AUDIO/VIDEO
MULTI-CHANNEL RECEIVER
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introductory Inform ation ..................................... 5
Using this Manual........................................................................................... 5
Preparing the Remote Control........................................................................ 6
Connecting Antennas ..................................................................................... 7
Connecting Speakers ................................................................................... 11
Setting Up for Surround Sound .................................................................... 13
Front Panel ................................................................................................... 17
Display .......................................................................................................... 18
Remote Control ............................................................................................ 19
Listening in Dolby Pro Logic Mode .............................................................. 20
Listening in DSP Mode ................................................................................. 22
Finding a Station ........................................................................................... 23
Tuning Directly to a Station ........................................................................... 24
Memorizing Stations .................................................................................... 25
Naming Memorized Stations ........................................................................ 26
Recalling Memorized Stations ...................................................................... 27
An Introduction to RDS & EON .................................................................... 28
Using EON Search ........................................................................................ 31
Making an Audio Recording ......................................................................... 32
Making a Video Recording ............................................................................ 33
CD/MD/CD-R Player Controls ....................................................................... 34
Cassette Deck Controls ................................................................................ 35
DVD Player Controls ..................................................................................... 36
TV Controls ................................................................................................... 37
Troubleshooting ............................................................................................ 38
Specifications ............................................................................................... 40
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Five channels of independent am plification
Five independent power amplifiers, each rated at 80W, ensure accurate, dynamic reproduction
of all multi-channel material.
Dolby* Pro Logic
Enjoy stunning multi-channel, surround sound effects from movies and other material recorded
in Dolby Surround/Pro Logic. Enhance your listening experience further with built-in signal
processing that recreates the movie theater ambience in your living room.
Digital surround effects
Using Digital Signal Processing (DSP) technology, various listening environments, such as a
theater or a jazz club, may be simulated and applied to any music or video source.
Convenient RDS/ EON radio tuning
Use the fast and convenient RDS system to immediately find the type of radio programme
you want to listen to. This program identification system could also be extremely useful in
locating helpful broadcasts in emergencies or adverse weather conditions.
DVD 5.1 channel input
A special 5.1 Channel input makes the VSX–409RDS fully compatible with Dolby Digital
decoders and DVD players with 5.1 channel outputs.
The Energy-saving Design
This unit is designed to use minimal electricity when power is switched OFF (in Standby
m ode ). Re garding the value of the pow e r cons um ption in s tandby m ode , re fe r to
“Specifications” on pages 40.
* Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and double-D symbol are trademarks
of Dolby Laboratories. Confidential unpublished works. ©
1992-1997 Dolby Laboratries.All rights reserved.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introductory Inform ation
Checking the Supplied Accessories
Please check that you've received the following supplied accessories:
SOURCE SELECT
SOURCE
DVD
CD
TUNER
TV CONT. TAPE
MD
CD-R
$
$
!
!
1
2
3
4
*
6
&
7
#
8
5
TV VOL.
EFFECT
CHANNEL
TATION
S
9
0
D. ACCESS
TOP MENU
CLASS
MENU
FQ
RF ATT
DIS
P
ENTER
FQ
TEST
TONE
MP
X
SET UP
S
ORROUND
2
DS
P
M
ODE MUTING
CH. SELECT
LEVEL
FL
MASTER
RECEIVER FUNCTION
DIMMER VOLUME
AM loop antenna
FM wire antenna
'AA' size IEC R6P
batteries (x2)
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
Remote control unit
Using this Manual
This manual is for the VSX-409RDS audio/video
multi-channel receiver. It is divided into two main
sections:
The following symbols are used
throughout this manual:
Set up
Provides detailed precautions and
advice on operations, etc.
memo
This section covers installing your receiver and
connecting up all the other components in your
home theater system to it. It also describes how to
set up a multi-channel speaker system to take full
advantage of the great surround sound features of
your receiver.
Indicates that display is blinking.
Operation
This section shows you how to use every feature of
the receiver and its remote control unit. It also
covers using the supplied remote control to operate
your other Pioneer home theater components. To
find out more about a specific button, control or
indicator, see Displays & Controls starting on page
17. This will point you to the relevant chapter in the
manual.
In the Additional Information section (p.38-40) you'll
find a troubleshooting section and specifications.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introductory Inform ation
Preparing the Rem ote Control
Loading the batteries
CAUTION!
Dry cell batteries
Incorrect use of batteries may result in such
hazards as leakage and bursting. Observe
the following precautions:
('AA' size IEC R6P ¥ 2)
¶ Never use new and old batteries together.
¶ Insert the plus and minus sides of the
batteries properly according to the marks
in the battery case.
¶ Batteries with the same shape may have
different voltages. Do not use different
batteries together.
Operating range of rem ote control unit
The remote control may not work properly if:
memo
¶ There are obstacles between the remote control
and the receiver's remote sensor.
¶ Direct sunlight or fluorescent light is shining onto
the remote sensor.
¶ The receiver is located near a device that is
emitting infrared rays.
30
30
¶ The receiver is operated simultaneously with
another infrared remote control unit.
1
2
3
4
5
6
-
+
+
-
7m
Special note on the rem ote control
Please note that the remote control has two types of buttons, one called FUNCTION and a set of buttons called
SOURCE SELECT. Use the FUNCTION button to choose the component you want to listen to (CD, CDR/TAPE,
TUNER, etc.) and use the SOURCE SELECT buttons to change which component the remote control itself will
operate. Thus, if the VSX-409RDS is in TUNER mode, for example, and you want to listen to your CD player, you
need to select the CD mode with the FUNCTION button.
Operating other Pioneer com ponents
By connecting a control cord (optional), you can
control other Pioneer equipment using this remote
control unit. Point the remote control unit towards
CONTROL
CONTROL
OUT
IN
the remote sensor of this unit, even when operating
other equipment.
OUT
The remote control signals are received by the
remote sensor of this unit, and sent to the other
devices via the CONTROL OUT terminal.
VSX-409RDS
Other Pioneer products
with Î mark
You can also control Pioneer components
memo
by pointing the receiver's remote control
directly at the component. This type of
operation does not require control cords.
Connect to CONTROL IN
terminal of other Pioneer
products with Î mark.
Remote control unit
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your System
Before m aking or changing the connections, sw itch off the pow er sw itch and disconnect the pow er
cord from the AC outlet.
Connecting Antennas
Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound
quality, connect external antennas (see Using external antennas, below). Always make sure that the receiver is
switched off and unplugged from the wall outlet before making or changing any connections.
AM loop antenna
Assemble the antenna and connect to the receiver. Attach to
a wall, etc. (if desired) and face in the direction that gives the
best reception.
L
R
AM LOOP
ANTENNA
IN
CD
CONTROL
OUT
O
U
T
VCR/
DVR
IN
IN
IN
IN
IN
OUT
TO
FM ANTENNA
TV/
MONITOR
TV
SAT
R
L
R
L
SUB
W OOFER
PREOUT
DVD
/
FM
UNBAL
7 5 Ω
LD IN
FRONT
SURROUND
R
E
C
OUT
R
L
CD-R
TAPE
/
/
MD
P
L
A
Y
CENTER
IN
FRONT
SPEAKERS
CENTER
SPEAKER
SURROUND
SPEAKERS
SUB
W OOFER
DVD 5 .1 CH
INPUT
FM w ire antenna
Connect the FM wire antenna and fully extend
vertically along a window frame, etc.
10m m
Antenna snap connectors
Twist the exposed wire strands
together and insert into the hole,
then snap the connector shut.
Using external antennas
7 To im prove FM reception
7 To im prove AM reception
Connect an external FM antenna.
Connect a 5–6 meter length of vinyl-coated wire to the AM antenna
terminal without disconnecting the supplied AM loop antenna.
For the best possible reception, suspend horizontally outdoors.
Outdoor antenna
FM ANTENNA
AM LOOP
ANTENNA
Indoor antenna
(Vinyl-coated w ire)
5–6m
FM
UNBAL
7 5 Ω
75 Ω coaxial cable
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your System
Connecting Audio Com ponents
Connect your audio components as shown below. When connecting equipment, always make sure the power
switched off and the power cord is disconnected from the wall outlet.
CD player
OUT
L
R
L
R
AM LOOP
ANTENNA
IN
CD
CONTROL
OUT
O
U
T
VCR/
DVR
IN
IN
IN
IN
IN
TO
FM ANTENNA
TV/
MONITOR
SAT
TV
R
L
R
L
SUB
W OOFER
PREOUT
DVD
/
FM
UNBAL
7 5 Ω
LD IN
FRONT
SURROUND
R
E
C
OUT
R
L
CD-R
TAPE
/
/
MD
P
L
A
Y
CENTER
IN
FRONT
SPEAKERS
CENTER
SPEAKER
SURROUND
SPEAKERS
SUB
W OOFER
DVD 5 .1 CH
INPUT
PLAY REC
L
R
Audio cords
Use good quality audio cords with RCA/phono plugs at each
end (not supplied) to connect your audio components.
CD-R , Cassette deck
MD , DAT etc.
L
Connect red plugs to R (right) and
white plugs to L (left) terminals.
R
Be sure to push home the plugs into
their sockets.
Cassette deck placem ent
Depending on where the cassette deck is placed, noise caused by leakage flux from the transformer in the
receiver may occur during playback. If you experience noise, move the cassette deck farther away from the
receiver.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your System
Connecting DVD 5.1 Channel Com ponents
DVD and LD discs are often compatible with both 2 channel and 5.1 channel audio output formats. Refer to page
21 for more information on how to switch between the two input methods.
Connections can be made from a DVD player, multi channel decoder equipped with 5.1 analogue outputs to the
5.1 analogue inputs on this unit. When connecting equipment, always make sure the power switched off and
the power cord is disconnected from the wall outlet.When connecting equipment, always make sure the power
switched off and the power cord is disconnected from the wall outlet.
L
R
AM LOOP
ANTENNA
IN
CD
CONTROL
OUT
O
U
T
VCR/
DVR
IN
IN
IN
IN
IN
TO
FM ANTENNA
TV/
MONITOR
SAT
TV
R
L
R
L
SUB
W OOFER
PREOUT
DVD
/
FM
UNBAL
7 5 Ω
LD IN
FRONT
SURROUND
R
E
C
OUT
R
L
CD-R
TAPE
/
/
MD
P
L
A
Y
CENTER
IN
FRONT
SPEAKERS
CENTER
SPEAKER
SURROUND
SPEAKERS
SUB
W OOFER
DVD 5 .1 CH
INPUT
FRONT
OUT PUT
SURROUND
OUT PUT
SUB
W OOFER
VODEO
OUT
CENTER
L
L
R
R
Components equipped
with 5.1 channel
analogue output jacks
memo
The 5.1 channel input can only be used when DVD 5.1 CH is selected.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your System
Connecting Video Com ponents
Connect your video components as shown below. When connecting equipment, make sure the power is
switched off and the power cord disconnected from the wall outlet.
Audio/ Video cords
Use good quality audio/video cords with RCA/phono plugs at each end
(not supplied) to connect the video components and a video cord to
connect the monitor/TV.
VCR, DVR, etc.
IDE
Connect red plugs to R (right), white plugs to
OUT IN
V
IN
L (left), and the yellow plugs to VIDEO.
L
R
Be sure to push home the plugs into their
sockets.
L
R
AM LOOP
ANTENNA
IN
CD
CONTROL
OUT
O
U
T
VCR/
DVR
IN
IN
IN
IN
IN
OUT
TO
FM ANTENNA
TV/
MONITOR
SAT
TV
R
L
R
L
DVD
/
FM
UNBAL
7 5 Ω
LD IN
FRONT
SURROUND
R
E
C
OUT
R
L
CD-R
TAPE
/
/
MD
P
L
A
Y
CENTER
IN
FRONT
SPEAKERS
CENTER
SPEAKER
SURROUND
SPEAKERS
SUB
W OOFER
DVD 5 .1 CH
INPUT
OUT
V
IN
TV
m onitor
L
R
VIDEO
DVD , LD player
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your System
Connecting Speakers
Connect your speakers as shown below. Be sure to connect each speaker to the appropriate speaker terminals,
and also to connect the positive and negative terminals correctly (positive to positive, negative to negative).
When connecting equipment, always make sure the power switched off and the power cord is disconnected
from the wall outlet.
• Use speakers with a nominal impedance of 8 Ω to 16 Ω.
When connecting equipment, always make sure the power switched off and the power cord is disconnected
from the wall outlet.
Powered
sub-woofer
Front
(left)
Front
(right)
Center
INPUT
L
R
AM LOOP
ANTENNA
IN
CD
CONTROL
OUT
O
U
T
VCR/
DVR
IN
IN
IN
IN
IN
OUT
TO
FM ANTENNA
TV/
MONITOR
TV
SAT
R
L
R
L
SUB
W OOFER
PREOUT
DVD
/
FM
UNBAL
7 5 Ω
LD IN
FRONT
SURROUND
R
E
C
OUT
R
L
CD-R
TAPE
/
/
MD
P
L
A
Y
CENTER
IN
FRONT
SPEAKERS
CENTER
SPEAKER
SURROUND
SPEAKERS
SUB
W OOFER
DVD 5 .1 CH
INPUT
Surround
(left)
Surround
(right)
Speaker term inals
Use good quality speaker wire to connect the speakers to the
receiver.
1 Twist around 10 mm of bare wire strands together.
2 Unclip the speaker terminal and insert the wire.
3 Snap shut the speaker terminal to secure.
ª
·
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your System
Hints on speaker placem ent
Speakers are usually designed with a particular placement in mind. Some are designed to be floorstanding, while
others should be placed on stands to sound their best. Some should be placed near a wall; others should be
placed away from walls. Follow the guidelines on placement that the speaker manufacturer provided with your
particular speakers to get the most out of them.
•
•
Place the front left and right speakers at equal
distances from the TV.
Whe n placing s pe ake rs ne ar the TV, w e
recommend using magnetically shielded speakers
to pre ve nt pos s ible inte rfe re nce , s uch as
discoloration of the picture when the TV is switched
on. If you do not have m agne tically s hie lde d
speakers and notice discoloration of the TV picture,
move the speakers farther away from the TV.
Install the center speaker above or below the TV
so that the sound of the center channel is localized
at the TV screen.
To achieve the best possible surround sound, install
your speakers as shown below. Be sure all speakers
are installed securely to prevent accidents and
improve sound quality.
•
Front
Left
Front
Right
CAUTION!
Center
If you choose to install the center speaker on
top of the TV, be sure to secure it with putty,
or by other suitable means, to reduce the risk
of damage or injury resulting from the speaker
falling from the TV in the event of external
shocks such as earthquakes.
Sub
Woofer
Surround
Left
Surround
Right
•
•
If possible, install the surround speakers slightly
above ear level.
Try not to install the surround speakers farther away
from the listening position than the front and center
speakers. Doing so can weaken the surround sound
effect.
Listening
Position
3-D View of speaker set up
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up for Surround Sound
Setting Up for Surround Sound
The VSX-409RDS offers several options for surround sound listening, depending on the speakers in your set up.
Having installed the speakers in your room it's important to set up the relative volume levels and speaker
distances in order to make the most of the receiver's surround sound capabilities. You only need to make these
settings once, unless you change the placement of your current speaker system or add new speakers, etc.
Setting the center m ode, the subw oofer and speaker distances
It is important to set the type of center mode which corresponds to your speaker system, set the subwoofer on/
off and set speaker distances as well as set volume levels of each speaker. From your normal listening position,
the volumes of the various speakers in your system should appear to be equal. Follow the steps below to do all
of these things, especially adjust the volumes of the center and surround speakers relative to the main front
speakers for Dolby Pro Logic mode, 5.1 CH. mode and the DSP mode.
1 Sw itch on the receiver.
The STANDBY indicator goes out.
2 Press the SURROUND button.
SOURCE SELECT
3 Press the 3 button to select the surround
SOURCE
DVD
CD
TUNER
sound setup m ode.
TV CONT. TAPE
MD
CD-R
Repeatedly pressing the button cycles through the three setup
modes (center mode setup; subwoofer setup; distance setup). The
mode appers in the display on the front panel.
$
1
$
!
3
!
2
4
TV FUNC.
@
5
*
6
&
7
#
8
TV VOL.
EFFECT
CHANNEL
STATION
9
0
D. ACCESS
TOP MENU
CLASS
MENU
4
3
4
4 Use the 5∞ buttons to select one of the four
FQ
RF ATT
DISP
types of center m ode.
ENTER
TEST
TONE
MPX
SET UP
FQ
See the center mode cycle shown here and the diagrams below
explaining each center mode to decide which center mode to
choose
SORROUND
2
DSP MODE MUTING
2
1
CH. SELECT
LEVEL
3 NORMAL 2
3 3 STEREO 2
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
WIDE
PHANTOM
3
2
3
2
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
Norm al
Middle and high frequency sounds are heard from
the center speaker.
Bass frequencies from the center channel are
played through the front speakers.
3 Stereo
Surround channel sounds and center channel bass
frequencies are heard through the front stereo
speakers.
1
Phantom
Center channel sounds are played through both
front speakers equally.
Wide
If a full range speaker is used for the center
channel, all center channel sound, including bass
frequencies, are heard through the center
speaker.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up for Surround Sound
5 Press the 3 button to select the SUBWF
(subw oofer) select m ode.
6 Use the 5∞ buttons to turn the subw oofer
function on or off.
SOURCE SELECT
SOURCE
DVD
CD
TUNER
Select SUBWF ON if you have a subwoofer and SUBWF OFF if
you don't have a subwoofer.
TV CONT. TAPE
MD
CD-R
$
$
!
!
1
2
3
4
TV FUNC.
@
*
&
#
7 Press the 3 button to select the distance
5
6
7
8
TV VOL.
EFFECT
CHANNEL
STATION
m ode for the FRNT (front) speakers.
9
0
D. ACCESS
TOP MENU
CLASS
MENU
6
For true surround sound effect the sound from the front speakers
and the surround speakers should arrive to the listener's ears at a
slightly different time. Telling the receiver how far your front and
surround speakers are from your listening position will allow the
receiver to do this correctly for you. The first distance setting you'll
see will be FRNT for your front speakers. You can set the distance
in a range from 0.3-9 metres.
, 8,10
FQ
RF ATT
DISP
ENTER
TEST
TONE
MPX
SET UP
5,7,9
6, 8,10
FQ
SORROUND
2
DSP MODE MUTING
CH. SELECT
LEVEL
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
8 Press the 5∞ buttons to increase/ decrease
the distance of the FRNT speakers.
You need to judge how far the speakers are from your normal
listening position and set the distance accordingly. You can set the
distance in a range from 0.3–9 metres.
9 Press the 3 button to select the distance
m ode for the SURR (surround) speakers.
10 Press the 5∞ buttons to increase/ decrease
the distance of the SURR speakers.
Again, You need to judge how far the speakers are from your
normal listening position and set the distance accordingly. As
above, you can set the distance in a range from 0.3-9 metres.
When you are finished setting up the distance the receiver will
return to normal operating mode after about 20 seconds.
Alternatively, you can cycle through the setup mode options with
the 2, 3 buttons until you return to the regular operating mode.
You only need to do the distance settings if your system has
surround speakers.
memo
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up for Surround Sound
Setting up speaker levels for Dolby Pro Logic
In order to get the best surround sound you need to set up the relative speaker levels so that they all have the
same volume from your normal listening position. Follow the steps below using the TEST TONE to do this.
1 Press the SURROUND button.
2 Press the 2 button.
SOURCE SELECT
SOURCE
DVD
CD
TUNER
TV CONT. TAPE
MD
CD-R
3 Press the TEST TONE button.
$
$
!
3
!
A short test tone will be heard from each speaker in your set up in
turn. No test tone is heard from the sub woofer, however.
1
2
4
TV FUNC.
@
5
*
6
&
7
#
8
TV VOL.
EFFECT
CHANNEL
STATION
9
0
4 Adjust the respective speaker levels w ith the
LEVEL +/ – buttons w hen the TEST TONE
sounds from that speaker.
D. ACCESS
TOP MENU
CLASS
MENU
FQ
RF ATT
DISP
ENTER
TEST
TONE
MPX
SET UP
2
4
FQ
3, 5
1
Adjust the volumes of the speakers so that the volume of all
speakers appears equal from your normal listening position.
SORROUND
2
DSP MODE MUTING
CH. SELECT
LEVEL
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
5 Press TEST TONE again.
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
When you are satisfied that the set up is complete, press the TEST
TONE button to return to normal operation.
• No TEST TONE sounds for the subwoofer
memo
• These speaker level settings are applicable to PRO LOGIC,
PRO LOGIC THEATER 1 & PRO LOGIC THEATER 2 settings.
Setting up speaker levels for DVD 5.1 CH
1 Use the FUNCTION button to select DVD 5.1
CH input m ode.
2 Play a DVD 5.1 CH source and set volum e.
3 Press the CH. SELECT button.
The first speaker, FL (front left), and its relative volume level
(+/–**dB) appears in the display.
SOURCE SELECT
SOURCE
DVD
CD
TUNER
TV CONT. TAPE
MD
CD-R
$
1
$
!
3
!
4 Adjust the front left (FL) speaker level w ith
the LEVEL +/ – buttons.
2
4
TV FUNC.
@
5
*
6
&
7
#
8
TV VOL.
EFFECT
CHANNEL
STATION
Adjust the volumes of the speakers to a standard level of your
choice when seated in your normal listening position.
9
0
D. ACCESS
TOP MENU
CLASS
MENU
FQ
RF ATT
DISP
ENTER
TEST
TONE
MPX
SET UP
5 Press CH. SELECT again to m ove to the next
speaker.
FQ
SORROUND
2
DSP MODE MUTING
CH. SELECT
LEVEL
The second speaker CT (center) and it's relative volume level (+/–
**dB) appears in the display.
4, 6,
7
2
3, 5,
7
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
6 Adjust the center (CT) speaker level w ith the
LEVEL +/ – buttons.
Adjust the speaker volume so it seems the same as the previous
speaker from your normal listening position.
1
7 Repeat steps 3 & 4 for all of your speakers.
Adjust the volumes of the all speakers so their volume seems the
same from your normal listening position.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up for Surround Sound
Setting up speaker levels for DSP
1 Use the DSP MODE button to turn on a DSP
effect. You can cycle through the five
different types w ith the DSP button.
2 Play a source (CD, tape,etc.) and set m aster
volum e to a m oderate level.
SOURCE SELECT
SOURCE
DVD
CD
TUNER
TV CONT. TAPE
MD
CD-R
3 Press the CH. SELECT button.
$
1
$
!
3
!
2
4
TV FUNC.
The first speaker FL (front left) and it's relative volume level (+/–
**dB) appears in the display.
@
*
&
#
5
6
7
8
TV VOL.
EFFECT
CHANNEL
STATION
9
0
D. ACCESS
TOP MENU
CLASS
MENU
FQ
4 Adjust the front left (FL) speaker level w ith
the LEVEL +/ – buttons.
RF ATT
DISP
ENTER
TEST
TONE
MPX
SET UP
1
FQ
Adjust the volumes of the speakers to a standard level of your
choice when seated in your normal listening position.
SORROUND
2
DSP MODE MUTING
CH. SELECT
LEVEL
4, 6,
7
2
FL
DIMMER
MASTER
VOLUME
3, 5,
7
RECEIVER FUNCTION
5 Press CH. SELECT again to m ove to the next
speaker.
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
The second speaker CT (center) and it's relative volume level (+/–
**dB) appears in the display.
6 Adjust the center (CT) speaker level w ith the
LEVEL +/ – buttons.
Adjust the volume of the speaker so its volume seems the same as
the previous speaker from your normal listening position.
7 Repeat steps 3 & 4 for all of your speakers.
Adjust the volumes of the all speakers so their volume seems the
same from your normal listening position.
• These speaker level settings are applicable to DSP effects
memo
only.
• Each effect level applies only to the DSP type (HALL for
example) that it is set in. You can set the effect levels for
each type independently.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays & Controls
Front Panel
1 2 3 4 5 6 7 8 9
0
- = ~
!
@
#
$
%
^ &
*
(
- Rem ote sensor
1 MAIN POWER button
Receives the signals fromthe remote control.
Push to send electricity to the receiver. Note the
STANDBY/ON button below actually turns the
receiver on and standby.
= DSP MODE button (see p. 22)
Use to switch between the various DSP modes
available (HALL, J AZZ, DANCE, THEATER1,
THEATER2) and DSP off. Use to create different
surround sound effects from any stereo source.
2 STANDBY indicator
Lights when the receiver is in standby mode
(note that the receiver consumes a small amount
of power (1W) in standby mode).
~ DOLBY PRO LOGIC button (see p. 20)
Use to switch between the various Pro Logic
modes (PRO LOGIC, PRO LOGIC THEATER1,
PRO LOGIC THEATER2) and Pro Logic off.
3
STANDBY/ ON button
Switches the receiver between on and standby.
4 STATION (+/ –), FREQUENCY (+/ –),
! MASTER VOLUME
TUNING SELECT buttons (see p. 23–27)
STATION (+/–)
Use to set the overall listening volume.
Selects station memories when using the tuner.
FREQUENCY (+/–)
Selects the frequency when using the tuner.
TUNING SELECT
@ PHONES jack
Connect headphones for private listening .
# SPEAKERS button
Use to switch the speaker system on or off.
Switches between station memory and
frequency select modes.
$ FL DIMMER button
5 CLASS button (see p. 25-27)
Switches between the three banks (classes) of
station memories.
Use this button to make the fluorescent display
(FL) dimmer or brighter. There are three
brightness settings as well as an off setting.
% BASS (+/ –) buttons
6 MEMORY button (see p. 25, 26, 29, 30)
Press to memorize a station for recall using the
STATION (+/–) buttons. Also use to search in
RDS mode
Use to increase/decrease bass (within a range of
– 6dB to 6dB in 2dB steps). It cannot be used
when S.BASS is on.
^ TREBLE (+/ –) buttons
7 RF ATT button (see p. 23)
Use to increase/decrease treble (within a range
of – 6dB to 6 dB in 2dB steps).
Use to lower the input level of a radio signal that
is too powerful or has interfering waves, thus
causing the receiver to distort
& Function buttons
8 CHARACTER/ SEARCH button(see
Use to select a source for playback or recording.
p.30)
* S.BASS button
Use this button to search for different program
types in RDS mode. It is also used to input
station names.
Use to switch on and off the bass boost. Use for
a more powerful bass sound. Negates use of
BASS buttons.
9 EON MODE button (see p. 31)
Use this button to search for different programs
that are transmitting traffic or news information
(this search method is called EON).
( DIRECT button
Use to switch DIRECT playback on or off. This
mode bypasses all tone controls, Dolby, DSP and
channel levels for the most accurate
reproduction of a program source.
0 Display (see p. 18)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays & Controls
Display
1
2
3
4
5
6 7 8
M ON O
TUN ED
S TEREO
P RO LOGIC DS P
DIRECT M ON ITOR
EON
RDS
RF ATT
S . BAS S
S P
A
dB
=
-
0
9
1 2 PRO LOGIC indicator
Lights when any Dolby Pro Logic mode is
selected.
7 RDS indicator
Lights when an RDS broadcast is received.
8 RF ATT indicator
The main character display briefly shows the
current Pro Logic mode (PRO LOGIC,
THEATER1, THEATER2) after selection (see
page 20).
Lights when the RF ATT is on (see p. 23).
9 MASTER VOLUME LEVEL
Shows the overall volume level. Volume level is
maintained even when the power is off. ---dB
indicates the minimum level, and 0dB indicates
the maximum level.
2 DSP indicator
Lights when any DSP mode is selected. The
main character display briefly shows the current
DSP mode (HALL, J AZZ, DANCE, THEATER1
and THEATER2) after selection (see page 22).
•
Depending on the level settings for
individual channels, the MAX level can
range between –10dB and 0dB.
3 DIRECT indicator
0 SPEAKER indicator
Lights when source DIRECT is on. This function
bypasses all tone, channel level, DSP and Dolby
Surround effects.
Shows if the speaker system is on or not. If
SP3A appears speakers are switched on. If SP3
appears speakers are switched off.
4 MONITOR indicator
- S. BASS indicator
Lights when MONITOR is selected to hear a
recording as it's being made (see p. 32).
Lights when the S. BASS is on (see p. 17).
= CHARACTER display
5 TUNER indicators
MONO:
Shows radio frequency or function (DVD/LD, CD,
etc.) receiver is using .
Lights when the mono mode is set using the
MPX MODE button (see p. 23).
TUNED:
Lights when a broadcast is being received.
STEREO:
Lights when a stereo FM broadcast is being
received in auto stereo mode.
6 EON indicator
When the EON mode is set the EON indicator
with a box around it ligh†s, but during actual
reception of an EON broadcast the EON
indicator will flash. An empty box in the EON
indicator spot means it is possible to pick up an
EON broadcast but the receiver has not been
set to do so (this will only appear when RDS is
switched on).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays & Controls
Rem ote Control
7 CH. SELECT button (see p. 15, 16)
Used to start the process of setting the speaker
levels (see $ below).
SOURCE SELECT
8 RECEIVER STANDBY/ ON button
Use to switch the receiver between on and
standby modes.
SOURCE
DVD
CD
TUNER
0
-
1
2
TV CONT. TAPE
MD
CD-R
$
1
$
!
!
9 FUNCTION button
2
3
4
TV FUNC.
@
5
*
6
&
7
#
8
Use select the playback or recording source.
TV VOL.
EFFECT
CHANNEL
STATION
0 SOURCE SELECT keys
9
0
D. ACCESS
TOP MENU
CLASS
MENU
Use to put the rem ote control (NOT the
receiver) in the stated m ode.
=
~
FQ
3
RF ATT
DISP
For other equipment controls, see Controlling
the Rest of Your System starting on page 34-37.
ENTER
TEST
TONE
MPX
SET UP
!
@
#
$
FQ
4
5
SORROUND
2
DSP MODE MUTING
- CHANNEL/ STATION +/ – buttons (see
p.37)
CH. SELECT
LEVEL
6
7
Use to select the station of memorized
frequencies or change channels on Pioneer-
made TVs.
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
8
9
%
^
= CLASS/ MENU button (see p.27)
Use to switch between the three banks (classes)
of station memories.
~ 2 (RF ATT) 3 (DISP) 5∞( FQ +/ –) &
1 SOURCE (POWER) button
ENTER buttons (see p.13, 14, 23, 35,
This button turns on/off the power for PIONEER
components connected to the VSX-409RDS.
36)
Use these arrow buttons when setting up your
surround sound system (see p. 13-16). These
buttons are also used to control DVD menus/
options and for deck 1 of a double cassette deck
player. The FQ +/– buttons can be used to find
radio frequencies and the RF ATT (see p. 23) and
DISP (see p. 28) buttons have special functions.
2 NUMBER/ PLAYER COMMAND
buttons (see p. 24, 34-37)
Use to select radio frequency in tuner mode.
Also, you can use to contol PIONEER
components like CD players, cassette decks,
etc. according to the comands printed above the
button (4 3 7, etc.)
! MPX/ SETUP button (see p. 23, 35, 36)
Use to switch between auto stereo and mono
reception of FM broadcasts. If the signal is
weak then switching to MONO will improve the
sound quality. In DVD mode this button brings
up the SETUP menus.
3 D.ACCESS/ TOP MENU button (see p.
24, 36)
This button gives you direct access to radio
frequency input, allowing you to input a station
directly. In DVD mode this button brings you to
the top menu.
@ DSP MODE button (see page 22)
Use to switch between the various DSP modes
available (HALL, J AZZ, DANCE, THEATER1,
THEATER2) and DSP off. Use to create different
surround sound effects from any stereo source.
4 TEST TONE button (see p.15, 23&24)
Use this button to hear a test tone from each
speaker in turn to set the relative speaker
volumes. Also switches the BAND in TUNER
mode.
# MUTING button
Use to mute all audio without affecting any of
the current sound settings. If you adjust the
volume the muting is automatically cancelled.
5 SURROUND button (see p.13,15, 20,
22)
Use this button to set up the surround sound
features of the VSX-409RDS. In particular, it's
used to select the type of center mode, turn on/
off subwoofer option and select distance for
each speaker. Also used to start the process of
setting the effect levels
$ LEVEL +/ – buttons
Use to set the relative speaker volumes for all
the speakers in your system (see 7 above).
% MASTER VOLUME +/ – buttons
Use to set the overall listening volume.
6 2 button(see p.15, 20)
Use to select a Dolby Pro Logic mode. Also used
to access Test Tone.
^ FL DIMMER button
Use this button to make the fluorescent display
(FL) dimmer or brighter. There are three
brightness settings and an off setting.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening in Surround Sound
Listening in Dolby Pro Logic Mode
To really appreciate what the VSX-409RDS can do, sit back and experience a movie encoded in Dolby Digital or
Dolby Pro Logic with five speaker surround sound creating theater-like sound effects in your living room. When
choosing software, look out for the
mark on DVD discs, laser discs, and video tapes
(sometimes, unmarked software is also recorded in Dolby Pro Logic).
To enjoy Dolby Digital surround sound from DVD discs, you'll need to have connected your DVD player (or Dolby
Digital decoder) to the receiver's 5.1 channel inputs (see page 9), and set the receiver to DVD 5.1 CH input
mode.
Many video tapes feature Dolby Surround/Pro Logic these days. The VSX-409RDS takes advantage of this to
provide dramatic and realistic surround sound. The effect can be further enhanced by choosing a Pro Logic with
DSP mode. Follow the steps on this page when playing Dolby Surround or Dolby Pro Logic material.
When using any of these modes, it's really important that your speakers are set up correctly (see p.11-12), and
that you've worked through the steps in Setting Up for Surround Sound on pages 13-15.
1 Press 2(DOLBY PRO LOGIC on the receiver).
Pressing repeatedly changes the Pro Logic mode in the following
sequence:
DOLBY
PRO
LOGIC
PRO LOGIC
3 THEATER
1
3
SOURCE SELECT
SOURCE
DVD
CD
TUNER
TV CONT. TAPE
MD
CD-R
PRO LOGIC
THEATER 2
2
$
1
$
!
3
!
SURR OFF
2
2
4
TV FUNC.
@
5
*
6
&
7
#
8
TV VOL.
EFFECT
CHANNEL
STATION
9
0
3
D. ACCESS
TOP MENU
CLASS
MENU
2 Press the SURROUND button.
FQ
RF ATT
DISP
This starts the process of setting the effect level.
ENTER
TEST
TONE
MPX
SET UP
FQ
SORROUND
2
DSP MODE MUTING
3 Use the EFFECT +/ – to adjust the DSP effect
level PRO LOGIC THEATER1 and PRO LOGIC
THEATER2 .
2
1
CH. SELECT
LEVEL
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
You can adjust the effect level within an range of 10–90 (the default
settinig is 50).
•
•
You need to input mode/distance/level settings specifically
for your Pro Logic mode (see p. 13-15).
If you turn the speakers off PRO LOGIC goes off as well.
When you turn the speakers back on, PRO LOGIC will NOT
go back on.
memo
1
•
•
If you try and turn PRO LOGIC on when the speakes are
off, SP OFF will flash on the display, informing you that you
can't turn on PRO LOGIC when the speakers are off.
You can't use the tone controls, the DIRECT function with
PRO LOGIC mode.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening in Surround Sound
Listening in DVD 5.1 Channel Input Mode
Some DVD players feature a built-in Dolby Digital decoder with separate analogue audio outputs for the front left
and right, centre, surround left and right, and sub-woofer channels. Connect these to the 5.1 channel inputs of
the VSX–409RDS for enhanced playback of Dolby Digital material—see page 9 for instructions on connecting
up.5.1 channel mode of the VSX–409RDS provides better surround-channel sound and overall channel
separation than the Dolby Pro Logic mode.
Follow the steps below to use the 5.1 channel mode.
1 Use the FUNCTION button to select DVD 5.1
CH.
SOURCE SELECT
On the receiver, press the DVD 5.1 CH function button to select
SOURCE
DVD
CD
TUNER
the DVD input mode directly.
TV CONT. TAPE
MD
CD-R
On the remote control, repeated presses of the FUNCTION button
switches between 5.1 channel input and the other inputs.
$
1
$
!
3
!
2
4
TV FUNC.
@
5
*
6
&
7
#
8
TV VOL.
EFFECT
CHANNEL
STATION
9
0
D. ACCESS
TOP MENU
CLASS
MENU
FQ
RF ATT
DISP
ENTER
TEST
TONE
MPX
SET UP
•
•
You can input level settings specifically for your 5.1 CH
mode and this will enhance you surround sound experience
(see p. 15).
You can't use the tone controls S.BASS, DIRECT, DSP, or
the PRO LOGIC functions with 5.1 CH mode.
FQ
memo
SORROUND
2
DSP MODE MUTING
CH. SELECT
LEVEL
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
1
1
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening in Surround Sound
Listening in DSP Mode
The DSP (Digital Signal Processing) modes transform your living room into a variety of different sound
environments when playing standard (two channel) stereo sources. Optionally, you can adjust the amount of
effect added to the source. The descriptions below give an idea of what the five different modes sound like, but
the best idea is to play a source and experiment.
DANCE
HALL
Simulates the acoustic environment and strong bass
sound of a dance music club.
Simulates the acoustic environment of a large
classical concert hall. Long delay and reverb decay
times create a sense of music being played in a
large space.
THEATER 1
Simulates the acoustic environment of a mid-sized
movie theater.
J AZZ
Simulates the acoustic environment of a jazz club.
Shorter delay times and a tighter reverb help to give
the sound a live, small club feel.
THEATER 2
Similar to the above but maintains proper
localization of each channel.
1 Select a DSP MODE.
Repeated presses of DSP MODE changes the DSP mode in the
following sequence:
SOURCE SELECT
SOURCE
DVD
CD
TUNER
HALL
3
JAZZ
3 DANCE
3
TV CONT. TAPE
MD
CD-R
DSP
OFF
$
1
$
!
3
!
THEATER 2
THEATER 1
2
2
2
2
4
TV FUNC.
@
5
*
6
&
7
#
8
TV VOL.
EFFECT
CHANNEL
STATION
9
0
3
2
D. ACCESS
TOP MENU
CLASS
MENU
2 Press the SURROUND button.
FQ
RF ATT
DISP
ENTER
TEST
TONE
MPX
SET UP
3 Use the EFFECT +/ – buttons to adjust the
DSP effect level.
FQ
SORROUND
2
DSP MODE MUTING
1
CH. SELECT
LEVEL
You can adjust the effect level within an range of 10–90 (the default
settinig is 50).
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
•
•
All DSP effect levels are independent of each other.
You can input level settings specifically for each DSP mode
and this will enhance your surround sound experience.
If you turn the speakers off, DSP goes off as well.
When the speakers are off you can't use the DSP mode.
You can't use the tone controls, the DIRECT function with
DSP mode.
memo
•
•
•
1
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
Finding a Station
The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and
manual (step) tuning functions. If you already know the exact frequency of the station you want to listen to, see
Tuning Directly to a Station on the following page. Once you are tuned to a station you can memorize the
frequency for recall later—see Memorizing Stations on page 25 for more on how to do this.
1 Use the FUNCTION button to put the receiver
in tuner m ode .
On the receiver, press the FM/ AM button to select the tuner
SOURCE SELECT
SOURCE
DVD
CD
TUNER
mode.
2
TV CONT. TAPE
MD
CD-R
$
1
$
!
3
!
2 Press the TUNER button on the rem ote
control to put the rem ote control in tuner
m ode.
2
4
TV FUNC.
@
5
*
6
&
7
#
8
TV VOL.
EFFECT
CHANNEL
STATION
9
0
D. ACCESS
TOP MENU
CLASS
MENU
FQ
4
RF ATT
DISP
3 Use the TEST TONE button to change the
band (FM or AM), if necessary.
ENTER
RF ATT
TEST
TONE
MPX
SET UP
MPX
FQ
SORROUND
2
DSP MODE MUTING
Each press switches the band between FM and AM (on the front
panel use the FM/AM button).
4
CH. SELECT
LEVEL
3
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
4 Tune to a station.
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
1
Autom atic tuning
To search for stations in the currently selected band, press and hold
either the FQ. + or FQ. – button for about a second. The receiver
will start searching for the next station, stopping when it has found
one. Repeat this step to search for other stations.
Manual tuning
To change the frequency one step at a time, press the FQ. + / FQ.
– (5∞) buttons.
To change frequency more quickly, press and hold the FQ. + / FQ.
– buttons until the desired frequency is reached, then release.
3
RF ATT
1
Once you've found a station, you can store it in the receiver's
memory for easy recall anytime—turn to page 25 for more on this.
MPX m ode
If the TUNED or STEREO indicators don't light when tuning to an FM
station because the signal is weak, press the MPX button to switch the
receiver into mono reception mode. This should improve the sound
quality and allow you to enjoy the broadcast.
RF ATT m ode
If the radio signal is too strong and/or the sound is distorting press the
RF ATT button to attenuate (lower) the radio signal input and reduce the
distortion.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
Tuning Directly to a Station
Sometimes, you'll already know the frequency of the station you want to listen. In this case, you can simply
enter the frequency directly using the number buttons on the remote control (this function is not available using
the front panel controls of the receiver).
1 Use the FUNCTION button to put the receiver
in tuner m ode .
On the receiver, press the FM/ AM button to select the tuner
mode.
SOURCE SELECT
SOURCE
DVD
CD
TUNER
2
5
TV CONT. TAPE
MD
CD-R
2 Press the TUNER button on the rem ote
control to put the rem ote control in tuner
m ode.
$
$
!
3
!
1
2
4
TV FUNC.
@
5
*
6
&
7
#
8
TV VOL.
EFFECT
CHANNEL
STATION
9
0
D. ACCESS
TOP MENU
CLASS
MENU
3 Press the TEST TONE button to select either
FM or AM.
FQ
4
3
RF ATT
DISP
ENTER
TEST
TONE
MPX
SET UP
FQ
Each press switches the band between FM and AM.
On the receiver, pressing the FM/AM button switches between
bands.
SORROUND
2
DSP MODE MUTING
CH. SELECT
LEVEL
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
4 Press D. ACCESS (DIRECT ACCESS).
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
1
5 Use the num ber buttons to enter the
frequency of the radio station.
Exam ple:
To tune to 106.00 (FM), press 1 – 0 – 6 – 0 – 0
TUNED
STEREO
A
SP
1, 3
If you make a mistake while inputting the frequency, press the
D.ACCESS button twice to cancel the frequency and start again.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
Mem orizing Stations (front panel only)
If you often listen to a particular radio station, it's convenient to have the receiver store the frequency for easy
recall whenever you want to listen to that station. This saves the effort of manually tuning in each time. The
VSX-409RDS can memorise up to 30 stations, stored in three banks, or classes(A,B and C) of 10 presets each.
When memorizing FM frequencies, the receiver also stores the MPX setting (auto stereo or mono), and RF ATT
settings. The process for memorizing stations is only possible from the controls on the front panel of the
receiver.
1 Tune to a station you w ant to m em orize.
See Finding a Station and Tuning Directly to a Station on pages 23
and 24 for more on how to do this.
2 Press MEMORY.
The display shows a blinking memory class.
3 2
4
TUNED
STEREO
A
SP
3 Press CLASS to select one of the three
classes.
Repeatedly pressing this button cycles through the three available
classes, A, B and C.
4 Press STATION +/ – to choose the preset
m em ory num ber.
Pressing these buttons repeatedly cycles through the 10 available
preset memories in each class.
After choosing the location you want, the preset class and number
blink for about 5 seconds and the receiver stores the station.
Repeat steps 1 to 4 to m em orize up to 30 stations.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
Nam ing Mem orized Stations (front panel only)
You can input a name of up to four characters for each preset station in the receiver's memory (see the previous
page). This name can be anything you choose. For example, you could input "BBC1" for that station and when
you listen to it the name, rather than the frequency number, will appear on your display.
1 Press FM/ AM to set the tuner function.
2 Press TUNING SELECT to select the STATION
m ode.
3 Press CLASS repeatedly to select the class.
Repeatedly pressing this button cycles through the three available
classes, A, B and C.
3 7 5
4 Press STATION (+/ –) to select the preset
channel.
5 Press CHARACTER/ SEARCH to select the
character input m ode.
6 Press STATION (+/ –) to choose the first
character.
The STATION +/– buttons scroll through the letters, numbers and
symbols you can input.
4, 6 2 1
7 Press MEMORY to input the first of the four
characters.
That character appears in the display and the cursor automatically
moves to the next space.
After four characters have been entered, the character input mode
is exited.
Repeat steps 3 to 7 to m em orize up to 30 preset broadcast
station nam es.
To erase or change the station nam e
Perform the procedures of “Naming Memorized Stations” and enter
four spaces to erase the memorized station name.
When you want to change a memorized station name, input the new
station name using the same procedure.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
Recalling Mem orized Stations
Having memorized up to 30 stations (see the previous page for how to do this), you can quickly recall one of
these stations.
1 Use the FUNCTION button to put the receiver
in tuner m ode .
On the receiver, press the FM/ AM button to select the tuner
mode.
SOURCE SELECT
SOURCE
DVD
CD
TUNER
2
TV CONT. TAPE
MD
CD-R
2 Press the TUNER button on the rem ote
control to put the rem ote control in tuner
m ode.
$
$
!
3
!
1
2
4
TV FUNC.
@
5
*
6
&
7
#
8
TV VOL.
EFFECT
CHANNEL
STATION
4
3
9
0
D. ACCESS
TOP MENU
CLASS
MENU
FQ
3 Press CLASS to select the class in w hich the
station is stored.
RF ATT
DISP
ENTER
TEST
TONE
MPX
SET UP
FQ
Repeatedly pressing this button cycles through the three available
classes, A, B and C.
SORROUND
2
DSP MODE MUTING
CH. SELECT
LEVEL
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
4 Use the STATION +/ – buttons to select the
station m em ory in w hich the station is
stored.
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
1
Alternatively, recall the station memory using the number buttons
on the remote control.
If the receiver is left disconnected from the AC power outlet
memo
for a lengthy period, the station memories will be lost and will
have to be reprogrammed.
3 4
1
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
An Introduction to RDS & EON
Radio Data System, or RDS as it's usually known, is a system used by FM radio stations to provide listeners
with various kinds of information—the name of the station and the kind of show they're broadcasting, for
example. This information shows up as text on the display, and you can switch between the kind of information
shown. Although you don't get RDS information from all FM radio stations, you do with most.
Probably the best feature of RDS is that you can search automatically by type of programme. So, if you felt like
listening to jazz, you could search for a station that's broadcasting a show with the programme type, "JAZZ."
There are around 30 such programme types, including various genres of music, news, sport, talk shows,
financial information, and so on.
The VSX-409RDS receiver lets you display three different kinds of RDS information: Radio Text, Programme
Service Name, and Programme Type.
Radio Text (RT) is messages sent by the radio station. These can be anything the broadcaster chooses—a talk
radio station might give out it telephone number as RT, for example.
Programme Service Name (PS) is the name of the radio station.
Programme Type (PTY) indicates the kind of programme currently being broadcast.
The VSX-409RDS can search for and display the following programme types:
Ne w s
Affa irs
In fo
Current affairs
General inform ation
S p o rt
Ed u c a t e
Dra m a
Educational m aterial
Radio plays or serials
Cu lt u re
S c ie n c e
Va rie d
Science and technology
Usually talk-based m aterial, such as quiz shows or interviews.
Pop m usic
P o p M
Ro c k M
M.O.R. M
Lig h t M
Cla s s ic s
Ot h e r M
We a t h e r
Fin a n c e
Ch ild re n
S o c ia l A
Re lig io n
P h o n e in
Tra ve l
Rock m usic
“Middle of the road” m usic
‘Light’ classical m usic
‘Serious’ classical m usic
Other m usic not fitting any of the above categories
stock m arket reports, com m erce, trading, etc.
Children’s entertainm ent
Social affairs
Holiday-type travel rather than traffic announcem ents.
Leisure interests and hobbies
Le is u re
J a zz
Co u n t ry
Na t io n M
Old ie s
Country m usic
Popular m usic in a language other than English
Popular m usic from the ’50s
Folk m usic
Fo lk M
Do c u m e n t Docum entaries
In addition, there is a programme type, ALARM!, used for exceptional emergency announcements. You can't
search for this, but the tuner will switch automatically to this RDS broadcast signal.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
Using the RDS display
To display the different types of RDS information available (RT, PT and PTY as explained on the previous page),
press TUNER on the remote control and use the DISP button (also marked 3) to cycle through the types of RDS
information.
Each press changes the display as follows.
3
3
3
3
Frequency
PS
RT
PTY
Basics of EON
EON (Enhanced Other Netw ork inform ation)
EON is a function that allows you to set the receiver to switch to a frequency automatically when a programme
featuring traffic information or news is being broadcast. It cannot be used in areas that EON information is not
transmitted and when FM broadcast stations do not transmit PTY data. When the broadcast ends, the tuner
returns to the original frequency or function.
There are tw o types of EON you can set the tuner to:
1) TA (Traffic Announcement)
This mode will set the tuner to pick up traffic information when it is broadcast.
2) NEWS
This mode will set the tuner to pick up news when it is broadcast.
Setting EON allow s autom ated reception of TA/ NEWS broadcasts
When EON is turned on, the receiver will automatically jump to those EON-linked broadcasts. Even if a receiver
function other than the tuner is being used, the receiver function will switch to the FM station automatically
when an EON-linked Traffic Information or News programme begins. When the programme ends, the original
function will be restored. The EON function will not operate, however, when the the tuner is on AM.
The receiver’s internal Program Identification function
PI (Program m e Identification)
This is an identifying marker the tuner automatically attaches to stations stored in your preset memory classes
(see p. 25). The marker distinguishes between stations which transmit RDS data and those that don’t, so that
the receiver knows which stations to look at when searching for RDS or EON transmissions. The code is not
displayed on the reciever and you don’t need to do anything in regards to setting the PI codes.
PI code registration and erasure
The receiver will automatically register a PI code for any station you input into the memory classes (see p. 25)
which can receive RDS or EON data. If you want to have a station preset in your memeory banks but DON’T
want the receiver to search this station for RDS information you can erase the PI code and then the receiver will
ignore this station when searching for RDS transmissions.
To erase PI codes, follow this procedure:
1. When tuned to the station whose PI code you want to erase press the EON MODE button for two seconds
or m ore.
“ERASE PI” will be displayed.
2. Press MEMORY button within 5 seconds.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
Searching for RDS Program m es (front panel only)
One of the most useful features of RDS is the ability to search for a particular kind of radio programme. You can
search for any of the programme types listed on page 27—this covers all kinds of music, as well as news,
weather forecasts, sports programmes, and a variety of others.
1 Put the receiver in FM band by pressing the
FM/ AM button.
RDS is only broadcast on FM.
2 To select the PTY search m ode press the
CHARACTER/ SEARCH button until you see
SEARCH in the display.
If you are on a preset station you’ll have to press the button twice,
if not then one press will bring up the PTY search mode.
3 Use the STATION +/ – buttons to select the
program m e type you w ant to hear.
2
1
4 Press MEMORY search for the program m e
type.
The tuner searches through the FM stations stored in the station
memories.
If the tuner finds a matching programme type, the tuner plays 5
seconds of the station. To listen to that station, press the
CHARACTER/SEARCH button. (The tuner stops searching.)
If you don't press the CHARACTER/SEARCH button during the
above metioned 5 seconds, the tuner resumes the search.
When the tuner finds a programme type you searched for, the
frequency display will blink for about 5 seconds and then the
display will show FINISH briefly.
If NO PTY is displayed it means the tuner couldn’t find that
programme type at the time of the search.
The tuner stops on any station that is broadcasting that
programme type
This function searches RDS stations preset in the 30ch
memo
memory. If this function is set when no stations have been
preset, “NO PTY” will be displayed. If the desired PTY could
not be found amongst the RDS stations in memory, the same
display appears.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
Using EON search (front panel only)
1 Put the receiver in FM band by pressing the
FM/ AM button.
EON is only broadcast on FM.
2 Choose a station stored in the receiver’s
preset m em ory (see p. 25-26).
3 Press the EON MODE button and choose the
EON search you w ant.
There are two EON modes: EON TA and EON NEWS. EON TA will
automatically search for traffic reports and EON NEWS will
automatically search for news reports among your preset stations.
Each press changes the display as follows.
3
3
EON TA
EON NEWS
3
OFF
2
1
3 EON search has been set. If the receiver finds
an EON-linked broadcast it w ill autom atically
jum p to it.
The receiver is set to receive EON information even when it is not
in TUNER mode. If such information is found the receiver will
automatically switch into TUNER mode to pick up the EON
broadcast. When the programme ends the receiver will return to
the original mode.
When the EON mode is set the EON indicator with a box around it
ligh†s, but during actual reception of an EON-linked broadcast the
EON indicator will flash. An empty box in the EON indicator spot
means it is possible to pick up an EON-linked broadcast but the
receiver has not been set to do so (this will only appear when RDS
is switched on).
• The EON mode is cancelled if you switch to AM reception
memo
while setting EON. It starts once again when you return to
FM reception.
• Simultaneous requests for Traffic Information (TA) and News
programmes is not possible.
• You cannot operate the MEMORY and CHARACTER/
SEARCH buttons while the EON indicator lights.
• Functions other than TUNER cannot be changed while the
EON indicator flashes (while receiving on EON-linked
broadcast).
If you want to change to a function other than TUNER, press
the EON MODE button and turn the EON mode off.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a Recording
Making an Audio Recording
The following steps show you how to make an audio recording from the built in tuner, or from an audio source
connected to the receiver (such as a CD player or MD player). Recordings can be made to a CD-Recorder,
cassette deck or MD deck connected to the CD-R/TAPE/MD in/out connectors.
The receiver's volume, channel levels, tone (bass, treble), S.bass, and surround effects (Dolby
Pro Logic and DSP settings) have no effect on the recorded signal.
memo
1 Press the FUNCTION button to select a
source to record.
SOURCE SELECT
All functions except MONITOR are accessible from the remote
SOURCE
DVD
CD
TUNER
control.
TV CONT. TAPE
MD
CD-R
On the receiver, select the source directly using the front panel
buttons.
$
1
$
!
3
!
2
4
TV FUNC.
@
5
*
6
&
7
#
8
TV VOL.
EFFECT
CHANNEL
STATION
2 Prepare the program m e source.
9
0
D. ACCESS
TOP MENU
CLASS
MENU
Tune to the radio station, load the CD, etc.
FQ
RF ATT
DISP
ENTER
TEST
TONE
MPX
SET UP
3 Insert a blank CD-R, MD, tape etc. into the
recording device connected to either CD-R/
TAPE/ MD and set the recording levels.
FQ
SORROUND
2
DSP MODE MUTING
CH. SELECT
LEVEL
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
Refer to the instructions that came with the recorder if you are
unsure how to do this.
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
1
4 Start recording, then start playback of the
source com ponent.
1
MONITOR
Record MONITOR
You can listen to (monitor) the recording as it's being made using the
MONITOR button on the Front Panel (a cassette deck would have to
have a record monitor function).
Press the MONITOR button to switch between the recorded signal and
the original source signal.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a Recording
Making a Video Recording
The following steps show you how to make a video recording from a video source connected to the receiver,
such as a DVD player, LD player, etc., to a video deck connected to the VCR/ DVR connectors.
The receiver's volume, channel levels, tone (bass, treble), S. bass, and surround effects (Dolby
Pro Logic and DSP settings) have no effect on the recorded audio signal.
memo
1 Press the FUNCTION button to select a
source to record.
SOURCE SELECT
On the receiver, select the source directly using the front panel
SOURCE
DVD
CD
TUNER
buttons.
TV CONT. TAPE
MD
CD-R
$
$
!
!
1
2
3
4
2 Prepare the program m e source.
TV FUNC.
@
5
*
6
&
7
#
8
Load the DVD, LD, etc.
TV VOL.
EFFECT
CHANNEL
STATION
9
0
D. ACCESS
TOP MENU
CLASS
MENU
FQ
3 Insert a blank tape or DVR into the VCR/ DVR
and set the audio recording level (if
applicable).
RF ATT
DISP
ENTER
TEST
TONE
MPX
SET UP
FQ
SORROUND
2
DSP MODE MUTING
Most video recorders set the audio recording level automatically—
check your video's instruction manual if you are unsure whether
yours has manual controls.
CH. SELECT
LEVEL
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
1
1
4 Start recording on the VCR/ DVR, then start
playback from the source com ponent.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
CD/ MD/ CD-R Player Controls
The following controls are available from the receiver's remote if your CD, MD or CD-R player is
made by Pioneer.
memo
To control your CD, MD or CD-R player with this remote control, first put the remote into CD, MD
or CD-R mode with the proper SOURCE SELECT button (i.e. the CD, MD, or CD-R button).
1 Use SOURCE SELECT buttons to
put the rem ote control in the
stated m ode.
1
SOURCE SELECT
2 SOURCE (pow er)
SOURCE
DVD
CD
TUNER
Press to switch the CD, MD or CD-R player
2
3
TV CONT. TAPE
MD
CD-R
between STANDBY and ON.
$
1
$
!
3
!
7
3 4
2
4
TV FUNC.
Press to return to the start of the current track.
Repeated presses skips to the start of previous
tracks.
@
5
*
6
&
7
#
8
8
9
0
4
5
6
TV VOL.
EFFECT
CHANNEL
STATION
9
0
D. ACCESS
TOP MENU
CLASS
MENU
4 ¢
FQ
Press to advance to the start of the next track.
Repeated presses skips to the start of following
tracks.
RF ATT
DISP
ENTER
TEST
TONE
MPX
SET UP
FQ
-
SORROUND
2
DSP MODE MUTING
5 2
This button has no function.
CH. SELECT
LEVEL
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
6 8
Press to pause playback.
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
7 ¡
Hold down for fast forward playback.
8 1
Hold down for fast reverse playback.
9 3
Press to start playback.
0 7
Press to stop playback (on some models,
pressing this when the disc is already stopped
will cause the disc tray to open).
- MPX/ SETUP(MENU)
(MD players only)
Use to change discs in MD decks that can play
multiple discs.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
Cassette Deck Controls
The following controls are available from the receiver's remote if your cassete deck is made by
Pioneer.
memo
To control your cassette deck with this remote control, first put the remote into the TAPE mode
with the TAPE SOURCE SELECT button.
For regular cassette decks use buttons 3-0 below for the tape control functions. For double
deck models, use buttons 3-0 to control deck 2 and buttons --= to control deck 1.
1 Use SOURCE SELECT buttons to
1
put the rem ote control in the
stated m ode.
SOURCE SELECT
SOURCE
DVD
CD
TUNER
2
3
2 SOURCE (pow er)
TV CONT. TAPE
MD
CD-R
Press to switch the cassette deck between
STANDBY and ON (not possible on all models).
$
$
!
3
!
7
1
2
4
TV FUNC.
@
*
&
#
3 4
8
9
0
4
5
6
5
6
7
8
This button has no function in cassette deck
mode.
TV VOL.
EFFECT
CHANNEL
STATION
9
0
D. ACCESS
TOP MENU
CLASS
MENU
FQ
4 ¢
This button has no function in cassette deck
mode.
RF ATT
DISP
ENTER
-
=
TEST
TONE
MPX
SET UP
FQ
5 2
SORROUND
2
DSP MODE MUTING
Press to start playback of reverse side of tape
(auto reverse models only).
CH. SELECT
LEVEL
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
6 8
Press to pause playback or recording.
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
7 ¡
Press to fast forward the tape. Pressing during
playback starts forward search.
8 1
Press to rewind the tape. Pressing during
playback starts reverse search.
9 3
Press to start playback.
0 7
Press to stop playback.
- 5 : Press to fast forward the tape. Pressing
during playback starts forward search.
∞ : Press to rewind the tape. Pressing during
playback starts reverse search.
ENTER : PRESS TO STOP PLAYBACK, ETC.
2 : Press to start playback of reverse side of
tape (auto- reverse models only).
3 : Press to start playback.
= MPX/ SETUP(8)
Press to pause playback or recording.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
DVD Player Controls
The following controls are available from the receiver's remote if your DVD player is made by
Pioneer.
memo
To control your DVD player with this remote control, first put the remote into DVD mode with the
DVD SOURCE SELECT button.
6 8
Press to pause playback (on some models this
will freeze-frame the picture).
1
7 Num ber buttons
For other DVD models:
SOURCE SELECT
Use the number buttons to navigate the on-
SOURCE
DVD
CD
TUNER
screen display:
2
3
TV CONT. TAPE
MD
CD-R
8 TOP MENU
$
$
!
3
!
0
Use to display or close the top menu screen
1
2
4
TV FUNC.
@
*
&
#
-
=
~
4
5
6
9 AUDIO
5
6
7
8
TV VOL.
EFFECT
CHANNEL
STATION
Press repeatedly to select one of the audio
languages and or audio formats programmed on
a DVD.
9
0
D. ACCESS
TOP MENU
CLASS
MENU
FQ
!
@
#
7
8
RF ATT
DISP
0 ¡
ENTER
TEST
TONE
MPX
SET UP
Hold down for fast forward playback.
FQ
SORROUND
2
DSP MODE MUTING
- 1
9
Hold down for fast reverse playback.
CH. SELECT
LEVEL
FL
DIMMER
MASTER
VOLUME
= 3
RECEIVER FUNCTION
Press to start playback (on some models,
pressing this when the disc tray is empty will
cause the disc tray to open).
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
~ 7
Press to stop playback (on some models,
pressing this when the disc is already stopped
will cause the disc tray to open).
1 Use SOURCE SELECT buttons to
put the rem ote control in the stated
m ode.
! MENU
Displays menus for adjusting default settings of
picture quality, etc.
2 SOURCE (pow er)
Press to switch the DVD/LD player between
STANDBY and ON.
@ 5 : up
∞ : down
ENTER
2 : left
3 : right
3 4
Press to return to the start of the current
chapter (track). Repeated presses skips to the
start of previous tracks.
# SET UP
Press when the player is in either play or stop
mode to open and close the Setup screen.
4 ¢
Press to advance to the start of the next chapter
(track). Repeated presses skips to the start of
following tracks.
5 2
Use to switch the language on discs that feature
multi-lingual soundtracks (on some models this
will switch the angle).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the Rest of Your System
TV Controls
The following controls are available from the receiver's remote if your TV is made by Pioneer.
To control your TV with this remote control, first put the remote into TV mode with the TV CONT
SOURCE SELECT button.
memo
1
2
1 Use SOURCE SELECT buttons to
put the rem ote control in the stated
m ode.
SOURCE SELECT
SOURCE
DVD
CD
TUNER
TV CONT. TAPE
MD
CD-R
2 SOURCE (pow er)
Press to switch the TV or CATV between
STANDBY and ON.
$
1
$
!
!
2
3
4
TV FUNC.
@
*
&
#
3
4
5
6
7
8
3 TV FUNC. (TV only)
Press to switch the TV input (not possible with
all models).
TV VOL.
EFFECT
CHANNEL
STATION
9
0
5
D. ACCESS
TOP MENU
CLASS
MENU
FQ
4 TV VOL +/ –
RF ATT
DISP
ENTER
Use to adjust the TV volume.
TEST
TONE
MPX
SET UP
FQ
5 CHANNEL +/ –
SORROUND
2
DSP MODE MUTING
Use to select channels.
CH. SELECT
LEVEL
FL
DIMMER
MASTER
VOLUME
RECEIVER FUNCTION
AV MULTI-CHANNEL RECEIVER
REMOTE CONTROL UNIT
Î
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Inform ation
Troubleshooting
Incorrect operation is often mistaken for trouble and malfunctions. If you think that there is something wrong
with this component, check the points below. Sometimes the trouble may lie in another component. Investigate
the other components and electrical appliances being used. If the trouble cannot be rectified even after
exercising the checks listed below, ask your nearest Pioneer authorized service center or your dealer to carry out
repair work.
Sym ptom
Cause
Rem edy
The power does not turn on.
•
•
The power plug is disconnected.
•
•
Connect the power plug to the
wall outlet.
Disconnect the power plug from
the outlet, and insert again.
The protection circuit may have
activated.
The unit does not respond when the
buttons are pressed.
•
•
Static electricity caused by dry
air.
•
•
Disconnect the power plug from
the outlet, and insert again.
No sound is output when a function
is set.
Improper connections.
Make sure the component is
connected correctly (see pages
7 through 11).
•
Sound is muted.
•
Press MUTING on the remote
control.
•
•
The volume is turned down.
Speakers are turned off.
•
•
Adjust MASTER VOLUME.
Press SPEAKERS to switch on the
speakers.
•
•
Monitor is on.
•
•
Press the MONITOR button.
No image is output when a function
is set.
Improper connections.
Make sure the component is
connected correctly (see pages
7 through 11).
•
The input source is not properly
selected.
•
Press the correct function button.
•
•
Incorrect frequency.
The antenna is not connected.
•
•
Tune in the correct frequency.
Connect the antenna (see page 7).
Considerable noise in radio broad-
casts
FM broadcasts
•
The FM antenna is not fully
extended or poorly positioned.
•
Fully extend the FM wire
antenna, position for best
reception, and secure to a wall.
Connect an outdoor FM antenna.
(see page 7).
•
•
Weak radio signal.
•
•
Interfering radio waves causing
distortion.
Press RF ATT button.
AM broadcasts
•
•
•
The AM antenna is poorly
positioned.
Weak radio signal.
•
•
•
Adjust the direction and position
for best reception.
Connect an additional internal or
external AM antenna (see page 7).
Turn off the equipment causing
the noise or move it away from
the receiver.
Inte rfe re nce caus e by othe r
e quipm e nt (fluore s ce nt lam p,
motor, etc.).
•
Place the antenna farther away
from the equipment causing the
noise.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Inform ation
Rem edy
Sym ptom
Cause
Broadcast stations cannot be se-
lected automatically.
•
•
Weak radio signal.
•
•
Connect an outdoor antenna (see
page 7).
No sound from surround or center
speakers.
Incorrect center mode.
Set the correct center mode
according to the speakers in your
system (see page 13).
•
•
The surround and/or center levels
are turned down.
•
•
Se e Se tting Volum e Le ve ls on
page 15-16 to check the speaker
levels.
Connect the speakers (see pages
11-12).
The s urround and/or ce nte r
speakers are disconnected.
Cannot be remote controlled.
•
•
The remote control unit batteries
have worn out.
Too far aw ay or bad angle of
operation.
•
•
Replace the batteries (see page
6).
Operate within 7 m, 30° of the
remote sensor on the front panel
(see page 6).
•
•
There is an obstacle between the
receiver and the remote control.
•
•
Remove the obstacle or operate
from another position.
Strong light such as fluorescent
light is shining onto the unit's
re m ote control s ignal light-
receiving window.
Avoid exposing the remote sensor
on the front panel to direct light.
If the unit does not operate norm ally due to external effects such as static electricity
¶ Disconnect the power plug from the outlet and insert again to return to norm al operating conditions.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Inform ation
Specifications
Continuous Power Output
AM Tuner Section
Front ................ 80 W + 80 W (DIN,1kHz, 0.9 % , 8 Ω)
Center .......................... 80 W (DIN,1kHz, 0.9 % , 8 Ω)
Surround ......... 80 W + 80 W (DIN,1kHz, 0.9 % , 8 Ω)
÷ Above specifications are for when power supply is
230 V.
Frequency Range ..................... 531 kHz to 1,602 kHz
Sensitivity (IHF, Loop antenna) .................... 350 µV/m
Selectivity .......................................................... 30 dB
Signal-to-Noise Ratio ......................................... 50 dB
Antenna ................................................ Loop antenna
Miscellaneous
Input (Sensitivity/Impedance)
Power Requirements ........... AC 220-230 V, 50/60 Hz
Power Consumption ........................................ 220 W
In Standby Condition ............................................ 1 W
Dimensions ............. 420 (W) x 158 (H) x 391 (D) mm
Weight (without package) ................................ 8.4 kg
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD, TV/SAT
........................................................ 200 mV/47 kΩ
Frequency Response
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD, TV/SAT
................................................. 5 Hz to 100,000 Hz
Output (Level/Impedance)
Furnished Parts
VCR/DVR REC, CD-R/TAPE/MD REC
FM Wire Antenna ..................................................... 1
AM Loop Antenna .................................................... 1
Dry Cell Batteries
size "AA" (IEC R6P) ............................................... 2
Remote Control Unit ................................................ 1
Operating Instructions ............................................. 1
....................................................... 200 mV/2.2 kΩ
Tone Control
BASS ............................................. ± 6 dB (100 Hz)
TREBLE .......................................... ± 6 dB (10 kHz)
S.BASS .......................................... + 8 dB (100 Hz)
Signal-to-Noise Ratio [DIN(Rated power output/50 mW)]
CD, VCR/DVR, CD-R/TAPE/MD, DVD/LD, TV/SAT
........................................................... 88 dB/64 dB
NOTE:
Specifications and the design are subject to possible
modifications without notice, due to improvements.
Video Section
Input (Sensitivity/Impedance)
VCR, DVD/LD, TV/SAT ......................... 1 Vp-p/75 Ω
Output (Level/Impedance)
VCR ..................................................... 1 Vp-p/75 Ω
Frequency Response
VCR, DVD/LD, TV/SAT → MONITOR
+0
............................................... 5 Hz to 7 MHz dB
–3
MAINTENANCE
SURFACES
OF
EXTERNAL
Signal-to-Noise Ratio ......................................... 55 dB
Cross Talk .......................................................... 55 dB
¶ Use a polishing cloth or dry cloth to wipe off dust
FM Tuner Section
and dirt.
Frequency Range .................... 87.5 MHz to 108 MHz
Usable Sensitivity
.......................... Mono:15.2 dBf, IHF (1.6 µV/75 Ω)
50 dB Quieting Sensitivity ................. Mono: 20.2 dBf
Stereo: 41.2 dBf
Signal-to-Noise Ratio ............ Mono: 76 dB (at 85 dBf)
Stereo: 72 dB (at 85 dBf)
Distortion ................................. Stereo: 0.6 % (1 kHz)
Alternate Channel Selectivity ............ 70 dB (400 kHz)
Stereo Separation ................................. 40 dB (1 kHz)
Frequency Response ........... 30 Hz to 15 kHz (±1) dB
Antenna Input ................................. 75 Ω unbalanced
Sensitivity (DIN) .................. Mono: 1.1 uV(S/N 26dB)
Stereo 50 uV(S/N 46dB)
¶ When the surfaces are very dirty, wipe with a soft
cloth dipped in som e neutral cleanser diluted five
or six tim es with water, and wrung out well, and
then wipe again with a dry cloth. Do not use
furniture wax or cleaners.
¶ Never use thinners, benzene, insecticide sprays
or other chem icals on or near this unit, since
these will corrode surfaces.
Signal-to-Noise Ratio (DIN) ..................... Mono: 62dB
Stereo: 58dB
Published by Pioneer Electronic Corporation.
Copyright © 1999 Pioneer Electronic Corporation.
All rights reserved.
PIONEER ELECTRONIC CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS [USA] INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A.
PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada
PIONEER ELECTRONIC [EUROPE] N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: 03-9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. San Lorenzo Num 1009 3er piso Desp. 302 Col. Del Valle, Mexico D.F. C.P. 03100 TEL: 5-688-52-90
<99F00ZF0P00>
Printed in
<ARB7200-A>
Download from Www.Somanuals.com. All Manuals Search And Download.
|