Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Environment
CAUTION
Operating environment temperature and humidity:
+5 ºC to +35 ºC (+41 ºF to +95 ºF); less than 85 %RH
(cooling vents not blocked)
The STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from
the AC outlet to shut down all power. Therefore,
make sure the unit has been installed so that the
power cord can be easily unplugged from the AC
outlet in case of an accident. To avoid fire hazard,
the power cord should also be unplugged from the
AC outlet when left unused for a long period of time
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
D3-4-2-1-7c_A_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat
radiation (at least 10 cm at top, 10 cm at rear, and
10 cm at each side).
(for example, when on vacation).
D3-4-2-2-2a_A_En
WARNING
Slots and openings in the cabinet are provided for
ventilation to ensure reliable operation of the
product, and to protect it from overheating. To
prevent fire hazard, the openings should never be
blocked or covered with items (such as newspapers,
table-cloths, curtains) or by operating the
This product is for general household purposes. Any
failure due to use for other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which
requires repair will be charged for even during the
warranty period.
K041_En
equipment on thick carpet or a bed.
D3-4-2-1-7b_A_En
POWER-CORD CAUTION
If the AC plug of this unit does not match the AC
outlet you want to use, the plug must be removed
and appropriate one fitted. Replacement and
mounting of an AC plug on the power supply cord of
this unit should be performed only by qualified
service personnel. If connected to an AC outlet, the
cut-off plug can cause severe electrical shock. Make
sure it is properly disposed of after removal.
Handle the power cord by the plug. Do not pull out the
plug by tugging the cord and never touch the power
cord when your hands are wet as this could cause a
short circuit or electric shock. Do not place the unit, a
piece of furniture, etc., on the power cord, or pinch the
cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed such that they
are not likely to be stepped on. A damaged power cord
can cause a fire or give you an electrical shock. Check
the power cord once in a while. When you find it
The equipment should be disconnected by removing
the mains plug from the wall socket when left
unused for a long period of time (for example, when
damaged, ask your nearest PIONEER authorized
service center or your dealer for a replacement. S002_En
on vacation).
D3-4-2-2-1a_A_En
For Taiwan exclusively
Taiwanese two pin flat-bladed plug
Download from Www.Somanuals.com. All Manuals Search And Download.
01
Contents
01 Before you start
What’s in the box . . . . . . . . . . . . . . . . . . . 6
Putting the batteries in the remote
control. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using the remote control. . . . . . . . . . . . . . 6
Disc/content format playback
compatibility . . . . . . . . . . . . . . . . . . . . . . . 7
About the internal hard disk drive . . . . . . 12
Symbols used in this manual . . . . . . . . . 13
05 Recording
About DVD recording . . . . . . . . . . . . . . . 32
About HDD recording. . . . . . . . . . . . . . . 33
Recorded audio . . . . . . . . . . . . . . . . . . . 34
Restrictions on video recording . . . . . . . 34
Using the built-in TV tuner . . . . . . . . . . . 35
Setting the picture quality/
recording time . . . . . . . . . . . . . . . . . . . . 36
Basic recording from the TV. . . . . . . . . . 37
Setting a timer recording . . . . . . . . . . . . 38
Simultaneous recording and playback
(Chase Play) . . . . . . . . . . . . . . . . . . . . . . 46
Recording from an external
02 Connections
Rear panel connections. . . . . . . . . . . . . . 14
Front panel connections . . . . . . . . . . . . . 15
Easy connections . . . . . . . . . . . . . . . . . . 16
Using other types of video output . . . . . . 17
Connecting to a cable box or satellite
component. . . . . . . . . . . . . . . . . . . . . . . 46
Automatic recording from a satellite
tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Playing your recordings on other DVD
players . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Initializing recordable DVD discs . . . . . . 49
DVD-RW Auto Initialize. . . . . . . . . . . . . . 50
receiver (1) . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting to a cable box or satellite
receiver (2) . . . . . . . . . . . . . . . . . . . . . . . 19
Connecting to an AV amplifier or
receiver . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Connecting using HDMI . . . . . . . . . . . . . 21
Connecting other AV sources . . . . . . . . . 23
Connecting a USB device . . . . . . . . . . . . 23
Plugging in . . . . . . . . . . . . . . . . . . . . . . . 24
06 Playback
Introduction . . . . . . . . . . . . . . . . . . . . . . 51
Basic playback . . . . . . . . . . . . . . . . . . . . 51
Using the Disc Navigator with recordable
discs and the HDD. . . . . . . . . . . . . . . . . 55
Using the Disc Navigator with
03 Controls and displays
playback-only discs . . . . . . . . . . . . . . . . 56
Scanning discs. . . . . . . . . . . . . . . . . . . . 57
Playing in slow motion . . . . . . . . . . . . . . 57
Frame advance/frame reverse . . . . . . . . 58
The Play Mode menu . . . . . . . . . . . . . . . 58
Displaying and switching subtitles. . . . . 60
Switching DVD and DivX
Front panel . . . . . . . . . . . . . . . . . . . . . . . 25
Display . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Remote control . . . . . . . . . . . . . . . . . . . . 27
04 Getting started
Switching on and setting up . . . . . . . . . . 29
soundtracks . . . . . . . . . . . . . . . . . . . . . . 61
Switching audio channels . . . . . . . . . . . 61
Switching camera angles. . . . . . . . . . . . 62
Displaying disc information
on-screen . . . . . . . . . . . . . . . . . . . . . . . . 62
4
En
Download from Www.Somanuals.com. All Manuals Search And Download.
07 Playing and recording from a DV
camcorder
Playing from a DV camcorder . . . . . . . . . 64
Recording from a DV camcorder. . . . . . . 64
About DV. . . . . . . . . . . . . . . . . . . . . . . . . 66
12 The Disc Setup menu
Basic settings. . . . . . . . . . . . . . . . . . . . 102
Initialize settings . . . . . . . . . . . . . . . . . 103
Finalize settings . . . . . . . . . . . . . . . . . . 103
Optimize HDD . . . . . . . . . . . . . . . . . . . 103
Initialize HDD . . . . . . . . . . . . . . . . . . . . 104
08 Editing
Editing options . . . . . . . . . . . . . . . . . . . . 67
The Disc Navigator screen. . . . . . . . . . . . 68
13 The Video Adjust menu
Setting the picture quality for TV and
external inputs . . . . . . . . . . . . . . . . . . . 105
Setting the picture quality for disc
09 Copying and backup
playback. . . . . . . . . . . . . . . . . . . . . . . . 106
Introduction . . . . . . . . . . . . . . . . . . . . . . 79
One Touch Copy . . . . . . . . . . . . . . . . . . . 79
Using Copy Lists . . . . . . . . . . . . . . . . . . . 81
Using disc backup. . . . . . . . . . . . . . . . . . 85
14 The Initial Setup menu
Using the Initial Setup menu . . . . . . . . 108
Selecting other languages for
language options . . . . . . . . . . . . . . . . . 120
10 Using the Jukebox
Copying music to the HDD . . . . . . . . . . . 87
Copying files via USB . . . . . . . . . . . . . . . 88
Playing music from the Jukebox . . . . . . . 90
Changing the display style of
the Jukebox. . . . . . . . . . . . . . . . . . . . . . . 92
Copying albums/tracks . . . . . . . . . . . . . . 93
Editing the HDD Jukebox . . . . . . . . . . . . 93
15 Additional information
Minimum copying times. . . . . . . . . . . . 121
Manual recording modes . . . . . . . . . . . 122
Troubleshooting . . . . . . . . . . . . . . . . . . 123
If the picture freezes and the front panel
and remote control buttons stop
working . . . . . . . . . . . . . . . . . . . . . . . . 128
On-screen displays. . . . . . . . . . . . . . . . 129
Front panel displays . . . . . . . . . . . . . . . 131
Setting up the remote to control
11 The PhotoViewer
Locating JPEG picture files . . . . . . . . . . . 94
Changing the display style of the
your TV . . . . . . . . . . . . . . . . . . . . . . . . . 132
Language code list . . . . . . . . . . . . . . . . 133
Country/Area code list . . . . . . . . . . . . . 133
Screen sizes and disc formats . . . . . . . 134
Handling discs . . . . . . . . . . . . . . . . . . . 135
Cleaning the pickup lens . . . . . . . . . . . 135
Condensation. . . . . . . . . . . . . . . . . . . . 135
Hints on installation . . . . . . . . . . . . . . . 136
Moving the recorder . . . . . . . . . . . . . . . 136
Resetting the recorder . . . . . . . . . . . . . 136
Specifications. . . . . . . . . . . . . . . . . . . . 137
PhotoViewer . . . . . . . . . . . . . . . . . . . . . . 95
Playing a slideshow. . . . . . . . . . . . . . . . . 95
Reloading files from a disc or
USB device . . . . . . . . . . . . . . . . . . . . . . . 96
Importing files to the HDD . . . . . . . . . . . 96
Selecting multiple files or folders . . . . . . 97
Copying files to a DVD-R/-RW . . . . . . . . . 97
Copying selected files to
a DVD-R/-RW. . . . . . . . . . . . . . . . . . . . . . 98
Editing files on the HDD . . . . . . . . . . . . . 99
Printing files . . . . . . . . . . . . . . . . . . . . . 101
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
Chapter 1
Before you start
• When disposing of used batteries,
please comply with governmental
regulations or environmental public
instruction’s rules that apply in your
country or area.
What’s in the box
Please confirm that the following
accessories are in the box when you open it;
• Remote control
WARNING
• AA/R6P dry cell batteries x 2
• Audio/video cable (red/white/yellow)
• RF antenna cable
Do not use or store batteries in direct sunlight or
other excessively hot place, such as inside a car or
near a heater. This can cause batteries to leak,
overheat, explode or catch fire. It can also reduce the
life or performance of batteries.
D3-4-2-3-3_En
• Power cable
• These operating instructions
Using the remote control
Putting the batteries in the
remote control
Please keep in mind the following when
using the remote control:
• Make sure that there are no obstacles
between the remote and the remote
sensor on the unit.
•
Insert two AA/R6P batteries into the
battery compartment following the
indications (,) inside the
compartment.
• Remote operation may become
unreliable if strong sunlight or
fluorescent light is shining on the unit’s
remote sensor.
• Remote controllers for different devices
can interfere with each other. Avoid
using remotes for other equipment
located close to this unit.
• Replace the batteries when you notice a
fall off in the operating range of the
remote.
Important
Incorrect use of batteries can result in
hazards such as leakage and bursting.
Please observe the following:
• When the batteries run down or you
change the batteries, the remote control
mode is reset to Recorder 1. See Remote
Control Mode on page 118.
• Don’t mix new and old batteries
together.
• Don’t use different kinds of batteries
together — although they may look
similar, different batteries may have
different voltages.
• Use within the operating range in front of
the remote control sensor on the front
panel, as shown.
• Make sure that the plus and minus ends
of each battery match the indications in
the battery compartment.
7 m
• Remove batteries from equipment that
isn’t going to be used for a month or
more.
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
• You can control this recorder using the
remote sensor of another Pioneer
component via the CONTROL IN jack on
the rear panel. See Rear panel
connections on page 14 for more
information.
The following table shows older Pioneer DVD
recorders’ limited compatibility with
DVD-RW ver. 1.2 discs.
Model
Playable
Recordable
*1,2,3
DVR-7000
No
Yes
*1
DVR-310
DVR-510H
No
Yes
Disc/contentformatplayback
compatibility
*1
Discs should be finalized in this recorder before
playing. Unfinalized VR mode and Video mode discs
may not play.
Compatible media
• DVD-RW ver. 1.1 / 1x / 1x to 2x, ver. 1.2 /
2x to 4x / 2x to 6x
*2
Cannot read the CPRM information will show in
the display when you load a disc. However, this will not
affect playback.
*3
• DVD-R ver. 2.0 / 1x / 1x to 4x / 1x to 8x /
1x to 16x, ver. 2.1 / 1x to 8x / 1x to 16x
Copy-once protected disc titles will not play.
• DVD+RW 1x to 2.4x / 1x to 4x / 3.3x to 8x
Readable file system
• DVD+R 1x to 2.4x / 1x to 4x / 1x to 8x /
1x to 16x
This recorder can play DVDs recorded under
1
the following file systems : ISO 9660*,
UDF 1.02, UDF 1.50, UDF 2.00, UDF 2.01.
• DVD-RAM ver. 2.0 / 2x, ver. 2.1 / 2x /
2x to 3x / 2x to 5x, ver. 2.2 / 2x / 2x to 3x /
2x to 5x
* ISO 9660 Level 1 or 2 compliant. Romeo and
Joliet file systems are both compatible with
this recorder.
• DVD-R DL ver. 3.0 / 2x to 4x / 2x to 8x
• DVD+R DL 2.4x / 2.4x to 8x
Note that older models of DVD recorders and
DVD writers may reject DVD-RW ver. 1.2
discs and/or corrupt the data on the disc. If
you want to share DVD-RW discs between
this recorder and an older recorder/writer,
we recommend using ver. 1.1 discs.
Note
1 • Depending on the recording technique used, even files recorded in compatible file systems may not play
correctly.
• MP3/WMA/DivX files can be played back when recorded onto a DVD that contains no video titles and uses the
UDF 1.02, UDF 1.50, UDF 2.01 or ISO 9660 file systems.
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
HDD/DVD Recording and playback compatibility
This recorder can play and record all widely-used DVD disc types, and additionally provides
HDD functionality. The table below shows some specific compatibility differences between
the different disc types.
DVD
+RW
DVD
-RAM
HDD
DVD-R
DVD-RW
DVD+R
Marks used in this
manual
HDD
DVD (VR) DVD (Video) DVD (VR) DVD (Video)
*1 *1 *2
DVD+RW
DVD-RAM
DVD+R
*13, 16
Logos
*3
*3
*3
*14
Re-recordable/
Erasable
*4
*4
*4
*4
Editing of recorded
programmes
*12
*12
*12
Recording of Copy-
once protected
material
n/a
*5
*6
*7
*6
*6, 15
*8
*9
Playback in other
players/recorders
Chase play
16:9 and 4:3
programme
recording
*10, 11
*11
*11
*11
Dual mono/
Bilingual broadcast
recording of both
audio channels
*11 Only when the recording mode is not set to LPCM.
*12 CPRM-compatible discs only.
Notes to table
*1 Must be initialized for VR mode recording
(page 103).
*13 Take the disc out of the cartridge before use. Only
Panasonic and Maxell discs have been tested to work
reliably with this recorder. Discs from other makers may
become unusable when recorded or edited.
*14 Erasing a title does not increase the available
recording time, nor increase the number of recordable
titles left.
*15 Must be compatible with DVD+R playback.
*16 Depending on the disc, it may have to be initialized
before it can be recorded (page 103). In this case,
initialization will take about an hour.
*2 Must be initialized for Video mode recording
(page 103).
*3 Erasable, but free space does not increase.
*4 Cannot erase sections, edit chapters or use playlist
editing.
*5 Must be compatible with DVD-R (VR) playback.
*6 Finalize using this recorder (may not playback in
some units) (page 48).
*7 Must be compatible with DVD-RW (VR) playback.
*8 Must be compatible with DVD+RW playback.
*9 Must be compatible with DVD-RAM playback.
*10 Only when HDD Recording Format is set to Video
Mode Off (page 115).
is a trademark of DVD Format/Logo
Licensing Corporation.
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
The DVD side of a DualDisc plays in this
product. DVD-Audio content will not play.
Using DVD-R DL/DVD+R DL discs
DVD-R DL (Dual-Layer) and DVD+R DL
(Double-Layer) discs contain two recordable
layers on a single side, giving about
1.8 times the recording capacity of a
conventional single-layer disc. This unit can
record to both DVD-R DL and DVD+R DL
discs.
For more detailed information on the
DualDisc specification, please refer to the
disc manufacturer or disc retailer.
Other disc compatibility
In addition to DVD, this recorder is
compatible with a wide range of disc types
(media) and formats. Playable discs will
generally feature one of the logos on the disc
and/or disc packaging shown below. Note
however that some disc types, such as
recordable CD (and DVD), may be in an
unplayable format — see below for further
compatibility information.
• If you intend to play DVD-R DL (Video
mode) or DVD+R DL discs recorded on
this unit on other DVD recorders/players,
you must finalize them. (Note that some
DVD recorders/players may not play
even finalized DL discs.)
• This logo indicates that the disc is a
DVD-R DL or DVD+R DL disc:
Audio CD
CD-R
CD-RW
Correct operation has been confirmed for DL
discs:
Super Video CD (Super VCD)
Video CD
• DVD-R DL ver. 3.0/2x to 4x
Mitsubishi Kagaku Media (Verbatim)
• DVD-R DL ver. 3.0/2x to 8x
Mitsubishi Kagaku Media (Verbatim)
That’s
JVC
CD-R/-RW compatibility
This recorder cannot record CD-R or CD-RW
discs.
• Readable formats: CD audio, Video CD/
Super VCD, ISO 9660 CD-ROM*
containing MP3, WMA, JPEG or DivX
files
* ISO 9660 Level 1 or 2 compliant. CD
physical format: Mode1, Mode2 XA Form1.
Romeo and Joliet file systems are both
compatible with this recorder.
• DVD+R DL 2.4x
Mitsubishi Kagaku Media (Verbatim)
RICOH
• DVD+R DL 2.4x to 8x
Mitsubishi Kagaku Media (Verbatim)
RICOH
About DualDisc playback
A DualDisc is a new two -sided disc, one side
of which contains DVD content – video,
audio, etc. – while the other side contains
non-DVD content such as digital audio
material.
• Multi-session playback: Yes (except CD
audio and Video CD/Super VCD)
• Unfinalized disc playback: CD audio only
Compressed audio compatibility
• Compatible media: DVD-ROM,
DVD-R/-RW, DVD+R/+RW, DVD-RAM,
CD-ROM, CD-R, CD-RW, USB
The non-DVD, audio side of the disc is not
compliant with the CD audio specification
and therefore may not play.
• Compatible formats: MPEG-1 Audio
Layer 3 (MP3), Windows Media Audio
(WMA)
It is possible that when loading or ejecting a
DualDisc, the opposite side to that being
played will be scratched. Scratched discs
may not be playable.
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
• Sampling rates: 32 kHz, 44.1 kHz or
48 kHz
DivX video compatibility
• Bit-rates: Any (128 kbps or higher
recommended)
• Variable bit-rate (VBR) MP3 playback:
Yes
DivX is a compressed digital video format
created by the DivX video codec from DivX,
• VBR WMA playback: No
®
• WMA encoder compatibility: Windows
Media Codec 8 (files encoded using
Windows Media Codec 9 may be playable
but some parts of the specification are not
supported; specifically, Pro, Lossless,
Voice and VBR)
Inc. Keeping the same terminology as
DVD-Video, individual DivX video files are
called “Titles”. When naming files/titles on a
disc prior to burning, keep in mind that by
default they will be played in alphabetical
order.
1
• DRM (Digital Rights Management) file
playback: No
®
• Official DivX Certified product.
®
• Plays all versions of DivX video
• File extensions: .mp3, .wma (these must
be used for the recorder to recognize
MP3 and WMA files – do not use for
other file types)
®
(including DivX 6) with standard
®
playback of DivX media files.
• File extensions: .avi and .divx (these
must be used for the recorder to
recognize DivX video files). Note that all
files with the .avi extension are recognized
as MPEG4, but not all of these are
necessarily DivX video files and therefore
may not be playable on this recorder.
• File structure: The recorder can load up
to 99 folders/999 files at one time (if there
are more files/folders that this on the disc
then more can be reloaded)
WMA (Windows Media™ Audio)
content
This recorder can playback Windows Media
Audio content.
• File structure: Up to 99 folders or
999 files.
DivX, DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under
license.
WMA is an acronym for Windows Media
Audio and refers to an audio compression
technology developed by Microsoft
Corporation.
®
DivX VOD content
DivX
Windows Media is a trademark of Microsoft
Corporation.
In order to play DivX VOD (video on demand)
content on this recorder, you first need to
register the recorder with your DivX VOD
content provider. You do this by generating a
DivX VOD registration code, which you
submit to your provider.
This product includes technology owned by
Microsoft Corporation and cannot be used or
distributed without a license from Microsoft
Licensing, Inc.
Note
1 DRM (digital rights management) copy protection is a technology designed to prevent unauthorized copying by
restricting playback, etc. of compressed audio files on devices other than the PC (or other recording equipment)
used to record it. For detailed information, please see the instruction manuals or help files that came with your
PC and/or software.
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
Some DivX VOD content may only be
playable a fixed number of times. When you
load a disc containing this type of DivX VOD
content, the remaining number of plays is
shown on-screen and you then have the
option of playing the disc (thereby using up
one of the remaining plays), or stopping. If
you load a disc that contains expired DivX
VOD content (for example, content that has
zero remaining plays), the message Rental
Expired is displayed.
PC-created disc compatibility
Discs recorded using a personal computer
may not be playable in this unit due to the
setting of the application software used to
create the disc. In these particular
instances, check with the software publisher
for more detailed information.
Discs recorded in packet write mode (UDF
format) are not compatible with this
recorder.
Check the DVD-R/-RW or CD-R/-RW
software disc boxes for additional
compatibility information.
If your DivX VOD content allows an unlimited
number of plays, then you may load the disc
into your recorder and play the content as
often as you like, and no message will be
displayed.
Dolby Digital
Important
• DivX VOD content is protected by a DRM
system. This restricts playback of
content to specific, registered devices.
• If you load a disc that contains DivX VOD
content not authorized for this recorder,
the message Authorization Error is
displayed and the content will not play.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
• Resetting the recorder (as described in
Resetting the recorder on page 136) will
not cause you to lose your registration
code.
DTS
JPEG file compatibility
• Compatible formats: Baseline JPEG and
EXIF 2.2* still image files
*File format used by digital still cameras
“DTS” and “DTS Digital Out” are registered
trademarks of DTS, Inc.
• Sampling ratio: 4:4:4, 4:2:2, 4:2:0
• Horizontal resolution: 160 to 5120 pixels
• Vertical resolution: 120 to 3840 pixels
• Progressive JPEG compatible: No
• File extensions: .jpg, .jpeg, .jpe, .jif, .jfif
(must be used for the recorder to
recognize JPEG files – do not use for
other file types)
• File structure: The recorder can load up
to 99 folders/999 files at one time (if there
are more files/folders that this on the disc
then more can be reloaded)
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
• The HDD is very delicate. If used over
time in an improper manner or in an
unsuitable environment, it is possible
that the HDD will fail. Signs of problems
include playback unexpectedly freezing
and noticeable block noise (mosaic) in
the picture. However, sometimes there
will be no warning signs of HDD failure.
If the HDD fails, no playback of recorded
material will be possible. In this case it
will be necessary to replace the HDD
unit.
About the internal hard disk
drive
The internal hard disk drive (HDD) is a fragile
piece of equipment. When used without the
proper care or in the wrong conditions, it is
possible that recorded contents may be
damaged or lost entirely, in some cases
making even normal playback or recording
impossible. Please understand that in the
event of repair or replacement of the HDD or
related components, all your HDD
recordings will be lost.
Optimizing HDD performance
As you record and edit material on the HDD,
the data on the disk becomes fragmented,
eventually affecting the recorder’s
performance. Before this happens, the
recorder will warn you that it is time to
optimize the HDD (which you can do from
the Disc Setup menu; see Optimize HDD on
page 103).
Please use the recorder following the
guidelines below to protect against possible
HDD failure.
The HDD should not be regarded as a place to
store recordings permanently. We
recommend that you back up your important
recordings onto DVD discs in order to protect
against accidental loss.
Pioneer cannot under any circumstances
accept responsibility for any direct or indirect
loss arising from any inconvenience or loss of
recorded material resulting from HDD failure.
• Install and use the recorder on a stable,
level surface.
• Do not block the rear vent/cooling fan.
• Do not use the recorder in excessively
hot or humid places, or in places that
may be subject to sudden changes in
temperature. Sudden changes in
temperature can cause condensation to
form inside the recorder. This can be a
cause of HDD failure.
• Do not move the recorder immediately
after switching it off. If you need to move
the recorder, please follow the steps
below:
1 After the message POWER OFF is
shown on the front panel display, wait at
least two minutes.
2 Unplug from the wall socket.
3 Move the recorder.
• If there’s a power failure while the
recorder is on there is a chance that
some data on the HDD will be lost.
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you start
01
Symbols used in this manual
The following icons are provided to help you
quickly identify which instructions you need
for which kind of disc.
HDD
HDD
DVD
Any type of DVD disc
(recordable or playback
only), finalized or not.
DVD-Video
Commercially produced
DVD, finalized Video mode
DVD-R/-RW.
DVD (Video)
Video mode DVD-R/-RW
(unfinalized)
DVD (VR)
VR mode DVD-R/-RW
DVD+R
DVD+R
DVD+RW
DVD+RW
DVD-RAM
DVD-RAM
CD
Audio CD
Video CD
Video CD
Super VCD
Super VCD
WMA/MP3
WMA or MP3 files
DivX
DivX files
ALL
All of the above
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
02
CChoaptnern2 ections
Rear panel connections
1
2
3
4
5
ANTENNA
COMPONENT VIDEO OUT
PB
Y
PR
IN
DIGITAL
AUDIO OUT
OUTPUT 2
S-VIDEO
INPUT 3
S-VIDEO
AUDIO
VIDEO
R
L
AC IN
CONTROL
IN
COAXIAL
HDMI OUT
OUT
R
AUDIO
L
VIDEO
INPUT 1/AUTO START REC
OUTPUT 1
6
7
8
9
10
1
ANTENNA IN (RF IN)/OUT
7
OUTPUT 1
Connect your TV antenna to the ANTENNA
IN (RF IN) jack. The signal is passed through
to the ANTENNA OUT jack for connection to
your TV.
Stereo analog audio, video and S-Video
outputs for connection to a TV or AV
amplifier/receiver.
8
OUTPUT 2
2
INPUT 3
Stereo analog audio, video and S-Video
outputs for connection to a TV or AV
amplifier/receiver.
Stereo analog audio, video and S-Video
inputs for connection to a satellite receiver,
set top box, etc.
9
CONTROL IN
3
COMPONENT VIDEO OUT
Use to control this recorder from the remote
sensor of another Pioneer component with a
CONTROL OUT terminal and bearing the
Pioneer mark. Connect the CONTROL
OUT of the other component to the
CONTROL IN of this recorder using a mini-
plug cord.
A high-quality video output for connecting to
a TV or monitor with a component video
input.
4
HDMI OUT
HDMI output for high quality digital audio
and video.
10 AC IN – Power inlet
5
DIGITAL AUDIO OUT (COAXIAL)
Connect to a power outlet using the supplied
power cable after making all other
connections.
Coaxial digital audio jack for connecting to
an AV amplifier/receiver, Dolby Digital/DTS
decoder or other equipment with a digital
input.
6
INPUT 1/AUTO START REC
Stereo analog audio, video and S-Video
inputs for connection to a satellite receiver,
set top box, etc.
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
02
Front panel connections
On the front panel there is a flip-down cover
that hides more connections.
Left side:
DV IN
USB
11
12
13
11 DV IN
A DV input i.LINK connector, suitable for
connecting a DV camcorder.
12 USB port (Type B)
USB port for connecting a PictBridge-
compatible printer or PC.
13 USB port (Type A)
USB port for connecting a digital camera,
keyboard or other USB device.
Right side:
INPUT
2
S-VIDEO
VIDEO
L(MONO)
R
AUDIO
14
14 INPUT 2
Audio/video input (stereo analog audio;
composite and S-Video), especially suitable
for camcorders, game consoles, portable
audio, etc.
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
02
1
Connect your TV antenna/cable TV
Easy connections
outlet to the ANTENNA IN (RF IN) jack on
this recorder.
The setup described here is a basic
configuration that allows you to record TV
programmes on both this recorder and your
VCR. When watching recordings from this
recorder, set your TV to input 1; switch to
input 2 to watch a video playing in the VCR.
2
Use an RF antenna cable (one is
supplied) to connect the ANTENNA OUT
jack on this recorder to the antenna input
on your VCR.
• If you are not connecting a VCR in the
chain, connect this recorder directly to
your TV and skip the next step.
Important
• This recorder is equipped with copy
protection technology. Do not connect
this recorder to your TV via a VCR (or your
VCR via this recorder) using AV cables,
as the picture from this recorder will not
appear properly on your TV.
3
Use an RF antenna cable to connect
the antenna output on your VCR to the
antenna input on your TV.
4
Connect the AUDIO and VIDEO
OUTPUT jacks (1 or 2) to a set of audio/
video inputs on your TV.
• Before making or changing any rear
panel connections, make sure that all
components are switched off and
unplugged from the wall outlet.
Use the supplied three-pin audio/video
cable. It is colour-coded to help you match
them up (red/white for the right/left audio
connections and yellow for video in/outs).
Make sure you match up the left and right
outputs with their corresponding inputs for
correct stereo sound.
1
Antenna/cable TV
wall outlet
ANTENNA
IN (RF IN)
ANTENNA
IN
COMPONENT VIDEO OUT
PR
P
B
Y
DIGITAL
OUTPUT
S-VIDEO
2
AUDIO OUT
5
Connect your VCR to your TV (A/V
INPUT
3
S-VIDEO
AUDIO
VIDEO
R
L
AC IN
CONTROL
IN
HDMI OUT
COAXIAL
IN 2 above) using a set of audio and
video cables.
• See the following page if you want to use
S-Video or component video cables for
the video connection.
OUT
R
AUDIO
L
VIDE
INPUT
1/AUTO START REC
OUTPUT
1
ANTENNA
OUT
OUTPUT 1
2
4
To antenna input
From antenna
From audio/
video output
VCR
output
5
To audio/
video input
3
To antenna input
To audio/
video input
TV
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
02
1
Connecting using an S-Video output
Using other types of video
output
S-Video carries the picture as separate
colour and luminance (brightness) signals.
There are two S-Video outputs for
connection to TVs, monitors, VCRs or other
equipment.
This recorder has standard (composite),
S-Video and component video outputs. The
main difference between them is the quality
of the picture. S-Video delivers a better
picture than composite video, while
component video gives better picture quality
still. The variety of outputs also gives you the
flexibility of connecting your particular
equipment using the best connection type
available.
•
Use an S-Video cable (not supplied) to
connect an S-VIDEO OUTPUT (1 or 2) to
an S-Video input on your TV, monitor (or
other equipment).
2
Connecting using the component
video output.
Component video carries the picture as two
separate colour signals, plus a luminance
(brightness) signal.
To component
video input
To S-Video
input
See also Component Video Out on page 110
for how to set up the component video
output for use with a progressive scan-
compatible TV.
2
TV
1
COMPONENT
VIDEO OUT
•
Use a component video cable (not
ANTENNA
IN
OMPONENT IDEO OUT
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
input on your TV, monitor (or other
equipment).
P
R
PB
Y
DIGITAL
OUTPUT
S-VIDEO
2
AUDIO OUT
INPUT
3
S-VIDEO
AUDIO
VIDEO
R
L
AC IN
CONTROL
IN
HDMI OUT
COAXIAL
OUT
R
AUDIO
L
VIDEO
INPUT
1/AUTO START REC
O
S-VIDEO
OUTPUT
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
02
Connecting to a cable box or
satellite receiver (1)
Antenna/cable TV
wall outlet
1
ANTENNA
IN (RF IN)
If you are using a cable box or satellite
ANTENNA
IN
COMPONENT VIDEO OUT
P
R
PB
Y
DIGITAL
OUTPUT
S-VIDEO
2
AUDIO OUT
INPUT
3
S-VIDEO
AUDIO
VIDEO
R
L
AC IN
CONTROL
IN
HDMI OUT
COAXIAL
receiver with only a few scrambled channels,
OUT
R
AUDIO
L
VID
INPUT
1/AUTO START REC
1
OUTPUT
1
follow the setup on this page . If many or all
ANTENNA
OUT
OUTPUT 1
the channels are scrambled, we recommend
using the setup on the following page.
INPUT 1/AUTO
START REC
1
Using the setup on this page you can:
To antenna
input
3
• Record unscrambled channels by
selecting them on this recorder.
From antenna
output
From audio/
• Record scrambled channels by selecting
them on the cable box/satellite receiver
and using the Auto Start Recording
feature (see Automatic recording from a
satellite tuner on page 47).
Cable box/
2
video output
1
Satellite receiver
To antenna
input
To audio/
video input
• Watch one channel while recording
another.
TV
Important
1
Connect RF antenna cables as shown.
This enables you to watch and record TV
channels.
• Do not connect this recorder ‘through’
your VCR, satellite receiver or cable box.
Always connect each component
directly to your TV or AV amplifier/
receiver.
2
Connect the AUDIO and VIDEO
OUTPUT jacks (1 or 2) on this recorder to
a set of audio/video inputs on your TV
using a set of A/V cables (as supplied).
This enables you to watch the output from
this recorder.
3
Connect the audio/video output of
your cable box/satellite receiver to the
INPUT 1 jacks on this recorder using a set
of A/V cables.
This enables you to record scrambled TV
channels.
Note
1 The diagram shows standard video connections, but you can alternatively use the S-Video or component video
connections if they’re available.
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
02
Connecting to a cable box or
satellite receiver (2)
Antenna/cable TV
wall outlet
1
From audio/
video output
To antenna
input
If many or all the channels you receive by
cable or satellite are scrambled, we
1
recommend using this setup.
From antenna
output
Cable box/
Using the setup on this page you can:
Satellite receiver
3
• Record any channel by selecting it on
the cable box/satellite receiver.
ANTENNA
IN (RF IN)
INPUT 1/AUTO
START REC
• Record using the Auto Start Recording
feature (see Automatic recording from a
satellite tuner on page 47).
ANTENNA
IN
COMPONENT VIDEO OUT
P
R
PB
Y
DIGITAL
AUDIO OUT
OUTPUT
S-VIDEO
2
S-VIDEO
DIO
V
L
AC IN
CONTROL
IN
HDMI OUT
COAXIAL
OUT
R
AUDIO
L
VIDEO
INPUT
1/AUTO START REC
OUTPUT
1
ANTENNA
OUT
OUTPUT 1
Important
2
• Do not connect this recorder ‘through’
your VCR, satellite receiver or cable box.
Always connect each component
directly to your TV or AV amplifier/
receiver.
1
To audio/
video input
To antenna
input
TV
1
Connect RF antenna cables as shown.
This enables you to watch and record TV
channels.
2
Connect the AUDIO and VIDEO
OUTPUT jacks (1 or 2) on this recorder to
a set of audio/video inputs on your TV
using a set of A/V cables (as supplied).
This enables you to watch discs.
3
Connect the audio/video output of
your cable box/satellite receiver to the
INPUT 1 jacks on this recorder using a set
of A/V cables.
This enables you to record scrambled TV
channels.
Note
1 • The setup on this page does not allow you to watch one channel and record another.
• The diagram shows standard video connections, but you can alternatively use the S-Video or component video
connections if they’re available.
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
02
Connecting to an AV
amplifier or receiver
Antenna/cable TV
wall outlet
1
ANTENNA
IN (RF IN)
To enjoy multichannel surround sound you
need to connect this recorder to an AV
amplifier/receiver using the digital coaxial
output. In addition to the digital connection,
we recommend also connecting using the
stereo analog connection.
ANTENNA
IN
COMPONENT VIDEO OUT
P
R
PB
Y
DIGITAL
OUTPUT
S-VIDEO
2
AUDIO OUT
INPUT
3
S-VIDEO
AUDIO
VIDEO
R
L
AC IN
CONTROL
IN
HDMI OUT
COAXIAL
OUT
R
AUDIO
L
VIDE
INPUT
1/AUTO START REC
OUTPUT
1
ANTENNA
OUT
DIGITAL
AUDIO OUT
OUTPUT 1
2
To digital
3
To audio/video input
input
You’ll probably also want to connect a video
output to your AV amplifier/receiver. Use the
standard (composite) video output (as
shown here), or the S-Video or component
video connections.
1
From video
output
AV amplifier/receiver
4
To antenna
input
To video
input
See also Audio Out on page 111 for how to
set up the digital audio output. (Noise may
be output from your speakers if the recorder
is not set up to work with your AV amplifier/
receiver.)
TV
1
Connect RF antenna cables as shown.
Important
This enables you to watch and record TV
channels.
• Do not connect this recorder to your TV
‘through’ your VCR or other component
using A/V cables. Always connect it
directly to your TV.
2
Connect the AUDIO and VIDEO
OUTPUT jacks (1 or 2) on this recorder to
a set of audio/video inputs on your AV
amplifier/receiver.
3
Use an coaxial digital audio cable (not
supplied) to connect the DIGITAL AUDIO
OUT (COAXIAL) jack on this recorder to
an coaxial digital input on your AV
amplifier/receiver.
This enables you to listen to multichannel
1
surround sound.
4
Connect the AV amplifier/receiver’s
video output to a video input on your TV.
Note
1 If your AV amplifier/receiver doesn’t have an coaxial digital input, but has a optical type, converter boxes that
convert from coaxial to optical are available at specialist audio dealers.
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
02
page 116 for more information. Note that the
HDMI settings remain in effect until you
change them, or connect a new HDMI
component.
Connecting using HDMI
1
If you have an HDMI or DVI-equipped
2
monitor or display , you can connect it to
3
this recorder using an HDMI cable (not
supplied).
Important
The HDMI connector outputs uncompressed
digital video, as well as almost every kind of
digital audio.
• An HDMI connection can only be made
with DVI-equipped components
compatible with both DVI and
High-bandwidth Digital Content
1
Use an HDMI cable to connect the
Protection (HDCP). If you choose to
connect to a DVI connector, you will
need a DVI to HDMI adaptor cable. A DVI
to HDCP connection, however, does not
support audio. Consult your local audio
dealer for more information.
HDMI OUT connector on this recorder to
an HDMI connector on an HDMI-
compatible display.
To HDMI
input
• The HDMI connection is compatible with
32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 16 bit/
20 bit/24 bit 2-channel linear PCM
signals, as well as Dolby Digital, DTS and
MPEG audio bitstream.
HDMI-compatible display
HDMI
OUT
• If your connected component is only
compatible with Linear PCM, the signal
is output as Linear PCM (DTS audio is
not output).
ANTENNA
IN
COMPONENT VIDEO OUT
PR
PB
Y
ITAL
OUTPUT
2
UDIO OUT
INPUT
3
S-VIDEO
S-VIDEO
AUDIO
VIDEO
R
L
C IN
CONTROL
IN
HDMI OUT
OUT
R
AUDIO
L
VIDEO
INPUT
1/AUTO START REC
OUTPUT
1
• If you have connected to a Pioneer
plasma display, please select the HDMI
setup on the display (refer to the
supplied manual for more on this).
• The arrow on the cable connector body
should be face down for correct
alignment with the connector on the
recorder.
About HDMI
HDMI (High-Definition Multimedia
Interface) supports both video and audio on
a single digital connection for use with DVD
players and recorders, DTV, set-top boxes,
and other AV devices. HDMI was developed
to provide the technologies of
When connected to an HDMI component or
HDCP-compatible DVI component, the
HDMI indicator lights.
HDMI setup is generally automatic. There
are however settings you can change if you
need to. See HDMI Output (only available
when an HDMI device is connected) on
High-bandwidth Digital Content Protection
(HDCP) as well as Digital Visual Interface
(DVI) in one specification. HDCP is used to
protect digital content transmitted and
received by DVI-compliant displays.
Note
1 Depending on the component you have connected, using a DVI connection may result in unreliable signal
transfers.
2 The pixel resolution of this recorder’s HDMI video output is (according to TV format): NTSC (720 x 480i/p,
1280 x 720p, 1920 x 1080i/p) and PAL (720 x 576i/p, 1280 x 720p, 1920 x 1080i/p). If your display is not compatible
with these resolutions the picture may not be correctly reproduced.
21
En
3 We recommend you use an HDMI cable that supports HDMI category 2.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
02
HDMI has the capability to support
connected plasma television, you can have
this unit’s language settings automatically
change to those of the plasma television
(language information can be received only
when no media is being played back and no
recordings are taking place, or when you
choose not to display this unit’s GUI
displays).
standard, enhanced, or high-definition video
plus standard to multi-channel surround-
sound audio. HDMI features include
uncompressed digital video, a bandwidth of
up to five gigabits per second (Dual Link),
one connector (instead of several cables and
connectors), and communication between
the AV source and AV devices such as DTVs.
Important
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
• Depending on the type of plasma
television, some HDMI input terminals
do not support the HDMI Control
function. For details, see the operating
instructions supplied with your plasma
television.
HDMI Control
By connecting this unit to an HDMI Control-
compatible Pioneer plasma television, AV
system (amplifier or AV receiver etc.) with an
HDMI cable, you can control this unit from
the remote control of a connected plasma
television, as well as have the connected
plasma television automatically change
inputs in response to this unit starting
playback.
• To use the following functions, set this
unit’s HDMI Control to Off (page 117).
– When you use Auto Start Recording
(page 47).
– When you want this unit to
automatically switch off upon
completion of timer recording. (When
HDMI Control is set to On, this unit
does not automatically switch off if your
plasma television is switched on upon
completion of timer recording.)
Refer to the operating instructions for your
plasma television or AV system for more
information about which operations can be
carried out by connecting via HDMI cable.
– When using the Video Control function
of an external component.
Auto-select function
You can have a connected plasma television
or AV system automatically change inputs
when playback begins on this unit (including
when you have a GUI (such as Disc
Navigator) set to display on this unit).
Certain connected plasma televisions may
have their power turned from off to on when
using this function.
– Child lock settings (page 45).
• HDMI Control may not operate properly
if you do not use an HDMI cable that
supports the HDMI 1.3 Specification.
• Controls may not function properly in
certain situations, such as immediately
after you have connect an HDMI cable,
turn this unit’s power off or remove the
power cable for this unit or the
connected component. If you experience
any problems, set HDMI Control to On
for all connected units, and then display
the pictures stored on this unit on your
plasma television to improve the
situations.
Simultaneous power function
You can have this unit turn on automatically
when the power for a connected plasma
television is turned on. To have this unit’s
power turned off when a connected plasma
television is turned off, you must change the
simultaneous power function of your plasma
television.
• We cannot guarantee this unit will work
with HDMI Control-compatible
components other than those made by
Pioneer.
Unified language function
By receiving language information from a
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
02
Connecting a DV camcorder
You can connect a DV camcorder or DVD
recorder with DV output to the front panel
DV IN jack.
Connecting other AV sources
Connecting a VCR or analog
camcorder
Important
HDD/DVD
OPEN/CLOSE
• This jack is for connection to DV
equipment only. It is not compatible with
digital satellite receivers or D-VHS video
decks.
Div
X
C
O
P
Y
HDMI
S
T
A
NDB
Y
/O
N
DV IN
USB
INPUT
2
S-VIDEO
VIDEO
L(MONO)
R
AUDIO
REC
ONE TOUCH
COPY
STOP REC
INPUT
SELECT
CH
REC MODE
AUDIO/VIDEO
OUTPUT
AUDIO/VIDEO
INPUT
(Rear panel)
(Front panel)
HDD/DVD
OPEN/CLOSE
DivX
C
O
PY
HDMI
S
T
A
NDB
Y
/O
N
DV IN
USB
INPUT
2
S-VIDEO
VIDEO
L(MONO)
R
AUDIO
REC
ONE TOUCH
COPY
STOP REC
INPUT
SELECT
CH
REC MODE
DV
IN
1
2
To audio/
video input
From audio/
video output
Analog camcorder
From DV output
DV camcorder
VCR
• Use a DV cable (not supplied) to
connect the DV jack of your DV
1
Connect a set of audio and video
camcorder to the front panel DV IN
jack of this recorder.
inputs of your VCR or camcorder to a set
of outputs on this recorder.
This enables you to record from this recorder
to your VCR or camcorder.
Connecting a USB device
• You can use standard video or S-Video
cables for the video connection.
Using the USB ports on the front of the
recorder you can connect USB devices such
as digital cameras, printers, keyboards and
PCs. Please also see the instructions that
came with the device you want to connect
before using.
2
Connect a set of audio and video
outputs of your VCR or camcorder to a
set of inputs on this recorder.
This enables you to record tapes from your
VCR or camcorder.
HDD/DVD
OPEN/CLOSE
D
iv
X
C
O
P
Y
HDMI
• You can use standard video or S-Video
cables for the video connection.
S
T
A
N
D
B
Y
/
O
N
D
V
I
N
USB
INPUT
2
S-VIDEO
VIDEO
L(MONO)
R
AUDIO
REC
ONE TOUCH
COPY
STOP REC
INPUT
SELECT
CH
REC MODE
USB
(Type B)
USB
(Type A)
• The front panel connections make
convenient connections for a camcorder
input.
USB
USB
• When connecting an external AV source
that only supports monaural sound, only
insert the left (white) audio jack to this
device. Doing so will allow the same
sound track to be recorded to both
channels. You must connect to the
INPUT 2 jack on the front panel.
Digital Camera
PictBridge-compatible
Printer
Keyboard
PC
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
02
• In the event of unreliable operation with
the hub, we recommend plugging the
device directly into the recorder’s USB
port.
Important
• Some USB devices may not work with
this recorder.
• Operation may become unreliable if too
many devices are connected to the hub.
In this case, try unplugging some
devices.
• When connecting a PC to this unit, make
sure the power is turned off on both the
PC and this unit when you connect them
via USB.
• If the power delivered through a hub is
insufficient for the devices connected,
communication can become unreliable.
In this case, disconnect one or more
devices then perform a USB restart. (See
Restart USB Device on page 118.)
• We recommend connecting USB
devices when this recorder is switched
off (in standby).
JPEG file storage devices
• Digital still camera
• Memory card reader (any type of memory
card)
Using a USB printer
• Use a PictBridge-compatible printer.
• USB memory
The Mass Storage Class (MSC) device
should be FAT-compatible. Note that if the
device is partitioned, this recorder may not
recognize it.
Using a USB keyboard
• Do not use a PS/2 keyboard connected
using a PS/2-USB adapter.
Using a PC
The Picture Transfer Protocol (PTP) can be
used to transfer up to a maximum of 4000
files.
• Note that you can connect a PC to this
device via USB to copy WMA and MP3
files. For more information, see Connect
PC on page 88. To use Connect PC with
this device, your PC must run either the
Windows XP Home Edition (SP2),
Windows XP Professional (SP2) or
Windows Vista Home Premium
operating system and be able to run
Windows Media Player 11. Even if your
PC can run Windows Media Player 11,
we cannot guarantee that it will function
properly with this device. For more
details see the ‘Help’ section of Windows
Media Player 11.
WMA/MP3 file storage devices
• Memory card reader (any type of memory
card)
• USB memory
• PC (Use Connect PC function)
The Mass Storage Class (MSC) device
should be FAT-compatible. Note that if the
device is partitioned, this recorder may not
recognize it.
Note that although multi-slot card readers
can be used, the recorder will only recognize
the first card inserted. To read another card,
remove all the cards and insert the card to be
read again.
Plugging in
After checking all the connections, plug in
the recorder.
Using a USB hub
• Use a hub compatible with USB 1.1 and/
or 2.0.
•
Use the supplied power cable to
connect this recorder to a power outlet.
• Use an independently powered hub (bus
powered hubs may not work reliably).
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
03
Chapter 3
Controls and displays
Front panel
1
2
3
4
5
6
7
8
HDD/DVD
OPEN/CLOSE
DivX
COPY
HDMI
STANDBY/ON
DV IN
USB
INPUT
2
S-VIDEO
VIDEO
L(MONO)
R
AUDIO
REC
ONE TOUCH
COPY
STOP REC
INPUT
SELECT
CH
REC MODE
9
10
DivX indicator
11
10
12
1
11
Lights when this recorder plays DivX video
files.
Press to start or restart playback.
2
HDD/DVD
Press to stop playback.
Press to switch between HDD and DVD for
recording and playback.
F STOP REC
Press to stop recording.
3
COPY indicator
ONE TOUCH COPY
Lights when copying is underway.
Press to start One Touch Copy of the
currently playing title to DVD or the HDD.
4
5
Disc tray
HDD/DVD indicator
CH +/–
Indicator lights blue when the hard disk
(HDD) is selected; orange when the DVD
drive is selected.
Use to change channels, skip chapters/
tracks, etc.
6
OPEN/CLOSE
Press to open/close the disc tray.
HDMI indicator
INPUT SELECT
Press to change the input used for
recording.
7
Lights when this recorder is connected to
HDMI (HDCP) compatible component.
REC MODE
Press repeatedly to cycle through
recording modes (picture quality).
8
Front panel display and IR remote
sensor
12 REC
See Display on page 26 for details.
Press to start recording. Press repeatedly to
set the recording time in 30 minute blocks.
9
STANDBY/ON
Press to switch the recorder on/into standby.
10 Front panel inputs
See Front panel connections on page 15 for
more information on these.
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
Display
03
1
2
3
4
5
6
PM
L
R
P
10
9
8
7
1
6
Recording quality indicators (page 36)
Lights during playback; blinks when
playback is paused.
XP
Lights when the recording mode is set to
2
XP (best quality).
Lights when copying.
SP
3
Lights when the recording mode is set to
Lights during recording; blinks when
recording is paused.
SP (standard play).
LP/SLP
4
PM
Lights when the recording mode is set to
LP (long play) or SLP (super-long play).
Lights to indicate PM (after midday) for the
clock display.
EP/SEP
Lights when the recording mode is set to
EP (extended play) or SEP (super-
extended play).
5
(page 38)
Lights when a timer recording has been
set. (Indicator blinks if the timer has been
set to DVD but there isn’t a recordable
disc loaded, or the timer has been set to
HDD but the HDD is not recordable.)
MN
Lights when the recording mode is set to
MN (manual recording level) mode.
NTSC
7
8
Character display
Lights when the video output signal
format is NTSC.
R/RW
Indicates the type of recordable DVD loaded:
DVD-R or DVD-RW.
(page 111)
9
AUTO
Taiwan and Philippines model:
Indicates which channels are recorded
when dual mono is selected.
Lights when Auto Start Recording has been
set, and during Auto Start Recording.
10 PL (page 68)
Other:
Lights when a VR mode disc is loaded
and the recorder is in Play List mode.
Indicates which channels of a bilingual
broadcast are recorded.
2 3 (page 118)
Shows theremote control mode (if nothing
is displayed, the remote control mode is 1).
(page 110)
Lights when the component video output
is set to progressive scan (except in
some cases when a component is
connected using HDMI).
SAP (page 35) (Taiwan and Philippines
model only)
V
Lights when an unfinalized Video mode
disc is loaded.
Lights when the currently selected TV
channel has a Secondary Audio
Programme channel.
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
Remote control
03
6
DVD
Press to select the DVD for recording or
playback.
7
INPUT SELECT (page 46)
1
2
4
STANDBY/ON ONE TOUCH
COPY
OPEN/CLOSE
Press to change the input to use for
recording.
3
5
HDD
DVD
INPUT
SELECT
6
7
ABC
DEF
MNO
WXYZ
8
Alphanumeric buttons, + and CLEAR
Use the number buttons for track/chapter/
title selection; channel selection, and so on.
The same buttons can also be used to enter
names for titles, discs and so on.
GHI
PQRS
JKL
8
TUV
CH
9
CLEAR
G-CODE
+
CLEAR
10
11
AUDIO
SUBTITLE
ANGLE
PLAY MODE
MENU
Use the + button to enter non-alphanumeric
characters and symbols.
12
14
DISC NAVIGATOR
TOP MENU
13
Use CLEAR to clear an entry and start again.
ENTER
15
16
HOME
MENU
RETURN
9
CH +/– (page 35)
17
19
Press to change the channel of the built-in
TV tuner.
18
HELP
DISPLAY
REV SCAN
PLAY
FWD SCAN
10 G-Code™ (page 40)
PAUSE STOP OK
BACK CM SKIP
STEP/SLOW
20
Press then use the number buttons to enter
a G-Code programming number for timer
recording.
CASE
SELECTION
NEXT
PREV
REC
STOP REC REC MODE TIMER REC
TV CONTROL
21
22
G-Code is a trademark of Gemstar
Development Corporation.
INPUT
SELECT
CHANNEL
VOLUME
The G-Code system is manufactured
under license from Gemstar Development
Corporation.
HDD/DVD RECORDER
11 DVD playback functions
AUDIO (page 35, 61)
1
ONE TOUCH COPY (page 79)
Changes the audio language or channel.
(When the recorder is stopped, press to
change the tuner audio.)
Press to start One Touch Copy of the
currently playing title to DVD or the HDD.
2
Remote control indicator
Lights when setting up the remote control
for use with a TV (page 132) and when
setting the remote control mode (page 118).
SUBTITLE (page 60)
Press to display/change the subtitles
included in multilingual DVD-Video
discs.
3
STANDBY/ON
Press to switch the recorder on/into standby.
ANGLE (page 62)
Press to switch camera angles on discs
with multi-angle scenes.
4
OPEN/CLOSE
Press to open/close the disc tray.
12 PLAY MODE (page 58)
5
HDD
Press to display the Play Mode menu (for
features such as search, repeat and
programme play).
Press to select the hard disk (HDD) for
recording or playback.
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and displays
03
13 DISC NAVIGATOR (page 55, 68)/
TOP MENU (page 52)
STOP
Press to stop playback.
Press to display the Disc Navigator screen,
or the top menu if a DVD-Video or finalized
DVD-R/-RW (Video) disc is loaded.
CM BACK (commercial back)
Press repeatedly to skip progressively
backward through the video playing.
14 MENU (page 52)
Press to display the disc menu if a DVD-
Video disc is loaded.
CM SKIP (commercial skip)
Press repeatedly to skip progressively
forward through the video playing.
15 /// and ENTER
Used to navigate all on-screen displays.
Press ENTER to select the currently
highlighted option.
PREV NEXT
Press to skip to the previous or next title/
chapter/track; or to display the previous
or next menu page.
16 HOME MENU
STEP/SLOW (page 57)
Press to display the Home Menu, from which
you can navigate all the functions of the
recorder.
During playback, press to start slow-
motion playback; while paused, press to
show the previous or next video frame.
17 RETURN
Press to go back one level in the on-screen
menu or display.
21 Recording controls (page 37)
REC
Press to start recording. Press
repeatedly to set the recording time in
blocks of 30 mins.
18 HELP
Press for help on how to use the current GUI
screen.
F STOP REC
Press to stop recording.
19 DISPLAY (page 62)
Displays/changes the on-screen information
displays.
REC MODE (page 36)
Press repeatedly to change the
recording mode (picture quality).
20 Playback controls (page 51)
REV SCAN FWD SCAN
(page 57)
Press to start reverse or forward
scanning. Press again to change the
speed.
TIMER REC (page 38)
Press to start setting a timer recording.
22 TV CONTROL (page 132)
After setting up, use these controls to
control your TV.
PLAY
Press to start playback.
PAUSE
Press to pause playback or recording.
28
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
04
Chapter 4
Getting started
Switching on and setting up
ENTER
4
Start the Setup Navigator.
When you switch the recorder on for the first
time, you can make several basic settings
using the Setup Navigator feature. This takes
you through setting the clock, the internal TV
tuner and the video output.
k
Complete this setup before you
t
start using your recorder.
e
Start
P
Cancel
p
Please use the Initial Setup if you
want to make more detailed settings.
If you’re using the recorder for the first time,
we strongly recommend you use the Setup
Navigator before starting to use the
recorder.
• If you don’t want to use the Setup
Navigator, press to select Cancel,
then press ENTER to exit the Setup
Navigator.
Important
ENTER
• Some of the Setup Navigator on-screen
displays (OSDs) in this section vary
slightly depending on the country or
region of purchase.
5
Select an option then press
ENTER.
Taiwan and Philippines model:
• Unless otherwise stated, the OSDs
shown in this manual are for the Taiwan
and Philippines model.
k AutoChannel Setting
t
e
P
Antenna
Cable
p Do not Set
1
Switch on your TV and set the video
input to this recorder.
Other:
STANDBY/ON
k AutoChannel Setting
t
ꢀ
2
Switch on the recorder.
e
P
AutoScan
Do not Set
When you switch on for the first time, your TV
should display the Setup Navigator screen (If
the Setup Navigator doesn’t appear, you can
also access it from the Initial Setup menu;
see page 108).
• Select Do not set if you want to skip
channel setup (because they have
already been set up, for example).
• You can go back to the previous screen
in the Setup Navigator by pressing
RETURN.
ENTER
3
Choose a language (then
press ENTER).
ENTER
Language
English
Español
Italiano
•
Select your country.
Português
k Country Selection
t
eCountry
P
Singapore
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
04
•
Auto-tuning channels
•
Manual clock setting
The Auto Scan option automatically scans
and sets the channel presets.
If no stations in your area are
broadcasting time signals, you can set
the clock manually.
Tuning
Use the / buttons to set your
time zone.
32/68
Cancel
You can set this by selecting a city or a
time relative to GMT.
ENTER
1/2
k Manual Clock Setting
6
Select ‘Auto’ for automatic
t
Singapore
Time Zone
e
Singapore
time setting, or ‘Manual’ to set the clock
manually.
P
p D.S.T
Off
k ClockSetting
t
Press then use the / buttons to
select ‘On’ or ‘Off’ for daylight
saving/summer time, then press
ENTER.
Select On if you are currently using
daylight saving/summer time.
e
P
Auto
Manual
•
Auto clock setting
Some TV channels broadcast time
signals together with the programme.
This recorder can use these signals to
set the clock automatically.
1/2
k Manual Clock Setting
Singapore
Time Zone
e
Singapore
P
p D.S.T
Set ‘Clock Set CH‘ to the channel
preset number that broadcasts a time
signal, then move the cursor down to
‘Start’ and press ENTER.
On
Set the date and time, then press
ENTER to make all the settings.
Taiwan and Philippines model: The date
is in month/day/year format.
k AutoClock Setting
t
Date
––
––
/
:
––
/
––––
e
Time
Other: The date is in day/month/year
format.
–– AM
P
p
Clock Set CH
2
Start
2/2
k Manual Clock Setting
t
Date
e
1
/
:
01
/
2007 MON
The recorder takes a short while to set
the time. After you see that it’s set, select
Next to proceed.
P
Time
p
Time Zone
12
00 AM
Singapore
Singapore
D.S.T
On
k AutoClock Setting
Date
1
/
01
12
/
2007 MON
00 AM
e
Time
• Use the / buttons to change the
value in the highlighted field.
:
P
p
Clock Set CH
2
Start
Next
• Use the / buttons to move from one
field to another.
• Press ENTER to finish setting the time.
If the time could not be set
automatically, press RETURN to go back
to the previous screen and select
Manual.
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
04
ENTER
10
Press to continue after reading
ENTER
the HDD caution.
7
Select the TV screen type,
‘Wide (16:9)’ or ‘Standard (4:3)’.
k Inthe event of HDD failure, recordings may
be lost or normal playback/recording may
t
not be possible.
k TVScreen Size
t
e
As recordings might be lost in case of a HDD
P
failure, we recommend to use the HDD only
e
P
Wide (16:9)
as temporary storage media.
p
Standard (4:3)
Please copy recordings you want to keep
to recordable DVD.
p Navigator
Press ENTER to continue.
ENTER
8
Select whether or not your TV
ENTER
is compatible with progressive scan
video.
11
Select ‘Finish Setup’ to exit
the Setup Navigator, or ‘Go Back’ if you
want to start again.
k Progressive
t
k Setting
e
P
Compatible
t
Setupis complete!
Not Compatible
e
p Don't Know
Finish Setup
Go Back
p
ENTER
That completes basic setup using the Setup
Navigator.
9
Set the HDMI output (only
when an HDMI component is connected).
• If there are blank channels with no
station, you can set these to skip using
the manual channel setting. See Manual
CH Setting on page 109.
k HDMI Setting
Set to the transmission mode optimized for
the connected device?
e
* Under this setting, nothing may appear
on the screen due to HDMI cables, etc.
The mode returns to the current setting
P
p
after 30 seconds.
Yes
No
• Depending on the HDMI component you
have connected, the above screen may
not appear.
• Select Yes if you want this unit to
automatically set the optimum setting
for the device connected to the HDMI
terminal.
• There are cases where nothing appears
on the screen after the automatic setup
due to an HDMI cable, etc. If you do not
perform any operations in this case, this
unit returns to the previous setting in
30 seconds.
• Select No if you want to make this
setting later.
31
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
Chapter 5
Recording
About DVD recording
Max.
chapters
(per title)
This recorder can record to DVD-R, DVD-RW,
DVD+R, DVD+RW, DVD-RAM, DVD-R DL
and DVD+R DL media.
Disc type/rec.
format
Max. titles
(per disc)
DVD-R/-RW
Video mode
99
99
49
99
DVD-R and DVD-RW discs can be initialized
for Video mode or VR mode recording. Each
has its advantages, and it depends on what
you want to do with the recording which
mode you choose.
999*1
99*2
DVD-R/-RW/-RAM
VR mode
DVD+R/+RW
If you want to edit your recordings in any
significant way, VR mode offers greater
possibilities for cutting, copying, and
changing the way the video is presented.
*1
A maximum of 999 chapters are recordable per disc.
A maximum of 254 chapters are recordable per disc.
*2
Video mode is less flexible when it comes to
editing, but it has the advantage that it is
compatible with standard DVD players
• This recorder cannot play or record
unfinalized DVD-R/-RW (Video mode)
and DVD+R discs recorded on another
recorder. DVD+RW discs recorded on
another recorder are playable on this
recorder but are not recordable.
1
(many of which won’t play VR mode discs ).
Once a disc is initialized for a particular
mode, all recording on that disc will be in
that mode.
• The maximum continuous recording
time for one title is eight hours when
using a DVD+R/+RW disc.
DVD+RW discs can be initialized for +VR
mode recording.
DVD-RAM discs can be initialized for VR
mode recording.
• If you delete a title from a DVD+R/+RW
disc, the total number of recordable
titles remaining may not increase.
DVD+R discs do not require initializing.
• Although this recorder can record PAL,
SECAM, NTSC and PAL-60, you can’t mix
multiple TV line systems on one disc. A
disc can contain PAL and SECAM
recordings, or NTSC and PAL-60. See
also Additional information about the TV
system settings on page 119.
Important
The table below shows the maximum
number of titles recordable per disc and the
maximum number of chapters per title:
Note
1 Some DVD players, such as some Pioneer models, are compatible with VR mode discs. Check the operating
instructions for your player for VR mode compatibility information.
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
• If power to the recorder is cut (due to a
power outage, the plug being pulled from
the power outlet, etc.) during recording,
editing, initializing, finalizing or other
operation, some recorded material on the
disc, or the disc itself, may become
unusable. In this case, try re-initializing
the disc (DVD-RW only), or use a new
disc. Pioneer is not responsible for lost
recordings, damaged discs or other
losses in these cases.
About HDD recording
Recording to the internal hard disk drive
(HDD) is very flexible; you have the full
choice of recording quality options,
including manual mode, and of course you
can record, erase and re-record as many
times as you like.
The capacity of the hard disk drive means
that you can store many hours of video on it,
even using the higher quality recording
modes.
• Fingerprints, dirt and small scratches on
a disc can affect playback and/or
recording performance. Please take
proper care of your discs.
Important
• The maximum number of titles/chapters
per title that can be recorded on the
HDD is 999 and 99 respectively. No more
recording is possible on the HDD after
the maximum number of titles has been
reached.
• Pioneer takes no responsibility for
recording failure due to power cuts,
defective discs, or damage to the
recorder.
• See also Disc/content format playback
compatibility on page 7 for detailed disc
compatibility information.
• The maximum continuous recording
time for one title is 12 hours.
• It is possible to record both PAL and
NTSC titles on the HDD. Before
recording, you need to make sure that
the Input Line System setting (page 108)
matches the TV line system of the source
you’re recording.
Recording to DVD-R DL/DVD+R DL
discs
Recording to DVD-R DL/DVD+R DL discs is
generally the same as recording to regular
single-layer discs; however, please note the
following points:
HDD Video mode compatibility
When recording to the HDD you can choose
to record in one of two formats. Set the
format from the HDD Recording Format
item in the Initial Setup menu (see
page 115).
• When the recorder switches from the
first layer to the second during recording
a DVD-R DL (Video mode) disc, a new
title is automatically started on the new
layer.
• Up to 99 titles can be recorded on a
DVD-R DL (Video mode) disc. If the 99th
title is being recorded when the layer is
switched, recording will stop.
Taiwan and Philippines model:
When set to Video Mode On, high-speed
copying from HDD to DVD-R/-RW (Video
mode) or DVD+R/+RW is possible. When
recording a broadcast with a Secondary
Audio Programme (SAP) channel, set which
channel you want to record from the Initial
Setup menu (see Dual Mono Recording on
page 111).
• Up to 49 titles can be recorded on a
DVD+R DL disc.
• You cannot play, record additional
material to, edit or finalize a DVD-R DL or
DVD+R DL disc that has been recorded
on but not yet finalized on another DVD
recorder.
33
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
When HDD Recording Format is set to Video
Mode Off, high-speed copying from HDD to
DVD-R/-RW (Video mode) or DVD+R/+RW
isn’t possible. However, when SAP is
selected as the broadcast audio channel,
both the main and SAP channels are
recorded and you can switch the audio on
playback.
The table below shows the different audio
output possibilities:
Audio output
Audio
setting
Left (L)
Right (R)
L + R
R
MONO
STEREO
SAP
L + R
L
L + R
SAP
Other:
When set to Video Mode On, high-speed
copying from HDD to DVD-R/-RW (Video
mode) or DVD+R/+RW is possible. When
recording a bilingual broadcast, set which
channel you want to record from the Initial
Setup menu (see Bilingual Recording on
page 111).
Other:
If the broadcast audio is bilingual and you
are recording to DVD-R/-RW (Video mode),
DVD+R/+RW, or to the HDD with the HDD
Recording Format set to Video Mode On, or
on the LPCM setting, use the Bilingual
Recording setting (page 111) to select the
A/L or B/R audio channel to record before
recording starts. In other cases, both
When HDD Recording Format is set to Video
Mode Off, high-speed copying from HDD to
DVD-R/-RW (Video mode) or DVD+R/+RW
isn’t possible. However, both channels of
bilingual broadcasts are recorded and you
can switch the audio on playback.
channels of a bilingual broadcast will be
recorded and you can switch on playback.
Restrictions on video
recording
Recorded audio
You cannot record copy-protected video
using this recorder. Copy-protected video
includes DVD-Video discs and some satellite
broadcasts. If copy-protected material is
encountered during a recording, recording
will pause automatically and an error
message will be displayed on-screen.
In all except the LPCM mode, sound is
recorded in two channel Dolby Digital format
(only Dolby Digital 2.0 can be recorded; Dolby
Digital 5.1 recording is not possible). When
set to LPCM, sound is recorded in high
quality, uncompressed Linear PCM format.
Video that is ‘copy-once only’ can only be
recorded to DVD-RAM or HDD, CPRM-
compatible VR mode DVD-R/-RW (see
below).
Taiwan and Philippines model:
If the broadcast audio has a SAP channel
and you are recording to Video mode DVD-R/
-RW, DVD+R/+RW, or to the HDD with the
HDD Recording Format set to Video Mode
On, or on the LPCM setting, use the AUDIO
button to select the Mono, Stereo or SAP
audio channel to record before recording
starts. In other cases, if SAP is selected then
both the main and SAP audio channels will
be recorded and you can switch on playback.
When recording a TV broadcast or through
an external input, you can display copy
control information on screen (see
Displaying disc information on-screen on
page 62).
34
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
CPRM
Using the built-in TV tuner
CPRM is a copy protection/scrambling
system developed for the recording of ‘copy
once’ broadcast programmes. CPRM stands
for Content Protection for Recordable Media.
There are three different ways to select TV
channels. Note that you can’t change the TV
channel during playback, recording or
during recording standby.
This recorder is CPRM compatible, which
means that you can record copy-once
broadcast programmes, but you cannot then
make a copy of those recordings. CPRM
recordings can only be made on CPRM-
compatible DVD-R (ver. 2.0/8x or higher) or
DVD-RW (ver. 1.1 or higher) discs formatted
in VR mode, DVD-RAM discs or on the HDD.
CH
•
CH +/– buttons
ABC
JKL
DEF
GHI
MNO
PQRS
TUV
WXYZ
CLEAR
•
CLEAR
Number buttons
DVD CPRM recordings can only be played
on players that are specifically compatible
with CPRM.
For example, to select channel 4, press 4
then ENTER; for channel 34, press 3, 4,
1
ENTER.
• CH +/– buttons on the front panel
Recording equipment and
copyright
Changing audio channels
Recording equipment should be used only
for lawful copying and you are advised to
check carefully what is lawful copying in the
country in which you are making a copy.
Copying of copyright material such as films
or music is unlawful unless permitted by a
legal exception or consented to by the
rightowners.
Taiwan and Philippines model:
Some TV programmes are broadcast with
both a main and a Secondary Audio
Programme (SAP). You can change the TV
audio using the AUDIO button.
AUDIO
•
Press to change the audio type.
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
The current audio channel is displayed on-
screen.
Mono
SAP
Stereo
• If SAP is selected, but there is no SAP
channel being broadcast, you will still
hear the main audio channel.
• If the sound is poor quality when set to
Stereo, you can often improve it by
changing to Mono.
Note
1 • Taiwan and Philippines model: Antenna channels are numbered 2 through 69. Cable channels are numbered
1 through 125.
• Other: Channel presets are numbered 1 through 99.
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
Note
Note
• When recording to the HDD with HDD
Recording Format set to Video Mode On,
to DVD in Video mode, or on the LPCM
setting, only one channel of a dual mono
broadcast is recorded. In this case,
decide which language you want to
record before recording by setting the
Dual Mono Recording setting (see Dual
Mono Recording on page 111).
• When recording to the HDD with HDD
Recording Format set to Video Mode On,
to DVD in Video mode, or on the LPCM
setting, only one channel of a bilingual
broadcast is recorded. In this case,
decide which language you want to
record before recording by setting the
Bilingual Recording setting (see
Bilingual Recording on page 111).
Other:
Setting the picture quality/
recording time
You can change the audio channel of the
broadcast or external input signal.
AUDIO
DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD
•
Press to change the audio type.
The current audio channel is displayed on-
screen.
Before starting a recording, you will usually
want to set the picture quality/recording
time. There are six standard settings
available, which allow you to choose a
balance between picture quality and
recording time.
• If the NICAM audio setting (see NICAM
Select on page 110) is set to NICAM and
you are watching a NICAM broadcast,
you can switch between NICAM and
Regular (non-NICAM) audio.
When Manual Recording is set to On (see
Manual Recording on page 114), a further
option will be available (MN1 to MN32,
LPCM, or XP+ (a super-high quality HDD
recording mode that features a transfer rate
of around 15 Mbps) depending on what you
set).
NICAM
Regular
• If the NICAM broadcast is bilingual, you
can also select the language.
NICAM A
Regular
NICAM B
When recording to DVD, MN32 is the
highest recording quality available. If you
select XP+, the recording mode will
automatically revert to MN32.
NICAM A+B
• You can also select the language for a
non-NICAM bilingual broadcast.
When recording to DVD+R/+RW, SLP is the
longest recording time available. If you
select SEP or MN1 to MN3, the recording
mode will automatically revert to SLP.
A (L)
B (R)
A + B (L+R)
• When watching a recording made from
an external input with Bilingual
recording selected (see External Audio
on page 110), you can switch the audio
channel between left (L), right (R) or both
(L+R).
REC MODE
•
Press repeatedly to select the
recording quality.
• XP – High quality setting, gives about
one hour of recording time on a DVD
disc.
• SP (Standard Play) – Default quality,
used for most applications, gives about
two hours of recording time on a DVD.
L
R
L+R
36
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
• LP (Long Play) – Lower video quality than
SP, but doubles the recording time on a
DVD to about four hours.
• If you want to record a VR mode DVD-R
or a Video mode DVD-RW, you must
initialize it before proceeding (see
Initializing recordable DVD discs on
page 49).
• EP (Extended Play) – Lower quality than
LP, but gives about six hours of
recording time on a DVD disc.
CH
• SLP (Super Long Play) – Lower quality
than EP, but gives about eight hours of
recording time on a DVD disc.
2
Select a TV channel to record.
The front panel display shows the channel
number:
• SEP (Super Extended Play) – Lowest
video quality but gives about ten hours of
recording time on a DVD disc.
ch
1
2
Channel number
• MN1 to MN32/LPCM /XP+ – Manual/
Linear PCM/XP+ (available only when
manual recording is on).
• While the recorder is stopped, you can
also use the number buttons on the
remote to select the channel (e.g., for
channel 24, press 2, 4 then ENTER).
The setting is indicated in the front panel
display, and shown on-screen together with
the recording time for a blank recordable
disc. If a recordable disc is loaded, the
approximate remaining recording time for
that disc is also shown. (Note that if the On
Screen Display setting (see On Screen
Display on page 118) is Off then this
information is not displayed.)
• If the recorder is stopped, you can also
use the CH +/– buttons on the front
panel to select the channel number.
REC MODE
3
Set the picture quality/recording
time.
• See Setting the picture quality/recording
time on page 36 for detailed instructions.
Basic recording from the TV
AUDIO
4
Select the audio channel to
DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD
record.
See Changing audio channels on page 35 for
more on this.
Basic recording from the TV involves just
setting the channel to record, choosing
whether to record to the HDD or a DVD and
selecting the recording quality.
Taiwan and Philippines model:
• When recording in VR mode (DVD) or
with HDD Recording Format set to Video
Mode Off (HDD), both mono and SAP
audio channels are recorded, allowing
you to switch the audio channel on
playback. The only exception to this is
when the picture quality is set to LPCM,
in which case you do need to select the
audio channel before recording.
HDD
DVD
1
Select the HDD or
DVD for recording.
• If you’re recording to DVD, load a
recordable disc (if you load a new blank
DVD-RW or DVD+RW disc, the recorder
takes a short while to initialize the disc).
Note
1 • Taiwan and Philippines model: Audio is recorded in 16-bit Linear PCM format, video is recorded at XP quality.
When recording a broadcast with a SAP channel, select which audio channel to record (see Dual Mono
Recording on page 111).
• Other: Audio is recorded in 16-bit Linear PCM format, video is recorded at XP quality. When recording a
bilingual broadcast, select which audio channel to record (see Bilingual Recording on page 111).
2 Applicable only to HDD recording. (If this setting is used when recording to DVD, MN32 is used.) When copied
to DVD, XP+ recordings are always copied in real time.
37
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
Other:
Setting a timer recording
• When recording in VR mode, if a
broadcast is bilingual, both audio
channels are recorded, allowing you to
switch the audio channel on playback.
The only exception to this is when the
picture quality is set to LPCM, in which
case you do need to select the audio
channel before recording.
DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD
Using the timer recording features you can
program up to 32 timer recordings up to a
month in advance. Timer recording
programmes can be set to record just once,
every day, or every week.
There are three ways to set a timer recording;
using the Easy Timer Recording feature (see
Easy Timer Recording on page 39), using the
G-Code programming system (see Timer
recording using the G-Code™ programming
system on page 40), or using manual timer
recording (see Setting a manual timer
recording on page 42).
REC
5
Start recording.
If you want to set a recording end time, press
the REC button repeatedly. The recording
time increases in 30 minute increments, up
to a maximum of six hours. The time the
recording will end is shown on-screen and in
the front panel display. When the recording
ends, the recorder automatically switches
into standby if no other operation is being
performed.
You can set the recording quality for your
timer recording in the same way as for a
regular recording, but with the added option
of an AUTO mode, which maximizes the
recording quality for the space available on
the disc (if recording to DVD), or to fit on to a
blank DVD disc (if recording to the HDD).
• To cancel the set recording time, press
REC.
• If you want to pause recording at any
time , press PAUSE. Press again to
restart the recording (If recording to the
HDD, DVD-RAM or in VR mode, a new
chapter is started after recording
restarts).
1
You can set timer recordings to record to a
recordable DVD or to the hard disk drive. For
regular (daily or weekly) HDD timer
recordings that you don’t need to keep, you
can use the Auto Replace Recording feature
to automatically replace the previous timer
recording with the new one. Note that when
you use this feature, the previous recording
made on that timer programme will be
replaced by the next one, regardless of
whether you have watched it yet or not.
STOP REC
6
Press to stop recording.
• If you set the recording time in the
previous step, you can still stop the
recording anytime by pressing F STOP
REC.
You can also set the recorder so that it will
adjust the recording quality to try and fit the
recording on to the disc if it would not
otherwise fit at the recording quality you set
(see Optimized Rec on page 114 for more on
this).
• Recording will stop automatically when
there is no more space on the HDD/DVD,
or after 12 hours of HDD recording
(whichever is sooner).
Finally, if you set a timer recording to record
to DVD but there isn’t a recordable DVD
loaded at the time of the recording, the
Recovery Recording feature will
automatically record the programme to the
HDD for you.
Note
38
En
1 Except during Chase Play.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
HOME
MENU
Important
1
Select ‘Timer Recording’, then
• A timer recording can’t be set if there are
already 32 timer programmes waiting to
be recorded.
‘Easy Timer’ from the Home Menu.
PREV
NEXT
2
Set the TV channel to
• Timer recording will not start if:
– The recorder is already recording.
– A disc is being initialized, finalized or
unfinalized.
record.
Easy Timer Recording
AM
PM
12:00
8:00
9:00
10:00
11:00
1:00
2:00
1/01
1/02
1/03
• Timer recording will start when the operation
preventing timer recording has finished.
• When the front panel display is set to ON,
1/01
MON
9:30
AM
SP
– ––:––
the timer indicator ( ) lights in the front
panel display when the timer is active. If
the indicator is blinking it means that (for
a DVD timer recording) there is no disc
loaded, or the disc loaded is not
recordable (for an HDD timer recording it
means that the HDD is not recordable).
• Approximately two minutes before a
timer recording is set to start, the
recorder will go into timer recording
standby. In timer recording standby you
cannot use some functions.
• The maximum length for timer
recordings made to the HDD is 24 hours.
However, because one title (HDD) is
limited to 12 hours, recordings over
12 hours will be spread over two titles.
Note that there will be a break in the
recording of a few seconds between
titles.
REC MODE
HDD/DVD
7ch
HDD
REC MODE
3
Set the recording quality.
• DVD recording: The AUTO option
automatically sets the best recording
quality for the space available on the disc
loaded at the time of recording.
• HDD recording: The AUTO option
automatically sets the best recording
quality that would fit on to a blank DVD
disc.
HDD
DVD
4
DVD for recording.
Select the HDD or
5
Move the cursor to the
recording start date and time on the grid.
• You can move the cursor forward or back
an hour at a time using the
• When a scheduled recording finishes,
this unit’s power is not turned off if the
power for the plasma television is on. If
you want this unit’s power to turn off
after a timer recording finishes, set the
HDMI Control to Off (page 117).
REV SCAN and FWD SCAN
buttons.
Current time
Recording start time
Easy Timer Recording
Easy Timer Recording
AM
8:00
PM
12:00
As the name suggests, Easy Timer
Recording makes setting up a timer
recording as simple as possible.
9:00
10:00
11:00
1:00
2:00
1/01
1/02
1/03
1/01
MON
11:45
AM
SP
– ––:––
Important
REC MODE
HDD/DVD
7ch
HDD
• Unless otherwise stated, the OSDs
shown in this manual are for the Taiwan
and Philippines model.
39
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
Each row of the grid is one day (you can set
the timer recording for up to a month in
advance). Each column is a 15 minute
interval.
Timer recording using the G-Code™
programming system
This system makes programming timer
recordings very simple. Most TV guides
publish G-Code programming numbers with
their programme details. If you want to make
a timer recording of a programme, you just
input the corresponding code. The date,
start, stop and channel settings are made
automatically. All you have to do is tell the
recorder the recording mode, and whether
it’s a once-only recording or a regular
recording.
The darker area represents time that has
already passed and can’t therefore be
selected. The lighter area is time that’s
available.
ENTER
6
Set the start time.
The start date and time is displayed in the
middle of the screen.
• You can go back and reset the start time
Note that if the country setting is incorrect
(set in the Setup Navigator), timer
recordings made using the G-Code
programming system may not work as
expected.
if you need to by pressing RETURN.
7
Move the cursor to the
recording end time on the grid.
Recording start time
Recording end time
1
Press ‘G-Code’ to display the G-Code
programme screen.
You can also access this screen from the
Home Menu (press HOME MENU, select
Timer Recording, then G-Code system).
Easy Timer Recording
AM
11:00
PM
12:00
1:00
2:00
3:00
4:00
5:00
1/01
1/02
1/03
G-Code#
1/01
MON
11:45
AM
–
1:45
PM
REC MODE
HDD/DVD
7ch
SP
HDD
1
4
7
0
2
5
8
3
6
9
As you move the cursor around the grid, an
arrow stretches from the start time to the
current cursor position, representing the
length of the recording. A recording of up to
six hours can be set.
Cancel
Details
Enter
Clear
• Use the number buttons to enter the
G-Code programming number. (To clear
the last digit entered, press CLEAR.)
ENTER
8
Set the end time.
• You can also use the ///
buttons to select digits from the on-
screen display.
9
Select ‘Yes’ to set the timer
recording and exit, or ‘No’ to go back to
the Easy Timer Recording screen.
• You can check the timer recording
details you just set from the main timer
recording screen (see Setting a manual
timer recording on page 42).
2
After making the settings, select
‘Enter’ and press ENTER.
The timer recording screen appears with the
timer programme you just set.
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
3
Confirm that the settings are correct.
G-Code programming with the
power off
You can enter a G-Code programming
number when the recorder is in standby.
If the channel number isn’t displayed, use
the / buttons to highlight CH, then use
the / buttons to set the correct channel
number.
Note that the recording is always made to
the HDD. If you want to record to a DVD disc,
you’ll need to switch on the power and use
the full G-Code programme screen.
• If the channel number is set, but
incorrectly, set up the guide channel
(see G-Code CH Setting on page 109).
4
Select ‘Store Programme’ to finish.
• Other options in the same menu panel
allow you to name the programme, and
change the recording destination and/or
recording mode.
Important
• You can’t use this feature until you have
set up the guide channels, see G-Code
CH Setting on page 109.
• You can’t change the recording mode.
Checking/editing timer recording
settings
You can check and/or edit the timer
recording settings made by the G-Code
system by selecting Details from the
G-Code# setting screen.
• You can’t program daily or weekly timer
recordings.
1
Press ‘G-Code’.
The front panel display shows the current
recording mode and prompts you to enter
the G-Code programming number.
ENTER
1
Select ‘Details’ from the
G-Code# setting screen.
The Timer Programme Set screen appears,
filled out with the timer recording details.
2
Use the number buttons to enter the
number.
2
Check and edit the fields as
necessary.
See Setting a manual timer recording on
page 42 for more on this.
• To clear the last digit entered, press
CLEAR.
3
Press ENTER.
ENTER
The display shows the timer settings:
3
Select ‘Store Programme’ to
save the timer programme and exit.
Date Start time End time HDD and
Recording channel Recording mode
• If CODE ERROR appears in the display,
check that the number is correct and
that the guide channel is set (see G-Code
CH Setting on page 109), then set the
timer recording again.
• If CAN’T SET appears in the display, it
means that although you entered a valid
number, the programme has already
finished.
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
2
Select ‘New Input’ to set a new timer
Setting a manual timer recording
The timer recording screen you can see all
the timer programmes already set, clear
programmes and set up new ones.
programme, then press ENTER.
Timer Programme Set
Manhattan Open Tennis
1
Press TIMER REC to display the Timer
CH
10ch
Date
EVERYDAY
Start
Stop
Extend
30 min
6:00PM
7:00PM
Recording screen.
Store Programme
You can also access the Timer Recording
screen from the Home Menu (press HOME
MENU, select Timer Recording, then Timer
Recording).
Detailed Settings
Record To
Recording Mode
Auto Replace Rec.
Genre
Enter Details
HDD
XP
On
No Category
L
Set Detailed
Set Title Name
Cancel
Dual Mono Recording
HDD Recording Format Video Mode On
This screen shows all the timer programmes
currently set.
3
Enter the timer recording settings.
Use the / buttons to select a field; use
Timer Programme View
3/26 SUN 3:00PM
Tmr Pgms 3/32
OK
the / buttons to change the value.
Manhattan Open Tennis
3/26 SUN 6:00PM
World Journey
–
7:00PM
9:00PM
10ch
4ch
OK
• CH – Choose a channel (2 to 69 for
antenna channels; 1 to 125 for cable/Pr1
to Pr 99, excluding skip channels), or one
of the external inputs from which to
record.
3/27 MON 7:30PM
–
Flower
Until 4/20
MON
–
FRI 1:30PM
–
2:00PM
8ch
New Input
• Date – Choose a date up to one month in
advance, or select a daily or weekly
programme.
HDD Remain
DVD Remain
59h59m(SP)
1h59m(SP)
• Each row is for one timer recording
programme, with the date and time
information, channel, recording mode,
DVD or HDD and recording status.
• Start – Set the recording start time.
• Stop – Set the recording end time
(maximum length of a timer recording is
24 hours).
• The amount of free space available on
the HDD and the currently loaded
recordable DVD is shown towards the
bottom of the screen.
• Extend – Extend the end time of the
timer recording (select Off, 30, 60, 90 or
120 mins).
• In the upper-right corner, the number of
timer programmes already set is shown
next to Tmr Pgms.
4
If you want to change the recording
mode, recording destination, etc., select
‘Set Detailed’.
In this area you can set:
• If there are more than five timer
programmes already set, press
NEXT to switch page (go back using
the PREV button).
Record to – Select HDD for hard disk
recording or DVD for DVD recording. Select
HDD for Auto Replace Recording (daily or
weekly timer recording only).
• You can also delete a timer programme
before it’s started (before the recorder
enters timer recording standby) by
highlighting it and pressing CLEAR. See
also Deleting a timer programme on
page 44.
Recording Mode – Select XP, SP, LP, EP,
SLP or SEP, (See Setting the picture quality/
recording time on page 36). If Manual
Recording is on, then you can also select the
LPCM setting, XP+ or MN (press ENTER
then use the / buttons to select the
level).
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
Auto Replace Rec. – Automatically erases
the previous daily or weekly recording when
the next one is recorded.
• Standby – The recorder is in timer
recording standby.
• nothing displayed – Another timer
recording or copying is in progress.
Genre – Select a record genre (for HDD
recording only).
6
To exit the timer recording screen,
Dual Mono/Bilingual Recording – Select
which channel of a dual mono/bilingual
broadcast to record (necessary if recording
to a Video mode DVD or to the HDD with the
HDD Recording Format set to Video Mode
On).
press HOME MENU.
Tip
• To enter a title name for the timer
recording in advance, select Set Title
Name and follow the on-screen display.
HDD Recording Format – Select Video
Mode On or Video Mode Off depending on
whether you need high-speed copying to
Video mode DVD capability or not.
Note
• If you set a DVD timer recording but
there is no recordable DVD disc loaded,
or the disc loaded doesn’t have enough
free space for the complete recording,
Recovery is shown. In this case (unless
you load a suitable disc before the
recording actually starts), the recorder
will use the HDD for recording. (The
message Can’t Rec will appear if there
are already 999 titles on the HDD or if
there is not enough free space on the
HDD for recording.)
5
After entering all the timer recording
information, highlight ‘Store
Programme’ and press ENTER.
The timer recording list screen is displayed
again. The timer programme you just input
appears in the list. The rightmost column
shows various timer recording status
messages:
• OK – Can be recorded.
• Time Over – Not enough space on the
HDD (the recording won’t finish).
• Over 12h – Recording time of over
12 hours set (when recording to the HDD
the recording will be split into two titles).
• For a DVD timer recording, if Optimized
Rec (see Optimized Rec on page 114) is
set to On, the recorder will adjust the
recording quality to try and fit the
recording on the disc. If the recording
will not fit onto the disc even on MN1
(MN4 for DVD+R/+RW) recording
quality then the Recovery Recording
feature will automatically make the
recording to the HDD instead.
• Overlap – Two timer programmes
partially or completely overlap. The one
starting earlier will take priority.
• Until ... (eg., Until 8/13) – For a regular
recording, the last programme that
could be recorded is shown.
• Data Over – Can’t record because the
disc management area of the disc is full.
• If there is very little free space left on the
HDD, an Auto Replace Recording may
not complete successfully.
• Cancel Once – A regular timer
programme is set to skip.
• If the HDD is being used for playback or
high-speed copying when an Auto
Replace Recording is due to start, the
new timer recording will not replace the
old one. However, the next time the timer
recording starts, both of the older two
programmes will be erased.
• Can’t Rec – Not possible to record.
• Title Over – Can’t record because there
is already the maximum number of titles
on the disc (HDD: 999; DVD: 99).
• Recording – The programme is currently
recording.
43
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
3
Press then select ‘Cancel Once’
Editing a timer programme
You can change any of the settings in a timer
programme before the recording is due to
start.
from the command menu panel.
• In the timer programme list, Cancel
Once appears by the programme.
• You can also just press PAUSE when
the timer programme is highlighted.
1
Press TIMER REC.
2
Highlight the timer programme you
want to change.
Extending a timer recording in
progress
You can extend a timer recording beyond the
programmed end time in two different ways.
This can be useful if a broadcast programme
overruns, for example.
3
Press then select ‘Modify’ from the
command menu panel.
Alternatively, press ENTER.
The Timer Programme Set screen appears
from which you can edit the settings.
4
Edit the timer recording settings as
Cancelling or extending the timer
necessary.
REC
5
Select ‘Store Programme’ to finish.
1
Press and hold for three seconds
Confirm the settings you made from the
following screen.
during a timer recording.
Recording continues, but the timer indicator
disappears from the front panel display
indicating that the timer has been cancelled.
Deleting a timer programme
You can delete timer programmes you no
longer need.
REC
2
Press repeatedly to extend
1
Press TIMER REC.
recording in 30 minute blocks.
2
Highlight the timer programme you
Programming a new end time
You can edit the end time of a timer
recording you have previously set.
want to erase.
3
Press then select ‘Erase’ from the
command menu panel.
1
Press TIMER REC.
• Select Yes to confirm or No to cancel.
• You can also just press CLEAR when the
timer programme is highlighted.
2
Highlight the timer recording
you want to change.
Skipping a regular timer
programme
ENTER
If you’ve set a regular daily or weekly timer
programme, you can set the recorder to skip
the next scheduled recording.
3
Press then select ‘Modify’
from the command menu panel.
Alternatively, press ENTER.
1
Press TIMER REC.
The Timer Programme Set screen appears,
from which you can edit the settings.
2
Highlight the timer programme you
want to skip.
ENTER
4
Edit the end time as necessary.
You can also edit the Extend time parameter.
44
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
Timer recording FAQ
Frequently Asked Questions
ENTER
5
6
Select ‘Store Programme’.
HOME
MENU
• Even though the timer is set, the recorder
doesn’t start recording!
Press to exit the Timer Recording
screen.
Check that the disc loaded or HDD is
recordable, not locked (see Lock Disc on
page 102), and that there are fewer than
99/999 titles already on the DVD/HDD.
Stopping a timer recording
STOP REC
• The recorder won’t let me enter a timer
programme! Why not?
1
2
Press during a timer recording.
Select ‘Yes’ to confirm.
ENTER
You can’t enter a timer programme if the
clock isn’t set.
• What happens when two or more timer
programmes overlap?
Preventing use of the recorder
before a timer recording (child
Basically, the programme with the earlier
recording start time has priority.
However, the recorder will start
lock)
You can make all the front panel and remote
control buttons inoperative using the child
lock feature. This is useful when you set a
timer recording and want to make sure that
the timer settings are not changed before
recording has finished.
recording the programme with the later
start time after the earlier programme is
finished. If schedule to record two
programmes have the same times (but
different channels, for example), then
only one of the two programmes will be
recorded. In this event you should cancel
the scheduled recording of the lesser
important programme. If one of the
overlapping programmes is a regular
timer programme, you may choose
‘Cancel Once’ in order to avoid having it
overlap with a separately scheduled
programme (see Skipping a regular timer
programme on page 44).
STANDBY/ON
ꢀ
1
If the recorder is on, switch it
into standby.
2
[Front panel] Press and hold for
three seconds to lock the controls.
The front panel display briefly shows
LOCKED. If any buttons are pressed on the
remote or front panel, LOCKED is briefly
displayed again.
• To unlock the recorder, press and hold
(Stop) on the front panel (while the
recorder is stopped) for three seconds
until the display shows UNLOCKED.
• Even if you make child lock settings, this
unit can still be controlled by the remote
of a connected plasma television. If you
do not want this unit to be able to be
controlled by another component when
you have set a child lock, turn this unit’s
HDMI Control to OFF (page 117).
45
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
• During recording or in timer recording
standby, you can’t play an HDD title,
DVD or Video CD/Super VCD disc if the
Input Line System setting doesn’t match
the TV line system of the disc/HDD title
(see also Additional information about
the TV system settings on page 119).
Also, during simultaneous recording
and playback, if the TV line system of the
playback track/title changes then
Simultaneous recording and
playback (Chase Play)
HDD
Chase Play allows you to watch a recording
that is still in progress from the start, without
having to wait until the recording has finished
(i.e., playback is ‘chasing’ the recording).
In fact, you’re not just limited to watching
the recording in progress. You can watch
anything else already on the HDD (or on a
DVD if you’re recording to the HDD) by
selecting it from the Disc Navigator screen
(see Using the Disc Navigator with recordable
discs and the HDD on page 55).
playback will automatically stop.
Recording from an external
component
DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM HDD
Chase Play is not possible when DV is the
recording input.
You can record from an external component,
such as a camcorder or VCR, connected to
one of the recorder’s external inputs.
Important
1
Make sure that the component you
• You can’t use this feature during Auto
Start Recording, or in Auto Start
Recording standby (the AUTO indicator
is lit in the front panel display).
want to record from is connected
properly to the HDD/DVD recorder.
See Chapter 2 (Connecting up) for
connection options.
INPUT
SELECT
PLAY
2
Press repeatedly to select one of
•
Press during recording to
the external inputs to record from.
There are three analog inputs. The current
input is shown on-screen and in the front
panel display:
start playback from the beginning of the
current recording .
1
DISC NAVIGATOR
•
Press during recording to
• L1 – INPUT 1/AUTO START REC
• L2 – INPUT 2 (front panel)
• L3 – INPUT 3
select another title to play.
You can use all the usual playback controls,
such as pause, slow-motion play, scan and
skip.
Check that the Audio In settings for
External Audio, and Dual Mono
Recording/Bilingual Recording are as you
want them (see Audio In on page 110).
• To stop playback, press STOP
(recording will continue).
• To stop recording, press F STOP REC
(playback will continue).
• If the aspect ratio is distorted (squashed
or stretched), adjust on the source
component or your TV before recording.
Note
1 You can’t start playback immediately after recording starts. Simultaneous playback and recording doesn’t work
while copying or backing up.
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
• To watch video coming in via the DV
input (front panel), select DV > DV
Video Playback from the Home Menu
(see also Playing from a DV camcorder on
page 64).
• If Auto Start Recording is set, it will not
start if another timer recording is in
progress.
• Timer recordings take precedence over
Auto Start Recording. Auto Start
Recording will stop if a timer recording is
due to start. After the timer recording
has finished, Auto Start Recording will
resume.
REC MODE
3
4
Set the recording quality.
• See Setting the picture quality/recording
time on page 36 for detailed information.
• Turn the HDMI Control setting to Off
when using Auto Start Recording
(page 117).
HDD
DVD
Select the HDD or
DVD for recording.
REC
5
Press to start recording.
1
Set the timer for the satellite receiver
• If your source is copy-protected using
Copy Guard, you will not be able to
record it. See Restrictions on video
recording on page 34 for more details.
(or other component), then switch it into
standby (if necessary).
Check the manual that came with the
receiver if you’re not sure how to do this.
2
Check that the ‘Audio In’ settings for
‘External Audio’ and ‘Dual Mono
Recording/Bilingual Recording’ are as
you want them.
See Audio In on page 110 for more on these
settings.
Automatic recording from a
satellite tuner
HDD
3
Set up the recorder.
If you have a satellite tuner or some other
kind of set top box connected to the INPUT
1/AUTO START REC input, you can have the
recorder start and stop recording
automatically with the timer settings of the
connected component. (If the other
• Use REC MODE to set the recording
quality. See Setting the picture quality/
recording time on page 36 for detailed
information.
4
Press HOME MENU and select ‘Timer
component doesn’t have a built-in timer,
you’ll need to use it with an external timer
unit.)
Recording’, then ‘Auto Start Recording’.
1
5
Select ‘Yes’ to switch Auto Start
Recording on, or ‘No’ to switch off.
If you choose ‘Yes’ the recorder
automatically goes into standby.
After setting up for Auto Start Recording, this
recorder starts recording when it detects a
signal from the other component. When the
signal ceases, the recorder stops recording.
The AUTO indicator in the front panel
display lights.
The recorder will automatically switch on
and start recording when the other
Important
component comes on. Recording stops
when the external component switches off.
• It takes a little while for this recorder to
switch on and start recording after
detecting a signal. Please bear this in
mind when setting the timer.
Note
1 You can’t set Auto Start Recording when:
– the recorder is recording or in timer recording standby.
– the HDD is not recordable.
47
En
– the HDD already contains the maximum number of titles (999).
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
• To cancel Auto Start Recording, press
STANDBY/ON while the recorder is in
standby. The AUTO indicator goes off.
When you finalize a DVD-R/-RW (Video
mode) or DVD+R disc, a title menu is
created from which you can select titles
when you play the disc. There are a number
of different styles of title menu to choose
from to suit the content of the disc.
• To cancel Auto Start Recording once
recording has already started, press
REC for three seconds (this cancels
Auto Start Recording, but recording
continues), then F STOP REC to stop
recording.
All the title menus are navigated in the usual
way, pressing MENU or TOP MENU to
display the menu, then using the ///
followed by ENTER to select titles and start
playback.
• You can also stop recording by pressing
F STOP REC then selecting Yes to
confirm.
Finalizing a disc
DVD (VR) DVD (Video) DVD+R DVD+RW
Tip
• Alternatively, with no OSD displayed,
press and hold the front panel F STOP
REC button for more than three seconds
to switch Auto Start Recording on
directly. After switching on, switch the
recorder into standby.
Finalizing ‘fixes’ the recordings on the disc
so that it can be played on a regular DVD
player or computer equipped with a suitable
1
DVD-ROM drive.
Note that the disc name will appear in the
title menu after you finalize a disc. Make sure
the disc name is as you want it before you
finalize the disc as it can’t be changed
afterwards. If you want to rename the disc,
see Input Disc Name on page 102 before
starting the steps below.
When using the Video Control function of an
external component, set the HDMI Control
to Off (page 117).
Playing your recordings on
other DVD players
DVD+RW discs don’t generally need
finalizing. However, if you want a title menu
to appear when you play the disc, then you
will need to finalize. When using a
DVD (VR) DVD (Video) DVD+R DVD+RW
DVD+RW, you can still record and edit even
after finalizing. although the title menu will
disappear if you do so. Finalize the disc
again to generate a new title menu.
Most regular DVD players can play finalized
discs recorded in DVD-R/-RW (Video mode)
and DVD+R discs. A number of players
(including many Pioneer models) can also
play DVD-RW discs recorded in VR mode,
finalized or not. Most players will not play VR
mode DVD-R discs, although some
DVD-ROM drives and DVD recorders may be
able to (finalization might be necessary).
Check the manual that came with the player
to check what kinds of discs it will play.
Important
• Once you’ve finalized a DVD-R/-RW
(Video mode) or DVD+R disc, you can’t
edit or record anything else on that disc.
However, the finalization on a DVD-RW
disc maybe ‘undone’; see Undo Finalize
on page 103 for how to do this.
Note
1 If the TV line system of the disc is different to the current setting of the recorder, you will not be able to finalize
the disc. See Additional information about the TV system settings on page 119 for how to change the recorder’s
setting.
48
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
• A VR mode DVD-R/-RW (excluding
DVD-R DL) disc can still be recorded and
edited on this recorder even after
finalizing.
• Discs recorded partially or fully on the
Pioneer DVR-7000 DVD recorder do not
support this feature. These discs will
have only a text title menu when finalized
on this recorder.
• DVD-R DL (Video mode) discs and
DVD+R DL discs must be finalized in
order to play in other recorders/players.
Note however that some recorders/
players will not play even finalized dual-
layer discs.
5
The recorder will now start finalizing
the disc.
During finalization:
• If the finalization process of a DVD-RW
or DVD+R/+RW disc is going to take
more than around four minutes, you can
press ENTER to cancel. Around four
minutes before completion, the option to
cancel disappears.
1
Load the disc you want to finalize.
Make sure that the recorder is stopped
before proceeding.
HOME
MENU
• You can’t cancel the finalization of a VR
mode DVD-R disc.
2
Select ‘Disc Setup’ from the
Home Menu.
• How long finalization takes depends on
the type of disc, how much is recorded
on the disc and the number of titles on
the disc. A disc recorded in VR mode can
take up to one hour to finalize. DVD-R/
-RW (Video mode) and DVD+R/+RW
discs can take up to 20 minutes.
ENTER
3
Select ‘Finalize’ > ‘Finalize’ >
‘Next Screen’.
Disc Setup
Next Screen
Start
Basic
Finalize
Undo Finalize
Initialize
Finalize
Optimize HDD
Initializing recordable DVD
discs
DVD-R DVD-RW
DVD+RW DVD-RAM
ENTER
DVD-R/-RW discs can be initialized for either
Video mode recording or VR mode
recording.
4
For DVD-R/-RW (Video mode)
1
and DVD+R/+RW discs only, select a title
menu style, then select ‘Yes’ to start
finalization or ‘No’ to cancel.
The menu you select will be the one that
appears when the ‘top menu’ (or ‘menu’ for a
DVD+R/+RW) is selected on any DVD player.
When you first load a blank DVD-RW or
DVD+RW disc, the recorder initializes it for
recording automatically. By default, blank
DVD-RW discs are initialized for VR mode
recording. See DVD-RW Auto Initialize on
page 50 if you want to change the default to
Video mode.
Finalize
DVD-R discs are ready for Video mode
recordings out of the box; if you want to use
a DVD-R for VR mode recording, you must
initialize it before recording anything on the
disc.
Note
1 If a disc was previously finalized on an older DVD recorder, you may not be able to re-initialize and/or initialize it
for Video mode recording.
49
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
05
DVD+RW and DVD-RAM discs can also be
initialized in order to erase the contents of
the disc.
DVD-RW Auto Initialize
DVD-RW
Important
• Default setting: VR Mode
• Initializing a DVD-RW, DVD+RW or
DVD-RAM disc will erase everything
recorded on it. Make sure there is
nothing on the disc that you want to
keep!
Initialization mode is automatically carried
out when you insert a blank DVD-RW. You
must set the desired initialization mode
before inserting a disc.
HOME
MENU
• You may not be able to re-initialize a
DVD-RW disc in a different format if it
was originally initialized on an older DVD
recorder.
1
Select ‘Disc Setup’ from the
Home Menu.
ENTER
• Once initialized for VR mode recording,
you can’t re-initialize a DVD-R back to
Video mode.
2
Select ‘Basic’>’DVD-RW Auto
Init.’, then ‘VR Mode’ or ‘Video Mode’.
HOME
MENU
Disc Setup
VR Mode
Basic
Input Disc Name
Lock Disc
1
Select ‘Disc Setup’ from the
Video Mode
Initialize
Finalize
DVD-RW Auto Init.
Home Menu.
Optimize HDD
ENTER
2
Select ‘Initialize’ > ‘Video
Mode’, ‘VR Mode’ or ‘Initialize DVD+RW’.
Disc Setup
Start
Start
Start
Basic
VR Mode
Initialize
Finalize
Video Mode
Initialize DVD+RW
Optimize HDD
ENTER
3
Select ‘Start’.
It takes about 30 seconds to initialize the
disc (except DVD-RAM discs, which can take
up to an hour).
Initializing Disc
2ch
1 min left
50
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
06
Chapter 6
Playback
Introduction
• Some DVD-Video, DVD+R and
DVD+RW discs don’t allow certain
playback controls to operate at certain
points in the disc. This is not a
malfunction.
Most of the features described in this
chapter make use of on-screen displays.
Navigate these using the cursor buttons and
ENTER. To go back one level from any
screen, use the RETURN button.
HDD
DVD
1
Select the HDD or
DVD for playback.
If playing video from the HDD, skip to step 3
below.
Remember also that the button guide at the
bottom of every screen shows which buttons
do what.
Select DVD for any kind of disc playback.
Many of the functions covered in this
chapter apply to the HDD, DVD discs, Video
CDs, Super VCDs, WMA/MP3/DivX discs
and CDs, although the exact operation of
some varies slightly with the kind of disc
loaded.
OPEN/CLOSE
2
Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc (if
you’re loading a double-sided DVD-Video
disc, load it with the side you want to play
face down).
• Many functions are not available when a
Video CD is playing in PBC mode. Start
playback from the Disc Navigator screen
for non-PBC playback (see Using the
Disc Navigator with playback-only discs
on page 56).
• If you want to play a DTS Audio CD,
please first read the note on page 53.
PLAY
3
Start playback.
• For discs that contain JPEG picture files,
see The PhotoViewer on page 94.
• If you’re playing a DVD-Video or Video
CD, a disc menu may appear when you
start playback. Use the ///
buttons, number buttons, and ENTER to
navigate DVD disc menus, and the
number buttons and ENTER for Video
CD menus.
Important
• Unless otherwise stated, the OSDs
shown in this manual are for the Taiwan
and Philippines model.
• The Disc Navigator is automatically
displayed for WMA/MP3 files and Audio
CDs (see Using the Disc Navigator with
playback-only discs on page 56).
Basic playback
ALL
• When playing video from the HDD,
playback will automatically stop after the
end of a title is reached.
This section shows you how to use your
recorder for playback of discs (DVD, CD,
etc.), and for playback of video from the HDD.
• There may be a slight pause when
playback switches from the first to the
second layer of a dual-layer disc.
Important
• See the following sections for more
details on playing specific kinds of discs.
• Throughout this manual, the term ‘DVD’
means any kind of playable or recordable
DVD. If a function is specific to a
particular kind of DVD disc, it is specified.
51
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
06
STOP
(Commercial back/skip) Each
press skips backward/forward
progressively up to a maximum
of two hours in either direction.
BACK CM SKIP
4
5
Press to stop playback.
When you’ve finished using the
recorder, eject the disc and switch the
recorder back into standby.
Press to start slow-motion
playback. Press repeatedly to
change the playback speed.
While paused, press to advance
a single frame in either
direction.
STEP/SLOW
Playing DVD discs
The table below shows the basic playback
controls for DVD-Video, and recordable DVD
discs.
Press to start playback.
PLAY
Press to display the menu of a
DVD-Video disc. (DVD+R/+RW
discs finalized on this recorder
will display the Disc Navigator.
Press MENU to display the disc
menu.)
MENU
DISC NAVIGATOR
If RESUME is displayed on-
screen, playback starts from the
place last stopped.
TOP MENU
Press to stop playback.
You can resume playback from
the same point by pressing
PLAY. (Press STOP again
to cancel the resume function.)
STOP
Use the cursor buttons to
navigate DVD-Video disc
menus; press ENTER to select
items.
ENTER
Pauses playback, or restarts
PAUSE
playback when paused.
RETURN
Press to return to the previous
level of a DVD-Video disc menu.
Press to start scanning. Press
REV SCAN FWD SCAN
repeatedly to increase the
scanning speed.
Playing from the HDD
The table below shows the basic playback
controls when playing video recorded on the
hard disk (HDD).
Press to skip to previous/next
PREV
NEXT
chapter/title. (During playback
you can also use the front panel
CH +/– buttons.)
DVD+R/DVD+RW only:
PREV may not always skip
to the previous title.
Press to start playback.
PLAY
If RESUME is displayed on-
screen, playback starts from the
place last stopped. Playback
automatically stops after the
end of a title is reached.
ABC
JKL
DEF
MNO
WXYZ
Except VR mode: During
playback, enter a chapter
number then press ENTER to
skip directly to that chapter
within the currently playing title.
On some discs, you can also
use the number buttons to
select numbered items in the
disc menu.
GHI
PQRS
TUV
Press to stop playback.
STOP
CLEAR
You can resume playback from
the same point by pressing
PLAY. (Press STOP again
to cancel the resume function.)
CLEAR
ENTER
Pauses playback, or restarts
PAUSE
playback when paused.
VR mode only: During playback,
enter a title number then press
ENTER.
Press to start scanning. Press
REV SCAN FWD SCAN
repeatedly to increase the
scanning speed.
All: Press CLEAR to clear a
number entry and start again.
52
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
06
Press to skip to previous/next
chapter/title. (During playback
you can also use the front panel
CH +/– buttons.)
Press to start scanning. Press
again to increase the scanning
speed. (There are two scan
speeds; the current scan speed
is shown on-screen.)
REV SCAN FWD SCAN
PREV
NEXT
ABC
JKL
DEF
MNO
WXYZ
During playback, enter a title
number then press ENTER to
skip directly to that title.
GHI
Press to skip to previous/next
track.
PREV
NEXT
PQRS
TUV
Press CLEAR to clear a number
entry and start again.
CLEAR
CLEAR
Playing Video CD/Super VCDs
The table below shows the basic playback
controls for Video CD/Super VCDs.
ENTER
Some discs feature Playback Control (PBC
for short) menus. These discs show PBC in
the display when you load them and display
a menu on-screen from where you can select
(Commercial back/skip) Each
press skips backward/forward
progressively up to a maximum
of two hours in either direction.
BACK CM SKIP
2
what to watch.
Press to start slow-motion
playback. Press repeatedly to
change the playback speed.
While paused, press to advance
a single frame in either
direction.
STEP/SLOW
Press to start playback.
PLAY
Video CD only: If RESUME is
displayed on-screen, playback
starts from the place last
stopped.
Press to stop playback.
STOP
Video CD only: You can resume
playback from the same point
by pressing PLAY. (Press
STOP again to cancel the
resume function.)
Playing CDs and WMA/MP3 discs
The table below shows the basic playback
1
controls for Audio CDs , and WMA/MP3
files.
Press to start playback.
PLAY
Pauses playback, or restarts
PAUSE
playback when paused.
Press to stop playback.
Press to start scanning. Press
STOP
REV SCAN FWD SCAN
repeatedly to increase the
scanning speed.
Pauses playback, or restarts
playback when paused.
PAUSE
Press to skip to previous/next
track.
PREV
NEXT
When a PBC menu is displayed,
press to display the previous/
next page. (During playback
you can also use the front panel
CH +/– buttons.)
Note
1 If you want to play a DTS Audio CD, make sure the recorder is connected to a DTS-compatible amplifier/receiver
with a digital connection. Noise will be output through the analog outputs. Also make sure that STEREO is
selected using the
AUDIO button (see Switching audio channels on page 61).
2 When playing in PBC mode, some playback features, such as search, repeat and programme play are not
available. You can play a PBC Video CD/Super VCD in non-PBC mode by starting playback using the Disc
Navigator (see Using the Disc Navigator with playback-only discs on page 56).
53
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
06
Playing DivX video files
The table below shows the basic playback
controls for DivX video files.
ABC
JKL
DEF
MNO
WXYZ
During playback, enter a track
number then press ENTER to
skip directly to that track.
Press CLEAR to clear a number
entry and start again.
While a PBC menu screen is
displayed, use to select
numbered menu items.
GHI
PQRS
TUV
CLEAR
Press to start playback.
PLAY
CLEAR
If RESUME is displayed on-
screen, playback starts from the
place last stopped. Playback of
titles (DivX files) proceeds in
alphabetical order.
ENTER
(Commercial back/skip) Each
press skips backward/forward
progressively up to a maximum
of two hours in either direction.
Note that this function doesn’t
work when playing in PBC
mode.
BACK CM SKIP
Press to stop playback.
STOP
You can resume playback from
the same point by pressing
PLAY. (Press STOP again
to cancel the resume function.)
Pauses playback, or restarts
playback when paused.
PAUSE
Press to start slow-motion
playback. Press repeatedly to
change the playback speed
(forward only).
While paused, press to advance
a single frame (forward only).
STEP/SLOW
Press to start scanning. Press
repeatedly to increase the
scanning speed.
REV SCAN FWD SCAN
Press to skip to previous/next
PREV
NEXT
RETURN
Press to display the disc menu
of a Video CD/Super VCD
playing in PBC mode.
title. (During playback you can
also use the front panel CH +/–
buttons.)
Press to start slow motion
playback (press repeatedly to
change the slow motion play
speed).
STEP/SLOW
While paused, press to advance
one frame.
AUDIO
Press to display the playback
audio type; press repeatedly to
change the playback audio
type.
SUBTITLE
Press to display subtitle
information; press repeatedly to
change subtitles.
54
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
06
Changing the display style of the
Disc Navigator
Using the Disc Navigator with
recordable discs and the HDD
You can choose to display titles in the Disc
Navigator in various different ways, sorted
alphabetically, by recording date, by genre,
and so on. You can also choose whether to
display four or eight titles on the screen at
the same time.
DVD-R DVD-RW
DVD+R DVD+RW DVD-RAM HDD
You can use the Disc Navigator to browse
and edit video on recordable DVDs and the
HDD, and to view information on titles.
See also Editing on page 67 for more on
editing recordable discs.
1
Display the view options
HDD
DVD
panel.
1
Select the HDD or
DVD.
The view options panel
DISC NAVIGATOR
Disc Navigator (HDD)
2
Open the Disc Navigator.
10Titles
12/03 SUN 11:00PM 4ch SP
Style
4
12/03Sun 11:00PM 4ch SP
Titles
Disc Navigator (HDD)
10
2h00m(1.0G)
10Titles
Sort order
7
12/03 SUN 8:00PM 9ch SP
12/03 SUN 11:00PM 4ch SP
Recent first
12/03 Sun 8:00PM 9ch SP
2h00m(1.0G)
12/03 Sun 11:00PM 4ch SP
MENU
2h00m(1.0G)
4
Titles
Genre
12/02 SAT 10:00PM 7ch SP
12/02 Sat 10:00PM 7ch SP
9
8
7
12/03 SUN 8:00PM 9ch SP
12/03 Sun 8:00PM 9ch SP
All Genres
1h00m(1.0G)
Recent first
All Genres
MENU
2h00m(1.0G)
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
12/02 SAT 10:00PM 7ch SP
12/02 Sat 10:00PM 7ch SP
HDD
SP
1h00m(1.0G)
Remain
30h30m
1h00m(1.0G)
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
HDD
SP
1h00m(1.0G)
Remain
30h30m
ENTER
2
Choose ‘Style’, ‘Sort order’ or
• You can also access the Disc Navigator
from the Home Menu.
‘Genre’, then press ENTER to see the
available view options.
• Style – Select four or eight titles per
screen view
3
Browse the list of titles.
• Use the PREV/ NEXT buttons to
display the previous/next page of titles.
• Sort order – Sort by date (most recent
first), unwatched first, title name or
recording date (oldest first)
• To change the thumbnail picture
displayed for a title see Set Thumbnail on
page 72.
• Genre – Display all genres or just a
selected genre
• For HDD recordings, you should be able
to see a thumbnail title digest. If it
doesn’t display, set Set Preview to
Normal. See Set Preview on page 118.
ENTER
3
Choose a view option, then
press ENTER.
The title list display is updated according to
the new display preferences.
ENTER
4
Play the highlighted title.
• You can also select Play from the
command menu options.
55
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
06
• Proceed to step 4 when playing back an
Audio CD.
Using the Disc Navigator
with playback-only discs
Disc Navigator (DVD/CD)
Use the Disc Navigator to browse the
contents of a disc and start playback.
Track List
10 Tracks
1
2
3
4
5
6
7
8
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Track 08
CD
MENU
DVD-Video Video CD Super VCD
1
2
Select DVD.
DVD
Track 01
0.04.30 / 1.14.00
Track 03
Track Repeat
650MB
(None)
0.05.30
10.00.00
HDD
HOME
MENU
Remain
100.0
G
Stereo
3
Display the Home Menu.
ENTER
3
Select a folder that contains
ENTER
3
Select ‘Disc Navigator’.
the tracks or titles you want to play back.
Alternatively, for a Video CD or Super VCD,
you can press DISC NAVIGATOR, which
takes you straight to the Disc Navigator
screen.
ENTER
4
Select what you want to play.
Playback starts after you press ENTER.
• Use the SUBTITLE/ANGLE buttons to
display the previous/next page of folders/
tracks/titles.
ENTER
4
Select what you want to play.
Depending on the type of disc you have
loaded, the Disc Navigator looks slightly
different, but they are all navigated in the
same way.
• You can also select Play from the
command menu options.
• For discs that contain CD audio tracks
and WMA/MP3 tracks or DivX titles, you
can switch the playback area between
CD, WMA/MP3 and DivX. Playback
stops if you switch the playback area
during playback. See Changing the
display style of the Disc Navigator on
page 57.
The screen below shows a Video CD.
Navigate to the track/chapter/title that you
want to play.
Track01
Disc Navigator
Track (01-99)
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Track08
Total 0.50.50
Video CD
Reloading files from a WMA/MP3
disc
When this unit reloads a WMA/MP3 disc
with over 1000 files or over 100 folders, the
files and folders are displayed in the Disc
Navigator.
Playback starts after you press ENTER.
CD WMA/MP3 DivX
1
2
Select DVD.
DVD
1
Navigate to the last entry in
DISC NAVIGATOR
the folder list (‘Read next: ...’).
Open the Disc Navigator.
• The Disc Navigator is also accessible
from the Home Menu.
ENTER
2
Load the next batch of up to
999 files/99 folders from the disc.
56
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
06
It takes several minutes for files to be
reloaded.
1
ENTER
3
Choose a view option, then
press ENTER.
The title list display is updated according to
the new display preferences.
Changing the display style of the
Disc Navigator
You can display titles by data format or by
folder/track.
Scanning discs
ALL
1
Display the view options
panel.
You can scan discs at various speeds,
forwards or backwards.
2
The view options panel
REV SCAN FWD SCAN
Disc Navigator (DVD/CD)
Track List
1
During playback, start
10 Tracks
TRACK1
reverse or forward scanning.
• The scanning speed is shown on-screen.
Data Format
TRACK2
TRACK3
TRACK4
TRACK5
WMA/MP3
Display Mode
Track
REV SCAN FWD SCAN
MENU
TRACK6
2
Press repeatedly to change
TRACK7
TRACK8
the scanning speed.
TRACK1
HDD
There are four scanning speeds available
when playing HDD video, a DVD or a DivX
title. Reverse playback is also possible with
WMA 999MB
TRACK3
Track Repeat
0.05.30
Remain
100.0
G
Stereo
3
10.00.00
3
HDD and DVD-Video.
ENTER
2
Choose ‘Data Format’ or
There are two scanning speeds for other
types of disc.
‘Display Mode’, then press ENTER to see
the available view options.
• Data Format
PLAY
3
Resume normal playback.
CD – Displays tracks on an Audio CD.
WMA/MP3 – Displays WMA/MP3
folders or tracks.
Playing in slow motion
DivX – Displays DivX folders or titles.
DVD HDD Video CD Super VCD DivX
• Display Mode
You can play video at various slow motion
speeds. DVDs and video on the HDD can be
played in slow motion in either direction,
while Video CDs/Super VCDs and DivX titles
can only be played forwards in slow motion.
Folder – Switches to the folder display
for WMA/MP3 or DivX files.
Track – Switches to the track display for
WMA/MP3 files.
Title – Switches to the title display for
DivX files.
There is no sound when playing in slow
motion.
Note
1 You can press HOME MENU to exit the Disc Navigator screen while the recorder is reloading files.
2 • No subtitles are displayed when scanning DVDs and DivX titles.
• No sound is output when scanning from the HDD, DVDs and DivX, except on forward SCAN 1.
• Depending on the disc, normal playback may automatically resume when a new chapter is reached on a DVD
disc.
57
En
3 Reverse playback may not be smooth.
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
06
PLAY MODE
STEP/SLOW
•
Press
to display the Play Mode
1
Press to start slow motion
menu.
reverse or forward play.
Play Mode
STEP/SLOW
2
Press repeatedly to change
Time Search
Title Search
Chapter Search
Search Mode
A-B Repeat
Repeat
the slow motion speed.
The current playback speed is indicated on-
screen.
Programme
PLAY
3
Resume normal playback.
• You can also access the Play Mode
menu from the Home Menu (press
HOME MENU).
Frame advance/frame
reverse
• Select Play Mode from the command
menu for Audio CDs, WMA/MP3 files, or
2
DivX files by pressing in the Disc
DVD HDD Video CD Super VCD DivX
Navigator.
• To exit the Play Mode menu, press
HOME MENU or PLAY MODE.
You can advance or back up video on a DVD
disc or the HDD frame-by-frame.
1
With Video CDs/Super VCDs and DivX titles,
you can only use frame advance.
Search Mode
DVD HDD Video CD Super VCD DivX
PAUSE
1
2
Pause playback.
The Search Mode feature lets you start
playback from a specified point in a disc by
STEP/SLOW
3
Back up or advance one
time or by title/chapter/track number.
frame with each press.
PLAY
ENTER
3
Resume normal playback.
1
Select ‘Search Mode’ from the
Play Mode menu, then choose a search
option.
The available search options depend on the
type of disc.
The Play Mode menu
ALL
ABC
DEF
MNO
WXYZ
GHI
JKL
The Play Mode menu gives you access to
search functions, repeat and programme
play functions.
PQRS
TUV
CLEAR
2
Enter a title/chapter/track
CLEAR
number or a search time.
Play Mode
Time Search
Title Search
Chapter Search
Input Time
0.01.00
Search Mode
A-B Repeat
Repeat
Programme
Note
1 Depending on the disc, normal playback may automatically resume when a new chapter is reached.
2 For DivX files, select Play Mode in the Disc Navigator while playback is stopped and in the Home Menu during
playback respectively.
58
En
3 When using time search, playback may occasionally start slightly before or after the time you input.
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
06
Time Search (HDD, DVD): For example, for
25 minutes into the current title, press 2, 5,
0, 0. For 1 hour and 15 minutes and
• When playing a DVD-Video, DVD-R/-RW
(Video mode), DVD+R/+RW, or from
the HDD, the start and end points of the
loop must be in the same title.
20 seconds into the title, press 1, 1, 5, 2, 0.
• To resume normal playback, select Off
from the A-B Repeat menu, or press
CLEAR if no menu OSD (such as the Play
Mode menu) is displayed.
Time Search (Video CD): For example, for
2 minutes and 30 seconds into the current
track, press 2, 3, 0.
Title/Chapter/Track Search: For example, for
track 6, press 6.
Repeat play
ENTER
3
Start playback.
ALL
There are various repeat play options,
depending on the kind of disc loaded, or if
you’re using the HDD for playback. It’s also
possible to use repeat play together with
programme play to repeat the tracks/
chapters in the programme list (see
A-B Repeat
DVD HDD CD Video CD DivX
The A-B Repeat function allows you to
specify two points (A and B) within a track or
title that form a loop which is played over and
2
Programme play below).
1
over.
ENTER
ENTER
•
Select ‘Repeat’ from the Play
1
During playback, select ‘A-B
Mode menu, then choose a repeat play
mode.
Repeat’ from the Play Mode menu.
ENTER
2
With ‘A (Loop Start)’
Play Mode
Repeat Title
Repeat Chapter
Repeat Off
Search Mode
A-B Repeat
Repeat
highlighted, press at the point you want
the loop to start.
Programme
Play Mode
A (Loop Start)
B (Loop End)
Off
Search Mode
A-B Repeat
Repeat
Programme
• To resume normal playback, select
Repeat Off from the Repeat Play menu,
or press CLEAR if no menu OSD (such as
the Play Mode menu) is displayed.
ENTER
3
With ‘B (Loop End)’ highlighted,
Programme play
press at the point you want the loop to
end.
Playback immediately jumps back to the
start point and plays the loop round and
round.
HDD DVD-Video CD Video CD Super VCD WMA/MP3
This feature lets you program the play order
3
of titles/chapters /folders/tracks on a disc or
the HDD.
Note
1 If you switch camera angles on a DVD during A-B repeat play, A-B repeat is cancelled.
2 If you switch the camera angle during repeat play of a DVD-Video disc, repeat play is cancelled.
3 When playing a programme list of DVD-Video chapters, chapters not included in the programme list may be
sometimes be played, depending on the disc.
59
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
06
Tip
ENTER
1
Select ‘Programme’ from the
• To save your programme list and exit the
programme edit screen without starting
playback, press HOME MENU or PLAY
MODE.
Play Mode menu, then ‘Input/Edit
Programme’.
The Input/Edit Programme screen varies
according to the disc type. Below is the DVD
input screen.
• Duringprogrammeplay, press NEXT
to skip to the next programme step.
Programme
• To repeat play the programme list, select
Repeat Programme from the Repeat
Play Mode menu (see Repeat play on
page 59).
Step
01.001
02.
Title (01-03)
Title 01
Chapter(001-015)
Chapter 001
Chapter 002
Chapter 003
Chapter 004
Chapter 005
Chapter 006
Chapter 007
Chapter 008
Title 02
Title 03
03.
04.
05.
06.
07.
08.
• Except CD, WMA/MP3: Press CLEAR
during playback to switch off
programme play (if no menu OSD, such
as the Disc Navigator, is displayed).
Press while stopped to erase the
programme list.
ENTER
2
Select a title, chapter, folder
or track for the current step in the
programme list.
After pressing ENTER to add the title/
chapter/folder/track, the step number
automatically moves down one.
• From the Programme menu you can
also:
Start Programme Play – Starts
playback of a saved programme list
Cancel Programme Play – Turns off
programme play, but does not erase the
programme list
Erase Programme List – Erases the
programme list and turns off
programme play
• To insert a step into the programme list,
highlight the step number where you
want to insert another step, then select a
chapter/title/folder/track as usual. After
pressing ENTER, all the subsequent
steps move down one.
• To delete a step from the programme list,
highlight the step you want to delete,
then press CLEAR.
Displaying and switching
subtitles
3
Repeat step 2 to build up a
DVD-Video DivX
programme list.
A programme list can contain up to 24 titles/
chapters/folders/tracks.
Some DVD and DivX discs have subtitles in
one or more languages; the disc box will
usually tell you which subtitle languages are
available. You can switch subtitle language
PLAY
4
Play the programme list.
1
during playback.
Programme play remains active until you
cancel programme play, erase the
programme list, eject the disc or switch off
the recorder.
Check the disc packaging for details of the
subtitle options.
Note
1 • Some discs only allow you to change subtitle language from the disc menu. Press MENU or TOP MENU to
access.
60
En
• To set subtitle preferences, see Subtitle Language on page 113.
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
06
SUBTITLE
Switching audio channels
•
Select/change the subtitle
language.
The current subtitle language is shown on-
screen and in the front panel display.
DVD (VR) DVD-RAM HDD CD Video CD Super VCD
WMA/MP3
• To switch off subtitles, press SUBTITLE
then CLEAR.
Taiwan and Philippines model:
2
For HDD and VR mode content that has
both a main and a SAP (Secondary Audio
Programme) audio channel, you can switch
Switching DVD and DivX
soundtracks
3
between main (L), SAP (R), or both (L+R).
DVD-Video DivX
Other:
2
For HDD and VR mode content recorded with
When playing a DVD disc or DivX title
recorded with two or more soundtracks
(often in different languages), you can
bilingual audio, you can switch between left
(L) channel, right (R) channel, or both (L+R).
3
1
When playing Video CDs and Audio CDs you
can switch between stereo, just the left
channel or just the right channel.
switch the soundtrack during playback.
Check the disc packaging for details of the
soundtrack options.
Some Super VCDs have two soundtracks.
With these discs you can switch between the
two soundtracks as well as individual
channels in each.
AUDIO
•
Change the audio soundtrack.
The current audio language is shown on-
screen and in the front panel display.
AUDIO
• The sound may drop out for a few
seconds when switching soundtracks.
•
Press repeatedly to display/
switch the audio channel.
The audio channel(s) currently playing are
indicated on-screen.
• Some discs feature both Dolby Digital
and DTS soundtracks. There is no analog
audio output when DTS is selected. To
listen to the DTS soundtrack, connect
this recorder to a DTS decoder or AV
amplifier/receiver with built-in DTS
decoder via the digital output. See
Connecting to an AV amplifier or receiver
on page 20 for connection details.
HDD DVD (VR) DVD-RAM
Taiwan and Philippines model:
L+R – Both channels (default)
L – Left/main channel only
R – Right/SAP channel only
Other:
L+R – Both channels (default)
L – Left channel only
R – Right channel only
Note
1 • Some discs only allow you to change audio language from the disc menu. Press MENU or TOP MENU to
access.
• To set audio language preferences, see Audio Language on page 112.
2 Only when HDD Recording Format is set to Video Mode Off (HDD Recording Format on page 115).
3 When playing a dual mono recording/bilingual recording on a VR mode disc, if you are listening to the Dolby
Digital soundtrack via the digital output, you cannot switch the audio channel. Set Dolby Digital Out to Dolby
Digital PCM (see Dolby Digital Out on page 111) or listen via the analog outputs if you need to switch the
audio channel.
61
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
06
of just the currently selected playback/
recording device (HDD or removable
disc).
CD Video CD WMA/MP3
Stereo – Stereo (default)
1/L – Left channel only
2/R – Right channel only
• To hide the information display, press
DISPLAY repeatedly until it disappears.
HDD and removable disc activity
Super VCD
display
1 Stereo – Soundtrack 1/Stereo (default)
1 L – Soundtrack 1/Left channel
1 R – Soundtrack 1/Right channel
2 Stereo – Soundtrack 2/Stereo
2 L – Soundtrack 2/Left channel
2 R – Soundtrack 2/Right channel
Press DISPLAY once to see the HDD and
removable disc (DVD, etc.) activity. Use the
HDD and DVD button to switch between the
two kinds of display.
The example displays below show high-
speed copying from HDD to DVD, and HDD
chase playback.
Rec Mode SP(2h00m/DVD)
Switching camera angles
HDD
Hi-Speed Copy
DVD-RW Video
HDD DVD
Remain 10h35m
Stop
Remain –h––m
Stop
DVD-Video
0h08m left
Some DVD-Video discs feature scenes shot
from two or more angles — check the disc
box for details: it should be marked with a
icon if it contains multi-angle scenes.
When a multi-angle scene is playing, the
same icon appears on screen to let you know
that other angles are available (this can be
switched off if you prefer — see Angle
Indicator on page 116).
Rec Mode SP(2h00m/DVD)
HDD
DVD-RW Video
Remain 10h35m
Chase Play
Rec
Remain 0h52m
Stop
Recording time
ANGLE
Relative playback position
•
Switch the camera angle.
• The angle number is displayed on-
screen.
Shows recording restrictions for
the current channel programme
• If the disc was paused, playback starts
again with the new angle.
Stop
DVD-RW VR
Original
WNBC
Stereo
Copy Once
Resume
XP (1h00m/DVD)
Finalized
Rem. 0h35m
Displaying disc information
on-screen
Disc Name
:
Comedy shows
Indicates copy-protected material
Indicates a multi-angle scene
You can display various on-screen
information about the disc loaded or the
HDD.
Play
3–2
0. 00. 15
!
DVD-R Video Chapter Time 0. 00. 21
Chapter Total 0h01m52s
DISPLAY
•
Display/change the on-screen
4.32Mbps
information.
Title Name
:
11/21 Soccer game
• Press once to show the HDD and
removable disc (DVD, etc.) activity
together. Press again to show the status
Indicates the data transfer rate
62
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
06
Tip
• See Switching camera angles on page 62
for more on multi-angle scene switching.
• When using the simultaneous play and
record feature, the display shows
information for playback only.
• During real-time copy, the copy source
playback information is displayed.
• The Video mode DVD-R/-RW displays
become the same as a DVD-Video disc
once the disc is finalized.
• The total recording time figure shown in
parenthesis is calculated based on a
12 cm/4.7 GB disc at the displayed
record setting.
• Recording and playback times for TV
recordings are approximately 0.1 %
shorter than the actual time. This is
because of the slightly different frame
rates of TV broadcasts versus DVD.
• The frame number is shown next to the
elapsed time display when the disc is
paused.
• Copy Once or Can’t Record messages
may appear in the stop or recording
displays. These indicate that the
broadcast TV programme contains copy
control information.
63
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing and recording from a DV camcorder
07
CPhlaapteyr i7ng and recording from a
DV camcorder
You can play back and record video from a
DV camcorder connected to the DV IN jack
on the front panel of this recorder.
• The recorder will only start recording
from the DV IN jack if there is a valid
signal. Recording will pause if the signal
is interrupted during recording.
Important
• If your source is copy-protected using
Copy Guard, you will not be able to
record it. See Restrictions on video
recording on page 34 for more details.
• If you connect a second recorder using a
DV cable, you cannot control the second
unit from this one.
• You can’t control this unit remotely from
a component connected to the DV IN
jack.
Recording from a DV
camcorder
• The source signal must be DVC-SD
format.
Playing from a DV camcorder
• You can’t record date and time
information from DV cassette.
1
Make sure your DV camcorder is
connected to the front panel DV IN jack.
From the Initial Setup menu, check
• During DV recording, if a part of the tape
is blank, or has copy-protected material
on it, this recorder will pause recording.
Recording will restart automatically
when there is a recordable signal.
However, if there is more than two
minutes of blank tape, this recorder will
stop recording and the camcorder
should stop (depending on the
2
that the DV audio input is setup as you
would like.
See DV Input on page 111 for more on this.
• Check also that the Audio In settings for
External Audio and Dual Mono
Recording/Bilingual Recording are as
you want them (see Audio In on
page 110).
camcorder).
HOME
MENU
Copying from a DV source
Using the recorder’s remote, you can control
both the camcorder and this recorder.
3
Select ‘DV’, then ‘DV Video
Playback’ from the Home Menu.
Start playback on the camcorder.
4
Images from the camcorder should appear
on your TV.
Important
• Some camcorders cannot be controlled
using this recorder’s remote.
• To record the incoming video, use the
HDD and DVD button to select the HDD
or a DVD for recording, then press
REC. Press F STOP REC to finish
recording. If there is no signal from the
device connected to the DV jack, or the
signal is copy-protected, recording will
pause. It will automatically restart once
there is a recordable signal.
• For best results when recording from a
DV camcorder to this recorder, we
recommend cueing the camcorder to
the place you want to start recording
from and setting the camcorder to
play-pause.
64
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing and recording from a DV camcorder
07
1
Make sure your DV camcorder is
control the camcorder from this remote
connected to the front panel DV IN jack.
control during recording.
Also, set the camcorder to VTR mode.
• If you restart recording after stopping the
camcorder, the first few seconds of the
camcorder tape will not be recorded.
Use the pause button on your camcorder
instead and recording will start
immediately.
REC MODE
2
Set the recording quality.
• See Setting the picture quality/recording
time on page 36 for detailed information.
3
From the Initial Setup menu, check
that the DV audio input is setup as you
would like.
See DV Input on page 111 for more on this.
• HDD, DVD (VR Mode) and DVD-RAM only:
A chapter marker is inserted every time
there is a break in the timecode on the
DV tape. This happens when the
recording is stopped or paused then
restarted, for example.
• Check also that the Audio In settings for
External Audio and Dual Mono
Recording/Bilingual Recording are as
you want them (see Audio In on
page 110).
• If you don’t want to see the DV recording
screen during recording, press DISPLAY
to hide it (press again to display).
HOME
MENU
• While recording, you cannot exit the DV
recording screen using the HOME
MENU or RETURN button.
4
Select ‘DV’, then ‘Copy from a DV
Source’ from the Home Menu.
• DV recording only works when the DV
camcorder is in VTR mode with a tape
loaded.
DV Auto Copy
DV Auto Copy allows you to make an exact
copy of the contents of a DV source to the
HDD or a DVD.
ENTER
5
Select ‘Record to Hard Disk
Drive’ or ‘Record to DVD’.
Find the place on the camcorder tape
1
Make sure your DV camcorder is
connected to the front panel DV IN jack.
Also, set the camcorder to VTR mode.
6
that you want to start recording from.
For best results, pause playback at the point
from which you want to record.
REC MODE
2
Set the recording quality.
• See Setting the picture quality/recording
time on page 36 for detailed information.
• Depending on your camcorder, you can
use this recorder’s remote to control the
camcorder using the , , , ,
, and buttons.
3
From the Initial Setup menu, check
that the DV audio input is setup as you
require.
See DV Input on page 111 for more on this.
ENTER
7
Select ‘Start Rec’.
• Check also that the Audio In settings for
External Audio and Dual Mono
Recording/Bilingual Recording are as
you want them (see Audio In on
page 110).
ꢀStop
1.02.22
ꢀStop
Control with these
buttons
Start Rec
Pause Rec
Stop Rec
ꢅ
ꢄ
ꢁ
ꢀ
ꢆ
ꢃ
ꢂ
HOME
MENU
HDD
Rem.
SP (2h00m/DVD)
32h45m
4
Select ‘DV’, then ‘DV Auto Copy’
from the Home Menu.
• DV recording only works when the DV
camcorder is in VTR mode with a tape
loaded.
• You can pause or stop the recording by
selecting Pause Rec or Stop Rec from
the on-screen display. You cannot
65
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing and recording from a DV camcorder
07
• There’s a picture, but no sound!
ENTER
Try switching the DV Input setting (see
5
Select ‘Record to Hard Disk
DV Input on page 111) between Stereo 1
Drive’ or ‘Record to DVD’.
1
and Stereo 2.
The DV tape is rewound to the beginning.
Once it is rewound, the DV tape is played
from the beginning and copied to either the
HDD or a DVD.
About DV
Using DV, also known as i.LINK or IEEE 1394-
1995, you can connect a DV camcorder to
this recorder using a DV cable for input of
audio, video, data and control signals.
• If there is a gap of two minutes or more
between recorded contents, the copying
process is automatically stopped.
• Once copying is finished, the DV tape is
automatically rewound.
“i.LINK” and the “i.LINK” logo are
trademarks.
• To cancel the copying process, press
F STOP REC for more than three
seconds.
• This recorder is only compatible with DV-
format (DVC-SD) camcorders. Digital
satellite receivers and Digital VHS video
recorders are not compatible.
About automatic finalization
If you use a DVD-R/-RW (Video mode) or
DVD+R/+RW disc for copying, it will
automatically be finalized after copying is
complete.
• You cannot connect more than one DV
camcorder at a time to this recorder.
• You cannot control this recorder from
external equipment connected via the
DV IN jack.
• You can’t customize the background for
DVD-R/-RW or DVD+R/+RW disc
finalization.
• It may not always be possible to control
the connected camcorder via the DV IN
jack.
• No title names are assigned.
• DV camcorders can usually record audio
as stereo 16-bit/48 kHz, or twin stereo
tracks of 12-bit/32 kHz. This recorder can
only record one stereo audio track. Set
the DV Input setting as required (see DV
Input on page 111).
• If you want to give the disc a name,
please do so before you start the copy
(see Input Disc Name on page 102).
• If a timer recording is scheduled to start,
and in some other instances, the disc
will not be finalized.
• Audio input to the DV IN jack should be
32 kHz or 48 kHz (not 44.1 kHz).
Frequently Asked Questions
• Picture disturbance in the recording
may occur if the source component
pauses playback or plays an unrecorded
section of tape, or if the power fails in the
source component, or the DV cable is
disconnected.
• I can’t get my DV camcorder to work with
the recorder!
Check that the DV cable is properly
connected. Also make sure that what
you’re trying to record is not copy-
protected.
• The DV IN jack is an input only. There is
no output functionality.
If it still doesn’t work, try switching off
the camcorder then switch back on.
Note
1 If the audio subcode on the DV tape cannot be read correctly, the audio type will not switch automatically. You
can switch the audio manually from the External Audio setting (page 110).
66
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
08
Chapter 8
Editing
Editing options
The table below shows which commands you can use with the HDD and different disc types.
DVD-R/-RW
(Video mode),
DVD+R/+RW
DVD-R/-RW, DVD-RAM
HDD
(VR mode)
Original
Play List
Create (page 69)
Play (page 69)
Erase (page 69)
Edit > Title Name (page 70)
Edit > Set Thumbnail
(page 72)
Edit > Erase Section
(page 72)
Edit > Divide (page 73)
Edit > Chapter Edit (page 73)
Edit > Set Genre (page 74)
Edit > Lock (page 75)
Edit > Move (page 75)
Edit > Combine (page 76)
Genre Name (page 76)
Multi-Mode (page 77)
Undo (page 78)
*1
*1
*1 DVD-R/-RW only
67
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
08
The Disc Navigator screen
•
•
Press to display the command
menu panel. Use the / and ENTER
buttons to navigate the menus.
The Disc Navigator screen is where you can
edit video content on unfinalized Video mode
and DVD-R/-RW (VR mode) discs, DVD+R/
+RW and DVD-RAM, as well as video
content on the hard disk drive.
PREV
NEXT
When in the title list, press to
display the previous/next page if there
are more titles than can be displayed.
Important
DISPLAY
• Unless otherwise stated, the OSDs
shown in this manual are for the Taiwan
and Philippines model.
•
•
Press to change the title
information displayed in the title list.
HDD
DVD
Press to switch
• Titles that have been recorded with a
Input Line System setting different to the
current setting of the recorder are shown
in the Disc Navigator with a blank
thumbnail image. See also Additional
information about the TV system settings
on page 119.
between the HDD and DVD Disc
Navigator screens.
• If you are editing a DVD-R/-RW (VR
mode) or DVD-RAM disc you can display
the Play List by selecting Play List from
the view options panel (press , then
select Play List from the view options,
then Play List).
• During recording, if you display the Disc
Navigator for the HDD, some of the titles
Disc Navigator (DVD)
10Titles
may appear with a
mark. These titles
12/03 SUN 11:00PM
12/03 Sun 11:00PM 4ch SP
Style
were recorded with a Input Line System
setting different to the current setting of
the recorder. During recording, these
titles cannot be played.
4
Titles
2h00m(1.0G)
12/03 SUN 8:00PM
12/03 Sun 8:00PM 9ch SP
2h00m(1.0G)
PlayList
Original
MENU
• Titles on the HDD marked with a
icon are recently recorded titles that
haven’t yet been played.
HDD
DVD
1
Select the HDD or
DVD.
DISC NAVIGATOR
DISC NAVIGATOR
2
Display the Disc Navigator
3
Press to exit the Disc
screen.
Navigator.
Playback will automatically stop when you
do this.
Editing accuracy
• The Disc Navigator is also accessible
from the Home Menu.
Some editing commands ask you whether
you want to keep Video mode compatibility
or frame accuracy (Video Mode Compatible
Editing or Frame Accurate Editing).
View options panel
Title list
Disc Navigator (HDD)
10Titles
10
12/03 SUN 11:00PM 4ch SP
Frame Accurate Editing is very precise. The
edit point is accurate to the exact frame you
choose. However, this accuracy is not
preserved in any copy you make if you use
the high-speed copy function to make a
DVD-R/-RW (Video mode) or DVD+R/+RW.
12/03 Sun 11:00PM 4ch SP
Selected
title
2h00m(1.0G)
4
Titles
9
8
7
12/03 SUN 8:00PM 9ch SP
12/03 Sun 8:00PM 9ch SP
2h00m(1.0G)
Recent first
All Genres
MENU
12/02 SAT 10:00PM 7ch SP
12/02 Sat 10:00PM 7ch SP
1h00m(1.0G)
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
HDD
SP
1h00m(1.0G)
Remain
Available
recording
time
30h30m
Title
thumbnail information menu panel
Title
Command
Video Mode Compatible Editing is less
precise. The edit point you choose will only
be accurate to within one-half to one second.
On the other hand, these edit points will be
68
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
08
preserved if you use high-speed copy to
make a DVD-R/-RW (Video mode) or
DVD+R/+RW.
1
Highlight the title you want
Select ‘Play’ from the
to play.
HDD genres
ENTER
The large capacity of the HDD means that
there may be many hours of video in the
recorder. To help you organize your HDD
video content you can assign different
genres to titles. There are 10 genres in total,
including 10 user-definable ones that you
can name as you like.
2
command menu panel.
Playback of the title you selected starts.
Disc Navigator (HDD)
10Titles
10
12/03 SUN 11:00PM 4ch
Play
12/03 Sun 11:00PM 4ch
Erase
2
4
Titles
Edit
9
8
7
12/03 SUN 8:00PM 9ch
12/03 Sun 8:00PM 9ch
Create
Recent first
All Genres
2
Genre Name
12/02 SAT 10:00PM 7ch
12/02 Sat 10:00PM 7ch
1
DVD (VR) DVD-RAM
Play List only
Multi-Mode
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
1h00m(1.0G)
Use this function to create a Play List and
add titles to it.
HDD
SP
Remain
30h30m
Before you can use this command, make
sure that the Play List is switched on in the
view options panel on the left.
Erase
DVD (Video) DVD (VR) DVD+R DVD+RW DVD-RAM HDD
ENTER
Use this function to erase unwanted titles.
1
Select ‘Create’ from the
When you erase titles from the HDD or
Original titles from a VR mode DVD-RW, the
available recording space increases
command menu panel.
Disc Navigator (DVD)
0Titles
accordingly. Erasing a title from a DVD-RW
(Video mode) or DVD+RW disc increases
the available recording time only if it is the
Play
No title
Erase
Edit
4
Titles
1
Play List
last title on the disc.
Create
Erasing Play List titles, or titles from a DVD-R
(VR mode or Video mode) or DVD+R, will not
result in any more free space on the disc.
Undo
DVD
VR Mode
Remain
0h30m
ENTER
1
Highlight the title you want
2
Select an original title to add
to erase.
to the Play List.
Repeat these two steps to add as many titles
as necessary to the Play List.
ENTER
2
Select ‘Erase’ from the
command menu panel.
Play
ENTER
DVD (Video) DVD (VR) DVD+R DVD+RW DVD-RAM HDD
3
Select ‘Yes’ to confirm or ‘No’
Use this function to start playback of a title.
to cancel.
Note
69
En
1 There may be cases where erasing a title from a DVD+R/+RW disc will result in incontiguous title numbers.
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
08
• A name generated automatically by the
recorder will already be in the name
input section of the screen. Use the
REV SCAN/ FWD SCAN
Tip
• You can erase a title quickly by pressing
CLEAR when the title is highlighted.
Confirm the edit by pressing ENTER.
buttons to change the cursor position.
• Select CAPS or small to change to upper
or lower-case, or use the CASE
SELECTION buttons ( PREV/
NEXT).
Title Name
DVD (Video) DVD (VR) DVD+R DVD+RW DVD-RAM HDD
• You can also use the CLEAR button to
delete characters directly (press and
hold for two seconds to delete the whole
name). For other remote control key
shortcuts, see Using the remote key
shortcuts to input a name on page 71.
You can give titles new names of up to
64 characters long for VR mode, DVD-RAM
and HDD recordings, and up to
40 characters for Video mode recordings
and DVD+R/+RW discs.
• For discs formatted on a different DVD
recorder, you will see only a limited
character set.
1
Highlight the title you want
to name (or rename).
ENTER
ENTER
4
Select ‘OK’ to enter the name
2
Select ‘Edit’ > ‘Title Name’
and return to the main Disc Navigator
screen.
from the command menu panel.
• To return to the main Disc Navigator
screen without saving changes to the
title name, press RETURN.
Disc Navigator (HDD)
10Titles
10
12/03 SUN 11:00PM 4ch
12/03 Sun 11:00PM
Title Name
Set Thumbnail
4
Titles
Erase Section
9
8
7
12/03 SUN 8:00PM 9
Divide
12/03 Sun 8:00PM 9
Chapter Edit
Recent first
All Genres
Set Genre
12/02 SAT 10:00PM 7
Lock
12/02 Sat 10:00PM 7
Cancel
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
1h00m(1.0G)
HDD
SP
Remain
30h30m
ENTER
3
Input a name for the selected
title.
Input Title Name
12/03 Sun 11:00PM 4ch SP
A B C D E F G H
I
J
K L M .
,
?
:
!
CAPS
small
N
O
P
Q
R
S T U V W X Y Z
(
)
;
Æ ç
A A A A A A
E
E
E
E
I
I
I
I
#
D
0
N
1
O
2
O
3
O
4
O O
ø
U U U U Y
=
ß $
_
%
&
5
6
]
7
8
9
<
|
¬
>
~
+ – / @ [ ¥
ˆ
x
{
}
¡
_
a
<<
c
£
\
§
·
¨
¸
© –
–
/
®
¿
/4
°
`
< < 1
o
1
3
2
3
1
¶
–
/4
2
´
OK
Clear
Space
70
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
08
Using the remote key shortcuts to
input a name
The table below shows the remote control
key shortcuts that you can use to input
characters in the name input screen.
Pressing a button repeatedly cycles through
the characters shown.
Using a USB keyboard to enter a name
Using a USB keyboard connected to this
recorder makes entering names very quick
1
and convenient. When in USB keyboard
input mode, a USB icon ( ) appears in the
2
lower-left of the screen.
Other than the standard alpha-numeric keys,
use the following keys when entering names:
If you want to enter two characters in
succession that are both on the same button
(for example a P and an R), press
FWD SCAN to advance the cursor one
space manually between inputting the two
characters.
Key
Function
Change the cursor position
Select CAPS
F1
Key
1
Characters
Key
6
Characters
. , ’ ? ! – & 1
m n o 6 ö ô ò ó
ø ñ
Select small
F2
a b c 2 ä à á â ã
æ ç
p q r s 7 $
ÿ/ß *1
Delete character at the current
cursor position
2
7
delete
Delete the character at the
previous cursor position
d e f 3 è é ë ê
g h i 4 î ï ì í ¡
j k l 5 £
t u v 8 ü ù û ú
3
4
8
9
back
space
w x y z 9
0
Enter the name
enter
5
0
[cursor back]
[cursor
forward]
Exit the input screen
esc
/ [change case] CLEAR
[clear
character]
<space>
[finish name
input]
~ ( ) _ / : ; ” ` ^ @ # ∗ % ¥ | + =
+
{ } [ ] < >
*1
lower-case: ÿ; upper-case: ß
Note
1 • It’s possible that some USB keyboards will not work exactly as expected when connected to this recorder. See
also Connecting a USB device on page 23 for more connection information.
• Certain keyboards may not be able to correctly input all characters.
2 If you use the remote control to enter a name when in the USB keyboard input mode, the recorder will
automatically switch to remote control input mode. Press any key on the USB keyboard to return to USB
keyboard input mode.
71
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
08
Set Thumbnail
Erase Section
HDD DVD (Video) DVD (VR) DVD+R DVD+RW DVD-RAM
HDD DVD (VR) DVD-RAM
You can change the thumbnail picture that
appears in the Disc Navigator for a title to
any frame that appears in that title.
Using this command you can delete a part of
a title, ideal for cutting out the commercial
breaks in a recording made from the TV.
1
Highlight the title you want
1
Highlight the title containing
to change the thumbnail picture for.
the section you want to erase.
ENTER
ENTER
2
Select ‘Edit’ > ‘Set Thumbnail’
2
Select ‘Edit’ > ‘Erase Section’
from the command menu panel.
from the command menu panel.
The thumbnail setting screen appears from
which you can find the frame you want.
ENTER
3
edit.
HDD only: Select the type of
Disc Navigator (HDD)
10Titles
10
12/03 SUN 11:00PM 4ch
12/03 Sun 11:00PM
Title Name
HDD/DVD RECORDER
Set Thumbnail
4
Titles
Erase Section
9
8
7
Please select the type of editing.
Video Mode Compatible Editing is
recommended for compatibility with
high-speed copying.
12/03 SUN 8:00PM 9
Divide
12/03 Sun 8:00PM 9
Chapter Edit
Recent first
All Genres
Set Genre
12/02 SAT 10:00PM 7
Lock
12/02 Sat 10:00PM 7
Cancel
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
1h00m(1.0G)
HDD
SP
Remain
30h30m
Video Mode Compatible Editing
Frame Accurate Editing
3
Use the playback controls (, , ,
• For more information about these
options, see Editing accuracy on page 68.
, etc.) to find a suitable frame, then
press ENTER to set.
4
Highlight ‘From’ then use the
Set Thumbnail (HDD)
playback controls (, , , , etc.) to
find the start of the section to erase, then
press ENTER.
12/03 Sun 11:00 PM 4ch SP
2h00m
Rec. time
The bar at the bottom of the screen indicates
the current play position in the title. After
pressing ENTER, a marker shows the start of
the section.
10-1 00.00.09.15
Play Pause
OK
Exit
Erase Section (HDD)
You can also use the chapter and time
12/03 Sun 11:00 PM 4ch SP
search features (press PLAY MODE), and
2h00m
Rec. time
the
CM SKIP and
CM BACK buttons.
10-1 00.00.09.15
Play Pause
4
Select ‘Exit’ to return to the
From
To
Exit
Edit screen.
72
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
08
4
Use the playback controls (, , ,
ENTER
, etc.) to find the place you want to
divide the title.
5
Highlight ‘To’ then, in the
same way, find the end of the section to
erase, then press ENTER.
Divide Title (HDD)
12/03 Sun 11:00 PM 4ch SP
After pressing ENTER, another marker
indicates the end of the section, with the
section itself marked in red.
2h00m
Rec. time
10–1 00.00.09.15
Play Pause
ENTER
Divide
Cancel
6
Select ‘Yes’ to confirm or ‘No’
to cancel.
In the thumbnail viewer you can see a few
seconds of video either side of the marked
section to see how the edit will look.
ENTER
5
Press to divide the title at the
current playback position.
• When editing VR mode Original content,
you may not be able to erase very short
sections (less than five seconds).
ENTER
6
Select ‘Yes’ to confirm or ‘No’
to cancel.
Divided titles cannot
be combined.
OK?
!
Divide
Yes
No
HDD DVD (VR) DVD-RAM
Play List only
Use this command to divide a title into two.
Note that once divided, the two new HDD
titles cannot be recombined into one again.
Chapter Edit
DVD (VR) DVD-RAM HDD
When editing a VR mode DVD or video on
the HDD you can edit individual chapters
within a title, with commands for erasing,
combining and dividing.
1
Highlight the title you want
to divide.
ENTER
1
Highlight the title that contains the
2
Select ‘Edit’ > ‘Divide’ from
chapters you want to edit.
the command menu panel.
3
HDD only: Select the type of edit.
ENTER
2
Select ‘Edit’ > ‘Chapter Edit’
HDD/DVD RECORDER
from the command menu panel.
Please select the type of editing.
Video Mode Compatible Editing is
recommended for compatibility with
high-speed copying.
Video Mode Compatible Editing
Frame Accurate Editing
• For more information about these
options, see Editing accuracy on page 68.
73
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
08
Move command only: Select the
destination for the chapter, and press
ENTER.
ENTER
3
edit.
HDD only: Select the type of
Chapter Edit (DVD VR mode Play List)
HDD/DVD RECORDER
12/03 Sun 11:00 PM
Erase
Please select the type of editing.
Video Mode Compatible Editing is
recommended for compatibility with
high-speed copying.
1h
Move
Rec. time
Chapter
0h
Cancel
001
002
003
004
005
Exit
Divide
Erase/Move
Combine
Video Mode Compatible Editing
Frame Accurate Editing
3
• Combine – Combine two adjacent
chapters into one: Highlight the bar
divider between two adjacent chapters
and press ENTER.
• For more information about these
options, see Editing accuracy on page 68.
4
Select the command you want:
• Divide – Divide a chapter into two or
more parts: Use the playback controls
(, , , , etc.) to find the point at
which you want to divide the chapter,
then press ENTER.
Chapter Edit (DVD VR mode Play List)
12/03 Sun 11:00 PM 4ch SP
1h00m
Rec. time
1
2
3
4
5
Chapter Edit (DVD VR mode Play List)
12/03 Sun 11:00 PM 4ch SP
Exit
Divide
Erase/Move
Combine
1h00m
5
Rec. time
Chapters
1–1
0.00.00
Play
ENTER
Exit
Divide
Erase/Move
Combine
5
Select ‘Exit’ to get back to the
main Disc Navigator screen.
You can keep dividing the chapter as
many times as you wish (up to
Set Genre
999 chapters per DVD-R/-RW/-RAM disc
or 99 chapters per HDD title).
HDD
1
2
Use this command to assign a genre to a
title.
• Erase /Move – Erase or move
chapters: Select the chapter you want to
erase/move and press ENTER. Select
whether you want to erase or move the
chapter.
1
Highlight the title you want
to assign a genre to.
Note
1 When editing VR mode Original content, it may not be possible to erase chapters less than five seconds long.
2 VR mode Play List only.
3 It may not always be possible to combine two chapters, even though they are adjacent. If a chapter has been
divided into three, then the middle chapter erased, it is not possible to combine the two remaining chapters into
one.
74
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
08
ENTER
ENTER
2
Select ‘Edit’ > ‘Set Genre’ from
2
Select ‘Edit’ > ‘Lock’ from the
the command menu panel.
command menu panel.
Disc Navigator (HDD)
Disc Navigator (HDD)
10
10Titles
10Titles
10
12/03 SUN 11:00PM 4ch
12/03 SUN 11:00PM 4ch
Title Name
12/03 Sun 11:00PM
12/03 Sun 11:00PM
Title Name
Set Thumbnail
Set Thumbnail
4
Titles
4
Titles
Erase Section
Erase Section
12/03 SUN 8:00PM 9
9
9
8
7
12/03 SUN 8:00PM 9
Divide
Divide
12/03 Sun 8:00PM 9
12/03 Sun 8:00PM 9
Chapter Edit
Chapter Edit
Recent first
All Genres
Recent first
All Genres
Set Genre
Set Genre
8
7
12/02 SAT 10:00PM 7
Lock
12/02 Sat 10:00PM 7
12/02 SAT 10:00PM 7
Lock
12/02 Sat 10:00PM 7
Cancel
Cancel
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
1h00m(1.0G)
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
1h00m(1.0G)
HDD
SP
Remain
30h30m
HDD
SP
Remain
30h30m
An unlocked title will become locked; a
locked title will be unlocked. Locked titles are
shown in the Disc Navigator with a padlock
icon.
ENTER
3
Select a genre for the title.
Disc Navigator (HDD)
10
10Titles
12/03 SUN 11:00PM 4ch
Move
12/03Sun 11:00PM
No Category
4
Titles
Free1
9
Free2
12/03 SUN 8:00PM
12/03 Sun 8:00PM
ee3
DVD (VR) DVD-RAM
Play List only
F
r
Recent first
All Genres
Free4
Free5
Use this function to re-arrange the playing
order of Play List titles.
8
7
12/02 SAT 10:00PM
Free6
12/02 Sat 10:00PM
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
1h00m(1.0G)
HDD
SP
Remain
30h30m
1
Highlight the title you want
Select ‘Edit’ > ‘Move’ from the
to move.
Lock
HDD DVD (Video) DVD (VR) DVD+R DVD+RW DVD-RAM
ENTER
2
Original only
command menu panel.
You can lock a title so that it can’t be edited
or erased accidently. If you do need to edit it,
you can always unlock it later.
Disc Navigator (DVD)
10Titles
1
2
3
4
12/03 SUN 11:00PM 4c
12/03 Sun 11:00PM
Title Name
humbnail
Se
t
T
4
Titles
EraseSection
12/03 SUN 8:00PM
Important
Divide
12/03 Sun 8:00PM
Chapter Edit
Play List
Move
• You can’t undo any edits made before
changing the lock status. You also can’t
undo a lock/unlock command using the
Undo option from the Disc Navigator
menu.
12/02 SAT 10:00PM Combine
12/02 Sat 10:00PM
Cancel
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
1h00m(1.0G)
DVD
VR Mode
Remain
0h30m
1
Highlight the title you want to lock
(or unlock).
75
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
08
ENTER
ENTER
3
Select a new position for the
3
Select another title to
title.
combine with the first.
This title will be appended to the first title
selected.
Title to move
Disc Navigator (DVD)
10Titles
The screen below shows title 3 selected to be
appended to title 1.
1
12/03 SUN 11:00PM 4ch SP
12/03 Sun 11:00PM 4ch SP
2h00m(1.0G)
4
Titles
2
3
4
12/03 SUN 8:00PM 9ch SP
12/03 Sun 8:00PM 9ch SP
2h00m(1.0G)
Disc Navigator (DVD)
10Titles
Play List
MENU
1
12/03 SUN 11:00PM 4ch SP
12/02 SAT 10:00PM 7ch SP
12/02 Sat 10:00PM 7ch SP
12/03 Sun 11:00PM 4ch SP
2h00m(1.0G)
4
Titles
1h00m(1.0G)
2
12/03 SUN 8:00PM 9ch SP
12/03 Sun 8:00PM 9ch SP
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
DVD
VR Mode
Remain
0h30m
Play List
MENU
2h00m(1.0G)
1h00m(1.0G)
3
12/02 SAT 10:00PM 7ch SP
12/02 Sat 10:00PM 7ch SP
1h00m(1.0G)
Insert position
4
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
DVD
VR Mode
After pressing ENTER, the new, updated Play
1h00m(1.0G)
Remain
0h30m
List is displayed.
ENTER
Combine
4
Select ‘Yes’ to confirm or ‘No’
DVD (VR) DVD-RAM
Play List only
to cancel.
Use this function to combine two Play List
titles into one.
OK to combine titles
1 and 3 ?
!
Yes
No
1
Highlight the title you want
Genre Name
to combine.
This title will remain in the same place after
combining with another title.
HDD
Use this command to rename one of the five
user-definable genres (Free 1 to Free 10).
ENTER
2
Select ‘Edit’ > ‘Combine’ from
ENTER
the command menu panel.
1
Select ‘Genre Name’ from the
Disc Navigator (DVD)
command menu panel.
10Titles
1
2
12/03 SUN 11:00PM 4c
12/03 Sun 11:00PM
Title Name
humbnail
Disc Navigator (HDD)
10Titles
Se
t
T
4
Titles
EraseSection
12/03 SUN 8:00PM
Divide
12/03 Sun 8:00PM
Chapter Edit
10
12/03 SUN 11:00PM 4ch
Play
12/03 Sun 11:00PM 4ch
Play List
Erase
2
4
Titles
Move
Edit
9
8
7
3
12/02 SAT 10:00PM Combine
12/03 SUN 8:00PM 9ch
12/03 Sun 8:00PM 9ch
12/02 Sat 10:00PM
Recent first
All Genres
Cancel
Genre Name
12/02 SAT 10:00PM 7ch
12/02 Sat 10:00PM 7ch
Multi-Mode
4
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
DVD
VR Mode
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
1h00m(1.0G)
1h00m(1.0G)
Remain
0h30m
HDD
SP
Remain
30h30m
76
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
08
Multi-Mode
ENTER
HDD
2
Select one of the user-
definable genre names.
Multi-Mode allows you to select several
titles, then select a command that will be
applied to all of them. In this way you can
select multiple titles and then erase them all
at once, for example.
Disc Navigator (HDD)
10Titles
10
12/03 SUN 11:00PM 4ch
12/03 Sun 11:00PM
Free1
Free2
Free3
4
Titles
12/03 SUN 8:00PM 9
Free4
12/03 Sun 8:00PM 9
Free5
9
8
7
Recent first
All Genres
Free6
Free7
12/02 SAT 10:00PM 7
12/02 Sat 10:00PM 7
ENTER
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
1h00m(1.0G)
1
Select ‘Multi-Mode’ from the
HDD
SP
command menu panel.
Remain
30h30m
Disc Navigator (HDD)
10Titles
10
12/03 SUN 11:00PM 4ch
ENTER
Play
12/03 Sun 11:00PM 4ch
Erase
3
Input a name for the genre.
2
4
Titles
Edit
9
8
7
12/03 SUN 8:00PM 9ch
12/03 Sun 8:00PM 9ch
• The name can be up to 12 characters
long.
Recent first
All Genres
2
Genre Name
12/02 SAT 10:00PM 7ch
12/02 Sat 10:00PM 7ch
Multi-Mode
• For information on remote control key
short cuts, see Using the remote key
shortcuts to input a name on page 71.
1
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
1h00m(1.0G)
HDD
SP
Remain
30h30m
Input Genre Name
Free
1
ENTER
A B C D E
F
G H
I
J
K L M
.
(
I
,
)
I
ß
_
}
˚
`
?
:
!
;
CAPS
small
2
Select titles from the title list.
N
A
D
0
O
A
N
1
P
A
O
2
Q
A
O
3
R
A
O
4
S T U V WX Y Z
ç
A
O
5
[
§
·
Æ
O
6
E
U
8
ˆ
E
U
9
÷
<<
E
U
<
x
E
U
=
I
I
#
%
Selected titles are marked with a .
ø
7
]
Y
>
{
$
&
~
+
–
/
@
¥
|
¡
_
a
–
c
£
\
µ
¨
¸
©
¬
–
/2
®
/4
< < 14
/
o
–
1
3
2
3
1
¿
¶
´
ENTER
Space
OK
Clear
3
Select the command that you
want applied to all the marked titles.
For example, select Erase to erase all the
marked titles.
ENTER
4
and exit.
Select ‘OK’ to enter the name
Disc Navigator (HDD)
Multi-Mode
10Titles
12/03 SUN 11:00PM 4c
12/03 Sun 11:00PM 4ch
Erase
Lock
4
Titles
Unlock
9
12/03 SUN 8:00PM 9ch Change Genre
12/03 Sun 8:00PM 9ch
Recent first
All Genres
12/02 SAT 10:00PM 7ch Single-Mode
12/02 Sat 10:00PM 7ch
11/29 WED 7:00PM 2ch SP
11/29 Wed 7:00PM 2ch SP
HDD
SP
1h00m(1.0G)
Remain
30h30m
Once the command is completed, Multi-
Mode is automatically exited.
77
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
08
Undo
DVD (Video) DVD (VR) DVD+R DVD+RW
If you make a mistake while editing, you can
generally undo it. There is one level of undo
(in other words, you can only undo the last
edit you made).
ENTER
•
Select ‘Undo’ from the
command menu panel.
• You can’t undo anything after exiting the
Disc Navigator screen.
Disc Navigator (DVD)
0Titles
No title
Play
Erase
4
Titles
Edit
Play List
Create
Undo
DVD
VR Mode
Remain
0h30m
Frequently asked questions
• Why doesn’t the available recording time
increase when I erase titles from a VR
mode DVD-R?
When you erase titles from a DVD-R (or
DVD+R), the titles are no longer
displayed, but the content remains on
the disc. DVD-R/+R are write-once
media; they can’t be erased or rewritten.
• I can’t edit my disc!
You may find that as the available
recording time is reduced on a VR mode
DVD-R disc, editing is no longer
possible. This is because information
about your edits requires a certain
amount of disc space. As you edit, this
information builds up, eventually
preventing you from editing further.
78
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying and backup
09
Chapter 9
Copying and backup
Restrictions on copying
Introduction
Commercial DVD-Video discs are protected
using Copy Guard. These discs cannot be
copied to the HDD.
Use the copying features of this recorder to:
• Back up important recordings stored on
the HDD to a DVD.
Some video material is copy-once protected.
This means that it can be recorded to HDD,
but it can’t then be freely copied again. If you
want to transfer copy-once protected
material from HDD to DVD, you’ll need to a
CPRM ver. 1.1 or higher VR mode DVD-RW,
ver. 2.0 or 2.1 VR mode DVD-R, or CPRM-
compatible DVD-RAM disc (see CPRM on
page 35 for more on this). Only one instance
of a copy-once protected title can be added
to the Copy List, and after it’s been copied,
the title is erased from the HDD (it is
• Make a DVD copy of a recording on the
HDD to play in another player.
• Transfer video from a DVD to the HDD
for editing.
• Transfer edited video from the HDD to
DVD.
The simplest way to copy a title is to use the
One Touch Copy feature. This copies the
currently playing HDD title to DVD, or DVD
title to the HDD. See One Touch Copy below
for detailed instructions.
therefore not possible to copy a locked title
that is copy-once protected).
For more sophisticated copying tasks you
can build a Copy List of titles to copy, and
edit titles so that you only copy the bits you
want. See Using Copy Lists on page 81 for
detailed instructions.
You can identify copy-once protected
material during playback by displaying disc
information on-screen. If the current title is
copy-once protected, an exclamation mark
( ! ) is shown.
Where possible, the recorder will copy your
recordings at high-speed. Depending on the
recording mode, the kind of disc loaded and
various other factors, copying can be as fast
as one minute per hour of video. See
Minimum copying times on page 121 for
more on copying times.
Copyright
Recording equipment should be used only
for lawful copying and you are advised to
check carefully what is lawful copying in the
country in which you are making a copy.
Copying of copyright material such as films
or music is unlawful unless permitted by a
legal exception or consented to by the
rightowners.
If you want to save disc space you can copy
video at a lower recording quality (for
example, an XP recording on the HDD
copied to SP on a DVD). Copying in this way
is always done in real-time.
When real-time copying from the HDD to a
DVD-R/-RW (Video mode) or DVD+R/+RW,
the chapter markers in the original material
are not copied. Chapter markers are put into
the copy at intervals, according to the Auto
Chapter settings (see also Auto Chapter
(Video) and Auto Chapter (DVD+R/+RW) on
page 114).
One Touch Copy
* See also Copyright above.
The One Touch Copy feature copies the
currently playing or selected (in the Disc
Navigator) HDD title to DVD, or DVD title to
HDD. The whole title is copied, regardless of
where in the title you start the copy.
79
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying and backup
09
HDD to DVD copies are made in the same
recording mode. When copying DVD to
HDD, the copy is made in whatever
recording mode is currently set.
• The chapter markers in the copy may not
be in exactly the same positions as the
original when recording on to a DVD-R/
-RW (Video mode) or DVD+R/+RW.
• You can’t use the One Touch Copy
function to copy a title if any part of the
title is copy-once protected.
Make sure that a recordable DVD disc is
loaded when trying to copy from the HDD.
REC MODE
• A title that contains mixed aspect ratios
can’t be copied to a DVD-R/-RW (Video
mode) or DVD+R/+RW. Use a DVD-R/
-RW (VR mode) or DVD-RAM disc for this
type of material.
1
If you’re copying from DVD to
the HDD, select a recording mode.
Note that selecting a recording mode higher
than the title playing will not result in a better
quality recording.
1
• Low resolution (SEP through LP modes )
ONE TOUCH
COPY
widescreen material can’t be copied to a
DVD-R/-RW (Video mode) or DVD+R/
+RW. Use a DVD-R/-RW (VR mode) or
DVD-RAM disc for this type of material.
2
Press during playback to copy
the current title.
The front panel display indicates that the title
is being copied.
• When HDD Recording Format is set to
Video Mode Off, titles recorded in LP/
MN9 to MN15 modes cannot be high-
speed copied to a DVD-R/-RW (Video
mode) or DVD+R/+RW. Please use a
DVD-R/-RW (VR mode) or DVD-RAM.
• High-speed copying is used when
copying from the HDD to DVD. Playback
continues while copying.
• Real-time copying is used when copying
from DVD to the HDD. Playback restarts
from the beginning of the title.
• Recordings of dual mono/bilingual
broadcasts cannot be high-speed copied
to a DVD -R/-RW (Video mode) or
DVD+R/+RW. Please use a DVD-R/-RW
(VR mode) or DVD-RAM.
Cancelling One Touch Copy
You can cancel a One Touch Copy once it’s
started.
ONE TOUCH
COPY
• XP+ titles cannot be copied to DVD via
One Touch Copy.
•
Press and hold for more than a
second.
• Titles over eight hours cannot be copied
to single-layer DVD+R/+RW discs using
One Touch Copy. Use DVD+R DL discs
for titles over eight hours.
Copying is cancelled and the video already
copied is erased.
• If you cancel a HDD to DVD-R/+R copy,
the space available for recording does
not return to the pre-copy figure.
• Titles recorded in MN1 to MN6, SEP, SLP
or EP mode cannot be copied to DVD+R/
+RW using One Touch Copy.
Notes on copying using One Touch
Copy
Copying to the HDD
• The maximum title length for copying is
12 hours.
Copying to DVD
• Title name, chapter markers, as well as
thumbnail picture markers for the Disc
Navigator, are also copied. However, if
you copy to a DVD-R/-RW (Video mode)
or DVD+R/+RW, only the first
• Title name and chapter markers are also
copied, except when copying from a
finalized Video mode DVD-R/-RW.
40 characters of a name are copied.
Note
80
En
1 In manual recording mode these equate to MN1 to MN15 (Video Mode Off) or MN1 to MN8 (Video Mode On).
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying and backup
09
• Thumbnail picture markers and chapter
markers for the Disc Navigator are
copied, but their position in the copy may
be slightly changed from the original.
• If you want to use a DVD-RW (VR mode)
disc for the copy, make sure it is
initialized before you start.
HOME
MENU
• If some part of the title being copied is
copy-protected, copying will start, but
the copy-protected portions will not be
copied.
2
Select ‘Copy’ from the Home
Menu.
ENTER
3
Select ‘HDD DVD’.
Using Copy Lists
HDD DVD
DVD/CD HDD
Disc Back-up
* See also Copyright on page 79.
At its simplest, a Copy List is just a list of
HDD or DVD titles that you want to copy.
When copying HDD titles to DVD, you can,
however, edit the titles in your copy list,
erasing chapters you don’t need, or re-
naming titles, for example. Edits you make to
titles in the Copy List do not affect the actual
video content; only the ‘virtual’ content of the
Copy List. So you can freely erase and modify
anything in your Copy List safe in the
knowledge that the actual content is not
being altered.
• If this is the first time to create a Copy
List, skip to step 5 below.
4
If there is already a Copy List stored in
the recorder, choose whether to ‘Create
New Copy List’ or ‘Continue Using
Previous Copy List’.
Continue Using Previous Copy List
Create New Copy List
Copying from HDD to DVD
Important
• If you select Continue Using Previous
Copy List, skip to step 10 below.
• Unless otherwise stated, the OSDs
shown in this manual are for the Taiwan
and Philippines model.
• Selecting Create New Copy List will
erase any Copy List already stored in the
recorder.
• The recorder can only store one Copy List
at a time.
ENTER
5
Add titles to the Copy List
• The Copy List is erased if the Input Line
System setting is changed (see
Additional information about the TV
system settings on page 119).
(highlight a title and press ENTER to add).
8
Title
Copy
Select Title
HDD DVD (Video mode)
1 > 2 > 3
11/29 WED 11/29Wed 7:00PM 2ch SP
11/29 WED 11/29Wed 7:00PM 2ch SP
11/29 WED 11/29Wed 7:00PM 2ch SP
11/29 WED 11/29Wed 7:00PM 2ch SP
11/29 WED 11/29Wed 7:00PM 2ch SP
11/29 WED 11/29Wed 7:00PM 2ch SP
11/29 WED 11/29Wed 7:00PM 2ch SP
11/29 WED 11/29Wed 7:00PM 2ch SP
8
7
6
5
4
3
2
1
• Resetting the recorder to its factory
settings (see Resetting the recorder on
page 136) will erase the Copy List.
Back
Next
Recent first
All Genres
1
Load a recordable DVD.
11/29Wed 7:00PM 2ch SP
7:00PM
2h00m(1.0G) 2ch
• It is possible to complete the following
steps without having a recordable DVD
loaded (or having an uninitialized DVD
loaded); however, the steps are slightly
different.
SP
Free1
Copy List Total
Current DVD Remain
0.0G
4.3G
Titles you’ve added to the Copy List are
highlighted in pink.
81
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying and backup
09
There are some restrictions on titles that can
be added to the Copy List if you are copying
to a DVD-R/-RW (Video mode) or DVD+R/
+RW:
8
To edit a title, highlight it using the
/ buttons, then press ENTER.
2
Title
Copy
Title Edit
HDD DVD (Video mode)
1 > 2 > 3
11/29Wed 7:00PM 2c
1
2
Erase
11/29Wed 7:00PM 2c
• When adding titles that contain copy-
once protected material, the copy-once
parts will not be added.
Title Name
Back
Next
Erase Section
Move
Preview
Cancel
• When adding titles that contain material
of more than one aspect ratio (screen
size), each part with a different aspect
ratio will be added as a separate title if
high-speed copying is possible.
11/29Wed 7:00PM 2ch SP
1h00m(2.0G)
Copy List Total
4.3G
4.3G
Current DVD Remain
A menu of editing commands appears:
1
Depending on the title , high-speed copying
may not be possible to DVDs.
• Erase – Erase individual titles from the
Copy List (see Erase on page 69).
6
Press to display the command
menu panel.
• Title Name – Name or rename a title in
the Copy List (see Title Name on
page 70).
The command menu panel
• Erase Section – Erase part of a title (see
Erase Section on page 72).
8
Title
Copy
Select Title
HDD DVD (Video mode)
1 > 2 > 3
8
7
6
5
4
3
2
1
11/29 WED 11/29Wed 7:00PM 2ch SP
11/29 WED 11/29Wed 7:00PM 2ch SP
11/29 WED 11/29Wed 7:00PM 2ch SP
11/29 WED 11/29Wed 7:00PM 2ch SP
11/29 WED 11/29Wed 7:00PM 2ch SP
11/29 WED 11/29Wed 7:00PM 2ch SP
11/29 WED 11/29Wed 7:00PM 2ch SP
11/29 WED 11/29Wed 7:00PM 2ch SP
• Move – Change the order of titles in the
Copy List (see Move on page 75).
Back
Next
Recent first
All Genres
• Preview – Check the content of a title in
the Copy List.
11/29Wed 7:00PM 2ch SP
7:00PM
2h00m(1.0G) 2ch
• Divide – Divide a title in the Copy List
into two (see Divide on page 73).
SP
Free1
Copy List Total
Current DVD Remain
4.3G
4.3G
• Combine – Combine two titles in the
Copy List into one (see Combine on
page 76).
7
Select ‘Next’ to move on to the Title
Edit screen.
• Chapter Edit – Edit chapters within a
Copy List title (see Chapter Edit on
page 73):
• Divide – Divide a chapter into two.
• Erase/Move – Erase a chapter/
Change the chapter order.
• Combine – Combine two chapters into
one.
2
Title
Copy
HDD DVD (Video mode)
1 > 2 > 3
Title Edit
11/29Wed 7:00PM 2ch SP
11/29Wed 7:00PM 2ch SP
1
2
Back
Next
11/29Wed 7:00PM 2ch SP
1h00m(2.0G)
Copy List Total
Current DVD Remain
4.3G
4.3G
Note
1 The following titles cannot be copied at high-speed for DVD+R/+RW:
• Titles recorded in MN1 to MN6, SEP, SLP or EP mode.
The following titles cannot be copied at high-speed for DVD-R/-RW (Video Mode) and DVD+R/+RW:
• Widescreen titles recorded at low resolution (SEP through LP/MN1 to MN15 (Video Mode Off) or MN1 to MN8
(Video Mode On)).
• LP/MN9 to MN15 recordings when HDD Recording Format is set to Video Mode Off.
• Dual mono/Bilingual recordings.
• Combined titles that were originally recorded using different recording modes.
The following titles cannot be copied at high-speed for any types of DVD:
• XP+ titles.
82
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying and backup
09
• Set Thumbnail – Set the thumbnail
frame for a title (see Set Thumbnail on
page 72).
• Select Finalize if you want to
automatically finalize a DVD-R/-RW
(Video mode) or DVD+R after copying.
Select a title menu style from the
following screen.
1
• Recording Mode – Set the picture
quality of the copy (see Recording Mode
on page 84).
ENTER
• Dual Mono Audio/Bilingual – Set how
dual mono/bilingual audio should be
copied when copying from HDD to
DVD-R/-RW (Video mode) and DVD+R/
+RW (see Dual Mono Audio/Bilingual on
page 85).
11
copying.
Select ‘Start Copy’ to start
Copy
HDD DVD (Video Mode)
1 > 2 > 3
Start Copy
HDD
DVD-RW
Video Mode
Back
Recording Mode
Input Disc Name
Finalize
Copy Time 0h 16m
• Cancel – Exit the menu.
Recording Mode
Disc Name
High-Speed
Off
Repeat this step for as many titles you have
that need editing.
Finalize
Start Copy
Copy List Total
4.3G
4.3G
Current DVD Remain
• If you’re using a DVD-R DL or DVD+R DL
disc and the copy will span both layers,
the Copy List Total bar will be purple.
9
Display the command menu
Select ‘Next’ to proceed.
panel.
• The Current DVD Remain bar will be
half-length if the first layer of a DVD-R DL
or DVD+R DL disc is already full.
ENTER
10
2
Title
Copy
Title Edit
HDD DVD (Video mode)
1 > 2 > 3
Copying from DVD to HDD
11/29Wed 7:00PM 2ch SP
11/29Wed 7:00PM 2ch SP
1
2
Back
Next
Important
• The DVD to HDD Copy screen isn’t
accessible when a finalized Video mode
DVD-R/-RW or a DVD-Video is loaded. As
long as the disc is not Copy Guard
protected, you can still use the One
Touch Copy function, however (see One
Touch Copy on page 79).
11/29Wed 7:00PM 2ch SP
1h00m(2.0G)
Copy List Total
Current DVD Remain
4.3G
4.3G
There are several options available from the
next screen:
• The recorder can only store one Copy List
at a time.
• Select Recording Mode if you want to
change the recording quality (see
Recording Mode on page 84).
• The Copy List will be erased if:
– any of the titles on the DVD disc are
erased or edited.
– the disc tray is opened.
– playback is switched between Play List
and Original.
– the DVD disc is re-initialized or
finalized.
– the recorder is reset to its factory
settings (see Resetting the recorder on
page 136).
• Select Input Disc Name if you want to
change the disc name. Input a name of
up to 64 characters for a VR mode disc or
40 characters for a Video mode disc or
DVD+R/+RW. (The input method is
similar to that of naming titles; see Title
Name on page 70.)
Note
83
En
1 If a timer recording is scheduled to start during copying, the disc will not be finalized.
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying and backup
09
• It may not be possible to copy from a
DVD disc that was recorded on a
different DVD recorder or a PC.
Repeat this step for as many titles you have
that need editing.
ENTER
HOME
MENU
7
Select ‘Next’ from the
1
Select ‘Copy’ from the Home
command menu panel to proceed to the
copy options screen.
Menu.
• Select Recording Mode if you want to
change the recording quality (see
Recording Mode below).
ENTER
2
3
Select ‘DVD/CD HDD’.
ENTER
ENTER
Select a Copy List type.
8
Select ‘Start Copy’ to start
• Selecting Create New Copy List will
erase any Copy List already stored in the
recorder.
copying.
Recording Mode
ENTER
ENTER
4
Add titles to the Copy List
1
Select ‘Recording Mode’ from
(highlight a title and press ENTER to add).
Titles you’ve added to the Copy List are
highlighted in pink.
the command menu panel.
ENTER
2
Select a recording mode for
ENTER
the copy.
5
Select ‘Next’ from the
1
• High-Speed Copy – The Copy List is
copied at the same recording quality as
the original.
command menu panel to proceed to the
title edit screen.
2
• XP, SP, LP, EP, SLP, SEP, MN – The Copy
ENTER
List is copied at the specified recording
quality in real-time. (Note that if you copy
at a higher quality setting than the
original, the copy will not be better
quality than the original.)
6
Select a title to edit.
A menu appears of Copy List editing
commands:
• Erase – Erase individual titles from the
Copy List (see Erase on page 69).
If you select MN above, you can also
• Move – Change the order of titles in the
Copy List (see Move on page 75).
change the level setting (MN1 to
3
4
MN32 , LPCM or XP+ ) from the
• Preview – Check the content of a title in
the Copy List.
Recording Quality box that appears.
• Cancel – Exit the menu.
Note
1 When copying to a DVD-R/-RW (Video mode) or DVD+R/+RW, the chapter markers in the copy may not be in
exactly the same position as the original.
2 When the copy mode is set to something other than High-Speed Copy for copying to a DVD-R/-RW (Video mode)
or DVD+R/+RW, the chapter markers of the original are not copied. Chapter markers are put into the copy at
regular intervals, according to the Auto Chapter setting (see also Auto Chapter (Video) and Auto Chapter
(DVD+R/+RW) on page 114).
3 When copying to a DVD+R/+RW, MN1 to MN3 and SEP modes are not available.
4 XP+ mode available only when copying to HDD.
84
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying and backup
09
1,2
• Optimized – The recording quality is
ENTER
automatically adjusted so that the Copy
List fits on to the space available on the
disc. Copying is carried out in real-time.
2
Select a backup option.
Start new disc back-up
Resume writing data
Erase back-up data
When you change the recording mode
setting, you can see how much disc space it
will require. If this is more than is available,
it shows up in red and you won’t be able to
start copying. In this case, either change the
recording quality, or press RETURN to go
back to the Copy List screen and erase one
or more titles from the Copy List.
There are three backup options:
• Start new disc back-up – Start making
a backup of a disc.
• Resume writing data – Record the
backup data already on the HDD to a
recordable DVD.
Dual Mono Audio/Bilingual
• Erase back-up data – Erase the backup
data on the HDD.
1
Select the title containing the
audio you want to change.
3
Load the disc you want to make a
backup of.
You can only make backup copies of
finalized Video mode DVD-R/-RW discs,
finalized DVD+R or DVD+RW discs
(excluding DVD-R DL/DVD+R DL discs).
ENTER
2
Select ‘Dual Mono Audio/
Bilingual’ from the command menu
panel.
Disc Back-up
ENTER
No disc.
3
Select a dual mono audio/
Please load a disc to be backed-up.
bilingual option.
Cancel
Start
Using disc backup
ENTER
* See also Copyright on page 79.
4
Select ‘Start’.
This feature offers a simple way to make a
backup copy of finalized DVD-R/-RW (Video
mode) discs or DVD+R/+RW discs. The
Disc Back-up
Read from disc and save to HDD.
Start reading?
3
data is copied first to the hard disk drive ,
then on to another recordable DVD disc.
Cancel
Start
HOME
MENU
• To see the progress of the backup, press
DISPLAY.
1
Select ‘Copy’, then ‘Disc backup’
from the Home Menu.
Note
1 When the copy mode is set to something other than High-Speed Copy for copying to a DVD-R/-RW (Video mode)
or DVD+R/+RW, the chapter markers of the original are not copied. Chapter markers are put into the copy at
regular intervals, according to the Auto Chapter setting (see also Auto Chapter (Video) and Auto Chapter
(DVD+R/+RW) on page 114).
2 Optimized mode only available when copying to DVD. Due to remaining space on the disc or the title that you
copy, this mode does not always exactly fill a disc.
3 It is not possible to play this material directly from the HDD.
85
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying and backup
09
• You can cancel the backup process by
pressing ONE TOUCH COPY for more
than one second.
are using a DVD-RW or DVD+RW disc
you can re-initialize it in order to make it
usable again — see Initializing recordable
DVD discs on page 49.)
5
When the data has been copied, take
out the disc and load a blank* recordable
DVD.
* If you’re using a DVD-RW or DVD+RW, the
disc doesn’t have to be blank, although the
previous contents of the disc will be erased in
the backup process.
7
After the recorder has finished
recording the backup disc, you can select
whether to make another backup of the
same data or exit.
Disc Back-up
Disc back-up finished.
To make another back-up copy, please load
a recordable disc.
Disc Back-up
Disc content saved to Hard Disk Drive.
Please eject the disc and load a
recordable disc
Cancel
Start
• Select Start to make another backup
copy or Cancel to finish. If you want to
make another backup copy, return to
step 6 above.
Cancel
Start
You can use a DVD-R ver. 2.0, 2.1 or 2.2 disc,
or DVD-RW ver. 1.1 or ver. 1.2 disc for the
backup.
8
If you don’t need to keep the backup
data on the HDD, you can delete it now.
Select Yes to delete the data from the HDD;
select No to keep it (you can delete it later if
you want to).
• If you backup a DVD-R disc to DVD-RW,
you cannot undo the finalization later.
• Actual recordable capacity of discs vary
so there may be cases where the
contents of the disc you’re backing-up
will not fit on to a particular blank disc. If
this happens, please try another brand of
disc.
Disc Back-up
The backed-up data is still on the HDD.
Erasing it will increase the free space
available. OK to Erase?
No
Yes
• DVD-R/-RW discs can only be backed up
to DVD-R/-RW discs; DVD+R/+RW
discs can only be backed up to DVD+R/
+RW discs.
• If you decide to leave the backup data on
the HDD, you can make backup copies
to recordable DVD discs anytime from
the Disc Back-up menu.
6
Select ‘Start’ to start writing the
backed-up data to the blank disc.
Disc Back-up
Write back-up data from Hard Disk Drive.
The disc contents will be overwritten.
OK to start?
Cancel
Start
• To see the progress of the backup, press
DISPLAY.
• You can cancel the backup process by
pressing ONE TOUCH COPY for more
than one second. However, this will
make the disc unusable (although if you
86
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Jukebox
10
Chapter 10
Using the Jukebox
The Jukebox feature allows you to use the
recorder’s HDD to store and playback music
from your CDs. You can also transfer WMA/
MP3 files stored on CD-R/-RW/-ROM, DVD,
USB device or PC.
4
Display the command menu.
The command menu panel
Disc Navigator (DVD/CD)
Track List
Track 01
10 Tracks
Play
Copying music to the HDD
1
2
3
4
5
6
7
8
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Track 08
CD
Edit
The first step is to copy some music to the
HDD. CD audio, WMA and MP3 files are
copied at high speed.
Play Mode
Usually, each track on a CD or DVD is
Track 01
0.04.30 / 1.14.00
650MB
(None)
HDD
categorized and copied onto the HDD on the
basis of information on artists and albums.
Track 03
Track Repeat
0.05.30
10.00.00
Remain
100.0
G
Stereo
3
1
Note that once copied to the HDD, audio
tracks cannot be copied to a recordable DVD
disc.
ENTER
5
6
Select ‘Edit’ from the menu.
Select ‘Copy all to HDD’ from
ENTER
Important
the menu.
On pressing ENTER all tracks (or files) on the
CD are copied to the HDD.
• While copying, no other recorder
operation is possible.
• When copying, scheduled timer
recordings will not start until copying is
complete.
• When a folder of WMA/MP3 files is
selected, you can copy only the files
contained in the folder by using Copy to
HDD.
• Copy protected CDs may not copy
successfully.
• You can also copy tracks (or files) by
selecting Copy > DVD/CD HDD and
pressing ENTER from the Home Menu.
• You can also start copying by starting
playback of the CD/DVD and then
pressing ONE TOUCH COPY.
1
Load the CD/DVD you want to copy
to the HDD.
2
Select the DVD.
DVD
DISC NAVIGATOR
3
Open the Disc Navigator.
• To cancel copying press ENTER.
• If the CD loaded contains both CD audio
tracks and WMA/MP3 files, the part
currently selected will copy.
Note
1 • Up to 50 000 tracks can be created in the Jukebox. (You can create up to 50 000 artists/albums in total.)
• Sound quality is not worsened when you copy data from another source.
• When playing back an album copied from a source whose original audio track plays continuously (such as a
live recording), there will be a brief pause in sound between tracks.
• WMA/MP3 files are classified according to the information included in the files. Track names may differ from
the names of the original files.
• Depending on the name of the original folder and track, the artist and album under which the folder or track
is classified may differ.
87
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Jukebox
10
Copying files via USB
ENTER
2
Load the next batch of up to 999
files/99 folders from the connected USB
device.
It takes several minutes to reload files.
Connecting a regular USB device
You can copy WMA or MP3 files from a
connected USB device, such as a USB drive,
to the HDD.
1
Connect PC
Using a USB connection, you can copy
WMA and MP3 files from a PC to the HDD of
this device. Operations carried out on the PC
require Windows Media Player 11.
1
Connect the USB device.
HOME
MENU
2
Select ‘Jukebox’ from the Home
Menu.
3
Important
ENTER
• If the PC you are using does not currently
have Windows Media Player 11 installed,
you must first install the program and
make sure it functions correctly before
connecting the USB cable and
attempting to use the Connect PC
function.
Select ‘Listen to Music from
USB device’.
4
5
6
Display the command menu.
ENTER
• For more information on Connect PC,
see Using a PC on page 24.
Select ‘Edit’ from the menu.
Select ‘Copy all to HDD’ from
• You cannot edit or delete albums from
this device when it is connected to a PC
via USB. If you wish to edit or delete
albums via the Jukebox, you must first
disconnect the USB cable.
ENTER
the menu.
The folders on the USB device will be copied
to the HDD.
1
Connect the PC via USB cable.
• Up to 99 folders/999 files on the USB
device can be copied/displayed.
The screen below is displayed. Press ‘’ to
close the screen.
• Only the files that have been read can be
copied. To copy the files that have not
been read, reload the files (see below).
• To copy specific folders, select the
desired folders and select Copy to HDD.
Reloading files from a USB device
If you have a USB device with more than
1000 files and/or 100 folders, you can still
view all the tracks using the reload function.
1
Navigate to the last entry in
the folder list (‘Read next: ...’).
Note
88
En
1 You can press HOME MENU to exit the Jukebox screen while the recorder is reloading files.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Jukebox
10
*Depending on the Windows OS version and
the Windows Media Player settings, the
screen shown below may not be displayed.
6
Open Windows Media Player 11 on
the PC.
The device settings screen appears. Click
‘Cancel’.
*Depending on the settings for Windows
Media Player 11, the screen shown below
may not be displayed.
HOME
MENU
2
Select ‘Jukebox’ from the Home
Menu.
‘Cancel’
From the PC, in Windows Media Player 11:
ENTER
1. Click ‘Sync’.
3
Select ‘Connect PC’.
2. Choose the artist, album or song
you would like to copy, and press the
right mouse button.
ENTER
4
Select ‘Yes’ to confirm or ‘No’
3. Click ‘Add to Sync list’.
4. Click ‘Start Sync’.
to cancel.
5
Verify that the import screen is
displayed on the device.
If no actions are carried out for 20 minutes,
the import screen is automatically closed. To
reopen it, you will have to repeat steps 2
through 4.
This begins the synchronization process.
When finished, the message ‘Synchronized
to Device’ is displayed in Windows Media
Player 11.
Number of copied
folders
Number of files
unable to be copied
Status
Connect PC
Standby
00000 Folders
000000 Files
( 000 error
( 000 error
)
)
Exit
Number of copied files
‘Start Sync’
89
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Jukebox
10
For more information refer to the Help menu
of Windows Media Player 11.
• Up to 50 000 tracks can be included in
one album. (The total number of tracks
allowed in Jukebox is 50 000.) Note that
when there are many tracks contained in
one album, it may take time to display
and transfer these tracks.
Progress Bar
Connect PC
Copying
• Artists, albums and tracks with no set
name that are transferred from CD/DVD/
USB are displayed as ‘Unknown Artist’,
‘Unknown Album’ and ‘Unknown File’ in
Windows Media Player 11.
00001 Folders
000003 Files
( 000 error
( 000 error
)
)
Exit
• To cancel the synchronization process
while it is underway, press ENTER on the
remote control. The Connect PC screen
is closed.
• Artists, albums and track names that do
not conform to the ISO8859-1 standard
may display differently in Windows
Media Player 11 and the Jukebox.
• If synchronization fails, make sure that
the Pioneer. HDD/DVD-Recorder device
is selected at the synchronization screen
of Windows Media Player 11, and try
again.
• File whose extensions are not supported
by the Jukebox (i.e. files that are not
.mp3 or .wma) cannot be transferred.
• Files imported to this recorder via
Connect PC cannot be exported from
this recorder.
7
When you have finished copying
files, close Windows Media Player 11 on
the PC.
• Note that no recording functions,
including timer recordings, will be
carried out when you are using the
Connect PC function.
ENTER
8
Close the import screen on this
device.
• If no actions are carried out for
20 minutes after copying, the import
screen is automatically closed.
Playing music from the
Jukebox
Note
You can select artists, albums or individual
tracks from the Jukebox to play.
• When using the sync function of
Windows Media Player 11, music, artist
and album folders are created as
follows:
HOME
MENU
1
Select ‘Jukebox’ from the Home
Root
Menu.
ENTER
music1.mp3
music2.mp3
Music
Artist 1
Album 1
2
Select a Jukebox option.
• Listen to Music/Edit – Listen to CDs or
WMA/MP3 files that have been copied to
the HDD.
music1.wma
Album 2
Album 1
• Listen to Music from USB device –
Listen to music from an external USB
device. Proceed to step 4.
music1.mp3
Artist 2
• The above music folder is not displayed.
90
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Jukebox
10
ENTER
3
Select the artist you want to
6
Display the command menu.
play back.
Jukebox HDD
Track List
The screen below shows artists stored on the
HDD:
10 Tracks
ALL
Play
1
2
3
4
Track1
Track2
Track3
Track4
Erase
Edit
Track
Jukebox HDD
Repeat
Artist List
ALL
10 Artists
Add to Play List
Original
5
Track5
Track6
Track7
Play List Name
1
2
3
4
Artist1
Artist2
Artist3
Artist4
6
7
Artist
Track1
HDD
MP3
8GB
MENU
classical
Original
Remain
100.0
5
6
7
Artist5
Artist6
Artist7
G
Artist1
HDD
Total 10
ENTER
Remain
100.0
G
7
Select ‘Play’ from the menu.
The album display changes for the selected
artist when you press ENTER.
Repeat play
• This step is for the display mode set to
Artist. The operation varies when the
display mode is set to other settings.
1
Display the command menu
• To play back all artists, select All and
during playback.
proceed to step 6.
ENTER
• Press SUBTITLE or ANGLE to change
the page.
2
Select ‘Repeat’ from the
menu.
• Select Play Mode when audio files
stored on a USB device are being played
back (see The Play Mode menu on
page 58).
ENTER
4
Select the album you want to
play back.
Press ENTER to change the track display for
the selected album.
ENTER
• To play back all albums, select All and
proceed to step 6.
3
Select a repeat function from
the command menu panel.
• Repeat Artist – Repeats all tracks of an
artist being played back.
5
Select the track you want to
play back.
• To play back all tracks, select All.
• Repeat Album – Repeats all tracks of an
album being played back.
• Repeat Track – Repeats the track being
played back.
• Repeat Off – Cancels repeat playback.
91
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Jukebox
10
Playing your favourite music (Play
ENTER
List)
3
Select a play list (‘Play List 1’
You can collect and play back only your
favourite songs stored on the HDD.
to ‘Play List 4’) you want to play back.
Creating a play list
4
5
Display the command menu.
Select ‘Play’ from the menu.
ENTER
ENTER
1
Select a track you want to add
to a play list.
Changing the display style of
the Jukebox
2
3
Display the command menu.
ENTER
Select ‘Add to Play List’ from
ENTER
the menu.
1
Select an artist/album you
want to change the display for.
ENTER
4
Select a play list (‘Play List 1’
to ‘Play List 4’) where you want to add
the selected track.
• You can add up to 25 songs to a play list.
2
Display the view options
panel.
• You can rename a play list (see Editing
the HDD Jukebox on page 93).
Jukebox HDD
Artist List
10 Artists
Display Mode
Artist1
Artist2
Artist3
Artist4
Artist
Playing a play list
Play List
Original
MENU
Artist5
Artist6
Artist7
1
Display the view options
Artist1
HDD
Total 10
panel.
Remain
100.0
G
The view options panel
ENTER
Jukebox HDD
Artist List
10 Artists
3
Select a view option.
Display Mode
• Display Mode
Artist1
Artist2
Artist3
Artist4
Artist
Play List
Original
By artist – Displays the artists copied
onto this unit from the earliest date.
MENU
Artist5
Artist6
By album – Displays the albums of the
selected artist. When you select All,
albums of all artist are displayed.
Artist7
Artist1
HDD
Total 10
Remain
100.0
G
By track – Displays the tracks of the
selected artist/album. When you select
All, tracks of the all artist/album are
displayed.
ENTER
2
Select ‘Play List’.
92
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Jukebox
10
• Play List
Editing the HDD Jukebox
Original – Displays the settings of
Display Mode (By artist).
A number of commands are available for
editing and changing the playback behavior
of albums.
Play List 1 to Play List 4 – Displays the
tracks added to each play list.
HOME
MENU
Favourites – Displays up to 25 tracks
you listen to most frequently.
1
Select ‘Jukebox’ from the Home
Menu.
Copying albums/tracks
ENTER
ENTER
ENTER
You can copy the albums stored on the HDD
to other folders of a different artist on the
HDD. Also, you can copy the tracks stored
on the HDD to other albums on the HDD.
2
3
4
Select ‘Listen to Music/Edit’.
Select what you want to edit.
Select an edit function from
• You cannot copy the albums/tracks
stored on the HDD to a DVD or a USB
device.
the command menu panel.
HOME
MENU
• Erase – Deletes the selected artist/
1
1
Select ‘Jukebox’ from the Home
album/track.
Menu.
• Edit > Artist name – Enter a name of up
to 64 characters for the artist. See Title
Name on page 70 for how to enter
names.
ENTER
2
Select ‘Listen to Music/Edit’.
Select an album/track you
• Edit > Album name – Enter a name of
up to 64 characters for the album. See
Title Name on page 70 for how to enter
names.
ENTER
3
want to copy.
• Edit > Track name – Enter a name of up
to 64 characters for the track. See Title
Name on page 70 for how to enter
names.
ENTER
4
Select ‘Edit’ > ‘Copy Album’ or
‘Copy Track’ from the command menu.
• Play List name – Enter a name of up to
12 characters for the Play List. See Title
Name on page 70 for how to enter
names.
ENTER
5
Select an artist/album you
want to copy the selected album/track
to.
Select New Artist or New Album if you
want to create a new artist/album. The name
of an artist/album becomes A_number/
A_number_F_number.
ENTER
6
Select ‘Yes’ to confirm or ‘No’
to cancel.
Note
93
En
1 Some time may be required to erase artists or albums if they include many tracks.
Download from Www.Somanuals.com. All Manuals Search And Download.
The PhotoViewer
11
Chapter 11
The PhotoViewer
From the PhotoViewer you can view JPEG
photos and picture files stored on the HDD,
ENTER
3
Select the folder containing
recordable DVD or CD-R/-RW/-ROM, or on a
1
the files you want to view, copy or edit.
The first image from the selected folder is
displayed as thumbnail at the bottom of the
screen. From the Folder Information column,
you can change thumbnails via the
USB-equipped digital camera. You can also
import files and save them to the recorder’s
HDD or a DVD-R/-RW disc.
Important
REV SCAN/ FWD SCAN buttons.
• Unless otherwise stated, the OSDs shown
in this manual are for the Taiwan and
Philippines model.
Currently selected
folder in folder list
PhotoViewer HDD
Locating JPEG picture files
Select Folder
001 Folder1
002
003
004
005
Folder2
Folder3
Folder4
Folder5
HOME
MENU
Folder
1
Select ‘PhotoViewer’ from the
FOLDER
MENU
006 Folder6
Home Menu.
007
008
Folder7
Folder8
HDD
002 Folder2
Files
Folder
ENTER
999
Remain
100.0
999 MB
1/3
G
2
Select the location of the files
Pages in
folder list
you want to view or edit.
Folder information
View/Edit Photos on the HDD
View Photos on a CD/DVD
4
Select the file you want to
View Photos on a USB Device
Copy Files from a Digital Camera
view, copy or edit.
Currently selected
thumbnail
• View/Edit Photos on the HDD – View
or edit photos already stored on the
recorder’s HDD.
PhotoViewer HDD
Folder2
Folder Size 999 MB
001 PIOR0000
002 PIOR0001
003 PIOR0002
• View Photos on a CD/DVD – View
photos on a Fujicolor CD, CD-ROM,
CD-R/-RW, or DVD-R/-RW.
File
004 PIOR0003
005 PIOR0004
FILE
MENU
12 Files
006 PIOR0005
007 PIOR0006
008 PIOR0007
009 PIOR0008
• View Photos on a USB Device – View
photos on a digital camera (or other USB
device) connected to the USB port.
010 PIOR0009
011 PIOR0010
HDD
012 PIOR0011
Remain
1/84
100.0
G
• Copy Files from a Digital Camera –
Copy all DCF files directly from a
connected digital camera to a
recordable DVD-R/-RW.
Pages in
file list
Note
1 Up to 999 files or 99 folders are viewable, but if there are more files/folders than this on the disc or connected
USB camera it is still possible to view them all using the Reload function (see Reloading files from a disc or USB
device on page 96).
94
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The PhotoViewer
11
• The larger the file size, the longer it takes
the recorder to load the file.
ENTER
3
Choose a view option, then
• You can change folders via the
REV SCAN/ FWD SCAN
buttons.
press ENTER.
The display mode will change to that which
you have chosen.
• If you encounter a disc that will not play,
check that the disc and file formats are
compatible with this recorder (see JPEG
file compatibility and PC-created disc
compatibility on page 11).
Playing a slideshow
ENTER
• The thumbnail of files that cannot be
1
list.
Select a folder from the folder
played is displayed as the
logo.
To start the slideshow from the first file in the
folder, skip to step 3 after choosing the
desired folder and pressing .
Changing the display style of
the PhotoViewer
You can choose to display photos by
grouping them by folder, file, or number of
thumbnails.
2
Select a thumbnail.
• Use PREV/ NEXT to display the
previous/next page of thumbnails.
1
Display the view options
ENTER
panel.
3
Select ‘Start Slideshow’ or
‘Start Audio Slideshow’ from the menu.
When Start Audio Slideshow is selected,
you can enjoy the slideshow while playing
back music in Jukebox. Press / to
select the desired play list or Favourites that
contains the songs you want to play back
and then press ENTER.
The view options panel
PhotoViewer HDD
Folder2
Folder Size 999 MB
PIOR0000
Display Mode
PIOR0001
PIOR0002
PIOR0003
PIOR0004
PIOR0005
PIOR0006
PIOR0007
PIOR0008
010 PIOR0009
011 PIOR0010
012 PIOR0011
File
Style
12 Files
FILE
MENU
For more information on adding music to the
HDD, see Using the Jukebox on page 87.
HDD
• You can also select a file or folder then
press PLAY to start playing the
slideshow.
Remain
100.0
1/84
G
ENTER
• Use PREV/ NEXT to display the
previous/next picture, or PAUSE to
pause the slideshow.
• Depending on the aspect ratio, some
pictures may be displayed with black
bars top and bottom, or left and right.
2
Choose ‘Display Mode’ or
‘Style’ then press ENTER to see the
available view options.
• Display Mode – Choose between folder
and file display modes.
• Style – Choose between displays of 1, 4
and 12 thumbnails.
• Large picture files may take a few
seconds to display. This is normal.
95
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The PhotoViewer
11
STOP
ENTER
2
Load the next batch of up to 999
files/99 folders from the disc or
connected USB device.
4
5
Press to return to the thumbnail.
• You can also use the RETURN button.
HOME
MENU
It will take a moment (at most a few minutes)
1
Press to exit the PhotoViewer.
to load in the images.
Zooming an image
Importing files to the HDD
During a slideshow you can zoom in to
enlarge a portion of the picture by a factor of
two or four. You can also move the area of
the picture displayed.
You can import files and save them to the
2
HDD from a CD, DVD or a connected USB
camera. Once on the HDD you can edit and
organize your pictures and print them out if
you’ve connected a PictBridge-compatible
printer.
ENTER
1
Press during the slideshow to
zoom the picture.
Repeated presses cycle between zoom off,
2x zoom and 4x zoom. The zoom factor is
displayed on-screen.
ENTER
1
Select the location of folders/
files you want to import.
To import a whole folder, select the desired
folder, press , and skip to step 3 below.
2
Use to move the zoomed
area.
• To import multiple folders, use the Multi-
Mode; see Selecting multiple files or
folders on page 97.
Rotating an image
You can rotate the displayed picture during a
slideshow so you can always view pictures the
right way up, whichever way they were taken.
2
Select a file to import, then
press .
ANGLE
•
Press during the slideshow to
• To import multiple files, use the Multi-
Mode; see Selecting multiple files or
folders on page 97.
rotate the displayed picture clockwise by
90º.
Press repeatedly to continue rotating the
picture in increments of 90º.
ENTER
3
Select ‘Copy to HDD’ from the
menu.
Reloading files from a disc or
USB device
PhotoViewer CD/DVD
Folder2
Folder Size 999 MB
Start Slideshow
001 PIOR0000
002 PIOR0001
If you have a disc with more than 1000 files
and/or 100 folders, you can still view all the
images using the reload function.
Copy all to HDD
Copy to HDD
File
003 PIOR0002
004 PIOR0003
005 PIOR0004
006 PIOR0005
007 PIOR0006
008 PIOR0007
009 PIOR0008
010 PIOR0009
011 PIOR0010
012 PIOR0011
Print
Detailed Information
12 Files
Multi-Mode
HDD
1
Navigate to the last entry in
Remain
100.0
1/84
G
the folder list (‘Read next: ...’).
Note
1 You can press HOME MENU to exit the PhotoViewer screen while the recorder is reloading images. (If you enter
the PhotoViewer again, it will resume reloading.)
2 For files you want to keep permanently, we recommend backing up to DVD-R/-RW.
96
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The PhotoViewer
11
ENTER
ENTER
4
Select ‘Yes’ to confirm and
4
Select files/folders from the
copy the folder(s)/file(s), or ‘No’ to
cancel.
• The files will be copied to the HDD with
the same folder structure as the original.
list.
An orange check mark box () is shown by
the item you selected. A blue check mark
box () appears on the folder select screen
when files from that folder are selected.
• Importing to the HDD will not work if
there is insufficient space on the HDD,
or if there are already the maximum
number of files and/or folders on the
HDD (999 folders/999 files per folder).
PhotoViewer HDD
Multi-Mode
Select Folder
001 Folder1
002
003
004
0
Folder2
Folder3
Folder4
Folder5
Folder
FOLDER
MENU
006 Folder6
Selecting multiple files or
folders
007
008
Folder7
Folder8
HDD
002 Folder2
Files
Folder
999
999 MB
Remain
100.0
1/3
The Multi-Mode allows you to select multiple
folders/files at once for importing or editing.
G
5
6
Display the command menu.
Select the command you want
ENTER
1
Select the folder containing
ENTER
the files you want to import.
to apply to all the selected items.
2
Display the command menu.
Copying files to a DVD-R/-RW
ENTER
1
Using this feature you can copy all the files
3
Select ‘Multi-Mode’ from the
(including audio and movie files) stored on a
connected USB camera to a recordable DVD
disc.
menu.
PhotoViewer HDD
Select Folder
001 Folder1
A slideshow of the files is also recorded on
the disc as a Video mode title, making it
possible to view the photos on other DVD
players/recorders that may not be
Start Slideshow
Start Audio Slideshow
New Folder
002
003
004
005
Folder2
Folder3
Folder4
Folder5
Folder
Folder Options
Copy to DVD
Multi-Mode
006 Folder6
007
008
Folder7
Folder8
compatible with JPEG file playback.
Once the files have been copied, the disc is
automatically finalized.
HDD
G
002 Folder2
Files
Folder
999
999 MB
Remain
100.0
1/3
Note
1 • There is a limit to the number of files/amount of data that you can copy at one time.
• Only DCF format files in DCIM folders can be copied to a recordable DVD-R/-RW.
97
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The PhotoViewer
11
(copying selected files doesn’t automatically
finalize the disc).
Important
• Use a blank DVD-R/-RW disc, or one that
has already been initialized for Video
mode recording but has nothing yet
recorded on it. Discs that have already
been recorded on (as well as CD-R/-RW
discs) cannot be used.
Important
• A maximum of 99 slideshow titles can be
recorded.
• One slideshow title can contain up to
99 files. If there are more files than this in
the slideshow, multiple slideshows are
created on the disc.
• After backing up the pictures in your
digital camera to DVD, we recommend
verifying that they have been recorded
properly before deleting anything from
the camera.
• If you erase a slideshow title from a DVD
the slideshow will become unplayable
but the free space will not increase.
1
Press HOME MENU and select
‘PhotoViewer’ to display the
PhotoViewer screen.
1
Load a blank (or unfinalized Video
mode) DVD-R or DVD-RW disc.
2
Load a blank (or unrecorded Video
ENTER
mode) DVD-R or DVD-RW disc.
2
Select ‘View/Edit Photos on
the HDD’ from the menu.
ENTER
3
Select ‘Copy Files from a
ENTER
Digital Camera’ from the menu.
3
Select the file(s) or folder(s)
you want to copy.
• Copying a folder will copy all the files
contained in it.
View/Edit Photos on the HDD
View Photos on a CD/DVD
View Photos on a USB Device
Copy Files from a Digital Camera
• To copy multiple folders, use the Multi-
Mode; see Selecting multiple files or
folders on page 97.
ENTER
ENTER
4
Select ‘Yes’ to confirm or ‘No’
4
Select ‘Copy to DVD’ from the
to cancel.
menu.
• Note that during copying, any timer
programmes set to start will not begin,
and no other operations are possible.
ENTER
5
Select ‘Yes’ to confirm or ‘No’
to cancel.
Copying selected files to a
DVD-R/-RW
• Folder names on the disc will be
number PIONR. File names will be
PHOT number.
This feature allows you just to copy some of
the files stored on HDD to a DVD.
• Note that during copying, any timer
programmes set to start will not begin,
and no other operation is possible.
A slideshow of the files is also recorded on
the disc as a Video mode title, making it
possible to view the photos on other DVD
players/recorders that may not be
• While ‘Cancel’ is displayed, you can
press ENTER to cancel.
compatible with JPEG file playback. Note
however that you may need to finalize the
disc before it will play on another DVD player
98
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The PhotoViewer
11
Editing files on the HDD
ENTER
3
Select ‘File Options’ or ‘Folder
There are a number of commands you can
use to edit and organize your pictures stored
on the HDD.
Options’.
PhotoViewer HDD
Folder2
Folder Size 999 MB
Start Slideshow
Creating a new folder
001 PIOR0000
002 PIOR0001
003 PIOR0002
004 PIOR0003
005 PIOR0004
006 PIOR0005
007 PIOR0006
008 PIOR0007
009 PIOR0008
010 PIOR0009
011 PIOR0010
012 PIOR0011
Start Audio Slideshow
File Options
Print
File
Copy to DVD
12 Files
Detailed Information
Multi-Mode
1
From the folder list, display
the menu.
HDD
Remain
1/84
100.0
G
ENTER
2
Select ‘New Folder’.
The folder appears at the bottom of the folder
list with the name F_number.
ENTER
4
Select ‘Erase’ or ‘Erase Folder’.
PhotoViewer HDD
Select Folder
PhotoViewer HDD
Folder2
Folder Size 999 MB
001 Folder1
Start Slideshow
001 PIOR0000
Erase
Copy
002
003
004
005
Folder2
Folder3
Folder4
Folder5
Start Audio Slideshow
New Folder
002 PIOR0001
003 PIOR0002
004 PIOR0003
005 PIOR0004
006 PIOR0005
007 PIOR0006
008 PIOR0007
009 PIOR0008
010 PIOR0009
011 PIOR0010
012 PIOR0011
Folder
File
Rename File
Folder Options
Lock
Copy to DVD
Multi-Mode
12 Files
006 Folder6
007
008
Folder7
Folder8
Cancel
HDD
002 Folder2
Files
Folder
HDD
999
999 MB
Remain
100.0
Remain
100.0
1/3
1/84
G
G
• There can be up to 999 folders on the
HDD.
ENTER
5
to cancel.
Select ‘Yes’ to confirm or ‘No’
Erasing a file or folder
• You can also erase a file or folder by
pressing CLEAR when the file or folder is
highlighted. Press ENTER to confirm.
1
Select the file(s) or folder(s)
you want to erase.
Copying files
• To erase multiple files or folders, use the
Multi-Mode; see Selecting multiple files
or folders on page 97.
1
Select the file(s) or folder(s)
• Erasing a folder will erase all the files
contained in it. Please be careful!
you want to copy.
• Copying a folder will copy all the files
contained in it.
• You can’t erase files that have been
locked.
• To copy multiple files or folders, use the
Multi-Mode; see Selecting multiple files
or folders on page 97.
• Folders containing locked files can’t be
erased. Unlocked files in the folder,
however, will be erased.
2
Display the command menu.
2
Display the command menu.
99
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The PhotoViewer
11
ENTER
ENTER
3
Select ‘File Options’ or ‘Folder
4
Select ‘Rename File’ or
Options’.
‘Rename Folder’.
PhotoViewer HDD
Folder2
ENTER
Folder Size 999 MB
4
Select ‘Copy’ or ‘Copy Folder
001 PIOR0000
002 PIOR0001
003 PIOR0002
Erase
Copy
Contents’.
File
Rename File
004 PIOR0003
005 PIOR0004
Lock
PhotoViewer HDD
Folder2
12 Files
006 PIOR0005
007 PIOR0006
008 PIOR0007
009 PIOR0008
010 PIOR0009
011 PIOR0010
012 PIOR0011
Folder Size 999 MB
Cancel
001 PIOR0000
002 PIOR0001
003 PIOR0002
004 PIOR0003
005 PIOR0004
006 PIOR0005
007 PIOR0006
008 PIOR0007
009 PIOR0008
010 PIOR0009
011 PIOR0010
012 PIOR0011
Erase
Copy
File
HDD
Rename File
Remain
100.0
1/84
Lock
G
12 Files
5
Enter a new name for the file/folder.
File names or Folder names can be up to 64
characters long.
Cancel
HDD
Remain
1/84
100.0
G
See Using the remote key shortcuts to input
a name and Using a USB keyboard to enter a
name on page 71 for how to enter a name.
ENTER
5
Select a folder to copy the
folder(s)/file(s) to.
Locking/Unlocking files
Locking files will protect them from
accidental erasure and prevent them from
being renamed.
ENTER
6
Select ‘Yes’ to confirm or ‘No’
to cancel.
Use the same process to both lock and
unlock files. Locked files are displayed in the
PhotoViewer with a padlock icon.
• Copying to the HDD will not work if there
is insufficient space on the HDD; if there
are already the maximum number of
files and/or folders on the HDD.
1
Select the file(s) you want to
Naming files and folders
lock (or unlock).
• To lock/unlock multiple files or folders,
use the Multi-Mode; see Selecting
multiple files or folders on page 97.
1
Select the file or folder you
want to rename.
You can’t rename files that have been locked.
2
3
Display the command menu.
Select ‘File Options’ or ‘Folder
2
Display the command menu.
Select ‘File Options’ or ‘Folder
ENTER
ENTER
Options’.
3
Options’.
100
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The PhotoViewer
11
ENTER
4
Select ‘Lock’ or ‘Lock Folder
2
3
Display the command menu.
Select ‘Print’ from the menu.
Contents’.
ENTER
PhotoViewer HDD
Folder2
Folder Size 999 MB
001 PIOR0000
002 PIOR0001
003 PIOR0002
004 PIOR0003
005 PIOR0004
006 PIOR0005
007 PIOR0006
008 PIOR0007
009 PIOR0008
010 PIOR0009
011 PIOR0010
012 PIOR0011
Erase
Copy
PhotoViewer HDD
Folder2
File
Folder Size 999 MB
Start Slideshow
Rename File
Lock
001 PIOR0000
12 Files
002 PIOR0001
003 PIOR0002
004 PIOR0003
005 PIOR0004
006 PIOR0005
007 PIOR0006
008 PIOR0007
009 PIOR0008
010 PIOR0009
011 PIOR0010
012 PIOR0011
Start Audio Slideshow
File Options
Print
File
Cancel
Copy to DVD
12 Files
Detailed Information
Multi-Mode
HDD
Remain
100.0
1/84
G
HDD
Locked files are shown with a padlock icon
next to them. To remove all locks within a
given folder, choose ‘Folder Option’ >
‘Unlock Folder Contents’.
Remain
100.0
1/84
G
ENTER
4
Select ‘Start’ to confirm or
To view detailed information
This feature allows you to check the settings
of the camera from which you imported the
photos.
‘Cancel’ to cancel.
• Once printing has started, you can
cancel by pressing ENTER.
Tip
1
Choose the file for which you would
like to see detailed information.
Choose ‘Detailed Information’.
• Paper size and layout can be set; the
options available depend on your printer
— check the printer manual for details.
2
When no detailed information is available,
nothing is displayed.
• This recorder may not work correctly
with all printers.
Printing files
Connecting a PictBridge-compatible printer
to the USB port will enable you to print out
1
picture files stored on the HDD, a CD/DVD
or directly from a digital camera.
Make sure that the printer (and your digital
camera if you are using that as a source) is
connected to the recorder before starting.
1
Select the file(s) you want to
print.
• To print multiple files, use the Multi-
Mode; see Selecting multiple files or
folders on page 97.
Note
101
En
1 Picture files should be standard DCF format. Non-standard files may not print properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
The Disc Setup menu
12
Chapter 12
The Disc Setup menu
From the Disc Setup menu you can name
discs, lock the contents to prevent
accidental recording and erasure, initialize
and finalize discs. The Disc Setup menu is
accessed from the Home menu.
Lock Disc
DVD (VR) DVD-RAM
• Default setting: Off
Locking the disc will prevent accidental
recording, editing or erasing of the disc.
Basic settings
Important
Input Disc Name
• A locked disc can still be initialized
(which will completely erase the disc).
DVD (VR) DVD (Video) DVD+R DVD+RW DVD-RAM
HOME
MENU
When you initialize a disc for recording, the
recorder automatically assigns a name for
the disc ranging from DISC 1 to DISC 99. You
can use the Input Disc Name function to
change the default disc name to something
more descriptive. This name appears when
you load the disc and when you display disc
information on-screen.
1
Select ‘Disc Setup’ from the
Home Menu.
ENTER
2
Select ‘Basic’ > ‘Lock Disc’
then ‘On’ or ‘Off’.
Disc Setup
On
Off
Basic
Input Disc Name
HOME
MENU
Initialize
Finalize
Lock Disc
DVD-RW Auto Init.
1
Select ‘Disc Setup’ from the
Optimize HDD
Home Menu.
ENTER
2
Select ‘Basic’ > ‘Input Disc
Set to On to prevent accidental recording,
editing or erasing of the disc loaded. If you
need to unlock the disc to make edits, select
Off.
Name’ > ‘Next Screen’.
Disc Setup
Input Disc Name
Lock Disc
Next Screen
Basic
Initialize
Finalize
DVD-RW Auto Init.
Optimize HDD
DVD-RW Auto Initialize
DVD-RW
• Default setting: VR Mode
Initialization mode is automatically carried
out when you insert a blank DVD-RW. You
must set the desired initialization mode
before inserting a disc.
ENTER
3
Input a name for the disc.
The disc name can be up to 64 characters
long for a VR mode disc, or 40 for a Video
mode discs and DVD+R/+RW.
See DVD-RW Auto Initialize on page 50 for
detailed instructions.
• See Title Name on page 70 for more on
navigating the input screen.
102
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Disc Setup menu
Initialize settings
12
Undo Finalize
DVD-RW
DVD-R DVD-RW
DVD+RW DVD-RAM
You can undo the finalization on DVD-RW
discs recorded on this recorder in Video
mode. You need to do this if you want to
record more material or edit material already
on the disc.
You can initialize a recordable DVD-R/-RW
disc for either VR mode or Video mode
recording.
The first time you load a new DVD-RW disc,
it will be automatically initialized for
recording according to the DVD-RW Auto
Init. setting in the Disc Setup menu (see
page 50).
You can also undo the finalization of VR
mode discs which have been finalized on
other DVD recorders. If when you load a disc
the message This disc cannot be recorded.
Undo the finalization. is displayed, use this
command to be able to record on the disc
using this recorder.
New DVD-R discs are ready for Video mode
recording when you load them, but it is also
possible to initialize them for VR mode
1
recording.
HOME
MENU
DVD+RW and DVD-RAM discs can also be
initialized as a way of erasing the entire disc.
When initializing a DVD-RAM disc, select VR
mode.
1
Select ‘Disc Setup’ from the
Home Menu.
ENTER
See Initializing recordable DVD discs on
page 49 for detailed instructions.
2
Select ‘Finalize’ > ‘Undo
Finalize’ then ‘Start’.
Finalize settings
Optimize HDD
HDD
Finalize
DVD-R DVD-RW
DVD+R DVD+RW
As you record, erase and edit recordings, the
HDD file system gradually becomes
fragmented. Periodically, the HDD will need
optimizing to ‘clean up’ all the fragmented
files.
Finalizing ‘fixes’ the recordings in place so
that the disc can be played on a regular DVD
player or computer equipped with a suitable
DVD-ROM drive.
When the HDD needs optimizing the
recorder will automatically display a
message recommending optimization.
It is also possible to finalize DVD+RW discs.
This is only necessary if you want to a player
to display a title menu for the disc.
See Playing your recordings on other DVD
players on page 48 for detailed instructions.
Important
• Optimizing the HDD can take as long as
eight hours. During optimization,
playback and recording are not possible.
• Cancelling optimization mid-way does
not undo the optimization already done,
so the HDD will be partly optimized.
Note
1 Once initialized for VR mode recording it is not possible to re-initialize the disc for Video mode recording. Also,
once recorded in Video mode, the disc cannot be re-initialized for VR mode recording.
103
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Disc Setup menu
12
HOME
MENU
1
Select ‘Disc Setup’ from the
Home Menu.
ENTER
2
Select ‘Optimize HDD’ then
‘Start’.
Disc Setup
Start
Basic
Optimize HDD
Initialize
Finalize
Optimize HDD
A progress bar indicates how long there is
left to go. If no actions are carried out for
more than 20 minutes after the optimization
process is completed, the unit turns itself
off.
Initialize HDD
HDD
When your HDD/DVD recorder is working
without a problem this option is not visible in
the Disc Setup menu. However, if the HDD
file system becomes corrupted for some
reason, you can initialize the HDD to fix the
problem. Note that initializing the HDD will
erase all the data on it.
HOME
MENU
1
Select ‘Disc Setup’ from the
Home Menu.
ENTER
2
Select ‘Initialize HDD’ then
‘Start’.
Disc Setup
Start
Basic
Initialize HDD
Initialize
Finalize
InitializeHDD
104
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Video Adjust menu
13
Chapter 13
The Video Adjust menu
Using the Video Adjust menu you can set up
the picture quality for the built-in tuner and
external inputs, for disc playback, and for
recording.
There are six presets available:
• Tuner – suitable for general TV
broadcasts
• VCR – suitable for video cassettes
• DTV/LDP – suitable for digital
broadcasts and Laserdiscs
Setting the picture quality
for TV and external inputs
• Memory1 – user preset 1
• Memory2 – user preset 2
• Memory3 – user preset 3
Picture Creation lets you choose a set of
picture quality settings for the built-in TV
tuner and for each external input. There are
several preset settings that suit various
sources, or you can create up to three of your
own sets.
You can press DISPLAY to see the individual
settings for the current preset (Tuner, VCR
or DTV/LDP).
Creating your own set
There are three user presets in which you
can save your own set of picture quality
settings.
Important
• Unless otherwise stated, the OSDs shown
in this manual are for the Taiwan and
Philippines model.
1
Follow Choosing a preset above and
select one of the user presets (Memory 1,
2 or 3).
Choosing a preset
HOME
MENU
ENTER
1
With the recorder stopped, press
2
Select ‘Detailed Settings’.
to display the Home Menu.
2ch
Memory1
ENTER
Detailed Settings
2
3
Select ‘Video Adjust’.
ENTER
ENTER
Select a preset.
3
Select the setting you want to
adjust.
2ch
Tuner
Memory1
2ch
Detailed Settings
Prog. Motion
PureCinma
3-D Y/C
YNR
Motion
Still
• Use the INPUT SELECT button to switch
between the built-in TV tuner and the
external inputs.
Auto
Motion
Off
Still
Max
Max
Max
CNR
Off
• Use the PREV/ NEXT buttons to
change the channel of the built-in TV
tuner.
Detail
Off
White AGC
Off
105
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Video Adjust menu
13
You can adjust the following settings:
Setting the picture quality
for disc playback
• Prog. Motion – Adjusts the motion and
still picture quality when video output is
set to progressive.
This setting determines how the picture will
look when playing discs.
• PureCinema – This setting optimizes the
picture for film material when the video
output is set to progressive. Usually set
to Auto; but try switching to Off if the
picture appears unnatural.
Choosing a preset
HOME
MENU
1
With a disc playing (or paused),
• 3-D Y/C – Adjusts the brightness/colour
separation.
press to display the Home Menu.
• YNR – Adjusts the amount of noise
reduction (NR) applied to the
Y (brightness) component.
ENTER
2
3
Select ‘Video Adjust’.
Select a setting.
• CNR – Adjusts the amount of noise
reduction (NR) applied to the C (colour)
component.
ENTER
• Detail – Adjusts how sharp edges
appear.
TV
Detailed Settings
• White AGC – Turn on for automatic
white level adjustment.
There are six presets available:
• White Level – Adjusts the intensity of
white.
• TV – suitable for LCD and cathode-ray
tube TVs
• Black Level – Adjusts the intensity of
black.
• PDP – suitable for plasma display
screens
• Black Setup – Corrects the standard
reference black level (525 Input Line
System only).
• Professional – suitable for professional
monitors
• Memory1 – user preset 1
• Memory2 – user preset 2
• Memory3 – user preset 3
• Hue – Adjusts overall balance between
red and green.
• Chroma Level – Adjusts how rich the
colours appear.
You can press DISPLAY to see the individual
settings for the current preset (TV, PDP or
Professional).
ENTER
4
Adjust the currently selected
Creating your own set
setting.
There are three user presets in which you
can save your own set of picture quality
settings for disc playback.
HOME
MENU
5
Press to exit.
You can now use the preset for any other
input or the built-in TV tuner.
1
Follow Choosing a preset above and
select one of the user presets (Memory 1,
2 or 3).
Tip
• To see more of the picture as you adjust
different settings, press ENTER after
selecting the setting you want to adjust.
106
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Video Adjust menu
13
2
Move the cursor down and select
• MNR – Adjusts the amount of noise
reduction (NR) applied to the mosquito
noise (artefacts visible around the edges
of an image, caused by MPEG
compression).
‘Detailed Settings’.
Memory1
Detailed Settings
• Sharpness High – Adjusts the
sharpness of the high-frequency
(detailed) elements in the picture.
3
Select the picture quality setting you
want to adjust.
• Sharpness Mid – Adjusts the sharpness
of the mid-frequency (less detailed)
elements in the picture.
Memory1
Prog. Motion
PureCinma
Motion
Still
Auto1
On
• Detail – Adjusts how sharp edges
appear.
Subtitle Adjust
YNR
Max
Max
Max
Max
Off
Off
Off
Off
• White Level – Adjusts the intensity of
white.
CNR
BNR
MNR
• Black Level – Adjusts the intensity of
black.
You can adjust the following settings:
• Black Setup – Corrects the standard
reference black level. The Black Setup
setting is only valid for NTSC video and
S-Video output signals.
• Prog. Motion – Adjusts the motion and
still picture quality when video output is
set to progressive. (Prog. Motion is
ineffective when PureCinema is On.)
• Gamma Correction – Adjusts the
brightness of darker images.
• PureCinema – This setting optimizes the
picture for film material when the video
output is set to progressive. Usually set
to Auto 1 but try switching to Auto 2,
On or Off if the picture appears
unnatural.
• Hue – Adjusts overall balance between
red and green.
• Chroma Level – Adjusts how rich the
colours appear.
• Chroma Delay – Adjust to correct the
gap between the Y and C components in
the video signal.
• Subtitle Adjust – When the video output
is set to progressive scan, it’s possible
that the subtitles in some movies will
disappear unnaturally. In this case
select the On setting.
4
Use the / buttons to adjust the
currently selected picture quality setting.
5
When you have all the settings as you
want them, press HOME MENU to exit.
• YNR – Adjusts the amount of noise
reduction (NR) applied to the
Y (brightness) component.
Tip
• CNR – Adjusts the amount of noise
reduction (NR) applied to the C (colour)
component.
• To see more of the picture as you adjust
different settings, press ENTER after
selecting the setting you want to adjust.
• BNR – Adjusts the amount of noise
reduction (NR) applied to the block noise
(artefacts visible in areas of flat colour,
caused by MPEG compression).
107
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
14
Chapter 14
The Initial Setup menu
Using the Initial Setup menu
The Initial Setup menu is where you can set various recorder options for sound, picture,
language and so on.
Some settings can only be changed when the recorder is stopped. During playback and
recording these settings are grayed out in the Initial Setup menu.
Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of
inactivity.
•
Press HOME MENU and select ‘Initial Setup’.
In the table below, the default option is marked with a •.
Setting
Options
Explanation
Basic
Clock Setting
Auto
Set the channel that broadcasts a clock signal and
the clock will be set automatically.
Manual •
If there is no channel that broadcasts a clock signal
in your area, you can set the time and date manually.
Display
Set preferences for time and date display format.
The clock must be set in order to use timer recording.
Input Line System
525 System
Use for NTSC or PAL-60 recording from an external
input.
625 System
Use for standard PAL or SECAM recording.
Taiwan and Philippines model: Default setting is 525 System. Other: Default setting is 625 System.
See also About the input line system on page 119 for more information on this setting.
Power Save
(except Taiwan and
Philippines model)
On
No antenna input signals are passed through to the
outputs when the recorder is in standby.
Off •
When the recorder is in standby, all signals arriving
at the antenna inputs are passed along to the
outputs.
HELP Setting
On •
Off
Switches on the automatic Help screens for GUI
displays.
Switches off the automatic Help screens for GUI
displays. (Press HELP on the remote to manually
display the Help screen.)
Setup Navigator
Start
Select to start the Setup Navigator. See also
Switching on and setting up on page 29.
108
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
14
Setting
Tuner
Options
Explanation
Auto Channel
Setting
(Taiwan and
Antenna •
Cable
Select if you receive channels from an antenna. It
takes a few moments for the auto tuning to complete.
Select if you receive channels via cable. It takes a few
moments for the auto tuning to complete.
Philippines model)
Auto Channel
Setting
(Other)
Next Screen
Proceed to the next screen, select your country, then
wait for automatic tuning to complete. The channel
mapping screen should appear when the recorder is
set up. Press ENTER to exit this screen.
Manual CH Setting Next Screen
Proceed to the next screen if you need to adjust any
of the settings made by auto tuning. Select your
country, then proceed to the manual channel setting
screen:
• Change channel presets using the PREV/
NEXT buttons.
• To skip the displayed channel (because there is no
station assigned to that channel), change the Skip
setting to On.
• Set the CH System setting to match the channel
system of your country or region (except Taiwan and
Philippines model).
• Set the Channel setting to the channel you want to
assign to the current channel preset (except Taiwan
and Philippines model).
• To manually fine tune the channel, change the AFT
setting to Off then adjust the Level setting.
• Set the Sound System setting to match the sound
system of your region (except Taiwan and Philippines
model).
• The Name field allows you to input a name of up to
five characters for the current channel preset (except
Taiwan and Philippines model).
Channel Swapping Next Screen
(except Taiwan and
Philippines model)
Proceed to the next screen to swap channel
assignments of different presets so that you can
group together presets that naturally go together.
Select two presets to swap then press ENTER.
G-Code CH Setting Next Screen
Proceed to the next screen to assign channel
numbers to the guide channels as necessary. Look in
your TV guide to see which channel numbers should
be assigned to which guide channels. Press ENTER
when your done to leave this screen.
109
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
14
Setting
Options
Explanation
Video In/Out
Input Colour
System
Next Screen
Proceed to the next screen to set the input colour
system for the external input and the built-in TV tuner.
Use the CH +/– buttons to change the preset. On the
default Auto setting the recorder can generally
correctly detect whether the input signal is PAL,
SECAM, 3.58 NTSC or PAL-60, but in some cases you
may have to set it manually if the picture is displayed
incorrectly.
See also About the input colour system on page 119 for more information on this setting.
Component Video Interlace •
Out
Select if your monitor/TV is not compatible with
progressive-scan video.
Progressive
Select if your monitor/TV is progressive-scan
compatible. Check the operating instructions that
came with your monitor/TV if you’re not sure.
If your TV is incompatible with progressive scan video and you select Progressive, you will not be able to see any
picture at all. In this case, press OPEN/CLOSE while holding down the (Stop) button on the front panel to
switch to Interlace (this also switches Screen Resolution on page 116 to the default setting).
NTSC on PAL TV
On
NTSC discs will play correctly on PAL-only TVs.
Use if your TV is already NTSC-compatible.
Off •
Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating
instructions that came with your TV. See also About NTSC on PAL TV on page 119 for related information.
Audio In
NICAM Select
NICAM •
Record the NICAM audio in a NICAM broadcast.
(except Taiwan and
Philippines model)
Regular Audio
Record the non-NICAM audio in a NICAM broadcast.
(You can still switch the audio to record using the
AUDIO button before recording.)
Tuner Level
Normal •
Standard setting.
(except Taiwan and
Philippines model)
Compression
Use if the audio level from the built-in tuner is
excessive, causing distortion.
External Audio
Stereo •
Select if the audio from the currently selected
external input is standard stereo.
Dual Mono/
Bilingual
Select if each channel carries a separate soundtrack.
When the external audio is from the DV input, an audio subcode channel within the DV audio tells the recorder
whether the audio is stereo or dual mono/bilingual. This has priority over the setting you make here.
110
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
14
Setting
Options
L •
Explanation
Dual Mono
Recording
(Taiwan and
Philippines model)
Select to record the left channel of an external dual
mono source when recording to DVD in Video mode,
to HDD with HDD Recording Format set to Video
Mode On, or in LPCM mode.
R
As above, but for right channel recording.
When recording dual mono audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording
Format set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the
one you want on playback.
Bilingual Recording A/L •
(Other)
Record the left (A) channel of a bilingual source
when recording to HDD with HDD Recording Format
set to Video Mode On, to DVD in Video mode or in
LPCM mode, from an external source.
B/R
As above, but for right (B) channel recording.
When recording bilingual audio to DVD in VR mode (except in LPCM mode), or to HDD with HDD Recording Format
set to Video Mode Off (except in LPCM mode), both audio channels are recorded and you can switch to the one you
want on playback.
DV Input
Stereo 1 •
Select to use the ‘live’ audio track (recorded during
the video shoot) from a camcorder that supports two
stereo audio tracks.
Stereo 2
Mix
Select to use the overdubbed audio track from a
camcorder that supports two stereo audio tracks.
Select one of the three settings to use a mix of the
two stereo audio tracks.
Audio Out
Dolby Digital Out
Dolby Digital •
Output a Dolby Digital signal when a Dolby Digital
source is being played.
Dolby Digital Convert Dolby Digital sources to Linear PCM output.
PCM
On •
Off
Use if your connected equipment doesn’t have a
Dolby Digital decoder.
DTS Out
Output a DTS signal when a DTS source is being
played.
Switch off the digital output when a DTS source is
being played. Use when your connected equipment
doesn’t have a DTS decoder. In this case, use the
analog audio outputs.
96 kHz PCM Out
96 kHz
48 kHz •
Convert 96 kHz digital audio sources to 48 kHz
output. Use if your connected equipment doesn’t
support 96 kHz sampling rate.
96 kHz
Output 96 kHz digital audio when a 96 kHz source is
being played.
111
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
14
Setting
Options
MPEG
Explanation
MPEG Out
Output an MPEG audio signal when a source using
MPEG audio is being played.
MPEG PCM •
Convert sources with MPEG audio to Linear PCM
output. Use if your connected equipment doesn’t
have an MPEG audio decoder.
Audio DRC
On
Switches on Audio DRC (Dynamic Range Control).
Use when listening to Dolby Digital material at low
volume.
Off •
Switches off Audio DRC.
Audio DRC is not effective when listening via the digital output when the Dolby Digital Out setting is set to Dolby
Digital.
Language
OSD Language
Sets the language of the on-screen displays to
Chinese.
•
(Taiwan and
Philippines model)
English •
(Other)
Sets the language of the on-screen displays to
English.
available languages Choose from the languages displayed for the on-
screen displays.
Audio Language
Chinese •
(Taiwan and
Sets the default audio language for DVD-Video
playback to Chinese.
Philippines model)
English •
(Other)
Sets the default audio language for DVD-Video
playback to English.
available languages Choose from the languages displayed to set the
default audio language for DVD-Video playback.
Other
Select to set the default audio language to
something other than the ones listed. See Selecting
other languages for language options on page 120.
Discs do not necessarily have audio in your selected language. Also, some discs override the Audio Language
preference.
112
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
14
Setting
Options
Explanation
Subtitle Language Chinese •
Sets the default subtitle language for DVD-Video
playback to Chinese.
(Taiwan and
Philippines model)
English •
(Other)
Sets the default subtitle language for DVD-Video
playback to English.
available languages Choose from the languages displayed to set the
default subtitle language for DVD-Video playback.
Other
Select to set the default subtitle language to
something other than the ones listed. See Selecting
other languages for language options on page 120.
Discs do not necessarily have subtitles in your selected menu language. Also, some discs override the Subtitle
Language preference.
Auto Language
On •
On this setting:
• DVD-Video discs whose main audio track is in your
default language will play using that language,
without subtitles.
• Discs whose main audio track is not in your default
language but that have a subtitle track in your default
language will play the original audio track with
subtitles.
Off
Select to play DVD-Video discs according to your
audio and subtitle language preferences.
For Auto Language to be effective, the Audio Language and Subtitle Language options must be set to the same
language.
DVD Menu
Language
w/Subtitle
Language •
Sets the language of DVD-Video menus to the same
as that set for the subtitle language.
English
Sets the language of DVD-Video menus to English.
available languages Choose from the displayed languages to set the
default language for DVD-Video menus.
Other
Select to set the DVD menu language to something
other than the ones listed. See Selecting other
languages for language options on page 120.
Discs do not necessarily have menus in your selected menu language.
Subtitle Display
On •
Select to have discs display subtitles according to
your Subtitle Language and Auto Language
preferences.
Off
Select to switch off subtitle display.
Assist Subtitle
Select to display special additional assistive subtitles,
where available.
Some discs may override these settings.
113
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
14
Setting
Options
Explanation
Recording
Manual Recording On (go to setup) All the standard recording modes, plus MN1 to
MN32, LPCM and XP+ modes can be set.
Off •
Just the standard recording modes (XP, SP, LP, EP, SLP
and SEP) can be set.
See also Manual recording modes on page 122 for detailed information on manual recording levels.
Optimized Rec
On
The recording quality of timer recordings is
automatically adjusted to fit on to the selected media
if it will not fit at the selected quality setting. If the
recording will not fit even at MN1 (MN4 for DVD+R/
+RW), then the recording will be made to the HDD in
the original quality selected.
Off •
When a timer recording is set that won’t fit on to the
selected media, the recording starts but is cut off
when no more recording is possible.
Optimized Rec will only compensate for the next scheduled timer recording if more than one is set.
Set Thumbnail
0 seconds •
30 seconds
3 minutes
On •
Sets the default thumbnail picture in the Disc
Navigator to the first frame of the title.
Sets the default thumbnail picture to 30 seconds into
the title.
Sets the default thumbnail picture to three minutes
into the title.
Auto Chapter
(HDD/VR)
When recording to the HDD or in VR mode to a DVD,
chapter marks are added at the black screen
between commercials and main programming.
When recording in DV, chapter marks can be
changed by date/time.
Off
Automatic chapter marking is switched off.
Automatic chapter marking is switched off.
Auto Chapter
(Video)
No Separation
10 minutes •
When recording in Video mode, chapter markers are
inserted every 10 minutes.
15 minutes
Chapter markers are inserted every 15 minutes.
This settings applies to recording or real-time copying to Video mode DVD-R/-RW discs.
Auto Chapter
(DVD+R/+RW)
No Separation
10 minutes •
Automatic chapter marking is switched off.
When recording in DVD+R/+RW, chapter markers
are inserted every 10 minutes.
15 minutes
Chapter markers are inserted every 15 minutes.
This settings applies to recording or real-time copying to DVD+R/+RW discs.
114
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
14
Setting
Options
Explanation
HDD Recording
Format
Video Mode Off Recordings made to the HDD are made in VR mode.
Use this setting if you don’t need to transfer the
recording later to a DVD-R/-RW (Video mode) or
DVD+R/+RW.
Video Mode On • Recordings made to the HDD are compatible with
Video mode recordings. This setting is convenient if
you want to transfer the recording to a DVD-R/-RW
(Video mode) or DVD+R/+RW as high-speed copy
can be used.
• Taiwan and Philippines model: When Video Mode On is used, you must select the audio channel you want to
record when recording a broadcast with a SAP channel. On the Video Mode Off setting, both channels will be
recorded and you can switch between them on playback. See also Dual Mono Recording on page 111.
• Other: When Video Mode On is used, you must select the audio channel you want to record when recording a
bilingual broadcast. On the Video Mode Off setting, both channels will be recorded and you can switch between
them on playback. See also Bilingual Recording on page 111.
• When the recording mode is set to XP+, you cannot change HDD Recording Format.
Playback
TV Screen Size
4:3 (Letter Box)
Select if you have a standard 4:3 TV and prefer the
letter box format presentation for widescreen
material.
4:3 (Pan & Scan)
16:9 •
Select if you have a standard 4:3 TV and prefer the
pan and scan presentation for widescreen material.
Select if you have a widescreen 16:9 TV. Your TV
settings determine how 4:3 material will look.
Selecting 4:3 (Letter Box) or 4:3 (Pan & Scan) does not guarantee that all video material will be presented in that
format as some discs override this setting.
Still Picture
Field
Produces a stable, generally shake-free image.
Produces sharp image, but may be prone to shake.
Frame
Auto •
Generates a generally less sharp but more stable still
image.
Seamless Playback On
Off •
Playback is smooth, but with a trade-off against the
accuracy of the edit points.
You may notice momentary interruption at edited
points during playback of a VR mode Play List.
This setting applies to HDD, DVD-R/-RW (VR) and DVD-RAM playback.
115
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
14
Setting
Options
Explanation
Parental Lock
Set Password
In order to change the parental lock level or change
the country/area code, set the password using this
option. From the following screen, enter a four-digit
number that will be your password.
Change Password In order to change the password, first enter your
existing password and then a new one from the
following screen.
Change Level
From the following screen, first enter your password
and then set a parental lock level.
Country/Area
Code
From the following screen, first enter your password
and then set a country/area code. See Country/Area
code list on page 133.
Only certain discs have parental lock and country/area code features. Check the disc packaging to see what features
the disc has. If you forget your password you can reset it by resetting the recorder to its factory settings. See
Resetting the recorder on page 136.
Angle Indicator
On •
A camera icon appears on-screen during multi-angle
scenes on a DVD-Video disc.
Off
Nothing is indicated on-screen when a multi-angle
scene is showing.
HDMI Output (only available when an HDMI device is connected)
Screen Resolution
1920 x 1080p
1920 x 1080i
1280 x 720p
Constant 1920 x 1080p output.
Constant 1920 x 1080i output.
Constant 1280 x 720p output.
720 x 576p
(720 x 480p)
Constant 720 x 576p output (when setting the Input
Line System to 525 System, video is output in
720 x 480p).
720 x 576i
(720 x 480i)
Constant 720 x 576i output (when setting the Input
Line System to 525 System, video is output in
720 x 480i).
• Depending on the connected device some settings may not be available.
• If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case,
press OPEN/CLOSE while holding down the (Stop) button on the front panel to switch the setting (this also
switches Component Video Out on page 110 to the default setting).
4:3 Video Output
Full
Select if your HDMI TV allows you to change the
aspect ratio.
Normal
Select if your HDMI TV does not allow you to change
the aspect ratio. 4:3 video will be shown with bars on
each side.
116
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
14
Setting
Colour
Options
Explanation
RGB (0–255)
Use if colours are weak and black appears to ‘float’
on the RGB (16–235) setting.
RGB (16–235)
YCbCr 4:2:2
Use this setting if colours appear overly rich and the
black too deep on the RGB (0–255) setting.
The video signal is output as a YCbCr 4:2:2
component signal. This is the standard setting for
HDMI-compatible devices.
YCbCr 4:4:4
The video signal is output as a YCbCr 4:4:4
component signal.
• Depending on the connected device some settings may not be available.
• When a DVI device is connected, the YCbCr 4:2:2 and YCbCr 4:4:4 options are not available.
Transmission Mode Auto
Select this setting to output video in the optimum
transmission mode according to the connected
device.
Normal
Select this setting when pictures are not shown
properly.
If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case,
press OPEN/CLOSE while holding down the (Stop) button on the front panel to switch the setting.
Audio Output
Auto •
Dolby Digital, MPEG and DTS sources are output as a
bitstream signal. However, depending on the Audio
Out setting, number of audio channels, and the HDMI-
connected device, Linear PCM audio may be output.
PCM
All audio signals are converted to Linear PCM (except
DTS).
Bitstream Priority Select if the connected device is compatible with
bitstream audio.
This setting is not available when a DVI device is connected.
HDMI Control
On •
Off
Enable the HDMI Control function. Select this option
when connected to an HDMI Control-compatible
Pioneer plasma television, AV system (amplifier or AV
receiver etc.).
Disable the HDMI Control function. Select this option
when not connected to an HDMI Control-compatible
component, or when connected to a component
manufactured by a company other than Pioneer.
• For more information about HDMI Control, see HDMI Control on page 22.
• This setting is available even if you are not connected to an HDMI device.
• For more information see Troubleshooting on page 127.
117
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
14
Setting
Options
Options
Explanation
On Screen Display On •
The recorder displays operation displays (Stop, Play,
etc.) on-screen.
Off
Switches off the on-screen operation displays.
Front Panel Display On •
The time is shown in the front panel display when the
recorder is in standby.
Off
The front panel display is switched off in standby.
Remote Control
Mode
Recorder 1–3
(default: Recorder 1)
If you are using more than one recorder in the same
room, set them to different IDs. This setting sets the
recorder ID; to change the remote controller ID,
press and hold RETURN then press 1, 2 or 3 to set.
The remote will only control a recorder with the same
ID.
DivX VOD
Registration Code Use to display the recorder’s DivX registration code.
See DivX video compatibility and DivX® VOD content
on page 10.
Set Preview
(HDD only)
Quick Preview •
When in the Disc Navigator, the thumbnail video
plays short excerpts from throughout the selected
title. (Note that edited titles that will play normally
from the beginning.)
Normal
The thumbnail video plays from the beginning of the
title.
Options 2
USB
Restart USB
Device
If the connected USB device does not respond to the
recorder, try using this option to restart it. If the
device still does not work properly try switching it off
then back on, and/or disconnecting then
reconnecting the USB cable.
Confirm Printer
Proceed
Use this option to confirm the make and model of the
printer connected to the recorder (does not work with
all printers).
HDD Sleep Mode
Puts the HDD to sleep. Using this feature when
playing DVDs or CDs allows you to reduce noise
produced by the unit, resulting in improved sound
quality. When you wake the HDD back up it will take
a few seconds to load.
The HDD can be taken out of Sleep Mode by any
number of actions, including:
• Turning the power off and on again.
• Pressing the HDD/DVD button and choosing the
HDD.
• When a timer recording begins.
• When you try and make any changes to system
settings.
118
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
14
About the input colour system
The available options of the Input Colour
System setting depend on the Input Line
System setting. The tables below show the
different options available.
Additional information about the
TV system settings
About the input line system
This recorder is compatible with PAL,
SECAM, 3.58 NTSC and PAL-60 TV systems.
The Input Line System and Input Colour
System settings determine how the recorder
treats incoming video signals from an
external input or the built-in TV tuner.
Please note the following points when
changing the input line system:
• If, when the Input Line System setting is
changed, the screen goes blank (due to
incompatibility with your TV), you can
switch back by pressing and holding the
front panel (Stop) button then
pressing INPUT SELECT (also front
panel) while the recorder is stopped.
• When you switch the Input Line System
setting the Copy List is erased. If you
switch the setting using the (Stop)
button and INPUT SELECT buttons as
described above, there is no
Taiwan and Philippines model:
Input Line
System
External
input
Built-in tuner
625 System
525 System
Other:
n/a
Auto
PAL
SECAM
Auto
3.58 NTSC
3.58 NTSC
PAL–60
Input Line
System
External
input
Built-in tuner
625 System
525 System
Auto
Auto
confirmation, so please use with care.
PAL
PAL
• You can’t mix recordings of different TV
line systems on the same disc.
SECAM
3.58 NTSC
SECAM
Auto
• When you change this setting, the Input
Colour System setting also changes
(page 119).
3.58 NTSC
PAL–60
About NTSC on PAL TV
Depending on the Input Line System setting
and the NTSC on PAL TV setting, the signal
format output when the recorder is stopped
varies as shown in the table below.
Additional information about
component video output
If you switch the Component Video Out
setting to Progressive when using a TV that
is not compatible with progressive-scan
video, you will not be able to see anything
displayed on your TV. If this happens, press
and hold the (Stop) button on the front
panel, then press OPEN/CLOSE. This will
set the recorder’s video output back to
Interlace.
Output
when
stopped
Input Line
System
NTSC on PAL
TV
625 System
Off
On
Off
On
PAL
PAL
525 System
NTSC
PAL–60
119
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Setup menu
14
Selecting other languages
for language options
ENTER
1
Select ‘Other’ from the
language list.
This option appears in the settings for DVD
Menu Language, Audio Language, and
Subtitle Language.
ENTER
2
Select the language you
want.
Initial Setup
Basic
OSD DVD Menu Language
Audio
Tuner
Language
English
Video In/Out
Audio In
Subti
Number
Auto
0
1
4
5
Audio Out
Language
Recording
Playback
DVD
Subti
• Select by language name: Use the /
buttons to change the language.
• Select by code number: Press then
use the number buttons to enter the
four-digit language code.
See Language code list on page 133 for a list
of available languages and corresponding
codes.
120
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
15
Chapter 15
Additional information
Minimum copying times
The table below shows the minimum HDD to DVD copying time for one hour of video.
1
Please note that not all discs are compatible with high-speed copying. Check with the disc
manufacturer for compatibility.
Rec mode
SEP
SLP
EP
LP
SP
XP
DVD disc type
10 h
8 h
6 h
4 h
2 h
1 h
DVD-R/1x
DVD-RW/1x
1x
2x
6 mins.
3 mins.
7.5 mins.
4 mins.
10 mins.
5 mins.
15 mins.
7.5 mins.
30 mins.
15 mins.
60 mins.
30 mins.
DVD-RW/2x
DVD-R DL
DVD-RAM/2x
DVD+R/2.4x
DVD+RW/2.4x
DVD+R DL
2.4x
3x
*1
*1
*1
6.3 mins.
5 mins.
12.5 mins.
10 mins.
25 mins.
20 mins.
DVD-RAM/3x
DVD-RAM/5x
2 mins.
2.5 mins.
3.5 mins.
DVD-R/4x
DVD-RW/4x
DVD+R/4x
4x
6x
1.5 mins.*1
2 mins.*1
2.5 mins.*1
4 mins.
3 mins.
7.5 mins.
5.5 mins.
15 mins.
11 mins.
DVD+RW/4x
DVD-R/8x/16x
DVD+R/8x/16x
DVD-RW/6x
1.25 mins.*1 1.6 mins.*1 2.2 mins.*1
DVD+RW/8x
Note that all times in the above table are approximate. Also that actual copy speed varies with the part of the disc
being recorded.
*1 Titles recorded on DVD+R/+RW in SEP, SLP or EP modes cannot be high-speed copied.
Note
1 Depending on the disc, the copy speed may be reduced (for example, although a 6x disc is used, the copy may
be made at 2x speed).
121
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Manual recording modes
15
The table below shows the approximate recording times for different DVD types in each
manual recording mode, as well as the standard recording mode equivalents. For recording
time on the HDD, see Specifications on page 137.
Rec. time*1
Resolution*2
Single-Layer
DVD:
DVD-R/-RW
DVD+R/+RW
DVD-RAM
Video mode On (HDD)
Video mode (DVD-R/-RW)
DVD+R/+RW
Video mode (DVD-R DL)
DVD+R DL
Dual-Layer
DVD:
DVD-R DL
DVD+R DL
Video mode Off (HDD)
VR mode (DVD-R/-RW)
DVD-RAM
VR mode (DVD-R DL)
Level
*3,4
802 mins.
720 mins.
600 mins.
480 mins.
420 mins.
360 mins.
1440 mins.
1292 mins.
1077 mins.
861 mins.
754 mins.
646 mins.
MN 1
MN 2
MN 3
MN 4
MN 5
*3,4
*3,4
*4
SEP
SLP
352 x 240/
352 x 288
352 x 240/
352 x 288
*4
*4
EP
LP
MN 6
MN 7
MN 8
MN 9
300 mins.
270 mins.
240 mins.
230 mins.
220 mins.
210 mins.
200 mins.
190 mins.
180 mins.
170 mins.
160 mins.
150 mins.
140 mins.
130 mins.
120 mins.
110 mins.
105 mins.
100 mins.
95 mins.
90 mins.
85 mins.
80 mins.
75 mins.
70 mins.
65 mins.
61 mins.
61 mins.
--- mins.
538 mins.
484 mins.
431 mins.
413 mins.
395 mins.
377 mins.
359 mins.
341 mins.
323 mins.
305 mins.
287 mins.
269 mins.
251 mins.
233 mins.
215 mins.
197 mins.
188 mins.
179 mins.
170 mins.
161 mins.
153 mins.
144 mins.
135 mins.
126 mins.
117 mins.
111 mins.
111 mins.
--- mins.
352 x 480/
352 x 576
352 x 480/
352 x 576
480 x 480/
480 x 576
MN 10
MN 11
MN 12
MN 13
MN 14
MN 15
MN 16
MN 17
MN 18
MN 19
MN 20
MN 21
MN 22
MN 23
MN 24
MN 25
MN 26
MN 27
MN 28
MN 29
MN 30
MN 31
MN 32
LPCM
544 x 480/
544 x 576
SP
720 x 480/
720 x 576
720 x 480/
720 x 576
XP
*5
XP+
*1
*2
*3
*4
*5
Recording time may be slightly shorter for certain disc types or recording modes.
The first figure refers to when the Input Line System is set to 525 System; the second when set to 625 System.
Modes MN1 to MN3 not available when using DVD+R/+RW.
Titles recorded at MN6 or lower cannot be high-speed copied to DVD+R/+RW.
XP+ mode is available for HDD recordings only. If set for a DVD recording, the DVD will be automatically recorded
in MN32 mode.
122
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
15
•
Levels separated by a bold line show where there is a noticeable change in picture quality.
•
Audio recording in all manual recording modes is in Dolby Digital 2 ch format, except for LPCM mode, which is
in Linear PCM format.
•
See also Recording on page 32.
Troubleshooting
Incorrect operation is often mistaken for trouble and malfunction. If you think there is
something wrong with this component, please check the points below. Sometimes the
trouble may lie in another component. Investigate the other components and electrical
appliances being used. If the trouble cannot be rectified even after checking the points below,
ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
General
Problem
Remedy
The disc is
• Check that the disc is not an incompatible format disc (page 7).
• Check that the disc is loaded properly (aligned in disc tray and
label-side up).
automatically ejected
after closing the disc
tray
• Take out the disc and clean it (page 135).
• Check that the disc has a region code compatible with the recorder.
Can’t eject a disc
Can’t play a disc
• Turn off the power to this device and press and hold OPEN/
CLOSE on the front of the unit for more than three seconds.
• Check that the disc is a compatible format disc (page 7).
• Take out the disc and clean it (page 135).
• Check that the disc is loaded properly (aligned in disc tray and
label-side up).
• Press HDD/DVD to select the DVD.
• There may be condensation in the recorder. Leave the recorder for
an hour or so for the condensation to evaporate.
• During HDD recording, you can’t play discs that are recorded with
a Line System different to the current recorder setting.
• DVD+R/+RW discs recorded using another recorder with copy-
once protected recordings will not play in this recorder.
Can’t record a disc
No picture
• Check that the disc is not an incompatible format disc (page 7).
• Some DVD-RAM discs are not recordable until they have been
initialized (page 49). This can take up to an hour.
• Check that everything is connected properly (page 14).
• Check that the connected TV and/or the AV amplifier/receiver is set
to the correct input.
• The recorder may be set to progressive scan with an incompatible
TV. Reset to interlace by pressing and holding the front panel
(Stop) button then pressing OPEN/CLOSE.
All settings are reset
• If the recorder is unplugged (or there is a power failure) while the
recorder is on, all the settings will be lost.
• Make sure that you switch the recorder into standby before
unplugging the power cord.
123
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
15
Problem
Remedy
Remote control does
not work
• If you connected this recorder to another Pioneer product using the
CONTROL IN jack, point the remote control at the other component
to use (page 14).
• Set the remote control to the same ID number as the recorder
(page 118). (When the batteries run down, the remote mode is
automatically reset to Recorder1.)
• Use the remote within its operating range (page 6).
• Replace the batteries (page 6).
No sound or sound is
distorted
• Make sure that the amplifier/receiver or TV is set to the correct
input and the volume turned up.
• There is no sound when the picture is paused, or during scanning
or slow motion play. Press PLAY to resume regular playback.
• DTS discs can only be played if this recorder is connected to a DTS
decoder or DTS compatible amplifier/receiver. If you have connected
a suitable decoder, also make sure that the Initial Setup > Audio
Out > DTS Out setting is On.
• Some 96 kHz discs do not output audio through the digital jack. In
this case, switch the input of your amplifier/receiver to analog.
• Check the audio cable connections (page 14).
• If the sound is distorted, try cleaning the cable plugs.
Cannot switch a dual
mono/bilingual
programme
• During real-time copying it is not possible to switch audio
channels. The main and sub channels are both output.
The picture is
distorted
• Change the Input Line System setting (page 108). (You can also
change it by pressing the (Stop) button and INPUT SELECT on the
front panel simultaneously with the recorder stopped.)
The picture from the
external input is
distorted
• If the video signal from the external component is copy-protected,
you cannot connect via this recorder. Connect the component
directly to your TV.
Screen is stretched
vertically or
• Make sure that the TV Screen Size setting (page 115) is correct for
the kind of TV you have (see also page 134).
horizontally
• If you have a widescreen TV, check its aspect ratio settings.
• This recorder’s input switches into wide mode automatically
according to the input signal. When the unit connected is not
compatible with VIDEO ID-1 (widescreen signalling), set the
connected component to output 4:3 aspect ratio (standard) video.
124
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
15
Problem
Remedy
Can’t play a disc
recorded using this
recorder on another
player
• If the disc was recorded in DVD-R/-RW (Video mode) or DVD+R,
make sure that it’s finalized (page 48).
• Some players will not play recordable DVD discs, even when
recorded in DVD-R/-RW (Video mode) or DVD+R and finalized.
• If the disc was recorded in VR mode, the other player must be
specifically RW compatible in order to play it (page 7).
• Discs recorded with copy-once material cannot be played on non-
CPRM compatible players (page 35).
• DVD+RW discs containing only a small amount of recorded material
may not play on other players. Finalize the disc and try again.
During playback the
picture is dark or
distorted
• When a copy-protected disc is played via a VCR, the picture will not
display correctly. Connect the recorder directly to your TV.
Recorded contents are • Change the recording mode to XP/SP.
not clear or artefacts
appear in areas of flat
colour (due to MPEG
compression; also
known as block noise)
Can’t record or does
not record
successfully
• Check that there is some remaining blank space on the DVD/HDD.
• For a DVD-R/-RW (Video mode) or DVD+R, check that the disc isn’t
already finalized.
• Check the limits on the number of titles and chapters on a disc:
– HDD: 999 titles
– VR mode: 99 titles, 999 chapters per disc
– Video mode disc: 99 titles per disc, 99 chapters per title
– DVD+R/+RW: 49 titles per disc, 99 chapters per title (max
254 chapters per disc)
• Check that the source you are trying to record is not copy protected.
• For a VR formatted disc, check that the disc isn’t locked (page 102).
• Check that you are recording with the same TV system (PAL, NTSC,
etc.) as the disc has already been recorded in. All recordings on a
disc must be in the same TV system. When recording to the HDD, it
is also necessary to set the Input Line System setting to match what
you want to record (page 108).
• The power may have failed during recording.
Timer programme
doesn’t record
successfully
• When setting the recording channel, make sure you set the
recorder’s built-in TV tuner, not the TV’s built-in tuner.
• When recording to a DVD-R/-RW (Video mode) or DVD+R/+RW,
programmes that are copy-once protected cannot be recorded. Use a
VR mode formatted disc for copy-once material (page 35).
• Two timer programmes may have overlapped, in which case only
the earlier one will record completely.
• The power may have failed during recording.
• Check that the recorder’s TV system (PAL, NTSC, etc.) settings are
the same as the channel set for recording.
125
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
15
Problem
Remedy
After briefly
• A backup battery inside the recorder keeps the clock and other
unplugging or after a settings from being reset when there is no power to the recorder.
power failure the
front panel display
shows ‘--:--’
After unplugging or a power failure, the battery keeps all settings for
some five years from the date it was shipped from the factory. Reset
the clock and other recorder settings to use the recorder again.
• To have the battery replaced, please ask your nearest Pioneer-
authorized service center or your dealer to carry out repairs.
Front panel display
shows ‘LOCKED’ when
a button is pressed
• The child lock is on; turn off in order to use the recorder (page 45).
Can’t use One Touch
Copy (HDD to DVD)
• Make sure that there is a recordable DVD-R/-RW loaded with some
free space for recording and fewer than 99 titles already on the disc.
Also make sure that for a DVD-R/-RW (Video mode) or a DVD+R, the
disc isn’t finalized.
• Make sure there is a recordable DVD+R/+RW loaded with some
free space for recording and fewer than 49 titles already on the disc.
• If you delete a title from a DVD+R/+RW disc, the number of
remaining recordable titles may not decrease.
• Further recording is not possible on a finalized DVD+R. Check that
there isn’t a disc menu on the disc you’re trying to use.
• If the title currently playing contains material that is copy-once
protected, One Touch Copy will not work.
• If the currently playing HDD content was recorded in XP+ mode,
the One Touch Copy feature can’t be used.
• One Touch Copy can’t be used for titles over eight hours long when
copying to DVD+R/+RW (though you can use a DVD+R DL).
• One Touch Copy can’t be used for MN1 to MN6, SEP, SLP or EP
titles when copying to DVD+R/+RW.
• One Touch Copy doesn’t work if the recorder is already recording to DVD.
Can’t use One Touch
Copy (DVD to HDD)
• Make sure that there is space available on the HDD and that there
are fewer than 999 titles on the HDD.
• One Touch Copy doesn’t work if the recorder is already recording to
the HDD.
The device connected • Check that the device is compatible with this recorder (page 23).
to the USB port is not • Use a USB cable less than 5 m in length.
recognized
• Check that the USB cable is inserted fully.
• Check that the USB device is powered on.
• Try switching this recorder into standby mode and then back on.
• Try using the Restart USB Device option from the Initial Setup
menu (page 118).
• If several USB devices (camera, USB memory, card reader, etc.) are
connected at the same time, it’s possible that only the first device
connected to this recorder will be recognized.
File names are not
displayed properly.
• Files names that do not conform to the ISO8859-1 standard may not
display correctly on this unit.
126
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
15
HDMI
Problem
Remedy
The connected HDMI
• Try disconnecting then reconnecting the HDMI cable (while the
or DVI device does not power of both components is on).
display any picture
(and the front panel
HDMI indicator does
not light)
• Try switching the power of the HDMI/DVI device off then back on.
• Try switching off the HDMI/DVI device and this recorder. Next,
switch on the HDMI/DVI device and leave it for around 30 seconds,
then switch on this recorder.
• When you connect an HDMI-compatible device make sure of the
following:
– The connected device’s video input is set correctly for this unit.
– The cable you’re using is fully HDMI-compliant. Using a non-
standard cable may result in no picture being output.
– Don’t use several HDMI cables connected together. Use a single
cable to connect devices together.
• When you connect a DVI-compatible device make sure of the
following:
– The connected device’s video input is set correctly for this unit.
– The DVI terminal on the connected device is HDCP-compatible.
– The connected device is compatible with NTSC (720 x 480i/p,
1280 x 720p, 1920 x 1080i/p) and PAL (720 x 576i/p, 1280 x 720p,
1920 x 1080i/p) video input.
• If the recorder’s internal HDD is damaged or broken, there will be
no HDMI output.
• Not all HDCP-compatible DVI devices will work with this recorder.
No video from the
HDMI output
• If you choose a setting that is incompatible with your TV you may
not be able to see any picture at all. In this case, press OPEN/
CLOSE while holding down the (Stop) button on the front panel to
switch the setting (this also switches Component Video Out on
page 110 to the default setting).
There’s no sound from • There is no sound when using a DVI terminal.
the connected HDMI
• Some HDMI-compatible devices do not output sound (check with
or DVI device
the manual that came with the connected device).
The power
• This unit’s power may be turned on each time you turn on the
automatically turns on power for a connected plasma television. If you do not want this unit
to be turned on in this way, set this unit’s HDMI Control to OFF
(page 117).
Can’t record video
• When using HDMI Control to record, you must make sure that the
channel information for the plasma television matches that of this
unit. If the channel information does not match you cannot make
recordings. Use the Auto Channel Setting function to set this unit’s
channel information (page 109).
127
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
15
Problem
Remedy
HDMI Control does
not respond
• Verify that the HDMI cable is firmly connected (page 21).
• Check whether HDMI Control is set to On for this unit and the
device connected to this unit. For more information, refer to the
operating instructions of your plasma television or AV system.
• Depending on the type of plasma television, some HDMI input
terminals do not support the HDMI Control function. For details, see
the operating instructions supplied with your plasma television.
• HDMI Control may not operate properly if you do not use an HDMI
cable that supports the HDMI 1.3 Specification.
• This function may not work properly if you have multiple recorders
connected to a single plasma television or AV system. For more
information, refer to the operating instructions of your plasma
television or AV system.
• Controls may not function properly in certain situations, such as
immediately after you have connect an HDMI cable, turn this unit’s
power off or remove the power cable for this unit or the connected
component. If you experience any problems, set HDMI Control to On
for all connected units, and then display the pictures stored on this
unit on your plasma television to improve the situations.
• Check whether the connected component supports HDMI Control
or not.
• Certain functions are not supported on with plasma televisions and
AV systems.
• We cannot guarantee this unit will work with HDMI Control-
compatible components other than those made by Pioneer. When
using HDMI Control-compatible components manufactured by
companies other than Pioneer, set the HDMI Control to Off
(page 117).
If the unit does not operate normally due to external effects such as static electricity, disconnect
the power plug from the outlet and insert again to return to normal operating conditions.
If the picture freezes and the front panel and remote control
buttons stop working
• Press (Stop) then try restarting
STANDBY/ON
playback.
• Press the front panel STANDBY/ON
button to switch the power off, then
HDD/DVD
OPEN/CLOSE
switch back on and restart playback. If
the power fails to switch off, press and
hold STANDBY/ON for five seconds
until the power switches off.
DivX
C
OP
Y
STANDBY/ON
DV IN
USB
STOP REC
INPUT
SELECT
CH
128
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
On-screen displays
15
The table below shows a list of error messages that you may encounter when using the
recorder and an explanation of their meaning.
Message
Explanation/Action
• Initializing disc. Please wait a
moment.
When you load a blank DVD-RW or DVD+RW disc,
the recorder automatically initializes it.
• Incompatible region number.
The disc loaded has an incompatible region
number for the recorder and so will not play.
• Cannot record any more titles.
• No more space for file management
data.
The disc control data limit has been reached, or
the maximum number of chapters and/or titles has
been reached. Erase titles/chapters or combine
chapters.
• This disc cannot be recorded. Undo
the finalization.
The disc was finalized on a non-Pioneer DVD
recorder. Undo the finalization in order to
recording/editing.
• Cannot play this disc.
• This disc cannot be recorded.
• Cannot read the CPRM information.
• Could not record the information to
the disc.
The disc may be dirty or damaged. Take out the
disc, clean it and retry. If the error persists, use a
new disc. If the error appears even with a new disc,
please ask your nearest Pioneer-authorized service
center or your dealer to carry out repairs.
• Cannot edit.
• Could not initialize disc.
• Could not complete finalization
successfully.
• Could not undo finalization
successfully.
• Could not successfully unlock the
disc.
• Incompatible or unreadable disc.
The disc loaded is a playback-only disc type. This
display may also appear if the disc is dirty or
damaged.
• Cannot record to a disc that is not
CPRM compatible.
The video source is copy-once protected. Use a VR
mode DVD-R/-RW disc with CPRM for recording.
• Cannot record this content using
Video mode recording.
• This video cannot be recorded to
DVD+R/+RW.
• This content is copy protected.
The video source is copy-protected and cannot be
recorded.
• Incorrect CPRM information.
The recorder could not read the CPRM
information. The recorder may be damaged —
please ask your nearest Pioneer-authorized service
center or your dealer to carry out repairs.
129
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
15
Message
Explanation/Action
• Repairing disc.
• Repairing the HDD.
During recording, the power was cut. This display
appears when the power is restored.
• Could not repair the disc.
The recorder was unable to repair the disc after a
power cut. The contents of the recording will be
lost.
• Overheating has stopped operation.
Press DISPLAY to clear message.
The internal temperature of the recorder has
exceeded the operating limit. If this message
reappears, please ask your nearest Pioneer-
authorized service center or your dealer to carry
out repairs.
• HDD optimization is recommended.
This can be done using Disc Setup.
The HDD should be optimized (basically, HDD
housekeeping) to maintain playback and recording
performance.
• Please perform HDD optimization.
This can be done using Disc Setup.
The HDD is in more urgent need of optimization in
order to maintain performance.
• The HDD has not been sufficiently
optimized. Please optimize again.
If this message appears repeatedly after
optimizing the HDD it is likely that there is not
enough free space on the HDD for optimization to
complete properly. Please erase some titles from
the HDD and optimize again.
• An error occurred. Please consult the This message is displayed when information from
service center. Note that contents on the HDD cannot be read. The HDD may be
the HDD may be erased when servicing damaged or broken. Please ask your nearest
this unit.
Pioneer-authorized service center or your dealer to
carry out repairs.
• The Hard Disk Drive info is incorrect.
As the HDD info cannot be properly read, no new
Use the Disc Setup menu to reinitialize. recordings can be made. Reinitializing the HDD
(page 104) may result in your being able to make
recording again. Note that reinitializing the HDD
will erase all recorded contents, including
protected files.
• There is no DV input or the input
signal is unrecordable.
No signal was detected at the DV IN jack. This may
appear if a blank section of DV tape is playing in
the connected camcorder.
• No DV camcorder connected.
The camcorder is not connected properly, or the
camcorder is switched off.
• You cannot connect more than one
DV camcorder at a time.
This recorder’s DV jack supports connection to
just one camcorder.
• Cannot operate the DV camcorder.
This recorder cannot operate the DV camcorder.
Try switching off the camcorder then turn it back
on again.
130
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
15
Message
Explanation/Action
• Could not operate the DV camcorder. This recorder was not able to operate the DV
camcorder.
• The DV camcorder is not set for
The camcorder is in camera mode. Switch it to
playback. Please select playback mode playback mode.
on the DV camcorder.
• The printer is not ready or is not
connected. Please check the printer.
This message is displayed when communication
could not be established with the printer. See the
Troubleshooting section if you do not know the
cause.
• Printing has been cancelled
because ...
This message is displayed when there is a printer
error during printing. After checking the printer for
the cause of the error, either reconnect the printer
and start the printing job again, or select “Yes” to
resume printing (select “No” to cancel the print
job). See also the operating instructions that came
with your printer for possible causes of print errors.
Front panel displays
The table below shows a list of error messages that you may encounter when using the
recorder and an explanation of their meaning.
Message
• E01
Explanation/Action
The HDD may be damaged or broken. Please ask
your nearest Pioneer-authorized service center or
your dealer to carry out repairs.
• E02
As the HDD info cannot be properly read, no new
recordings can be made. Reinitializing the HDD
(page 104) may result in your being able to make
recording again. Note that reinitializing the HDD
will erase all recorded contents, including
protected files.
131
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
15
Setting up the remote to
control your TV
Maker
Alba
Code
66
You can use the supplied remote to control
your TV. To be able to use this feature you
first have to program the remote with a
maker code from the table below.
Bush
76
Fisher
61, 65
77
Fujitsu
Funai
1
Press and hold down the CLEAR
67
button, then enter the maker code for
your TV.
The LED indicator on the remote controls
lights.
Goldstar
Grandiente
Grundig
Hitachi
ITT
79
87
51, 82
56, 60, 83, 86
70
See the table below for the list of maker
codes. If there is more than one code given
for your make, input the first one in the list.
• If the maker’s name of your TV doesn’t
appear in the table below, you will not be
able to use this remote to control your
TV.
Mitsubishi
Nokia
59
53, 81
58, 72
57, 85, 89
50, 80
68
Panasonic
Philips
Pioneer
RCA
2
Press TV to check that the remote
works with your TV.
If the remote is set up correctly, the TV
should switch on/off. If it doesn’t and there is
another code given for your maker, repeat
step 1 with a new code.
Salora
Samsung
Sanyo
71
Using the TV remote control
buttons
The table below shows how to use this
remote control with your TV.
73, 75
74
Sei
78
Button
What it does
Sharp
52
TV
Press to switch the TV on/
off (standby)
Sony
54
Tandy
69
INPUT SELECT Press to change the TV’s
video input
Telefunken
Thomson
Toshiba
JVC
64
TV VOLUME
Use to adjust the TV
volume
62, 89
55
TV CHANNEL Use to change TV channels
63
132
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
15
Language code list
Language (Language code letter), Language code
Japanese (ja), 1001
English (en), 0514
French (fr), 0618
German (de), 0405
Italian (it), 0920
Spanish (es), 0519
Chinese (zh), 2608
Dutch (nl), 1412
Portuguese (pt), 1620
Swedish (sv), 1922
Russian (ru), 1821
Greek (el), 0512
Bhutani (dz), 0426
Esperanto (eo), 0515
Estonian (et), 0520
Basque (eu), 0521
Persian (fa), 0601
Finnish (fi), 0609
Fiji (fj), 0610
Faroese (fo), 0615
Frisian (fy), 0625
Kirghiz (ky), 1125
Latin (la), 1201
Lingala (ln), 1214
Laotian (lo), 1215
Lithuanian (lt), 1220
Latvian (lv), 1222
Serbo-Croatian (sh), 1908
Sinhalese (si), 1909
Slovak (sk), 1911
Slovenian (sl), 1912
Samoan (sm), 1913
Shona (sn), 1914
Somali (so), 1915
Albanian (sq), 1917
Serbian (sr), 1918
Siswati (ss), 1919
Sesotho (st), 1920
Sundanese (su), 1921
Swahili (sw), 1923
Tamil (ta), 2001
Telugu (te), 2005
Tajik (tg), 2007
Thai (th), 2008
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Setswana (tn), 2014
Tonga (to), 2015
Malagasy (mg), 1307
Maori (mi), 1309
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Moldavian (mo), 1315
Marathi (mr), 1318
Malay (ms), 1319
Maltese (mt), 1320
Burmese (my), 1325
Nauru (na), 1401
Nepali (ne), 1405
Occitan (oc), 1503
Oromo (om), 1513
Oriya (or), 1518
Irish (ga), 0701
Scots-Gaelic (gd), 0704
Galician (gl), 0712
Guarani (gn), 0714
Gujarati (gu), 0721
Hausa (ha), 0801
Hindi (hi), 0809
Croatian (hr), 0818
Hungarian (hu), 0821
Armenian (hy), 0825
Interlingua (ia), 0901
Interlingue (ie), 0905
Inupiak (ik), 0911
Indonesian (in), 0914
Icelandic (is), 0919
Hebrew (iw), 0923
Yiddish (ji), 1009
Javanese (jw), 1023
Georgian (ka), 1101
Kazakh (kk), 1111
Greenlandic (kl), 1112
Cambodian (km), 1113
Kannada (kn), 1114
Korean (ko), 1115
Kashmiri (ks), 1119
Kurdish (ku), 1121
Polish (pl), 1612
Czech (cs), 0319
Norwegian (no), 1415
Afar (aa), 0101
Abkhazian (ab), 0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Assamese (as), 0119
Aymara (ay), 0125
Azerbaijani (az), 0126
Bashkir (ba), 0201
Byelorussian (be), 0205
Bulgarian (bg), 0207
Bihari (bh), 0208
Bislama (bi), 0209
Bengali (bn), 0214
Tibetan (bo), 0215
Breton (br), 0218
Catalan (ca), 0301
Corsican (co), 0315
Welsh (cy), 0325
Panjabi (pa), 1601
Pashto, Pushto (ps), 1619 Turkish (tr), 2018
Quechua (qu), 1721
Rhaeto-Romance (rm),
1813
Kirundi (rn), 1814
Romanian (ro), 1815
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sindhi (sd), 1904
Sangho (sg), 1907
Tsonga (ts), 2019
Tatar (tt), 2020
Twi (tw), 2023
Ukrainian (uk), 2111
Urdu (ur), 2118
Uzbek (uz), 2126
Vietnamese (vi), 2209
Volapük (vo), 2215
Wolof (wo), 2315
Xhosa (xh), 2408
Yoruba (yo), 2515
Zulu (zu), 2621
Danish (da), 0401
Country/Area code list
Country/Area, Country/Area code, Code letter
Argentina, 0118, ar
Australia, 0121, au
Austria, 0120, at
Belgium, 0205, be
Brazil, 0218, br
Canada, 0301, ca
Chile, 0312, cl
Finland, 0609, fi
France, 0618, fr
Germany, 0405, de
Hong Kong, 0811, hk
India, 0914, in
Indonesia, 0904, id
Italy, 0920, it
Malaysia, 1325, my
Mexico, 1324, mx
Netherlands, 1412, nl
New Zealand, 1426, nz
Norway, 1415, no
Pakistan, 1611, pk
Philippines, 1608, ph
Portugal, 1620, pt
Singapore, 1907, sg
Spain, 0519, es
Sweden, 1905, se
Switzerland, 0308, ch
Taiwan, 2023, tw
Thailand, 2008, th
United Kingdom, 0702, gb
USA, 2119, us
China, 0314, cn
Japan, 1016, jp
Denmark, 0411, dk
Republic of Korea, 1118
,
kr
Russian Federation, 1821 ru
,
133
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
15
Screen sizes and disc formats
When viewing on a standard TV or monitor
Screen format of disc Setting
Appearance
16:9
4:3 (Letter Box)
4:3 (Pan & Scan)
The programme is shown in widescreen with
black bars at the top and bottom of the
screen.
The sides of the programme are cropped so
that the picture fills the whole screen.
4:3
4:3 (Letter Box)
4:3 (Pan & Scan)
The programme is presented correctly on
either setting.
When viewing on a widescreen TV or monitor
Screen format of disc Setting
Appearance
16:9
16:9
The programme is presented in widescreen.
4:3
16:9
Your TV will determine how the picture is
presented — check the manual that came
with the TV for details.
134
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Handling discs
15
Damaged discs
Discs spin at high speed inside the recorder.
If you can see that a disc is cracked,
chipped, warped, or otherwise damaged,
don’t risk using it; you could end up
damaging the recorder.
When holding discs of any type, take care
not to leave fingerprints, dirt or scratches on
the disc surface. Hold the disc by its edge or
by the center hole and edge.
Damaged or dirty discs can affect playback
and recording performance. Take care also
not to scratch the label side of the disc.
Although not as fragile as the recorded side,
scratches can still result in a disc becoming
unusable.
This recorder is designed for use with
conventional, fully circular discs only. Use of
shaped discs is not recommended for this
product. Pioneer disclaims all liability
arising in connection with the use of shaped
discs.
Should a disc become marked with
fingerprints, dust, etc., clean using a soft,
dry cloth, wiping the disc lightly from the
center to the outside edge. Do not wipe with
a circular motion.
Cleaning the pickup lens
If necessary, use a cloth soaked in alcohol,
or a commercially available CD/DVD
cleaning kit to clean a disc more thoroughly.
Never use benzine, thinner or other cleaning
agents, including products designed for
cleaning vinyl records.
The HDD/DVD recorder’s lens should not
become dirty in normal use, but if for some
reason it should malfunction due to dust or
dirt, consult your nearest Pioneer-authorized
service center. Although lens cleaners are
commercially available, we do not
recommend using them since some may
damage the lens.
Storing discs
Although CDs and DVD discs are more
durable than vinyl records, you should still
take care to handle and store discs correctly.
When you’re not using a disc, return it to its
case and store upright. Avoid leaving discs
in excessively cold, humid, or hot
environments (including under direct
sunlight).
Condensation
Condensation may form inside the recorder
if it is brought into a warm room from
outside, or if the temperature of the room
rises quickly. Although the condensation
won’t damage the recorder, it may
temporarily impair its performance. For this
reason you should leave it to adjust to the
warmer temperature for about an hour
before switching on and using.
Don’t glue paper or put stickers onto the
disc, or use a pencil, ball-point pen or other
sharp-tipped writing instrument. These
could all damage the disc.
For more detailed care information see the
instructions that come with discs.
Do not load more than one disc into the
recorder.
135
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Hints on installation
15
Moving the recorder
We want you to enjoy using this unit for years
to come, so please bear in mind the
following points when choosing a suitable
location for it:
If you need to move the recorder, first
remove the disc, if loaded, and close the disc
tray. Next, press STANDBY/ON to switch
the power to standby, checking that the
POWER OFF indication in the display goes
off. Wait at least two minutes. Lastly,
disconnect the power cord. Never lift or
move the unit during playback or recording
— discs rotate at a high speed and may be
damaged.
Do...
Use in a well-ventilated room.
Place on a solid, flat, level surface, such
as a table, shelf or stereo rack.
Don’t...
Resetting the recorder
Use in a place exposed to high
temperatures or humidity, including near
radiators and other heat-generating
appliances.
If you need to, you can reset the recorder to
all its factory settings.
1
2
Make sure that the recorder is on.
Using the front panel controls, press
Place on a window sill or other place
where the recorder will be exposed to direct
sunlight.
and hold (Stop) and press STANDBY/
ON.
The recorder turns off with all settings reset.
Use in a dusty or damp environment or
in a room where it will be exposed to
excessive cigarette smoke.
Place directly on top of an amplifier, or
other component in your stereo system that
becomes hot in use.
Use near a television or monitor as you
may experience interference — especially if
the television uses an indoor antenna.
Use in a kitchen or other room where the
recorder may be exposed to smoke or steam.
Use on a thick rug or carpet, or cover
with cloth — this may prevent proper cooling
of the unit.
Place on an unstable surface, or one that
is not large enough to support all four of the
unit’s feet.
136
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
15
Recording time
HDD (500 GB)
Specifications
XP+. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 72 h
Fine (XP) . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 106 h
Standard Play (SP). . . . . . . . . . . . . . . . . . Approx. 212 h
Long Play (LP) . . . . . . . . . . . . . . . . . . . . . Approx. 424 h
Extended Play (EP). . . . . . . . . . . . . . . . . . Approx. 638 h
Super Long Play (SLP). . . . . . . . . . . . . . . Approx. 850 h
Super Extended Play (SEP) . . . . . . . . . . Approx. 1064 h
Manual Mode (MN) . . . . . . . . . .Approx. 72 h to 1422 h
General
Power requirements
. . . . . . . . . . . . . . . . . . . . . 110 V to 240 V, 50 Hz/60 Hz
Power consumption
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 W
Power consumption in standby mode
(Front panel display: off)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.38 W
Weight
DVD-R/-RW, DVD+R/+RW, DVD-RAM
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.6 kg
Dimensions
. . . . . . . . . . . .420 mm (W) x 77 mm (H) x 355 mm (D)
Operating temperature
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5 °C to +35 °C
Operating humidity
. . . . . . . . . . . . . . . . . . . 5 % to 85 % (no condensation)
TV system
Taiwan and Philippines model . . . . . . . . . . . . . . . . NTSC
Other . . . . . . . . . . . . . . . . . . . . . . . PAL/SECAM/NTSC
Fine (XP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . Approx. 1 h
Standard Play (SP). . . . . . . . . . . . . . . . . . . . Approx. 2 h
Long Play (LP) . . . . . . . . . . . . . . . . . . . . . . . Approx. 4 h
Extended Play (EP). . . . . . . . . . . . . . . . . . . . Approx. 6 h
Super Long Play (SLP). . . . . . . . . . . . . . . . . Approx. 8 h
Super Extended Play (SEP) . . . . . . . . . . . . Approx. 10 h
(DVD-R/-RW, DVD-RAM only)
Manual Mode (MN)
DVD-R/-RW/-RAM. . . . . . . . . . . . .Approx. 1 h to 13 h
DVD+R/+RW . . . . . . . . . . . . . . . . .Approx. 1 h to 8 h
Readable discs
DVD-R DL/DVD+R DL
DVD-Video, DVD-RW, DVD-R, DVD+R, DVD+RW,
DVD-RAM, Video CD, Super VCD, CD, CD-R/-RW
(WMA, MP3, JPEG, CD-DA, DivX)
Fine (XP) . . . . . . . . . . . . . . . . . . . . . . . Approx. 1 h 51 m
Standard Play (SP). . . . . . . . . . . . . . . Approx. 3 h 35 m
Long Play (LP) . . . . . . . . . . . . . . . . . . Approx. 7 h 11 m
Extended Play (EP). . . . . . . . . . . . . . Approx. 10 h 46 m
Super Long Play (SLP). . . . . . . . . . . Approx. 14 h 21 m
Super Extended Play (SEP) . . . . . . . Approx. 17 h 57 m
(DVD-R DL only)
Recording discs and formats
DVD-R/-RW: VR mode and Video mode
DVD+R/+RW: +VR mode
DVD-RAM: VR mode
Manual Mode (MN)
DVD-R DL: VR mode and Video mode
DVD+R DL: +VR mode
DVD-R DL . . . . . . . . . . . . . . Approx. 1 h 51 m to 24 h
DVD+R DL . . . . . . . . Approx. 1 h 51 m to 14 h 21 m
Video recording format
Sampling frequency . . . . . . . . . . . . . . . . . . . . 13.5 MHz
Compression format . . . . . . . . . . . . . . . . . . . . . . .MPEG
Timer
Programmes. . . . . . . . . . . . . 1 month/32 programmes
Clock
Audio recording format
Taiwan and Philippines model. . . . . . . . . . . . Quartz lock
1
Sampling frequency . . . . . . . . . . . . . . . . . . . . . . 48 kHz
Compression format . . . . Dolby Digital or Linear PCM
(uncompressed)
(12-hour digital display )
Other . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quartz lock
(24-hour digital display)
Note
137
En
1 If the country is set to Philippines the clock switches to 24 hour display.
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
15
Tuner
Input/Output
VHF/UHF antenna input/output terminal
Taiwan and Philippines model . . . VHF/UHF set 75 Ω
(F-shape connector)
Receivable channels
Taiwan and Philippines model:
Other . . . . . . . . . VHF/UHF set 75 Ω (IEC connector)
Video Input 1 (rear), 2 (front), 3 (rear)
Input level . . . . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p (75 Ω)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jacks
Video Output 1, 2
NTSC-M/N
Frequency
Channel
VHF
UHF
CATV
55 MHz to 218 MHz
471 MHz to 808 MHz
2 to 13
14 to 69
STEREO
M/N - BTSC
72 MHz to 806 MHz C1 to C125
Output level . . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p (75 Ω)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jacks
S-Video Input 1 (rear), 2 (front), 3 (rear)
Y (luminance) - Input level. . . . . . . . . . . . .1 Vp-p (75 Ω)
C (colour) - Input level
Taiwan and Philippines model . . . . 286 mVp-p (75 Ω)
Other . . . . . . . . . . . . . . . . . . . . . . . . 300 mVp-p (75 Ω)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-pin mini DIN
S-Video Output 1, 2
Other:
SECAM B/G
PAL B/G
PAL I
Frequency
Channel
E2 to E4
X to Z
Frequency
Channel
A to C
X to Z
D to J
11, 13
VHF (low)
VHF (high)
47 MHz to 89 MHz
44 MHz to 89 MHz
104 MHz to 300 MHz E5 to E12 104 MHz to 300 MHz
S1 to S20
M1 to M10
U1 to U10
S1 to S20
Y (luminance) - Output level . . . . . . . . . . .1 Vp-p (75 Ω)
C (colour) - Output level
Hyper
UHF
302 MHz to 470 MHz S21 to S41 302 MHz to 470 MHz S21 to S41
470 MHz to 862 MHz E21 to E69 470 MHz to 862 MHz E21 to E69
Taiwan and Philippines model . . . . 286 mVp-p (75 Ω)
Other . . . . . . . . . . . . . . . . . . . . . . . . 300 mVp-p (75 Ω)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-pin mini DIN
Component video output
SECAM D/K
PAL D/K
Frequency
Channel
VHF (low)
VHF (high)
49 MHz to 94 MHz
R1 to R5
104 MHz to 300 MHz R6 to R12
S1 to S20
302 MHz to 470 MHz S21 to S41
470 MHz to 862 MHz E21 to E69
Output level . . . . . . . . . . . . . . . . . . . . Y: 1.0 Vp-p (75 Ω)
P , P : 0.7 Vp-p (75 Ω)
B
R
Hyper
UHF
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jacks
Audio Input 1 (rear), 2 (front), 3 (rear) L/R
During audio input. . . . . . . . . . . . . . . . . . . . . . . 2 V rms
(Input impedance: more than 22 kΩ)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jacks
Audio Output 1, 2 L/R
STEREO
B/G - A2
I - NICAM
B/G - NICAM
D/K - NICAM
M/N - BTSC
NTSC-M/N
Frequency
Channel
VHF
UHF
CATV
55 MHz to 218 MHz
471 MHz to 808 MHz
2 to 13
14 to 69
72 MHz to 806 MHz C1 to C125
During audio output . . . . . . . . . . . . . . . . . . . . . 2 V rms
(Output impedance: less than 1.5 kΩ)
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jacks
Other connections
Control input . . . . . . . . . . . . . . . . . . . . . . . . . . Mini jack
Digital audio output. . . . . . . . . . . . . . . . . . . . . . Coaxial
DV input . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-pin (front)
(i.LINK/IEEE 1394 standard)
USB. . . . . . . . . . . . . . . . . .Type A (front), Type B (front)
HDMI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-pin
Supplied accessories
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Dry cell batteries (AA/R6P) . . . . . . . . . . . . . . . . . . . . . .2
Audio/Video cable (red/white/yellow). . . . . . . . . . . . . .1
RF antenna cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Operating Instructions
Note: The specifications and design of this product are
subject to change without notice, due to improvement.
®
This product includes FontAvenue fonts licenced
by NEC Corporation. FontAvenue is a registered
trademark of NEC Corporation.
Microsoft product screen shots reprinted with
permission from Microsoft Corporation.
138
En
Download from Www.Somanuals.com. All Manuals Search And Download.
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
K002_B_En
Published by Pioneer Corporation.
Copyright © 2007 Pioneer Corporation.
All rights reserved.
<VRB1477-A>
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|