14V/18V SATELLITE
MULTI-SWITCH
TSMS-2150X-8AUV
Installation
And
Operation
Manual
OM2072N-1 REV. B
10/20/00
P/N: 911052
PICO MACOM, INC. 12500 Foothill Boulevard, Lakeview Terrace, CA 91342 • (818) 897-0028 • (800) 421-6511 • FAX (818) 834-7197
Download from Www.Somanuals.com. All Manuals Search And Download.
S A F E G U A R D S
Important Information
EXAMPLE OF ANTENNA GROUNDING ACCORDING TO
NATIONAL ELECTRICAL CODE INSTRUCTIONS CONTAINED
IN ARTICLE 810 - "RADIO AND TELEVISION
EQUIPMENT"
10. Grounding - This video product is equipped with a two
prong wall adapter. The shield of the power cord is ground.
11. Power Sources - This product should be operated only from
the type of power source indicated on the marking label. If you
are not sure of the type of power supplied to your home, consult
your appliance dealer or local power company.
POWER LINES
GROUND CLAMP
SERVICE ENTRANCE
CONDUCTORS
STANDOFF
INSULATORS
b
12. Power Cord Protection - Power supply cords should be
routed so they are not likely to be walked on or pinched by items
placeduponoragainstthem. Payparticularattentiontocordsand
plugs, convenience receptacles, and the point where they exit
from the appliance.
MAST
SERVICE
ENTRANCE
EQUIPMENT
ANTENNA
LEAD-IN WIRE
ANTENNA
DISCHARGE UNIT
c
GRO
UND CLAM
PS
TO EXTERNAL ANTENNA
13. Lightning - For added protection for this product during a
lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet.
TERMINALS OF PRODUCT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(e.g. interior metal water pipe)
GROUND WIRE
d
BONDING JUMPER
GROUND CLAMPS
OPTIONAL ANTENNA GROUNDING ELECTRODE
DRIVEN
8
FEET (2.44M) INTO THE EARTH
IF REQUIRED BY LOCAL CODES. SEE NEC
SECTION 810 - 21(f).
14. Power Lines - An outside antenna system should not be
locatedinthevicinityofoverheadpowerlines, otherelectriclight
or power circuits, where it can fall into such power lines or
circuits. Wheninstallinganoutsideantennasystem,extremecare
shouldbetakentokeepfromtouchingsuchpowerlinesorcircuits
as contact with them may be fatal.
original parts. Unauthorized substitutes may result in fire, electric
shock or other hazards.
20. Safety Check - Upon completion of any service or repairs to
this product, ask the service technician to perform safety checks to
determine that the product is in proper operating conditions.
15. Overloading - Do not overload wall outlets and extension
cords as this can result in risk of fire or electric shock.
21. Outdoor Antenna Grounding - Before attempting to install
this product, be sure the antenna or cable system is grounded so as
to provide some protection against voltage surges and built-up
static charges.
a. Use No.10 AWG (5.3mm ) copper, No.8 AWG (8.4mm
(aluminum, No.7 AWG (10mm ) copper-clad steel or bronze wire
or larger, as ground wire.
b. Secure antenna lead-in and ground wires to house with stand-
off insulators spaced from 4 feet (1.22m) to 6 feet (1.83m) apart.
c. Mountantennadischargeunitascloseaspossibletowherelead-
in enters house.
16. Object and Liquid Entry - Never push objects of any kind
into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
17. Servicing - Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service
personnel.
18. Damage Requiring Service - Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
product.
d. A driven rod may be used as the grounding electrode where
othertypesofelectrodesystemsdonotexist. RefertotheNational
Electrical Code, ANSI/NFPA 70-1984 for information.
e. UsejumperwirenotsmallerthanNo.6AWG(13.3mm)copper
or equivalent, when a separate antenna grounding electrode is
used.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operatinginstruction. Adjustonlythosecontrolsthatarecovered
bytheoperatinginstructions. Animproperadjustmentmayresult
in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been
damaged.
NOTE TO THE CATV SYSTEM
INSTALLER:
THIS REMINDER IS PROVIDED TO CALL THE CATV
SYSTEMINSTALLER’SATTENTIONTOARTICLE820
- 22 OF THE NEC THAT PROVIDES GUIDELINES FOR
PROPERGROUNDINGAND, INPARTICULAR, SPECI-
FIES THAT THE CABLE GROUND SHALL BE CON-
NECTED TO THE GROUNDING SYSTEM OF THE
BUILDING, AS CLOSE TO THE POINT OF CABLE
ENTRY AS PRACTICAL.
f. When the product exhibits a distinct change in performance -
this indicates a need for service.
19. Replacement Parts - When replacement parts are required,
be sure the service technician has used replacement parts speci-
fied by the manufacturer or have the same characteristics as the
2
PICO MACOM, INC. 12500 Foothill Boulevard, Lakeview Terrace, CA 91342 • (818) 897-0028 • (800) 421-6511 • FAX (818) 834-7197
Download from Www.Somanuals.com. All Manuals Search And Download.
DESCRIPTION
and Specifications
TSMS-2150X-8AUV
14V/18V Satellite Multi-Switch
TSMS-2150X-8AUV MULTI SWITCH
Features
• Provides RHCP and LHC switching for 8
receivers
• Combines TV input with satellite
input
• Input selected by 14V/18V from satellite
receiver employing right and left hand
circular polarization
• Power adapter supplies power to LNB's
• Ideal for smaller systems
Description
The TSMS-2150X-8AUV is a 14V/18V satel-
sixteenreceivers. TheTSMS-2150X-8AUVroutes
of
lite multi-switch used in all applications that any of the inputs to any of the outputs by utilizing the
require satellite I.F. distribution from 950 - 14V/18V switching control from the satellite receiv-
2150 MHz. It will allow the user to take two ers. The TSMS-2150X-8AUV provides an excellent
LNBoutputsandprovideinputs toamaximum way to simplify any SMATV installation.
Specifications
LNB Output Frequency:
Isolation:
RHCP to LHCP
Output to Output -14 dB typical
Switching Voltage:
13/14 Vdc
17/18 Vdc
950-2150MHz
-25 dB typical
Insertion Loss:
950 -1750 MHz -6 dB minimum
1750 - 2050 MHz -10 dB typical
40-860 MHz -4 dB typical
RHCP
LHCP
Power - Wall Adaptor: 117 Vac, 60Hz
Connectors:
Dimensions:
"F" type
19"L x 2.87"D x 1.75"H
3
(Specifications subject to change without notice)
PICO MACOM, INC. 12500 Foothill Boulevard, Lakeview Terrace, CA 91342 • (818) 897-0028 • (800) 421-6511 • FAX (818) 834-7197
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Hook-up
TSMS-2150X-8AUV MULTI SWITCH
UHF/VHF ANTENNA
DSS DISH
AND LNB
24VDC
600mA
LNB RHCP
(13/148V)
ANT
IN
LNB LHCP
(17/18V)
OUT
1
OUT
2
OUT
3
OUT
4
OUT
5
OUT
6
OUT
7
OUT
8
TSDM ANT/SAT
DIPLEXER
ANT./SA
T
.
ANT./SA
T
.
ANT./SA
T
.
ANT./SA
T
.
ANT./SA
T
.
ANT./SA
T
.
ANT./SA
T
.
ANT./SAT.
D
C
P
S
S
D
C
P
S
S
D
C
P
S
S
D
C
P
S
S
D
C
P
S
S
D
C
P
S
S
D
C
P
S
S
D
C
P
S
S
A
A
A
A
A
A
A
A
•
™
•
™
•
™
•
™
•
™
•
™
•
™
•
™
TSDM
-
2150
TSDM
-
2150
TSDM
-
2150
TSDM
-
2150
TSDM
-
2150
TSDM
-
2150
TSDM
-
2150
TSDM 2150
-
40 2150 MHz
-
40 2150 MHz
-
40 2150 MHz
-
40 2150 MHz
-
40 2150 MHz
-
40 2150 MHz
-
40 2150 MHz
-
40 2150 MHz
-
ANT.
SAT
.
ANT.
SAT
.
ANT.
SAT
.
ANT.
SAT
.
ANT.
SAT
.
ANT.
SAT
.
ANT.
SAT
.
ANT.
SAT.
TV
TV
TV
TV
TV
TV
TV
TV
SAT
RECEIVER
SAT
RECEIVER
SAT
RECEIVER
SAT
RECEIVER
SAT
RECEIVER
SAT
RECEIVER
SAT
RECEIVER
SAT
RECEIVER
1. Connect the RHCP LNB output and the LHCP LNB output to the RHCP(13/14V) and LHCP(17/18V)
inputs respectively of the TSMS-2150X-8AUV.
3. Connect the broadband antenna to the ANT IN on the back of the unit.
4. Connect each of the output ports on the back of the unit to a TSDM antenna/satellite
diplexer. Connect the TSDM output port to the appropriate input, tv and/or receiver If a broadband
antenna is not used then omit the TSDM diplexer and connect the receivers directly to the
TSMS-2150X-8AUV output ports
5. Plug the wall adaptor 3.5mm plug into the jack located in the back of the unit. Plug the adaptor into a
120Vac, 60Hz wall receptacle.
6. Each of the satellite receivers can select programs in either right or left hand circular polarities.
To select a right hand circular polarity, a 13/14 DC voltage is used and to select a left
hand circular polarity, a 17/18 DC voltage is used.
4
PICO MACOM, INC. 12500 Foothill Boulevard, Lakeview Terrace, CA 91342 • (818) 897-0028 • (800) 421-6511 • FAX (818) 834-7197
Download from Www.Somanuals.com. All Manuals Search And Download.
W A R R A N T Y
FIVE YEAR LIMITED WARRANTY
ico Macom, Inc. Be prepared to provide:
warrants to the 1. The model number and channel
original purchaser
number of the product
thisproductshall be 2. The date of purchase
free of defects in 3. A specific identification of the
material and crafts- problem
P
manship with only the limitations or Deliver the products to Pico Macom,
exclusions set out below. Inc. or ship the products in the original
During the warranty period Pico packing material at the address at the
Macom, Inc. or an authorized Pico bottom of the page. Include satisfac-
Macomservicefacilitywillprovide, tory evidence of the date of purchase.
free of charge, the parts and labor
Products will not be accepted by
necessary to correct defects in mate- PicoMacom,Inc.withouttheRAnum-
rial and workmanship.
ber clearly indicated on the shipping
label.
Warranty Duration
The foregoing constitutes the Pico
Thiswarrantyshallterminatefive Macom, Inc. entire obligation with re-
years from the original date of pur- spect to this product and the original
chase of the product or at a time the purchaser and any user or owner shall
product is:
have no other remedy and no claim
for incidental or consequential dam-
ages. Some states do not allow limita-
tions on how long an implied war-
ranty lasts or do not allow the exclu-
sions or limitation of incidental or
consequential damages, so the above
limitation and exclusion may or may
not apply to you.
1. Misused or damaged due to
neglect or improper installation
2. Modified
3. Repaired by someone other
than the warrantor
4. Sold by the original purchaser
Statement of Remedy
To obtain such a warranty serv-
This warranty gives you specific
ice, contact the salesperson where legal rights, and you also have rights
the product was obtained. You will which vary from state to state.
beissuedaReturnAuthorization(RA)
number which will be used to track
your product.
PICO MACOM, INC. 12500 Foothill Boulevard, Lakeview Terrace, CA 91342 • (818) 897-0028 • (800) 421-6511 • FAX (818) 834-7197
Download from Www.Somanuals.com. All Manuals Search And Download.
PICO MACOM, INC. 12500 Foothill Boulevard, Lakeview Terrace, CA 91342 • (818) 897-0028 • (800) 421-6511 • FAX (818) 834-7197
Download from Www.Somanuals.com. All Manuals Search And Download.
|