DVD/CD Receiver
XV-DV313
Speaker System
S-DV313
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Australian model:
VENTILATION:
European, UK, Australian, New Zealand,
Hong Kong and Taiwanese models:
ENERGY STAR® and the
ENERGY STAR
certification mark are
registered US marks.
When installing this unit, make sure to
leave space around the unit for ventilation
to improve heat radiation (at least 10 cm at
top, 10 cm at rear, and 10 cm at each side).
K001B_En
Energy-saving design
All other models:
This system is designed to use 0.39 W of
When installing this unit, make sure to
leave space around the unit for ventilation
to improve heat radiation (at least 20 cm at
top, 15 cm at rear, and 15 cm at each side).
electricity when power is switched to standby.
CAUTION: THE STANDBY/ON BUTTON IS
SECONDARY CONNECTED AND THEREFORE
DOES NOT SEPARATE THE UNIT FROM MAINS
POWER IN STANDBY POSITION. therefore install
the unit suitable places easy to disconnect the
MAINS plug in case of the accident. The MAINS
plug of unit should be unplugged from the wall
socket when left unused for a long period of
WARNING: Slots and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product
and to protect it from overheating, to
prevent fire hazard, the openings should
never be blocked and covered with items,
such as newspapers, table-cloths, curtains,
etc. Also do not put the apparatus on the
thick carpet, bed, sofa, or fabric having a
time.
H017B_En
thick pile.
H040 En
Operating Environment
H045_En
Operating environment temperature and
humidity:
+5ºC – +35ºC (+41ºF – +95ºF); less than 85%RH
(cooling vents not blocked)
Do not install in the following locations
÷ Location exposed to direct sunlight or strong
÷ artificial light
÷ Location exposed to high humidity, or poorly
ventilated location
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for buying this Pioneer product.
Please read through these operating instructions so that you will know how to operate your
model properly. After you have finished reading the instructions, put them in a safe place for
future reference.
Contents
01 Before you start
04 Home theater sound
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Introduction to home theater . . . . . . . . . . . 8
General disc compatibility . . . . . . . . . . . . . 8
CD-R/RW compatibility . . . . . . . . . . . . . . 9
DVD-R/RW compatibility . . . . . . . . . . . . . 9
PC-created disc compatibility . . . . . . . . . 9
About WMA. . . . . . . . . . . . . . . . . . . . . . . 9
Compressed audio compatibility . . . . . . 10
JPEG file compatibility . . . . . . . . . . . . . . 10
Auto listening mode . . . . . . . . . . . . . . . . .29
Listening in surround sound . . . . . . . . . . .29
Dolby Pro Logic II Music settings . . . . . .30
Listening in stereo . . . . . . . . . . . . . . . . . . .30
Listening with headphones . . . . . . . . . . . .31
Using the Advanced Surround effects . . . .31
Adjusting the Advanced Surround
effect level. . . . . . . . . . . . . . . . . . . . . . . .32
Enhancing dialogue . . . . . . . . . . . . . . . . .32
Listening with a virtual surround back
speaker . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Using Quiet and Midnight
listening modes. . . . . . . . . . . . . . . . . . . . .33
Adjusting the bass and treble . . . . . . . . . .33
Boosting the bass level . . . . . . . . . . . . . . .34
Muting the sound . . . . . . . . . . . . . . . . . . .34
02 Controls and displays
Front panel. . . . . . . . . . . . . . . . . . . . . . . . 11
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Remote control . . . . . . . . . . . . . . . . . . . . 14
03 Getting started
Switching on and setting up. . . . . . . . . . . 17
Setting the clock . . . . . . . . . . . . . . . . . . 18
Setting up the remote to control
05 Playing discs
Introduction. . . . . . . . . . . . . . . . . . . . . . . .35
Using the Disc Navigator to browse the
your TV. . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using the Room Setup . . . . . . . . . . . . . . . 19
Using the on-screen displays . . . . . . . . . . 20
Playing discs . . . . . . . . . . . . . . . . . . . . . . 21
Basic playback controls. . . . . . . . . . . . . 22
Resume and Last Memory . . . . . . . . . . . 23
DVD-Video disc menus . . . . . . . . . . . . . 24
Video CD/Super VCD PBC menus . . . . . 25
Listening to the radio . . . . . . . . . . . . . . . . 26
Improving poor FM reception. . . . . . . . . 27
Memorizing stations . . . . . . . . . . . . . . . 27
Listening to station presets . . . . . . . . . . 28
Listening to other sources . . . . . . . . . . . . 28
contents of a disc . . . . . . . . . . . . . . . . . . .35
Scanning discs . . . . . . . . . . . . . . . . . . . . .36
Playing in slow motion . . . . . . . . . . . . . . .36
Frame advance/frame reverse . . . . . . . . . .37
Looping a section of a disc . . . . . . . . . . . .37
Using repeat play. . . . . . . . . . . . . . . . . . . .38
Using the OSD . . . . . . . . . . . . . . . . . . . .38
Using the front panel display. . . . . . . . . .39
Using random play . . . . . . . . . . . . . . . . . .39
Using the OSD . . . . . . . . . . . . . . . . . . . .39
Creating a program list . . . . . . . . . . . . . . .40
Using the OSD . . . . . . . . . . . . . . . . . . . .40
Using the front panel display. . . . . . . . . .42
Clearing the program list . . . . . . . . . . . .43
Searching a disc . . . . . . . . . . . . . . . . . . . .43
Switching subtitles . . . . . . . . . . . . . . . . . .44
Switching the DVD audio language . . . . . .44
4
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching VR format DVD-RW
audio channel . . . . . . . . . . . . . . . . . . . . . 44
Switching the Video CD/Super VCD
audio channel . . . . . . . . . . . . . . . . . . . . . 44
Zooming the screen . . . . . . . . . . . . . . . . . 45
Switching camera angles. . . . . . . . . . . . . 45
Displaying disc information . . . . . . . . . . . 45
OSD disc information . . . . . . . . . . . . . . 45
Front panel display information . . . . . . . 46
Language settings. . . . . . . . . . . . . . . . . . .62
Audio Language . . . . . . . . . . . . . . . . . . .62
Subtitle Language. . . . . . . . . . . . . . . . . .63
DVD Menu Language . . . . . . . . . . . . . . .63
Subtitle Display. . . . . . . . . . . . . . . . . . . .64
Display settings. . . . . . . . . . . . . . . . . . . . .64
OSD Language . . . . . . . . . . . . . . . . . . . .64
On Screen Display . . . . . . . . . . . . . . . . .64
Angle Indicator . . . . . . . . . . . . . . . . . . . .64
Options . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Parental Lock . . . . . . . . . . . . . . . . . . . . .64
PhotoViewer . . . . . . . . . . . . . . . . . . . . . . .67
06 Viewing JPEG discs
Playing a JPEG slideshow . . . . . . . . . . . . 48
Using the JPEG Disc Navigator and
12 Other connections
Photo Browser . . . . . . . . . . . . . . . . . . . . . 48
Zooming the screen . . . . . . . . . . . . . . . . . 49
Connecting external antennas. . . . . . . . . .68
Connecting auxiliary components . . . . . . .68
Reducing the TV and line signal levels . .69
Recording mode . . . . . . . . . . . . . . . . . . .70
Connecting using the S-video output
(Not Applicable to the European model) . . .70
Connecting using the component video
output (Not Applicable to the
07 More tuner features: RDS
European model only
An introduction to RDS . . . . . . . . . . . . . . 50
Displaying RDS information . . . . . . . . . 51
Searching for RDS programs. . . . . . . . . 51
European model) . . . . . . . . . . . . . . . . . . . .70
Using the SCART AV output
(European model only) . . . . . . . . . . . . . . . .71
Switching the TV audio input from
08 Using the timer
Setting the wake-up timer . . . . . . . . . . . . 52
Turning the wake-up timer on/off . . . . . . 53
Setting the sleep timer . . . . . . . . . . . . . . . 53
SCART to RCA. . . . . . . . . . . . . . . . . . . . .71
09 Surround sound setup
13 Additional information
Setting up surround sound . . . . . . . . . . . 55
System Setup menu options . . . . . . . . . 55
Setting the channel levels . . . . . . . . . . . 57
Switching off the demo . . . . . . . . . . . . . . .73
Child Lock . . . . . . . . . . . . . . . . . . . . . . . . .73
Changing the clock format . . . . . . . . . . . .73
Setting the TV format. . . . . . . . . . . . . . . . .73
Watching NTSC on a PAL TV
10 Video Adjust menu
Video Adjust. . . . . . . . . . . . . . . . . . . . . . . 58
Creating your own presets . . . . . . . . . . . 58
(MOD. PAL) . . . . . . . . . . . . . . . . . . . . . . . .74
Changing the frequency step
(Not Applicable to the European model) . . .74
Resetting the system. . . . . . . . . . . . . . . . .74
Using and taking care of discs . . . . . . . . .74
Titles, chapters and tracks . . . . . . . . . . .74
DVD Video regions . . . . . . . . . . . . . . . . .75
Handling discs . . . . . . . . . . . . . . . . . . . .75
Storing discs. . . . . . . . . . . . . . . . . . . . . .75
Discs to avoid . . . . . . . . . . . . . . . . . . . . .76
11 Initial Settings menu
Using the Initial Settings menu . . . . . . . . 60
Video Output settings. . . . . . . . . . . . . . . . 60
TV Screen . . . . . . . . . . . . . . . . . . . . . . . 60
AV Connector Out
(European model only) . . . . . . . . . . . . . . 60
Component Out (Not Applicable to
the European model) . . . . . . . . . . . . . . . 61
S-Video Out (Not Applicable to
the European model) . . . . . . . . . . . . . . . 62
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Proper installation and maintenance
of this system. . . . . . . . . . . . . . . . . . . . . . 76
Hints on installation. . . . . . . . . . . . . . . . 76
Cleaning the pickup lens . . . . . . . . . . . . 76
Problems with condensation . . . . . . . . . 77
Moving the system unit . . . . . . . . . . . . . 77
Power cord caution . . . . . . . . . . . . . . . . 77
Troubleshooting . . . . . . . . . . . . . . . . . . . . 78
General . . . . . . . . . . . . . . . . . . . . . . . . . 78
DVD/CD/Video CD player. . . . . . . . . . . . 79
WMA/MP3/JPEG discs . . . . . . . . . . . . . 80
Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Error Messages . . . . . . . . . . . . . . . . . . . 81
Screen sizes and disc formats . . . . . . . . . 82
Widescreen TV users . . . . . . . . . . . . . . . 82
Standard TV users . . . . . . . . . . . . . . . . . 82
Selecting languages using the
language code list . . . . . . . . . . . . . . . . . . 82
Language code list. . . . . . . . . . . . . . . . . . 83
Country code list . . . . . . . . . . . . . . . . . . . 83
Preset code list . . . . . . . . . . . . . . . . . . . . 84
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Specifications . . . . . . . . . . . . . . . . . . . . . 89
Amplifier section . . . . . . . . . . . . . . . . . . 89
Disc section. . . . . . . . . . . . . . . . . . . . . . 89
FM tuner section . . . . . . . . . . . . . . . . . . 89
AM tuner section . . . . . . . . . . . . . . . . . . 89
Miscellaneous . . . . . . . . . . . . . . . . . . . . 89
Accessories (DVD/CD receiver) . . . . . . . 89
Speaker System. . . . . . . . . . . . . . . . . . . 89
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
CBhaepfteor 1re you start
MP3 and WMA compatibility
Features
This system is compatible with CD-R, CD-RW
and CD-ROM discs that contain MP3 or WMA
audio tracks. See also Compressed audio
compatibility on page 10.
24-bit/96kHz compatible DAC
This system is fully compatible with high
sampling-rate discs, capable of delivering
better-than-CD sound quality in terms of
dynamic range, low-level resolution and high-
frequency detail.
Graphical on-screen displays
Setting up and using your DVD home theater
system is made very easy using the graphical
on-screen displays.
Excellent audio performance with
Dolby Digital, Dolby Pro Logic, Dolby
Energy saving design
This unit is designed to use 0.39 W of power
*1
*2
Pro Logic II and DTS software
when in standby mode.
Built-in Dolby Digital and DTS decoders let
you enjoy true discrete multi-channel home
theater sound with Dolby Digital and DTS
encoded DVD discs.
*1 Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic” and the
double-D symbol are trademarks of Dolby
Laboratories.
Dolby Pro Logic and Dolby Pro Logic II
decoding adds excitement to two-channel
source material with surround sound
playback.
*2 “DTS” and “DTS Digital Surround” are
registered trademarks of Digital Theater
Systems, Inc.
Picture zoom
While a DVD or Video CD/Super VCD is
playing, you can zoom in on any part of the
picture at up to 4x magnification for a closer
look. See Zooming the screen on page 45.
PureCinema progressive scan
Not applicable to the European model
When connected to a progressive scan-
compatible TV or monitor using the
component video outputs, you can enjoy
extremely stable, flicker free images, with the
same frame refresh rate as the original movie.
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
01
Before you start
Introduction to home theater General disc compatibility
You are probably used to using stereo
equipment to listen to music, but may not be
used to home theater systems that give you
many more options (such as surround sound)
when listening to soundtracks.
This system was designed and engineered to
be compatible with software bearing one or
more of the following logos:
Home theater refers to the use of multiple
audio tracks to create a surround sound
effect, making you feel like you're in the
middle of the action or concert. The surround
sound you get from a home theater system
depends not only on the speakers you have
set up in your room, but also on the source
and the sound settings of the system.
DVD-Video
DVD-R
DVD-RW
Audio CD
Video CD
CD-R
CD-RW
DVD-Video has become the basic source
material for home theater due to its size,
quality, and ease of use. Depending on the
DVD, you can have up to seven different audio
tracks coming from one disc, all of them
being sent to different speakers in your
system. This is what creates a surround
sound effect and gives you the feeling of
‘being there’.
Fujicolor CD
• KODAK Picture CD
is a trademark of Fuji Photo Film Co.
•
Ltd.
This player supports the IEC’s Super VCD
standard. Compared to the Video CD stan-
dard, Super VCD offers superior picture
quality, and allows two stereo soundtracks to
be recorded. Super VCD also supports the
widescreen size.
This system will automatically decode Dolby
Digital, DTS, or Dolby Surround DVD-Video
discs, according to your speaker setup. In
most cases, you won’t have to make changes
for realistic surround sound, but other
possibilities (like listening to a CD with multi-
channel surround sound) are explained in
Home theater sound on page 29.
VIDEO
CD
Super Video CD (Super VCD)
Other formats, including but not limited to the
following, are not playable in this system:
DVD-Audio / SACD / DVD-RAM
DVD-ROM / CD-ROM*
* Except those that contain MP3, WMA or
JPEG. See also Compressed audio
compatibility and JPEG file compatibility
below.
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
DVD-R/RW and CD-R/RW discs (Audio CDs
and Video CD/Super VCDs) recorded using a
DVD recorder, CD recorder or personal
computer may not be playable on this system.
This may be caused by a number of
possibilities, including but not limited to: the
type of disc used; the type of recording;
damage, dirt or condensation on either the
disc or the player’s pick-up lens. See below for
notes about particular software and formats.
PC-created disc compatibility
• If you record a disc using a personal
computer, even if it is recorded in a
“compatible format” as listed above, there
will be cases in which the disc may not be
playable in this machine due to the
setting of the application software used to
create the disc. In these particular
instances, check with the software
publisher for more detailed information.
• Check the DVD-R/RW or CD-R/RW
software disc boxes for additional
compatibility information.
CD-R/RW compatibility
• This system will play CD-R and CD-RW
discs recorded in CD Audio or Video CD/
Super VCD format, or as a CD-ROM
containing MP3, WMA or JPEG files.
However, any other content may cause
the disc not to play, or create noise/
distortion in the output.
About WMA
• This system cannot record CD-R or CD-
RW discs.
• Unfinalized CD-R/RW discs recorded as
CD Audio can be played, but the full Table
of Contents (playing time, etc.) will not be
displayed.
DVD-R/RW compatibility
• This unit will play DVD-R/RW discs
recorded using the DVD-Video format that
have been finalized using a DVD-recorder.
The Windows Media™ logo printed on the box
indicates that this player can playback WMA
data.
• This unit will play DVD-RW discs recorded
using the Video Recording (VR) format.
WMA is short for Windows Media Audio and
refers to an audio compression technology
developed by Microsoft Corporation. WMA
data can be encoded by using Windows
Media Player version 8 (or less) or Windows
Media Player for Windows XP.
• DVD-RW shows in the display when a VR
format DVD-RW disc is loading.
• When playing a VR format DVD-RW discs
that was edited on a DVD recorder, the
screen may go momentarily black at
Windows Media, and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
edited points and/or you may see scenes
from immediately before the edited point.
• This unit cannot record DVD-R/RW discs.
• Unfinalized DVD-R/RW discs cannot be
played in this player.
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
01
Before you start
• When naming MP3 and WMA files, add
the corresponding file name extension
(.mp3 or .wma). Files are played
according to the file extension. To prevent
noise and malfunctions, do not use these
extensions for other kinds of files.
Compressed audio compatibility
• This unit will play CD-ROM, CD-R, and
CD-RW discs containing files saved in the
MPEG-1 Audio Layer 3 (MP3) or Windows
Media Audio (WMA) format with a
sampling rate of 32, 44.1 or 48kHz (except
32 kHz WMA files encoded at 20 kbps).
Incompatible files will not play and the
message Can’t play this format will be
displayed (No Play in the front panel
display).
• This player can recognize up to 999 files
(WMA/MP3/JPEG) and up to 499 folders.
If a disc exceeds these limits, only files
and folders up to these limits will be
playable. Files and folders are read/
displayed in alphabetical order. Note that
if the file structure is very complex, you
may not be able to read/play all files on
the disc.
• Fixed bit-rate files are recommended.
Variable bit-rate (VBR) MP3 files are
playable, but playing time may not be
shown correctly.
• Folder and track names (excluding the file
extension) are displayed.
• This player is compatible with WMA data
encoded using Windows Media Player
version 8 (or less) or Windows Media
Player for Windows XP.
• There are many different recording bit-
rates available to encode MP3 files. This
unit was designed to be compatible with
all of them. Audio encoded at 128Kbps
should sound close to regular CD Audio
quality. This player will play lower bit-rate
files, but please note that the sound
quality becomes noticeably worse at
lower bit-rates.
• This player is not compatible with
lossless-encoding or variable bit-rate
(VBR) WMA files.
• WMA files encoded with DRM (Digital
Rights Management) copy protection will
not play and the message Can’t play this
format will be displayed (No Play in the
front panel display).
JPEG file compatibility
• The CD-ROM used to compile your MP3,
WMA must be ISO 9660 Level 1 or 2
compliant. CD physical format: Mode1,
Mode2 XA Form1. Romeo and Joliet file
systems are both compatible with this
player.
• Baseline JPEG and EXIF 2.1* still image
files up to 8 mega-pixels are supported
(maximum vertical and horizontal
resolution is 5120 pixels). (*File format
used by digital still cameras)
• The CD-ROM used to compile your JPEG
files must be ISO 9660 Level 1 or 2
compliant. CD physical format: Mode1,
Mode2 XA Form1. Romeo and Joliet file
systems are both compatible with this
player.
• Use CD-R or CD-RW media for recording
your files. The disc must be finalized (i.e.
the session must be closed) in order to
play in this unit. This player is not
compatible with multi-session discs. Only
the first session of a multi-session disc
will be recognized.
• This player only displays files that are
named with the file extension .jpg or
.JPG.
• This player only plays tracks that are
named with the file extension .mp3,
.MP3, .wma, or .WMA.
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
02
CChaoptnert2rols and displays
Front panel
1
2
3
4
5
6
7
UP
+
STANDBY/ON
VOLUME
DOWN
–
FM/AM
7
6
DVD
/CD
¶
0
OPEN/CLOSE
PHONES
12
11
10
9
8
1
ꢀ OPEN/CLOSE
9
Timer indicator
Press to open/close the disc tray.
Lights when the wake-up timer is set
(page 52).
2
3
Operation indicator
10 Display
See Display on page 12 for detailed
information.
ꢁ DVD/CD
Press to switch to the DVD/CD function. Also
press to start/pause/resume playback.
11 Remote sensor
12 Disc tray
4
ꢂ
Press to stop playback.
5
FM/AM
Press to switch to the tuner function, then to
toggle between the FM and AM bands.
6
VOLUME buttons
Use to adjust the volume.
7
ꢃ STANDBY/ON
Press to switch the system on or into standby.
8
PHONES jack
Headphone jack.
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Controls and displays
Display
3
5
1
2
4
6
7
8
9 10 11 12
13
MIDNIGHT QUIET
PGM RPT-1
RDM
ATT
REC MODE
PRO LOGIC
DIGITAL
ADV.SURR.
PRGSVE
kHz
MHz
19
18
17 16 15 14
1
Tuner indicators
6
RPT and RPT-1
RPT lights during repeat play. RPT-1 lights
during repeat one-track play (page 38).
European model only
7
RDM
Lights when in one of the RDS display or
search modes.
Lights during random play (page 39).
8
ATT
Lights when the input attenuator is active for
the currently selected analog input (page 69).
Lights when a broadcast is being
received.
9
REC MODE
Lights when Rec Mode is active (page 70).
Lights when a stereo FM broadcast is
being received in auto stereo mode.
10 Timer indicators
Lights when the wake-up timer is set
(page 52).
Lights when FM mono reception is
selected.
2
ꢄ
Lights when the sleep timer is active
(page 53).
Lights when a disc is playing.
3
MIDNIGHT
11 2PRO LOGIC II
Lights during Dolby Pro Logic decoding
(page 29).
Lights when the Midnight mode is selected
(page 33).
4
QUIET
12 2DIGITAL
Lights during playback of a Dolby Digital
source (page 29).
Lights when the Quiet mode is selected
(page 33).
5
PGM
Lights when a program list has been
programmed (page 40).
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
02
13 Speaker indicators
These show which speakers are being used to
output the current source. The illustrations
below show some example displays.
5.1 channel surround sound
Stereo (2.1 channel) sound
3.1 channel sound with Dialogue
enhancement on the center
channel
5.1 channel surround sound with
Virtual Surround Back mode active
14 PRGSVE
Not applicable to the European model
Lights when progressive scan video output is
selected (page 61).
15 ADV.SURR.
Lights when one of the Advanced Surround
listening modes is selected (page 31).
16 DTS
Lights during playback of a DTS source
(page 29).
17 kHz / MHz
Indicates the unit of the frequency shown in
the character display (kHz for AM, MHz for
FM).
18 Character display
19
Lights during multi-angle scenes on a DVD
disc (page 45).
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Controls and displays
3
DISPLAY
Remote control
Press to display/change disc information
shown on-screen (page 45).
STANDBY/ON
1
4
Disc playback controls
CD
FM/AM
TUNER
L1/L2
LINE
DVD
TV
2
ꢄ
DISPLAY
OPEN/CLOSE
0
Press to start or resume playback.
3
4
5
6
7
8
11
1
3
7
¡
ꢅ and ꢆ/ꢇ
Use for reverse slow motion playback,
frame reverse and reverse scanning.
4
4
12
13
DVD MENU
RETURN
TUNE+
ꢈ and ꢉ/ꢊ
Use for forward slow motion playback,
frame advance and forward scanning.
ST–
ST+
ENTER
TUNE–
MUTE
SOUND
8
9
14
ꢋ
MASTER
VOLUME
Press to pause playback; press again to
restart.
TV CONTROL
10
15
CH
INPUT
VOL
ꢂ
Press to stop playback.
BASS MODE DIALOGUE
VIRTUAL SB
AUTO
SURROUND ADVANCED
5
ꢌ
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
Press to jump to the beginning of the current
chapter/track, then to previous chapters/
tracks.
16
17
18
19
20
21
HOME
MENU
ZOOM
1
TOP MENU
2
3
SYSTEM
SETUP
TEST TONE
5
CH LEVEL
6
6
DVD MENU
4
22
QUIET/
TIMER/
CLOCK
Press to display a DVD disc menu, or the Disc
Navigator if a VR format DVD-RW, CD, Video
CD/Super VCD, MP3, WMA or JPEG disc is
loaded.
DIMMER
7
MIDNIGHT
8
9
FOLDER–
0
FOLDER+
ENTER
CLR
ROOM SETUP
MAIN
SUB
7
Cursor buttons, ENTER and tuning
buttons
Cursor buttons
Use the cursor buttons (ꢀ/ꢁ/ꢂ/ꢃ) to
• Functions printed in green on the remote
control are accessed by switching the
MAIN/SUB switch to SUB.
navigate on-screen displays and menus.
ENTER
Press to select an option or execute a
command.
1
ꢃ STANDBY/ON
Press to switch the system on or into standby.
TUNE +/–
Use to tune the radio.
2
Function select buttons
Press to select the source you want to listen to
(DVD (CD). TUNER, TV, LINE)
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
02
ST +/–
ADVANCED
Use to select station presets when
listening to the radio.
Use to select an Advanced Surround
(page 31).
8
9
MUTE
BASS MODE
Use to select a Bass Mode (page 34).
Press to mute all sound from the speakers
and headphones (press again to cancel)
(page 34).
DIALOGUE
Use to select a Dialogue mode (page 32).
MASTER VOLUME
VIRTUAL SB
Press to switch the Virtual Surround Back
speaker effect on/off (page 32).
Use to adjust the volume.
10 TV CONTROL (page 19)
16 DVD/CD buttons
ꢃ
Press to switch the TV on or into standby.
AUDIO
Press to select an audio channel or
language (page 44).
INPUT
Press to switch the TV input.
SUBTITLE
CH +/–
Press to display/change the DVD subtitle
display (page 44).
Use to select channels on the TV.
VOL +/–
ANGLE
Use to adjust the volume on the TV.
Press to change camera angle during
DVD multi-angle scene playback
(page 45).
11 ꢀ OPEN/CLOSE
Press to open/close the disc tray.
12 ꢍ
PROGRAM
Use to program/play a program list
(page 40).
Press to jump to the next chapter/track.
13 RETURN
Press to return to a previous menu screen.
REPEAT
Use to select a repeat play mode
(page 38).
14 SOUND
Press to access the sound menu, from which
you can adjust the DSP effect level, bass and
treble, etc.
RANDOM
Use to select a random play mode
(page 39).
15 Surround sound mode/sound
enhancement buttons
17 ZOOM
Press to change the screen zoom level
(page 45).
AUTO
Press to select the default decoding for
the current source (page 29).
TOP MENU
Use to display the top menu of a DVD disc
in the play position (this may be the same
as pressing DVD MENU).
SURROUND
Use to select a Surround mode (page 29).
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Controls and displays
HOME MENU
22 Number buttons
Press to display (or exit) the on-screen
menu for Initial Settings, Play Mode
functions, etc.
Use the number buttons for selecting
chapters/tracks from a disc directly.
18 SYSTEM SETUP
Use to make various system and surround
sound settings (page 55).
TEST TONE
Use to output the test tone (for speaker
setup) (page 57).
CH LEVEL
Use to adjust the speaker level (page 57).
19 DIMMER
Press to switch between normal and
dimmed front panel display.
QUIET/MIDNIGHT
Use to select the Quiet and Midnight
modes (page 33).
TIMER/CLOCK
Press to display the clock and to access
the timer menu (page 18 and page 52).
20 CLR
Press to clear an entry.
FOLDER –
Press to jump to previous folders.
FOLDER +
Press to jump to the next folder.
ENTER
Selects menu options, etc. (works exactly
the same as the ENTER button in 7
above).
21 MAIN/SUB
Change from MAIN to SUB to access the
functions/commands printed in green on the
remote.
ROOM SETUP
Press to start Room Setup (page 19).
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
03
Chapter 3
Getting started
2
European model only: Use the ꢀ/ꢁ
Switching on and setting up
(cursor up/down) buttons to choose a
language, then press ENTER.
After making sure everything is connected up
properly, you’re ready to switch on. The first
thing to do is to tell the system what kind of TV
you’re using, standard or widescreen.
Let's Get Started Menu
After that you can set up the surround sound
for your room, and set the clock so that you
can use the timer features.
Select the display language
using the cursor keys on the remote
English
français
Deutsch
Italiano
Español
STANDBY/ON
CD
FM/AM
TUNER
L1/L2
LINE
Choose one then press Enter
DVD
TV
DISPLAY
OPEN CLOSE
0
8
Not Applicable to the European
model: After you’re finished reading
the welcome screen, press ENTER to
move on.
1
3
7
¡
4
4
DVD MENU
RETURN
TUNE+
ST–
ST+
ENTER
TUNE–
MUTE
SOUND
Welcome to Pioneer DVD!
Thank you for purchasing this Pioneer DVD player.
MASTER
VOLUME
Before using, please take a little time
to setup your DVD player
Put the batteries into the remote control
TV CONTROL
Next, press the [ENTER] button on the remote control
and start the Let's Get Started Menu
CH
INPUT
VOL
Next
1
Press ꢃ STANDBY/ON (on the remote
or on the front panel) to switch the
system on.
Also make sure that your TV is switched on
and that the video input is set to this system.
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Getting started
3
Use the ꢂ/ꢃ (cursor left/right)
Setting the clock
Setting the clock allows you to use the timer
features.
buttons to select either ‘Wide screen
(16:9)’ or ‘Standard size screen (4:3)’
according to the kind of TV you have, then
press ENTER.
STANDBY/ON
See also Screen sizes and disc formats on
page 82 if you’re not sure which one to
choose.
CD
FM/AM
TUNER
L1/L2
LINE
DVD
TV
DISPLAY
OPEN CLOSE
0
8
Let's Get Started Menu
1
3
7
¡
4
4
What kind of TV do you have?
DVD MENU
RETURN
Use the
/
cursor buttons
to choose, then press [ENTER]
ENTER
MUTE
SOUND
Wide screen (16:9)
Standard size screen (4:3)
MASTER
VOLUME
TV CONTROL
4
Press ENTER again to finish setting up.
CH
INPUT
VOL
Let's Get Started Menu
BASS MODE DIALOGUE
VIRTUAL SB
AUTO
SURROUND ADVANCED
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
Setup complete
SUBTITLE
If you're finished setting up,
choose [Complete],
HOME
MENU
ZOOM
1
TOP MENU
2
3
to start again choose [Back]
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
4
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
Complete
Back
FOLDER–
0
FOLDER+
ENTER
CLR
ROOM SETUP
MAIN
SUB
• Use the ꢃ (cursor right) button to select
BACK then press ENTER if you want to go
back and change the setting you just
made.
1
2
Press TIMER/CLOCK.
• If you are adjusting the clock, rather then
setting it for the first time, press TIMER/
CLOCK again.
If ‘Clock ADJ?’ isn’t already showing in
the display, press ꢂ or ꢃ (cursor left or
• You can also use the function buttons
(DVD/CD, TUNER, etc.) or the ꢀ OPEN/
CLOSE button to switch the system on
from standby.
right) until you see it.
3
4
Press ENTER.
Use the ꢀ/ꢁ (cursor up/down)
buttons to set the hour.
5
Press ENTER.
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
03
6
Use the ꢀ/ꢁ (cursor up/down)
MASTER
VOLUME
buttons to set the minute.
TV CONTROL
7
Press ENTER to confirm.
CH
INPUT
VOL
The display flashes to indicate the clock is set.
BASS MODE DIALOGUE
AUTO
VIRTUAL SB
SURROUND ADVANCED
• Press TIMER/CLOCK anytime to display
the clock.
Button
What it does
Switches your TV on or into
standby.
ꢃ
CH +/–
VOL +/–
INPUT
Changes the TV channel.
Adjusts the volume.
• If you unplug the system from the wall
outlet, or there is a power outage, you will
need to set the clock again.
Switches the TV’s input
between the built in TV tuner
and an external video source.
Setting up the remote to control
your TV
You can set up the supplied remote to control
your TV using the TV CONTROL buttons.
• The default setting is for a Pioneer TV.
1
Switch on your TV.
2
Find the name of the manufacturer of
Using the Room Setup
your TV in the Preset code list on page 84
Next to each manufacturer is one or more
three digit codes. These tell the remote what
kind of TV you have.
Before using your system to enjoy surround
sound playback, we recommend you spend a
few minutes using the Room Setup. This is a
quick and easy way to get good surround
sound for your room.
If the name of the manufacturer of your TV
does not appear in the table, you won’t be
able to set up this remote to control your TV.
Depending on the distance of the surround
speakers from your main listening position,
choose between S (small), M (medium), or L
(large) room, then depending on your seating
position relative to the front and surround
speakers, choose Fwd (forward), Mid, or
Back.
3
Point the remote at your TV, hold
down the CLR button, then enter the
three digit code for your TV.
The remote transmits an on/off signal to the
TV. If you’ve entered the correct code, your TV
should switch off.
If your TV doesn’t turn off, repeat the
procedure using the next code in the list until
your TV switches off successfully. Once set,
you can then use the individual TV controls
shown below.
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Getting started
1
If the system isn’t already on, press
• For a more detailed surround sound
setup, see Setting up surround sound on
page 55.
ꢃ STANDBY/ON to switch it on.
2
Press ROOM SETUP.
• If you have previously set up the room type
and seating position, the display will show
the current room settings.
Using the on-screen displays
For ease of use, this system makes extensive
use of graphical on-screen displays (OSDs).
You should get used to the way these work as
you’ll need to use them when setting up the
system, using some of the playback features,
such as program play, and when making
more advanced settings for audio and video.
3
4
Press ENTER.
Use the ꢀ/ꢁ (cursor up/down)
buttons to select a room type then press
ENTER.
Choose one of the following depending on
your room size:
All the screens are navigated in basically the
same way, using the cursor buttons (ꢀ, ꢁ,
ꢂ, ꢃ) to change the highlighted item and
pressing ENTER to select it.
• S – Smaller than average room
• M – Average room
• L – Larger than average room
5
Use the ꢀ/ꢁ (cursor up/down)
buttons to select a seating position
setting, then press ENTER.
Choose one of the following depending on
where your main listening position is:
• Throughout this manual, ‘Select’ means
use the cursor buttons to highlight an
item on-screen, then press ENTER.
• Fwd – If you are nearer to the front
speakers than the surround speakers
• Mid – If you are equal distance from the
front and surround speakers
• Back – If you are nearer to the surround
speakers than the front speakers
• The Room Setup automatically sets up
both channel level and channel delay. If
you have already set the channel levels
manually (see Setting the channel levels
on page 57), you will see Room Set? in
the display when you first press the
ROOM SETUP button.
• Using the Room Setup will overwrite any
previous settings you had for channel
level and channel delay.
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
03
DISPLAY
OPEN CLOSE
0
8
3
7
1
¡
• The button guide at the bottom of every
OSD screen shows you which buttons
you’ll need to use for that screen.
4
4
DVD MENU
RETURN
SOUND
ENTER
Playing discs
MUTE
The basic playback controls for playing DVD,
CD, Video CD/Super VCD and WMA/MP3
discs are covered here. Further functions are
detailed in the chapter 5.
MASTER
VOLUME
TV CONTROL
CH
INPUT
VOL
1
If the player isn’t already on, press
ꢃ STANDBY/ON to switch it on.
If you’re playing a DVD or Video CD, also turn
on your TV and make sure that it is set to the
correct video input.
BASS MODE DIALOGUE
VIRTUAL SB
AUTO
SURROUND ADVANCED
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
3
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
2
Press ꢀ OPEN/CLOSE to open the disc
4
QUIET/
TIMER/
tray.
DIMMER
7
MIDNIGHT
CLOCK
8
9
FOLDER–
0
FOLDER+
ENTER
3
Load a disc.
CLR
ROOM SETUP
MAIN
SUB
Load a disc with the label side facing up,
using the disc tray guide to align the disc (if
you’re loading a double-sided DVD disc, load
it with the side you want to play face down).
Button
What it does
Displays/exits the on-screen
display
HOME
MENU
ꢂꢀꢁꢃ
Changes the highlighted menu
item
Selects the highlighted menu
item (both ENTER buttons work
in exactly the same way)
ENTER
Returns to the main menu
without saving changes
RETURN
4
Press ꢄ (play) to start playback.
If you’re playing a DVD or Video CD/Super
VCD, a menu may appear. See DVD-Video disc
menus on page 24 and Video CD/Super VCD
PBC menus on page 25 for how to navigate
these.
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Getting started
If you’re playing an WMA/MP3 disc, it may
take a few seconds before playback starts,
depending on the complexity of the file
structure on the disc.
Basic playback controls
The table below shows the basic controls on
the remote for playing discs. You can find
other playback features in the chapter 5.
If you loaded a CD/CD-R/RW containing
JPEGs, a slideshow will start. See Viewing
JPEG discs on page 48 for more on playing
these discs.
STANDBY/ON
CD
FM/AM
TUNER
L1/L2
LINE
DVD
TV
DISPLAY
OPEN CLOSE
• See also PhotoViewer on page 67 if the
disc contains both WMA/MP3 audio files
and JPEG picture files.
0
8
1
3
7
¡
4
4
5
Use the MASTER VOLUME – / + button
DVD MENU
RETURN
(or the front panel VOLUME buttons) to
adjust the volume.
TUNE+
ST–
ST+
ENTER
TUNE–
MUTE
SOUND
MASTER
VOLUME
TV CONTROL
CH
INPUT
VOL
BASS MODE DIALOGUE
VIRTUAL SB
AUTO
SURROUND ADVANCED
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
3
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
4
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
FOLDER–
0
FOLDER+
ENTER
CLR
ROOM SETUP
MAIN
SUB
Button
What it does
ꢄ
Starts playback.
DVD and Video CD/Super VCD: If
the display shows Resume or
Last Mem playback starts from
the resume or last memory point
(see also Resume and Last
Memory below.)
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
03
Button
What it does
ꢃ
Pauses a disc that’s playing, or
restarts a paused disc.
• You may find with some DVD discs that
some playback controls don’t work in
certain parts of the disc. This is not a
malfunction.
• Track skip and number buttons for track
selection do not work with unfinalized CD-
R/RW discs.
ꢂ
Stops playback.
DVD and Video CD/Super VCD:
The display shows Resume.
Press ꢂ again if you want to
cancel the resume function.
(See also Resume and Last
Memory below.)
Using the front panel controls
The ꢀ OPEN/CLOSE, ꢁ DVD/CD, FM/AM
and ꢂ (stop) buttons work the same way as
the remote control equivalents.
ꢄ
ꢆ
ꢇ
ꢈ
Press to start fast reverse
scanning. Press ꢅ (play) to
resume normal playback.
Press to start fast forward
scanning. Press ꢅ (play) to
resume normal playback.
Resume and Last Memory
When you stop playback of a DVD or Video CD
disc, Resume shows in the display indicating
that you can resume playback from that point.
If the disc tray is not opened, the next time you
start playback the display shows Resume and
playback resumes from the resume point.
For DVD discs only: If you take the disc out of
the player, the play position is stored in
memory. When you load the disc next time,
the display shows Last Mem and you can
resume playback (this works for up to five
discs).
Skips to the start of the current
track or chapter, then to previous
tracks/chapters.
Skips to the next track or
chapter.
FOLDER +/– Skips to the next/previous folder
when playing an WMA/MP3 disc.
Numbers
• If the disc is stopped, playback
starts from the selected title (for
DVD) or track number (for CD/
Video CD/Super VCD/WMA/
MP3) after a few seconds (or
after pressing ENTER).
If you want to clear the resume/last memory
point, press ꢂ (stop) while Resume or Last
Mem is displayed.
• If the disc is playing, playback
jumps to the start of the selected
chapter or track after a few
seconds (or after pressing
ENTER).
• When a Video CD is loaded, the Resume
point is lost if the system is switched off,
or switched to a function other than DVD
(CD).
• For the Last Memory function to work, you
must press ꢂ (stop) to stop playback
before opening the disc tray.
• The Last Memory function doesn’t work
with VR format DVD-RW discs.
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Getting started
DVD-Video disc menus
Many DVD-Video discs contain menus from
which you can select what you want to watch.
They may give access to additional features,
such as subtitle and audio language
selection, or special features such as
slideshows. See the disc packaging for
details.
• After I load a DVD disc, it ejects
automatically after a few seconds!
Most likely, the disc is the wrong region
for your system. The region number
should be printed on the disc; check it
against the region number of the system
(which you can find on the rear panel).
See also DVD Video regions on page 75.
Sometimes DVD-Video menus are displayed
automatically when you start playback; others
only appear when you press DVD MENU or
TOP MENU.
If the region number is OK, it may be that
the disc is damaged or dirty. Clean the
disc and look for signs of damage. See
also Using and taking care of discs on
page 74.
STANDBY/ON
CD
FM/AM
TUNER
L1/L2
LINE
DVD
TV
• Why won’t the disc I loaded play?
DISPLAY
OPEN CLOSE
0
8
First check that you loaded the disc the
right way up (label side up), and that it’s
clean and not damaged. See Using and
taking care of discs on page 74 for
information on cleaning discs.
1
3
7
¡
4
4
DVD MENU
RETURN
SOUND
If a disc loaded correctly won’t play, it’s
probably an incompatible format or disc
type, such as DVD-Audio or DVD-ROM.
See General disc compatibility on page 8
for more on disc compatibility.
ENTER
MUTE
MASTER
VOLUME
TV CONTROL
• I have a widescreen TV so why are there
black bars at the top and bottom of the
screen when I play some discs?
CH
INPUT
VOL
BASS MODE DIALOGUE
VIRTUAL SB
AUTO
SURROUND ADVANCED
Some movie formats are such that even
when played on a widescreen TV, black
bars are necessary at the top and bottom
of the screen. This is not a malfunction.
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
3
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
4
• I have a standard (4:3) TV and set the
system to show widescreen DVDs in pan &
scan format, so why do I still get black bars
top and bottom with some discs?
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
FOLDER–
0
FOLDER+
ENTER
CLR
ROOM SETUP
MAIN
SUB
Some discs override the display
preferences of the system, so even if you
have 4:3 (Pan & Scan) selected, those
discs will still be shown in letterbox
format. This is not a malfunction.
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
03
Video CD/Super VCD PBC menus
Some Video CD/Super VCDs have menus
from which you can choose what you want to
watch. These are called PBC (Playback
control) menus.
Button
What it does
Displays the ‘top menu’ of a DVD
disc—this varies with the disc.
TOP MENU
You can play a PBC Video CD/Super VCD
without having to navigate the PBC menu by
starting playback using a number button to
select a track, rather than ꢄ(play) (or ꢁ on
the front panel).
Displays a DVD disc menu—this
varies with the disc and may be
the same as the ‘top menu’.
DVD
MENU
ꢂꢀꢁꢃ
Moves the cursor around the
screen.
STANDBY/ON
Selects the current menu option.
ENTER
CD
FM/AM
TUNER
L1/L2
LINE
DVD
TV
Returns to the previously
displayed menu screen.
RETURN
DISPLAY
OPEN CLOSE
0
8
Numbers
Highlights a numbered menu
option (some discs only). Press
ENTER to select.
1
3
7
¡
4
4
DVD MENU
RETURN
TUNE+
ST–
ST+
ENTER
TUNE–
MUTE
SOUND
MASTER
VOLUME
TV CONTROL
CH
INPUT
VOL
BASS MODE DIALOGUE
VIRTUAL SB
AUTO
SURROUND ADVANCED
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
3
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
4
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
FOLDER–
0
FOLDER+
ENTER
CLR
ROOM SETUP
MAIN
SUB
Button
What it does
Displays the PBC menu.
RETURN
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Getting started
Listening to the radio
Button
What it does
The tuner can receive both FM and AM
broadcasts, and lets you memorize your
favorite stations so you don’t have to manually
tune in every time you want to listen. For more
on using the radio, see More tuner features:
RDS on page 50.
Numbers
Selects a numbered menu
option.
ꢌ
Displays the previous menu page
(if there is one).
ꢍ
Displays the next menu page (if
there is one).
STANDBY/ON
Press to select highlighted menu
option.
ENTER
CD
FM/AM
TUNER
L1/L2
LINE
DVD
TV
DISPLAY
OPEN CLOSE
0
8
1
3
7
¡
4
4
DVD MENU
RETURN
TUNE+
ST–
ST+
ENTER
TUNE–
MUTE
SOUND
MASTER
VOLUME
TV CONTROL
CH
INPUT
VOL
BASS MODE DIALOGUE
VIRTUAL SB
AUTO
SURROUND ADVANCED
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
3
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
4
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
FOLDER–
0
FOLDER+
ENTER
CLR
ROOM SETUP
MAIN
SUB
1
If the system isn’t already on, press
ꢃ STANDBY/ON to switch on.
2
Press TUNER to switch to the tuner,
then press repeatedly to select the AM or
FM band.
The display indicates the tuner band and the
frequency.
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
03
• If you’re using the front panel controls,
the TUNER button switches between FM,
AM and station presets (see Memorizing
stations below).
Memorizing stations
You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.
3
Tune to a frequency.
There are three tuning modes—manual, auto,
and high-speed:
STANDBY/ON
CD
FM/AM
TUNER
L1/L2
LINE
• Manual tuning: Press TUNE +/–
repeatedly to change the displayed
frequency.
DVD
TV
DISPLAY
OPEN CLOSE
0
8
• Auto tuning: Press and hold TUNE +/–
until the frequency display starts to move,
then release. The tuner will stop on the
next station it finds. Repeat to search for
other stations.
1
3
7
¡
4
4
DVD MENU
RETURN
TUNE+
ST–
ST+
ENTER
• High-speed tuning: Press and hold
TUNE +/– until the frequency display
starts to move rapidly. Keep the button
held down until you reach the frequency
you want. If necessary, fine tune the
frequency using the manual tuning
method.
TUNE–
MUTE
SOUND
MASTER
VOLUME
TV CONTROL
CH
INPUT
VOL
BASS MODE DIALOGUE
VIRTUAL SB
AUTO
SURROUND ADVANCED
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
Improving poor FM reception
If you’re listening to an FM station in stereo
but the reception is weak, you can improve
the sound quality by switching to mono.
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
3
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
4
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
1
2
3
Tune to an FM radio station.
Press SYSTEM SETUP.
FOLDER–
0
FOLDER+
ENTER
CLR
ROOM SETUP
MAIN
SUB
Use the ꢂ/ꢃ (cursor left/right)
buttons to choose ‘FM Mode?’ then press
ENTER.
1
Tune to an AM or FM radio station.
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
4
Use the ꢀ/ꢁ (cursor up/down)
buttons to select ‘FM Mono’ then press
ENTER.
The mono indicator ( ) lights when the tuner
is in mono reception mode.
Select Auto above to switch back to auto-
stereo mode (the stereo indicator ( ) lights
when receiving a stereo broadcast).
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Getting started
2
3
Press SYSTEM SETUP.
Listening to other sources
You can connect up to three external sources
(TV, satellite receiver, etc.) to this system,
including one digital source. See also
Use the ꢂ/ꢃ (cursor left/right)
buttons to choose ‘St. Memory?’ then
press ENTER.
Connecting auxiliary components on page 68.
4
Use the ꢀ/ꢁ (cursor up/down)
buttons to select the station preset you
want.
There are 30 preset locations; each can store
one station preset.
STANDBY/ON
CD
FM/AM
TUNER
L1/L2
LINE
DVD
TV
DISPLAY
OPEN CLOSE
0
8
5
Press ENTER to save the station preset.
1
3
7
¡
4
4
• If the system is unplugged from the power
supply completely, saved stations will
remain for several days, after which you’ll
have to save them again.
1
If the system isn’t already on, press ꢃ
STANDBY/ON to switch on.
Also make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2
Select the source you want to listen to.
• If you’re using the remote control, press
TV to select the TV IN input, or use the
LINE (L1/L2) button to select the LINE 1 or
LINE 2 input.
Listening to station presets
Make sure the TUNER function is
1
selected.
2
Use the ST +/– buttons to select a
3
If necessary, start playback of the
station preset.
external source.
28
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Home theater sound
04
Chapter 4
Home theater sound
Using this system you can enjoy listening to
sources, analog or digital, in either stereo or
surround sound.
Listening in surround sound
You can listen to any source—stereo or
multichannel, analog or digital—in surround
sound. Surround sound is generated from
stereo sources using one of the Dolby Pro
Logic decoding modes.
Auto listening mode
The Auto listening mode is the simplest way
to listen to any source as it was mastered: the
output from the speakers mirrors the
channels in the source material.
BASS MODE
VIRTUAL SB
AUTO
SURROUND ADVANCED
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
3
BASS MODE DIALOGUE
VIRTUAL SB
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
AUTO
SURROUND ADVANCED
4
QUIET/
TIMER/
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
DIMMER
7
MIDNIGHT
CLOCK
SUBTITLE
8
9
HOME
MENU
FOLDER–
0
FOLDER+
ENTER
ZOOM
1
TOP MENU
2
CLR
3
SYSTEM
ROOM SETUP
CH LEVEL
6
MAIN
SUB
TEST TONE
5
SETUP
4
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
FOLDER–
0
FOLDER+
ENTER
•
Press SURROUND repeatedly to select
CLR
ROOM SETUP
MAIN
SUB
a listening mode (or press SURROUND
then use the ꢀ/ꢁ (cursor up/down)
buttons).
The listening mode choices that appear in the
display will vary according to the type of
source that’s playing.
•
Press AUTO to select the ‘Auto’
listening mode.
If the source is Dolby Digital or DTS, the
2DOLBY DIGITAL or DTS indicator on the
front panel lights. The STEREO indicator
lights when playing a stereo source.
• Auto – Auto listening mode (see above)
• Dolby Digital / DTS – Dolby Digital or
DTS decoding (depending on the source).
For a multichannel source, this will be the
same as Auto.
• Pro Logic – 4.1 channel surround sound
for use with any two-channel source
• Any previously active Dolby Pro Logic or
Advanced Surround mode is canceled
when Auto listening mode is selected.
• PL II Movie – Pro Logic II 5.1 channel
surround sound, especially suited to
movie sources, for use with any two-
channel source
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Home theater sound
• PL II Music – Pro Logic II 5.1 channel
surround sound, especially suited to
music sources, for use with any two-
channel source (see also Dolby Pro Logic
II Music settings below)
• Pnrm. (Panorama): Creates more
spacious surround sound
3
Use the ꢀ/ꢁ (cursor up/down)
buttons to adjust the setting.
Center Width is adjustable between 0 and 7;
Dimension between –3 and +3. Panorama is
On or Off.
• Stereo – See Listening in stereo below
4
Press ENTER to confirm.
• See also Using the Advanced Surround
effects below, for further stereo and
surround playback options.
Listening in stereo
You can listen to any source—stereo or
multichannel, analog or digital—in stereo.
When playing a multichannel source, stereo
sound is created by downmixing all channels
to the front left/right speakers and the
subwooofer.
•
You can’t use the Surround modes with
high sampling rate 88.2 / 96 kHz sources.
• When listening in Dolby Digital / DTS
mode, two-channel material will
BASS MODE
VIRTUAL SB
AUTO
SURROUND ADVANCED
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
automatically be played in surround
sound using Dolby Pro Logic decoding.
HOME
MENU
ZOOM
1
TOP MENU
2
3
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
• Dolby Digital / DTS sources that use only
the center channel cannot be played back
in surround sound.
4
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
FOLDER–
0
FOLDER+
ENTER
CLR
ROOM SETUP
MAIN
SUB
Dolby Pro Logic II Music settings
When listening in Dolby Pro Logic II Music
mode, there are three further parameters you
can adjust: Center Width, Dimension, and
Panorama.
•
Press SURROUND repeatedly until
‘Stereo’ shows in the display.
Any active Advanced Surround mode is
canceled.
1
With Dolby Pro Logic II Music mode
active, press SOUND.
2
Use the ꢂ/ꢃ (cursor left/right)
buttons to select ‘C Width’, ‘Dimen.’ or
‘Pnrm.’
• C Width (Center Width): Makes the
center channel wider (higher settings) or
narrower (lower settings)
• See also Using the Advanced Surround
effects below, for further stereo and
surround playback options.
• Dimen. (Dimension): Makes the sound
more distant (minus settings), or more
forward (positive settings)
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Home theater sound
04
•
Press ADVANCED to select an
Listening with headphones
Advanced Surround mode (or press
ADVANCED then use the ꢀ/ꢁ (cursor up/
down) buttons).
When headphones are connected, only the
Stereo (default) and Phones Surround
(virtual surround sound for headphones)
modes are available.
Press repeatedly to select from:
• Adv. Music – Gives a concert hall-type
sound
When you connect a pair of headphones, the
listening mode automatically changes to
Stereo. When you disconnect them it reverts
to the previous mode.
• Adv. Movie – Gives a movie theater-type
sound
• Expanded – Creates an extra wide stereo
field
•
With headphones connected, press
ADVANCED to select ‘Phones Surround’ or
SURROUND to select ‘Stereo’.
• TV Surr. – Designed for mono or stereo TV
broadcasts and other sources
• Sports – Designed for sports and other
programs based on commentary
Using the Advanced Surround
effects
• Game – Creates surround sound from
video game sources
Advanced Surround effects can be used with
multichannel or stereo sources for a variety of
additional surround sound effects.
• ExPwrSurr. (Extra Power Surround) –
Gives additional energy and width to
stereo sources
DISPLAY
OPEN CLOSE
0
8
3
7
• Virtual – Creates the impression of
surround sound from just the front
speakers
1
¡
4
4
• 5ch Stereo – Designed to give powerful
DVD MENU
RETURN
surround sound to stereo music sources
TUNE+
ST–
ST+
ENTER
TUNE–
MUTE
SOUND
MASTER
VOLUME
• You can’t use the Advanced Surround
modes with high sampling rate
88.2 / 96 kHz sources.
TV CONTROL
CH
INPUT
VOL
• You can use any of the above Advanced
Surround modes with any type of source.
The descriptions are given only as a guide.
BASS MODE DIALOGUE
AUTO
SURROUND ADVANCED
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
3
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
4
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
FOLDER–
0
FOLDER+
ENTER
CLR
ROOM SETUP
MAIN
SUB
31
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Home theater sound
• Dialog Mid – Moderate dialog
enhancement
Adjusting the Advanced Surround
effect level
• Dialog Max – Strong dialog
enhancement
• Default setting: 70
You can emphasize or reduce the effect of the
Advanced Surround modes as you like. For
each Advanced Surround mode you can set
the effect level independently.
• You can’t use Dialog Enhancement with
high sampling rate 88.2 / 96 kHz sources.
1
With one of the Advanced Surround
modes active, press SOUND.
2
Use the ꢀ/ꢁ (cursor left/right)
Listening with a virtual
buttons to select ‘Effect’.
surround back speaker
3
Use the ꢂ/ꢃ (cursor up/down)
• Default setting: Vir. SB Off
buttons to adjust the effect level.
The effect level can be adjusted from 10 (min)
to 90 (max).
The Virtual Surround Back feature can be
used when listening in surround sound to
simulate an added surround back channel. In
a real theater the surround back speaker
would be directly behind you, creating more
cohesive and realistic surround sound.
4
Press ENTER to confirm.
Enhancing dialogue
• Default setting: Dialog. Off (European
BASS MODE DIALOGUE
VIRTUAL SB
AUTO
SURROUND
model) / Dialog. Mid (All other models)
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
The Dialogue Enhancement feature is
designed to make the dialog stand out from
other background sounds in a TV or movie
soundtrack.
HOME
MENU
ZOOM
1
TOP MENU
2
3
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
4
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
FOLDER–
0
FOLDER+
ENTER
BASS MODE DIALOGUE
VIRTUAL SB
CLR
AUTO
ADVANCED
ROOM SETUP
MAIN
SUB
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
3
•
Press VIRTUAL SB repeatedly to switch
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
4
between ‘Vir. SB On’ and ‘Vir. SB Off’.
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
FOLDER–
0
FOLDER+
ENTER
CLR
ROOM SETUP
MAIN
SUB
• You can’t use Virtual Surround Back
when listening in Stereo or Virtual
listening modes.
•
Press DIALOGUE to select the amount
dialog enhancement.
Press repeatedly to select from:
• If there is no surround channel, Virtual
Surround Back has no effect.
• Dialog Off – No dialog enhancement
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Home theater sound
04
• You can’t use the Virtual Surround
Back effect with high sampling rate 88.2 /
96 kHz sources, or with headphones.
Adjusting the bass and treble
• Default setting: Treble: +1, Bass: 0
(European model) / Treble: +2, Bass: 0 (All
other models)
Using Quiet and Midnight
Use the bass and treble controls to adjust the
overall tone. Bass and treble adjustment is
not possible when the Quiet or Midnight
modes are active.
listening modes
• Default setting: Off
The Quiet listening feature reduces excessive
bass or treble in a sound source. You can use
this feature if the music is a little bit harsh and
you would like a smoother sound.
DISPLAY
OPEN CLOSE
0
8
3
7
1
¡
4
4
The Midnight listening feature allows you to
hear effective surround sound of movies at
low volume levels. The effect automatically
adjusts according to the volume at which
you’re listening.
DVD MENU
RETURN
TUNE+
ST–
ST+
ENTER
TUNE–
MUTE
SOUND
BASS MODE DIALOGUE
VIRTUAL SB
MASTER
VOLUME
AUTO
SURROUND ADVANCED
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
1
2
Press SOUND.
ZOOM
1
TOP MENU
2
3
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
Use the ꢀ/ꢁ (cursor left/right)
4
QUIET/
TIMER/
buttons to select ‘Bass’ or ‘Treble’.
DIMMER
7
MIDNIGHT
CLOCK
8
9
FOLDER–
0
FOLDER+
ENTER
3
Use the ꢂ/ꢃ (cursor up/down)
CLR
ROOM SETUP
MAIN
SUB
buttons to adjust the sound.
The bass and treble can be adjusted from –3
to +3.
•
Press QUIET/MIDNIGHT repeatedly to
switch between ‘Quiet’, ‘Midnight’ and
‘Off’.
4
Press ENTER to confirm.
33
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Home theater sound
Boosting the bass level
Muting the sound
There are three bass modes you can use to
enhance the bass in a source.
Use the MUTE button if you need to
momentarily turn off all sound from the
speakers.
BASS MODE DIALOGUE
VIRTUAL SB
SURROUND ADVANCED
DVD MENU
RETURN
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
TUNE+
ST–
ST+
HOME
MENU
ZOOM
1
TOP MENU
2
ENTER
3
SYSTEM
TUNE–
MUTE
SOUND
TEST TONE
5
CH LEVEL
6
SETUP
4
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
MASTER
VOLUME
FOLDER–
0
FOLDER+
ENTER
CLR
ROOM SETUP
MAIN
SUB
•
Press MUTE to mute the volume.
To cancel, adjust the volume or press MUTE
again.
•
Press BASS MODE repeatedly to
choose an option that fits the source
you’re listening to.
• Music – Can be used with music to give a
deeper bass sound
• Cinema – Good for action movies or
movies with lots of sound effects
• P. Bass – Can be used with music sources
to bring the beat of the music (or
soundtrack) to the forefront
• Off
• You can’t use the bass mode when the
headphones are connected.
34
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
05
CPhlaapteyr i5ng discs
1
Press HOME MENU and select ‘Disc
Introduction
Navigator’ from the on-screen display.
Alternatively, if a VR format DVD-RW, CD,
Video CD/Super VCD or WMA/MP3/JPEG disc
is loaded, you can press DVD MENU, which
takes you straight to the Disc Navigator
screen.
Most of the features described in this chapter
make use of on-screen displays. For an expla-
nation of how to navigate these, see Using the
on-screen displays on page 20.
Many of the functions covered in this chapter
apply to DVD discs, Video CD/Super VCDs,
CDs and WMA/MP3/JPEG discs, although
the exact operation of some varies slightly
with the kind of disc loaded.
HOME MENU
DVD
Play Mode
Video Adjust
Some DVD discs restrict the use of some
functions (random or repeat, for example).
This is not a malfunction.
Disc Navigator
Initial Settings
When playing Video CD/Super VCDs, some of
the functions are not available during PBC
playback. If you want to use them, start the
disc playing using a number button to select
a track.
2
Select what you want to play.
Depending on the type of disc you have
loaded, the Disc Navigator looks slightly
different.
The screen for DVD discs shows the titles on
the left and the chapters on the right. Select a
title, or a chapter within a title.
• To access functions printed in green on
the remote, move the slider switch from
MAIN to SUB.
Disc Navigator
Title 1-10
Chapter 1-3
DVD
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
Using the Disc Navigator to
browse the contents of a disc
Use the Disc Navigator to browse through the
contents of a disc to find the part you want to
play. You can use the Disc Navigator when a
disc is playing or stopped.
For a VR (Video Recording) mode DVD-RW
disc select beween the Playlist and Original
areas of the disc, or a title. Press ꢃ (cursor
right) to preview the title.
• It’s not possible to switch between Orig-
inal and Playlist during playback.
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing discs
• Not all VR format DVD-RW discs have a
Playlist.
• It’s not possible to use the Disc Navigator
when playing a Video CD/Super VCD in
PBC mode, or an unfinalized CD-R/RW
disc.
Disc Navigator
Title(1-03)
DVD-RW
Original
• Another way to find a particular place on
a disc is to use one of the search modes.
See Searching a disc on page 43.
01. 3/31 FIRST LEAGUE
02. 4/28 SECOND LEAGUE
03. 4/29 FINAL ROUND
Play List
Scanning discs
You can fast-scan discs forward or backward
at various different speeds.
The screen for CDs and Video CD/Super VCDs
shows a list of tracks.
1
During playback, press ꢅ or ꢈ to
Disc Navigator
Track 1-10
start scanning.
CD
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Track 08
2
Press repeatedly to increase the scan-
ning speed.
• WMA/MP3 tracks can only be scanned at
one speed.
• The scanning speed is shown on-screen.
3
To resume normal playback, press ꢄ
The screen for an WMA/MP3 disc shows the
folder names on the left and the track names
on the right (note that if there are more than
16 folders or names that contain accented or
non-roman characters, tracks and folders
may show up with generic names – F_033,
T_035, etc.).
(play).
• Sound can be heard while scanning audio
CDs and WMA/MP3 discs.
• When scanning a Video CD/Super VCD or
WMA/MP3 track, playback automatically
resumes at the end or beginning of the
track.
• There is no sound while scanning DVDs
and Video CD/Super VCDs, and no subti-
tles while scanning DVDs.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached on a DVD disc.
Select a folder, or a track within a folder.
Disc Navigator
Folder 1-17
Track 1-10
WMA/MP3
001. ACP
002. Nth Degree
003. Pfeuti
001. Gravity deluxe
002.Tesla's patent
003. Border dispute
004. Delayed by rain
005. Accident incident
006. Pigeon post
004. Live
005. Glitch music
006. CodHead
007.Thermo
008. Missing Man
007. Outernational
008. Vacuum tube
Playback starts after you press ENTER.
Playing in slow motion
You can play DVDs and Video CD/Super VCDs
at four different forward slow motion speeds.
DVD discs can also be played at two reverse
speeds.
• The Disc Navigator is not available unless
there is a disc loaded.
36
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
05
1
2
During playback, press ꢋ (pause).
Press and hold ꢆ/ꢇ or ꢉ/ꢊ until
• The picture quality when using frame
reverse is not as good as frame advance.
slow motion playback starts.
• The slow motion speed is shown on-
screen.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
• There is no sound during slow motion
playback.
• When changing direction with a DVD
disc, the picture may ‘move’ in an unex-
pected way. This is not a malfunction.
3
Press repeatedly to change the slow
motion speed.
• The slow motion speed is displayed on-
screen.
Looping a section of a disc
4
To resume normal playback, press ꢄ
The A-B Repeat function allows you to specify
two points (A and B) within a track (CD and
Video CD/Super VCD) or title (DVD) that form
a loop which is played over and over.
(play).
• Video CD/Super VCD and VR format DVD-
RWs only supports forward slow motion
playback.
• You can’t use A-B Repeat with WMA/MP3
discs, Video CD/Super VCDs in PBC
mode, or unfinalized CD-R/RW discs.
• The picture quality during slow motion
playback is not as good as during normal
playback.
1
During playback, press HOME MENU
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
and select ‘Play Mode’.
2
Select ‘A-B Repeat’ from the list of
functions on the left.
Frame advance/frame reverse
Play Mode
You can advance or back up a DVD disc
frame-by-frame. With Video CD/Super VCDs
and VR format DVD-RWs, you can only use
frame advance.
A-B Repeat
Repeat
A(Start Point)
B(End Point)
Off
Random
Program
Search Mode
1
During playback, press ꢋ (pause).
2
Press ꢆ/ꢇ or ꢉ/ꢊ to reverse or
advance a frame at a time.
3
To resume normal playback, press ꢄ
(play).
37
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing discs
3
Press ENTER on ‘A(Start Point)’ to set
Using the OSD
During playback, press HOME MENU
the loop start point.
1
and select ‘Play Mode’.
Play Mode
2
Select ‘Repeat’ from the list of
A-B Repeat
Repeat
A(Start Point)
B(End Point)
Off
functions on the left.
Random
Program
Search Mode
Play Mode
A-B Repeat
Repeat
Title Repeat
Chapter Repeat
Repeat Off
Random
4
Press ENTER on ‘B(End Point)’ to set
Program
Search Mode
the loop end point.
Play Mode
3
Select a repeat play option.
A-B Repeat
Repeat
A(Start Point)
B(End Point)
Off
If program play is active, select Program
Repeat to repeat the program list, or Repeat
Off to cancel.
Random
Program
Search Mode
For DVD discs, select Title Repeat or
Chapter Repeat (or Repeat Off).
After pressing ENTER, playback jumps back
to the start point and plays the loop.
Play Mode
• The minimum loop time is 2 seconds.
A-B Repeat
Repeat
Title Repeat
Chapter Repeat
Repeat Off
Random
5
To resume normal playback, select
‘Off’ from the menu.
Program
Search Mode
Using repeat play
For CDs and Video CD/Super VCDs, select
Disc Repeat or Track Repeat (or Repeat
Off).
There are various repeat play options,
depending on the kind of disc loaded. It’s also
possible to use repeat play together with
program play to repeat the tracks/chapters in
the program list (see Creating a program list
on page 40).
Play Mode
A-B Repeat
Repeat
Disc Repeat
Track Repeat
Repeat Off
Random
Program
Search Mode
• You can’t use Repeat play with Video CD/
Super VCDs in PBC mode, or unfinalized
CD-R/RW discs.
38
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
05
For WMA/MP3 discs, select Disc Repeat,
Folder Repeat or Track Repeat (or Repeat
Off).
• You can’t use random play with VR format
DVD-RW discs, Video CD/Super VCDs
playing in PBC mode, or while a DVD disc
menu is being displayed.
Play Mode
A-B Repeat
Repeat
Disc Repeat
Folder Repeat
Track Repeat
Repeat Off
Random
Program
Using the OSD
Search Mode
1
During playback, press HOME MENU
and select ‘Play Mode’.
2
Select ‘Random’ from the list of
Using the front panel display
During playback, press REPEAT to
functions on the left.
•
Play Mode
select a repeat play option.
Press repeatedly until the repeat play option
you want is shown in the display.
A-B Repeat
Repeat
Random Title
Random Chapter
Random Off
Random
The repeat options are the same as those
available from the OSD (see above).
Program
Search Mode
3
Select a random play option.
For DVD discs, select Random Title or
Random Chapter, (or Random Off).
• If you’ve created a program list, Program
Repeat is also available.
• During playback, you can cancel repeat
Play Mode
play by pressing CLR.
A-B Repeat
Repeat
Random Title
Random Chapter
Random Off
Random
Program
Search Mode
• You can’t use repeat and random play at
the same time.
• If you switch camera angle during repeat
play, repeat play is canceled.
For CDs and Video CD/Super VCDs, select On
or Off to switch random play on or off.
Play Mode
Using random play
A-B Repeat
Repeat
On
Off
Use the random play function to play titles or
chapters (DVD-Video) or tracks (CD, Video
CD/Super VCD and WMA/MP3 discs) in a
random order.
Random
Program
Search Mode
You can set the random play option when a
disc is playing or stopped.
39
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing discs
For WMA/MP3 discs, select Random All (all
folders) or Random Track (current folder
only), (or Random Off).
• You can’t use Program play with VR
format DVD-RW discs, Video CD/Super
VCDs playing in PBC mode, or while a
DVD disc menu is being displayed.
Play Mode
A-B Repeat
Repeat
Random All
Random Track
Random Off
Random
Program
Using the OSD
Search Mode
1
During playback, press HOME MENU
and select ‘Play Mode’.
2
Select ‘Program’ from the list of
functions on the left.
• You can also use the RANDOM button on
the remote to select a random play mode.
The random mode is indicated in the front
panel display and on-screen. The random
modes available are the same as when
choosing from the Play Mode menu.
Press ENTER to start random play.
Play Mode
A-B Repeat
Repeat
Create/Edit
Playback Start
Playback Stop
Program Delete
Program Memory
Random
Program
Search Mode
ꢄ Off
• To stop the disc and cancel random play-
back, press ꢂ (stop).
3
Select ‘Create/Edit’ from the list of
program options.
• To cancel random playback without stop-
ping playback, press CLR. The disc will
play to the end, then stop.
Play Mode
A-B Repeat
Repeat
Create/Edit
• During random play, the ꢌ and ꢍ
buttons function a little differently to
normal: ꢌ returns to the beginning of
the current track/chapter. You can't go
back further than this. ꢍ selects
another track/chapter at random from
those remaining.
Playback Start
Playback Stop
Program Delete
Program Memory
Random
Program
Search Mode
ꢄ Off
The Program edit screen that appears
depends on the kind of disc loaded.
• You can't use random play together with
program or repeat play.
On the left side is the program list, then to the
right is a list of titles (if a DVD disc is loaded),
tracks (for CDs and Video CD/Super VCDs), or
folder names (for WMA/MP3 discs). On the
far right is a list of chapters (for DVD) or track
names (for WMA/MP3).
Creating a program list
This feature lets you program the play order of
titles/chapters/folders/tracks on a disc.
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
05
4
Select a title, chapter, folder or track
• To add a folder, select the folder.
for the current step in the program list.
For a DVD disc, you can add a whole title, or a
chapter within a title to the program list.
Program
Program Step
Folder 1-6
Track 1-10
01. 001
02.
001. ACP
002. Nth Degree
003. Pfeuti
004. Live
005. Glitch music
006. CodHead
001. Gravity deluxe
002.Tesla's patent
003. Border dispute
004. Delayed by rain
005. Accident incident
006. Pigeon post
• To add a title, select the title.
03.
04.
05.
06.
07.
08.
Program
Program Step
Title 1~38
Chapter 1~4
007. Outernational
008. Vacuum tube
01. 01
02.
03.
04.
05.
06.
07.
08.
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
Chapter 004
• To add a track, first find the folder, then
press ꢃ (cursor right) and select a track
name from the list.
Program
• To add a chapter, first highlight the title,
then press ꢃ (cursor right) and select a
chapter from the list.
Program Step
Folder 1-6
Track 1-10
01. 001-003
001. ACP
002. Nth Degree
003. Pfeuti
004. Live
005. Glitch music
006. CodHead
001. Gravity deluxe
002.Tesla's patent
003. Border dispute
004. Delayed by rain
005. Accident incident
006. Pigeon post
02.
03.
04.
05.
06.
07.
08.
Program
Program Step
Title 1-38
Chapter 1-4
007. Outernational
008. Vacuum tube
01. 01-003
02.
03.
04.
05.
06.
07.
08.
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
Chapter 004
After pressing ENTER to select the title/
chapter/folder/track, the step number auto-
matically moves down one.
5
list.
Repeat step 4 to build up a program
For a CD or Video CD/Super VCD, select a
track to add to the program list.
A program list can contain up to 24 titles/
chapters/folders/tracks.
Program
Program Step
Track 1~12
6
To play the program list, press ꢄ
01. 04
02.
03.
04.
05.
06.
07.
08.
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Track 08
(play).
Program play remains active until you turn off
program play (see below), erase the program
list (see below), eject the disc or switch off the
player.
For an WMA/MP3 disc, you can add a whole
folder, or a track within a folder to the
program list.
• To save your program list and exit the
program edit screen without starting play-
back, press HOME MENU. (Don’t press
RETURN – your program list won’t be
saved.)
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing discs
• During program play, press ꢍto skip to
the next program step.
Other functions available from the OSD
program menu
As well as creating and editing a program list,
you can start program play, cancel program
play, erase the program list, and memorize a
program list from the Play Mode menu.
• Press CLR during playback to switch off
program play. Press while stopped to
erase the program list.
Editing a program list using the OSD
After creating a program list, you can add,
delete and change steps.
1
During playback, press HOME MENU
and select ‘Play Mode’.
2
Select ‘Program’ from the list of
1
During playback, press HOME MENU
functions on the left.
and select ‘Play Mode’.
Play Mode
2
Select ‘Program’ from the list of
functions on the left.
A-B Repeat
Repeat
Create/Edit
Playback Start
Playback Stop
Program Delete
Program Memory
Random
3
Select ‘Create/Edit’ from the list of
Program
program options.
Search Mode
ꢄ Off
4
To clear a step, highlight the step
number and press CLR.
3
Select a program play function.
• Create/Edit – See above
5
To insert a step in the middle of the
program list, highlight the step where you
want the new step to appear, then select
a title/chapter/folder/track to add.
After pressing ENTER, the new step is
inserted into the list.
• Playback Start – Starts playback of a
saved program list
• Playback Stop – Turns off program play,
but does not erase the program list
• Program Delete – Erases the program
list and turns off program play
6
To add a step to the end of the
program list, highlight the next free step
then select a title/chapter/folder/track to
add.
• Program Memory (DVD only) – Select
On to save the program list for the disc
loaded. (Select Off to cancel the program
memory for the disc loaded)
• To save your program list and exit the
program edit screen without starting play-
back, press HOME MENU.
Using the front panel display
Even though the OSD is available for CDs and
WMA/MP3 discs, the front panel display
provides enough information to make a
program list easily. If a disc is playing, stop it
first.
• If you want to exit the program edit screen
without saving the changes you made,
press RETURN.
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
05
1
Press PROGRAM.
• You can save program lists for up to 24
discs. After that, the oldest one is
replaced with the new one saved.
You’re prompted to enter a track or folder for
the first step in the program list.
P - 0 0
0 0 0
Searching a disc
You can search DVD discs by title or chapter
number, or by time. CDs can be searched by
track number, and Video CD/Super VCDs by
track number or time. WMA/MP3 discs can
be searched by folder or track number.
2
Use ꢀ/ꢁ (cursor up/down) to select a
track or a folder, then press ENTER.
• For WMA/MP3 discs only: To select an
individual track within a folder, use the ꢀ/
ꢁ (cursor up/down) buttons to select the
folder, then press ꢃ, then use ꢀ/ꢁ
(cursor up/down) to select a track. Press
ENTER.
1
During playback, press HOME MENU
and select ‘Play Mode’.
2
Select ‘Search Mode’ from the list of
functions on the left.
P - 0 1
5 3 7
The search options that appear depend on the
kind of disc loaded. The screen below shows
the DVD search options.
Wait for the display to prompt you after
completing each selection. If you make a
mistake, press CLR to delete the last (most
recently) programmed track.
Play Mode
A-B Repeat
Repeat
Title Search
3
list.
Repeat step 2 to build up a program
Chapter Search
Time Search
Random
Program
A program list can contain up to 24 steps.
Search Mode
4
To play the program list, press ꢄ
(play).
Program play remains active until you press
ꢂ (stop), clear the playlist (see below), eject
the disc or switch off the player.
3
4
Select a search mode.
Use the number buttons to enter a
title, chapter, folder or track number, or a
time.
Clearing the program list
You must clear the program list to program a
new one.
Play Mode
A-B Repeat
Repeat
Title Search
Input Chapter
Chapter Search
Time Search
1
2
If a disc is playing, press ꢂ (stop).
0
0
1
Random
Program
Press CLR.
Search Mode
• For a time search, enter the number of
minutes and seconds into the currently
playing title (DVD) or track (Video CD/
Super VCD) you want playback to resume
• Program lists are saved for the DVD disc
loaded. When you load a disc with a saved
program list, program play is automati-
cally turned on.
43
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing discs
from. For example, press 4, 5, 0, 0 to have
playback start from 45 minutes into the
disc. For 1 hour, 20 minutes and 30
seconds, press 8, 0, 3, 0.
•
Press AUDIO repeatedly to select an
audio language option.
Current /Total
1/2
Audio
French
Dolby Digital 3/2.1CH
5
Press ENTER to start playback.
• Some discs only allow you to change
audio language from the disc menu.
Press TOP MENU to access.
• The disc must be playing in order to use
time search.
• Search functions are not available with
Video CD/Super VCDs in PBC mode, or
unfinalized CD-R/RW discs.
• To set audio language preferences, see
Audio Language on page 62.
Switching VR format DVD-RW
audio channel
Switching subtitles
Some DVD discs have subtitles in one or
more languages; the disc box will usually tell
you which subtitle languages are available.
You can switch subtitle language during play-
back.
When playing a VR format DVD-RW disc
recorded with dual-mono audio, you can
switch between the main, sub, and mixed
channels during playback.
1
Press AUDIO repeatedly to select an
•
Press SUBTITLE repeatedly to select a
audio channel option.
subtitle option.
Current / Total
1/2
Audio
1L
Dolby Digital 1+1CH
Subtitle
English
Switching the Video CD/Super
VCD audio channel
• Some discs only allow you to change
subtitle language from the disc menu.
Press TOP MENU to access.
When playing a Video CD/Super VCD, you can
switch between stereo, just the left channel or
just the right channel.
• To set subtitle preferences, see Subtitle
Language on page 63.
Super VCD supports four channels of audio.
You can switch the playback channel between
Stereo 1, Left 1, Right 1, Stereo 2, Left 2 and
Right 2 (note that not all Super VCDs have a
second soundtrack).
Switching the DVD audio
language
•
Press AUDIO repeatly to select an
When playing a DVD disc recorded with
dialog in two or more languages, you can
switch audio language during playback.
audio channel option.
Audio
Stereo
44
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
05
Zooming the screen
Using the zoom feature you can magnify a
part of the screen by a factor of 2 or 4, while
watching a DVD or Video CD/Super VCD.
• We do not recommend using DVD disc
menus when the screen is zoomed as
menu options will not be highlighted.
1
During playback, use the ZOOM
• If you are displaying subtitles, these will
disappear when the screen is zoomed.
They will reappear when you return the
screen to normal.
button to select the zoom factor.
• Normal
• 2x
• 4x
Switching camera angles
Normal
Some DVD discs feature scenes shot from
two or more angles—check the disc box for
details.
When a multi-angle scene is playing, a
icon appears on screen to let you know that
other angles are available (this can be
switched off if you prefer—see Angle Indicator
on page 64).
Zoom 2x
Zoom 2x
Zoom 4x
•
During playback (or when paused),
Zoom 4x
press ANGLE to switch angle.
Displaying disc information
Various track, chapter and title information,
as well as the video transmission rate for DVD
discs, can be displayed on-screen while a disc
is playing.
• Since DVD and Video CD/Super VCD have
a fixed resolution, picture quality will dete-
riorate, especially at 4x zoom. This is not a
malfunction.
OSD disc information
2
Use the cursor buttons to change the
zoomed area.
•
To show/switch the information
You can change the zoom factor and the
zoomed area freely during playback.
displayed, press DISPLAY.
When a disc is playing, the information
appears at the top of the screen. Keep
pressing DISPLAY to change the displayed
information.
• If the navigation square at the top of the
screen disappears, press ZOOM again to
display it.
45
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing discs
• DVD displays
Play
DVD
ꢀ
• You can see disc information (number of
titles/chapters, tracks, folders and so on)
from the Disc Navigator screen. See
Using the Disc Navigator to browse the
contents of a disc on page 35.
Current / Total Elapsed
11/38 2.05
Remain
4.57
Total
7.02
Title
French
Audio Dolby Digital 3/2.1CH
English
1
Subtitle
Angle
Play
DVD
ꢀ
Current / Total Elapsed
11/38 2.05
Remain
4.57
Total
7.02
Chapter
Tr. Rate
8.6Mbps
Front panel display information
Limited disc information also appears in the
front panel display. Press DISPLAY to change
the displayed information.
• VR format DVD-RW displays
Play
Title
DVD-RW
Original
Current / Total Elapsed
1/32 0.08
ꢀ
Remain
30.22
Total
30.30
1
- -
• DVD / DVD-RW displays
Title no.
Audio Dolby Digital
2/0CH
Subtitle
2
2
8 4 9
Play
DVD-RW
Original
ꢀ
Chapter no.
Elapsed title time
Current / Total
1/1
Chapter
Tr. Rate
4.3Mbps
Title no.
Remaining title time
2 TTL 1 0 7 0 0
0 4 2
• CD and Video CD/Super VCD displays
Play
CD
ꢀ
Title no.
2
2
Current / Total
2/16
Elapsed
1.07
Remain
4.40
Total
5.47
Chapter no.
Remaining chapter
time
Track
Play
Disc
CD
ꢀ
Elapsed
28.00
Remain
30.20
Total
58.20
• CD and Video CD/Super VCD displays
Track no.
• WMA/MP3 disc displays
4
1 1 6
Elapsed track time
Play
MP3
ꢀ
Current / Total
1/17
Elapsed
0.18
Remain
12.42
Total
13.00
Track
Track no.
Remaining track time
4
3 2 0
Track Name
Outernational
Play
MP3
ꢀ
Remaining disc time
Disc
5 3 1 5
Current / Total
2/7
Folder
Folder Name ACP
• WMA / MP3 disc displays
Track no.
• JPEG disc displays
2
0 3 5
Play
JPEG
ꢀ
Elapsed track time
Current / Total
1/40
File
File Name
FL000001
Track name
E V E R Y B OD
B E S T _O F _
Play
JPEG
ꢀ
Folder name
Current / Total
2/6
Folder
Folder Name Holiday
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing discs
05
• JPEG disc displays
File name
T I G E R_ 0 1
Folder name
Z OO _ T R I P
47
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
Viewing JPEG discs
Chapter 6
Viewing JPEG discs
Playing a JPEG slideshow
After loading a CD/CD-R/RW containing
• The ꢁ, ANGLE and ZOOM buttons do not
work while the display shows LOADING.
JPEG pictures, press ꢀ to start a slideshow
from the first folder/picture on the disc. The
player displays the pictures in each folder in
alphabetical order.
• The time it takes for the player to load a file
increases with large file sizes.
Pictures are automatically adjusted so that
they fill as much of the screen as possible (if
the aspect ratio of the picture is different to
your TV screen you may notice black bars at
the sides, or at the top and bottom of the
screen).
• Up to 999 files are viewable on a disc. If
there are more files than this on a disc,
only the first 999 files are viewable.
Using the JPEG Disc Navigator
and Photo Browser
While the slideshow is running:
Use the JPEG Disc Navigator to find a
particular folder or picture by filename on the
disc in the play position; use the Photo
Browser to find a picture within a folder by
thumbnail image.
Button
What it does
ꢁ
Pauses the slideshow; press
again to restart.
ꢂ
Displays the previous picture.
Displays the next picture.
1
Press DVD MENU to display the Disc
ꢃ
Navigator screen.
ANGLE
Pauses the slideshow and
rotates the currently displayed
picture 90º clockwise. Press ꢀ
(play) to restart slideshow.
Disc Navigator
Folder 1-2
File 1-40
001. FL000001
002. FL000002
003. FL000003
004. FL000004
005. FL000005
006. FL000006
007. FL000007
008. FL000008
JPEG
001. F_001
002. F_002
ZOOM
Pauses the slideshow and zooms
the screen (see below). Press ꢀ
(play) to restart slideshow.
Displays the Disc Navigator
screen (see below).
DVD
MENU
The left column shows the folders on the disc,
the right column shows the files in a folder.
2
Use the cursor buttons (ꢀ/ꢁ/ꢂ/ꢃ) to
Skips to the next/previous folder
when playing a JPEG disc.
FOLDER +/
FOLDER –
navigate.
When a file is highlighted, a thumbnail image
is displayed.
48
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing JPEG discs
06
• When a folder is highlighted you can
press ENTER to open the Photo Browser
screen for that folder. See below for more
on using the Photo Browser.
Zooming the screen
Using the zoom feature you can magnify a
part of the screen by a factor of 2 or 4, while
viewing pictures from a JPEG disc.
3
To resume the slideshow from the
1
During slideshow playback, use the
highlighted file, press ENTER.
ZOOM button to select the zoom factor.
• Normal
Using the Photo Browser
The Photo Browser displays nine thumbnail
images at a time from the current folder.
• 2x
• 4x
Normal
1
From the Disc Navigator screen,
highlight a folder to display then press
ENTER.
The Photo Browser screen opens with the first
nine pictures displayed as thumbnails.
Zoom 2x
Zoom 4x
Photo Browser
2 / 40 Live at Soft
2
Use the cursor buttons (ꢀ/ꢁ/ꢂ/ꢃ) to
highlight a thumbnail picture.
• Use the track skip buttons (ꢌ and ꢍ)
to see the previous / next page of
thumbnails. Keep the button pressed if
you want to skip several pages; release
when you reach the page you want.
• The slideshow is paused when the screen
is zoomed.
• Since JPEG pictures have a fixed
resolution, picture quality may
deteriorate, especially at 4x zoom. This is
not a malfunction.
• To return to the Disc Navigator screen,
press RETURN.
2
Use the cursor buttons (ꢀ/ꢁ/ꢂ/ꢃ) to
3
Press ENTER to display the selected
change the zoomed area.
You can change the zoom factor and the
zoomed area freely.
thumbnail full size on screen.
The slideshow resumes from the selected
picture.
3
To resume the slideshow, press ꢄ
(play).
49
En
Download from Www.Somanuals.com. All Manuals Search And Download.
07
More tuner features: RDS
Chapter 7:
More tuner features: RDS
European model only
Sport – Sport
An introduction to RDS
Educate – Educational material
Radio Data System, or RDS as it’s usually
known, is a system used by FM radio stations
to provide listeners with various kinds of
information—the name of the station and the
kind of show they’re broadcasting, for
example. This information shows up as text
on the display, and you can switch between
the kind of information shown. Although you
don’t get RDS information from all FM radio
stations, you do with most.
Drama – Radio plays or serials
Culture – National or regional culture,
theatre, etc.
Science – Science and technology
Varied – Usually talk-based material,
such as quiz shows or interviews.
Pop M – Pop music
Rock M – Rock music
Probably the best feature of RDS is that you
can search automatically by type of program.
So, if you felt like listening to jazz, you could
search for a station that’s broadcasting a
show with the program type, Jazz. There are
around 30 such program types, including
various genres of music, news, sport, talk
shows, financial information, and so on.
Easy M – Easy listening music
Light M – ‘Light’ classical music
Classics – ‘Serious’ classical music
Other M – Other music not fitting any of
the above categories
Weather – Weather reports
Finance – Stock market reports,
commerce, trading, etc.
The receiver lets you display three different
kinds of RDS information: Radio Text,
Program Service Name, and Program Type.
Children – Programs for children
Social – Social affairs
Radio Text (RT) is messages sent by the radio
station. These can be anything the
broadcaster chooses—a talk radio station
might give out it telephone number as RT, for
example.
Religion – Programs concerning religion
Phone In – Public expressing their views
by phone
Travel – Holiday-type travel rather than
traffic announcements
Program Service Name (PS) is the name of
the radio station.
Leisure – Leisure interests and hobbies
Jazz – Jazz
Program Type (PTY) indicates the kind of
program currently being broadcast.
Country – Country music
The receiver can search for and display the
following program types:
Nation M – Popular music in a language
other than English
News – News
Oldies – Popular music from the ’50s and
’60s
Affairs – Current affairs
Info – General information
50
En
Download from Www.Somanuals.com. All Manuals Search And Download.
More tuner features: RDS
07
Folk M – Folk music
• In the PTY display, there are cases where
No Data or None is shown. If this
happens, the PS display is shown after a
few seconds.
Document – Documentaries
In addition, there are three other program
types, TEST, Alarm!, and None. Alarm! and
TEST are used for emergency
announcements. You can’t search for these,
but the tuner will switch automatically to this
RDS broadcast signal. None appears when a
program type cannot be found.
Searching for RDS programs
One of the most useful features of RDS is the
ability to search for a particular kind of radio
program. You can search for any of the
program types listed on the previous page.
Displaying RDS information
Use the DISPLAY button to display the
different types of RDS information available
(RT, PS and PTY).
1
Press the TUNER button to select the
FM band.
RDS is only possible in the FM band.
2
Press DISPLAY repeatedly until PTY
•
Press DISPLAY to select the RDS
SEARCH appears in the display.
information display.
Each press changes the display as follows:
3
Use ꢂ/ꢃ (cursor left/right) to select
the program type you want to hear.
• RT – Radio Text display
4
Press ENTER to search for the program
• PS – Program Service display
• PTY – Program Type display
type.
The system starts searching through the
station presets for a match. When it finds one,
the search stops and the station plays for five
seconds.
• PTY SEARCH – see Searching for RDS
programs below
• Current tuner frequency
5
If you want to keep listening to the
station, press ENTER within the 5 seconds.
If you don’t press ENTER, searching resumes.
• If any noise is picked up while displaying
the RT scroll, some characters may be
displayed incorrectly.
• If you see No Data in the RT display, it
means no RT data is transmitted from the
broadcast station. If you have entered a
name for the station, it is broadcast
instead of RT data. If you haven’t, the
display will automatically switch to the PS
data display. If no PS data is transmitted
from the station, the frequency will be
displayed.
51
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Using the timer
Chapter 8
Using the timer
1
Select the source you want played.
Setting the wake-up timer
For example, press TUNER (FM/AM on the
front panel) to select the radio as your source.
Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
2
Prepare the source.
For example, tune in the radio station you
want to wake up to.
If you’ve selected a CD, make sure that it’s
stopped.
• The clock must be set to the correct time
for the wake-up timer to work properly
(see Setting the clock on page 18).
3
Set the volume.
4
Press TIMER/CLOCK twice to reach the
STANDBY/ON
timer menu.
CD
FM/AM
TUNER
L1/L2
LINE
5
Use the ꢂ/ꢃ (cursor left/right)
DVD
TV
buttons to select ‘Wake-Up?’ then press
ENTER.
DISPLAY
OPEN CLOSE
0
8
1
3
7
¡
6
Use the ꢂ/ꢃ (cursor left/right)
4
4
buttons to select ‘TimerEdit’ then press
ENTER.
DVD MENU
RETURN
TUNE+
7
Set the switch-on time.
ST–
ST+
ENTER
Use the ꢀ/ꢁ (cursor up/down) buttons to set
the hour, then press ENTER. Set the minute in
the same way, pressing ENTER when you’re
done.
TUNE–
MUTE
SOUND
MASTER
VOLUME
TV CONTROL
8
Set the switch-off time.
CH
INPUT
VOL
Use the ꢀ/ꢁ (cursor up/down) buttons to set
the hour, then press ENTER. Set the minute in
the same way, pressing ENTER when you’re
done.
BASS MODE DIALOGUE
VIRTUAL SB
AUTO
SURROUND ADVANCED
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
After pressing ENTER this last time, the wake-
up indicator lights, and the switch-on, switch-
off times, the function (DVD/CD, etc.) and
volume are confirmed in the display.
HOME
MENU
ZOOM
1
TOP MENU
2
3
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
4
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
FOLDER–
0
FOLDER+
ENTER
CLR
9
Switch the system into standby mode.
ROOM SETUP
MAIN
SUB
The wake-up timer will not work if the system
is left on!
52
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the timer
08
Setting the sleep timer
The sleep timer switches off the system after
a specified time so you can fall asleep without
worrying about it.
• You can check the timer settings in
standby by pressing TIMER/CLOCK twice.
(Press TIMER/CLOCK once to display the
current time.)
• If you set the sleep timer while either the
wake-up timer is active, the earlier switch
off time takes priority.
Turning the wake-up timer on/off
If the wake-up timer is on, it will switch on the
system everyday at the time you have set.
1
Press TIMER/CLOCK twice to reach the
STANDBY/ON
timer menu.
CD
FM/AM
TUNER
L1/L2
LINE
DVD
TV
2
Use the ꢂ/ꢃ (cursor left/right)
DISPLAY
OPEN CLOSE
buttons to select ‘Wake-Up?’ then press
ENTER.
0
8
1
3
7
¡
3
Use the ꢂ/ꢃ (cursor left/right)
4
4
buttons to select ‘Timer On?’ or ‘Timer
Off?’.
DVD MENU
RETURN
• You must have the timer set (see above) to
select ON. The wake-up timer switches on
and off according to your previous
settings.
ENTER
MUTE
SOUND
MASTER
VOLUME
4
Press ENTER.
TV CONTROL
CH
INPUT
VOL
BASS MODE DIALOGUE
VIRTUAL SB
AUTO
SURROUND ADVANCED
• The wake-up timer will automatically be
canceled if the clock is reset.
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
3
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
4
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
FOLDER–
0
FOLDER+
ENTER
CLR
ROOM SETUP
MAIN
SUB
53
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Using the timer
1
Press TIMER/CLOCK twice to reach the
timer menu.
2
Use the ꢂ/ꢃ (cursor left/right)
buttons to select ‘Sleep?’ then press
ENTER.
3
Use the ꢀ/ꢁ (cursor up/down)
buttons to select a switch-off time then
press ENTER.
Choose between the following options:
• Sleep Auto – System switches off
automatically after the currently playing
CD, VCD or WMA/MP3 disc has finished.
• Sleep 90 – System switches off after 90
minutes
• Sleep 60 – System switches off after an
hour
• Sleep 30 – System switches off after 30
minutes
• Sleep Off – cancels the sleep timer
4
To check how much time is left, repeat
steps 1 and 2.
The remaining time is displayed momentarily.
• Sleep Auto will not work with VCDs
during PBC playback or CDs in repeat
play.
54
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Surround sound setup
09
CShuaprterr o9 und sound setup
1
Press SYSTEM SETUP.
Setting up surround sound
The Room Setup feature (page 19) is
designed to give you a basic surround sound
setup, however you can make the more
detailed settings that may improve the
surround sound in your listening room.
2
Use the ꢂ/ꢃ (cursor left/right)
buttons to choose the setting you want to
adjust.
The current setting is shown for each option
as you cycle through the display. See below
for a full list and description of each.
STANDBY/ON
3
Use the ꢀ/ꢁ (cursor up/down)
CD
FM/AM
TUNER
L1/L2
LINE
buttons to adjust the setting.
DVD
TV
DISPLAY
OPEN CLOSE
4
Repeat steps 2 and 3 to make other
0
8
settings.
1
3
7
¡
5
When you’re done, press ENTER to
4
4
leave the System Setup menu.
DVD MENU
RETURN
ENTER
MUTE
SOUND
• The System Setup menu is exited
automatically after 5 minutes of inactivity.
MASTER
VOLUME
TV CONTROL
System Setup menu options
Below are all the available settings in the
setup menu. The first setting in each section
is the default. See also the notes in each
section for additional information about the
settings.
CH
INPUT
VOL
BASS MODE DIALOGUE
VIRTUAL SB
AUTO
SURROUND ADVANCED
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
3
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
4
Front speakers distance setting
Specifies the distance from your listening
position to the front speakers:
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
FOLDER–
0
FOLDER+
ENTER
CLR
ROOM SETUP
MAIN
SUB
• Front 0.3 m ~ Front 9 m – Distance can
be set in increments of 0.3 m. The default
is 3 m.
Center speaker distance setting
Specifies the distance from your listening
position to the center speaker:
55
En
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Surround sound setup
• Center 0.3 m ~ Center 9 m – Distance
can be set in increments of 0.3 m. The
default is 3 m.
• On the Ch1 Mono and Ch2 Mono
settings the sound comes only from the
center speaker (or from the front speakers
if listening in STEREO mode).
Surround speakers distance setting
Specifies the distance from your listening
position to the front speakers:
• This setting works only with dual mono
encoded Dolby Digital or DTS
soundtracks. See the disc packaging for
channel information.
• Surr. 0.3 m ~ Surr. 9 m – Distance can
be set in increments of 0.3 m. The default
is 3 m.
LFE attenuator setting
Dynamic Range Control
Specifies the amount of dynamic range
adjustment to Dolby Digital or DTS
soundtracks:
Dolby Digital and DTS audio sources include
ultra-low bass tones. Set the LFE attenuator
as needed to prevent the ultra-low bass from
distorting the sound.
• DRC Off – No dynamic range adjustment
(use when listening at higher volume)
• LFE ATT 0 – The LFE channel is played
with no attenuation
• DRC Mid – Mid setting
• LFE ATT 10 – LFE channel is attenuated
by 10dB
• DRC High – Dynamic range is reduced
(loud sounds are reduced in volume while
quieter sounds are increased)
• LFE OFF – LFE channel is not played
• This setting works only with Dolby Digital
and some DTS soundtracks. For other
sources you can create a similar effect
using the Midnight mode (see Using
Quiet and Midnight listening modes on
page 33).
Dual mono setting
Specifies how dual mono encoded Dolby
Digital or DTS soundtracks should be played.
You can also use this setting to switch the
audio channel on DVD-RW discs recorded
with two separate soundtracks.
• L-Ch1 R-Ch2 – Both channels are played
through the front speakers
• Ch1 Mono – Only channel 1 is played
• Ch2 Mono – Only channel 2 is played
56
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Surround sound setup
09
2
Switch the remote control to SUB,
Setting the channel levels
then press TEST TONE to hear the test
tone.
The test tone is output in the following order
(from the speakers active in the current
listening mode):
You can set the relative channel levels from
your main listening position for each listening
mode, including all the Surround and
Advanced Surround modes.
If you used the Room Setup feature (page 19),
the channel levels for each listening mode
will already be set. However, you can still fine-
tune the levels here if you need to.
• L – Front left speaker
• C – Center speaker
• R – Front right speaker
• RS – Right surround speaker
• LS – Left surround speaker
• SW – Subwoofer
STANDBY/ON
CD
FM/AM
TUNER
L1/L2
LINE
DVD
TV
DISPLAY
OPEN CLOSE
0
8
3
Use the MASTER VOLUME +/– button
to adjust the volume to an appropriate
level.
1
3
7
¡
4
4
4
Use the ꢀ/ꢁ (cursor up/down)
DVD MENU
RETURN
SOUND
buttons to adjust the speaker levels in
turn.
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level
range is 10 dB.
ENTER
MUTE
MASTER
VOLUME
TV CONTROL
5
When you’re done, press ENTER to exit
CH
INPUT
VOL
test tone setup.
BASS MODE I
AUTO
SURROUND ADVANCED
PROGRAM
AUDIO
REPEAT
RANDOM
ANGLE
SUBTITLE
HOME
MENU
ZOOM
1
TOP MENU
2
• The speaker volume can be adjusted
while listening to any sound source you
want by pressing CH LEVEL and then
using the ꢀ/ꢁ (cursor up/down) buttons
to adjust the channel levels. After you’re
finished with one channel, use the ꢂ/ꢃ
(cursor left/right) buttons to move to the
next.
3
SYSTEM
TEST TONE
5
CH LEVEL
6
SETUP
4
QUIET/
TIMER/
DIMMER
7
MIDNIGHT
CLOCK
8
9
FOLDER–
0
FOLDER+
ENTER
CLR
ROOM SETUP
MAIN
SUB
1
Press SURROUND or ADVANCED
repeatedly to select a listening mode.
• Since the subwoofer produces ultra-low
frequencies its sound may seem quieter
than it actually is.
57
En
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Video Adjust menu
Chapter 10
Video Adjust menu
Creating your own presets
You can create up to three presets of your
own.
Video Adjust
• Default setting: Standard
From the Video Adjust screen you can select
the standard video presentation or define
presets of your own.
1
Select one of the Memory presets (see
above).
1
Press HOME MENU and select ‘Video
2
Press ꢁ (cursor down) to select
Adjust’ from the on-screen display.
‘Detailed Settings’ then press ENTER.
Video Adjust
HOME MENU
DVD
Memory1
Detailed Settings
Play Mode
Video Adjust
Disc Navigator
Initial Settings
3
Adjust the picture quality settings.
Memory1
Recall Settings
Contrast
Memory1
min
min
min
max
max
max
2
Use the ꢂ/ꢃ (cursor left/right)
Brightness
buttons to select a preset.
Chroma Level
Video Adjust
Standard
• Use the ꢀ/ꢁ(cursor up/down) buttons to
select a setting.
• Standard – Normal
• Use the ꢂ/ꢃ (cursor left/right) buttons
to adjust the current setting.
• Memory1–2 – Use for saving your own
presets (see below)
• Press DISPLAY to switch between full and
single view.
3
Press ENTER to make the setting and
exit the Video Adjust screen.
• You can change the preset number from
the Recall Settings menu item.
• Depending on the disc and the TV/
monitor, you may not see the effect
clearly.
58
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Adjust menu
10
You can adjust any or all of the following
picture quality settings:
• Contrast – Adjusts the contrast between
light and dark.
• Brightness – Adjusts the overall bright-
ness.
• Chroma Level – Adjusts how saturated
colors appear.
4
Press ENTER to save the preset and
exit the Video Adjust screen.
59
En
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Initial Settings menu
Chapter 11
Initial Settings menu
Using the Initial Settings
menu
Video Output settings
The Initial Settings menu gives you complete
control in setting up your DVD system,
including video output settings and parental
lock settings, among others.
TV Screen
• Default setting: 4:3 (Letter Box)
Initial Settings
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
Video Output
Language
Display
4:3 (Letter Box)
4:3 (Pan&Scan)
16:9 (Wide)
TV Screen
AV Connector Out
Options
1
Press HOME MENU and select ‘Initial
Settings’ from the on-screen display.
Illustration shows the European model
If you have a widescreen TV, select the 16:9
(Wide) setting—widescreen DVD software is
then shown using the full screen area. When
playing software recorded in conventional
(4:3) format, the settings on your TV will
determine how the material is presented—
see the manual that came with your TV for
details on what options are available.
HOME MENU
DVD
Play Mode
Video Adjust
Disc Navigator
Initial Settings
If you have a conventional TV, select either 4:3
(Letter Box) or 4:3 (Pan & Scan). In Letter
Box mode, widescreen software is shown with
black bars at the top and bottom of the
screen. Pan & Scan chops the sides off
widescreen material to make it fit the 4:3
screen (so even though the image looks
larger on the screen, you’re actually seeing
less of the picture). See also Screen sizes and
disc formats on page 82.
2
Select the setup category from the list
on the left, then select an item from the
menu list to the right.
3
Make the setting you want.
• The language options shown in the on-
screen display illustrations on the
following pages may not correspond to
those available in your country or region.
AV Connector Out
European model only
You only need to make this setting if you
connected this player to your TV using the AV
SCART-type connector.
60
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings menu
11
• Default setting: Video
If you have a progressive-scan compatible TV,
set this to Progressive for flicker-free video
output. If your TV is not compatible with
progressive-scan video, set to Interlace.
Check the operating instructions that came
with your TV if you’re unsure about its
compatibility.
• If you make a setting here that is incom-
patible with your TV, the TV may not
display any picture at all. If this happens
switch everything off and reconnect to the
TV using the supplied audio/video cable.
When setting to Progressive, you have to
press ENTER once more to confirm (or
RETURN to cancel). See also below for
important information on progressive scan
video.
• SCART cables come in various configura-
tions. Make sure you use the correct one
for your TV/monitor. See page 72 for the
SCART pin assignment diagram.
About progressive scan video
Compared to interlace video, progressive
scan video effectively doubles the scanning
rate of the picture, resulting in a very stable,
flicker-free image. Progressive scan video is
available only from the component video
output.
Initial Settings
Video Output
Language
Display
Video
S-Video
RGB
TV Screen
AV Connector Out
Options
• Video – Standard video, compatible with
all TVs.
• When TV format is set to AUTO or NTSC
only: When Component Out (above) is set
to Progressive, there is no video output
from the VIDEO and S-VIDEO jacks. If you
want to display video on more than one
monitor simultaneously, make sure that it
is set to Interlace. See also Setting the TV
format on page 73.
• S-Video – Higher quality, but check your
TV for compatibility.
• RGB – Best quality, but check your TV for
compatibility.
Component Out
Not Applicable to the European model
• If you connect a TV that is not compatible
with a progressive scan signal and switch
the system to progressive, you will not be
able to see any picture at all. In this case,
press ꢃ STANDBY/ON to put the system
in standby, then press and hold the front
panel ꢂ(stop) button for about 8 seconds
until the display shows Mem.Clr.?. Press
the front panel VOLUME – (DOWN) or +
(UP) button so that the display shows
Interlace?. Press the front panel ꢁ
button to set to interlace and switch the
system back on.
You only need to make this setting if you
connected this system to your TV using the
component video outputs.
• Default setting: Interlace
Initial Settings
Digital Audio Out
Video Output
Language
Interlace
TV Screen
Progressive
Auto Progressive
Component Out
S-Video Out
Display
Options
61
En
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Initial Settings menu
• When TV format is set to AUTO or NTSC
only: When set to Progressive, PAL and
NTSC discs are both output as progres-
sive NTSC video. See page 73.
S-Video Out
Not Applicable to the European model
You only need to make this setting if you
connected this system to your TV using an
S-video cable.
• When TV format is set to PAL only:
Progressive cannot be selected. See
page 73.
• Default setting: S2
Initial Settings
Compatibility of this system with
progressive-scan TVs.
This system is compatible with progressive
Digital Audio Out
Video Output
Language
TV Screen
S1
S2
AV Connector Out
S-Video Out
Display
video Macro Vision System Copy Guard.
Options
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE
“STANDARD DEFINITION” OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
This system is compatible with the following
• If you find that the picture is stretched or
distorted on the default S2 setting, try
changing it to S1.
Language settings
Audio Language
• Default setting: English
Pioneer displays and monitors: PDP-503HDG,
PDP-433HDG progressive scan-compatible
TVs.
Initial Settings
Video Output
Language
Display
Audio Language
Subtitle Language
DVD Menu Lang.
Subtitle Display
English
French
German
Options
Italian
Spanish
Other Language
This setting is your preferred audio language
for DVD discs. If the language you specify
here is recorded on a disc, the system
automatically plays the disc in that language.
The DVD format recognizes 136 different
languages. Select Other Language if you
want to specify a language other than those
listed. See also Selecting languages using the
language code list on page 82.
62
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings menu
11
• You can switch between the languages
recorded on a DVD disc during playback
using the AUDIO button. (This does not
affect this setting.) See Switching the DVD
audio language on page 44.
• You can usually change or switch off the
subtitles on a DVD disc during playback
using the SUBTITLE button. (This does not
affect this setting.) See Switching
subtitles on page 44.
• Some DVD discs set the audio language
automatically when loaded, overriding the
Audio Language setting.
• Some DVD discs set the subtitle language
automatically when loaded, overriding the
Subtitle Language setting.
• Discs with two or more audio languages
usually allow you to select the audio
language from the disc menu. Press DVD
MENU to access the disc menu.
• Discs with two or more subtitle
languages usually allow you to select the
subtitle language from the disc menu.
Press DVD MENU to access the disc
menu.
Subtitle Language
DVD Menu Language
• Default setting: w/Subtitle Lang.
• Default setting: English
Initial Settings
Initial Settings
Video Output
Language
Display
Audio Language
Subtitle Language
DVD Menu Lang.
Subtitle Display
English
French
Video Output
Language
Display
Audio Language
Subtitle Language
DVD Menu Lang.
Subtitle Display
w/Subtitle Lang.
English
German
Options
Italian
French
Spanish
Other Language
Options
German
Italian
Spanish
Other Language
This setting is your preferred subtitle
language for DVD discs. If the language you
specify here is recorded on a disc, the system
automatically plays the disc with those
subtitles.
Some multilingual discs have disc menus in
several languages. This setting specifies in
which language the disc menus should
appear. Leave on the default setting for
menus to appear in the same language as
your Subtitle Language —see above.
The DVD format recognizes 136 different
languages. Select Other Language if you
want to specify a language other than those
listed. See also Selecting languages using the
language code list on page 82.
The DVD format recognizes 136 different
languages. Select Other Language if you
want to specify a language other than those
listed. See also Selecting languages using the
language code list on page 82.
63
En
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Initial Settings menu
This sets whether operation displays are
shown on-screen (Play, Resume, Scan and so
on).
Subtitle Display
• Default setting: On
Initial Settings
Angle Indicator
• Default setting: On
Video Output
Language
Display
Audio Language
Subtitle Language
DVD Menu Lang.
Subtitle Display
On
Off
Options
Initial Settings
Video Output
Language
Display
OSD Language
On Screen Display
Angle Indicator
On
Off
When set to On, the player displays subtitles
according to the Subtitle Language setting.
Set to Off to switch subtitles off altogether.
Options
If you prefer not to see the camera icon on-
screen during multi-angle scenes on DVD
discs, change this setting to Off.
Display settings
OSD Language
• Default setting: English
Options
Initial Settings
Parental Lock
Video Output
Language
Display
OSD Language
On Screen Display
Angle Indicator
English
français
Deutsch
Italiano
Español
• Default level: Off
Options
• Default password: none
• Default Country code: us (2119)
Some DVD-Video discs feature a Parental
Lock level. If the player is set to a lower level
than the disc, the disc won’t play. This gives
you some control about what your children
watch on your DVD system.
This sets the language of this system’s on-
screen displays.
On Screen Display
• Default setting: On
Some discs also support the Country code
feature. The player does not play certain
scenes on these discs, depending on the
Country code you set.
Initial Settings
Video Output
Language
Display
OSD Language
On Screen Display
Angle Indicator
On
Off
Before you can set the Parental Lock level or
the Country code you must register a
password. As the password owner, you can
change the Parental Lock level or Country
code whenever you like. You can also change
the password.
Options
64
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings menu
11
3
Press ENTER to register the password
and return to the Options menu screen.
If you forget your password, you can reset the
system then register a new one. See Resetting
the system on page 74 for how to reset the
system.
• Not all discs that you may consider
inappropriate for your children use the
Parental Lock feature. These discs will
always play without requiring the
password first.
• If you forget your password, you’ll need to
reset the system to its factory settings
(see Resetting the system on page 74),
then register a new password.
Changing your password
To change your password, confirm your
existing password then enter a new one.
1
Select ‘Password Change’.
Registering a new password
You must register a password before you can
change the Parental Lock level or enter a
Country code.
Initial Settings
Video Output
Language
Display
Parental Lock
PhotoViewer
Password Change
Level Change
Country Code
1
Select ‘Password’.
Options
Initial Settings
Video Output
Language
Display
Parental Lock
PhotoViewer
Password
Level Change
Country Code
2
Use the number buttons to enter your
existing password, then press ENTER.
The numbers appear as asterisks as you enter
them.
Options
Initial Settings
2
Use the number buttons to enter a 4-
Parental Lock: Password Change
Video Output
digit password.
Language
Password
*
*
*
*
Display
Options
Initial Settings
New Password
Video Output
Language
Display
Parental Lock: Register Code Number
*
*
*
*
Options
3
Enter a new password.
Initial Settings
Parental Lock: Password Change
Password
The numbers you enter show up as asterisks
(*) on-screen.
Video Output
Language
Display
*
*
*
*
*
*
*
*
Options
New Password
65
En
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Initial Settings menu
4
Press ENTER to register the new
Setting/changing the Country code
You may also want to refer to the Country code
list on page 83.
password and return to the Options menu
screen.
1
Select ‘Country Code’.
Setting/changing the Parental Lock level
Initial Settings
1
Select ‘Level Change’.
Video Output
Language
Display
Parental Lock
PhotoViewer
Password Change
Level Change
Country Code
Initial Settings
Options
Video Output
Language
Display
Parental Lock
PhotoViewer
Password Change
Level Change
Country Code
Options
2
Use number buttons to enter your
password, then press ENTER.
Initial Settings
2
Use number buttons to enter your
Parental Lock: Country Code
Video Output
password, then press ENTER.
Language
Display
Password
*
*
*
*
Initial Settings
Options
Country Code List
us
Code
Parental Lock : Level Change
Video Output
2
1
1
9
Language
Display
Password
*
*
*
*
Options
3
Select a Country code.
1
2
3
4
5
6
7
8
off
There are two ways you can do this.
• Select by code letter: Use ꢀ/ꢁ (cursor
up/down) to change the Country code.
3
Select a new level.
Initial Settings
Initial Settings
Parental Lock : Level Change
Parental Lock: Country Code
Video Output
Video Output
Language
Display
Password
*
*
*
*
Language
Display
Password
*
*
*
*
Options
Options
Country Code List
us
Code
2
1
1
9
1
2
3
4
5
6
7
8
off
Press ꢂ (cursor left) repeatedly to lock more
levels (more discs will require the password);
press ꢃ (cursor right) to unlock levels. You
can’t lock level 1.
4
Press ENTER to set the new level and
return to the Options menu screen.
66
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Settings menu
11
• Select by code number: Press ꢃ(cursor
right) then use the number buttons to
enter the 4-digit Country code (you can
find the Country code list on page 83.)
• Changing the PhotoViewer setting does
not take effect until the next disc is loaded
(or the current disc is reloaded).
Initial Settings
Parental Lock: Country Code
Video Output
Language
Display
Password
*
*
*
*
Options
Country Code List
us
Code
2
1
1
9
4
Press ENTER to set the new Country
code and return to the Options menu
screen.
• Changing the Country code does not take
effect until the next disc is loaded (or the
current disc is reloaded).
PhotoViewer
•
Default setting: On
Initial Settings
Video Output
Language
Display
Parental Lock
PhotoViewer
On
Off
Options
This setting is important if you load a disc that
contains both WMA/MP3 audio files and
JPEG picture files.
The default On setting allows you to view only
the JPEG files on this kind of disc. Set to Off
to be able to play the WMA/MP3 audio files.
67
En
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Other connections
Chapter 12
Other connections
All other models
Connecting external antennas
External AM antenna
Use 5–6 meters of vinyl-insulated wire and set
up either indoors or outdoors. Leave the AM
loop antenna connected.
75Ω coaxial cable
Outdoor antenna
Indoor
antenna
AM
LOOP ANTENNA
FM
UNBAL 75Ω
ANTENNA
(vinyl-coated
wire)
5–6m
AM
Connecting auxiliary
components
LOOP ANTENNA
This system has both stereo analog inputs
and outputs, as well as a optical digital input.
Use these to connect external components,
such as your VCR, MD or CD-R recorder.
External FM antenna
Use a PAL connector (European model) or a
75Ω coaxial cable (all other models) to hook
up an external FM antenna.
European model
AUDIO
OUTPUT
TV
PAL connector
ANTENNA
IN
IN
OUT
CENTER
6
FR6ONT
PEAKERS
L
TV AUDIO LINE
1
R
R
6
6
6
SUB
WOOFER
XV–DV313
68
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Other connections
12
•
Connect the TV (IN) jacks to the audio
•
Connect the LINE 2 (OPTICAL IN) jack
outs of your TV (or VCR).
on the rear panel to the optical digital
output of an external playback
component.
This will enable you to hear the TV (or VCR)
through this system. Connect using RCA pin-
plug stereo cables. See also Reducing the TV
and line signal levels below.
OPTICAL IN
Tape deck, etc.
LINE 2
AUDIO
OUTPUT
AUDIO
INPUT
These include digital components such as an
MD player, digital satellite, or a game system.
Connect using a optical digital cable (not
supplied).
Reducing the TV and line signal
levels
• Default setting: ATT 6dB
IN
IN
OUT
Some sources may produce a high signal
level which may produce unpleasant
distortion from the speakers. In such cases,
you may need to reduce the signal level of the
auxiliary source (connected to the TV or LINE
1 analog inputs) by switching on the
attenuator.
CENTER
SURR
FR6ONT
6
6
EAKERS
L
L
TV
AUDIO
LINE
1
R
R
6
6
6
SUB
WOOFER
XV-DV313
•
Connect the LINE 1 (IN) jacks to the
1
2
3
Switch the system into standby.
Press SYSTEM SETUP.
analog outputs of an external playback
component.
These include components such as a VCR or
cassette deck. Connect using RCA pin-plug
stereo cables. See also Reducing the TV and
line signal levels below.
Use the ꢂ/ꢃ (cursor left/right)
buttons to select ‘TV ATT?’ or ‘LINE1
ATT?’, then press ENTER.
•
Connect the LINE 1 (OUT) jacks to the
4
Use the ꢀ/ꢁ (cursor up/down)
analog inputs of an external recording
component.
buttons to select ‘ATT Off’, ‘ATT 6dB’ or
‘ATT 10dB’.
These include components such as a
cassette deck, VCR, MD or another recorder
with analog inputs. Connect using RCA pin-
plug stereo cables.
If the ATT 6dB setting still results in distorted
sound, try the ATT 10dB setting.
5
Press ENTER to confirm.
69
En
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Other connections
•
Use an S-video cable (not supplied) to
Recording mode
connect the S-VIDEO OUT to an S-video
input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging
in.
The Recording mode allows you to make
analog recordings from the LINE 1 (OUT)
jacks.
When Recording mode is on, most sound-
related functions (including SURROUND,
ADVANCED, AUTO, SYSTEM SETUP)
become inactive. The display will briefly blink
RecMode On if you try and use a prohibited
function while Recording mode is on.
S-VIDEO
INPUT
When Recording mode is off, the audio from
the analog output may be interrupted,
depending on the operation.
1
Press SOUND.
TV
2
Use the ꢂ/ꢃ (cursor left/right)
buttons to select ‘Rec Mode?’.
3
Press ENTER.
OPTICAL IN
AUDIO
4
Use the ꢀ/ꢁ (cursor up/down)
buttons to select ‘R.Mode On’ or ‘R.Mode
Off’.
LINE 2
AM
FM
ANTENNA
LOOP ANTENNA
UNBAL 75Ω
S-VIDEO VIDEO
OUT OUT
Y
PB
PR
VIDEO
COMPONENT VIDEO OUT
Connecting using the S-video
XV–DV313
output
Not applicable to the European model
If your TV has an S-video input, you can use
this instead of the standard video output for a
better quality picture.
• The S-video ouptut is switchable between
S1 and S2 formats for compatibility with
all TVs. See S-Video Out on page 62 for
more on this.
Connecting using the
component video output
Not applicable to the European model
If your TV has component video inputs, you
can use these instead of the standard video
output to connect this system to your TV. This
should give you the best quality picture from
the three types of video output available.
70
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Other connections
12
•
Use a component video cable (not
•
Use a commercially available SCART
supplied) to connect the COMPONENT
VIDEO OUT to a set of component inputs
on your TV.
cable to connect the AV CONNECTOR to
your TV.
TV
COMPONENT
INPUT
OPTICAL IN
AUDIO
IN
IN
OUT
L
FRONT
6
CENTER
6
SURROUND
6
LINE
2
ANTENNA
AV CONNECTOR
L
R
TV AUDIO LINE
1
TV
R
AC IN
6
6
6
VIDEO
OUT
VIDEO
SUB
WOOFER
XV-DV313
M
ANTENNA
ANTENNA
NBAL
• SCART cables are available in several
configurations. Make sure that the one
you get will work with this system and
your TV/monitor. You can find the pin
assignments below.
Y
PB
PR
COMPONENT VIDEO OUT
XV–DV313
Switching the TV audio input from
SCART to RCA
You can set the TV audio input to RCA or
SCART.
• The component video ouptut is
switchable between interlaced and
progressive formats. See Component Out
on page 61 for more on this.
1
2
3
Press TV.
Press SYSTEM SETUP.
Use the ꢂ/ꢃ (cursor left/right)
Using the SCART AV output
buttons to select ‘TV Audio?’.
European model only
4
Press ENTER.
There are two different kinds of video outputs
you can use to connect this system to your TV.
The SCART output should give you better
picture quality than the standard composite
video output. The SCART AV connector
functions as both a video and audio output.
5
Use the ꢀ/ꢁ (cursor up/down)
buttons to select SCART or RCA.
6
Press ENTER
71
En
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Other connections
SCART pin assignment
The diagram below shows the SCART 21-pin
connector assignment. This connector
provides the video and audio signals for
connection to a compatible colour TV or
monitor.
Pin
No.
Pin
No.
Assignment
Assignment
1
Audio R OUT 12
No
connection
2
3
4
5
6
7
8
Audio R IN 13
GND (video)
GND (video)
R or C OUT
BLANK OUT
GND (video)
GND (video)
Audio L OUT 14
GND (audio) 15
GND (video) 16
Audio L IN
B OUT
17
18
19
Status
Video or Y
OUT
9
GND (video) 20
No
connection
10
11
No
connection
21
GND (video)
G OUT
72
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
13
Chapter 13
Additional information
4
Use the ꢀ/ꢁ (cursor up/down)
Switching off the demo
buttons to select ‘Lock On?’ or ‘Lock Off?’.
• Default setting: Demo On
5
Press ENTER to confirm.
This system has an automatic demo feature
that starts when the system is plugged in for
the first time.
Changing the clock format
1
2
3
Switch the system into standby.
Press SYSTEM SETUP.
• Default setting: 12-Hour
You can choose to display the clock in either
12 or 24 hour formats.
Use the ꢂ/ꢃ (cursor left/right)
1
2
3
Switch the system into standby.
Press SYSTEM SETUP.
buttons to select ‘Demo Mode?’, then
press ENTER.
4
Use the ꢀ/ꢁ (cursor up/down)
Use the ꢂ/ꢃ (cursor left/right)
buttons to select ‘Demo Off?’ then press
ENTER to confirm.
buttons to select ‘12/24 Hour?’, then press
ENTER.
4
Use the ꢀ/ꢁ (cursor up/down)
buttons to select either ‘12-Hour?’ or ‘24-
Hour?’.
• After setting the clock, the demo mode
switches off automatically. However, if
you unplug the system from the wall
outlet, the demo mode will revert to Demo
On (and the clock will be reset).
5
Press ENTER to confirm.
Setting the TV format
• Default setting: AUTO
The default setting of this system is AUTO,
and unless you notice that the picture is
distorted when playing some discs, you
should leave it set to AUTO. If you experience
picture distortion with some discs, set the TV
system to match your country or region’s
system. Doing this, however, may restrict the
kinds of disc you can watch. The table below
shows what kinds of disc are compatible with
each setting (AUTO, PAL and NTSC).
Child Lock
• Default setting: Lock Off
This system has a child lock feature that
makes the front panel buttons and controls
inoperative. This is useful when you’ve set the
wake-up timer and don’t want the system
switched on before it activates.
1
2
3
Switch the system into standby.
Press SYSTEM SETUP.
Use the ꢂ/ꢃ (cursor left/right)
buttons to select ‘Child Lock?’, then press
ENTER.
73
En
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Additional information
1
2
3
Switch the system into standby.
Press SYSTEM SETUP.
Changing the frequency step
Not applicable to the European model
• Default setting: AM 9/FM 50
Use the ꢂ/ꢃ (cursor left/right)
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region.
buttons to select ‘TV System?’, then press
ENTER.
4
Use the ꢀ/ꢁ (cursor up/down)
1
2
3
Switch the system into standby.
Press SYSTEM SETUP.
buttons to select Auto, PAL or NTSC, then
press ENTER to confirm.
Use the ꢂ/ꢃ (cursor left/right)
Disc
Type
DVD
Player setting
Format NTSC PAL
NTSC NTSC
NTSC
Video CD NTSC NTSC
buttons to select ‘FM AM Step?’, then
press ENTER.
AUTO
4
Use the ꢀ/ꢁ (cursor up/down)
MOD.PAL NTSC
buttons to select ‘FM 50 AM 9?’ or ‘FM100
AM10?’ then press ENTER to confirm.
/Super VCD PAL
PAL
PAL
MOD.PAL NTSC
Resetting the system
PAL
—
NTSC
NTSC
PAL
PAL
PAL
Use this procedure to reset all system
settings to the factory default.
CD/no disc
NTSC or
PAL
1
Switch the system into standby.
2
Press and hold the front panel ꢂ(stop)
Watching NTSC on a PAL TV
(MOD. PAL)
button for about 8 seconds until the
display shows ‘Mem.Clr.?’.
Most models of the newly developed count-
down PAL TV system detect 50 Hz (PAL)/60 Hz
(NTSC) and automatically switch vertical
amplitude, resulting in a display without
vertical shrinkage. However, in some cases,
the image may appear without color.
3
Press the front panel ꢁ button.
All the system’s settings are now reset, and
you should see the ‘Let’s Get Started’ screen.
Using and taking care of discs
If your PAL TV does not have a V-Hold control,
you may not be able to watch NTSC discs
because of picture roll. If the TV has a V-Hold
control, adjust it until the picture stops
rolling.
Titles, chapters and tracks
DVD discs are generally divided into one or
more titles. Titles may be further subdivided
into chapters.
On some TVs, the picture may shrink verti-
cally, leaving black bands at the top and
bottom of the screen. This is not a malfunc-
tion; it is caused by the NTSC to PAL conver-
sion.
Title 1
Title 2
Title 3
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2
74
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
13
CDs and Video CD/Super VCDs are divided
into tracks.
Damaged or dirty discs can affect playback
performance. Take care also not to scratch
the label side of the disc. Although not as
fragile as the recorded side, scratches can
still result in a disc becoming unusable.
Should a disc become marked with
fingerprints, dust, etc., clean using a soft, dry
cloth, wiping the disc lightly from the center
to the outside edge as shown in the diagram
below.
Track 1 Track 2 Track 3 Track 4 Track 5 Track 6
CD-ROMs contain folders and files. MP3 and
WMA files are referred to as tracks. Folders
may contain further folders.
Folder A
Track 1
Folder B Folder C
Track 2
Track 3
Track 1
File 1
File 2
Wipe lightly from the center of the disc using
straight strokes.
DVD Video regions
All DVD Video discs carry a region mark on
the case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD system also has a region
mark, which you can find on the rear panel.
Discs from incompatible regions will not play
in this player. Discs marked ALL will play in
any player.
Don’t wipe the disc surface using circular
strokes.
If necessary, use a cloth soaked in alcohol, or
a commercially available CD/DVD cleaning kit
to clean a disc more thoroughly. Never use
benzine, thinner or other cleaning agents,
including products designed for cleaning
vinyl records.
The diagram below shows the various DVD
regions of the world.
Storing discs
Although CDs and DVD discs are more
durable than vinyl records, you should still
take care to handle and store discs correctly.
When you're not using a disc, return it to its
case and store upright. Avoid leaving discs in
excessively cold, humid, or hot environments
(including under direct sunlight).
Handling discs
When holding discs of any type, take care not
to leave fingerprints, dirt or scratches on the
disc surface. Hold the disc by its edge or by
the center hole and edge.
75
En
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Additional information
Don't glue paper or put stickers onto the disc,
or use a pencil, ball-point pen or other sharp-
tipped writing instrument. These could all
damage the disc.
ꢄPlace on a solid, flat, level surface, such
as a table, shelf or stereo rack.
Don’t...
ꢅ Use in a place exposed to high
temperatures or humidity, including near
radiators and other heat-generating
appliances.
ꢅ Place on a window sill or other place
where the system will be exposed to direct
sunlight.
For more detailed care information see the
instructions that come with discs.
Do not load more than one disc into the player
at a time.
ꢅ Use in an excessively dusty or damp
environment.
ꢅ Place directly on top of an amplifier, or
other component in your stereo system
that becomes hot in use.
Discs to avoid
Discs spin at high speed inside the player. If
you can see that a disc is cracked, chipped,
warped, or otherwise damaged, don't risk
using it in your player—you could end up
damaging the unit.
ꢅ Use near a television or monitor as you
may experience interference—especially
if the television uses an indoor antenna.
ꢅ Use in a kitchen or other room where the
system may be exposed to smoke or
steam.
ꢅ Use on a thick rug or carpet, or cover with
cloth—this may prevent proper cooling of
the system.
ꢅ Place on an unstable surface, or one that
is not large enough to support all four of
the unit’s feet.
This unit is designed for use with
conventional, fully circular discs only. Use of
shaped discs is not recommended for this
product. Pioneer disclaims all liability arising
in connection with the use of shaped discs.
Cleaning the pickup lens
The DVD player’s lens should not become
dirty in normal use, but if for some reason it
should malfunction due to dust or dirt,
consult your nearest Pioneer authorized
service center. Although lens cleaners are
commercially available, we do not
recommend using them since some may
damage the lens.
Proper installation and
maintenance of this system
Hints on installation
We want you to enjoy using this system for
years to come, so please bear in mind the
following points when choosing a suitable
location for it:
Do...
ꢄUse in a well-ventilated room.
76
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
13
Check the power cord once in a while. When
you find it damaged, ask your nearest Pioneer
authorized service center or your dealer for a
replacement.
Problems with condensation
Condensation may form inside the player if it
is brought into a warm room from outside, or
if the temperature of the room rises quickly.
Although the condensation won’t damage the
player, it may temporarily impair its
performance. For this reason you should
leave it to adjust to the warmer temperature
for about an hour before switching on and
using.
Moving the system unit
If you need to move the main unit, first remove
a disc if there’s one in the player, then press
ꢃ STANDBY/ON on the front panel to turn
the system off. Wait for Good Bye to
disappear from the display, then unplug the
power cable. Never lift or move the unit during
playback—discs rotate at a high speed and
may be damaged.
• Unplugging the unit before Good Bye
disappears from the display may cause
the system to return to the factory
settings.
Power cord caution
Handle the power cord by the plug. Do not
pull out the plug by tugging the cord and
never touch the power cord when your hands
are wet as this could cause a short circuit or
an electric shock. Do not place this unit, a
piece of furniture, etc., on the power cord, or
pinch the cord. Never make a knot in the cord
or tie it with other cords. The power cords
should be routed such that they are not likely
to be stepped on. A damaged power cord can
cause a fire or give you an electrical shock.
77
En
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Additional information
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie
in another component. Investigate the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest
Pioneer authorized service center or your dealer to carry out repair work.
• If the system does not operate normally due to external effects such as static electricity
disconnect the power plug from the outlet and insert again to return to normal operating
conditions.
General
Problem
Remedy
The power does not
turn on.
• Connect the power plug to the wall outlet.
• Disconnect the power plug from the outlet, and insert again.
• Make sure there are no loose strands of speaker wire touching the rear
panel. This could cause the system to shut off automatically.
No sound is output
when a function is
selected.
• If you’re using the line input, make sure the component is connected
correctly (see Connecting auxiliary components on page 68).
• Press MUTE on the remote control to turn muting off.
• Adjust the VOLUME.
• European model only: If you’re using the TV input, make sure you’ve
selected the RCA audio input (see Switching the TV audio input from SCART
to RCA on page 71).
No image is output
when playing discs.
• Make sure the TV is connected correctly (refer to the Setup Guide).
• Not applicable to the European model: Reset the video output to
interlace (see Component Out on page 61).
No sound from
surround or center
speakers.
• Refer to Setting the channel levels on page 57 to check the speaker levels.
• Check that you haven’t selected the STEREO sound mode (see Listening
in surround sound on page 29).
• Check that the Virtual mode is not on (Using the Advanced Surround
effects on page 31).
• Connect the speakers properly (refer to the Setup Guide).
Can’t operate the
remote control.
• Replace the batteries (refer to the Setup Guide).
• Operate within 7 m, 30° of the remote sensor on the front panel (refer to
the Setup Guide).
• Remove any obstacles or operate from another position.
• Avoid exposing the remote sensor on the front panel to direct light.
78
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
13
Problem
Remedy
Timer indicator is
blinking and the
• Unplug the unit, then plug back in. Wait for one minute then switch on.
• Make sure the fan at the rear of the unit is not being blocked.
system will not switch • Check that the speakers are connected correctly.
on. • Make sure the voltage of the mains power source is correct for the
model.
• If the problem persists, take it to your nearest Pioneer
authorized service center or your dealer for servicing.
DVD/CD/Video CD player
Problem
Remedy
The disc is ejected
automatically after
loading.
• Clean the disc.
• Align the disc properly in the disc guide.
• If the region number on a DVD-video disc does not match the number on
the player, the disc cannot be used (see DVD Video regions on page 75).
• Allow time for any condensation inside the player to evaporate. Avoid
using the player near an air-conditioning unit.
Playback is not
possible.
• If the disc is loaded upside down, reload the disc with the label side face
up.
Picture playback stops
and the operation
buttons cannot be
used.
• Press ꢀ (stop), then ꢁ (play) to start playback again.
• Switch the power off once, then on again using the front panel
ꢂ STANDBY/ON button.
Settings are canceled. • When the power is cut due to power failure or by unplugging the power
cable, settings will be canceled.
No picture/No color.
• Check that connections are correct and that plugs are inserted fully.
• Check the instruction manual of the TV/monitor to make sure the TV/
monitor settings are incorrect.
Screen is stretched or
aspect does not
change.
• The TV Screen setting is incorrect. Set the TV Screen option to match the
TV/monitor you're using (see TV Screen on page 60).
When recorded on a
• This system uses copy-protection technology which may prevent
VCR or passed through recording or cause picture problems when connected through a VCR or AV
an AV selector, there is selector. This is not a malfunction.
disturbance in the
playback picture.
CD won’t play
• Set the PhotoViewer menu option in the Initial Settings menu to Off to
be able to play some copy-protected CDs. See also PhotoViewer on page 67.
79
En
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Additional information
Problem
Remedy
Picture disturbance
during playback or
dark.
• This player is compatible with Macro-Vision System copy guard. Some
discs include a copy prevention signal, and when this type of disc is played
back, stripes etc., may appear on some sections of the picture depending
on the TV. This is not a malfunction.
• Discs respond differently to particular player functions. This may result in
the screen becoming black for a brief instant or shaking slightly when the
function is executed. These problems are largely due to differences
between discs and disc content and are not malfunctions of this player.
Noticeable difference
in DVD and CD
volume.
• DVDs and CDs use different recording methods. This is not a
malfunction.
WMA/MP3/JPEG discs
Problem
Remedy
CD-ROM disc is not
recognized by the
system.
• Make sure that the CD-ROM was recorded using the ISO 9660 disc
format. See General disc compatibility on page 8 for other disc compatibility
information.
Files don’t show up in • The files on the disc must be named with the correct file extention: .mp3
the Disc Navigator/
Photo Browser.
for MP3 files; .wma for WMA files; .jpg for JPEG files (upper or lower-case
is OK). See General disc compatibility on page 8 for other disc compatibility
information.
Can play JPEG files,
but not WMA/MP3
• Set the PhotoViewer menu option in the Initial Settings menu to Off to
be able to access the WMA/MP3 files. Set to On to be able to play the JPEG
files on the same disc files. See PhotoViewer on page 67.
(or vice versa).
80
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
13
Tuner
Problem
Considerable noise in • Connect the antenna (refer to the Setup Guide).
radio broadcasts. • Fully extend the FM wire antenna, position for best reception, and secure
Remedy
to a wall.
• Connect an outdoor FM antenna (see Connecting external antennas on
page 68).
• Adjust the direction and position for best reception.
• Connect an additional internal or external AM antenna (refer to the Setup
Guide and Connecting external antennas on page 68).
• Turn off any other equipment that may be causing the noise or move it
away from the main unit.
• The tuning interval is incorrect for your country or region. Try switching
the tuning interval (frequency step) (see Changing the frequency step on
page 74).
Auto tuning does not • The radio signal is weak. Auto tuning will only detect radio stations with a
pick up some stations. good signal. For more sensitive tuning, connect an outdoor antenna.
Sound is mono only.
• Check that the tuner is not set to FM mono (see Improving poor FM
reception on page 27).
Error Messages
Message
Desciption
Child Lock
• This message appears when the front panel buttons are pressed when
the child lock feature is active. See Child Lock on page 73 for more on
switching on/off the child lock.
Rec Mode On
Phones In
96K Stereo
No Surr. SP
Muting
• Blinks rapidly for 2 seconds when an operation is prohibited because the
Recording Mode is on (see Recording mode on page 70).
• Blinks rapidly for 2 seconds when an operation is prohibited because
headphones are connected.
• Blinks rapidly for 2 seconds when an operation is prohibited because the
source is digital 88.2 or 96kHz PCM.
• Blinks rapidly for 2 seconds when an operation is prohibited because
there is no surround speaker output.
• Blinks rapidly for 2 seconds when an operation is prohibited because the
sound is muted (see Muting the sound on page 34).
Exit
• Appears briefly when a menu is automatically exited after a set period of
inactivity.
81
En
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Additional information
Set to 4:3 (Pan&Scan), widescreen discs are
shown with the left and right sides cropped.
Although the picture looks larger, you don’t
actually see the whole picture.
Screen sizes and disc formats
DVD-Video discs come in several different
screen aspects, ranging from TV programs,
which are generally 4:3, to CinemaScope
widescreen movies, with an aspect ratio of up
to about 7:3.
Televisions also come in different aspect
ratios; ‘standard’ 4:3 and widescreen 16:9.
Widescreen TV users
Please note that many widescreen discs
override the system’s settings so that the disc
is shown in letterbox format regardless of the
setting.
If you have a widescreen TV, the TV Screen
setting (page 60) of this system should be set
to 16:9 (Wide).
When you watch discs recorded in 4:3 format,
you can use the TV controls to select how the
picture is presented. Your TV may offer
various zoom and stretch options; see the
instructions that came with your TV for
details.
• Using the 16:9 (Wide) setting with a
standard 4:3 TV, or either of the 4:3
settings with a widescreen TV, will result
in a distorted picture.
Please note that some movie aspect ratios are
wider than 16:9, so even though you have a
widescreen TV, these discs will still play in a
‘letterbox’ style with black bars at the top and
bottom of the screen.
Selecting languages using the
language code list
Some of the language options (see Language
settings on page 62) allow you to set your
prefered language from any of the 136
languages listed in the Language code list on
page 83.
Standard TV users
If you have a standard TV, the TV Screen
setting (page 60) of this system should be set
to 4:3 (Letter Box) or 4:3 (Pan&Scan),
depending on which you prefer.
1
Select ‘Other Language’.
Set to 4:3 (Letter Box), widescreen discs are
shown with black bars top and bottom.
2
Use the ꢂ/ꢃ (cursor left/right)
buttons to select either a code letter or a
code number.
3
Use the ꢀ/ꢁ (cursor up/down)
buttons to select a code letter or a code
number.
See the Language code list on page 83 (next
page) for a complete list of languages and
codes.
82
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
13
Language code list
Language (Language code letter), Language code
Japanese (ja), 1001
English (en), 0514
French (fr), 0618
German (de), 0405
Italian (it), 0920
Spanish (es), 0519
Dutch (nl), 1412
Russian (ru), 1821
Chinese (zh), 2608
Korean (ko), 1115
Greek (el), 0512
Basque (eu), 0521
Persian (fa), 0601
Finnish (fi), 0609
Fiji (fj), 0610
Faroese (fo), 0615
Frisian (fy), 0625
Lithuanian (lt), 1220
Latvian (lv), 1222
Malagasy (mg), 1307
Maori (mi), 1309
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Moldavian (mo), 1315
Marathi (mr), 1318
Malay (ms), 1319
Maltese (mt), 1320
Burmese (my), 1325
Nauru (na), 1401
Samoan (sm), 1913
Shona (sn), 1914
Somali (so), 1915
Albanian (sq), 1917
Serbian (sr), 1918
Siswati (ss), 1919
Sesotho (st), 1920
Sundanese (su), 1921
Swedish (sv), 1922
Swahili (sw), 1923
Tamil (ta), 2001
Telugu (te), 2005
Tajik (tg), 2007
Thai (th), 2008
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Setswana (tn), 2014
Tonga (to), 2015
Turkish (tr), 2018
Irish (ga), 0701
Scots-Gaelic (gd), 0704
Galician (gl), 0712
Guarani (gn), 0714
Gujarati (gu), 0721
Hausa (ha), 0801
Hindi (hi), 0809
Croatian (hr), 0818
Hungarian (hu), 0821
Armenian (hy), 0825
Interlingua (ia), 0901
Interlingue (ie), 0905
Inupiak (ik), 0911
Indonesian (in), 0914
Icelandic (is), 0919
Hebrew (iw), 0923
Yiddish (ji), 1009
Javanese (jw), 1023
Georgian (ka), 1101
Kazakh (kk), 1111
Greenlandic (kl), 1112
Cambodian (km), 1113
Kannada (kn), 1114
Kashmiri (ks), 1119
Kurdish (ku), 1121
Kirghiz (ky), 1125
Latin (la), 1201
Afar (aa), 0101
Abkhazian (ab), 0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Assamese (as), 0119
Aymara (ay), 0125
Azerbaijani (az), 0126
Bashkir (ba), 0201
Byelorussian (be), 0205
Bulgarian (bg), 0207
Bihari (bh), 0208
Bislama (bi), 0209
Bengali (bn), 0214
Tibetan (bo), 0215
Breton (br), 0218
Catalan (ca), 0301
Corsican (co), 0315
Czech (cs), 0319
Nepali (ne), 1405
Norwegian (no), 1415
Occitan (oc), 1503
Oromo (om), 1513
Oriya (or), 1518
Panjabi (pa), 1601
Polish (pl), 1612
Pashto, Pushto (ps), 1619 Tsonga (ts), 2019
Portuguese (pt), 1620
Quechua (qu), 1721
Rhaeto-Romance (rm),
1813
Kirundi (rn), 1814
Romanian (ro), 1815
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sindhi (sd), 1904
Sangho (sg), 1907
Serbo-Croatian (sh), 1908
Sinhalese (si), 1909
Slovak (sk), 1911
Tatar (tt), 2020
Twi (tw), 2023
Ukrainian (uk), 2111
Urdu (ur), 2118
Uzbek (uz), 2126
Vietnamese (vi), 2209
Volapük (vo), 2215
Wolof (wo), 2315
Xhosa (xh), 2408
Yoruba (yo), 2515
Zulu (zu), 2621
Welsh (cy), 0325
Danish (da), 0401
Bhutani (dz), 0426
Esperanto (eo), 0515
Estonian (et), 0520
Lingala (ln), 1214
Laothian (lo), 1215
Slovenian (sl), 1912
Country code list
Country, Country code, Country code letter
Argentina, 0118, ar
Australia, 0121, au
Austria, 0120, at
Belgium, 0205, be
Brazil, 0218, br
Canada, 0301, ca
Chile, 0312, cl
China, 0314, cn
Denmark, 0411, dk
Finland, 0609, fi
France, 0618, fr
Germany, 0405, de
Hong Kong, 0811, hk
India, 0914, in
Indonesia, 0904, id
Italy, 0920, it
Japan, 1016, jp
Korea, Republic of, 1118,
kr
Mexico, 1324, mx
Spain, 0519, es
Switzerland, 0308, ch
Sweden, 1905, se
Taiwan, 2023, tw
Thailand, 2008, th
United Kingdom, 0702, gb
United States of America,
Netherlands, 1412, nl
New Zealand, 1426, nz
Norway, 1415, no
Pakistan, 1611, pk
Philippines, 1608, ph
Portugal, 1620, pt
Russian Federation, 1821, 2119, us
ru
Singapore, 1907, sg
Malaysia, 1325, my
83
En
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Additional information
Preset code list
Please note that there are cases where only certain functions may be controllable after
assigning the proper preset code, or the codes for the manufacturer in the list will not work for
the model that you are using.
MANUFACTURER Code(s)
ACURA 644
ERRES 607
ITC 642
OSUME 648
ADMIRAL 631
AIWA 660
AKAI 632, 635, 642
AKURA 641
FERGUSON 607, 636, 651
FINLANDIA 635, 643, 655
FINLUX 632, 607, 645, 648, JVC 613, 623
ITT 631, 632, 642
JEC 605
OTTO VERSAND 631, 632,
607, 642
PALLADIUM 638
PANAMA 646
653, 654, 655
KAISUI 618, 641, 644
ALBA 607, 639, 641, 644
AMSTRAD 642, 644, 647
ANITECH 644
ASA 645
FIRSTLINE 640, 644
KAPSCH 631
KENDO 642
KENNEDY 632, 642
KORPEL 607
PANASONIC 631, 607,
608,642, 622
PATHO CINEMA 642
PAUSA 644
PHILCO 632, 642
PHILIPS 631, 607, 634, 656
PHOENIX 632
FISHER 632, 635, 638, 645
FORMENTI 632, 607, 642
FRONTECH 631, 642, 646
ASUKA 641
FRONTECH/PROTECH 632 KOYODA 644
AUDIOGONIC 607, 636
BASIC LINE 641, 644
BAUR 631, 607, 642
BEKO 638
FUJITSU 648, 629
FUNAI 640, 646, 658
GBC 632, 642
GE 601, 608, 607, 610, 617, LUXOR 632, 642, 643
602, 628, 618
GEC 607, 634, 648
GELOSO 632, 644
GENEXXA 631, 641
LEYCO 607, 640, 646, 648
LIESENK&TTER 607
LOEWE 607
PHONOLA 607
PROFEX 642, 644
PROTECH 607, 642, 644,
646, 649
QUELLE631, 632, 607, 642,
645, 653
BEON 607
M-ELECTRONIC 631, 644,
645, 654, 655, 656, 607,
636, 651
BLAUPUNKT 631
BLUE SKY 641
BLUE STAR 618
BPL 618
MAGNADYNE 632, 649
GOLDSTAR 610, 623, 621, MAGNAFON 649
R-LINE 607
BRANDT 636
BTC 641
602, 607, 650
GOODMANS 607, 639,
647, 648, 656
GORENJE 638
GPM 641
GRAETZ 631, 642
GRANADA 607, 635, 642,
643, 648
GRADIENTE 630, 657
GRANDIN 618
GRUNDIG 631, 653
HANSEATIC 607, 642
HCM 618, 644
MAGNAVOX 607, 610,
603, 612, 629
MANESTH 639, 646
MARANTZ 607
MARK 607
MATSUI 607, 639, 640,
642, 644, 647, 648
MCMICHAEL 634
MEDIATOR 607
MEMOREX 644
METZ 631
RADIOLA 607
RADIOSHACK 610, 623,
621, 602
BUSH 607, 641, 642, 644,
647, 656
CASCADE 644
CATHAY 607
CENTURION 607
CGB 642
RBM 653
RCA 601, 610, 615, 616,
617, 618, 661, 662, 609
REDIFFUSION 632, 642
REX 631, 646
ROADSTAR 641, 644, 646
SABA 631, 636, 642, 651
SAISHO 639, 644, 646
SALORA 631, 632, 642, 643
CIMLINE 644
CLARIVOX 607
CLATRONIC 638
CONDOR 638
CONTEC 644
MINERVA 631, 653
MITSUBISHI 609, 610, 602, SAMBERS 649
CROSLEY 632
CROWN 638, 644
CRYSTAL 642
CYBERTRON 641
DAEWOO 607, 644, 656
DAINICHI 641
DANSAI 607
DAYTON 644
DECCA 607, 648
DIXI 607, 644
DUMONT 653
ELIN 607
HINARI 607, 641, 644
HISAWA 618
HITACHI 631, 633, 634,
636, 642, 643, 654, 606,
610, 624, 625, 618
HUANYU 656
HYPSON 607, 618, 646
ICE 646, 647
IMPERIAL 638, 642
INDIANA 607
INGELEN 631
INTERFUNK 631, 632, 607, OCEANIC 631, 632, 642
642
INTERVISION 646, 649
ISUKAI 641
621, 631
MULTITECH 644, 649
NEC 659
NECKERMANN 631, 607
NEI 607, 642
NIKKAI 605, 607, 641, 646, SCHAUB LORENZ 642
SAMSUNG 607, 638, 644,
646
SANYO 635, 645, 648, 621,
614
SBR 607, 634
648
SCHNEIDER 607, 641, 647
SEG 642, 646
SEI 632, 640, 649
SELECO 631, 642
SHARP 602, 619, 627
SIAREM 632, 649
SIEMENS 631
NOBLIKO 649
NOKIA 632, 642, 652
NORDMENDE 632, 636,
651, 652
ELITE 641
ELTA 644
EMERSON 642
ORION 632, 607, 639, 640
OSAKI 641, 646, 648
OSO 641
SINUDYNE 632, 639, 640,
649
84
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
13
SKANTIC 643
TANDY 631, 641, 648
TASHIKO 634
TATUNG 607, 648
TEC 642
TELEAVIA 636
TELEFUNKEN 636, 637,
652
TELETECH 644
TENSAI 640, 641
THOMSON 636, 651, 652,
663
THORN 631, 607, 642, 645, VOXSON 631
SOLAVOX 631
SONOKO 607, 644
SONOLOR 631, 635
SONTEC 607
648
WALTHAM 643
WATSON 607
WATT RADIO 632, 642,
649
TOMASHI 618
TOSHIBA 605, 602, 626,
621, 653
SONY 604
TOWADA 642
ULTRAVOX 632, 642, 649
UNIVERSUM 631, 607,
WHITE
WESTINGHOUSE 607
YOKO 607, 642, 646
SOUNDWAVE 607
STANDARD 641, 644
STERN 631
SUSUMU 641
SYSLINE 607
638, 642, 645, 646, 654, 655 ZENITH 603, 620
VESTEL 607
VICTOR 613
PIONEER 600, 631, 632,
607, 636, 642, 651
85
En
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Additional information
Dolby Pro Logic / Pro Logic II
Glossary
Analog audio
An electrical signal that directly represents
sound. Compare this to digital audio which
can be an electrical signal, but is an indirect
representation of sound. See also Digital
audio.
A matrix decoding system that extracts 4.1
(Dolby Pro Logic) or 5.1 (Dolby Pro Logic II)
channel surround sound from a two channel
source.
DRM
Aspect ratio
DRM (digital rights management) is a type of
server software developed to enable secure
distribution of paid content over the web,
recently incorporated by WMA (Windows
Media Audio ).
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the
screen is almost square); widescreen models
are 16:9 (the screen is almost twice as wide as
it is high).
DTS
Digital audio
An indirect representation of sound by
numbers. During recording, the sound is
measured at discrete intervals (44,100 times a
second for CD audio) by an analog-to-digital
converter, generating a stream of numbers.
On playback, a digital-to-analog converter
generates an analog signal based on these
numbers. See also Sampling frequency and
Analog audio.
R
DTS stands for Digital Theater Systems. DTS
is a surround system different from Dolby
Digital that has become a popular surround
sound format for movies.
Dynamic range
The difference between the quietest and
loudest sounds possible in an audio signal
(without distorting or getting lost in noise).
Dolby Digital and DTS soundtracks are
capable of a very wide dynamic range, deliv-
ering dramatic cinema-like effects.
Dolby Digital
1
Using a maximum of 5.1 channels of audio,
this high quality surround system is used in
many of the finer movie theaters around the
world.
EXIF (Exchangeable Image File)
A file format developed by Fuji Photo Film for
digital still cameras. Digital cameras from
various manuafcturers use this compressed
file format which carries date, time and
thumbnail information, as well as the picture
data.
The on-screen display shows which channels
are active, for example showing 3/2.1. The 3
being the two front channels and the center
channel; the 2 being the surround channels,
and the .1 being the LFE channel.
86
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
13
File extension
PBC (PlayBack Control) (Video CD/Super
VCD only)
A system of navigating a Video CD/Super VCD
through on-screen menus recorded onto the
disc. Especially good for discs that you would
normally not watch from beginning to end all
at once—karaoke discs, for example.
A tag added to the end of a filename to indi-
cate the type of file. For example, “.mp3” indi-
cates an MP3 file.
Interlaced video
A method of displaying a picture in which
odd-numbered lines are updated in one pass,
then even-numbered lines are updated in the
next. See also Progressive scan video.
PCM (Pulse Code Modulation)
The most common system of encoding digital
audio, found on CDs and DAT. Excellent
quality, but requires a lot of data compared to
formats such as Dolby Digital and MPEG
audio. See also Digital audio.
ISO 9660 format
International standard for the volume and file
structure of CD-ROM discs.
Progressive scan video
JPEG
Also called non-interlaced video, this method
of displaying a picture updates all the lines in
one pass, resulting in a more stable, flicker-
free image than interlaced video (for a given
scanning rate). See also Interlaced video.
A file format used for still images, such as
photographs and illustrations. JPEG files are
identified by the file extension “.jpg” or “.JPG”.
Most digital cameras use this format.
MP3
Regions (DVD-Video only)
MP3 (MPEG1 audio layer 3) is a compressed
audio file format. Files are recognized by their
file extension “.mp3” or “.MP3”.
These associate discs and players with partic-
ular areas of the world. This system will only
play discs that have compatible region codes.
You can find the region code of your system
by looking on the rear panel. Some discs are
compatible with more than one region (or all
regions).
MPEG audio
An audio format used on Video CDs and some
DVD discs. This system can convert MPEG
audio to PCM format for wider compatibility
with digital recorders and AV amplifiers. See
also PCM (Pulse Code Modulation).
Sampling frequency
The rate at which sound is measured to be
turned into digital audio data. The higher the
rate, the better the sound quality, but the
more digital information is generated. Stan-
dard CD audio has a sampling frequency of
44.1kHz, which means 44,100 samples
(measurements) per second. See also Digital
audio.
MPEG video
The video format used for Video CDs and
DVDs. Video CD uses the older MPEG-1 stan-
dard, while DVD uses the newer and much
better quality MPEG-2 standard.
87
En
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Additional information
WMA
WMA is short for Windows Media Audio and
refers to an audio compression technology
developed by Microsoft Corporation. WMA
data can be encoded by using Windows
Media Player version 8 or Windows Media
Player for Windows XP. Files are recognized
by their file extension “.wma” or “.WMA”.
Microsoft, Windows Media, and the Windows
logo are trademarks, or registered
trademarks of Microsoft Corporation in the
United States and/or other countries.
88
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
13
Australian/New Zealand/Singapore/
Specifications
Malaysian models. . . . . . . . . . . . . . . . . 160 W
Hong Kong model . . . . . . . . . . . . . . . . 607 W
Taiwan model . . . . . . . . . . . . . . . . . . . . 157 W
Power consumption in standby . . . . . . . 0.39 W
Dimensions. . . 420 (W) x 70 (H) x 403.5 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7.4 kg
Amplifier section
Continuous Power Output (RMS):
Front, Center, Surround . . . . 75 W per channel
(1 kHz, 10 % T.H.D., 6 Ω)
Subwoofer . . . .75 W (100 Hz, 10 % T.H.D., 6 Ω)
Continuous Power Output :
Front, Center, Surround . . . . 62 W per channel
(1 kHz, 1 % T.H.D., 6 Ω)
Accessories (DVD/CD receiver)
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . 1
AA/R6 dry cell batteries . . . . . . . . . . . . . . . . . . .2
Video cable (yellow plugs) . . . . . . . . . . . . . . . . .1
AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . .1
FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Setup Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
These operating instructions. . . . . . . . . . . . . . .1
Warranty Card (European/U.K./
Subwoofer . . . . .62 W (100 Hz, 1 % T.H.D., 6 Ω)
Disc section
Digital audio
characteristics . . . . . . . . DVD fs: 96 kHz, 24-bit
Type. . . . . . . DVD system, video CD system and
compact disc digital audio system
Frequency response . . . . . . . . . . 4 Hz to 44 kHz
Wow and Flutter. . . . . . . Limit of measurement
Australian/New Zealand models only) . . . . . . .1
(
0.001 % W.PEAK) or less (JEITA)
Speaker System
FM tuner section
Frequency range . . . . . . . . . . . . 87.5 – 108 MHz
Antenna . . . . . . . . . . . . . . . . . 75 Ω, unbalanced
Front and surround speakers
Enclosure . . . . . . . . .Closed-box bookshelf type
(magnetically shielded)
System. . . . . . . . . . . . . . . 15x6 cm 1-way system
Speakers . . . . . . . . . . . . . . . . 15x6 cm cone type
Nominal impedance. . . . . . . . . . . . . . . . . . . .6 Ω
Frequency range . . . . . . . . . . . .90 Hz to 20 kHz
Maximum Input Power. . . . . . . . . . . . . . . . 75 W
Dimensions. . . . . 78 (W) x 210 (H) x 82 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.7 kg
AM tuner section
Frequency range
With 9kHz step. . . . . . . .531 kHz to 1,602 kHz
With 10kHz step (Not applicable to
the European model) . .530 kHz to 1,700 kHz
Antenna . . . . . . . . . . . . . . . . . . . . .Loop antenna
Center speaker
Enclosure . . . . . . . . .Closed-box bookshelf type
(magnetically shielded)
System. . . . . . . . . . . . . . . 15x6 cm 1-way system
Speakers . . . . . . . . . . . . . . . . 15x6 cm cone type
Nominal impedance. . . . . . . . . . . . . . . . . . . .6 Ω
Frequency range . . . . . . . . . . . .78 Hz to 20 kHz
Maximum Input Power. . . . . . . . . . . . . . . . 75 W
Dimensions. . . . . 240 (W) x 85 (H) x 96 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.75 kg
Miscellaneous
Power requirements
European/Singapore models
. . . . . . . . . . . . . . . . . .AC 220-230 V, 50/60 Hz
U.K. model . . . . . . . . . . . . AC 230 V, 50/60 Hz
Australian/New Zealand/Malaysian models
. . . . . . . . . . . . . . . . . . . . . AC 240 V, 50/60 Hz
Hong Kong model . . . . . AC 220-230 V, 50 Hz
Taiwan model. . . . . . . . . AC 110-120 V, 60 Hz
Power consumption
European/U.K. model . . . . . . . . . . . . . . 160 W
89
En
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Additional information
Subwoofer
Enclosure . . . . . . . . . . . . . Bass-reflex floor type
(magnetically shielded)
System. . . . . . . . . . . . . . . . .16 cm 1-way system
Speaker . . . . . . . . . . . . . . . . . . .16 cm cone type
Nominal impedance. . . . . . . . . . . . . . . . . . . .6 Ω
Frequency range . . . . . . . . . . . 35 Hz to 2.8 kHz
Maximum Input Power. . . . . . . . . . . . . . . . 75 W
Dimensions. . . 130 (W) x 360 (H) x 360 (D) mm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5 kg
This product includes FontAvenue®
fonts licenced by NEC corporation.
FontAvenue is a registered trademark
of NEC Corporation.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this copyright
protection technology must be authorized
by Macrovision Corporation, and is
Accessories (Speaker system)
Speaker cables . . . . . . . . . . . . . . . . . . . . . . . . . .6
Non-slip pads (Small). . . . . . . . . . . . . . . . . . . .20
Non-slip pads (Large). . . . . . . . . . . . . . . . . . . . .4
intended for home and other limited uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
• Specifications and design subject to
possible modification without notice, due
to improvements.
This product is intended for household
purposes. Any failure due to use for other
than household purposes (such as long-
term use for business purposes in a
restaurant or use in a car or ship) and
which requires repair will be charged for
even in the warranty period.
KO41_En
90
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
13
91
En
Download from Www.Somanuals.com. All Manuals Search And Download.
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 656-472-1111
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
<TCLZZ/03C00001>
Printed in
<XRB3023-A>
Download from Www.Somanuals.com. All Manuals Search And Download.
|