Philips TV VCR Combo 14PV111 07 User Manual

TVCR  
14PV111/07 14PV112/07  
14PV415/07 14PV203/07 14PV460/07  
Make sure that children do not place any  
foreign objects within the openings or venti-  
lation slots.  
These operating instructions have been  
printed on non-polluting paper.  
Deposit old batteries at the appropriate col-  
lection points.  
Please make use of the facilities available  
in your country for disposing of the packag-  
ing of the TV-Video combi in a way that  
helps to protect the environment.  
Thank you for buying a Philips TV-Video combi.  
This TV-Video combi is one of the most sophisti-  
cated and easy-to-use TV-Video combi on the  
market. Please take the time to read this operat-  
ing manual before using your TV-Video combi. It  
contains important information and notes regard-  
ing operation. The TV-Video combi should not  
be turned on immediately after transporta-  
tion from a cold to a hot area or vice versa, or  
in conditions of extreme humidity. Wait at least  
three hours after transporting the device. The  
TV-Video combi needs this time in order to  
become acclimatised to its new environment  
(temperature, air humidity, etc.).  
!
This electronic device contains many materials  
that can be recycled. Please enquire about the  
possibilities for recycling your old device.  
So that you can identify your machine for service  
questions or in the event of theft, enter the serial num-  
ber here. The serial number (PROD.NO.) is printed on  
the type plate fixed at the back of the device.  
PAL  
This TV-Video combi is used for the recording and  
playback of VHS videocassettes. Cassettes with  
the VHS-C label (VHS cassettes for camcorders)  
may only be used with a suitable adapter.  
MODEL NO.  
PROD. NO.  
:
14PV111/07, 14PV112/07, 14PV415/07  
We hope you enjoy your new TV-Video combi.  
14PV203/07, 14PV460/07  
...........................  
Important notes regarding operation  
This product complies with the requirements of  
Directive 73/23/EEC +89/336/EEC +93/68 EEC.  
Danger: High voltage!  
There is a risk of an electrical shock!  
"
Interference  
The TV-Video combi does not contain any  
"
components that can be repaired by the  
customer. Please leave all maintenance  
work for qualified personnel.  
The Department of Trade and industry operates a  
Radio lnvestigation Service to help TV licence hold-  
ers improve reception of BBC and ITC programmes  
where these are being spoilt by interference.  
If your dealer cannot help, ask at a Main Post  
Office for the booklet 'How to lmprove Television  
and Radio Reception'.  
As soon as the TV-Video combi is connect-  
"
ed to the power supply, some components  
are in constant operation. To-switch off the  
TV-Video combi completely you must dis-  
connect it from the mains or switch it off  
with the main switch.  
Specifications  
Voltage: 230-240V/50Hz  
Power consumption : 52W  
Power consumption (Standby): less than 4W  
Rewind time: less than 240 seconds (cassette E-180)  
Weight without packing in kg: 11.5  
Dimensions in cm (HxWxD):40.0x37.3x38.0  
Number of video heads : 2  
Recording/playback time: 3 hours (SP)  
(cassette E-180)  
6 hours (LP) (cassette E-180)  
Make sure that air can circulate freely  
!
through the ventilation slots on the TV-  
Video combi. Do not place the device on an  
unsteady base.  
Make sure that no objects or liquids enter  
!
the TV-Video combi. Do not place vases or  
the like on the TV-Video combi. If liquid is  
spilt into it, immediately disconnect the TV-  
Video combi from the power supply and call  
After-sales Service for advice.  
Supplied accessories  
Do not place any combustible objects on  
the device (candles, etc.).  
• Operating instructions  
• Remote control and batteries  
!
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front of the device  
STANDBY  
Power switch: To switch the TV-Video Combi off.  
Caution: If you switch off using the power switch, TIMER-recordings are impossible!  
y
5
P-  
Standby/on: To switch TVCR On or Off or to interrupt a menu function.  
+
Volume: In connection with the button  
,
to adjust the volume.  
Programme number minus: previous programme number  
Programme number plus: next programme number  
P+  
I
Record: To record the programme currently selected.  
B
Playback: To play a recorded cassette.  
C
/A  
Pause/Stop, eject cassette: To stop the tape; If this key is depressed while in STOP, the cassette is then  
ejected from the machine.  
When tape playback is stopped, press to fast forward the tape at high speed.  
1
0
When tape playback is stopped, press to rewind the tape at high speed.  
Sockets on the front:  
White socket / AUDIO input socket: To connect a camcorder or video games (audio).  
VIDEO  
Yellow socket /  
Small socket /  
input socket: To connect a camcorder or video games (video).  
socket for headphones: To connect headphones.  
Back of the set  
Aerial input socket: To connect the aerial cable.  
EXT1/AV1 Scart socket :To connect a satellite receiver, decoder, video recorder, etc.  
The control lights at the front of machine  
STANDBY  
Standby LED: lights up when the TV-Video Combi has been switched On by means of the main  
switch.  
RECORD  
Recording LED: lights up during recording.  
Fast blink: RECORDING PAUSE; TIMER RECORDING NOT STAND-BY.  
Slow blink: TIMER RECORDING is stored in a timer block.  
EN  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Connecting the TV-Video Combi  
1.Take the remote control and the enclosed  
Important for the United Kingdom  
batteries (2 batteries).  
This apparatus is fitted with an approved 5 Amp plug.  
To change a fuse in this type of plug proceed as fol-  
lows:  
1.Remove fuse cover and fuse.  
2.Fix new fuse which should be a BS1362  
5A,ASTA or BSI approved type.  
2.Open the remote control's battery compart-  
ment and place the batteries in it as shown in  
the picture and close the battery compart-  
ment.  
The remote control is now ready to use.  
Its range is approximately 7 metres.  
3.Refit the fuse cover.  
Connecting the cable  
If the fitted plug is not suitable for your socket  
outlets, it should be cut off and an appropriate  
plug fitted in its place.  
If the mains plug contains a fuse, this should  
have a value of 5A. If a plug without a fuse is  
used, the fuse at the distribution board should  
not be greater than 5A.  
The severed plug must be destroyed to avoid a  
possible shock hazard should it be inserted into a  
13A socket elsewhere.  
How to connect a plug:  
1.Insert the aerial cable plug into the AERIAL  
at the back of the TV-Video Combi.  
2.Connect the mains cable to the wall socket.  
The wires in the mains lead are coloured in  
accordance with the following code:  
BLUE- 'NEUTRAL' ('N')  
3.If the little red standby light (STANDBY ) at  
the front panel of the set is not lit, please  
switch on the set using the main power  
BROWN- 'LIVE' ('L')  
4.The BLUE wire must be connected to the ter-  
minal which is marked with the letter 'N' or  
coloured BLACK.  
5.The BROWN wire must be connected to the  
terminal which is marked with the letter 'L' or  
coloured RED.  
6.Do not connect either wires to the earth ter-  
minal in the plug which is marked with the  
letter 'E' or by the safety earth symbol  
coloured green or green-and-yellow.  
switch. The power switch  
left side panel of the set.  
is located on the  
This text will appear on the TV screen.  
PLEASE CONNECT AERIAL OR  
CABLE TO THE TVCR  
THEN...  
or  
KEY  
PUSH P+  
OR...  
Before replacing the plug cover, make certain  
that the cord grip is clamped over the sheath of  
the lead-not imply over the two wires.  
FOR PLAY ONLY PUSH PLAY  
You can find more details in chapter 'Preparation  
for use'.  
Connecting additional devices  
Preparing the remote control for  
operation  
You can connect additional devices such as  
decoders, satellite receivers, camcorders, etc. to  
the EXT1 socket..  
The remote control and its batteries are packed sepa-  
rately in the original TV-Video Combi packaging. You  
must install the batteries in the remote control before  
use.  
The respective scart socket is usually marked  
'
AV  
'
or  
'TV' on the decoder or satellite receiver.  
EN  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Important notes for operation  
Switching on  
You can switch TV-Video Combi on with  
Navigation in the screen menu  
You can check/change many functions and set-  
tings of your TV-Video Combi via on-screen  
menu. The individual functions are selected, via  
the remote control as follows:  
STANDBY/ON y  
.
Power outage/no power  
Channel information remains saved for up to 10  
year, the time and timer information is saved for  
up to 1 minute.  
MENU  
Call up the menu: with  
.
K B L C  
To select: with  
.
To enter or change your selection: with the  
K B L C  
number buttons 0..9 or with  
.
B 1  
To save or confirm: with  
.
To cancel: with CLEAR .  
STATUS/EXIT  
To end: with  
.
SELECT K L CHOOSE B  
TIMER  
PICTURE CONTROL  
RECORD SET UP  
VCR SET UP  
TUNER SET UP  
GENERAL SET UP  
END=EXIT  
3. Installing your TV-Video Combi  
<14PV203/07, 14PV460/07>  
Preparation for use  
3.'TIME' and 'DATE' will appear on the TV  
screen.  
1.After you have connected the aerial or cable,  
confirm the picture on the TV screen with  
B 1  
TIME --:--  
.
Connecting additional devices  
DATE --/--/--  
After you have connected additional devices  
(satellite receiver, etc.) through the aerial cable,  
switch them on. The automatic channel search  
will recognise them and save them.  
SMART CLOCK [ON]  
END=EXIT  
2.The automatic TV channel search starts.  
This picture will appear on the screen.  
4.Check 'TIME'. If required, please change the  
0..9  
time with the number buttons  
.
5.Check if the displayed settings for 'DAY',  
'MONTH' and 'YEAR' are correct.  
6.When all information is correct, save by  
STATUS/EXIT  
PLEASE WAIT  
pressing  
.
START  
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚  
FINISH  
The preparation for use is now complete.  
Satellite receiver  
If you are connecting a satellite receiver, please  
read the section 'Using the satellite receiver'.  
Decoder  
If you are connecting a decoder, you must  
install it as described in the next section.  
When automatic TV channel search is com-  
plete,'AUTO TUNING COMPLETE' will  
appear on the TV screen.  
EN  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Decoder allocation  
Manual TV channel search  
Some TV channels transmit encoded TV signals  
which can only be viewed with a commercially  
purchased or rented decoder without distur-  
bances. You can connect such a decoder to this  
TV-Video Combi. The following function will auto-  
matically activate the connected decoder for the  
desired TV channel.  
In some cases it could occur that all of the TV  
channels were not found and saved during the  
Preparation for use. In this case, the missing or  
coded TV channels must be searched for and  
stored manually.  
MENU  
1.Press  
. The main menu will appear.  
K B L C  
2.Select 'TUNER SET UP' with  
and  
0..9  
to select the TV chan-  
P+  
1.Use  
P- or  
,
B 1  
confirm with  
.
nel which you would like to allocate the  
K B L C  
3.Select 'MANUAL TUNING' with  
decoder to.  
B 1  
.
K B L C  
and confirm with  
MENU  
2.Press  
3.Use  
. The main menu will appear.  
to select 'TUNER SET UP'.  
4.Select 'PROG.' with  
. Then press  
K B L C  
B 1  
.
B 1  
Then press  
4.Use  
.
MANUAL TUNING  
K B L C  
to select 'MANUAL TUNING'.  
PROG.  
CHANNEL  
DECODER  
SKIP  
P55  
055  
[OFF]  
[OFF]  
B 1  
Then press  
5.Use  
.
K B L C  
to select 'DECODER'.  
MANUAL TUNING  
SELECT K L CHOOSE B  
END=EXIT  
PROG.  
CHANNEL  
DECODER  
SKIP  
P55  
055  
[OFF]  
[OFF]  
K B L C  
0..9  
5.With  
, select the desired  
or  
programme number that you want to use for  
SELECT K L CHOOSE B  
END=EXIT  
B 1  
the TV channel, e.g. 'P01'. Then press  
.
What is a special channel?  
TV channels are transmitted in certain pre-defined  
frequency ranges. These ranges are divided into  
channels.  
B 1  
6.Use  
to select 'ON'  
(Decoder switched on).  
A specific frequency/channel is assigned to each  
TV station.  
Certain frequency ranges are specified as special  
channels (hyperband channels).  
How can I switch off the decoder?  
B 1  
Use  
off).  
to select 'OFF' (Decoder switched  
K B L C  
6.Select 'CHANNEL' with  
, and con-  
STATUS/EXIT  
7.To end, press  
.
B 1  
firm with  
nel with  
. Then enter the desired chan-  
The decoder has now been allocated to this TV  
channel.  
0..9  
.
When a channel is found,it will stop searching. If  
B 1  
this is the channel you want, press  
. If you  
'
'
set SKIP on for a channel, this channel will be  
ignored when going through the channels with  
P+  
P–  
or  
.
To search for other TV channels, begin again at  
step 4.  
I don't know the channels for my TV stations In  
K B L C  
this case, press  
in 'CHANNEL' to start  
the automatic channel search. A changing channel  
number will appear on the TV screen. Continue the  
automatic search until you have found the desired  
TV channel.  
STATUS/EXIT  
7.To end, press  
.
EN  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sorting and clearing TV channels  
manually  
Using the satellite receiver  
You can receive channels from the satellite  
AV1/EXT1  
receiver via the scart socket  
.
You can use this function to individually sort the  
TV channels already saved or to delete unwant-  
ed TV channels or those with poor reception.  
To do this, select the channel number 'AV1' by  
0..9  
pressing 0,0,1, with the keys  
on the remote  
control.You will have to select the channel you  
want to receive on the satellite receiver itself.  
The clock resets automatically  
If you save a TV channel that transmits TXT/PDC  
on programme number ‘P01’, date and time will  
and constantly be updated. As a result, time  
changes, i.e. daylight savings time, will be set  
automatically.  
Automatic Tuning  
During installation, all available TV channels are  
searched for and saved. If you want to replace  
the TV channels already saved with the new  
ones, follow the instructions below.  
MENU  
MENU  
1.Press  
. The main menu will appear.  
K B L C  
2.Select 'TUNER SET UP' with  
and  
1.Press  
. The main menu will appear.  
B 1  
confirm with  
.
K B L C  
2.Select 'TUNER SET UP' with  
and  
K B L C  
3.Select 'MOVE' with  
, and confirm  
B 1  
confirm with  
3.Select 'AUTO TUNING' with  
confirm with  
.
B 1  
with  
.
K B L C  
and  
B 1  
.
MOVE  
P01: 02  
P02: 03  
P03: 05  
P04: 10  
P05: 74  
P06: 90  
P07: 99  
P08: 121  
P09: 124  
P10: 130  
PLEASE WAIT  
SELECT K L CHOOSE B  
END=EXIT  
START  
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚  
FINISH  
K B L C  
4.With  
, select the saved TV chan-  
nel that you want to move.  
4.The automatic TV channel search starts. This  
allows the TV-Video Combi to save all avail-  
able TV channels. This procedure may take  
several minutes.  
B 1  
5.Confirm with  
.
K B L C  
6.Move the selected channel with  
the programme number you want to assign.  
to  
5.When the TV channel search is complete,  
'AUTO TUNING COMPLETED' will briefly  
appear on the TV screen.  
B 1  
Then press  
. The programme number  
will change to '_ _'.  
B 1  
7.Confirm with  
.
8.To assign other TV channels to a programme  
number, repeat steps 4 to 7.  
9.Confirm the assignment of the TV channel  
with  
.
MOVE menu  
STATUS/EXIT  
10.To exit the  
, press  
MOVE menu  
.
The following sorting of TV channels is recom-  
mended:  
P01: BBC1  
P02: BBC2  
P03: ITV  
P04: CH4  
P05: CH5  
P06: SKY  
and then all other TV channels.  
EN  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.Check the time in 'TIME'. If required, please  
Setting the clock  
0..9  
change the time with  
.
If the display shows an incorrect time or ' --:-- '  
the time and date must be reset manually.  
MENU  
5.Check 'DAY', 'MONTH' and 'YEAR' in the  
same way.  
(Choose 'SMART CLOCK' ON or OFF with  
1.Press  
. The main menu will appear.  
B 1  
K B L C  
. [14PV203/07, 14PV460/07] )  
2.Select 'GENERAL SET UP' with  
B 1  
and confirm with  
3.Select 'CLOCK' with  
B 1  
.
K B L C  
<14PV203/07, 14PV460/07>  
Time/date is displayed incorrectly despite  
manual setting  
and confirm  
with  
.
* With Smart Clock, if you save a TV channel  
that transmits TXT/PDC on programme num-  
ber 'P01', date and time will automatically be  
TIME --:--  
DATE --/--/--  
SMART CLOCK [ON]  
updated when the TV-Video Combi is in  
Stand-  
.
by  
If you wish to switch this automatic time cor-  
rection off, select 'OFF' for Smart Clock. You  
can reactivate this function at any time by  
selecting Smart Clock 'ON'.  
END=EXIT  
STATUS/EXIT  
6.To end, press  
.
4. TV SET FUNCTIONS  
Selecting a TV channel  
Volume control  
Select the desired TV channel (= the programme  
5 K 5 L  
,
You can adjust the volume using  
the remote control.  
on  
0..9  
P+  
P-  
number) with  
remote control.  
,
or with  
on the  
If you would like to change the volume on the  
5
-
5
+
machine, press  
Combi.  
or  
on the TV-Video  
Selection of the scart socket  
If you want to mute the sound temporarily  
To select the Scart socket, please enter 0,0,1,  
MUTE  
(e.g.:during a telephone call), press  
on  
0..9  
with the keys  
on the remote control. AV1  
MUTE  
the remote control. When you press  
appears on the screen.  
again, the sound will return at its original vol-  
ume level.  
Selection of the front A/V sockets  
To select the front A/V sockets, please enter  
0..9  
0,0,2, with the keys  
on the remote control.  
'AV2' appears on the screen.  
EN  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture settings  
Special TELETEXT functions  
(14PV203/07, 14PV460/07)  
The picture can be adjusted according to your  
personal preferences.  
These settings are automatically stored after  
exiting the main menu.  
In TELETEXT mode you can use the special  
TELETEXT functions.  
o
l
p
: enlarge font  
MENU  
1.Press the  
appear.  
. The main menu will  
: switch TELETEXT decoder off  
temporarily  
K B  
2.Select 'PICTURE CONTROL' with  
: recall hidden information  
B 1  
L C  
and confirm with  
.
L C  
p
l
o
: stop page changes  
K B  
3.Select an item using  
, and then  
: go back to start page  
B 1  
s 0  
modify with  
.
STATUS/EXIT  
4.To end, press  
.
Switch-off function (SLEEP TIMER)  
SELECT K L ADJUST s  
B
/
You can programme your set to switch-off auto-  
matically after a predetermined period.  
SLEEP  
BRIGHTNESS  
CONTRAST  
COLOUR  
SHARPNESS  
TINT  
<
<
<
<
<
>
>
>
>
>
1.Press  
.
The screen will show the time remaining until  
switch-off, e.g.: '+0:30'.  
END=EXIT  
SLEEP  
2.Press  
repeatedly to extend the time  
until switch-off in 30 minute increments.  
The machine now counts backwards to the  
switch-off time.  
'TINT' appars only when receiving NTSC signals  
from another source.  
The maximum time period to be set until switch-  
off is 2 hours.  
How do I read TELETEXT?  
(14PV203/07, 14PV460/07)  
Many TV channels transmit TELETEXT informa-  
tion along with their TV channels. With this TV-  
Video Combi you can retrieve this information  
and display it on the screen using the built-in  
TELETEXT decoder.  
If you would like to turn this function off, press  
SLEEP  
on the remote control several times  
until switch-off appears. '--:--' will appear on the  
screen.  
TEXT  
SLEEP  
1.Press  
to switch the TELETEXT  
To check the time until switch-off, press  
decoder on. Your TV-Video Combi will now  
show TELETEXT for the TV channel you  
on the remote control.  
If a recording is in process, switch-off function  
will be cancelled.  
TEXT  
have selected. Press  
again to show  
TELETEXT in transparent mode.  
2.If you want to select another page, type in  
the number of the page with the number but-  
0..9  
tons  
on the remote control.  
With the colour buttons on your remote control  
you can directly select the page numbers  
shown at the bottom of the TV screen.  
The button  
page.  
takes you back to the start  
TEXT  
3.Press  
decoder off.  
to switch the TELETEXT  
EN  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Playback  
Playing cassettes  
Searching for a tape position with  
picture (scanning)  
You can use this TV-Video Combi to playback  
recorded VHS video cassettes. You can operate  
the TV-Video Combi using the remote control or  
the buttons on the set.  
Your TV-Video Combi can only record and play  
standard VHS cassettes.  
s 0  
1.While a cassette is playing, press  
(reverse) or  
times.  
B 1  
(forward) one or more  
K B  
2.Press  
to resume playback.  
1.Put a cassette into the cassette slot. The  
cassette is inserted automatically.  
Still picture  
DIGITAL STUDIO PICTURE CONTROL  
Philips has developed a system which produces  
the best possible playback quality. For old and  
often-used video cassettes, this system  
reduces interference. For new or high quality  
cassettes, it emphasises the details.  
2
STILL  
1.During playback, press  
tape and display a still picture.  
2.To continue playback, press  
Scanning and still motion interferes with the pic-  
ture quality. The sound is switched off. This is not  
a fault in your TV-Video Combi.  
to stop the  
.
K B  
Picture/ sound quality is poor  
When playing rental videos or older, poorer  
quality cassettes, it may not be possible to  
completely filter out picture and sound interfer-  
ence. This is not a fault in your machine. Read  
the section 'Manual tracking'.  
Searching for tape position without  
picture (forward wind and rewind)  
L C  
1.Stop the tape with  
.
B 1  
s 0  
2.Press  
(reverse) or  
(forward).  
L C  
3.To stop the tape, press  
.
K B  
2.Press  
to view the tape.  
C/A  
L C  
3.To stop the playback, press  
the TV-Video Combi.  
or  
on  
Manual Tracking  
To adjust the tracking manually, press P+ or  
A
4.To eject the cassette, press EJECT  
or  
C/A  
when the TV-Video Combi stops the  
P-  
.
on the TV/VCR during playback  
playback.  
Tracking returns to Automatic Tracking  
L C  
Adjustment when you press  
tape.  
or insert a  
Do I need to change the playback speed  
when playing back LP recordings?  
During playback, the correct speed will auto-  
matically be selected. For more information,  
please read the section 'Selecting the recording  
speed (SP or LP)' in the chapter 'Manual  
recording'.  
Playing back NTSC cassettes  
Cassettes that have been recorded in the NTSC  
standard (for example, American cassettes) can  
be played back using this TV-Video Combi.  
EN  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Manual recording  
General information  
Lining up recordings (assemble cut)  
When you add a further recording to a cassette,  
which already has a recording on it, a short  
blank (flicker) can appear between the old and  
the new recording or the picture itself can flicker.  
To help reduce these from occurring, proceed as  
follows:  
1.Find the tape position of the old recording  
where you want to insert the new recording.  
2.Look at the last minute of the old recording  
(playback).  
Use 'Manual Recording' to make a sponta-  
neous recording (for example, a programme cur-  
rently being shown).  
If you want to start and stop a recording manual-  
ly, read the section 'Recording without auto-  
matic switch-off'.  
If you want to start a recording manually but  
have it stopped automatically, read the section  
'Recording with automatic switch-off'. (e.g.  
not to record to the end of the tape)  
Read the section 'Automatic recording from a  
satellite receiver', if you want a recording to be  
controlled automatically by a satellite receiver.  
STILL 2  
3.Press  
at the tape position where  
the new recording is to go and press  
RECORD/OTR I  
.
4.Now start recording as usual by pressing  
Recording without automatic  
switch-off  
RECORD/OTR I  
on the remote control.  
L C  
5.Stop recording with  
.
1.Insert a cassette.  
0..9  
to select the pro-  
P+  
P-  
2.Use  
or  
Selecting the recording speed (SP  
or LP)  
gramme number you want to record, for  
example, 'P01'.  
LP allows to double the recording duration on tape  
(for example six hours instead of three hours on a  
E180 cassette).  
RECORD/OTR I  
3.To start recording, press  
4.To stop recording, press  
.
L C  
.
1.Press MENU . The main menu will appear.  
2.Select 'RECORD SETUP' with  
L C  
K B  
Recording with automatic switch-off  
(OTR One-Touch-Recording)  
B 1  
and confirm with  
.
1.Insert a cassette.  
SELECT K L CHOOSE B  
P+  
P-  
0..9  
to select the pro-  
2.Use  
or  
RECORD SPEED  
[SP]  
gramme number you want to record.  
RECORD/OTR I  
3.Press  
.
RECORD/OTR I  
4.Each time you press  
you will  
add 30 minutes to the recording time.  
END=EXIT  
3.Select the required recording speed with  
Preventing accidental erasing of  
cassettes  
B 1  
.
STATUS/EXIT  
4.To end, press  
.
All cassettes (except for rental and pre-recorded  
purchased cassettes) have a security tab on the  
back of the cassette.  
To prevent recording  
over important record-  
ings (erasing), you can  
remove this security tab.  
If you later decide to  
record on a protected cassette, simply cover the  
hole with adhesive tape.  
'SP'/'LP'  
'SP': StandardPlay (normal recording speed)  
offers the usual first-class picture quality.  
'LP': LongPlay (half recording speed, double  
recording time). 6 hours can be recorded on a 3-  
hour cassette (E180) with a somewhat reduced  
picture quality.  
EN  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Programming a recording (TIMER)  
Programming a recording  
General information  
Use a TIMER programming to automatically  
start and stop a recording at a later time or date.  
The TV-Video Combi will switch to the right pro-  
gramme number and begin recording at the cor-  
rect time. With this TV-Video Combi, you can pre-  
programme up to eight recordings within a peri-  
od of one year. To make a programmed record-  
ing, your TV-Video Combi needs to know:  
1.Press MENU . The main menu will appear.  
K B  
L C  
2.Select 'TIMER' with  
. Then press  
B 1  
.
3.Select ONCE, DAILY, or WEEKLY recording  
K B L C  
B 1  
with  
. Then press  
.
SELECT K L CHOOSE B  
*the date you want to make the recording  
*the programme number of the TV channel  
*the start and stop time of the recording  
*PDC on or off (14PV203/07, 14PV460/07)  
This information is saved in a TIMER block.  
ONCE  
DAILY  
WEEKLY  
TIMER LIST  
END=EXIT  
<14PV203/07, 14PV460/07>  
What is 'PDC'?  
If all TIMER blocks are in use, 'FULL' will appear  
'PDC' (Programme Delivery Control) is used to  
control the start and duration of TV channel  
recordings. If a TV programme starts earlier or  
ends later than scheduled, the TV-Video Combi  
will turn on and off at the correct time.  
What do I need to know about 'PDC'?  
Usually the PDC time is the same as the start  
time. But if your TV guide shows a PDC time  
which is different from the programme’s sched-  
uled start time, e.g. 20.10 (PDC 20.14), you  
must enter the PDC time exact to the minute. If  
you want a start time different from the PDC  
time, you must switch PDC off.  
on the TV screen.  
4.Select TIMER block with  
Selecting once/daily/weekly recordings  
0..9  
.
K B L C  
Use  
to select from the following  
options:  
'ONCE': Recording once  
'DAILY': Repeated daily recordings from  
Monday to Friday  
'WEEKLY': Repeated weekly recordings (every  
week on the same day)  
0..9  
5.With  
buttons you can enter 'START'  
(start time) , 'STOP' (end time) , 'PROG.'  
(programme number) ‘VPS/PDC’ and 'DATE'.  
Problems and solutions for pro-  
grammed recordings  
Programming a recording from the external  
sources  
You can also programme recording from an  
external source via the Scart socket AV1 or the  
front A/V connectors AV2.  
The TV-Video Combi will not operate  
* If you want to cancel the programmed record-  
C/A  
ing,press  
.
Cassette is ejected during recording  
* The end of the tape was reached during  
recording.  
6.When all inputs are correct, press  
STATUS/EXIT  
. The programming information  
is stored in a TIMER block.  
7.Insert a cassette with an intact security tab  
(unprotected).  
EN  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to change a programmed  
recording (TIMER)  
How to check, change or delete a  
programmed recording (TIMER)  
1.Press MENU . The main menu will appear.  
1.Press MENU . The main menu will appear.  
K B  
L C  
K B  
L C  
2.Select 'TIMER' with  
. Then press  
2.Select 'TIMER' with  
. Then press  
B 1  
B 1  
.
.
3.Select ONCE, DAILY, or WEEKLY recording  
K B  
L C  
3.Select 'TIMER LIST' with  
, and  
K B L C  
B 1  
B 1  
with  
. Then press  
.
confirm with  
.
0..9  
4.Select a TIMER block with  
. (The flash-  
SELECT K L CHOOSE B  
ing number indicates an empty TIMER  
block.)  
ONCE  
DAILY  
WEEKLY  
TIMER LIST  
ONCE  
TIMER - 1 2 3 4 5 6 7 8 -  
END=EXIT  
SELECT TIMER NUMBER  
END=EXIT  
B 1  
4.Select timer block with  
.
CLEAR  
5.To cancel the recording, press  
.
STATUS/EXIT  
6.To end, press  
.
CLEAR  
5.Press  
to delete information, and  
0..9  
.
input correct information with  
STATUS/EXIT  
6.To end, press  
.
EN  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Other functions  
STATUS/EXIT  
5.To end, press  
.
Switching the status display off or  
on  
6.Insert a cassette.  
7.Start the continuous playback with  
K B  
.
Along with the on screen menu, the status dis-  
play also displays information on the current  
operating status (counter, playback, recording,  
TV channel, etc.) on the TV screen.  
Blue Background on or off  
If you want the screen to be solid blue when a  
weak signal is received, set BLUE BACK-  
GROUND to 'ON'. The screen will be blue and  
the sound will be muted. Or, if you want to  
receive the weak signal, set BLUE BACK-  
GROUND to 'OFF'.  
MENU  
1.Press  
. The main menu will appear.  
K B L C  
2.Select 'VCR SET UP' using  
and  
B 1  
confrim with  
.
K B L C  
3.Select 'STATUS DISPLAY' with  
.
SELECT K L CHOOSE B  
MENU  
1.Press  
. The main menu will appear.  
K B L C  
2.Select 'VCR SET UP' using  
confrim with  
3.Select 'BLUE BACKGROUND' with  
and  
REPEAT PLAY  
STATUS DISPLAY  
[ON]  
[ON]  
B 1  
.
BLUE BACKGROUND[ON]  
K B  
L C  
.
END=EXIT  
SELECT K L CHOOSE B  
B 1  
REPEAT PLAY  
STATUS DISPLAY  
BLUE BACKGROUND [ON]  
[ON]  
[ON]  
4.Select 'ON' or 'OFF' with  
Which settings can I choose?  
.
'ON': Shows the status display for a few sec-  
onds only.  
'OFF': Switches off the status display.  
END=EXIT  
STATUS/EXIT  
5.To end, press  
.
4.Select 'OFF' (no blue background) or 'ON'  
B 1  
(blue background on) with  
.
Continuous playback  
STATUS/EXIT  
5.To end, press  
.
This function can be used to play a cassette  
over and over again. When the end of the cas-  
sette is reached, it will rewind and start from the  
beginning again. This function is activated or  
deactivated as follows.  
Parental control (Child lock)  
This function protects your TV-Video Combi from  
unwanted use. All button functions on the front  
of the machine are blocked.  
MENU  
1.Press  
. The main menu will appear.  
K B L C  
2.Select line 'VCR SET UP' using  
and confirm with  
Programmed recordings will still be recorded (in  
spite of the parental control) and cannot be  
interrupted.  
B 1  
.
K B L C  
3.Select 'REPEAT PLAY' using  
.
SELECT K L CHOOSE B  
MENU  
1.Press  
.
REPEAT PLAY  
STATUS DISPLAY  
[ON]  
[ON]  
The main menu will appear.  
K B  
L C  
2.Use  
UP'. Then press  
to select 'GENERAL SET  
B 1  
BLUE BACKGROUND[ON]  
.
K B  
L C  
3. Use  
4. Use  
to select 'CHILD LOCK'.  
END=EXIT  
B 1  
to select 'ON'.  
B 1  
4.Select function 'ON' with  
.
'If a button at the front of the machine is pressed  
while parental control is active, ’CHILD LOCK  
ACTIVE’ will appear on the screen for a few sec-  
onds.  
If you select 'OFF', continuous playback will be  
switched off.  
EN  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. Before you call an engineer  
If, contrary to expectation, you have any problems using this TV-Video Combi, it may be caused by the fol-  
lowing reasons.  
Your TV-Video Combi does not respond to any  
button being pressed:  
*There is no power supply: check the power supply.  
*Parental control is on:Switch the parental control off.  
*There is a technical problem: disconnect from the  
mains power supply for 5 minutes, then power-up  
again.  
If this doesn't help, you can reset your TV-Video  
Combi to default factory settings.  
Resetting devices to default factory settings  
<14PV203/07, 14PV460/07>  
*
’PDC’ switched on but ‘PDC time’ wrong: Enter  
‘PDC time’ exactly to the minute. Check your  
aerial connection.  
Smart Clock does not work  
*You have stored on programme number ‘P01’ a  
TV channel that does not transmit TELETEXT.  
Store on ‘P01’ a TV channel that transmits  
TELETEXT.  
*Poor TELETEXT reception. Store a TV channel  
on ‘P01’ with good TELETEXT reception.  
*You have not activated the Smart Clock func-  
tion. Switch the function ‘ON’.  
*
Warning: by doing so you will the information  
stored (TV channels, time and date, TIMER)  
will be cleared.  
1.Switch the TV-Video Combi to  
.
stand-by  
RECORD  
P -  
at the  
2.Press and hold  
same time for 2 seconds or more.  
Cassette is jammed in the TV-Video Combi  
and  
You can also call the customer service centre  
in your country.The telephone numbers can be  
found on the back of this instruction manual.  
Have the model number (MODEL NO) and the  
production number (PROD.NO.) of your TV-  
Video Combi ready.  
*
Don’t use force. Disconnect the set from the  
mains and reconnect it again after a few sec-  
onds.  
Remote control does not work  
*
*
*
Remote control is not pointed at the TV-Video  
Combi.  
Take out the batteries, wait for 10 seconds and  
place them back in the remote control.  
Batteries have run out. Change the batteries.  
No picture when you play a cassette  
There is no recording on the cassette.  
*
Poor picture quality when you play a cas-  
sette  
*
The cassette is badly worn-out or of poor qual-  
ity. Use a new cassette.  
*
Tracking is not properly adjusted. Turn to sec-  
tion ‘Manual Tracking’.  
No recording possible  
*
The TV channel you want to record is not  
stored or you selected the wrong programme  
number: check TV channels stored.  
*
A cassette was inserted that does not have the  
security tab (cannot be used to record): Insert  
a cassette with an intact security tab or change  
cassette. For more information, please see the  
section ‘Preventing accidental erasing of cas-  
settes’ in chapter ‘Manual Recording’.  
EN  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PHILIPS NORGE AS  
Sandstuveien 70,  
PO Box 1, Manglerud  
N-0612 Oslo  
PHILIPS AUSTRIA GMBH  
Triesterstrasse 64  
1101 Wien  
AUSTRIA  
Tel: 0810 001 203  
PHILIPS PORTUGUESA, S.A.  
Consumer Information Centre  
Rua Dr. António Loureiro Borge, nr. 5  
Arquiparque, Miraflores  
P-2795 L-A-VEHLA  
NORWAY  
Phone: 2274 8250  
PORTUGAL  
Phone: 021-4163063  
OY PHILIPS AB  
Sinikalliontie 3,  
02630 Espoo  
PHILIPS INFO CENTER  
Alexanderstrasse 1  
20099 Hamburg  
PHILIPS CE, The Philips Centre,  
420 - 430 London Road,  
Croydon, Surrey  
FINLAND  
GERMANY  
CR9 3 QR  
puh. 09 615 80 250  
Tel: 0180-53 56 767  
UNITED KINGDOM  
Phone: 0208-665-6350  
PHILIPS KUNDTJÄNST SERVICE CONSOMMATEURS PHILIPS  
PHILIPS KUNDECENTER  
Frederikskaj 6,  
1780 København V  
DANMARK  
Kottbygatan 7,  
Akalla,  
16485 Stockholm  
SWEDEN  
BP 0101  
75622 Paris Cédex 13  
FRANCE  
Phone: 0825-889 789  
Tlf: 8088 2814  
Phone: 08-598 52 250  
PHILIPS POLSKA  
Al. Jerozolimskie 195B  
02-222 Warszawa  
POLSKA  
PHILIPS ELECTRONICS IRELAND LIMITED  
Consumer Information Centre  
Newstead, Clonskeagh  
DUBLIN 14  
Phone: 01-7640292  
PHILIPS REPRESENTATION OFFICE  
Ul. Usacheva 35a  
119048 MOSCOW  
RUSSIA  
Phone: 095-937 9300  
TEL.: (022)-571-0-571  
PHILIPS CONSUMER ELECTRONICS  
Servizio Consumatori  
Via Casati 23  
20052 Monza - Milano  
ITALY  
PHILIPS INFO CENTER  
Fegistrasse 5  
8957 Spreitenbach  
SUISSE  
Tel.: 0844-800 544  
Phone: 800 820026  
PHILIPS Iberia, S.A.  
C/Martinez Villergas, 49  
28027 MADRID  
SPAIN  
Phone: 902-11 33 84  
PHILIPS MAGYARORSZÁG KFT.  
Fehérvári út 84/a.  
Budapest 1119  
HUNGARY  
Phone: (01)-382-1700  
PHILIPS CUSTOMER CARE CENTER  
Twee Stationsstraat 80/  
80 Rue des Deux Gares  
1070 BRUSSEL/BRUXELLES  
BELGIUM (for BENELUX)  
Tel: 070-222303  
PHILIPS CONSUMENTENLIJN  
Postbus 102 5600 AC Eindhoven  
NEDERLAND  
Tel.: 0900-8406  
T6310EZ-I * * * *  
(0EMN01990)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Computer Keyboard KBD4000 User Manual
Philips Bottle Warmer SCF146 02 User Manual
Philips Stereo System FW V220 21 User Manual
Philips Switch SWV3053 User Manual
Pioneer DVR DVR 540H S User Manual
Polaroid Portable DVD Player PDU 0743 User Manual
Polycom Cordless Telephone 1725 36097 001 User Manual
Polycom Headphones CX5100 User Manual
Poulan Tiller MRT500 User Manual
ProForm Treadmill 831296052 User Manual