Table of contents
Important notes for operation . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4
The most important functions of your new video recorder . . . . . . .Page 5
Important information for customers in Great Britain . . . . . . . . . . Page 6
Preparing the remote control for operation . . . . . . . . . . . . . . . . . Page 7
Connecting to a TV set with a scart socket . . . . . . . . . . . . . . . . . . Page 7
Connecting to a TV set without a scart socket . . . . . . . . . . . . . . . Page 8
Connecting additional devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9
Setting channel, date and time for the first time . . . . . . . . . . . . . Page 10
Searching for a TV channel manually . . . . . . . . . . . . . . . . . . . . . . . Page 11
Allocating decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 12
Using a satellite receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 13
Searching for a TV channel automatically . . . . . . . . . . . . . . . . . . . Page 14
Sorting and clearing of TV channels manually . . . . . . . . . . . . . . . . Page 15
Changing the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 16
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 17
Navigation in the main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 17
Playing cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 18
Playing back NTSC cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 18
Selecting tape position display type . . . . . . . . . . . . . . . . . . . . . . . Page 19
Reset / display tape position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 20
Searching for tape position with picture (picture search) . . . . . . . Page 20
Searching for tape position without picture (forward wind and rewind) . . Page 20
Searching automatically for tape position (index search) . . . . . . . Page 21
Finding a blank position on tape automatically . . . . . . . . . . . . . . . Page 21
Still picture / slow motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 22
Optimizing tracking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 23
Optimizing still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 23
Starting and stopping of recording manually . . . . . . . . . . . . . . . . Page 24
Starting recording manually and stopping automatically . . . . . . . . . Page 25
Lining up manual recordings . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26
Selecting the recording speed . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 26
Recording automatically from a satellite receiver . . . . . . . . . . . . . .Page 27
Programming timer withVIDEO Plus+ . . . . . . . . . . . . . . . . . . . . . Page 28
Problem solving (VIDEO Plus-Programming) . . . . . . . . . . . . . . . . Page 30
Programming timer withoutVIDEO Plus+ . . . . . . . . . . . . . . . . . . Page 31
Problem solving (Timer programming) . . . . . . . . . . . . . . . . . . . . . Page 33
“Turbo Timer”-Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 34
Problem solving (Turbo Timer programming) . . . . . . . . . . . . . . . . .Page 35
Delete / check / change programmed recordings . . . . . . . . . . . . . Page 36
Adjusting automatic switch-off . . . . . . . . . . . . . . . . . . . . . . . . . . Page 37
Adjusting the child lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 37
Replaying cassette continuously . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 38
Changing the TV system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 39
Adjusting the OSD information . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 40
Selecting the sound channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 40
Energy-saving mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 41
Optimizing the modulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 42
Switching the modulator on and off . . . . . . . . . . . . . . . . . . . . . . . Page 43
Problem solving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 44
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 44
Introduction
1
2
3
4
5
6
7
8
9
Connecting the
video recorder
Initial
installation
Settings
Operating
instructions
Playback
Removing picture
interference
Manual
recording
Programmed
recordings
Other
10 functions
Suppressing
11
interference
Before you call
12 an engineer
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
You will find explanations
for the controls and the
displays on your video
recorder on the second to
last page of these
operating instructions.
TV
ä Call up additional functions (see below)
ä Switch set on / off
ä Interrupt function
ä Interrupt programmed recording
ä Additional TV function only (see below)
ä Activate / deactivate child lock
ä Change between TV reception and video
recorder reception
STANDBY/ON m
MUTE y
TIP
CHILD LOCK u
MONITOR
EJECT J
ä Eject inserted cassette
0-9
ä Enter data
ä Select programme number
ä Programme recordings
ä Check / change recordings
ä Delete recordings
TIMER k
TURBO TIMER
ä Programme Turbo Timer recordings
MENU
OK
ä Switch main menu on / off
ä Store
ä Confirm
ä Select function
SELECT
CLEAR / CL
ä Delete entry
ä Delete programmed recording
ä Select next / previous menu point
ä Select next / previous programme number
ä Select input field
ä In STOP or STANDBY mode: Rewind
ä In playback mode: Fast reverse
ä Play back recorded cassette
ä In STOP or STANDBY mode:Wind forward
ä In playback mode: Fast forward
ä Stop tape
; P+ / = P-
S+ P / QS-
H
PLAY G
I
STOP h
RECORD n
INDEX E
ä Start manual recording
H I
ä With or : Search for index
marking
STILL R
ä Stop tape and show still picture
Additional TV functions
ä Reduce TV volume
ä Increase TV volume
ä Select nextTV programme number
ä Select previousTV programme number
ä Switch sound on / off
Accessories
TV / QS-
TV / S+ P
TV / ;P+
4
Operating instructions
Quick Start Guide
Remote control
Batteries
Aerial cable
Mains cable
4
4
4
4
4
TV / =P-
TV / MUTE y
TV / STANDBY/ON m
ä Switch TV on / off
REMOTE CONTROL
ENGLISH
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
Welcome to the family of owners of Philips VHS video
recorders.
Thank you for choosing to buy our product. Please wait at
least three hours after transporting the appliance before
starting installation. The set needs this time in order to
become acclimatised to its new environment (temperature, air
humidity, etc.).
Your Philips Team hopes that you
will enjoy using your new video
recorder.
This product complies with the requirements of Directive 73/23/EEC + 89/336/EEC + 93/68 EEC.
Important notes for operation
You should not under any circumstances open the set yourself.
You would expose yourself to the risk of an electric shock from
the hazardous high voltage inside.
When the appliance is connected to the power supply, there are some
components which are constantly operational.To switch off the video
recorder completely, you must disconnect it from the power supply.
The video recorder does not contain any components that can be
repaired by the customer.
Make sure that air can circulate freely through the ventilation slots on
the video recorder.
Make sure that no objects or liquids enter the video recorder. If liquid is
spilt into it, disconnect the video recorder immediately from the power
supply and call the After Sales Service for advice.
The video recorder should not be used immediately after
transportation from a cold to a hot area or vice versa, or
in conditions of extreme humidity.
!
These operating instructions have been printed on non-polluting paper.
Please deposit old batteries at the relevant collection points.
Please make use of the facilities available in your country for disposing
of the video recorder packaging in a way that helps to protect the
environment.
This electronic device contains many materials which can be recycled.
Please enquire about the possibilities for recycling your old set.
IMPORTANT NOTES FOR OPERATION
ENGLISH
4
Download from Www.Somanuals.com. All Manuals Search And Download.
The most important functions of your video recorder
Your Philips video recorder can be used, not only for recording and playing back VHS
cassettes, but it also has a whole range of special functions which will make day-to-day
use of your new video recorder easier for you.
Plug in and off you go - getting started with your new video recorder just couldn’t be simpler. Once you
have connected the cables, you will immediately see text on the screen which will assist you at all stages
of operation.
Philips has developed a system which makes it possible for you to get the best possible playback quality
from video cassettes. Interference on old, often-played tapes is minimized, and in new or high quality
cassettes, details are even clearer.
The precision mechanism developed by Philips guarantees short rewind times and, by automatically
detecting the length of the tape, makes operation as easy as possible for the user.
The simple programming system for video recorders revolutionized the video world when it was
introduced. Instead of having to enter many different details (date, starting time, finish time, programme),
which was often tiresome and liable to errors, all you have to do is enter a number, up to nine digits long,
which can be found in any TV programme listing. Once you have done that, all the relevant details for the
recording are stored.
VIDEO Plus+ and PlusCode are registered trademarks of the Gemstar Development Corporation.
The VIDEO Plus+ system is manufactured under licence from the Gemstar Development Corporation.
So that you can identify your machine in the event of theft, enter the serial number (PROD. NO)
here.You will find it on the type plate on the back of the set.
MODEL NO.
PROD. NO.
VR 510/07
..............................
If you have any problems using the video recorder, please read the corresponding
chapters in this instruction manual. If you have any questions, there is also a customer
support service available in your country. You can find the telephone number in the
guarantee information enclosed in the packaging. Please have your model number
(MODEL NO.) and production number (PROD. NO.) ready.
ENGLISH
THE MOST IMPORTANT FUNCTIONS
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Important information for customers in Great Britain
This set is fitted with an approved moulded 13 amp plug.To change the fuse in this plug or to
attach a different plug, please proceed as follows:
1 Take off the fuse cover and remove the old fuse
2 Insert a new fuse. Suitable fuses are those of the type BS 1362 3A,A.S.T.A.
standard or BSI standard
3 Close the fuse cover
If the attached plug does not meet your requirements, you can cut it off and replace it with a
suitable plug. Please observe the following conditions:
If your new plug uses a built-in fuse, this should be a 3A fuse.
If your new plug does not contain a built-in fuse,please do not use any fuses in your fusebox with a rating
of more than 5A.
Please destroy the old, cut-off plug so that it cannot be used elsewhere.
4 Connect the blue cable (neutral “N”) to the terminal in the plug which is
marked with the letter “N” or coloured black
5 Connect the brown cable (live,“L”) to the terminal in the plug which is marked
with the letter “L” or coloured red
6 Do not in any circumstances connect either of the two cables to the terminal
in the plug which is marked with the letter“E”, the symbol “ \” or coloured
green or green / yellow
Before you refit the plug cover, make sure, that the grip at the bottom of the plug is clamped
over the plastic cover of the lead, not just over the two wires.
!
IMPORTANT INFORMATION FOR CUSTOMERS IN GREAT BRITAIN
ENGLISH
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Connecting the video recorder
Preparing the remote control for operation
1 Take the remote control of the video recorder
and the enclosed batteries (2 batteries)
2 Open the battery compartment, insert the
batteries as shown and then close the battery
compartment.The remote control is now ready
to use
Connecting to a TV set with a scart socket
1 Have the following cables ready:An aerial cable
Aerial cable
(enclosed), a mains cable (enclosed) and a scart
cable
Mains cable
What is a scart cable?
The scart or Euro-AV cable serves as the universal
recording and playback connector for picture-, sound-
and control signals.With this type of connection, there
is practically no loss of quality during the signal transfer.
We recommend that you use a scart cable (available
from specialist stores) when using this video recorder.
Scart cable
PARDON?
2 Switch off your TV set
3 Remove the aerial cable plug from the back of
your TV set and insert it into the aerial
2
socket
on the back of the video recorder
4 Take the enclosed aerial cable and connect
the appropriate ends to the aerial socket of
3
your TV set and to the TV socket
back of the video recorder
on the
ENGLISH
REMOTE CONTROL
Download from Www.Somanuals.com. All Manuals Search And Download.
/
CONNECTION WITH A SCART SOCKET
7
5 Take a scart cable and connect one end to the
scart socket on the back of your TV set and
AV1 EXT1
the other to the scart socket
the back of the video recorder
on
V1 EXT1
A
8 My TV set has more than one scart socket
4
Then you have a more modern TV set. Please
check first (with the aid of the operating
instructions for theTV set), which of the available
scart sockets is intended for use with the video PROBLEM
recorder.
6 Take the enclosed mains cable and connect
4
the appropriate end to the mains socket
on the back of the video recorder and the
other to the nearest free socket
7 Your set should automatically switch over to
the programme number allocated to video
recorder operation (usually:EXT,0 orAV).You
will see the welcome screen.
CONGRATULATIONS
YOU NOW OWN A NEW
PHILIPS
VIDEO RECORDER
8 My screen is still blank
4 If a TV set receives a signal via the scart socket, it
usually switches automatically to the
corresponding programme number. This
automatic function might be adversely affected.
Please switch manually to the corresponding
programme number (usually: EXT, 0 or AV)
4 Check the cable connections
CONTINUEPOK
PROBLEM
8 You can find more details in the chapter
“Initial Installation”
Connecting to a TV set without a scart socket
Aerial cable
1 Have the following cables (provided with your
new video recorder) ready: An aerial cable
and a mains cable
Mains cable
2 Switch off your TV set
CONNECTING TO A TV SET WITHOUT SCART SOCKET
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
8
3 Remove the aerial cable plug from the back of
yourTV set and insert it into the aerial socket
2
on the back of the video recorder
4 Take the enclosed aerial cable and connect
the appropriate end to the aerial socket of
3
your TV set and to the TV socket
back of the video recorder
on the
5 Take the enclosed mains cable and connect
4
the appropriate ends to the mains socket
on the back of the video recorder and the
other to the nearest free socket
6 Switch on your TV set and select on your TV
set the programme number which will in
future be used for operation with the video
recorder
7 On your TV change the settings of this
programme number until you see the
adjacent welcome screen clearly and in
colour on the screen
CONGRATULATIONS
YOU NOW OWN A NEW
PHILIPS
VIDEO RECORDER
8 There is no test image
4 Your video recorder “broadcasts” on the
frequency 583MHz (CH35) in the UHF range (ultra
highfrequency). Repeat the matching of the
selected programme numbers on the TV set.
CONTINUEPOK
4 Check the cable connections
PROBLEM
8
Switch off the video recorder with the
m.
standby button
Connecting additional devices
Additional devices, such as a decoder, camcorder, satellite receiver, etc., can be
AV2 EXT2
connected to the scart socket
on the back of the video recorder.
You will need a scart cable for this (available from specialist stores).
AV2 EXT2
AUDIO OUT
There are two audio output sockets on the back of the video recorder -
AUDIO OUT L R
.You can connect a stereo system to these.
ENGLISH
CONNECTING ADDITIONAL DEVICES
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Initial installation
Setting channel, date and time for the first time
OK
1 Using the
button activate the automatic
initial installation
“Aim” correctly
Always point the remote control at the video recorder
and not at the TV set.
TIP
AUTO INSTALL
2 The set seeks out and stores all available TV
channels as well as time and date. This
procedure may take several minutes.As soon
as all the data has been stored, the screen will
show the message “STORED”.
SEARCHING
00 TV CHANNELS FOUND
hhhh_______________
PLEASE WAIT...
The Teletext clock resets automatically
If a TV channel which has Teletext is stored as
programme number P01, the video recorder
automatically takes in the date and time from the text
function.The change from summer to winter time and
vice versa should also occur automatically.
TIP
3 The initial setting of channel, date and time is
completed
8 The time is not shown in the display of the video
recorder (“--:--”) or is shown incorrectly
4 While initial installation was going on, the set was
unable to recognise the time. Please read the
paragraph in Section 4 “Changing the time and
date” to correct this problem
PROBLEM
SETTING CHANNEL, DATE AND TIME
ENGLISH
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for a TV channel manually
In exceptional cases, it may happen that on initial installation the
set does not find all the available TV channels. In this case, the
missing TV channels must be searched for and stored manually.
1 Switch on the TV set and - if necessary -
select the programme number set for video
recorder operation
MENU
2 Press the
button on the remote
control.The on-screen menu appears
=P-
;P+
3 Use
or
to select the option
MAIN MENU
CLOCK
“MANUAL SEARCH”
AUTO INSTALL
MANUAL SEARCH
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
OK
4 Confirm with
5 Use S+P or QS- to select the
programme number (e.g.:“P 01”), which you
want to manually allocate to a TV channel
SPECIAL SETTINGS
OK
6 If you are looking for a special channel, use
=P-
;P+
or
to select the option “S-
MANUAL SEARCH
S+ P QS-
CHANNEL” and use
or
to
PROGRAMMENUMBER QP01P
S-CHANNEL
CHANNEL NUMBER
DECODER
activate the “YES” setting. To search for a
“normal” channel, the “NO” setting must be
selected
NO.
21
OFF
AUTO
ON
TV SYSTEM
NICAM
EXITPMENU
STOREPOK
What is a channel, or a special channel?
TV channels are transmitted on precisely-defined
frequency ranges.These ranges are also referred to as
“channels”. Each channel has its own TV station
allocated to it. Most cable and satellite TV providers
supply tables of channel allocations. Special channels
(hyperband channels) are transmitted on special
frequencies.
PARDON?
=P-
;P+
7 Use
or
to select the option
S+ P
“CHANNEL NUMBER” and use or
to enter the number of the TV-
QS-
Channel required
ENGLISH
SEARCHING FOR A TV CHANNEL MANUALLY
11
Download from Www.Somanuals.com. All Manuals Search And Download.
8 I don’t know the channels for my TV stations
4
P
No problem. Hold down the button
to start
the automatic channel search. A changing channel
number will appear on screen. Continue the
automatic channel search until you have found the
desired TV station
PROBLEM
OK
8 Press
to store the TV channel found.The
screen will briefly show “STORED”
8 I cannot find the TV channels from my satellite
receiver
4 These do not have to be stored as actual TV
channels.On your video recorder, select programm
number “E2”. Individual TV channels must be
selected on the actual satellite receiver itself
PROBLEM
9 Finish manual sorting of TV channels by
MENU
pressing the
button or return to step
3 to allocate additional TV channels
Allocating decoder
=P- ;P+
and
0-9
to
1 Use
or the number keys
select the TV channel, which will in future be
automatically decoded by your decoder
What is a decoder?
Like a deciphering machine, a decoder (available in TV
and video stores) deciphers theTV channels for which
additional charges must be paid. Without the
appropriate decoder, you will receive these TV
channels distorted.
PARDON?
MENU
2 Press the
button
ALLOCATING DECODER
ENGLISH
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3 The on-screen menu appears. Use the buttons
=P-
;P+
and
to select the menu point
OK
“MANUAL SEARCH” and confirm with
What is an on-screen menu?
The on-screen menu takes the mystery out of using
your new video recorder. All settings and recording
steps can be done easily via the on-screen menu by
following the corresponding instructions on the
screen.
MAIN MENU
CLOCK
PARDON?
AUTO INSTALL
MANUAL SEARCH
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
=P-
;P+
4 Use
or
to select the option
“DECODER”
5
Using S+ P or QS- , activate the setting
“ON”. The display will show “DEC”. When
selecting “OFF” the decoder will not be
allocated
SPECIAL SETTINGS
OK
MANUAL SEARCH
OK
MENU
6 Confirm with
and leave the on-screen
menu with the
button.The screen will
PROGRAMMENUMBER QP01P
S-CHANNEL
CHANNEL NUMBER
DECODER
NO.
21
show the message “STORED”
OFF
AUTO
ON
TV SYSTEM
NICAM
Check decoder allocation at a glance
EXITPMENU
STOREPOK
There is no need to call up the on-screen menu to check
to whichTV channel on the video recorder a decoder is
allocated. Simply use =P- and ;P+ to select a TV channel.
If “DEC” appears in the display, a decoder is allocated to
this channel.
TIP
Using a satellite receiver
Those TV channels which are received via a satellite receiver
AV2 EXT2
connected (to the scart socket
),can be viewed on the
video recorder on programme number “E2”. On the remote
0
=P-
control press the number button and then the button
to
select this programme number. The TV channels of the satellite
receiver are selected not on the video recorder itself,but directly
on the satellite receiver.
ENGLISH
USING A SATELLITE RECEIVER
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Settings
Searching for a TV channel automatically
On initial installation, the video recorder performs an automatic
channel search. If the channel assignments of your cable or
satellite TV provider change or if you are reinstalling the video
recorder, e.g. after moving house, you can start this procedure
again.The video recorder finds all the available TV channels and
stores the new settings.
1 Switch on the TV set and - if necessary -
select the programme number set for video
recorder operation
MENU
2 Press the
button on the remote
control.The on-screen menu appears
=P-
;P+
3 Use
or
to select the option
MAIN MENU
“AUTO INSTALL” (automatic channel
CLOCK
OK
AUTO INSTALL
MANUAL SEARCH
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
search) and confirm with
Sequence of TV channels
SPECIAL SETTINGS
TV channels are stored in the following sequence: BBC1,
BBC2, ITV, CH 4, CH 5, others.
TIP
OK
4 The set seeks out and stores allavailable TV
channels. This procedure may take several
minutes. As soon as all the TV channels have
been stored, the screen will show the
message “STORED”.
8 The video recorder is not finding all the TV
channels
4 In exceptional cases, it may happen that the set
does not find all the available TV channels. In this
case, the missing TV channels must be searched
for and stored manually.You can look up how to
do this in the chapter “Initial installation”
(“Searching for TV channel manually”).
AUTO INSTALL
SEARCHING
00 TV CHANNELS FOUND
PROBLEM
hhhh_______________
PLEASE WAIT...
MENU
5 Finish with the button
SEARCHING FOR A TV CHANNEL AUTOMATICALLY
ENGLISH
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Sorting and clearing of TV channels manually
After you have performed the automatic channel
search you may not agree with the sequence in which
the individual TV channels have been allocated to the
programme positions of the video recorder.You can
use this function to individually sort the TV channels
found or to delete unwanted TV channels or those
with poor reception.
MAIN MENU
CLOCK
AUTO INSTALL
MANUAL SEARCH
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
1 Switch on theTV set and - if necessary - select
the programme number set for video recorder
operation
SPECIAL SETTINGS
OK
MENU
2 Press the
button on the remote
control.The on-screen menu appears
=P-
;P+
3 Use
or
to select the option
OK
“TV CHANNEL ALLOC.” and confirm with
4 Use S+ P or QS- to select the TV
channel, to be allocated a programme
position
TV CHANNEL ALLOC.
ALLOCATE ON
TV CHANNEL
QP01P
BBC1
Sorting:
SELECT
Press ,to allocate theTV
channel to the programme
position set P 01
5
Clearing:
Delete the TV channel set with
CLEAR (CL)
ALLOCATEPSELECT STOREPOK
6 Continue repeating the steps 4 and 5, to
allocate additionalTV channels (P 02, P 03,...)
or to delete additional TV channels and
OK
confirm with
7 Finish the manual sorting / clearing of TV
MENU
channels with the button
ENGLISH
SORTING AND CLEARING OF TV CHANNELS MANUALLY
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Changing the time and date
If the display shows an incorrect time or “--:--”, the time and date
must be reset manually.
MENU
1 Press the
button on the remote
control.The on-screen menu appears
=P- ;P+
or
2 Use
to select the option “CLOCK”
OK
MAIN MENU
CLOCK
and confirm with
AUTO INSTALL
MANUAL SEARCH
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
3 In the “YEAR” option – if the setting displayed
is incorrect - enter the number of the current
0-9
year using the number keys
SPECIAL SETTINGS
Enter the values correctly
OK
Numbers less than 10 must be entered with an
additional “0”.Therefore for “9” you must enter “09”.
TIP
=P- ;P+
or
4 Use
to select the option “MONTH”
and - if the setting displayed is incorrect -
enter the current month with the number
0-9
keys
=P- ;P+
or
5 Use
to select the option “DATE”
and - if the setting displayed is incorrect -
enter the current calendar date with the
0-9
number keys
CLOCK
YEAR
MONTH
DATE
TIME
Q2000P
01
=P- ;P+
6 Use
or
to select the option “TIME”
and - if the setting displayed is incorrect -
enter the current time with the number keys
0-9
01
20:00
EXITPMENU
STOREPOK
7
8
Check the settings displayed for year, month,
OK
date and time and store them by pressing
MENU
Leave the on-screen menu with the
button
The Teletext clock resets automatically
If you store a TV channel which has Teletext as
programme number P01, the video recorder
automatically takes in the date and time from the text
function.The change from summer to winter time and
vice versa should also occur automatically.
TIP
CHANGING THE TIME AND DATE
ENGLISH
16
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Operating instructions
General information
If the video recorder is in standby mode, it can be switched on either by pressing
Switching on
m
0-9
or by inserting
the standby button , by pressing one of the number buttons
a cassette.
If the video recorder is not used for several minutes, it switches itself off
automatically.This function can be deactivated (e.g. if you want to use the video
recorder as aTV receiver).You can find out more about this in the chapter“Other
functions” (“Adjusting automatic switch off”).
Automatic switch-off
Energy consumption
Saving energy
The video recorder should always be connected to the mains so as not to affect
programmed recordings and use of the TV set. Power consumption (in energy
saving mode) is less than 4W.
In standby mode, the display of the video recorder shows the current time.This
display can be deactivated manually, in order to reduce power consumption to a
minimum in standby mode.You can find the necessary steps in the section“Other
functions” (“Energy-saving mode”).
The video recorder and the remote control have the option of an “Emergency
exit”.You can use the standby button mto interrupt any step during use. But even
without an “emergency brake” your new video recorder is safe: there is no risk
whatsoever of damaging the set by performing user steps incorrectly.
Emergency exit
In the event of a
power cut
Channel data are stored for around 1 year, time and timer data remain in the
memory of the video recorder for around 3 hours.
Navigation in the main menu
You can check and / or change many functions and settings of your
video recorder via the main menu. The individual functions are
selected as follows via the on-screen menu of the video recorder
MENU
Call up:
Select:
MAIN MENU
P+
; or =
P-
CLOCK
AUTO INSTALL
MANUAL SEARCH
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
OK
Confirm:
Enter:
0-9
or S+ P and QS-
STANDBY/ON m
MENU
Interrupt:
Abandon:
SPECIAL SETTINGS
OK
ENGLISH
GENERAL INFORMATION / NAVIGATION
17
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Playback
Playing cassettes
1 Insert aVHS cassette in the cassette opening on
the front of the video recorder.The tape will be
caught and automatically placed in the correct
v
position.The display will show “ ”
What does VHS mean?
The “Video Home System” (VHS) has become the
world-wide standard for recording and playback of
amateur video cassettes.The popular standard has since
been refined. Super-VHS (S-VHS) offers greater
sharpness and less noise, Digital-VHS (D-VHS) now only
works with digital picture and sound signals.Your video
recorder can only record and play standard VHS
cassettes.
P01
v
PARDON?
C
2 Press the Playback button
to play the tape
8 Picture / sound quality is poor
4 Please read the section “Removing picture
interference” in this chapter.
4 When playing many rental videos or older, poorer
quality cassettes, it may not be possible to
completely filter out picture and sound
interference. There is nothing wrong with the PROBLEM
video recorder.
3 Press the Stop button h on the remote
control (or the Stop/Eject cassette button
? on the front of the video recorder) to
stop the playback
4 Press the Stop/Eject cassette button ?on
the front of the video recorder,to remove the
tape
Automatic switch-off
Many functions (pause, still picture, search, ...) switch
themselves off automatically after a short time in order
to protect the cassette and to save energy.
TIP
?
Playing back NTSC cassettes
If you are using a PAL TV set which is capable of showing a frame
frequency of 60 Hz, you can play cassettes which have been recorded
on the NTSC standard (USA, Japan, etc.). During an NTSC playback,
some special functions (e.g. still picture) are not possible. The display
will show “60HZ”
PLAYING CASSETTES / PLAYING BACK NTSC CASSETTES
ENGLISH
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting tape position display type
OK
If the
button is pressed during playback and recording, the
current tape position (hours : minutes : seconds) is shown in the
display.There are two different types of display available.
MENU
1 Press the
button on the remote
control.The on-screen menu appears
=P-
;P+
2 Use
or
to select the option
MAIN MENU
CLOCK
“SPECIAL SETTINGS”
and
confirm
OK
with
AUTO INSTALL
MANUAL SEARCH
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
=P-
;P+
3 Use
or
to select the option
“COUNTER”
SPECIAL SETTINGS
What types of display are available to me?
OK
“LINEAR”:
The display shows the number of
minutes of tape already played
(00:00:00- hours/minutes/seconds)
“TIME LEFT”:
The display shows the playing time
remaining until the end of the
cassette (00:00 - hours/ minutes)
PARDON?
S+ P
QS-
4 Use
or
to select the
OK
desired display type and confirm with
.The
screen will show the message “STORED”
SPECIAL SETTINGS
8 The counter stops running when unrecorded
OSD
ON
OFF
places are found (“Linear” display type)
CLOCK DISPLAY
4 This is normal, and is necessary for technical
COUNTER
QT.LEFTP
SAT RECORDING
REPEAT PLAY
OFF
OFF
reasons.
8 The display shows a negative playing time
4 This may happen, for example, when you insert an
incompletely-rewound cassette into the video
recorder and rewind it to the start of the tape.
Since the display is automatically reset to
“00:00:00” when you insert a cassette, the
actual start of the cassette for the set is less than
zero - thus in the negative range.The tape position
is displayed with a minus sign “-”.
OK
8 After inserting a cassette the video recorder
shows no remaining playing time
4
The set needs a little time to calculate the remaining
playing time.After a few seconds, the display should
change from “--:--” to the corresponding value PROBLEM
ENGLISH
SELECTING TAPE POSITION DISPLAY TYPE
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset / display tape position
OK
Call up:
Reset:
CLEAR (CL)
“LINEAR” display mode)
(only in the
Automatic reset
Whenever a cassette is inserted the display is
automatically reset to “00:00:00”.
TIP
Searching for tape position with picture
(Picture search)
1 During playback press H (rewind) or I
(forward)
2 Interrupt the search wherever you like with
the Playback button G
Reduced quality
During picture search the picture quality is affected.
The sound is switched off.
Different search speeds
If you press H or I twice, the tape speed will
increase. If you press it again the speed is reduced to
TIP
normal once more.
Searching for tape position without picture
(Forward wind / Rewind)
1 Stop the tape with the Stop button h
2
Press H (rewind) or I (forward)
3 Interrupt the search wherever you like with
the Playback button G
Switching between rewind / forward wind and
picture search (instant view)
When winding the tape backwards or forwards if you
hold down H (rewind) or I (forward wind), the
set will immediately switch without a break to picture
search (with picture). When you release the rewind
or forward wind button the rewind or forward wind
process (without picture) will continue
FOR
EXPERTS
DISPLAY / RESET / FIND TAPE POSITION
ENGLISH
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching automatically for tape position
(Index search)
1 Insert a tape recorded on this video recorder
or on another set with index marking
What is an index marking?
At the start of each new recording the video recorder
automatically places a magnetic marking - similar to a
bookmark - at the appropriate place on the tape.
These positions can be found again quickly and easily
PARDON?
later by pressing a button.
2 Press the Index button Eand then I (next
index marking) or H (previous index
marking)
3 The video recorder searches for the desired
index marking and automatically switches to
playback
8 The cassette is ejected
4 The video recorder was unable to find an index PROBLEM
marking on the tape inserted.
Finding a blank position on tape automatically
1 Press the Index button E and then the Stop
button h
2 The video recorder searches for the next
blank part - longer than one minute - of the
tape and automatically switches to pause
8 The cassette is ejected
4 The video recorder was unable to find any blank PROBLEM
space on the tape inserted
ENGLISH
SEARCH FOR TAPE POSITION / FIND BLANK PART OF TAPE
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Still picture / slow motion
1 To stop the picture, press the Still button R
during playback
2 Keep R pressed down to play back the
picture in slow motion or press R several
times in succession in order to move the
picture forward frame by frame
Play compact VHS cassettes
You can, of course, also use this video recorder to play
back compact VHS cassettes.To do this, you will need
the appropriate cassette adapter. Its dimensions match
those of a normal VHS cassette. The adapter is
recognised and treated by the set as aVHS cassette.
FOR
EXPERTS
STILL PICTURE / SLOW MOTION
ENGLISH
22
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Removing picture interference
Optimizing tracking
=P-
1 During playback, hold down the button
;P+
or
until the display shows “TRAC”
What is tracking?
Tracking is the name given to the process of
optimizing picture and sound playback. During this
process the speed of the tape is adjusted in such a way
that all kinds of interference are removed or (in the
case of oldVHS cassettes) minimized.
PARDON?
=P- ;P+
or
2 Hold down the button
until the
v TRAC
playback quality is at its best
3 Wait a few seconds until the message “TRAC”
disappears from the display
Tracking adjustment is retained
The adjustments made are stored until the cassette is
removed.After that, the standard tracking adjustment
is restored.
TIP
Optimizing still picture
1 When still picture is activated hold down the
=P- ;P+
button
or
until the optimal picture
quality is obtained. The display will show
“JITT”
8 I can’t get optimal quality
4 When using rental cassettes or older tapes, it may
not be possible to get rid of all interference
completely
PROBLEM
2 Wait a few seconds until the message “JITT”
disappears from the display
v JITT
The setting is retained
The adjustments made are stored until the cassette is
removed. Then the still picture standard setting is
restored.
TIP
ENGLISH
OPTIMIZING TRACKING / STILL PICTURE
Download from Www.Somanuals.com. All Manuals Search And Download.
23
8
Manual recording
Starting and stopping of recording manually
1 Switch on theTV set and - if necessary - select
the programme number set for video recorder
operation
2 Insert a cassette without erase protection
What is erase protection?
VHS cassettes can be protected from over-recording by
breaking off a thin strip of plastic (arrow). This erase
protection can be overridden by sticking one or more
strips of adhesive tape tightly over the gap which has
been created.
PARDON?
=P- ;P+
or
3 Use the buttons
to select the
programme number, under which your video
recorder has stored the desiredTV channel
8 I can’t find the TV channels from my satellite
receiver
8 I want to record from an additional device
4 Signals from additional devices - such as a
camcorder, other video recorder, PCs, etc. - are
received via the scart socket of the video recorder.
The programme numbers “E1” and “E2” are PROBLEM
allocated for these sources.
Selecting the recording speed
You have the option of two playback and recording
speeds: Standard Play (SP) offers the usual first-class
picture quality. By using Long Play (LP), you can (with
somewhat reduced picture quality) for example record
about 360 minutes of programmes on a 180 minute
cassette.This chapter explains how to set the desired
recording speed (“Selecting the recording speed”).
FOR
EXPERTS
4 Start recording by pressing the Record
button n (remote control or on front of
set).The display will show “
”.
Displaying tape position
OK
With the
button you can display the current tape
position (see chapter “Playback”)
TIP
n
P01
v
5 End the recording by pressing the Stop
button h
STARTING / STOPPING RECORDING MANUALLY
ENGLISH
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting recording manually /
stopping automatically
1 Insert a cassette without erase protection
What is erase protection?
VHS cassettes can be protected from over-recording by
breaking off a thin strip of plastic (arrow). This erase
protection can be overridden by sticking one or more
strips of adhesive tape tightly over the gap which has
been created.
PARDON?
=P-
;P+
2 Use the buttons
or
to select the
programme number, under which your video
recorder has stored the desiredTV channel
8 I can’t find the TV channels from my satellite
receiver
8 I want to record from an additional device
4 Signals from additional devices - such as a
camcorder, other video recorder, PCs, etc. - are
received via the scart socket of the video recorder.
The programme numbers “E1” and “E2” are
allocated for these sources.
PROBLEM
Selecting the recording speed
You have the option of two playback and recording
speeds: Standard Play (SP) offers the usual first-class
picture quality. By using Long Play (LP), you can (with
somewhat reduced picture quality) for example record
about 360 minutes of programmes on a 180 minute
cassette.This chapter explains how to set the desired
recording speed (“Selecting the recording speed” ).
FOR
EXPERTS
3 Press the Record button n several times.The
time faded in corresponds to the duration of
recording to be selected. Each time the Record
button is pressed again this is increased in
regular steps (30 minutes). Stop the adjustment
when you have reached the desired duration.
Recording will start.
Delete entry
The recording period displayed can be reset to
00:00:00 with the CLEAR (CL) button.
TIP
ENGLISH
STARTING RECORDING MANUALLY / STOPPING AUTOMATICALLY
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Lining up manual recordings
When you add a further recording to a cassette, which
already has a recording on it, a short blank (flicker) usually
appears between the old and the new recording.This is how
to avoid such an effect.
1 Look at the last minute of the old recording
(playback)
2 Press the Stop button hat the point where you
want the new recording to start (the display will
show 9)
3 Press the Record button nin the usual way to
start the new recording
Selecting the recording speed
MAIN MENU
CLOCK
MENU
1 Press the
button on the remote
AUTO INSTALL
MANUAL SEARCH
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
control.The on-screen menu appears
=P-
;P+
2 Use
or
to select the option
SPECIAL SETTINGS
OK
“RECORD SPEED” and confirm with
OK
PS+ QS-
3 Use
or
to select the desired
recording speed (“SP” - Standard Play or “LP”
- Long Play or “AUTO” - Auto Long Play)
Standard Play / Long Play / Auto Long Play
Standard Play (SP) offers the usual, first-class picture
quality. By using Long Play (LP), you can (with somewhat
reduced picture quality) for example record about 360
minutes of programmes on a 180 minute cassette.With
the Auto Long Play (AUTO) setting, the video recorder
calculates, before starting the recording, how much
playing time remains on the cassette inserted.
Depending on the calculated remaining playing time and
the duration of the programmed recording, the
recording will be made in Standard Play or Long Play.
PARDON?
OK
4 Confirm with
.The screen will show the
message “STORED”
MENU
5 Stop selection of recording speed with
LINING UP RECORDINGS / RECORDING SPEED
ENGLISH
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording automatically from a satellite receiver
You can only use this function if you have a satellite
receiver which can control other devices via a scart
cable
What is a scart cable?
The scart or Euro-AV cable serves as the universal
recording and playback connector for picture-, sound-
and control signals.With this type of connection,there
is practically no loss of quality during transfer. We
recommend that you use a scart cable when using this
PARDON?
video recorder.
1 Insert a cassette without erase protection
MAIN MENU
CLOCK
2 Check that the satellite receiver is connected
AUTO INSTALL
MANUAL SEARCH
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
EXT.2 AV 2
to the scart socket
the video recorder
on the back of
MENU
3 Press the
button on the remote
SPECIAL SETTINGS
control.The on-screen menu appears
OK
=P-
;P+
4 Use
or
to select the option
OK
“SPECIAL SETTINGS” and confirm with
=P-
;P+
5 Use
or
to select the option
“SAT RECORDING”
PS+ QS-
6 Use
or
to select the setting
“ON”, to activate automatic recording from a
SPECIAL SETTINGS
satellite receiver or “OFF” to deactivate it.
OK
Confirm with
. The screen will show the
OSD
ON
OFF
message “STORED”
CLOCK DISPLAY
COUNTER
QT.LEFTP
SAT RECORDING
REPEAT PLAY
OFF
OFF
7 Programme the data on the satellite receiver
for the desired recording. If necessary, you
should refer to the instructions for your
satellite receiver for assistance.
OK
SWITCH OFF THE VIDEO RECORDER WITH THE
8
STANDBY/ON BUTTON m ! IF YOU DON’T DO
THIS, THE SET WILL NOT RECORD.
When automatic recording has been activated
by a satellite receiver,“x” will light up in the
display
ENGLISH
RECORDING AUTOMATICALLY FROM A SATELLITE RECEIVER
Download from Www.Somanuals.com. All Manuals Search And Download.
27
9
Programmed recordings
Programming timer with VIDEO Plus+
TIMER
button
k
1
Press the
What is a Timer?
The timer controls the programmed recordings of your
video recorder. Requirements for a timer which works
correctly: The clock in the video recorder must be
correctly set or the reception of the TV signal must be
as free from interference as possible (for example, if
there is interference, the video recorder might not
correctly recognise theVPS signal of a TV channel).
VIDEO PLUS+
PLUSCODE NUMBER
543124--
REP.
ONCE
PARDON?
2
TheVIDEO Plus screen will appear
What is VIDEO Plus+?
REP.PSELECT
STOREPOK
TIMER LISTPTIMER
A programming system which replaces the often
tiresome entry of date, starting time, finish time and
programme number by the simple entry of a number
up to nine digits long (which can be found in any TV
programme listing).
PARDON?
0-9
3 Use the
keys to enter the PlusCode
programming number of the TV programme
selected: Incorrect entries can be cancelled
CLEAR (CL)
with the
button
Daily / weekly recordings
If you like, you can chosse with SELECT “ONCE” for
one-off recordings,“MO-FR” for recordings, which are
repeated daily (Mon-Fri) or “WEEK.”for recordings,
which are repeated each week on the same day.
FOR
EXPERTS
OK
Confirm with
4
8 I get the error message “SELECT PROG. NR.”
4 You have entered
correct PlusCode
a
programming number - but automatic recognition
of the correct TV channel has failed. Please enter
the programme number under which your video
recorder has stored the desiredTV channel, using
0-9,
OK
.
the buttons
and confirm with
PROBLEM
PROGRAMMING TIMER WITH VIDEO PLUS+
ENGLISH
28
Download from Www.Somanuals.com. All Manuals Search And Download.
5 The details of the previously entered
TIMER
VIDEO Plus recording are displayed. Use
PS+ QS-
or
to select the input fields
VPS
DATE REP. PROG. START PDC END
21 ONCE 01 20:00 * 21:30
and - if necessary - change their content
0-9
with
Activate VPS/PDC
VPS (Video Programming Service) and PDC signals
(Programme Delivery Control) are transmitted by TV
channels at the start and end of transmissions and
ensure that programmes will be completely recorded,
even if they are rescheduled.In the input box,“START”
REP.PSELECT STOREPOK
FOR
SELECT
use
to switch recognition of these signals on
EXPERTS
(*) or off ( ).
OK
6 Confirm with
.The screen will show the
message “STORED”
Selecting the recording speed
You have the option of two playback and recording
speeds: Standard Play (SP) offers the usual first-class
picture quality. By using Long Play (LP), you can (with
somewhat reduced picture quality) for example record
about 360 minutes of programmes on a 180 minute
cassette.This chapter explains how to set the desired
recording speed (“Selecting the recording speed” ).
FOR
EXPERTS
7 Insert a cassette without erase protection
What is erase protection?
VHS cassettes can be protected from over-recording by
breaking off a thin strip of plastic (arrow). This erase
protection can be overridden by sticking one or more
strips of adhesive tape tightly over the gap which has
been created.
PARDON?
SWITCH OFF THE VIDEO RECORDER WITH THE
8
STANDBY/ON BUTTON m ! IF YOU DON’T DO
THIS, THE SET WILL NOT RECORD.
The display will show “k”
YOU WILL FIND TIPS FOR SOLVING
PROBLEMS TO DO WITH VIDEO PLUS
RECORDING ON THE FOLLOWING PAGE.
PROBLEM
ENGLISH
PROGRAMMING TIMER WITH VIDEO PLUS+
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving (VIDEO Plus-Programming)
SOLUTION
PROBLEM
A correct PlusCode programming number has been entered - but automatic
recognition of the correct TV channel has failed. Please enter the programme
number under which your video recorder has stored the desiredTV channel using
Error message:
“SELECT PROG. NR.”
0-9
OK
.
the buttons
and confirm with
Error message:
“PLUSCODE NUMBER
NOT VALID”
The Pluscode programming number entered is incorrect or does not match the
STANDBY/ON
m
.
date entered. Please enter it again or finish with the
button
Error message:
“MO-FR PROGRAMMING NOT
POSSIBLE FOR WEEKEND”
The attribute “MO-FR” has been selected for a recording at the weekend.This is
only possible for recordings from Monday to Friday. Please enter it again or finish
with the STANDBY/ON button m.
A recording was programmed, but the video recorder was not switched into
Error message:
“SWITCH TO STANDBY -
TIMER RECORDING”
timer mode with the standby button m.Press STANDBY/ON min order to make
the programmed recording.Warning:if you do not do this, the video recorder will
not record.
Error message:
“NO CASSETTE”
A recording was programmed, but there is no cassette in the machine. Insert a
cassette ready for recording without erase protection.
All the available memory locations in your video recorder for timer and VIDEO
Plus programming are full. Delete a programmed recording (see chapter “Delete
a programmed recording”).
Error message:
“ALL TIMERS OCCUPIED”
A recording was programmed, but there is no cassette in the machine. Insert a
cassette ready for recording without erase protection.
“k” and/or “v” are
flashing in the display
of the video recorder
A recording was programmed, but the video recorder was not switched into
timer mode with the standby button m.Press STANDBY/ON min order to make
the programmed recording.Warning:if you do not do this, the video recorder will
not record.
Cassette is ejected
after programming
A cassette with erase protection was inserted. Please deactivate the erase
protection or insert another cassette which is ready for recording.
The end of the tape was reached during a programmed recording.The recording
could not be completed satisfactorily.
Cassette is ejected
during recording
Once started,a recording can only be interrupted by pressing the STANDBY/ON
The set cannot be
used during recording
m
button . WARNING: This will not only stop the recording,but it will also delete
the programmed recording from the memory of the video recorder.
Year / month / date / time
display appears
The time has not been set or not set correctly.After entering / confirming year,
month, date and time, you can continue programming.
PROBLEM SOLVING (VIDEO PLUS-PROGRAMMING)
ENGLISH
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming timer without VIDEO Plus+
2x
TIMER
k twice
1 Press the
button
2 The Timer screen will appear
=P- ;P+
3 If necessary use
or
to select a free
TIMER
memory location and confirm with
k.
TIMER
What is a memory location?
VPS
DATE REP. PROG. START PDC END
21 ONCE 01 20:00 * 21:30
For technical reasons, your video recorder has access
to a limited number of “drawers” in which you can
store your programming requirements. “Drawers”
occupied by programme recording details are only
available for use again after the video recorder has
successfully completed a programmed recording or if
it has been manually deleted.Your video recorder can
store up to six timer programmings.
REP.PSELECT STOREPOK
PARDON?
S+ P QS-
4 Use
or
to select the input
field “DATE” and enter the date of your
desired recording
Daily / weekly recordings
If you like, you can use SELECT “MO-FR” for
recordings which are repeated daily or “WEEK.”
(weekly) for recordings which are repeated each
week on the same day.
FOR
EXPERTS
S+ P QS-
or
5 Use
to select the input
field“PROG.” and enter the programme number
under which the video recorder has stored the
desiredTV channel
Enter the values correctly
Numbers less than 10 must be entered with an
additional “0”.Therefore for “9” you must enter “09”.
TIP
S+ P QS-
6 Use
or
to select the input
field “START” and enter the start time of the
desired recording
Activate VPS/PDC
VPS (Video Programming Service) and PDC signals
(Programme Delivery Control) are transmitted by TV
channels at the start and end of transmissions and
ensure that programmes will be completely recorded,
even if they are rescheduled. In the input field,
SELECT
signals on (*) or off ( ).
“START” use
to switch recognition of these
FOR
EXPERTS
ENGLISH
PROGRAMMING TIMER WITHOUT VIDEO PLUS
31
Download from Www.Somanuals.com. All Manuals Search And Download.
S+ P QS-
7 Use
or
to select the input
field “END.”and enter the end time of the
desired recording
8 Check that the date,programme number,start
and finish time are shown correctly on the
OK
screen. Confirm with the
button. The
screen will show the message “STORED”
Selecting the recording speed
You have the option of two playback and recording
speeds: Standard Play (SP) offers the usual first-class
picture quality. By using Long Play (LP), you can (with
somewhat reduced picture quality) for example record
about 360 minutes of programmes on a 180 minute
cassette.This chapter explains how to set the desired
recording speed (“Selecting the recording speed” ).
FOR
EXPERTS
9 Insert a cassette without erase protection
What is erase protection?
VHS cassettes can be protected from over-recording by
breaking off a thin strip of plastic (arrow). This erase
protection can be overridden by sticking one or more
strips of adhesive tape tightly over the gap which has
been created.
PARDON?
SWITCH OFF THE VIDEO RECORDER WITH THE
0
STANDBY/ON BUTTON m ! IF YOU DON’T DO
THIS, THE SET WILL NOT RECORD.
The display will show “k”
YOU WILL FIND TIPS FOR SOLVING
PROBLEMS TO DO WITH TIMER
RECORDING ON THE FOLLOWING PAGE.
PROBLEM
PROGRAMMING TIMER WITHOUT VIDEO PLUS
ENGLISH
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving (Timer programming)
SOLUTION
PROBLEM
Error message:
“NO CASSETTE”
A recording was programmed, but there is no cassette in the machine. Insert a
cassette ready for recording without erase protection.
Error message:
“SWITCH TO STANDBY -
TIMER RECORDING”
A recording was programmed, but the video recorder was not switched into
timer mode with the standby button. Press STANDBY/ON m in order to make the
programmed recording.Warning:if you do not do this,the video recorder will not
record.
A recording was programmed, but there is no cassette in the machine. Insert a
cassette ready for recording without erase protection.
“k” and/or “v” are
flashing in the display of
the video recorder
A recording was programmed, but the video recorder was not switched into
timer mode with the standby button. Press STANDBY/ON m in order to make the
programmed recording.Warning:if you do not do this,the video recorder will not
record.
All the available memory locations in your video recorder for timer and VIDEO
Plus programming are full. Delete a programmed recording (see chapter “Delete
/ check / change programmed recordings”).
Error message:
“ALL TIMERS OCCUPIED”
Cassette is ejected
during recording
The end of the tape was reached during a programmed recording.The recording
could not be completed satisfactorily.
Cassette is ejected
after programming
A cassette with erase protection was inserted. Please deactivate the erase
protection or insert another cassette which is ready for recording.
Once started, a recording can only be interrupted by pressing the STANDBY/ON
button m. WARNING: This will not only stop the recording,but it will also delete
the programmed recording from the memory of the video recorder.
The set cannot be
used during recording
Year/month/date/time
display appears
The time has not been set or not set correctly.After entering / confirming year,
month, date and time, you can continue programming.
Recording via external sources
If you want to watch or record transmissions from a
satellite receiver, films from a video camera (or from
other external devices), connect the device to the scart
EXT1 AV1
EXT2 AV2
and select the
socket
or
programme number on your video recorder “E1” or
“E2”.
FOR
EXPERTS
ENGLISH
PROBLEM SOLVING (TIMER PROGRAMMING)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
“Turbo Timer”-Recording
Using the “TurboTimer”, you can make a programmed
recording within the next 24 hours quickly and simply,
without having to switch on theTV set. All you need to
do now is enter or confirm the desired programme
number and start and finish time in the video recorder.
TURBO TIMER
remote control.
1 Press the
button on the
k
20:00
2 The display shows the actual starting time, e.g.:
“START 20:00”. Change – if necessary – the
=P- ;P+.
displayed start time with
or
Activate VPS/PDC
VPS (Video Programming Service) and PDC signals
(Programme Delivery Control) are transmitted by TV
channels at the start and end of transmissions and
ensure that programmes will be completely recorded,
even if they are rescheduled. Use SELECT to switch
recognition of these signals on (VPS / PDC appears in
the display) or off.
k
FOR
22:00
EXPERTS
TURBO TIMER
button
3
Confirm with the
4 The display shows a suggestion for the end of
the recording e.g.: “END 22:00” (Start time
+ 2 hours). Change – if necessary – the
=P- ;P+.
displayed start time with
TURBO TIMER
or
button
Confirm
with the
k
01
5 The display shows the programme number to
which the video recorder is currently set, e.g.:
“PROG. 01”. Change – if necessary – the
=P- ;P+.
displayed start time with
TURBO TIMER
or
Confirm
with the
button. The display
briefly shows “OK”.
“TURBO TIMER”-RECORDING
ENGLISH
34
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Insert a cassette without erase protection
k
OK
What is erase protection?
VHS cassettes can be protected from over-recording by
breaking off a thin strip of plastic (arrow). This erase
protection can be overridden by sticking one or more
strips of adhesive tape tightly over the gap which has
been created.
PARDON?
SWITCH OFF THE VIDEO RECORDER WITH THE
7
STANDBY/ON BUTTON m ! IF YOU DON’T DO
THIS, THE SET WILL NOT RECORD.
The display will show “k”
Problem solving (Turbo Timer programming)
SOLUTION
PROBLEM
Error message: “CASS”,
“k” will blink in the display
A recording was programmed, but there is no cassette in the machine. Insert a
cassette ready for recording without erase protection.
All the available memory locations in your video recorder for timer and
VIDEO Plus programming are full. Delete a programmed recording (see chapter
“Delete / check / change programmed recordings”).
Error message: “FULL”
Cassette is ejected
during recording
The end of the tape was reached during a programmed recording.The recording
could not be completed satisfactorily.
Cassette is ejected
after programming
A cassette with erase protection was inserted. Please deactivate the erase
protection or insert another cassette which is ready for recording.
STANDBY/ON
Once started,a recording can only be interrupted by pressing the
The set cannot be
used during recording
m
button .WARNING: This will not only stop the recording, but it will also delete
the programmed recording from the memory of the video recorder.
The time has not been set or not set correctly.A Turbo Timer recording is not
possible. Please enter the correct time (Section “Changing the time and date”)
Error message: “CLK”
ENGLISH
PROBLEM SOLVING
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Delete / check / change programmed recordings
2x
TIMER
twice
k
1 Press the
button
on the remote
control
=P- ;P+
or
2 Use the buttons
to select the
memory location in the display which you
want to check / change / delete
TIMER
VPS
DATE REP. PROG. START PDC END
21 ONCE 01 20:00 * 21:30
What is a memory location?
For technical reasons, your video recorder has access
to a limited number of “drawers” in which you can
store your programming requirements. “Drawers”
occupied by programme recording details are only
available for use again after the video recorder has
successfully completed a programmed recording or if
it has been manually deleted.
REP.PSELECT STOREPOK
PARDON?
Delete:
Check:
CLEAR (CL)
and finish
3
Press
OK
with the button
.
TIMER k
Press , check the
stored details and (once you
OK
have checked) end with
Change:
TIMER k
Press
buttons
and use the
to enter the new
0-9
OK
value(s). Confirm with
and
activate the timer again with the
m
Standby button .
DELETE / CHECK / CHANGE RECORDINGS
ENGLISH
36
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Other functions
Adjusting automatic switch-off
If the video recorder is not used for several minutes, it
switches itself off automatically. If you want to use the video
recorder as a TV receiver, you can deactivate the automatic
switch-off as follows:
MENU
1 Press the
button on the remote
MAIN MENU
CLOCK
control.The on-screen menu appears
AUTO INSTALL
MANUAL SEARCH
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
=P-
;P+
2 Use
or
to select the option
OK
“AUTO STANDBY” and confirm with
S+ P QS-
3 Use
or
to select the setting
SPECIAL SETTINGS
“OFF” (automatic switch-off deactivated) or
OK
“ON” (automatic switch-off activated) and
OK
confirm with
. The screen will show the
message “STORED”
4 Complete the adjustment of automatic switch-
MENU
off with the
button
Adjusting the child lock
You can prevent unauthorised use of your video recorder with
this function. Once it is activated, the buttons on the front of the
set are locked. Previously entered programmes will of course be
recorded
CHILD LOCK
1 Press the
u button for a few
seconds,until the display shows“u”.The child
lock is now activated. Switch off the video
m
recorder with the Standby button
on the
remote control. The set can now only be
switched on with the remote control. Put away
the remote control in a secure place
2 To deactivate the child lock, press the
CHILD LOCK
until “u” disappears
button u for a few seconds
ENGLISH
AUTOMATIC SWITCH-OFF / CHILD LOCK
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Replaying cassette continuously
This function can be used to play a tape over and over again. If
the end of the cassette or of the recording has been reached, the
video recorder automatically rewinds to the start of the tape and
starts to play back again.This function is activated or deactivated
as follows:
MENU
1 Press the
button on the remote
control.The on-screen menu appears
=P-
;P+
2 Use
or
to select the option
“SPECIAL SETTINGS”
and
confirm
OK
with
=P-
;P+
3 Use
or
to select the option
“REPEAT PLAY”
SPECIAL SETTINGS
OSD
ON
OFF
CLOCK DISPLAY
COUNTER
S+ P QS-
or
4 Use
to select the setting
QT.LEFTP
OFF
“ON” (continuous playback) or “OFF” (no
OK
SAT RECORDING
REPEAT PLAY
OFF
continuous playback) and confirm with
.
The screen will show the message “STORED”
OK
5 Complete the adjustment of continuous
MENU
playback with the
button
6 Insert a cassette without erase protection
What is erase protection?
VHS cassettes can be protected from over-recording by
breaking off a thin strip of plastic (arrow). This erase
protection can be overridden by sticking one or more
strips of adhesive tape tightly over the gap which has
been created.
PARDON?
C
7 Press the Playback button
to start the
playback or continuous playback (depending
on the setting)
REPLAYING CASSETTE CONTINUOUSLY
ENGLISH
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the TV system
When playing back cassettes which have been recorded
with signals from a different TV system there may be
interference with the colour. To deactivate the automatic
change to a different TV system, you must follow these
steps.
TV systems
Other countries, other TV systems: In central Europe
transmissions are broadcast in the PAL-System (Phase
Alternation Line) Standard, while in France SECAM
(Séquentiel à mémoire) is used. In some countries
(USA and Japan), TV viewers receive their
programmes as an NTSC signal (National Television
System Committee). Many TV and video sets can
MAIN MENU
CLOCK
AUTO INSTALL
MANUAL SEARCH
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
PARDON?
process and show several transmission systems.
MENU
1 During playback press the
button on
SPECIAL SETTINGS
the remote control. The on-screen menu
appears
OK
=P-
;P+
2 Use
or
to select the option
OK
“TV SYSTEM” and confirm with
S+ P
QS-
3 Use
or
to select the
desired TV system or “B/W” for black and
OK
white playback and confirm with
Reactivating automatic change-over
As soon as the cassette is ejected with the Stop/Eject
button ? the set switches automatically back to
the “AUTO” setting (automatic switching). To change
the setting during playback, perform the steps 1-3
again and select “AUTO”.
TIP
4 End the change-over to automatic TV system
MENU
changing with the
button
ENGLISH
CHANGING THE TV SYSTEM
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the OSD information
If this function is activated, the current operating
details of the video recorder will be briefly displayed
on the screen
What is an OSD?
The on-screen menu or OSD (“On Screen Display” takes
the mystery out of using your new video recorder. Using
the main menu (MENU button on your remote control),
all settings and recording steps can be done easily via the
on-screen menu by following the corresponding
MAIN MENU
CLOCK
AUTO INSTALL
MANUAL SEARCH
TV CHANNEL ALLOC.
RECORD SPEED
AUTO STANDBY
TV SYSTEM
PARDON?
instructions on the screen.
MENU
1 During playback press the
button on
the remote control. The on-screen menu
appears
SPECIAL SETTINGS
OK
=P-
;P+
2 Use
or
to select the option
“SPECIAL SETTINGS” and confirm with
SPECIAL SETTINGS
OK
OSD
ON
OFF
=P- ;P+
or
3 Use
4 Use
to select the option “OSD”
to select the setting
CLOCK DISPLAY
COUNTER
QT.LEFTP
SAT RECORDING
REPEAT PLAY
OFF
OFF
S+ P QS-
or
“ON” (OSD information on) or “OFF” (OSD
OK
information off) and confirm with
OK
What goes on behind the settings?
ON:
For each type of operation selected
(playback, recording, etc.) the corresponding
symbol appears briefly on the screen
TIP
OFF:
OSD information is not shown
5 Complete the adjustment of the OSD
MENU
information with the
button
Selecting the sound channel
During playback or while receiving a TV channel via the video
recorder, one or more sound channels can be selected. This
means, for example, if there are multilingual transmissions, you
can select the language you want.
SELECT
1 Press the
button on the remote
control.The current sound channel setting is
displayed
ADJUSTING OSD INFORMATION / SELECT SOUND CHANNEL
ENGLISH
40
Download from Www.Somanuals.com. All Manuals Search And Download.
What goes on behind the settings?
STEREO: Both left and right stereo sound tracks can
be heard
LEFT:
The left stereo sound track can be heard
RIGHT: The right stereo sound track can be heard
MONO:
MIX:
The mono sound track can be heard
The mono sound track as well as the left and
right stereo sound tracks can be heard
TIP
SELECT
2 Press the
button several times until
the desired setting can be seen on the screen
Automatic switch-over to mono
If no stereo signal is recorded on a video cassette, the
video recorder automatically switches over to the
“MONO” sound channel setting
Make dubbing audible
When dubbing video recordings, the mono track is
recorded with a new sound signal.The original stereo
signal is retained. To make dubbing audible, you must
select the “MIX” or “MONO” sound channel setting.
TIP
Energy-saving mode
To reduce the power consumption of the video
recorder you can switch the clock in the display of the
video recorder on or off as follows:
SPECIAL SETTINGS
MENU
button on the remote
control.The on-screen menu appears
1
Press the
OSD
ON
OFF
CLOCK DISPLAY
COUNTER
QT.LEFTP
OFF
=P- ;P+
or
2 Use
to select the option“SPECIAL
SAT RECORDING
REPEAT PLAY
OFF
OK
SETTINGS” and confirm with
OK
3 Use
=P- ;P+
or
to select the option “CLOCK
DISPLAY”
S+ P QS-
or
4 Use
to select the setting
OK
“ON” or“OFF” and confirm with
.The screen
will show the message “STORED”
5 Complete the adjustment of the clock display
MENU
with the
button
ENGLISH
ENERGY-SAVING MODE
41
Download from Www.Somanuals.com. All Manuals Search And Download.
11 Suppressing interference
Optimizing the modulator
If the TV set and the video recorder are only connected with an
aerial cable - rather than with an additional scart cable - it may
happen that in certain reception locations the modulator
frequency of the video recorder is occupied by a TV channel.
Result: As soon as the video recorder is switched on, the
reception quality of the TV picture deteriorates. The following
steps will show you how to overcome this problem.
What is a modulator?
The purpose of this electronic assembly inside your
video recorder is to pass on the picture and sound
information read in from the video tape via an aerial
cable like a TV signal to the TV set. The modulator
frequency determines the frequency range in which
these signals are transmitted.
TIP
1 Switch the video recorder on and make sure
there is no cassette in the video recorder
STOP
h
2 Press at the same time the
button
?
STOP/EJECT
on the remote control and the
J
button
on the front of the video recorder
until the modulator frequency of the set
appears in the display (e.g.: “M583” for 583
MHz)
M583
OPTIMIZE MODULATOR
3 The video recorder will now transmit a test
OPTIMIZE FREQUENCYQ583P
image on this frequency
MODULATOR
ON
=P-
;P+
4 Use
“OPTIMIZE FREQUENCY” and enter a new
0-9
or
to select the option
frequency with the number buttons
EXITPMENU
STOREPOK
Which modulator frequency should I enter?
You can also make the video recorder search
automatically for an appropriate frequency. To do so,
simply hold down the buttons S+ P .As soon as a
free frequency has been found, it will be shown in the PROBLEM
display.
5 Tune the programme number of your TV set
allocated for video use to the new modulator
frequency until you see the test image
sharply and in colour
OPTIMIZING THE MODULATOR
ENGLISH
42
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Confirm the new modulator frequency with
OK
. In the display there will briefly appear “OK”
MENU
7 Leave the on-screen menu with the
button
Switching off the modulator
If you have connected the video recorder to theTV set
with a scart cable, you can switch off the modulator
when there is interference with the picture or sound
(see below).
FOR
EXPERTS
Switching the modulator on and off
If picture and sound interference cannot be removed by optimizing the
modulator, the integral modulator can be switched off.Warning: this is
only possible if you have connected the video recorder to the TV set
with a scart cable. It is not possible to operate with the modulator
switched off without a scart cable.
1 Switch the video recorder on and make sure
there is no cassette in the video recorder
?
STOP
h
2 Press at the same time the
button
STOP/EJECT
on the remote control and the
J
button
on the front of the video recorder
M583
until the modulator frequency of the set
appears in the display (e.g.: “M583” for
583 MHz)
OPTIMIZE MODULATOR
OPTIMIZE FREQUENCYQ583P
MODULATOR
ON
3 The video recorder will now transmit a test
image on this frequency
=P-
;P+
4 Use
or
to select the option
“MODULATOR”
EXITPMENU
STOREPOK
S+ P QS-
5 Use
or
to select the setting
“ON” (Modulator on) or“OFF” (Modulator off)
OK
6 Confirm with
. In the display there will
briefly appear “OK”
MENU
7 Leave the on-screen menu with the
button
ENGLISH
SWITCHING THE MODULATOR ON AND OFF
Download from Www.Somanuals.com. All Manuals Search And Download.
43
12 Before you call an engineer
POSSIBLE CAUSE / SOLUTION
PROBLEM
Set no longer reacts when
4 Mains power has been interrupted / failed
4 A programmed recording is running. Interrupt with the standby button m
4 Child lock is activated: Switch this function off
4Technical interference: Remove the mains plug from the socket and reinsert it
buttons are pressed
4 Remove the mains plug from the socket, hold down the standby button mon the
The set is still not reacting,
front of the video recorder and reinsert the mains plug.When “--:--” or “E1”
appears in the display you can release m.Warning:All data memories of the set (TV
display shows e. g. „
“
E000
channel, time, timer) have been deleted.
Cassette is jammed in
video recorder
4 Do not use force! Briefly remove the mains plug and then reinsert it
4 Aim the end of the remote control at the display of the video recorder
4 Remove the batteries from the remote control and wait a few seconds before
replacing them
Remote control does not
work
4 Batteries weak or flat: Change the batteries
4 No recording on the cassette
No playback from video
recorder
4 Select theTV programme number allocated to video operation
4 Check that theTV channel number allocated to video operation is correct
4 Cable connection loose / missing: Check the connections
4 Check the TV to make sure that the programme number allocated to video
operation is correct
4 Cassette worn / faulty
Poor quality playback
from video recorder
4Tracking not correctly adjusted: Carry out the “Optimizing tracking” function
4TV channel not stored or wrongly selected
4 Cassette with erase protection inserted
No recording possible
4Wrong / incompletely programmed memory location
4Time / date not set correctly
4 Cassette with erase protection inserted
Programmed recording
not working
Picture and / or sound
interference in TV
reception
4 Optimize the modulator or switch it off (when using a scart cable)
4 Check the aerial cable connection
4The Department of Trade and Industry operates a specialist service to help TV licence
holders improve reception of BBC and ITC programmes and to prevent interference.
If your dealer cannot help, ask at a main Post Office for the booklet “How to improve
Television and Radio Reception”.
TV reception still not
perfect
TECHNICAL DATA
Dimensions in cm (W/H/D):
Energy consumption
38,0/9,3/26,0
16W
Energy consumption (Low Power Standby)
Mains voltage:
< 4W
198-264V / 50 Hz
Number of video heads:
4
Number of audio heads:
1 linear, 2 FM
Rewind / forward wind speed:
Recording / playback speed (E240 cassette):
approx. 100 seconds (E180 cassette)
SP (Standard Play) 4 hours, LP (Long Play) 8 hours
PROBLEM SOLVING / TECHNICAL DATA
ENGLISH
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
ENGLISH
NOTES
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
NOTES
ENGLISH
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Video recorder / display
1
2
3
4
5
6
7
1 STANDBY/ON m ä Switch set on / off
ä Interrupt function
ä Interrupt programmed recording
2 RECORD n
ä Record
3 PROGRAMME -
4 PROGRAMME +
5 MONITOR
ä Select previous programme no. / menu point
ä Select next programme no. / menu point
ä Toggle between TV and video recorder reception
6 STOP/EJECT ? ä 1x: Stop tape
ä 2x: Eject tape
7 H
ä In Stop or Standby mode: Rewind tape
ä During playback: Reverse picture search
I
ä In Stop or Standby mode: Forward wind tape
ä During playback: Forward picture search
PLAY K
ä Play back recorded cassette
Timer:
Enter
programme
Timer:
Enter date Enter start
time
Timer:
k
(No
function)
Recording
Timer:
Enter
programmed
Recording
in progress
finish time
Child lock
activated
VPS/PDC
signal
Long Play
detected
Current
operating
mode
Tape
position
in seconds
Automatic
satellite receiver
recording
Daily recording
selected
Cassette
inserted
Decoder
allocated
Weekly recording - Programme number
selected
- Tape position
- Function
activated
ENGLISH
VIDEO RECORDER / DISPLAY
47
Download from Www.Somanuals.com. All Manuals Search And Download.
3103 166 25231
0095/ω
VR 510/07
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
|
PDP Flat Panel Television 4360HD User Manual
Peavey Speaker ILS 1294 H User Manual
Pelco Marine Lighting L560 User Manual
Philips Flat Panel Television Q41G78308134A User Manual
Philips Power Supply SJM3123 User Manual
Philips TV VCR Combo CCC 133AT User Manual
Philips Ventilation Hood BDL4221V User Manual
Philips Washer HQ200 User Manual
Pioneer GPS Receiver AVIC Z110BT User Manual
Poulan Lawn Mower 160462 User Manual