Pioneer CD Player CDJ 350 User Manual

MULTI PLAYER

CDJ-350

http://www.prodjnet.com/support/

The Pioneer website listed above provides answers to frequently asked questions, information about

software, and other up-to-date data of assistance to our customers.

http://www.prodjnet.com/rekordbox/support/

For inquiries on rekordbox, please see the support site indicated above.

Operating Instructions

Download from Www.Somanuals.com. All Manuals Search And Download.

WARNING

CAUTION

This equipment is not waterproof. To prevent a fire or

shock hazard, do not place any container filled with

liquid near this equipment (such as a vase or flower

pot) or expose it to dripping, splashing, rain or

moisture.

The  switch on this unit will not completely shut off

all power from the AC outlet. Since the power cord

serves as the main disconnect device for the unit,

you will need to unplug it from the AC outlet to shut

down all power. Therefore, make sure the unit has

been installed so that the power cord can be easily

unplugged from the AC outlet in case of an accident.

To avoid fire hazard, the power cord should also be

unplugged from the AC outlet when left unused for a

D3-4-2-1-3_A1_En

WARNING

Before plugging in for the first time, read the following

section carefully.

long period of time (for example, when on vacation).

D3-4-2-2-2a*_A1_En

The voltage of the available power supply differs

according to country or region. Be sure that the

power supply voltage of the area where this unit

will be used meets the required voltage (e.g., 230 V

NOTE

THE NO USER-SERVICEABLE PARTS

COMPARTMENT WARNING IS LOCATED ON THE

or 120 V) written on the rear panel.

D3-4-2-1-4*_A1_En

APPLIANCE BOTTOM.

D3-7-13-68_A1_En

WARNING

To prevent a fire hazard, do not place any naked flame

sources (such as a lighted candle) on the equipment.

This Class B digital apparatus complies with

D3-4-2-1-7a_A1_En

Canadian ICES-003.

D8-10-1-3_A1_En

VENTILATION CAUTION

When installing this unit, make sure to leave space

around the unit for ventilation to improve heat radiation

(at least 5 cm at rear, and 5 cm at each side).

Information to User

Alterations or modifications carried out without

appropriate authorization may invalidate the user’s

right to operate the equipment.

WARNING

D8-10-2_A1_En

Slots and openings in the cabinet are provided for

ventilation to ensure reliable operation of the product,

and to protect it from overheating. To prevent fire

hazard, the openings should never be blocked or

covered with items (such as newspapers, table-cloths,

curtains) or by operating the equipment on thick carpet

CAUTION

This product satisfies FCC regulations when shielded

cables and connectors are used to connect the unit

to other equipment. To prevent electromagnetic

interference with electric appliances such as radios

and televisions, use shielded cables and connectors

or a bed.

D3-4-2-1-7b*_A1_En

for connections.

Operating Environment

D8-10-3a_A1_En

Operating environment temperature and humidity:

+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH

(cooling vents not blocked)

IMPORTANT NOTICE

Do not install this unit in a poorly ventilated area, or in

locations exposed to high humidity or direct sunlight (or

strong artificial light)

THE MODEL NUMBER AND SERIAL NUMBER OF

THIS EQUIPMENT ARE ON THE REAR OR BOTTOM.

RECORD THESE NUMBERS ON PAGE 27 FOR

D3-4-2-1-7c*_A1_En

D36-AP9-1_A1_En_PSV

FUTURE REFERENCE.

If the AC plug of this unit does not match the AC

outlet you want to use, the plug must be removed

and appropriate one fitted. Replacement and

mounting of an AC plug on the power supply cord of

this unit should be performed only by qualified

service personnel. If connected to an AC outlet, the

cut-off plug can cause severe electrical shock. Make

sure it is properly disposed of after removal.

WARNING: Handling the cord on this product or

cords associated with accessories sold with the

product may expose you to chemicals listed on

proposition 65 known to the State of California and

other governmental entities to cause cancer and

birth defect or other reproductive harm.

Wash hands after handling.

D36-P5_B1_En

The equipment should be disconnected by removing

the mains plug from the wall socket when left unused

for a long period of time (for example, when on

When using this product, confirm the safety

vacation).

information shown on the bottom of the unit.

D3-4-2-2-1a_A1_En

D3-4-2-2-4_B1_En

Download from Www.Somanuals.com. All Manuals Search And Download.

POWER-CORD CAUTION

CAUTION

Handle the power cord by the plug. Do not pull out the

plug by tugging the cord and never touch the power

cord when your hands are wet as this could cause a

short circuit or electric shock. Do not place the unit, a

piece of furniture, etc., on the power cord, or pinch the

cord. Never make a knot in the cord or tie it with other

cords. The power cords should be routed such that they

are not likely to be stepped on. A damaged power cord

can cause a fire or give you an electrical shock. Check

the power cord once in a while. When you find it

damaged, ask your nearest PIONEER authorized

This product is a class 1 laser product classified

under the Safety of laser products, IEC 60825-1:2007.

CLASS 1 LASER PRODUCT

D58-5-2-2a_A1_En

service center or your dealer for a replacement.

S002*_A1_En

FEDERAL COMMUNICATIONS COMMISSION DECLARATION OF CONFORMITY

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Product Name: MULTI PLAYER

Model Number: CDJ-350

Responsible Party Name: PIONEER ELECTRONICS (USA) INC.

SERVICE SUPPORT DIVISION

Address: 1925 E. DOMINGUEZ ST. LONG BEACH, CA 90810-1003, U.S.A.

Phone: 1-800-421-1404

URL: http://www.pioneerelectronics.com

D8-10-4*_C1_En

We Want You Listening For A Lifetime

Used wisely, your new sound equipment will

provide a lifetime of fun and enjoyment. Since

hearing damage from loud noise is often

undetectable until it is too late, this manufacturer

and the Electronic Industries Association’s

Consumer Electronics Group recommend you avoid

prolonged exposure to excessive noise. This list of

sound levels is included for your protection.

Selecting fine audio equipment such as the unit

you’ve just purchased is only the start of your

musical enjoyment. Now it’s time to consider how

you can maximize the fun and excitement your

equipment offers. This manufacturer and the

Electronic Industries Association’s Consumer

Electronics Group want you to get the most out of

your equipment by playing it at a safe level. One that

lets the sound come through loud and clear without

annoying blaring or distortion-and, most importantly,

without affecting your sensitive hearing.

Decibel

Level Example

30 Quiet library, soft whispers

40 Living room, refrigerator, bedroom away from traffic

50 Light traffic, normal conversation, quiet office

60 Air conditioner at 20 feet, sewing machine

70 Vacuum cleaner, hair dryer, noisy restaurant

80 Average city traffic, garbage disposals, alarm clock

at two feet.

Sound can be deceiving. Over time your hearing

“comfort level” adapts to higher volumes of sound.

So what sounds “normal” can actually be loud and

harmful to your hearing. Guard against this by

setting your equipment at a safe level BEFORE your

hearing adapts.

THE FOLLOWING NOISES CAN BE DANGEROUS

UNDER CONSTANT EXPOSURE

90 Subway, motorcycle, truck traffic, lawn mower

100 Garbage truck, chain saw, pneumatic drill

120 Rock band concert in front of speakers,

thunderclap

140 Gunshot blast, jet plane

180 Rocket launching pad

To establish a safe level:

• Start your volume control at a low setting.

• Slowly increase the sound until you can hear it

comfortably and clearly, and without distortion.

Once you have established a comfortable sound

level:

• Set the dial and leave it there.

Information courtesy of the Deafness Research Foundation.

Taking a minute to do this now will help to prevent

hearing damage or loss in the future. After all, we

want you listening for a lifetime.

S001_A1_En

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

How to read this manual

The names of displays, menus, and buttons in this manual are

enclosed in brackets. (e.g. [MASTER] channel, [ON/OFF], [File] menu)

The Operating Instructions of rekordbox can be viewed from the

rekordbox [Help] menu after installing rekordbox.

Before start

Features .......................................................................................................6

System setup example................................................................................6

What’s in the box.........................................................................................6

Before you start

Supported sources......................................................................................7

Usable discs and USB devices..................................................................7

Playable music file formats........................................................................8

Functions usable in combination with a computer.................................9

About the rekordbox music management software..............................10

About the driver software (Windows)......................................................11

Connections

Names of terminals...................................................................................13

Basic style..................................................................................................13

Operations

Control panel.............................................................................................15

Front panel.................................................................................................16

Main unit display.......................................................................................16

Setting the source to be played (source select section) ........................16

Basic Operations (player, source select and browse sections)............17

Operating the jog dial ...............................................................................19

Setting loops (loop and beat loop part)...................................................19

Displaying track information (browse section) ......................................20

Searching for tracks quickly using the library information...................20

About the playback history (HISTORY)....................................................21

Using playlists ...........................................................................................21

Adjusting the playing speed (tempo control section) ............................22

Using [BPM LOCK]...................................................................................22

Operations in combination with a DJ mixer...........................................22

Using the DJ software ..............................................................................23

Changing the settings ..............................................................................23

Additional information

Troubleshooting ........................................................................................24

Error messages .........................................................................................24

List of icons displayed on the main unit display section........................25

List of MIDI Messages ..............................................................................25

Cautions on use ........................................................................................25

Handling discs ..........................................................................................25

Disclaimer..................................................................................................26

Cautions on copyrights.............................................................................26

Using the support site ..............................................................................26

Specifications............................................................................................26

Download from Www.Somanuals.com. All Manuals Search And Download.

Before start

Features

This unit is a DJ player that carries over the technology of the Pioneer CDJ series, the world standard in club players. It is a multi player for DJs

supporting a variety of sources, enabling full-fledged DJ play easily.

MULTI MEDIA, MULTI FORMAT

BEAT DISPLAY

This unit can play not only music CDs (CD-DA), but also music files

(MP3, AAC, WAV and AIFF) recorded on mass storage class USB

devices (flash memory devices and hard discs) and CD-R/-RW discs. It

can also be used as DJ software controller and audio interface.

The beat position corresponding to the track’s BPM and the playback

position are shown on the main unit display. This allows you to check

the beat visually for scratch and loop performances.

BPM LOCK

rekordbox

When the master BPM is set in advance, the playing speed of the cur-

rently playing track can be automatically set to the master BPM at the

press of a button.

Full-fledged BPM mixing is possible easily, without moving the

TEMPO slider.

rekordbox, a music management software application exclusively for

Pioneer DJ players, is included. It allows music files on a computer to

be managed in a variety of ways (analysis, setting, creation, storage

of playback history, etc.). Also, music files managed with rekordbox

can be transferred to USB devices for convenience in selecting tracks,

operating playlists and so on when the USB device is connected to

this unit.

PLAYLIST

The currently playing or selected track can be registered on the play-

list, as desired (but only for tracks managed with rekordbox).

System setup example

A DJ system like the one shown on the diagram below can be set up by combining this unit with a DJ mixer and peripheral devices.

Music management

software

For audio output

rekordbox

Component, amplifier,

powered speaker, etc.

USB device

Computer

USB device

MIC /AUX

TIME MODE

BACK

TIME MODE

BACK

MIC

AUX

PHONO

REMAIN

TEMPO

REMAIN

TEMPO

LEVEL

TRIM

LOCK

AUTO CUE

DISPLAY

AUTO CUE

DISPLAY

A.CUE

BPM

SELECT PUSH

INFO

BROWSE

USB

STOP

USB

STOP

USB

STOP

DISC

UTILITY

MASTER

CH-1 CH-2

SOURCE SELECT

BPM

LOCK

BPM

LOCK

REC

PLAY



PLAYLIST



MP3/AAC

WAV/AIFF

MP3/AAC

WAV/AIFF

LOW

MID

TRACK MARK

TRACK SEARCH

IN/CUE

OUT

RELOOP/EXIT

LOOP

BEAT LOOP

LOOP DRIVE

TRACK SEARCH

IN/CUE

OUT

RELOOP/EXIT

LOOP

BEAT LOOP

LOOP DRIVE

VINYL MODE





LOW

PREVIEW

TEMPO RANGE

MASTER TEMPO

TEMPO RANGE

MASTER TEMPO

HOT LOOP

OUT ADJUST

HOT LOOP

OUT ADJUST

MASTER LEVEL

MIC/AUX

LEVEL

TEMPO

CH-1

CH-2

HEADPHONES

MASTER EFFECT

CH-1

CUE

CH-2

CUE

GATE

JET

MIXING

CRUSH

FILTER

CUE

LEVEL

MASTER

LEVEL/DEPTH

ADER

START

PLAY/PAUSE

THRU

REV

FWD

REV

FWD

MULTI PLAYER

CHANNEL DJ MIXER

MULTI PLAYER

PHONES

CDJ-350

DJM-350

CDJ-350

For checking the

audio input/output

Disc

Headphones

What’s in the box

CD-ROM (rekordbox license key attached)

Disc force eject pin (mounted on bottom of product)

Operating instructions (this document)

Power cable

Audio cable

Control cord

Download from Www.Somanuals.com. All Manuals Search And Download.

Before you start

Supported sources

This unit supports the sources listed below.

Discs (page 7)

USB devices (page 8)

Computers (page 9)

Install the software onto the computer from the included CD-ROM.

The included CD-ROM contains the following two software programs.

— rekordbox music management software

— Driver software

Usable discs and USB devices

About discs

This unit can play the discs shown below.

ꢀ About CD-R/-RW discs

Mark ¹

Compatible formats

Music files (MP3/AAC/WAV/AIFF) recorded on CD-R/-RW discs can

be played.

Type

Max. 8 levels (files in folders beyond the 8th level cannot

Folder layers

be played)

Music CD (CD-DA)

Max. number of

1 000 folders

folders

Max. number of

1 000 files

files

When there are many folders or files, some time may be required for loading.

CD-R

Music CD (CD-DA)

MP3

AAC

WAV

AIFF

ꢀ About discs created on computers

Depending on the application settings and the computer’s environ-

mental settings, it may not be possible to play certain discs. Record

the disc in a format supported on this unit. For details, contact your

application’s retailer.

CD-RW

If the recording quality is poor due to the disc’s properties, scratches

or dirt on the disc or dirt on the recording lens, it may not be possible

to play the disc.

ꢀ Creating backup discs

CD-TEXT

Music CD (CD-DA)

When CD-R/-RW discs are paused or left in the pause mode at cue

points for long periods of time, it may become difficult to play the disc

at that point, due to the properties of the disc. Also, when a specific

point is looped repeatedly an extremely large number of times, it may

become difficult to play that point.

Discs on which the marks on this table are indicated on the disc label, pack-

age or jacket can be played.

Titles, album names and artist names recorded in the CD-Text data are

displayed. When multiple text data are recorded on the disc, the information

for the first text data is displayed.

When playing valuable discs, we recommend making backup discs.

ꢀ About Copy Control CDs and DualDiscs

This unit is designed to CD standards. Operation and performance of

discs with standards other than CD standards is not guaranteed.

ꢀ Discs that cannot be played

DTS-CD

Photo CDs

Video CDs

CD Graphics (CD-G) discs

Unfinalized CDs

DVD

ꢀ About 8 cm single CDs

8 cm single CDs cannot be played on the CDJ-350. Do not mount 8 cm

adapters on CDs and play them on the CDJ-350. The adapter could fall

off as the disc spins, damaging the disc or the player.

Download from Www.Somanuals.com. All Manuals Search And Download.

About USB devices

This unit supports USB mass storage class USB devices (external

hard disks, portable flash memory devices, digital audio players, etc.).

ꢀ Cautions on using USB devices

Some USB devices may not operate properly. Please note that

Pioneer will accept no responsibility whatsoever for loss of data

recorded on USB devices.

Folder layers

Max. 8 layers

1 000 folders

Max. number of

folders

It may happen that, when a current above the allowable level is

detected in this unit’s USB port, the [USB STOP] indicator flashes,

the power supply to the USB device is cut off and communications

with the USB device are interrupted. To restore normal operation,

disconnect the USB device from this unit. Avoid reusing USB

devices for which an excess current has been detected. If normal

operation is not restored (if communications cannot be estab-

lished) after the above procedure is performed, try turning off this

unit’s power then turning it back on.

Max. number of

files

10 000 files (1 000 files for files not managed by rekordbox)

FAT16, FAT32 and HFS+ (NTFS is not supported.)

Supported file

systems

When there are many folders or files, some time may be required for loading.

Folders and files exceeding the limits cannot be displayed.

If multiple partitions are set for the USB device, the device may not

be recognized.

ꢀ USB devices that cannot be used

USB devices equipped with flash card readers may not operate.

Depending on the USB device you are using, the desired perfor-

mance may not be achieved.

Optical disk type devices such as external DVD/CD drives, etc., are

not supported.

USB hubs cannot be used.

Playable music file formats

This unit supports music files in the formats shown below.

Compatible

formats

Encoding

method

Type

File extension

Bit depth

Bit rate

Sampling frequency

MP3

AAC

WAV

AIFF

.mp3

MPEG-1

16 bit

32 kbps to 320 kbps

32 kHz, 44.1 kHz, 48 kHz

44.1 kHz, 48 kHz

CBR, VBR

.m4a, .aac and .mp4 MPEG-4 AAC LC

16 bit

16 kbps to 320 kbps

CBR, VBR

.wav

WAV

AIFF

16 bit, 24 bit

—

Uncompressed PCM

.aif, .aiff

44.1 kHz, 48 kHz

About MP3 files

About AAC files

MP3 files can have a constant bit rate (CBR) or a variable bit rate

(VBR). Both types of files can be played on the CDJ-350, but the search

and super fast search functions are slower with VBR files. If your prior-

ity is operability, we recommend recording MP3 files in CBR.

AAC is the abbreviation of “Advanced Audio Coding”, a basic

format of audio compression technology used for MPEG-2 and

MPEG-4.

The file format and extension of AAC data depends on the applica-

tion used to create the data.

In addition to AAC files with the extension “.m4a” encoded with

iTunes®, files with the extensions “.aac” and “.mp4” can also be

played. Note, however, that copyright-protected AAC files pur-

chased for example at the iTunes Music Store cannot be played.

Also, some files may not be playable, depending on the version of

iTunes used for encoding.

Download from Www.Somanuals.com. All Manuals Search And Download.

Documentation, and any derivative works thereof. You do not

acquire any other rights, express or implied, beyond the lim-

ited license set forth in this Agreement.

No Support. Pioneer has no obligation to provide support,

maintenance, upgrades, modifications or new releases for the

Program or Documentation under this Agreement.

Functions usable in combination

with a computer

Warranty disclaimer

About the included CD-ROM

This unit can be used in combination with a computer when the soft-

ware is installed onto the computer from the included CD-ROM.

The included CD-ROM contains the following two software programs.

THE PROGRAM AND DOCUMENTATION ARE PROVIDED “AS IS”

WITHOUT ANY REPRESENTATIONS OR WARRANTIES, AND YOU

AGREE TO USE THEM AT YOUR SOLE RISK. TO THE FULLEST

EXTENT PERMISSIBLE BY LAW, PIONEER EXPRESSLY DISCLAIMS

ALL WARRANTIES OF ANY KIND WITH RESPECT TO THE

PROGRAM AND DOCUMENTATION, WHETHER EXPRESS, IMPLIED,

STATUTORY, OR ARISING OUT OF COURSE OF PERFORMANCE,

COURSE OF DEALING OR USAGE OF TRADE, INCLUDING

ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE, SATISFACTORY QUALITY, ACCURACY,

TITLE OR NON-INFRINGEMENT.

ꢀ rekordbox music management software

Music files used for DJ play can be managed. The management infor-

mation can be transferred using USB devices (page 10).

ꢀ Driver software

When operating DJ software on the computer using this unit, the

sound of the music file that is playing can be output from this unit

(page 11).

Damages and remedies for breach

You agree that any breach of this Agreement’s restrictions would

cause Pioneer irreparable harm for which money damages alone

would be inadequate. In addition to damages and any other remedies

to which Pioneer may be entitled, You agree that Pioneer may seek

injunctive relief to prevent the actual, threatened or continued breach

of this Agreement.

There is no need to install the driver software when using Mac OS X.

Software end user license agreement

Termination

This Software End User License Agreement (“Agreement”) is between

you (both the individual installing the Program and any single

legal entity for which the individual is acting) (“You” or “Your”) and

PIONEER CORPORATION (“Pioneer”).

TAKING ANY STEP TO SET UP OR INSTALL THE PROGRAM MEANS

THAT YOU ACCEPT ALL OF THE TERMS OF THIS LICENSE AGREEMENT.

PERMISSION TO DOWNLOAD AND/OR USE THE PROGRAM IS

EXPRESSLY CONDITIONED ON YOUR FOLLOWING THESE TERMS.

WRITTEN OR ELECTRONIC APPROVAL IS NOT REQUIRED TO MAKE

THIS AGREEMENT VALID AND ENFORCEABLE. IF YOU DO NOT

AGREE TO ALL OF THE TERMS OF THIS AGREEMENT, YOU ARE NOT

AUTHORIZED TO USE THE PROGRAM AND MUST STOP INSTALLING IT

OR UNINSTALL IT, AS APPLICABLE.

Pioneer may terminate this Agreement at any time upon Your breach

of any provision. If this Agreement is terminated, You will stop using

the Program, permanently delete it from the computer where it

resides, and destroy all copies of the Program and Documentation in

Your possession, confirming to Pioneer in writing that You have done

so. Sections 2.2, 2.3, 2.4, 3, 4, 5 and 6 will continue in effect after this

Agreement’s termination.

General terms

Limitation of Liability. In no event will Pioneer or its subsidiar-

ies be liable in connection with this Agreement or its subject

matter, under any theory of liability, for any indirect, inciden-

tal, special, consequential or punitive damages, or damages

for lost profits, revenue, business, savings, data, use, or cost

of substitute procurement, even if advised of the possibility of

such damages or if such damages are foreseeable. In no event

will Pioneer’s liability for all damages exceed the amounts

actually paid by You to Pioneer or its subsidiaries for the

Program. The parties acknowledge that the liability limits and

risk allocation in this Agreement are reflected in the Program

price and are essential elements of the bargain between the

parties, without which Pioneer would not have provided the

Program or entered into this Agreement.

Definitions

“Documentation” means written documentation, specifica-

tions and help content made generally available by Pioneer to

aid in installing and using the Program.

“Program” means all or any part of Pioneer’s software

licensed to You by Pioneer under this Agreement.

Program license

Limited License. Subject to this Agreement’s restrictions,

Pioneer grants to You a limited, non-exclusive, nontransfer-

able, license (without the right to sublicense):

The limitations or exclusions of warranties and liability

contained in this Agreement do not affect or prejudice Your

statutory rights as consumer and shall apply to You only to the

extent such limitations or exclusions are permitted under the

laws of the jurisdiction where You are located.

Severability and Waiver. If any provision of this Agreement is

held to be illegal, invalid or otherwise unenforceable, that pro-

vision will be enforced to the extent possible or, if incapable

of enforcement, deemed to be severed and deleted from this

Agreement, and the remainder will continue in full force and

effect. The waiver by either party of any default or breach of

this Agreement will not waive any other or subsequent default

or breach.

To install a single copy of the Program on the hard disk

drive of Your computer, to use the Program only for Your

personal purpose complying with this Agreement and the

Documentation (“Authorized Use”);

To use the Documentation in support of Your Authorized

Use; and

To make one copy of the Program solely for backup pur-

poses, provided that all titles and trademark, copyright and

restricted rights notices are reproduced on the copy.

Restrictions. You will not copy or use the Program or

Documentation except as expressly permitted by this

Agreement. You will not transfer, sublicense, rent, lease or

lend the Program, or use it for third-party training, commercial

time-sharing or service bureau use. You will not Yourself or

through any third party modify, reverse engineer, disassemble

or decompile the Program, except to the extent expressly per-

mitted by applicable law, and then only after You have notified

Pioneer in writing of Your intended activities. You will not use

the Program on multiple processors without Pioneer’s prior

written consent.

No Assignment. You may not assign, sell, transfer, delegate or

otherwise dispose of this Agreement or any rights or obliga-

tions under it, whether voluntarily or involuntarily, by opera-

tion of law or otherwise, without Pioneer’s prior written con-

sent. Any purported assignment, transfer or delegation by You

will be null and void. Subject to the foregoing, this Agreement

will be binding upon and will inure to the benefit of the parties

and their respective successors and assigns.

Ownership. Pioneer or its licensor retains all right, title and

interest in and to all patent, copyright, trademark, trade secret

and other intellectual property rights in the Program and

Entire Agreement. This Agreement constitutes the entire

agreement between the parties and supersedes all prior or

contemporaneous agreements or representations, whether

Download from Www.Somanuals.com. All Manuals Search And Download.

written or oral, concerning its subject matter. This Agreement

may not be modified or amended without Pioneer’s prior and

express written consent, and no other act, document, usage or

custom will be deemed to amend or modify this Agreement.

You agree that this Agreement shall be governed and con-

strued by and under the laws of Japan.

About the rekordbox music

management software

rekordbox is a software program for purchasers of the CDJ-350 or

other Pioneer DJ players to manage the music files they use for DJ

play.

— rekordbox may be used for classifying and searching for

music files stored on your computer as well as creating play-

lists, all of which can help improve your DJ performance.

— rekordbox allows the detecting, measuring, and editing of

beats, tempos (BPM), and other elements of your music files

prior to a performance.

Cautions on installing the software

Read Software end user license agreement carefully before installing

rekordbox and the driver software.

The included CD-ROM contains installation programs in the fol-

lowing 12 languages.

English, French, German, Italian, Dutch, Spanish, Portuguese,

Russian, Chinese (simplified characters), Chinese (traditional

characters), Korean, Japanese.

When using rekordbox with an operating system in a different

language, follow the instructions on the screen to select [English].

Installing rekordbox

ꢀ About the installation procedure (Macintosh)

Driver

Supported operating systems

rekordbox

Read Cautions on installing the software carefully before installing

rekordbox.

software

Mac OS X (10.4.6 and later)

Authorization of the computer’s administrator is required to install

and uninstall rekordbox.

Log on as the user which was set as the computer’s administrator

before installing.

Windows 7 Home Pre-

32-bit version

64-bit version

32-bit version

mium/Professional/

Ultimate

Windows Vista

Home Basic/Home Pre-

mium/Business/Ulti-

mate (SP1 and later)

When the included CD-ROM is inserted into the

64-bit version

32-bit version

computer’s CD drive, the CD drive opens on the screen.

Double-click the [CD_menu.app] icon.

Windows XP Home edi-

If the CD drive does not open on the screen when the CD-ROM is

inserted, use Finder to open the CD drive, then double-click the

[CD_menu.app] icon.

tion/Professional (SP3

and later)

There is no need to install the driver software when using Mac OS X.

When using a 64-bit version of Windows, the driver software can only be

used for 32-bit applications.

<[CD.menu.app] icon>

ꢀ Minimum operating environment for rekordbox

CPU:

— For Mac OS X, Macintosh computer equipped with a 1.83 GHz

or greater Intel^®Core^™Duo (or compatible) processor

— For Windows^®7, Windows Vista^®and Windows^®XP, PC/AT

compatible computer equipped with a 2 GHz or greater Intel^®

Pentium^®4 (or compatible) processor

Required memory: 1 GB or more of RAM

Hard disc: 250 MB or more of free space (not including space for

storing music files, etc.)

CD drive: Optical disc drive on which the CD-ROM can be read

Sound: Audio output to speakers, headphones, etc. (internal or

external audio device)

Internet connection: For user registration and inquiries, use a web

browser supporting 128-bit SSL (Safari 2.0 or greater, Internet

Explorer^®6.0 or greater, etc.).

USB port: A USB port for connection of a USB device (flash mem-

ory, hard disc, etc.) is required to transfer music files to the USB

device.

When the CD-ROM’s menu is displayed, select

[rekordbox: Install Music Management Software], then

click [Start].

<CD-ROM menu>

Operation is not guaranteed on all computers, even those with the

operating environment described above.

Even with the required memory capacity indicated for the

operating environment above, in the cases described below the

software may not provide full functionality and performance due

to lack of memory. In this case, take the necessary measures

to ensure sufficient free memory. We recommend adding extra

memory in order to achieve stable performance.

— When there are many tracks being managed in the rekordbox

library

— When resident programs and services are running

Depending on the computer’s power settings, etc., the CPU

and hard disc processing capacity may be insufficient. When

using laptop computers in particular, always keep the AC power

connected and set the computer to maximum performance

conditions when using rekordbox.

Note that problems may arise in the operation of rekordbox due to

other software being used together with it.

To close the CD-ROM menu, click [Exit].

Download from Www.Somanuals.com. All Manuals Search And Download.

Install rekordbox following the instructions on the

screen.

About the driver software

(Windows)

This driver software is an exclusive ASIO driver for outputting audio

signals from the computer. To use the CDJ-350 connected to a com-

puter on which Windows is installed, install the driver software on the

computer beforehand.

ꢀ About the installation procedure (Windows)

Read Cautions on installing the software carefully before installing

rekordbox.

Authorization of the computer’s administrator is required to install

and uninstall rekordbox.

Log on as the user registered as the computer’s administrator

before installing rekordbox.

Installing the driver software

Insert the included CD-ROM into the computer’s CD

drive.

ꢀ Before installing the driver software

The CD-ROM menu is displayed.

If the CD-ROM menu does not appear when the CD-ROM is

inserted, open the CD drive from [Computer (or My Computer)] in

the [Start] menu, then double-click the [CD_menu.exe] icon.

Read Cautions on installing the software on page 10 carefully.

Turn off this unit’s power switch, then disconnect the USB cable

connecting this unit and the computer.

If any other programs are running on the computer, quit them.

To install or uninstall the driver software, you need to be autho-

rized by the administrator of your computer. Log on as the adminis-

trator of your computer before proceeding with the installation.

If you connect this unit to your computer without installing the

driver software first, an error may occur on your computer depend-

ing on the system environment.

If installation of the driver software is interrupted after it has

started, start the installation procedure over again from the

beginning.

When the CD-ROM’s menu is displayed, select

[rekordbox: Install Music Management Software], then

click [Start].

<CD-ROM menu>

Insert the included CD-ROM into the computer’s CD

drive.

The CD-ROM menu is displayed.

If the CD-ROM menu does not appear when the CD-ROM is

inserted, open the CD drive from [Computer (or My Computer)] in

the [Start] menu, then double-click the [CD_menu.exe] icon.

When the CD-ROM menu appears, select [Install

Driver Software (Pioneer_CDJ_Driver)], then click [Start].

To close the CD-ROM menu, click [Exit].

Install rekordbox following the instructions on the

screen.

Click [Cancel] to cancel installation after it has started.

Launching rekordbox

Log on as the user which was set as the computer’s administrator

before using rekordbox.

When rekordbox is started up for the first time, the license key

must be input. The license key is affixed to the CD-ROM package.

When rekordbox is started up, the operating instructions can be

viewed from the rekordbox [Help] menu.

To close the CD-ROM menu, click [Exit].

Proceed with installation according to the

ꢀ For Mac OS X

instructions on the screen.

If [Windows Security] appears on the screen while the installation is

in progress, click [Install this driver software anyway] and continue

with the installation.

Open the [Application] folder with Finder, then double-

click [rekordbox 1.x.x.app].

When installing on Windows XP

The 1.x.x indicates the rekordbox version.

If [Hardware Installation] appears on the screen while the instal-

lation is in progress, click [Continue Anyway] and continue with

the installation.

ꢀ For Windows^®7, Windows Vista^®and Windows^®XP

When the installation program is completed, a completion mes-

sage appears.

Click on the Windows [Start] menu button, then [All

Programs] > [Pioneer] > [rekordbox 1.x.x] > [rekordbox

1.x.x].

The 1.x.x indicates the rekordbox version.

Connecting the CDJ-350 and computer

Connect this unit to your computer via a USB cable.

For instructions on connecting, see Using DJ software on page 14.

Download from Www.Somanuals.com. All Manuals Search And Download.

Press [u].

Checking the version of the driver

software

Turn on the power of this unit.

Press [ ] for at least 1 second.

The [CONTROL MODE] screen appears on the main unit display.

Click Windows [Start] menu >[All Programs]>[Pioneer]>

[Pioneer CDJ]>[Pioneer CDJ Version Display Utility].

The message [Installing device driver software] may appear

when the CDJ-350 is connected to the computer for the first time or

when it is reconnected to the computer’s USB port. Wait until the

[Your devices are ready for use] message appears.

When installing on Windows XP

— [Can Windows connect to Windows Update to search for

software?] may appear while the installation is in progress.

Select [No, not this time] and click [Next] to continue with

the installation.

— [What do you want the wizard to do?] may appear while the

installation is in progress. Select [Install the software auto-

matically (Recommended)] and click [Next] to continue with

the installation.

— If [Hardware Installation] appears on the screen while the

installation is in progress, click [Continue Anyway] and con-

tinue with the installation.

Adjusting the buffer size

This unit functions as an audio device conforming to the ASIO

standards.

If an application using this unit as the default audio device (DJ

software, etc.) is running, quit that application before adjusting the

buffer size.

You can check the firmware version of this unit on the screen.

The firmware version is not displayed when the CDJ-350 is not con-

nected to the computer or when the CDJ-350 and computer are not

properly communicating.

Click Windows [Start] menu >[All Programs]>[Pioneer]>

[Pioneer CDJ]>[Pioneer CDJ ASIO Settings Utility].

Checking the latest information on the

driver software

For the latest information on the driver software for exclusive use with

this unit, visit our website shown below.

http://www.prodjnet.com/support/

A sufficiently large buffer size decreases the chance of sound dropout

(sound interruption) but increases audio signal transmission delay

(latency).

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections.

Refer to the operating instructions for the component to be connected.

Connect the power cord after all the connections between devices have been completed.

Be sure to use the included power cord.

Names of terminals

Rear panel

AUDIO

OUT

AC IN

CONTROL

USB

4 5

1 AC IN

3 USB (page 14)

Connect this to a power outlet.

Connect to a computer.

Connect the power cord after all the connections between devices

have been completed.

Be sure to use the included power cord.

4 CONTROL (page 14)

Connect the control cord (included) here.

5 AUDIO OUT L/R (page 13)

2 Kensington security slot

Connect the audio cables (included) here.

Basic style

When connected to a Pioneer DJ mixer using the control cord (included), operations such as starting playback on this unit can be controlled

using the DJ mixer’s fader (page 22).

The fader start function can only be used when connected to a Pioneer DJ mixer.

CH-1

PHONO

CH-2

PHONO

Audio cable

(included)

Audio cable

Control cord

^CDL

AUDIO

OUT

AUDIO

OUT

CONTROL

USB

CONTROL

USB

Control cord

(included)

MIC /AUX

TIME MODE

BACK

TIME MODE

BACK

MIC

AUX

PHONO

REMAIN

TEMPO

REMAIN

TEMPO

LEVEL

TRIM

LOCK

AUTO CUE

DISPLAY

AUTO CUE

DISPLAY

A.CUE

BPM

SELECT PUSH

INFO

BROWSE

USB

STOP

USB

STOP

USB

STOP

DISC

UTILITY

MASTER

CH-1 CH-2

SOURCE SELECT

BPM

LOCK

BPM

LOCK

REC

PLAY



PLAYLIST



MP3/AAC

WAV/AIFF

MP3/AAC

WAV/AIFF

LOW

MID

TRACK MARK

TRACK SEARCH

IN/CUE

OUT

RELOOP/EXIT

LOOP

BEAT LOOP

LOOP DRIVE

TRACK SEARCH

IN/CUE

OUT

RELOOP/EXIT

LOOP

BEAT LOOP

LOOP DRIVE

VINYL MODE





LOW

PREVIEW

TEMPO RANGE

MASTER TEMPO

TEMPO RANGE

MASTER TEMPO

HOT LOOP

OUT ADJUST

HOT LOOP

OUT ADJUST

MASTER LEVEL

MIC/AUX

LEVEL

TEMPO

CH-1

CH-2

HEADPHONES

MASTER EFFECT

CH-1

CUE

CH-2

CUE

GATE

JET

MIXING

CRUSH

FILTER

CUE

LEVEL

MASTER

LEVEL/DEPTH

ADER

START

PLAY/PAUSE

THRU

REV

FWD

REV

FWD

MULTI PLAYER

CHANNEL DJ MIXER

MULTI PLAYER

PHONES

DJ player

DJ mixer (example: DJM-350)

DJ player

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the relay play function

Relay playback on two DJ players is possible when the [CONTROL] terminals on this unit and the other Pioneer DJ player are interconnected

using a control cord (page 23).

CH-1

PHONO

CH-2

PHONO

Audio cable

(included)

Audio cable

^CDL

AUDIO

OUT

AUDIO

OUT

CONTROL

USB

CONTROL

USB

Control cord

(included)

MIC /AUX

TIME MODE

BACK

TIME MODE

BACK

MIC

AUX

PHONO

REMAIN

TEMPO

REMAIN

TEMPO

LEVEL

TRIM

LOCK

AUTO CUE

DISPLAY

AUTO CUE

DISPLAY

A.CUE

BPM

SELECT PUSH

INFO

BROWSE

USB

STOP

USB

STOP

USB

STOP

DISC

UTILITY

MASTER

CH-1 CH-2

SOURCE SELECT

BPM

LOCK

BPM

LOCK

REC

PLAY



PLAYLIST



MP3/AAC

WAV/AIFF

MP3/AAC

WAV/AIFF

LOW

MID

TRACK MARK

TRACK SEARCH

IN/CUE

OUT

RELOOP/EXIT

LOOP

BEAT LOOP

LOOP DRIVE

TRACK SEARCH

IN/CUE

OUT

RELOOP/EXIT

LOOP

BEAT LOOP

LOOP DRIVE

VINYL MODE





LOW

PREVIEW

TEMPO RANGE

MASTER TEMPO

TEMPO RANGE

MASTER TEMPO

HOT LOOP

OUT ADJUST

HOT LOOP

OUT ADJUST

MASTER LEVEL

MIC/AUX

LEVEL

TEMPO

CH-1

CH-2

HEADPHONES

MASTER EFFECT

CH-1

CUE

CH-2

CUE

GATE

JET

MIXING

CRUSH

FILTER

CUE

LEVEL

MASTER

LEVEL/DEPTH

ADER

START

PLAY/PAUSE

THRU

REV

FWD

REV

FWD

MULTI PLAYER

CHANNEL DJ MIXER

MULTI PLAYER

PHONES

DJ player

DJ mixer (example: DJM-350)

DJ player

Using DJ software

When connected to a computer by USB cable, the DJ software can be operated with this units (page 23).

The sound of music files playing on the computer can be output from this unit (page 11).

DJ software

Computer

USB cable

CH-1

PHONO

CH-2

PHONO

Audio cable

(included)

Audio cable

^CDL

AUDIO

OUT

AUDIO

OUT

CONTROL

USB

CONTROL

USB

MIC /AUX

TIME MODE

BACK

TIME MODE

BACK

MIC

AUX

PHONO

REMAIN

TEMPO

REMAIN

TEMPO

LEVEL

TRIM

LOCK

AUTO CUE

DISPLAY

AUTO CUE

DISPLAY

A.CUE

BPM

SELECT PUSH

INFO

BROWSE

USB

STOP

USB

STOP

USB

STOP

DISC

UTILITY

MASTER

CH-1 CH-2

SOURCE SELECT

BPM

LOCK

BPM

LOCK

REC

PLAY



PLAYLIST



MP3/AAC

WAV/AIFF

MP3/AAC

WAV/AIFF

LOW

MID

TRACK MARK

TRACK SEARCH

IN/CUE

OUT

RELOOP/EXIT

LOOP

BEAT LOOP

LOOP DRIVE

TRACK SEARCH

IN/CUE

OUT

RELOOP/EXIT

LOOP

BEAT LOOP

LOOP DRIVE

VINYL MODE





LOW

PREVIEW

TEMPO RANGE

MASTER TEMPO

TEMPO RANGE

MASTER TEMPO

HOT LOOP

OUT ADJUST

HOT LOOP

OUT ADJUST

MASTER LEVEL

MIC/AUX

LEVEL

TEMPO

CH-1

CH-2

HEADPHONES

MASTER EFFECT

CH-1

CUE

CH-2

CUE

GATE

JET

MIXING

CRUSH

FILTER

CUE

LEVEL

MASTER

LEVEL/DEPTH

ADER

START

PLAY/PAUSE

THRU

REV

FWD

REV

FWD

MULTI PLAYER

CHANNEL DJ MIXER

MULTI PLAYER

PHONES

DJ player

DJ mixer (example: DJM-350)

DJ player

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations

Control panel

Source select section

Browse section

TIME MODE

BACK

AUTO CUE

SELECT PUSH

DISPLAY

USB

STOP

DISC

UTILITY

_{SOURCE SELECT}6

MP3/AAC

WAV/AIFF

BPM

LOCK

PLAYLIST

TRACK SEARCH

IN/CUE

OUT

RELOOP/EXIT

LOOP

BEAT LOOP

LOOP DIVIDE

VINYL MODE

TEMPO RANGE

MASTER TEMPO

HOT LOOP

OUT ADJUST

f g h ^—

c d

TEMPO

CUE

PLAY/PAUSE

REV

FWD

MULTI PLAYER

Player section

Tempo control section

1 u (Power switch) (page 17)

d VINYL MODE

2 hDISC (page 16)

ꢀ 1 Loop and beat loop part

e LOOP IN/CUE (HOT LOOP)

f LOOP OUT (OUT ADJUST)

g RELOOP/EXIT

Source select section

Select the source to be played with this unit here (page 16).

3 USB device insertion slot

4 USB STOP

h BEAT LOOP (LOOP DIVIDE)

(COMPUTER)

(USB)

Browse section

Information on the device loaded on this unit, loaded tracks, etc., is

displayed here (page 20).

(DISC)

i TIME MODE (AUTO CUE)

j DISPLAY (UTILITY)

k Main unit display

l BACK

Player section

These controls can be used for such basic DJ player operations as playing

discs, setting cue/loop points and operating the jog dial (page 17).

8 TRACK SEARCH o, p

9 SEARCH m, n

a CUE

ꢀ 2 Playlist part

m SELECT PUSH (rotary selector)

b PLAY/PAUSE f

c Jog dial

n PLAYLIST

Download from Www.Somanuals.com. All Manuals Search And Download.

9 TEMPO %

Tempo control section

This indicates the percentage by which the playing speed is changed.

Adjust the track playing speed here (page 22).

When [BPM LOCK] is used, the playing speeds of two tracks can be

matched easily (page 22).

a WIDE, ±16, ±10, ±6

This indicates the range by which the playing speed can be adjusted.

b BPM

o BPM LOCK

Displays BPM (Beats Per Minute) of the track currently being played.

p TEMPO RANGE

q MASTER TEMPO

r TEMPO

c Information display section

Up to 13 characters can be displayed for each. The characters that

can be displayed are letters A to Z, numbers 0 to 9 and certain sym-

bols. “?” is displayed for other characters.

Setting the source to be played

(source select section)

Front panel

TIME MODE

BACK

AUTO CUE

DISPLAY

SELECT PUSH

USB

STOP

DISC

UTILITY

_{SOURCE SELECT}6

MP3/AAC

WAV/AIFF

BPM

LOCK

PLAYLIST

s Disc force eject pin insertion hole (page 16)

t Disc insertion slot (page 16)

Main unit display

Loading discs

Set the disc with the printed side facing up.

Insert the disc horizontally into the disc insertion slot in the main

unit’s front panel.

REMAIN

TEMPO

LOCK

Do not load more than 1 disc.

Do not force discs into the set’s disc insertion slot when the set’s

power is off. Doing so could damage the disc or the set.

When the disc is being drawn in or ejected, do not apply any force

to the disc in the direction opposite its movement. Doing so could

damage the disc or the set.

A.CUE

BPM

INFO

BROWSE

Press [u] 1.

1 Track number

Turn on the power of this unit.

This displays the track number.

It is not possible to display more than 100 tracks.

Insert the disc into the disc insertion slot t.

Playback starts.

2 A. CUE (page 18)

When auto cue is turned on, playback starts when

[PLAY/PAUSEf] is pressed. For details on the auto cue function,

see Setting auto cue on page 18.

This lights when auto cue is set.

3 Playing address display

The track is displayed as a bar graph.

Turns off from the left side when the remaining time is displayed. The

entire graph flashes slowly when the remaining track time is under 30

seconds, then flashes quickly when the remaining track time is under

15 seconds.

Ejecting discs

Press [h DISC] 2.

The disc is ejected from the disc insertion slot.

4 INFO (page 20)

If you press [hDISC] by mistake, press [PLAY/PAUSEf] immedi-

ately to restore this unit to the status it was in just before [h DISC]

was pressed. (No sound is output during this time.)

5 BROWSE (page 20)

6 REMAIN

This lights when the time display is set to the remaining time.

About ejecting discs by force

7 M, S, F (time display)

“M” indicates minutes, “S” seconds, “F” frames.

There are 75 frames to a second.

If the disc is not ejected when [h DISC] is pressed, eject the disc

forcibly by inserting the disc force eject pin into the disc force eject

pin insertion hole.

8 LOCK (page 22)

When forcibly ejecting a disc, be sure to do so following the proce-

dure below.

This lights when the BPM is locked.

Download from Www.Somanuals.com. All Manuals Search And Download.

Press [u] 1 to turn this unit’s power off, then wait at

About the power switch of this unit

least 1 minute.

Never forcibly eject a disc directly after turning off the set’s power.

Doing so is dangerous for the reasons described below.

ꢀ To turn the power on

The disc will still be spinning when ejected and could hit your

fingers, etc., causing injury.

Press [u] 1.

Turn on the power of this unit.

The [u] indicator lights green.

Also, the disc clamp will rotate in an unstable way, and the disc

could get scratched.

ꢀ To set to the standby mode

Use the included disc force eject pin. (Do not use

anything else.)

When this unit’s power is on, press [u] 1 for at least 1

The included disc force eject pin is mounted on the CDJ-350’s bottom

panel. When the pin is inserted all the way into the insertion hole, the

disc is ejected 5 mm to 10 mm out of the disc insertion slot. Grasp the

disc with your fingers and pull it out.

second.

This unit is set to the standby mode.

The [u] indicator lights red.

When [u] is pressed again, the power turns on.

This unit is equipped with an auto standby function. For details,

see About the auto standby function on page 23.

Loading USB devices

Connect the USB device to the USB device insertion slot 3.

The [USB STOP] indicator lights.

Playback

Load the source onto this unit.

Press [ ] 6 or [ ] 7 for at least 1 second.

Removing USB devices from the set

This selects the source.

Be sure to follow the procedure below when removing USB

devices from the set. Removing a USB device without following

this procedure could erase the set’s management data and make it

impossible to read the USB device.

Turn the rotary selector m.

Select the track.

To move to lower layers in a folder, select the folder then press the

rotary selector.

To return to higher layers, press [BACK] l.

Press [BACK] for more than 1 second to move to the top layer.

When turning the set’s power off, be sure to remove the USB device

first.

Press [USB STOP] 4 for at least 2 seconds.

The [USB STOP] indicator turns off.

Press the rotary selector m.

The track is loaded and playback begins.

Disconnect the USB device.

When a disc containing music files recorded with a hierarchical

structure is loaded, playback starts from the tracks in the upper-

most level.

Basic Operations (player, source

select and browse sections)

Pausing

During playback, press [PLAY/PAUSEf] b.

TIME MODE

BACK

Playback resumes when [PLAY/PAUSEf] is pressed again.

AUTO CUE

SELECT PUSH

DISPLAY

ꢀ Resuming playback from the position playing

USB

STOP

DISC

UTILITY

just before the disc was ejected (Resume)

_{SOURCE SELECT}6

MP3/AAC

WAV/AIFF

BPM

LOCK

PLAYLIST

After ejecting the disc, immediately reload that same disc

into this unit.

TRACK SEARCH

IN/CUE

OUT

RELOOP/EXIT

LOOP

BEAT LOOP

LOOP DIVIDE

VINYL MODE

The resume function only works when the same disc is ejected

then reloaded before loading another disc.

TEMPO RANGE

MASTER TEMPO

HOT LOOP

OUT ADJUST

f g h ^—

The resume function does not work for USB devices.

c d

TEMPO

Forward and reverse scanning

Press [SEARCH m, n] 9.

The disc is forwarded when [n] is pressed and held in.

The disc is reversed when [m] is pressed and held in.

CUE

Finding the beginnings of tracks (Track

Search)

PLAY/PAUSE

Press [TRACK SEARCH o, p] 8.

Press the [p] to move to the beginning of the next track.

REV

FWD

MULTI PLAYER

Download from Www.Somanuals.com. All Manuals Search And Download.

When [o] is pressed, playback returns to the beginning of the cur-

rently playing track. When pressed twice in a row, playback returns to

the beginning of the previous track.

The auto cue level setting remains in the memory, even when the

power is turned off.

When auto cue is turned on, the set searches for the beginning of

the track and pauses there (page 18).

Changing the auto cue level

The acoustic pressure level identified as a silent section with the auto

cue function can be selected from eight levels.

–36 dB, –42 dB, –48 dB, –54 dB, –60 dB, –66 dB, –72 dB and –78 dB

Setting Cue

The auto cue level setting remains in the memory, even when the

power is turned off.

The auto cue level can be changed using one of the procedures

described below.

During playback, press [PLAY/PAUSEf] b.

Playback is paused.

Press [CUE] a.

The point at which the track is paused is set as the cue point.

The [PLAY/PAUSEf] indicator flashes and the [CUE] indicator

lights. No sound is output at this time.

ꢀ Using [DISPLAY (UTILITY)] j

Press [DISPLAY (UTILITY)] j for at least 1 second.

When a new cue point is set, the previously set cue point is

canceled.

The [UTILITY] screen is displayed.

Turn the rotary selector m, then press it.

Select [A. CUE LEVEL].

Adjusting the cue point position

Turn the rotary selector m, then press it.

While pausing at the cue point, press [SEARCH m,

The auto cue level setting changes.

n] 9.

The [PLAY/PAUSEf] and [CUE] indicators flash.

ꢀ Using [TIME MODE (AUTO CUE)] i

Press [SEARCH m, n] 9.

The cue point can be fine-adjusted in units of single frames.

Press [TIME MODE (AUTO CUE)] i for at least 5

The same operation is possible using the jog dial.

seconds.

The auto cue level setting changing mode is set.

The current auto cue level is shown on the main unit display.

Press [CUE] a.

The position at which the button was pressed is set as the new cue

point.

Turn the rotary selector m, then press it.

When a new cue point is set, the previously set cue point is

canceled.

The auto cue level setting changes.

Returning to Cue Point (Back Cue)

During playback, press [CUE] a.

The set immediately returns to the currently set cue point and pauses.

When [PLAY/PAUSEf] is pressed, playback starts from the cue

point.

Checking Cue Point (Cue Point Sampler)

After returning to the cue point, press and hold in [CUE] a.

Playback starts from the set cue point. Playback continues while the

button is held in.

Setting Cue Point during playback (Real

Time Cue)

During playback, press [LOOP IN/CUE (HOT LOOP)] e.

The point at which the button was pressed is set as the cue point.

Setting auto cue

When a track is loaded or the track search operation is performed,

the silent section at the beginning of the track is skipped and the cue

point is automatically set at the point immediately before the sound

starts.

Press [TIME MODE (AUTO CUE)] i for at least 1 second.

Auto cue is set to on.

[A. CUE] lights on the main unit display.

When [TIME MODE (AUTO CUE)] is pressed again for at least 1

second, auto cue is set to off.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ Super fast track search

Operating the jog dial

When the jog dial c is spun while pressing [TRACK SEARCH o,

p] 8, tracks are searched at high speed in the direction in which the

jog dial is spun.

The top of the jog dial has an embedded switch. Do not place

objects on the jog dial or subject it to strong forces.

Water or other liquids getting into the set will lead to malfunction.

Setting loops (loop and beat loop

part)

Switching the jog dial mode

TRACK SEARCH

IN/CUE

OUT

RELOOP/EXIT

BEAT LOOP

VINYL MODE

Press [VINYL MODE] d.

The mode switches between VINYL and CDJ each time the button is

pressed.

LOOP

TEMPO RANGE

HOT LOOP

OUT ADJUST

LOOP DIVIDE

f g h ^—

The indicator lights when the VINYL mode is selected.

— VINYL mode: When the top of the jog dial is pressed during

playback, playback stops, and when the jog dial is spun at this

time sound is produced according to the direction in which

the jog dial is spun.

During playback, press [LOOP IN/CUE (HOT LOOP)] e.

Loop In Point is set.

This operation is not necessary if you have already set a Cue Point

as a Loop In Point.

— CDJ mode: Playback does not stop even when the top of the

jog dial is pressed. Such operations as scratching cannot be

performed.

Press [LOOP OUT (OUT ADJUST)] f.

The loop out point is set, and loop playback begins.

Scratch

Fine-adjusting the loop out point (loop

out adjust)

Press [VINYL MODE] d.

Set the jog mode to VINYL.

During loop playback, press [LOOP OUT

During playback, press the top of the jog dial c.

(OUT ADJUST)] f.

[LOOP OUT (OUT ADJUST)] starts flashing quickly and [LOOP IN/CUE

(HOT LOOP)] turns off.

Playback stops.

Spin the jog dial c in the direction you want to play

The loop out point’s time is displayed on the main unit display.

and at the desired speed.

The sound is played according to the direction and speed at which the

jog dial is spun by spinning the top of the jog dial while pressing it.

Press [SEARCH m, n] 9.

The loop out point can be adjusted in units of single frames.

The same operation is possible using the jog dial.

The loop out point adjustment range is anywhere after the loop in

point.

Release your hand from the top of the jog dial c.

Normal playback resumes.

Press [LOOP OUT (OUT ADJUST)] f.

Loop playback resumes.

Pitch bend

Loop playback also resumes if no operation is performed for over

10 seconds.

During playback, spin the outer section without touching

the top of the jog dial c.

The playing speed increases when spun clockwise, decreases when

spun counterclockwise. When spinning is stopped, playback returns

to the normal speed.

Canceling Loop playback (Loop Exit)

During loop playback, press [RELOOP/EXIT] g.

Playback continues beyond the Loop Out Point without returning to

the Loop In Point.

When the jog mode is set to the CDJ mode, the same operation

can be performed by spinning the top of the jog dial.

Frame search

Returning to Loop playback (Reloop)

In the pause mode, spin the jog dial c.

The pause position can be moved in units of single frames.

After canceling loop playback, press [RELOOP/EXIT] g

The position is moved in the direction of playback when the jog

dial is spun clockwise, in the reverse direction when it is spun

counterclockwise. The position moves 135 for one revolution of the

jog dial.

during playback.

The track returns to the previously set loop in point and loop playback

begins.

Dividing loops (Loop Divide)

Super fast search

During loop playback, press [BEAT LOOP (LOOP DIVIDE)] h.

The length of loop playback is divided in half each time [–] is pressed.

When [+] is pressed, the loop playback length returns to the original

length.

Spin the jog dial c while pressing [SEARCH m, n] 9.

The track is fast-forwarded/fast-reversed in the direction in which the

jog dial is spun.

This function is canceled when [SEARCH m, n] is released.

When you stop the jog dial from spinning, normal playback

resumes.

The fast-forward/fast-reverse speed can be adjusted according to

the speed at which the jog dial is spun.

Download from Www.Somanuals.com. All Manuals Search And Download.

Returning to the loop in point (Hot Loop)

Using the beat display function

This displays the beat and playback position of the currently playing

track.

During loop playback, press [LOOP IN/CUE (HOT LOOP)] e.

The track instantaneously returns to the set loop in point and loop

playback starts.

LOCK

A.CUE

BPM

Setting loops automatically based on the

track’s tempo (Beat Loop)

INFO

BROWSE

In the play or pause mode, press [BEAT LOOP

(LOOP DIVIDE)] h.

The loop out point is set automatically according to the track’s tempo

(BPM) and loop playback starts.

Beat position

Playback position

The beat display screen is one item of the [INFO] display.

When set to the [INFO] display, the display switches to the beat

Loop playback cannot be performed properly if the BPM value is

not displayed.

display screen automatically when scratching and looping.

Press [DISPLAY (UTILITY)] j.

Displaying track information

(browse section)

Switch to the [INFO] display.

Turn the rotary selector m.

Display the beat display screen.

TIME MODE

BACK

Searching for tracks quickly using

the library information

AUTO CUE

SELECT PUSH

DISPLAY

USB

STOP

DISC

UTILITY

When library information created using rekordbox is recorded on the

USB device, the library information can be used to quickly search for

tracks.

SOURCE SELECT

BPM

LOCK

PLAYLIST

MP3/AAC

WAV/AIFF

REMAIN

TEMPO

Searching by specifying the first

character (jump)

LOCK

A.CUE

BPM

When the item names in the category are sorted in alphabetical order,

you can move to items beginning with the specified character.

INFO

BROWSE

This function may not work for some categories.

Press [DISPLAY (UTILITY)] j.

Switch to the [BROWSE] display.

About the [BROWSE] and [INFO] displays

Turn the rotary selector m, then press it.

Select the category.

ꢀ [BROWSE] display

Press the rotary selector m for at least 1 second.

The display switches to the character input screen.

The following information is displayed in the information display

section.

This displays the loaded tracks, sorted in category or tree structure.

The display on the information display section differs according to

whether or not library information is recorded on the USB device.

— With library information d Library browsing: The music files are

displayed by the categories set in rekordbox (album, artist, etc.).

The category types can be changed in the Preferences (environ-

mental settings) in rekordbox.

— Upper section: Specified character

— Lower section: Items beginning with the character in the

upper section

Turn the rotary selector m.

— Without library information d Folder browsing: The folders/tracks

on the medium are displayed with a tree structure.

The character displayed in the upper section of the information dis-

play switches.

The jump destination items corresponding to the character in the

upper section are displayed in the lower section.

ꢀ [INFO] display

This displays detailed information on the loaded tracks.

The artist name, album name and beat display are displayed here.

Press the rotary selector m.

The display switches to the item selected in step 4.

ꢀ Switching the display mode

Searching by inputting a character string

This function lets you display only the artists, albums, tracks or files

containing the character string you input.

Press [DISPLAY (UTILITY)] j.

The [BROWSE] and [INFO] displays switch each time the button is

pressed.

Categories not selected in the Preferences (environmental set-

tings) in rekordbox are not displayed.

Press [DISPLAY (UTILITY)] j.

Switch to the [BROWSE] display.

Download from Www.Somanuals.com. All Manuals Search And Download.

The maximum number of tracks that can be registered in one

playlist is 99.

Turn the rotary selector m.

Select [SEARCH].

Press [PLAYLIST] n.

Press the rotary selector m.

The display switches to the [ADD TO] screen.

The display switches to the character input screen.

Turn the rotary selector m.

Use the rotary selector m to input a character.

Select the playlist.

Turn the rotary selector and select the desired character, then press

the rotary selector to enter that character.

To create a new playlist, select [NEW PLAYLIST].

Press [PLAYLIST] or [BACK] to return to the original screen.

Repeat this operation to input other characters.

Press the rotary selector m.

Once you have completed inputting the character

The track is added to the playlist.

string, press the rotary selector m.

Only items containing the character string you have input are

displayed.

Editing playlists

The following information is displayed in the information display

section.

— Upper section: Number of items containing the input charac-

ter string

ꢀ Changing the order of the tracks

— Lower section: Names of items containing the input character

Select the track whose order in the playlist you want to change

beforehand.

string

Press [PLAYLIST] n.

The resorting screen is displayed.

About the playback history

(HISTORY)

When tracks managed with rekordbox are played, the playback history

is registered at [HISTORY].

Turn the rotary selector m.

Select the position to which the track is to be moved.

The track is moved to the position between the two tracks displayed in

the information display section.

The playback history is recorded on the USB device.

The maximum number of tracks that can be recorded is 999.

The playback history is not recorded if there is not enough free

space on the USB device or if the USB device is write-protected.

Playlists can be made based on the playback history using rekord-

box. For details, see the rekordbox operating instructions.

When a playback history is stored as a playlist using rekordbox,

the playback history is deleted.

Press the rotary selector m.

The track order changes.

ꢀ Removing tracks from playlists

Select the track you want to remove from the playlist beforehand.

A new [HISTORY] is created each time the power is turned on and

off or the USB device is disconnected then reconnected.

Press [PLAYLIST] n for at least 1 second.

The remove menu is displayed.

Turn the rotary selector m, then press it.

— [CANCEL]: The track(s) is (are) not removed.

— [OK]: The track(s) is (are) removed.

Deleting the playback history

Turn the rotary selector m.

ꢀ Deleting playlists

Select [HISTORY].

Select the playlist you want to delete from the [PLAYLIST] category

beforehand.

Press the rotary selector m for at least 1 second.

The delete menu is displayed.

Press [PLAYLIST] n for at least 1 second.

Turn the rotary selector m to select the range to be

The delete menu is displayed.

deleted.

— [CANCEL]: The [HISTORY]s are not deleted.

— [ONE]: The [HISTORY] selected with the cursor is deleted.

— [ALL]: All the [HISTORY]s are deleted.

Turn the rotary selector m, then press it.

— [CANCEL]: The playlist is not deleted.

— [OK]: The playlist is deleted.

Press the rotary selector m.

The range selected in step 3 is deleted.

Using playlists

SELECT PUSH

DISPLAY

USB

STOP

DISC

UTILITY

SOURCE SELECT

BPM

LOCK

PLAYLIST

MP3/AAC

WAV/AIFF

Adding tracks to playlists

First load the USB device onto this unit.

To add the currently playing track, switch to the [INFO] screen.

To select and add a track, switch to the [BROWSE] screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

The current BPM value or the master BPM set the previous time is

displayed on the main unit display and [BPM] flashes.

Adjusting the playing speed (tempo

control section)

Turn the rotary selector m.

Change the BPM value to the value you want to set as the master

BPM.

BPM

PLAYLIST

LOCK

Press the rotary selector m.

The master BPM is set.

OP/EXIT

LOOP

BEAT LOOP

LOOP DIVIDE

VINYL MODE

If no operation is performed for over 10 seconds, the BPM value dis-

played in the information display section is set as the master BPM.

When [BPM LOCK] is pressed for at least 1 second while in the

master BPM changing mode, the BPM value of the currently play-

ing track is set as the master BPM.

TEMPO RANGE

MASTER TEMPO

—

TEMPO

To change the master BPM, start over from step 1.

Using the BPM lock function

First set the master BPM.

The BPM lock function cannot be used for tracks for which the

BPM cannot be measured correctly.

While the track is playing, press [BPM LOCK] o.

The BPM of the currently playing track is synchronized with the mas-

ter BPM.

FWD

[LOCK] appears on the main unit display.

MULTI PLAYER

[TEMPO RANGE] is set to [±16].

[LOCK] flashes when the BPM of the currently playing track changes.

Press [BPM LOCK] while [LOCK] is flashing to re-lock the BPM.

Move [TEMPO] r forward or backward.

The playing speed increases when the slider is moved to the [+] side

(towards you), decreases when the slider is moved to the [–] side

(away from you).

The percentage by which the playing speed is changed is displayed at

[TEMPO %] on the main unit display.

ꢀ About the tempo display in the BPM lock mode

When in the BPM lock mode, [TEMPO %] on the main unit display

switches at set intervals between the master BPM and the difference

with the position of the [TEMPO] slider.

— [INC]: To match the master BPM with the position of the [TEMPO]

slider, move [TEMPO] to the [+] side (towards you).

— [dEC]: To match the master BPM with the position of the [TEMPO]

slider, move [TEMPO] to the [–] side (away from you).

Selecting the playing speed adjustment

range

ꢀ Canceling the BPM lock mode

Press [TEMPO RANGE] p.

There are four ways to cancel the BPM lock mode.

— By pressing [BPM LOCK] while in the BPM lock mode.

— Move the [TEMPO] slider to set the track’s playing speed to faster

or slower than the master BPM.

— By loading a track.

— By searching for a track (track search).

The playing speed adjustment range switches each time the button is

pressed.

[WIDE, ±16, ±10, ±6] lights on the main unit display.

The speed can be adjusted in units of 0.02 % at [±6] %, in units of

0.05 % at [±10] %, in units of 0.05 % at [±16] %, and in units of 0.5 %

at [WIDE].

The [WIDE] adjustment range is ±100 %. When set to –100 %,

playback stops.

[WIDE] can only be selected when playing music CDs (CD-DA).

Operations in combination with a DJ

mixer

Adjusting the playing speed without

changing the pitch (Master Tempo)

Also refer to the DJ mixer’s operating instructions.

Starting playback using a DJ mixer’s

fader (Fader Start)

Press [MASTER TEMPO] q.

The [MASTER TEMPO] indicator lights. The pitch does not change

even when the playing speed is changed with the [TEMPO] slider.

The sound is digitally processed, so the sound quality changes.

Connect the CDJ-350 with a Pioneer DJ mixer using

the included control cord.

For instructions on connecting, see Basic style on page 13.

Using [BPM LOCK]

When the master BPM is set in advance, the playing speed of the cur-

rently playing track can be automatically set to the master BPM at the

press of a button.

Turn on the fader start function from the DJ mixer.

Set the cue.

Move the DJ mixer’s channel fader or cross fader.

This unit’s pause mode is canceled and the track is played

instantaneously.

Setting the master BPM

When the channel fader or cross fader is set back to its original

position, playback cues back to the set cue point and the pause

mode is set (Back Cue).

Press [BPM LOCK] o for at least 1 second.

The master BPM changing mode is set.

Download from Www.Somanuals.com. All Manuals Search And Download.

Relay play on two DJ players

Changing the settings

Connect the CDJ-350 and a DJ mixer.

For instructions on connecting, see Using the relay play function on

TIME MODE

BACK

page 14.

AUTO CUE

Set the DJ mixer’s cross fader to the center position.

Turn auto cue on for both DJ players.

SELECT PUSH

DISPLAY

USB

STOP

DISC

UTILITY

The DJ players’ auto cue indicators light.

SOURCE SELECT

BPM

PLAYLIST

LOCK

MP3/AAC

WAV/AIFF

Start playback on this unit.

When playback of the first track on this unit finishes, playback auto-

matically begins on the other DJ player. This unit cues at the begin-

ning of the next track and is set to the pause mode. This operation is

repeated for relay play on the two DJ players.

Press [DISPLAY (UTILITY)] j for at least 1 second.

The [UTILITY] screen is displayed.

The medium can be changed and the cue point set on the DJ

player that is in standby.

The fader start function does not work during relay play.

Relay play may not be possible if the two DJ players are not con-

nected to the same DJ mixer.

Use the rotary selector m to change the setting.

Press [BACK] l to return to the previous screen.

Press the rotary selector m.

The changed settings are stored.

If the power of the currently playing DJ player is turned off, play-

back may start on the other DJ player.

To close the [UTILITY] screen, press [DISPLAY (UTILITY)] or

[BACK].

Using the DJ software

Setting preferences

The CDJ-350 also outputs the operating data for the buttons and

dials in MIDI format. If you connect a computer with a built-in MIDI-

compatible DJ software via a USB cable, you can operate the DJ

software on this unit. The sound of music files being played on the

computer can also be output from the CDJ-350.

To use this unit as an audio device, install the driver software on the

computer beforehand (page 11). This unit must also be selected in the

DJ software’s audio output device settings. For details, see your DJ

software’s operating instructions.

Options

Selection items

settings

Descriptions

–36 dB/–42 dB/–48 dB/

–54 dB/–60 dB*/–66 dB/

–72 dB/–78 dB

For details, see Chang-

ing the auto cue level on

page 18.

A. CUE LEVEL

MIDI CHANNEL

AUTO STANDBY

1* to 16

—

For details, see About the

OFF/20 min*/40 min/60 min auto standby function on

page 23.

Connect the USB port on this unit to your computer.

Sets the browsing method

for media on which Pioneer

MEP-7000 libraries are

recorded.

For instructions on connecting, see Using DJ software on page 14.

LIBRARY CRE-

ATOR

LIBRARY*/FOLDER

Press [ ] for at least 1 second.

The [CONTROL MODE] screen appears on the main unit display.

Displays the CDJ-350’s

software version.

VERSION No.

—

Start the DJ software.

Communication with the DJ software starts.

The DJ software can be operated using this unit’s buttons and

controls.

*: Setting upon purchase

It may not be possible to use some buttons to operate the DJ

software.

ꢀ About the auto standby function

For messages output by the CDJ-350, see List of MIDI Messages.

When the auto standby function is turned on, the power is automati-

cally set to the standby mode after the set time has passed with all of

the conditions below met.

— That this unit’s buttons, controls, etc., are not operated.

— That no track is played.

Changing the MIDI channel setting

Press [DISPLAY (UTILITY)] j for at least 1 second.

The [UTILITY] screen is displayed.

Turn the rotary selector m, then press it.

Select [MIDI CH.].

Turn the rotary selector m, then press it.

Select the MIDI channel and change the setting. A setting from 1 – 16

can be selected.

Press the rotary selector m.

The changed MIDI channel settings are stored.

To close the [UTILITY] screen, press [DISPLAY (UTILITY)] or

[BACK].

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional information

Troubleshooting

Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points

below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble can-

not be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

This unit may not operate properly due to static electricity or other external influences. In this case, proper operation may be restored by turn-

ing the power off, waiting 1 minute, then turning the power back on.

Non-finalized (partial discs) CD-R/-RW cannot be played on the CDJ-350.

Irregularly shaped discs other than standard 12 cm discs cannot be played on the CDJ-350 (doing so will lead to damage or accidents).

The BPM measured by the CDJ-350 may differ from the BPM indicated on the disc or that of a Pioneer DJ mixer, etc. This is due to the differ-

ent methods used for measuring the BPM, and is not a malfunction.

Problem

Disc cannot be ejected.

Check

—

Remedy

If [hDISC] does not work, eject the disc by inserting the pin into the disc force eject hole. (page 16)

Playback does not start when disc Is the disc or file playable?

See About discs on page 7 or Playable music file formats on page 8.

is loaded.

Is the auto cue function activated? Press [TIME MODE (AUTO CUE)] for at least 1 second to cancel the auto cue function. (page 18)

File cannot be played.

Is the file copyright-protected (by DRM)? Copyright-protected files cannot be played.

No sound is produced, or sound is Are you operating the connected

Check the operation of the DJ mixer.

distorted or noisy.

DJ mixer properly?

Is the CDJ-350 placed near a TV?

Is the disc scratched?

Is the disc dirty?

Turn the TV’s power off, or install the CDJ-350 and TV away from one another.

Scratched discs may not play.

Wipe the dirt off the disc. (page 25)

Loud noise is produced or play-

back stops when a certain disc

is played.

Track search operation takes

too long.

Is the auto cue function activated? Track searching may take some time when there are long silent sections between tracks.

—

If track searching is not possible within 10 seconds, a cue point is set at the beginning of the

track.

Back cue function does not work. Is a cue point set?

Loop play function does not work. Is a cue point set?

Set a cue point. (page 18)

Settings are not stored in the

memory.

USB device is not recognized.

Has the power been turned off

After changing settings, wait at least 10 seconds before turning the power off.

directly after changing the setting?

Is the USB device properly con-

nected?

Connect the device securely (all the way in).

Is the USB device connected via a USB hubs cannot be used.

USB hub?

Is the USB device supported by the This player only supports USB mass storage class devices.

CDJ-350?

This player supports portable flash memory and digital audio playback devices.

Is the file format supported by the Check the file format of the connected USB device. For the file formats supported by the CDJ-

CDJ-350?

350, see About USB devices on page 8.

Are you using a USB device (such Use a USB device within this unit’s rated current (such as a hard disk driven by an AC adapter or

as a bus power-driven hard disk)

other external power supply).

whose current is higher than this

unit’s rated current (500 mA)?

—

Turn the power off, wait 1 minute, then turn the power back on.

The playing address display is not dis-

played in the remaining time mode.

Time is required to read USB

When playing files recorded in VBR, it may happen that the set cannot detect the length of the

track immediately and that some time is required for the playing address display to appear.

When there are many folders or files, some time may be required for loading.

Is there a large number of folders or

devices (flash memory drives and files recorded on the USB device?

hard discs).

Are files other than music files

stored on the USB device?

Are you playing a music CD?

When files other than music files are stored in folders, time is required to read them as well. Do

not store files or folders other than music files on the USB device.

The category is not displayed for music CDs.

The category is not displayed.

Is the library information recorded Use rekordbox to create the library information.

on the USB device?

Is the USB device write-protected? Set the USB device so that files can be written on it.

Set the USB device’s write-protect switch to the off position.

Nothing is displayed.

Is the auto standby function acti-

This unit is shipped with the auto standby function turned on. If you do not want to use the auto

vated?

—

standby function, set [AUTO STANDBY] to [OFF]. (page 23)

Normal operation can sometimes be restored by unplugging the power cord, waiting at least 1

minute, then plugging the power cord back in.

The [u] indicator flashes and the

power does not turn on.

If the symptom persists, unplug the power cord and request repairs.

Error messages

When the CDJ-350 cannot operate normally, an error code appears on the display. Take the necessary measures, referring to the table below. If an

error code not indicated on the table below is displayed or if the same error code appears after the indicated action has been taken, contact your

store of purchase or nearby Pioneer service station.

Error code Error type

Description of error

Cause and action

E-7201

E-8301

E-8302

E-8303

E-8304

E-8305

TOC READ ERROR

TOC data cannot be read.

Disc is cracked.dReplace the disc.

Disc is dirty.dClean the disc.

If operation is normal with other discs, the problem is with that disc.

PLAYER ERROR

Disc that cannot be played normally is loaded.

DECODE ERROR

DATA FORMAT ERROR loaded.

Music files that cannot be played normally are

Format is wrong.dReplace with music files in the proper format.

Track recorded in the library, playlist, etc., has been

deleted from the USB device and cannot be played.

E-8306

NO FILE

Do not delete that track from the USB device.

Mechanical operation has not stopped within

specified time.

There is a foreign object in the disc insertion slot.dRemove the foreign

object.

E-9101

MECHANICAL TIME OUT

Download from Www.Somanuals.com. All Manuals Search And Download.

List of icons displayed on the main

unit display section

Cautions on use

Genre

Time

About condensation

Water droplets (condensation) may form inside the unit (on operating

parts and lenses) in the winter, for example, if the unit is moved from a

cold place into a warm room or if the temperature in the room in which

the unit is installed rises suddenly (through heating, etc.). The unit

will not operate properly and will not be playable with condensation

inside. Let the unit stand for 1 to 2 hours at room temperature (though

this time depends on the conditions of the condensation) without

turning on the power. The water droplets will evaporate and the unit

will become playable. Condensation can occur in the summer as well

if the unit is exposed to the direct wind from an air-conditioner, etc. If

this happens, move the unit to a different location.

Artist

Playback is not possible

Playing

Album

Track/file name

Playlist

Played

Remixer

Original artist

History

Folder

PC Control

Cleaning the lens

The player’s lens should not become dirty in normal use, but if for

some reason it should malfunction due to dust or dirt, consult your

nearest Pioneer authorized service center. Although lens cleaners

for players are commercially available, we advise against using them

since some may damage the lens.

List of MIDI Messages

MIDI Messages

(3 Bytes)

SW Name

Notes

Type

Linear value with respect to

speed from stop to x4 speed.

Stop: 40, FWD (CW) direction:

41 to 7F (x0.06 to x4 speed), REV

(CCW) direction: 3F to 00 (x0.5 to

x4 speed)

General

Purpose Bn

Controller

Jog dial

(scratch)

Handling discs

00 to 7F (00 at – side, 7F at +

side, 40 at center)

TEMPO

Linear value with respect to

speed from x0.5 speed to x4

speed. Stop (under x0.49 speed):

40, FWD (CW) direction: 41 to 7F

(x0.5 to x4 speed), REV (CCW)

direction: 3F to 00 (x0.5 to x4

speed)

Storing

General

Purpose Bn

Controller

Always place discs in their cases and store them vertically, avoid-

ing hot, humid places, places exposed to direct sunlight and

extremely cold places.

Jog dial (spin

outer section)

Be sure to read the cautions included with the disc.

98 – 127, 1 – 30 Difference of

count from previous time is sent

(±1 – ±30) When over ±30, set

at ±30

General

Purpose Bn

Controller

SELECT PUSH

(turn)

Cleaning discs

PLAY/PAUSE

Discs may not play if there are fingerprints or dust on them. In this

case, use a cleaning cloth, etc., to gently wipe the disc from the

inside towards the outside. Do not use dirty cleaning cloths.

OFF=00, ON=7F

CUE

OFF=00, ON=7F

SEARCH n

SEARCH m

TRACK

SEARCH p

TRACK

SEARCH o

LOOP IN/CUE

(HOT LOOP)

LOOP OUT

(OUT ADJUST)

OFF=00, ON=7F

Do not use benzene, thinner or other volatile chemicals. Also do

not use record spray or antistatic agents.

For tough dirt, apply some water to a soft cloth, wring out thor-

oughly, wipe off the dirt, then wipe off the moisture with a dry

cloth.

OFF=00, ON=7F

RELOOP/EXIT SW

TIME MODE

(AUTO CUE)

Do not use damaged (cracked or warped) discs.

DISPLAY (UTIL-

ITY)

TEMPO RANGE SW

MASTER

TEMPO

VINYL MODE SW

BEAT LOOP

(LOOP DIVIDE) +

BEAT LOOP

(LOOP DIVIDE) –

Jog dial (press

top)

OFF=00, ON=7F

Do not let the signal surface of discs get scratched or dirty.

Do not place two discs in the disc tray, one on top of the other.

Do not attach pieces of paper or stickers to discs. Doing so could

warp discs, making it impossible to play them. Also note that

rental discs often have labels attached to them, and the label’s

glue may have oozed out. Check that there is no glue around the

edges of such labels before using rented discs.

OFF=00, ON=7F

BPM LOCK

PLAYLIST

hDISC

OFF=00, ON=7F

BACK

SELECT PUSH

(press)

OFF=00, ON=7F

n is the channel number.

Download from Www.Somanuals.com. All Manuals Search And Download.

About specially shaped discs

Specially shaped discs (heart-shaped, hexagonal, etc.) cannot be

played on this player. Do not attempt to play such discs, as they could

damage the player.

Using the support site

Before making an inquiry about rekordbox operations and technical

support, refer to the operating instructions for rekordbox and check

the FAQs published on the support site for rekordbox.

rekordbox support site

http://www.prodjnet.com/rekordbox/support/

To make an inquiry about rekordbox, you need to register as a user in

advance on the support site for rekordbox.

You need to enter the license key for your user registration. Have

the license key ready. Also, be sure not to forget the login name

(your e-mail address) and the password specified for your user

registration, as well as the license key.

About condensation on discs

Water droplets (condensation) may form on the surface of discs if

they are moved from a cold place (particularly in winter) into a warm

room. Discs may not play normally if there is condensation on them.

Carefully wipe the water droplets off the surface of the disc before

loading it.

Pioneer Corporation collects your personal information for the

following purposes:

To provide customer support for your purchased product

To inform you of product or event information by e-mail

To reflect your opinions collected by survey on product planning

Disclaimer

— Your personal information is kept confidential corresponding to

the privacy policy set forth by our company.

Pioneer and rekordbox are trademarks or registered trademarks of

— You can check our privacy policy on the support site for

rekordbox.

the Pioneer Corporation.

Microsoft^®, Windows Vista^®, Windows^®and Internet Explorer^®

are registered trademarks or trademarks in the United States and

other countries of the Microsoft Corporation of the United States.

Apple, Macintosh, Mac OS, Safari, iTunes and Finder are reg-

istered trademarks of Apple Inc. in the United States and other

countries.

When making inquiries regarding rekordbox, please be sure to

furnish your computer type and specifications (CPU, installed

memory, other connected peripherals, etc.), the operating system

and version used, as well as concrete information regarding the

issue at hand.

— For an inquiry about configuring your computer with peripheral

devices other than our products and the corresponding

technical support, contact each manufacturer or retailer.

rekordbox is subject to upgrade for enhanced function and

performance. The upgrade program can be downloaded on the

support site. We strongly recommend you upgrade your software on

a regular basis to keep the latest updates on your system.

Pentium is a registered trademark of Intel Corporation.

Adobe and Reader are either registered trademarks or trademarks

of Adobe Systems Incorporated in the United States and/or other

countries.

ASIO is a trademark of Steinberg Media Technologies GmbH.

The names of companies and products mentioned herein are the

trademarks of their respective owners.

This product has been licensed for nonprofit use. This product has

not been licensed for commercial purposes (for profit-making use),

such as broadcasting (terrestrial, satellite, cable or other types

of broadcasting), streaming on the Internet, Intranet (a corporate

network) or other types of networks or distributing of electronic

information (online digital music distribution service). You need to

acquire the corresponding licenses for such uses. For details, visit

http://www.mp3licensing.com.

Specifications

Power requirements............................................................AC 120 V, 60 Hz

Power consumption .............................................................................. 16 W

Power consumption (standby)............................................................ 0.3 W

Main unit weight......................................................................2.3 kg (5.1 lb)

Max. dimensions................................220 mm (W) × 107 mm (H) × 288.5 mm (D)

(8.7 in. (W) × 4.2 in. (H) × 11.3 in. (D))

Tolerable operating temperature...................................... +5 °C to +35 °C

Tolerable operating humidity....................5 % to 85 % (no condensation)

Cautions on copyrights

rekordbox restricts playback and duplication of copyright-protected

music contents.

Analog audio output (AUDIO OUT L/R)

Output terminal.......................................................................RCA terminal

Output Level ....................................................................... 2.0 Vrms (1 kHz)

Frequency response .............................................................. 4 Hz to 20 kHz

S/N ratio...............................................................................................115 dB

Total harmonic distortion .................................................................0.006 %

When coded data, etc., for protecting the copyright is embedded in

the music contents, it may not be possible to operate the program

normally.

When rekordbox detects that coded data, etc., for protecting the

back, reading, etc.) may stop.

USB downstream section (USB)

Port.......................................................................................................Type A

Power supply...................................................................5 V/500 mA or less

Recordings you have made are for your personal enjoyment and

according to copyright laws may not be used without the consent of

the copyright holder.

USB upstream section (USB)

Port.......................................................................................................Type B

Music recorded from CDs, etc., is protected by the copyright laws

of individual countries and by international treaties. It is the full

responsibility of the person who has recorded the music to ensure

that it is used legally.

Control output (CONTROL)

Port.................................................................................................. Mini-jack

When handling music downloaded from the Internet, etc., it is the

full responsibility of the person who has downloaded the music to

ensure that it is used in accordance with the contract concluded

with the download site.

The specifications and design of this product are subject to change

without notice.

The articles concerning free repairs, etc., indicated on the warranty

do not apply to the rekordbox music management software. Before

installing or using rekordbox, carefully read the articles in Software

end user license agreement on page 9.

Download from Www.Somanuals.com. All Manuals Search And Download.

Pioneer Electronics(USA) Inc.

Limited Warranty

WARRANTY PERIOD

For the period specified below from the date of original purchase (the warranty period), Pioneer Electronics(USA) Inc. (Pioneer) warrants that the

products described below, if purchased directly from Pioneer or from an authorized Pioneer dealer or distributor in the United States and

installed and operated according to operating instructions enclosed with the unit, will be repaired or replaced with a unit of comparable value,

at the option of Pioneer, without charge to you for parts or labor for actual repair work if such products fail to function properly under normal use

due to a manufacturing defect. Parts supplied under this warranty may be new or rebuilt at the option of Pioneer.

PRODUCTS COVERED

MODEL PREFIX

WARRANTY PERIOD

Parts

Labor

DJ Compact Disc Player

CDJ, CMX .................................................................................... 1YEAR

DVJ .............................................................................................. 1YEAR

DMP ............................................................................................. 1YEAR

DJM ............................................................................................. 1YEAR

EFX .............................................................................................. 1YEAR

VSW ............................................................................................. 1YEAR

1YEAR

DJ DVD Player

Digital Media Player

DJ Mixer

DJ Effector

Video Switcher

This warranty covers the product during the warranty period whether in the possession of the original owner or any subsequent owner.

WHAT’S NOT COVERED

This warranty does not cover the A-B Cross Fader in the DJ Mixer (model prefix DJM). This warranty does not cover any appearance item, any

damage to the product resulting from alterations, modifications not authorized in writing by Pioneer, accident, misuse or abuse, damage due to

lightning or to power surges or personal injury due to excessive sound pressure levels. This warranty does not cover the cost of parts or labor

which would be otherwise provided without charge under this warranty, obtained from any source other than a Pioneer Authorized Service

Company or other designated location. This warranty does not cover defects or damage caused by the use of unauthorized parts or labor, or

from improper maintenance.

PRODUCTS WITH ALTERED, DEFACED OR REMOVED SERIAL NUMBERS SHALL VOID THIS WARRANTY.

YOUR RIGHTS

SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE

FOLLOWING LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.

THE ABOVE WARRANTIES ARE IN LIEU OF AND EXCLUDE ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING

WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR ANY PARTICULAR PURPOSE. IN NO

EVENT SHALL PIONEER BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF LOSS OF USE OR

CLAIMS ASSERTED ON THE BASIS OF TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE.

TO OBTAIN SERVICE

Pioneer has appointed a number of Authorized Industrial Service Companies throughout the U.S.A. should your product ever require service. To

receive warranty service you will need to present your sales receipt or, if rented, your rental contract showing place and date of original

purchase transaction.

Should it become necessary to ship the unit, you will need to package the product and send it, transportation prepaid, to an Authorized Service

Company in the U.S.A. Carefully package the product using adequate padding material to prevent damage in transit. The original container is

ideal for this purpose. Include in the package your name, address, telephone number where you can be reached during business hours, a copy

of your sales receipt, and a detailed description of the problem.

To find the name and address of the nearest Pioneer Authorized service location, to obtain warranty service or for additional information about

this warranty. please call or write:

PIONEER ELECTRONICS(USA) INC.

CUSTOMER SUPPORT DIVISION

P.O. BOX 1760

LONG BEACH, CALIFORNIA 90801-1760

1-800-872-4159

DO NOT RETURN ANY PRODUCT TO ABOVE ADDRESS. IT IS NOT A SERVICE LOCATION.

TO ORDER REPLACEMENT PARTS CALL 800-228-7221

RECORD THE PLACE AND DATE OF PURCHASE FOR FUTURE REFERENCE

Model No.

Serial No.

Purchase Date

Purchased From

KEEP THIS INFORMATION AND YOUR SALES RECEIPT IN A SAFE PLACE

Download from Www.Somanuals.com. All Manuals Search And Download.

To register your product, find the nearest authorized service location, to

purchase replacement parts, operating instructions, or accessories,

please go to one of following URLs :

Pour enregistrer votre produit, trouver le service après-vente agréé le plus

proche et pour acheter des pièces de rechange, des modes d’emploi ou

des accessoires, reportez-vous aux URL suivantes :

In the USA/Aux Etats-Unis

http://www.pioneerelectronics.com

In Canada/Aux Canada

http://www.pioneerelectronics.ca

S018_B1_EnFr

Published by Pioneer Corporation.

PIONEER CORPORATION

1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan

PIONEER ELECTRONICS (USA) INC.

P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404

PIONEER ELECTRONICS OF CANADA, INC.

340 Ferrier Street, Unit 2, Markham, Ontario L3R 2Z5, Canada TEL: 1-877-283-5901, 905-479-4411

K002_PSV_CU

Printed in

<DRB1507-E>

Download from Www.Somanuals.com. All Manuals Search And Download.

Paxar Printer Monarch 7411 User Manual
Peavey Recording Equipment Equinox User Manual
Pelco Security Camera AD2088 User Manual
Perlick Beverage Dispenser H Series User Manual
Philips Blender HR1370 User Manual
Philips DVD Player DVD625 User Manual
Philips Electric Toothbrush HX6410 User Manual
Piratecom Intercom System C40 User Manual
Polycom Webcam HA7250QT4 User Manual
ProForm Treadmill PFTL731052 User Manual