Operation Manual
CD RDS RECEIVER
DEH-7300BT
English
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Before You Start
01
Demo mode
Important
!
Failure to connect the red lead (ACC) of this
unit to a terminal coupled with ignition switch
on/off operations may lead to battery drain.
Remember that if the feature demo continues
operating when the car engine is turned off, it
may drain battery power.
!
The demo automatically starts when the igni-
tion switch is set to ACC or ON while the unit
is turned off. Turning off the unit does not can-
cel demo mode. To cancel the demo mode, op-
erate the function in the initial setting menu.
Operating the demo while the ignition switch
is set to ACC may drain battery power.
3
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
Head unit
Operation is the same as when using the but-
tons on the head unit.
1 2 3 4
5
6
f
g
a
h
7
l
78 9 a
b
c
d e
k
1
j
Part
Part
i
(phone/on
hook)
1
S (SRC/OFF)
8
(Back/display/
scroll)
2
3
4
5
6
7
h (eject)
9
a
b
c
d
e
Part
Operation
(list)
a/b/c/d
TA/NEWS
1 to 6
Press to increase or decrease vo-
lume.
f
VOLUME
MULTI-CONTROL
(M.C.)
Press to mute. Press again to un-
mute.
g
h
MUTE
Disc loading slot
USB port
AUX input jack (3.5
mm stereo jack)
AUDIO
Press to select an audio function.
Press to select different displays.
B (BAND/ESC)
Detach button
i
j
DISP/SCRL Press and hold to scroll through
the text information.
CAUTION
Press to pause or resume play-
back.
e
!
Use an optional Pioneer USB cable (CD-U50E)
to connect the USB audio player/USB mem-
ory as any device connected directly to the
unit will protrude out from the unit and may
be dangerous.
Press to select functions.
Press and hold to recall the initial
setting menu when the sources
are off.
k
l
FUNCTION
Press to display the disc title,
track title, folder, or file list de-
pending on the source.
While in the operating menu,
!
Do not use unauthorized products.
LIST/
ENTER
press to control functions.
Optional remote control
The remote control CD-R320 is sold separately.
4
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
Display indication
Indicator
State
Random play is on.
1
(ran-
dom/shuf-
fle)
The iPod source is selected and
the shuffle or shuffle all function
is on.
c
(auto
answer)
Shows when the automatic an-
swering function is on.
d
e
23
6 89ab d
4 5
f
(Blue-
tooth indi-
cator)
e
7
c
Connected to a Bluetooth device.
Indicator
State
The sound retriever function is
on.
f
(sound re-
triever)
!
!
Tuner: band and frequency
RDS: program service name,
PTY information and other lit-
eral information
Main dis-
play sec-
tion
1
!
Built-in CD, USB storage de-
vice and iPod: elapsed play-
back time and text
Basic Operations
information
Important
An upper tier of the folder or
menu exists.
2
3
c
d
!
!
!
!
Handle gently when removing or attaching
the front panel.
Avoid subjecting the front panel to excessive
shock.
Keep the front panel out of direct sunlight and
high temperatures.
To avoid damaging the device or vehicle inter-
ior, remove any cables and devices attached
to the front panel before detaching it.
A lower tier of the folder or menu
exists.
This flashes when a song/album
related to the song currently play-
ing is selected from the iPod.
The list function is being oper-
ated.
4
5
(list)
The disc (track) artist name is dis-
played.
(artist)
Artist search refinement of the
iPod browsing function is in use.
The disc (album) name is dis-
played.
Album search refinement of the
iPod browsing function is in use.
6
7
(disc)
The track (song) name is dis-
played.
A playable audio file has been se-
lected during operation of the list.
Song search refinement of the
iPod browsing function is in use.
(song)
8
9
a
b
LOC
(TA)
(TP)
Local seek tuning is on.
TA function is on.
A TP station is tuned in.
(repeat) Track or folder repeat is on.
5
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
Note
Removing the front panel to protect your unit from
theft
When this unit’s blue/white lead is connected to
the vehicle’s auto-antenna relay control terminal,
the vehicle’s antenna extends when this unit’s
source is turned on. To retract the antenna, turn
the source off.
1
Press the detach button to release the front
panel.
Push the front panel upward and pull it toward
you.
2
Using Bluetooth telephone
Important
!
Since this unit is on standby to connect with
your cellular phone via Bluetooth wireless
technology, using it without the engine run-
ning can drain the battery power.
Operations may vary depending on the kind of
cellular phone.
Advanced operations that require attention
such as dialing numbers on the monitor,
using the phone book, etc., are prohibited
while driving. Park your vehicle in a safe place
when using these advanced operations.
3
Always keep the detached front panel in a protec-
tion device such as a protection case.
Re-attaching the front panel
1
Slide the front panel to the left.
Make sure to insert the tabs on the left side of the
head unit into the slots on the front panel.
!
!
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone.
2
Press the right side of the front panel until it is
firmly seated.
If you cannot attach the front panel to the head
unit successfully, make sure that you are placing
the front panel onto the head unit correctly. For-
cing the front panel into place may result in da-
mage to the front panel or head unit.
1
Connection
Operate the Bluetooth telephone connection
Turning the unit on
Press S (SRC/OFF) to turn the unit on.
1
2
Function settings
Operate the Bluetooth telephone function menu.
Turning the unit off
1
Press and hold S (SRC/OFF) until the unit turns
off.
Selecting a source
1
Press S (SRC/OFF) to cycle between:
TUNER (tuner)—CD (built-in CD player)—USB
(USB)/iPod (iPod)—AUX (AUX)
Basic Operations
Making a phone call
1
Adjusting the volume
1
Turn M.C. to adjust the volume.
Answering an incoming call
1
When a call is received, press M.C.
Ending a call
CAUTION
For safety reasons, park your vehicle when remov-
ing the front panel.
1
Press
.
6
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
Tuner
Rejecting an incoming call
1
When a call is received, press
.
Basic Operations
Answering a call waiting
1
When a call is received, press M.C.
Selecting a band
1
Press B (BAND/ESC) until the desired band (F1,
F2, F3 for FM or MW/LW) is displayed.
Switching between callers on hold
1
Press M.C.
Manual tuning (step by step)
Press c or d.
Canceling call waiting
1
1
Press
.
Seeking
Press and hold c or d, and then release.
Adjusting the other party’s listening volume
1
1
Press a or b while talking on the phone.
You can cancel seek tuning by briefly pressing c
or d.
While pressing and holding c or d, you can skip
stations. Seek tuning starts as soon as you re-
lease c or d.
Turning private mode on or off.
1
Press B (BAND/ESC) while talking on the phone.
Switching the information display
1
Press
while talking on the phone.
!
Press and hold to scroll.
Note
This unit’s AF (alternative frequencies search)
function can be turned on and off. AF should be
off for normal tuning operation (refer to page 9).
Notes
!
If private mode is selected on the cellular
phone, hands-free phoning may not be avail-
able.
!
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Storing and recalling stations
for each band
Using preset tuning buttons
1
When you find a station that you want
Menu operations identical
for function settings/audio
adjustments/initial
to store in memory, press one of the preset
tuning buttons (1 to 6) and hold until the
preset number stops flashing.
2
Press one of the preset tuning buttons
(1 to 6) to select the desired station.
You can also recall stored radio stations by
settings/lists
Returning to the previous display
Returning to the previous list (the folder one level
higher)
#
pressing a or b during the frequency display.
1
Press
.
Returning to the main menu
Returning to the top tier of list
Switching the RDS display
RDS (radio data system) contains digital infor-
mation that helps search for the radio sta-
tions.
1
Press and hold
.
Returning to the ordinary display
Canceling the initial setting menu
1
Press B (BAND/ESC).
%
Press
.
Program service name—PTY information—
Frequency
Returning to the ordinary display from the list
1
Press B (BAND/ESC).
#
PTY information and the frequency appear on
the display for eight seconds.
7
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
PTY list
Advanced operations using
special buttons
NEWS/INFO
NEWS (News), AFFAIRS (Current affairs), INFO (Infor-
mation), SPORT (Sports), WEATHER (Weather), FI-
NANCE (Finance)
Receiving traffic announcements
Regardless of the source you are listening to, you can
receive traffic announcements automatically with TA
(traffic announcement standby).
POPULAR
1
2
3
Tune in to a TP or enhanced other network’s TP
station.
Press TA/NEWS to turn traffic announcement
standby on or off.
Use M.C. to adjust the TA volume when a traffic
announcement begins.
POP MUS (Popular music), ROCK MUS (Rock
music), EASY MUS (Easy listening), OTH MUS
(Other music), JAZZ (Jazz), COUNTRY (Country
music), NAT MUS (National music), OLDIES (Oldies
music), FOLK MUS (Folk music)
The newly set volume is stored in the memory
and will be recalled for subsequent traffic an-
nouncements.
Press TA/NEWS while a traffic announcement is
being received to cancel the announcement.
The tuner returns to the original source but re-
mains in the standby mode until TA/NEWS is
pressed again.
CLASSICS
L. CLASS (Light classical), CLASSIC (Classical)
4
OTHERS
EDUCATE (Education), DRAMA (Drama), CULTURE
(Culture), SCIENCE (Science), VARIED (Varied), CHIL-
DREN (Children’s), SOCIAL (Social affairs), RELIGION
(Religion), PHONE IN (Phone in), TOURING (Travel),
LEISURE (Leisure), DOCUMENT (Documentaries)
Using news program interruption
When a news program is broadcast from a PTY code
news station, the unit automatically switches to the
news broadcast station. When the news program
ends, reception of the previous program resumes.
1
Press and hold TA/NEWS to turn news program
interruption on or off.
A news program can be canceled by pressing TA/
NEWS.
Function settings
1
Press M.C. to display the main menu.
2
Turn M.C. to change the menu option
and press to select FUNCTION.
Turn M.C. to select the function.
3
After selecting, perform the following proce-
dures to set the function.
#
If MW/LW band is selected, only BSM or
LOCAL is available.
BSM (best stations memory)
BSM (best stations memory) automatically stores the
six strongest stations in the order of their signal
strength.
1
Press M.C. to turn BSM on.
To cancel, press M.C. again.
REGION (regional)
8
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
CD/CD-R/CD-RW and USB
storage devices
Basic Operations
When AF is used, the regional function limits the se-
lection of stations to those broadcasting regional pro-
grams.
1
Press M.C. to turn the regional function on or off.
LOCAL (local seek tuning)
Playing a CD/CD-R/CD-RW
Local seek tuning lets you tune in to only those radio
stations with sufficiently strong signals for good re-
ception.
1
Insert the disc into the disc loading slot with the
label side up.
1
2
Press M.C. to display the setting mode.
Turn M.C. to select the desired setting.
FM: OFF—LEVEL 1—LEVEL 2—LEVEL 3—LEVEL
4
MW/LW: OFF—LEVEL 1—LEVEL 2
The highest level setting allows reception of only
the strongest stations, while lower levels allow the
reception of weaker stations.
Ejecting a CD/CD-R/CD-RW
Press h.
1
Playing songs on a USB storage device
1
Open the USB connector cover and plug in the
USB storage device using a USB cable.
Stopping playback of files on a USB storage device
1
You may disconnect the USB storage device at
any time.
3
Press M.C. to confirm the selection.
PTY SEARCH (program type selection)
Selecting a folder
Press a or b.
1
You can tune in to a station using PTY (program type)
information.
Selecting a track
Press c or d.
1
2
Press M.C. to display the setting mode.
Turn M.C. to select the desired setting.
NEWS/INFO—POPULAR—CLASSICS—OTHERS
Press M.C. to begin the search.
1
Fast forwarding or reversing
1
!
Press and hold c or d.
When playing compressed audio, there is no
sound during fast forward or reverse.
3
The unit searches for a station broadcasting that
type of program. When a station is found, its pro-
gram service name is displayed.
For PTY (program type ID code) information, refer
Returning to root folder
Press and hold B (BAND/ESC).
1
The program of some stations may differ from
that indicated by the transmitted PTY.
If no station is broadcasting the type of program
you searched for, NOT FOUND is displayed for
about two seconds and then the tuner returns to
the original station.
Switching between compressed audio and CD-DA
Press B (BAND/ESC).
1
Note
Disconnect USB storage devices from the unit
when not in use.
TA (traffic announcement standby)
Displaying text information
1
Press M.C. to turn traffic announcement standby
on or off.
Selecting the desired text information
AF (alternative frequencies search)
1
Press
.
1
Press M.C. to turn AF on or off.
Scrolling the text information to the left
1
Press and hold
.
NEWS (news program interruption)
Notes
1
Press M.C. to turn the NEWS function on or off.
!
!
Depending on the version of iTunes used to
write MP3 files to a disc or media file types, in-
compatible text stored within an audio file
may be displayed incorrectly.
Text information items that can be changed
depend on the media.
9
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
2
Turn M.C. to change the menu option
Selecting and playing files/
tracks from the name list
and press to select FUNCTION.
3
Turn M.C. to select the function.
1
Press
to switch to the file/track
After selecting, perform the following proce-
dures to set the function.
name list mode.
2
Use M.C. to select the desired file name
REPEAT (repeat play)
(or folder name).
1
2
Press M.C. to display the setting mode.
Turn M.C. to select a repeat play range.
Changing the file or folder name
1
Turn M.C.
Playing
1
When a file or track is selected, press M.C.
3
Press M.C. to confirm the selection.
Viewing a list of the files (or folders) in the selected
folder
RANDOM (random play)
1
When a folder is selected, press M.C.
1
Press M.C. to turn random play on or off.
Playing a song in the selected folder
PAUSE (pause)
1
When a folder is selected, press and hold M.C.
1
Press M.C. to pause or resume.
S.RTRV (sound retriever)
Advanced operations using
special buttons
Automatically enhances compressed audio and re-
stores rich sound.
1
2
Press M.C. to display the setting mode.
Turn M.C. to select the desired setting.
For details, refer to Enhancing compressed audio
Selecting a repeat play range
1
Press 6/
to cycle between the following:
CD/CD-R/CD-RW
!
!
!
DISC – Repeat all tracks
TRACK – Repeat the current track
FOLDER – Repeat the current folder
3
Press M.C. to confirm the selection.
USB audio player/USB memory
!
!
!
ALL – Repeat all files
TRACK – Repeat the current file
FOLDER – Repeat the current folder
Playing tracks in random order
Press 5/ to turn random play on or off.
1
Tracks in a selected repeat range are played in
random order.
Pausing playback
Press 2/PAUSE to pause or resume.
1
Enhancing compressed audio and restoring rich
sound (sound retriever)
1
Press 1/S.Rtrv to cycle between:
OFF (off)—1—2
1 is effective for low compression rates, and 2 is
effective for high compression rates.
Function settings
1
Press M.C. to display the main menu.
10
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
iPod
02
Playing a song in the selected category
When a category is selected, press and hold M.C.
1
Basic Operations
Searching the list by alphabet
1
When a list for the selected category is displayed,
press to switch to alphabet search mode.
Turn M.C. to select a letter.
Playing songs on an iPod
1
Open the USB connector cover.
Connect an iPod to the USB cable using an iPod
Dock Connector.
2
3
2
Press M.C. to display the alphabetical list.
Selecting a track (chapter)
Press c or d.
1
Advanced operations using
special buttons
Fast forwarding or reversing
Press and hold c or d.
1
Selecting a repeat play range
Notes
1
Press 6/
to cycle between the following:
!
!
!
The iPod cannot be turned on or off when the
!
!
ONE – Repeat the current song
ALL – Repeat all songs in the selected list
control mode is set to CTRL AUDIO.
Disconnect headphones from the iPod before
connecting it to this unit.
The iPod will turn off about two minutes after
the ignition switch is set to OFF.
Playing all songs in random order (shuffle all)
1
Press 5/
to turn shuffle all on.
!
When the control mode is set to CTRL iPod/CTRL
APP, shuffle play is on.
Pausing playback
Press 2/PAUSE to pause or resume.
1
Displaying text information
Playing songs related to the currently playing song
You can play songs from the following lists.
• Album list of the currently playing artist
• Song list of the currently playing album
• Album list of the currently playing genre
Selecting the desired text information
1
Press
.
Scrolling the text information to the left
1
Press and hold
.
1
Press and hold M.C. to switch to link play mode.
2
Turn M.C. to change the mode; press to select.
!
!
!
ARTIST – Plays an album of the artist cur-
rently being played.
ALBUM – Plays a song from the album cur-
rently being played.
GENRE – Plays an album from the genre cur-
rently being played.
Browsing for a song
1
Press
to switch to the top menu of
list search.
The selected song/album will be played after the
currently playing song.
2
Use M.C. to select a category/song.
The selected song/album may be canceled if you op-
erate functions other than link search (e.g. fast for-
ward and reverse).
Depending on the song selected to play, the end of
the currently playing song and the beginning of the
selected song/album may be cut off.
Changing the name of the song or category
1
Turn M.C.
Playlists—artists—albums—songs—podcasts—
genres—composers—audiobooks
Playing
1
When a song is selected, press M.C.
Viewing a list of songs in the selected category
1
When a category is selected, press M.C.
11
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
Operating this unit’s iPod function from your iPod
You can listen to the sound from your iPod applica-
tions using your car's speakers, when CTRL APP is se-
lected.
SHUFFLE (shuffle)
1
2
Press M.C. to display the setting mode.
Turn M.C. to select your favorite setting.
This function is not compatible with the following
iPod models.
!
!
!
SONGS – Play back songs in the selected list
in random order.
ALBUMS – Play back songs from a randomly
selected album in order.
!
!
iPod nano 1st generation
iPod 5th generation
APP mode is compatible with the following iPod
models.
OFF – Cancel random play.
3
Press M.C. to confirm the selection.
!
!
!
!
iPhone 3GS (software version 4.0 or later)
iPhone 3G (software version 4.0 or later)
iPhone (software version 3.0 or later)
iPod touch 3rd generation (software version 4.0 or
later)
SHUFFLE ALL (shuffle all)
1
Press M.C. to turn shuffle all on.
To turn off, set SHUFFLE in the FUNCTION menu
to off.
!
iPod touch 2nd generation (software version 4.0
or later)
LINK PLAY (link play)
!
iPod touch 1st generation (software version 3.1.3
or later)
1
2
Press M.C. to display the setting mode.
Turn M.C. to change the mode; press to select.
For details about the settings, refer to Playing
1
Press 4/iPod to switch the control mode.
!
!
!
CTRL iPod – This unit’s iPod function can be
operated from the connected iPod.
CTRL APP – Play back the sound from your
iPod applications.
CTRL AUDIO – This unit’s iPod function can
be operated from this unit.
PAUSE (pause)
1
Press M.C. to pause or resume.
Enhancing compressed audio and restoring rich
sound (sound retriever)
AUDIO BOOK (audiobook speed)
1
Press 1/S.Rtrv to cycle between:
OFF (off)—1—2
1
2
Press M.C. to display the setting mode.
Turn M.C. to select your favorite setting.
1 is effective for low compression rates, and 2 is
effective for high compression rates.
!
FASTER – Playback at a speed faster than nor-
mal
!
!
NORMAL – Playback at normal speed
SLOWER – Playback at a speed slower than
normal
Function settings
3
Press M.C. to confirm the selection.
1
Press M.C. to display the main menu.
S.RTRV (sound retriever)
2
Turn M.C. to change the menu option
Automatically enhances compressed audio and re-
stores rich sound.
and press to select FUNCTION.
Turn M.C. to select the function.
1
Press M.C. to display the setting mode.
Turn M.C. to select the desired setting.
For details, refer to Enhancing compressed audio
3
2
After selecting, perform the following proce-
dures to set the function.
REPEAT (repeat play)
3
Press M.C. to confirm the selection.
1
2
Press M.C. to display the setting mode.
Turn M.C. to select a repeat play range.
Notes
Switching the control mode to CTRL iPod
pauses song playback. Operate the iPod to re-
sume playback.
!
3
Press M.C. to confirm the selection.
12
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
!
The following functions are still accessible
from the unit even if the control mode is set to
CTRL iPod/CTRL APP.
— Pausing
— Fast forward/reverse
1
2
Press M.C. to display the setting mode.
Turn M.C. to select the name of a device you want
to delete.
!
Press and hold M.C. to switch the BD address
and device name.
3
4
Press M.C. to display DELETE YES.
Press M.C. to delete a cellular phone information
from the device list.
While this function is in use, do not turn off the
engine.
— Track up/down
— Repeat play (ONE/ALL/OFF)
— Random play (shuffle)
!
—
(list) to use iPod menu
— a to turn the iPod click wheel to the left
— b to turn the iPod click wheel to the right
When the control mode is set to CTRL iPod,
operations are limited as follows:
— The function settings are not available.
— The browse function cannot be operated
from this unit.
ADD DEVICE (connecting a new cellular phone)
!
1
2
Press M.C. to start searching.
To cancel, press M.C. while searching.
Turn M.C. to select a device from the device list.
!
!
If the desired device is not displayed, select
RE-SEARCH.
Press and hold M.C. to switch the BD address
and device name.
Press M.C. to connect the selected cellular
phone.
3
4
Bluetooth Telephone
Connection menu operation
!
!
!
To complete the connection, check the device
name (DEH-7300BT) and enter the link code
on your cellular phone.
PIN code is set to 0000 as the default. You
If five devices are already paired, DEVICEFULL
is displayed and it is not possible to perform
this operation. In this case, delete a paired de-
vice first.
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this op-
eration.
1
Press and hold
nection menu.
to display the con-
#
You cannot operate this step during a call.
SPCL. DEV. (setting a special device)
Bluetooth devices that are difficult to establish a con-
nection with are called special devices. If your Blue-
tooth device is listed as a special device, select the
appropriate one.
2
Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
1
Press M.C. to display the setting mode.
Use M.C. to select a special device.
DEVICELIST (connecting or disconnecting a cellular
2
phone from the device list)
Turn to change the menu option. Press to select.
!
If five devices are already paired, DEVICEFULL
is displayed and it is not possible to perform
this operation. In this case, delete a paired de-
vice first.
1
2
Press M.C. to display the setting mode.
Turn M.C. to select the name of a device you want
to connect/disconnect.
!
Press and hold M.C. to switch the BD address
3
4
Turn M.C. to display this unit’s device name, BD
address and pincode.
Use a cellular phone to connect to this unit.
and device name.
Press M.C. to connect/disconnect the selected
cellular phone.
If the connection is established, * is indicated on
the device name.
3
!
To complete the connection, check the device
name (DEH-7300BT) and enter the link code
on your cellular phone.
DEL DEVICE (deleting a cellular phone from the de-
vice list)
!
PIN code is set to 0000 as the default. You
13
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
A. CONN (connecting to a Bluetooth device automati-
cally)
MISSED (missed call history)
DIALED (dialed call history)
RECENT (received call history)
1
Press M.C. to turn automatic connection on or
1
2
3
4
Press M.C. to display the phone number list.
Turn M.C. to select a name or phone number.
Press M.C. to make a call.
When you find a phone number that you want to
store in memory, press and hold one of the preset
tuning buttons (1 to 6).
off.
VISIBLE (setting the visibility of this unit)
To check the availability of this unit from other de-
vices, Bluetooth visibility of this unit can be turned
on.
!
Press one of preset buttons 1 to 6 to recall the
1
Press M.C. to turn the visibility of this unit on or
desired preset number.
off.
!
While setting SPCL. DEV., Bluetooth visibility
of this unit is turned on temporarily.
PHONE BOOK (phone book)
!
!
The phone book in your cellular phone will be
transferred automatically when the phone is con-
nected to this unit.
Depending on the cellular phone, the phone book
may not be transferred automatically. In this case,
operate your cellular phone to transfer the phone
book. The visibility of this unit should be on. Refer
PIN CODE (PIN code input)
To connect your cellular phone to this unit via Blue-
tooth wireless technology, you need to enter a PIN
code on your phone to verify the connection. The de-
fault code is 0000, but you can change it with this
function.
1
2
3
4
Press M.C. to display the setting mode.
Press a or b to select a number.
Press d to move the cursor to the next position.
After inputting PIN code, press and hold M.C.
The PIN code can be stored in the memory.
1
2
Press M.C. to display SEARCH (alphabetical list).
Turn M.C. to select the first letter of the name you
are looking for.
!
After inputting 8 digits PIN code, press d to
store in memory.
!
Press and hold M.C. to select the desired
character type.
!
After inputting, pressing M.C. returns you to
the PIN code input display, and you can
change the PIN code.
3
4
5
6
Press M.C. to display a registered name list.
Turn M.C. to select the name you are looking for.
Press M.C. to display the phone number list.
Turn M.C. to select a phone number you want to
call.
DEV. INFO (BD (Bluetooth device) address display)
1
2
Press M.C. to display the setting mode.
Turn M.C. left to switch to the BD address.
Turning M.C. right returns to the device name.
!
When you find a phone number that you want
to store in memory, press and hold one of the
preset tuning buttons (1 to 6).
!
Press one of preset buttons 1 to 6 to recall the
desired preset number.
7
Press M.C. to make a call.
Phone menu operation
PRESET (preset phone numbers)
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this op-
eration.
1
2
Press M.C. to display the setting mode.
Use M.C. to select the desired preset number.
Turn to change the menu option. Press to select.
!
You can also press one of the preset number
buttons 1 to 6 to select a number.
Press M.C. to make a call.
1
2
Press
to display the phone menu.
3
Turn M.C. to select the function.
PHONE FUNC (phone function)
After selecting, perform the following proce-
dures to set the function.
You can set A. ANSR and R.TONE from this menu.
14
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
Function and operation
02
TONE CTRL (equalizer adjustment)
1
Display PHONE FUNC.
!
Adjusted equalizer curve settings are stored in
CUSTOM.
Press M.C. to display the setting mode.
Press M.C. to select BASS (bass)/MID (mid)/TRE-
BLE (treble).
1
2
2
Press M.C. to display the function
menu.
3
Turn M.C. to adjust the level.
Adjustment range: +6 to -6
3
Turn M.C. to select the function.
LOUDNESS (loudness)
After selecting, perform the following proce-
dures to set the function.
Loudness compensates for deficiencies in the low-
and high-frequency ranges at low volume.
1
Press M.C. to display the setting mode.
Turn M.C. to select the desired setting.
OFF (off)—LOW(low)—HIGH (high)
Press M.C. to confirm the selection.
A. ANSR (automatic answering)
2
1
Press M.C. to turn automatic answering on or off.
3
R.TONE (ring tone select)
SUBWOOFER1 (subwoofer on/off setting)
1
Press M.C. to turn the ring tone on or off.
This unit is equipped with a subwoofer output which
can be turned on or off.
1
Press M.C. to display the setting mode.
Turn M.C. to select the desired setting.
NORMAL (normal phase)—REVERSE (reverse
phase)—OFF (subwoofer off)
2
Audio Adjustments
3
Press M.C. to confirm the selection.
1
Press M.C. to display the main menu.
SUBWOOFER2 (subwoofer adjustment)
2
Turn M.C. to change the menu option
The cut-off frequency and output level can be ad-
justed when the subwoofer output is on.
Only frequencies lower than those in the selected
range are outputted from the subwoofer.
and press to select AUDIO.
Turn M.C. to select the audio function.
3
1
Press M.C. to display the setting mode.
Press M.C. to cycle between the cut-off frequency
and output level of the subwoofer.
Cut-off frequency (Cut-off frequency display
flashes.)—Output level (Output level display
flashes.)
After selecting, perform the following proce-
dures to set the audio function.
2
FAD/BAL (fader/balance adjustment)
1
2
Press M.C. to display the setting mode.
Press M.C. to cycle between fader (front/rear) and
balance (left/right).
Turn M.C. to adjust speaker balance.
When the rear output and RCA output setting are
SW, you cannot adjust front/rear speaker balance.
3
Turn M.C. to select the desired setting.
Cut-off frequency: 50HZ—63HZ—80HZ—100HZ
—125HZ
3
Output level: -24 to +6
!
EQUALIZER (equalizer recall)
1
2
Press M.C. to display the setting mode.
Turn M.C. to select the equalizer.
DYNAMIC—VOCAL—NATURAL—CUSTOM—
FLAT—POWERFUL
3
Press M.C. to confirm the selection.
15
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
02
Operating this unit
SLA (source level adjustment)
AUTO-PI (auto PI seek)
SLA (Source Level Adjustment) lets you adjust the vo-
lume level of each source to prevent radical changes
in volume when switching between sources.
The unit can automatically search for a different sta-
tion with the same programming, even during preset
recall.
!
!
!
Settings are based on the FM volume level, which
remains unchanged.
The MW/LW volume level can also be adjusted
with this function.
When selecting FM as the source, you cannot
switch to SLA.
1
Press M.C. to turn Auto PI seek on or off.
AUX (auxiliary input)
Activate this setting when using an auxiliary device
connected to this unit.
1
Press M.C. to turn AUX on or off.
1
2
Press M.C. to display the setting mode.
Turn M.C. to adjust the source volume.
Adjustment range: +4 to –4
USB (plug and play)
This setting allows you to switch your source to USB/
iPod automatically.
3
Press M.C. to confirm the selection.
1
Press M.C. to turn the plug and play function on
or off.
ON – When a USB storage device/iPod is con-
nected, depending on the type of device, the
source is automatically switched to USB/iPod
when you turn on the engine. If you disconnect
your USB storage device/iPod, this unit’s source
is turned off.
OFF – When a USB storage device/iPod is con-
nected, the source is not switched to USB/iPod
automatically. Please change the source to USB/
iPod manually.
Initial Settings
Important
PW SAVE (power saving) is cancelled if the vehi-
cle battery is disconnected and will need to be
turned back on once the battery is reconnected.
When PW SAVE (power saving) is off, depending
on connection methods, the unit may continue to
draw power from the battery if your vehicle's igni-
tion doesn't have an ACC (accessory) position.
SW CONTROL (rear output setting)
The rear speaker leads output can be used for full-
range speaker or subwoofer connection.
If you switch to REAR-SP:SW, you can connect a rear
speaker lead directly to a subwoofer without using an
auxiliary amp.
1
Press and hold S (SRC/OFF) until the
unit turns off.
Initially, REAR-SP is set for rear full-range speaker
connection (FUL).
2
Press S (SRC/OFF) and hold until func-
tion name appears in the display.
1
Press M.C. to display the setting mode.
Turn M.C. to change the setting.
REAR-SP: FUL—SW
2
3
Turn M.C. to select the initial setting.
3
Press M.C. to confirm the selection.
After selecting, perform the following proce-
dures to set the initial setting.
DEMO (demo display setting)
Press M.C. to turn the demo display on or off.
FM STEP (FM tuning step)
1
Normally, the FM tuning step employed by seek tun-
ing is 50 kHz. When AF or TA is on, the tuning step
automatically changes to 100 kHz. It may be prefer-
able to set the tuning step to 50 kHz when AF is on.
SCROLL (scroll mode setting)
When ever scroll is set to ON, recorded text informa-
tion scrolls continuously in the display. Set to OFF if
you prefer the information to scroll just once.
!
The tuning step remains at 50 kHz during manual
tuning.
1
Press M.C. to turn the ever scroll on or off.
1
2
Press M.C. to display the setting mode.
Turn M.C. to select the FM tuning step.
50 KHZ (50 kHz)—100 KHZ (100 kHz)
Press M.C. to confirm the selection.
TITLE (multi-language)
3
16
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Section
Operating this unit
02
This unit can display the text information of a com-
pressed audio file even if they are embedded in a
Western European or Russian language.
S/W UPDATE (updating the software)
This function is used to update this unit with the lat-
est software. For information on the software and up-
dating, refer to our website.
!
If the embedded language and the selected lan-
guage setting are not the same, text information
may not display properly.
!
Never turn the unit off while the software is being
updated.
!
1
Some characters may not be displayed properly.
Press M.C. to display the setting mode.
Turn M.C. to select the desired setting.
EUROPEAN (European)—RUSSIAN (Russian)
Press M.C. to confirm the selection.
1
Press M.C. to display the data transfer mode.
Follow the on-screen instructions to finish updat-
ing the software.
2
3
PW SAVE (power saving)
Switching this function on enables you to reduce the
consumption of battery power.
Using an AUX source
!
Turning on the source is the only operation al-
lowed when this function is on.
1
Insert the stereo mini plug into the
AUX input jack.
1
Press M.C. to turn the power save on or off.
BT CLEAR (resetting the Bluetooth wireless technol-
ogy module)
2
Press S (SRC/OFF) to select AUX as the
source.
Bluetooth telephone data can be deleted. To protect
personal information, we recommend deleting this
data before transferring the unit to other persons. The
following settings will be deleted.
Note
AUX cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to AUX
!
!
!
phone book entries on the Bluetooth telephone
preset numbers on the Bluetooth telephone
registration assignment of the Bluetooth tele-
phone
!
!
1
call history of the Bluetooth telephone
information of the connected Bluetooth telephone
Press M.C. to show the confirmation display.
YES is displayed. Clearing memory is now on
standby.
If you do not want to reset phone memory, press
. The display reverts.
2
Press M.C. to clear the memory.
CLEARED is displayed and the settings are de-
leted.
!
While this function is in use, do not turn off
the engine.
VER INFO (Bluetooth version display)
You can display the system versions of this unit and
of Bluetooth module.
1
Press M.C. to display the information.
17
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
Built-in CD Player
Message Cause
Troubleshooting
Action
Symptom
Cause
Action
ERROR-11, 12, The disc is dirty. Clean the disc.
17, 30
The display
automatically form any opera- again.
returns to the tion within about
ordinary dis-
play.
You did not per- Perform operation
The disc is
scratched.
Replace the disc.
ERROR-10, 11, There is an elec- Turn the ignition
12, 15, 17, 30, trical or mechan- switch OFF and
A0
30 seconds.
ical error.
back ON, or switch
to a different
source, then back
to the CD player.
The repeat play Depending on
range changes the repeat play
unexpectedly. range, the se-
lected range may
Select the repeat
play range again.
ERROR-15
ERROR-23
FRMT READ
The inserted disc Replace the disc.
is blank
change when an-
other folder or
track is being se-
lected or during
fast forwarding/
reversing.
Unsupported CD Replace the disc.
format
Sometimes there Wait until the mes-
is a delay be-
sage disappears
tween the start of and you hear
A subfolder is Subfolders can- Select another re-
playback and
when you start to
hear any sound.
sound.
not played
back.
not be played
when FOLDER
(folder repeat) is
selected.
peat play range.
NO AUDIO
The inserted disc Replace the disc.
does not contain
any playable
files.
NO XXXX ap- There is no em-
pears when a
display is chan- mation.
ged (NO TITLE,
Switch the display
bedded text infor- or play another
track/file.
SKIPPED
PROTECT
The inserted disc Replace the disc.
contains DRM
protected files.
for example).
The display is
illuminated
Demo mode is
on.
! Press
to can-
cel demo mode.
! Turn off the
demo display set-
ting.
All the files on
the inserted disc
are embedded
with DRM.
Replace the disc.
when the unit
is turned off.
The unit is mal- You are using a
functioning.
There is inter- cellular phone,
Move electrical de-
device, such as a vices that may be
USB storage device/iPod
causing the inter-
ference away from
the unit.
ference.
that transmits
electric waves
near the unit.
Message
Cause
Action
NO DEVICE
When plug and ! Turn the plug
play is off, no and play on.
USB storage de- ! Connect a com-
vice or iPod is
connected.
patible USB sto-
rage device/iPod.
FRMT READ
Sometimes there Wait until the mes-
is a delay be- sage disappears
tween the start of and you hear
Error messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to note the
error message.
playback and
sound.
when you start to
hear any sound.
18
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
Message
Cause
Action
Message
Cause
Action
NO AUDIO
There are no
songs.
Transfer the audio
files to the USB
storage device and
connect.
CHECK USB
The USB connec- Check that the
tor or USB cable USB connector or
has short-
circuited.
USB cable is not
caught in some-
thing or damaged.
The connected
Follow the USB
USB storage de- storage device in-
vice has security structions to dis-
The connected
USB storage de- USB storage de-
Disconnect the
enabled
able the security.
vice consumes
more than 500
mA (maximum
allowable cur-
rent).
vice and do not
use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect only com-
pliant USB storage
devices.
SKIPPED
The connected
USB storage de- not embedded with
Play an audio file
vice contains
files embedded
with Windows
Mediaä DRM 9/
10
Windows Media
DRM 9/10.
The iPod oper-
Make sure the con-
PROTECT
N/A USB
All the files in the Transfer audio files
USB storage de- not embedded with
ates correctly but nection cable for
does not charge the iPod has not
shorted out (e.g.,
vice are em-
bedded with
Windows Media
DRM 9/10 to the
not caught in
metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or dis-
connect the iPod
and reconnect.
Windows Media USB storage de-
DRM 9/10
vice and connect.
The connected
! Connect a USB
USB storage de- Mass Storage
vice is not sup-
ported by this
unit.
Class compliant
device.
! Disconnect your
device and replace
it with a compati-
ble USB storage
device.
ERROR-19
Communication ! Perform one of
failed.
the following op-
erations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage de-
vice.
–Change to a dif-
ferent source.
Then, return to the
USB source.
! Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, recon-
nect the iPod and
reset it.
iPod failure
Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, recon-
nect the iPod and
reset it.
19
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
Handling guidelines
Discs and player
Message
Cause
Action
ERROR-23
USB storage de- USB storage de-
vice was not for- vice should be for-
matted with
FAT12, FAT16 or FAT16 or FAT32.
FAT32
matted with FAT12,
Use only discs that feature either of the following two
logos.
ERROR-16
The iPod firm-
ware version is
old
Update the iPod
version.
iPod failure
Disconnect the
cable from the
iPod. Once the
iPod's main menu
is displayed, recon-
nect the iPod and
reset it.
Use 12-cm discs. Do not use 8-cm discs or an adapter
for 8-cm discs.
STOP
There are no
songs in the cur- contains songs.
rent list.
Select a list that
Use only conventional, fully circular discs. Do not use
shaped discs.
NOT FOUND
No related songs Transfer songs to
the iPod.
Bluetooth Telephone
Do not insert anything other than a CD into the CD
loading slot.
Message
Cause
Action
Do not use cracked, chipped, warped, or otherwise
damaged discs as they may damage the player.
ERROR-10
The power failed Turn the ignition
for the Bluetooth switch OFF and
module of this
unit.
then to ACC or ON.
If the error mes-
sage is still dis-
played after
performing the
above action,
Unfinalized CD-R/CD-RW discs cannot be played
back.
Do not touch the recorded surface of the discs.
Store discs in their cases when not in use.
please contact
your dealer or an
authorized Pioneer
Service Station.
Do not attach labels, write on or apply chemicals to
the surface of the discs.
To clean a CD, wipe the disc with a soft cloth outward
from the center.
Condensation may temporarily impair the player’s
performance. Let it rest for about one hour to adjust
to a warmer temperature. Also, wipe any damp discs
off with a soft cloth.
Playback of discs may not be possible because of
disc characteristics, disc format, recorded applica-
tion, playback environment, storage conditions, and
so on.
Road shocks may interrupt disc playback.
20
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
Frequent loading and ejecting of a DualDisc may re-
sult in scratches on the disc. Serious scratches can
lead to playback problems on this unit. In some
cases, a DualDisc may become stuck in the disc load-
ing slot and will not eject. To prevent this, we recom-
mend you refrain from using DualDisc with this unit.
Please refer to the information from the disc manu-
facturer for more detailed information about
DualDiscs.
USB storage device
Connections via USB hub are not supported.
Do not connect anything other than a USB storage
device.
Firmly secure the USB storage device when driving.
Do not let the USB storage device fall onto the floor,
where it may become jammed under the brake or ac-
celerator pedal.
Depending on the USB storage device, the following
problems may occur.
!
!
!
!
Operations may vary.
Compressed audio
compatibility (disc, USB)
WMA
The storage device may not be recognized.
Files may not be played back properly.
The device may generate noise in the radio.
iPod
File extension: .wma
Bit rate: 48 kbps to 320 kbps (CBR), 48 kbps to 384
kbps (VBR)
Do not leave the iPod in places with high tempera-
tures.
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
To ensure proper operation, connect the dock connec-
tor cable from the iPod directly to this unit.
Windows Media Audio Professional, Lossless, Voice/
DRM Stream/Stream with video: Not compatible
Firmly secure the iPod when driving. Do not let the
iPod fall onto the floor, where it may become jammed
under the brake or accelerator pedal.
MP3
About iPod settings
File extension: .mp3
!
When an iPod is connected, this unit changes the
EQ (equalizer) setting of the iPod to off in order to
optimize the acoustics. When you disconnect the
iPod, the EQ returns to the original setting.
You cannot set Repeat to off on the iPod when
using this unit. Repeat is automatically changed
to All when the iPod is connected to this unit.
Bit rate: 8 kbps to 320 kbps (CBR), VBR
Sampling frequency: 8 kHz to 48 kHz (32 kHz, 44.1
kHz, 48 kHz for emphasis)
!
Compatible ID3 tag version: 1.0, 1.1, 2.2, 2.3, 2.4 (ID3
tag Version 2.x is given priority over Version 1.x.)
Incompatible text saved on the iPod will not be dis-
played by the unit.
M3u playlist: Not compatible
MP3i (MP3 interactive), mp3 PRO: Not compatible
DualDiscs
WAV
DualDiscs are two-sided discs that have a recordable
CD for audio on one side and a recordable DVD for
video on the other.
File extension: .wav
Since the CD side of DualDiscs is not physically com-
patible with the general CD standard, it may not be
possible to play the CD side with this unit.
Quantization bits: 8 and 16 (LPCM), 4 (MS ADPCM)
Sampling frequency: 16 kHz to 48 kHz (LPCM), 22.05
kHz and 44.1 kHz (MS ADPCM)
21
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
Supplemental information
CAUTION
Only the first 32 characters can be displayed as a file
name (including the file extension) or a folder name.
Do not leave discs or a USB storage device in any
place that is subject to high temperatures.
Russian text to be displayed on this unit should be en-
coded in one of the following character sets:
!
!
Unicode (UTF-8, UTF-16)
iPod compatibility
A character set other than Unicode that is used in
a Windows environment and is set to Russian in
the multi-language setting
This unit supports only the following iPod models.
Supported iPod software versions are shown below.
Older versions may not be supported.
This unit may not operate correctly depending on the
application used to encode WMA files.
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
iPhone 3GS (software version 4.0)
iPhone 3G (software version 4.0)
iPhone (software version 3.1.3)
There may be a slight delay at the start of playback of
audio files embedded with image data or audio files
stored on a USB storage device that has numerous
folder hierarchies.
iPod nano 5th generation (software version 1.0.2)
iPod nano 4th generation (software version 1.0.4)
iPod nano 3rd generation (software version 1.1.3)
iPod nano 2nd generation (software version 1.1.3)
iPod nano 1st generation (software version 1.3.1)
iPod touch 3rd generation (software version 4.0)
iPod touch 2nd generation (software version 4.0)
iPod touch 1st generation (software version 3.1.3)
iPod classic 160GB (software version 2.0.4)
iPod classic 120GB (software version 2.0.1)
iPod classic (software version 1.1.2)
Disc
Playable folder hierarchy: up to eight tiers (A practical
hierarchy is less than two tiers.)
Playable folders: up to 99
Playable files: up to 999
iPod 5th generation (software version 1.3)
File system: ISO 9660 Level 1 and 2, Romeo, Joliet
Multi-session playback: Compatible
Packet write data transfer: Not compatible
Depending on the generation or version of the iPod,
some functions may not be available.
Operations may vary depending on the software ver-
sion of iPod.
Regardless of the length of blank sections between
the songs from the original recording, compressed
audio discs play with a short pause between songs.
When using an iPod, an iPod Dock Connector to USB
Cable is required.
A Pioneer CD-IU50 interface cable is also available.
For details, consult your dealer.
USB storage device
Playable folder hierarchy: up to eight tiers (A practical
hierarchy is less than two tiers.)
About the file/format compatibility, refer to the iPod
manuals.
Playable folders: up to 500
Audio Book, Podcast: Compatible
Playable files: up to 15 000
CAUTION
Playback of copyright-protected files: Not compatible
Pioneer accepts no responsibility for data lost on
the iPod, even if that data is lost while this unit is
used.
Partitioned USB storage device: Only the first partition
can be played.
There may be a slight delay when starting playback of
audio files on a USB storage device with numerous
folder hierarchies.
Sequence of audio files
The user cannot assign folder numbers and
specify playback sequences with this unit.
22
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
Example of a hierarchy
D: C
: Х
D: C
: Ц
D: C
: Ч
D: C
: Ш, Щ
: Ю
D: C
: Ъ
01
02
ꢀ
ꢁ
: Ы
: Ь
: Э
: Я
D: Display C: Character
03
: Folder
: Compressed
audio file
ꢂ
04
ꢃ
ꢄ
ꢅ
01 to 05: Folder
number
Bluetooth profiles
05
1 to 6: Playback
sequence
Level 1 Level 2 Level 3 Level 4
!
In order to use Bluetooth wireless technol-
ogy, devices must be able to interpret cer-
tain profiles. This unit is compatible with
the following profiles.
Disc
Folder selection sequence or other operation
may differ depending on the encoding or writ-
ing software.
— GAP (Generic Access Profile)
— SDP (Service Discovery Protocol)
— OPP (Object Push Profile)
USB storage device
— HFP (Hands Free Profile)
Playback sequence is the same as recorded
sequence in the USB storage device.
To specify the playback sequence, the follow-
ing method is recommended.
Copyright and trademark
1 Create a file name that includes numbers that
specify the playback sequence (e.g., 001xxx.
mp3 and 099yyy.mp3).
2 Put those files into a folder.
3 Save the folder containing files on the USB
storage device.
However, depending on the system environ-
ment, you may not be able to specify the play-
back sequence.
Bluetooth
The Bluetoothâ word mark and logos are regis-
tered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Pioneer
Corporation is under license. Other trade-
marks and trade names are those of their re-
spective owners.
iTunes
Apple and iTunes are trademarks of Apple
Inc., registered in the U.S. and other coun-
tries.
For USB portable audio players, the sequence
is different and depends on the player.
Russian character chart
D: C
D: C
: Б
D: C
: В
D: C
D: C
: Д
: А
: Г
: Е, Ё
: Ж
: М
: С
: З
: И, Й
: К
: Л
: Н
: Т
: О
: П
: Р
: У
: Ф
23
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
MP3
Specifications
General
Power source ............................. 14.4 V DC (10.8 V to 15.1 V
allowable)
Grounding system ................... Negative type
Maximum current consumption
..................................................... 10.0 A
Dimensions (W × H × D):
DIN
Supply of this product only conveys a license
for private, non-commercial use and does not
convey a license nor imply any right to use
this product in any commercial (i.e. revenue-
generating) real time broadcasting (terrestrial,
satellite, cable and/or any other media), broad-
casting/streaming via internet, intranets and/
or other networks or in other electronic con-
tent distribution systems, such as pay-audio or
audio-on-demand applications. An indepen-
dent license for such use is required. For de-
tails, please visit
Chassis ..................... 178 mm × 50 mm × 165
mm
Nose ........................... 188 mm × 58 mm × 17 mm
D
Chassis ..................... 178 mm × 50 mm × 165
mm
Nose ........................... 170 mm × 46 mm × 17 mm
Weight .......................................... 1.2 kg
WMA
Windows Media and the Windows logo are tra-
demarks or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
This product includes technology owned by
Microsoft Corporation and cannot be used or
distributed without a license from Microsoft
Licensing, Inc.
Audio
Maximum power output ....... 50 W × 4
Continuous power output ... 22 W × 4 (50 Hz to 15 000
Hz, 5 % THD, 4 W load, both
channels driven)
Load impedance ...................... 4 W (4 W to 8 W allowable)
Preout maximum output level
..................................................... 2.0 V
Tone controls:
Bass
iPod & iPhone
Frequency ................ 100 Hz
Gain ............................ 12 dB
Mid
Frequency ................ 1 kHz
Gain ............................ 12 dB
Treble
iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc., regis-
tered in the U.S. and other countries.
“Made for iPod” and “Made for iPhone” mean
that an electronic accessory has been de-
signed to connect specifically to iPod or
iPhone, respectively, and has been certified by
the developer to meet Apple performance
standards.
Frequency ................ 10 kHz
Gain ............................ 12 dB
Subwoofer (mono):
Frequency .......................... 50/63/80/100/125 Hz
Slope .................................... –18 dB/oct
Gain ...................................... +6 dB to –24 dB
Phase .................................. Normal/Reverse
Apple is not responsible for the operation of
this device or its compliance with safety and
regulatory standards.
CD player
System .......................................... Compact disc audio system
Usable discs .............................. Compact disc
Signal-to-noise ratio ............... 94 dB (1 kHz) (IEC-A net-
work)
Number of channels .............. 2 (stereo)
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11, 12
(2ch audio)
(Windows Media Player)
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
24
En
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Additional Information
WAV signal format .................. Linear PCM & MS ADPCM
(Non-compressed)
USB
USB standard specification
..................................................... USB 2.0 full speed
Maximum current supply .... 500 mA
USB Class ................................... MSC (Mass Storage Class)
File system .................................. FAT12, FAT16, FAT32
WMA decoding format ......... Ver. 7, 7.1, 8, 9, 10, 11, 12
(2ch audio)
(Windows Media Player)
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
WAV signal format .................. Linear PCM & MS ADPCM
(Non-compressed)
FM tuner
Frequency range ...................... 87.5 MHz to 108.0 MHz
Usable sensitivity ..................... 9 dBf (0.8 µV/75 W, mono,
S/N: 30 dB)
Signal-to-noise ratio ............... 72 dB (IEC-A network)
MW tuner
Frequency range ...................... 531 kHz to 1 602 kHz
Usable sensitivity ..................... 25 µV (S/N: 20 dB)
Signal-to-noise ratio ............... 62 dB (IEC-A network)
LW tuner
Frequency range ...................... 153 kHz to 281 kHz
Usable sensitivity ..................... 28 µV (S/N: 20 dB)
Signal-to-noise ratio ............... 62 dB (IEC-A network)
Bluetooth
Version .......................................... Bluetooth 2.0 certified
Output power ............................ +4 dBm Max.
(Power class 2)
Note
Specifications and the design are subject to mod-
ifications without notice.
25
En
Download from Www.Somanuals.com. All Manuals Search And Download.
26
En
Download from Www.Somanuals.com. All Manuals Search And Download.
27
En
Download from Www.Somanuals.com. All Manuals Search And Download.
PIONEER CORPORATION
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0031, JAPAN
PIONEER ELECTRONICS (USA) INC.
P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.
TEL: (800) 421-1404
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium/Belgique
TEL: (0) 3/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936
TEL: 65-6472-7555
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia
TEL: (03) 9586-6300
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada
TEL: 1-877-283-5901
TEL: 905-479-4411
PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.
Blvd.Manuel Avila Camacho 138 10 piso
Col.Lomas de Chapultepec, Mexico, D.F. 11000
TEL: 55-9178-4270
先鋒股份有限公司
台北市內湖區瑞光路407號8樓
電話： (02) 2657-3588
先鋒電子（香港）有限公司
香港九龍尖沙咀海港城世界商業中心
9樓901-6室
Published by Pioneer Corporation.
Copyright ã 2010 by Pioneer Corporation.
All rights reserved.
電話： (0852) 2848-6488
<KKMZX> <10I00000>
<YRB5184-A> EW
Download from Www.Somanuals.com. All Manuals Search And Download.
|