DVD Player
DV-45A
Operating Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER-CORD PROTECTION — Power-supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, convenience
receptacles, and the point where they exit from
the product.
OUTDOOR ANTENNA GROUNDING — If an
outside antenna or cable system is connected
to the product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of
the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of
antenna-discharge unit, connection to
DAMAGE REQUIRING SERVICE — Unplug this
product from the wall outlet and refer servicing
to qualified service personnel under the
following conditions:
• When the power-supply cord or plug is
damaged.
• If liquid has been spilled, or objects have fallen
into the product.
• If the product has been exposed to rain or
water.
• If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the
operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to its normal operation.
• If the product has been dropped or damaged in
any way.
• When the product exhibits a distinct change in
performance — this indicates a need for
service.
REPLACEMENT PARTS — When replacement
parts are required, be sure the service
technician has used replacement parts
specified by the manufacturer or have the
same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
SAFETY CHECK — Upon completion of any
service or repairs to this product, ask the
service technician to perform safety checks to
determine that the product is in proper
operating condition.
grounding electrodes, and requirements for the
grounding electrode. See Figure A.
LIGHTNING — For added protection for this
product during a lightning storm, or when it is
left unattended and unused for long periods of
time, unplug it from the wall outlet and
disconnect the antenna or cable system. This
will prevent damage to the product due to
lightning and power-line surges.
POWER LINES — An outside antenna system
should not be located in the vicinity of
overhead power lines or other electric light or
power circuits, or where it can fall into such
power lines or circuits. When installing an
outside antenna system, extreme care should
be taken to keep from touching such power
lines or circuits as contact with them might be
fatal.
WALL OR CEILING MOUNTING — The product
should not be mounted to a wall or ceiling.
OVERLOADING — Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
HEAT — The product should be situated away
from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat.
OBJECT AND LIQUID ENTRY — Never push
objects of any kind into this product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the product.
SERVICING — Do not attempt to service this
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
ANTENNA
LEAD IN WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
Fig. A
NEC — NATIONAL ELECTRICAL CODE
[For U.S. model]
IMPORTANT NOTICE
WARNING:TOPREVENTFIREORSHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE
The serial number for this equipment is located
on the rear panel. Please write this serial
number on your enclosed warranty card and
keep it in a secure area. This is for your
security. H006A_En
TO RAIN OR MOISTURE.
H001_En
Download from Www.Somanuals.com. All Manuals Search And Download.
[For Canadian model]
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
CAUTION: TO PREVENT ELECTRIC SHOCK, DO
NOT USE THIS (POLARIZED) PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION: POUR PREVENIR LES CHOCS
ELECTRIQUES NE PAS UTILISER CETTE FICHE
POLARISEE AVEC UN PROLONGATEUR UNE
PRISE DE COURANT OU UNE AUTRE SORTIE
DE COURANT, SAUF SI LES LAMES PEUVENT
ETRE INSEREES A FOND SANS EN LAISSER
AUCUNE PARTIE A DECOUVERT.
H007A_2L
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
[For Canadian model]
This Class B digital apparatus complies with
Canadian ICES-003.
[Pour le modèle Canadien]
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
H009_2L
[For U.S. model]
ENERGY STAR® and
ENERGY STAR
certification mark are
registered US marks.
– Consult the dealer or an experienced radio/
TV technician for help.
H010_En
K001B_En
Information to User
Alteration or modifications carried out without
appropriate authorization may invalidate the
user's right to operate the equipment. H011_En
This product is for general household purposes.
Any failure due to use for other than household
purposes (such as long-term use for business
purposes in a restaurant or use in a car or ship)
and which requires repair will be charged for
CAUTION:
even during the warranty period.
K041_En
This product satisfies FCC regulations when
shielded cables and connectors are used to
connect the unit to other equipment. To
prevent electromagnetic interference with
electric appliances such as radios and
televisions, use shielded cables and connec-
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
tors for connections.
H012_En
CAUTION
• Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous
radiation exposure.
• The use of optical instruments with this
This product includes FontAvenue® fonts
licenced by NEC corporation. FontAvenue is
a registered trademark of NEC Corporation.
product will increase eye hazard.
H013_En
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to
operate your model properly. After you have finished reading the instructions, put
them away in a safe place for future reference.
04 Getting Started
01 Before You Start
Features ..............................................................8
Let’s Get Started .........................................24
What’s in the box ...............................................9
Putting the batteries in the remote control .....9
Disc / Content Format Playback
Compatibility ................................................... 10
Front panel controls .................................. 29
CD-R/RW Compatibility ............................ 10
DVD disc menus .........................................29
Compressed Audio Compatibility .............10
PC Created Disc Compatibility ..................11
Titles, chapters, Groups and tracks ......... 11
DVD-Video regions..................................... 11
05 Playing Discs
Introduction ..................................................... 33
the contents of a disc ..................................... 33
Using repeat play ............................................ 38
Searching a disc ..............................................43
Switching subtitles ..........................................44
Switching DVD-RW audio channel ............... 45
Switching DVD-Audio audio channel ........... 45
02 Connecting Up
Rear panel........................................................ 12
Using other types of video output.................. 14
Connecting using an S-Video output ........14
Connecting using the
Connecting for multichannel surround
Connecting using the multichannel analog
Connecting using a digital output ........... 16
Controlling this player from another Pioneer
About progressive scan video .................. 19
Display ............................................................. 20
Remote control ................................................ 21
channel .............................................................45
Switching camera angles................................45
Displaying disc information ............................46
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Changing your password .................... 60
Setting/changing the
Audio DRC ........................................................47
Virtual Surround ...............................................48
Channel Level ...................................................49
Setting/changing the CountryCode ....61
Auto Disc Menu ..........................................62
DVD Playback Mode.................................. 63
CD Playback ............................................... 64
Speaker Distance ...................................... 65
Channel Level..............................................66
07 The Video Settings Menu
Video Adjust..................................................... 51
presets ........................................................ 51
Creating your own progressive output
presets ........................................................ 52
Using the Initial Settings menu ......................53
Digital Audio Out settings .............................. 53
Dolby Digital Out ....................................... 53
DTS Out .......................................................54
Linear PCM Out ..........................................54
Video Output settings ..................................... 55
TV Screen ................................................... 55
S-Video Out................................................. 55
Still Picture ................................................. 56
Audio Language .........................................56
Subtitle Language ..................................... 57
DVD Menu Language .................................58
Subtitle Display .......................................... 58
Display settings ............................................... 58
OSD Language........................................... 58
Angle Indicator .......................................... 59
Background ............................................... 59
Screen Saver ...............................................59
Options............................................................. 59
Parental Lock ..............................................59
Taking care of your player and discs ..............68
Handling discs ........................................... 68
Storing discs ...............................................68
Cleaning the pickup lens ...........................69
Problems with condensation .................... 69
Hints on installation .................................. 69
Moving the player ...................................... 69
Screen sizes and disc formats ....................... 70
Standard TV users ..................................... 70
About the audio output settings .................... 71
Country code list ..............................................72
Glossary ............................................................73
Troubleshooting............................................... 75
Specifications ...................................................79
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
01
Before You Start
Features
Super Fine Focus digital filter
This improves the quality of the video output
by reducing video noise and increasing the
horizontal resolution to 540 lines (see page
51).
DVD-Audio and SACD compatible
Experience the super high-quality audio
performance of DVD-Audio and Super Audio
CD (SACD).
MP3 compatibility
The on-board 24-bit/192kHz DAC means that
this player is fully compatible with high
sampling-rate discs, capable of delivering
exceptional sound quality in terms of
dynamic range, low-level resolution and
high-frequency detail.
This player is compatible with CD-R, CD-RW
and CD-ROM discs that contain MP3 audio
tracks (see pages 10-11).
Graphical on-screen displays
Setting up and using your DVD player is
made very easy using the graphical on-
screen displays.
Built-in Dolby*1 Digital and DTS*2
decoding with multichannel out-
puts
Energy saving design
R
This unit is designed to use 0.3 W of power
when in standby mode.
Logos:
1
This player features multichannel analog
outputs for connection to an AV amplifier to
give you stunning surround sound from
Dolby Digital, DTS and multichannel DVD-
Audio discs.
*1 Manufactured under license from Dolby Laborato-
ries. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
*2 “DTS” and “DTS Digital Surround” are registered
TruSurround*3 and Virtual Dolby
Digital
trademarks of Digital Theater Systems, Inc.
*3 TruSurround and the
® symbol are trademarks
of SRS Labs, Inc. TruSurround technology is incorporated
under license from SRS Labs, Inc.
Logo:
TruSurround/Virtual Dolby Digital creates a
realistic surround-sound effect from any
Dolby Digital source using just two speakers
(see page 48).
PureCinema progressive scan
When connected to a progressive scan-
compatible TV or monitor using the compo-
nent video outputs, you can enjoy extremely
stable, flicker free images, with the same
frame refresh rate as the original movie (see
page 50).
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start
What’s in the box
01
Please confirm that the following accesso-
ries are in the box when you open it.
Incorrect use of batteries can result in
hazards such as leakage and bursting.
Please observe the following:
• Remote control
• AA/R6P dry cell batteries x2
• Stereo audio cable (red/white plugs)
• Video cable (yellow plugs)
• Power cable
• Don’t mix new and old batteries
together.
• Don’t use different kinds of battery
together—although they may look
similar, different batteries may have
different voltages.
• These operating instructions
• Warranty card
• Make sure that the plus and minus ends
of each battery match the indications in
the battery compartment.
Putting the batteries in the
remote control
• Remove batteries from equipment that
isn’t going to be used for a month or
more.
1
Open the battery compartment cover
on the back of the remote control.
• When disposing of used batteries,
please comply with governmental
regulations or environmental public
instruction’s rules that apply in your
country or area.
H048 En
2
Insert two AA/R6P batteries into the
battery compartment following the
indications (ª, ·) inside the compart-
ment.
Using the remote control
Keep in mind the following when using the
remote control:
• Make sure that there are no obstacles
between the remote and the remote
sensor on the unit.
• The remote has a range of about 23 ft.
(7 meters)
• Remote operation may become unreli-
able if strong sunlight or fluorescent
light is shining on the unit’s remote
sensor.
3
Close the cover.
• Remote controllers for different devices
can interfere with each other. Avoid
using remotes for other equipment
located close to this unit.
• Replace the batteries when you notice a
fall off in the operating range of the
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
01
Before You Start
CD-R/RW Compatibility
Disc / Content Format Play-
back Compatibility
General Disc Compatibility
• This player was designed and engi-
neered to be compatible with software
containing one or more of the following
logos.
• This unit will play CD-R and CD-RW
discs recorded in CD Audio, Video CD,
or MP3 audio formatting. However, any
other content may cause the disc not to
play, or create noise/distortion in the
output.
• This unit cannot record CD-R or CD-RW
discs.
• Un-finalized CD-R/RW discs recorded in
CD Audio can be played, but not all
Table of Contents (playing time, etc..)
will be displayed.
DVD-Audio DVD-Video
DVD-R
CD-R
DVD-RW
CD-RW
DVD-R/RW Compatibility
• This unit will play DVD-R/RW discs that
were recorded using the DVD Video
format.
Audio CD
Video CD
• This unit will play DVD-RW discs that
were recorded using the Video Record-
ing format.
Super Audio CD
• Other formats, including but not limited
to the following, are not playable in this
player:
• This unit cannot record DVD-R/RW
discs.
• Un-finalized DVD-R/RW discs cannot be
played in this player.
Photo CD / DVD-RAM / DVD-ROM /
CD-ROM
Compressed Audio Compatibility
• This unit will play compressed audio
files formatted in the MPEG-1 Audio
Layer 3 format (MP3) with a 44.1 or
48kHz fixed bit rate. Incompatible files
will not play and “UNPLAYABLE” will be
displayed on the unit.
(except those that contain MP3 files
formatted as specified in the “Com-
pressed Audio Compatibility” section)
• DVD-R/RW and CD-R/RW discs (Audio
CDs and Video CDs) recorded using a
DVD Recorder, CD Recorder or Personal
Computer may not be playable on this
machine. This may be caused by a
number of possibilities, including but
not limited to: the type of disc used; the
type of recording; or damage, dirt or
condensation on either the disc or the
player’s pick-up lens.
• Variable Bit-Rate (VBR) files are
playable, but playing time may not be
shown correctly.
• The CD-ROM used to compile your MP3
files must be ISO 9660 Level 2 compli-
ant.
Special note about particular formats or
software follows below:
• CD physical format: Mode1, Mode2 XA
Form1.
• This player only plays tracks that are
named with the file extension “.mp3” or
“.MP3”.
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start
01
• This player is compatible with multi-
session discs, but only plays sessions
that are closed.
DVD-Audio discs are divided into one or
more groups that can each contain a
number of tracks.
• Use CD-R or CD-RW media for record-
ing your MP3 files.
Group 1
Track 1
Group 2 Group 3
• This player can recognize a maximum of
250 folders or 250 tracks. Discs contain-
ing more than 250 folders or 250 tracks
will play, but only the first 250 folders /
tracks.
Track 2
Track 3
Track 1
Track 1
Track 2
CDs, SACDs and Video CD are divided into
tracks.
• Folder and track names (excluding the
“.mp3” extension) are displayed.
• There are many different recording bit-
rates available to encode your MP3 files.
This unit was designed to be compatible
with all of them. Audio encoded at
Track 1 Track 2 Track 3 Track 4 Track 5 Track 6
128Kbps should sound close to regular
CD Audio quality. This player will play
lower bit-rate MP3 tracks, but please
note that the sound quality becomes
noticeably worse at lower bit-rates.
CD-ROMs containing MP3 files are divided
into folders and tracks. Folders may also
contain further subfolders.
PC Created Disc Compatibility
• If you record a disc using a Personal
Computer, even if it is recorded in a
“compatible format” as listed above,
there will be cases in which the disc
may not be playable in this machine due
to the setting of the application software
used to create the disc. In these
particular incidences, check with the
software publisher for more detailed
information.
Folder A
Track 1
Folder B Folder C
Track 2
Track 3
Track 1
Track 1
Track 2
DVD-Video regions
All DVD-Video discs carry a region mark on
the case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD player also has a region
mark, which you can find on the rear panel.
Discs from incompatible regions will not play
in this player. Discs marked ALL will play in
any player.
• DVD-R/RW and CD-R/RW software disc
boxes also have additional compatibility
information.
The diagram below shows the various DVD
regions of the world.
Titles, chapters, Groups and tracks
DVD-Video discs are generally divided into
one or more titles. Titles may be further
subdivided into chapters.
1
5
2
1
6
2
3
4
5
Title 1
Title 2
Title 3
2
4
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Connecting Up
Rear panel
1
2
3
4
5
6
7
8
CENTER
L
OPTICAL COAXIAL
L
AUDIO OUT
(5.1ch)
IN
OUT
Y
P
B
PR
R
SUB
WOOFER
RSURROUND
FRONT
DIGITAL AUDIO
OUT
AUDIO
OUT
(2ch)
CONTROL
S-VIDEO
OUT
VIDEO
OUT
COMPONENT VIDEO OUT
When connecting this player up to your
TV, AV receiver or other components,
make sure that all components are
switched off and unplugged.
6
VIDEO OUT
Standard video output(s) that you can
connect to your TV or AV receiver using the
supplied audio/video cable (pages 13, 15, 16)
.
1
CONTROL IN / OUT
7
COMPONENT VIDEO OUT
For passing remote control signals to other
Pioneer components (page 17).
High quality video output for connection to a
TV, monitor or AV receiver that has compo-
nent video inputs.
2
DIGITAL AUDIO OUT – OPTICAL /
Connect using a commercially available
three-way component video cable. Be careful
to match the colors of the jacks and cables
for correct connection (page 14).
COAXIAL
Digital audio outputs for connection to a
PCM, Dolby Digital, DTS and/or MPEG-
compatible AV receiver (page 16).
8
AC IN
3
AUDIO OUT (2ch)
Connect the supplied power cord here, then
plug into a power outlet.
Two channel analog audio outputs for
connection to your TV, AV receiver or stereo
system (pages 13, 15, 16).
4
AUDIO OUT (5.1ch)
Multichannel analog audio outputs for
connection to an AV receiver with
multichannel inputs (page 15).
• You may find it useful to have the
manuals supplied with your other
components handy when connecting
this player.
5
S (S-Video output)
• If you come across any unfamiliar terms
in this section of the manual, take a look
at the Glossary starting on page 73.
S-Video output(s) that you can use instead of
the video output described in 6 below (page
14).
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Up
02
Easy connections
To power outlet
The setup described here is a basic setup
that allows you to play discs using just the
cables supplied with the player. In this setup,
stereo audio is played through your TV.
See the next page if you want to use an
S-Video or component or a connection.
• If you need another pair of stereo
outputs (and don’t need to use the
multichannel analog outputs), you can
use the AUDIO OUT (5.1ch) FRONT
L / R jacks (page 15).
• This player is equipped with copy
protection technology. Do not connect
this player to your TV via a VCR using AV
cables, as the picture from this player
will not appear properly on your TV. (This
player may also not be compatible with
some combination TV/VCRs for the
same reason; refer to the manufacturer
for more information.)
2
Connect the supplied AC power cord
to the AC IN inlet, then plug into a power
outlet.
• Before unplugging the player from the
power outlet, make sure you first switch
it into standby using either the front
panel STANDBY/ON button, or the
remote control, and wait of the -OFF-
message to disappear from the player’s
display.
1
Connect the VIDEO OUT and AUDIO
OUT (2ch) jacks to a set of A/V inputs on
your TV.
Use the supplied red/white stereo audio and
yellow video cable. Make sure you match up
the left and right audio outputs with their
corresponding inputs for correct stereo
sound.
• For the above reasons, do not plug this
player into a switched power supply
found on some amplifiers and AV
receivers.
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Connecting Up
Using other types of video
output
• If you connect both S-video jacks, but
one of the connected components is not
S1/S2 compatible, the automatic aspect
ratio switching will not work with either
connected component.
This player has standard (composite),
S-Video and component video outputs. The
main difference between them is the quality
of the picture.
S-Video delivers a better picture than
standard composite video, while component
video gives better picture quality still. The
variety of outputs also gives you the flexibility
of connecting your particular equipment
using the best connection type available.
Connecting using the component
video output
You can use the component video output
instead of the standard video out jack to
connect this player to your TV (or other
equipment).
Connecting using an S-Video
1
Use a component video cable (not
output
supplied) to connect the COMPONENT
VIDEO OUT jacks to a component video
input on your TV, monitor or AV receiver.
You can use the S-Video output instead of the
VIDEO OUT jack to connect this player to
your TV (or other equipment).
1
Use an S-Video cable (not supplied)
to connect the S-VIDEO OUTPUT to an
S-Video input on your TV, monitor or
AV receiver.
Line up the small triangle above the jack with
the same mark on the plug before plugging
in.
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Up
02
Connecting for multichannel
surround sound
You can connect this player to your AV
receiver using the multichannel analog
outputs or one of the digital outputs.
In addition to these connections, you should
also connect the 2 channel analog outputs
for compatibility with all discs.
You’ll probably also want to connect a video
output to your AV receiver. You can use any
of the video outputs available on this player
(the illustration shows a standard (compos-
ite) connection).
Connecting using the
2
Connect the analog AUDIO OUT L/R
and VIDEO OUTPUT jacks on this player
to a set of analog audio and video inputs
on your AV receiver.
multichannel analog outputs
If your AV receiver has 5.1 channel analog
inputs, we recommend connecting this
player to it using the multichannel analog
outputs. Doing this will ensure that you can
enjoy all kinds of disc, including Dolby
Digital and DTS DVD-Video discs, as well as
high sampling rate and multichannel DVD-
Audio and SACD discs.
1
Connect the MULTICHANNEL AUDIO
outputs on this player to the multi-
channel audio inputs on your AV receiver.
It’s convenient to use three stereo audio
cables; one for the FRONT, one for the
SURROUND and one for the CENTER and
SUBWOOFER channels.
The diagram shows standard video connec-
tions, but you can alternatively use the
S-Video or component video connections if
they’re available.
3
Connect the AV receiver’s video
output to a video input on your TV.
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
02
Connecting Up
• When inserting the plug, the protective
shutter will open and you should hear
the plug click into position when fully
inserted. Take care not to force the plug
as this may damage the shutter, the
cable and/or the player.
• You usually have to connect the same
kind of video cable between your DVD
player and AV receiver, and between
your AV receiver and TV.
For a coaxial connection, use a coaxial cable
(similar to the supplied video cable) to
connect the COAXIAL DIGITAL OUT jack to
a coaxial input on your AV receiver.
Connecting using a digital output
You can also connect this player to your AV
receiver using one of the digital outputs.
There are both coaxial and optical digital
jacks; use whichever is convenient.
2
Connect the analog AUDIO OUT L/R
and VIDEO OUTPUT jacks on this player
to a set of analog audio and video inputs
on your AV receiver.
We recommend also connecting this player
to your AV receiver using a stereo analog
connection.
1
Connect one of DIGITAL OUT jacks on
this player to a digital input on your AV
receiver.
The diagram shows standard video connec-
tions, but you can alternatively use the
S-Video or component video connections if
they’re available.
3
Connect the AV receiver’s video
output to a video input on your TV.
This enables you to listen to multichannel
surround sound.
For an optical connection, use an optical
cable (not supplied) to connect the OPTICAL
DIGITAL OUT jack to an optical input on
your AV receiver.
• You usually have to connect the same
kind of video cable between your DVD
player and AV receiver, and between
your AV receiver and TV.
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Up
02
Controlling this player from
another Pioneer component
• My TV doesn’t have any inputs to
connect the DVD player. How can I watch
DVDs?
This player has SR jacks which allow you to
use the remote sensor on one Pioneer
component to control another.
Unfortunately, if your TV has no inputs
you can’t use this player with it.
Use a mini-jack plug to connect the
CONTROL OUT of one component to the
CONTROL IN of another. In this way you can
daisy-chain several components together.
• My VCR is already connected to my TV, so
there aren’t any spare inputs. What
should I do?
If all your TV’s inputs are already in use,
you can buy a video input selector from
an electronics store, which effectively
gives you more inputs.
• My TV only has one input for the sound.
What should I plug it into?
If you don’t mind mono sound, you can
buy a stereo RCA-to-mono RCA cable
from an electronics store. Connect the
stereo end to this player and the mono
end to your TV.
If you want stereo sound, connect this
player to your amplifier or stereo system
using a stereo audio cable.
• I connected the DVD player to my AV
receiver, and although the sound is fine,
there’s no picture. What did I do wrong?
Make sure that the type of video
connection from the DVD player to your
AV receiver is the same as that from the
receiver to your TV. Most AV receivers
won’t convert from one kind of connec-
tion to another.
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Controls and Displays
Front panel
1
4
2
3
5
6
7
8
OPEN/CLOSE
0
3
PLAY
STANDBY/ON
PROGRESSIVE VIDEO OFF
7
8
41 ¡¢
3
Î
13
12
11
10 9
8
3
1
STANDBY/ON
Press to switch the player on or into standby
Press to start or resume playback
2
PROGRESSIVE button/indicator
9 ¡ ¢
Press to switch the progressive video output
mode between progressive and interlace.
The indicator lights in progressive scan
mode. See page 19 for more information.
• Press and hold for fast forward scanning
• Press to jump to the next chapter or track
10 4 1
• Press and hold for fast reverse scanning
3
VIDEO OFF button/indicator
• Press to jump back to the beginning of the
current chapter or track, then to previous
chapters/tracks
Press to switch the video output on/off. The
indicator lights when the video output is
switched off (when listening to a DVD-Audio
disc, for example)
11 Display
See page 20 for a description of the display
4
5
Disc tray
12 Remote control sensor
The remote control has a range of up to
about 23ft. (7m )
0 OPEN/CLOSE
Press to open or close the disc tray
6
7
Press to stop the disc (you can resume
playback by pressing 3 (play))
13
This mark indicates compatibility with DVD-
RW discs recorded on a DVD recorder in
Video Recording mode.
7
8
Press to pause playback. Press again to
restart
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Displays
03
Compatibility of this unit with progres-
sive-scan TVs.
This player is compatible with progressive
video Macro Vision System Copy Guard.
About progressive scan video
Compared to interlace video, progressive
scan video effectively doubles the scanning
rate of the picture, resulting in a very stable,
flicker-free image.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR
TV SET COMPATIBILITY WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.
Progressive scan video is available only from
the component video output. Use the
PROGRESSIVE button on the front panel to
switch the component video output between
interlace and progressive. With a DVD-Video
disc you can do this during playback, or
when the disc is stopped. For other types of
disc, the player must be stopped.
• This player is compatible with the
following Pioneer displays and monitors:
PDP-5030HD, PRO-1000HD, PRO-
800HD, PDP-4330HD, PRO-720HD,
PRO-620HD, PRO-520HD, SD-643HDS,
SD-533HDS.
• If you connect a TV that is not compat-
ible with a progressive scan signal and
switch the player to progressive, you will
not be able to see any picture at all. In
this case, press the PROGRESSIVE
button on the front panel to switch back
to interlace (the PROGRESSIVE indica-
tor should be unlit).
• When set to progressive, there is no
video output from the VIDEO and
S-VIDEO jacks. If you want to display
video on more than one monitor
simultaneously, make sure that the
video output is set to interlace.
• Some TVs display 4:3 material incor-
rectly in progressive scan mode. This
player has an Auto Progressive setting
to correct this problem. See page 55 for
more information.
• You can’t switch the video output when
an OSD is on-screen.
• The picture on some TVs may momen-
tarily break up when you switch the
video output of this player.
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Controls and Displays
Display
1
2
3
4
5
6
7
8
9
10
11
16
15 14 13
12
1
5.1CH
9
TRK
Lights when analog 5.1 channel output is
selected (page 64)
Indicates that the character display is
showing a track number
2
V-PART
10 CHP
Lights when playing a video part of a DVD
disc
Indicates that the character display is
showing a DVD chapter number
3
PRGSVE
11 REMAIN
Lights when the video output is progressive
scan (pages 18, 19)
Lights when the character display is showing
the time or number of tracks/titles/chapters
remaining
4
12 Character display
Lights during multi-angle scenes on a DVD
disc (page 45)
13 8
Lights when a disc is paused
5
GUI (Graphical User Interface)
Lights when a menu is displayed on-screen
14 3
Lights when a disc is playing
6
GRP
Indicates that the character display is
showing a DVD-Audio group number
15 2D
Lights when a Dolby Digital soundtrack is
playing
7
TITLE
Indicates that the character display is
showing a DVD-Video title number
16 DTS
Lights when a DTS soundtrack is playing
8
Lights when 2V/TruSurround is active
(page 48)
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Displays
Remote control
03
5
ENTER & Joystick
Use to navigate on-screen displays and
menus. Press ENTER to select an option or
execute a command
• Buttons 6 to 9 and 20 to 22 glow slightly
in the dark for ease of use.
6
(RETURN)
Press to return to a previous menu screen
13
7
V.ADJ (VIDEO ADJUST )
OPEN /
CLOSE
1
Press to display the Video Adjust menu
14
DISPLAY AUDIO SUBTITLE ANGLE
(pages 51–52)
2
15
SETUP
TOP MENU
16
3
MENU
4
–
MULTI SPEED
+
17
8
7
Press to stop the disc (you can resume
playback by pressing 3 (play))
ENTER
18
5
9
3
Press to start or resume playback
VIDEO
RETURN ADJUST DIMMER JOG MODE
19
21
V.ADJ
FL
JOG
20
22
23
6
8
10 4 ¢
Press to jump to the start of the previous /
next chapter / track
7
9
7
3
8
/
E E/
4
¢
1
¡
10
PLAY MODE SURROUND
24
26
11
CLEAR
11 PLAY MODE
1
4
7
2
5
8
3
6
9
C
ENTER
25
Press to display the Play Mode menu
(pages 37–43) (You can also get to the Play
Mode menu by pressing SETUP and select-
ing Play Mode)
E
0
12
TV CONTROL
+
27
28
FUNC
+
VOLUME CHANNEL
TV
–
–
12 Number buttons
13 MENU
Press to display a DVD disc menu, or the
Disc Navigator if a DVD-RW, CD, Video CD or
MP3 disc is loaded
1
(STANDBY/ON)
Press to switch the player on or into standby
14 0 OPEN/CLOSE
Press to open or close the disc tray
2
DISPLAY
Press to display information about the disc
playing (page 46)
15 ANGLE
Press to change the camera angle during
DVD multi-angle scene playback (page 45)
3
AUDIO
Press to select the audio channel or
language (pages 44-45)
16 SUBTITLE
Press to select a subtitle display (page 44)
4
SETUP
17 TOP MENU
Press to display the top menu of a DVD disc
Press to display (or exit) the on-screen
display
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
03
Controls and Displays
18 MULTI DIAL
Use for scanning and slow motion control
(page 35)
28
TV
Press TV to turn the TV’s power on or put
in to standby
19 Jog indicator
Lights when multi dial is in jog mode (page
35)
Setting up the Remote Control to
TV
This most be set to use buttons 27 and 28.
20 JOG (JOG MODE)
1. Input the Manufacturer code.
Press to put switch jog mode on/off. When
on, use the MULTI DIAL to advance or
reverse frames (page 35)
While holding down the CLEAR button, input
the two digit code from the table next page
that corresponds to the make of your TV.
For example, If you have a Pioneer TV, press
and hold CLEAR, then press 0, 0 on the
remote control.
21 FL (DIMMER)
Press to change the display brightness
22 8
2. Confirm that the TV is responding to
the programmed code.
Press to pause playback; press again to
restart
On the remote, press the TV button. If the
TV switches on (or into standby if it was on
previously), then you have the correct code.
/e
E/
/ ¡ and
23 1 and
Use for reverse / forward slow motion
playback, frame reverse / advance and
reverse / forward scanning. See page 36
If nothing happens when you press the TV
button, start again from step 1 using a
different code.
24 SURROUND
Press to activate/switch off 2V/TruSurround.
See page 48
• Some manufacturers have several
codes. Try each one until you find the
one that works.
25 CLEAR
Press to clear a numeric entry
Preset code list
00, PIONEER1
01, RCA1
02, SHARP3
03, ZENITH1
04, SONY
05, TOSHIBA1
06, HITACHI1
07, PHILIPS
08, PANASONIC1
09, MITSUBISHI
10, GOLDSTAR1
11, GE1
12, MAGNAVOX1
13, JVC1
14, SANYO2
15, RCA2
16, RCA3
17, RCA4
18, RCA5
26 ENTER
Press to select an option or execute a
command
19, SHARP1
20, ZENITH12
21, SANYO1
22, PANASONIC2
23, GOLDSTAR2
24, HITACHI2
25, HITACHI3
26, TOSHIBA2
27, SHARP2
28, GE2
29, MAGNAVOX2
30, TOSHIBA3
31, HITACHI4
32, JVC2
27 TV CONTROL buttons
VOLUME
Use to adjust the volume
CHANNEL
Use to select TV channel
FUNC
Press FUNC to select the TV for remote
control operation
33, FUJITSU
34, PIONEER2
35, GRANDIENTE
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Switching on
04
After making sure that everything is con-
nected properly and that the player is
plugged in, press STANDBY/ON on the
front panel, or on the remote control to
switch the player on.
Also, switch on your TV and make sure that it
is set to the input you connected the DVD
player to.
STANDBY/ON
OPEN/CLOSE
0
STANDBY/ON
PROGRESSIVE VIDEO OFF
41
¡
Î
• My DVD player switches on but there is
nothing displayed on my TV.
Make sure that the TV is set to the
correct video input (not a TV channel).
For example, if you connected this
player to the VIDEO 1 inputs on your TV,
switch your TV to VIDEO 1.
• If you connected this player to an AV
receiver, make sure that the receiver is
switched on and set to the correct input.
• You can also use the 0 OPEN/CLOSE
button to switch on the player and open
the disc tray at the same time.
• This player features a screen saver.
If the player is stopped or paused and
no button is pressed for five minutes,
the screen saver starts.
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Getting Started
1
Press ENTER to move on to the next
Let’s Get Started
screen.
When you switch on the player for the first
time, you should see a welcome screen
displayed on your TV. From here you can set
up the player to work with the kind of TV you
have, then either use the Setup Navigator to
make more settings, or jump right in and
start playing some discs.
Welcome to Pioneer DVD!
Thank you for purchasing this Pioneer DVD player.
Before using, please take a little time
to setup your DVD player
Put the batteries into the remote control
Next, press the ENTER button on the remote control
and start the Let's Get Started Menu
Before continuing, make sure that you’ve
Next
loaded the batteries in the remote control.
SETUP
TOP MENU
MENU
–
MULTI SPEED
+
2
Use the Joystick (left/right) to select
either ‘Wide screen (16:9)’ or ‘Standard
size screen (4:3)’ according to the kind of
TV you have, then press ENTER.
ENTER
VIDEO
RETURN ADJUST DIMMER JOG MODE
V.ADJ
FL
JOG
Let's Get Started Menu
7
3
8
/
E E/
What kind of TV do you have?
4
¢
1
¡
Use the
/
cursor buttons
PLAY MODE SURROUND
to choose, then press ENTER
Wide screen (16:9)
Standard size screen (4:3)
3
Press ENTER again to finish setting up.
Let's Get Started Menu
Setup complete
If you're finished setting up,
choose [Complete],
to start again choose [Back]
Complete
Back
• Select Back then press ENTER if you
want to go back and change the setting
you just made.
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
04
Using the on-screen displays
For ease of use, this player makes extensive
use of graphical on-screen displays (OSDs).
You should get used to the way these work as
you’ll need to use them when setting up the
player, using some of the playback features,
such as program play, and when making
more advanced settings for audio and video.
• Information at the bottom of every OSD
screen explains the currently selected
menu item and shows which buttons
can be used for that screen.
Setting up with the Setup
Navigator
All the screens are navigated in basically the
same way, using the cursor buttons to
change the highlighted item and pressing
ENTER to select it.
Using the Setup Navigator you can make a
number of other initial settings for this
player. We recommend using the Setup
Navigator, especially if you connected this
player to an AV receiver for playing surround
sound. To answer some of the questions
about digital audio formats you may need to
look at the instructions that came with your
AV receiver.
• Throughout this manual, ‘Select’ means
use the Joystick to highlight an item on-
screen, then press ENTER.
DISPLAY AUDIO SUBTITLE ANGLE
1
If a disc is playing, press 7 (stop).
SETUP
TOP MENU
MENU
Also turn on your TV and make sure that it is
–
MULTI SPEED
+
set to the correct video input.
2
Press SETUP.
ENTER
The on-screen display (OSD) appears.
VIDEO
RETURN ADJUST DIMMER JOG MODE
V.ADJ
FL
JOG
7
3
8
Audio Settings
Play Mode
Video Adjust
/
E
E/
4
¢
1
¡
PLAY MODE SURROUND
Disc Navigator
Setup Navigator
Initial Settings
Button
SETUP
What it does
Display/exit the on-screen
display
3
Select ‘Setup Navigator’.
Changes the highlighted
menu item
(Joystick)
ENTER
Audio Settings
Play Mode
Video Adjust
Selects the highlighted menu
item (both ENTER buttons
work in exactly the same way)
Disc Navigator
Setup Navigator
Initial Settings
(RETURN) Returns to the previous menu
without saving changes
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Getting Started
4
Select a DVD language.
7
Did you connect a digital output to
Some DVD discs feature on-screen menus,
soundtracks and subtitles in several lan-
guages. Set your preferred language here.
your AV receiver?
Select Connected or Not Connected.
Setup Navigator
Setup Navigator
Language Settings
AV Receiver
Connected
Language Settings
Audio Out Settings
Speaker Settings
AV Receiver Func.
DVD Language
English
Not Connected
Audio Out Settings 5.1ch Audio Out
French
Speaker Settings
AV Receiver Func.
Digital Audio Out
German
Italian
Spanish
Dutch
Other Language
• Note that the language you choose here
may not be available on all discs.
• If you selected Not Connected in both
steps 6 and 7, that completes the setup.
Press ENTER to leave the Setup
Navigator.
• If you want to select a language other
than those listed, select Other Lan-
guage. See Selecting languages using
the language code list on page 73 for
detailed information.
If you selected Connected in step 6, then
answer the following questions about the
speakers in your system, otherwise jump to
step 11.
5
Did you connect this player to an AV
receiver?
8
Do you have a center speaker con-
Setup Navigator
nected to your AV receiver?
Select Connected or Not Connected.
Language Settings
Audio Out Settings
Speaker Settings
AV Receiver Func.
AV Receiver
Connected
Not Connected
Setup Navigator
Language Settings
Audio Out Settings
Speaker Settings
AV Receiver Func.
Center Speaker
Connected
Not Connected
• If you selected Not Connected here,
that completes the setup. Press ENTER
to leave the Setup Navigator.
6
Did you connect the 5.1 channel
9
Do you have surround speakers
analog audio outputs to your AV re-
ceiver?
Select Connected or Not Connected.
connected to your AV receiver?
Select Connected or Not Connected.
Setup Navigator
Setup Navigator
Language Settings
Center Speaker
Connected
Language Settings
AV Receiver
Connected
Not Connected
Audio Out Settings Surround Speakers
Speaker Settings
Not Connected
Audio Out Settings 5.1ch Audio Out
Speaker Settings
AV Receiver Func.
AV Receiver Func.
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
04
10 Do you have a sub-woofer connected
to your AV receiver?
Select Connected or Not Connected.
13 Is your AV receiver compatible with
96kHz Linear PCM audio?
Select Compatible, Not Compatible or
Don’t Know.
Setup Navigator
Language Settings
Center Speaker
Connected
Setup Navigator
Not Connected
Audio Out Settings Surround Speakers
Speaker Settings
AV Receiver Func.
Sub-woofer
Language Settings
Dolby Digital
Compatible
Not Compatible
Don't Know
Audio Out Settings DTS
Speaker Settings
AV Receiver Func.
96kHz Linear PCM
• If you selected Not Connected in step
7, that completes the setup. Press
ENTER to leave the Setup Navigator.
14 Is your AV receiver MPEG compatible?
Select Compatible, Not Compatible or
Don’t Know.
Questions 11 through 14 are concerned with
the digital decoding capabilities of your AV
receiver.
Setup Navigator
11 Is your AV receiver Dolby Digital
compatible?
Select Compatible, Not Compatible or
Language Settings
Dolby Digital
Compatible
Not Compatible
Don't Know
Audio Out Settings DTS
Speaker Settings
AV Receiver Func.
96kHz Linear PCM
MPEG
Don’t Know.
Setup Navigator
Language Settings
Audio Out Settings
Speaker Settings
AV Receiver Func.
Dolby Digital
Compatible
Not Compatible
Don't Know
15 Press ENTER to complete the setup, or
press SETUP to quit the Setup Navigator
without making any changes.
Setup Navigator
12 Is your AV receiver DTS compatible?
Select Compatible, Not Compatible or
Don’t Know.
Language Settings
Dolby Digital
Compatible
le
Audio Out Settings DTS
Settings complete
Speaker Settings
AV Receiver Func.
96kHz Lin
Press ENTER to exit
MPEG
ENTER
Setup Navigator
Language Settings
Dolby Digital
Compatible
Not Compatible
Don't Know
Audio Out Settings DTS
Speaker Settings
Congratulations, setup is complete!
AV Receiver Func.
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Getting Started
Playing discs
1
If the player isn’t already on, press
STANDBY/ON to switch it on.
The basic playback controls for playing DVD,
CD, SACD, Video CD and MP3 discs are
covered here. Further functions are detailed
in the next chapter.
If you’re playing a DVD or Video CD, also turn
on your TV and make sure that it is set to the
correct video input.
2
Press 0 OPEN/CLOSE to open the disc
tray.
Throughout this manual, the term ‘DVD’
means DVD-Video, DVD-Audio and
DVD-R/RW. If a function is specific to a
particular kind of DVD disc, it is
specified.
3
Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc.
Never load more than one disc at a time.
OPEN /
CLOSE
DISPLAY AUDIO SUBTITLE ANGLE
SETUP
TOP MENU
MENU
–
MULTI SPEED
+
ENTER
VIDEO
ADJUST DIMMER JOG MODE
V.ADJ
FL
JOG
7
3
8
/
E E/
4
¢
1
¡
4
Press 3 (play) to start playback.
PLAY MODE SURROUND
If you’re playing a DVD or Video CD, a menu
may appear. See pages 29-30 for how to
navigate these.
CLEAR
1
4
7
2
5
8
3
6
9
C
ENTER
E
0
If you’re playing an MP3 disc, it may take a
few seconds before playback starts, depend-
ing on the complexity of the file structure on
the disc.
TV CONTROL
+
FUNC
+
VOLUME CHANNEL
TV
–
–
Basic playback controls
The table below shows the basic controls on
the remote for playing discs. The following
chapter covers more playback features in
more detail.
28
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
04
Button
What it does
Front panel controls
The 3 (play), 7 (stop), and 8 (pause) buttons
on the front panel work in exactly the same
way as their remote control equivalents. The
combined scan/skip buttons on the front
panel (4 1 and ¡ ¢) work slightly
differently from the remote buttons.
3
Starts playback.
DVD and Video CD: if the
display shows RESUME,
playback starts from the
resume point.
8
7
Pauses a disc that’s playing,
or restarts a paused disc.
OPEN/CLOSE
0
3
PLAY
41 ¡¢
7
8
Stops playback.
3
Î
DVD and Video CD: Display
shows RESUME. Press 7
(stop) again to cancel the
resume function (The resume
function is also cancelled
when you eject the disc tray.).
4 1
¡ ¢
Press and hold for fast scan; press for track/
chapter skip.
1
¡
4
Press to start fast reverse
scanning. Press 3 (play) to
resume normal playback.
• You may find with some DVD discs that
some playback controls don’t work in
certain parts of the disc. This is not a
malfunction.
Press to start fast forward
scanning. Press 3 (play) to
resume normal playback.
Skips to the start of the
current track or chapter, then
to previous tracks/chapters.
DVD disc menus
Many DVD-Video and DVD-Audio discs
contain menus from which you can select
what you want to watch or listen to. They
may give access to additional features, such
as subtitle and audio language selection, or
special features such as slideshows. See the
disc packaging for details.
¢
Skips to the next track or
chapter.
Numbers
Use to enter a title/group/track
number. Press ENTER to select
(or wait a few seconds).
• If the disc is stopped, play-
back starts from the selected
title/group (for DVD) or track
number (for CD/SACD/Video
CD/MP3).
Sometimes menus are displayed automati-
cally when you start playback; others only
appear when you press MENU or TOP
MENU.
• If the disc is playing,
playback jumps to the start of
the selected chapter or track
(within the current group for
DVD-Audio).
29
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Getting Started
Video CD PBC menus
Some Video CDs have menus from which
you can choose what you want to watch.
These are called PBC (Playback control)
menus.
• Some DVD-Audio discs feature a ‘bonus
group’. To access this group you have to
input a password, which you can find on
the disc’s packaging. See page 62 for
more information.
You can play a PBC Video CD without having
to navigate the PBC menu by starting
playback using a number button or track
skip button (¢) to select a track, rather
than the 3 (play) button.
SETUP
TOP MENU
MENU
–
MULTI SPEED
+
ENTER
SETUP
TOP MENU
MENU
–
MULTI SPEED
+
VIDEO
RETURN ADJUST DIMMER JOG MODE
V.ADJ
FL
JOG
7
3
8
ENTER
/
E E/
4
¢
1
¡
PLAY MODE SURROUND
CLEAR
VIDEO
RETURN ADJUST DIMMER JOG MODE
1
4
7
2
5
8
3
6
9
C
ENTER
E
V.ADJ
FL
JOG
7
3
8
0
/
E E/
4
¢
1
¡
TV CONTROL
PLAY MODE SURROUND
CLEAR
Button
What it does
1
4
7
2
5
8
3
6
9
C
ENTER
E
TOP MENU
Displays the ‘top menu’ of a
disc—this varies with the disc.
0
TV CONTROL
MENU
Displays a disc menu—this
varies with the disc and may
be the same as the ‘top menu’.
Button
What it does
Moves the cursor around the
screen.
(RETURN) Displays the PBC menu.
(Joystick)
ENTER
Numbers
Use to enter a numbered
menu option. Press ENTER to
select (or wait a few seconds).
Selects the current menu
option.
(RETURN) Returns to the previously
displayed menu screen. On
some DVD-Audio discs
featuring browsable pictures,
press to display the browser
screen.
4
¢
Displays the previous menu
page (if there is one).
Displays the next menu page
(if there is one).
Numbers
Highlights a numbered menu
option (some discs only).
Press ENTER to select (or wait
a few seconds).
30
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
04
• I have a widescreen TV so why are there
black bars at the top and bottom of the
screen when I play some discs?
• After I load a DVD disc, it ejects automati-
cally after a few seconds!
Some movie formats are such that even
when played on a widescreen TV, black
bars are necessary at the top and
bottom of the screen. This is not a
malfunction.
Most likely, the disc is the wrong region
for your player. The region number
should be printed on the disc; check it
against the region number of the player
(which you can find on the rear panel).
See also page 11.
• I have a standard (4:3) TV and set the
player to show widescreen DVDs in pan &
scan format, so why do I still get black
bars top and bottom with some discs?
If the region number is OK, it may be
that the disc is damaged or dirty. Clean
the disc and look for signs of damage.
See also page 68. Check also that the
disc is aligned properly in the disc tray
and that it’s loaded label-side up.
Some discs override the display
preferences of the player, so even if you
have 4:3 (Pan & Scan) selected, those
discs will still be shown in letterbox
format. This is not a malfunction.
• Why won’t the disc I loaded play?
• My AV receiver is definitely compatible
with 96/88.2kHz Linear PCM audio, but it
doesn’t seem to work with this player.
What’s wrong?
First check that you loaded the disc the
right way up (label side up), and that it’s
clean and not damaged. See page 68
for information on cleaning discs.
For digital copy-protection purposes,
some 96/88.2kHz DVD discs only
output digital audio downsampled to
48/44.1kHz. This is not a malfunction.
To fully take advantage of the high
sampling rate audio, connect the analog
audio outputs to your amplifier/receiver.
If a disc loaded correctly won’t play, it’s
probably an incompatible format or disc
type, such as DVD-ROM. See page 10
for more on disc compatibility.
• There’s no picture!
Check the front panel and make sure
that the VIDEO OFF indicator isn’t lit. If
it is, press the VIDEO OFF button to
switch the video output back on. See
also page 18.
• Why can’t I hear SACD audio through the
digital outputs?
SACD audio is only available through
the analog outputs. This is not a
malfunction. Some DVD-Audio discs too
only output audio through the analog
outputs.
Also make sure that if your TV isn’t
compatible with progressive scan video,
that the PROGRESSIVE indicator isn’t lit.
If it is, press the PROGRESSIVE button
to switch the video output back to
interlace. See also page 18.
31
En
Download from Www.Somanuals.com. All Manuals Search And Download.
04
Getting Started
• Is it better to listen to DVD-Audio discs
through the analog outputs?
Some DVD-Audio discs do not output
anything through the digital outputs,
and multichannel discs are downmixed
to stereo for the digital output. In
addition, high sampling rate DVD-Audio
discs (higher than 96kHz) automatically
downsample audio output from the
digital outputs.
Using the multichannel analog audio
outputs for DVD-Audio have none of
these limitations.
• My DVD-Audio disc starts playing, but
then suddenly stops!
The disc may have been illegally copied.
• My CD with MP3 tracks won’t play!
Also make sure that the tracks are
encoded in MPEG1 audio layer 3 format.
See also page 10.
• Some MP3 tracks don’t show up. Where
are they?
Filenames that don’t end with the
extension “.mp3” won’t be recognized by
this player. Also, if there are more than
250 folders or tracks on the disc, only
the first 250 are recognized. See also
page 11.
32
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
Introduction
05
1
Press SETUP and select ‘Disc Naviga-
tor’ from the on-screen display.
Alternatively, if a DVD-RW, CD, Video CD or
MP3 disc is loaded, you can press MENU,
which takes you straight to the Disc Naviga-
tor screen.
Most of the features described in this
chapter make use of on-screen displays. For
an explanation of how to navigate these, see
Using the on-screen displays on page 25.
Many of the functions covered in this chapter
apply to DVD and SACD discs, Video CDs,
CDs and MP3 discs, although the exact
operation of some varies slightly with the
kind of disc loaded.
Audio Settings
Video Adjust
Play Mode
Disc Navigator
Initial Settings
Some DVD discs restrict the use of some
functions (random or repeat, for example).
This is not a malfunction.
Setup Navigator
When playing Video CDs, some of the
functions are not available during PBC
playback. If you want to use them, start the
disc playing using a number button to select
a track.
2
Select what you want to play.
Depending on the type of disc you have
loaded, the Disc Navigator looks slightly
different.
For DVD-Video discs select a title, or a
chapter within a title.
Using the Disc Navigator to
browse the contents of a disc
Disc Navigator
Title(1-03)
Chapter(1-036)
Chapter 001
Chapter 002
Chapter 003
Chapter 004
Chapter 005
Chapter 006
Chapter 007
Chapter 008
Use the Disc Navigator to browse through
the contents of a disc to find the part you
want to play. You can use the Disc Navigator
when a disc is playing or stopped.
DVD
Title 01
Title 02
Title 03
For DVD-Audio discs select a group, or a
track within a group.
• It’s not possible to use the Disc Naviga-
tor when playing a Video CD in PBC
mode, or when a DVD disc menu is
displayed.
Disc Navigator
Group(1-03)
Track(1-14)
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Track 08
Group 01
Group 02
Group 03
DVD-Audio
33
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing Discs
For SACD discs select a track within the
current playback area.
For MP3 discs select a folder, or a track
within a folder. (Note that if a folder or track
name contains accented or non-roman
characters, they may show up with generic
names – F_033, T_035, etc.).
Disc Navigator
Track(1-009)
Track 001
Track 002
Track 003
Track 004
Track 005
Track 006
Track 007
Track 008
Total Time 40.31
2ch Area
Disc Navigator
Folder(1-017)
001. ACP
002. Nth Degree
003. Pfeuti
Track(1-010)
MP3
001. Gravity deluxe
002.Tesla's patent
003. Border dispute
004. Delayed by rain
005. Accident incident
006. Pigeon post
007. Outernational
008. Vacuum tube
004. Live
005. Glitch music
006. CodHead
007.Thermo
008. Missing Man
For a VR mode DVD-RW disc select between
the Playlist and Original areas of the disc, or
a title. Move the joystick right to preview the
title.
Playback starts after you press ENTER.
• It’s not possible to switch between
Original and Playlist during playback.
• The Disc Navigator is not available
unless there is a disc loaded.
• Not all DVD-RW discs have a Playlist.
• Another way to find a particular place on
a disc is to use one of the search
modes. See Searching a disc on page
43.
Disc Navigator
Title(1-03)
DVD-RW
Original
01. 3/31 FIRST LEAGUE
02. 4/28 SECOND LEAGUE
03. 4/29 FINAL ROUND
Play List
For CDs and Video CDs select a track.
Disc Navigator
Track(1-13)
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Track 08
Total Time 58.27
CD
34
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
05
Using the Multi Dial
You can use the Multi Dial to control fast and
slow motion scanning and frame advance of
DVD-Video, DVD-R/RW and Video CDs.
Scanning discs
You can fast-scan discs forward or backward
at various different speeds using the remote.
1
During playback, press 1 or ¡ to
When scanning, no audio is output, even
when the scanning speed is 1/1 (normal
playback speed).
start scanning.
2
Press repeatedly to increase the
scanning speed.
• MP3s can only be scanned at one speed.
• The scanning speed is shown on-screen.
To start scanning playback at 1/16 speed,
turn the MULTI DIAL (clockwise for
forward; anticlockwise for reverse)
during playback.
• Turn the MULTI DIAL in the same
direction to increase the scan speed—
the speed is indicated at the top left of
the screen.
3
To resume normal playback, press 3
(play).
• Sound can be heard while scanning
SACDs, audio CDs, and MP3 discs.
• Turn in the opposite direction to slow the
scan speed/reverse direction.
• There is no sound while scanning DVD-
Videos and Video CDs, and no subtitles
while scanning DVD-Video.
To start high-speed scanning, turn the
MULTI DIAL quickly (clockwise for
forward; anticlockwise for reverse)
during playback.
• Change the speed/direction in the same
way as above.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached on a DVD-Video disc.
• To resume normal playback, press 3.
To start manual scanning, press JOG (JOG
MODE), then use the MULTI DIAL to
advance frames in either direction.
To switch off jog mode, press JOG (JOG
MODE) again. The picture remains
paused until you restart playback.
• To resume normal playback, press 3.
• You can scan Video CDs in the same
way as DVD-Video discs (see above).
However, reverse slow-motion scanning
is not possible, and there are just two
fast scanning speeds.
35
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing Discs
Playing in slow motion
Frame advance/frame reverse
You can play DVD-Videos, DVD-R/RW and
Video CDs at four different forward slow
motion speeds, and DVD-Videos, DVD-R/RW
also at two reverse speeds.
You can advance or back up DVD-Video or
DVD-RW discs frame-by-frame. With Video
CDs, you can only use frame advance.
1
During playback, press 8 (pause).
/e E/
to reverse or
1
During playback, press 8 (pause).
/e E/
until
2
Press
or
2
Press and hold
or
advance a frame at a time.
slow motion playback starts.
• The slow motion speed is shown on-
3
To resume normal playback, press 3
(play).
screen.
• There is no sound during slow motion
playback.
• The picture quality when using frame
reverse is not as good as frame ad-
vance.
3
Press repeatedly to change the slow
motion speed.
• The slow motion speed is displayed on-
screen.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
4
To resume normal playback, press 3
• When changing direction of a DVD-
Video disc, the picture may ‘move’ in an
unexpected way. This is not a malfunc-
tion.
(play).
• You can’t use slow motion playback with
some titles on some DVDs.
• For DVD-Audio discs featuring
browsable pictures (page 73), press
• Video CD only supports forward slow
motion playback.
/e E/
/
to view the previous/next
picture.
• The picture quality during slow motion
playback is not as good as during
normal playback.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
• For DVD-Audio discs featuring
browsable pictures (page 73), press
/e E/
/
to view the previous/next
picture.
36
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
05
3
Press ENTER on ‘B(End Point)’ to set
Looping a section of a disc
the loop end point.
The A-B Repeat function allows you to
specify two points (A and B) within a track
(DVD-Audio, CD and Video CD) or title (DVD-
Video and DVD-RW) that form a loop which
is played over and over.
Play Mode
A-B Repeat
Repeat
A(Start Point)
B(End Point)
Off
Random
Program
Search Mode
• A-B Repeat is not available with SACDs,
MP3s, Video CD in PBC mode, or while
a DVD disc menu is being displayed.
After pressing ENTER, playback jumps back
to the start point and plays the loop.
1
During playback, press PLAY MODE
4
To resume normal playback, press
and select ‘A-B Repeat’ from the list of
functions on the left.
CLEAR or select ‘Off’ from the menu.
Play Mode
A-B Repeat
Repeat
A(Start Point)
B(End Point)
Off
Random
Program
Search Mode
2
Press ENTER on ‘A(Start Point)’ to set
the loop start point.
Play Mode
A-B Repeat
Repeat
A(Start Point)
B(End Point)
Off
Random
Program
Search Mode
37
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing Discs
DVD-Video and DVD-RW discs
• Title Repeat
• Chapter Repeat
• Repeat Off
Using repeat play
There are various repeat play options,
depending on the kind of disc loaded. It’s
also possible to use repeat play together with
program play to repeat the tracks/chapters in
the program list (see Creating a program list
on page 40).
DVD-Audio discs
• Group Repeat
• Track Repeat
• Repeat Off
SACD, CD and Video CD discs
• Disc Repeat
• Track Repeat
• Repeat play is not available with Video
CDs in PBC mode, or while a DVD disc
menu is being displayed.
• Repeat Off
MP3 discs
1
During playback, press PLAY MODE
• Disc Repeat
• Folder Repeat
• Track Repeat
• Repeat Off
and select ‘Repeat’ from the list of
functions on the left.
Play Mode
A-B Repeat
Repeat
Title Repeat
Chapter Repeat
Repeat Off
Random
• If you’ve made a program list, the
Program Repeat option also appears as
a repeat option.
Program
Search Mode
• To stop the disc and cancel repeat play,
press 7 (stop).
2
Select a repeat play option.
• You can also cancel repeat play without
stopping playback by pressing CLEAR.
The disc will play to the end, then stop.
The repeat play options available depend on
the type of disc loaded. The screen below
appears when a DVD-Video disc is loaded.
Play Mode
• You can’t use repeat and random play at
the same time.
A-B Repeat
Repeat
Title Repeat
Chapter Repeat
Repeat Off
Random
Program
• If you switch camera angle during
repeat play, repeat play is canceled.
Search Mode
38
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
05
DVD-Video discs
• Random Title
• Random Chapter
• Random Off
Using random play
Use the random play function to play titles or
chapters (DVD-Video ), groups or tracks
(DVD-Audio), or tracks (CD, Video CD and
MP3 discs) in a random order.
DVD-Audio discs
• Random Group
• Random Track
• Random Off
You can set the random play option when a
disc is playing or stopped.
MP3, CD and Video CD discs
• On
• Off
• You can’t use random play with SACDs,
DVD-RWs, Video CDs playing in PBC
mode, or while a DVD disc menu is
being displayed.
• To stop the disc and cancel random
playback, press 7 (stop).
1
Press PLAY MODE and select ‘Random’
from the list of functions on the left.
• You can also cancel random playback
without stopping the disc by pressing
CLEAR. The disc will play to the end,
then stop.
Play Mode
A-B Repeat
Repeat
Random Title
Random Chapter
Random Off
Random
• During random play, the 4 and ¢
buttons function a little differently to
normal: 4 returns to the beginning of
the current track/chapter. You can't go
back further than this. ¢ selects
another track/chapter at random from
those remaining.
Program
Search Mode
2
Select a random play option.
The random play options available depend on
the type of disc loaded. The screen below
appears when a DVD-Video disc is loaded.
• You can't use random play together with
program or repeat play.
Play Mode
A-B Repeat
Repeat
Random Title
Random Chapter
Random Off
Random
Program
Search Mode
39
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing Discs
3
Select a title, chapter, group, folder or
Creating a program list
track for the current step in the program
list.
For a DVD-Video disc, you can add a whole
title, or a chapter within a title to the
program list.
This feature lets you program the play order
of titles/group/chapters/folders/tracks on a
disc.
• To add a title, select the title.
• Program play is not available with DVD-
RWs, Video CDs playing in PBC mode,
or while a DVD disc menu is being
displayed.
Program
Program Step
01. 01
02.
Title(1-03)
Title 01
Title 02
Title 03
Chapter(1-036)
Chapter 001
Chapter 002
Chapter 003
Chapter 004
Chapter 005
Chapter 006
Chapter 007
Chapter 008
03.
04.
1
Press PLAY MODE and select ‘Pro-
gram’ from the list of functions on the
left.
05.
06.
07.
08.
Play Mode
• To add a chapter, first highlight the title,
then move the cursor right and select a
chapter from the list.
A-B Repeat
Repeat
Create/Edit
Playback Start
Playback Stop
Program Delete
Program Memory
Random
Program
Search Mode
‰ Off
Program
Title(1-03)
Title 01
Title 02
Title 03
Chapter(1-036)
Chapter 001
Chapter 002
Chapter 003
Chapter 004
Chapter 005
Chapter 006
Chapter 007
Chapter 008
Program Step
01. 01-003
02.
03.
2
Select ‘Create/Edit’ from the list of
04.
05.
program options.
06.
07.
08.
Play Mode
A-B Repeat
Repeat
Create/Edit
Playback Start
Playback Stop
Program Delete
Program Memory
For a DVD-Audio disc, you can add a whole
group, or a track within a group to the
program list.
Random
Program
Search Mode
‰ Off
• To add a group, select the group.
The Program edit screen that appears
depends on the kind of disc loaded.
Program
Track(1-14)
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Track 08
Program Step
01. 01
02.
Group(1-03)
Group 01
Group 02
Group 03
On the left side is the program list, then to
the right is a list of titles (if a DVD-Video disc
is loaded), groups (for DVD-Audio), tracks
(for SACDs, CDs and Video CDs), or folder
names (for MP3 discs). On the far right is a
list of chapters (for DVD-Video) or tracks (for
DVD-Audio and MP3).
03.
04.
05.
06.
07.
08.
40
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
05
• To add a track, first highlight the group,
then move the cursor right and select a
track from the list.
• To add a track, first find the folder, then
move the cursor right and select a track
name from the list.
Program
Program
Program Step
Program Step
Folder(1-006)
Track(1-010)
Group(1-03)
Group 01
Group 02
Group 03
Track(1-14)
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Track 08
01. 001-003
001. Gravity deluxe
002.Tesla's patent
003. Border dispute
004. Delayed by rain
005. Accident incident
006. Pigeon post
007. Outernational
008. Vacuum tube
01. 01-03
02.
001. ACP
002. Nth Degree
003. Pfeuti
004. Live
006. CodHead
02.
03.
04.
05.
06.
07.
08.
03.
04.
05.
06.
07.
08.
For SACD, CD or Video CD, select a track to
add to the program list.
After pressing ENTER to select the title/
group/chapter/folder/track, the step number
automatically moves down one.
(The screen below shows a CD loaded.)
4
list.
Repeat step 3 to build up a program
Program
Program Step
Track(1-12)
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Track 08
Total Time 0.00
A program list can contain up to 24 titles/
chapters/groups/folders/tracks.
01. 04
02.
03.
04.
05.
5
To play the program list, press 3
06.
(play).
07.
08.
Program play remains active until you turn
off program play (see below), erase the
program list (see below), eject the disc or
switch off the player.
For an MP3 disc, you can add a whole folder,
or a track within a folder to the program list.
• To add a folder, select the folder.
Program
• To exit the program edit screen without
starting playback, press PLAY MODE or
SETUP. (Don’t press RETURN—your
program list will be lost.)
Program Step
Folder(1-006)
Track(1-010)
01. 001
02.
001. ACP
002. Nth Degree
003. Pfeuti
004. Live
005. Glitch music
006. CodHead
001. Gravity deluxe
002.Tesla's patent
003. Border dispute
004. Delayed by rain
005. Accident incident
006. Pigeon post
007. Outernational
008. Vacuum tube
03.
04.
05.
• During program play, press ¢ to skip
to the next program step.
06.
07.
08.
• Press CLEAR during playback (though
not if the program list OSD is displayed)
to switch off program play. Press while
stopped to erase the program list.
41
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing Discs
Editing a program list
Other functions available from
the program menu
As well as creating and editing a program
list, you can start and stop program play,
erase the program list, and memorize a DVD
program list from the Program menu.
After creating a program list, you can add,
delete and change steps.
1
Press PLAY MODE and select ‘Pro-
gram’ from the list of functions on the
left.
1
Press PLAY MODE and select ‘Pro-
2
Select ‘Create/Edit’ from the list of
gram’ from the list of functions on the
left.
program options.
3
To clear a step, highlight the step
Play Mode
number and press CLEAR.
A-B Repeat
Repeat
Create/Edit
4
To insert a step in the middle of the
Playback Start
Playback Stop
Program Delete
Program Memory
program list, highlight the step where
you want the new step to appear, then
select a title/group/chapter/folder/track
to add.
Random
Program
Search Mode
‰ Off
After pressing ENTER, the new step is
inserted into the list.
2
Select a program play function.
• Create/Edit – See Creating a program
list on page 37.
5
To add a step to the end of the
program list, highlight the next free step
then select a title/group/chapter/folder/
track to add.
• Playback Start – Starts playback of the
program list
• Playback Stop – Turns off program play,
but does not erase the program list
• Program Delete – Erases the program
list and turns off program play
• To exit the program edit screen without
starting playback, press PLAY MODE or
SETUP.
• Program Memory (DVD-Video only) –
Select On to save the program list for
the disc loaded. (Select Off to cancel
the program memory for the disc
loaded)
• If you want to exit the program edit
screen without saving the changes you
made, press RETURN.
• After saving a program list using the
Program Memory feature, whenever
you load that disc, the program list is
automatically recalled and program play
switched on.
• You can save program lists for up to 24
discs. After that, the oldest one is
replaced with the new one saved.
42
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
05
4
Press ENTER to start playback.
Searching a disc
Using the search mode function from the
Play Mode menu you can quickly jump to a
particular part of the disc that you’re
watching or listening to.
• You can only use time search with DVD-
Video and Video CD discs.
• The disc must be playing in order to use
time search.
1
Press PLAY MODE and select ‘Search
Mode’ from the list of functions on the
left.
The search options that appear depend on
the kind of disc loaded. The screen below
shows the DVD-Video search options.
• Search functions are not available with
Video CDs in PBC mode (start non-PBC
playback by stopping playback, then
pressing ¢, then 3 (play)).
• You can often select what you want to
watch from a DVD disc menu. See also
pages 29–30.
Play Mode
A-B Repeat
Repeat
Title Search
Chapter Search
Time Search
Random
Program
Search Mode
2
3
Select a search mode.
Use the number buttons to enter a
title, group, chapter, page, folder or track
number, or a time.
Play Mode
A-B Repeat
Repeat
Title Search
Input Chapter
Chapter Search
Time Search
Random
Program
Search Mode
• For a time search, enter the number of
minutes and seconds into the currently
playing title (DVD-Video/DVD-RW) or
track (Video CD) you want playback to
resume from. For example, press 4, 5, 0,
0 to have playback start from 45 minutes
into the disc. For 1 hour, 20 minutes and
30 seconds, press 8, 0, 3, 0.
• Some DVD-Audio discs feature pages of
browsable pictures. Enter the page
number you want.
43
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing Discs
Switching subtitles
Switching DVD-Video audio
language
Some DVD-Video discs have subtitles in one
or more languages; the disc box will usually
tell you which subtitle languages are
available. You can switch subtitle language
during playback.
When playing a DVD-Video disc recorded
with dialog in two or more languages, you
can switch audio language during playback.
1
Press AUDIO repeatedly to select an
1
Press SUBTITLE repeatedly to select a
audio language option.
subtitle option.
Audio
2
French
Dolby Digital 3/2.1CH
Subtitle
1
English
• With some discs, while the above
display is showing, you can also use the
joystick (up/down) and ENTER to select
an audio language from a drop-down
menu.
• While the above display is showing, you
can also use the joystick (up/down) and
ENTER to select a subtitle language
from a drop-down menu.
Audio
2
French
Dolby Digital 3/2.1CH
Subtitle
1
English
Off
1. English
2. French
3. German
4. Italian
Dolby Digital 3/2.1CH
Dolby Digital 3/2.1CH
Dolby Digital 2CH
Dolby Digital 2CH
1. English
2. French
3. German
4. Italian
1/
1
1/
1
• Some discs only allow you to change
subtitle language from the disc menu.
Press TOP MENU to access.
• Some discs only allow you to change
audio language from the disc menu.
Press TOP MENU to access.
• To set subtitle preferences, see Subtitle
Language on page 57.
• To set audio language preferences, see
Audio Language on page 56.
44
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
05
Switching DVD-RW audio
channel
Switching CD/MP3/Video CD
audio channel
When playing a DVD-RW disc recorded with
dual-mono audio, you can switch between
the main, sub, and mixed channels during
playback.
You can switch between stereo, just the left
channel or just the right channel of a CD/
MP3/Video CD. (To change the audio channel
of a CD it must be playing.)
1
Press AUDIO repeatedly to select an
1
Press AUDIO repeatedly to select an
audio channel option.
audio channel option.
Audio
Stereo
Audio
1L
Dolby Digital 1+1CH
Switching camera angles
Switching DVD-Audio audio
channel
Some DVD-Video discs feature scenes shot
from two or more angles—check the disc
box for details.
Depending on the disc, you may be able to
switch channels when playing DVD-Audio
discs—see the disc box for details.
When a multi-angle scene is playing, a
icon appears on screen to let you know that
other angles are available (this can be
switched off if you prefer—see page 59).
1
Press AUDIO repeatedly to select an
audio channel option.
Digital Out Converted
¶
During playback press ANGLE to
Audio
Linear PCM 192kHz24bit
2CH
1
switch angle.
When you change the audio channel,
playback restarts from the beginning of the
current track.
• Some discs only allow you to change
audio channel from the disc menu.
Press TOP MENU to access.
• To set audio language preferences, see
Audio Language on page 56.
45
En
Download from Www.Somanuals.com. All Manuals Search And Download.
05
Playing Discs
• SACD displays
Displaying disc information
Play
SACD
3
Various track, chapter and title information,
as well as the video transmission rate for
DVD discs, can be displayed on-screen.
Current / Total
Elapsed
0.22
Remain
3.38
Total
4.00
Track
1/9
(During multichannel playback only)
Play
SACD
Elapsed
0.22
3
Current / Total
Remain
3.38
Total
4.00
1
During playback, press DISPLAY to
Track
1/9
3/2.1CH
show/switch the information displayed.
Keep pressing DISPLAY to change the
displayed information.
Audio
Play
Disc
SACD
3
Elapsed
0.24
Remain
40.07
Total
40.31
• DVD-Video displays
Play
DVD
3
Current / Total
Elapsed
2.23
Remain
138.36
Total
138.59
Title
1/3
• CD and Video CD displays
1 English
Subtitle
1
1
English
Audio
Angle
Dolby Digital
3/2.1CH
Play
VCD
3
Elapsed
0.23
Remain
58.51
Total
57.14
Disc
Play
DVD
3
Current / Total Elapsed
Total
1.46
6.0Mbps
Remain
1.40
Chapter
2/36
0.06
Play
VCD
3
#
Tr. Rate
:
Current / Total
2/16
Elapsed
0.23
Remain
4.20
Total
4.43
Track
The # mark displayed with some
DVD-Video discs means that the
video is playing at 24 frames/second,
progressive.
(During PBC playback only)
Play
VCD
3
Pause
Current / Total Elapsed
Chapter 2/36 0.06 15
Tr. Rate
DVD
8
• MP3 disc displays
Total
1.46
6.0Mbps
Remain
1.40
Play
MP3
:
3
Current / Total
Elapsed
0.18
Remain
12.42
Total
13.00
Track
1/17
When the disc is paused, the display
also shows the frame number.
Track Name
Outernational
Play
MP3
3
Current / Total
Folder
2/7
Folder Name ACP
• DVD-Audio displays
Play
DVD-Audio
3
Current / Total
1/14
Elapsed
3.20
Remain
2.41
Total
6.01
Track
- -
1
1
Linear PCM
Audio 192kHz 24bit 2/0CH
Subtitle
Angle
• You can see disc information (number of
titles/chapters, groups, tracks, folders
and so on) from the Disc Navigator
screen. See Using the Disc Navigator to
browse the contents of a disc on page
33.
-Audio
DVD
Play
3
Current / Total
Elapsed
3.21
Remain
53.20
Total
56.41
Group
1/3
Tr. Rate
:
9.5Mbps
• DVD-RW displays
Play
DVD-RW
Original
3
Current / Total
Elapsed
0.08
Remain
30.22
Total
30.30
Title
1/32
1
- -
Audio Dolby Digital
2/0CH
Subtitle
Play
DVD-RW
Original
3
Current / Total
Chapter
Tr. Rate
1/1
4.3Mbps
46
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Audio Settings Menu
06
Audio DRC
• Default setting: Off
• Audio DRC is only effective with Dolby
Digital audio sources.
When watching Dolby Digital DVDs at low
volume, it’s easy to lose the quieter sounds
completely—including some of the dialog.
Switching Audio DRC (Dynamic Range
Control) to On can help by bringing up the
quieter sounds, while controlling loud peaks.
• Audio DRC is only effective through the
digital output when Digital Out is set to
On, and Dolby Digital Out is set to
Dolby Digital > PCM. See page 53.
• The effect of Audio DRC depends on
your speakers and AV receiver settings.
How much of a difference you hear depends
on the material you’re listening to. If the
material doesn’t have wide variations in
volume, you may not notice much change.
1
Press SETUP and select ‘Audio Set-
tings’ from the on-screen display.
Audio Settings
Play Mode
Video Adjust
Disc Navigator
Setup Navigator
Initial Settings
2
Highlight Audio DRC, then use the
Joystick (left/right) to change to ‘On’ or
‘Off’, as required.
Audio Settings
Audio DRC
1/
2
Off
Off
Fix
Virtual Surround
Channel Level
3
Press ENTER to make the setting and
exit the Audio Settings screen.
47
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
The Audio Settings Menu
2
Highlight TruSurround, then use the
Virtual Surround
Joystick (left/right) to change to ‘2V/
TruSurround’ or ‘Off’, as required.
• Default setting: Off
Switch on Virtual surround to enjoy surround
sound effects from just two speakers.
Audio Settings
Audio DRC
1/
2
When you play a Dolby Digital soundtrack,
Virtual Dolby Digital, which uses
TruSurround technology from SRS, produces
a deep, realistic 3D sound space from a pair
of stereo speakers.
Off
Off
Virtual Surround
Channel Level
Fix
3
Press ENTER to make the setting and
exit the Audio Settings screen.
• You can also use the SURROUND
button on the remote control to switch
Virtual Surround on (2V/
TruSurround)/Off.
• Virtual Surround does not work with CD,
MP3, DVD-Audio or SACD discs, or
96kHz Linear PCM soundtracks.
1
Press SETUP and select ‘Audio Set-
• The Virtual Surround effect is output
only through the analog AUDIO OUT
(2ch) jacks.
tings’ from the on-screen display.
• Make sure that Audio Output Mode is
set to 2 Channel (page 64).
Audio Settings
Play Mode
Video Adjust
• How good the surround effect is varies
with the disc.
Disc Navigator
Setup Navigator
Initial Settings
48
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Audio Settings Menu
06
4
Variable setting only: Set the channel
Channel Level
levels for each speaker.
• Default setting: Fix / all speakers 10 ft.
Audio Settings
2/
3
This setting allows you to set the level of
each channel sent to the 5.1 channel analog
outputs, and to set the distance of the
speakers from your listening position so that
the player can optimize the surround sound.
Channel Level L
Channel Level C
Channel Level R
Channel Level RS
Channel Level LS
Channel Level SW
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
0.0 dB
1
Press SETUP and select ‘Audio Set-
tings’ from the on-screen display.
• Use the Joystick (up/down) to select a
speaker.
• Use the Joystick (left/right) to adjust the
channel level for that speaker.
Audio Settings
Play Mode
Video Adjust
Channel levels can be set from –6 dB to
+6 dB in 0.5 dB increments.
Disc Navigator
Setup Navigator
After setting up all the channel levels, move
the Joystick down until you reach the
speaker distance setting screen.
Initial Settings
2
Highlight Channel Level, then use the
Joystick (left/right) to change to ‘Fix’ or
‘Variable’, as required.
Audio Settings
Audio DRC
1/
2
Off
Off
Virtual Surround
Channel Level
Fix
• Fix – Channel levels are fixed, but you
can set the speaker distances
• Variable – You can specify variable
channel levels as well as speaker
distances
3
If you chose Variable, move the
joystick down to proceed to the next
screen.
Audio Settings
Audio DRC
1/
3
Off
Off
Virtual Surround
Channel Level
Variable
49
En
Download from Www.Somanuals.com. All Manuals Search And Download.
06
The Audio Settings Menu
5
Fix and Variable settings: Set the
distance for each speaker.
Audio Settings
3/3
Speaker Distance L
Speaker Distance C
Speaker Distance R
Speaker Distance LS
Speaker Distance RS
Speaker Distance SW
10.0 ft.
10.0 ft.
10.0 ft.
10.0 ft.
10.0 ft.
10.0 ft.
• Use the joystick (up/down) to select a
speaker.
• Use the joystick (left/right) to adjust the
distance from your listening position to
that speaker.
Front left/right (L/R) speakers can be set
from 1.0 ft. to 30 ft. in 0.5 ft. increments.
Center speaker (C) and subwoofer (SW) can
be set from – 6.5 ft. to +6.5 ft. relative to the
front left/right speakers
Surround left/right (LS/RS) speakers can be
set from –20 ft. to +6.5 ft. relative to the front
left/right speakers.
When you adjust the front left (L) or front
right (R) speaker, all the other speaker
distances are adjusted relative to that
speaker.
6
Press ENTER to make the settings and
exit the audio settings screen.
• The speaker distance settings have no
effect on SACD playback. The channel
level settings, however, do apply.
• You can’t adjust the channel level for
any speakers that are set to Off in the
Speaker Installation menu screen
(page 64).
• The Fix setting is equivalent to setting
all the channel levels to +6 dB. There-
fore, the Variable setting will usually
sound quieter than the Fix setting.
50
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Video Settings Menu
07
1
Select one of the Memory presets (see
Video Adjust
above).
• Default setting: Standard
2
Move the joystick down to select
From the Video Adjust screen you can select
the standard video presentation or define
presets of your own.
‘Detailed Settings’ then press ENTER.
Video Adjust
1
Press SETUP and select ‘Video Adjust’
I.Memory1
from the on-screen display.
Detailed Settings
You can also access these settings by
pressing V.ADJ (VIDEO ADJUST).
3
Adjust the picture quality settings.
Interlace Memory 1 (I. Memory 1)
Recall Settings
Fine Focus
Contrast
I.Memory1
On
Audio Settings
Play Mode
Video Adjust
min
soft
max
fine
max
red
Disc Navigator
Setup Navigator
Sharpness
Chroma Level
Hue
min
green
Initial Settings
• Use the joystick (up/down) to select a
setting.
2
Use the joystick (left/right) to select a
preset.
• Use the joystick (left/right) to adjust the
current setting.
Video Adjust
Standard
• Press DISPLAY to switch between full
and single view.
• You can change the preset number from
the Recall Settings menu item.
• Standard – Normal
• I. Memory1–2 / P. Memory1–2 – Use
for making your own interlaced /
progressive presets (see below)
You can adjust any or all of the following
picture quality settings:
• Fine Focus – Switch On to reveal
greater detail (high resolution) in the
picture.
3
Press ENTER to make the setting and
exit the Video Adjust screen.
• Contrast – Adjusts the contrast
between light and dark elements in the
picture.
• Depending on the disc and the TV/
monitor, you may not see the effect
clearly.
• Sharpness – Adjusts the sharpness of
the mid-frequency (less detailed)
elements in the picture. (This setting is
only effective when Fine Focus is On.)
Creating your own interlace
output presets
• Chroma Level – Adjusts how saturated
colors appear.
These presets are available when the video
output is set to interlace. (Use the front panel
PROGRESSIVE button to switch between
interlace and progressive video output. See
also page 18).
• Hue – Adjusts the overall color balance
between red and green. (This is only
effective when the player is connected
using the VIDEO OUT or
51
En
S-VIDEO OUT jacks.)
Download from Www.Somanuals.com. All Manuals Search And Download.
07
The Video Settings Menu
You can adjust any or all of the following
picture quality settings:
4
Press ENTER to save the preset and
exit the Video Adjust screen.
• PureCinema – When watching DVD
movies, PureCinema optimizes the
picture quality. The default setting is
Auto, but if the picture appears
unnatural, then set to On or Off, as
appropriate.
Creating your own progressive
output presets
These presets are available when the video
output is set to progressive. (Use the front
panel PROGRESSIVE button to switch
between interlace and progressive video
output. See also page 18)
• Sharpness – Adjusts the sharpness of
the mid-frequency (less detailed)
elements in the picture.
1
Select one of the Memory presets (see
• Contrast – Adjusts the contrast
between light and dark elements in the
picture.
above).
2
Move the joystick down to select
• Brightness – Adjusts the overall
brightness of the picture.
‘Detailed Settings’ then press ENTER.
• Chroma Level – Adjusts how saturated
Video Adjust
colors appear.
P. Memory1
Detailed Settings
• Hue – Adjusts the overall color balance
between red and green.
3
Adjust the picture quality settings.
3
Press ENTER to save the preset and
exit the Video Adjust screen.
Progressive Memory 1 (P. Memory 1)
P.Memory1
Auto
Recall Settings
PureCinema
Sharpness
Contrast
soft
soft
fine
fine
max
max
red
• Video on a DVD discs may be either
video material (originally shot on video)
or film material (originally shot on film).
Video material has a frame rate of 30
frames/sec.(NTSC), compared with 24
frames/sec. for film. This player converts
film material to 60 frames/sec. (in
progressive scan mode). PureCinema
adjusts the picture so that it matches
more closely the picture quality of a
cinema screen.
Brughtness
Chroma Level
Hue
off
min
green
• Use the joystick (up/down) to select a
setting.
• Use the joystick (left/right) to adjust the
current setting.
• Press DISPLAY to switch between full
and single view.
• You can change the preset number from
the Recall Settings menu item.
You can see whether video on a DVD
disc is film or video material by display-
ing the video transmission rate (see
page 46). If a hash mark (#) appears
next to the transmission rate display, it
is film material.
52
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Settings Menu
08
Using the Initial Settings
menu
Initial Settings
Digital Audio Out
Video Output
Language
Display
Digital Out
On
Off
The Initial Settings menu is where you can
set preferences for language, audio and
video output, and so on.
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
Options
Speakers
If a menu option is grayed out it means that
it cannot be changed at the current time.
This is usually because a disc is playing.
Stop the disc, then change the setting.
If at any time you need to switch off the
digital audio output, set this to Off, other-
wise leave it On.
1
Press SETUP and select ‘Initial Set-
tings’ from the on-screen display.
• You can’t switch on/off the optical and
coaxial outputs individually.
Audio Settings
Play Mode
Video Adjust
• There is no digital output when playing
SACDs and some DVD-Audio discs
regardless of this setting.
Disc Navigator
Setup Navigator
Initial Settings
Dolby Digital Out
2
Select the setup category from the list
• Default setting: Dolby Digital
on the left, then select an item from the
menu list to the right.
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
3
Make the setting you want.
Digital Audio Out settings
Initial Settings
Digital Audio Out
Video Output
Language
Display
Digital Out
Dolby Digital
Digital Out
Dolby Digital Out
DTS Out
Dolby Digital > PCM
• Default setting: On
Linear PCM Out
MPEG Out
Options
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
Speakers
If your AV receiver (or other connected
component) is Dolby Digital compatible, set
to Dolby Digital, otherwise set to Dolby
Digital > PCM.
53
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
The Initial Settings Menu
DTS Out
• Default setting: DTS > PCM
Initial Settings
Digital Audio Out
Video Output
Language
Display
Digital Out
Down Sample On
Down Sample Off
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
Dolby Digital Out
DTS Out
Linear PCM Out
MPEG Out
Options
Speakers
Initial Settings
If your AV receiver (or other connected
component) is compatible with high
Digital Audio Out
Video Output
Language
Display
Digital Out
DTS
Dolby Digital Out
DTS Out
DTS > PCM
sampling rates (96 kHz), set this to Down
Sample Off, otherwise set it to Down
Sample On (96 kHz audio is converted to a
more compatible 48 kHz). Check the manual
that came with the other component if you’re
unsure whether it is 96 kHz compatible.
Linear PCM Out
MPEG Out
Options
Speakers
If your AV receiver (or other connected
component) has a built-in DTS decoder, set
this to DTS, otherwise set to DTS > PCM
(DTS audio is converted to more compatible
PCM audio). Check the manual that came
with the other component if you’re unsure
whether it is DTS compatible.
• Even when set to Down Sample Off,
some discs will still output down-
sampled audio through the digital
outputs (you only get full sampling rate
audio through the analog outputs).
• High sampling rate DVD-Audio discs
(192kHz or 176.2kHz) automatically
output down-sampled audio through the
digital outputs.
• If you set to DTS with a non-DTS
compatible amplifier, noise will be
output when you play a DTS disc.
• This setting applies only to DTS audio on
DVDs. DTS-CD always output DTS
digital audio as-is regardless of this
setting.
MPEG Out
• Default setting: MPEG > PCM
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
Linear PCM Out
• Default setting: Down Sample On
You only need to make this setting if you
connected this system to an AV receiver (or
other component) using one of the digital
outputs.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Digital Out
MPEG
Dolby Digital Out
DTS Out
MPEG > PCM
Linear PCM Out
MPEG Out
Options
Speakers
54
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Settings Menu
08
If your AV receiver (or other connected
component) is compatible with MPEG audio,
set this to MPEG, otherwise set it to MPEG >
PCM (MPEG audio is converted to more
compatible PCM audio). Check the manual
that came with the other component if you’re
unsure whether it is MPEG audio compat-
ible.
Auto Progressive
• Default setting: Off
You only need to make this setting if you
connected this player to your TV using the
component video outputs.
Initial Settings
Digital Audio Out
Video Output
Language
Display
TV Screen
On
Off
Auto Progressive
S-Video Out
Still Picture
Video Output settings
Options
Speakers
TV Screen
• Default setting: 16:9 (Wide)
When set to On, 16:9 format DVD-Video
discs are output as progressive video, while
4:3 format discs are output as interlaced
video. DVD-RW, DVD-Audio and Video CD
discs are always output as 4:3 interlace
video. This corrects a problem with some TVs
that display 4:3 material stretched when fed
a progressive scan signal. If you do not
experience this problem you can leave this
setting as Off.
Initial Settings
Digital Audio Out
Video Output
Language
Display
4:3 (Letter Box)
4:3 (Pan&Scan)
16:9 (Wide)
TV Screen
Auto Progressive
S-Video Out
Still Picture
Options
Speakers
If you have a widescreen TV, select the 16:9
(Wide) setting—widescreen DVD software is
then shown using the full screen area. When
playing software recorded in conventional
(4:3) format, the settings on your TV will
determine how the material is presented—
see the manual that came with your TV for
details on what options are available.
S-Video Out
• Default setting: S2
You only need to make this setting if you
connected this player to your TV using an
S-Video cord.
If you have a conventional TV, select either
4:3 (Letter Box) or 4:3 (Pan & Scan). In
Letter Box mode, widescreen software is
shown with black bars at the top and bottom
of the screen. Pan & Scan chops the sides off
widescreen material to make it fit the 4:3
screen (so even though the image looks
larger on the screen, you’re actually seeing
less of the picture). See also page 70.
Initial Settings
Digital Audio Out
Video Output
Language
Display
TV Screen
S1
S2
Auto Progressive
S-Video Out
Still Picture
Options
Speakers
If you find that the picture is stretched or
distorted on the default S2 setting, try
changing it to S1. (See also S1 and S2 in the
Glossary on page 74.)
55
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
The Initial Settings Menu
Still Picture
• Default setting: Auto
Language settings
Audio Language
• Default setting: English
Initial Settings
Digital Audio Out
Video Output
Language
Display
TV Screen
Field
Frame
Auto
Auto Progressive
S-Video Out
Still Picture
Initial Settings
Options
Digital Audio Out
Video Output
Language
Display
Audio Language
Subtitle Language
Auto Language
DVD Menu Lang.
Subtitle Display
English
Speakers
French
German
Italian
Options
Spanish
Dutch
Speakers
This player uses one of two processes when
displaying a still frame from a DVD disc. The
default Auto setting automatically chooses
the best setting each time.
Other Language
This setting is your preferred audio language
for DVD-Video discs. If the language you
specify here is recorded on a disc, the
system automatically plays the disc in that
language.
• Field – produces a stable, generally
shake-free image
• Frame – produces a sharper image, but
more prone to shake than field stills
The DVD-Video format recognizes 136
different languages. Select Other Language
if you want to specify a language other than
those listed. See also Selecting languages
using the language code list on page 73.
• You can switch between the languages
recorded on a DVD disc during playback
using the AUDIO button. (This does not
affect this setting.) See page 44.
• Some DVD discs set the audio language
automatically when loaded, overriding
the audio language you set in the Initial
Settings menu.
• Discs with two or more audio languages
usually allow you to select the audio
language from the disc menu. Press
TOP MENU to access the disc menu.
56
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Settings Menu
08
Subtitle Language
• Default setting: English
Auto Language
• Default setting: On
Initial Settings
Initial Settings
Digital Audio Out
Video Output
Language
Display
Audio Language
Subtitle Language
Auto Language
DVD Menu Lang.
Subtitle Display
English
Digital Audio Out
Video Output
Language
Display
Audio Language
Subtitle Language
Auto Language
DVD Menu Lang.
Subtitle Display
On
Off
French
German
Italian
Options
Spanish
Dutch
Options
Speakers
Speakers
Other Language
This setting is your preferred subtitle
language for DVD-Video discs. If the lan-
guage you specify here is recorded on a disc,
the system automatically plays the disc with
those subtitles.
When set to On, the player always selects
the default audio language on a DVD-Video
disc (French dialog for a French movie, for
example), and displays subtitles in your
preferred subtitle language only if that is set
to something different. In other words,
movies in your native language won’t have
any subtitles, while foreign language movies
will be shown with subtitles.
The DVD-Video format recognizes 136
different languages. Select Other Language
if you want to specify a language other than
those listed. See also Selecting languages
using the language code list on page 73.
Set to Off to have the player play discs
strictly according to your Audio Language
and Subtitle Language settings.
For Auto Language to work, the Audio
Language and Subtitle Language settings
must be the same (see also pages 56–57).
• You can change or switch off the
subtitles on a DVD disc during playback
using the SUBTITLE button. (This does
not affect this setting.) See page 44.
• Some DVD discs set the subtitle
language automatically when loaded,
overriding the subtitle language you set
in the Initial Settings menu.
• You can still switch audio and subtitle
language on playback using the AUDIO
and SUBTITLE buttons.
• Discs with two or more subtitle
languages usually allow you to select
the subtitle language from the disc
menu. Press TOP MENU to access the
disc menu.
57
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
The Initial Settings Menu
DVD Menu Language
• Default setting: w/Subtitle Lang.
Display settings
OSD Language
• Default setting: English
Initial Settings
Digital Audio Out
Video Output
Language
Display
Audio Language
Subtitle Language
Auto Language
DVD Menu Lang.
Subtitle Display
w/Subtitle Lang.
Other Language
Initial Settings
Options
Digital Audio Out
Video Output
Language
Display
OSD Language
On Screen Display
Angle Indicator
Background
English
Speakers
français
Deutsch
Italiano
Options
Screen Saver
Español
Nederlands
Speakers
Some multilingual discs have disc menus in
several languages. This setting specifies in
which language the disc menus should
appear. Leave on the default setting for
menus to appear in the same language as
your Subtitle Language—see page 57.
This sets the language of this player’s on-
screen displays.
The DVD-Video format recognizes 136
On Screen Display
different languages. Select Other Language
if you want to specify a language other than
those listed. See also Selecting languages
using the language code list on page 73.
• Default setting: On
Initial Settings
Digital Audio Out
Video Output
Language
Display
OSD Language
On Screen Display
Angle Indicator
Background
On
Off
Subtitle Display
• Default setting: On
Options
Screen Saver
Speakers
Initial Settings
This sets whether operation displays are
shown on-screen (Play, Resume, Scan and
so on.)
Digital Audio Out
Video Output
Language
Display
Audio Language
Subtitle Language
Auto Language
DVD Menu Lang.
Subtitle Display
On
Off
Assist Subtitle
Options
Speakers
When set to On, the player displays subtitles
according to the Subtitle Language and Auto
Language settings. Set to Assist Subtitle to
have the player display the extra assistive
subtitles recorded on to some DVD discs. Set
to Off to switch subtitles off altogether.
58
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Settings Menu
08
If a constant image is displayed on a
Angle Indicator
conventional CRT-type TV, it can ‘burn in’
leaving a ghost image on the screen. Switch
to On to make sure that a constant image is
not displayed for a dangerously long time.
• Default setting: On
Initial Settings
Digital Audio Out
Video Output
Language
Display
OSD Language
On Screen Display
Angle Indicator
Background
On
Off
Options
Options
Screen Saver
Speakers
Parental Lock
• Default level: Off
If you prefer not to see the camera icon on-
screen during multi-angle scenes on DVD
discs, change this setting to Off.
• Default password: none
• Default country code: us (2119)
Some DVD Video discs feature a Parental
Lock level. If your player is set to a lower level
than the disc, the disc won’t play. This gives
you some control about what your children
watch on your DVD player.
Background
• Default setting: Pioneer Logo
Initial Settings
Some discs also support the Country Code
feature. The player does not play certain
scenes on these discs, depending on the
country code you set.
Digital Audio Out
Video Output
Language
Display
OSD Language
On Screen Display
Angle Indicator
Background
Pioneer Logo
Black
Options
Screen Saver
Before you can set the Parental Lock level or
the Country Code you must register a
password. As the password owner, you can
change the Parental Lock level or Country
Code whenever you like. You can also change
the password.
Speakers
This specifies what is displayed on-screen
when the player is stopped.
Screen Saver
• Default setting: On
• Not all discs that you may consider
inappropriate for your children use the
Parental Lock feature. These discs will
always play without requiring the
password first.
Initial Settings
Digital Audio Out
Video Output
Language
Display
OSD Language
On Screen Display
Angle Indicator
Background
On
Off
• If you forget your password, you’ll need
to reset the player to it’s factory settings
(page 70), then register a new pass-
word.
Options
Screen Saver
Speakers
59
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
The Initial Settings Menu
Registering a new password
You must register a password before you can
change the Parental Lock level or enter a
Country Code.
Changing your password
To change your password, confirm your
existing password then enter a new one.
1
Select ‘Password Change’.
1
Select ‘Password’.
Initial Settings
Initial Settings
Digital Audio Out
Video Output
Language
Display
Parental Lock
Password Change
Level Change
Digital Audio Out
Video Output
Language
Display
Parental Lock
Password
Bonus Group
Bonus Group
Level Change
Country Code
Auto Disc Menu
Group Playback
DVD Playback Mode
SACD Playback
CD Playback
Country Code
Auto Disc Menu
Group Playback
DVD Playback Mode
SACD Playback
CD Playback
Options
Options
Speakers
Speakers
2
Use the number buttons to enter a 4-
2
Use the number buttons to enter your
digit password.
existing password, then press ENTER.
• The numbers appear as asterisks as you
enter them.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Parental Lock: Register Code Number
Initial Settings
1
2
3
4
Parental Lock : Password Change
Password
Digital Audio Out
Video Output
Language
Display
Options
Speakers
1
*
*
*
New Password
Options
Speakers
The numbers you enter show up as asterisks
(*) on-screen.
3
Press ENTER to register the password
3
Enter a new password.
and return to the Options menu screen.
If you forget your password, you can reset
the system then register a new one. See
page 70 for how to reset the player.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Parental Lock : Password Change
Password
*
*
*
*
New Password
2
4
5
3
Options
Speakers
4
Press ENTER to register the new
password and return to the Options
menu screen.
60
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Settings Menu
08
Setting/changing the Parental Lock
level
Setting/changing the Country Code
You may also want to refer to the Country
code list on page 72.
1
Select ‘Level Change’.
1
Select ‘Country Code’.
Initial Settings
Initial Settings
Digital Audio Out
Video Output
Language
Display
Parental Lock
Password Change
Level Change
Bonus Group
Digital Audio Out
Video Output
Language
Display
Parental Lock
Password Change
Level Change
Auto Disc Menu
Group Playback
DVD Playback Mode
SACD Playback
CD Playback
Country Code
Bonus Group
Auto Disc Menu
Group Playback
DVD Playback Mode
SACD Playback
CD Playback
Country Code
Options
Speakers
Options
Speakers
2
Use number buttons to enter your
password, then press ENTER.
2
Use number buttons to enter your
password, then press ENTER.
Initial Settings
Initial Settings
Parental Lock : Level Change
Digital Audio Out
1
Video Output
Language
Display
Password
*
*
*
Parental Lock : Change Country Code
Digital Audio Out
Video Output
Language
Display
1
Password
*
*
*
Options
Country Code List
us
Code
Speakers
1
2
3
4
5
6
7
8
off
Options
2
1
1
9
Speakers
3
Select a new level.
3
Select a country code.
Initial Settings
There are two ways you can do this.
Parental Lock : Level Change
Password
• Select by code letter: Use the joystick
(up/down) to change the country code.
Digital Audio Out
Video Output
Language
Display
*
*
*
*
Options
Initial Settings
Speakers
1
2
3
4
5
6
7
8
off
Parental Lock : Change Country Code
Digital Audio Out
Video Output
Language
Display
Password
*
*
*
*
Move the joystick left to lock more levels
(more discs will require the password); move
right to unlock levels. You can’t lock level 1.
Country Code List
us
Code
Options
2
1
1
9
Speakers
4
Press ENTER to set the new level and
• Select by code number: Move the
joystick right then use the number
buttons to enter the 4-digit country code
(you can find the Country code list on
page 72).
return to the Options menu screen.
61
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
The Initial Settings Menu
Initial Settings
Initial Settings
Parental Lock : Change Country Code
Digital Audio Out
Digital Audio Out
Video Output
Language
Display
Bonus Group : Key Number Input
Video Output
Language
Display
Password
*
*
*
*
2
*
*
*
Country Code List
us
Code
Options
Options
2
1
1
9
Speakers
Speakers
4
Press ENTER to set the new Country
Code and return to the Options menu
screen.
• If you eject the disc, switch the power
off, or unplug the player, you will need to
re-enter the key number.
• Changing the country code does not
take effect until the next disc is loaded
(or the current disc is reloaded).
Auto Disc Menu
• Default setting: On
Initial Settings
Bonus Group
Digital Audio Out
Video Output
Language
Display
Parental Lock
Bonus Group
On
Off
Auto Disc Menu
Group Playback
DVD Playback Mode
SACD Playback
CD Playback
Initial Settings
Options
Speakers
‰
Off (us)
Digital Audio Out
Video Output
Language
Display
Parental Lock
Bonus Group
‰
‰
‰
‰
‰
On
Auto Disc Menu
Group Playback
DVD Playback Mode
SACD Playback
CD Playback
Single
This specifies whether the menu (Top menu)
is automatically displayed after loading a
disc. Set to On if you want the menu
displayed automatically, or Off if you don’t
want it displayed.
DVD-Audio
2ch Area
PCM Playback
Options
Speakers
Some DVD-Audio discs have an extra ‘bonus’
group that requires a 4-digit key number to
access. See the disc packaging for details
and the key number.
• Some DVD discs display a menu
automatically regardless of this setting.
If you press 3 while a disc is loading,
this setting is ignored.
When you play a DVD-Audio disc that has a
bonus group, the key number input screen
appears automatically. You can also access
the same screen here.
62
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Settings Menu
08
Group Playback
• Default setting: Single
DVD Playback Mode
• Default setting: DVD-Audio
Initial Settings
Initial Settings
Digital Audio Out
Video Output
Language
Display
Parental Lock
Bonus Group
All
Digital Audio Out
Video Output
Language
Display
Parental Lock
Bonus Group
DVD-Audio
DVD-Video
Single
Auto Disc Menu
Group Playback
DVD Playback Mode
SACD Playback
CD Playback
Auto Disc Menu
Group Playback
DVD Playback Mode
SACD Playback
CD Playback
Options
Options
Speakers
Speakers
DVD-Audio discs can have up to 9 groups of
tracks. When set to Single, the selected
group plays and then the disc stops, or
returns to the menu screen. Use Group
Search (page 43) to select the group to play.
(You cannot use the track skip 4 / ¢ or
scan buttons 1 / ¡ in this mode.)
Some DVD-Audio discs contain DVD-Video
content in addition to the DVD-Audio. Set to
DVD-Video to play a DVD-Audio disc as if it
were a DVD-Video disc. Note that in this case
only the DVD-Video part of the disc will play.
SACD Playback
• Default setting: 2ch Area
Set to All if you want to play all the groups
on a disc consecutively.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Parental Lock
Bonus Group
2ch Area
Multi-ch Area
CD Area
Auto Disc Menu
Group Playback
DVD Playback Mode
SACD Playback
CD Playback
• Even if the players is set to All but you
select a group to play from the disc
menu, only that group will play. If you
stop playback, all groups will play again
when you restart playback.
Options
Speakers
SACD discs can be divided up into several
different areas — stereo audio (2ch Area),
multi-channel audio (Multi-ch Area) and, for
hybrid SACDs, standard CD audio (CD
Area). Select which you want to listen to.
• If you select an area that isn’t on the
disc loaded, a different area of the disc
will play. For example, if you choose
standard CD audio but the disc loaded
is not a hybrid SACD, the stereo SACD
audio will play.
63
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
The Initial Settings Menu
CD Playback
• Default setting: PCM Playback
• Even if you set Audio Output Mode to
5.1 Channel, you’ll only get sound from
all speakers when playing a multi-
Initial Settings
channel DVD-Audio disc, SACD, or
Dolby Digital or DTS encoded DVD disc.
Digital Audio Out
Video Output
Language
Display
Parental Lock
Bonus Group
PCM Playback
DTS CD Playback
Auto Disc Menu
Group Playback
DVD Playback Mode
SACD Playback
CD Playback
• When set to 5.1 Channel, only the front
left/right channels are output from the
AUDIO OUT (2ch) jacks. Change to
2 Channel if you want to listen to
downmixed stereo audio (for example,
because you are listening through the
TV’s built-in speakers).
Options
Speakers
When set to PCM Playback, playback is
optimized for standard audio CDs. You can
also play DTS CDs, however you may notice
some noise when a DTS CD starts playing.
Also, speakers which were set to Small in
the Speaker Installation screen are
automatically set to Large. This is not a
malfunction.
• When set to 5.1 Channel there is no
digital output when playing DVD-Audio.
• If you set to 2 Channel, Dolby Digital,
DTS and MPEG audio is mixed down to
two channels so you still hear all the
audio recorded on the disc.
When set to DTS CD Playback, playback is
optimized for DTS CDs. In this mode you
cannot play standard audio CDs through the
analog outputs. Change the setting back to
PCM Playback to play standard CDs.
• Some DVD-Audio discs don’t allow
down-mixing of audio. These discs
always output multi-channel audio
regardless of the setting made here.
Speakers
Speaker Installation
• Set in Setup Navigator (default: L/R:
Large | C: Large | LS/RS: Large| SW:
On )
Audio Output Mode
• Set in Setup Navigator (Default: 2
Channel)
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
Initial Settings
This setting does not affect digital audio
output.
Digital Audio Out
Video Output
Language
Display
Audio Output Mode
Speaker Installation
Speaker Distance
Channel Level
2 Channel
5.1 Channel
Options
Initial Settings
Speakers
Digital Audio Out
Video Output
Language
Display
Audio Output Mode
Speaker Installation
Speaker Distance
Channel Level
‰
‰
2 Channel
Fix
If you connected this player to your amplifier
using the 5.1 channel analog outputs (front,
surround, center and subwoofer outs), set
this to 5.1 Channel; if you connected only
the stereo outs, set to 2 Channel.
Options
Speakers
64
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Settings Menu
08
Use the Speaker Installation screen to tell
the player what kinds of speakers you have
connected.
Speaker Distance
• Default setting: all speakers 10 ft.
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
1
Use the joystick to move the cursor
up/down to select a speaker.
• The L and R, and RS and LS speakers
are paired; you can’t set them differ-
ently.
To get the best surround sound from your
system, you should set up the speaker
distances from your listening position.
Initial Settings
Initial Settings
Digital Audio Out
Video Output
L
C
R
RS
LS
SW
Large
Large
Large
Large
Large
On
Digital Audio Out
Video Output
Language
Display
Audio Output Mode
Speaker Installation
Speaker Distance
Channel Level
‰
‰
2 Channel
Fix
Language
Display
Options
Speakers
Options
Speakers
2
Move the cursor right to modify the
selected speaker.
1
Use the joystick to move the cursor
3
Use the joystick (up/down) to change
up/down to select a speaker.
• The L and R speakers are paired; you
can’t set them differently.
the current setting.
• You can see the effect of your changes
in the room graphic on the right of the
screen.
Initial Settings
• Except for the subwoofer, you can set
speaker size to Large or Small. If the
main speaker cone in the speaker is
12cm or more, set to Large, otherwise
set to Small (or Off if you don’t have
that speaker).
Digital Audio Out
Video Output
L
C
R
RS
LS
SW
10.0 ft.
10.0 ft.
10.0 ft.
10.0 ft.
10.0 ft.
10.0 ft.
Language
Display
Options
Speakers
• If you set the front L and R speakers to
Small, the center and surround speak-
ers are automatically set to Small and
the subwoofer to On.
2
Move the cursor right to change the
speaker distance for the highlighted
speaker.
• The subwoofer can only be set to On or
Off.
4
Move the joystick left to go back to
the speaker list if you want to modify
another speaker, or press ENTER to exit
the Speaker Installation screen.
65
En
Download from Www.Somanuals.com. All Manuals Search And Download.
08
The Initial Settings Menu
When set to Fix, the level of each of the 5.1
channel analog outputs is fixed. Choose
Variable if you want to adjust the relative
levels to balance the surround sound better
for your listening room.
3
Use the joystick (up/down) to change
the distance.
• When you change the distance settings
of the front left (L) or front right (R)
speakers, all the other speaker dis-
tances change relative to it.
Initial Settings
• Front left/right (L/R) speakers can be set
from 1 ft. to 30 ft. in 0.5 ft. increments.
Auto
Digital Audio Out
Video Output
Language
Display
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
L
C
R
RS
LS
SW
• Center speaker (C) and subwoofer (SW)
can be set from – 6.5 ft. to +6.5 ft.
relative to the front left/right speakers
Options
Speakers
• Surround left/right (LS/RS) speakers can
be set from –20 ft. to +6.5 ft. relative to
the front left/right speakers.
You can set the individual channel levels
between –6dB and +6dB using the test tone
output as a guide to set the correct levels.
Adjust the levels until the output level from
all channels sounds the same from your
usual listening position.
4
Move the cursor left to go back to the
speaker list if you want to modify
another speaker, or press ENTER to exit
the Speaker Distance screen.
Automatic: Select Auto to start the test tone
output.
• Speaker Distance settings do not affect
SACD playback.
Initial Settings
Auto
Digital Audio Out
Video Output
Language
Display
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
L
C
R
RS
LS
SW
Channel Level
Options
Speakers
• Default setting: Fix
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
As the test tone plays through each speaker
in turn, it is highlighted on-screen. Use the
joystick (up/down) to adjust the channel
output level of the current speaker. Note that
the test tone is not output from the
subwoofer. Move the joystick left to exit the
test tone sequence, or ENTER to save the
settings and exit the channel level setting
screen.
This setting does not affect digital audio
output.
Initial Settings
Digital Audio Out
Video Output
Language
Display
Audio Output Mode
Speaker Installation
Speaker Distance
Channel Level
Fix
Variable
Options
Speakers
66
En
Download from Www.Somanuals.com. All Manuals Search And Download.
The Initial Settings Menu
08
Manual: Move the cursor up/down to select a
speaker.
Initial Settings
Auto
Digital Audio Out
Video Output
Language
Display
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
L
C
R
RS
LS
SW
Options
Speakers
Move the joystick right then use the joystick
(up/down) to set the channel output level.
Initial Settings
Auto
Digital Audio Out
Video Output
Language
Display
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
L
C
R
RS
LS
SW
Options
Speakers
To turn the test tone on/off for an individual
speaker, press (Joystick right). The test
tone continues playing even when you select
a different speaker.
Initial Settings
Auto
Digital Audio Out
Video Output
Language
Display
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
L
C
R
RS
LS
SW
Options
Speakers
Press ENTER to save the settings and exit the
channel level setting screen.
67
En
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Additional Information
Storing discs
Taking care of your player
and discs
Although CDs and DVD discs are more
durable than vinyl records, you should still
take care to handle and store discs correctly.
When you're not using a disc, return it to its
case and store upright. Avoid leaving discs
in excessively cold, humid, or hot environ-
ments (including under direct sunlight).
Handling discs
When holding discs of any type, take care
not to leave fingerprints, dirt or scratches on
the disc surface. Hold the disc by its edge or
by the center hole and edge.
Don't glue paper or put stickers onto the
disc, or use a pencil, ball-point pen or other
sharp-tipped writing instrument. These could
all damage the disc.
Damaged or dirty discs can affect playback
performance. Take care also not to scratch
the label side of the disc. Although not as
fragile as the recorded side, scratches can
still result in a disc becoming unusable.
Should a disc become marked with finger-
prints, dust, etc., clean using a soft, dry
cloth, wiping the disc lightly from the center
to the outside edge as shown in the diagram
below.
For more detailed care information see the
instructions that come with discs.
Do not load more than one disc into the
player at a time.
Discs to avoid
Discs spin at high speed inside the player. If
you can see that a disc is cracked, chipped,
warped, or otherwise damaged, don't risk
using it in your player—you could end up
damaging the unit.
Wipe lightly from the center of the
disc using straight strokes.
Don’t wipe the disc surface using
circular strokes.
If necessary, use a cloth soaked in alcohol,
or a commercially available CD/DVD
cleaning kit to clean a disc more thoroughly.
Never use benzine, thinner or other cleaning
agents, including products designed for
cleaning vinyl records.
This unit is designed for use with conven-
tional, fully circular discs only. Use of shaped
discs is not recommended for this product.
Pioneer disclaims all liability arising in
connection with the use of shaped discs.
68
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
09
✗ Place directly on top of an amplifier, or
other component in your stereo system
that becomes hot in use.
Cleaning the pickup lens
The DVD player’s lens should not become
dirty in normal use, but if for some reason it
should malfunction due to dust or dirt,
consult your nearest Pioneer-authorized
service center. Although lens cleaners for CD
players are commercially available, we do
not recommend using them since some may
damage the lens.
✗ Use near a television or monitor as you
may experience interference—especially
if the television uses an indoor antenna.
✗ Use in a kitchen or other room where
the player may be exposed to smoke or
steam.
✗ Use on a thick rug or carpet, or cover
with cloth—this may prevent proper
cooling of the unit.
Problems with condensation
Condensation may form inside the player if it
is brought into a warm room from outside, or
if the temperature of the room rises quickly.
Although the condensation won’t damage
the player, it may temporarily impair its
performance. For this reason you should
leave it to adjust to the warmer temperature
for about an hour before switching on and
using.
✗ Place on an unstable surface, or one
that is not large enough to support all
four of the unit’s feet.
Moving the player
If you need to move the player, first press
STANDBY/ON on the front panel to turn
the player off. Wait for --OFF-- to disappear
from the display, then unplug the power
cord. Never lift or move the unit during
playback—discs rotate at a high speed and
may be damaged.
Hints on installation
We want you to enjoy using this unit for
years to come, so please bear in mind the
following points when choosing a suitable
location for it:
Power cord caution
Do...
Handle the power cord by the plug part. Do
not pull out the plug by tugging the cord,
and never touch the power cord when your
hands are wet, as this could cause a short
circuit or electric shock. Do not place the
unit, a piece of furniture, or other object on
the power cord or pinch the cord in any other
way. Never make a knot in the cord or tie it
with other cords. The power cords should be
routed so that they are not likely to be
stepped on. A damaged power cord can
cause a fire or give you an electric shock.
Check the power cord once in a while. If you
find it damaged, ask your nearest Pioneer
authorized service center or your dealer for a
replacement.
✗ Use in a well-ventilated room.
✗ Place on a solid, flat, level surface, such
as a table, shelf or stereo rack.
Don’t...
✗ Use in a place exposed to high tempera-
tures or humidity, including near
radiators and other heat-generating
appliances.
✗ Place on a window sill or other place
where the player will be exposed to
direct sunlight.
✗ Use in an excessively dusty or damp
environment.
69
En
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Additional Information
Set to 4:3(Pan&Scan), widescreen discs are
shown with the left and right sides cropped.
Although the picture looks larger, you don’t
actually see the whole picture.
Screen sizes and disc formats
DVD-Video discs come in several different
screen aspect ratios, ranging from TV
programs, which are generally 4:3, to
CinemaScope widescreen movies, with an
aspect ratio of up to about 7:3.
Televisions, too, come in different aspect
ratios; ‘standard’ 4:3 and widescreen 16:9.
Widescreen TV users
If you have a widescreen TV, the TV Screen
setting (page 55) of this player should be set
to 16:9(Wide).
Please note that many widescreen discs
override the player’s settings so that the disc
is shown in letterbox format regardless of the
setting.
When you watch discs recorded in 4:3
format, you can use the TV controls to select
how the picture is presented. Your TV may
offer various zoom and stretch options; see
the instructions that came with your TV for
details.
• Using the 16:9 (Wide) setting with a
standard 4:3 TV, or either of the 4:3
settings with a widescreen TV, will result
in a distorted picture.
Please note that some movie aspect ratios
are wider than 16:9, so even though you have
a widescreen TV, these discs will still play in
a ‘letterbox’ style with black bars at the top
and bottom of the screen.
Resetting the player
Use this procedure to reset all the player’s
settings to the factory default.
1
2
Switch the player into standby.
Standard TV users
If you have a standard TV, the TV Screen
setting (page 55) of this player should be set
to 4:3 (Letter Box) or 4:3 (Pan&Scan),
depending on which you prefer.
Using the front panel buttons, hold
down the 7 (stop) button and press
STANDBY/ON to switch the player back
on.
All the player’s settings are now reset, and
you should see the ‘Let’s Get Started’ screen.
Set to 4:3 (Letter Box), widescreen discs are
shown with black bars top and bottom.
70
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
09
About the audio output settings
The table below shows how the audio settings you make in the Initial Settings menu (pages
53-54, 64) affect the output from the 2 channel and the 5.1 channel analog outputs, and from
the digital outputs with various types of disc.
Disc audio format
Dolby Digital
Player setting
Front L/R
Surround L/R
Digital outputs
analog outputs*1 Center, LFE, outputs*1 PCM convert*2
Bitstream*3
Dolby Digital
Dolby Digital
Left / Right
DTS
2 Ch
2ch downmix
Front L / R
–
2ch downmix
Left / Right
Left / Right
2ch downmix
Surround L/R,
Center, LFE
5.1 Ch
Dolby Digital
karaoke
2 Ch / 5.1 Ch
Left / Right
–
Linear PCM
DTS
2 Ch / 5.1 Ch
2 Ch
Left / Right
2ch downmix
Front L / R
–
–
Surround L/R,
Center, LFE
5.1 Ch
MPEG
2 Ch / 5.1 Ch
2 Ch
Left / Right
2ch downmix*4
Front L / R
–
–
Left / Right
2ch downmix*5
–
MPEG
DVD-Audio
2ch downmix*5
–
Surround L/R,
Center, LFE
5.1 Ch
DVD-RW
2 Ch / 5.1 Ch
Left / Right*6
–
Left / Right
Dolby Digital
MPEG or PCM
Super Audio CD
2 Ch
2ch downmix
Front L / R
–
–
–
Surround L/R,
Center, LFE
5.1 Ch
CD
2 Ch / 5.1 Ch
2 Ch
Left / Right
2ch downmix
Front L / R
–
–
Left / Right
DTS
Left / Right
DTS
DTS CD
Surround L/R,
Center, LFE
5.1 Ch
Video CD /
Super VCD
2 Ch / 5.1 Ch
Left / Right
–
Left / Right
Left / Right
*1 When Audio Output Mode is set to 2 Channel, the AUDIO OUT (5.1ch) FRONT L / R
jacks act as a second pair of stereo audio outputs.
*2 Dolby Digital > PCM, MPEG > PCM or DTS > PCM setting (pages 53-54)
*3 Dolby Digital, MPEG or DTS setting (pages 53-54)
*4 Discs that prohibit downmixing will be output as 5.1 channel even if 2 Channel is selected
as the Audio Output Mode setting (see page 64)
*5 Discs that prohibit downmixing also mute the digital output
*6 If the sound is mono, the Left and Right channels will be the same
71
En
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Additional Information
Language code list
Language (Language code letter), Language code
Japanese (ja), 1001
English (en), 0514
French (fr), 0618
German (de), 0405
Italian (it), 0920
Spanish (es), 0519
Chinese (zh), 2608
Dutch (nl), 1412
Portuguese (pt), 1620
Swedish (sv), 1922
Russian (ru), 1821
Korean (ko), 1115
Greek (el), 0512
Bhutani (dz), 0426
Esperanto (eo), 0515
Estonian (et), 0520
Basque (eu), 0521
Persian (fa), 0601
Finnish (fi), 0609
Fiji (fj), 0610
Faroese (fo), 0615
Frisian (fy), 0625
Kirghiz (ky), 1125
Latin (la), 1201
Lingala (ln), 1214
Laothian (lo), 1215
Lithuanian (lt), 1220
Latvian (lv), 1222
Sinhalese (si), 1909
Slovak (sk), 1911
Slovenian (sl), 1912
Samoan (sm), 1913
Shona (sn), 1914
Somali (so), 1915
Albanian (sq), 1917
Serbian (sr), 1918
Siswati (ss), 1919
Sesotho (st), 1920
Sundanese (su), 1921
Swahili (sw), 1923
Tamil (ta), 2001
Malagasy (mg), 1307
Maori (mi), 1309
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Moldavian (mo), 1315
Marathi (mr), 1318
Malay (ms), 1319
Maltese (mt), 1320
Burmese (my), 1325
Nauru (na), 1401
Nepali (ne), 1405
Norwegian (no), 1415
Occitan (oc), 1503
Oromo (om), 1513
Oriya (or), 1518
Panjabi (pa), 1601
Polish (pl), 1612
Pashto, Pushto (ps), 1619 Twi (tw), 2023
Quechua (qu), 1721
Rhaeto-Romance (rm), 1813 Urdu (ur), 2118
Kirundi (rn), 1814
Romanian (ro), 1815
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sindhi (sd), 1904
Sangho (sg), 1907
Serbo-Croatian (sh), 1908 Zulu (zu), 2621
Irish (ga), 0701
Scots-Gaelic (gd), 0704
Galician (gl), 0712
Guarani (gn), 0714
Gujarati (gu), 0721
Hausa (ha), 0801
Hindi (hi), 0809
Croatian (hr), 0818
Hungarian (hu), 0821
Armenian (hy), 0825
Interlingua (ia), 0901
Interlingue (ie), 0905
Inupiak (ik), 0911
Indonesian (in), 0914
Icelandic (is), 0919
Hebrew (iw), 0923
Yiddish (ji), 1009
Javanese (jw), 1023
Georgian (ka), 1101
Kazakh (kk), 1111
Greenlandic (kl), 1112
Cambodian (km), 1113
Kannada (kn), 1114
Kashmiri (ks), 1119
Kurdish (ku), 1121
Afar (aa), 0101
Telugu (te), 2005
Tajik (tg), 2007
Thai (th), 2008
Abkhazian (ab), 0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Assamese (as), 0119
Aymara (ay), 0125
Azerbaijani (az), 0126
Bashkir (ba), 0201
Byelorussian (be), 0205
Bulgarian (bg), 0207
Bihari (bh), 0208
Bislama (bi), 0209
Bengali (bn), 0214
Tibetan (bo), 0215
Breton (br), 0218
Catalan (ca), 0301
Corsican (co), 0315
Czech (cs), 0319
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Setswana (tn), 2014
Tonga (to), 2015
Turkish (tr), 2018
Tsonga (ts), 2019
Tatar (tt), 2020
Ukrainian (uk), 2111
Uzbek (uz), 2126
Vietnamese (vi), 2209
Volapük (vo), 2215
Wolof (wo), 2315
Xhosa (xh), 2408
Yoruba (yo), 2515
Welsh (cy), 0325
Danish (da), 0401
Country code list
Country, Country code, Country code letter
Argentina, 0118, ar
Australia, 0121, au
Austria, 0120, at
Belgium, 0205, be
Brazil, 0218, br
Canada, 0301, ca
Chile, 0312, cl
China, 0314, cn
Denmark, 0411, dk
Finland, 0609, fi
France, 0618, fr
Germany, 0405, de
Hong Kong, 0811, hk
India, 0914, in
Indonesia, 0904, id
Italy, 0920, it
Japan, 1016, jp
Korea, Republic of, 1118, kr
Malaysia, 1325, my
Mexico, 1324, mx
Netherlands, 1412, nl
New Zealand, 1426, nz
Norway, 1415, no
Pakistan, 1611, pk
Philippines, 1608, ph
Portugal, 1620, pt
Russian Federation, 1821, ru
Singapore, 1907, sg
Spain, 0519, es
Sweden, 1905, se
Switzerland, 0308, ch
Taiwan, 2023, tw
Thailand, 2008, th
United Kingdom, 0702, gb
United States of America, 2119, us
72
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
09
Digital audio
Selecting languages using
the language code list
An indirect representation of sound by
numbers. During recording, the sound is
measured at discrete intervals (44,100 times
a second for CD audio) by an analog-to-
digital converter, generating a stream of
numbers. On playback, a digital-to-analog
converter generates an analog signal based
on these numbers. See also Sampling
frequency and Analog audio.
Some of the language options (such as ‘DVD
Language’ in the Setup Navigator) allow you
to set your preferred language from any of
the 136 languages listed in the language
code list on the previous page.
1
2
Select ‘Other Language’.
Use the joystick (left/right) to high-
Dolby Digital 1
light either the language name or code
number.
Using a maximum of 5.1 channels of audio,
this high quality surround system is used in
many of the finer movie theaters around the
world.
3
Use the joystick (up/down) to change
the language or code number.
• You can also use the number buttons if
you’re entering a language code.
The on-screen display shows which channels
are active, for example showing 3/2.1. The 3
being the two front channels and the center
channel; the 2 being the surround channels,
and the .1 being the LFE channel.
See the language code list on the previous
page for a complete list of languages and
codes.
R
Glossary
Analog audio
An electrical signal that directly represents
sound. Compare this to digital audio which
can be an electrical signal, but is an indirect
representation of sound. See also Digital
audio.
DTS
DTS stands for Digital Theater System. DTS
is a surround system different from Dolby
Digital that has become a popular surround
sound format for movies.
Dynamic range
The difference between the quietest and
loudest sounds possible in an audio signal
(without distorting or getting lost in noise).
Dolby Digital and DTS soundtracks are
capable of a very wide dynamic range,
delivering dramatic cinema-like effects.
Aspect ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the
screen is almost square); widescreen models
are 16:9 (the screen is almost twice as wide
as it is high). See also page 55.
File extension
A tag added to the end of a filename to
indicate the type of file. For example, “.mp3”
indicates an MP3 file. See also page 10.
Bonus Group (DVD-Audio only)
An ‘extra’ group on some DVD-Audio discs
that requires a key number to access. See
also Group. See also page 62.
Interlaced video
A method of displaying a picture in which
odd-numbered lines are updated in one
pass, then even-numbered lines updated in
the next. See also Progressive scan video.
Browsable pictures (DVD-Audio only)
A feature of some DVD-Audio discs in which
the user can browse still pictures recorded
on the disc as the audio is played. See also
Slideshow.
73
En
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Additional Information
MP3
Regions (DVD-Video only)
MP3 (MPEG1 audio layer 3) is a compressed
audio file format. Files are recognized by
their file extension “.mp3” or “.MP3”. See
also pages 10–11.
These associate discs and players with
particular areas of the world. This unit will
only play discs that have compatible region
codes. You can find the region code of your
unit by looking on the rear panel. Some discs
are compatible with more than one region
(or all regions). See also page 11.
MPEG audio
An audio format used on Video CDs and
some DVD discs. This unit can convert
MPEG audio to PCM format for wider
compatibility with digital recorders and AV
amplifiers. See also PCM.
S1 S-video output
This S-video signal format includes aspect
ratio information (4:3 or 16:9) within the
video signal. TVs which are compatible with
S1 S-video automatically switch aspect ratio
according to the signal. See also page 55.
MPEG video
The video format used for Video CDs and
DVDs. Video CD uses the older MPEG-1
standard, while DVD uses the newer and
much better quality MPEG-2 standard.
S2 S-video output
S2 is an enhanced version of S-video which,
in addition to aspect ratio information,
contains letterbox / pan & scan information.
Widescreen TVs which are compatible with
S2 S-video automatically switch aspect ratio
according to the signal. See also page 55.
Packed PCM (DVD-Audio only)
A lossless compression system that enables
more PCM audio to be stored on a DVD-
Audio disc than would otherwise be pos-
sible.
Sampling frequency
PCM (Pulse Code Modulation)
The rate at which sound is measured to be
turned into digital audio data. The higher the
rate, the better the sound quality, but the
more digital information is generated.
Standard CD audio has a sampling fre-
quency of 44.1kHz, which means 44,100
samples (measurements) per second. See
also Digital audio.
The most common system of encoding
digital audio, found on CDs and DAT.
Excellent quality, but requires a lot of data
compared to formats such as Dolby Digital
and MPEG audio. For compatibility with
digital audio recorders (CD, MD and DAT)
and AV amplifiers with digital inputs, this
unit can convert Dolby Digital, DTS and
MPEG audio to PCM. See also Digital audio.
Slidshow (DVD, Video CD)
A feature of some DVD discs in which still
pictures recorded on the disc cycle automati-
cally as the audio is played. See also
Browsable Picture.
PBC (PlayBack Control) (Video CD only)
A system of navigating a Video CD through
on-screen menus recorded onto the disc.
Especially good for discs that you would
normally not watch from beginning to end all
at once—karaoke discs, for example.
Super Audio CD (SACD)
Super Audio CD is a high quality audio disc
format that can accommodate high sam-
pling rate stereo and multi-channel audio, as
well as conventional CD audio all on the
same disc.
Progressive scan video
Also called non-interlaced video, this method
of displaying a picture updates all the lines
in one pass, resulting in a more stable,
flicker-free image than interlaced video (for a
given scanning rate). See also Interlaced
video. See also page 19.
74
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Troubleshooting
09
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something
wrong with this component, check the points below. Sometimes the trouble may lie in another
component. Inspect the other components and electrical appliances being used. If the trouble
cannot be rectified after checking the items below, ask your nearest Pioneer authorized service
center or your dealer to carry out repair work.
Problem
Cause / Remedy
The disc won’t play or is
automatically ejected after
loading.
• Make sure the disc is free from dirt and dust and is not
damaged (page 68).
• Make sure the disc is loaded with the label side face-up and
aligned properly in the disc tray guide.
• Incompatible region number: If the region number on a DVD-
Video disc does not match the number on the player, the disc
cannot be used (page 11).
• Condensation inside the player: Allow time for condensation to
evaporate. Avoid using the player near an air-conditioning unit.
• Disc is loaded upside down: Reload the disc with the label side
face up.
DVD-Audio playback stops.
• The disc may have been illegally copied.
Picture playback stops and the • Press 7, then start playback again (3).
operation buttons cannot be • Switch the power off once, unplug from the wall socket, then
used.
plug back in and switch on again using the front panel
STANDBY/ON button.
New settings made in the
Setup screen menus while a
• Some settings can be changed while a disc is playing, but are
not effective until the disc is stopped then restarted: Press 7, then
disc is playing are ineffective. start playback again (3).
Settings are canceled.
• When the power is cut due to power failure or by unplugging
the power cord, settings will be canceled: Press STANDBY/ON
on the front panel to turn the player off. Wait for -OFF- to disap-
pear from the display, then unplug the power cord.
The remote control doesn't
seem to work.
• The CONTROL IN jack on the rear panel is connected: Point the
remote control at the connected component to control this player.
• The remote control is too far from the player, or the angle with
the remote sensor is too wide: Use the remote within its operating
range (page 9).
• The batteries are exhausted: Put in new ones (page 9).
75
En
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Additional Information
Problem
Cause / Remedy
No picture/No color.
• Check that the VIDEO OFF indicator is not lit. If it is, press the
VIDEO OFF button (page 18).
• Incorrect video connections: Check that connections are
correct and that plugs are inserted fully. Also check the video
cable for damage.
• TV/monitor or AV amplifier settings are incorrect: Check the
instruction manual of the connected equipment.
• The video output is set to progressive but your TV/monitor is not
compatible with progressive scan: Press the PROGRESSIVE
button on the front panel to set to interlace (the indicator above
the button should not be lit) (page 18).
• When set to progressive video output, there is no video output
from the composite or S-video outputs.
Screen is stretched or aspect
does not change.
• The TV Screen setting in the Initial Settings menu is incorrect
(page 55). See page 70 for how to set it correctly for your TV/
monitor.
• If your TV/monitor is connected using an S-video cable, try
changing the S-Video Out setting (page 55).
Picture disturbance during
• This player is compatible with Macro-Vision System copy guard.
playback or the picture is dark. Some discs include a copy prevention signal, and when this type
of disc is played back, stripes etc., may appear on some sections
of the picture depending on the TV. This is not a malfunction.
• Due to the player’s copy protection circuits, connection of this
device through a VCR or an AV selector may prevent recording or
cause picture problems. This is not a malfunction.
No audio, or audio is dis-
torted.
• No audio is output during slow motion playback or when
scanning discs other than audio CDs
• Some DVD discs do not output digital audio: Switch your
amplifier to the player's analog outputs.
• Check that the disc is free from dust and dirt, and that it is not
damaged (page 68).
• Check that all interconnects are firmly inserted.
• Check that the plugs and terminals are free of dirt, oxide, etc.
and clean if necessary. Also check the cable for damage.
• Make sure the player's output is not connected to the
amplifier's phono (turntable) inputs.
• Check your amplifier/receiver’s settings (volume, input
function, speaker settings, etc.).
76
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
09
Problem
Cause / Remedy
• Make sure that the Digital Out setting is set to On (page 53).
The analog audio is OK, but
there appears to be no digital • Check that the Dolby Digital, DTS and MPEG out settings
audio signal.
(pages 53-54) are suitable for your amplifier/receiver—check the
instruction manual that came with your amplifier/receiver.
• SACDs and some DVD-Audio discs do not output digital audio.
Listen through the player’s analog audio outputs.
Noticeable difference in DVD • This is due to differences in the audio format and is not a
and CD volume.
malfunction.
Cannot play multi-channel
audio.
•Make sure that Audio Output Mode is set to 5.1 Channel
(page 64).
•Check that the Dolby Digital, DTS and MPEG Out settings
(pages 53-54) are suitable for your amplifier/receiver—check the
instruction manual that came with your amplifier/receiver.
• DVD-Audio and SACDs do not output multichannel digital
audio. Listen through the player’s analog outputs.
• Check that the settings in the Speaker Installation screen are
correct (page 64).
• Check the audio options available from the disc menu.
Cannot listen to high-sampling • Make sure that Linear PCM Out is set to Down Sample Off
rate audio through the digital (page 54).
output.
• As a copy-protection measure, some DVDs do not output 96kHz
audio. In this case, even if set to Down Sample Off, the player
automatically outputs the audio at 48 kHz. This is not a malfunc-
tion.
Cannot output 192kHz or
176.4kHz digital audio.
• The player does not output digital audio at these sampling
rates. The digital output is automatically downsampled.
Cannot output 96kHz or
88.2kHz digital audio.
• Check that Linear PCM Out is set to Down Sample Off (page
54).
• Some discs are digital copy protected and do not output high
sampling rate digital audio. In this case the output is automati-
cally downsampled.
No DTS audio output.
• If this unit is connected to a non-DTS compatible amplifier or
decoder using a digital audio cable, set DTS Out to DTS 3 PCM.
If you do not do this, noise will be output when you play a DTS
disc.
• If this unit is connected to a DTS-compatible amplifier or
decoder using a digital audio cable, check the amplifier settings,
and that the cable is properly connected.
77
En
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Additional Information
Problem
Cause / Remedy
Audio mix does not sound
right or sounds incomplete
(for example, inaudible ).
• Make sure that Audio Output Mode is set to 2 Channel if
you've connected to the stereo inputs on your amplifier or TV
(page 62).
Disc containing the MP3 tracks • This player is compatible with multi-session discs, but only
won’t play.
plays sessions that are closed.
• If the message UNPLAYABLE MP3 FORMAT is displayed when
you try to play a disc/track, check the audio file formats. For more
information see pages 10-11.
Can’t hear effect of
TruSurround.
• TruSurround does not work with CD, MP3, DVD-Audio, SACD or
96kHz linear PCM DVD.
• The TruSurround effect is only output through the AUDIO OUT
(2ch) analog audio outputs.
• Make sure that Audio Output Mode is set to 2 Channel
(page 64).
• The effectiveness of TruSurround varies with the disc.
• Static electricity or other external
influences may cause malfunctioning of
this unit. In this case, unplug the power
cord and then plug back in. This will
usually reset the unit for proper
operation. If this does not correct the
problem, please consult your nearest
Pioneer service center.
78
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Specifications
09
Digital audio characteristics
General
Frequency response
System .............................................. DVD Player
Power requirements ................. AC 120 V, 60 Hz
Power consumption .................................... 13 W
Power consumption (standby) ..................... 0.3 W
Weight ....................................... 2.6 kg (5lb 12oz)
Dimensions ....... 420 (W) x 69 (H) x 278 (D) mm
(16 9/16 (W) x 2 3/4 (H) x 11 (D) in.)
........................... 4 Hz to 44 kHz(DVD fs: 96 kHz)
............. 4 Hz to 88 kHz (DVD-Audio fs: 192 kHz)
S/N ratio .................................................... 118 dB
Dynamic range ......................................... 108 dB
Total harmonic distortion .......................0.001 %
Wow and flutter .............. Limit of measurement
(0.001% W. PEAK) or lower
Operating temperature .............. +5°C to +35°C
(+36°F to +96°F)
Operating humidity ............................ 5% to 85%
(no condensation)
Digital output
Optical digital output ........... Optical digital jack
Coaxial digital output ........................... RCA jack
Component Video output (Y, PB, PR
)
Other terminals
Control in ....................................Minijack (3.5 ø)
Control out .................................. Minijack (3.5 ø)
Output level ............................. Y: 1.0 Vp-p (75 Ω)
B
R
P , P : 0.7 Vp-p (75 Ω)
Jacks ................................................... RCA jacks
Accessories
S-Video output
Stereo audio cable ............................................. 1
Video cable ......................................................... 1
Power cable ........................................................ 1
Remote control ................................................... 1
AA/R6P dry cell batteries .................................. 2
Operating Instructions ...................................... 1
Warranty card ..................................................... 1
Y (luminance) - Output level .......... 1 Vp-p (75 Ω)
C (color) - Output level ........... 286 mVp-p (75 Ω)
Jack .................................................. S-Video jack
Video output
Output level .................................... 1 Vp-p (75 Ω)
Jack ....................................................... RCA jack
Audio output (1 stereo pair)
Output level ....................... During audio output
200 mVrms (1 kHz, –20 dB)
Number of channels .......................................... 2
Jacks ..................................................... RCA jack
• The specifications and design of this
product are subject to change without
notice, due to improvement.
Audio output (multi-channel / L, R, C,
SW, LS, RS)
Output level ....................... During audio output
200 mVrms (1 kHz, –20 dB)
Number of channels .......................................... 6
Jacks ..................................................... RCA jack
79
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Published by Pioneer Corporation.
Copyright © 2002 Pioneer Corporation.
All rights reserved.
<TPTZW/02E00001>
Printed in
<VRB1297-B>
Download from Www.Somanuals.com. All Manuals Search And Download.
|