CHANNEL
VOLUME
LEVEL +/–
Adjusts the levels of the surround sound
of the receiver (page 51).
TEST TONE
RECEIVER
Sounds the test tone when setting up the
surround sound of the receiver (page 51).
1
RECEIVERꢀ
This switches between standby and on for this
receiver.
MUTE
Mutes the sound (or restores the sound if
it has been muted).
2
MULTI CONTROL buttons
Press to select control of other components
(see Controlling the rest of your system on
page 60).
EFFECT +/–
Adds or subtracts the amount of effect
with different advanced surround modes
(page 38).
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
05
FL DIMMER
Dims or brightens the display.
6
7
ꢃꢄꢁꢀ (TUNE +/–, ST +/–) /ENTER
Use the arrow buttons when setting up
your surround sound system (see
page 43). Also used to control DVD
menus/options and for deck 1 of a double
cassette deck player. Use the TUNE +/–
buttons to find radio frequencies and use
ST +/– to find preset stations (page 55).
4
5
MASTER VOLUME +/–
Use to set the listening volume.
Receiver and component control
buttons (Press the corresponding MULTI
CONTROL button first to access).
These controls function according to the
component you’ve selected.
Component/Tuner control buttons
The main buttons (ꢁ, ꢂ, etc.) are used to
control a component after you have selected
it using the MULTI CONTROL buttons. The
tuner/DTV controls above these buttons can
be accessed after you have selected the
corresponding MULTI CONTROL button
(TUNER or TV/SAT (when connected to
DTV)).
TOP MENU
Displays the disc ‘top’ menu of a DVD.
AUDIO
Changes the audio language or channel
with DVD discs.
MCACC SETUP
Use to setup your speaker system using
the multi-channel acoustic calibration
system.
RETURN
Returns to the last screen selected when
using a digital TV tuner.
MENU
BAND
Displays the disc menu of DVD-Video
discs. It also displays TV and DTV menus.
Switches between the tuner AM and FM
bands (page 52).
INPUT ATT
Attenuates (lowers) the level of an analog
input signal to prevent distortion.
RF ATT
Use to lower the input level of a radio
signal that is too powerful or contains
interference that causes the sound to
distort (page 52).
T.EDIT
Use to memorize and name a station for
recall using the STATION +/– buttons
(page 53).
DISPLAY
Use to switch the display between the
station preset name, frequency and RDS
data when using the tuner.
GUIDE
Displays the guides on a digital TV.
CLASS
SUBTITLE
Switches between the three banks
(classes) of radio station presets
(page 53).
Displays/changes the subtitles included
in multilingual DVD-Video discs.
SLEEP
MPX
Use to put the receiver in sleep mode and
select the amount of time before the
receiver turns off.
Switches between stereo and mono
reception of FM broadcasts. If the signal
is weak then switching to mono will
improve the sound quality (page 52).
33
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Controls and displays
D.ACCESS
After pressing, you can access a radio
station directly using the number buttons
(page 52).
8
Number buttons
Use the number buttons to directly select a
radio frequency (page 52) or the tracks on a
CD, DVD, etc.
9
CHANNEL +/–
Use to select channels when using a VCR,
DVR, etc.
10 INPUT SELECT
Use to select the input source.
11 LED
This lights when a command is sent from the
remote control.
12 SOURCEꢀ
Press to turn on/off other components
connected to the receiver.
13 DISC (ENTER)
The button’s use depends on the component
selected. It can be used to enter commands
for TV or DTV, and can also be used to select
a disc in a multi-CD player.
14 TV CONTROL buttons
These buttons are dedicated to control the TV
assigned to the TV CONT button. Thus if you
only have one TV to hook up to this system
assign it to the TV CONT MULTI CONTROL
button. If you have two TVs, assign the main
TV to the TV CONT button.
ꢀ
Use to turn on/off the power of the TV.
(TV CONTROL) INPUT SELECT
Use select the TV function.
CHANNEL +/–
Use to select channels.
VOLUME +/–
Use to adjust the volume on your TV.
34
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing sources
06
CPhlaapteyr i6n: g sources
You can identify Dolby Digital software by the
1or marks. Most Dolby
Introduction to Sound Modes
There are three basic sound options: Stereo/
Direct (STEREO/DIRECT), Standard (STAN-
DARD) or Advanced Surround (ADVANCED
SURROUND).
Surround software is marked 3, but
unmarked software may also incorporate
Dolby Surround. Depending on the source
and the sound mode you have selected, you
may not get sound from the surround back
speakers in your setup. For more on this, refer
to Using the Virtual Surround Back mode (VSB)
on page 40 and Using the Surround Back
Channel (SB CH) on page 39.
Stereo/Direct
When you select STEREO or DIRECT, you will
hear the source through just the front left and
right speakers (and possibly your subwoofer
depending on your speaker settings). Dolby
Digital and DTS multichannel sources are
downmixed to stereo.
Choose one of the following to add depth to a
2 channel source:
In STEREO, you’ll hear the audio with your
surround settings and you can still use the
Midnight, Loudness, and Tone control func-
tions.
Pro Logic II Movie (MOVIE)
This mode gives 5.1 channel surround sound.
It is suitable for movies, especially those
recorded in Dolby Surround. The channel
separation and movement of surround effects
is comparable to Dolby Digital 5.1.
With DIRECT, you will bypass all effects and
surround settings so that the audio remains
as close to the source audio signal as
possible.
Pro Logic II Music (MUSIC)
This mode gives 5.1 channel surround sound
and is suitable for music. The surround effect
is more enveloping than Pro Logic II Movie.
• If you switch on Midnight listening, Loud-
ness, or the Tone controls when DIRECT is
selected, the receiver automatically
switches to STEREO.
Pro Logic (PROLOGIC)
This mode gives 4.1 channel surround sound.
It is less sensitive to the quality of the source
material, so may be useful when Pro Logic II
Movie/ Music modes don’t give good results.
Standard mode
The Standard mode can be used to decode
Dolby Digital, DTS, and Dolby Surround
sources.
The other surround sound options (next
column) can add multi-channel sound to
regular stereo sources.
Neo:6 Cinema (CINEMA)
This mode gives 6.1 channel surround sound
and is suitable for movies. The Neo:6 Cinema
mode delivers good channel separation for
movie soundtracks.
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Playing sources
Neo:6 Music (MUSIC)
Sports (SPORTS)
This mode gives 6.1 channel surround sound
and is suitable for music. The Neo:6 Music
mode plays the stereo source as is through
the front left/right speakers, and generates a
natural, ambient surround and center sound.
This is designed for sports programs with alot
of action, adding to the excitement by
bringing background action to the forefront.
Game (GAME)
Useful when playing video games. It works
especially well with sound moving from left to
right in game software with alot of movement.
Advanced Surround modes
These are designed to be used with multi-
channel surround sound audio/visual
sources (like DVDs and LDs). Most Advanced
Surround modes are designed to be used with
film soundtracks, but some modes are also
suited for music sources. Try different
settings with various soundtracks to see
which you like.
Expanded (EXPANDED)
This mode is especially designed to give
sound depth to stereo sources, and lets you
hear two-channel (stereo) signals as simu-
lated multi-channel surround sound. Use with
Dolby Pro Logic for a stereo surround effect.
You can also use with Dolby Digital sources
for a wider stereo field than the STANDARD
modes.
• Depending on the source and the sound
mode you have selected, you may not get
sound from the surround back speakers
in your setup. For more on this, refer to
Using the Virtual Surround Back mode
(VSB) on page 40 and Using the Surround
Back Channel (SB CH) on page 39.
6-Channel Stereo (6-STEREO)
This can be selected to give multi-channel
sound to a stereo source, using all of the
speakers in your setup.
Phones Surround (PHONES SURROUND)
When listening through headphones, you can
still get the effect of overall surround.
Advanced Movie (ADV. MOVIE)
Simulates the relaxed environment of a movie
theater, and is suitable for watching movies.
Choosing the input signal
• Default setting: AUTO
Advanced Music (ADV. MUSIC)
Simulates the acoustic environment of a large
concert hall and is suitable for music or
musical sources.
You need to hook up a component to both
analog and digital inputs on the rear of the
receiver to select between input signals.
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
SB CH
MODE
QUICK
SETUP
TONE
TV Surround (TV. SURR.)
MULTI JOG
PHONES SURR.
LISTENING MODE
VIDEO INPUT
This mode produces surround sound for both
mono and stereo TV sources. It is useful for
older movies recorded with mono
soundtracks.
PTY
SEARCH
EON
MODE
SETUP
MIC
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
36
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing sources
06
•
Press SIGNAL SELECT (front panel) to
Listening to multi-channel
playback
select the input signal corresponding to
the source component.
Each press cycles through the options as
follows:
RECEIVER
INPUT SELECT
AUTO
MULTI CONTROL
DVD/LD
TV/SAT
VCR/DVR
TV CONT
DVD 5.1 ch/
DVD 7.1 ch
CD
CD-R/TAPE
TUNER
DIGITAL
STANDARD
ANALOG
The AUTO setting automatically switches to
DIGITAL if a digital source is detected, other-
wise the signal select will be ANALOG.
DVD 5.1ch (VSX-D712) and DVD 7.1ch (VSX-
D812/D912) will only appear when DVD/LD is
selected.
When set to DIGITAL or AUTO, 2DIGITAL
lights when a Dolby Digital signal is input,
and DTS lights when a DTS signal is input.
1
2
3
Switch on the playback component.
Turn on the power of the receiver.
Select the source you want to play-
back.
Use the MULTI CONTROL buttons (or INPUT
SELECT).
• This receiver can only play back Dolby
Digital, PCM (32kHz–96 kHz) and DTS
digital signal formats (however, only the
VSX-D812 and VSX-D912 can decode DTS
96kHz/24 bit signal formats). With other
digital signal formats, set to ANALOG.
4
Press STANDARD.
If the source is Dolby Digital, DTS, or Dolby
Surround encoded, the proper decoding
format will automatically be selected and
shows in the display.
• You may get digital noise when a LD or CD
player compatible with DTS is playing an
analog signal. To prevent noise, make the
proper digital connections (page 17) and
set the signal input to DIGITAL.
If you are listening to a two channel source,
each press changes the display as follows:
MOVIE
(2Pro Logic II)
• Some DVD players don’t output DTS
signals. For more details, refer to the
instruction manual supplied with your
DVD player.
MUSIC
MUSIC
(Neo:6)
(2Pro Logic II)
CINEMA
PROLOGIC
(Neo:6)
Refer to page 35 for more details about each
mode.
37
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Playing sources
5
Start playback of the component you
•
Press ADVANCED SURROUND repeat-
selected in step 1.
edly to cycle the sound options.
Each press changes the display as follows:
ADV.
MOVIE
ADV.
MUSIC
TV SURR.
SPORTS
• You can’t use the STANDARD mode with
96kHz PCM or DTS 96kHz/24-bit stereo
sources.
6-STEREO
EXPANDED
GAME
Refer to page 36 for more details about each
surround effect.
Using Stereo/Direct
When you select STEREO or DIRECT, you will
hear the source through just the front left and
right speakers (and possibly your subwoofer
depending on your speaker settings). Dolby
Digital and DTS multichannel sources are
downmixed to stereo. See page 35 for more
on these modes.
• If you press ADVANCED SURROUND
when the headphones are connected, the
PHONES SURROUND mode will automat-
ically be selected.
•
Press STEREO/DIRECT repeatedly to
• You can’t use the Advanced Surround
listening modes with 96kHz PCM or DTS
96kHz/24 bit signal formats.
switch between the two options.
• If you switch on Midnight listening, Loud-
ness, or the Tone controls when DIRECT is
selected, the receiver automatically
switches to STEREO.
• The Advanced Surround effects can be
adjusted in the range of 10 to 90 by
pressing EFFECT +/– . The effect level can
be set for each Advanced Surround mode.
The Standard (STANDARD) mode cannot
be changed.
Using Advanced Surround
When you select one of the Advanced
Surround options, Dolby Pro Logic, Dolby
Digital and DTS decoding is done automati-
cally corresponding to the input signal. Use
Advanced Surround to add effects to the
surround sound.
38
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing sources
06
•
Press SB CH MODE (front panel)
Using the Surround Back
Channel (SB CH)
repeatedly to cycle the surround back
channel options.
Each press cycles through the options as
follows:
• Default setting: SB ON (VSX-D812/D912),
SB OFF (VSX-D712)
You can have the receiver automatically
switch to Dolby Digital EX or DTS-ES
decoding for 6.1 encoded sources (SB
AUTO), or you can choose to listen to other
kinds of sources (for example, 5.1 encoded
material) with 6.1 encoding (SB ON). With 5.1
encoded sources, a surround back channel
will be generated, but the material may sound
better in the 5.1 format for which it was origi-
nally encoded, in which case you can simply
switch the surround back channel off (SB
OFF).
SB ON
SB OFF
SB AUTO
• You can’t use the surround back channel
if the Surround back speaker setting on
page 45 is set to SB .or SB SW (VSX-
D812/D912 only).
The table indicates when you will hear the
surround back channel.
• You can’t hear the surround back channel
with DTS 96kHz/24 bit sources.
STANDARD
ADVANCED SURROUND
All modes
PL ll MOVIE/
PL ll MUSIC/
PRO LOGIC
SB CH
Type of source
STANDARD
decoding
NEO:6 CINEMA/
NEO:6 MUSIC
MODE
DTS-ES/Dolby Digital
Matrix encoded
multi-channel sources
with 6.1 surround
ON
AUTO
ON
Dolby Digital/DTS
encoded multi-channel
sources
AUTO
ON
Dolby Digital/DTS
encoded stereo sources,
Stereo sources
AUTO
ON
Analog 2-channel
(stereo) source
AUTO
39
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Playing sources
Each press cycles through the options as
follows:
Using the Virtual Surround
Back mode (VSB)
Selecting this mode allows you to hear a
virtual back channel through your surround
speakers. For example, you can choose to
listen to sources with no surround back
channel information (for example, 5.1
encoded material) with emulated 6.1
encoding (VSB ON). Sometimes the material
may sound better in the 5.1 format for which
it was originally encoded. In this case you can
have the receiver only apply this effect to 6.1
encoded sources like Dolby Digital EX or DTS-
ES (VSB AUTO), or you can simply switch it
off (VSB OFF).
VSB ON
VSB OFF
VSB AUTO
• You can’t use the Virtual Surround Back
mode if the Speaker setting on page 44 is
set to S .
• You can only use the Virtual Surround
Back mode if the Surround back speaker
setting on page 45 is set to SB or SB SW
(VSX-D812/D912 only).
The table indicates when you will hear the
virtual surround back channel.
• You can’t adjust the surround back
channel level when you’re listening to the
virtual surround back channel.
•
Press SB CH MODE (front panel)
repeatedly to cycle the virtual surround
back channel options.
STANDARD
ADVANCED SURROUND
All modes
Virtual
PL ll MOVIE/
PL ll MUSIC/
PRO LOGIC
Surround
Type of source
STANDARD
decoding
NEO:6 CINEMA/
NEO:6 MUSIC
Back mode
DTS-ES/Dolby Digital
Matrix encoded
multi-channel sources
with 6.1 surround
ON
AUTO
ON
Dolby Digital/DTS
encoded multi-channel
sources
AUTO
ON
Dolby Digital/DTS
encoded stereo sources,
Stereo sources
AUTO
ON
Analog 2-channel
(stereo) source
AUTO
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing sources
06
1
Press TONE to select the frequency you
Using Midnight and Loudness
listening
want to adjust.
Each press switches between BASS and
TREBLE.
The Midnight listening feature allows you to
hear effective surround sound of movies at
low volume levels. The effect automatically
adjusts according to the volume at which
you’re listening.
2
Use the MULTI JOG dial to change the
amount of bass or treble as necessary.
Wait about five seconds for your changes to
be input automatically.
The Loudness listening feature can be used to
get good bass and treble from music sources
at low volume levels.
•
Press MIDNIGHT/LOUDNESS.
• You can only use the tone controls when
STEREO/DIRECT is selected. DIRECT will
switch to STEREO when the tone controls
are used.
Each press cycles through the effects as
follows:
MIDNIGHT
Off
• The tone controls affect SPEAKER A only.
They can’t be used when SPEAKER A is
switched off.
LOUDNESS
Playing other sources
• You can’t use MIDNIGHT/LOUDNESS
when DVD 5.1 ch/DVD 7.1 ch has been
selected, or when listening to a DTS
96kHz/24 bit source.
RECEIVER
INPUT SELECT
MULTI CONTROL
DVD/LD
CD
TV/SAT
VCR/DVR
TV CONT
CD-R/TAPE
TUNER
Using the tone controls
Depending on what you are listening to, you
may want to adjust the bass or treble using
the front panel tone control.
MULTI JOG
ENTER
MASTER VOLUME
1
Turn on the power of the playback
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
SB CH
MODE
QUICK
SETUP
TONE
DOWN
UP
component.
MULTI JOG
VIDEO INPUT
SETUP
MIC
2
3
Turn on the power of the receiver.
Select the source you want to play-
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
back.
Use the MULTI CONTROL buttons (or INPUT
SELECT).
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Playing sources
4
Start playback of the component you
selected in step 1.
• When playback from the multi-channel
inputs is selected, you can’t use the
INPUT ATT, TONE, and MIDNIGHT/
LOUDNESS buttons, as well as the STAN-
DARD, ADVANCED SURROUND, and
STEREO/DIRECT sound modes.
Selecting the multi-channel
analog inputs
If you have connected a decoder or a DVD
player with multi-channel analog outputs to
this receiver (page 19), you must select the
analog multi-channel inputs for surround
sound playback.
• When playback from the multi-channel
inputs is selected, only the volume and
channel levels can be set.
Using the sleep timer
DVD/LD
TV/SAT
VCR/DVR
TUNER
VIDEO
AUX
The sleep timer switches the receiver into
standby after a specified amount of time so
you can fall asleep without worrying about the
receiver being left on all night. Use the remote
control to set the sleep timer.
CD-R/
TAPE/MD
CD
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
STATION
TUNING
STANDBY
PHONES SURR.
LISTENING MODE
STANDBY/ON
PTY
SEARCH
EON
MODE
TUNER EDIT
CLASS
BAND
MPX
MULTI JOG
PHONES
1
Press RECEIVER.
2
Press SLEEP repeatedly to set the sleep
time.
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
SB CH
MODE
QUICK
SETUP
TONE
90 min
Off
60 min
30 min
MULTI JOG
PHONES SURR.
LISTENING MODE
VIDEO INPUT
PTY
SEARCH
EON
MODE
SETUP
MIC
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
1
2
Press DVD/LD.
Press SIGNAL SELECT repeatedly to
• You can check the remaning sleep time at
any time by pressing SLEEP once.
Pressing repeatedly will cycle through the
sleep options again.
select DVD 5.1ch/DVD 7.1ch.
To cancel playback from the multi-channel
inputs, use the SIGNAL SELECT button to
select a different input signal.
• You can also switch off the sleep timer
simply by switching off the receiver.
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
07
CSheapttetri7n: g up
Speaker setting (page 44)
Specify the number and type of speakers
you have connected.
Choosing your receiver setup
To ensure the best possible surround sound,
be sure to complete the following set up
operations. This is particularly important
when using DTS and Dolby surround. You
only need to make these settings once (unless
you change the placement of your current
speaker system or add new speakers, etc.).
Refer to the following pages for details on
each of the settings.
Surround back speaker setting
(page 45)
Specify your surround back speaker/
surround back subwoofer setup.
Subwoofer setting (page 45)
Specify how the subwoofer is used.
Crossover frequency setting (page 45)
Determine which frequencies will be sent
to the subwoofer (or large speakers).
RECEIVER
LFE attenuator setting (page 46)
Choose the attenuator level for the LFE
channel.
RECEIVER
Front left speaker distance setting
(page 46)
Specify the distance from your listening
position to your front left speaker.
Center speaker distance setting
(page 46)
ENTER
Specify the distance from your listening
position to your center speaker.
1
on.
Press RECEIVERꢀ to turn the power
Front right speaker distance setting
(page 47)
Specify the distance from your listening
position to your front right speaker.
The STANDBY indicator goes out.
2
Press RECEIVER.
3
Use ꢃ or ꢄ to choose the option you
Surround right speaker distance
setting (page 47)
Specify the distance from your listening
position to your surround right speaker.
want to adjust.
It will be easiest to adjust each of the settings
in turn, following the order below (and on the
following pages). The current setting is shown
for each option as you cycle through the
display.
43
En
Download from Www.Somanuals.com. All Manuals Search And Download.
07
Setting up
Surround back speaker distance
setting (page 47)
5
Repeat steps 3 and 4 to adjust other
setup options.
Specifies the distance from your listening
position to your surround back speakers.
6
exit.
When you’re done, press ENTER to
Surround left speaker distance setting
(page 47)
Specify the distance from your listening
position to your surround left speaker.
• The setting display is automatically exited
after 3 minutes of inactivity.
Subwoofer distance setting (page 47)
Specify the distance from your listening
position to your subwoofer.
Speaker setting
• Default setting: FL-CS-SS (If a subwoofer
is detected when you turn the receiver on,
the default is FS-CS-SS.)
Dynamic range control setting
(page 48)
Compress the dynamic range of the
sound track.
You must let the receiver know how many
speakers you have, and how big they are. The
size you choose (large or small) determines
how much bass is sent from the receiver to
the speakers.
Dual mono setting (page 48)
Isolate one channel when listening to
discs with dual mono encoding.
Surround back channel input setting
(VSX-D812/D912 only) (page 48)
Specify the number of surround back
analog inputs you have connected.
In the display, F, C, and S refer to front, center,
and surround speakers respectively. Speaker
size is denoted as L for large speakers, S for
small speakers, and (asterisk) if no speaker
is connected.
Digital input settings (page 48)
Specify the components to be assigned to
the digital inputs (below).
•
•
•
•
Coaxial digital input 1 setting
Coaxial digital input 2 setting
Optical digital input 1 setting
Optical digital input 2 setting (VSX-
• If the cone size (diameter) of the speaker
is larger than 15 cm, set the speaker size
to L.
• If you’re not using a subwoofer, we
recommend setting the front speakers to
D812/D912 only)
L.
4
Use ꢀ or ꢁ to adjust the setting.
The setting is entered automatically.
•
Cycle through the available choices
using ꢀ or ꢁ and choose a configuration
that matches your speaker setup.
44
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
07
One of the following configurations should
match your setup:
• To select SB L, you must have SL selected
in the Speaker setting.
FS-CS-SS
FS-CS-S
FS-C -SS
FS-C -S
FL-CL-SL
FL-CL-SS
FL-CL-S
FL-C -S
FL-C -SS
FL-C -SL
FL-CS-S
FL-CS-SS
Subwoofer setting
You can choose whether the subwoofer is
used or not. Use the plus (PLUS) setting for
extra bass.
•
Use ꢀ or ꢁ to select subwoofer YES,
PLUS or NO.
YES
PLUS
NO
FL-CS-SL
Surround back speaker setting
• Default setting: S (VSX-D812/D912),
• If you chose the small front speaker
setting, SW YES is automatically set and
locked.
(VSX-D712)
• When you select the PLUS setting, you
will get the bass sounds from the
subwoofer even if the front speakers are
set to L.
You must let the receiver know if surround
back speaker(s) have been connected, and
how big they are. The size you choose (large or
small) determines how much bass is sent
from the receiver to the speakers. If you have
connected a surround back subwoofer (VSX-
D812/D912), you should select the surround
back subwoofer setting (SB SW) from the
Crossover frequency setting
• Default setting: 100 Hz
Crossover frequency is the point where the
receiver divides the high and low sounds (the
frequencies) between the speakers. Since
most smaller speakers can’t handle deep
bass tones, you can send these sounds to the
subwoofer (or if you don’t have a subwoofer,
the large (L) speakers in your system) instead
of the speakers set to small (S) in your setup.
Choose the point at which you want the
frequency routed to the subwoofer (or L
speakers).
options. Choose (asterisk) if no speaker is
connected.
•
Use ꢀ or ꢁ to select SB S, SB , SB SW
or SB L.
SB S
SB
SB L
* VSX-D812/D912 only
SB SW*
45
En
Download from Www.Somanuals.com. All Manuals Search And Download.
07
Setting up
We recommend setting this to 200Hz if your
S speakers are smaller bookshelf-type
speakers.
•
Use ꢀ or ꢁ to set the attenuation
level (0 dB, 10 dB or
dB(∞)).
0 dB
10 dB
•
Use ꢀ or ꢁ to specify the crossover
frequency for your small speakers (100 Hz,
150 Hz or 200 Hz).
∞
(displays
)
100Hz
150Hz
200Hz
• When
∞
is selected (
appears in the
display), LFE cannot be heard.
100Hz
Sends bass frequencies below 100 Hz to
the subwoofer (or L speakers).
Front left speaker distance setting
• Default setting: 2 m
150Hz
Sends bass frequencies below 150 Hz to
the subwoofer (or L speakers).
Sets the distance from the front left speaker to
the listening position.
200Hz
•
Use ꢀ or ꢁ to set the distance of the
Sends bass frequencies below 200 Hz to
the subwoofer (or L speakers).
front left speaker from the main listening
position (within the range of 0.1 m to 9.0
m).
Center speaker distance setting
• If all speakers (front, center, and
surround) are set to L, the crossover
frequency can’t be set because there are
• Default setting: 2 m
The center speaker is normally placed directly
in the front of the listening room and closer to
the listening position than the front speakers.
This means that the sound from the center
speaker will be heard before the front
speakers. To prevent this, set the center
speaker distance setting to delay the sound
from the center speaker so that the sound
from the front and center speakers will be
heard at the same time.
no S speakers (
appears in the
display).
LFE attenuator setting
• Default setting: 0 dB
Dolby Digital and DTS audio sources include
ultra-low bass tones. Set the LFE attenuator
as necessary to prevent the ultra-low bass
tones from distorting the sound from the
speakers.
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
07
•
Use ꢀ or ꢁ to set the distance of the
Surround back speaker distance
setting
center speaker from the main listening
position (within the range of 0.1 m to 9.0
m).
• Default setting: 2 m
You should set the distance of the surround
back speakers accurately to hear sounds
coming from all speakers at the same time.
•
Use ꢀ or ꢁ to set the distance of the
• When C is selected in the speaker
setting, the center speaker distance can’t
be set.
surround back speakers from the main
listening position (within the range of 0.1
m to 9.0 m).
Front right speaker distance setting
• Default setting: 2 m
Sets the distance from the front right speaker
to the listening position.
• When SB SW (VSX-D812/D912 only) or
SB is selected in the surround back
speaker setting, the surround back
speaker distance can’t be set.
•
Use ꢀ or ꢁ to set the distance of the
front right speaker from the main
listening position (within the range of 0.1
m to 9.0 m).
Surround left speaker distance
setting
• Default setting: 2 m
Surround right speaker distance
setting
• Default setting: 2 m
You should set the distance of the surround
speakers accurately to hear sounds coming
from all speakers at the same time.
You should set the distance of the surround
speakers accurately to hear sounds coming
from all speakers at the same time.
•
Use ꢀ or ꢁ to set the distance of the
surround left speaker from the main
listening position (within the range of 0.1
m to 9.0 m).
•
Use ꢀ or ꢁ to set the distance of the
surround right speaker from the main
listening position (within the range of 0.1
m to 9.0 m).
• When S is selected in the speaker
setting, the surround speaker distance
can’t be set.
• When S is selected in the speaker
setting, the surround speaker distance
can’t be set.
Subwoofer distance setting
• Default setting: 2 m
Like your speakers, you should set the
distance of the subwoofer accurately to hear
sounds from all speakers at the same time.
47
En
Download from Www.Somanuals.com. All Manuals Search And Download.
07
Setting up
•
Use ꢀ or ꢁ to set the distance of the
If Dolby Digital mode is switched on, you will
hear the channel you have selected (either
ch1 or ch2) through your center speaker. With
Dolby Digital mode off, or if you don’t have a
center speaker, you will hear the channel you
have selected through both front speakers. In
the L ch 1.R ch2 setting, the left front speaker
will play channel 1 and the right front speaker
will play channel 2.
subwoofer from the main listening posi-
tion (within the range of 0.1 m to 9.0 m).
• When SW NO is selected in the
subwoofer setting, the subwoofer
distance can’t be set.
•
Use ꢀ or ꢁ to cycle through the
possible dual mono settings.
Dynamic range control setting
• Default setting: OFF
Lch 1.R ch2
Dynamic range is the difference between the
loudest and softest sounds in any given
signal. With this setting, you can compress
the dynamic range, so that low level sounds
can be heard more easily (sounding relatively
louder) yet louder sounds won’t be too over-
bearing.
ch2
ch1
Surround back channel input
setting
(VSX-D812/D912 only)
•
Use ꢀ or ꢁ to set the dynamic range
control (OFF, MAX, or MID).
• Default setting: SB 2ch IN
You only have to make this setting if you are
using a seperate component for decoding
DVDs, and the component has only one
surround back channel output. If this is the
case, select SB 1ch IN, otherwise leave it set
to SB 2ch IN.
• When listening at low volumes, set to
MAX for maximum dynamic range
compression.
• Dynamic range control is effective only
when a Dolby Digital or DTS signal is
being played back.
•
Use ꢀ or ꢁ to select SB 2ch IN or SB
1ch IN.
Digital input settings
Dual mono setting
Here you tell the receiver what components
you have hooked up to the coaxial and optical
DIGITAL IN jacks on the back of the receiver.
•
Default setting: ch1
The dual mono setting can only be used when
listening to Dolby Digital and DTS signals
with dual mono encoding. It is sometimes
used when it is necessary to have one
language on one channel and a different
language on the other. With this setting you
can choose which channel in the dual mono
setting you want to listen to.
After you assign a component to a digital jack,
whenever you select that component, (for
example, a DVD player) the receiver
automatically changes to the digital input
setting and DIGITAL shows in the display.
48
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
07
Coaxial digital 1:
• Default settings: DVD
Manually calibrating your
listening area (MCACC)
•
Use ꢀ or ꢁ to assign the coaxial
You can use the Multi-Channel Acoustic Cali-
bration (MCACC) system to fine tune your
speaker levels and channel delay. These are
calibrated according to the distance from
your left front speaker to the listening posi-
tion. You will hear a series of test tones that
will allow you to set the speaker levels and
channel delay to your liking. The advantage of
doing this is that you can achieve an overall
balance defined by the front speakers (the
main speakers for home theater).
digital 1 input (DVD, TV, CD, CDR, VCR or
OFF).
Coaxial digital 2:
• Default setting: CD
•
Use ꢀ or ꢁ to assign the coaxial
digital 2 input (DVD, TV, CD, CDR, VCR or
OFF).
Optical digital 1:
• Default settings: TV
•
Use ꢀor ꢁto assign the optical digital
• You must complete the Speaker setting on
page 44 before using the MCACC setup.
1 input (DVD, TV, CD, CDR, VCR or OFF).
Optical digital 2
(VSX-D812/D912 only)
• Default setting: CDR
•
Use ꢀor ꢁto assign the optical digital
RECEIVER
2 input (DVD, TV, CD, CDR, VCR or OFF).
• You can’t assign two inputs to the same
function. For example, assigning input 1
to the default setting of input 2
ENTER
automatically switches input 2 to OFF.
MCACC
SETUP
• These test tones can be loud, so take care
that there is no one in the room who will
be startled by the noise.
49
En
Download from Www.Somanuals.com. All Manuals Search And Download.
07
Setting up
1
2
Press RECEIVER.
The test tone for channel delay is output in the
same order as step 5:
Press MCACC SETUP.
The MCACC system uses the left front
speaker as a reference point to calibrate the
speaker level and channel delay.
R
C
LS
The front left speaker tone and the target
speaker (the one that you’re trying to adjust)
tone will sound in turns, so you can judge
which needs to be louder.
RS
SW
SB
After you have completed all the channels in
your speaker setup, the volume level returns
to normal and COMPLETE, then RESUME
shows in the display.
3
Use ꢀ and ꢁ to adjust each channel
level in turn, pressing ENTER to go to the
next channel when you’re done.
The test tone is output in the following order
(depending on the speaker setting):
• Using the MCACC system to set up your
speaker system will overwrite any
previous settings you had for the
STANDARD or ADVANCED SURROUND
modes.
R
C
LS
RS
SW
SB
4
Specify the distance from the front left
speaker to your listening position using ꢀ
and ꢁ then press ENTER.
5
Use ꢀ and ꢁ to adjust the delay for
each channel in turn, pressing ENTER to go
to the next channel when you’re done.
Listen to the reference channel and use it to
measure the target channel. Stand facing the
two speakers with your arms outstretched
pointing at each speaker. Try to make the two
tones sound as if they are arriving simulta-
neously at a position slightly in front of you
and between your arm span.
50
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up
07
3
Press MASTER VOLUME +/– to adjust
Setting separate channel
the volume to an appropriate level.
levels for listening modes
4
Use LEVEL +/– to adjust the speaker
• Default setting: 0 dB
levels in turn.
In addition to the MCACC setup, you can also
set relative channel levels from the listening
position using the method below. Using CH
SELECT (see tip below), it is also possible to
set separate channel levels for each of the
listening modes.
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level
range is 10 dB.
5
When you’re done, press TEST TONE to
turn off the test tone.
The receiver returns to the Standard mode.
ADVANCED
STANDARD SURROUND
• The speaker volume can be adjusted
without outputting the test tone by
pressing CH SELECT and then using
LEVEL +/–. However, you can only adjust
the level of the speakers currently active
in the mode you’re listening to. You can
set separate levels for the STANDARD,
STEREO and DVD 5.1 ch/DVD 7.1 ch
modes, as well as for each ADVANCED
SURROUND mode.
TEST
TONE
CH
SELECT
LEVEL
MASTER
VOLUME
1
Press STANDARD or ADVANCED
SURROUND.
• Test tone is only output in STANDARD or
ADVANCED SURROUND mode.
2
Press TEST TONE to output the test
tone.
• Since the subwoofer transmits an ultra-
low frequency its sound may seem quieter
than it actually is.
The test tone is output in the following order
(depending on the speaker setting):
L
C
R
• Using test tones to set up your speaker
system will overwrite any previous
settings you had for the STANDARD or
ADVANCED SURROUND modes.
RS
SW
LS
SB
• If you don’t hear a test tone from one of
your speakers, please refer to Speaker
setting on page 44 and Surround back
speaker setting on page 45 to make sure
you have correctly specified your speaker
setup.
51
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Using the tuner
Chapter 8:
Using the tuner
Automatic tuning
Listening to the radio
To search for stations in the currently
selected band, press and hold TUNE +/–
for about a second. The receiver will start
searching for the next station, stopping
when it has found one. Repeat to search
for other stations.
The following steps show you how to tune in
to FM and AM radio broadcasts using the
automatic (search) and manual (step) tuning
functions. If you already know the frequency
of the station you want, see Tuning directly to
a station below. Once you are tuned to a
station you can memorize the frequency for
recall later—see Saving station presets on
page 53 for more on how to do this.
Manual tuning
To change the frequency one step at a
time, press TUNE +/–.
High speed tuning
Press and hold TUNE +/– for high speed
tuning. Release the button at the
frequency you want.
TUNER
Improving FM stereo sound
If the TUNED or STEREO indicators don't light
when tuning to an FM station because the
signal is weak, press the MPX button to
switch the receiver into mono reception
mode. This should improve the sound quality
and allow you to enjoy the broadcast.
MASTER
VOLUME
TUNE
TUNE
BAND
RF ATT
Using the RF attenuator
MPX
If the radio signal is too strong and/or the
sound is distorting, press the RF ATT button
to attenuate (lower) the radio signal input and
reduce the distortion (for FM stations only).
1
Press the TUNER button to select the
tuner.
2
Use the BAND button to change the
Tuning directly to a station
Sometimes, you'll already know the frequency
of the station you want to listen to. In this
case, you can simply enter the frequency
directly using the number buttons on the
remote control.
band (FM or AM), if necessary.
Each press switches the band between FM
and AM.
3
Tune to a station.
There are three ways to do this:
52
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the tuner
08
1
Press the TUNER button to select the
tuner.
MULTI JOG
ENTER
2
Use the BAND button to change the
band (FM or AM), if necessary.
Each press switches the band between FM
and AM.
MASTER VOLUME
/
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
SB CH
MODE
QUICK
SETUP
TONE
DOWN
UP
MULTI JOG
VIDEO INPUT
SETUP
MIC
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
3
Press D.ACCESS (Direct Access).
4
Use the number buttons to enter the
frequency of the radio station.
For example, to tune to 106.00 (FM), press 1,
0, 6, 0, 0.
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGH
LOUDNES
TUNING
STATION
PHONES SURR.
LISTENING MODE
STEREO TUNED
A
SP
PTY
SEARCH
EON
MODE
TUNER EDIT
CLASS
BAND
MPX
MULTI JOG
SETUP
MIC
DIGITAL IN
FM
106.00
If you make a mistake halfway through, press
D.ACCESS twice to cancel the frequency and
start over.
Saving station presets
If you often listen to a particular radio station,
it's convenient to have the receiver store the
frequency for easy recall whenever you want
to listen to that station. This saves the effort of
manually tuning in each time. This unit can
memorize up to 30 stations, stored in three
banks, or classes, (A, B and C) of 10 stations
each. When saving an FM frequency, the
MPX setting (see page 52) is also stored. Use
the front panel controls to store station
presets.
TUNER
MASTER
VOLUME
TUNE
INPUT ATT
T.EDIT
ST
ST
ENTER
TUNE
BAND
MPX
CLASS
1
Tune to a station you want to
memorize.
See Listening to the radio on page 52 for more
on this.
53
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Using the tuner
2
Press T.EDIT (TUNER EDIT).
The display shows ST. MEMORY, then a
blinking memory class.
• To erase a station name, simply repeat
steps 1-3 and input four spaces instead of
a name.
STEREO TUNED
A
SP
• Once you have named a station preset,
you can press DISPLAY when listening to
a station to switch the display between
the name and the frequency.
A -
99.50
3
Press CLASS to select one of the three
classes then press ST +/– (STATION +/–) to
select the station preset you want.
You can also use the the MULTI JOG dial
(front panel) to select a station preset.
4
Press ENTER.
After pressing ENTER, the preset class and
number stop blinking and the receiver stores
the station.
Naming station presets
For easier identification, you can name your
station presets.
1
Choose the station preset you want to
name.
See Listening to station presets below for how
to do this.
2
Press T.EDIT (TUNER EDIT).
The display shows ST. NAME, then a blinking
cursor at the first character position.
3
Input the name you want.
Names can be up to four characters long.
• Use the MULTI JOG dial (front panel) or
the ST +/– buttons (remote) to select
characters.
• Press ENTER to confirm a character. If no
character is input, a space is input.
• The name is stored when ENTER is
pressed after choosing the fourth
character.
54
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the tuner
08
Radio Text (RT) is messages sent by the radio
station. These can be anything the
broadcaster chooses—a talk radio station
might give out it telephone number as RT, for
example.
Listening to station presets
You will need to have some presets stored to
do this. See Saving station presets on page 53
if you haven’t done this already.
1
Press TUNER to select the tuner.
Program Service Name (PS) is the name of
the radio station.
2
Press CLASS to select the class in which
the station is stored.
Press repeatedly to cycle through classes A,
B and C.
Program Type (PTY) indicates the kind of
program currently being broadcast.
The receiver can search for and display the
following program types:
3
Press ST +/– (STATION +/–) to select
the station preset you want.
NEWS – News
AFFAIRS – Current affairs
INFO – General information
SPORT – Sport
EDUCATE – Educational material
DRAMA – Radio plays or serials
• If the receiver is left disconnected from
the AC power outlet for an extended
period, the station memories will be lost
and will have to be reprogrammed.
CULTURE – National or regional culture,
theatre, etc.
SCIENCE – Science and technology
An introduction to RDS
VARIED – Usually talk-based material,
Radio Data System, or RDS as it’s usually
known, is a system used by FM radio stations
to provide listeners with various kinds of
information—the name of the station and the
kind of show they’re broadcasting, for
example. This information shows up as text
on the display, and you can switch between
the kind of information shown. Although you
don’t get RDS information from all FM radio
stations, you do with most.
such as quiz shows or interviews.
POP M – Pop music
ROCK M – Rock music
EASY M – “Middle of the road” music also
called soft rock
LIGHT M – ‘Light’ classical music
CLASSICS – ‘Serious’ classical music
OTHER M – Other music not fitting any of
the above categories
Probably the best feature of RDS is that you
can search automatically by type of program.
So, if you felt like listening to jazz, you could
search for a station that’s broadcasting a
show with the program type, JAZZ. There are
around 30 such program types, including
various genres of music, news, sport, talk
shows, financial information, and so on.
WEATHER – Weather reports
FINANCE – Stock market reports,
commerce, trading, etc.
CHILDREN – Programs for children
SOCIAL – Social affairs
RELIGION – Programs concerning
religion
The receiver lets you display three different
kinds of RDS information: Radio Text,
Program Service Name, and Program Type.
55
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Using the tuner
PHONE IN – Public expressing their views
by phone
• If you see NO RADIO TEXT DATA in the
RT display, it means no RT data is
transmitted from the broadcast station. If
you have entered a name for the station, it
is broadcast instead of RT data. If you
haven’t, the display will automatically
switch to the PS data display. If no PS
data is transmitted from the station, the
frequency will be displayed.
TRAVEL – Holiday-type travel rather than
traffic announcements
LEISURE – Leisure interests and hobbies
JAZZ – Jazz
COUNTRY – Country music
NATION M – Popular music in a
language other than English
• In the PTY display, there are cases where
NO DATA is shown. If this happens, the
PS display is shown after a few seconds.
OLDIES – Popular music from the ’50s
and ’60s
• This unit converts lower case characters
transmitted by broadcast stations to
upper case characters.
FOLK M – Folk music
DOCUMENT – Documentaries
In addition, there are two other program
types, ALARM, and NO DATA. ALARM is
used for emergency announcements. You
can’t search for this, but the tuner will switch
automatically to this RDS broadcast signal.
NO DATA appears when a program type
cannot be found.
• If reception conditions are strong but the
RDS data is displayed incorrectly, press
RF ATT.
Searching for RDS programs
One of the most useful features of RDS is the
ability to search for a particular kind of radio
program. You can search for any of the
program types listed on the previous page.
Displaying RDS information
Use the DISPLAY button to display the
different types of RDS information available
(RT, PS and PTY).
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
TUNING
STATION
PHONES SURR.
LISTENING MODE
PTY
SEARCH
EON
MODE
TUNER EDIT
CLASS
BAND
MPX
•
Press DISPLAY to select the RDS
MULTI JOG
SETUP
MIC
DIGITAL IN
information display.
Each press changes the display as follows:
• RT – Radio Text display
• PS – Program Service display
• PTY – Program Type display
• Current tuner frequency
MULTI JOG
ENTER
MASTER VOLUME
/
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
SB CH
MODE
QUICK
SETUP
TONE
DOWN
UP
MULTI JOG
VIDEO INPUT
• If any noise is picked up while displaying
the RT scroll, some characters may be
displayed incorrectly.
SETUP
MIC
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
56
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the tuner
08
1
Press the BAND button to select the
Using EON
FM band.
RDS is only possible in the FM band.
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
TUNING
STATION
PHONES SURR.
LISTENING MODE
2
Press the PTY SEARCH button.
PTY
SEARCH
EON
MODE
TUNER EDIT
MULTI JOG
CLASS
BAND
MPX
SEARCH shows in the display.
SETUP
MIC
DIGITAL IN
3
Use the MULTI JOG dial to select the
program type you want to hear.
4
Press ENTER to search for the program
1
Press the BAND button to select the
type.
FM band.
EON is only possible in the FM band.
The system starts searching through the
station presets for a match. When it finds one,
the search stops and the station plays for five
seconds.
2
Press EON MODE to select one of the
possible modes.
Press repeatedly to switch between:
5
If you want to keep listening to the
• TA (Traffic Announcement) – Sets the
tuner to pick up traffic information when it
is broadcast.
station, press ENTER within the 5 seconds.
If you don’t press ENTER, searching resumes.
If NO PTY is displayed it means the tuner
couldn’t find that program type at the time of
the search.
• NEWS – Sets the tuner to pick up news
when it is broadcast.
• OFF – Switches off the EON feature.
When set to TA or NEWS, the EON indicator
in the display lights. The EON indicator blinks
when the receiver switches automatically to
an EON broadcast.
• RDS searches station presets only. If no
stations have been preset, or if the
program type could not be found among
the station presets NO PTY is displayed.
FINISH means the search is complete.
• The EON function does not work when
listening to AM reception.
An introduction to EON
• You can’t search for traffic
announcements and news at the same
time.
When EON (Enhanced Other Network
information) is turned on, the receiver jumps
to an EON-linked broadcast when it begins,
even if a receiver function other than the tuner
is being used. It can’t be used in areas that
EON information isn’t transmitted and when
FM broadcast stations don’t transmit PTY
data. When the broadcast ends, the tuner
returns to the original frequency or function.
• You cannot operate the T.EDIT and
SEARCH buttons while the EON indicator
in the display is lit.
• The indicator lights to inform you that
the currently tuned station carries the
EON data service.
• You can’t change to a different function
(for example, DVD/LD) during an EON
search.
57
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Using the tuner
Clearing all stations from the RDS
and EON searches
The receiver will automatically register an
identifying marker (called a PI code) for any
station you input into the memory classes
which can receive RDS or EON data. If you
want to remove the currently memorized
stations from RDS and EON searches, you
can do it by erasing the PI codes.
1
Press and hold EON MODE for about
two seconds.
ERASE PI is displayed.
2
Press ENTER.
ERASE PI flashes for two seconds to indicate
the PI codes have been erased.
58
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Making recordings
09
Chapter 9:
Making recordings
1
Select the source you want to record.
Making an audio or a video
recording
Use the MULTI CONTROL buttons (or INPUT
SELECT).
You can make an audio or a video recording
from the built-in tuner, or from an audio or
video source connected to the receiver (such
as a CD player or TV).
2
Select the input signal (if necessary).
Press SIGNAL SELECT (front panel) to select
the input signal corresponding to the source
component (see page 36 for more on this).
Keep in mind you can’t make a digital
recording from an analog source or vice-
versa, so make sure the components you are
recording to/from are hooked up in the same
way (see Connecting up on page 16 for more
on connections).
3
Prepare the source you want to record.
Tune to the radio station, load the CD, video,
DVD etc.
4
Prepare the recorder.
Insert a blank tape, MD, video etc. into the
recording device and set the recording levels.
If you want to record a video source, you also
need use the same type of connection for the
source as for the recorder. For example, you
can’t record a component hooked up to S-
video jacks with a recorder hooked up to the
video outputs (see page 20 for more on video
connections).
Refer to the instructions that came with the
recorder if you are unsure how to do this.
Most video recorders set the audio recording
level automatically—check the component’s
instruction manual if you’re unsure.
5
Start recording, then start playback of
the source component.
INPUT SELECT
DVD/LD
TV/SAT
VCR/DVR
TUNER
VIDEO
AUX
MULTI CONTROL
CD-R/
TAPE/MD
CD
DVD/LD
CD
TV/SAT
VCR/DVR
TV CONT
STATION
STANDBY
CD-R/TAPE
TUNER
STANDBY/ON
• The receiver's volume, balance, tone
(bass, treble, loudness), and surround
effects have no effect on the recorded
signal.
TUNER EDIT
CLASS
MULTI JOG
PHONES
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
SB CH
MODE
QUICK
SETUP
TONE
MULTI JOG
PHONES SURR.
LISTENING MODE
VIDEO INPUT
PTY
SEARCH
EON
MODE
SETUP
MIC
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
59
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Controlling the rest of your system
CChaoptnert1r0:olling the rest of your
system
Setting the remote to control
other components
Selecting preset codes
directly
There are several ways to set your remote to
control the other components in your system.
The easiest way to do this is to assign the
component’s manufacturer preset code
(starting on page 67) to one of the MULTI
CONTROL buttons on the remote control.
MULTI CONTROL
DVD/LD
CD
TV/SAT
VCR/DVR
TV CONT
RECEIVER
CD-R/TAPE
TUNER
The buttons can be set to control the following
components:
MASTER
VOLUME
Button
Controllable Components
TUNE
DVD/LD:
TV/SAT:
DVD or LD player
TV or Satellite tuner
ST
ST
ENTER
VCR/DVR: VCR or Digital Video Recorder
CD:
CD player
TUNE
CD-R/TAPE: CD Recorder, Tape deck
or MD player
TV CONT:
TUNER:
TV or Cable TV tuner
FM/AM tuner
If you can’t find a preset code that matches
the component you want to control, you can
still teach the remote individual commands
from another remote control (page 61).
1
While pressing the RECEIVER button,
press and hold the 1 button.
The LED blinks.
• The remote control will exit an operation
after 1 minute of inactivity.
2
Press the MULTI CONTROL button for
the component you want to control.
The LED lights.
60
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the rest of your system
10
3
Use the number buttons to enter the
nent (for example ꢁ, ꢂ, or other operation
preset code.
You can find the preset codes on page 67
(VSX-D712) and page 68 (VSX-D812/912).
buttons). This can also be used to program
additional operations (buttons not covered in
the presets) after assigning a preset code.
The LED blinks again after you enter the code.
1
While pressing the RECEIVER button,
If the correct code has been input the power
of the component being input will turn on or
off.
press and hold the 2 button.
The LED blinks.
2
Press the MULTI CONTROL button for
The power of the component being input will
only turn on or off if that component is able to
be turned on directly by remote control.
the component you want to control.
The LED lights.
• To exit or cancel press RECEIVER.
• You can only input a code for the compo-
nent type written on each MULTI
CONTROL button (except RECEIVER and
TUNER).
3
Point the two remote controls
towards each other about 2–5 cm apart
then press the button that will be doing
the learning on this receiver’s remote
control.
• Even if you don’t input a preset code for
the TV (TV/SAT MULTI CONTROL button)
you will be able to control your TV using
the dedicated TV CONTROL on the
remote if you have assigned it to the TV
CONT button.
The LED blinks rapidly.
2 – 5 cm
4
Press the corresponding button on the
• You may not be able to use a particular
code even if it is listed on page 67.
other remote control that is sending
(teaching) the signal to this receiver’s
remote control.
If the operation has been learned success-
fully, the LED on this receiver’s remote will
blink once then light steadily.
• The remote control buttons will not be
able operate other equipment unless
preset with the method above.
4
Repeat steps 2 through 3 to try a
different code, or to enter a code for
another component you want to control.
If for some reason the operation hasn’t been
learned the LED will blink for three seconds
and then light steadily. If this happens, keep
pressing the (teaching) button as you vary the
distance between the two remotes, until you
see the the LED light steadily.
5
When you’re done, press RECEIVER.
Programming signals from
other remote controls
If there is not enough memory for this button
to be learned by the remote, the LED will blink
twice and the operation will be canceled.
VSX-D812/D912 only
If the preset code for your component is not
available, or the available preset codes do not
operate correctly, you can program signals
from the remote control of another compo-
5
To program additional signals for the
current component repeat steps 3 and 4.
To program operations for another compo-
nent exit and repeat steps 1 through 5.
61
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Controlling the rest of your system
6
When you’re done, press RECEIVER to
Direct function
store the operation(s).
• Default setting: ON
You can use the direct function feature to
control one component using the remote
control while at the same time, using your
receiver to playback a different component.
This could let you, for example, use the
remote control to set up and listen to a CD on
the receiver and then use the remote control
to rewind a tape in your VCR while you
continue to listen to your CD player.
• Some commands from other remote
controls cannot be learned, but in most
cases the remotes just need to be moved
closer together or farther apart.
• Certain buttons represent operations that
cannot be learned from other remote
controls. These include: RECEIVERꢀ ,the
MULTI CONTROL buttons, RECEIVER
CONTROL and MASTER VOLUME
buttons.
When direct function is on, any component
you select (using the MULTI CONTROL
buttons ) will be selected by both the receiver
and the remote control. When you turn direct
function off, you can operate the remote
control without affecting the receiver.
Erasing all of your
1
While pressing the RECEIVER button,
programmed settings
press and hold the 4 button.
The LED blinks.
VSX-D812/D912 only
This erases all of the buttons you have
programmed (in Programming signals from
other remote controls, above) and restores the
button to the factory default.
2
Press the MULTI CONTROL button for
the component you want to control.
The LED lights.
3
Use the number buttons to enter
•
While pressing the RECEIVER button,
either 1 (direct on) or 2 (direct off).
The LED blinks again.
press and hold the 9 button for three
seconds.
The LED blinks steadily for three seconds and
then goes off.
4
Repeat steps 2 through 3 for the other
components you want to control.
5
When you’re done, press RECEIVER.
Clearing all the remote
control settings
You can clear all presets and restore the
factory default settings.
• You can’t use direct function for TUNER.
•
While pressing the RECEIVER button,
press and hold the 0 button for three
seconds.
The LED blinks three times indicating the
settings have been restored to the factory
presets.
62
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the rest of your system
10
Controls for TVs
This remote control can control components after entering the proper codes or teaching the
receiver the commands (see Setting the remote to control other components on page 60 for more
on this). Use the MULTI CONTROL buttons to select the component.
Button(s) Function
Components
TVꢀ
Switches the DTV on or off.
DTV
Switches the TV or CATV between standby and on.
Switches the TV input. (Not possible with all models.)
Cable TV/Satellite TV/TV
TV
INPUT
SELECT
CHANNEL Selects channels.
+/–
Cable TV/Satellite TV/TV/
DTV
VOLUME
+/–
Adjust the TV volume.
Cable TV/Satellite TV/TV/
DTV
TOP MENU Use as the TEXT ON button.
TV
MENU
Select different menus from the DTV functions.
DTV
Select the menu screen.
Cable TV/Satellite TV/TV
AUDIO
GUIDE
Use as the AUDIO button.
Cable TV/Satellite TV/TV/
DTV
Use as the GUIDE button for navigating.
Use as the TEXT OFF button.
Cable TV/Satellite TV/DTV
TV
ꢃ
ꢄ
Use to choose the BLUE commands on a DTV menu.
B/RED
DTV
Satellite TV/TV
Use to choose the GREEN commands on a DTV menu. DTV
C/GREEN
Satellite TV/TV
ꢂ
Use to choose the RED commands on a DTV menu.
D/YELLOW
DTV
Satellite TV/TV
ꢅ
ꢆ
Use to choose the YELLOW commands on a DTV menu. DTV
E/CYAN
Satellite TV/TV
Press to get information on DTV programs.
A
DTV
Satellite TV/TV
63
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Controlling the rest of your system
Button(s) Function
Components
DTV
ꢁ
Switches DTV on or off.
ꢇ
Use to select closed captioning with DTV.
Use to select a specific TV channel.
DTV
Number
Buttons
Cable TV/Satellite TV/TV/
DTV
+10 button Use to add a decimal point when selecting a specific TV DTV
channel.
ENTER/
DISC
Use to enter a channel.
Cable TV/Satellite TV/TV/
DTV
ꢃꢄꢀꢁ & Select or adjust and navigate items on the menu screen. DTV
ENTER
ENTER brings up the DTV menus.
Press to select or adjust and navigate items on the menu Cable TV/Satellite TV/TV/
screen.
DTV
• The four TV CONTROL buttons on the remote control are dedicated to control the TV
assigned to the TV CONT button. Thus if you only have one TV to hook up to this system
assign it to the TV CONT MULTI CONTROL button. If you have two TVs, assign the main TV
to the TV CONT button.
Controls for other components
This remote control can control these components after entering the proper codes or teaching
the receiver the commands (see Setting the remote to control other components on page 60 for
more on this). Use the MULTI CONTROL buttons to select the component.
Button (s) Function
Components
SOURCEꢀ Press to switch the component between standby and on. CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
ꢃ
ꢅ
Press to return to the start of the current track.
Repeated presses skips to the start of previous tracks.
CD/MD/CD-R/DVD/LD
player
Play the reverse side of the tape on a reversible deck.
Press to advance to the start of the next track.
Cassette deck
CD/MD/CD-R/DVD/LD
Repeated presses skips to the start of following tracks. player
Play the forward side of the tape on a reversible deck.
Cassette deck
64
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the rest of your system
10
Button (s) Function
Components
ꢀ
Pause playback or recording.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
ꢁ
Start playback.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
ꢂ
ꢃ
ꢄ
Hold down for fast forward playback.
Hold down for fast reverse playback.
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
CD/MD/CD-R/VCR/DVD/LD/
DVR player/Cassette deck
Stops playback (on some models, pressing this when the CD/MD/CD-R/VCR/DVD/LD/
disc is already stopped will cause the disc tray to open). DVR player/Cassette deck
Number
buttons
Directly access tracks on a program source.
CD/MD/CD-R/VCR/LD
player
Use the number buttons to navigate the on-screen
display.
DVD/DVR player
+10 button Selects tracks higher than 10. (For example, press +10
CD/MD/CD-R/VCR/LD
player
then 3 to select track 13.)
ENTER/
DISC
Changes the search mode.
DVD
Chooses the disc.
Multiple CD player
VCR
Use as the ENTER button.
Displays the setup screen for DVR players.
Changes sides of the LD.
DVR player
LD player
MENU
Displays menus concerning the current DVD or DVR you DVD/DVR player
are using.
ꢀ
Pauses the tape.
Cassette deck
Cassette deck
Cassette deck
Cassette deck
DVD/DVR Player
ꢁ
Stops the tape.
ENTER
ꢂ/ꢃ
Starts playback.
Fast rewinds/fast forwards the tape.
ꢂꢃꢀꢁ & Navigates DVD menu/options.
ENTER
CHANNEL Selects channels.
VCR/DVR Player
+/–
65
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Controlling the rest of your system
Button (s) Function
Components
TOPMENU Displays the disc ‘top’ menu of a DVD.
DVD/DVR Player
DVD/DVR Player
DVD/DVR Player
AUDIO
GUIDE
Changes the audio language or channel.
Displays/changes the subtitles on multilingual DVDs.
66
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the rest of your system
10
Preset Code List (VSX-D712 only)
You should have no problem controlling a component if you find the manufacturer in this list,
but please note that there are cases where codes for the manufacturer in the list will not work
for the model that you are using. There are also cases where only certain functions may be
controllable after assigning the proper preset code.
• The TV CONT button will only accept preset codes for TV, STB and DTV.
SALORA 643
SAMSUNG 644, 646
BUSH 647
FUJITSU 648
SEI 649
FINLUX 655
SONY 604
PANASONIC 608, 622
TOSHIBA 605
SHARP 602
HITACHI 606, 633, 634,
654
ALBA 447, 452
BUSH 448
YAMAHA 811, 822
PIONEER 800, 825
DVD
Manufacturer Code
TOSHIBA 001
SONY 002
PANASONIC 003
JVC 004
SAMSUNG 005
SHARP 006
AKAI 007
RCA 009, 011
DENON 010
HITACHI 012(DVD/CD/
CD-R)
PHILIPS 013
ZENITH 014
THOMSON 449
BAIRD 450
TELEFUNKEN 451
GRUNDIG 453, 454, 455
MAGNAVOX 414
PANASONIC 408 , 432 ,
TOSHIBA 405
JVC 407, 428
HITACHI 406
SONY 416, 417, 457, 458,
459(Digital Video)
MITSUBISHI 409, 424
SANYO 444
CD
Manufacturer Code
GOLDSTAR 330
PANASONIC 304
BUSH 332
HITACHI 334
AKAI 335
ASUKA 337
FISHER 340
LUXMAN 341
SHARP 343
ROADSTAR 344
DENON 309
SANYO 645,
MITSUBISHI 609
GOLDSTAR 650
JVC 613
FUNAI 640
GRANDIENTE 657
PIONEER 600, 651, 231
SHARP 402
THOMSON 015
SONY 016 (video game)
PIONEER 000, 008
GOLDSTAR 411
GRADIENTE 441
PIONEER 400, 443
JVC 331
KENWOOD 310, 311
ONKYO 342
PHILIPS 322, 336
RCA 319
SONY 316, 329
TECHNICS 333
YAMAHA 338, 339
PIONEER 300
LD
STB (SATELLITE/CATV) DVD Recorder
Manufacturer Code
SONY 101, 102
HITACHI 109
DENON 110
PHILIPS 104
Manufacturer Code
JERROLD 716
Manufacturer Code
PIONEER 456
S.ATLANTA 706, 708
ZENITH 717
PIONEER 700
TAPE
Manufacturer Code
PANASONIC 803
LUXMAN 815
PIONEER 100,111(DVD/
LD)
MD
On digital STB
Manufacturer Code
SONY 901
KENWOOD 903
SHARP 902
TEAC 904
ONKYO 905
DENON 906
PIONEER 900, 907(DAT)
ManufacturerCode
NAKAMICHI 816
SHERWOOD 818
TAND BERG 820
PHILIPS 821
SANSUI 824
THOSHIBA 826, 828
AKAI 829
TV
PIONEER 200, 204
Manufacturer Code
RCA 618
TUNER
Manufacturer Code
PIONEER 500
PHILIPS 607,656
GRUNDIG 631, 653
NOKIA 632, 652
FISHER 635, 638
THOMSON 636
TELEFUNKEN 637
ALBA 639
DENON 810, 827
FISHER 813
JVC 802
KENWOOD 804, 807
ONKYO 817, 819
SONY 814, 823
VCR
CD-R
Manufacturer Code
PHILIPS 346
Manufacturer Code
AKAI 442
MATSU 445
AIWA 446
TANDY 641
ITT 642
PIONEER 345
67
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Controlling the rest of your system
Preset Code List (VSX-D812/D912)
You should have no problem controlling a component if you find the manufacturer in this list,
but please note that there are cases where codes for the manufacturer in the list will not work
for the model that you are using. There are also cases where only certain functions may be
controllable after assigning the proper preset code.
• The TV CONT button will only accept preset codes for TV, STB and DTV.
CLATRONIC 5025
CRAIG 5026, 5027, 5028,
5029
CROSLEX 5030
CURTIS MATHIS
MIVAR 5100
NEC 5101, 5102
NOKIA OCEANIC 5103
NORDMENDE 5104,5105
OKANO 5106
ONWA 5107
PANASONIC 5108, 5109,
5110, 5111
PHILCO 5112, 5113, 5114
PHONOLA 5115
PORTLAND 5116, 5117
PROSCAN 5118
QUASAR 5119, 5120
RADIO 5121, 5122
RADIOSHACK 5123,5124,
5125
RADIOLA 5126
RCA/PROSCAN 5127,
5128, 5129
SABA 5130
SAMSUNG 5131, 5132
SANYO 5133, 5134, 5135
DVD
VCR
Manufacturer Code
TOSHIBA 1010
SONY 1009
SAMSUNG 1008
JVC 1005
RCA 1007
DENON 1004
PHILIPS 1006
Manufacturer Code
PIONEER 3001, 3002,
3003, 3004, 3005
ADMIRAL 3006
AIWA 3007, 3008, 3009
AKAI 3010, 3011
ALBA 3012
AUDIO DYNAMIC 3013,
3014
BELL&HOWELL 3015
BLAUPUNKT 3016, 3017
BROCSONIC 3018, 3019
BUSH 3020
CANON 3021
CGM 3022, 3023
CITIZEN 3024
CLATRONIC 3025
CRAIG 3026
CURTIS MATHIS 3027,
3028, 3029
DAEWOO3030, 3031,
3032
DBX 3033, 3034
DIMENSIA 3035
EMERSON 3036,
3037,3038, 3039, 3040,
3041
FERGUSON 3042
FISHER 3043, 3044, 3045,
3046
FUNAI 3047, 3048
GE 3049, 3050, 3051
GOLDSTAR 3052
GOODMANS 3053, 3054
GRUNDIG 3055
HITACHI 3056, 3057, 3058,
3059, 3060
5031,5032, 5033
DAEWOO 5034, 5035,
5036, 5037, 5038, 5039
DAYTRON 5040
DUAL 5041
EMERSON 5042,
5043,5044,5045, 5046,
5047, 5048
FERGUSON 5049, 5050
FIRST 5051
FISHER 5052
TOSHIBA 1010
YAMAHA 1011, 1012
PIONEER 1001, 1002 , 1003
LD
Manufacturer Code
SONY 2008
FUJITSU 5053
PHILIPS 2006, 2007
PANASONIC 2005
KENWOOD 2004
DENON 2003
YAMAHA 2009
PIONEER 2001, 2002
FUNAI 5054, 5055, 5056
GE 5057, 5058, 5059, 5060
GOLDSTAR 5061, 5062,
5063, 5064
GOODMANS 5065, 5066
HITACHI 5067, 5068, 5069, SCHNEIDER 5136
5070, 5071
ICE 5072
IRRADIO 5073
ITT/NOKIA 5074,5075
JC PENNY 5076, 5077,
5078, 5079
JVC 5080, 5081
KENDO 5082
KTV 5083, 5084
LOEWE 5085
LXI 5086, 5087, 5088, 5089,
5090
MAGNAVOX 5091
MARK 5092
MATSUI 5093, 5094
MATSUSHITA 5095, 5096
MEDION 5097
SCOTT 5137, 5138
SHARP 5139, 5140
SIEMENS 5141
SIGNATURE 5142, 5143
SONY 5144, 5145
SYLVANIA 5146, 5147
SYMPHONIC 5148
TATUNG 5149
TV
Manufacturer Code
PIONEER 5001,5002, 5003,
5004, 5005, 5006, 5007,
5008, 5009, 5010
ADMIRAL 5011, 5012.
5013
AIWA 5014, 5015
AKAI 5016
ALBA 5017
AOC 5018
BESTAR 5019
BLAUPUNKT 5020
BLUE SKY 5021
BRANDT 5022
BROCSONIC 5023
BUSH 5024
TELEFUNKEN 5150, 5151
THORN 5152
TOSHIBA 5153, 5154
UNIVERSUM 5155
VIDECH 5156, 5157
W. WHOUSE 5158
WARDS 5159, 5160, 5161
WATSON 5162
INSTANT REPLAY 3061,
3062
ITT/NOKIA 3063
ZENITH 5163, 5164
MITSUBISHI 5098, 5099
68
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the rest of your system
10
JC PENNY 3064, 3065,
3066, 3067, 3068, 3069
JVC 3070, 3071, 3072
KENDO 3073
KENWOOD 3074, 3075,
3076
LOEWE 3077, 3078
LUXOR 3079
LXI 3080, 3081, 3082,
3083, 3084, 3085 , 3086
MARANTZ 3087, 3088
MARTA 3089
SCOTT 3141, 3142, 3143,
3144, 3145, 3146, 3147
SEG 3148
HNS/HUGHES 6014
HITACHI 6015
ITT/NOKIA 6016
JERROLD 6017, 6018,
6019, 6020, 6021
NEC 6022, 6023
OAK 6024, 6025, 6026
PANASONIC 6027, 6028,
6029
PHILIPS 6030, 6031
PRIMESTAR 6048
RADIO SHACK 6032
RCA 6033
SAMSUNG 6034, 6035
SCIENTIFIC ATLANTA
6036 , 6037, 6038
SIEMENS 6039, 6040
SONY 6041
TOSHIBA 6042, 6043
TOCOM 6044
TECHNICS 7034, 7035
YAMAHA 7036, 7037,
7038, 7039
DENON 7040, 7041
JVC 7042
KENWOOD 7043
PHILIPS 7044
SONY 7045
SELECO 3149
SHARP 3150, 3151, 3152
SIEMENS 3153, 3154, 3155
SIGNATURE 3156, 3157
SONY 3158, 3159, 3160,
3161, 3162, 3163
SYLVANIA 3164, 3165,
3166, 3167
SYMPHONIC 3168
TANDBERG 3169
TASHIRO 3170
TATUNG 3171, 3172
TEAC 3173, 3174, 3175
TECHNICS 3176, 3177
TELEFUNKEN 3178, 3179
THORN 3180, 3181
TOSHIBA 3182, 3183, 3184
UNIVERSUM 3185, 3186,
3187
W. WHOUSE 3188
WARDS 3189, 3190, 3191,
3192, 3193
YAMAHA 3194, 3195,
3196
DVR
Manufacturer Code
PIONEER 4001
MATSUI 3090
MEMOREX 3091, 3092
MINOLTA 3093, 3094
MITSUBISHI 3095, 3096,
3097,3098, 3099
MULTITECH 3100, 3101,
3102
MD
Manufacturer Code
PIONEER 8001, 8002, 8003
DENON 8004
JVC 8005
KENWOOD 8006
SONY 8007
NEC 3103
NOKIA OCEANIC 3104
NOKIA 3105, 3106
NORDMENDE 3107
OKANO 3108
OLYMPIC 3109, 3110
ORION 3111
PANASONIC 3112, 3113,
3114, 3115, 3116, 3117
PENTAX 3118, 3119
PHILCO 3120, 3121
PHILIPS 3122
ZENITH 6045, 6046
YAMAHA 8008, 8009
CD/CD-R
TAPE
Manufacturer Code
PIONEER 7001, 7002
DENON 7003, 7004, 7005
FISHER 7006, 7007
JVC 7008, 7009, 7010,
7011
KENWOOD 7012, 7013,
7014, 7015, 7016
MAGNAVOX 7017, 7018
MARANTZ 7019
ONKYO 7020, 7021
PANASONIC 7022, 7023
PHILIPS 7024, 7025
RCA 7026, 7027
SANYO 7028
SHARP 7029
Manufacturer Code
PIONEER 9001, 9002
DENON 9003, 9004
FISHER 9005, 9006
JVC 9007, 9008
ZENITH 3197
STB
KENWOOD 9009, 9010,
9011
Manufacturer Code
PIONEER 6001, 6002,
6003, 6004, 6005, 6006
BELL 6049
BLAUPUNKT 6007
ECHOSTAR 6047
GENERAL INSTRUMENT
6008
PHONOLA 3123
NAKAMICHI 9012
ONKYO 9013, 9014, 9015
PHILIPS 9016, 9017
SONY 9018, 9019
TEAC 9020, 9021
TECHNICS 9022
QUASAR 3124, 3125
RCA/PROSCAN 3126
REALISTIC 3127, 3128,
3129, 3130, 3131, 3132
SABA 3133
SAMSUNG 3134, 3135
SANSUI 3136
YAMAHA 9023, 9024,
9025 , 9026
GOLDSTAR 6009
GRUNDIG 6010, 6011
HAMLIN 6012, 6013
SANYO 3137, 3138
SCHNEIDER 3139, 3140
SONY 7030
TEAC 7031, 7032, 7033
69
En
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Additional information
Chapter 11:
Additional information
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie
in another component. Investigate the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest
Pioneer authorized service center or your dealer to carry out repair work.
Problem
The power does not turn on. • Connect the power plug to the wall outlet.
• Disconnect the power plug from the outlet, and insert again.
Remedy
• Make sure there are no loose strands of speaker wire touching the
rear panel. This could cause the receiver to shut off automatically.
• If the STANDBY indicator blinks and the power shuts off
automatically, take the unit to your nearest Pioneer authorized
service center or your dealer for servicing.
No sound is output when a
function is selected.
• Make sure the component is connected correctly (refer to
Connecting up on page 16).
• Press MUTE on the remote control to turn muting off.
• Adjust the MASTER VOLUME.
No image is output when a
function is selected.
• Make sure the component is connected correctly (refer to
Connecting up on page 16).
• Select the correct component (use the MULTI CONTROL buttons).
Considerable noise in radio
broadcasts.
• Tune in the correct frequency.
• Connect the antenna (refer to page 21).
• Route any loose cables away from the antenna terminals and
wires.
• Fully extend the FM wire antenna, position for best reception, and
secure to a wall.
• Connect an outdoor FM antenna (refer to page 21).
• Adjust the direction and position for best reception.
• Connect an additional internal or external AM antenna (refer to
page 21).
• Turn off the equipment causing the noise or move it away from the
receiver.
• Move antennas farther away from equipment causing the noise.
70
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
11
Problem
Remedy
Broadcast stations cannot be • Connect an outdoor antenna (refer to page 21).
selected automatically.
No sound from surround or
center speakers.
• Refer to Speaker setting on page 44 to check the speaker settings.
• Refer to Manually calibrating your listening area (MCACC) on
page 49 (with the VSX-D912, you can do this using the Quick
surround sound setup on page 14) to check the speaker levels.
• Connect the speakers properly (refer to page 22).
No sound from surround
back speakers.
• Refer to Surround back speaker setting on page 45 to check the
surround back speaker settings.
• Refer to Manually calibrating your listening area (MCACC) on
page 49 (with the VSX-D912, you can do this using the Quick
surround sound setup on page 14) to check the speaker levels.
• Refer to Using the Surround Back Channel (SB CH) on page 39 to
make sure the SB CH MODE and the sound mode are set for
surround back sound.
No sound from subwoofer.
• Make sure the subwoofer is switched on.
• If the subwoofer has a volume knob, make sure it’s turned up.
• Switch the Subwoofer setting on page 45 to YES or PLUS.
• Switch the LFE attenuator setting on page 46 to 0 dB or 10 dB.
• The Dolby Digital or DTS source you are listening to does not have
an LFE channel.
Noise during playback of a
cassette deck.
• Move the cassette deck further from your receiver, until the noise
disappears.
Sound is produced from
other components, but not
from LD or DVD player.
• Set the SIGNAL SELECT to AUTO, DIGITAL or ANALOG
according to the type of connections made. (refer to page 36).
• Set the digital input settings correctly (refer to page 48).
• Make digital connections (refer to page 17) and set the SIGNAL
SELECT to DIGITAL (refer to page 36).
• Refer to the instruction manual supplied with the DVD player.
No sound is output or a noise • Set the digital volume level of the player to full, or to the neutral
is output when software with position.
DTS is played back.
When a search is performed • This is not a malfunction, but be sure to turn the volume down to
by a DTS compatible CD
player during playback, noise
is output.
prevent the output of loud noise from your speakers.
71
En
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Additional information
Problem
Remedy
Can’t operate the remote
control.
• Replace the batteries (refer to page 5).
• Operate within 7 m, 30° of the remote sensor on the front panel
(refer to page 6).
• Remove the obstacle or operate from another position.
• Avoid exposing the remote sensor on the front panel to direct light.
The display is dark or off.
• Press FL DIMMER on the remote control repeatedly to return to
the default.
• If the unit does not operate normally due to external effects such as static electricity
disconnect the power plug from the outlet and insert again to return to normal operating
conditions.
Resetting the main unit
Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel
controls to do this.
1
Switch the receiver on.
2
While holding down the TONE button, press and hold the ꢀ STANDBY/ON button
for about three seconds.
3
When you see RESET? appear in the display, press the TONE button.
OK? shows in the display.
4
Press TONE once more to confirm.
OK appears in the display to indicate that the receiver has been reset to the factory default
settings.
72
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
11
Signal-to-Noise Ratio [DIN (Continuous
rated power output/50 mW)]
CD, VCR/DVR, CD-R/TAPE/MD,
Specifications
Amplifier section
DVD/LD, TV/SAT . . . . . . . . . . . . . . . . . . . . . 96 dB
Continuous power output (stereo)
These specifications are applicable when the
power supply is 230 V.
Video Section
Input (Sensitivity/Impedance)
VCR/DVR, DVD/LD, TV/SAT . . . . . . .1 Vp-p/75 Ω
Front . . . . . . . . . . . . . . . . . . . 100 W per channel
(DIN 1kHz, THD 1 %, 8 Ω)
Output (Level/Impedance)
VCR/DVR, MONITOR OUT . . . . . . . .1 Vp-p/75 Ω
Continuous power output (surround)
These specifications are applicable when the
power supply is 230 V.
Frequency response
VCR/DVR, DVD/LD,
TV/SAT ꢀ MONITOR . . . . .5 Hz to 7 MHz dB
Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . 55 dB
Front . . . . . . . . . . . . . . . . . . . 100 W per channel
(1kHz, 1.0 %, 8 Ω)
Center . . . . . . . . . . . . . . . . . . 100 W per channel
(1kHz, 1.0 %, 8 Ω)
Surround . . . . . . . . . . . . . . . 100 W per channel
(1kHz, 1.0 %, 8 Ω)
Surround Back. . . . . . . . . . . 100 W per channel
FM Tuner Section
Frequency Range . . . . . . .87.5 MHz to 108 MHz
Usable Sensitivity . . . . . . . . Mono:13.2 dBf, IHF
(1.3 µV/ 75 Ω)
(VSX-D812/D912 only)
(1kHz, 1.0 %, 8 Ω)
50 dB Quieting Sensitivity . . . . . Mono: 20.2 dB
Stereo: 38.6 dBf
Signal-to-Noise Ratio . .Mono: 73 dB (at 85 dBf)
Stereo: 70 dB (at 85 dBf)
Input (Sensitivity/Impedance)
CD, VCR/DVR, CD-R/TAPE/MD,
DVD/LD, TV/SAT. . . . . . . . . . . . . . 200 mV/47 kΩ
Distortion. . . . . . . . . . . . . . Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity . . . . . . . . . . 60dB
(400 kHz)
Stereo Separation. . . . . . . . . . . . . 40 dB (1 kHz)
Frequency Response . . . . . . . . .30 Hz to 15 kHz
Frequency response
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD,
TV/SAT . . . . . . . . . . . . 5 Hz to 100,000 Hz dB
(
1 dB)
Output (Level/Impedance)
VCR/DVR REC, CD-R/TAPE/
Antenna Input (DIN). . . . . . . . 75 Ω unbalanced
MD REC . . . . . . . . . . . . . . . . . . . . 200 mV/2.2 kΩ
AM Tuner Section
Tone control
Frequency Range . . . . . . . 531 kHz to 1,602 kHz
Sensitivity (IHF, Loop antenna) . . . . . .350 µV/m
Selectivity . . . . . . . . . . . . . . . . . . . . . . . . . . 25 dB
Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . 50 dB
Antenna. . . . . . . . . . . . . . . . . . . . . Loop antenna
Bass . . . . . . . . . . . . . . . . . . . . . . 6 dB (100 Hz)
Treble . . . . . . . . . . . . . . . . . . . . . 6 dB (10 kHz)
Loudness . . . +6.5 dB/+3 dB (100 Hz/10 kHz)
(at volume level -50 dB)
73
En
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Additional information
Miscellaneous
Power Requirements . . .AC 220-230 V, 50/60Hz
Power Consumption
VSX-D712 . . . . . . . . . . . . . . . . . . . . . . . . 250 W
VSX-D812/D912 . . . . . . . . . . . . . . . . . . . 280 W
In standby . . . . . . . . . . . . . . . . . . . . . . . . 0.5 W
Dimensions. . . 420 (W) x 158 (H) x 401 (D) mm
Weight (without package)
VSX-D712 . . . . . . . . . . . . . . . . . . . . . . . . .9.5 kg
VSX-D812/D912 . . . . . . . . . . . . . . . . . . .10.0 kg
Furnished Parts
AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . .1
FM wire antenna. . . . . . . . . . . . . . . . . . . . . . . . .1
Dry cell batteries (AA size IEC R6). . . . . . . . .2
Remote control . . . . . . . . . . . . . . . . . . . . . . . . .1
Microphone (VSX-D912 only) . . . . . . . . . . . . 1
Microphone stand (VSX-D912 only) . . . . . . . 1
These operating instructions. . . . . . . . . . . . . . .1
• Specifications and the design are subject
to possible modifications without notice,
due to improvements.
Cleaning the unit
• Use a polishing cloth or dry cloth to wipe
off dust and dirt.
• When the surface is dirty, wipe with a soft
cloth dipped in some neutral cleanser
diluted five or six times with water, and
wrung out well, and then wipe again with
a dry cloth. Do not use furniture wax or
cleansers.
• Never use thinners, benzine, insecticide
sprays or other chemicals on or near this
unit, since these will corrode the surface.
74
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
11
75
En
Download from Www.Somanuals.com. All Manuals Search And Download.
AVVERTENZA: QUESTO APPARECCCHIO NON E’
IMPERMEABILE. NON SISTEMARE VICINO AD ESSO
NESSUN OGGETTO CONTENENTE ACQUA, COME
VASI, CONTENITORI DI PRODOTTI DI BELLEZZA O
Installazione del ricevitore
VENTILAZIONE: All’installazione dell’unità,
FLACONI DI MEDICINALI.
H001A It
assicuratevi di lasciare uno spazio intorno all’unità per
ottenere una corretta ventilazione della stessa e per
migliorare la dispersione del calore (lasciate uno spazio
minimo di 60 cm in alto, di 10 cm dietro l’unità e di 30 cm ai
lati).
AVVERTENZA: PRIMA DI COLLEGARE L’UNITÀ PER
LA PRIMA VOLTA, LEGGERE LA SEZIONE SEGUENTE
CON ATTENZIONE. IL VOLTAGGIO PER
L’ALIMENTAZIONE È DIVERSO A SECONDO DEI
PAESIE DELLE REGIONI, QUINDI ASSICURATEVI CHE
L’ALIMENTAZIONE ELETTRICA DEL POST DOVE
L’UNITÁ SARÀ UTILIZZA TA POSSIEDE IL VOLTAGGIO
RICHIESTO (E.G., 230 V O 120 V) INDICATO SUL
AVVERTENZA: Feritoie ed aperture nella struttura
sono previste solo per la ventilazione e, in modo da
assicurare il buon funzionamento del prodotto, proteggerlo
dal surriscaldamento, dai rischi d’incendio, le aperture non
devono mai essere ostruite o ricoperte da oggetti come
giornali, tovaglie, tende, ecc… Inoltre, non posizionare
l’apparecchio su tappetti spessi, letti, divani o mobili aventi
una spessa imbottitura.
PANNELLO ANTERIORE.
H041 It
AVVERTENZA: NON SISTEMATE NESSUN
OGGETTO CON FIAMMA VIVA, COME CANDELE
ACCESE, VICINO ALL’APPARECCHIO. SE UN TALE
OGGETTO DOVESSE CADERE ACCIDENTALMENTE
SULL’APPARECCHIO, IL FUOCO POTREBBE
ESPANDERSI SULL’APPRECCHIO CON PERICOLO
D’INCENDIO.
H044 It
Questo prodotto è destinato esclusivamente all’uso
domestico. Eventuali disfunzioni douvute ad usi diversi
(quali uso prolungato a scopi commerciali, in ristoranti, o
uso in auto o su navi) e che richiedano particolari
riparazioni, saranno a carico dell’utente, anche sa nel
corso del periodo di garanzia.
K041 it
Condizioni ambientali di funzionamento
H045It
Umidità e temperatura di funzionamento:
+5ºC – +35ºC (+41ºF – +95ºF); inferiore a 85%RH (feritoie
di raffreddamento non ostruite)
ATTENZIONE:
I TASTI POWER ON/OFF E STANDBY/ON SONO
COLLEGATI AD UN CIRCUITO SECONDARIO E
QUINDI, NELLA POSIZIONE DI ATTESA, NON
Non posizionare nei seguenti luoghi:
•
•
luoghi esposti alla luce diretta del sole o a forti
sorgenti di luce artificiale
luoghi esposti a condizioni di alta umidità o scarsa
ventilazione
SCOLLEGANO L’APPARECCHIO DALLA PRESA, DI
CORRENTE. INSTALLARE, QUINDI, L’APPARECCHIO
IN UN POSTO ADEGUATO IN MODO CHE SIA FACILE
SCOLLEGARE LA SPINA DI ALIMENTAZIONE IN
CASO DI INCIDENTE. LA SPINA DI ALIMENTAZIONE
DELL’APPARECCHIO DOVREBBE ESSERE
SCOLLEGATA DALLA PRESA AL MURO QUANDO
L’APPRECCHIO RIMANE INUTILIZZATO PER UN
CERTO PERIODO DI TEMPO.
Questo prodotto è conforme alla direttiva sul basso
voltaggio (73/23/CEE emendata 93/68/CEE), direttive
EMC 89/338/CEE, emendata 92/31/CEE e 93/68/CEE
H015A It
H017B It
Questi prodotti, VSX-D712 e VSX-D812/D912 sono
conformi al DM 28/8/1995, Nº548, ottemperando alle
prescrizioni di cui al DM 25/6/1985 (par. 3, All. A) e DM
27/8/1987 (All. I).
H026 It
Download from Www.Somanuals.com. All Manuals Search And Download.
Grazie per aver acquistato questo prodotto Pioneer.
Leggere attentamente questo manuale di istruzioni per familiarizzarsi con l’uso dell’apparec-
chio. Conservare poi il manuale per ogni eventuale futuro riferimento.
Funzionamento di altri
componenti Pioneer . . . . . . . . . . . . . . . . .27
01 Informazioni preliminari
Controllo degli accessori in dotazione . . . . 5
Installazione del ricevitore . . . . . . . . . . . . . 5
Collegamento dei cavi . . . . . . . . . . . . . . . . 5
Inserimento delle pile. . . . . . . . . . . . . . . . . 5
Campo operativo del telecomando . . . . . . . 6
05 Comandi e display
Pannello anteriore . . . . . . . . . . . . . . . . . . .28
Display . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Telecomando. . . . . . . . . . . . . . . . . . . . . . .32
02 Guida in 5 minuti
Introduzione al teatro casalingo . . . . . . . . . 7
Per ascoltare il suono surround . . . . . . . . . 8
Per utilizzare la configurazione rapida . . . 12
06 Riproduzione delle fonti
Introduzione ai modi audio . . . . . . . . . . . .35
Stereo/Diretto . . . . . . . . . . . . . . . . . . . . .35
Modo Standard . . . . . . . . . . . . . . . . . . . .35
Modi Advanced Surround . . . . . . . . . . . .36
Scelta del segnale di entrata . . . . . . . . . . .37
Ascolto della riproduzione multicanale . . .37
Utilizzo dei modi Stereo/Diretto . . . . . . . . .38
Utilizzo del modo Advanced Surround. . . .38
Utilizzo del canale surround posteriore
(Surround Back Channel) (SB CH) . . . . . .39
Utilizzo della modalità virtuale
03 Impostazione rapida del suono
surround (solo per VSX-D912)
Regolazione automatica dell'area di ascolto
(MCACC) . . . . . . . . . . . . . . . . . . . . . . . . . 14
04 Collegamento
Cavi audio/video. . . . . . . . . . . . . . . . . . . . 16
Cavi S-video . . . . . . . . . . . . . . . . . . . . . . . 16
Cavi coassiali audio digitali/Cavi ottici . . . 16
Collegamento di componenti digitali . . . . 17
Collegamento di componenti audio . . . . . 18
Collegamento di componenti per un
surround posteriore
(Virtual Surround Back) (VSB) . . . . . . . . . .40
Utilizzo del modo di ascolto
Midnight e Loudness. . . . . . . . . . . . . . . . .41
Utilizzo dei comandi dei toni . . . . . . . . . . .41
Riproduzione di altre fonti . . . . . . . . . . . . .41
Selezione delle entrate analogiche
multicanali . . . . . . . . . . . . . . . . . . . . . . . .42
Utilizzo del timer di autospegnimento . . . .42
DVD a multicanali . . . . . . . . . . . . . . . . . . 19
Collegamento di componenti video . . . . . 20
Collegamento al terminale video
del pannello anteriore . . . . . . . . . . . . . . 20
Collegamento delle antenne. . . . . . . . . . . 21
Antenna FM a filo . . . . . . . . . . . . . . . . . 21
Antenna AM a telaio . . . . . . . . . . . . . . . 21
Utilizzo di antenne esterne. . . . . . . . . . . 21
Collegamento dei diffusori (VSX-D712). . . 22
Collegamento dei diffusori
(VSX-D812/D912) . . . . . . . . . . . . . . . . . . . 23
Terminali dei diffusori . . . . . . . . . . . . . . 24
Sistema di diffusori A e B . . . . . . . . . . . 24
Suggerimenti per la collocazione
dei diffusori . . . . . . . . . . . . . . . . . . . . . . 24
Collegamento di amplificatori
07 Configurazione
Scelta di configurazione per il ricevitore . .43
Impostazione dei diffusori . . . . . . . . . . . .44
Impostazione di un diffusore
surround posteriore . . . . . . . . . . . . . . . .45
Impostazione del subwoofer . . . . . . . . . .45
Impostazione della frequenza
di crossover. . . . . . . . . . . . . . . . . . . . . . .45
Impostazione attenuatore di LFE . . . . . . .46
Impostazione della distanza del
diffusore anteriore sinistro . . . . . . . . . . .46
Impostazione della distanza del
diffusore centrale . . . . . . . . . . . . . . . . . .46
supplementari . . . . . . . . . . . . . . . . . . . . . 26
Precauzioni riguardanti il cavo
di alimentazione . . . . . . . . . . . . . . . . . . 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Impostazione della distanza del
diffusore anteriore destro. . . . . . . . . . . . 47
Impostazione della distanza del
diffusore surround destro . . . . . . . . . . . 47
Impostazione della distanza di un
diffusore surround posteriore . . . . . . . . 47
Impostazione della distanza del
diffusore surround sinistro. . . . . . . . . . . 47
Impostazione della distanza del
subwoofer . . . . . . . . . . . . . . . . . . . . . . . 47
Impostazione del controllo della
gamma dinamica. . . . . . . . . . . . . . . . . . 48
Impostazione dual mono . . . . . . . . . . . . 48
Impostazione di una entrata del
10 Controllo del resto del sistema
Impostare il telecomando per
controllare altri componenti . . . . . . . . . . .60
Per selezionare direttamente dei
codici di preselezione . . . . . . . . . . . . . . . .60
Programmazione di segnali
provenienti da altri telecomandi
(solo per VSX-D812/D912) . . . . . . . . . . . . .61
Cancellazione di tutte le impostazioni
programmate (solo per VSX-D812/D912) . .62
Cancellazione di tutte le impostazioni
del telecomando . . . . . . . . . . . . . . . . . . . .62
Funzione diretta. . . . . . . . . . . . . . . . . . . . .62
Comandi del televisore . . . . . . . . . . . . . . .63
Comandi di altri componenti . . . . . . . . . . .65
Elenco dei codici di preselezione
canale surround posteriore
(solo per VSX-D812/D912) . . . . . . . . . . . 48
Impostazioni dell’entrata digitale . . . . . . 48
Regolazione manuale dell'area
(solo per VSX-D712). . . . . . . . . . . . . . . . . .67
Elenco dei codici di preselezione
d'ascolto (MCACC) . . . . . . . . . . . . . . . . . . 49
Impostazione dei livelli separati dei
canali per le modalità d'ascolto . . . . . . . . 51
(VSX-D812/D912) . . . . . . . . . . . . . . . . . . . .68
11 Altre informazioni
Soluzione dei problemi . . . . . . . . . . . . . . .70
Reset dell'unità principale . . . . . . . . . . . . .72
Caratteristiche tecniche . . . . . . . . . . . . . .73
Sezione dell’amplificatore . . . . . . . . . . . .73
Sezione video . . . . . . . . . . . . . . . . . . . . .73
Sezione sintonizzatore FM. . . . . . . . . . . .73
Sezione sintonizzatore AM . . . . . . . . . . .73
Vari . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Pulizia dell’apparecchio . . . . . . . . . . . . .74
08 Utilizzo del sintonizzatore
Per ascoltare la radio . . . . . . . . . . . . . . . . 52
Per migliorare l’audio stereo FM . . . . . . 52
Utilizzo dell’attenuatore RF . . . . . . . . . . 52
Sintonizzare direttamente su
una stazione . . . . . . . . . . . . . . . . . . . . . 53
Per memorizzare le stazioni
preselezionate . . . . . . . . . . . . . . . . . . . . . 53
Per assegnare un nome alle
stazioni preselezionate. . . . . . . . . . . . . . 54
Per ascoltare le stazioni
preselezionate . . . . . . . . . . . . . . . . . . . . 55
Introduzione al sistema RDS . . . . . . . . . . 55
Visualizzazione delle
informazioni RDS. . . . . . . . . . . . . . . . . . 56
Ricerca di programmi RDS . . . . . . . . . . 57
Introduzione della funzione EON . . . . . . . 57
Utilizzo del sistema EON . . . . . . . . . . . . 58
Per cancellare la ricerca RDS
"DTS" ,"DTS-ES Extended Surround" e
"Neo:6" sono marchi di fabrica Digital
Theater Systems, Inc.
Prodotto sotto licenza Dolby Laboratories.
"Dolby", "Pro Logic", "Surround EX", ed il
simbolo doppia D sono marchi registrati
della Dolby Laboratories.
ed EON da tutte le stazioni. . . . . . . . . . . 58
09 Per eseguire una registrazione
Per eseguire una registrazione
audio o video . . . . . . . . . . . . . . . . . . . . . . 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Informazioni preliminari
01
Capitolo 1:
Informazioni preliminari
Controllo degli accessori in
dotazione
Collegamento dei cavi
Assicurarsi di non disporre i cavi in modo che
questi si ripieghino sulla parte superiore
dell’apparecchio (come mostrato
Si prega di controllare di aver ricevuto i
seguenti accessori in dotazione:
nell’illustrazione). Se ciò dovesse accadere, il
campo magnetico creato dai trasformatori
contenuti nell’apparecchio potrebbe causare
l’emissione di rumori molesti dai diffusori.
• Antenna AM a telaio
• Antenna FM a filo
• Pile a secco (Formato AA/IEC R6) x 2
• Telecomando
• Microfono (solo per VSX-D912)
• Supporto per microfono (solo per VSX-
D912)
• Qesti istruzioni per l’uso
Installazione del ricevitore
Tenere presente quanto segue:
Inserimento delle pile
• Non appoggiare alcun oggetto
direttamente sulla parte superiore
dell'apparecchio, in quando ciò
causerebbe una dispersione di calore.
• Durante l'installazione di un rack, uno
scaffale, ecc., lasciare uno spazio
superiore a 20 cm sopra il ricevitore.
5
It
Download from Www.Somanuals.com. All Manuals Search And Download.
01
Informazioni preliminari
• Si controlla simultaneamente il ricevitore
con un altro telecomando a raggi
infrarossi.
Importante
L’utilizzo errato delle pile può avere
conseguenze pericolose come perdita di
liquido ed esplosione. Osservare le seguenti
precauzioni:
• Non utilizzare mai una batteria nuova ed
una vecchia allo stesso tempo.
• Inserire le pile con il polo positivo ed il
negativo orientati come indicato dai segni
all’interno del comparto pile.
30
30
• Pile della stessa forma possono avere
tensioni differenti. Non utilizzare pile
differenti allo stesso tempo.
7m
• Quando si eliminano le batterie esaurite,
attenersi alle norme governative o delle
istituzioni preposte all’ambiente in vigore
a livello nazionale o di zona.
Campo operativo del
telecomando
Il telecomando potrebbe non funzionare
correttamente se:
• Vi sono ostacoli interposti tra il telecomando
e il sensore remoto del ricevitore.
• Il sensore remoto si trova esposto alla
luce solare diretta o ad una luce
fluorescente.
• Il ricevitore si trova vicino ad un
dispositivo che emette raggi infrarossi.
6
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Guida in 5 minuti
02
Capitolo 2:
Guida in 5 minuti
Introduzione al teatro casalingo
Se l’utilizzo di un apparato stereo per l’ascolto della musica è probabilmente un’abitudine
quotidiana, ancora non si è familiarizzato con i sistemi di teatro casalingo che offrono un
maggior numero di opzioni (quale il suono surround) per l’ascolto di colonne sonore.
Il teatro casalingo concerne l’utilizzo di varie tracce audio per creare un effetto di suono
surround che fa sentire l’ascoltatore come se fosse nel mezzo dell’azione o del concerto. Il
suono surround così ottenuto dal sistema di teatro casalingo non dipende unicamente dai
diffusori installati nella stanza, ma anche dalla fonte e dall’audio impostato sul ricevitore.
I DVD-Video sono diventati fonte basica per il teatro casalingo grazie alle proprie dimensioni,
alla qualità e alla facilità di utilizzo. A seconda del DVD è possibile l’emissione di sette differenti
tracce audio da un unico disco, tutte inviate a differenti diffusori collegati con l’apparecchio.
Questo sistema crea un effetto di suono surround e offre la sensazione di ‘sentirsi lì’.
Il presente ricevitore decodifica automatica-mente i dischi DVD-Video Dolby Digital, DTS o
Dolby Surround, secondo l’impostazione dei diffusori. Nella maggior parte dei casi non è
necessario effettuare alcun cambio per ottenere un suono surround più realistico, ma nel
capitolo Riproduzione delle fonti a pagina 35 vengono indicate altre possibilità (come l’ascolto di
un CD con l’effetto di suono surround multicanale).
7
It
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Guida in 5 minuti
Per ascoltare il suono surround
Il presente ricevitore è stato fabbricato utilizzando le impostazioni più semplici in modo da poter
effettuare il collegamento in breve tempo, grazie anche alla seguente guida per la
configurazione rapida. Nella maggior parte dei casi è possibile utilizzare il ricevitore con le
impostazioni implicite.
Assicurarsi di aver completato tutti i collegamenti prima di collegare l’apparecchio alla presa di
corrente alternata.
1
Collegare il ricevitore DVD.
Per ottenere il suono surround, è necessario effettuare il collegamento utilizzando una
connessione digitale tra il lettore DVD e il ricevitore. Questo collegamento può venire effettuato
mediante una connessione coassiale o ottica (non è necessario collegarle entrambe). Se il
collegamento viene effettuato mediante un cavo ottico, è necessario rimettersi a Impostazioni
dell’entrata digitale a pagina 48 per fissare l’entrata ottica al DVD.
Utilizzare un cavo video per collegare l’uscita video del lettore DVD al ricevitore servendosi delle
prese, come mostrato nella pagina successiva.
2
Collegare il televisore.
Utilizzare un cavo video per collegare il ricevitore al televisore servendosi delle prese jack, come
mostrato nella pagina successiva.
Cavo ottico
VIDEO IN
Cavo video
Televisore
DIGITAL
OUT
OPT
Ricevitore*
OPT
2
CEN-
TER
DIGITAL OUT
AM
LOOP
FM UNBAL
75
SUB WOOFER
Ω
Cavo
coassiale
AUX
CD
IN
PREOUT
SURROUND
BACK
L
L
DIGITAL
OUT
SURROUND
L
(CD-R/TAPE/MD)
O
P
T
I
N
A
N
T
E
N
N
A
R
R
MONITOR OUT
OPT
1
SURROUND
BACK
L
OPT
OUT
IN
VCR
DVR
/
OUT
IN
(TV
/
2
R
O
R
DVD 7.1CH INPUT
SAT)
CONTROL
F
R
N
T
SURROUND
C
E
N
T
E
R
(
C
D
-
R
/
T
A
P
E
/
M
D
)
OUT
OPT
VIDEO
VCR
DVR
/
VIDE
ROUND BACK
SURROUND
FRONT
ASSIGNABLE
COAX
2
(CD)
IN
IN
L
R
L
R
L
1
S
P
E
T
V
/
T
OUT
SA
(
T
V
/
T
IN
GITAL
IN
IN
SA
)
N
ASSIGNABLE
COAX
DVD
LD
FRONT
MONITOR
OUT
T
V
/
/
DIGITAL
IN
2
SAT
IN
OUT
A
A
N
G
L
E
(
C
D
)
D
V
D
ISTRUCTION
B
D
V
D
P
L
A
Y
E
R
COAX
7.1CH
REC INPUT
ANUAL
SUB
WOOFER
COAX
DVD
LD
/
1
1
IN
CD-R
TAPE
E
OUT
IN
PREOUT
(
D
V
D
IN
Î
4
1
¡
¢
7
8
/
STANDBY/ON
(DVD
IN
/
L
D
)
0
3
/
MD
MONITOR
OUT
R
S
/LD)
S-VIDEO
PLAY
R
AUDIO
L
SUB
Lettore DVD
WOOFER
PREOUT
IN
DVD
LD
FRONT
VIDEO OUT
/
D
V
D
S
7.1CH
REC INPUT
IN
CD-R
TAPE
/
/
MD
Cavo video
* L’illustrazione mostra il VSX-D812/D912, ma i collegamenti del riguardanti il VSX-D712 sono gli
stessi.
8
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Guida in 5 minuti
02
3
Collegare i diffusori.
Viene qui illustrata una serie completa di diffusori (sei diffusori per il VSX-D712 e otto per il VSX-
D812/D912) in ogni caso, la configurazione varia da casa a casa. Basta collegare i diffusori nella
maniera descritta qui in seguito. Il ricevitore potrà funzionare anche solo con due diffusori
stereo (idiffusori anteriori riportati nel diagramma), ma, a garanzia di un suono surround
ottimale, si consiglia di utilizzarne e completamente almento tre.
Assicurarsi di collegare il diffusore sulla destra al terminale destro ed il diffusore sulla sinistra
al terminale sinistro. Assicurarsi inoltre che i teminali positivi e negativi (+/–) sul ricevitore
corrispondano a quelli situati sui diffusori.
Importante
• Utilizzare diffusori con impedenza nominale da 8 Ω a 16 Ω.
• Se non si utilizza un subwoofer, cambiare l’impostazione dei diffusori anteriori (vedere
Impostazione dei diffusori a pagina 44) su “large” (grande).
Diffusori anteriori
Diffusore centrale Diffusori surround
L
R
C
LS
RS
AM
LOOP
FM UNBAL
OUT
MONITOR OUT
SURROUN
DVD 5.1CH INT
OUT
IN
VCR
DVR
/
OUT
IN
CONTROL
OUT
VIDEO
OPT
VCR
DVR
/
FROT
CENTER
SURROUND
FRONT
R
L
R
L
R
L
IN
IN
1
S
P
E
TV
/
OUT
SAT
(
T
V
/
T
IN
IN
IN
SA
)
ASSIGNABLE
COAX
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
2
SAT
IN
FRONT
A
A
K
(
C
D
)
D
V
D
B
5.1CH
SUB
WOOFER
COAX
REC INPUT
DVD
LD
/
1
IN
CD-R
E
R
S
OUT
IN
PREOUT
SURROUND
BACK
(
D
V
D
)
/
TAPE
IN
/
L
D
/
MD
PLAY
S-VIDEO
R
AUDIO
L
VSX-D712
Subwoofer alimentato
SW
9
It
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Guida in 5 minuti
Diffusori anteriori
Diffusore centrale Diffusori surround Diffusori surround posteriori
LS RS SBL SBR
L
R
C
CEN-
TER
SUB WOOFER
AUX
D
IN
PREO
SURROUD
BAK
L
L
DIGITAL
OUT
SURROUND
L
OPT
R
R
MONITOR OUT
SURROUN
BAC
L
OPT
OUT
VCR
DVR
/
OUT
IN
2
R
DVD 7.1CINPUT
CONTROL
FRT
SURROUND
CENTER
(
C
D
-
R
/
T
A
P
E
/
M
D
)
OUT
IN
IN
IN
VIDEO
OPT
1
VCR
DVR
/
FROT
CENTER
SURROUND BACK
SURROUND
FRONT
IN
IN
R
L
R
L
R
L
R
L
S
P
E
TV
/
OUT
SAT
(
T
V
/
T
IN
SA
)
ASSIGNABLE
COAX
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
2
SAT
IN
FRONT
A
A
K
S
I
N
L
E
(
C
D
)
D
V
D
SEE INSTCTION
B
7.1CH
REC INPUT
MANL
SUB
WOOFE
COAX
DVD
LD
/
1
IN
CD-R
TAPE
E
R
S
OUT
IN
PREOUT
(
D
V
D
)
/
IN
/
L
D
/
MD
S-VIDEO
PLAY
R
AUDIO
L
VSX-D812/D912
Subwoofer
passive o
singolo
Subwoofer alimentato
SW
Televisore
surround
INPUT
posteriore
Solo per VSX-D812/D912
• Per utilizzare il diffusore sul televisore come diffusore centrale (C), collegare la presa jack
CENTER PREOUT del presente apparecchio alla presa jack di ingresso audio del televisore.
In questo caso il diffusore centrale illustrato non è necessario.
• Se si sta utilizzando un unico diffusore surround posteriore, collegare il terminale del cavo
positivo al canale destro (+) ed il terminale del cavo negativo al canale negativo (–).
• Sesiselezionasubwoofer(SBSW)durante Impostazionediundiffusoresurroundposteriore a
pagina 45, è possibile collegare un subwoofer in sostituzione dei diffusori ai terminali del
diffusore surround posteriore. Collegare i cavi come illustrato nella pagina precedente (e
come mostrato di seguito), collegando il cavo positivo al terminale del canale destro (+) ed
il cavo negativo al terminale del canale sinistro (–).
10
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Guida in 5 minuti
02
Diffusori
surround
posteriori (o
subwoofer)
VSX-D812/D912
SURROUND BACK
R
L
4
Collegare e accendere successivamente il ricevitore, il lettore DVD, il subwoofer ed il
televisore.
Assicurarsi di aver impostato l’entrata video sul televisore al presente ricevitore. Nel caso in cui
si verifichino delle difficoltà, controllare il manuale fornito in dotazione con il televisore.
Assicurarsi inoltre che venga visualizzato DVD/LD nel display del ricevitore, per indicare la
selezione dell’entrata DVD. In caso contrario, premere DVD sul telecomando per collegare il
ricevitore all’entrata DVD.
5
Premere QUICK SETUP sul pannello anteriore per determinare l'impostazione dei
diffusori, le dimensioni dell'ambiente e la posizione d'ascolto.
Utilizzare il selettore MULTI JOG per effettuare la selezione, quindi ENTER per confermare la
selezione. Vedere Per utilizzare la configurazione rapida a pagina 12 se non si è sicuri delle
impostazioni.
Solo per VSX-D912
• A garanzia di un'impostazione audio surround più completa, raccomandiamo l'utilizzo della
funzione d'impostazione automatica MCACC riportata nel paragrafo Impostazione rapida del
suono surround a pagina 14.
6
Riprodurre un DVD, quindi regolare il volume a piacimento.
È possibile selezionare varie altre opzioni di suono. Vedere Introduzione ai modi audio a pagina 35
per ulteriori informazioni al riguardo. Vedere inoltre Scelta di configurazione per il ricevitore a
pagina 43 per ulteriori opzioni riguardanti l’installazione.
Nota
• A seconda del lettore DVD o dei dischi della fonte, si può ottenere un suono digitale ed
analogico a 2 canali. In questo caso, il modo di ascolto deve venire impostato su STANDARD
(dovrebbe essere già impostato—vedere Ascolto della riproduzione multicanale a pagina 37 se
necessario) se si desidera un suono surround multicanale.
11
It
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Guida in 5 minuti
3
Utilizzare il selettore MULTI JOG per
Per utilizzare la
configurazione rapida
scegliere l’impostazione dei diffusori.
Qualora, alla fase 2, sia stato rilevato un
subwoofer, è possibile selezionare una delle
seguenti opzioni:
È possibile utilizzare la configurazione rapida
per mettere in funzionamento l’apparecchio
premendo un paio di volte il tasto. Il ricevitore
effettua automaticamente le impostazioni ne-
cessarie dopo aver selezionato l'impostazione
dei diffusori, la dimensione dell'ambiente e la
posizione d'ascolto.
2.1ch
3.1ch
4.1ch
7.1ch*
6.1ch
5.1ch
Tenere presente che, con il modello VSX-D912,
queste impostazioni non sono necessarie qua-
lora si utilizzi la funzione d'impostazione auto-
matica MCACC (in questo caso, passare
direttamente al paragrafo Impostazione rapida
del suono surround a pagina 14).
* Solo per VSX-D812/D912
Qualora, alla fase 2, non sia stato rilevato
alcun subwoofer, è possibile selezionare una
delle seguenti opzioni:
Se si desidera effettuare impostare più specifi-
che, si rimanda a Scelta di configurazione per il
ricevitore a pagina 43.
2.0ch
3.0ch
4.0ch
7.0ch*
Utilizzare i comandi del pannello anteriore per
i passi indicati in seguito.
6.0ch
5.0ch
* Solo per VSX-D812/D912
• Controllare la tabella che segue per
trovare l’impostazione dei diffusori
corrispondente all’apparecchio.
MULTI JOG
ENTER
MASTER VOLUME
ADVANCED
SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
MONITOR
TONE
QUICK SETUP
Diffusori Diffusore
anteriori centrale
Sub-
Diffusori Surround
surround poster.
DOWN
UP
MULTI JOG
ENING MODE
VIDEO INPUT
woofer
L
DIMMER
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
R
1
Premere ꢀ STANDBY/ON per
accendere l’apparecchio, se il ricevitore è
spento.
L’indicatore STANDBY si spegne.
2
Premere QUICK SETUP.
diffusore
diffusore
diffusore
diffusore
SW DET lampeggia sul display mentre il
ricevitore verifica le impostazioni del
subwoofer. SW YES o SW NO conferma la
verifica del subwoofer, quindi sul display
viene visualizzato il messaggio di richiesta di
selezione dell'impostazione del diffusore.
* Solo per VSX-D812/D912
12
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Guida in 5 minuti
02
4
5
Premere ENTER.
Utilizzare il selettore MULTI JOG per
scegliere le dimensioni dell’ambiente.
In base alla distanza dei diffusori dalla
posizione di ascolto, scegliere tra Piccolo,
Medio o Grande (S, M o L), dove M
corrisponde ad un ambiente di dimensioni
medie.
6
Premere ENTER.
7
Dal quadrante MULTI JOG per
selezionare la posizione d'ascolto.
É possibile selezionare una delle seguenti
opzioni:
FWD
MID
BACK
FWD – Qualora siate più vicini ai diffusori
anteriori rispetto ai diffusori surround.
MID – Qualora siate a pari distanza dai
diffusori anteriori e surround.
BACK – Qualora siate più vicini ai
diffusori surround rispetto ai diffusori
anteriori.
8
Premere ENTER per confermare
l’impostazione.
Il display visualizza l'impostazione dei
diffusori, le dimensioni dell'ambiente e la
posizione d'ascolto selezionati.
13
It
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Impostazione rapida del suono surround
Capitolo 3:
Impostazione rapida del suono
surround
Solo per VSX-D912
1
Collegare il microfono al jack SETUP
Regolazione automatica
MIC sul pannello anteriore.
dell'area di ascolto (MCACC)
2
Posizionare il microfono nella
Il sistema di regolazione acustica multicanale
(Multi-ChannelAcousticCalibration)(MCACC)
misura le caratteristiche audio dell'area
posizione d'ascolto normale.
Posizionare il microfono a livello delle orec-
chie, nella posizione d'ascolto normale, utiliz-
zando il relativo supporto fornito in dotazione
appoggiato su un tavolo o una sedia.
d'ascolto, tenendo in considerazione il rumore
presente nell'area, la dimensione e la distanza
dei diffusori, e prova il livello e il tempo dei ca-
nali. Dopo aver impostato il microfono fornito
in dotazione, il ricevitore utilizza le informazioni
provenienti da una serie di toni di prova per ot-
timizzare le impostazioni dei diffusori e l'equa-
lizzazione dell'ambiente interessato.
Verificare che non vi siano ostacoli presenti
tra I diffusori e il microfono.
3
Nel caso in cui il ricevitore sia spento,
accenderlo premendo ꢀ STANDBY/ON.
L‘indicatore STANDBY si spegne.
4
In caso di utilizzo di un subwoofer,
accenderlo.
5
6
Premere RECEIVER.
Premere MCACC SETUP.
RECEIVER
Dopo aver premuto MCACC SETUP fare quante
più possibile silenzio. Il sistema emetterà una
serie di toni di prova per determinare il livello
acustico dovuto a rumori presenti nell'ambiente.
Qualora il livello acustico sia troppo elevato,
NOISY! lampeggerà sul display per cinque
secondi. Perriverificareilivelliacustici, premere
MCACC SETUP (fare riferimento alle note qui di
seguito riportate, relative ai livelli acustici
dell'ambiente) o premere ENTER quando viene
richiesto GO NEXT? (Passare al successivo?).
ENTER
MCACC
SETUP
Attenzione
Il sistema verificherà ora le impostazioni del
microfono e del diffusore.
• Questi toni di prova possono essere bassi,
pertanto verificare che nell'area non vi
siano persone che potrebbero spaventarsi
dal tono acustico.
Qualora sul display sia visualizzato il messaggio
ERR, potrebbe esservi un problema a livello di
collegamento del microfono o dei diffusori.
• Verificare che il microfono e I diffusori
non siano spostati durante l'impostazione
MCACC.
14
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Impostazione rapida del suono surround
03
Disattivare l'alimentazione e verificare il
problema indicato dal messaggio ERR (vedi di
seguito), quindi riprovare ad eseguire
Il sistema verifica la dimensione dei diffusori,
il livello e il tempo dei canali. Qualora sia stato
collegato un subwoofer, il sistema verificherà
nuovamente il livello acustico dell'ambiente.
l'impostazione automatica del suono surround.
• ERR MIC – Verificare il collegamento del
microfono.
Una volta completata l'impostazione
automatica del suono surround, il livello del
volume ritornerà normale e sul display sarà
visualizzato COMPLETE, quindi RESUME.
• ERR Fch – Verificare i collegamenti del
diffusore anteriore.
• ERR Sch – Verificare il collegamento del
diffusore surround o del diffusore
surround posteriore.
Nota
• Qualora l'ambiente non fosse ottimale per
la configurazione automatica del surround
(rumore ambientale troppo forte, eco dalle
pareti, ostacoli che impediscono il corretto
funzionamento degli altoparlanti del micro-
fono) è possibile che le impostazioni siano
inadeguate. Assicurarsi che se non siano
presenti apparecchi domestici (condiziona-
tore d'aria, frigorifero, ventilatore, ecc.) che
possano pregiudicare l'ambiente di utilizzo,
ed eventualmente spegnerli.
• ERR SW – Verificare che il subwoofer sia
stato acceso e che sia stato alzato il volume.
7
Utilizzare ꢀ e ꢁ per selezionare il
sistema di diffusori corrispondente alla
propria impostazione.
Selezionare una delle seguenti opzioni:
2.0ch 2.1ch* 3.0ch 3.1ch*
7.1ch*
4.0ch
7.0ch
4.1ch*
• Alcuni vecchi TV possono interferire col
funzionamento del microfono. In tal caso,
spegnere il TV durante la configurazione
automatica del surround.
6.1ch* 6.0ch 5.1ch* 5.0ch
* Indica che nell'impostazione dei diffusori è
previsto un subwoofer
• Se si utilizza il sistema MCACC per confi-
gurare il sistema di altoparlanti si sovra-
scrivono le precedenti impostazioni per le
modalità STANDARD o ADVANCED
SURROUND.
In caso di dubbio circa il sistema di diffusori
da selezionare, fare riferimento alla tabella
riportata a pagina 12.
8
Qualora sia stato selezionato un
sistema di diffusori includente un
subwoofer, premere ENTER per verificare
il livello di uscita del subwoofer.
• Selezionando la modalità STANDARD o
ADVANCED SURROUND, è possibile
controllare le impostazioni effettuate con
MCACC per mezzo di CH SELECT (per con-
trollare i livelli dei canali) o tramite i pas-
saggi descritti nel capitolo relativo Scelta di
configurazione per il ricevitore a pagina 43.
Se il livello di uscita del subwoofer è troppo
alto/basso, SW.VOL.UP/SW.VOL.DWN
lampeggerà sul display per cinque secondi.
Per uscire e verificare il livello di uscita del
subwoofer, premere MCACC SETUP (fare
riferimento alle note di seguito riportate
inerenti i livelli acustici) o semplicemente
alzare o abbassare il volume del subwoofer
(come indicato), quindi premere ENTER alla
visualizzazione del messaggio GO NEXT?.
• In base alle caratteristiche della stanza, è
talvolta possibile che altoparlanti con
dimensioni identiche del cono (circa 12 cm)
necessitino di impostazioni differenti per
le dimensioni. È possibile correggere
l'impostazione manualmente tramite la
procedura di configurazione del ricevitore
descritta a pagina 43.
9
Premere ENTER per completare
l'impostazione automatica del suond
surround.
15
It
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Collegamento
Capitolo 4:
Collegamento
Assicurarsi di effettuare l’inserimento per
intero.
Importante
• Prima di effettuare o modificare i
collegamenti, spegnere l’apparecchio o
scollegare il cavo di alimentazione dalla
presa a muro di corrente alternata (CA).
S VIDEO
Cavi audio/video
Utilizzare cavi audio/video (non forniti in
dotazione) per collegare i componenti audio/
video e un cavo video per collegare il monitor
del televisore.
Cavi coassiali audio digitali/
Cavi ottici
Per collegare componenti digitali al presente
ricevitore vengono utilizzati dei cavi coassiali
audio digitali disponibili sul mercato (si
possono inoltre utilizzare cavi video standard)
o cavi ottici (non forniti in dotazione).
Collegare le spine rosse a R (destra), le spine
bianche a L (sinistra) e le spine gialle a VIDEO.
Assicurarsi di effettuare l’inserimento per
intero.
Assicurarsi di effettuare l’inserimento per
intero.
R
L
VIDEO
Cavo coassiale audio digitale
(o cavo video standard)
Cavo ottico
Cavi S-video
Utilizzare dei cavi S-video (non forniti in
dotazione) per ottenere una riproduzione di
immagine più nitida che con cavi video
normali.
Collegare da una presa S-video situata sulla
parte posteriore del ricevitore alla presa S-
video situata sul componente video che si sta
collegando.
16
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Collegamento
04
Collegamento di componenti digitali
La maniera più semplice di collegare il presente ricevitore per ottenere un suono surround è di
utilizzare una entrata digitale. Questo collegamento può venire effettuato mediante una
connessione coassiale o ottica (non è necessario utilizzare entrambe). La qualità di questi due
tipi di collegamenti è la stessa, ma poiché alcuni componenti digitali hanno un solo tipo di
terminale digitale, bisogna farle corrispondere (per esempio, l’uscita coassiale del componente
con l’entrata coassiale del ricevitore). Il VSX-D712 possiede tre entrate digitali sul pannello
posteriore (due entrate coassiali ed una ottica), e entrambi i modelli VSX-D812 e VSX-D912
prevedono quattro (due entrate coassiali e due ottiche). Collegare i componenti digitali al
pannello posteriore come mostrato in seguito.
Esiste una presa di entrata digitale contrassegnata con DIGITAL OUT. Se la si collega alla
entrata ottica di un registratore digitale (includendo di fatto MD, DAT e CD-R), è possibile
eseguire delle registrazioni digitali con il presente apparecchio.
Quando si collega l’apparecchio, assicurarsi che questo sia spento e che il cavo di
alimentazione sia scollegato dalla presa a corrente alternata.
• Le frecce indicano la direzione del segnale audio digitale.
DIGITAL
OUT
DIGITAL
IN
Registratore CD
Ricevitore*
CEN-
TER
AM
LOOP
SUB WOOFER
FM UNBAL
75
Ω
Solo per VSX-D812/D912
AUX
IN
DIGITAL
OUT
SURROUND
L
CD
IN
OPT
ANTENNA
R
R
MONITOR OUT
SURROUND
BACK
L
OPT
OUT
IN
VCR
DVR
/
OUT
IN
2
DIGITAL
OUT
DVD 7.1CH INPUT
CONTROL
Sintonizzatore
via satellite
(CD-R/TAPE/MD)
OUT
VIDEO
OPT
VCR
DVR
/
FRONT
IN
IN
R
L
1
(TV
SAT)
S
P
E
TV
/
OUT
SAT
/
IN
IN
IN
ASSIGNABLE
COAX
2
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
SAT
IN
FRONT
A
A
K
(CD)
D
V
D
7.1CH
REC INPUT
SUB
WOOFER
COAX
DVD
LD
/
1
IN
CD-R
TAPE
E
R
S
OUT
IN
PREOUT
(DVD
/LD)
/
DIGITAL OUT
COAX
IN
/
MD
S-VIDEO
Lettore CD
PLAY
R
AUDIO
L
DIGITAL OUT
COAX
Lettore DVD
* L’illustrazione mostra il VSX-D812/D912, ma i collegamenti del riguardanti il VSX-D712 sono gli
stessi.
17
It
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Collegamento
Nota
• Se si possiede un lettore LD, è necessario eseguire dei collegamenti speciali per garantire
la riproduzione di LD formattati 2RF sull’apparecchio. In questo caso, collegare
direttamente il lettore DVD o LD ad un demodulatore RF utilizzando una uscita 2RF ed un
collegamento digitale coassiale oppure ottico. Si consiglia inoltre di collegare i componenti
digitali alle prese audio analogiche. Assicurarsi di impostare correttamente l’interruttore
dell’entrata digitale del demodulatore RF (ottica o coassiale a seconda del collegamento).
Vedere il manuale di istruzioni del componente se non si è sicuri delle prese di entrata e di
uscita.
Collegamento di componenti audio
Per avviare la configurazione, collegare i componenti audio analogici (come un vano cassette)
alle prese. Per i componenti con i quali si desidera registrare, è necessario collegare quattro
prese al ricevitore (una serie di entrate stereo e una di uscite stereo), ma per quanto riguarda i
componenti che unicamente permettono la riproduzione, è necessario collegare solo una serie
di cavi stereo. Se si desidera registrare su/da componenti digitali (come un lettore MD) su/da
componenti analogici si devono inoltre collegare i componenti digitali alle prese audio
analogiche. Vedere alla pagina 17 per ulteriori dettagli sui collegamenti digitali.
Quando si collega l’apparecchio, assicurarsi che questo sia spento e che il cavo di
alimentazione sia scollegato dalla presa a corrente alternata.
• Le frecce indicano la direzione del segnale audio.
Ricevitore*
OUTPUT
CEN-
TER
AM
LOOP
SUB WOOFER
FM UNBAL
75
Lettore CD
Ω
L
AUX
IN
DIGITAL
OUT
SURROUND
L
R
CD
IN
OPT
ANTENNA
R
R
MONITOR OUT
SURROUND
BACK
L
OPT
OUT
IN
VCR
DVR
/
OUT
IN
2
DVD 7.1CH INPUT
CONTROL
(CD-R/TAPE/MD)
OUT
VIDEO
OPT
VCR
DVR
/
FRONT
CENTER
SURROUND BACK
S I N G L E
IN
IN
R
L
R
L
1
S
P
E
TV
SAT
/
OUT
(TV
/
IN
IN
IN
SAT)
REC PLAY
2
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
SAT
IN
FRONT
CD-R/Piastra a
cassette/Vano MD
A
A
K
(CD)
D
V
D
SEE INSTRUCTION
7.1CH
REC INPUT
MANUAL
SUB
WOOFER
COAX
DVD
LD
/
1
IN
CD-R
TAPE
E
R
S
OUT
IN
PREOUT
(DVD
/LD)
/
IN
/
MD
S-VIDEO
PLAY
R
AUDIO
L
* L’illustrazione mostra il VSX-D812/D912, ma i collegamenti del riguardanti il VSX-D712 sono gli
stessi.
18
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Collegamento
04
Collegamento di componenti per un DVD a multicanali
Se si preferisce utilizzare un componente separato per decodificare DVD, è possibile collegare
un decodificatore o un lettore DVD con uscite analogiche multicanali alle entrate multicanali.
Quando si collega l’apparecchio, assicurarsi che questo sia spento e che il cavo di
alimentazione sia scollegato dalla presa a corrente alternata.
• Le frecce indicano la direzione del segnale.
CEN-
TER
AM
LOOP
SUB WOOFER
FM UNBAL
75
Ω
AUX
CD
IN
IN
DIGITAL
OUT
SURROUND
L
OP
ANTENNA
R
R
MONITOR OUT
Solo per VSX-D812/D912
SURROUND
BACK
OP
L
OUT
IN
VCR
DVR
/
OUT
IN
2
DVD 7.1CH INPUT
CONTROL
(CD-R/TAPE/MD
OUT
VIDEO
OP
VCR
DVR
/
FRONT
CE
FRO
N
T
SURRO
U
N
D
SURROUND
IN
IN
R
L
OUT
OUTPUT
OUTPUT
BACK OUTPUT
SUB
1
S
E
CENTER
OUTPUT
WOOFER
OUTPUT
VIDEO
SAT
(TV
IN
IN
IN
SA
OUTPUT
ASSIGNABLE
COA
2
DVD
L
L
L
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
SAT
IN
FRONT
A
A
K
(C
D
V
D
I
7.1CH
REC INPUT
SUB
WOOFER
COAX
DVD
LD
/
R
R
R
1
IN
CD-R
TAPE
E
R
S
OUT
IN
PREOUT
(DVD
/LD)
/
IN
/
MD
S-VIDEO
PLAY
R
AUDIO
L
Decodificatore DVD/
multicanale con prese di uscita
analogiche a multicanali
Ricevitore*
* L’illustrazione mostra il VSX-D812/D912, ma i collegamenti del riguardanti il VSX-D712 sono gli
stessi.
Nota
• È possibile utilizzare l’entrata multicanale unicamente quando viene selezionato DVD 5.1
ch (VSX-D712) o DVD 7.1 ch (VSX-D812/D912) (vedere pagina 42).
Solo per VSX-D812/D912
• Se il componente che si sta collegando possiede una sola uscita di canale surround
posteriore, cambiare l’Impostazione di una entrata del canale surround posteriore (pagina 48)
su SB 1ch IN.
19
It
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Collegamento
Collegamento di componenti video
Collegare i componenti video alle prese come mostrato in seguito. Per quanto riguarda i
componenti video (come un lettore DVD), utilizzare i collegamenti illustrati nella presente
pagina per il segnale video, ma per poter utilizzare una fonte digitale (come un DVD) si deve
collegare l’audio ad una entrata digitale (vedere pagina 17). Inoltre è una buona idea collegare
i componenti digitali mediante collegamenti audio analogici (vedere pagina 18).
Per una migliore qualità video, è possibile effettuare il collegamento utilizzando le prese jack
S-video posizionate sulla parte posteriore del ricevitore in luogo delle prese jack video normali.
Assicurarsi che siano collegate al componente video utilizzando lo stesso tipo di collegamenti.
Quando si collega l’apparecchio, assicurarsi che questo sia spento e che il cavo di
alimentazione sia scollegato dalla presa a corrente alternata.
• Le frecce indicano la direzione del segnale.
Vano video
INPUT
VIDEO
L
OUTPUT
VIDEO
Ricevitore*
OUTPUT
VIDEO
L
AM
LOOP
FM UNBAL
75
Ω
AUX
IN
R
R
Sintonizzatore del
TV (o via satellite)
DIGITAL
OUT
L
CD
IN
OPT
ANTENNA
R
R
MONITOR OUT
R
OPT
OUT
IN
VCR
DVR
/
OUT
IN
2
DV
CONTROL
(CD-R/TAPE/MD)
OUT
VIDE
OPT
VCR
DVR
IN
IN
R
1
TV
SAT
/
OUT
(TV
/
IN
IN
IN
SAT)
ASSIGNABLE
COAX
2
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
SAT
IN
FRONT
(CD)
D
V
D
INPUT
VIDEO
7.1CH
SUB
WOOFER
COAX
REC INPUT
DVD
LD
/
1
IN
OUTPUT
CD-R
OUT
IN
PREOUT
(DVD
/LD)
/
I
/
MD
S-VIDEO
VIDEO
PLAY
R
AUDIO
L
Lettore DVD
(o lettore LD)
L
R
Televisore (schermo)
* L’illustrazione mostra il VSX-D812/D912, ma i collegamenti del riguardanti il VSX-D712 sono gli
stessi.
Collegamento al terminale video
O/
T
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
QUICK
SETUP
TONE
SPEAKERS
MULTI JOG
del pannello anteriore
VIDEO INPUT
È possibile accedere ai collegamenti del video
anteriore mediante il pannello anteriore
agendo sul pulsante VIDEO. Esistono delle
prese audio/video e una presa S-video (il VSX-
D912 possiede inoltre di entrata ottica).
Effettuare i collegamenti seguendo il
procedimento eseguito per la connessione
del pannello posteriore.
SETUP
MIC
DIGITAL IN
S-VIDEO
VIDEO
AUDIO
R
Videocamera
(ecc.)
V
L
R
DIGITAL OUT
VIDEO OUTPUT
20
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Collegamento
04
Connettori a scatto dell’antenna
Avvolgere insieme i conduttori esposti del
cavo e inserire nel foro, quindi chiudere il
connettore facendolo scattare.
Collegamento delle antenne
Collegare l’antenna AM a telaio e l’antenna FM a
filo come illustrato nella pagina successiva. Per
migliorare la ricezione e la qualità del suono,
collegare delle antenne esterne (vedere Utilizzo
di antenne esterne qui di seguito). Assicurarsi
sempre che il ricevitore sia spento e staccato
dalla presa a muro prima di effettuare o
modificare qualsiasi collegamento.
10mm
Antenna
AM
a telaio
Utilizzo di antenne esterne
Per migliorare la ricezione FM
Collegare un’antenna esterna FM.
Antenna
AM
LOOP
FM UNBAL
75
FM a filo
Ω
AUX
CD
IN
DIGITAL
OUT
OPT IN
ANTENNA
MONITOR OU
Connettore
Cavo coassiale
OPT
OUT
VCR
DVR
/
OUT
IN
2
PAL al tatto da 75 Ω
CONTROL
(CD-R/TAPE/MD)
OU
IN
IN
IN
VIDEO
OPT
VC
DV
IN
IN
1
TV
/
OUT
SAT
(TV
/
IN
SAT)
AM
LOOP
FM UNBAL
75
ASSIGNABLE
Ω
COAX
2
DVD
MONITOR
OUT
T
/
LD
DIGITAL
IN
S
FRONT
(CD)
D
V
D
7.1CH
REC INPUT
SUB
WOOFER
COAX
DV
LD
1
IN
CD-R
TAPE
OUT
IN
PREOUT
(DVD
/LD)
/
I
ANTENNA
/
MD
S-VIDEO
PLAY
R
AUDIO
L
Per migliorare la ricezione AM
Collegare un filo rivestito di vinile lungo 5–6
metri al terminale dell’antenna AM senza
scollegare l’antenna AM a telaio fornita in
dotazione.
Antenna FM a filo
Collegare l'antenna FM a filo ed estenderla
completamente in senso verticale lungo l'inte-
laiatura di una finestra o altro luogo appropria-
to che garantisca una buona ricezione.
Per la migliore ricezione possibile,
sospendere orizzontalmente all’esterno.
Antenna AM a telaio
Antenna
esterna
Montare l’antenna e collegarla al ricevitore.
Effettuare il collegamento (se necessario) e
orientarla nella direzione che consente la
ricezione ottimale.
5–6m
Antenna interna
(filo rivestito in vinile)
AM
LOOP
FM UNBAL
75
Ω
ANTENNA
21
It
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Collegamento
Collegamento dei diffusori (VSX-D712)
Viene qui di seguito illustrata una serie completa di sei diffusori (subwoofer incluso), ma la
configurazione varia da casa a casa. Basta collegare i diffusori nella maniera descritta qui in
seguito. Il ricevitore potrà funzionare anche solo con due diffusori stereo (i diffusori anteriori
riportati nel diagramma), ma, a garanzia di un suono surround ottimale, si consiglia di
utilizzarne e completamente almento tre. Se non si utilizza un subwoofer, cambiare
l’impostazione dei diffusori anteriori (vedere Impostazione dei diffusori a pagina 44) su “large”
(grande).
Assicurarsi di collegare il diffusore sulla destra al terminale destro ed il diffusore sulla sinistra
al terminale sinistro. Assicurarsi inoltre che i teminali positivi e negativi (+/–) sul ricevitore
corrispondano a quelli situati sui diffusori.
Assicurarsi di aver completato tutti i collegamenti prima di collegare l’apparecchio alla presa di
corrente alternata.
Importante
• Utilizzare diffusori con impedenza nominale da 8 Ω a 16 Ω.
Diffusori anteriori
Diffusore centrale Diffusori surround
L
R
C
LS
RS
AM
LOOP
FM UNBAL
OUT
MONITOR OUT
SURROUN
DVD 5.1CH INT
OUT
IN
VCR
DVR
/
OUT
IN
CONTROL
OUT
VIDEO
OPT
VCR
DVR
/
FRT
CENTER
SURROUND
FRONT
R
L
R
L
R
L
IN
IN
1
S
P
E
TV
/
OUT
SAT
(
T
V
/
T
IN
IN
IN
SA
)
ASSIGNABLE
COAX
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
2
SAT
IN
FRONT
A
A
K
(
C
D
)
D
V
D
B
5.1CH
SUB
WOOFER
COAX
REC INPUT
DVD
LD
/
1
IN
CD-R
E
R
S
OUT
IN
PREOUT
SURROUND
BACK
(
D
V
D
)
/
TAPE
IN
/
L
D
/
MD
PLAY
S-VIDEO
R
AUDIO
L
VSX-D712
SW
22
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Collegamento
04
Collegamento dei diffusori (VSX-D812/D912)
Viene qui di seguito illustrata una serie completa di otto diffusori (subwoofer incluso), ma la
configurazione varia da casa a casa. Basta collegare i diffusori nella maniera descritta qui in
seguito. Il ricevitore potrà funzionare anche solo con due diffusori stereo (i diffusori anteriori
riportati nel diagramma), ma, a garanzia di un suono surround ottimale, si consiglia di
utilizzarne e completamente almento tre. Se non si utilizza un subwoofer, cambiare
l’impostazione dei diffusori anteriori (vedere Impostazione dei diffusori a pagina 44) su “large”
(grande).
Assicurarsi di collegare il diffusore sulla destra al terminale destro ed il diffusore sulla sinistra
al terminale sinistro. Assicurarsi inoltre che i teminali positivi e negativi (+/–) sul ricevitore
corrispondano a quelli situati sui diffusori.
Assicurarsi di aver completato tutti i collegamenti prima di collegare l’apparecchio alla presa di
corrente alternata.
Importante
• Utilizzare diffusori con impedenza nominale da 8 Ω a 16 Ω.
Diffusori anteriori
Diffusore centrale Diffusori surround Diffusori surround posteriori
LS RS SBL SBR
L
R
C
CEN-
TER
SUB WOOFER
AUX
IN
PREOU
SURROU
BA
L
L
DIGITAL
OUT
SURROUND
OPT
R
MONITOR OUT
SURROUN
BAC
L
OPT
OUT
VCR
DVR
/
OUT
IN
2
R
DVD 7.1CNPUT
CONTROL
FRT
SURROUND
CENTER
(
C
D
-
R
/
T
A
P
E
/
M
D
)
OUT
IN
IN
IN
VIDEO
OPT
1
VCR
DVR
/
FRT
CENTER
SURROUND BACK
SURROUND
FRONT
IN
IN
R
L
R
L
R
L
R
L
S
P
E
TV
/
OUT
SAT
(
T
V
/
T
IN
SA
)
ASSIGNABLE
COAX
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
2
SAT
IN
FRONT
A
A
K
S
I
N
L
E
(
C
D
)
D
V
D
SEE INSTRCTION
B
7.1CH
REC INPUT
MANL
SUB
WOOFER
COAX
DVD
LD
/
1
IN
CD-R
TAPE
E
R
S
OUT
IN
PREOUT
(
D
V
D
)
/
IN
/
L
D
/
MD
-VIDEO
PLAY
R
AUDIO
L
VSX-D812/D912
Subwoofer
passive o
singolo
Subwoofer alimentato
SW
Televisore
INPUT
posteriore
23
It
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Collegamento
Sistema di diffusori A e B
Il ricevitore ha due sistemi di diffusori: A e B. A è
il sistema di diffusori principale che supporta la
serie completa di diffusori. Se si attivano
Nota
• Quando si utilizza un diffusore sul televisore
come il diffusore centrale (C), collegare la
presa CENTER PREOUT del presente
apparecchio alla presa di entrata audio del
televisore. In questo caso il diffusore
centrale illustrato non è necessario.
• Se si sta utilizzando un unico diffusore sur-
round posteriore, collegare il terminale del
cavo positivo al canale destro (+) ed il ter-
minale del cavo negativo al canale negativo
(–) (vedere l’illustrazione a pagina 11).
• Se si seleziona subwoofer (SB SW) durante
I’Impostazione di un diffusore surround
posteriore a pagina 45, è possibile collegare
un subwoofer in sostituzione dei diffusori ai
terminali del diffusore surround posteriore.
Collegare il terminale del cavo positivo al
canale destro (+) ed il terminale del cavo
negativo al canale negativo (–) (vedere
l’illustrazione a pagina 11).
entrambi i sistemi diffusori A e B, sarà udibile
soltanto il suono emesso dai diffusori anteriori e
dal subwoofer (attivi). Nessun suono verrà
emesso dal diffusore centrale o dai diffusori
surround o surround posteriori, ma le fonti
multicanale verranno indirizzate ai diffusori attivi
e nessun suono verrà perso. Allo stesso modo,
se si sceglie soltanto il sistema B, sarà udibile
soltanto il suono emesso dai diffusori anteriori
collegati al sistema B e le fonti multicanale
verranno indirizzate a questi due diffusori.
•
Premere il pulsante SPEAKERS sul
pannello anteriore per commutare tra I
diversi sistemi di diffusori (A, B o
entrambi).
Suggerimenti per la collocazione dei
diffusori
I diffusori vengono fabbricati solitamente per
un ambiente concreto. Alcuni sono progettati
per la collocazione sul pavimento, mentre altri
vanno posizionati su basamenti per poter fun-
zionare al meglio. Alcuni vanno collocati
vicino ad una parete; altri devono stare lontani
dalle pareti. Qui vengono offerti dei
Terminali dei diffusori
1
2
3
10mm
suggerimenti utili per ottenere il miglior audio
dai diffusori (seguente), ma è inoltre possibile
seguire le linee guida sulla collocazione dei
diffusori fornite dai produttori assieme ai
diffusori per ottenere il meglio della loro
prestazione.
1
Avvolgere insieme i conduttori esposti
del cavo.
2
Allentare il terminale dei diffusori e
inserire il cavo.
• Sistemare i diffusori anteriori sinistro e
destro ad uguale distanza rispetto al
televisore.
• Quando si installano i diffusori vicino al
televisore, si consiglia di utilizzare
diffusori schermati magneticamente per
evitare possibili interferenze, come la
distorsione del colore dell’immagine
quando il televiso-re si trova acceso. Se
Assicurarsi che tutti i cavi scoperti dei
diffusori siano avvolti insieme e inserirli per
intero nei terminali dei diffusori. Qualora vi
siano dei cavi scoperti dei diffusori a contatto
con il pannello posteriore al momento
dell'accensione dell'apparecchio, questi
potrebbe spegnersi, quale misura di
sicurezza. Per collegare i diffusori al ricevitore,
utilizzare dei cavi di ottima qualità.
3
Stringere il terminale.
24
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Collegamento
04
non si dispone di diffusori schermati
magneticamente e si notano distorsioni
nel colore dell’immagine televisiva,
allontanare i diffusori dal televisore.
• Sistemare il diffusore centrale sopra o sotto
il televisore in modo che il suono del canale
centrale sia localizzato in corrispondenza
dello schermo del televisore.
Vista dall’alto della configurazione dei
diffusori
Anteriore
sinistro
Anteriore
destro
Centrale
Subwoofer
• Se possibile, sistemare i diffusori
surround leggermente al di sopra del
livello delle orecchie.
Surround
sinistro
Surround
destro
• Cercare di mantenere i diffusori surround
e i diffusori anteriori e quello centrale
equidistanti rispetto alla posizione di
ascolto. Diversamente si potrebbe
indebolire l’effetto audio surround.
• Per ottenere il miglior audio surround
possibile, installareidiffusoricomeillustrato
in seguito. Assicurarsi che tutti i diffusori
siano installati con sicurezza per evitare
incidenti e migliorare la qualità del suono.
Posizione di ascolto
Surround posteriore
sinistro
Surround posteriore
destro
Diffusore singolo surround posteriore
Vista 3-D della configurazione dei
diffusori channel 6.1
Attenzione
• Se si sceglie di installare il diffusore
centrale sopra il televisore, accertarsi di
fissarlo con mastice o altri mezzi idonei,
altrimenti il diffusore potrebbe cadere dal
televisore in seguito a scosse esterne come
in caso di terremoti, causando lesioni alle
persone e riportando danneggiamenti.
Vista 3-D della configurazione dei
diffusori channel 7.1
25
It
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Collegamento
Collegamento di amplificatori supplementari
Il presente ricevitore ha una potenza più che sufficiente per qualsiasi uso domestico, tuttavia è
possibile aggiungere amplificatori supplementari a ciascun canale sul VSX-D812/D912 o il
canale surround back del VSX-D712. Eseguire i collegamenti illustrati qui di seguito per
aggiungere amplificatori in modo da alimentare i diffusori. Assicurarsi sempre che il ricevitore
sia spento e staccato dalla presa a muro prima di effettuare o modificare qualsiasi
collegamento.
• Le frecce indicano la direzione del segnale audio.
VSX-D712
CEN-
TER
SUB WOOFER
AM
LOOP
FM UNBAL
75
Ω
AUX
CD
IN
Subwoofer
alimentato
DIGITAL
OUT
IN
OPT
ANTENNA
R
L
MONITOR OUT
SURROUND
INPUT
DVD 5.1CH INPUT
OUT
IN
VCR
DVR
/
OUT
IN
CONTROL
OUT
VIDEO
OPT
VCR
DVR
/
FRONT
R
L
IN
IN
1
S
P
E
TV
/
OUT
SAT
(TV
/
IN
IN
IN
SAT)
ASSIGNABLE
COAX
2
DVD
MONITOR
OUT
T
V
/
/
LD
DIGITAL
IN
SAT
IN
FRONT
A
A
K
(CD)
D
V
D
5.1CH
SUB
WOOFER
COAX
REC INPUT
DVD
LD
/
1
IN
CD-R
E
R
S
OUT
IN
PREOUT
SURROUND
BACK
(DVD
/LD)
Amplificatore o diffusore
potenziato del canale
surround posteriore
/
TAPE
IN
/
MD
ANALOG IN
PLAY
S-VIDEO
R
AUDIO
L
ANALOG IN
Ampl. canale
anteriore
L
R
VSX-D812/D912
ANALOG IN
AM
FM UNBAL
75
Ampl. canale
surround
LOOP
Ω
AUX
IN
PREOUT
SURROUND
BACK
L
L
DIGITAL
OUT
/
CD
L
R
IN
OPT
ANTENNA
MO
OPT
OUT
IN
VCR
DVR
/
OUT
IN
2
R
R
ANALOG IN
CONTROL
FRONT
SURROUND
CENTER
(CD-R/TAPE/MD)
Ampl. canale
surround posteriore
VIDEO
OPT
IN
OUT
ACK
SURROUND
FRONT
L
R
L
R
L
1
TV
/
SAT
(TV
/
IN
IN
SAT)
IN
ASSIGNABLE
COAX
2
DVD
MONITOR
OUT
/
LD
DIGITAL
IN
FRONT
L
E
(CD)
D
V
D
CTION
B
L
7.1CH
REC INPUT
SUB
WOOFER
COAX
1
IN
CD-R
TAPE
OUT
IN
PREOUT
(DVD
/LD)
/
ANALOG IN
/
MD
Ampl. canale
centrale
S-V
PLAY
R
AUDIO
L
INPUT
Subwoofer
alimentato
26
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Collegamento
04
Funzionamento di altri
componenti Pioneer
Nota
• Per sentire l’audio solo dalle uscite
preamplificate, scollegare tutti i diffusori
direttamente collegati al diffusore.
Collegando un cavo di controllo (opzionale), è
possibile puntare i telecomandi di altri
componenti Pioneer verso il sensore remoto
del ricevitore. I segnali del telecomando
vengono ricevuti dal sensore remoto del
presente apparecchio ed inviati ad altri
dispositivi mediante il morsetto CONTROL
OUT del ricevitore.
• Se non si utilizza un subwoofer, cambiare
l’impostazione dei diffusori anteriori
(vedere Impostazione dei diffusori a
pagina 44) su “large” (grande).
• Solo per VSX-D712 – se collegato ad un
diffusore surround posteriore, utilizzare
Impostazione di un diffusore surround
posteriore a pagina 45 ed impostare la
dimensione adeguata per il diffusore.
CONTROL
OUT
IN
IN
CONTROL
OUT
Ricevitore
Attenzione
• Questi morsetti dei diffusori sono
pericolosi, quando in tensione. Per evitare
qualsiasi rischio di scossa elettrica
durante il collegamento o lo
scollegamento dei cavi dei diffusori,
scollegare il cavo d'alimentazione.
Altri prodotti Pioneer
con terminale CONTROL
Telecomando
Collegare al morsetto
CONTROL di altri prodotti
Pioneer compatibili
Precauzioni riguardanti il cavo di
alimentazione
Afferrare il cavo di alimentazione dalla presa.
Non staccare la spina tirando il cavo e non
toccare il cavo di alimentazione con le mani
bagnate in quanto si potrebbe verificare un
corto circuito o una scossa elettrica. Non
collocare mai l’apparecchio, un mobile, ecc.
sul cavo di alimentazione e non stringere il
cavo. Non annodare mai il cavo e non legarlo
con altri fili. I cavi di alimentazione
andrebbero instradati in maniera tale da non
essere mai calpestati. Un cavo elettrico
danneggiato potrebbe causare un incendio o
provocare una scossa elettrica. Controllare il
cavo di alimentazione di tanto in tanto. Se si
scopre che è danneggiato, richiedere un cavo
sostitutivo al più vicino centro di assistenza
autorizzato Pioneer.
27
It
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Comandi e display
Capitolo 5:
Comandi e display
Pannello anteriore
1
2
3
4
5
6
MULTI JOG
DVD/LD
TV/SAT
VCR/DVR
TUNER
VIDEO
AUX
ENTER
CD-R/
TAPE/MD
CD
MASTER VOLUME
STANDBY
DOWN
UP
STANDBY/ON
PHONES
8
7
9
10
11
12 13 14 15 16 17
ADVANCED
SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
SB CH
MODE
QUICK
SETUP
TONE
STATION
TUNING
STANDARD
SPEAKERS
MULTI JOG
PHONES SURR.
VIDEO INPUT
LISTENING MODE
PTY
SEARCH
EON
MODE
TUNER EDIT
MULTI JOG
CLASS
BAND
MPX
SETUP
MIC
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
26 25 24 23 22 21
20 19
18
1
ꢀ STANDBY/ON
5
6
ENTER
Selettore MULTI JOG
Scorre tra il modo di accensione e quello di
attesa del ricevitore.
Si può utilizzare il selettore MULTI JOG per
vari scopi. Utilizzare questo tasto per
selezionare delle opzioni dopo aver premuto
TONE, QUICK SETUP o TUNER EDIT.
2
Tasti per la selezione dell’ingresso
Premere per selezionare una fonte d'ingresso.
3
Indicatore STANDBY
Si illumina quando il ricevitore si trova in
modo di attesa.
7
MASTER VOLUME
8
Presa PHONES
4
Sensore remoto
Utilizzare per collegare le cuffie. Una volta
collegate le cuffie, i diffusori non emettono
alcun suono.
Riceve i segnali dal telecomando.
28
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Comandi e display
05
9
Tasti STATION +/–
17 QUICK SETUP
Seleziona le stazioni preselezionate quando si
utilizza il sintonizzatore (pagina 55).
Vedere Per utilizzare la configurazione rapida a
pagina 12.
10 Tasti TUNING +/–
18 VIDEO INPUT
Seleziona la frequenza quando si utilizza il
sintonizzatore (pagina 52).
Vedere Collegamento al terminale video del
pannello anteriore a pagina 20.
11 Tasti LISTENING MODE
19 DIGITAL IN
Solo per VSX-D912
STANDARD
Vedere Collegamento al terminale video del
pannello anteriore a pagina 20.
Premere per effettuare la decodificazione
standard e scorrere tra le varie opzioni Pro
Logic II e Neo:6 (pagina 37).
20 SETUP MIC
olo per VSX-D912
ADVANCED SURROUND
Utilizzare per scorrere tra i vari modi
Surround (pagina 38).
Collegare il microfono fornito in dotazione alla
presa jack SETUP MIC, utilizzando
l'impostazione automatica surround
(MCACC) (pagina 14).
STEREO/DIRECT
Commuta tra riproduzione diretta e
stereo. La riproduzione diretta ignora i
circuiti di controllo dei toni e i livelli dei
canali per una riproduzione più accurata
di una fonte di programma (pagina 38).
21 EON MODE
Utilizzare per la ricerca di vari programmi che
trasmettono notizie sul traffico o informazioni
(questo metodo di ricerca viene chiamato
EON) (pagina 57).
12 SIGNAL SELECT
Utilizzare per effettuare una selezione tra i
segnali di entrata (pagina 37).
22 PTY SEARCH
Utilizzare per la ricerca di vari tipi di
programmi nel modo RDS (pagina 57).
13 MIDNIGHT/LOUDNESS
Utilizzare Midnight per ascoltare colonne
sonore di film a basso volume. Utilizzare
Loudness per rialzare i suoni bassi e alti a
basso volume (pagina 41).
23 MPX
Premere questo tasto per ricevere una
trasmissione radio nel modo monoaurale
(pagina 52).
14 SPEAKERS
24 BAND
Utilizzare per scorrere sul sistema dei diffusori:
A ꢂ B ꢂ A+B (pagina 24)
Scorre tra le bande radio AM e FM
(pagina 52).
15 SB CH MODE
25 CLASS
Seleziona la modalità canale surround
posteriore (pagina 39) la modalità virtuale
surround posteriore (Virtual Surround Back)
(VSB) (pagina 40).
Scorre i tre gruppi (categorie) di stazioni
preselezionate (pagina 53).
26 TUNER EDIT
Premere per memorizzare ed assegnare un
nome alla stazione per il richiamo (pagina 53).
16 TONE
Premere questo tasto per accedere ai
comandi dei suoni bassi e alti, che si possono
quindi regolare mediante il selettore MULTI
JOG (pagina 41).
29
It
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Comandi e display
Display
1
2
3
4
5 6
7
8
9
10 1112 13 14
RFATT EON
RDS
SP A B
15 16
Indicatori SIGNAL SELECT
17
18
19
20
1
3 2DIGITAL
Si illuminano per indicare il tipo di segnale in
entrata assegnato per il corrente componente:
Quando è attivato il modo STANDARD del
ricevitore, questo indicatore si illumina per
indicare la decodificazione di un segnale
Dolby Digital.
AUTO
Si illumina quando la selezione del
segnale AUTO è attivata.
4 2PRO LOGIC II
Quando è attivato il modo (STANDARD) Pro
Logic II del ricevitore, questo indicatore si
illumina per indicare la decodificazione di
Prologic II.
SB
A seconda della fonte, si illumina quando
viene ravvisato un segnale con il canale
surround posteriore decodificato.
5
VIR.SB
DIGITAL
S'illumina durante l'attivazione della modalità
virtuale surround posteriore (Virtual surround
back).
Si illumina quando viene ravvisato un
segnale audio digitale.
2DIGITAL
Si illumina quando viene ravvisato un
segnale Dolby Digital.
6
ATT
Si illumina quando si utilizza INPUT ATT per
attenuare (ridurre) il livello del segnale in
entrata.
ANALOG
Si illumina quando viene ravvisato un
segnale analogico.
7
DIRECT
Si illumina quando si trova in funzionamento la
riproduzione diretta di una fonte. La
DTS
riproduzione diretta ignora i circuiti di controllo
dei toni e i livelli dei canali per una riproduzione
più accurata di una fonte di programma.
Si illumina quando viene ravvisata una
fonte con segnale audio DTS.
2
DTS
8
MIDNIGHT
Quando è attivato il modo STANDARD del
ricevitore, questo indicatore si illumina per
indicare la decodificazione di un segnale DTS.
Si illumina durante la riproduzione Midnight.
30
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Comandi e display
05
9
SLEEP
MONO
Si illumina quando il ricevitore è in modalità
autospegnimento.
Si illumina quando si imposta il modo
monoaurale con il tasto MPX.
10 RF ATT
TUNED
Si illumina quando è attivo l'attenuatore RF
(vedere pagina 52).
Si illumina durante la ricezione di una
trasmissione.
11 Indicatore dei diffusori
Mostra il sistema dei diffusori attualmente in
uso.
20 Livello del volume di masterizzazione
Mostra il livello del volume generale. ---dB
indica il livello minimo e -0 dB indica il
massimo livello.
12 EON
A seconda dei livelli di impostazione utilizzati
per ogni canale, il livello massimo può
trovarsi tra una gamma di –10 dB e –0 dB.
Una volta impostato il modo EON, l’indicatore
EON si illumina, ma durante la ricezione vera
e propria di una trasmissione EON
l’indicatore EON lampeggia.
13 Indicatore
L’indicatore si illumina per segnalare che la
stazione attualmente sintonizzata offre il
servizio di dati EON.
14 RDS
Si illumina quando viene ricevuta una
trasmissione RDS.
15 Display caratteri
16 Neo:6
Quando la modalità (STANDARD) NEO:6 del
ricevitore è attivata, s'illumina per indicare
l'attivazione di NEO:6.
17 ADV.SURR. (Surround Avanzata)
Si illumina quando vengono selezionati i modi
Advanced Surround.
18 LOUDNESS
Si illumina quando viene selezionato
LOUDNESS.
19 Indicatori TUNER
STEREO
Si illumina quando si riceve una
trasmissione FM stereo nel modo stereo
automatico.
31
It
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Comandi e display
Telecomando
RECEIVER
Attiva il telecomando per azionare il
ricevitore (utilizzato per selezionare
funzioni quali SLEEP, MCACC SETUP,
ecc). Utilizzare inoltre questo tasto per
configurare il suono surround (pagina 43,
pagina 49).
10
11
12
RECEIVER
SOURCE
INPUT SELECT
1
2
MULTI CONTROL
DVD/LD
C D
TV / SAT
VCR/DVR
TV CONT
RECEIVER
3
Tasti RECEIVER CONTROL
CD-R/TAPE
TUNER
ADVANCED
STEREO/
DIRECT
MIDNIGHT/
LOUDNESS
STANDARD SURROUND
STANDARD
TEST
CH
Premere per effettuare la decodificazione
standard e scorrere tra le varie opzioni Pro
Logic II e Neo:6 (pagina 37).
SELECT
MUTE
LEVEL
TONE
3
4
FL
EFFECT
DIMMER
RECEIVER CONTROL
MASTER
VOLUME
ADVANCED SURROUND
Utilizzare per scorrere tra i vari modi
Surround (pagina 38).
TOP MENU
MENU
SETUP
TUNE
5
5
INPUT ATT
T.EDIT
ST
ST
ENTER
6
STEREO/DIRECT
GUIDE
AUDIO
SUBTITLE
Commuta tra riproduzione diretta e
stereo. La riproduzione diretta ignora i
circuiti di controllo dei toni e i livelli dei
canali per una riproduzione più accurata
di una fonte di programma (pagina 38).
TUNE
MCACC
SETUP
SLEEP
A
RETURN
BAND
RF ATT
DISPLAY
CLASS
MPX
D.ACCESS
7
B
C
D
E
DISC
MIDNIGHT/LOUDNESS
Utilizzare per passare all’ascolto Midnight
o Loudness (pagina 41).
ENTER
13
14
1
4
7
2
5
8
3
6
9
+
10
8
9
0
CH SELECT
TV CONTROL
Seleziona un diffusore durante la
configurazione del suono surround del
ricevitore (pagina 51).
CHANNEL
CHANNEL
VOLUME
LEVEL +/–
Regola i livelli del suono surround del
ricevitore (pagina 51).
RECEIVER
TEST TONE
1
RECEIVERꢀ
Emette il suono di prova durante la
configurazione del suono surround del
ricevitore (pagina 51).
Scorre tra il modo di accensione e quello di
attesa del ricevitore.
2
Tasti MULTI CONTROL
MUTE
Premere per selezionare il controllo di altri
componenti (vedere Controllo del resto del
sistema a pagina 60).
Elimina l’audio (o lo ripristina se è stato
eliminato).
32
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Comandi e display
05
EFFECT +/–
GUIDE
Aggiunge o sottrae la quantità di effetti
con diversi modi di ascolto avanzato
(pagina 38).
Visualizza le guide su un televisore
digitale.
SUBTITLE
FL DIMMER
Rende più oscuro o più chiaro il display.
Visualizza/modifica i sottotitoli compresi
nei dischi DVD-Video multilingue.
4
5
MASTER VOLUME +/–
Utilizzare per impostare il volume di
ascolto.
SLEEP
Utilizzarlo per mettere il ricevitore in
modalità autospegnimento e selezionare
il tempo intercorrente prima dello
spegnimento del ricevitore stesso.
Tasti del ricevitore e di controllo
componenti (Per accedervi, premere
innanzitutto il relativo pulsante MULTI
CONTROL).
Questi comandi funzionano in base ai
componenti selezionati.
6
ꢃꢄꢁꢀ (TUNE +/–, ST +/–) /ENTER
Utilizzare questi tasti con frecce durante
la configurazione del sistema di suono
surround (vedere pagina 43). Vengono
inoltre utilizzati per controllare i menu/le
opzioni del DVD e per la piastra 1 di un
riproduttore con due piastre a cassette.
Utilizzare i tasti TUNE +/– per trovare
frequenze radio ed utilizzare ST +/– per
trovare stazioni preselezionate
TOP MENU
Visualizza il menu superiore del disco di
un DVD.
AUDIO
Modifica la lingua dell'audio o il canale
nei dischi DVD.
(pagina 55).
7
Tasti di comando componente/
MCACC SETUP
sintonizzatore
Utilizzarlo per impostare il sistema di
diffusori tramite il sistema di regolazione
acustica multicanali.
I tasti principali (ꢁ, ꢂ, ecc.) vengono utilizzati
per il controllo di un componente dopo averlo
selezionato mediante i tasti MULTI
CONTROL. Si può accedere ai comandi del
sintonizzatore/DTV sopra questi tasti dopo
aver selezionato il tasto corrispondente
MULTI CONTROL (TUNER o TV/SAT, se
collegato al DTV).
MENU
Visualizza il menu del disco di DVD-Video .
Visualizza inoltre i menu del televisore e
del DTV.
INPUT ATT
Attenua (abbassa) il livello di un segnale
di entrata analogico in modo da prevenire
distorsioni.
RETURN
Utilizzando un sintonizzatore TV digitale,
ritorna all'ultima schermata selezionata.
T.EDIT
BAND
Utilizzare per memorizzare ed assegnare
un nome alle stazioni per il richiamo,
agendo sui pulsanti STATION +/– (vedere
pagina 53).
Scorre tra le bande AM e FM quando si
trova selezionato il sintonizzatore
(pagina 52).
33
It
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Comandi e display
RF ATT
13 DISC (ENTER)
Utilizzare per abbassare il livello di
entrata di un segnale radio troppo potente
o che presenta interferenze che causano
quindi distorsioni del ricevitore
(pagina 52).
L’utilizzo del tasto dipende dal componente
selezionato. Può essere utilizzato per immet-
tere I comandi per TV o DTV ed anche per sele-
zionare un disco da un lettore multi-CD.
14 Tasti TV CONTROL
DISPLAY
Questi tasti sono dedicati al controllo del tele-
visore assegnato al tasto TV CONT. Quindi, se
si ha un solo televisore da collegare al
presente apparecchio, assegnarlo al tasto TV
CONT MULTI CONTROL. Se si hanno due
televisori, assegnare il televisore principale al
tasto TV CONT.
Per commutare il display tra nome
predefinito della stazione, frequenza e
dati RDS durante l’utilizzo del
sintonizzatore.
CLASS
Scorre i tre gruppi (categorie) di stazioni
preselezionate (pagina 53).
ꢀ
Utilizzare per accendere/spegnere il tele-
visore.
MPX
Scorre tra la ricezione automatica stereo-
fonica e monoaurale di una trasmissione
FM. Se il segnale è debole, passando a
monoaurale si migliora la qualità del
suono (pagina 52).
(TV CONTROL) INPUT SELECT
Utilizzare per selezionare la funzione del
televisore.
CHANNEL +/–
D.ACCESS
Utilizzare per selezionare canale.
Dopo aver premuto, è possibile accedere
direttamente ad una stazione radio utiliz-
zando i tasti numerici (pagina 53).
VOLUME +/–
Utilizzare per regolare il volume sul televi-
sore.
8
Tasti numerici
Utilizzare i tasti numerici per selezionare
direttamente una frequenza radio (pagina 53)
o le tracce di un CD, DVD, ecc.
9
CHANNEL +/–
Utilizzarlo per selezionare i canali durante
l'utilizzo di un VCR, DVR, ecc.
10 INPUT SELECT
Utilizzare per selezionare una fonte di entrata.
11 LED
Si illumina quando viene inviato un comando
dal telecomando.
12 SOURCEꢀ
Premere per attivare/disattivare altri compo-
nenti collegati al ricevitore.
34
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Riproduzione delle fonti
06
Capitolo 6:
Riproduzione delle fonti
Si può identificare il materiale Dolby Digital
mediante i marchi 1o
Introduzione ai modi audio
.
Esistono tre opzioni sonore basiche: Stereo/
Diretto (STEREO /DIRECT), Standard (STAN-
DARD) o Advanced Surround (ADVANCED
SURROUND).
Gran parte del materiale Dolby Surround reca
il marchio 3, ma anche materiale sen-
za marchio potrebbe incorporare il Dolby Sur-
round. A seconda della fonte e del modo del
suono selezionato, potrebbe non ottenersi al-
cun audio dai diffusori surround posteriori nel-
la configurazione. Per maggiori informazioni
al riguardo, fare riferimento a Utilizzo della
modalità virtuale surround posteriore (Virtual
Surround Back) (VSB) a pagina 40 e Utilizzo del
canale surround posteriore (Surround Back
Channel) (SB CH) a pagina 39.
Stereo/Diretto
Se si seleziona STEREO o DIRECT, si perce-
pirà la fonte solo dai diffusori anteriori sinistri
e destri (ed eventualmente dal subwoofer a
seconda dell’impostazione dei diffusori). Le
fonti multicanali Dolby Digital e DTS vengono
missate su stereo.
In STEREO, l’audio si riproduce secondo l’impo-
stazione della configurazione surround ed è
possibile utilizzare il modo Midnight, il modo
Loudness e le funzioni di controllo dei toni.
Effettuare una delle seguenti scelte per
aggiungere profonditá alla fonte a 2 canali:
Pro Logic II Movie (MOVIE)
Se si seleziona DIRECT, l’audio ignora i
comandi del tono e i livelli del canale per una
più accurata riproduzione di una fonte.
Il presente modo offre un suono surround a
5.1 canali. È indicato per i film, specialmente
quelli registrati in Dolby Surround. La separa-
zione del canale ed il movimento degli effetti
surround è comparabile al Dolby Digital 5.1.
Nota
• Il ricevitore passa automaticamente su
STEREO se si attiva l’ascolto Midnight,
Loudness o comandi dei toni mentre si
trova selezionato DIRECT.
Pro Logic II Music (MUSIC)
Il presente modo offre un suono surround a
5.1 canali ed è idoneo per la musica. L’effetto
surround è più avvolgente rispetto al Pro
Logic II Movie.
Modo Standard
Pro Logic (PROLOGIC)
Il modo Standard può essere utilizzato per
decodificare fonti Dolby Digital, DTS e Dolby
Surround.
Il presente modo offre un suono surround a
4.1 canali. È meno sensibile alla qualità della
fonte, quindi lo si può utilizzare nel caso in cui
i modi Pro Logic II Movie/Music non diano
buoni risultati.
Le altre opzioni di suono surround (colonna
successiva) possono aggiungere dei suoni
multicanali alle fonti stereo normali.
35
It
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Riproduzione delle fonti
Neo:6 Cinema (CINEMA)
Musica avanzata (ADV. MUSIC)
Riproduce l’ambiente acustico di una grande
sala per concerti ed è idoneo per musica o
fonti musicali.
Il presente modo offre un suono surround a
6.1 canali ed è idoneo per film. Il modo Neo:6
Cinema offre una buona separazione dei
canali per le colonne sonore dei film.
Surround TV (TV. SURR.)
Neo:6 Music (MUSIC)
Questa modalità garantisce un suono
surround sia per TV mono e stereo. Utile per
ascoltare vecchi filmati registrati con piste
audio mono.
Il presente modo offre un suono surround a
6.1 canali ed è idoneo per la musica. Il modo
Neo:6 Music riproduce le fonti stereo come
sono dai diffusori anteriori sinistro/destro e
produce un suono surround e centrale natu-
rale e di atmosfera.
Sport (SPORTS)
Studiato per programmi sportivi con molti
eventi, ottimizzati portando le azioni in back-
ground in primo piano.
Modi Advanced Surround
Sono prodotte per venire utilizzate con fonti
audio/visuali del suono surround multicanale
(come DVD e LD). La maggior parte dei modi
Advanced Surround sono prodotti per essere
utilizzati con colonne sonore, ma alcuni modi
sono idonei a fonti musicali. Provare diverse
impostazioni con varie colonne sonore per
scegliere la preferita.
Giochi (GAME)
Utile per divertirsi con i videogiochi. Funziona
particolarmente bene con l'audio, con ottimi
spostamenti da sinistra a destra nell'utilizzo di
software per giochi.
Espansione (EXPANDED)
Il presente modo è prodotto principalmente
per offrire profondità di suono alle fonti stereo
e permette di ascoltare segnali su due canali
(stereo)come se fosse un suono surround
multicanale simulato. Da utilizzare con Dolby
Pro Logic per un effetto surround stereo. È
possibile inoltre utilizzarlo con fonti Dolby
Digital per un campo stereo più ampio
rispetto ai modi STANDARD.
Nota
• In base alla fonte e alla modalità audio
selezionate, potrebbe non ottenersi alcun
suono dai diffusori surround posteriori
nella configurazione. Per maggiori infor-
mazioni al riguardo, fare riferimento a
Utilizzo della modalità virtuale surround
posteriore (Virtual Surround Back) (VSB) a
pagina 40 e Utilizzo del canale surround
posteriore (Surround Back Channel) (SB
CH) a pagina 39.
Stereo a 6 canali (6-STEREO)
È possibile selezionare questo modo per
offrire un suono multicanale ad una fonte
stereo, utilizzando tutti i diffusori della confi-
gurazione.
Film avanzata (ADV. MOVIE)
Riproduce l’ambiente rilassato di una sala
teatrale/cinematografica ed è idoneo per film.
Surround per auricolari (PHONES
SURROUND)
Durante l'uso degli auricolari, garantisce
l'effetto di un suono surround totale.
36
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Riproduzione delle fonti
06
D912 possono decodificare i formati dei
segnali DTS 96kHz/24 bit). Con altri
formati di segnali digitali, situarsi su
ANALOG.
Scelta del segnale di entrata
• Impostazione implicita: AUTO
È necessario collegare un componente alle
entrate analogiche e digitali sulla parte poste-
riore del ricevitore per selezionare tra i segnali
di entrata.
• Si possono verificare disturbi digitali nel
caso in cui venga riprodotto un segnale
analogico da un lettore LD o CD compati-
bile con DTS. Per evitare disturbi, effet-
tuare correttamente i collegamenti
digitali (pagina 17) e situarsi l’entrata del
segnale su DIGITAL.
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
SB CH
MODE
QUICK
SETUP
TONE
MULTI JOG
PHONES SURR.
LISTENING MODE
VIDEO INPUT
PTY
SEARCH
EON
MODE
SETUP
MIC
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
• Alcuni lettori DVD non emettono segnali
DTS. Per ulteriori dettagli, rimettersi al
manuale di istruzioni fornito in dotazione
con il lettore DVD.
•
Premere SIGNAL SELECT (pannello
anteriore) per selezionare il segnale di
entrata corrispondente al componente
della fonte.
Ad ogni pressione, si passa attraverso le
seguenti opzioni:
Ascolto della riproduzione
multicanale
AUTO
RECEIVER
INPUT SELECT
DVD 5.1 ch/
DVD 7.1 ch
DIGITAL
MULTI CONTROL
DVD/LD
TV/SAT
VCR/DVR
TV CONT
CD
CD-R/TAPE
TUNER
ANALOG
STANDARD
L'impostazione AUTO commuta automatica-
mente a DIGITAL, qualora sia stata selezio-
nata una fonte digitale; in caso contrario il
segnale selezionato sarà ANALOG.
DVD 5.1ch (VSX-D712) e DVD 7.1ch (VSX-
D812/D912) saranno visualizzati unicamente
qualora si selezioni DVD/LD.
Quando ci si trova su DIGITAL o AUTO, 2
DIGITAL si illumina se viene emesso un
segnale Dolby Digital, e DTS si illumina se
viene emesso un segnale DTS.
1
Accendere il componente della ripro-
duzione.
2
3
Accendere il ricevitore.
Selezionare la fonte che si desidera
Nota
riprodurre.
Utilizzare i tasti MULTI CONTROL (o INPUT
SELECT).
• Il presente ricevitore può unicamente
riprodurre formati di segnali digitali Dolby
Digital, PCM (32kHz–96kHz) e DTS
(tuttavia, solo i modelli VSX-D812 e VSX-
37
It
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Riproduzione delle fonti
4
Premere STANDARD.
Utilizzo del modo Advanced
Surround
Se la fonte è decodificata con Dolby Digital,
DTS o Dolby Surround, il corretto formato di
decodificazione verrà selezionato automatica-
mente e mostrato sul display.
Se si ascolta una fonte a due canali, ad ogni
pressione si modifica il display come segue:
Se si seleziona una delle opzioni Advanced
Surround, verrà effettuata automaticamente
la decodificazione con Dolby Pro Logic, Dolby
Digital e DTS corrispondente al segnale
emesso. Utilizzare il modo Advanced
Surround per aggiungere effetti al suono
surround.
MOVIE
(2Pro Logic II)
MUSIC
MUSIC
•
Premere ripetutamente ADVANCED
(Neo:6)
(2Pro Logic II)
SURROUND per scorrere tra le seguenti
opzioni.
Ad ogni pressione del tasto, il display cambia
come segue:
CINEMA
PROLOGIC
(Neo:6)
Rimettersi alla pagina 35 per ulteriori infor-
mazioni su ogni modo.
ADV.
MOVIE
ADV.
MUSIC
5
Avviare la riproduzione del compo-
TV SURR.
SPORTS
nente selezionato nel passo 1.
6-STEREO
EXPANDED
GAME
Nota
Rimettersi alla pagina 36 per ulteriori infor-
mazioni su ogni effetto surround.
• La modalità STANDARD non può essere
utilizzata con le fonti stereo 96kHz PCM o
DTS 96kHz/24 bit.
Nota
Utilizzo dei modi Stereo/Diretto
• Premendo ADVANCED SURROUND
quando gli auricolari sono collegati, sarà
automaticamente selezionata la modalità
PHONES SURROUND.
Se si seleziona STEREO o DIRECT, si perce-
pirà la fonte solo dai diffusori anteriori sinistri
e destri (ed eventualmente dal subwoofer a
seconda dell’impostazione dei diffusori). Le
fonti multicanali Dolby Digital e DTS vengono
missate su stereo. Vedere la pagina 35 per
ulteriori informazioni sui presenti modi.
• Le modalità di ascolto Advanced
Surround non possono essere utilizzate
con i formati di segnale 96kHz PCM o DTS
96kHz/24 bit.
•
Premere più volte STEREO/DIRECT per
passare tra le due opzioni.
Suggerimento
Nota
• Gli effetti Advanced Surround possono
essere regolati in una gamma tra 10 e 90
premendo EFFECT +/– . Il livello di effetto
può essere impostato per ciascun modo
Advanced Surround. Il modo Standard
(STANDARD) non può venire modificato.
• Il ricevitore passa automaticamente su
STEREO se si attiva l’ascolto Midnight,
Loudness o comandi dei toni mentre si
trova selezionato DIRECT.
38
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Riproduzione delle fonti
06
•
Premere SB CH MODE (pannello ante-
Utilizzo del canale surround
posteriore (Surround Back
Channel) (SB CH)
riore) ripetutamente per commutare tra le
varie opzioni del canale stesso.
Ad ogni pressione, si passa attraverso le
seguenti opzioni:
• Impostazione implicita: SB ON (VSX-
D812/D912), SB OFF (VSX-D712)
SB ON
SB OFF
É possibile fare in modo che il ricevitore
commuti automaticamente sulla decodifica
Dolby Digital EX o DTS-ES per le fonti codifi-
cate 6.1 (SB AUTO), o, in alternativa, è possi-
bile scegliere di ascoltare altre fonti (ad
esempio, materiale codificato 5.1) con codi-
fica 6.1 (SB ON). Con le fonti codificate 5.1,
sarà generato un canale surround posteriore,
ma il suono potrebbe risultare migliore nel
formato 5.1 per cui è stato originariamente
codificato. In tal caso, è sufficiente disattivare
il canale surround posteriore (SB OFF).
SB AUTO
Nota
• Il canale surround posteriore non può
essere utilizzato qualora Impostazione di
un diffusore surround posteriore a
pagina 45 sia impostata su SB o SB SW
(solo per VSX-D812/D912).
• Con le fonti DTS 96kHz/24 bit non è possi-
bile ascoltare il canale surround poste-
riore.
La tabella indica il momento in cui potrete
ascoltare il canale surround posteriore.
STANDARD
ADVANCED SURROUND
Tutte le modalità
SB CH
Tipo di fonte
PL II MOVIE/
PL II MUSIC/
PRO LOGIC
Decodifica
STANDARD
NEO:6 CINEMA/
NEO:6 MUSIC
MODE
Fonti codificate
ON
multicanale DTS-
ES/Dolby Digital Matrix
con surround 6.1
AUTO
Fonti codificate
multicanale Dolby
Digital/DTS
ON
AUTO
Fonti codificate stereo
Dolby Digital/DTS,
fonti stereo
ON
AUTO
Fonte analogica a 2
canali (stereo)
ON
AUTO
39
It
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Riproduzione delle fonti
Ad ogni pressione, si passa attraverso le
seguenti opzioni:
Utilizzo della modalità
virtuale surround posteriore
(Virtual Surround Back) (VSB)
VSB ON
VSB OFF
Selezionando questa modalità, è possibile
ascoltare un canale virtuale posteriore attra-
verso i diffusori surround. Ad esempio, è
possibile scegliere di ascoltare fonti sprov-
viste di informazioni sui canali surround
posteriori (ad es., materiale codificato 5.1)
con codifica emulata 6.1 (VSB ON). A volte il
suono potrebbe essere migliore nel formato
5.1 per il quale è stato originariamente codifi-
cato. In questo caso, è sufficiente impostare il
ricevitore affinché applichi questo effetto
solamente alle fonti codificate 6.1, quali Dolby
Digital EX o DTS-ES (VSB AUTO). In alterna-
tiva, è possibile disattivarlo(VSB OFF).
VSB AUTO
Nota
• Se Impostazione dei diffusori a pagina 44,
è impostata su S , la modalità virtuale
surround posteriore (Virtual Surround
Back) non può essere utilizzata.
• É possibile utilizzare solamente la moda-
lità virtuale surround posteriore (Virtual
Surround Back) qualora Impostazione di
un diffusore surround posteriore a
pagina 45, è impostata su SB o SB SW
(solo per VSX-D812/D912).
La tabella indica il momento in cui potrete
ascoltare il canale virtuale surround posteriore.
•
Premere SB CH MODE (pannello ante-
• Non è possibile regolare il livello del
canale surround posteriore durante
l'ascolto del canale stesso.
riore) ripetutamente per commutare tra le
varie opzioni del canale virtuale surround
posteriore.
STANDARD
ADVANCED SURROUND
Tutte le modalità
Modalità
virtuale
PL II MOVIE/
PL II MUSIC/
PRO LOGIC
Tipo di fonte
Decodifica
STANDARD
NEO:6 CINEMA/
NEO:6 MUSIC
surround
posteriore
Fonti codificate
ON
multicanale DTS-
ES/Dolby Digital Matrix
con surround 6.1
AUTO
Fonti codificate
multicanale Dolby
Digital/DTS
ON
AUTO
ON
Fonti codificate stereo
Dolby Digital/DTS, fonti
stereo
AUTO
ON
Fonte analogica a 2
canali (stereo)
AUTO
40
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Riproduzione delle fonti
06
1
Premere TONE per selezionare la
Utilizzo del modo di ascolto
frequenza che si desidera regolare.
Ad ogni pressione passa tra BASS e TREBLE.
Midnight e Loudness
La proprietà di ascolto Midnight consente di
ascoltare l’audio surround effettivo dei film a
bassi livelli di volume. L’effetto si regola auto-
maticamente secondo il volume al quale si
sta ascoltando.
La proprietà di ascolto Loudness può venire
utilizzata per ottenere una buona qualità di
suoni bassi e alti da fonti musicali a bassi
livelli di volume.
2
Utilizzare il selettore MULTI JOG per
modificare la quantità di suoni alti o bassi
come richiesto.
Attendere circa cinque secondi per vedersi
automaticamente immesse le modifiche.
Nota
• I comandi di regolazione toni possono
essere utilizzati solamente quando si sele-
ziona STEREO/DIRECT. Utilizzando tali
comandi, DIRECT commuterà su STEREO.
•
Premere MIDNIGHT/LOUDNESS.
Ad ogni pressione passa tra gli effetti come
segue:
MIDNIGHT
Off
• I comandi di regolazione toni hanno
influenza solamente sul SPEAKER A .
Non possono essere utilizzati qualora il
SPEAKER A sia spento.
LOUDNESS
Nota
Riproduzione di altre fonti
• MIDNIGHT/LOUDNESS non può essere
utilizzato qualora si selezioni DVD 5.1 ch/
DVD 7.1 ch, o durante l'ascolto di una
fonte DTS 96kHz/24 bit.
RECEIVER
INPUT SELECT
MULTI CONTROL
DVD/LD
CD
TV/SAT
VCR/DVR
TV CONT
CD-R/TAPE
TUNER
Utilizzo dei comandi dei toni
A seconda di ciò che si sta ascoltando, si
possono regolare i suoni bassi o gli alti utiliz-
zando il comando dei toni del pannello ante-
riore.
MULTI JOG
ENTER
MASTER VOLUME
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
SB CH
MODE
QUICK
SETUP
1
Accendere il componente della ripro-
TONE
DOWN
UP
MULTI JOG
duzione.
VIDEO INPUT
SETUP
MIC
DIGITAL IN
2
3
Accendere il ricevitore.
Selezionare la fonte che si desidera
S-VIDEO
VIDEO
L
AUDIO
R
riprodurre.
Utilizzare i tasti MULTI CONTROL (o INPUT
SELECT).
41
It
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Riproduzione delle fonti
4
Avviare la riproduzione del compo-
Nota
nente nel passo 1.
• Se viene selezionata la riproduzione dalle
entrate multicanali, non è possibile utiliz-
zare i tasti INPUT ATT, TONE e
MIDNIGHT/LOUDNESS, oltre ai modi di
suono STANDARD, ADVANCED
Selezione delle entrate
analogiche multicanali
Se si è collegato un decodificatore o un
lettore DVD con uscite analogiche multica-
nali al presente ricevitore (pagina 19), è
necessario selezionare le entrate analogiche
multicanali per la riproduzione del suono
surround.
SURROUND e STEREO/DIRECT.
• Se viene selezionata la riproduzione dalle
entrate multicanali, è possibile impostare
unicamente i livelli del volume e del
canale.
Utilizzo del timer di
autospegnimento
DVD/LD
TV/SAT
VCR/DVR
TUNER
VIDEO
AUX
CD-R/
TAPE/MD
CD
Il timer di autospegnimento commuta il rice-
vitore in modalità standby dopo un determi-
nato tempo prestabilito. In questo modo
potrete andare tranquillamente a coricarvi
senza timore che il ricevitore rimanga acceso
tutta notte. Impostare il timer di autospegni-
mento dal telecomando.
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
STATION
TUNING
STANDBY
PHONES SURR.
LISTENING MODE
STANDBY/ON
PTY
SEARCH
EON
MODE
TUNER EDIT
CLASS
BAND
MPX
MULTI JOG
PHONES
1
Premere RECEIVER.
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
SB CH
MODE
QUICK
SETUP
TONE
2
Premere SLEEP ripetutamente per
MULTI JOG
PHONES SURR.
LISTENING MODE
VIDEO INPUT
PTY
EON
SEARCH
MODE
impostare il timer di autospegnimento.
SETUP
MIC
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
90 min
Off
60 min
30 min
1
2
Premere DVD/LD.
Premere ripetutamente SIGNAL
SELECT per selezionare DVD 5.1 ch/DVD
7.1 ch.
Suggerimento
Per eliminare la riproduzione dalle entrate
multicanali, utilizzare il tasto SIGNAL SELECT
per selezionare un segnale di entrata.
• É possibile verificare il tempo di autospe-
gnimento residuo premendo una volta
SLEEP. Premendo questo tasto ripetuta-
mente, si commuterà tra le varie opzioni
della funzione di autospegnimento.
• É inoltre possibile disattivare il timer
spegnendo semplicemente il ricevitore.
42
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Configurazione
07
Capitolo 7:
Configurazione
Impostazione dei diffusori (pagina 44)
Specificare il numero e il tipo di diffusori
collegati.
Scelta di configurazione per il
ricevitore
Assicurarsi di completare le seguenti
Impostazione di un diffusore surround
posteriore (pagina 45)
Determinare l’impostazione dei diffusori
surround posteriori/subwoofer surround
posteriori.
operazioni di configurazione per garantire il
miglior suono surround possibile. Questo è di
particolare importanza se si utilizza il DTS e il
Dolby Surround. È necessario effettuare
queste impostazioni una sola volta (a meno
che non si cambi l’ubicazione del sistema dei
diffusori o se ne aggiungano dei nuovi, ecc).
Rimettersi alle pagine successive per ulteriori
dettagli su ciascuna impostazione.
Impostazione del subwoofer
(pagina 45)
Specificare come viene utilizzato il
subwoofer.
Impostazione della frequenza di
crossover (pagina 45)
RECEIVER
Determinare quali frequenze verranno
inviate al subwoofer (o ai diffusori grandi).
RECEIVER
Impostazione attenuatore LFE
(pagina 46)
Specificare il livello dell'attenuatore del
canale LFE.
Impostazione della distanza del
diffusore anteriore sinistro (pagina 46)
Specificare la distanza tra la posizione di
ascolto e il diffusore anteriori sinistro.
ENTER
Impostazione della distanza del
diffusore centrale (pagina 46)
Specificare la distanza tra la posizione di
ascolto e il diffusore centrale.
1
Premere RECEIVERꢀ per accendere
l’apparecchio.
L’indicatore STANDBY si spegne.
2
Premere RECEIVER.
Impostazione della distanza del
diffusore anteriore destro (pagina 47)
Specificare la distanza tra la posizione di
ascolto e il diffusore anteriori destro.
3
Utilizzare ꢃ o ꢄ per scegliere
l’opzione che si desidera regolare.
È più semplice regolare ciascuna
impostazione a turno, seguendo l’ordine in
basso (e sulle pagine successive). Viene
mostrata l’impostazione attuale per ciascuna
opzione mentre si scorre sul display.
Impostazione della distanza del
diffusore surround destro (pagina 47)
Specificare la distanza tra la posizione di
ascolto e il diffusore surround destro.
43
It
Download from Www.Somanuals.com. All Manuals Search And Download.
07
Configurazione
Impostazione della distanza di un
diffusore surround posteriore
(pagina 47)
Determinare la distanza tra la posizione di
ascolto e i diffusori surround posteriori.
5
Ripetere i passi 3 e 4 per impostare
altre opzioni d'impostazione.
6
Una volta terminato, premere ENTER
per uscire.
Impostazione della distanza del
Nota
diffusore surround sinistro (pagina 47)
Specificare la distanza tra la posizione di
ascolto e il diffusore surround sinistro.
• Si esce automaticamente dal display di
impostazione dopo 3 minuti di inattività.
Impostazione della distanza del
subwoofer (pagina 47)
Specificare la distanza tra la posizione
d'ascolto e il subwoofer.
Impostazione dei diffusori
• Impostazione implicita: FL-CS-SS
(qualora, all'accensione del ricevitore, sia
rilevato un subwoofer, l'impostazione
predefinita sarà FS-CS-SS.)
Impostazione del controllo della
gamma dinamica (pagina 48)
Comprimere la gamma dinamica della
traccia sonora.
È necessario comunicare al ricevitore quanti
diffusori sono presenti e le loro dimensioni.
Dalle dimensioni scelte (grandi o piccole)
vengono determinati i suoni bassi inviati dal
ricevitore ai diffusori.
Impostazione dual mono (pagina 48)
Isolare un canale durante l’ascolto di un
disco con codificazione dual mono.
Nel display, F, C, e S si riferiscono
Impostazione di una entrata del canale
surround posteriore (solo per VSX-D812/
D912) (pagina 48)
Specificare il numero di ingressi analogici
surround posteriori collegati.
rispettivamente ai diffusori anteriori, al
centrale e ai surround. Le dimensioni dei
diffusori vengono indicate con L per i diffusori
grandi, S per i piccoli e (asterisco) se non è
collegato nessun diffusore.
Impostazioni dell’entrata digitale
(pagina 48)
Specificare i componenti da assegnare
alle entrate digitali (in basso).
Nota
• Se le dimensioni del cono (diametro) dei
diffusori sono superiori a 15 cm,
impostare le dimensioni dei diffusori su L.
•
Impostazione dell’entrata digitale
coassiale 1
•
Impostazione dell’entrata digitale
• Se non si sta utilizzando un subwoofer, si
consiglia di impostare i diffusori anteriori
su L.
coassiale 2
•
Impostazione dell’entrata digitale
ottica 1
•
Scorrere tra le scelte disponibili ꢀ o ꢁ
•
Impostazione dell’entrata digitale
ottica 2 (solo per VSX-D812/D912)
e scegliere una configurazione che
corrisponda con quella dei diffusori.
4
UseUtilizzare ꢀ o ꢁ per regolare
l’impostazione.
L’impostazione viene immessa automatica-
mente.
44
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Configurazione
07
Una delle seguenti configurazioni dovrebbe
corrispondere con la propria:
Nota
• Per selezionare SB L, nell'Impostazione
dei diffusori, deve essere selezionato SL.
FS-CS-SS
FS-CS-S
FS-C -SS
FS-C -S
FL-CL-SL
FL-CL-SS
FL-CL-S
FL-C -S
FL-C -SS
FL-C -SL
FL-CS-S
FL-CS-SS
Impostazione del subwoofer
È possibile scegliere se utilizzare o meno il
subwoofer. Utilizzare l’impostazione più
(PLUS) per l’aggiunta di bassi.
•
Utilizzare ꢀ o ꢁ per selezionare
subwoofer YES, PLUS o NO.
YES
PLUS
NO
FL-CS-SL
Nota
Impostazione di un diffusore
surround posteriore
• Si imposta e si blocca automaticamente
SW YES, se si sceglie l’impostazione
piccola dei diffusori anteriori.
• Impostazione implicita: S (VSX-D812/
D912), (VSX-D712)
• Se si seleziona l’impostazione PLUS, si
ottengono i suoni bassi dal subwoofer
anche se i diffusori anteriori sono impo-
stati su L.
È necessario informare il ricevitore del colle-
gamento dei diffusori surround posteriori e
delle dimensioni di questi. Dalle dimensioni
scelte (grandi o piccole) vengono determinati
i bassi inviati dal ricevitore ai diffusori. Se è
stato collegato un subwoofer posteriore
surround (VSX-D812/D912), è necessario
selezionare l’impostazione del subwoofer
posteriore surround (SB SW) dalle opzioni.
Impostazione della frequenza di
crossover
• Impostazione implicita: 100 Hz
La frequenza di crossover è il punto in cui il
ricevitore divide i suoni alti e bassi (le
Scegliere (asterisco), se non si trova colle-
gato nessun diffusore.
frequenze) tra i diffusori. Poiché la maggior
parte dei diffusori non possono captare i toni
bassi profondi, è possibile inviare questi
suoni al subwoofer (o se non si possiede un
subwoofer, ai diffusori grandi (L) dell’apparec-
chio) piuttosto che impostare i diffusori su
piccolo (S) nella configurazione. Scegliere il
punto in cui si desidera instradare le
•
Utilizzare ꢀ o ꢁ per selezionare SB S,
SB , SB SW o SB L.
SB S
SB
SB L
SB SW*
frequenze al subwoofer (o ai diffusori L).
* Solo per VSX-D812/D912
45
It
Download from Www.Somanuals.com. All Manuals Search And Download.
07
Configurazione
Si consiglia di impostarlo a 200Hz se i diffu-
sori S hanno dimensioni inferiori a quelle per
scaffali.
•
Usare ꢀ o ꢁ per impostare il livello di
attenuazione (0 dB, 10 dB o
dB(∞)).
0 dB
10 dB
•
Usare ꢀ o ꢁ per specificare la
frequenza di crossover dei diffusori piccoli
(100 Hz, 150 Hz o 200 Hz).
∞
( displays
)
100Hz
150Hz
Nota
• Se si trova selezionato ∞ (
200Hz
appare sul
display), LFE non è disponibile.
100Hz
Inviare le frequenze dei bassi inferiori ai
100 Hz al subwoofer (o ai diffusori L).
Impostazione della distanza del
diffusore anteriore sinistro
• Impostazione implicita: 2 m
150Hz
Inviare le frequenze dei bassi inferiori ai
150 Hz al subwoofer (o ai diffusori L).
Impostare la distanza tra il diffusore anteriori
sinistro e la posizione di ascolto.
200Hz
Inviare le frequenze dei bassi inferiori ai
200 Hz al subwoofer (o ai diffusori L).
•
Utilizzare ꢀo ꢁ per impostare la
distanza tra il diffusore anteriori sinistro e
la posizione di ascolto principale
(compresa tra 0,1 m a 9,0 m).
Nota
• Se tutti i diffusori (anteriori, centrale e
surround) sono impostati su L, non è
possibile impostare la frequenza di cros-
sover in quanto non sono presenti diffu-
Impostazione della distanza del
diffusore centrale
• Impostazione implicita: 2 m
Il diffusore centrale viene situato solitamente
nella parte centrale della sala di ascolto e più
vicino alla posizione di ascolto rispetto ai
diffusori anteriori. Ciò significa che il suono
emesso dal diffusore centrale fuoriesce ante-
riormente dai diffusori anteriori. Per evitare
ciò, configurare le impostazioni della distanza
del diffusore centrale per ritardare il suono
emesso dal diffusore centrale in modo da far
fuoriuscire il suono dai diffusori anteriori e da
quello centrale contemporaneamente.
sori S (
appare sul display).
Impostazione attenuatore di LFE
• Impostazione implicita: 0 dB
Le fonti audio Dolby Digital e DTS compren-
dono toni di suoni bassi ultrabassi. Impostare
l’attenuatore LFE come richiesto per evitare
che i toni dei suoni bassi ultrabassi causino
una distorsione del suono emesso dai diffu-
sori.
•
Utilizzare ꢀ o ꢁ per impostare la
distanza tra il diffusore centrale e la posi-
zione di ascolto principale (compresa tra
0,1 m a 9,0 m).
46
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Configurazione
07
•
Utilizzare ꢀ o ꢁper impostare la
Nota
distanza tra il diffusore surround poste-
riore e la posizione di ascolto principale
(compresa tra 0,1 m a 9,0 m).
• Se si è selezionato C nell’impostazione
dei diffusori, non è possibile impostare la
distanza centrale.
Nota
• Se si è selezionato SB SW ( solo per VSX-
Impostazione della distanza del
diffusore anteriore destro
• Impostazione implicita: 2 m
D812/D912) o SB nell’impostazione dei
diffusori surround, non è possibile impo-
stare la distanza dei diffusori surround
posteriori.
Impostare la distanza tra il diffusore anteriori
destro e la posizione di ascolto.
•
Utilizzare ꢀo ꢁ per impostare la
Impostazione della distanza del
diffusore surround sinistro
• Impostazione implicita: 2 m
distanza tra il diffusore anteriori destro e
la posizione di ascolto principale
(compresa tra 0,1 m a 9,0 m).
É possibile impostare esattamente la distanza
dei diffusori surround per ascoltare i suoni
provenienti da tutti i diffusori contemporane-
amente.
Impostazione della distanza del
diffusore surround destro
• Impostazione implicita: 2 m
•
Utilizzare ꢀ o ꢁ per impostare la
distanza tra il diffusore surround sinistro e
la posizione di ascolto principale
(compresa tra 0,1 m a 9,0 m).
É possibile impostare esattamente la distanza
dei diffusori surround per ascoltare i suoni
provenienti da tutti i diffusori contemporane-
amente.
Nota
•
Utilizzare ꢀ o ꢁ per impostare la
distanza tra il diffusore surround destro e
la posizione di ascolto principale
(compresa tra 0,1 m a 9,0 m).
• Se si è selezionato S nell’impostazione
dei diffusori, non è possibile impostare la
distanza dei diffusori surround.
Nota
Impostazione della distanza del
subwoofer
• Se si è selezionato S nell’impostazione
dei diffusori, non è possibile impostare la
distanza dei diffusori surround.
• Impostazione implicita: 2 m
Come per i diffusori, impostare accurata-
mente la distanza tra i subwoofer in modo tale
da udire I suoni da tutti i diffusori contempo-
raneamente.
Impostazione della distanza di un
diffusore surround posteriore
• Impostazione implicita: 2 m
•
Utilizzare ꢀ o ꢁper impostare la
distanza tra il subwoofer e la posizione di
ascolto principale (compresa tra 0,1 m a
9,0 m).
É possibile impostare esattamente la distanza
dei diffusori surround posteriore per ascol-
tare i suoni provenienti da tutti i diffusori
contemporaneamente.
47
It
Download from Www.Somanuals.com. All Manuals Search And Download.
07
Configurazione
Qualora sia stata attivato il modo Dolby
Digital, Si ascolterà il canale selezionato (ch1
o ch2) dal diffusore centrale. Quando il modo
Dolby Digital è disattivato, o se non si
possiede un diffusore centrale, si ascolterà il
canale selezionato dai diffusori anteriori. both
front speakers. Nell’impostazione L ch 1. R ch
2, il diffusore anteriore sinistro emetterà dal
canale 1 e il diffusore anteriore destro dal
canale 2.
Nota
• Qualora, nell'ambito delle impostazioni
del subwoofer, è selezionato SW NO,
l'impostazione del subwoofer non potrà
essere regolata.
Impostazione del controllo della
gamma dinamica
• Impostazione implicita: OFF
•
Utilizzare ꢀ o ꢁ per scorrere tra le
La gamma dinamica è la differenza tra i suoni
più alti e i più bassi di ciascun segnale dato.
Con questa impostazione è possibile compri-
mere la gamma dinamica in modo da poter
ascoltare più facilmente i suoni di livello
basso (risuonare relativamente più alti), però
i suoni più alti non saranno così potenti.
possibili impostazioni dual mono.
Lch 1.R ch2
ch2
ch1
Impostazione di una entrata del
canale surround posteriore
(solo per VSX-D812/D912)
•
Utilizzare ꢀ o ꢁ per impostare il
controllo della gamma dinamica (OFF,
MAX o MID).
• Impostazione implicita: SB 2ch IN
Si deve eseguire questa impostazione solo se
si sta utilizzando un componente separato
per decodificare DVD e questo componente
posiede solo una uscita del canale surround
posteriore. In questo caso, selezionare SB 1ch
IN, altrimenti lasciarlo nell’impostazione SB
2ch IN.
Nota
• Se si ascolta a basso volume, impostare
MAX per la compressione massima di
una gamma dinamica.
• Il controllo della gamma dinamica è effi-
cace solo nel caso in cui si riproduca un
segnale Dolby Digital o DTS.
•
Utilizzare ꢀ o ꢁ per selezionare SB
2ch IN or SB 1ch IN.
Impostazione dual mono
• Impostazione implicita: ch1
Impostazioni dell’entrata digitale
Con queste impostazioni si specifica al ricevi-
tore quale componente è stato collegato alle
prese coassiali DIGITAL IN sulla parte poste-
riore del ricevitore.
Dopo aver assegnato il componente a questa
presa digitale, ogni volta che si seleziona quel
componente (ad esempio un lettore DVD), il
ricevitore passa automaticamente all’impo-
stazione dell’entrata digitale ed appare
DIGITAL sul display.
L'impostazione dual mono si può usare solo
quando si ascoltano dischi Dolby Digital e
segnali DTS con dual mono codificato.
L'utilizzo di questi dischi è utile qualora sia
necessario avere una lingua su un canale ed
un'altra lingua sull'altro. Con questa
impostazione è possibile scegliere quale
canale nell’impostazione dual mono si
desidera ascoltare.
48
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Configurazione
07
Digitale coassiale 1:
• Impostazione implicita: DVD
Regolazione manuale
dell'area d'ascolto (MCACC)
•
Utilizzare ꢀ o ꢁ per assegnare
É possibile utilizzare il sistema di regolazione
acustica multicanale (Multi-Channel Acou-
stic Calibration (MCACC)) per regolare accu-
ratamente i livelli dei diffusori e il tempo dei
canali. Tale regolazione viene effettuata in
base alla distanza dal diffusore anteriore sini-
stro alla posizione d'ascolto. Udirete una serie
di toni di prova che vi permetteranno di impo-
stare i livelli dei diffusori e il tempo dei canali,
in base alle vostre esigenze. Il vantaggio
consiste nel poter ottenere un bilanciamento
totale definito dai diffusori anteriori (I diffusori
principali per home theater).
l’entrata digitale coassiale 1 (DVD, TV, CD,
CDR, VCR o OFF).
Digitale coassiale 2:
• Impostazione implicita: CD
•
Utilizzare ꢀ o ꢁ per assegnare
l’entrata digitale coassiale 2 (DVD, TV, CD,
CDR, VCR o OFF).
Digitale ottica 1:
• Impostazione implicita: TV
•
Utilizzare ꢀ o ꢁ per assegnare
l’entrata digitale ottica 1 (DVD, TV, CD,
CDR, VCR o OFF).
Importante
• Prima di utilizzare l'impostazione MCACC,
completare I’Impostazione dei diffusori a
pagina 44.
Digitale ottica 2:
(solo per VSX-D812/D912)
• Impostazione implicita: CDR
•
Utilizzare ꢀ o ꢁ per assegnare
l’entrata digitale ottica 2 (DVD, TV, CD,
CDR, VCR o OFF).
RECEIVER
Nota
• Non è possibile assegnare due ingressi
alla stessa funzione. Ad esempio, asse-
gnando l'ingresso 1 all'impostazione
predefinita dell'ingresso 2, l'ingresso 2
commuterà automaticamente su OFF.
ENTER
MCACC
SETUP
Attenzione
• Questi toni di prova possono essere forti.
Verificare che non vi siano persone
nell'area che potrebbero spaventarsi.
49
It
Download from Www.Somanuals.com. All Manuals Search And Download.
07
Configurazione
1
2
Premere RECEIVER.
Premere MCACC SETUP.
Il sistema MCACC utilizza il diffusore ante-
riore sinistro come punto di riferimento per
regolare il livello del diffusore e il tempo del
canale.
Il tono del diffusore anteriore sinistro e del
diffusore di destinazione (quello che si sta
regolando) suoneranno in sequenza, in modo
tale possiate decidere quale dovrà essere può
intenso.
Il tono di prova per il tempo dei canali è emesso
nello stesso ordine riportato al punto 5:
R
C
LS
3
Utilizzare i tasti ꢀ e ꢁ per regolare in
RS
SW
SB
successione il livello di ogni canale,
premendo ENTER al termine di ogni rego-
lazione per passare al canale successivo.
Il segnale di prova viene emesso nell’ordine
seguente (a seconda dell’impostazione dei
diffusori):
Dopo aver completato l'impostazione di tutti i
canali, il livello del volume ritornerà normale e
sul display sarà visualizzato COMPLETE,
quindi RESUME.
R
C
LS
Nota
• L'utilizzo del sistema MCACC per impo-
stare il sistema di diffusori, sovrascriverà
qualsiasi precedente impostazione per le
modalità STANDARD o ADVANCED
SURROUND.
RS
SW
SB
4
Precisare la distanza dall'altoparlante
anteriore di sinistra alla posizione di
ascolto utilizzando i tasti ꢀ e ꢁ, quindi
premere il tasto ENTER.
5
Utilizzare ꢀ e ꢁ per regolare il tempo
di ogni canale in sequenza, premendo
ENTER per passare al successivo canale.
Ascoltare il canale di riferimento ed utilizzarlo
per misurare il canale di destinazione. Posi-
zionarsi di fronte ai due diffusori, tenendo le
braccia distese rivolte verso ogni diffusore.
Tentare di ottenere due toni come se prove-
nissero contemporaneamente in una posi-
zione più o meno di fronte a voi e tra la
distanza delle braccia.
50
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Configurazione
07
surround posteriore a pagina 45 per assi-
curarsi di aver determinato correttamente
l’impostazione dei diffusori.
Impostazione dei livelli
separati dei canali per le
modalità d'ascolto
3
Premere MASTER VOLUME +/– per
• Impostazione implicita: 0 dB
regolare il volume ad un livello appro-
priato.
Oltre all'impostazione MCACC, è possibile
impostare i relativi livelli dei canali dalla posi-
zione d'ascolto, utilizzando il metodo qui di
seguito indicato. Utilizzando CH SELECT (vedi
suggerimento qui di seguito), è anche possi-
bile impostare i livelli separati dei canali per
ogni modalità d'ascolto.
4
Utilizzare LEVEL +/– per regolare i
livelli dei diffusori a turno.
Si dovrebbe percepire il segnale di prova allo
stesso volume in ogni diffusore una volta
seduti nella posizione di ascolto principale. La
gamma del livello di canale è 10 dB.
5
Una volta terminato, premere TEST
TONE per disattivare il segnale di prova.
Il ricevitore ritorna in modalità Standard.
ADVANCED
STANDARD SURROUND
Suggerimento
TEST
TONE
CH
SELECT
LEVEL
• Il volume dei diffusori può essere regolato
anche senza l’emissione del segnale di
prova, premendo CH SELECT, quindi
utilizzando LEVEL +/–. É tuttavia possibile
regolare solamente il livello dei diffusori
attivi nella modalità d'ascolto. É possibile
impostare dei livelli separati per le moda-
lità STANDARD, STEREO e DVD 5.1 ch/
DVD 7.1 ch, nonché per ogni modalità
ADVANCED SURROUND.
MASTER
VOLUME
1
Premere STANDARD o ADVANCED
SURROUND.
2
Premere TEST TONE per emettere il
Nota
segnale di prova.
• Il segnale di prova viene emesso unica-
mente nei modi STANDARD o
ADVANCED SURROUND.
Il segnale di prova viene emesso nell’ordine
seguente (a seconda dell’impostazione dei
diffusori):
• Poiché il subwoofer trasmette frequenze
ultrabasse, il suono potrebbe sembrare
più basso di quanto non sia in realtà.
L
C
R
RS
• Utilizzando i toni di prova per impostare il
sistema di diffusori, tutte le impostazioni
precedenti inerenti alle modalità STAN-
DARD o ADVANCED SURROUND
saranno sovrascritte.
SW
LS
SB
• Se non si percepisce nessun segnale di
prova da uno dei diffusori, si prega di
rimettersi a Impostazione dei diffusori a
pagina 44 e Impostazione di un diffusore
51
It
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Utilizzo del sintonizzatore
Capitolo 8:
Utilizzo del sintonizzatore
3
Sintonizzare su una stazione.
Per ascoltare la radio
VI sono tre modi di effettuarlo:
La procedura seguente mostra come sintoniz-
zarsi sulle trasmissioni FM e AM utilizzando le
funzioni di sintonizzazione automatica
Sintonizzazione automatica
Per cercare stazioni nella banda attual-
mente selezionata, premere e tenere
premuto i tasti TUNE +/– per circa un
secondo. Il ricevitore avvia la ricerca della
stazione successiva, interrompendo la
ricerca quando ne trova una. Ripetere
questa operazione per cercare altre stazioni.
(ricerca) e manuale (graduale). Se si conosce
di già la frequenza della stazione desiderata,
vedere il paragrafo Sintonizzare direttamente
su una stazione, qui di seguito riportato. Una
volta sintonizzati su una stazione, è possibile
memorizzare la frequenza da richiamare in
seguito–vedere Per memorizzare le stazioni
preselezionate a pagina 53 per ulteriori infor-
mazioni al riguardo.
Sintonizzazione manuale
Per cambiare la frequenza un passo alla
volta, premere TUNE +/–.
Sintonizzazione rapida
Premere e tenere premuti TUNE +/– per
una sintonizzazione rapida. Rilasciare il
tasto sulla frequenza desiderata.
TUNER
Per migliorare l’audio stereo FM
Se gli indicatori TUNED o STEREO non si illu-
minano durante la sintonizzazione di una
stazione FM perché il segnale è debole,
premere il tasto MPX per portare il ricevitore al
modo di ricezione monoaurale. Così si dovrebbe
migliorare la qualità del suono e permettere di
sfruttare al meglio la trasmissione.
MASTER
VOLUME
TUNE
TUNE
BAND
RF ATT
MPX
Utilizzo dell’attenuatore RF
Se il segnale radio è troppo forte e/o il suono
risulta distorto, premere il tasto RF ATT per
attenuare (abbassare) l’entrata del segnale
radio e ridurre la distorsione (solo per stazioni
FM).
1
Premere il tasto TUNER per selezionare
il sintonizzatore.
2
Utilizzare il tasto BAND per modificare
la banda (FM o AM), se necessario.
Ad ogni pressione si passa dalla banda FM
alla banda AM.
52
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Utilizzo del sintonizzatore
08
Sintonizzare direttamente su una
stazione
MULTI JOG
A volte si conosce già la frequenza della
stazione che si desidera ascoltare. In questo
caso si può semplicemente digitare la
frequenza direttamente mediante i tasti
numerici sul telecomando.
ENTER
MASTER VOLUME
/
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
SB CH
MODE
QUICK
SETUP
TONE
DOWN
UP
MULTI JOG
VIDEO INPUT
SETUP
MIC
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
1
Premere il tasto TUNER per selezionare
il sintonizzatore.
2
Utilizzare il tasto BAND per modificare
la banda (FM o AM), se necessario.
Ad ogni pressione si passa dalla banda FM
alla banda AM.
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGH
LOUDNES
TUNING
STATION
PHONES SURR.
LISTENING MODE
PTY
SEARCH
EON
MODE
TUNER EDIT
CLASS
BAND
MPX
3
Premere D.ACCESS (Accesso diretto).
MULTI JOG
SETUP
MIC
DIGITAL IN
4
Utilizzare i tasti numerici per digitare
la frequenza della stazione radio.
Per esempio, premere 1, 0, 6, 0, 0 per
sintonizzare i 106.00 (FM).
STEREO TUNED
SP
A
FM
106.00
TUNER
Se si verifica un errore durante l’oprazione,
premere per due volte D.ACCESS per
eliminare la frequenza e iniziare nuovamente.
MASTER
VOLUME
TUNE
INPUT ATT
T.EDIT
ST
ST
Per memorizzare le stazioni
preselezionate
ENTER
TUNE
BAND
Se si ascolta spesso una stazione radio,
conviene che il ricevitore memorizzi la
frequenza per poterla poi richiamare
MPX
CLASS
facilmente ogni volta che si desideri ascoltare
quella stazione. Questa funzione consente di
sintonizzarla manualmente ogni volta. Questo
apparecchio può preselezionare fino ad un
massimo di 30 stazioni, memorizzate in tre
gruppi o categorie (A, B e C) di 10 stazioni
ciascuna. Quando si preselezionano le
frequenze FM, viene memorizzata anche
l’impostazione MPX (vedere pagina 52).
Usare i comandi del pannello anteriore per
memorizzare le stazioni preselezionate.
1
Sintonizzarsi su una stazione che si
desidera memorizzare.
Vedere Per ascoltare la radio a pagina 52 per
ulteriori informazioni al riguardo.
53
It
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Utilizzo del sintonizzatore
2
Premere T.EDIT (TUNER EDIT).
• Premere ENTER per confermare
l’impostazione. Se non viene digitato
alcun carattere, si introduce uno spazio.
Sul display appare ST. MEMORY, quindi
lampeggia una categoria della memoria.
• Si memorizza il nome se si preme ENTER
dopo aver scelto il quarto carattere.
STEREO TUNED
A
SP
A -
99.50
Suggerimento
3
Premere CLASS per selezionare una
• Per cancellare il nome di una stazione,
ripetere semplicemente i passi 1–3 ed
inserire quattro spazi in sostituzione del
nome.
delle tre categorie, quindi premere ST +/–
(STATION +/–) per selezionare la stazione
preselezionata desiderata.
È possibile inoltre utilizzare il selettore MULTI
JOG (pannello anteriore) per selezionare una
stazione preselezionata.
• Dopo aver assegnato un nome ad una
stazione preimpostata, è possibile
premere DISPLAY durante l‘ascolto di
una qualsiasi stazione per commutare tra
la visualizzazione del nome e quella della
frequenza.
4
Premere ENTER.
Dopo aver premuto ENTER, la categoria ed il
numero preselezionati terminano di
lampeggiare ed il ricevitore memorizza la
stazione.
Per assegnare un nome alle stazioni
preselezionate
Per una più semplice identificazione, è
possibile assegnare un nome alle stazioni
preselezionate.
1
Scegliere la stazione preselezionata
cui si desidera assegnare un nome.
Per maggiori informazioni, fare riferimento al
paragrafo Per ascoltare le stazioni preselezi-
onate qui di seguito riportato.
2
Premere T.EDIT (TUNER EDIT).
Sul display appare ST. NAME, quindi
lampeggia un cursore sulla prima posizione
del carattere.
3
Inserire il nome desiderato.
I nomi devono avere una lunghezza massima
di quattro caratteri.
• Utilizzare il selettore MULTI JOG
(pannello anteriore) o i tasti ST +/–
(telecomando) per selezionare i caratteri.
54
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Utilizzo del sintonizzatore
08
bile cercare una stazione che sta mandando
in onda una trasmissione con il tipo di
programma JAZZ. Vi sono circa 30 tipi di
programmi, comprendenti vari generi musi-
cali, notiziari, sport, talk show, informazioni
finanziarie e così via.
Per ascoltare le stazioni
preselezionate
Per procedere in questo senso, è necessario
che alcune preimpostazioni siano state
memorizzate. Qualora tale operazione non sia
stata effettuata, fare riferimento al paragrafo
Per memorizzare le stazioni preselezionate a
pagina 53.
Il ricevitore consente di visualizzare tre tipi
differenti di informazioni RDS: Testo radio,
No-me di servizio programma e Tipo di
programma.
1
Premere TUNER per selezionare il
sintonizzatore.
Il Testo radio (RT) è costituito da messaggi
inviati dalla stazione radio. Questi messaggi
possono essere di qualsiasi tipo—ad esempio
una stazione radio può diffondere il suo
numero di telefono come testo radio RT.
2
Premere CLASS per selezionare la
categoria in cui è memorizzata la stazione.
Premere ripetutamente per scorrere tra le
categorie A, B e C.
Il Nome di servizio programma (PS) è il nome
della stazione radio.
3
Premere ST +/– (STATION +/–) per sele-
zionare la stazione preselezionata deside-
rata.
Il Tipo di programma (PTY) indica il tipo di
programma trasmesso attualmente.
Il ricevitore può cercare e visualizzare i
seguenti tipi di programmi:
Nota
NEWS – Notiziari
• Se si lascia il ricevitore scollegato dalla
presa di corrente alternata per un lungo
periodo, lestazionipreselezionateandranno
perdute e sarà necessario riprogrammarle.
AFFAIRS – Attualità
INFO – Informazioni generali
SPORT – Sport
EDUCATE – Programmi educativi
DRAMA – Commedie o serial radiofonici
Introduzione al sistema RDS
Il sistema dati radio, o RDS come è general-
mente noto, è un sistema utilizzato dalle
stazioni radio FM per fornire agli ascoltatori
vari tipi di informazioni—come ad esempio il
nome della stazione ed il tipo di programma
trasmesso. Queste informazioni vengono
visualizzate sotto forma di testo sul display ed
è possibile scorrere tra i tipi di informazioni.
Sebbene non tutte le stazioni radio FM forni-
scano informazioni RDS, la maggior parte di
esse offre questo servizio.
CULTURE – Programmi di cultura
nazionale o regionale, spettacoli teatrali,
ecc.
SCIENCE – Scienze e tecnologia
VARIED – Programmi basati di solito su
conversazioni, come quiz e interviste
POP M – Musica pop
ROCK M – Musica rock
EASY M – Musica "Middle of the road",
denominata anche soft rock
La funzione più utile del sistema RDS è proba-
bilmente la possibilità di eseguire la ricerca
automatica del tipo di programma. Pertanto,
se si desidera ascoltare musica jazz, è possi-
LIGHT M – Musica classica leggera
CLASSICS – Musica classica seria
55
It
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Utilizzo del sintonizzatore
OTHER M – Musica di altro genere non
appartenente alle categorie precedenti
•
Premere DISPLAY per selezionare la
schermata delle informazioni RDS.
Ad ogni pressione si modifica il display come
segue:
WEATHER – Bollettini meteorologici
FINANCE – Report sul mercato azionario,
commercio, trading, ecc.
• RT – Display Radio Text
• PS – Display Program Service
• PTY – Display tipo di programma
• Frequenza attuale del sintonizzatore
CHILDREN – Programmi per bambini
SOCIAL – Programmi di interesse sociale
RELIGION – Programmi a carattere
religioso
Nota
PHONE IN – Opinioni espresse dal
pubblico via telefono
• Alcuni caratteri potrebbero non venire
visualizzati correttamente, se si verifica
qualche disturbo durante la visualizza-
zione dello scorrimento RT.
TRAVEL – Viaggi vacanza o annunci sul
traffico
LEISURE – Attività ricreative e hobby
JAZZ – Jazz
• Se appare NO RADIO TEXT DATA nel
display RT, significa che non viene
trasmesso alcun dato RT dalla stazione.
Qualora sia stato immesso un nome per
la stazione, questo viene visualizzato in
sostituzione del dato RT. Altrimenti, il
display passa automaticamente alla
visualizzazione dei dati PS. Se non viene
trasmesso alcun dato PS dalla stazione,
verrà visualizzata la frequenza.
COUNTRY – Musica country
NATION M – Musica popolare in lingue
diverse dall’inglese
OLDIES – Musica popolare degli anni ‘50
e ‘60
FOLK M – Musica folk
DOCUMENT – Documentari
In aggiunta, sono previsti altri due tipi di
programmi, ALARM e NO DATA. ALARM è
utilizzato per annunci d'emergenza. Non è
possibile cercare questo programma, ma il
sintonizzatore passa automaticamente a
questo segnale di trasmissione RDS. Qualora
non si riesca a trovare un determinato tipo di
programma, sul display sarà visualizzato NO
DATA.
• Nel display PTY vi sono dei casi in cui
appare NO DATA. Se ciò dovesse acca-
dere, appare il display PS dopo un paio di
secondi.
• Il presente apparecchio converte i
caratteri minuscoli trasmessi dalle
stazioni radio in maiuscoli.
• Qualora le condizioni di ricezione siano
forti, ma i dati RDS siano visualizzati in
modo inadeguato, premere RF ATT.
Visualizzazione delle informazioni
RDS
Utilizzare il pulsante DISPLAY per visualizzare
i diversi tipi di informazioni RDS disponibili
(RT, PS e PTY).
56
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Utilizzo del sintonizzatore
08
5
Se si desidera continuare ad ascoltare
Ricerca di programmi RDS
Una delle funzioni più utili dell’RDS è la capa-
cità di cercare un particolare tipo di programma
radio. È possibile cercare uno qualsiasi dei tipi
di programmi elencati alla pagina prece-
dente.
una stazione, premere ENTER entro 5
secondi.
Se non si preme ENTER, si riavvia la ricerca.
Se non viene visualizzato NO PTY, significa
che il sintonizzatore non è in grado di trovare
quel tipo di programma durante la ricerca.
ADVANCED
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
TUNING
STATION
STANDARD SURROUND
PHONES SURR.
LISTENING MODE
Nota
PTY
SEARCH
EON
MODE
TUNER EDIT
CLASS
BAND
MPX
MULTI JOG
SETUP
MIC
DIGITAL IN
• La funzione RDS ricerca unicamente
stazioni preselezionate. Se non è stata
preselezionata alcuna ricerca, o qualora
non si riesca a trovare il tipo di
programma le preimpostazioni delle
stazioni, sarà visualizzato NO PTY.
FINISH significa che la ricerca è comple-
tata.
MULTI JOG
ENTER
MASTER VOLUME
/
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
SB CH
MODE
QUICK
SETUP
TONE
DOWN
UP
MULTI JOG
VIDEO INPUT
Introduzione della funzione
EON
SETUP
MIC
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
Se si attiva la funzione EON (Informazioni
sull’Enhanced Other Network), il ricevitore
passa ad una trasmissione collegata all’EON
quando questa inizia, anche se la funzione di
un ricevitore, che non sia un sintonizzatore, si
trova in uso. Non si può utilizzare in zone in
cui le informazioni EON non sono trasmesse
e quando le stazioni radio FM non trasmet-
tono dati PTY. Al termine della trasmissione, il
sintonizzatore torna alla frequenza o alla
funzione originale.
1
Premere il tasto BAND per selezionare
la banda FM.
É possibile attivare la modalità RDS
solamente nella banda FM.
2
Premere il tasto PTY SEARCH.
Appare SEARCH sul display.
3
Utilizzare il selettore MULTI JOG per
selezionare il tipo di programma che si
desidera ascoltare.
4
Premere ENTER per cercare il tipo di
programma.
Il sintonizzatore avvia la ricerca delle stazioni
preselezionate corrispondenti. Quando ne
trova una, si interrompe la ricerca e si
riproduce la stazione per cinque secondi.
57
It
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Utilizzo del sintonizzatore
• La indicatore lampeggia ad indicazione
che in quel momento la stazione
Utilizzo del sistema EON
sintonizzata trasmette il notiziario EON.
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS
TUNING
STATION
PHONES SURR.
LISTENING MODE
• Durante la funzione di ricerca EON, non è
possibile commutare a una funzione
diversa (ad esempio, DVD/LD).
PTY
SEARCH
EON
MODE
TUNER EDIT
CLASS
BAND
MPX
MULTI JOG
SETUP
MIC
DIGITAL IN
Per cancellare la ricerca RDS ed EON
da tutte le stazioni
1
Premere il tasto BAND per selezionare
la banda FM.
É possibile attivare la modalità EON
solamente nella banda FM.
Il ricevitore registrerà automaticamente un
codice di identificazione (chiamato codice PI)
per ogni stazione immessa nelle categorie
della memoria che permettono la ricezione di
dati RDS ed EON. Se si desidera rimuovere le
stazioni attualmente selezionate dalle
funzioni di ricerca RDS ed EON, è necessario
cancellare i codici PI.
2
Premere EON MODE per selezionare
una delle modalità ammesse.
Premere ripetutamente il pulsante per
commutare tra:
• TA (Bollettini sul traffico) – Questo modo
fa sì che il sintonizzatore riceva un
bollettino sul traffico quando questo viene
trasmesso.
1
Premere e tenere premuto EON MODE
per circa 2 secondi.
Apparirà ERASE PI sul display.
• NEWS – Questo modo fa sì che il sintoniz-
zatore riceva un notiziario quando questo
viene trasmesso.
2
Premere ENTER.
ERASE PI lampeggia per due secondi ad
indicare che i codici PI sono stati cancellati.
• OFF – Disattiva la funzione EON.
Quando impostata su TA o NEWS, la
indicatore EON sul display s'illumina. Na
indicatore EON lampeggia quando il
ricevitore commuta automaticamente in
radiotrasmissione EON.
Nota
• La funzione EON non funziona durante
l'ascolto in AM.
• Non è possibile cercare contemporanea-
mente bollettini del traffico e notiziari.
• Non è possibile mettere in funzione i
T.EDIT e SEARCH, quando è acceso
l’indicatore EON.
58
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Per eseguire una registrazione
09
CPaepitroloe9s: eguire una registrazione
1
Selezionare la fonte che si desidera
Per eseguire una
registrazione audio o video
registrare.
Utilizzare i tasti MULTI CONTROL (o INPUT
È possibile eseguire una registrazione audio o
video dal sintonizzatore incorporato o da una
fonte audio o video collegata al ricevitore
(come un lettore CD o un televisore).
Ricordarsi che non è possibile eseguire regi-
strazioni digitali da una fonte analogica e vice-
versa, assicurarsi quindi che i componenti su/
da cui si sta registrando sono collegati nella
stessa maniera (vedere Collegamento a
pagina 16 per ulteriori informazioni sui colle-
gamenti).
SELECT).
2
Selezionare il segnale di entrata (se
necessario).
Premere SIGNAL SELECT (pannello
anteriore) per selezionare il segnale di entrata
corrispondente al componente della fonte
(vedere alla pagina 37 per ulteriori
informazioni al riguardo).
3
Selezionare la fonte che si desidera
riprodurre.
Se si desidera registrare una fonte video, è
necessario utilizzare lo stesso tipo di collega-
menti per la fonte e per il registratore. Per
esempio, non è possibile registrare un compo-
nente collegato alle prese S-video con un regi-
stratore collegato alle uscite del video (vedere
a pagina 20 per ulteriori informazioni sui colle-
gamenti video).
Sintonizzare la stazione radio, inserire il CD, il
video, il DVD, ecc.
4
Preparare il registratore.
Inserire un nastro, un MD, un video, ecc.
vergine nel dispositivo di registrazione ed
impostare i livelli di registrazione.
Rimettersi alle istruzioni fornite con il regi-
stratore se non si è sicuri delle impostazioni.
La maggior parte dei videoregistratori impo-
stano automaticamente i livelli di registra-
zione audio—se non si è sicuri, controllare il
manuale di istruzioni del componente.
INPUT SELECT
DVD/LD
TV/SAT
VCR/DVR
TUNER
VIDEO
AUX
MULTI CONTROL
CD-R/
TAPE/MD
CD
DVD/LD
CD
TV/SAT
VCR/DVR
TV CONT
STATION
STANDBY
CD-R/TAPE
TUNER
STANDBY/ON
5
Avviare la registrazione, quindi
TUNER EDIT
CLASS
MULTI JOG
avviare la riproduzione del componente
della fonte.
PHONES
Nota
ADVANCED
STANDARD SURROUND
STEREO/
DIRECT
SIGNAL
SELECT
MIDNIGHT/
LOUDNESS SPEAKERS
SB CH
MODE
QUICK
SETUP
• Il volume, il bilanciamento, i toni (bassi,
alti e acuti) e gli effetti surround del
ricevitore non incidono sul segnale
registrato.
TONE
MULTI JOG
PHONES SURR.
LISTENING MODE
VIDEO INPUT
PTY
SEARCH
EON
MODE
SETUP
MIC
DIGITAL IN
S-VIDEO
VIDEO
L
AUDIO
R
59
It
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Controllo del resto del sistema
Capitolo 10:
Controllo del resto del sistema
Impostare il telecomando per
controllare altri componenti
Per selezionare direttamente
dei codici di preselezione
Esistono vari modi di impostare il
telecomando per controllare altri componenti
dell’apparec-chio. La maniera più semplice di
effettuare questa operazione è di richiamare il
codice di preselezione del produttore del
componente (inizio da pagina 67) su uno dei
tasti MULTI CONTROL del telecomando.
MULTI CONTROL
DVD/LD
CD
TV/SAT
VCR/DVR
TV CONT
RECEIVER
CD-R/TAPE
TUNER
Si possono impostare i tasti per controllare i
seguenti componenti:
MASTER
VOLUME
Tasto
Componenti controllabili
TUNE
ST
ST
Lettore DVD o LD
Sintonizzatore TV o per
trasmissioni via satellite
ENTER
DVD/LD:
TV/SAT:
TUNE
Videoregistratore o
VCR/DVR:
videoregistratore digitale
CD:
Lettore CD
CD-R/TAPE:
Registratore CD, piatto a
cassette o lettore MD
TV CONT:
TUNER:
Sintonizzatore TV o cavo TV
Sintonizzatore FM/AM
Se non è possibile trovare un codice di
preselezione corrispondente al componente
che si desidera controllare, si possono dare
istruzioni al telecomando per utilizzare
comandi individuali di un altro telecomando
(pagina 61).
1
Premendo il pulsante RECEIVER,
premere e tenere premuto il pulsante 1.
Il LED lampeggia.
2
Premere il tasto MULTI CONTROL per il
componente che si desidera controllare.
Il LED si illumina.
Nota
3
Utilizzando i tasti numerici, immettere
• Dopo 1 minuto d'inattività, il telecomando
uscirà dall'operazione in atto.
il codice preselezionato.
I codici preselezionati sono riportati a pagina 67
(VSX-D712) e a pagina 68 (VSX-D812/D912).
Dopo aver immesso il codice, il LED
lampeggerà nuovamente.
60
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Controllo del resto del sistema
10
Qualora sia stato immesso il codice esatto,
l'alimentazione del componente interessato
sarà attivata o disattivata.
1
Premendo il pulsante RECEIVER,
premere e tenere premuto il pulsante 2.
Il LED lampeggia.
Tale alimentazione sarà attivata o disattivata
solamente qualora il componente possa
essere attivato direttamente dal telecomando.
2
Premere il tasto MULTI CONTROL per il
componente che si desidera controllare.
Il LED si illumina.
• É possibile immettere solamente un
codice per il tipo di componente scritto su
ogni tasto MULTI CONTROL (ad
• Per uscire o cancellare, premere
RECEIVER.
3
Puntare i telecomandi l’uno verso
eccezione di RECEIVER e TUNER).
l’altro ad una distanza di 2-5 cm, quindi
premere il tasto da programmare sul
telecomando del presente ricevitore.
Il LED lampeggia rapidamente.
• Anche qualora non s'immetta un codice
preimpostato per il televisore (tasto TV/
SAT MULTI CONTROL), sarà possibile
azionare il televisore utilizzando il tasto TV
CONTROL sul telecomando, qualora tale
tasto sia stato assegnato al tasto TV CONT.
2 – 5 cm
• Potrebbe non essere possibile utilizzare
un particolare codice, anche qualora sia
elencato a pagina 67.
4
Premere il tasto corrispondente
sull’altro telecomando che sta inviando
(dando istruzioni) il segnale al
• I pulsanti del telecomando non
funzioneranno con altre apparecchiature
che non siano preselezionate utilizzando
il metodo sopra esposto.
telecomando del presente ricevitore.
Se l'operazione è stata programmata con
successo, il LED su telecomando del
ricevitore lampeggerà una volta, quindi
rimarrà illuminato a luce fissa.
4
Ripetere le fasi da 2 a 3 per provare un
altro codice o per immettere un codice per
un altro componente da azionare.
Se per qualche motivo l’operazione non è
stata programmata, il LED lampeggerà per tre
secondi, quindi si illuminerà di continuo. Se
ciò accade, continuare a premere il tasto
(delle istruzioni) variando la distanza tra i due
telecomandi, fino a quando il LED non si
illumina di continuo.
5
Al termine, premere RECEIVER.
Programmazione di segnali
provenienti da altri
Qualora la memoria disponibile non sia
sufficiente per memorizzare questo tasto sul
telecomando, il LED lampeggerà due volte e
l'operazione sarà annullata.
telecomandi
Solo per VSX-D812/D912
Se i codici di preselezione non sono
disponibili per i propri componenti, o se i
codici di preselezione disponibili non
funzionano correttamente, è possibile
programmare i segnali dal telecomando di
altri componenti (ad esempio ꢁ, ꢂ, o altri
pulsanti operativi). Questa operazione può
essere utilizzata per programmare operazioni
supplementari (tasti non compresi nelle
preselezioni) dopo aver assegnato un codice
di preselezione.
5
Per programmare ulteriori segnali per
il componente attuale, ripetere le fasi 3 e 4.
Per programmare le operazioni per un altro
componente, uscire e ripetere le fasi da 1 a 5.
6
Al termine, premere RECEIVER per
memorizzare la/e operazione/i.
61
It
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Controllo del resto del sistema
Funzione diretta
Nota
• Impostazione implicita: ON
• Alcuni comandi di altri telecomandi non
si possono programmare, ma nella
maggior parte dei casi basta solo
avvicinare o allontanare i telecomandi
l’uno dall’altro.
È possibile utilizzare la funzione diretta per
controllare un componente mediante il
telecomando e, allo stesso tempo, utilizzando
il ricevitore per riprodurre un componente
differente. Questo, per esempio, consente di
utilizzare il telecomando per configurare ed
ascoltare un CD sul ricevitore, quindi
utilizzare il telecomando per riavvolgere un
nastro nel videoregistratore, mentre si
continua ad ascoltare il lettore CD.
• Alcuni tasti rappresentano modi che non
si possono programmare da altri
telecomandi. Questi modi includono:
RECEIVERꢀ,il tasti MULTI CONTROL,
RECEIVER CONTROL e MASTER
VOLUME.
Quando la funzione diretta è attivata, qualsiasi
componente verrà selezionato (mediante i
tasti MULTI CONTROL) sia dal ricevitore che
dal telecomando. Quando si disattiva la
funzione diretta, è possibile azionare il
Cancellazione di tutte le
impostazioni programmate
Solo per VSX-D812/D912
telecomando senza influenzare il ricevitore.
Con questo procedimento si cancellano tutti i
tasti programmati (vedi Segnali di
Programmazione di segnali provenienti da altri
telecomandi sopra riportato)e si ripristina il
pulsante all'impostazione di fabbrica.
1
Premendo il pulsante RECEIVER,
premere e tenere premuto il pulsante 4.
Il LED lampeggia.
2
Premere il tasto MULTI CONTROL per il
componente che si desidera controllare.
Il LED si illumina.
•
Premendo il pulsante RECEIVER,
premere e tenere premuto il pulsante 9
per tre secondi.
3
Utilizzare i tasti numerici per digitare 1
(funzione diretta attivata) o 2 (funzione
diretta disattivata).
Il LED lampeggia nuovamente.
Il LED si illumina di continuo per tre secondi,
quindi si spegne.
4
Ripetere le fasi 2 e 3 per gli altri
Cancellazione di tutte le
componente da azionare.
impostazioni del telecomando
5
Al termine, premere RECEIVER.
È possibile cancellare tutte le preselezioni e
ripristinare le impostazioni di fabbrica.
Nota
•
Premendo il pulsante RECEIVER,
premere e tenere premuto il pulsante 0
per tre secondi.
Il LED lampeggia tre volte per indicare che le
impostazioni sono state riportate ai valori di
fabbrica.
• Non è possibile utilizzare la funzione
diretta per TUNER.
62
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Controllo del resto del sistema
Comandi del televisore
10
Il presente telecomando consente di controllare i componenti dopo aver digitato i codici
adeguati o aver programmato i comandi del ricevitore (vedere Impostare il telecomando per
controllare altri componenti a pagina 60 per ultiriore informazioni ). Premere i tasti MULTI
CONTROL per selezionare il componente.
Tasto/i
Funzione
Componenti
TVꢀ
Accende o spegne il DTV.
DTV
Fa passare TV o CATV dallo stato di attesa a quello di
accensione.
TV via cavo/TV via satellite/
TV
INPUT
SELECT
Commuta l’entrata del televisore. (non è possibile con
tutti i modelli.)
TV
CHANNEL Seleziona i canali.
+/–
TV via cavo/TV via satellite/
TV/DTV
VOLUME
+/–
Regola il volume del televisore.
TV via cavo/TV via satellite/
TV/DTV
TOP MENU
MENU
TV
Utilizzato come il pulsante TEXT ON.
Seleziona diversi menu dalle funzioni del DTV.
Seleziona il menu su schermo.
DTV
TV via cavo/TV via satellite/
TV
AUDIO
GUIDE
TV via cavo/TV via satellite/
TV/DTV
Utilizzato come il pulsante AUDIO.
Utilizzare come tasto GUIDE per navigare.
Utilizzato come il pulsante TEXT OFF.
TV via cavo/TV via satellite/
DTV
TV
ꢃ
ꢄ
Utilizzare per scegliere i comandi BLU su un menu DTV. DTV
B/RED
TV via satellite/TV
Utilizzare per scegliere i comandi VERDi su un menu
DTV.
DTV
C/GREEN
TV via satellite/TV
DTV
ꢂ
Utilizzare per scegliere i comandi ROSSI su un menu
DTV.
D/YELLOW
TV via satellite/TV
63
It
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Controllo del resto del sistema
Tasto/i
Funzione
Componenti
ꢅ
Utilizzare per scegliere i comandi GIALLI su un menu
DTV.
DTV
E/CYAN
TV via satellite/TV
ꢆ
Premere per ottenere informazioni sui programmi DTV. DTV
A
TV via satellite/TV
ꢁ
Accende o spegne il DTV.
DTV
DTV
ꢇ
Utilizzare per selezionare il closed captioning del DTV.
Tasti
numerici
UseUtilizzare per selezionare un determinato canale del TV via cavo/TV via satellite/
televisore. TV/DTV
Tasto +10 Utilizzare per aggiungere un punto decimale durante la DTV
selezione di un determinato canale televisivo.
ENTER/
DISC
Utilizzare per inserire un canale.
TV via cavo/TV via satellite/
TV/DTV
ꢃꢄꢀꢁ e Seleziona o regola e naviga tra le voci sul menu su
DTV
ENTER
schermo.
ENTER riporta al menu del DTV.
Premere per selezionare o regolare e navigare tra le voci TV via cavo/TV via satellite/
sul menu su schermo. TV/DTV
Nota
• I quattro tasti TV CONTROL del telecomando sono adibiti al controllo del televisore
assegnato al tasto TV CONT. Quindi, se si ha un solo televisore da collegare al presente
apparecchio, assegnarlo al tasto TV CONT MULTI CONTROL. Se si hanno due televisori,
assegnare il televisore principale al tasto TV CONT.
64
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Controllo del resto del sistema
Comandi di altri componenti
10
Il presente telecomando consente di controllare i componenti dopo aver digitato i codici
adeguati o aver programmato i comandi del ricevitore (vedere Impostare il telecomando per
controllare altri componenti a pagina 60 per ultiriore informazioni ). Premere i tasti MULTI
CONTROL per selezionare il componente.
Tasto/i
Funzione
Componenti
SOURCEꢀ
Premere per far passare il componente dallo stato di
attesa a quello di accensione.
CD/MD/CD-R/VCR/DVD/
LD/lettore DVR/Piatto a
cassette
ꢃ
ꢅ
Premere per tornare all’inizio della traccia corrente.
Premere più volte per tornare all’inizio delle tracce
precedenti.
CD/MD/CD-R/DVD/
lettore LD
Riproduce il lato B di un nastro su una piastra con
autoreverse.
Piatto a cassette
Premere per avanzare all’inizio della traccia successiva. CD/MD/CD-R/DVD/
Premere più volte per saltare all’inizio delle tracce
successive.
lettore LD
Riproduce il lato A di un nastro su una piastra con
autoreverse.
Piatto a cassette
ꢄ
Introduce una pausa nella riproduzione o nella
registrazione.
CD/MD/CD-R/VCR/DVD/
LD/lettore DVR/Piatto a
cassette
ꢁ
Avvia la riproduzione.
CD/MD/CD-R/VCR/DVD/
LD/lettore DVR/Piatto a
cassette
ꢆ
ꢇ
ꢂ
Tenere premuto per la riproduzione rapida in avanti.
Tenere premuto per la riproduzione rapida all’indietro.
CD/MD/CD-R/VCR/DVD/
LD/ lettore DVR/Piatto
cassette
CD/MD/CD-R/VCR/DVD/
LD/ lettore DVR/Piatto
cassette
Interrompe la riproduzione (su alcuni modelli, la
pressione di questo tasto quando il disco è già stato
interrotto provoca l’apertura del vano del disco).
CD/MD/CD-R/VCR/DVD/
LD/ lettore DVR/Piatto
cassette
65
It
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Controllo del resto del sistema
Tasto/i
Funzione
Componenti
Tasti
numerici
Accesso diretto alle tracce di una fonte di programma.
CD/MD/CD-R/VCR/
lettore LD
Utilizzare i tasti numerici per navigare nel display su
schermo.
DVD/lettore DVR
Tasto +10
Seleziona le tracce di numero superiore a 10 (per
esempio, premere +10, quindi 3 per selezionare la
traccia 13).
CD/MD/CD-R/VCR/
lettore LD
ENTER/DISC
DVD
Cambia la modalità di ricerca.
Sceglie il disco.
Lettore CD multiplo
VCR
Utilizzare come il tasto ENTER.
Lettore DVR
Visualizza la schermata delle impostazioni dei lettori
DVR.
Cambia i lati del lettore LD.
Lettore LD
MENU
Visualizza i menu riguardanti il DVD o il DVR che si sta
utilizzando attualmente.
DVD/lettore DVR
ꢀ
Inserisce una pausa nel nastro.
Interrompe il nastro.
Piatto cassette
Piatto cassette
Piatto cassette
Piatto cassette
DVD/lettore DVR
ꢁ
ENTER
ꢃ/ꢄ
Avvia la riproduzione.
Riavvolgimento rapido/avanzamento rapido del nastro.
ꢃꢄꢀꢁ e Naviga tra i menu/le opzioni del DVD.
ENTER
CHANNEL
+/–
Seleziona i canali.
VCR/lettore DVR
TOP MENU Visualizza il menu superiore del disco di un DVD.
DVD/lettore DVR
DVD/lettore DVR
DVD/lettore DVR
AUDIO
GUIDE
Modifica la lingua dell’audio o il canale.
Visualizza/modifica i sottotitoli di DVD multilingue.
66
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Controllo del resto del sistema
10
Elenco dei codici di preselezione (solo per VSX-D712)
Se il produttore è compreso in questo elenco, non dovrebbero esserci problemi per
l'azionamento di un componente. Tenere tuttavia presente che in alcuni casi i codici dei
produttori elencati non funzioneranno con il modello da voi utilizzato. In altri casi, dopo aver
assegnato il codice preselezionato adeguato, sarà possibile controllare solo alcune funzioni.
Nota
• Il tasto TV CONT accetterà solamente i codici predefiniti per Televisore, STB e DTV.
SALORA 643
SAMSUNG 644, 646
BUSH 647
FUJITSU 648
SEI 649
FINLUX 655
SONY 604
PANASONIC 608, 622
TOSHIBA 605
SHARP 602
HITACHI 606, 633, 634,
654
AIWA 446
ALBA 447, 452
BUSH 448
THOMSON 449
BAIRD 450
TELEFUNKEN 451
GRUNDIG 453, 454, 455
MAGNAVOX 414
PANASONIC 408, 432,
TOSHIBA 405
JVC 407, 428
HITACHI 406
SONY 814, 823
YAMAHA 811, 822
PIONEER 800, 825
DVD
Produttore Codice
TOSHIBA 001
SONY 002
PANASONIC 003
JVC 004
SAMSUNG 005
SHARP 006
AKAI 007
RCA 009, 011
DENON 010
HITACHI 012 (DVD/CD/
CD-R)
PHILIPS 013
CD
Produttore Codice
GOLDSTAR 330
PANASONIC 304
BUSH 332
HITACHI 334
AKAI 335
ASUKA 337
FISHER 340
LUXMAN 341
SHARP 343
ROADSTAR 344
DENON 309
JVC 331
KENWOOD 310, 311
ONKYO 342
PHILIPS 322, 336
RCA 319
SONY 316, 329
TECHNICS 333
YAMAHA 338, 339
PIONEER 300
SANYO 645,
SONY 416, 417, 457, 458,
459 (Digitale Video)
MITSUBISHI 409, 424
SANYO 444
MITSUBISHI 609
GOLDSTAR 650
JVC 613
FUNAI 640
GRANDIENTE 657
PIONEER 600, 651, 231
ZENITH 014
THOMSON 015
SONY 016 (videogioco)
PIONEER 000, 008
SHARP 402
GOLDSTAR 411
GRADIENTE 441
PIONEER 400, 443
LD
STB (SATELLITE/CATV)
Produttore Codice
SONY 101, 102
HITACHI 109
DENON 110
PHILIPS 104
Registratore DVD
Produttore Codice
PIONEER 456
Produttore Codice
JERROLD 716
S.ATLANTA 706, 708
ZENITH 717
PIONEER 700
Piastra a cassette
Produttore Codice
PANASONIC 803
LUXMAN 815
NAKAMICHI 816
SHERWOOD 818
TAND BERG 820
PHILIPS 821
SANSUI 824
THOSHIBA 826, 828
AKAI 829
DENON 810, 827
FISHER 813
JVC 802
PIONEER 100,111 (DVD/
LD)
MD
Su STB digitale
Produttore Codice
PIONEER 200, 204
Produttore Codice
SONY 901
KENWOOD 903
SHARP 902
TEAC 904
ONKYO 905
DENON 906
PIONEER 900, 907 (DAT)
Televisore
Produttore Codice
RCA 618
PHILIPS 607, 656
GRUNDIG 631, 653
NOKIA 632, 652
FISHER 635, 638
THOMSON 636
TELEFUNKEN 637
ALBA 639
Sintonizzatore
Produttore Codice
PIONEER 500
Videoregistratore
Produttore Codice
AKAI 442
CD-R
Produttore Codice
TANDY 641
ITT 642
PHILIPS 346
KENWOOD 804, 807
ONKYO 817, 819
MATSU 445
PIONEER 345
67
It
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Controllo del resto del sistema
Elenco dei codici di preselezione (VSX-D812/D912)
Se il produttore è compreso in questo elenco, non dovrebbero esserci problemi per
l'azionamento di un componente. Tenere tuttavia presente che in alcuni casi i codici dei
produttori elencati non funzioneranno con il modello da voi utilizzato. In altri casi, dopo aver
assegnato il codice preselezionato adeguato, sarà possibile controllare solo alcune funzioni.
Nota
• IIl tasto TV CONT accetterà solamente i codici predefiniti per Televisore, STB e DTV.
BUSH 5024
MITSUBISHI 5098, 5099
MIVAR 5100
NEC 5101, 5102
NOKIA OCEANIC 5103
NORDMENDE 5104, 5105
OKANO 5106
ONWA 5107
PANASONIC 5108, 5109,
5110, 5111
PHILCO 5112, 5113, 5114
PHONOLA 5115
PORTLAND 5116, 5117
PROSCAN 5118
QUASAR 5119, 5120
RADIO 5121, 5122
RADIOSHACK 5123, 5124,
5125
RADIOLA 5126
RCA/PROSCAN 5127,
5128, 5129
SABA 5130
SAMSUNG 5131, 5132
SANYO 5133, 5134, 5135
DVD
Produttore Codice
TOSHIBA 1010
SONY 1009
SAMSUNG 1008
JVC 1005
RCA 1007
DENON 1004
PHILIPS 1006
TOSHIBA 1010
YAMAHA 1011, 1012
PIONEER 1001, 1002 , 1003
Videoregistratore
CLATRONIC 5025
CRAIG 5026, 5027, 5028,
5029
CROSLEX 5030
CURTIS MATHIS 5031,
5032, 5033
DAEWOO 5034, 5035,
5036, 5037, 5038, 5039
DAYTRON 5040
DUAL 5041
EMERSON 5042, 5043,
5044, 5045, 5046, 5047,
5048
FERGUSON 5049, 5050
FIRST 5051
FISHER 5052
Produttore Codice
PIONEER 3001, 3002,
3003, 3004, 3005
ADMIRAL 3006
AIWA 3007, 3008, 3009
AKAI 3010, 3011
ALBA 3012
AUDIO DYNAMIC 3013,
3014
BELL&HOWELL 3015
BLAUPUNKT 3016, 3017
BROCSONIC 3018, 3019
BUSH 3020
CANON 3021
CGM 3022, 3023
CITIZEN 3024
CLATRONIC 3025
CRAIG 3026
CURTIS MATHIS 3027,
3028, 3029
LD
Produttore Codice
SONY 2008
PHILIPS 2006, 2007
PANASONIC 2005
KENWOOD 2004
DENON 2003
FUJITSU 5053
FUNAI 5054, 5055, 5056
GE 5057, 5058, 5059, 5060
GOLDSTAR 5061, 5062,
5063, 5064
GOODMANS 5065, 5066
HITACHI 5067, 5068, 5069, SCHNEIDER 5136
5070, 5071
ICE 5072
IRRADIO 5073
ITT/NOKIA 5074,5075
JC PENNY 5076, 5077,
5078, 5079
JVC 5080, 5081
KENDO 5082
KTV 5083, 5084
LOEWE 5085
LXI 5086, 5087, 5088, 5089, TOSHIBA 5153, 5154
5090
MAGNAVOX 5091
MARK 5092
MATSUI 5093, 5094
MATSUSHITA 5095, 5096
MEDION 5097
YAMAHA 2009
PIONEER 2001, 2002
DAEWOO 3030, 3031,
3032
DBX 3033, 3034
DIMENSIA 3035
EMERSON 3036, 3037,
3038, 3039, 3040, 3041
FERGUSON 3042
FISHER 3043, 3044, 3045,
3046
FUNAI 3047, 3048
GE 3049, 3050, 3051
GOLDSTAR 3052
GOODMANS 3053, 3054
GRUNDIG 3055
SCOTT 5137, 5138
SHARP 5139, 5140
SIEMENS 5141
SIGNATURE 5142, 5143
SONY 5144, 5145
SYLVANIA 5146, 5147
SYMPHONIC 5148
TATUNG 5149
Televisore
Produttore Codice
PIONEER5001, 5002, 5003,
5004, 5005, 5006, 5007,
5008, 5009, 5010
ADMIRAL 5011, 5012,
5013
AIWA 5014, 5015
AKAI 5016
ALBA 5017
AOC 5018
BESTAR 5019
BLAUPUNKT 5020
BLUE SKY 5021
BRANDT 5022
TELEFUNKEN 5150, 5151
THORN 5152
UNIVERSUM 5155
VIDECH 5156, 5157
W. WHOUSE 5158
WARDS 5159, 5160, 5161
WATSON 5162
HITACHI 3056, 3057, 3058,
3059, 3060
INSTANT REPLAY 3061,
3062
ITT/NOKIA 3063
ZENITH 5163, 5164
BROCSONIC 5023
68
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Controllo del resto del sistema
10
JC PENNY 3064, 3065,
3066, 3067, 3068, 3069
JVC 3070, 3071, 3072
KENDO 3073
KENWOOD 3074, 3075,
3076
LOEWE 3077, 3078
LUXOR 3079
LXI 3080, 3081, 3082,
3083, 3084, 3085 , 3086
MARANTZ 3087, 3088
MARTA 3089
SCOTT 3141, 3142, 3143,
3144, 3145, 3146, 3147
SEG 3148
SELECO 3149
SHARP 3150, 3151, 3152
HNS/HUGHES 6014
HITACHI 6015
ITT/NOKIA 6016
JERROLD 6017, 6018,
6019, 6020, 6021
TECHNICS 7034, 7035
YAMAHA 7036, 7037,
7038, 7039
DENON 7040, 7041
JVC 7042
KENWOOD 7043
PHILIPS 7044
SONY 7045
SIEMENS 3153, 3154, 3155 NEC 6022, 6023
SIGNATURE 3156, 3157
SONY 3158, 3159, 3160,
3161, 3162, 3163
SYLVANIA 3164, 3165,
3166, 3167
SYMPHONIC 3168
TANDBERG 3169
OAK 6024, 6025, 6026
PANASONIC 6027, 6028,
6029
PHILIPS 6030, 6031
PRIMESTAR 6048
RADIO SHACK 6032
RCA 6033
DVR
Produttore Codice
PIONEER 4001
MATSUI 3090
MEMOREX 3091, 3092
MINOLTA 3093, 3094
MITSUBISHI 3095, 3096,
3097, 3098, 3099
MULTITECH 3100, 3101,
3102
TASHIRO 3170
SAMSUNG 6034, 6035
SCIENTIFIC ATLANTA
6036, 6037, 6038
SIEMENS 6039, 6040
SONY 6041
TATUNG 3171, 3172
TEAC 3173, 3174, 3175
TECHNICS 3176, 3177
TELEFUNKEN 3178, 3179
THORN 3180, 3181
TOSHIBA 3182, 3183, 3184 TOCOM 6044
UNIVERSUM 3185, 3186,
3187
W. WHOUSE 3188
WARDS 3189, 3190, 3191,
3192, 3193
YAMAHA 3194, 3195,
3196
MD
Produttore Codice
PIONEER 8001, 8002, 8003
DENON 8004
JVC 8005
KENWOOD 8006
SONY 8007
TOSHIBA 6042, 6043
NEC 3103
NOKIA OCEANIC 3104
NOKIA 3105, 3106
NORDMENDE 3107
OKANO 3108
OLYMPIC 3109, 3110
ORION 3111
PANASONIC 3112, 3113,
3114, 3115, 3116, 3117
PENTAX 3118, 3119
PHILCO 3120, 3121
PHILIPS 3122
ZENITH 6045, 6046
YAMAHA 8008, 8009
CD/CD-R
Produttore Codice
PIONEER 7001, 7002
DENON 7003, 7004, 7005
FISHER 7006, 7007
JVC 7008, 7009, 7010,
7011
KENWOOD 7012, 7013,
7014, 7015, 7016
MAGNAVOX 7017, 7018
MARANTZ 7019
ONKYO 7020, 7021
PANASONIC 7022, 7023
PHILIPS 7024, 7025
RCA 7026, 7027
SANYO 7028
SHARP 7029
Piastra a cassette
Produttore Codice
PIONEER 9001, 9002
DENON 9003, 9004
FISHER 9005, 9006
JVC 9007, 9008
ZENITH 3197
STB
KENWOOD 9009, 9010,
9011
Produttore Codice
PIONEER 6001, 6002,
6003, 6004, 6005, 6006
BELL 6049
BLAUPUNKT 6007
ECHOSTAR 6047
GENERAL INSTRUMENT
6008
PHONOLA 3123
QUASAR 3124, 3125
RCA/PROSCAN 3126
REALISTIC 3127, 3128,
3129, 3130, 3131, 3132
SABA 3133
SAMSUNG 3134, 3135
SANSUI 3136
NAKAMICHI 9012
ONKYO 9013, 9014, 9015
PHILIPS 9016, 9017
SONY 9018, 9019
TEAC 9020, 9021
TECHNICS 9022
YAMAHA 9023, 9024,
9025, 9026
GOLDSTAR 6009
GRUNDIG 6010, 6011
HAMLIN 6012, 6013
SANYO 3137, 3138
SCHNEIDER 3139, 3140
SONY 7030
TEAC 7031, 7032, 7033
69
It
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Altre informazioni
Capitolo 11:
Altre informazioni
Soluzione dei problemi
Un funzionamento anomalo può essere spesso interpretato come un guasto o un problema di
funzionamento. Se si ritiene che il presente componente non funzioni correttamente, eseguire i
controlli seguendo la lista sottostante. Talvolta il problema può riguardare un altro componente.
Controllare gli altri componenti e gli apparecchi elettrici usati. Se non si riesce a risolvere il
problema neppure dopo aver eseguito i controlli che seguono, rivolgersi al centro assistenza
Pioneer più vicino o al proprio rivenditore per la riparazione.
Problema
Rimedio
L’apparecchio non si
accende.
• Collegare la spina di alimentazione alla presa a muro.
• Staccare la spina di alimentazione dalla presa, quindi reinserirla.
• Assicurarsi che non vi siano conduttori esposti del cavo dei
diffusori a contatto con il pannello posteriore. Questo potrebbe
causare lo spegnimento automatico del ricevitore.
• Se la spia luminosa STANDBY lampeggia e l'alimentazione
viene automaticamente disattivata, portare l'apparecchio al
centro assistenza autorizzato Pioneer più vicino o al proprio
rivenditore affinché possano ripararlo.
Non viene emesso alcun
suono quando si seleziona
una funzione.
• Assicurarsi che il componente sia collegato correttamente
(rimettersi a Collegamento a pagina 16).
• Premere MUTE sul telecomando per disattivare il silenziamento.
• Regolare il MASTER VOLUME.
Non viene emessa alcuna
immagine quando si
seleziona una funzione.
• Assicurarsi che il componente sia collegato correttamente
(rimettersi a Collegamento a pagina 16).
• Selezionare il componente corretto (utilizzare i tasti MULTI
CONTROL).
Si sentono rumori molesti
• Sintonizzarsi sulla frequenza corretta.
durante la trasmissione radio. • Collegare l’antenna (rimettersi alla pagina 21).
• Allontanare i cavi digitali dai terminali e dai cavi dell’antenna.
• Estendere completamente l’antenna FM a filo, collegare nella
posizione che consente la ricezione ottimale e fissarla al muro.
• Collegare un’antenna FM esterna (rimettersi alla pagina 21).
• Regolare la direzione e la posizione per consentire una ricezione
ottimale.
• Collegare un’antenna aggiuntiva AM interna o esterna (rimettersi
alla pagina 21).
• Spegnere l’apparato che crea disturbi o allontanarlo dal ricevitore.
• Allontanare l’antenna dall’apparecchio che crea disturbi.
70
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Altre informazioni
11
Problema
Rimedio
Le stazioni radio non possono • Collegare un’antenna esterna (rimettersi alla pagina 21).
essere selezionate
automaticamente.
Non viene emesso alcun
• Per verificare l’impostazione dei diffusori, fare riferimento a
suono dai diffusori surround Impostazione dei diffusori a pagina 44.
posteriori.
• Per verificare i livelli dei diffusori, fare riferimento a Regolazione
manuale dell'area d'ascolto (MCACC) a pagina 49 (con il modello
VSX-D912, è possibile effettuare tale verifica utilizzando
Impostazione rapida del suono surround a pagina 14).
• Collegare correttamente l’antenna (rimettersi alla pagina 22).
Non viene emesso alcun
• Per verificare l’impostazione dei diffusori surround posteriori, fare
suono dai diffusori surround riferimento a Impostazione di un diffusore surround posteriore a
posteriori.
pagina 45.
• Per verificare i livelli dei diffusori, fare riferimento a Regolazione
manuale dell'area d'ascolto (MCACC) a pagina 49 (con il modello
VSX-D912, è possibile effettuare tale verifica utilizzando
Impostazione rapida del suono surround a pagina 14).
• Per verificare che la SB CH MODE e la modalità audio siano
adeguatamente impostate per il suono surround posteriore, fare
riferimento a Utilizzo del canale surround posteriore (Surround Back
Channel) (SB CH) a pagina 39.
Nessun suono emesso dal • Verificare che il subwoofer sia acceso.
subwoofer.
• Qualora il subwoofer sia provvisto di una manopola di
regolazione del volume, verificare che sia ruotata verso l'alto.
• Regolare Impostazione del subwoofer a pagina 45 su YES o PLUS.
• Regolare Impostazione attenuatore di LFE a pagina 46 su 0 dB o
10 dB.
• La fonte Dolby Digital o DTS che state ascoltando non dispone
di un canale LFE.
Si producono disturbi
durante la riproduzione di
una piastra a cassette.
• Allontanare la piastra a cassette dal ricevitore, finché non
scompare il rumore molesto.
Il suono viene emesso da altri • Impostare SIGNAL SELECT su AUTO, DIGITAL o ANALOG
componenti, ma non dal
riproduttore LD o DVD.
secondo il tipo di collegamenti effettuati (rimettersi alla pagina 37).
• Impostare correttamente le impostazioni delle entrate digitali.
(rimettersi alla pagina 48).
• Effettuare i collegamenti digitali (rimettersi alle pagina 17) ed
impostare SIGNAL SELECT su DIGITAL (rimettersi alla pagina 37).
• Rimettersi al manuale di istruzioni fornito in dotazione con il
lettore DVD.
71
It
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Altre informazioni
Problema
Rimedio
Non viene emesso alcun
suono o questo è
• Impostare i livelli del volume digitale del lettore su intero o sulla
posizione neutra.
accompagnato da disturbi
quando si riproduce
materiale in formato DTS.
Durante la riproduzione,
quando un lettore CD
• Non si tratta di cattivo funzionamento, ma assicurarsi di
abbassare il volume per evitare l’emissione di rumori molesti dai
compatibile con DTS esegue diffusori.
una ricerca, si emettono dei
rumori molesti.
Il telecomando non funziona. • Sostituire le batterie (rimettersi alla pagina 5).
• Mettere in funzionamento ad una distanza di 7 m, a 30° rispetto al
sensore remoto sul pannello anteriore (rimettersi alla pagina 6).
• Eliminare l’ostacolo e utilizzare da un’altra posizione.
• Evitare di esporre il sensore remoto sul pannello anteriore alla
luce diretta.
Il display è scuro oppure
spento.
• Premere ripetutamente FL DIMMER sul telecomando per tornare
all’impostazione implicita.
Nota
• Se l’apparecchio non funziona normalmente per via di influenze esterne, come l’elettricità
statica, staccare la spina dalla presa di corrente e reinserirla per tornare alle normali
condizioni di funzionamento.
Reset dell'unità principale
Attenersi a questa procedura per ripristinare tutte le impostazioni del ricevitore ai valori di
fabbrica. Eseguire le regolazioni utilizzando i pulsanti sul pannello anteriore.
1
Accendere il ricevitore.
2
Tenendo premuto il pulsante TONE, premere e tenere premuto il pulsante
ꢀ STANDBY/ON per circa tre secondi.
3
Nel momento in cui sul display viene visualizzato RESET?, premere il pulsante TONE.
Sul display sarà visualizzato OK?.
4
Premere ancora una volta TONE per confermare.
Sul display sarà visualizzato OK per indicare che il ricevitore è stato ripristinato ai valori di
fabbrica.
72
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Altre informazioni
11
Rapporto segnale/rumore [DIN (Uscita
potenza nominale continua/50 mW)]
CD, VCR/DVR, CD-R/TAPE/MD,
Caratteristiche tecniche
Sezione dell’amplificatore
DVD/LD, TV/SAT . . . . . . . . . . . . . . . . . . . . . .96 dB
Uscita di potenza continua (stereo)
Queste specifiche sono applicabili qualora
l'alimentazione sia pari a 230 V.
Sezione video
Entrate (Sensibilità/Impedenza)
VCR/DVR, DVD/LD, TV/SAT . . . . . . . 1 Vp-p/75 Ω
Anteriori . . . . . . . . . . . . . . . . . . 100 W per canale
(DIN 1kHz, THD 1 %, 8 Ω)
Uscite (Livello/Impedenza)
VCR/DVR, MONITOR OUT . . . . . . . . 1 Vp-p/75 Ω
Uscita di potenza continua (surround)
Queste specifiche sono applicabili qualora
l'alimentazione sia pari a 230 V.
Risposta in frequenza
VCR/DVR, DVD/LD,
TV/SAT ꢄ MONITOR . . . . . . 5 Hz a 7 MHz dB
Rapporto segnale/rumore . . . . . . . . . . . . . .55 dB
Anteriori . . . . . . . . . . . . . . . . . . 100 W per canale
(1kHz, 1,0 %, 8 Ω)
Centrale . . . . . . . . . . . . . . . . . . 100 W per canale
(1kHz, 1,0 %, 8 Ω)
Surround . . . . . . . . . . . . . . . . . 100 W per canale
(1kHz, 1,0 %, 8 Ω)
Surround posteriori . . . . . . . . . 100 W per canale
Sezione sintonizzatore FM
Gamma di frequenza . . . . . 87,5 MHz a 108 MHz
Sensibilità utilizzabile. . . . . . Mono:13,2 dBf, IHF
(1,3 µV/ 75 Ω)
(solo per VSX-D812/D912)
(1kHz, 1,0 %, 8 Ω)
Soglia di sensibilità a 50 dB . . . . Mono: 20,2 dB
Stereo: 38,6 dBf
Rapporto segnale/rumore
. . . . . . . . . . . . . . . . . . .Mono: 73 dB (a 85 dBf)
Stereo: 70 dB (a 85 dBf)
Distorsione . . . . . . . . . . . . . Stereo: 0,5 % (1 kHz)
Selettività secondo canale. . . . . . . . . . . . . .60dB
(400 kHz)
Entrate (Sensibilità/Impedenza)
CD, VCR/DVR, CD-R/TAPE/MD,
DVD/LD, TV/SAT. . . . . . . . . . . . . . . 200 mV/47 kΩ
Risposta in frequenza
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD,
TV/SAT . . . . . . . . . . . . . .5 Hz a 100.000 Hz dB
Separazione stereo. . . . . . . . . . . . . 40 dB (1 kHz)
Risposta in frequenza. . . . . . . . . . 30 Hz a 15 kHz
Uscite (Livello/Impedenza)
VCR/DVR REC, CD-R/TAPE/
MD REC . . . . . . . . . . . . . . . . . . . . 200 mV/2,2 kΩ
(
1 dB)
Entrata antenna (DIN). . . . . . 75 Ω asimmetrico
Controllo dei toni
Bassi . . . . . . . . . . . . . . . . . . . . . .
Alti. . . . . . . . . . . . . . . . . . . . . . . .
Acuti . . . . . . . . +6,5 dB/+3 dB (100 Hz/10 kHz)
(a livello di volume –50 dB)
Sezione sintonizzatore AM
6 dB (100 Hz)
6 dB (10 kHz)
Gamma di frequenza . . . . . 531 kHz a 1.602 kHz
Sensibilità (IHF, Antenna a telaio) . . . 350 µV/m
Selettività. . . . . . . . . . . . . . . . . . . . . . . . . . . .25 dB
Rapporto segnale/rumore . . . . . . . . . . . . . .50 dB
Antenna. . . . . . . . . . . . . . . . . . . Antenna a telaio
73
It
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Altre informazioni
Vari
Condizioni di alimentazione
. . . . . . . . . . . . . . . . . . . . . CA 220-230 V, 50/60Hz
Consumo
VSX-D712 . . . . . . . . . . . . . . . . . . . . . . . . . 250 W
VSX-D812/D912 . . . . . . . . . . . . . . . . . . . . 280 W
Nel modo di attesa . . . . . . . . . . . . . . . . . .0,5 W
Dimensioni . . . . . 420 (L) x 158 (A) x 401 (P) mm
Peso (senza imballaggio)
VSX-D712 . . . . . . . . . . . . . . . . . . . . . . . . . 9,5 kg
VSX-D812/D912 . . . . . . . . . . . . . . . . . . . 10,0 kg
Accessori in dotazione
Antenna AM a telaio. . . . . . . . . . . . . . . . . . . . . . 1
Antenna FM a filo . . . . . . . . . . . . . . . . . . . . . . . . 1
Pile a secco (Formato AA/IEC R6). . . . . . . . . 2
Telecomando . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Microfono (solo per VSX-D912). . . . . . . . . . . 1
Supporto per microfono
(solo per VSX-D912) . . . . . . . . . . . . . . . . . . . . 1
Qesti istruzioni per l’uso . . . . . . . . . . . . . . . . . . 1
Nota
• Le caratteristiche tecniche ed il design
sono soggetti a possibili modifiche dovute
al miglioramento del prodotto senza
obbligo di preavviso.
Pulizia dell’apparecchio
• Utilizzare un panno per lucidare o un
panno asciutto per rimuovere polvere e
sporco.
• Se le superfici sono molto sporche, pulirle
con un panno morbido impregnato con
un detergente neutro diluito in cinque o
sei parti di acqua e ben strizzato, quindi
pulire di nuovo con un panno asciutto.
Non utilizzare cera o pulitori per mobili.
• Non utilizzare diluenti, benzina, spray
insetticidi o altre sostanze chimiche su
questo apparecchio o nei pressi di esso,
in quanto queste sostanze potrebbero
corrodere le superfici.
74
It
Download from Www.Somanuals.com. All Manuals Search And Download.
Altre informazioni
11
75
It
Download from Www.Somanuals.com. All Manuals Search And Download.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Published by Pioneer Corporation
Copyright©2003 Pioneer Corporation
All rights reserved
Pubblicato da Pioneer Corporation
Copyright©2003 Pioneer Corporation
Tutti i diritti reservati
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 656-472-1111
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
K002E
<TNGNW/03B00001>
Printed in
<XRE3070-A>
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Pelco Security Camera C626M B User Manual
Pelco TV Mount c216sm User Manual
Philips Thermostat SCB5650NB User Manual
Polk Audio Portable Speaker RM7200S User Manual
PORT Video Game Keyboard 9 combokqxd User Manual
Poulan Tiller 413157 User Manual
Power Drive Marine Battery 100D User Manual
Pride Mobility Wheelchair I NFMANU1138 User Manual
Proxima ASA Projector PROAV9410L User Manual
PYLE Audio Microcassette Recorder PVR825 User Manual