CONTENTS
1. CONNECTING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . 4
Connecting the cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connecting a decoder or other equipment . . . . . . . . . . . . 4
Switching the On-screen display (OSD) on or off . . . . . 23
Continuous playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Switch off function (SLEEP TIMER) . . . . . . . . . . . . . . . . . 24
Switch on function (WAKE-UP TIMER) . . . . . . . . . . . . . . 24
2. INSTALLING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . . . 5
Initial installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 9. Before you call an engineer . . . . . . . . . . . . . . . . . . . . . . . 25
Allocating a decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Manual TV channel search . . . . . . . . . . . . . . . . . . . . . . . . . 6
Satellite receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Special installation functions . . . . . . . . . . . . . . . . . . . . . . . 7
Automatic TV channel search . . . . . . . . . . . . . . . . . . . . . . 7
Searching for new TV channels . . . . . . . . . . . . . . . . . . . . . 7
Allocating a channel number . . . . . . . . . . . . . . . . . . . . . . . 8
Delete a TV Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Technical terms used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3. IMPORTANT NOTES FOR OPERATION . . . . . . . . . . . . . . 11
SUMMARY OF USER GUIDE . . . . . . . . . . . . . . . . . . . . . . . 11
User guide (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. TV SET FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Selecting a TV programme . . . . . . . . . . . . . . . . . . . . . . . . 13
Automatic volume control (AVL) . . . . . . . . . . . . . . . . . . . . 13
How to read TELETEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
5. PLAYBACK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Playing a cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Tape position indication . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Searching for tape position with the picture (picture
search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Searching for tape position without the picture (wind
and rewind) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Instant View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Automatic search for a tape position (index search) . . 16
Picture interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Cleaning the video heads . . . . . . . . . . . . . . . . . . . . . . . . . 16
6. MANUAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Recording without automatic switch-off . . . . . . . . . . . . 17
Recording with automatic switch-off (OTR
one-touch-recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Protecting your recordings . . . . . . . . . . . . . . . . . . . . . . . . 17
Auto-assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
7. PROGRAMMED RECORDING (TIMER) . . . . . . . . . . . . . . . 19
’VPS’ (Video Programming System) and ’PDC’
(Programme Delivery Control) . . . . . . . . . . . . . . . . . . . . . 19
Programming a recording (with ’VIDEO Plus+’) . . . . . . . 19
Programming a recording (without ’VIDEO Plus+’) . . . . 20
Programming a recording with TELETEXT . . . . . . . . . . . 21
How to check or change a TIMER . . . . . . . . . . . . . . . . . . 22
8. ADDITIONAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 23
Parental control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING INSTRUCTIONS IN BRIEF
The remote control
STOP h Pause/Stop: To stop the tape, except while a TIMER-recording is being made
I
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward
scanning
TELETEXT e TELETEXT: To switch TELETEXT on or off
STANDBY m Switch off : To switch off set, interrupt menu
function, interrupt a programmed recording
(TIMER)
INDEX E Index search: In combination with
H
/
I
: to search for previous/next recording
on the cassette.
RECORD/OTR n Record: To record the programme selected
0-9 Number buttons: 0 - 9
STILL R Still picture: To stop the tape and show a still picture
CLEAR Delete : To delete last entry or clear
programmed recording (TIMER)
Coloured TELETEXT buttons:To select TELETEXT page directly
nred To select page/chapter shown in red at the bottom of the screen
ngreen To select page/chapter shown in green at the bottom of the screen
nyellow To select page/chapter shown in yellow at the bottom of the screen
nblue To select page/chapter shown in blue at the bottom of the screen
TIMER s TIMER: To make a manual TIMER
programming or to alter or clear a
programmed TIMER
MENU Menu: To call up or close the main menu
OK Store/Confirm: To store or confirm entry
P p Programme number: To select a programme
number up or down
AP q Select: One line up
BP r Select: One line down
DSr Select: Cursor left
SqC Select: Cursor right
_Sp Volume: To regulate the volume
y
Volume off: To switch the volume on or off
z
Previous programme number: To select the
previous programme number
PLAY G Playback : To play a recorded cassette
H
Rewind : During STOP and STANDBY: rewind,
during PLAYBACK: reverse scanning
Download from Www.Somanuals.com. All Manuals Search And Download.
Front of the set
Back of the set
2
Aerial input socket: To connect the aerial cable
EXT. 1 Scart socket: To connect a satellite receiver, decoder, video recorder, etc.
8
Power switch : To switch off the machine
Beware: If you switch off with the power switch, TIMER-recordings are not possible!
m
Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER)
P r/q Programme number : To select programme number up or down
Sr/q Volume: To regulate the volume
H
I
5
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward scanning
Record: To record the programme selected
G
Playback : To play a recorded cassette
?
Pause/Stop: To stop the tape, except while a TIMER-recording is being made
AUDIO Audio input socket left/right stereo
VIDEO Video input socket : To connect a camcorder or videogames
w
Headphones socket: To connect headphones
Download from Www.Somanuals.com. All Manuals Search And Download.
Special functions on your TV-VIDEO Combi
If a TV channel which transmits TXT/PDC is stored under programme number
’P01’, time and date will automatically be taken from the TXT/PDC information.
Crystal Clear video has become the synonym for outstanding picture quality
combining Philips’ very latest technologies: Natural Colour, Studio Tracking
System, Digital Studio Picture Control and laser-cut video heads.
Philips has developed a system which produces the best possible playback
quality. It reduces disturbance on old, worn video cassettes, and emphasises
the detail on very good quality cassettes.
When you have plugged your TV-VIDEO Combi into the mains, you will be
welcomed with an OSD picture. All you have to do is follow the instructions in
the "intelligent help line" for the next step. Enjoy the Automatic TV channel
search/save function and the automatic time adjustment.
Automatic Volume Leveller. This prevents a sudden increase of the volume, for
example, during commercials.
Simple programming system for TV-VIDEO Combis. Makes programming as easy
as making a telephone call. Simply enter the programme code which you will
find in your listings magazine.
The precision tape drive from Philips with a rewind time of 100 seconds (E180)
and automatic tape length recognition.
Your TV-VIDEO Combi has been equiped with two tuners. This enables you to
watch a programme while you are recording another programme.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1. CONNECTING YOUR TV-VIDEO COMBI
Important for the United Kingdom
Connecting the cables
This apparatus is fitted with an approved moulded 13 Amp
plug. To change a fuse in this type of plug proceed as follows:
a Remove fuse cover and fuse.
b Fix new fuse which should be a BS1362 5A, A.S.T.A. or
BSI approved type.
c Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of
5A. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 5A.
a Insert the aerial plug into the 2 socket.
DNote: * The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a 13A
socket elsewhere.
b Insert the plug of the mains cable into the wall socket.
c If the little red light at the front panel of the set is not lit,
please switch on the set. The power switch 8 is
located on the left side panel of the set.
How to connect a plug:
The wires in the mains lead are coloured in accordance with
the following code:
BLUE - ’NEUTRAL’ (’N’)
BROWN - ’LIVE’ (’L’)
Connecting a decoder or other equipment
d The BLUE wire must be connected to the terminal which
You can also connect additional equipment to the EXT. 1
socket. For instance, a satellite receiver, decoder or
camcorder.
is marked with the letter ’N’ or coloured BLACK.
e The BROWN wire must be connected to the terminal
which is marked with the letter ’L’ or coloured RED.
f Do not connect either wires to the earth terminal in the
plug which is marked with the letter ’E’ or by the safety
earth symbol \or coloured green or green-and-yellow.
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead - not imply over the
two wires.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2. INSTALLING YOUR TV-VIDEO COMBI
Initial installation
Allocating a decoder
a Open up the battery compartment of your remote control
Some TV stations will send coded TV channels, that you can
only watch when you use a decoder. You can connect such a
decoder (descrambler) to your TV-VIDEO Combi. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.
and place the batteries in it as shown in the picture.
a Select the TV channel for which you want to use the
decoder with the P p button on the TV-VIDEO Combi
or the number buttons 0-9 on the remote control.
b Press the MENU button on the remote control. The main
b Close the battery compartment.
menu will appear.
c If you have connected the aerial to the TV-VIDEO Combi,
press the OK button.
c Select the line ’Installation’ with the BP r or
AP q buton and confirm with the SqC button.
’Automatic TV channel search’ starts. This picture will
appear on the screen:
d Select the line ’Manual store’ with the BP r or
AP q button and confirm with the SqC button.
e Select the line ’Decoder’ with the BP r or
AP q button.
Searching...
CHANNELS FOUND:
MANUAL STORE
//////,,,,,,,,,,,,,,,,,,,,,
Channel/Frequency
FREQU.
Search
123
Fine tuning
Name edit
(,,,,=,,,,$
xxx
01
OFF
Programme number
Decoder
Wait until all TV channels have been found. This can take
several minutes.
When ’autoinstall’is ready, ’Installation comp.’
will briefly appear on the screen.
ã
«
Exit:
press MENU
DIf you have connected a decoder, you must install it
f Select function ’ON’ with the DSr or SqC
button. When you select ’OFF’, the function will be
switched off.
as described in the next section.
DIf you have connected a satellite receiver, please
read the section ’satellite receiver’.
g Confirm with the OK button.
h To end, press the MENU button.
Your decoder has now been allocated to this TV channel.
i Press the MENU button again.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the
function ’Manual store’.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
E To confirm the information, press the OK button.
Manual TV channel search
h If you want to change the automatic tv channel setting,
select the line ’Fine tuning’.
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
With the DSr or SqC button you can vary the
automatic tv channel setting. Important: This re-tuning is
only necessary and useful in special cases, e.g.: when
there are stripes on the picture with cable-TV systems.
a Press the MENU button on the remote control. The main
menu will appear.
i Press the OK button to store the TV channel.
b Select the line ’Installation’ with the BP r or
DIf you want to search for further TV channels, start
AP q button and confirm with the SqC button.
again at step e.
c Select the line ’Manual store’ with the BP r or
j To end, press the MENU button.
AP q button and confirm with the SqC button.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the
function ’Manual store’.
MANUAL STORE
Satellite receiver
Channel/Frequency
FREQU.
Search
123
Fine tuning
Name edit
(,,,,=,,,,$
xxx
01
OFF
Programme number
Decoder
You can receive channels from the satellite receiver via the
scart socket EXT. 1 .
To do this, select the channel number ’E1’ with the P p
button. You will have to select the channels to be received by
the satellite receiver on the receiver itself.
ã
«
Exit:
press MENU
d In the line ’Channel/Frequency’, select the
display for:
’FREQU.’: frequency
’C CH’: channel
’S CH’: special channel
e If you know the frequency or channel of the desired TV
channel, you can enter the data in line ’Search’ with
the digit buttons 0-9 .
DIf you don’t know the frequency or channel of the TV
channel of your choice, press the SqC button to
start the channel search.
f In the line ’Programme number’ select the
programme number you want e.g.: ’01’, using the
DSr or SqC button.
g If you want to change the TV channel name, press the
SqC button in line ’Name edit’.
E Select the character you want to change with the
DSr or the SqC button. Change the character
with the BP r or the AP q button. Select the next
character in the same way.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DAutomatic Channel Installation:
Special installation functions
Some cable companies or broadcasters offer the
possibility to install TV channels automatically with ’ACI’.
Information about the installation offered and how to
select it, will appear on the screen.
You can select one of the following installation functions in
order to adapt your TV-VIDEO Combi to your own specific
requirements.
This set will recognize and install TV channels with ’ACI’
automatically.
TV channels will be stored from programme number 1
onward.
Automatic TV channel search
If ’ACI’ cannot identify a TV channel, you can search for it
using the method as described in the section ’Manual TV
Channel Search’.
Your TV-VIDEO Combi will search for all TV channels.
If you want to start the automatic TV channel search again,
then follow the instructions below.
a Press the MENU button on the remote control. The main
Searching for new TV channels
menu will appear.
b Select the line ’Installation’ with the BP r or
a Press MENU . The main menu will appear.
AP q button and confirm with the SqC button.
b Select the line ’Installation’ with the BP r or
c Select the line ’Autoinstall’ with the BP r or
AP q button and confirm with the SqC button.
AP q button.
c Select the line ’Add new channels’ with the
BP r or AP q button and confirm with the
SqC button.
d Press the SqC button. The ’Automatic TV channel
search’ starts.
Channel search will start.
d To store the TV channel, press OK .
Searching...
CHANNELS FOUND:
e Repeat step d, until you have found all desired TV
channels.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you cannot select
the function ’Add new channels’.
//////,,,,,,,,,,,,,,,,,,,,,
e When the TV channel search is complete,
’Installation comp.’ will appear on the
screen.
How to search for a TV channel manually, you can read in the
section ’Manual TV channel search’.
DIf you have programmed a recording (TIMER), a wake-up
timer or a sleep-timer, you can’t select the function
’Autoinstall’.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Allocating a channel number
Delete a TV Channel
a Press the MENU button. The main menu will appear.
a Press the MENU button. The main menu appears.
b Select the line ’Installation’ with the BP r or
b Select the line ’Installation’ with the BP r or
AP q button and confirm with the SqC button.
AP q button and confirm with the SqC button .
c Select the line ’Sort channels’ with the BP r or c Select the line ’Sort channels’ with the BP r or
AP q button and confirm with the SqC button.
AP q button and confirm with the menu button
SqC .
SORT CHANNELS
SORT CHANNELS
01 zzz
02 yyy
03 xxx
04 aaa
05 bbb
06 ccc
01 zzz
02 yyy
03 xxx
04 aaa
05 bbb
06 ccc
ã
«
Exit:
press MENU
To move:
press OK
ã
«
Exit:
press MENU
To move:
press OK
d With the BP r , AP q , DSr or SqC button,
select the TV channel to which you want to allocate a
programme number and press the OK button.
d With the BP r , AP q , DSr or SqC button,
select the TV channel you want to delete and press the
CLEAR button.
e With the BP r , AP q , DSr or SqC button,
shift the TV channel to the programme number you wish
to allocate to this TV channel and press the OK button.
e Repeat step d, until you have deleted all the required
TV channels.
f Repeat steps dto euntil you have allocated a
f To end, press the MENU button.
programme number to all the required TV channels.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the
function ’Sort channels’.
g To end, press the MENU button.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the
function ’Sort channels’.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the language
Setting the time and date
You can select the language for the on-screen display (OSD).
a Press the MENU button on the remote control. The main
menu will appear.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’Installation’ with the buttons
BP r or AP q and confirm with the button
SqC .
c Select the line ’Set clock’ with the BP r or
MAIN MENU
AP q button and confirm with the SqC button.
Picture
Sound
Setup
Tape
Installation
SET CLOCK
ã
«
Exit:
press MENU
Time
15:36
2000
06
Year
Month
Date
Smart clock
08
b Select the line ’Installation’ with the BP r or
ON
AP q button and confirm with the SqC button.
ã
«
Exit:
press MENU
d Check the time in line ’Time’. If required, please change
INSTALLATION
the time with the 0-9 buttons on the remote control.
Add new channels
Sort channels
Autoinstall
Manual store
Set clock
e Check ’Year’, ’Month’ and ’Date’ in the same way.
You can switch between entry fields with BP r or
AP q button. Confirm with the OK button.
Language
ENGLISH
ã
«
Exit:
press MENU
f To end, press the MENU button.
c Select the line ’Language’ with the BP r or
AP q button.
d Select your language with the DSr or SqC
button.
e To end, press the MENU button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic time and date setting
(SMART CLOCK)
DIf a television programme, which transmits TELETEXT, is
stored with programme number ’P01’, time and date will
be set automatically.
DThe time will automatically be adjusted to winter time and
summer time.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’Installation’ with the buttons
BP r or AP q and confirm with the button
SqC .
c Select the line ’Set clock’ with the BP r or
AP q button and confirm with the SqC button.
d Select the line ’Smart clock’ with the menu buttons
BP r or AP q .
e Switch the function on with the menu buttons DSr or
SqC .
f Confirm with the OK button.
g To end, press the MENU button.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3. IMPORTANT NOTES FOR OPERATION
SUMMARY OF USER GUIDE
The OSD menu offers the following functions. More details on each can be found in the appropriate chapter.
PICTURE
MAIN MENU
Brightness
Colour
(,,,,,,,,,
Picture
Sound
(,,,,,,,,,
(,,,,,,,,,
(,,,,,,,,,
NO
Contrast
Setup
Sharpness
Store as pref.
Tape
Installation
ã
«
Exit:
press MENU
ã
«
Exit:
press MENU
Chapter ’TV FUNCTIONS’
User guide (OSD)
The OSD (On-screen display) shows the various functions in
the form of a menu on the television screen. You can then
choose the settings you require. There is a summary of the
menus on this page. The main button functions are displayed
in a help line along the bottom of the screen.
SOUND
Volume
(,,,,,,,,,
Auto volume cont.
Store as pref.
YES
NO
E To call up the menu: With the MENU button.
E To select a line: With the BP r or AP q button.
ã
«
Exit:
press MENU
Chapter ’TV FUNCTIONS’
E To select within a line: With the DSr or SqC
button.
E To enter or change your selection: With the 0-9 ,
DSr or SqC button.
E To enter or change your selection in the TIMER entry
columns: With the BP r or AP q button.
SETUP
E To cancel: With the MENU button.
E To save: With the OK button.
E To confirm: With the SqC button.
E To exit the menu: With the MENU menu button.
Parental control
OFF
Display
MAX
ã
«
Exit:
press MENU
Chapter ’ADDITIONAL FUNCTIONS’
TAPE
Tape speed
Tape counter
Repeat play
Jitter
SP
LEFT
OFF
(,,,,=,,,,$
(,,,,=,,,,$
Tracking
Cleaning
E To confirm the messages in red on the screen: Press the
OK button.
ã
«
Exit:
press MENU
E You can switch the machine on with the P p ,
z
Chapter ’PLAYBACK FUNCTIONS’
or 0-9 button or by putting in a cassette.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Important notes for operation
E We suggest that, from now on, you switch off your
TV-VIDEO Combi with the STANDBY m button on the front
of the set or on the remote control.
When the set is in the standby mode, a small red lamp at
the front of the set will be alight.
E You can switch on with the P p or z button, the
0-9 buttons or by inserting a cassette.
AAttention: If you use the power switch 8 on the side
panel, you switch off the set completely from the mains
power supply. No programmed recordings will then be
made. The red lamp at the front of the set will not be
alight. After some time, the date and clock settings will be
lost.
We advice you to keep your TV-VIDEO Combi connected
to the mains at all times to ensure that programmed
recordings can be made and that the television works
normally. The power consumption will be low.
E Attention: If you switch off the appliance with the power
switch 8 , make sure that you have removed the tape
by pressing the ? button.
E If you diconnect your TV-VIDEO Combi from the mains,
TIMER and channel information will remain stored for
about 1 year and clock information will remain stored for
30 minutes.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
4. TV SET FUNCTIONS
Selecting a TV programme
Volume control
Select the required TV channel (=programme number) with the You can control the volume level with the _Sp
P p button or with the digit buttons 0-9 on the remote
button.
control.
If you want to mute the sound temporarily (e.g.: during a
telephone call), press the y button on the remote control.
When you press the y button again, the sound will return at
its original volume level.
DIf you don’t know the programme number of the required
TV channel:
a Press the P p button for more than 2 seconds.
The TV channel list appears on the screen.
b Select the required TV channel with the P p
button.
Sound settings
After 1 second the TV-VIDEO Combi will switch to
the selected programme number.
a Press the MENU button. The main menu appears.
b Select the line ’Sound’ with the BP r or AP q
button and confirm with the SqC button.
Picture settings
a Press the MENU button. The main menu appears.
b Select the line ’Picture’ with the menu buttons
BP r or AP q and confirm with the menu button
SqC .
SOUND
Volume
(,,,,,,,,,
Auto volume cont.
Store as pref.
YES
NO
ã
«
Exit:
press MENU
PICTURE
Brightness
Colour
(,,,,,,,,,
(,,,,,,,,,
(,,,,,,,,,
(,,,,,,,,,
NO
c Select the line ’Volume’ with the BP r or AP q
Contrast
button and change with the DSr or SqC button.
Sharpness
Store as pref.
DTo store this setting as a standard setting, select the
line ’Store as pref.’ with the BP r or
AP q button. Select ’YES’ and confirm with the
OK button.
ã
«
Exit:
press MENU
DTo call up the standard settings, switch the set off
c Select the required line with the menu buttons BP r or
AP q and alter with the menu buttons DSr or
SqC .
and on again.
Automatic volume control (AVL)
DTo store this setting as a standard setting, select the
line ’Store as pref.’ with the menu buttons
BP r or AP q . Select ’YES’ and confirm with
the OK button.
E Switch on ’Auto volume cont.’, to activate the
automatic volume control. This will minimise sudden
changes in TV volume, e.g. when commercial spots are
being transmitted or when switching TV channels.
d To end, press MENU button.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
How to read TELETEXT
E Press the TELETEXT e button to switch the TXT decoder
on and off. The TV-VIDEO Combi is now receiving the TXT
of the TV channel currently selected.
E To store the current page as preferred page, press the
OK button.
The next time you call up TELETEXT, you will
automatically turn to this page.
E If you want to select an other page, type in the number of
the page with the digit buttons 0-9 . With the colour
buttons on your remote control you can directly select
the page numbers shown at the bottom of the TV screen.
Extra TELETEXT functions
To use the extra TELETEXT functions, press the MENU button,
when you are in TELETEXT.
E To enlarge the print, select the symbol ’g’ and confirm
with the OK button.
E To switch off the TELETEXT decoder temporarily, select
the symbol ’d’ and confirm with the OK button.
E To call up a TELETEXT sub-page:
a Select the symbol ’}’ and confirm with the OK
button.
b Enter the page number of the sub-page with the
0-9 -buttons (e.g.: 0123).
E To call up concealed information, select the symbol ’b’
and confirm with the OK button.
E To stop the pages from being turned over, select the
symbol ’f’ and confirm with the OK button.
E To show TELETEXT transparently, select the symbol ’-’
and confirm with the OK button.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
5. PLAYBACK FUNCTIONS
Playing a cassette
Searching for tape position with the picture
(picture search)
a Put a cassette into the cassette slot.
a While a cassette is playing, press the H (reverse) or
I (forward) button once or several times.
b Press the PLAY G button.
E If you press the STOP h button once, the TV-VIDEO
Combi will switch to pause. To stop, press the STOP h
button again.
b To stop at a certain picture, press the PLAY G button.
DDuring picture search, the picture quality may not be
so good and there will be no sound.
E To eject the cassette, press the ? button on the
TV-VIDEO Combi or press the STOP h button on the
remote control several seconds.
Still picture
DBefore transportation, make sure that no cassette is
a Press the STILL R button. A still picture will appear on
in the TV-VIDEO Combi.
the screen.
DIf you insert an erase protected cassette, the
TV-VIDEO Combi will automatically start playback.
b Each time you press STILL R again, the picture will
move on one step.
DSome hired cassettes may have poor picture or
sound quality. This is not a fault in your machine.
Please read ’Eliminating picture interference’.
Searching for tape position without the
picture (wind and rewind)
DSome functions will automatically switch off after a
while (for example, pause, still picture, picture
search). This helps to protect the cassette and
avoids wasting power.
a Stop the tape with the STOP h button.
b Press the H (reverse) or I (forward) button.
c To stop at a certain picture, press the STOP h button.
Tape position indication
DPress the OK button to display the current tape position. Instant View
DTo change the type of tape position display, proceed as
With this function you can switch to picture search during
wind and rewind.
follows:
a During playback, press the MENU button.
a If you hold the H (rewind) or I (wind) button
during wind or rewind, you will switch to picture search.
b Select the line ’Tape’ with the menu buttons BP r or
AP q and confirm with the SqC button.
b When you release the button, the TV-VIDEO Combi will
automatically switch back to rewind or wind.
c Select the line ’Tape counter’ with the menu
buttons BP r or AP q .
d With the menu buttons DSr or SqC select
’USED’ to check the time used, or ’LEFT’ to check the
time left on the tape.
e Confirm with the OK button.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
d Hold the DSr or SqC button until the picture
quality is at its best.
Automatic search for a tape position (index
search)
e Confirm with the OK button.
At the start of each recording, the TV-VIDEO Combi will write
an index code on the tape.
f To end, press the MENU button.
a Press the INDEX E button. Press the I button to
select the next code mark or the H button for the
previous code mark.
DPlease note, however, that interference may still
occur with poor quality cassettes.
Cleaning the video heads
b When the TV-VIDEO Combi finds the code mark, it will
automatically switch to play.
If horizontal lines appear on the screen when you play a
cassette, you should clean the video heads.
Picture interference
When the picture quality is poor when you play a cassette,
please follow these instructions.
Tracking during playback
a During playback, press the MENU button.
b Select the line ’Tape’ with the buttons BP r or
AP q and confirm with the SqC button.
a During playback, press the MENU button.
c Select the line ’Tracking’ with the buttons BP r or
AP q .
b Select the line ’Tape’ with the menu buttons BP r or
AP q and confirm with the SqC button.
d Hold the buttons DSr or SqC until the playback
quality is at its best.
c Select the line ’Cleaning’ with the menu buttons
BP r or AP q .
e Confirm with the OK button.
d Press the OK button. ’CLEANING’ appears on the
f To end, press the MENU button. This setting will remain
screen.
until you remove the cassette.
e Wait a few seconds, until the message disappears and
Tracking during still picture
then press the MENU button.
If the still picture vibrates vertically, you can improve the still
picture as follows:
a During still picture, press the MENU button.
b Select the line ’Tape’ with the BP r button or
AP q and confirm with the SqC button.
c Select the line ’Jitter’ with the BP r or AP q
button.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
6. MANUAL RECORDING
Use ’Manual Recording’ to make a spontaneous recording (for d Press the RECORD/OTR n button again and again until the
example, a programme currently being shown).
display on the TV-VIDEO Combi shows the desired end
time or length of the recording.
E If you want to start and stop a recording manually, read
the section: ’Recording without automatic switch-off’.
DTo cancel this information, press the CLEAR button.
e Confirm with the OK button.
E If you want to start a recording manually but have it
stopped automatically, read the section: ’Recording with
automatic switch-off’.
f To end, press the MENU button.
Recording without automatic switch-off
Protecting your recordings
a Insert a cassette.
So that you don’t accidentally delete an important recording,
remove the special tab on the narrow side of the cassette with
a screwdriver or slide the special tab to the left. Later, if you
no longer want to protect your recording, you can seal the gap
again with sticky tape or slide the special tab to the right.
b Use the P p button to select the programme number
you want to record, for example, ’P01’.
DProgramme number ’E1’ is provided for recording
from external sources (via the EXT. 1 scart socket).
DProgramme number ’AV’ is provided for recording
from external sources (via the Audio/Video socket
AUDIO at the front of the TV-VIDEO Combi).
Auto-assembling
You can use the auto-assembling function to join individual
recordings without any major picture disturbance between
them.
c To start recording, press the RECORD/OTR n button on the
remote control or 5 on the TV-VIDEO Combi.
When you are recording, the red recording light at the
front panel of the TV-VIDEO Combi will be lit.
a While the cassette is playing, search for the correct
position on the tape.
d Stop recording with the STOP h button.
DIf you want to switch off the screen while recording,
b Stop the cassette by pressing the STOP h button.
press the STANDBY m button once .
’Pause’ will appear on the TV screen.
DTo switch the screen back on again, press the
P p button.
c Now start recording as usual by pressing the
RECORD/OTR n button on the remote control.
DDuring a recording you can watch other TV
channels.
Selecting the recording speed (SP or LP)
Recording with automatic switch-off
(OTR one-touch-recording)
You can reduce the recording speed by half. This makes it
possible to record, for example, eight-hours instead of
four-hours on an ’E240’ (four-hour) cassette.
a Put a cassette in the machine.
a Press the MENU button. The main menu appears.
b Use the P p button to select the programme number
you want to record.
b Select the line ’Tape’ with the BP r or AP q
button, and confirm with the SqC button.
c Press the RECORD/OTR n button on the remote control.
When you are recording, the red recording light at the
front panel of the TV-VIDEO Combi will be lit.
c Select the line ’Tape speed’ with the BP r or
AP q button.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
d Select the required recording speed with the DSr or
SqC button.
D’LP’: Long Play = half recording speed (double
recording time).
’SP’: Standard Play = normal recording speed.
DThe picture quality will be adversely affected when
recording at half recording speed (’LP’).
DFor playback, the correct recording speed will
automatically be selected.
e Confirm with the OK button.
f To end, press the MENU button.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
7. PROGRAMMED RECORDING (TIMER)
Use programmed recording to automatically start and stop a
recording at a later date.
Programming a recording (with ’VIDEO
Plus+’)
To make a programmed recording, your TV-VIDEO Combi
needs to know:
All the information required for a programming is contained in
the PlusCode programming number.
* the date you want to make the recording;
* the programme number for the TV channel you want to
record;
* the start and stop time of the recording;
* whether you want to use VPS or PDC;
* the recording speed (SP/LP).
a Press the TIMER s button on the remote control.
The TV-VIDEO Combi stores all the information in a TIMER
block. You can programme up to 6 TIMER blocks a month in
advance.
b Select the line ’VIDEOPlus’ with the BP r or
AP q button and confirm with the SqC button.
’VPS’ (Video Programming System) and
’PDC’ (Programme Delivery Control)
c Enter the entire PlusCode programming number (up to 9
digits) printed in your TV guide next to the start time of a
TV programme.
For example, 5-234-89 or 5 234 89
With ’VPS and PDC’, the TV station controls the start time and
the length of the recording. This means that the TV-VIDEO
Combi switches itself on and off at the right time even if a TV
programme you want to record begins earlier or finishes later
than expected.
Enter 523489 for the PlusCode programming number.
If you make a mistake, you can clear your instructions
with the CLEAR button.
Usually the start time is the same as the VPS or PDC time. But
if your TV guide gives a VPS or PDC time which is different to
the programme’s start time (for example, 20.15 and VPS 20.14),
you must enter ’20.14’ as the start time.
If you want to programme a time that is different from the VPS
or PDC time, you must switch off VPS or PDC.
VIDEOPLUS
CODE
REPEAT
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1
2
3
4
5
6(
(
(
ONCE
0-9
Store:
press OK
d In line ’REPEAT’ select the kind of programming
required with the BP r or AP q button.
’ONCE’: recording only once
’Mo-Fr’: recordings every day from Monday to Friday.
’Mo-Su’: recordings every day from Monday to Sunday.
’WEEKLY’: recordings every week on the same day of
the week.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
e Confirm with the OK button. Your programming details
Programming a recording (without ’VIDEO
Plus+’)
will then appear on the TV screen.
a Press the TIMER s button on the remote control.
TIMER PROGRAMMING
VPS
DATEPROG. START END
LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
b Select the line ’TIMER PROGRAMMING’ with the
menu buttons BP r or AP q and confirm with the
SqC button.
15 xxx
15:36 15:50
-
*
ONCE
ã
«
è
Store:
press OK
TIMER PROGRAMMING
VPS
DATEPROG. START END
LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
DIf VIDEO Plus+ does not recognise the TV channel,
’P??’ will appear on the TV screen. Instead of
’P??’, you can select the programme number you
want with the number buttons 0-9 .
--
--
--:-- --:---
-
-----
DIf ’Code error’ appears on the TV screen, this
means you entered an incorrect PlusCode number
or the incorrect date. Correct your instructions or
end with the TIMER s button.
ã
«
Exit:
press TIMER
Start:
press
è
c Press the SqC button.
DIf ’Daily error’ appears on the TV screen, the
date was incorrectly entered.
DUnder ’VPS/PDC’, use the BP r or AP q
TIMER PROGRAMMING
button to switch ’VPS or PDC’ on or off.
VPS
DATEPROG. START END
LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
DUnder ’LP’, use the BP r or AP q button to
15 xxx
15:36 15:50
-
*
ONCE
select the recording speed ’SP’ or ’LP’.
DThe TIMER lamp on the front of the set will light up
when one or more of the TIMER blocks are
occupied.
ã
«
è
Store:
press OK
DWhen you are recording, the red recording light at
the front of the TV-VIDEO Combi will be alight.
DIf the end of the cassette is reached during a
recording, the TV-VIDEO Combi will automatically
eject the cassette.
d Select the entry field with the DSr or SqC
button.
DIf you forgot to insert cassette, ’No cassette’
e Enter information with the menu buttons BP r or
will appear.
AP q or with the digit buttons 0-9 .
DIf you have inserted a cassette with erase protection
when you want to start a recording, the cassette will
be ejected.
DUnder ’REP.’, use the BP r or AP q button to
select daily or weekly programming.
’ONCE’: Recording only once.
’Mo-Fr’: Recording from Monday to Friday.
’Mo-Su’: Recording from Monday to Sunday.
’WEEKL’: Recording every week on the same day.
f Press the OK button.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
DUnder ’VPS/PDC’, use the BP r or AP q
button to switch ’VPS or PDC’ on or off.
DUnder ’LP’, use the BP r or AP q button to
select the recording speed ’SP’ or ’LP’.
h To end, press the TIMER s button.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
f Press the OK button.
f Press OK . The timer menu will appear. The required
programming information has been stored in a TIMER
block. Please check the information.
g Confirm the message on the screen with the OK button.
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
TIMER PROGRAMMING
VPS
h Exit the menu with the TIMER s button.
DATEPROG. START END
LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
E The programming information has been stored in a TIMER
15 xxx
15:36 15:50
-
*
ONCE
block.
i Make sure that the cassette you have put in can be
recorded on.
ã
«
è
Store:
press OK
Programming a recording with TELETEXT
g For changing the TIMER information, select the entry field
with the DSr or SqC button. Change the
information with the BP r or AP q button or with
the number buttons 0-9 .
With this function programming a recording will be
considerably easier. In TELETEXT you select the TV
programme you want record. All the required information for
recording will be transferred and stored in a TIMER block. You
can find more information on TELETEXT in the chapter ’TV SET
FUNCTIONS’.
DUnder ’REP.’, use the BP r or AP q button to
select daily or weekly programming.
’ONCE’: Recording only once.
’Mo-Fr’: Recording from Monday to Friday.
’Mo-Su’: Recording from Monday to Sunday.
’WEEKL’: Recording every week on the same day.
a Select the TV channel you want to record from.
DUnder ’VPS/PDC’ switch ’VPS/PDC’ on or off with
b Press TELETEXT e to activate TELETEXT. Your TV-VIDEO
Combi will now show TELETEXT for the TV channel you
have selected.
the BP r or AP q button.
DUnder ’LP’ select the recording speed ’SP’ or ’LP’
with the BP r or AP q button.
c With the number buttons 0-9 select the TELETEXT
programme guide page. This page can be stored as the
preferred page (see paragraph ’How to read TELETEXT’).
h When all information is correct, press OK .
i Confirm the message on the screen with OK .
A Timer recording can only start, if the set is not being
used for other video recorder functions (e.g. playback).
d Press TIMER s . ’PLEASE WAIT’ will briefly appear at
the bottom of the screen.
Next, a highlighted title line will appear.
DThe programming information has been stored in a
DIf ’NO TIMER INFORMATION ON THIS
PAGE’ appears, TELETEXT programming cannot be
used for the programme you have selected. In this
case, you should programme the recording as
described in the paragraph ’programming a
recording’.
TIMER block.
j Exit the menu with the TIMER s button.
k Make sure that the cassette you have put in can be
recorded on.
e Use the BP r and AP q buttons to move the cursor
(h) to the TV programme you want to record.
DIf you want to cancel this function, press
TELETEXT e .
21
Download from Www.Somanuals.com. All Manuals Search And Download.
How to check or change a TIMER
a Press the TIMER s button on the remote control.
b Select the line ’TIMER PROGRAMMING’ with the
menu buttons BP r or AP q and confirm with the
SqC button.
c Select the TIMER you want to check or change with the
BP r or AP q button and confirm with the OK
button.
d Select the entry field with the DSr or SqC
button.
e Change any information with the BP r or AP q
button or with the 0-9 buttons.
DUnder ’LP’, use the BP r or AP q button to
select the recording speed ’SP’ or ’LP’.
f Confirm with the OK button.
g To end, press the TIMER s button.
h Make sure that the cassette you have put in can be
recorded on.
How to clear a TIMER
a Press the TIMER s button on the remote control.
b Select the line ’TIMER PROGRAMMING’ with the
menu buttons BP r or AP q and confirm with the
SqC button.
c Select the TIMER you want to clear with the menu
buttons BP r or AP q .
d Press the CLEAR button.
e Switch off with the TIMER s button.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
8. ADDITIONAL FUNCTIONS
Parental control
Switching the On-screen display (OSD) on
or off
This function will prevent unauthorised use of your TV-VIDEO
Combi. All button-functions will be locked.
You can switch the On Screen Display of the current operating
information on or off.
DYou can make programmed recordings while the parental
control is on.
a Press the MENU button. The main menu appears.
a Press the MENU button. The main menu will appear.
b Select the line ’Setup’ with the menu buttons
BP r or AP q and confirm with the SqC button.
b Select the line ’Setup’ with the BP r or AP q
button and confirm with the SqC button.
SETUP
SETUP
Parental control
OFF
Display
MAX
Parental control
OFF
Display
MAX
ã
«
Exit:
press MENU
ã
«
Exit:
press MENU
c Select the line ’Display’ with the menu buttons
BP r or AP q .
c In the line ’Parental control’ select ’ON’ with
the DSr or SqC button.
d Select one of the options indicated with the menu buttons
SqC or DSr .
d Confirm with the OK button.
’MAX’: The OSD appears for a few seconds each time an
operating mode is selected and then disappears.
’MIN’: The OSD is reduced to a minimum.
’PROGR.’: The programme number is always shown.
’COUNTER’: The tape position is always shown.
e To end, press the MENU button.
Keep the remote control in a safe place.
f Switch off the machine with the STANDBY m button.
DIf you want to switch off parental control, select
e Confirm with the OK button.
’OFF’ in line ’Parental control’.
DIf a button is pressed with activated parental
control, ’Parental Control active’ will
appear.
f To end, press the MENU button.
DWith the OK button you can superimpose the On
Screen Display of current operating mode on the TV
screen.
DIf you have activated parental control, you can only
operate the TV-VIDEO Combi with the remote
control.
DIf you want to eject a cassette with activated
parental control, press the STOP h button several
seconds.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Continuous playback
Switch off function (SLEEP TIMER)
You can automatically play a cassette again and again. When
the end of the tape or the recording has been reached, it will
rewind and start again.
You can programme your set to switch off after a
predetermined period.
a Press the TIMER s button on the remote control.
a Press the MENU button. The main menu appears.
b Select line ’Sleep timer’ with the BP r or
b Select the line ’Tape’ with the menu buttons BP r or
AP q button and confirm with the SqC button.
AP q . Confirm with the menu buton SqC .
c Determine the time left until switch off in 15 minutes
intervals using the BP r or AP q button.
DYou can switch the function off with the CLEAR
button on the remote control.
TAPE
Tape speed
Tape counter
Repeat play
Jitter
SP
d Confirm with the OK button.
LEFT
OFF
(,,,,=,,,,$
(,,,,=,,,,$
Tracking
e To end, press the TIMER s button.
Cleaning
ã
«
Exit:
press MENU
Switch on function (WAKE-UP TIMER)
c Select the line ’Repeat play’ with the menu buttons
You can programme your set to switch on at a predetermined
time.
BP r or AP q .
d Select ’ON’ with the menu buttons DSr or
SqC . If you select ’OFF’, the function will be
switched off.
a Press the TIMER s button on the remote control.
b Select line ’Wake-up timer’ with the BP r or
AP q button and confirm with the SqC button.
e Confirm with the OK button.
c Select the entry field with the DSr or SqC
f Press the MENU button.
button.
d Enter the information with the BP r or AP q button
or with the number buttons 0-9 .
e In the line ’ON’, switch the function on or off.
f Press the OK button.
g To end, press the TIMER s button.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Before you call an engineer
If, contrary to expectation, you have any problems using this
TV-VIDEO Combi, it may be caused by one of the reasons
mentioned below. You can also call the customer service
centrein your country.
You will find the phone number in the enclosed guarantee
leaflet.
’Smart Clock’ setting does not work:
•
You have stored a TV channel on programme number ’P01’ that
does not transmit TELETEXT: On ’P01’ store a TV channel that
transmits TELETEXT.
•
•
Poor TELETEXT reception: On ’P01’ store a TV channel with
good TELETEXT reception.
You have not activated the Smart Clock function: Switch the
function ’ON’.
Your TV-VIDEO Combi does not respond to any button being
pressed:
You hear a very short and soft noise coming from your
TV-VIDEO Combi at 3:00 at night:
•
•
There is no power supply: check the power supply
A programmed recording is currently being made: cancel the
programmed recording with the STANDBY m button.
Parental control is on: switch the parental control off.
Continuous playback is on: switch the continuous playback off.
There is a technical problem: switch off with the 8 power
switch for 30 seconds, then switch it on again.
•
’Smart Clock’ is checking the time: Switch off the Smart Clock
function.
•
•
•
TELETEXT does not start at page 100:
•
You have stored a different preferred page: Store page 100 as
preferred page.
Cassette is jammed in the TV-VIDEO Combi:
•
Don’t use force. Switch off with the 8 power switch for 30
Technical terms used
seconds, then switch it on again.
Remote control does not work:
Current tape position : The part of the tape currently being
played.
•
Remote control not pointed toward the TV-VIDEO Combi: point it
at the TV-VIDEO Combi.
External source : A device connected via a socket (for
example, scart socket) which is transmitting audio/video
signals to the TV-VIDEO Combi.
Index marking : A marking which is automatically made on the
tape at the beginning of every recording. This marking
(recording ID) can be searched for with the Index search
function.
Scart cable : Also known as a Euro-AV cable. This standard
cable is an easy method of connecting various TV, audio and
video devices, such as a HIFI and Dolby Surround set, video
recorder, DVD player, SAT receiver, decoder, computer and
similar devices. Other signals in addition to audio and video
signals can be transmitted on it.
•
Batteries have run out: change the batteries.
No picture when you play a cassette:
•
There is no recording on the cassette: change the cassette.
Poor picture quality when you play a cassette:
•
•
The cassette badly worn or of poor quality: use new cassette.
Tracking is not properly adjusted or the video heads are dirty:
turn to chapter ’PLAYBACK’ and read the section ’Cleaning the
video heads’.
Read the section ’Eliminating picture interference’.
You are playing a cassette with a LongPlay recording on it:
Excellent picture quality is only guarateed with recordings made
in StandardPlay recording speed.
•
•
TV system : There are various systems for transmitting
television signals, for example, PAL, SECAM, PAL BG, SECAM
DK, SECAM L/L, NTSC etc. The system used by your television
depends on which country you are in.
TXT : Also known as Teletext, Fasttext, Videotext, FLOF etc.
OTR : One touch recording. This function enables you to select
the switch-off time in intervals of 30 minutes.
The TV-VIDEO Combi will not record:
•
The TV channel you want to record is not stored or you selected
the wrong programme number: check TV channels stored.
You have loaded a cassette which cannot be recorded on: undo
the erase protection on the cassette.
•
Programmed recording does not work:
•
•
You have not set the TIMER properly: check the TIMER blocks.
You have programmed the wrong time or date: check time and
date.
•
•
You have put in a cassette that cannot be recorded on: undo the
erase protection on the cassette.
’PDC’ or ’VPS’ switched on but ’PDC/VPS time’ wrong: enter PDC
or VPS time exactly to the minute. Have the aerial checked.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
3103 166 26421
0073/011
14PV330/07-14PV334/335/07
(WwnnNNNwwnwNNnwnWwnNnwWnNNwnnW)
Download from Www.Somanuals.com. All Manuals Search And Download.
|