Pioneer Blu ray Player BDP LX 70 User Manual

Operating Instructions  
Blu-ray Disc PLAYER  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This product complies with the Low Voltage Directive  
(73/23/EEC, amended by 93/68/EEC), EMC Directives  
(89/336/EEC, amended by 92/31/EEC and  
If the AC plug of this unit does not match the AC  
outlet you want to use, the plug must be removed  
and appropriate one fitted. Replacement and  
mounting of an AC plug on the power supply cord of  
this unit should be performed only by qualified  
service personnel. If connected to an AC outlet, the  
cut-off plug can cause severe electrical shock. Make  
sure it is properly disposed of after removal.  
93/68/EEC).  
D3-4-2-1-9a_En  
This product is for general household purposes. Any  
failure due to use for other than household purposes  
(such as long-term use for business purposes in a  
restaurant or use in a car or ship) and which  
The equipment should be disconnected by removing  
the mains plug from the wall socket when left  
unused for a long period of time (for example, when  
on vacation).  
D3-4-2-2-1a_A_En  
requires repair will be charged for even during the  
warranty period.  
K041_En  
POWER-CORD CAUTION  
Handle the power cord by the plug. Do not pull out the  
plug by tugging the cord and never touch the power  
cord when your hands are wet as this could cause a  
short circuit or electric shock. Do not place the unit, a  
piece of furniture, etc., on the power cord, or pinch the  
cord. Never make a knot in the cord or tie it with other  
cords. The power cords should be routed such that they  
are not likely to be stepped on. A damaged power cord  
can cause a fire or give you an electrical shock. Check  
the power cord once in a while. When you find it  
This product incorporates copyright protection  
technology that is protected by method claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection  
technology must be authorized by Macrovision  
Corporation, and is intended for home and other limited  
viewing uses only unless otherwise authorized by  
Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
damaged, ask your nearest PIONEER authorized  
service center or your dealer for a replacement. S002_En  
If you want to dispose this product, do not mix it with general household waste. There is a separate collection system for used  
electronic products in accordance with legislation that requires proper treatment, recovery and recycling.  
Private households in the member states of the EU, in Switzerland and Norway may return their used electronic products free of charge to  
designated collection facilities or to a retailer (if you purchase a similar new one).  
For countries not mentioned above, please contact your local authorities for the correct method of disposal.  
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery and recycling and thus prevent potential  
negative effects on the environment and human health.  
K058_A_En  
For U.K model:  
Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified  
service personnel.  
IMPORTANT: THE MOULDED PLUG  
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 10 amp fuse is fitted in this plug. Should the  
fuse need to be replaced, please ensure that the replacement fuse has a rating of 10 amps and that it is approved by ASTA or BSI to BS1362.  
Check for the ASTA mark  
or the BSI mark  
on the body of the fuse.  
If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover the plug  
must not be used until a replacement cover is obtained. A replacement fuse cover can be obtained from your local dealer.  
If the fitted moulded plug is unsuitable for your socket outlet, then the fuse shall be removed and the plug cut off and disposed of  
safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.  
If a new plug is to be fitted, please observe the wiring code as shown below. If in any doubt, please consult a qualified electrician.  
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:  
Blue : Neutral Brown : Live  
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in  
your plug, proceed as follows ;  
The wire which is coloured BLUE must be connected to the terminal which is marked with the  
letter N or coloured BLACK.  
The wire which is coloured BROWN must be connected to the terminal which is marked with the  
letter L or coloured RED.  
How to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse.  
D3-4-2-1-2-2_B_En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
01 Before you start  
05 Using the Disc Navigator  
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Putting the batteries in the remote control. . . . . . . . . . . . . . . . . . 6  
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Disc/content format playback compatibility . . . . . . . . . . . . . . . . . 6  
File compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Titles and chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
DVD-Video regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
BD-ROM regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Movie Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Photo Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Music Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
06 Using the Home Media Gallery  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
About network playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
Using the Home Media Gallery . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Movie Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Photo Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33  
Music Navigator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
About Windows Media Connect . . . . . . . . . . . . . . . . . . . . . . . . .36  
02 Connecting up  
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Easy connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Using other types of video output. . . . . . . . . . . . . . . . . . . . . . . . 10  
Connecting for HDMI output . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Connecting using the component video output . . . . . . . . . . . . . 12  
Changing the output video resolution . . . . . . . . . . . . . . . . . . . . 12  
Connecting using an S-Video output . . . . . . . . . . . . . . . . . . . . . 13  
Connecting for surround sound . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Network connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Controlling this player via another Pioneer component . . . . . . . 14  
Using an external IR receiver with this player. . . . . . . . . . . . . . . 14  
07 Video/Audio Adjust menu  
Video Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
Audio Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38  
08 Initial Setup menu  
Using the Initial Setup menu. . . . . . . . . . . . . . . . . . . . . . . . . . . .39  
About the audio output settings . . . . . . . . . . . . . . . . . . . . . . . . .42  
Speaker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43  
03 Controls and displays  
Front panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Front panel display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
09 Additional information  
Taking care of your player and discs . . . . . . . . . . . . . . . . . . . . . .44  
Screen sizes and disc formats. . . . . . . . . . . . . . . . . . . . . . . . . . .45  
Resetting the player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45  
Setting up the remote to control your TV . . . . . . . . . . . . . . . . . . .45  
TV Preset code list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46  
BD/DVD language code list. . . . . . . . . . . . . . . . . . . . . . . . . . . . .47  
BD/DVD country/area code list . . . . . . . . . . . . . . . . . . . . . . . . . .47  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48  
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53  
License . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63  
04 Getting Started  
Switching on and setting up . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Using the on-screen displays . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Setting up for network use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Playing movies, music and photos. . . . . . . . . . . . . . . . . . . . . . . 20  
Playing BD/DVD movies and audio CD . . . . . . . . . . . . . . . . . . . 20  
Playback controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Frequently Asked Questions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
4
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
01  
Chapter 1  
Before you start  
Features  
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or  
registered trademarks of HDMI Licensing LLC.  
BD-ROM playback  
Blu-ray Disc is a next-generation video disc format featuring far  
higher disc capacity than conventional DVD. The higher capacity  
makes a whole range of new and enhanced features possible, such  
as support for high-definition video up to 1920 x 1080 pixels, high  
quality, surround sound audio, greater interactivity and richer  
content.  
HDMI Control  
By connecting this unit to a Pioneer plasma television, AV system  
(amplifier or AV receiver etc.), or HD AV Converter with an HDMI  
cable, you can control this unit from the connected plasma  
television, AV system or HD AV Converter, as well as have the  
connected plasma television, AV system or HD AV Converter  
automatically change inputs in response to this unit starting  
playback or having the GUI screen (ex. Disc Navigator) displayed  
(known as the Auto-select function). The connected plasma  
television can there by have its power turned from off to on by this  
function.  
BD-ROM discs are commercially produced discs (Video Distribution  
format) that can contain movie and other video content, interactive  
content, enhanced menu features such as pop-up menus (press  
POPUP MENU/MENU during playback for these), full-colour, high-  
definition animated buttons and animated menu transition effects,  
button sounds (sounds are played when menu buttons are selected  
or activated), high-definition bitmap subtitles supporting full-colour  
images with frame-accurate animation effects up to full video frame  
rate, and so on.  
You can also have this unit turn on automatically when you control  
this unit from a connected plasma television is turned on  
(Simultaneous power function).  
Additionally, when the language information from a connected  
plasma television is received, you can have this unit’s on-screen  
display language change automatically to that of the plasma  
television (only when playback is stopped and GUI screen is not  
displayed).  
While BD capacity is enough for most applications, the BD-ROM  
standard allows for content to be spread across several discs,  
removing the limit of one physical disc. Follow the on-screen  
instructions during playback when using these special kinds of  
discs.  
Refer to your plasma television’s operating manual for more  
information regarding how your plasma television transmits  
language information.  
BD-J application  
For more information about which operations can be carried out by  
connecting via HDMI cable, refer to the operating manual for your  
plasma television, AV system or HD AV Converter.  
PureCinema  
When you playback film material (24 frames/second) on a BD-ROM  
or DVD-video disc, the progressive scan line automatically converts  
the film material to optimum quality (see PureCinema on page 37).  
The BD-ROM specification supports Java for interactive content.  
The Java specification for BD-ROM is known as BD-J. This allows  
content providers to put games and other interactive material linked  
to specific titles on to BD-ROM discs. (This player does not support  
downloadable BD-J content, direct connection to the Internet or the  
retrieval of content through the Internet.)  
1080/50p, 1080/60p and 1080/24p output video  
This player supports a variety of output video resolutions, up to  
1080 lines/50 or 60 frames per second, progressive (HDMI only),  
making it ideal for playing high-definition Blu-ray Discs.  
High quality audio  
Java and all Java-based trademarks and logos are trademarks or registered  
trademarks of Sun Microsystems, Inc. in the U.S. and other countries.  
© 2000-2007 Esmertec AG  
Esmertec and Jbed are trademarks and/or registered trademarks of Esmertec AG.  
Connect to a local area network  
Connect this player to one or more computers in your house via  
Ethernet and use them as media servers, streaming audio, video  
and still image files for playback on your TV and/or audio system.  
Blu-ray supports DTS, DTS-HD (DTS-HD is played back as DTS),  
Dolby Digital, Dolby Digital Plus, Dolby TrueHD (Dolby TrueHD is  
played back as Dolby Digital) and Linear PCM audio in up to eight  
channels (up to two channels for 24-bit/192 kHz audio). Connect this  
player to a surround-sound AV receiver for a true home theater  
experience.  
HDMI digital interface  
The HDMI (High-Definition Multimedia Interface) interconnect  
provides high quality digital audio and video, all from a single user-  
friendly connector. HDMI is the first consumer electronics interface  
to support uncompressed standard, enhanced, or high-definition  
video plus standard to multi-channel surround sound audio, all  
using one interface. You can easily connect to an HDMI-equipped  
AV receiver or audio-visual device for high quality audio and video.  
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D  
symbol are trademarks of Dolby Laboratories.  
• “DTS” and “DTS Digital Surround” are registered trademarks of DTS, Inc.  
5
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
01  
Before you start  
• When disposing of used batteries, please comply with  
governmental regulations or environmental public instruction’s  
rules that apply in your country/area.  
Movie file playback  
Video files encoded in the WMV (Windows Media* Video), MPEG-1/2  
formats are playable from DVD-R/-RW, or from a connected media  
server.  
WARNING  
Do not use or store batteries in direct sunlight or  
other excessively hot place, such as inside a car or  
near a heater. This can cause batteries to leak,  
overheat, explode or catch fire. It can also reduce the  
Music file playback  
This player supports various audio formats, including WMA  
(Windows Media* Audio), MP3 and WAV. You can play files stored  
on DVD-R/-RW, or from a connected media server.  
life or performance of batteries.  
D3-4-2-3-3_En  
Photo file playback  
PNG, GIF and JPEG image files — including the popular EXIF format  
used by most digital cameras to store picture shooting information  
together with the JPEG image — are playable from DVD-R/-RW, or  
from a connected media server.  
Using the remote control  
Please keep in mind the following when using the remote control:  
• Make sure that there are no obstacles between the remote and  
the remote sensor on the unit.  
* “Windows Media™” is a trademark of Microsoft Corporation.  
• The remote has a range of about 7 m (at an angle of 30º from  
either side of the sensor). Use within this range in front of the  
remote control sensor on the front panel.  
This product includes technology owned by Microsoft Corporation and cannot be  
used or distributed without a license from Microsoft Licensing, Inc.  
• Remote operation may become unreliable if strong sunlight or  
fluorescent light is shining on the unit’s remote sensor.  
What’s in the box  
• Remote controllers for different devices can interfere with each  
other. Avoid using remotes for other equipment located close to  
this unit.  
Please confirm that the following accessories are in the box along  
with these operating instructions when you open it:  
• Remote control  
• Replace the batteries when you notice a fall off in the operating  
range of the remote.  
• AA/R6P dry cell batteries x2  
• Stereo audio cable (red/white plugs)  
• Video cable (yellow plugs)  
• HDMI cable  
• When the batteries run down or you change the batteries, the TV  
preset codes are automatically reset. See Resetting the player on  
page 45 to reset them.  
• LAN cable  
• Power cable  
Disc/content format playback  
compatibility  
• Warranty card  
Putting the batteries in the remote  
control  
General disc compatibility  
This player is compatible with a range of disc types (media) and  
formats. Compatible discs will usually feature one of the following  
logos on the disc and/or disc packaging. Note however that some  
disc types, such as recordable BD, DVD or CD, may be in an  
unplayable format — see below for further compatibility  
information.  
Insert two AA/R6P batteries into the battery compartment  
following the indications (,) inside the compartment.  
Blu-ray Disc (BD)  
Important  
DVD-Video  
DVD-R  
DVD-R DL  
DVD-RW  
Incorrect use of batteries can result in hazards such as leakage and  
bursting. Please observe the following:  
• Don’t mix new and old batteries together.  
• Don’t use different kinds of batteries together — although they  
may look similar, different batteries may have different voltages.  
• Make sure that the plus and minus ends of each battery match  
the indications in the battery compartment.  
“Blu-ray Disc” and  
are trademarks.  
• Remove batteries from equipment that isn’t going to be used for  
a month or more.  
is a trademark of DVD Format/Logo Licensing Corporation.  
• This player may not be able to play perfectly every disc that  
features one of the logos listed above. Please contact Pioneer if  
you find a disc that won’t play properly.  
6
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before you start  
01  
File compatibility  
Important  
• Compatible media: DVD-R, DVD-RW, media server on network  
(some formats may not be supported depending on the media  
server type).  
• This player is not compatible with BD-R/-RE (Blu-ray Disc  
Recordable Format Ver. 1 and Blu-ray Disc Recordable Format  
Ver. 2), DVD-R/-RW (VR mode), DVD-Audio, DVD-RAM, CDs  
(with PC files) or disc types other than those listed above.  
• Even when they are in a supported format, some files may not  
play or display depending on the content.  
• Do not use 8 cm disc adapters with this player. 8 cm discs can  
be played directly by placing then in the 8 cm disc depression in  
the center of the disc tray.  
• Even when playing a supported format, some functions may not  
operate properly depending on the content.  
• DRM-protected contents on DVD-R/-RW discs or on media  
servers that do not support WMDRM, and otherwise  
incompatible files are skipped.  
BD-ROM compatibility  
• BD-ROM discs should conform to the BD-ROM Profile1.  
• Please note, the following file naming structure needs to be  
adhered to when creating/renaming any digital media to be  
played on the unit (either through computer-created disc media,  
or the Home Media Gallery connection). This disclaimer does  
not apply to any media purchased at retail locations:  
Due to the coding system used, this player will only read/play  
files named using standard alphanumeric characters. Any other  
characters or symbols (e.g. characters with accents) used in  
naming the file will render it unreadable/unplayable by the unit.  
If you encounter any difficulties with playback of media, please  
rename the file in accordance to this standard.  
• If a disc containing DTS-HD audio is played, this player is only  
compatible with bitstream output or playback decoding of  
current DVD (DTS) material (sampling rate: 48 kHz max., 5.1ch).  
• If a disc containing Dolby TrueHD audio is played, this player is  
only compatible with bitstream output or playback decoding of  
current DVD (Dolby Digital) material (sampling rate: 48 kHz  
max., 5.1ch).  
• This player cannot play 8 cm BD-ROM discs.  
DVD-R/-RW compatibility  
• This player is compatible with DVD-R/-RW discs recorded in  
DVD-Video format.  
Supported video formats  
• DVD-R/-RW discs containing PC data can also be played. See  
below for file compatibility.  
Windows Media Video 9 (WMV9)  
– MP@HL  
• Unfinalized DVD-R/-RW discs and VR mode DVD-R/-RW discs  
cannot be played in this player.  
Windows Media Video 9 (WMV9) Advanced Profile (VC-1)  
– AP@L3  
MPEG-2 (PS/TS)  
– MP@HL  
PC-created disc compatibility  
Discs recorded using a personal computer may not be playable in  
this unit due to the settings of the application software used to  
create the disc. Check with the software publisher for more detailed  
information.  
MPEG-1  
Supported audio formats  
CD-R/-RW/-ROM compatibility  
• This player does not support the playback of CD-R/-RW discs.  
Windows Media Audio 9 (WMA9)  
– Bit rate:up to 192 kbps (constant bit-rate (CBR));  
up to 384 kbps (variable bit-rate (VBR))  
– Sampling rates: 44.1 kHz or 48 kHz  
• PC files stored on CDs cannot be played back.  
• CD-R/-RW discs that are not finalized cannot be played back.  
Windows Media Audio 9 Pro (WMA9 PRO)  
– Bit rate: up to 768 kbps  
• Regarding copy protected CDs: This product is designed to  
conform to the specifications of the audio CD format. This player  
does not support the playback or function of discs that do not  
conform to these specifications.  
– Sampling rates: 44.1 kHz or 48 kHz  
– Channels: up to 5.1ch  
MPEG-1 Audio Layer 3 (MP3)  
– Sampling rates: 32 kHz, 44.1 kHz or 48 kHz  
– Bit rate: up to 320 kbps  
DualDisc playback  
A DualDisc is a new two -sided disc, one side of which contains DVD  
content –video, audio, etc. –while the other side contains non-DVD  
content such as digital audio material.  
Linear PCM (WAVE)  
– Sampling rates: 44.1 kHz or 48 kHz  
The DVD side of a DualDisc will play in this product (excluding any  
DVD-Audio content).  
Supported image formats  
The non-DVD, audio side of the disc is not compatible with this  
player.  
JPEG  
It is possible that when loading or ejecting a DualDisc, the opposite  
side to that being played will be scratched. Scratched discs may not  
be playable.  
– Baseline JPEG and progressive JPEG/Exif are supported  
– Resolution: up to 4096 x 4096 pixels  
PNG  
For more detailed information on the DualDisc specification, please  
refer to the disc manufacturer or disc retailer.  
– Resolution: up to 4096 x 4096 pixels  
GIF  
– Resolution: up to 4096 x 4096 pixels  
7
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
01  
Before you start  
File extensions  
The following file extensions should be used with this player:  
DVD-Video regions  
All commercially produced DVD movies (DVD-Video discs) carry a  
region mark on the case somewhere that indicates which region(s)  
of the world the disc is compatible with. This player also has a region  
mark, which you can find on the rear panel. Discs from incompatible  
regions will not play in this player. Discs marked ALL will play in any  
player.  
Video  
.wmv .mpg .mpeg  
Audio  
.wma .mp3 .wav  
Image  
.jpg .jpeg .png .gif  
The diagram below shows the various DVD regions of the world.  
Even when files have a supported file extension, some files may not  
play or display depending on the content or media server type.  
1
5
2
1
6
2
3
4
5
Titles and chapters  
2
BD and DVD movie discs are divided into one or more titles. Titles  
may be further subdivided into chapters.  
4
This player is REGION 2.  
Title 1  
Title 2  
Title 3  
BD-ROM regions  
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2  
Like DVD movies, BD movie discs (BD-ROM) also carry a region  
mark that indicates which region(s) of the world the disc is  
compatible with. This player also has a region mark, which you can  
find on the rear panel. Discs from incompatible regions will not play  
in this player. Discs marked ALL will play in any player.  
The diagram below shows the various BD-ROM regions of the world.  
REGION A  
REGION B  
REGION C  
This player is REGION B.  
8
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting up  
02  
CChoaptnern2 ecting up  
Rear panel  
1
2
3
4
5
6
7
8
9
CONTROL  
IN  
IN  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
AC IN  
Y
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
DIGITAL AUDIO OUT  
P
B
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(10/100)  
R
P
R
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
10 11  
1
AC IN  
8
AUDIO OUT (5.1ch)  
Connect the supplied power cord here, then plug into a power  
outlet.  
Multi-channel (5.1ch) analog audio outputs for connection to an AV  
receiver with multi-channel analog audio inputs (page 13).  
2
CONTROL IN  
9
AUDIO OUT (2ch)  
Use to control this player from the remote sensor of another Pioneer  
component with a CONTROL OUT terminal and bearing the  
mark. Connect the CONTROL OUT of the other component to the  
CONTROL IN of this player using a mini-plug cord (page 14).  
Stereo analog audio outputs for connection to your TV, AV receiver  
or stereo system (page 10).  
10 IR IN  
Jack for an external IR (infrared) remote control receiver (page 14).  
3
HDMI OUT  
11 IR RECEIVER switch  
Switch to the setting compatible with your external IR remote  
control receiver (page 14).  
HDMI output providing a high quality interface for digital audio and  
video (page 11).  
4
LAN (10/100)  
Ethernet port for 10BASE-T (10 Mbps) or 100BASE-TX (100 Mbps)  
network connection (page 14).  
Tip  
• When connecting this player to your TV, AV receiver or other  
equipment, make sure that all components are switched off  
and unplugged.  
5
VIDEO OUT and S-VIDEO OUT  
Video output (composite) that you can connect to your TV or AV  
receiver using the supplied video cable (page 10).  
• You may find it useful to have the manuals supplied with your  
other components handy when connecting this player.  
S-Video output that you can use instead of the VIDEO OUT jacks  
(page 13).  
6
COMPONENT VIDEO OUT  
High quality video output for connection to a TV, monitor or AV  
receiver that has component video inputs.  
Connect using a commercially available three-way component video  
cable (page 12).  
7
DIGITAL AUDIO OUT – COAXIAL/OPTICAL  
Digital audio outputs for connection to a PCM, Dolby Digital, and/or  
DTS-compatible AV receiver (page 13).  
9
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
02  
Connecting up  
Easy connections  
L
R
AUDIO IN  
VIDEO IN  
TV  
CONTROL  
IN  
VIDEO OUT  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
AC IN  
Y
IN  
CENTER SURROUND FRONT  
L
O OUT  
L
DIGITAL AUDIO OUT  
P
B
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(10/100)  
R
P
R
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
AUDIO OUT  
To power outlet  
This is a basic setup that allows you to watch discs on your TV using  
just the cables supplied.  
Using other types of video output  
This player has standard (composite), S-Video and component video  
outputs, as well as an HDMI connector (for digital video/audio).  
Important  
In order to be able to watch HD (high definition) BDs at their full  
resolution, you should connect the player to your TV using either the  
component video output, or (even better) the HDMI output.  
• This player is equipped with copy protection technology. Do not  
connect this player to your TV via a VCR using AV cables, as the  
picture from this player will not appear properly on your TV. (This  
player may also not be compatible with some combination TV/  
VCRs for the same reason; refer to the manufacturer for more  
information.)  
An HDMI connection will additionally give you HD output when  
watching DVDs.  
If your display has neither of these connection types, an S-Video jack  
is also provided, which should give slightly better video quality than  
using the standard video output.  
• Do not unplug the player from the power outlet while it is  
switched on.  
• Do not plug this player into a switched power supply found on  
some amplifiers and AV receivers.  
1
Connect the VIDEO OUT and one pair of AUDIO OUT jacks  
to a set of audio/video inputs on your TV.  
Use the supplied red/white stereo audio and yellow video cables.  
Make sure you match up the left and right audio outputs with their  
corresponding inputs for correct stereo sound.  
See Using other types of video output below if you want to use a  
different type of connection.  
2
Connect the supplied AC power cord to the AC IN inlet,  
then plug into a power outlet.  
10  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting up  
02  
Use an HDMI cable (supplied) to connect the HDMI OUT  
Connecting for HDMI output  
interconnect on this player to an HDMI interconnect on an  
HDMI-compatible display.  
If you have an HDMI or DVI (with HDCP) equipped monitor or  
display, you can connect it to this player using a commercially  
available HDMI cable.  
The HDMI connector outputs uncompressed digital video, as well as  
most digital audio formats.  
HDMI IN  
Important  
• This unit has been designed to be compliant with HDMI (High-  
Definition Multimedia Interface). Depending on the component  
you have connected, using a DVI connection may result in  
unreliable signal transfers.  
HDMI-compatible display  
CONTROL  
IN  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
• If you change the display connected to the HDMI output, you will  
also need to change the Output Video Resolution settings to  
match the new display (see Changing the output video resolution  
on page 12 to do this).  
Y
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
DIGITAL AUDIO OUT  
P
B
SETTING  
SETTING  
2
1
LAN(10/100)  
R
P
R
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
• The HDMI connection is compatible with 8-channel linear PCM  
1
signals (44.1 kHz to 192 kHz , 16 bit/20 bit/24 bit), Dolby Digital  
bitstream and DTS (5.1 channel signals) bitstream.  
• The arrow on the cable connector body should be face up for  
correct alignment with the connector on the player.  
• Depending on the HDMI cable being used, 1080p output may  
not appear correctly.  
• If you connect a DVI device to the HDMI output of this player,  
ensure that it is compliant with High-bandwidth Digital Content  
Protection (HDCP). If you choose to connect to a DVI connector,  
you will need a separate adaptor (DVIHDMI) to do so. A DVI  
connection, however, does not support audio signals. Consult  
your local audio dealer for more information.  
After switching on the player you may need to set the output video  
resolution and HDMI colour space for compatibility with your  
display. See Changing the output video resolution on page 12 and  
HDMI Color Space in Using the Initial Setup menu on page 39.  
About HDMI  
HDMI supports both standard and high-definition video, plus  
standard and multi-channel surround-sound audio. HDMI features  
include uncompressed digital video, one connector (instead of  
several cables and connectors), and communication between the  
AV source and AV devices such as DTVs.  
HDMI was developed to provide the technologies of High-bandwidth  
Digital Content Protection (HDCP) as well as Digital Visual Interface  
(DVI) in one specification. HDCP is used to protect digital content  
transmitted and received by DVI-compliant displays.  
About HDMI Control  
You can enable HDMI Control by turning the HDMI Control setting  
to On for all components connected via HDMI cable. Check the  
video output from this unit once you have completed making  
connections and settings for all components. You will need to check  
the video output each time you change connected components or  
remove the HDMI cable.  
Note  
1 192 kHz output is limited to 2 channels.  
11  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
02  
Connecting up  
*6  
For resolutions that cannot be output by component output, video is output in the  
Connecting using the component  
video output  
following resolutions:  
PAL: 576/50i  
NTSC: 480/60i  
You can use the component video output instead of the standard  
video out jack to connect this player to your TV (or other equipment).  
Note  
Use a component video cable (not supplied) to connect the  
• Depending on your display, some of the settings may result in  
the picture disappearing. In this case, press OUTPUT  
RESOLUTION repeatedly until the picture re-appears.  
COMPONENT VIDEO OUT jacks to a component video input on  
your TV, monitor or AV receiver.  
Be careful to match up the colours of the three jacks for correct  
connection.  
• 720/50p, 1080/50i, 1080/50p, 1080/60p and 1080/24p output is  
only compatible with HDMI displays. They are not compatible  
with the component video output.  
Y
• When Output Video Resolution is set to 720p, 1080i or 1080p,  
video is output in 16:9 format even if TV Aspect Ratio is set to 4:3  
(Standard). See TV Aspect Ratio on page 39.  
PB  
PR  
• If the contours of the displayed subjects look jagged or blurred,  
try setting the Output Video Resolution to 576i/480i. (If you  
connected this player to your TV with the HDMI connection and  
the picture disappears when you switch the Output Video  
Resolution to 576i/480i, use the component connection with the  
576i/480i Output Video Resolution or S-Video, the standard  
composite connection instead.)  
COMPONENT  
VIDEO IN  
TV  
CONTROL  
IN  
• Note that when using a Component Video connection with a TV  
or other AV component (not using HDMI), 480/60i video may be  
output in 480/60p, and 576/50i video may be output in 576/50p.  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
Y
IN  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
UT  
P
B
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(10/100)  
R
P
R
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
OTICAL  
24p output  
For smooth presentation of 1080/24p or 720/24p video with an  
HDMI-equipped display compatible with 1080/24p input, set 24p  
Direct Out on this player to On (see page 39).  
This player will output 1080/24p video over HDMI in the following  
cases:  
Changing the output video resolution  
Use the OUTPUT RESOLUTION button located on both the front  
panel and the remote control to switch the output video resolution  
for the HDMI and component video outputs.  
• 1080/24p video: When the Output Video Resolution is set to  
Auto or Source Direct.  
• 720/24p video: When the Output Video Resolution is set to Auto.  
The table below shows the output settings.  
TV  
system  
Component  
output  
Video/S-Video  
output  
Note  
Setting  
HDMI output  
• Even when 24p Direct Out is set to On, if a TV not compatible with  
1080/24p video is connected, the actual frame frequency of the  
video output will be 60 Hz.  
AUTO PAL  
NTSC  
TV’s preferred TV’s preferred 576/50i  
resolution *3,5 resolution *6  
480/60i  
• The video output will be interrupted when switching the video  
output from 1080/24p or 720/24p to other output video  
resolutions, or when switching to 1080/24p or 720/24p from  
other output video resolutions.  
576i or PAL  
480i NTSC 480/60i  
576/50i  
576/50i  
480/60i  
576/50i  
480/60i  
576p or PAL  
576/50p  
576/50p  
480/60p  
576/50i  
480/60i  
480p  
NTSC 480/60p  
720p  
PAL 720/50p  
NTSC 720/60p  
576/50i  
720/60p *1,2  
576/50i  
480/60i  
1080i  
PAL  
1080/50i  
576/50i  
1080/60i *1,2  
576/50i  
480/60i  
NTSC 1080/60i  
1080p PAL  
1080/50p  
576/50i  
480/60i  
576/50i  
480/60i  
NTSC 1080/60p  
Source PAL  
Direct NTSC  
Dependent on Dependent on 576/50i  
source *3,5  
source *2,4,5  
480/60i  
*1  
Video output is 480i during copy protected DVD-Video playback.  
Video output during BD-ROM playback is 576i/480i depending on the disc.  
Refer to 24p output below for conditions.  
*2  
*3  
*4  
*5  
The frame frequency for 1080/24p is still 60 Hz.  
The video output will be interrupted when switching the video output.  
12  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting up  
02  
Optical connection: Use an optical cable (not supplied) to connect  
the DIGITAL AUDIO OUT – OPTICAL jack to an optical input on  
your AV receiver.  
Connecting using an S-Video output  
You can use the S-Video output instead of the VIDEO OUT jack to  
connect this player to your TV (or other equipment).  
• When inserting the plug, the protective shutter will open and  
you should hear the plug click into position when fully inserted.  
Take care not to force the plug as this may damage the shutter,  
the cable and/or the player.  
Use an S-Video cable (not supplied) to connect the S-VIDEO  
OUT to an S-Video input on your TV, monitor or AV receiver.  
Line up the small triangle above the jack with the same mark on the  
plug before plugging in.  
Coaxial connection: Use a coaxial cable (not supplied) to connect  
the DIGITAL AUDIO OUT – COAXIAL jack to a coaxial input on your  
AV receiver.  
S-VIDEO  
IN  
Note  
• Linear PCM audio output over the DIGITAL AUDIO OUT jacks is  
limited to 2ch, 48 kHz.  
TV  
Analog connections  
Connect the AUDIO OUT (5.1ch) jacks on this player to the  
multi-channel analog inputs on your AV receiver.  
Use a dedicated six-way cable (not supplied), or three sets of stereo  
cables (not supplied) to connect the six channels.  
CONTROL  
IN  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
Y
IN  
CENTER SURROUND FRONT  
L
EO OUT  
L
DIGITAL AUDIO OUT  
P
B
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(10/100)  
Check carefully that each channel is connected to its corresponding  
channel on the AV receiver.  
R
P
R
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
After connecting, you can make settings for the number of speakers  
connected to your system — see the Speakers section of the Initial  
Setup menu on page 41 and Speaker Setup on page 43.  
Connecting for surround sound  
AUDIO IN  
(5.1ch)  
This player offers both analog and digital connections for surround  
sound. The digital outputs (coaxial and optical) provide a convenient  
way to connect this player to an AV receiver with built-in Dolby  
Digital and/or DTS decoders. The 5.1ch analog outputs can be used  
to connect to an AV receiver with multi-channel analog audio inputs.  
CENTER SURROUND FRONT  
L
R
SUB WOOFER  
AV receiver  
Check the operating instructions that came with your AV receiver for  
more on these connections.  
Digital connections  
CONTROL  
IN  
Connect one of the DIGITAL AUDIO OUT jacks on this player  
IR  
O OU
.1ch)  
DIO OUT  
(2ch)  
to a digital input on your AV receiver.  
Y
IN  
ENTSURROUFRONT  
VIDEO OUT  
L
DIGITAL AUDIO OUT  
P
B
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(10/100)  
DIGITAL  
AUDIO IN  
R
P
R
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
COAXIAL  
OPTICAL  
AV receiver  
CONTROL  
IN  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
Y
IN  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
AL AUDIO
P
B
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(10/100)  
R
P
R
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
13  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
02  
Connecting up  
Network connection  
Controlling this player via another  
Pioneer component  
This player can be connected to a local area network (LAN) via the  
Ethernet port on the rear panel.  
The CONTROL IN jack allows you to control this player via the  
remote control sensor of another Pioneer component — typically an  
AV receiver — that has a CONTROL OUT jack. Remote control  
signals are passed through to the player from the remote sensor of  
the other component, allowing you greater freedom in the  
placement of your player.  
After making the physical connection the player needs to be set up  
for network communication. This is done from the Initial Setup  
menu — see Setting up for network use on page 19 for detailed  
instructions.  
For best performance, we recommend using a 100BASE-TX  
compatible PC and Ethernet hub.  
Use a miniplug cord (not supplied) to connect the CONTROL  
IN jack of this player with the CONTROL OUT jack of your other  
Pioneer component.  
Connecting via an Ethernet hub  
If you already operate one or more PCs on a local area network, you  
can integrate this player by connecting it to the Ethernet hub using  
the included LAN cable.  
CONTROL  
OUT  
In the example configuration below, this player would be able to  
access content from either of the PCs.  
AV Receiver  
CONTROL  
IN  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
AC IN  
Y
IN  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
CONTROL  
IN  
DIGITAL AUDIO OUT  
PB  
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(10/100)  
R
PR  
S
IR RECEIVER  
R
SUB WOOFER  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
Y
IN  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
DIGITAL AUDIO OUT  
P
B
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(10/100)  
R
P
R
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
Ethernet hub  
1
2
3
4
(router with hub functionality)  
• You will also need to connect a coaxial digital cable, analog  
audio cable, or video cable.  
• When connected via System Control, point the remote control  
toward the connected component (such as an AV receiver). The  
remote will not work correctly when pointed at this unit.  
LAN(10/100)  
LAN(10/100)  
• You cannot connect use System Control with components that  
do not have a System Control jack or with components  
manufactured by companies other than Pioneer.  
Using an external IR receiver with this  
player  
PC 1  
PC 2  
If you prefer to keep your AV equipment in a closed cabinet, you can  
use an external IR receiver connected to the IR IN jack. You can thus  
have just the receiver outside of the cabinet and still be able to  
control the player.  
Connecting directly to a PC  
If you only need to use one PC to act as a media server, you can  
connect this player directly to the PC using the included LAN cable.  
CONTROL  
IN  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
AC IN  
Y
IN  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
DIGITAL AUDIO OUT  
PB  
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(10/100)  
R
PR  
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
IR receiver  
CONTROL  
IN  
IR  
AUDIO OUT  
(5.1ch)  
AUDIO OUT  
(2ch)  
Y
IN  
LAN(10/100)  
CENTER SURROUND FRONT  
L
VIDEO OUT  
L
DIGITAL AUDIO OUT  
PB  
SETTING  
SETTING  
2
1
HDMI OUT  
LAN(10/100)  
R
PR  
S
IR RECEIVER  
R
SUB WOOFER  
COMPONENT  
VIDEO OUT  
COAXIAL  
OPTICAL  
Tip  
PC  
• You may need to set the IR RECEIVER switch (located under the  
IR IN jack) for this player to recognize the IR receiver correctly.  
• This player does not supply power to the external IR receiver.  
Please see the operating instructions of the IR receiver for the  
power requirements.  
14  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and displays  
03  
Chapter 3  
Controls and displays  
Front panel  
1
2
3
4
5
10  
9
8
7
6
1
STANDBY/ON  
6
Press to switch the player on (the power indicator and indicator in  
the middle of the unit light up when the power is on) or into standby.  
Press to start or resume playback.  
7
2
Disc tray  
Press to stop playback (you can resume playback by pressing ).  
3
OPEN/CLOSE  
8
Press to open or close the disc tray.  
Press to pause playback. Press again to restart.  
4
Indicators  
9
Skip/scan buttons  
FL OFF – Lights when the display and other indicators are  
switched off.  
 – Press to jump to the next chapter, track, etc. Press  
and hold for fast forward scanning.  
HD – Lights when the video output is 720p, 1080i or 1080p  
(HDMI), or 720p or 1080i (component).  
 – Press to jump back to the beginning of the current  
chapter, track, etc. then to previous chapters, tracks, etc. Press  
and hold for fast reverse scanning.  
LAN – Lights when there is an active local area network (LAN)  
connection.  
10 OUTPUT RESOLUTION  
HDMI – Lights when a device is connected via HDMI.  
Press to switch the output resolution over HDMI and component  
video outputs. See Changing the output video resolution on page 12.  
5
Display  
Shows disc status and playback information.  
15  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
03  
Controls and displays  
10 ANGLE  
Remote control  
Press to change the camera angle during BD-ROM or DVD-Video  
movie multi-angle scene playback (see page 23).  
11 DISC NAVIGATOR/TOP MENU  
Press to display the top menu of a BD-ROM or DVD-Video disc.  
When playing a DVD-R/-RW disc, press to display/exit the Disc  
Navigator.  
STANDBY/ON FL  
DIMMER  
OPEN/CLOSE  
1
2
5
6
HOME MEDIA  
GALLERY  
3
12 POPUP MENU/MENU  
BD-ROM: Press to display/hide the pop-up menu.  
DVD-Video: Press to display the disc menu (if there is one).  
4
13 /// and ENTER  
Use to navigate on-screen displays and menus. Press ENTER to  
select an option or execute a command.  
CLEAR  
AUDIO  
ENTER  
OUTPUT  
RESOLUTION  
SUBTITLE ANGLE  
DISPLAY  
9
10  
12  
7
8
14 HOME MENU  
Press to display the player’s Home Menu, from which you can  
access most of the player’s functions.  
POPUP MENU  
MENU  
DISC NAVIGATOR  
TOP MENU  
11  
13  
ENTER  
15 RETURN  
Press to return to a previous screen.  
HOME  
MENU  
RETURN  
BLUE  
14  
16  
17  
15  
16 RED/GREEN/YELOW/BLUE  
Use to navigate BD-ROM menus.  
RED  
GREEN YELLOW  
17 Playback controls  
/: Press to start reverse/forward scanning.  
: Press to start or resume playback.  
: Press to pause playback; press again to restart.  
PLAY MODE  
PHOTO ZOOM  
18  
21  
19  
20  
VIDEO  
ADJUST  
TV CONTROL  
: Press to stop playback (you can resume playback by  
pressing ).  
INPUT  
SELECT  
CHANNEL VOLUME  
 : Press to jump to the start of the previous/next  
chapter/track.  
 /  
page 22).  
: Use for slow motion and step frame (see  
BD PLAYER  
18 PLAY MODE  
Press to change the Play Mode (repeat play, for example) (see  
page 22).  
1
STANDBY/ON  
Press to switch the player on or into standby.  
2
OPEN/CLOSE  
19 PHOTO ZOOM  
Press to zoom the screen when displaying a still image (see  
page 23).  
Press to open or close the disc tray.  
3
FL DIMMER  
Press to change the brightness of the display. When the display and  
other indicators are off, the FL OFF indicator (see page 15) lights.  
20 VIDEO ADJUST  
Press to display the Video Adjust screen (see page 37).  
4
Number buttons  
Use to enter title, chapter or track numbers, etc.  
21 TV CONTROL buttons  
See also Resetting the player on page 45.  
CLEAR: Press to clear a numeric entry, etc.  
ENTER: Press to select an option or execute a command.  
HOME MEDIA GALLERY  
: Press to turn the TV on or into standby.  
VOLUME +/–: Use to adjust the volume.  
5
CHANNEL +/–: Use to select TV channel.  
Press to display the Home Media Gallery screen (see page 30).  
INPUT SELECT: Press to change the input function of the TV.  
6
OUTPUT RESOLUTION  
Press to switch the output resolution over HDMI and component  
video outputs (see page 12 and page 23).  
7
AUDIO  
Press to select the audio channel or language (see page 23).  
8
SUBTITLE  
Press to select a subtitle display (see page 23).  
9
DISPLAY  
Press to display information (see page 23).  
16  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and displays  
03  
Front panel display  
L
1
2
3
1
Lights during playback of a disc.  
2
Character display  
Shows various playback information — disc time, chapter and title  
number, etc.  
3
NTSC  
Lights when the video output signal format is NTSC.  
17  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
Getting Started  
Chapter 4  
Getting Started  
If you don’t want to use the Setup Navigator, press to select  
Switching on and setting up  
Cancel, then press ENTER to exit the Setup Navigator.  
When you switch the player on for the first time the Setup Navigator  
screen appears. We recommend using this to make a few basic  
player settings.  
5
Use the / buttons to select the output video resolution  
then press ENTER.  
Setup Navigator  
Output Video Resolution  
STANDBY/ON  
Auto  
576i/480i  
576p/480p  
720p  
1080i  
1080p  
Source Direct  
If you connected this player to your TV using the HDMI connector,  
select from Auto, 576i/480i (interlaced), 576p/480p (progressive),  
720p, 1080i, 1080p, or Source Direct, then skip to step 7 (the  
aspect ratio will automatically be set to 16:9 (Widescreen)).  
Generally, the Auto setting is recommended.  
ENTER  
Setup Navigator  
Output Video Resolution  
S-Video/Video only  
576i/480i  
576p/480p  
720p  
1
2
Switch on your TV and set the video input to this player.  
1080i  
Don't Know  
Press the STANDBY/ON button on the remote control or  
the front panel to switch on.  
• It can take up to one minute for the unit to turn on.  
If you’re using an S-Video or composite video connection, select  
S-Video/Video only.  
• When you switch on for the first time, your TV should display the  
Setup Navigator screen. (If the Setup Navigator doesn’t appear,  
you can also access it from the Initial Setup menu; see page 41).  
If you’re using a component video connection, match the output  
setting with the capabilities of your TV. Select from: 576i/480i,  
576p/480p, 720p, 1080i or Don’t Know. If you select 720p or  
1080i, skip the next step since the aspect ratio will automatically be  
set to 16:9 (Widescreen).  
• When you have this unit connected to a plasma television that is  
compatible with HDMI Control, language settings are imported  
from the plasma television’s OSD settings before Setup  
Navigator begins.  
6
Use the / buttons to select the aspect ratio of your TV  
then press ENTER.  
3
Use the / buttons to choose a language, then press  
ENTER.  
Setup Navigator  
TV Aspect Ratio  
Setup Navigator  
16:9 (Widescreen)  
4:3 (Standard)  
Language  
English  
français  
Deutsch  
Italiano  
Español  
If you have a widescreen TV, select 16:9 (Widescreen); if you have a  
standard size TV, select 4:3 (Standard).  
7
Select ‘Finish Setup’ to accept the settings and exit the  
Setup Navigator, or ‘Go Back’ to go through the settings again.  
4
Press ENTER to start setting up using the Setup Navigator.  
Setup Navigator  
Setup Navigator  
Setup is complete!  
Enjoy using your BD player!  
Before using, make some simple  
settings for the BD player.  
Finish Setup  
Go Back  
Start  
Cancel  
You can run the Setup Navigator at any time by selecting it from the  
Options menu — see page 41.  
Please use the Initial Setup if you  
want to make more detailed settings.  
18  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
04  
• Select DEL to delete the character at the current cursor position  
in the name field.  
About the screen saver  
If the player is stopped or paused for more than five minutes with no  
other operation, the screen saver starts.  
• Select CLR to clear the name field.  
Once the screen saver has started, pressing any button on the front  
panel or remote will clear it and return the player to normal  
operation.  
5
Select ‘DONE’ to register the name and exit the input  
screen.  
Select CANCEL to close the keypad without registering the name.  
The screen saver starts for CDs and music files after five minutes  
pass without any commands input, whether or not playback has  
been paused or stopped.  
6
Select ‘IP Configuration’ then ‘Next Screen’ to display the IP  
configuration screen.  
Initial Setup  
Using the on-screen displays  
Video Out  
Audio Out  
Language  
Parental Lock  
Network  
IP Configuration  
This player makes extensive use of graphical on-screen displays  
(OSDs). You should get used to the way these work as you’ll need to  
use them when setting up the player, using some of the playback  
features, and when making more advanced settings for audio and  
video.  
Auto set IP Address  
Off  
IP Address  
192 255 255  
0
0
0
.
.
.
.
.
Subnet mask  
Default gateway  
255 255 255  
.
.
.
Speakers  
Options  
192 168  
1
.
Set the IP address.  
All the screens are navigated in basically the same way, using the  
cursor buttons (///) to change the highlighted item and  
pressing ENTER to select it.  
7
Set ‘Auto set IP Address’ to ‘On’.  
If there is a DHCP server on the local area network (LAN), this player  
will automatically be allocated an IP address. If you’re using a  
broadband router or broadband modem that has a DHCP (Dynamic  
Host Configuration Protocol) server function, select On. The IP  
address will automatically be determined.  
Button  
What it does  
Display/exit the on-screen display  
HOME MENU  
     
ENTER  
Changes the highlighted menu item  
Selects the highlighted menu item  
If there is no DHCP server on the network and you select On, this  
player will use its own Auto IP function to determine the IP address.  
• If you want to set the IP address manually, select Off then set  
the IP Address, Subnet mask and Default gateway: Use the /  
// buttons to select a field; use the number buttons to  
enter a value. Press ENTER to finish and exit the screen.  
Returns to the previous menu or screen without  
saving changes  
RETURN  
8
Press HOME MENU to exit the Initial Setup menu.  
Tip  
You should now be able to use the Home Media Gallery (accessible  
from the Home Menu). See Using the Home Media Gallery on  
page 30 for more.  
• Information at the bottom of an OSD screen explains the  
currently selected menu item and shows which buttons can be  
used for that screen.  
• For information on DHCP refer to the network device’s operating  
instructions.  
• You may need to contact your service provider or network  
administrator when manually entering an IP address.  
Setting up for network use  
If you’ve connected this player to a local area network (LAN) you may  
need to make a few settings before you can use the Home Media  
Gallery feature over the network.  
1
2
3
4
Press HOME MENU and select ‘Initial Setup’.  
Select ‘Network’.  
Select ‘Device Name’ then ‘Next Screen’.  
Use the on-screen keypad to enter a name for the player.  
This is how the player will appear to connected devices on the local  
area network.  
Device  
name input  
BDP-LX70/WV5  
SHFT  
SPC  
DEL  
CLR  
• Use the /// buttons and ENTER to select characters  
from the keypad.  
• Select SHFT to toggle between upper and lower case.  
• Select SPC to insert a space.  
19  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
Getting Started  
When playing BD-ROM discs:  
Playing movies, music and photos  
• Commercially produced BD-ROM movie discs often go straight  
to the disc menu when playback is started (sometimes preceded  
by an opening sequence). Navigate through the disc menu  
using the cursor keys (///) and the ENTER button. You  
can also use the number buttons to select numbered items in  
some menus.  
Using this player, you can enjoy watching movies, listening to music  
and browsing photos, from BD and DVD discs or from a media  
server on the network. How you navigate, browse and play content  
varies according to the format of the content and the media:  
• To play a BD or DVD movie disc (i.e., one containing BD-ROM or  
DVD-Video application format), see Playing BD/DVD movies and  
audio CD below.  
• To get back to the top menu, press TOP MENU.  
• Some BD-ROM discs feature pop-up menus that do not  
interrupt playback; press POPUP MENU/MENU to access  
these.  
• To play a DVD-R/-RW disc recorded with movie, music or photo  
files, turn to Using the Disc Navigator on page 25.  
• To play content from a media server, please refer to Using the  
Home Media Gallery on page 30.  
When playing DVD-Video discs:  
• Commercially produced DVD movies often go straight to the  
disc menu when playback is started (sometimes preceded by an  
opening sequence). Navigate the disc menu using the cursor  
(///) and ENTER buttons. You can also use the number  
buttons to select numbered items in some menus.  
Playing BD/DVD movies and audio CD  
The basic playback controls for playing BD/DVD movies and audio  
CD discs are covered here. Further functions are detailed in the next  
chapter.  
• To get back to the top menu, press TOP MENU.  
• To get back to the disc menu, press POPUP MENU/MENU.  
When playing audio CDs:  
• For more information see Playback controls on page 21.  
STANDBY/ON  
OPEN/CLOSE  
5
When you’ve finished using the player, eject the disc and  
switch the player back into standby.  
• To open/close the disc tray, press OPEN/CLOSE. Remove the  
disc before putting the player into standby.  
• Press STANDBY/ON to switch the player into standby.  
About NTSC/PAL TV systems  
The TV system setting is set to PAL when you turn the player on.  
When video output in NTSC is played back, the TV system setting is  
automatically changed. When video is stopped, playback is  
resumed with video output in the last format used.  
POPUP MENU  
MENU  
TOP MENU  
ENTER  
1
If the player isn’t already on, press STANDBY/ON to  
switch it on.  
Also turn on your TV and make sure that it is set to the correct video  
input.  
2
Press OPEN/CLOSE to open the disc tray.  
3
Load a disc.  
Load a disc with the label side facing up, using the disc tray guide  
to align the disc (if you’re loading a double-sided DVD-Video disc,  
load it with the side you want to play face down).  
The player will take a short while to read the disc, after which the  
disc type will show up in the front panel display.  
4
Press to start playback.  
• Use the PAUSE and buttons to pause or stop playback. You  
can resume playback in either case by pressing . See also  
Resuming playback on page 21.  
• See Playback controls on page 21 for other controls available  
during playback.  
20  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
04  
• Some actions in the Disc Navigator/Home Media Gallery (such  
as changing the Browse category) will cause the resume  
position to be lost.  
Playback controls  
Scanning video and audio  
CLEAR  
ENTER  
SUBTITLE ANGLE  
OUTPUT  
RESOLUTION  
You can fast-scan BD/DVD movies, audio CDs, or movie and song  
AUDIO  
DISPLAY  
1
files forward or backward at various speeds.  
1
During playback, press or to start scanning.  
There is no sound while scanning video and audio.  
2
Press repeatedly to increase the scanning speed.  
The scanning speed is shown on-screen.  
3
To resume normal playback, press .  
Depending on the disc, normal playback may automatically resume  
when a new chapter is reached on a BD/DVD movie disc.  
Selecting titles, chapters and tracks directly  
PLAY MODE  
PHOTO ZOOM  
Resuming playback  
CLEAR  
ENTER  
The resume function offers a convenient way to restart playback  
from where you stopped it previously.  
You can select titles, chapters and tracks directly with BD, DVD  
movies and audio CDs .  
2
Use the number buttons to select a title, chapter or track.  
• If the disc is stopped, playback starts from the selected title or  
track.  
Resuming playback of BD/DVD movies and audio CDs  
If you stop playback before the end of the disc, the playback stop  
position is stored so that you can resume watching the disc from the  
same place later.  
• If the disc is playing, playback jumps to the start of the selected  
chapter or track.  
• To resume playback, press . Playback will start from the stored  
resume position. For audio CDs, playback resumes from the  
beginning of the track.  
Skipping content  
• Press again to cancel the resume function.  
You can skip over content during playback of BD and DVD movies,  
Audio CDs, movie and song files, and photo slideshows.  
Note  
2
In the following case, the resume position is cleared:  
• Eject the disc.  
During playback, press or to skip content.  
• When playing a BD or DVD movie, playback jumps to the start of  
the previous/next title, chapter or track. (If the disc is stopped,  
playback will start.)  
• Use Home Media Gallery/Disc Navigator.  
• Switch the player off (DVD resume position remains saved).  
• During movie or song file playback, the previous or next file will  
start playing.  
• Certain BD-ROM discs cannot be restarted from the position in  
which they are paused.  
• During photo slideshow playback, you can skip to the previous  
or next photo.  
Resuming playback of movie, music and photo files  
Movie and music files are resumed from the start of the title/track  
(rather than the stop position within the title/track): photo slideshow  
playback is resumed from the photo file within the slideshow.  
• If you interrupt playback of a movie or slideshow by pressing  
RETURN to display the Disc Navigator or Home Media Gallery  
screen, you can still resume playback of the same title/  
slideshow photo using the button, regardless of what is  
highlighted on the screen. (Use the ENTER button to start  
playback of the currently highlighted item in the Disc Navigator/  
Home Media Gallery.)  
Note  
1 This function may not be supported depending on the content or server software.  
2 With some titles on BD-ROM or DVD-Video discs it is not possible to jump to the start of the selected title or chapter.  
21  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
Getting Started  
Play Mode option compatibility  
Playing video in slow motion  
The available options depend on what kind of disc/file is playing  
3
(=available / =unavailable):  
You can play BD and DVD movies and movie files at different  
1
Disc / file type  
Play Mode  
forward slow motion speeds.  
DVD-  
PC File  
PC File  
PC File  
Audio  
CD  
Option  
1
During playback, press to start slow motion playback.  
BD-ROM  
VIDEO (Music) (Movie) (Photo)  
• The slow motion speed is shown on-screen.  
Time Search  
Title Search  
Repeat Chapter  
Repeat Title  
Repeat Track  
Repeat All  
• There is no sound during slow motion playback.  
Press repeatedly to change the slow motion speed.  
To resume normal playback, press .  
Depending on the disc, normal playback may automatically resume  
when a new chapter is reached.  
2
3
Video step forward and step reverse  
Random  
Repeat Off  
You can use step forward and step reverse when playing a BD or  
DVD movie or movie files.  
1, 2  
Using time search  
1
2
3
During playback, press PAUSE.  
Press or to move the video forward or back one step.  
To resume normal playback, press .  
CLEAR  
ENTER  
When playing a BD or DVD movie, normal playback may  
automatically resume when a new chapter is reached.  
You can navigate directly to a certain point in a BD or DVD movie, or  
1,3  
in a movie file.  
Changing the Play Mode  
PLAY MODE  
1
During playback, press PLAY MODE and select ‘Time  
Search’.  
Use the PLAY MODE button on the remote control to select one of  
the various playback modes for BD and DVD movie discs, audio CD  
discs, movie and music files and photo slideshows.  
2
Use the number buttons to enter a time in hours, minutes  
and seconds for playback to resume from.  
For a BD or DVD movie, the time you enter should be the time into  
the currently playing title. For a movie file it will be the playback time  
into the file.  
You can’t select a Play Mode while a BD or DVD disc menu is being  
displayed, or while playing some BD/DVD movie titles, audio CD, or  
movie and music files and photo slideshows.  
• For example, press 4, 5, 0, 0 to have playback start from 45  
minutes into the title/file. For 1 hour, 20 minutes, press 1, 2, 0,  
0, 0.  
During playback, press PLAY MODE to change the Play  
Mode.  
• Press CLEAR to clear the input.  
See Play Mode option compatibility below for the options available  
with the disc/file you’re playing.  
3
Press ENTER to start playback from the time you entered.  
Time Search (see Using time search below)  
Using title search  
Title Search (see Using title search below)  
Repeat Chapter (repeats the current chapter)  
T
1
Repeat Title (repeats the current title)  
CLEAR  
ENTER  
Repeat Track (repeats the current track)  
You can directly jump to the start of any title on a BD-ROM or  
DVD-Video.  
1,3  
Repeat All (repeats the current browse list)  
Random (play tracks from an audio CD, music files, or  
1
During playback, press PLAY MODE and select ‘Title  
photo files in a random order)  
Search’.  
Repeat Off (cancels the repeat and random modes)  
2
Use the number buttons to select a title.  
The current Play Mode is displayed on-screen. Press CLEAR to  
resume normal playback.  
Press CLEAR to clear the input.  
3
Press ENTER to start playback of the title you selected.  
Note  
1 This function may not be supported depending on the content or server software.  
2 You cannot use step reverse with movie files.  
3 With some BD-ROM and DVD-video titles, it is not possible to select any Play Mode options.  
22  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
04  
• There may be a short delay after pressing the button for the  
audio channel to change.  
Switching camera angles  
ANGLE  
Some BD and DVD movies feature scenes shot from two or more  
angles — check the disc box for details.  
Tip  
• Even when multiple audio streams are included in a movie file,  
you cannot select from among them while playing back of a  
movie file.  
During playback, press ANGLE to switch the angle.  
• There may be a short delay after pressing the button before the  
angle changes.  
• To set audio language preferences, see Audio Language on  
page 40.  
• Playback resumes if the angle is changed while paused.  
Zooming the screen  
PHOTO ZOOM  
Displaying disc or file information  
DISPLAY  
Various track, chapter and title information, as well as the video  
transmission rate for DVD and BD movies, can be displayed on-  
screen. The information available depends on the type disc or file,  
and whether it’s playing or stopped.  
During playback of a photo slideshow you can zoom the screen to  
2x view or 4x view.  
1
During playback, press PHOTO ZOOM to change the zoom.  
Press repeatedly to cycle through: normal 2x zoom 4x zoom.  
Press DISPLAY to show/switch the information displayed.  
3
2
Use the cursor keys (///) to move the zoomed area  
Press DISPLAY repeatedly to change the displayed information.  
of the screen.  
The zoom mode is cancelled when you stop playback.  
Repeat Chapter  
Play  
DVD-VIDEO  
1–2  
Chapter  
Title Total  
0 . 03 . 10  
12  
1h 28m 03s  
Switching subtitles  
SUBTITLE  
DVD-Video Play display 1  
Repeat Chapter  
Play  
1–2  
0 . 03 . 12  
Some BD and DVD movie discs have subtitles in one or more  
languages; the disc box will usually tell you which subtitle  
languages are available.  
DVD-VIDEO  
Chapter Time 0 . 02 . 43  
Chapter Total 0 . 03 . 16  
10 . 08 Mbps  
DVD-Video Play display 2  
1
1
Press SUBTITLE repeatedly to select a subtitle option.  
The current subtitle language/option is displayed on-screen and in  
the front panel display.  
Switching the output video resolution  
Subtitle  
1/2  
English  
OUTPUT  
RESOLUTION  
2
To switch the subtitle display off, press SUBTITLE then  
CLEAR.  
You can switch the output video resolution for HDMI and  
component output.  
There may be a short delay after pressing the button before the  
subtitles change.  
Press OUTPUT RESOLUTION repeatedly to select an output  
video resolution.  
The current source and output video resolution are shown on-  
screen.  
Tip  
• To set subtitle language preferences, see Subtitle Language on  
page 40.  
Output Video Resolution: Source Direct  
(1080 / 24p)  
Source: 1080 / 24p  
Switching audio streams/channels  
AUDIO  
Note  
Some BD and DVD movie discs contain multiple audio streams that  
you can select on playback. These might be different audio  
languages and/or different audio formats (such as a DTS 5.1-  
channel sound track and a Dolby Digital 2-channel sound track).  
• Depending on your display, some of the settings may result in  
the picture disappearing. In this case, press OUTPUT  
RESOLUTION repeatedly until the picture re-appears.  
• See Changing the output video resolution on page 12 for more  
information.  
Press AUDIO repeatedly to select an audio channel/stream  
2
option.  
The current option is shown on-screen.  
Audio:  
1/2 Dolby Digital 2/0ch  
English  
Switching audio languages on a BD/DVD movie  
Note  
1 Some discs only allow you to change the subtitle language from the disc menu. Press POPUP MENU/MENU to access.  
2 Some discs only allow you to change the audio language from the disc menu. Press POPUP MENU/MENU to access.  
3 There may be instances with some discs where no information can be displayed.  
23  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
04  
Getting Started  
Frequently Asked Questions  
• Why won’t the disc I loaded play?  
• Why is the mono audio on some discs rather quiet compared to  
other discs?  
First check that you loaded the disc the right way up (label side  
up), and that it’s clean and not damaged. See Taking care of your  
player and discs on page 44 for information on cleaning discs.  
When mono audio is split into the L and R channels, there may  
be a small loss of volume.  
If a disc loaded correctly won’t play, it’s probably an  
incompatible format or disc type. See Disc/content format  
playback compatibility on page 6 for more on disc compatibility.  
• There’s no sound when connected using HDMI!  
You won’t hear any sound from the HDMI output if your  
component is only DVI/HDCP-compatible.  
• There’s no picture!  
Your TV is probably not compatible with the selected video  
output resolution. Check your TV for compatibility with  
progressive scan video and higher resolutions. Press the  
OUTPUT RESOLUTION button to switch the video output. See  
also Changing the output video resolution on page 12.  
• I can’t connect to my local area network!  
First of all check the settings of the media server you’re using.  
Make sure that if you made the network settings automatically  
on this player then you also select auto setup on the server.  
(Likewise, if you made the settings manually on the server, you  
should set up this player manually.)  
• I can’t see any picture, or get high definition video output when  
playing some BDs!  
Check also that you are using the right kind of LAN cable for the  
type of connection you made: a standard straight LAN cable if  
this player is connected to a hub; a crossed LAN cable for direct  
connection to a PC. See also Network connection on page 14.  
When playing some discs, there may be no composite video,  
S-Video and/or component video output, or high-definition  
content may be converted to standard-definition 576i/480i or  
576p/480p component output. This is for content protection. To  
view the disc, connect the player to an HDMI-compatible  
display. See Connecting for HDMI output on page 11.  
• I have a widescreen TV so why are there black bars at the top and  
bottom of the screen when I play some discs?  
Some movie formats are such that even when played on a  
widescreen TV, black bars appear at the top and bottom of the  
screen. This is not a malfunction.  
• I’ve connected to a HDMI/DVI compatible component but I can’t  
get any signal and the front panel HDMI indicator won’t light!  
Make sure that you’ve selected this player as the HDMI input in  
the settings for the component you’re using. You may need to  
refer to the instruction manual of the component to do this.  
An HDMI connection can only be made with other HDMI  
components, or a High-bandwidth Digital Content Protection  
(HDCP)-compatible DVI component. See Connecting for HDMI  
output on page 11 for more on HDMI compatibility.  
• There’s no picture from the HDMI output!  
Make sure the output resolution of this player matches that of  
the component you have connected using HDMI. See Changing  
the output video resolution on page 12.  
• Why is the playback sample rate of the DVD only 48 kHz instead of  
96 kHz?  
Playback sample rate of the audio is downsampled to 48 kHz.  
• My AV receiver is definitely compatible with 96 kHz Linear PCM  
audio, but it doesn’t seem to work with this player. What’s wrong?  
192 kHz/96 kHz BD and 96 kHz DVD discs only output digital  
audio downsampled to 48 kHz through the optical and coaxial  
outputs.  
96 kHz 7.1ch BD discs only output digital audio downsampled to  
48 kHz through HDMI output when video output is 576i/480i or  
576p/480p over HDMI. These are not malfunctions.  
24  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Disc Navigator  
05  
Chapter 5  
Using the Disc Navigator  
Use the Disc Navigator to browse through the PC files on a DVD-R/-RW disc to find what you want to play. Additionally, PC files contained  
on a BD-ROM can be played back from Disc Navigator. You can use the Disc Navigator when a disc is playing or stopped.  
Important  
• It’s not possible to use the Disc Navigator with DVD-Video discs, or with Audio CDs.  
• You cannot use Disc Navigator with BD-ROM discs that do not contain PC files.  
Introduction  
Movie Navigator  
Most of the features described in this chapter make use of on-  
screen displays. Navigate these using the /// and ENTER.  
To go back to the previous menu or screen, use the RETURN button.  
The button guide at the bottom of every screen shows which buttons  
do what.  
The movie section of the Disc Navigator allows you to browse and  
play all the compatible movie files stored on the loaded BD-ROM or  
DVD-R/-RW disc (non-movie files are not displayed).  
See also File compatibility on page 7 for more on compatible file  
types.  
1
If you haven’t already done so, select ‘Disc Navigator’ from  
the Home Menu, then ‘Movies’.  
You should see a list of all the movie files found on the disc, together  
with their playing times.  
POPUP MENU  
MENU  
DISC NAVIGATOR  
TOP MENU  
20 items  
All Movies  
ENTER  
Scallop-man 3  
1:31  
1:02  
1:31  
1:25  
1:33  
1:26  
1:57  
1:36  
1:18  
1:18  
HOME  
MENU  
Closer  
RETURN  
Discount store  
School of legend  
Advance in the future part-2  
The EEL  
Date: 2006  
Genre: Action  
Format: WMV  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
1
Press HOME MENU and select ‘Disc Navigator’ from the on-  
• When the movie length cannot be determined, it is displayed as  
“-:--”.  
screen display.  
Alternatively, press DISC NAVIGATOR.  
2
Use the / buttons to change the current selection  
(highlighted in yellow).  
On the left side of the screen you can see file information, such as  
the genre, date and file format, for the current selection.  
Home Menu  
Disc Navigator  
Home Media Gallery  
Video/Audio Adjust  
Initial Setup  
3
Press ENTER to play the currently highlighted movie.  
Press to start or resume playback from the last title played.  
Displaying the Movie Options menu  
Press to display the Movie Options menu:  
2
Select ‘Movies’, ‘Photos’ or ‘Music’.  
See the sections below for more information on each of these.  
20 items  
All Movies  
Scallop-man 3  
Movie Options  
Closer  
Play from Beginning  
Add to Quicklist  
Discount store  
Disc Navigator  
School of legend  
Advance in the future part-2  
The EEL  
Date: 2006  
Genre: Action  
Format: WMV  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
Movies  
Photos  
Music  
Play from Beginning: Play the selected movie from the  
beginning.  
Add to Quicklist: Add the selected movie to your Quicklist. The  
Quicklist feature is a useful way to organize movie files for handy  
selection and playback. The Quicklist can contain up to 25 movies.  
3
Press HOME MENU to exit the Disc Navigator screen.  
1
Note  
1 Quicklists are lost when you exit Movie Navigator.  
25  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
05  
Using the Disc Navigator  
Searching movies  
Displaying the Browse menu  
From the Search sub-menu you can enter a few (up to 20) characters  
of a movie title or genre. As each character is entered into the  
search field the search results are dynamically updated, narrowing  
down the list of movies until you can see the one you’re looking for.  
Press to display the Browse menu:  
20 items  
All Movies  
Scallop-man 3  
1:31  
1:02  
1:31  
1:25  
1:33  
1:26  
1:57  
1:36  
1:18  
1:18  
Closer  
Loading ...  
Discount store  
4
items  
Search Results  
School of legend  
Advance in the future part-2  
Scallop-man 3  
Say No  
1:31  
1:02  
1:31  
1:33  
All Movies  
The EEL  
Browse  
Search  
Sort  
School of legend  
Seesaw  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
S _  
Depending on the browse menu, certain options may not be  
selectable.  
Enter  
Home Menu  
Exit  
Select  
All Movies: Display all movie files found on the disc.  
• Use the /// and ENTER buttons to select characters  
from the keypad.  
Browse: Browse movies by Genre, Quicklist, or Folders. See also  
Browsing movies below.  
• Select SHFT to toggle between upper and lower case.  
Search: Find a movie by entering a name (or a few letters) to  
search for. The search results are narrowed down as you enter  
more letters. See also Searching movies below.  
• Select SPC to insert a space.  
• Select DEL to delete the character at the current cursor position  
in the search field.  
Sort: Sort movies by date (oldest first or most recent first) or  
alphabetically by title or genre (‘A’ first or ‘Z’ first).  
• Select CLR to clear the search field.  
• Select DONE to close the keypad and select movies or genres  
from the search results; select CANCEL to close the keypad and  
clear the search results.  
Browsing movies  
The Browse sub-menu gives you three ways to browse movies.  
20 items  
All Movies  
Scallop-man 3  
1:31  
1:02  
1:31  
1:25  
1:33  
1:26  
1:57  
1:36  
1:18  
1:18  
Closer  
Discount store  
School of legend  
Advance in the future part-2  
The EEL  
Go back  
Genres  
Quicklist  
Folders  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
Go back: Return to the previous menu.  
Genres: Display all movie genres and how many movies are in  
each one. Select a genre and press ENTER to see the list of  
movies in that genre.  
Quicklist: Display a list of all the movies currently in your  
Quicklist. Press to display the Movie Options menu, where  
you can start playback or remove movies from the Quicklist:  
20 items  
Quicklist  
Scallop-man 3  
Movie Options  
Closer  
Play from Begining  
Remove  
Discount store  
School of legend  
Advance in the future part-2  
The EEL  
Date: 2006  
Genre: Action  
Format: WMV  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
Folders: Display a list of folders and movie files. Select a folder  
and press ENTER to see the list of subfolders/movies files in that  
folder. When you play a file in this mode, continuous play of files  
in that folder does not occur.  
26  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Disc Navigator  
05  
Add to Quicklist: Add the selected photo to your Quicklist. The  
Quicklist feature is a useful way to organize photos for handy  
selection and slideshow playback. The Quicklist can contain up  
Photo Navigator  
The photo section of the Disc Navigator allows you to browse and  
display all the compatible photo files found on the loaded BD-ROM  
or DVD-R/-RW disc (non-photo files are not displayed).  
1
to 25 photos.  
See also File compatibility on page 7 for more on compatible file  
types.  
Displaying the Browse menu  
Press to display the browse menu.  
• From the left-most column, press to display the browse menu  
when displaying photos in thumbnail view:  
1
If you haven’t already done so, select ‘Disc Navigator’ from  
the Home Menu, then ‘Photos’.  
You should see a list of folders/photo files from the disc.  
2
Use the / buttons to change the current selection  
Folder1  
30 items  
(highlighted in yellow).  
Go back  
file_001  
file_002  
file_003  
file_004  
file_005  
file_006  
file_007  
file_008  
file_009  
Folders  
6 items  
All Photos  
Browse  
Search  
Sort  
Folder1  
Folder2  
File1  
File2  
File3  
File4  
Depending on the browse menu, certain options may not be  
selectable.  
All Photos: Display all photos found on the disc as thumbnail  
files.  
3
Select a folder and press ENTER to see the list of photos and  
subfolders within the folder.  
Browse: Browse photos by Date, Quicklist or Folders. See also  
Browsing photos below.  
Folder1  
30 items  
Search: Find a photo by entering a name (or a few letters) to  
search for. The search results are narrowed down as you enter  
more letters. See also Searching photos on page 28.  
Go back  
file_001  
file_002  
file_003  
file_004  
file_005  
file_006  
file_007  
file_008  
file_009  
Sort: Sort photos by date (oldest first or most recent first), or  
alphabetically by name (‘A’ first or ‘Z’ first).  
Browsing photos  
The Browse sub-menu gives you several ways to browse photos.  
4
Use the / buttons to change the current selection  
(highlighted in yellow).  
• Press ENTER to start full-screen slideshow playback from the  
currently selected photo.  
Folder1  
30 items  
Go back  
file_001  
file_002  
file_003  
file_004  
file_005  
file_006  
file_007  
file_008  
file_009  
• Press to start or resume slideshow playback from the last  
photo displayed.  
Go back  
Date  
Quicklist  
Folders  
Displaying the Photo Options menu  
Press to display the Photo Options menu.  
• Press ENTER to display the Photo Options menu when  
displaying photos in thumbnail view.  
• Go back: Return to the previous menu.  
• Date: Browse photos as thumbnails by date (year and month).  
Select a year then press ENTER to further browse by month.  
Select a month and press ENTER to see the photos taken that  
month.  
Folder1  
30 items  
Photo Options  
Go back  
file_001  
file_002  
file_003  
file_004  
file_005  
file_006  
file_007  
file_008  
file_009  
Slideshow  
Add to Quicklist  
Date: 1/23/2006  
Resolution: 196  
Format: JPEG  
x
298  
Slideshow: Start full-screen slideshow playback from the  
currently selected photo. During the slideshow, press to  
advance to the next photo; to go back to the previous photo;  
PAUSE to pause the slideshow; STOP to stop and exit the  
slideshow; ZOOM to enlarge the picture on the screen.  
Note  
1 Quicklists are lost when you exit Photo Navigator.  
27  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
05  
Using the Disc Navigator  
Quicklist: Display thumbnails of all the photos currently in your  
Quicklist. Press ENTER to display the Photo Options menu, from  
where you can start slideshow playback or remove photos from  
the Quicklist:  
2
Use the / buttons to change the current selection  
(highlighted in yellow).  
3
Press ENTER to display the Album list.  
Pioneer All Stars  
20 items  
Quicklist  
25 items  
Photo Options  
Acoustic Guitar  
Best of Pioneer All Stars  
Cooking Or Eating  
Family  
20 Songs  
13 Songs  
10 Songs  
12 Songs  
18 Songs  
11 Songs  
18 Songs  
10 Songs  
13 Songs  
21 Songs  
Slideshow  
Remove  
Good!!  
File: sample.jpg  
Date: 1/23/2006  
Resolution: 196  
Format: JPEG  
Morning Glory  
Poker Face  
x
298  
Song for You  
Tokyo  
Two-Tone  
4
Select the Album you want to listen to and press ENTER to  
Folders: Display a list of folders and photo files on the disc.  
Select a folder and press ENTER to see the subfolders/photos.  
When you play a file in this mode, continuous play of files in that  
folder does not occur.  
display the Song list.  
Acoustic Guitar  
20 items  
Electrified  
9:31  
8:00  
7:31  
3:55  
6:33  
5:26  
4:57  
9:36  
6:18  
6:18  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Go  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
Searching photos  
From the Search sub-menu you can enter a few (up to 20) characters  
of a photo title. As each character is entered into the search field the  
search results are dynamically updated, narrowing down the list of  
photos until you can see the one you’re looking for.  
Artist: Pioneer All Stars  
Album: Acoustic Guitar  
Genre: Rock  
Format: WMA  
Rush Street  
Take The Time  
• When the movie length cannot be determined, it is displayed as  
“-:--”.  
Search Results  
5 items  
5
Use the / buttons to change the current selection  
(highlighted in yellow).  
R _  
On the left side of the screen you can see file information, such as  
the artist and album name, genre and file format, for the current  
selection.  
Home Menu  
Exit  
6
Press ENTER to play the currently highlighted music.  
The display shows the Now Playing screen.  
See Searching movies on page 26 for how to use the screen keypad.  
• Press to start or resume playback from the last track played  
on the Now Playing screen.  
Music Navigator  
The music section of the Disc Navigator allows you to browse and  
play all the compatible music files found on the loaded BD-ROM or  
DVD-R/-RW disc (non-music files are not displayed).  
Displaying the Song Options menu  
Press to display Song Options menu:  
See also File compatibility on page 7 for more on compatible file  
types.  
Acoustic Guitar  
20 items  
Song Options  
1
If you haven’t already done so, select ‘Disc Navigator’ from  
Electrified  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Go  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
Play song  
the Home Menu, then ‘Music’.  
You should see a list of the artist names on the disc.  
Add to Quicklist  
Arti  
Albumlbu  
Gen  
FormFo  
A
s
r
t
t
:
is  
P
t
i
:
o
D
n
e
e
p
e
e
r
ch  
ti  
xe  
lternative  
MA  
A
e
ll  
M
S
o
t
d
a
e
rs  
A
:
m
:
o
R
u
e
s
m
i
c
G
s
u
8
i
1
ta-0  
r
4
G
r
e
e
n
:
r
R
e
o
:
A
ck  
a
r
t
m
:
a
W
t:  
M
W
A
Artists  
20 items  
Rush Street  
Take The Time  
Black Pappers  
1
2
4
1
1
1
4
2
5
2
Album  
Albums  
Albums  
Album  
Album  
Album  
Albums  
Albums  
Albums  
Albums  
David Jack  
Eric Gilberto  
King  
Play Song: Play the selected song from the beginning.  
Michael Beck  
Pioneer All Stars  
Rock'n Roll Brothers  
The Fishes  
Add to Quicklist: Add the selected song to your Quicklist. The  
Quicklist feature is a useful way to organize music files for handy  
selection and playback. The Quicklist can contain up to 25  
Treetop  
William And Marry  
1
songs.  
Note  
1 Quicklists are lost when you exit Music Navigator.  
28  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Disc Navigator  
05  
Folders: Display a list of folders and song files. Select a folder  
and press ENTER to see the list of subfolders/songs. When you  
play a file in this mode, continuous play of files in that folder  
does not occur.  
Displaying the Browse menu  
Press to display the Browse menu:  
Acoustic Guitar  
20 items  
Searching songs  
Electrified  
9:31  
8:00  
7:31  
3:55  
6:33  
5:26  
4:57  
9:36  
6:18  
6:18  
End Of The Road  
Into The Arena  
Keep On Running  
From the Search sub-menu you can enter a few characters (up to 20)  
of a song title, genre, artist, or album. As each character is entered  
into the search field the search results are dynamically updated,  
narrowing down the list until you can see the one you’re looking for.  
Never Let You Go  
All Songs  
Open Your Eyes  
Browse  
Search  
Sort  
Now Playing  
Pictures Of My Life  
Real Sound  
Rush Street  
Take The Time  
Loading ...  
4
items  
Search Results  
Scallop-man 3  
Say No  
1:31  
1:02  
1:31  
1:33  
Depending on the browse menu, certain options may not be  
selectable.  
School of legend  
Seesaw  
All Songs: Display all songs (files/tracks) found on the disc.  
S _  
Browse: Browse songs by Artist, Album, Genre, Quicklist or  
Folders. See also Browsing songs below.  
Search: Find a song by entering a name (or a few letters) to  
search for. The search results are narrowed down as you enter  
more letters. See also Searching songs below.  
Enter  
Home Menu  
Exit  
Select  
See Searching movies on page 26 for how to use the screen keypad.  
Sort: Sort songs by date (oldest first or most recent first), or  
alphabetically by song title, artist, album or genre (‘A’ first or ‘Z’  
first).  
Now Playing: Display song information (track name, artist,  
album, genre, etc.) and playback information. See also Now  
playing song information below.  
Now playing song information  
The Now Playing screen shows detailed information about the song  
playing, including:  
• Artist and song title  
• Progress bar (elapsed time and song length)  
• Album name  
Browsing songs  
The Browse sub-menu gives you various ways to browse songs.  
• Genre  
Acoustic Guitar  
20 items  
Electrified  
9:31  
8:00  
7:31  
3:55  
6:33  
5:26  
4:57  
9:36  
6:18  
6:18  
• File format  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Go  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
• Browse menu  
• Play status  
Go back  
Artists  
Albums  
Genres  
Quicklist  
Folders  
• Play mode  
Rush Street  
• Next/Previous song names  
Take The Time  
Go back: Return to the previous menu.  
Now Playing  
Artists: Display a list of artists, and how many albums are  
associated with each. Select an artist and press ENTER to see  
the album list by that artist.  
Pioneer All Stars  
Real Sound  
Acoustic Guitar  
Genre: Rock  
Format: MP3  
3:10 / 5:51  
All Songs  
Browse  
Search  
Sort  
Now Playing  
Albums: Display a list of albums, and how many songs are  
associated with each. Select an album and press ENTER to see  
the list of songs on that album.  
Previous Song  
Pictures Of My  
Next Song  
Rush Street  
Genres: Display all music genres, and how many songs are in  
each one. Select a genre and press ENTER to see the list of  
artists in that genre.  
Quicklist: Display a list of all the songs currently in your  
Quicklist. Press to display the Song Options menu, where  
you can start playback or remove songs from the Quicklist:  
Quicklist  
20 items  
Song Options  
Electrified  
End Of The Road  
Play Song  
Remove  
Into The Arena  
Keep On Running  
Never Let You Go  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
Artist: Pioneer All Stars  
Album: Acoustic Guitar  
Genre: Rock  
Format: WMA  
Rush Street  
Take The Time  
29  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
06  
Using the Home Media Gallery  
Chapter 6  
Using the Home Media Gallery  
DLNA  
Introduction  
The Home Media Gallery allows you to browse and play movies,  
music and photos stored on media servers connected on an  
identical Local Area Network (LAN) as the player. This unit allows for  
the playing of files stored on the following:  
• PCs running Microsoft Windows XP with Windows Media  
Connect installed  
TM  
DLNA CERTIFIED Audio/Video/Image Player  
• PCs running Microsoft Windows Vista or XP with Windows  
Media Player 11 installed  
The Digital Living Network Alliance (DLNA) is a cross-industry  
organization of consumer electronics, computing industry and  
mobile device companies. Digital Living provides consumers with  
easy sharing of digital media through a wired or wireless network in  
the home.  
• DLNA-compatible digital media servers (on PCs or other  
components)  
About network playback  
The DLNA certification logo makes it easy to find products that  
comply with the DLNA Interoperability Guidelines. This unit  
complies with DLNA Interoperability Guidelines v1.0.  
The network playback function of this unit uses the following  
technologies:  
When a PC running DLNA server software or other DLNA-  
compatible device is connected to this player, some setting changes  
of software or other devices may be required. Please refer to the  
operating instructions for the software or device for more  
information.  
Windows Media Connect  
See About Windows Media Connect on page 36 for details.  
PlaysForSure  
TM  
DLNA and DLNA CERTIFIED are trademarks and/or service marks of Digital Living  
Network Alliance.  
Content playable over a network  
Even when encoded in a compatible format, some files may not play  
correctly. See File compatibility on page 7. Some functions may not  
be supported depending on the server type or version used.  
PlaysForSure is a marketing certification given by Microsoft. The  
PlaysForSure logo makes it easy to find digital media stores and  
devices that work together. Digital media purchased from online  
stores carrying the PlaysForSure logo is available for use on this  
unit.  
Supported file formats vary by server. As such, files not supported by  
your server are not displayed on this unit.  
For more information check with the manufacturer of your server.  
This unit complies with PlaysForSure Requirements Specification  
for Network Devices Version 2.01.  
About playback behavior over a network  
• Playback may stall when the PC is switched off or any media  
files stored on it are deleted while playing content.  
The PlaysForSure logo, Windows Media and the Windows logo are trademarks or  
registered trademarks of Microsoft Corporation in the USA and other countries.  
• If there are problems within the network environment (heavy  
network traffic, etc.) content may not be displayed or played  
properly (playback may be interrupted or stalled). For best  
performance, a 100BASE-TX connection between player and PC  
is recommended.  
Windows Media DRM  
Microsoft Windows Media Digital Rights Management (WMDRM) is  
a platform to protect and securely deliver content for playback on  
computers, portable devices and network devices. Home Media  
Gallery functions as a WMDRM 10 for networked devices. WMDRM-  
protected content can only be played on media servers supporting  
WMDRM.  
• Playback performance will vary with the power and condition  
(seek time of the hard disk, etc.) of the PC being used.  
• If several clients are playing simultaneously, as the case may be,  
playback is interrupted or stalled.  
Content owners use WMDRM technology to protect their intellectual property,  
including copyrights. This device uses WMDRM software to access WMDRM-  
protected content. If the WMDRM software fails to protect the content, content  
owners may ask Microsoft to revoke the software’s ability to use WMDRM to play or  
copy protected content. Revocation does not affect unprotected content. When you  
download licenses for protected content, you agree that Microsoft may include a  
revocation list with the licenses. Content owners may require you to upgrade  
WMDRM to access their content. If you decline an upgrade, you will not be able to  
access content that requires the upgrade.  
• Depending on the security software installed on a connected PC  
and the setting of such software, network connection may be  
blocked.  
• Problems with the PC may cause malfunctions.  
Pioneer is not responsible for any malfunction of the player and/or  
the Home Media Gallery features due to communication error/  
malfunctions associated with your network connection and/or your  
PC, or other connected equipment. Please contact your PC  
manufacturer or Internet service provider.  
This product is protected by certain intellectual property rights of Microsoft. Use or  
distribution of such technology outside of this product is prohibited without a license  
from Microsoft.  
30  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Home Media Gallery  
06  
• See the sections below for more information on each part of the  
Home Media Gallery.  
About the network settings  
This unit uses DHCP and Auto IP functionality to make all the  
network settings automatically.  
3
Press HOME MENU to exit the Home Media Gallery screen.  
If you are using a broadband router or a broadband modem with a  
DHCP server function, setup should be completely automatic with  
no manual settings required.  
Movie Navigator  
From the movie section of the Home Media Gallery you can browse  
and play all the compatible movie files found on your local area  
network (non-movie files are not displayed).  
Using the Home Media Gallery  
Before using the Home Media Gallery, make sure that you have  
connected the player to the network and made the necessary  
settings. See Network connection on page 14 and Setting up for  
network use on page 19 for more information.  
See also File compatibility on page 7 for more on compatible file  
types.  
1
If you haven’t already done so, select ‘Home Media Gallery’  
from the Home Menu, then ‘Movies’.  
HOME MEDIA  
GALLERY  
You should see a list of all the movie files found on the selected  
server, together with their playing times.  
1214 items  
All Movies  
Scallop-man 3  
1:31  
1:02  
1:31  
1:25  
1:33  
1:26  
1:57  
1:36  
1:18  
1:18  
Closer  
Discount store  
School of legend  
Advance in the future part-2  
The EEL  
Date: 12/01/2006  
Genre: Adventure  
Format: WMV  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
ENTER  
HOME  
MENU  
RETURN  
• When the movie length cannot be determined, it is displayed as  
“-:--”.  
1
Press HOME MENU and select ‘Home Media Gallery’ from  
the on-screen display.  
2
Use the / buttons to change the current selection  
(highlighted in yellow).  
On the left side of the screen you can see file information, such as  
the genre, date and file format, for the current selection.  
Home Menu  
3
Press ENTER to play the currently highlighted movie.  
Disc Navigator  
Home Media Gallery  
Video/Audio Adjust  
Initial Setup  
Press to start or resume playback from the last title played.  
Displaying the Movie Options menu  
Press to display the Movie Options menu:  
• Alternatively, press HOME MEDIA GALLERY.  
1214 items  
All Movies  
• The Home Media Gallery is only available when the network or  
server contains movies, photos or music files.  
Scallop-man 3  
Movie Options  
Closer  
Play from Beginning  
Add to Quicklist  
Discount store  
School of legend  
Advance in the future part-2  
The EEL  
Date: 12/01/2006  
Genre: Adventure  
Format: WMV  
2
Select ‘Movies’, ‘Photos’ or ‘Music’.  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
Home Media Gallery  
Movies  
Photos  
Music  
Play from Beginning: Play the selected movie from the  
beginning.  
Add to Quicklist: Add the selected movie to your Quicklist. The  
Quicklist feature is a useful way to organize movie files for handy  
selection and playback. The Quicklist can contain up to 25  
1
movies.  
• On selecting an option, a list of movies, photos or music files  
that the player finds on the selected server is displayed. From  
here you can browse, play and sort network files.  
Note  
1 Quicklists are lost in the following instances:  
• When you exit Movie Navigator.  
• When you change the server to which you are connected.  
31  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
06  
Using the Home Media Gallery  
Searching movies  
Displaying the Browse menu  
From the Search sub-menu you can enter a few (up to 20) characters  
of a movie title or genre. As each character is entered into the  
search field the search results are dynamically updated, narrowing  
down the list of movies until you can see the one you’re looking for.  
Press to display the Browse menu:  
1214 items  
All Movies  
Scallop-man 3  
1:31  
1:02  
1:31  
1:25  
1:33  
1:26  
1:57  
1:36  
1:18  
1:18  
Closer  
Discount store  
4 items  
Search Results  
School of legend  
Advance in the future part-2  
Scallop-man 3  
Say No  
1:31  
1:02  
1:31  
1:33  
All Movies  
The EEL  
Browse  
Search  
Sort  
Movie Sources  
School of legend  
Seesaw  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
S _  
Depending on the browse menu, certain options may not be  
selectable.  
Home Menu  
Exit  
All Movies: Display all movie files found on the selected server.  
• Use the /// and ENTER buttons to select characters  
from the keypad.  
Browse: Browse movies by Genre, Quicklist or Folders. See also  
Browsing movies below.  
• Select SHFT to toggle between upper and lower case.  
Search: Find a movie by entering a name (or a few letters) to  
search for. The search results are narrowed down as you enter  
more letters. See also Searching movies below.  
• Select SPC to insert a space.  
• Select DEL to delete the character at the current cursor position  
in the search field.  
Sort: Sort movies by date (oldest first or most recent first), or  
alphabetically by title or genre (‘A’ first or ‘Z’ first).  
• Select CLR to clear the search field.  
Movie Sources: Display servers on the network. See also Movie  
sources below.  
• Select DONE to close the keypad and select a movie or genre  
from the search results; select CANCEL to close the keypad and  
clear the search results.  
Browsing movies  
The Browse sub-menu gives you three ways to browse movies.  
Movie sources  
From the movie sources window you can see all the servers found  
on the network and change the selected server.  
1214 items  
All Movies  
Scallop-man 3  
1:31  
1:02  
1:31  
1:25  
1:33  
1:26  
1:57  
1:36  
1:18  
1:18  
Current server  
Closer  
Discount store  
School of legend  
Advance in the future part-2  
The EEL  
Go back  
Genres  
Quicklist  
Folders  
Movie Sources  
3 items  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
Family Room Media Center  
WMC  
DLNA  
WMC  
Living Room DVD Recorder  
Den Computer  
Microsoft  
Windows Media Connect  
2.0  
192.168.11.2  
Authorized  
Go back: Return to the previous menu.  
Genres: Display all movie genres and how many movies are in  
each one. Select a genre and press ENTER to see the list of  
movies in that genre.  
Pause  
SomeSongTil  
3:30  
Home Menu  
Exit  
Quicklist: Display a list of all the movies currently in your  
Quicklist. Press to display the Movie Options menu, where  
you can start playback or remove movies from the Quicklist:  
• Some servers found on the network may not be available for the  
following reasons:  
– The player is collecting file information from the server.  
– There are no playable movie files on the server.  
– This player is not authorized for the PC (Windows Media  
Connect only). See also Authorizing this player on page 36.  
24 items  
Movie Options  
Quicklist  
Scallop-man 3  
Closer  
Play from Beginning  
Remove  
Discount store  
• Servers not currently available appear with a lock icon ( ) in the  
server list.  
School of legend  
Advance in the future part-2  
The EEL  
Date: 12/01/2006  
Genre: Adventure  
Format: WMV  
World Baseball  
Dream on the way  
Finding a southpaw  
Dear Customer  
Folders: Display a list of folders and movie files. Select a folder  
and press ENTER to see the list of movies and subfolders within  
the folder. (The folder configuration may change depending on  
the server type.) When you play a file in this mode, continuous  
play of files in that folder does not occur.  
32  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Home Media Gallery  
06  
Displaying the Browse menu  
From the left-most column, press to display the Browse  
Photo Navigator  
The photo section of the Home Media Gallery allows you to browse  
and display all the compatible photo files found on your local area  
network (non-photo files are not displayed).  
menu:  
See also File compatibility on page 7 for more on compatible file  
types.  
Summer_Vacation  
1214 items  
1
If you haven’t already done so, select ‘Home Media Gallery’  
from the Home Menu, then ‘Photos’.  
You should see a list of albums from the selected server.  
All Photos  
Browse  
Search  
Sort  
Photo Sources  
Albums  
6 items  
Family  
Depending on the browse menu, certain options may not be  
selectable.  
My_Favorite  
School  
Sports  
Summer_Vacation  
Winter_Vacation  
All Photos: Display all photos found on the server.  
Browse: Browse photos by Album, Date, Quicklist or Folders.  
See also Browsing photos below.  
Search: Find a photo by entering a name (or a few letters) to  
search for. The search results are narrowed down as you enter  
more letters. See also Searching photos on page 34.  
2
Use the / buttons to change the current selection  
(highlighted in yellow).  
Sort: Sort photos by date (oldest first or most recent first), or  
alphabetically by name (‘A’ first or ‘Z’ first).  
3 Press ENTER to display the selected photo list.  
Photo Sources: Display servers on the network. See also Photo  
sources on page 34.  
Summer_Vacation  
1214 items  
Browsing photos  
The Browse sub-menu gives you several ways to browse photos.  
File: sample.jpg  
Date: 12/06/2006  
Resolution: 2196  
Format: JPEG  
x
1298  
Summer_Vacation  
1214 items  
4
Use the /// buttons to change the current  
thumbnail selection (highlighted in yellow).  
Press to start or resume slideshow playback from the last photo  
displayed.  
Go back  
Albums  
Date  
Quicklist  
Folders  
Displaying the Photo Options menu  
• Go back: Return to the previous menu.  
Press ENTER to display the Photo Options menu:  
Albums: Display a list of server albums.  
• Date: Browse photos by date (year and month). Select a year  
then press ENTER to further browse by month. Select a month  
and press ENTER to see the photos taken that month.  
Summer_Vacation  
1214 items  
Photo Options  
Slideshow  
Quicklist: Display thumbnails of all the photos currently in your  
Quicklist. Press ENTER to display the Photo Options menu,  
where you can start slideshow playback or remove photos from  
the Quicklist:  
Add to Quicklist  
File: sample.jpg  
Date: 12/06/2006  
Resolution: 2196  
Format: JPEG  
x
1298  
Quicklist  
24 items  
Photo Options  
Slideshow: Starts full-screen slideshow playback from the  
currently selected photo. During the slideshow, press to  
advance to the next photo; to go back to the previous photo;  
to pause the slideshow; to stop and exit the slideshow;  
ZOOM to enlarge the picture on the screen.  
Slideshow  
Remove  
File: sample.jpg  
Date: 12/06/2006  
Resolution: 2196  
Format: JPEG  
x
1298  
Add to Quicklist: Add the selected photo to your Quicklist. The  
Quicklist feature is a useful way to organize photos for handy  
selection and slideshow playback. The Quicklist can contain up  
1
to 25 photos.  
Note  
1 Quicklists are lost in the following instances:  
• When you exit Photo Navigator.  
• When you change the server to which you are connected.  
33  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
06  
Using the Home Media Gallery  
Folders: Display a list of folders and photo files. Select a folder  
and press ENTER to see a list of photos and subfolders within  
the folder. (The folder configuration may change depending on  
the server type.) When you play a file in this mode, continuous  
play of files in that folder does not occur.  
Music Navigator  
From the music section of the Home Media Gallery you can browse  
and play all the compatible song files found on your local area  
network (non-music files are not displayed).  
See also File compatibility on page 7 for more on compatible file  
types.  
Searching photos  
From the Search sub-menu you can enter a few (up to 20) characters  
of a photo title. As each character is entered into the search field the  
search results are dynamically updated, narrowing down the list of  
photos until you can see the one you’re looking for.  
1
If you haven’t already done so, select ‘Home Media Gallery’  
from the Home Menu, then ‘Music’.  
You should see a list of all the artist names found on the selected  
server.  
Loading...  
5 items  
Search Results  
Artists  
1214 items  
Black Pappers  
1
2
4
1
1
1
4
2
5
2
Album  
Albums  
Albums  
Album  
Album  
Album  
Albums  
Albums  
Albums  
Albums  
David Jack  
Eric Gilberto  
King  
R _  
Michael Beck  
Pioneer All Stars  
Rock'n Roll Brothers  
The Fishes  
Treetop  
William And Marry  
Home Menu  
Exit  
2
Use the / buttons to change the current selection  
See Searching movies on page 32 for how to use the screen keypad.  
(highlighted in yellow).  
3
Press ENTER to display the Album list.  
Photo sources  
From the photo sources window you can see all the servers found on  
the network and change the selected server. See Movie sources on  
page 32 for more information.  
Pioneer All Stars  
1214 items  
Acoustic Guitar  
Best of Pioneer All Stars  
Cooking Or Eating  
Family  
20 Songs  
13 Songs  
10 Songs  
12 Songs  
18 Songs  
11 Songs  
18 Songs  
10 Songs  
13 Songs  
21 Songs  
Good!!  
Morning Glory  
Poker Face  
Song for You  
Tokyo  
Two-Tone  
4
Select the Album you want to listen to and press ENTER to  
display the Song list.  
Acoustic Guitar  
1214 items  
Electrified  
9:31  
8:00  
7:31  
3:55  
6:33  
5:26  
4:57  
9:36  
6:18  
6:18  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Go  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
Artist: Pioneer All Stars  
Album: Acoustic Guitar  
Genre: Rock  
Format: WMA  
Rush Street  
Take The Time  
• When the movie length cannot be determined, it is displayed as  
“-:--”.  
5
Use the / buttons to change the current selection  
(highlighted in yellow).  
On the left side of the screen you can see file information, such as  
the artist and album name, genre and file format, for the current  
selection.  
6
Press ENTER to play the currently highlighted music.  
The display shows the Now Playing screen.  
• Press to start or resume playback from the last track played  
on the Now Playing screen.  
34  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Home Media Gallery  
06  
Browsing songs  
Displaying the Song Options menu  
The Browse sub-menu gives you various ways to browse songs.  
Press to display Song Options menu:  
Acoustic Guitar  
1214 items  
Acoustic Guitar  
1214 items  
Song Options  
Electrified  
9:31  
8:00  
7:31  
3:55  
6:33  
5:26  
4:57  
9:36  
6:18  
6:18  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Go  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
Electrified  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Gohe  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
Play song  
Add to Quicklist  
Artist: Pioneer All Stars  
Artist:Depeche Mode  
Go back  
Artists  
Album: Acoustic Guitar  
Album: Remixes 81-04  
Genre: Rock  
Genre: Alternative  
Format: WMA  
Format:WMA  
Albums  
Genres  
Playlists  
Quicklist  
Folders  
Rush Street  
Take The Time  
Rush Street  
Take The Time  
Go back: Return to the previous menu.  
Play Song: Play the selected song from the beginning.  
Artists: Display a list of artists, and how many albums are  
associated with each. Select an artist and press ENTER to see  
the album list by that artist.  
Add to Quicklist: Add the selected song to your Quicklist. The  
Quicklist feature is a useful way to organize music files for handy  
selection and playback. The Quicklist can contain up to 25  
Albums: Display a list of albums, and how many songs are  
associated with each. Select an album and press ENTER to see  
the list of songs on that album.  
1
songs.  
Displaying the Browse menu  
Genres: Display all music genres, and how many songs are in  
each one. Select a genre and press ENTER to see the list of  
artists in that genre.  
Press to display the Browse menu:  
Playlists: Display the server Playlists.  
Acoustic Guitar  
1214 items  
Quicklist: Display a list of all the songs currently in your  
Quicklist. Press to display the Song Options menu, where  
you can start playback or remove songs from the Quicklist:  
Electrified  
9:31  
8:00  
7:31  
3:55  
6:33  
5:26  
4:57  
9:36  
6:18  
6:18  
End Of The Road  
Into The Arena  
Keep On Running  
Never Let You Go  
All Songs  
Open Your Eyes  
Browse  
Search  
Sort  
Now Playing  
Music Sources  
Pictures Of My Life  
Real Sound  
Quicklist  
24 items  
Song Options  
Rush Street  
Electrified  
Take The Time  
End Of The Road  
Play song  
Remove  
Into The Arena  
Keep On Running  
Never Let You Go  
Open Your Eyes  
Pictures Of My Life  
Real Sound  
Artist: Pioneer All Stars  
Album: Acoustic Guitar  
Genre: Rock  
Depending on the browse menu, certain options may not be  
selectable.  
Format: WMA  
All Songs: Display all songs (files/tracks) found on the server.  
Rush Street  
Take The Time  
Browse: Browse songs by Artist, Album, Genre, Playlists,  
Quicklist or Folders. See also Browsing songs below.  
Folders: Display a list of folders and song files. Select a folder  
and press ENTER to see the list of songs and subfolders within  
the folder. (The folder configuration may change depending on  
the server type.) When you play a file in this mode, continuous  
play of files in that folder does not occur.  
Search: Find a song by entering a name (or a few letters) to  
search for. The search results are narrowed down as you enter  
more letters. See also Searching songs below.  
Sort: Sort songs by date (oldest first or most recent first), or  
alphabetically by song title, artist, album or genre (‘A’ first or ‘Z’  
first).  
Searching songs  
From the Search sub-menu you can enter a few characters (up to 20)  
of a song title, genre, artist or album. As each character is entered  
into the search field the search results are dynamically updated,  
narrowing down the list of songs until you can see the one you’re  
looking for.  
Now Playing: Display song information (track name, artist,  
album, genre, etc.) and playback information. See also Now  
playing song information on page 36.  
Music Sources: Display servers on the network. See also Music  
sources on page 36.  
Loading•••  
4 items  
Search Results  
Reason  
1:31  
1:02  
1:31  
1:25  
Real Sound  
Rolling Dice  
Rush Street  
R _  
Home Menu  
Exit  
See Searching movies on page 32 for how to use the screen keypad.  
Note  
1 Quicklists are lost in the following instances:  
• When you exit Music Navigator.  
• When you change the server to which you are connected.  
35  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
06  
Using the Home Media Gallery  
Now playing song information  
The Now Playing screen shows detailed information about the song  
playing, including:  
About Windows Media Connect  
Windows Media Connect is software to deliver music, photos and  
movies from a Microsoft Windows XP computer to home stereo  
systems and TVs.  
• Artist and song title  
• Progress bar (elapsed time and song length)  
• Album name  
With this software, you can play back files stored on the PC through  
various devices wherever you like in your home.  
• Genre  
At this time you cannot download the Windows Media Connect  
software from Microsoft’s website. If your server currently does not  
have Windows Media Connect installed, install Windows Media  
Player 11 (for Windows XP) instead. This software can be  
downloaded from Microsoft’s website.  
• File format  
• Browse menu  
• Play status  
• Play mode  
For more information check the official Microsoft website.  
• Next/Previous song names  
Authorizing this player  
In order to be able to browse and play files from a Windows XP PC  
with Windows Media Connect this player must be authorized. This  
happens automatically when the player makes a connection over  
the network to the PC. If not, please authorize this player manually  
on the PC.  
Now Playing  
Pioneer All Stars  
Real Sound  
Acoustic Guitar  
Genre: Rock  
Format: MP3  
3:10 / 5:51  
All Songs  
Browse  
Search  
Sort  
Now Playing  
Music Sources  
For more information on authorizing this player, refer to the  
instruction manual of your server.  
Previous Song  
Pictures Of My  
Next Song  
Rush Street  
FAQ  
Music sources  
From the music sources window you can see all the servers found  
on the network and change the selected server. See Movie sources  
on page 32 for more information.  
• Some files don’t show up. Where are they?  
– File names that don’t end with one of the permitted extensions  
won’t be recognized by this player. See also File compatibility on  
page 7.  
– Supported file formats vary by server. As such, files not  
supported by your server are not displayed on this unit.  
For more information check with the manufacturer of your  
server.  
36  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video/Audio Adjust menu  
07  
Chapter 7  
Video/Audio Adjust menu  
From the Video/Audio Adjust menu you can make various settings that affect how video is presented on your TV and how the sounds. Items in the Video/Audio Adjust  
menu can only be changed during playback.  
Creating your own presets  
You can create up to three presets of your own.  
Video Adjust  
• Default setting: Standard  
1
2
Select one of the Memory presets.  
From the Video Adjust screen you can select the Standard or Cinema  
video presentation or define presets of your own in Memory 1 to 3.  
Press to select ‘Detailed Settings’ then press ENTER.  
1
Press HOME MENU and select ‘Video/Audio Adjust’ from  
the on-screen display.  
Memory 1  
You can press VIDEO ADJUST on the remote to display the Video  
Adjust screen.  
Detailed Settings  
3
Adjust the picture quality settings.  
• Use the / buttons to select a setting.  
Home Menu  
• Use the / buttons to adjust the current setting.  
Disc Navigator  
Home Media Gallery  
Video/Audio Adjust  
Initial Setup  
Memory 1  
White Level  
Black Level  
Hue  
Min  
Min  
Max  
Max  
Red  
Max  
Green  
Min  
Chroma Level  
2
3
Select ‘Video Adjust’.  
Use the / buttons to select a preset.  
Select a setting then press ENTER to display just that setting. This  
gives you more screen area in which to see the effects of changes  
you make.  
Standard  
Detailed Settings  
Memory 1  
Standard – Standard setting  
White Level  
Min  
Max  
1
Cinema – Optimized for watching movies  
Memory1/Memory2/Memory3 – Use for saving your own  
presets (see Creating your own presets below)  
• Press ENTER or RETURN to go back to full-screen display.  
You can adjust any or all of the following picture quality settings:  
4
Press ENTER or RETURN to make the setting and exit the  
1
White Level – Adjusts the intensity of white.  
Video Adjust screen.  
1
Black Level – Adjusts the intensity of black.  
PureCinema  
Hue – Adjusts the overall colour balance between red and  
green.  
There are two types of video signals: Video material, with a frame  
rate of 25 or 30 frames/second; and film material, that has a frame  
rate of 24 frames/second.  
Chroma Level – Adjusts how saturated colours appear.  
4
Press RETURN to save the preset and exit the Detailed  
In PureCinema mode film material is converted to 50 or 60 frames/  
second progressive for an exceptionally clear picture. Video output  
at 24 frames/second is converted to 60 frames/second.  
Settings screen.  
For film material or sources otherwise recorded with a frame rate of  
24 frames/second, video is output in PureCinema mode even if you  
have Video Adjust set to Standard, Cinema, or Memory 1, 2 or 3.  
Additionally, for PAL movie discs (25 frames/second BD-ROM or  
DVD discs) with film material or sources not correctly recorded at a  
frame rate of 24 frames/second, film materials are output in  
PureCinema even if you have the Video Adjust set to Cinema. If you  
notice problems with the images projected when set to Cinema  
(images appear to move, or zigzag), set the Video Adjust to Standard  
or Memory 1, 2 or 3.  
Note  
1 Effective only for video output from HDMI OUT or COMPONENT VIDEO OUT connections (settings do no affect video output from VIDEO OUT or S-VIDEO OUT).  
37  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
07  
Video/Audio Adjust menu  
Audio Adjust  
From the Audio Adjust menu you can set the Audio DRC (Dynamic  
Range control).  
Audio DRC  
• Default setting: Off  
When watching Dolby Digital BD and DVD discs, as well as PC files  
with Dolby Digital audio, at low volume, it’s easy to lose the quieter  
sounds completely — including some of the dialog. Switching  
Audio DRC to On can help by bringing up the quieter sounds, while  
controlling loud peaks.  
How much of a difference you hear depends on the material you’re  
listening to. If the material doesn’t have wide variations in volume,  
you may not notice much change.  
Important  
• Audio DRC is effective with the following types of audio:  
– Analog audio from the AUDIO OUT (2ch) and AUDIO OUT  
(5.1ch) jacks.  
– PCM audio from the DIGITAL AUDIO OUT and HDMI OUT  
jacks (see also About the audio output settings on page 42).  
1
Press HOME MENU and select ‘Video/Audio Adjust’ from  
the on-screen display.  
Home Menu  
Disc Navigator  
Home Media Gallery  
Video/Audio Adjust  
Initial Setup  
2
Select ‘Audio Adjust’.  
Video/Audio Adjust  
Video Adjust  
Audio Adjust  
3
Highlight Audio DRC, then use the / buttons to change  
to ‘Off’, ‘Level 1’, ‘Level 2’ or ‘Max’ as required.  
Audio Adjust  
Audio DRC  
Max  
Off  
4
Press ENTER or RETURN to make the setting and exit the  
Audio Adjust screen.  
38  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup menu  
08  
CIhnapitteira8 l Setup menu  
Using the Initial Setup menu  
The Initial Setup menu is where you can set various player options for sound, picture, language and so on. Note that settings can only be  
changed when the player is stopped.  
If you disconnect the player from the wall outlet before switching the player off, any new settings made during that session will be lost.  
Press HOME MENU and select ‘Initial Setup’.  
In the table below, the default option is marked with a •.  
Setting  
Options  
Explanation  
Video Out  
4:3 (Standard)  
Select if you have a standard 4:3 TV. See Changing the output video resolution on page 12.  
When the Output Video Resolution is set to 720p, 1080i or 1080p, video is output in 16:9 widescreen  
format even if TV Aspect Ratio is set to 4:3 (Standard). When connected to a 4:3 TV, set the Output  
Video Resolution to 576i/480i or 576p/480p. See also Changing the output video resolution on  
page 12.  
TV Aspect Ratio  
16:9 (Widescreen) •  
Select if you have a widescreen 16:9 TV.  
Full  
4:3 video material is output without black bars on either side of the picture if the TV Aspect Ratio  
4:3 Video Out  
setting (above) is set to 16:9 (Widescreen).  
Normal •  
4:3 video material is output with black bars on either side of the picture if the TV Aspect Ratio setting  
(above) is set to 16:9 (Widescreen).  
Letter Box •  
Pan & Scan  
If the TV Aspect Ratio setting (above) is set to 4:3 (Standard), select this if you prefer letterbox  
presentation of 16:9 format DVDs.  
DVD 16:9 Video Out  
If the TV Aspect Ratio setting (above) is set to 4:3 (Standard), select this if you prefer Pan & Scan  
presentation of 16:9 format DVDs.  
Some discs contain only Letter Box or Pan & Scan presentation so the video output will depend on the disc.  
YCbCr •  
This is the standard setting for HDMI-compatible devices.  
HDMI Color Space  
RGB (16–235)  
RGB (0–255)  
Use this setting if colours appear overly rich and the black too deep on the RGB (0–255) setting.  
Use if colours are weak and black appears to ‘float’ on the RGB (16–235) setting.  
When using an HDMI monitor that accepts only RGB input, this player outputs RGB video even if this setting is set to YCbCr. If the monitor is DVI-compatible, the player  
outputs RGB (0–255) colour space. If however the picture looks unnatural, set it to RGB (16–235).  
On  
Gives smooth movement in BD/DVD film material video. This setting is only effective when the player  
is connected to a 1080/24p-compatible TV using HDMI.  
24p Direct Out  
Off •  
Choose this setting if you notice picture disturbance when the video switches between video and  
film material.  
When 24p Direct Out is On, you may experience some picture disturbance when the video switches between video and film material. See also Changing the output video  
resolution on page 12.  
39  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
08  
Initial Setup menu  
Setting  
Options  
Explanation  
Audio Out  
Dolby Digital •  
Outputs a Dolby Digital signal when a Dolby Digital source is being played.  
Dolby Digital Out  
Dolby Digital PCM  
Converts Dolby Digital sources to Linear PCM output. Use if your connected equipment doesn’t  
support Dolby Digital audio.  
This setting is effective in digital audio outputs.  
DTS •  
Outputs a DTS signal when a DTS source is being played.  
DTS Out  
DTS PCM  
Converts sources with DTS audio to Linear PCM output. Use if your connected equipment doesn’t  
support DTS audio.  
This setting is effective in digital audio outputs.  
Stereo •  
If you’ve selected DTS PCM in DTS Out above, you can choose the way the DTS signal is down-  
DTS Downmix  
mixed PCM audio. Stereo downmixes the signal to 2-channel stereo.  
Lt/Rt  
Downmixes to a 2-channel signal compatible with Dolby surround matrix decoders. (This allows you  
to hear surround sound if your AV receiver or amplifier has Dolby Pro Logic capability.)  
Auto •  
PCM  
Dolby Digital and DTS sources are output as a bitstream signal. However, depending on the HDMI  
device connected and the content being played, Linear PCM audio may be output.  
HDMI Audio Out  
All audio signals are converted to Linear PCM.  
Language  
English •  
Sets the language of the on-screen displays to English.  
OSD Language  
available languages  
Choose from the languages displayed for the on-screen displays.  
English •  
Sets both the BD-ROM and DVD-Video default audio language to English.  
Audio Language  
available languages  
Choose from the languages displayed to set the default audio language for BD-ROM and DVD-Video  
playback.  
Other  
Continue to the next screen to set the default audio language for BD-ROM and DVD-Video disc  
playback. You can select the language name or enter the code number (see on page 47 for the code  
list).  
Discs do not necessarily have audio in your selected language. Also, some discs override the Audio Language preference.  
English •  
Sets the default subtitle language for BD-ROM and DVD-Video playback to English.  
Subtitle Language  
available languages  
Other  
Choose from the languages displayed to set the default subtitle language for BD-ROM and  
DVD-Video playback.  
Continue to the next screen to set the default subtitle language for BD-ROM and DVD-Video disc  
playback. You can select the language name or enter the code number (see on page 47 for the code  
list).  
Discs do not necessarily have subtitles in your selected language. Also, some discs override the Subtitle Language preference.  
w/Subtitle Language  
available languages  
Other  
Sets the language of BD-ROM and DVD-Video menus to the same as that set for the subtitle  
language.  
BD/DVD Menu  
Language  
Choose from the displayed languages to set the default language for BD-ROM and DVD-Video  
menus.  
Continue to the next screen to set the default menu language for BD-ROM and DVD-Video disc  
menus. You can select the language name or enter the code number (see on page 47 for the code  
list).  
Discs do not necessarily have menus in your selected menu language.  
On •  
Off  
Select to have BD-ROM and DVD-Video discs display subtitles.  
Select to switch off subtitle display.  
Subtitle Display  
Some discs may override these settings.  
Parental Lock  
Next Screen  
Set or change the password necessary to play BD or DVD discs that have level/age restrictions. In  
order to change the password, you’ll need to first enter your existing one.  
Change Password  
(Set Password)  
Change Level  
Enter your password and then set the parental lock level. Discs with a lock level higher than that set  
in the player will require the password to play.  
DVD Parental Lock  
DVD Country Code  
Enter your password and then set a country/area code. This ensures that you see the scenes  
intended for your country or area. See BD/DVD country/area code list on page 47.  
Change Age  
Restriction  
Enter your password and then set the age restriction.  
“255” indicates no parental control.  
BD Parental Lock  
Only certain discs have parental lock features. Check the disc packaging to see what features the disc has. If you forget your password you can reset it by resetting the player  
to its factory settings. See BD/DVD language code list on page 47.  
40  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup menu  
08  
Setting  
Options  
Explanation  
Network  
Next Screen  
Next Screen  
Next Screen  
Continue to the next screen to input IP address details. See Setting up for network use on page 19 for  
more detailed information.  
IP Configuration  
Continue to the next screen to set the name of this player as it will appear to other devices on the  
network. See Setting up for network use on page 19 for more detailed information.  
Device Name  
Continue to the next screen to see a summary of your network settings.  
Display Network  
Config.  
Speakers  
2 Channel •  
5.1 Channel  
Next Screen  
Set if you connected this player to an amplifier using only the front left/right channels of the AUDIO  
OUT (5.1ch) outputs.  
Audio Output Mode  
Set if you connected this player to an amplifier using all 5.1 channels of the AUDIO OUT (5.1ch) out-  
puts. On this setting the audio output from the AUDIO OUT (2ch) jacks will be incorrect.  
Continue to the next screen to specify which speakers are connected to your system.  
This setting affects how audio is output from the multi-channel analog outputs. See Speaker Setup  
on page 43 for more detailed information.  
Speaker Setup  
Options  
On •  
The player displays operation displays (Stop, Play, etc.) on-screen.  
On Screen Display  
Off  
Switches off the on-screen operation displays.  
Next Screen  
Enter your password and then set a country/area code. This ensures that you see the scenes  
intended for your country or area. See BD/DVD country/area code list on page 47.  
BD Country Code  
Auto Power Off  
On •  
If the player is stopped or paused for more than 30 minutes with no operation by the user, the player  
automatically switches itself off.  
Off  
No automatic power off.  
Start  
On •  
Off  
Select to start the Setup Navigator. See also Switching on and setting up on page 18.  
Select when using the HDMI Control function. See HDMI Control on page 5.  
Select when not using the HDMI Control function. See HDMI Control on page 5.  
Playback the BD portion.  
Setup Navigator  
HDMI Control  
BD •  
DVD  
CD  
Set hybrid disc  
playback layer  
Playback the DVD portion. When no DVD portion is present, the BD portion is played back.  
Playback the CD portion. When no CD portion is present, the BD portion is played back.  
This setting cannot be changed when a disc is inserted in the disc tray.  
41  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
08  
Initial Setup menu  
About the audio output settings  
The table below shows how the audio settings you make in the Initial Setup menu (page 39) affect the output to the analog (2ch/5.1ch), digital  
and HDMI outputs with various types of disc/files.  
Analog outputs  
Digital outputs  
HDMI output  
Disc audio format  
BD-ROM  
*1  
*1  
*2  
*3  
*4  
*4  
2ch  
5.1ch  
PCM convert  
Bitstream  
PCM  
Auto  
*11  
*9  
*8, 11  
Dolby Digital  
2ch downmix PCM 5.1ch PCM  
2ch downmix PCM  
2ch downmix PCM  
2ch downmix PCM  
2ch downmix PCM  
2ch downmix PCM  
Dolby Digital  
Dolby Digital  
Dolby Digital  
5.1ch PCM  
7.1ch PCM  
5.1ch PCM  
5.1ch PCM  
5.1ch PCM  
7.1ch PCM  
5.1ch PCM  
Dolby Digital  
Dolby Digital  
Dolby Digital  
*5, 11  
*6, 11  
*9  
*5, 8, 11  
*6, 8, 11  
Dolby Digital plus 2ch downmix PCM 5.1ch PCM  
*14  
*9  
2ch downmix PCM 5.1ch PCM  
2ch downmix PCM 5.1ch PCM  
2ch downmix PCM 5.1ch PCM  
Dolby TrueHD  
DTS  
*11  
*9  
*8, 11  
DTS  
DTS  
*15  
*7, 11  
DTS  
*9  
*7, 8, 11  
DTS  
DTS-HD  
*9, 12,13  
*9, 10,12  
*9, 12,13  
2ch downmix PCM 5.1ch downmix PCM  
*10  
2ch downmix PCM 2ch downmix PCM  
2ch downmix PCM 2ch downmix PCM  
Linear PCM 7.1ch  
Linear PCM 5.1ch  
7.1ch PCM  
5.1ch PCM  
*9, 10,12  
2ch downmix PCM  
2ch PCM  
5.1ch PCM  
2ch PCM  
*12  
*12  
2ch PCM  
2ch PCM  
Linear PCM 2ch  
Dolby Digital  
2ch PCM  
2ch PCM  
*9  
*9  
*8  
2ch downmix PCM 5.1ch PCM  
2ch downmix PCM 5.1ch PCM  
2ch downmix PCM Dolby Digital  
2ch downmix PCM DTS  
DVD-Video  
5.1ch PCM  
Dolby Digital  
*8  
DTS  
5.1ch PCM  
2ch PCM  
DTS  
MPEG  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
2ch PCM  
Linear PCM  
2ch PCM  
*1  
2 Channel or 5.1 Channel setting (see Audio Output Mode on page 41).  
*2  
*3  
*4  
*5  
*6  
*7  
*8  
*9  
Dolby DigitalPCM or DTSPCM setting (see Dolby Digital Out and DTS Out on page 40).  
Dolby Digital or DTS setting (see Dolby Digital Out and DTS Out on page 40).  
PCM or Auto setting (see HDMI Audio Out on page 40).  
Only the independent substream is output.  
Only the Dolby substream is output.  
Only the core substream is output.  
If the HDMI device you are using is not compatible with these compressed formats, the signal is output as linear PCM.  
If the connected HDMI device is compatible with fewer channels of Linear PCM audio than this player, the output will be adjusted to be compatible with the HDMI device.  
*10  
*11  
*12  
*13  
*14  
*15  
Outputs 2ch downmix PCM when the sampling rate is 192 kHz.  
Even if there is interactive audio, interactive audio is not mixed.  
Interactive audio is not mixed when the sampling rate is 192 kHz or 96 kHz.  
When the video output of HDMI is 576i/480i or 576p/480p, output sampling rate is automatically downsampled to 48 kHz.  
Dolby Digital sound is output.  
DTS sound is output.  
Note  
• Output sampling rate is 48 kHz through the digital audio outputs.  
• MPEG audio is always output as linear PCM.  
42  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup menu  
08  
Speaker Setup  
You only need to make this setting if you connected this player to your  
amplifier using the 5.1 channel analog outputs.  
This setting does not affect any digital audio output.  
Use the Speaker Setup screen to tell the player what kinds of  
speakers you have connected.  
1
2
3
4
Press HOME MENU and select ‘Initial Setup’.  
Select ‘Speakers’.  
Select ‘Speaker Setup’, then ‘Next Screen’.  
Use the / buttons to select a speaker.  
Initial Setup  
Video Out  
Audio Out  
Language  
Parental Lock  
Network  
Speaker Setup  
C
Yes  
Yes  
Ls/Rs  
Spekaers  
Options  
L/R  
Large  
5
Use the / buttons to change the speaker setup.  
Specify which speakers you have in your setup:  
C (Center): Yes or No  
Ls/Rs (Surround): Yes or No  
L/R (Main): Small or Large  
(This setting is only applicable if the C and Ls/Rs speakers are  
present.)  
6
Press ENTER to save the settings and exit the Speaker Setup  
screen.  
43  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
Additional information  
Chapter 9  
Additional information  
Damaged and odd-shaped discs  
Taking care of your player and discs  
Discs spin at high speed inside the player. If you can see that a disc  
is cracked, chipped, warped, or otherwise damaged, don’t risk using  
it in your player — you could end up damaging it.  
Handling discs  
When holding discs of any type, take care not to leave fingerprints,  
dirt or scratches on the disc surface. Hold the disc by its edge or by  
the center hole and edge.  
Damaged or dirty discs can affect playback performance. Take care  
also not to scratch the label side of the disc. Although not as fragile  
as the recorded side, scratches can still result in a disc becoming  
unusable.  
Should a disc become marked with fingerprints, dust, etc., clean  
using a soft, dry cloth, wiping the disc lightly from the center to the  
outside edge as shown in the diagram below.  
This player is designed for use with conventional, fully circular discs  
only. Use of shaped discs is not recommended for this product.  
Pioneer disclaims all liability arising in connection with the use of  
shaped discs.  
Do not use any kind of adapter when playing 8 cm DVD discs. This  
size disc can be played in this player without an adapter; just use the  
smaller disc guide in the disc tray.  
Cleaning the pickup lens  
Wipe lightly from the center of the disc using straight strokes.  
Don’t wipe the disc surface using circular strokes.  
The player’s lens should not become dirty in normal use, but if for  
some reason it should malfunction due to dust or dirt, consult your  
nearest Pioneer-authorized service center. Although lens cleaners  
for DVD players are commercially available, we advise against using  
them since some may damage the lens.  
Problems with condensation  
If necessary, use a cloth soaked in alcohol, or a commercially  
available DVD/BD cleaning kit to clean a disc more thoroughly.  
Never use benzine, thinner or other cleaning agents, including  
products designed for cleaning vinyl records.  
Condensation may form inside the player if it is brought into a warm  
room from outside, or if the temperature of the room rises quickly.  
Although the condensation won’t damage the player, it may  
temporarily impair its performance. For this reason you should leave  
it to adjust to the warmer temperature for about an hour before  
switching on and using.  
Storing discs  
Although BD and DVD discs are more durable than vinyl records,  
you should still take care to handle and store discs correctly. When  
you’re not using a disc, return it to its case and store upright. Avoid  
leaving discs in excessively cold, humid, or hot environments  
(including under direct sunlight).  
Don’t glue paper or put stickers onto the disc, or use a pencil, ball-  
point pen or other sharp-tipped writing instrument. These could all  
damage the disc.  
For more detailed care information see the instructions that come  
with discs.  
Do not load more than one disc into the player at a time.  
44  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
09  
Hints on installation  
Resetting the player  
We want you to enjoy using this product for years to come, so please  
bear in mind the following points when choosing a suitable location  
for it:  
Use this procedure to reset all the player’s settings to the factory  
default.  
1
Make sure that the player is off.  
Do...  
2
Press STANDBY/ON and wait until ‘NO DISC,’ ‘BD-ROM,’  
• Use in a well-ventilated room.  
or ‘DVD’ displays on the front panel.  
It can take up to one minute for the system to start once you press  
STANDBY/ON.  
• Place on a solid, flat, level surface, such as a table, shelf or  
stereo rack.  
3
Press and hold STOP and press STANDBY/ON.  
• The player turns off with all settings reset.  
Don’t...  
• Use in a place exposed to high temperatures or humidity,  
including near radiators and other heat-generating appliances.  
• Place on a window sill or other place where the player will be  
exposed to direct sunlight.  
Setting up the remote to control your  
TV  
• Use in an excessively dusty or damp environment.  
• Place directly on top of an amplifier, or other component in your  
stereo system that becomes hot in use.  
1
Input the manufacturer code.  
While holding down the TV CONTROL button, input the two digit  
code from the table below that corresponds to the make of your TV.  
• Place the player on top of or immediately next to the television or  
monitor as you may experience interference.  
For example, if you have a Pioneer TV, press and hold TV CONTROL ,  
then press 0, 0 on the remote control.  
• Use in a kitchen or other room where the player may be exposed  
to smoke or steam.  
• Use on a thick rug or carpet, or cover with cloth — this may  
prevent proper cooling of the unit.  
2
Confirm that the TV is responding to the programmed  
code.  
On the remote, press the TV CONTROL button. If the TV switches  
on (or into standby if it was on previously), then you have the correct  
code.  
• Place on an unstable surface, or one that is not large enough to  
support all four of the unit’s feet.  
If nothing happens when you press the TV CONTROL button,  
start again from step 1 using a different code. Some manufacturers  
have several codes. Try each one until you find the one that works.  
Moving the player  
If you need to move this unit, first remove the disc, if there’s one  
loaded, and close the disc tray. Next, press STANDBY/ON to  
switch the power to standby, checking that the power off indication  
in the display goes off. Wait at least 10 seconds. Lastly, disconnect  
the power cord.  
Never lift or move the unit during playback — discs rotate at a high  
speed and may be damaged.  
Screen sizes and disc formats  
BD-ROM and DVD-Video discs come in several different screen  
aspect ratios, ranging from TV programmes, which are generally 4:3,  
to CinemaScope widescreen movies, with an aspect ratio of up to  
about 7:3.  
Televisions, too, come in different aspect ratios; ‘standard’ 4:3 and  
‘widescreen’ 16:9.  
Widescreen TV users  
If you have a widescreen TV, the TV Aspect Ratio setting (page 39) of  
this player should be set to 16:9 (Widescreen).  
When you watch discs recorded in 4:3 format, you can use the TV  
controls to select how the picture is presented. Your TV may offer  
various zoom and stretch options; see the instructions that came  
with your TV for details.  
Please note that some movie aspect ratios are wider than 16:9, so  
even though you have a widescreen TV, these discs will still play in  
a ‘letter box’ style with black bars at the top and bottom of the  
screen.  
Standard TV users  
If you have a standard TV, the TV Aspect Ratio setting (page 39) of  
this player should be set to 4:3 (Standard).  
45  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
Additional information  
TV Preset code list  
Please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for  
the manufacturer in the list will not work for the model that you are using.  
Manufacturer Code(s)  
Manufacturer Code(s)  
Manufacturer Code(s)  
Manufacturer Code(s)  
ACURA 44  
FRONTECH 31, 42, 46  
FRONTECH/PROTECH 32  
FUJITSU 48  
MAGNAVOX 07, 10, 03, 12, 29  
MANESTH 39, 46  
MARANTZ 07  
SALORA 31, 32, 42, 43  
SAMBERS 49  
ADMIRAL 31  
AIWA 60  
SAMSUNG 07, 38, 44, 46, 69, 70  
SANYO 35, 45, 48, 21, 14, 91  
SBR 07, 34  
AKAI 32, 35, 42  
AKURA 41  
FUNAI 40, 46, 58  
GBC 32, 42  
MARK 07  
MATSUI 07, 39, 40, 42, 44, 47, 48  
MCMICHAEL 34  
MEDIATOR 07  
ALBA 07, 39, 41, 44  
AMSTRAD 42, 44, 47  
ANITECH 44  
GE 00, 01, 08, 07, 10, 11, 17, 02, 28, 18  
GEC 07, 34, 48  
SCHAUB LORENZ 42  
SCHNEIDER 07, 41, 47  
SEG 42, 46  
GELOSO 32, 44  
GENERAL 29  
MEMOREX 44  
METZ 31  
ASA 45  
ASUKA 41  
SEI 32, 40, 49  
GENEXXA 31, 41  
GOLDSTAR 10, 23, 21, 02, 07, 50  
GOODMANS 07, 39, 47, 48, 56  
GORENJE 38  
MINERVA 31, 53  
MITSUBISHI 09, 10, 02, 21, 31  
MULTITECH 44, 49  
NEC 59  
SELECO 31, 42  
AUDIOGONIC 07, 36  
BASIC LINE 41, 44  
BAUR 31, 07, 42  
BEKO 38  
SHARP 02, 19, 27, 67, 90  
SIAREM 32, 49  
SIEMENS 31  
GPM 41  
GRAETZ 31, 42  
NECKERMANN 31, 07  
NEI 07, 42  
NIKKAI 05, 07, 41, 46, 48  
NOBLIKO 49  
SINUDYNE 32, 39, 40, 49  
SKANTIC 43  
BEON 07  
BLAUPUNKT 31  
BLUE SKY 41  
BLUE STAR 18  
BPL 18  
GRANADA 07, 35, 42, 43, 48  
GRADIENTE 30, 57  
GRANDIN 18  
SOLAVOX 31  
SONOKO 07, 44  
SONOLOR 31, 35  
SONTEC 07  
NOKIA 32, 42, 52  
NORDMENDE 32, 36, 51, 52  
OCEANIC 31, 32, 42  
ORION 32, 07, 39, 40  
OSAKI 41, 46, 48  
OSO 41  
GRUNDIG 31, 53  
HANSEATIC 07, 42  
HCM 18, 44  
BRANDT 36  
BTC 41  
SONY 04  
SOUNDWAVE 07  
STANDARD 41, 44  
STERN 31  
BUSH 07, 41, 42, 44, 47, 56  
CASCADE 44  
CATHAY 07  
HINARI 07, 41, 44  
HISAWA 18  
HITACHI 31, 33, 34, 36, 42, 43, 54, 06, 10, 24, OSUME 48  
SUSUMU 41  
CENTURION 07  
CGB 42  
25, 18  
OTTO VERSAND 31, 32, 07, 42  
SYSLINE 07  
HUANYU 56  
PALLADIUM 38  
TANDY 31, 41, 48  
TASHIKO 34  
CIMLINE 44  
HYPSON 07, 18, 46  
ICE 46, 47  
PANAMA 46  
CLARIVOX 07  
CLATRONIC 38  
CONDOR 38  
PANASONIC 31, 07, 08, 42, 22  
PATHO CINEMA 42  
PAUSA 44  
TATUNG 07, 48  
IMPERIAL 38, 42  
INDIANA 07  
TEC 42  
TELEAVIA 36  
CONTEC 44  
INGELEN 31  
PHILCO 32, 42  
TELEFUNKEN 36, 37, 52  
TELETECH 44  
CROSLEY 32  
CROWN 38, 44  
CRYSTAL 42  
INTERFUNK 31, 32, 07, 42  
INTERVISION 46, 49  
ISUKAI 41  
PHILIPS 31, 07, 34, 56, 68  
PHOENIX 32  
TENSAI 40, 41  
PHONOLA 07  
THOMSON 36, 51, 52, 63  
THORN 31, 07, 42, 45, 48  
TOMASHI 18  
CYBERTRON 41  
DAEWOO 07, 44, 56  
DAINICHI 41  
DANSAI 07  
ITC 42  
PROFEX 42, 44  
ITT 31, 32, 42  
PROTECH 07, 42, 44, 46, 49  
QUELLE 31, 32, 07, 42, 45, 53  
R-LINE 07  
JEC 05  
TOSHIBA 05, 02, 26, 21, 53  
TOWADA 42  
JVC 13, 23  
DAYTON 44  
KAISUI 18, 41, 44  
KAPSCH 31  
RADIOLA 07  
ULTRAVOX 32, 42, 49  
UNIDEN 92  
DECCA 07, 48  
DIXI 07, 44  
RADIOSHACK 10, 23, 21, 02  
RBM 53  
KENDO 42  
UNIVERSUM 31, 07, 38, 42, 45, 46, 54  
VESTEL 07  
DUMONT 53  
ELIN 07  
KENNEDY 32, 42  
KORPEL 07  
RCA 01, 10, 15, 16, 17, 18, 61, 62, 09  
REDIFFUSION 32, 42  
REX 31, 46  
VICTOR 13  
ELITE 41  
KOYODA 44  
VOXSON 31  
ELTA 44  
LEYCO 07, 40, 46, 48  
LIESENK&TTER 07  
LOEWE 07  
ROADSTAR 41, 44, 46  
SABA 31, 36, 42, 51  
SAISHO 39, 44, 46  
WALTHAM 43  
EMERSON 42  
ERRES 07  
WATSON 07  
WATT RADIO 32, 42, 49  
WHITE WESTINGHOUSE 07  
YOKO 07, 42, 46  
ZENITH 03, 20  
FERGUSON 07, 36, 51  
FINLANDIA 35, 43, 54  
FINLUX 32, 07, 45, 48, 53, 54  
FIRSTLINE 40, 44  
FISHER 32, 35, 38, 45  
FORMENTI 32, 07, 42  
LUXOR 32, 42, 43  
M-ELECTRONIC 31, 44, 45, 54, 56, 07, 36, 51  
MAGNADYNE 32, 49  
MAGNAFON 49  
PIONEER 00, 31, 32, 07, 36, 42, 51  
46  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
09  
BD/DVD language code list  
Language (Language code letter), Language code  
Japanese (ja), 1001  
English (en), 0514  
French (fr), 0618  
German (de), 0405  
Italian (it), 0920  
Spanish (es), 0519  
Dutch (nl), 1412  
Russian (ru), 1821  
Chinese (zh), 2608  
Korean (ko), 1115  
Greek (el), 0512  
Catalan (ca), 0301  
Corsican (co), 0315  
Czech (cs), 0319  
Welsh (cy), 0325  
Danish (da), 0401  
Bhutani (dz), 0426  
Esperanto (eo), 0515  
Estonian (et), 0520  
Basque (eu), 0521  
Persian (fa), 0601  
Finnish (fi), 0609  
Fiji (fj), 0610  
Faroese (fo), 0615  
Frisian (fy), 0625  
Irish (ga), 0701  
Scots-Gaelic (gd), 0704  
Galician (gl), 0712  
Guarani (gn), 0714  
Gujarati (gu), 0721  
Hausa (ha), 0801  
Hindi (hi), 0809  
Indonesian (in), 0914  
Icelandic (is), 0919  
Hebrew (iw), 0923  
Yiddish (ji), 1009  
Javanese (jw), 1023  
Georgian (ka), 1101  
Kazakh (kk), 1111  
Greenlandic (kl), 1112  
Cambodian (km), 1113  
Kannada (kn), 1114  
Kashmiri (ks), 1119  
Kurdish (ku), 1121  
Kirghiz (ky), 1125  
Burmese (my), 1325  
Nauru (na), 1401  
Nepali (ne), 1405  
Norwegian (no), 1415  
Occitan (oc), 1503  
Oromo (om), 1513  
Oriya (or), 1518  
SPanjabi (pa), 1601  
Polish (pl), 1612  
Pashto, Pushto (ps), 1619  
Portuguese (pt), 1620  
Quechua (qu), 1721  
Rhaeto-Romance (rm), 1813  
Kirundi (rn), 1814  
Romanian (ro), 1815  
Kinyarwanda (rw), 1823  
Sanskrit (sa), 1901  
Sindhi (sd), 1904  
Sangho (sg), 1907  
Serbo-Croatian (sh), 1908  
Sinhalese (si), 1909  
lovak (sk), 1911  
Slovenian (sl), 1912  
Samoan (sm), 1913  
Shona (sn), 1914  
Serbian (sr), 1918  
Siswati (ss), 1919  
Sesotho (st), 1920  
Sundanese (su), 1921  
Swedish (sv), 1922  
Swahili (sw), 1923  
Tamil (ta), 2001  
Telugu (te), 2005  
Tajik (tg), 2007  
Thai (th), 2008  
Tigrinya (ti), 2009  
Turkmen (tk), 2011  
Tagalog (tl), 2012  
Setswana (tn), 2014  
Tonga (to), 2015  
Turkish (tr), 2018  
Tsonga (ts), 2019  
Tatar (tt), 2020  
Twi (tw), 2023  
Ukrainian (uk), 2111  
Urdu (ur), 2118  
Uzbek (uz), 2126  
Vietnamese (vi), 2209  
Volapük (vo), 2215  
Wolof (wo), 2315  
Xhosa (xh), 2408  
Yoruba (yo), 2515  
Zulu (zu), 2621  
Afar (aa), 0101  
Abkhazian (ab), 0102  
Afrikaans (af), 0106  
Amharic (am), 0113  
Arabic (ar), 0118  
Assamese (as), 0119  
Aymara (ay), 0125  
Azerbaijani (az), 0126  
Bashkir (ba), 0201  
Byelorussian (be), 0205  
Bulgarian (bg), 0207  
Bihari (bh), 0208  
Bislama (bi), 0209  
Bengali (bn), 0214  
Tibetan (bo), 0215  
Breton (br), 0218  
Latin (la), 1201  
Lingala (ln), 1214  
Laothian (lo), 1215  
Lithuanian (lt), 1220  
Latvian (lv), 1222  
Malagasy (mg), 1307  
Maori (mi), 1309  
Macedonian (mk), 1311  
Malayalam (ml), 1312  
Mongolian (mn), 1314  
Moldavian (mo), 1315  
Marathi (mr), 1318  
Malay (ms), 1319  
Croatian (hr), 0818  
Hungarian (hu), 0821  
Armenian (hy), 0825  
Interlingua (ia), 0901  
Interlingue (ie), 0905  
Inupiak (ik), 0911  
Somali (so), 1915  
Albanian (sq), 1917  
Maltese (mt), 1320  
BD/DVD country/area code list  
Country/Area, Country/Area code, Country/Area code letter  
Argentina, 0118, ar  
Australia, 0121, au  
Austria, 0120, at  
Belgium, 0205, be  
Brazil, 0218, br  
Finland, 0609, fi  
France, 0618, fr  
Germany, 0405, de  
Hong Kong, 0811, hk  
India, 0914, in  
Malaysia, 1325, my  
Mexico, 1324, mx  
Netherlands, 1412, nl  
New Zealand, 1426, nz  
Norway, 1415, no  
Singapore, 1907, sg  
Spain, 0519, es  
Switzerland, 0308, ch  
Sweden, 1905, se  
Taiwan, 2023, tw  
Canada, 0301, ca  
Chile, 0312, cl  
China, 0314, cn  
Indonesia, 0904, id  
Italy, 0920, it  
Japan, 1016, jp  
Pakistan, 1611, pk  
Philippines, 1608, ph  
Portugal, 1620, pt  
Thailand, 2008, th  
United Kingdom, 0702, gb  
United States of America, 2119, us  
Denmark, 0411, dk  
Korea, Republic of, 1118, kr  
Russian Federation, 1821, ru  
47  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
Additional information  
Troubleshooting  
Incorrect operation is often mistaken for trouble and malfunction. If you think there is something wrong with this component, please check  
the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being  
used. If the trouble cannot be rectified even after checking the points below, ask your nearest Pioneer authorized service center or your  
dealer to carry out repair work.  
Playback  
Problem  
Remedy  
The disc won’t play or is automatically  
ejected after loading.  
Make sure the disc is free from dirt and dust and is not damaged (see Taking care of your player and  
discs on page 44).  
Make sure the disc is loaded with the label side face-up and aligned properly in the disc tray guide.  
Incompatible region: If the region on a BD-ROM or DVD-Video disc does not match the region on the  
player, the disc cannot be used (see BD-ROM regions and DVD-Video regions on page 8).  
Condensation inside the player: Allow time for condensation to evaporate. Avoid using the player  
near an air-conditioning unit.  
Make sure the disc is compatible with this player (see Disc/content format playback compatibility on  
page 6).  
Picture freezes and the front panel and  
remote control buttons stop working.  
Press (stop), then start playback again ((play)).  
Press the front panel STANDBY/ON button to switch the power off, then switch back on and  
restart playback. If the power fails to switch off, press and hold STANDBY/ON for 20 seconds until  
the power switches off. Then switch on again by pressing STANDBY/ON.  
Unplug from the wall socket, then plug back in and switch on again by pressing STANDBY/ON to  
switch the player on.  
No picture/No colour.  
Incorrect video connections: Check that connections are correct and that plugs are inserted fully.  
Also check the video cable for damage.  
TV/monitor or AV amplifier settings are incorrect: Check the instruction manual of the connected  
equipment.  
Depending on your display, some of the settings may result in the picture disappearing. In this case,  
press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video  
resolution on page 12).  
Some BD-ROM discs output video only over HDMI.  
The video output is set to 720p/1080i/  
For copy-protection purposes, DVD-Video and some BD-ROM discs output 576i/480i or 576p/480p  
1080p, but the actual output is 576i/480i or over the component output.  
576p/480p.  
Screen is stretched or aspect does not  
change.  
The TV Aspect Ratio or 4:3 Video Out setting in the Initial Settings menu is incorrect. See TV Aspect  
Ratio and 4:3 Video Out on page 39 for how to set these correctly for your TV/monitor.  
When Output Video Resolution is set to 720p, 1080i or 1080p, video is output in 16:9 Widescreen  
format even if TV Aspect Ratio is set to 4:3 (Standard).  
Picture disturbance during playback or  
dark image.  
This player is compatible with Macrovision System copy guard. Some discs include a copy prevention  
signal, and when this type of disc is played back, stripes etc., may appear on some sections of the  
picture depending on the TV. This is not a malfunction.  
Due to the player’s copy protection circuits, connection of this device through a VCR or an AV  
selector may cause picture problems. This is not a malfunction.  
No audio, or audio is distorted.  
No audio is output during slow motion playback or when scanning contents.  
Check your amplifier/receiver’s settings (volume, input function, speaker settings, etc.).  
Check that the disc is free from dust and dirt, and that it is not damaged (Taking care of your player  
and discs on page 44).  
Check that all interconnects are firmly inserted.  
Check that the plugs and terminals are free of dirt, oxide, etc. and clean if necessary. Also check the  
cable for damage.  
Make sure the player’s output is not connected to the amplifier’s phono (turntable) inputs.  
Check the Audio Output Mode on page 41. If this is set to 5.1 Channel, output from the AUDIO OUT  
(2ch) jacks will be incorrect.  
Check the Speaker Setup on page 43.  
For copy-protection purposes, some BD-ROM discs only output audio over optical/coaxial and HDMI.  
When Audio CDs containing text files or such data are played back, sound is muted.  
The analog audio is OK, but there appears Check that the Dolby Digital Out and DTS Out settings (see Audio Out on page 40) are suitable for  
to be no optical/coaxial digital audio  
signal.  
your amplifier/receiver — check the instruction manual that came with your amplifier/receiver (also  
check that the output settings on your amplifier/receiver are correct).  
48  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
09  
Problem  
Remedy  
Cannot play multi-channel audio.  
Check the audio options available from the disc menu.  
Multi-channel 192 kHz audio is output in 2 channels.  
Check that the Dolby Digital Out and DTS Out settings (see Audio Out on page 40) are suitable for  
your amplifier/receiver — check the instruction manual that came with your amplifier/receiver.  
If you connected this player to your amplifier/receiver using the 5.1 channel analog outputs, make  
sure the Audio Output Mode on page 41 and Speaker Setup on page 43 are set correctly.  
If you connected this player to your amplifier/receiver using HDMI, or the optical/coaxial digital  
outputs, make sure that the output settings on your amplifier/receiver are correct (refer to the  
instruction manual that came with your amplifier/receiver).  
To use the 7.1ch setting for Dolby Digital Out, set Dolby Digital PCM.  
Noise is output when DTS audio is played. If this unit is connected to a non-DTS compatible amplifier or decoder using a digital audio cable, set  
DTS Out to DTSPCM. If you do not do this, noise will be output when you play a DTS disc.  
Cannot output 96 kHz or 192 kHz digital  
audio from optical/coaxial digital output.  
The player does not output digital audio from the optical/coaxial jacks at this sampling rate. The  
digital output is automatically downsampled.  
Disc containing PC files won’t play.  
Make sure the disc is compatible with this player (see Disc/content format playback compatibility on  
page 6).  
This player is compatible with multi-border discs, but only plays the first border.  
Check that the file complies to one of the supported formats, bit rates or profiles (see File  
compatibility on page 7). Also check that the file is not damaged.  
If the message Cannot play this format is displayed when you try to play PC files, check the file  
formats.  
This player cannot play DRM-protected content on DVD and DRM-protected titles appear in the Disc  
Navigator with a lock icon ( ).  
No picture or High Definition video output For copy-protection purposes, composite, S-video and component video output may not possible. See  
when watching a BD. Connecting for HDMI output on page 11 to connect using HDMI.  
Image is blurred when you begin playback Certain televisions cause blur effects when playback of a disc begins. This is not a malfunction.  
of a disc.  
Colours are not displayed properly on the When you have used the included video cables to connect this unit to a TV that does not support  
TV.  
either NTSC or PAL, some colours may not display correctly. For more information please refer to the  
operating instructions of your TV, and confirm the TV system settings of this unit.  
Tracks/files are repeated during random  
play.  
Because tracks/files are selected entirely at random, same tracks/files may be played in quick  
succession. For example, ‘Track 1’ may be followed by ‘Track 5,’ only to have ‘Track 1’ play again next.  
This is not a malfunction.  
SlideShows do not play.  
If you have selected a single file and select Slideshow from the Photo Options menu, then only that  
single file is played back. To play a Slideshow you must select All Photos from the Browse menu.  
Images no longer displayed when you  
change the 24p Direct Out setting to On.  
Depending on your display, some of the settings may result in the picture disappearing. In this case,  
press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video  
resolution on page 12).  
HDMI troubleshooting  
Problem  
Remedy  
This unit has been designed to be compliant with HDMI (High-Definition Multimedia Interface).  
Depending on the component you have connected, unreliable signal transfers may result.  
If you connect a DVI device to the HDMI output of this player, ensure that it is compliant with High-  
bandwidth Digital Content Protection (HDCP).  
No HDMI video output.  
(A connected HDMI component doesn’t  
work with this player.)  
If the front panel HDMI indicator is unlit then:  
– Make sure that you’ve selected this player as the HDMI input in the settings for the component  
you’re using. You may need to refer to the instruction manual of the component to do this.  
– Check that the HDMI cable is connected properly and that the cable isn’t damaged.  
If the front panel HDMI indicator is lit:  
– Depending on your display, some of the settings may result in the picture disappearing. In this case,  
press OUTPUT RESOLUTION repeatedly until the picture re-appears (see Changing the output video  
resolution on page 12).  
Depending on the HDMI cable being used, 1080p output may not appear correctly.  
Use a different HDMI Color Space setting (see HDMI Color Space on page 39).  
Colours are too rich or too weak, or black  
is too deep or appears to ‘float’.  
49  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
Additional information  
Problem  
Remedy  
If you have connected to an HDCP-compatible DVI component, there won’t be any audio output from  
the HDMI terminal. Connect using the optical/coaxial digital outputs (or the analog outputs).  
This player does not output multi-channel 192 kHz audio. Press AUDIO during playback to switch  
between the available audio streams.  
No HDMI audio output.  
HDMI Control does not function.  
•Verify that the HDMI cable is firmly connected.  
•Make sure that this unit’s HDMI Control is set to On (see HDMI Control on page 41).  
•Make sure that the HDMI Control for the connected components is set to On. For more information,  
refer to the operating manual for the connected component.  
•This function may not work properly if you have multiple components connected to a single plasma  
television, AV system (amplifier or AV receiver etc.), or HD AV Converter. For more information refer  
to the operating manual of your plasma television, AV system, or HD AV Converter.  
You can enable HDMI Control by turning the HDMI Control setting to On for all components  
connected via HDMI cable. Check the video output from this unit once you have completed  
making connections and settings for all components. You will need to check the video output  
each time you change connected components or remove the HDMI cable.  
•Check whether the connected component supports HDMI Control or not. For more information refer  
to the operating manual of your plasma television, AV system (amplifier or AV receiver etc.), or HD AV  
Converter.  
•Certain functions are not supported on some plasma televisions.  
•This player does not support HDMI Control-compatible components other than those made by  
Pioneer.  
•This unit will not function properly with components that do not support HDMI Control, or when  
connected with components other than those made by Pioneer.  
Network troubleshooting  
Problem  
Remedy  
LAN indicator is unlit:  
Home Media Gallery is not available.  
– Check the physical connections (hub, 100BASE-TX/10BASE-T or crossed cable and other cable  
quality when cabled directly to a PC).  
– If the player is connected to a network via a hub, make sure that the Ethernet (CAT-5 LAN) cable  
you’re using is a ‘standard’ or ‘straight through’ type.  
– If the player is connected directly to a PC, make sure that the Ethernet (CAT-5 LAN) cable you’re  
using is a ‘crossed’ or ‘crossover’ type.  
LAN indicator is lit:  
– If this player’s IP address is set automatically, make sure that the media server’s address is also set  
automatically. If the IP address of the media server has been set manually, set the IP address of the  
player manually too (see Network settings page 41).  
– Check the logical connections (IP address setup, DHCP, etc.). Confirm that the IP address is correct  
if acquired using DHCP or Auto-IP in the Network Config. screen that follows the Initial Setup menu  
(see Network settings page 41).  
– Confirm that the media server is on and not in standby or sleep mode.  
– Check the network and other settings on the media server.  
– Check that this player and the media server are on the same Local Area Network (LAN).  
– Check if the media server (Windows Media Connect or DLNA-compliant) is running. Restart if  
necessary.  
– Check if the media server is setup correctly for file sharing, if the target folder has been deleted or if  
one or more folders has become corrupted on the server.  
– Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.  
Confirm that the media server is on and not in standby or sleep mode.  
Check the network and other settings on the media server.  
Check that this player and the media server are on the same Local Area Network (LAN).  
Check if the media server (Windows Media Connect or DLNA-compliant) is running. Restart if  
necessary.  
A connected media server does not show  
up in the source list in the Home Media  
Gallery.  
Check if the media server is setup correctly for file sharing, if the target folder has been deleted or if  
one or more folders has become corrupted on the server.  
Check if the PC is operating properly. Reboot the PC after confirming its specifications and setup.  
Check that there are playable files on the media server.  
After adding a new media server, exit the Home Media Gallery then, after a few moments, re-enter it.  
Check the media server setup. If a client is registered (authorized) manually, the setup procedure  
may have to be run again.  
Check that there are playable files on the media server.  
A media server shows up in the source list  
but is not available (a lock icon (  
appears).  
)
After adding a new media server, exit the Home Media Gallery then, after a few moments, re-enter it.  
50  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
09  
Problem  
Remedy  
If the player cannot connect to the same server as last time (because it is switched off, for example),  
the player will connect to another server on the network. To see content on a particular server, make  
sure it is running and then select it as the source in the Home Media Gallery (see Movie sources on  
page 32).  
Content different from last time appears  
on the network (missing items, etc.).  
Check the physical connections (hub, 100BASE-TX/10BASE-T, or crossed cable and other cable  
quality when cabled directly to a PC).  
Cannot play or display.  
Check if the file complies to the supported format, bit rate or profile (see page 7). Also check if the file  
is damaged.  
If the message Cannot play this format is displayed when you try to play PC files, check the file  
formats.  
It takes time to capture and display a large-sized image; during this time you may have to wait to  
operate the player.  
This player cannot play DRM-protected content stored on a DLNA server (not Windows Media  
Connect server).  
Some files that comply with one of the supported formats may not play or be displayed.  
Check if there are too many files on the server.  
Check if the PC is operating properly. Reboot the PC after confirming its specification and setup.  
Check the physical connections (hub, 100BASE-TX/10BASE-T, or crossed cable and other cable  
quality when cabled directly to a PC). It is strongly recommended to use 100BASE-TX for playback  
quality and display speed.  
Image or sound is interrupted or distorted  
(block noise appears).  
When connected by a wireless LAN, check if the bit rate is sufficient.  
Check that the file complies with the supported format, bit rate or profile (see File compatibility on  
page 7). Also check if the file is damaged.  
Some files that comply with one of the supported formats may not play or be displayed.  
Check if the PC is operating properly. Reboot the PC after confirming its specification and setup.  
The configuration may change depending on server type. This is not a malfunction.  
Genre (movie), Playlist (music), Album  
(photo) or folder configuration differs from  
one server to another.  
Check if the server is correctly set up for file sharing, if the target folder has been deleted, or if one or  
more folders have been corrupted on the server.  
Check if there are too many files on the server.  
An available server is selected but cannot  
be navigated.  
Miscellaneous troubleshooting  
Problem  
Remedy  
It can take up to one minute for the system to start up once you press the STANDBY/ON button.  
This does not mean that the player is experiencing problems.  
It is taking a long time for the unit to start  
up.  
The Auto Power Off function switches the player into standby if no operation is performed for  
30 minutes while the player is stopped or paused. See Auto Power Off on page 41.  
The power automatically switches off.  
The CONTROL IN jack on the rear panel is connected: Point the remote control at the connected  
component to control this player.  
The remote control doesn’t seem to work.  
The remote control is too far from the player, or the angle with the remote sensor is too wide: Use the  
remote within its operating range (see Using the remote control on page 6).  
The batteries are exhausted: Put in new ones (see Putting the batteries in the remote control on  
page 6).  
If you are using an external IR receiver, you may need to set the IR RECEIVER switch (see Using an  
external IR receiver with this player on page 14).  
When the power is cut due to power failure or by unplugging the power cord during operation,  
settings will be cancelled. See Moving the player on page 45 for proper shutdown instructions.  
Settings are cancelled.  
When you have inserted a disc containing PC files, the time necessary to load the files contained on  
the disc varies by how many files are present. The process can take anywhere from a few minutes to  
upwards of ten minutes.  
After inserting a disc, a ‘Loading’ message  
is displayed but playback does not begin.  
Change the Set hybrid disc playback layer to DVD (see page 41).  
On hybrid discs with BD and DVD layers,  
the DVD layer cannot be played back.  
Change the Set hybrid disc playback layer to CD (see page 41).  
On hybrid discs with BD and CD layers,  
the CD layer cannot be played back.  
51  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
Additional information  
Problem  
Remedy  
When the layer set to playback at Set hybrid disc playback layer is not present on an inserted hybrid  
disc, the BD layer is played back.  
When the Set hybrid disc playback layer is  
set to DVD and you insert a hybrid disc  
with BD and CD layers, the BD layer is  
played back.  
You cannot change the Set hybrid disc playback layer when a disc is inserted. Eject the disc to make  
changes.  
The Set hybrid disc playback layer setting  
cannot be changed (it is grayed out).  
•A character that cannot be displayed on this unit is included in the file name. Use only alphanumeric  
characters if you want file names to be displayed correctly on this player.  
A ‘’ appears in the file name.  
This unit’s power may be turned on when you control this unit from a connected plasma television. If  
you do not want this unit to be turned on in this way, set this unit’s HDMI Control to Off (see HDMI  
Control on page 41).  
The power automatically turns on.  
52  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
09  
Interactive audio  
Glossary  
Interactive audio is Linear PCM (LPCM) audio activated by a BD-  
ROM application and mixed with the primary audio. It is typically  
used to provide dynamic sounds associated with interactive  
applications, such as button sounds.  
Analog audio  
An electrical signal that directly represents sound. Compare this to  
digital audio which can also be an electrical signal, but is an indirect  
representation of sound. See also Digital audio.  
Interlaced video  
A method of displaying a picture in which odd-numbered lines are  
updated in one pass, then even-numbered lines updated in the next.  
See also Progressive scan video.  
Aspect ratio  
The width of a TV screen relative to its height. Conventional TVs are  
4:3 (in other words, the screen is almost square); widescreen  
models are 16:9 (the screen is almost twice as wide as it is high).  
IP (Internet Protocol) address  
A unique number that devices use in order to identify and  
communicate with each other on a network utilizing the Internet  
Protocol standard, such as ‘192.168.0.1’. No duplicate numbers are  
allowed in the network.  
BD-J  
BD-J is the Java specification for BD-ROM, allowing content  
providers to put interactive material linked to specific titles on the  
disc.  
LAN cable  
Default Gateway  
A cable that has an 8-pin modular plug on each end and is different  
from a telephone plug which has 4 pins. A straight cable is used  
when connecting this player to a home network via a hub. A cross-  
over cable is used when connecting directly to a PC.  
Default Gateway is a node on a computer network that serves as an  
access point to another network. A default gateway (such as a  
computer and router) is used to forward all traffic that is not  
addressed to a station within the local subnet.  
MAC (Media Access Control) address  
An address attached to the port of any device. The MAC address  
cannot be changed.  
DHCP (Dynamic Host Configuration Protocol) Server  
A DHCP server is a server that allocates IP addresses to hosts  
(network devices). In most cases, a broadband router serves as a  
DHCP server in a home network.  
PCM (Pulse Code Modulation)  
A common system of encoding digital audio. Excellent quality, but  
requires a lot of data compared to formats such as Dolby Digital and  
MPEG audio. For compatibility with digital audio recorders and AV  
amplifiers with digital inputs, this unit can convert Dolby Digital,  
DTS and MPEG audio to PCM. See also Digital audio.  
Digital audio  
An indirect representation of sound by numbers. During recording,  
the sound is measured at discrete intervals by an analog-to-digital  
converter, generating a stream of numbers. On playback, a digital-  
to-analog converter generates an analog signal based on these  
numbers. See also Sampling frequency and Analog audio.  
Pop-up menu (BD only)  
A context-sensitive menu that can be used without interrupting  
playback of a BD.  
DRM (Digital Rights Management)  
DRM is one of several technologies that controls access to and use  
of digital data, such as music, movies and other copyrighted  
contents.  
Progressive scan video  
Also called non-interlaced video, this method of displaying a picture  
updates all the lines in one pass, resulting in a more stable, flicker-  
free image than interlaced video (for a given scanning rate). See also  
Interlaced video.  
Dynamic range  
The difference between the quietest and loudest sounds possible in  
an audio signal (without distorting or getting lost in noise). Dolby  
Digital and DTS soundtracks are capable of a very wide dynamic  
range, delivering dramatic cinema-like effects.  
Regions (DVD-Video and BD-ROM)  
These associate discs and players with particular areas of the world.  
This unit will only play discs that have a compatible region code (i.e.,  
the same code as your player). You can find the region code of your  
unit by looking on the rear panel. Some discs are compatible with  
more than one region (or all regions).  
Ethernet  
A frame-based computer networking technology for local area  
networks (LANs). This player supports 100BASE-TX and 10BASE-T.  
Note that the region systems for DVD and BD are not the same.  
File extension  
A tag added to the end of a filename to indicate the type of file. For  
example, “.jpg” indicates an JPEG image file.  
Sampling frequency  
The rate at which sound is measured to be turned into digital audio  
data. The higher the rate, the better the sound quality, but the more  
digital information is generated. For example, a sampling frequency  
of 44.1 kHz means 44 100 samples (measurements) per second. See  
also Digital audio.  
HDMI  
HDMI (High-Definition Multimedia Interface) is a high-speed digital  
interface which has the capability to support standard or high-  
definition video plus standard to multi-channel surround-sound  
audio on a single digital connection.  
Subnet mask  
The IP address is divided into the network address part and the host  
address part. The subnet mask is expressed as ‘255.255.255.0’. In  
most cases, the subnet mask is automatically assigned by the  
DHCP server.  
53  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
Additional information  
License  
[MPEG4IP]  
[OpenSSL]  
OpenSSL License  
Copyright © 1998-2004 The OpenSSL Project. All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or  
other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgment: “This product includes software developed  
by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”.  
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written  
permission. For written permission, please contact [email protected].  
5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the  
OpenSSL Project.  
6. Redistributions of any form whatsoever must retain the following acknowledgment: “This product includes software developed by the OpenSSL Project for  
use in the OpenSSL Toolkit (http://www.openssl.org/)”.  
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,  
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL  
PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES  
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE  
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
This product includes cryptographic software written by Eric Young ([email protected]). This product includes software written by Tim Hudson  
Original SSLeay License  
Copyright © 1995-1998 Eric Young ([email protected])  
All rights reserved.  
This package is an SSL implementation written by Eric Young ([email protected]). The implementation was written so as to conform with Netscapes SSL.  
This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found  
in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the  
same copyright terms except that the holder is Tim Hudson ([email protected]).  
Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should  
be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online  
or textual) provided with the package.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or  
other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software must display the following acknowledgement: “This product includes cryptographic  
software written by Eric Young ([email protected])”  
The word ‘cryptographic’ can be left out if the routines from the library being used are not cryptographic related:-).  
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: “This  
product includes software written by Tim Hudson ([email protected])”  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR  
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT  
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER  
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING  
IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and  
put under another distribution licence [including the GNU Public Licence.]  
[tiff]  
Copyright © 1988-1997 Sam Leffler  
Copyright © 1991-1997 Silicon Graphics, Inc.  
THE SOFTWARE IS PROVIDED “AS-IS” AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION,  
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE  
FOR ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF  
USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN  
CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.  
54  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
09  
[Howl]  
Copyright © 2003, 2004 Porchdog Software All rights reserved.  
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,  
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT  
SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE  
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
[UPNPLib/Intel Stack]  
[JPEG image compression]  
If only executable code is distributed, then the accompanying documentation must state that “this software is based in part on the work of the Independent  
JPEG Group”.  
[libpng]  
COPYRIGHT NOTICE, DISCLAIMER, and LICENSE:  
If you modify libpng you may insert additional notices immediately following this sentence. libpng version 1.2.6, December 3, 2004, is Copyright © 2004 Glenn  
Randers-Pehrson, and is distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing  
Authors  
Cosmin Truta  
libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright © 2000-2002 Glenn Randers-Pehrson, and are distributed according to the  
same disclaimer and license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors  
Simon-Pierre Cadieux  
Eric S. Raymond  
Gilles Vollant  
and with the following additions to the disclaimer:  
There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill  
any of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is  
with the user.  
libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright © 1998, 1999 Glenn Randers-Pehrson, and are distributed according to the  
same disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors:  
Tom Lane  
Glenn Randers-Pehrson  
Willem van Schaik  
libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright © 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license  
as libpng-0.88, with the following individuals added to the list of Contributing Authors:  
John Bowler  
Kevin Bracey  
Sam Bushell  
Magnus Holmgren  
Greg Roelofs  
Tom Tanner  
libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright © 1995, 1996 Guy Eric Schalnat, Group 42, Inc.  
For the purposes of this copyright and license, “Contributing Authors” is defined as the following set of individuals:  
Andreas Dilger  
Dave Martindale  
Guy Eric Schalnat  
Paul Schmidt  
Tim Wegner  
The PNG Reference Library is supplied “AS IS”. The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without  
limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect,  
incidental, special, exemplary, or consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such  
damage.  
Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following  
restrictions:  
1. The origin of this source code must not be misrepresented.  
2. Altered versions must be plainly marked as such and must not be misrepresented as being the original source.  
3. This Copyright notice may not be removed or altered from any source or altered source distribution.  
The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG  
file format in commercial products. If you use this source code in a product, acknowledgment is not required but would be appreciated.  
A “png_get_copyright” function is available, for convenient use in “about” boxes and the like: printf(“%s”,png_get_copyright(NULL)); Also, the PNG logo (in PNG  
format, of course) is supplied in the files “pngbar.png” and “pngbar.jpg (88x31)” and “pngnow.png” (98x31).  
Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative.  
Glenn Randers-Pehrson  
glennrp at users.sourceforge.net  
December 3, 2004  
[zlib]  
55  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
Additional information  
[FreeType]  
The FreeType Project is Copyright © 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below.  
THE FREETYPE PROJECT IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS  
BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.  
[GIFLIB]  
The GIFLIB distribution is Copyright © 1997 Eric S. Raymond  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES  
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS  
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR  
IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.  
[libhttp]  
Copyright © 2000-2004 Dag-Erling Smørgrav  
All rights reserved.  
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer in this position and unchanged.  
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or  
other materials provided with the distribution.  
3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.  
THIS SOFTWARE IS PROVIDED BY THE AUTHOR “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR  
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF  
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF  
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
The following copyright applies to the base64 code:  
Copyright 1997 Massachusetts Institute of Technology  
Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that both the  
above copyright notice and this permission notice appear in all copies, that both the above copyright notice and this permission notice appear in all supporting  
documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior  
permission. M.I.T. makes no representations about the suitability of this software for any purpose. It is provided “as is” without express or implied warranty.  
THIS SOFTWARE IS PROVIDED BY M.I.T. “AS IS”. M.I.T. DISCLAIMS ALL EXPRESS OR IMPLIED WARRANTIES WITH REGARD TO THIS SOFTWARE,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL  
M.I.T. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,  
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON  
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT  
OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
[Vera.ttf/VeraMono.ttf]  
Copyright © 2003 by Bitstream, Inc. All Rights Reserved. Bitstream Vera SansBitstreamVeraSans-RomanRelease 1.10 Copyright © 2003 by Bitstream, Inc. All  
Rights Reserved. Bitstream Vera is a trademark of Bitstream, Inc.  
[TinyLogin]  
This software is Copyright 1988 - 1994, Julianne Frances Haugh. All rights reserved.  
[Shadow Utilities]  
This software is Copyright 1988 - 1994, Julianne Frances Haugh. All rights reserved.  
Bigelow & Holmes Inc and URW++ GmbH Luxi font license  
[Luxi fonts]  
Luxi fonts Copyright © 2001 by Bigelow & Holmes Inc. Luxi font instruction code Copyright © 2001 by URW++ GmbH. All Rights Reserved. Luxi is a regis-tered  
trademark of Bigelow & Holmes Inc.  
THE FONT SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF COPYRIGHT, PATENT, TRADEMARK, OR  
OTHER RIGHT. IN NO EVENT SHALL BIGELOW & HOLMES INC. OR URW++GMBH. BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,  
INCLUDING ANY GEN-ERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR  
OTHERWISE, ARISING FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM OTHER DEALINGS IN THE FONT SOFT-WARE.  
56  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
09  
[GNU GENERAL PUBLIC LICENSE]  
Version 2, June 1991  
Copyright © 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.  
Preamble  
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to  
guarantee your freedom to share and change free software to make sure the software is free for all its users. This General Public License applies to most of  
the Free Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is  
covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too.  
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to  
distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the  
software or use pieces of it in new free programs; and that you know you can do these things.  
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate  
to certain responsibilities for you if you distribute copies of the software, or if you modify it.  
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make  
sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.  
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify  
the software.  
Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software  
is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others  
will not reflect on the original authors’ reputations.  
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain  
patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not  
licensed at all.  
The precise terms and conditions for copying, distribution and modification follow.  
GNU GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of  
this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the Program” means either the Program or  
any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or  
translated into another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is addressed as “you”.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is  
not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made  
by running the Program). Whether that is true depends on what the Program does.  
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and  
appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to  
the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.  
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such  
modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:  
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.  
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed  
as a whole at no charge to all third parties under the terms of this License.  
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most  
ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that  
you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License.  
(Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to  
print an announcement.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably  
considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as  
separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must  
be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who  
wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to  
control the distribution of derivative or collective works based on the Program.  
In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a  
storage or distribution medium does not bring the other work under the scope of this License.  
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2  
above provided that you also do one of the following:  
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above  
on a medium customarily used for software interchange; or,  
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source  
distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a  
medium customarily used for software interchange; or,  
57  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
Additional information  
c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for  
noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b  
above.)  
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means  
all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation  
of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source  
or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component  
itself accompanies the executable.  
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source  
code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object  
code.  
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify,  
sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or  
rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.  
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program  
or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work  
based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the  
Program or works based on it.  
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy,  
distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights  
granted herein.  
You are not responsible for enforcing compliance by third parties to this License.  
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed  
on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this  
License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a  
consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all  
those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from  
distribution of the Program.  
If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the  
section as a whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section  
has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have  
made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to  
the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder  
who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is  
permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.  
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar  
in spirit to the present version, but may differ in detail to address new problems or concerns.  
Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and “any later version”,  
you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the  
Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.  
10.If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission.  
For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our  
decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software  
generally.  
NO WARRANTY  
11.BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE  
LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT  
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD  
THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY  
MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS  
OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO  
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS  
58  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
09  
How to Apply These Terms to Your New Programs  
If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which  
everyone can redistribute and change under these terms.  
To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of  
warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.  
<one line to give the program’s name and a brief idea of what it does.>  
Copyright © <year> <name of author>  
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software  
Foundation; either version 2 of the License, or (at your option) any later version.  
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or  
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.  
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin  
Street, Fifth Floor, Boston, MA 02110-1301 USA.  
Also add information on how to contact you by electronic and paper mail.  
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:  
Gnomovision version 69, Copyright © year name of author  
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type ‘show w’. This is free software, and you are welcome to redistribute it under certain  
conditions; type ‘show c’ for details.  
The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate parts of the General Public License. Of course, the commands you use may  
be called something other than ‘show w’ and ‘show c’; they could even be mouse-clicks or menu items whatever suits your program.  
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the program, if necessary. Here is  
a sample; alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the program ‘Gnomovision’ (which makes passes at compilers) written by James Hacker.  
<signature of Ty Coon>, 1 April 1989  
Ty Coon, President of Vice  
This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider  
it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of  
this License.  
[GNU LESSER GENERAL PUBLIC LICENSE]  
Version 2.1, February 1999  
Copyright © 1991, 1999 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.  
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.]  
Preamble  
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to  
guarantee your freedom to share and change free software to make sure the software is free for all its users. This license, the Lesser General Public License,  
applies to some specially designated software packages typically libraries of the Free Software Foundation and other authors who decide to use it. You can  
use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular  
case, based on the explanations below.  
When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom  
to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the  
software and use pieces of it in new free programs; and that you are informed that you can do these things.  
To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions  
translate to certain responsibilities for you if you distribute copies of the library or if you modify it.  
For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure  
that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they  
can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We  
protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute  
and/or modify the library.  
To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed  
on, the recipients should know that what they have is not the original version, so that the original author’s reputation will not be affected by problems that might  
be introduced by others.  
Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users  
of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must  
be consistent with the full freedom of use specified in this license.  
Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License,  
applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit  
linking those libraries into non-free programs.  
When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative  
of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser  
General Public License permits more lax criteria for linking other code with the library.  
We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary General Public License. It also  
provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary  
General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances.  
For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard.  
To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free  
libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License.  
In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example,  
permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU  
Linux operating system.  
Although the Lesser General Public License is Less protective of the users’ freedom, it does ensure that the user of a program that is linked with the Library  
has the freedom and the wherewithal to run that program using a modified version of the Library.  
59  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
Additional information  
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a “work based on the library”  
and a “work that uses the library”. The former contains code derived from the library, whereas the latter must be combined with the library in order to run.  
GNU LESSER GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION  
0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party  
saying it may be distributed under the terms of this Lesser General Public License (also called “this License”). Each licensee is addressed as “you”.  
A “library” means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of  
those functions and data) to form executables.  
The “Library”, below, refers to any such software library or work which has been distributed under these terms. A “work based on the Library” means either  
the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications  
and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term “modification”.)  
“Source code” for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code  
for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library.  
Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using  
the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use  
of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.  
1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in any medium, provided that you conspicuously and  
appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to  
the absence of any warranty; and distribute a copy of this License along with the Library.  
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.  
2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications  
or work under the terms of Section 1 above, provided that you also meet all of these conditions:  
a) The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change.  
c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.  
d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an  
argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such  
function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute  
square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied  
function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.)  
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably  
considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as  
separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must  
be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who  
wrote it.  
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to  
control the distribution of derivative or collective works based on the Library.  
In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or  
distribution medium does not bring the other work under the scope of this License.  
3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter  
all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version  
than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other  
change in these notices.  
Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and  
derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library.  
4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and  
2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of  
Sections 1 and 2 above on a medium customarily used for software interchange.  
If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the  
same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object  
code.  
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a  
“work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.  
However, linking a “work that uses the Library” with the Library creates an executable that is a derivative of the Library (because it contains portions of the  
Library), rather than a “work that uses the library”. The executable is therefore covered by this License. Section 6 states terms for distribution of such  
executables.  
When a “work that uses the Library” uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the  
Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself  
a library. The threshold for this to be true is not precisely defined by law.  
If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less  
in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus  
portions of the Library will still fall under Section 6.)  
Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing  
that work also fall under Section 6, whether or not they are linked directly with the Library itself.  
6. As an exception to the Sections above, you may also combine or link a “work that uses the Library” with the Library to produce a work containing portions  
of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer’s own use and  
reverse engineering for debugging such modifications.  
You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You  
must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among  
them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things:  
a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work  
(which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable  
“work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable  
containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to  
recompile the application to use the modified definitions.)  
60  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
09  
b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already  
present on the user’s computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of  
the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with.  
c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge  
no more than the cost of performing this distribution.  
d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from  
the same place.  
e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.  
For an executable, the required form of the “work that uses the Library” must include any data and utility programs needed for reproducing the executable  
from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary  
form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself  
accompanies the executable.  
It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating  
system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.  
7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this  
License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is  
otherwise permitted, and provided that you do these two things:  
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed  
under the terms of the Sections above.  
b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying  
uncombined form of the same work.  
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy,  
modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have  
received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.  
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or  
its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work  
based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library  
or works based on it.  
10.Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy,  
distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of  
the rights granted herein. You are not responsible for enforcing compliance by third parties with this License.  
11.If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed  
on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this  
License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a  
consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those  
who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution  
of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to  
apply, and the section as a whole is intended to apply in other circumstances.  
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section  
has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have  
made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to  
the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.  
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.  
12.If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who  
places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted  
only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.  
13.The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be  
similar in spirit to the present version, but may differ in detail to address new problems or concerns.  
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and “any later version”,  
you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the  
Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.  
14.If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask  
for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions  
for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and  
reuse of software generally.  
NO WARRANTY  
15.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE  
LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT  
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE  
LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.  
16.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY  
MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,  
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS  
OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE  
WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS  
61  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
09  
Additional information  
How to Apply These Terms to Your New Libraries  
If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute  
and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).  
To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion  
of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.  
<one line to give the library’s name and a brief idea of what it does.>  
Copyright © <year> <name of author>  
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software  
Foundation; either version 2.1 of the License, or (at your option) any later version.  
This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS  
FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.  
You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin  
Street, Fifth Floor, Boston, MA 02110-1301 USA  
Also add information on how to contact you by electronic and paper mail.  
You should also get your employer (if you work as a programmer) or your school, if any, to sign a “copyright disclaimer” for the library, if necessary. Here is a  
sample; alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the library ‘Frob’ (a library for tweaking knobs) written by James Random Hacker.  
<signature of Ty Coon>, 1 April 1990  
Ty Coon, President of Vice  
That’s all there is to it!  
[Linux Source Notice]  
The software programs used on this product include the Linux operating system. The Linux contains software licensed for use based on the terms of a GNU  
General Public License. The machine readable copy of the corresponding source code is available for the cost of distribution.  
For more information or to obtain a copy, contact your local Pioneer Customer Service center.  
Details of the GNU General Public License can be found at the GNU website (http://www.gnu.org).  
62  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
09  
Specifications  
General  
Audio output (multi-channel/L, R, C, SW, LS, RS)  
Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . During audio output  
200 mVrms (1 kHz, –20 dB)  
Number of channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jack  
System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Blu-ray Disc PLAYER  
(BD-ROM, DVD-Video, DVD-R/-RW, CD, network file playback)  
Power requirements. . . . . . . . . . . . . . . . . AC 220 V to 240 V, 50 Hz/60 Hz  
Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 W  
Power consumption (standby) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 W  
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5kg  
Dimensions. . . . . . . . . . . . . . . .420 mm (W) x 103 mm (H) x 353 mm (D)  
Operating temperature . . . . . . . . . . . . . . . . . . . . . . . . . . +5 °C to +35 °C  
Operating humidity . . . . . . . . . . . . . . . . . 5 % to 85 % (no condensation)  
Audio characteristics  
Frequency response. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hz to 22 kHz  
S/N ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 dB  
Dynamic range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 dB  
Total harmonic distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.0015 %  
Wow and flutter . . . . . . . . . . . . . . . . . . . . . . . . . . . Limit of measurement  
(0.001 % W. PEAK) or lower  
HDMI output  
HDMI output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 pin  
Digital output  
Component Video output (Y, PB, PR  
)
Optical digital output . . . . . . . . . . . . . . . . . . . . . . . . . Optical digital jack  
Coaxial digital output. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jack  
Output level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Y: 1.0 Vp-p (75 Ω)  
PB, PR: 0.7 Vp-p (75 Ω)  
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jacks  
Other terminals  
LAN terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ethernet jack  
10BASE-T/100BASE-TX  
Control in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minijack (3.5 ø)  
IR in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Minijack (3.5 ø)  
S-Video output  
Y (luminance) - Output level . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p (75 Ω)  
C (colour) - Output level . . . . . . . . . . . . . . . . . . . . . . . . . 286 mVp-p (75 Ω)  
Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S-Video jack  
Accessories  
Video output  
Remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
AA/R6P dry cell batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Stereo audio cable (red/white plugs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Video cable (yellow plugs). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
HDMI cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
LAN cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Warranty card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Operating instructions  
Output level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p (75 Ω)  
Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jack  
Audio output (1 stereo pair)  
Output level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .During audio output  
200 mVrms (1 kHz, –20 dB)  
Number of channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jack  
The specifications and design of this product are subject to change without notice.  
63  
En  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Discover the benefits of registering your product online at http://www.pioneer.co.uk (or  
PIONEER CORPORATION  
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan  
PIONEER ELECTRONICS (USA) INC.  
P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404  
PIONEER ELECTRONICS OF CANADA, INC.  
300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411  
PIONEER EUROPE NV  
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11  
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.  
253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555  
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.  
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300  
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.  
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270  
K002_B_En  
Published by Pioneer Corporation.  
Copyright © 2007 Pioneer Corporation.  
All rights reserved.  
<07C000001>  
<VRB1465-A>  
Printed in Japan  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Music Mixer X Monitor User Manual
Philips Food Processor HR1396 User Manual
Philips TV Cables SWV7109W User Manual
Philips TV DVD Combo SA5245BT User Manual
Pioneer Car Video System XVHTD1 User Manual
Pioneer Network Card CD BTB100 User Manual
Planar Car Video System PLL1500M User Manual
Polycom IP Phone 1725 40120 001 User Manual
Poulan Snow Blower 414639 User Manual
Powermate Portable Generator PM011600001 User Manual