Operating Instructions
N-50
N-50-K
N-50-S
Driver software for USB D/A Converter Functionality
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Click on [Next].
5
Click on [Finish].
The driver installation is completed.
4
Click on [Install].
6
1
Reboot your computer to finalize installation of the driver.
Procedure finished.
To uninstall the driver
Click on the [Start] button at lower left of your monitor screen, then click on
t
([Settings]
) [Control Panel].
2
3
From the Control Panel menu, click on [Add or Remove Programs].
Select [Pioneer USB Audio Device] and click [Remove].
The uninstaller dialog will appear.
The following screen will appear; wait until the step 5 instructions appear.
4
5
Click [Next] to execute the uninstall process.
The driver software will be uninstalled.
Reboot your computer.
Procedure finished.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Click on [Sound, video and game controllers] and confirm that [Pioneer USB
Audio Device] is listed.
Troubleshooting (Windows XP)
When using Windows Vista, see page 6 ; for Windows 7, see page 10 ; for Mac OS X, see page 14.
1. No sound
In the event the N-50’s power is set to Standby, or the source input is set to something other
than Digital In USB, do not start your computer’s media player software. Change the input to
Digital In USB before starting your computer’s media player.
t
t
t
1
2
3
Click on [Start]
([Settings]
) [Control Panel]
[System].
Click on the [Hardware] tab then click on [Device Manager].
Click on [Universal Serial Bus controllers] and confirm that [USB Composite
Device] is listed.
If the above devices are not listed as described, confirm that the N-50’s input source is set
to Digital In USB, then either disconnect and reconnect the USB cable, or set the power to
Standby then turn it On again.
t
t
t
t
5
6
Click on [Start]
Audio Devices]
([Settings]
) [Control Panel]
[Sound, Speech, and
[Sounds and Audio Devices].
Open the sound and audio Properties.
Procedure continues.
Procedure continues.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Click on the [Audio] tab, then confirm that [Pioneer USB Audio Device] is
listed as the [Default device] for [Sound playback].
2. To disable the operating system’s sound scheme
t
Under default OS settings, computer events may be accompanied by audio signals and beeps
that are audible through the speakers attached to the N-50. In the event you do not wish to hear
such non-music signals, follow the instructions listed below:
If another device has been selected, open the drop-down menu and select [Pioneer USB
Audio Device], then click on [Apply] to change the selection.
t
t
1
Click [Start]
[Control Panel]
[Sounds and Audio Devices].
2
Click on the [Sounds] tab, and for the [Sound scheme], select [No Sounds],
then click on [Apply].
8
9
To enable the new setting, reboot your computer.
Confirm that your media player’s sound volume is set to Maximum.
In the event your media player requires an output plugin setting, confirm that [Pioneer USB
Audio Device] is selected.
Procedure finished.
Procedure finished.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Click on [Sound, video and game controllers] and confirm that [Pioneer USB
Audio Device] is listed.
Troubleshooting (Windows Vista)
When using Windows XP, see page 4; for Windows 7, see page 10; for Mac OS X, see page 14
.
1. No sound
In the event the N-50’s power is set to Standby, or the source input is set to something other
than Digital In USB, do not start your computer’s media player software. Change the input to
Digital In USB before starting your computer’s media player.
t
t
t
1
2
Click on [Start]
[Control Panel]
[System and Maintenance]
[System].
From the [Tasks] list, click on [Device Manager].
4
Click on [Universal Serial Bus controllers] and confirm that [USB Composite
Device] is listed.
Procedure continues.
If the above devices are not listed as described, confirm that the N-50’s input source is set
to Digital In USB, then either disconnect and reconnect the USB cable, or set the power to
Standby then turn it On again.
Procedure continues.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
t
t
t
5
6
Click on [Start]
[Control Panel]
[Hardware and Sound]
[Sound].
8
Under the [Levels] tab, set the [Speakers] level to maximum.
If the Speaker Mute indicator (at the left side of the Balance button) is lighted, click it to turn
it off.
Under the [Playback] tab, confirm that for [Speakers], [Pioneer USB Audio
Device] is checked as the default device.
t
If another device has been selected, select [Pioneer USB Audio Device], and click to [Set
Default].
Speakers
9
Confirm that your media player’s sound volume is set to Maximum.
In the event your media player requires an output plugin setting, confirm that [Pioneer USB
Audio Device] is selected.
7
Double click on [Speakers] ([Pioneer USB Audio Device]), and display its
Properties.
Procedure finished.
Procedure continues.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2. To disable the operating system’s sound scheme
3. To set the sampling frequency for audio data output from your computer
Under default OS settings, computer events may be accompanied by audio signals and beeps
that are audible through the speakers attached to the N-50. In the event you do not wish to hear
such non-music signals, follow the instructions listed below:
By synchronizing the sampling frequency of playback files with the transmission sampling rate,
sound can be transmitted without the need for frequency conversion.
When a high sampling frequency is set on a computer with inadequate processing capacity,
audio playback may be disrupted. In this event, the bit rate and frequency should be set to low
values such as 2-channel, 24-bit, 44100 Hz.
t
t
t
1
2
Click [Start]
[Control Panel]
[Hardware and Sound]
[Sound].
Click on the [Sounds] tab, and for the [Sound scheme], select [No Sounds],
then click on [Apply].
t
t
t
1
2
Click on [Start]
[Control Panel]
[Hardware and Sound]
[Sound].
Under the [Playback tab], for [Speakers], double click on [Pioneer USB Audio
Device] to display the Properties.
Procedure finished.
Procedure continues.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Under the [Advanced] tab, select for [Default Format] the desired output
sampling rate, then click on [Apply].
Procedure finished.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Click on [Universal Serial Bus controllers], and confirm that [USB Composite
Device] is listed.
Troubleshooting (Windows 7)
When using Windows XP, see page 4; for Windows Vista, see page 6; for Mac OS X, see page 14
.
1. No sound
In the event the N-50’s power is set to Standby, or the source input is set to something other
than Digital In USB, do not open your computer’s media player software. Change the input to
Digital In USB before starting your computer’s media player.
t
t
1
2
3
Click on [Start]
[Control Panel]
[System and Security].
Under [System], click on [Device Manager].
Click on [Sound, video and game controllers] and confirm that [Pioneer USB
Audio Device] is listed.
If the above devices are not listed as discribed, confirm that the N-50’s input source is set to Digital
In USB, then either disconnect and reconnect the USB cable, or set the power to Standby then turn
it On again.
t
t
t
5
Click on [Start]
[Control Panel]
[Hardware and Sound]
[Sound].
Procedure continues.
Procedure continues.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Under the [Playback] tab, confirm that for [Speakers], [Pioneer USB Audio
Device] is checked as the [Default Device].
8
Under the [Levels] tab, set the [Speakers] level to maximum.
If the Speaker Mute indicator (at the left side of the Balance button) is lighted, click it to turn
it off.
t
If another device has been selected, select [Pioneer USB Audio Device], and click on [Set
Default].
Speakers
9
Confirm that your media player’s sound volume is set to Maximum.
7
Double click on [Speakers] ([Pioneer USB Audio Device]), and display its
Properties.
In the event your media player requires an output plugin setting, confirm that [Pioneer USB
Audio Device] is selected.
Procedure finished.
Procedure continues.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2. To disable the operating system’s sound scheme
3. To set the sampling frequency for audio data output from your computer
Under default OS settings, computer events may be accompanied by audio signals and beeps
that are audible through the speakers attached to the N-50. In the event you do not wish to hear
such non-music signals, follow the instructions listed below:
By synchronizing the sampling frequency of playback files with the transmission sampling rate,
sound can be transmitted without the need for frequency conversion.
When a high sampling frequency is set on a computer with inadequate processing capacity,
audio playback may be disrupted. In this event, the bit rate and frequency should be set to lower
values such as 2-channel, 24-bit, 44100 Hz.
t
t
t
1
2
Click [Start]
[Control Panel]
[Hardware and Sound]
[Sound].
Click on the [Sounds] tab, and for the [Sound scheme], select [No Sounds],
then click on [Apply].
t
t
t
1
2
Click on [Start]
[Control Panel]
[Hardware and Sound]
[Sound].
Under the [Playback] tab, for [Speakers], double click on [Pioneer USB Audio
Device] to display the Properties.
Procedure finished.
Procedure continues.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Under the [Advanced] tab, select for [Default Format] the desired output
sampling rate, then click on [Apply].
Procedure finished.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2. To disable the operating system’s sound scheme
Troubleshooting (Mac OS X)
Under default OS settings, computer events may be accompanied by audio signals and beeps
that are audible through the speakers attached to the N-50. In the event you do not wish to hear
such non-music signals, follow the instructions listed below:
When using Windows XP, see page 4; for Windows Vista, see page 6; for Windows 7, see page 10
.
1. No sound
t
1
2
Click [System Preferences…]
[Sound].
In the event the N-50’s power is set to Standby, or the source input is set to something other
than Digital In USB, do not start your computer’s media player software. Change the input to
Digital In USB before starting your computer’s media player
Click on [Sound Effects] tab, and for the item [Selected sound output
device], click [Internal Speakers].
t
1
2
Click on [System Preferences…]
[Sound].
Select the [Output] tab, then under [Select a device for sound output], select
[Pioneer USB Audio Device].
3
Select the [Output] tab, and for the item [Select a device for sound output],
click on [Pioneer USB Audio Device].
If the above devices are not listed as described, confirm that the N-50’s input source is set
to Digital In USB, then either disconnect and reconnect the USB cable, or set the power to
Standby then turn it On again.
Procedure finished.
Procedure finished.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Select [Pioneer USB Audio Device].
3. To set the sampling frequency for audio data output from your computer
Select the bit rate and sampling frequency for the desired audio file.
By synchronizing the sampling frequency of playback files with the transmission sampling rate,
sound can be transmitted without the need for frequency conversion.
t
t
t
1
Click on [Finder]
[Applications]
[Utilities]
[Audio MIDI Setup].
2
3
Procedure finished.
Procedure continues.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2011 PIONEER CORPORATION.
All rights reserved.
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
PIONEER ELECTRONICS (USA) INC.
P. O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901, 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
5 Arco Lane, Heatherton, Victoria, 3202, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270
K002_B3_En
<ARB7465-A>
Download from Www.Somanuals.com. All Manuals Search And Download.
|