Philips Work Light E3 Series User Manual

E3 Series Emergency Lighting E3  
Page 1 of 2  
6 or 12 Volt 14 to 50 Watts Thermoplastic Housing  
The E3 Series provides egress lighting in a wide variety of wattages. The thermoplastic housing and high performance electronics make the units ideal for commer-  
Front View  
Side  
View  
5.0”  
(12.7 cm)  
6.5”  
(16.5 cm)  
13.0”  
(33.0 cm)  
Complete Fixture consists of unit and two lamp heads. Select options and accessories below. For additional lamp heads, see RH Specification Sheet.  
How to Specify:  
E3  
W
SERIES  
BATTERY  
BATTERY/  
DC WATTAGE  
# OF  
HEADS  
LAMP  
HEADS  
HOUSING  
COLOR  
6V, Lead Cadmium  
E3 = Thermoplastic  
Emergency Lighting  
Unit  
1 = 6V  
2 = 12V  
1 = One  
2 = Two  
3 = Three  
Blank = No Heads  
6V  
W = White  
2
18L = 18W  
25L = 25W  
36L = 36W  
50L = 50W  
S6 = 5.4W  
S7 = 7.2W  
S9 = 9W  
12V  
S9 = 9W  
S12 = 12.5W  
S18 = 18W  
2
2
2
6V, Nickel Cadmium  
14N = 14W  
18N = 18W  
25N = 25W  
50N = 50W  
12V, Lead Calcium  
2
36L = 36W  
50L = 50W  
NOTES:  
2
1) Not available for use with SD, SA and SDTD options.  
2) Selected models are available with damp location option.  
12V, Nickel Cadmium  
25N = 25W  
50N = 50W  
Features  
Options (continued)  
1. Illumination: Allows up to three mounted lamp heads. The standard lamp  
head incorporates a high performance parabolic reflector with a wedge base  
tungsten lamp. Allows maximum spacing between units along a path of  
egress.  
F1 = 120 VAC Fuse  
F2 = 277 VAC Fuse  
P1 = 120 VAC Power Switch  
P2 = 277 VAC Power Switch  
DC = DC Power Switch  
ST = Special Input Transformer (specify voltage and frequency)  
HI = Lamp Heads Installed at Factory  
2. Housing: Constructed of impact resistant, UL 94 V-0, 5VA white thermo-  
plastic. Universal J-box mounting pattern, key hole slots or shelf mounting.  
3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-  
state circuitry. Charging system is complete with low voltage disconnect, AC  
lockout, brownout protection, AC indicator lamp and test switch.  
4. Battery: Maintenance free, sealed lead calcium battery has an estimated  
service life of 5 years, and an operating temperature range of 65°F (19°C) to  
85°F (30°C). Maintenance free, sealed nickel cadmium battery has an esti-  
mated service life of 10 years, and an operating temperature range of 20°F  
(-7°C) to 95°F (35°C).  
Multiple option configurations may void UL listing. Consult factory for specifics.  
Accessories  
WG5 = Wire Guard  
PCS1 = Polycarbonate Vandal Shield  
MSSHELFW = White Mounting Shelf  
5. Input Power Requirements: 120 VAC - 0.18 amps (20 watts);  
0.08 amps (20 watts)  
Job Information  
Type:  
Job Name:  
Cat. No.:  
Code Compliance  
UL 924 listed, CUL listing for 30 minute operation.  
Options  
Lamp(s):  
Notes:  
SD = Self-Diagnostics  
SA = Self-Diagnostics with Alarm  
SDTD = Self-Diagnostics with Time Delay  
V = Voltmeter (not available with Ammeter (A) option)  
1
1
A = Ammeter (not available with Voltmeter (V) option)  
T1 = 120 VAC Time Delay (15 minutes)  
T2 = 277 VAC Time Delay (15 minutes)  
LCK1 = Line Cord (6’, 120 VAC field installed)  
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710  
We reserve the right to change details of design, materials and finish.  
2
DL = UL Damp Location Listing  
Lightolier is a Philips group brand  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco TV Mount C986M A User Manual
Pelco TV Mount WM3026 User Manual
Philips Car Stereo System MCM204 User Manual
Philips Clock 170P5 User Manual
Philips Digital Photo Frame SPF4308 05 User Manual
Philips Network Router SL300I User Manual
Philips Stereo System 6050D User Manual
Presto Gas Grill 07046 User Manual
ProForm Home Gym C800 User Manual
PVI Industries Water Heater Polymer Lined Storage Tank User Manual